v: 3

#trace:
#  path: "controller.trace"

#profile:
#  memory:
#    path: ctrl.memprof

db:                     "/home/ubuntu/local/etc/zrok.io/db/ctrl.db"

identity:
  cert:                 "/home/ubuntu/local/etc/zrok.io/pki/intermediate/certs/ctrl-client.cert"
  server_cert:          "/home/ubuntu/local/etc/zrok.io/pki/intermediate/certs/ctrl-server.chain.pem"
  key:                  "/home/ubuntu/local/etc/zrok.io/pki/intermediate/keys/ctrl-server.key"
  ca:                   "/home/ubuntu/local/etc/zrok.io/pki/cas.pem"

# Network Configuration
#
# Configure how the controller will establish and manage the overlay network, and routing operations on top of
# the network.
#
#network:

  # routeTimeoutSeconds controls the number of seconds the controller will wait for a route attempt to succeed.
  #routeTimeoutSeconds:  10

  # createCircuitRetries controls the number of retries that will be attempted to create a path (and terminate it)
  # for new circuits.
  #createCircuitRetries: 2  

  # pendingLinkTimeoutSeconds controls how long we'll wait before creating a new link between routers where
  # there isn't an established link, but a link request has been sent
  #pendingLinkTimeoutSeconds: 10

  # Defines the period that the controller re-evaluates the performance of all of the circuits
  # running on the network.
  #
  #cycleSeconds:         15
  
  # Sets router minimum cost. Defaults to 10
  #minRouterCost: 10

  # Sets how often a new control channel connection can take over for a router with an existing control channel connection
  # Defaults to 1 minute
  #routerConnectChurnLimit: 1m

  # Sets the latency of link when it's first created. Will be overwritten as soon as latency from the link is actually
  # reported from the routers. Defaults to 65 seconds.
  #initialLinkLatency: 65s
  
  #smart:
    #
    # Defines the fractional upper limit of underperforming circuits that are candidates to be re-routed. If 
    # smart routing detects 100 circuits that are underperforming, and `smart.rerouteFraction` is set to `0.02`,
    # then the upper limit of circuits that will be re-routed in this `cycleSeconds` period will be limited to 
    # 2 (2% of 100). 
    #
    #rerouteFraction:    0.02
    # 
    # Defines the hard upper limit of underperforming circuits that are candidates to be re-routed. If smart 
    # routing detects 100 circuits that are underperforming, and `smart.rerouteCap` is set to `1`, and 
    # `smart.rerouteFraction` is set to `0.02`, then the upper limit of circuits that will be re-routed in this 
    # `cycleSeconds` period will be limited to 1.
    #
    #rerouteCap:         4  

# the endpoint that routers will connect to the controller over.
ctrl:
  #options:
  # (optional) settings
  # set the maximum number of connect requests that are buffered and waiting to be acknowledged (1 to 5000, default 1)
  #maxQueuedConnects:      1
  # the maximum number of connects that have  begun hello synchronization (1 to 1000, default 16)
  #maxOutstandingConnects: 16
  # the number of milliseconds to wait before a hello synchronization fails and closes the connection (30ms to 60000ms, default: 1000ms)
  #connectTimeoutMs:       1000
  listener:             tls:0.0.0.0:6262

# the endpoint that management tools connect to the controller over.
mgmt:
  #options:
  # (optional) settings
  # set the maximum number of connect requests that are buffered and waiting to be acknowledged (1 to 5000, default 1)
  #maxQueuedConnects:      1
  # the maximum number of connects that have  begun hello synchronization (1 to 1000, default 16)
  #maxOutstandingConnects: 16
  # the number of milliseconds to wait before a hello synchronization fails and closes the connection (30ms to 60000ms, default: 1000ms)
  #connectTimeoutMs:       1000
  listener:             tls:0.0.0.0:10000

#metrics:
#  influxdb:
#    url:                http://localhost:8086
#    database:           ziti

# xctrl_example
#
#example:
#  enabled:              false
#  delay:                5s

healthChecks:
  boltCheck:
    # How often to try entering a bolt read tx. Defaults to 30 seconds
    interval: 30s
    # When to time out the check. Defaults to 20 seconds
    timeout: 20s
    # How long to wait before starting the check. Defaults to 30 seconds
    initialDelay: 30s

# By having an 'edge' section defined, the ziti-controller will attempt to parse the edge configuration. Removing this
# section, commenting out, or altering the name of the section will cause the edge to not run.
edge:
  # This section represents the configuration of the Edge API that is served over HTTPS
  api:
    #(optional, default 90s) Alters how frequently heartbeat and last activity values are persisted
    # activityUpdateInterval: 90s
    #(optional, default 250) The number of API Sessions updated for last activity per transaction
    # activityUpdateBatchSize: 250
    # sessionTimeout - optional, default 30m
    # The number of minutes before an Edge API session will time out. Timeouts are reset by
    # API requests and connections that are maintained to Edge Routers
    sessionTimeout: 30m
    # address - required
    # The default address (host:port) to use for enrollment for the Client API. This value must match one of the addresses
    # defined in this Controller.WebListener.'s bindPoints.
    address: api.zrok.io:1280
  # This section is used to define option that are used during enrollment of Edge Routers, Ziti Edge Identities.
  enrollment:
    # signingCert - required
    # A Ziti Identity configuration section that specifically makes use of the cert and key fields to define
    # a signing certificate from the PKI that the Ziti environment is using to sign certificates. The signingCert.cert
    # will be added to the /.well-known CA store that is used to bootstrap trust with the Ziti Controller.
    signingCert:
      cert: /home/ubuntu/local/etc/zrok.io/pki/signing-intermediate/certs/signing-intermediate.cert
      key:  /home/ubuntu/local/etc/zrok.io/pki/signing-intermediate/keys/signing-intermediate.key
    # edgeIdentity - optional
    # A section for identity enrollment specific settings
    edgeIdentity:
      # duration - optional, default 180m
      # The length of time that a Ziti Edge Identity enrollment should remain valid. After
      # this duration, the enrollment will expire and no longer be usable.
      duration: 180m
    # edgeRouter - Optional
    # A section for edge router enrollment specific settings.
    edgeRouter:
      # duration - optional, default 180m
      # The length of time that a Ziti Edge Router enrollment should remain valid. After
      # this duration, the enrollment will expire and no longer be usable.
      duration: 180m

# web
# Defines webListeners that will be hosted by the controller. Each webListener can host many APIs and be bound to many
# bind points.
web:
  # name - required
  # Provides a name for this listener, used for logging output. Not required to be unique, but is highly suggested.
  - name: client-management
    # bindPoints - required
    # One or more bind points are required. A bind point specifies an interface (interface:port string) that defines
    # where on the host machine the webListener will listen and the address (host:port) that should be used to
    # publicly address the webListener(i.e. mydomain.com, localhost, 127.0.0.1). This public address may be used for
    # incoming address resolution as well as used in responses in the API.
    bindPoints:
      #interface - required
      # A host:port string on which network interface to listen on. 0.0.0.0 will listen on all interfaces
      - interface: 0.0.0.0:1280
        # address - required
        # The public address that external incoming requests will be able to resolve. Used in request processing and
        # response content that requires full host:port/path addresses.
        address: api.zrok.io:1280
    # identity - optional
    # Allows the webListener to have a specific identity instead of defaulting to the root 'identity' section.
    identity:
      ca:          "/home/ubuntu/local/etc/zrok.io/pki/intermediate/certs/intermediate.cert"
      key:         "/home/ubuntu/local/etc/zrok.io/pki/intermediate/keys/ctrl-server.key"
      server_cert: "/home/ubuntu/local/etc/zrok.io/pki/intermediate/certs/ctrl-server.chain.pem"
      cert:        "/home/ubuntu/local/etc/zrok.io/pki/intermediate/certs/ctrl-client.cert"
    # options - optional
    # Allows the specification of webListener level options - mainly dealing with HTTP/TLS settings. These options are
    # used for all http servers started by the current webListener.
    options:
      # idleTimeoutMs - optional, default 5000ms
      # The maximum amount of idle time in milliseconds allowed for pipelined HTTP requests. Setting this too high
      # can cause resources on the host to be consumed as clients remain connected and idle. Lowering this value
      # will cause clients to reconnect on subsequent HTTPs requests.
      idleTimeout: 5000ms  #http timeouts, new
      # readTimeoutMs - optional, default 5000ms
      # The maximum amount of time in milliseconds http servers will wait to read the first incoming requests. A higher
      # value risks consuming resources on the host with clients that are acting bad faith or suffering from high latency
      # or packet loss. A lower value can risk losing connections to high latency/packet loss clients.
      readTimeout: 5000ms
      # writeTimeoutMs - optional, default 100000ms
      # The total maximum time in milliseconds that the http server will wait for a single requests to be received and
      # responded too. A higher value can allow long-running requests to consume resources on the host. A lower value
      # can risk ending requests before the server has a chance to respond.
      writeTimeout: 100000ms
      # minTLSVersion - optional, default TLS1.2
      # The minimum version of TSL to support
      minTLSVersion: TLS1.2
      # maxTLSVersion - optional, default TLS1.3
      # The maximum version of TSL to support
      maxTLSVersion: TLS1.3
    # apis - required
    # Allows one or more APIs to be bound to this webListener
    apis:
      # binding - required
      # Specifies an API to bind to this webListener. Built-in APIs are
      #   - edge-management
      #   - edge-client
      #   - fabric-management
      - binding: edge-management
        # options - arg optional/required
        # This section is used to define values that are specified by the API they are associated with.
        # These settings are per API. The example below is for the 'edge-api' and contains both optional values and
        # required values.
        options: { }
      - binding: edge-client
        options: { }
      - binding: fabric
        options: { }