nushell/crates/nu-parser/src/hir.rs

487 lines
16 KiB
Rust
Raw Normal View History

pub(crate) mod baseline_parse;
pub(crate) mod binary;
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
pub(crate) mod expand_external_tokens;
pub(crate) mod external_command;
pub(crate) mod named;
pub(crate) mod path;
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
pub(crate) mod range;
pub mod syntax_shape;
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
pub(crate) mod tokens_iterator;
2019-06-22 03:36:57 +02:00
use crate::hir::syntax_shape::Member;
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
use crate::parse::operator::CompareOperator;
use crate::parse::parser::Number;
use crate::parse::unit::Unit;
2019-06-22 03:36:57 +02:00
use derive_new::new;
use getset::Getters;
use nu_protocol::{PathMember, ShellTypeName};
use nu_source::{
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
b, DebugDocBuilder, HasSpan, IntoSpanned, PrettyDebug, PrettyDebugRefineKind,
PrettyDebugWithSource, Span, Spanned,
};
2019-08-02 21:15:07 +02:00
use serde::{Deserialize, Serialize};
Add support for ~ expansion This ended up being a bit of a yak shave. The basic idea in this commit is to expand `~` in paths, but only in paths. The way this is accomplished is by doing the expansion inside of the code that parses literal syntax for `SyntaxType::Path`. As a quick refresher: every command is entitled to expand its arguments in a custom way. While this could in theory be used for general-purpose macros, today the expansion facility is limited to syntactic hints. For example, the syntax `where cpu > 0` expands under the hood to `where { $it.cpu > 0 }`. This happens because the first argument to `where` is defined as a `SyntaxType::Block`, and the parser coerces binary expressions whose left-hand-side looks like a member into a block when the command is expecting one. This is mildly more magical than what most programming languages would do, but we believe that it makes sense to allow commands to fine-tune the syntax because of the domain nushell is in (command-line shells). The syntactic expansions supported by this facility are relatively limited. For example, we don't allow `$it` to become a bare word, simply because the command asks for a string in the relevant position. That would quickly become more confusing than it's worth. This PR adds a new `SyntaxType` rule: `SyntaxType::Path`. When a command declares a parameter as a `SyntaxType::Path`, string literals and bare words passed as an argument to that parameter are processed using the path expansion rules. Right now, that only means that `~` is expanded into the home directory, but additional rules are possible in the future. By restricting this expansion to a syntactic expansion when passed as an argument to a command expecting a path, we avoid making `~` a generally reserved character. This will also allow us to give good tab completion for paths with `~` characters in them when a command is expecting a path. In order to accomplish the above, this commit changes the parsing functions to take a `Context` instead of just a `CommandRegistry`. From the perspective of macro expansion, you can think of the `CommandRegistry` as a dictionary of in-scope macros, and the `Context` as the compile-time state used in expansion. This could gain additional functionality over time as we find more uses for the expansion system.
2019-08-26 21:21:03 +02:00
use std::path::PathBuf;
2019-06-22 03:36:57 +02:00
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
use crate::parse::number::RawNumber;
pub(crate) use self::binary::Binary;
pub(crate) use self::path::Path;
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
pub(crate) use self::range::Range;
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
pub(crate) use self::tokens_iterator::TokensIterator;
2019-06-22 03:36:57 +02:00
pub use self::external_command::ExternalCommand;
pub use self::named::{NamedArguments, NamedValue};
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
#[derive(Debug, Clone)]
pub struct Signature {
unspanned: nu_protocol::Signature,
span: Span,
}
impl Signature {
pub fn new(unspanned: nu_protocol::Signature, span: impl Into<Span>) -> Signature {
Signature {
unspanned,
span: span.into(),
}
}
}
impl HasSpan for Signature {
fn span(&self) -> Span {
self.span
}
}
impl PrettyDebugWithSource for Signature {
fn pretty_debug(&self, source: &str) -> DebugDocBuilder {
self.unspanned.pretty_debug(source)
}
}
2019-07-24 00:22:11 +02:00
#[derive(Debug, Clone, Eq, PartialEq, Getters, Serialize, Deserialize, new)]
2019-06-22 03:36:57 +02:00
pub struct Call {
#[get = "pub(crate)"]
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub head: Box<SpannedExpression>,
#[get = "pub(crate)"]
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub positional: Option<Vec<SpannedExpression>>,
#[get = "pub(crate)"]
2019-08-29 05:53:45 +02:00
pub named: Option<NamedArguments>,
pub span: Span,
}
Add --help for commands (#1226) * WIP --help works for PerItemCommands. * De-linting * Add more comments (#1228) * Add some more docs * More docs * More docs * More docs (#1229) * Add some more docs * More docs * More docs * Add more docs * External commands: wrap values that contain spaces in quotes (#1214) (#1220) * External commands: wrap values that contain spaces in quotes (#1214) * Add fn's argument_contains_whitespace & add_quotes (#1214) * Fix formatting with cargo fmt * Don't wrap argument in quotes when $it is already quoted (#1214) * Implement --help for internal commands * Externals now spawn independently. (#1230) This commit changes the way we shell out externals when using the `"$it"` argument. Also pipes per row to an external's stdin if no `"$it"` argument is present for external commands. Further separation of logic (preparing the external's command arguments, getting the data for piping, emitting values, spawning processes) will give us a better idea for lower level details regarding external commands until we can find the right abstractions for making them more generic and unify within the pipeline calling logic of Nu internal's and external's. * Poll externals quicker. (#1231) * WIP --help works for PerItemCommands. * De-linting * Implement --help for internal commands * Make having --help the default * Update test to include new default switch Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Koenraad Verheyden <mail@koenraadverheyden.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-17 23:46:18 +01:00
impl Call {
pub fn switch_preset(&self, switch: &str) -> bool {
self.named
.as_ref()
.and_then(|n| n.get(switch))
.map(|t| match t {
NamedValue::PresentSwitch(_) => true,
_ => false,
})
.unwrap_or(false)
}
}
impl PrettyDebugWithSource for Call {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
fn refined_pretty_debug(&self, refine: PrettyDebugRefineKind, source: &str) -> DebugDocBuilder {
match refine {
PrettyDebugRefineKind::ContextFree => self.pretty_debug(source),
PrettyDebugRefineKind::WithContext => {
self.head
.refined_pretty_debug(PrettyDebugRefineKind::WithContext, source)
+ b::preceded_option(
Some(b::space()),
self.positional.as_ref().map(|pos| {
b::intersperse(
pos.iter().map(|expr| {
expr.refined_pretty_debug(
PrettyDebugRefineKind::WithContext,
source,
)
}),
b::space(),
)
}),
)
+ b::preceded_option(
Some(b::space()),
self.named.as_ref().map(|named| {
named.refined_pretty_debug(PrettyDebugRefineKind::WithContext, source)
}),
)
}
}
}
fn pretty_debug(&self, source: &str) -> DebugDocBuilder {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
b::typed(
"call",
self.refined_pretty_debug(PrettyDebugRefineKind::WithContext, source),
)
}
2019-06-22 03:36:57 +02:00
}
2019-07-24 00:22:11 +02:00
#[derive(Debug, Clone, Eq, PartialEq, Ord, PartialOrd, Hash, Serialize, Deserialize)]
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub enum Expression {
2019-06-22 03:36:57 +02:00
Literal(Literal),
ExternalWord,
2019-07-24 00:22:11 +02:00
Synthetic(Synthetic),
2019-06-22 03:36:57 +02:00
Variable(Variable),
Binary(Box<Binary>),
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
Range(Box<Range>),
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Block(Vec<SpannedExpression>),
List(Vec<SpannedExpression>),
2019-06-22 03:36:57 +02:00
Path(Box<Path>),
Add support for ~ expansion This ended up being a bit of a yak shave. The basic idea in this commit is to expand `~` in paths, but only in paths. The way this is accomplished is by doing the expansion inside of the code that parses literal syntax for `SyntaxType::Path`. As a quick refresher: every command is entitled to expand its arguments in a custom way. While this could in theory be used for general-purpose macros, today the expansion facility is limited to syntactic hints. For example, the syntax `where cpu > 0` expands under the hood to `where { $it.cpu > 0 }`. This happens because the first argument to `where` is defined as a `SyntaxType::Block`, and the parser coerces binary expressions whose left-hand-side looks like a member into a block when the command is expecting one. This is mildly more magical than what most programming languages would do, but we believe that it makes sense to allow commands to fine-tune the syntax because of the domain nushell is in (command-line shells). The syntactic expansions supported by this facility are relatively limited. For example, we don't allow `$it` to become a bare word, simply because the command asks for a string in the relevant position. That would quickly become more confusing than it's worth. This PR adds a new `SyntaxType` rule: `SyntaxType::Path`. When a command declares a parameter as a `SyntaxType::Path`, string literals and bare words passed as an argument to that parameter are processed using the path expansion rules. Right now, that only means that `~` is expanded into the home directory, but additional rules are possible in the future. By restricting this expansion to a syntactic expansion when passed as an argument to a command expecting a path, we avoid making `~` a generally reserved character. This will also allow us to give good tab completion for paths with `~` characters in them when a command is expecting a path. In order to accomplish the above, this commit changes the parsing functions to take a `Context` instead of just a `CommandRegistry`. From the perspective of macro expansion, you can think of the `CommandRegistry` as a dictionary of in-scope macros, and the `Context` as the compile-time state used in expansion. This could gain additional functionality over time as we find more uses for the expansion system.
2019-08-26 21:21:03 +02:00
FilePath(PathBuf),
ExternalCommand(ExternalCommand),
Command(Span),
2019-06-22 03:36:57 +02:00
Boolean(bool),
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl ShellTypeName for Expression {
fn type_name(&self) -> &'static str {
match self {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Literal(literal) => literal.type_name(),
Expression::Synthetic(synthetic) => synthetic.type_name(),
Expression::Command(..) => "command",
Expression::ExternalWord => "external word",
Expression::FilePath(..) => "file path",
Expression::Variable(..) => "variable",
Expression::List(..) => "list",
Expression::Binary(..) => "binary",
Expression::Range(..) => "range",
Expression::Block(..) => "block",
Expression::Path(..) => "variable path",
Expression::Boolean(..) => "boolean",
Expression::ExternalCommand(..) => "external",
}
}
}
#[derive(Debug, Clone, Eq, PartialEq, Ord, PartialOrd, Hash, Serialize, Deserialize)]
pub enum Synthetic {
String(String),
}
impl ShellTypeName for Synthetic {
fn type_name(&self) -> &'static str {
match self {
Synthetic::String(_) => "string",
}
}
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl IntoSpanned for Expression {
type Output = SpannedExpression;
fn into_spanned(self, span: impl Into<Span>) -> Self::Output {
SpannedExpression {
expr: self,
span: span.into(),
}
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
}
impl Expression {
pub fn into_expr(self, span: impl Into<Span>) -> SpannedExpression {
self.into_spanned(span)
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn into_unspanned_expr(self) -> SpannedExpression {
SpannedExpression {
expr: self,
span: Span::unknown(),
}
}
}
#[derive(Debug, Clone, Eq, PartialEq, Ord, PartialOrd, Hash, Serialize, Deserialize)]
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub struct SpannedExpression {
pub expr: Expression,
pub span: Span,
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl std::ops::Deref for SpannedExpression {
type Target = Expression;
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
fn deref(&self) -> &Expression {
&self.expr
}
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl HasSpan for SpannedExpression {
fn span(&self) -> Span {
self.span
}
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl ShellTypeName for SpannedExpression {
fn type_name(&self) -> &'static str {
self.expr.type_name()
}
}
impl PrettyDebugWithSource for SpannedExpression {
fn refined_pretty_debug(&self, refine: PrettyDebugRefineKind, source: &str) -> DebugDocBuilder {
match refine {
PrettyDebugRefineKind::ContextFree => self.refined_pretty_debug(refine, source),
PrettyDebugRefineKind::WithContext => match &self.expr {
Expression::Literal(literal) => literal
.clone()
.into_spanned(self.span)
.refined_pretty_debug(refine, source),
Expression::ExternalWord => {
b::delimit("e\"", b::primitive(self.span.slice(source)), "\"").group()
}
Expression::Synthetic(s) => match s {
Synthetic::String(_) => {
b::delimit("s\"", b::primitive(self.span.slice(source)), "\"").group()
}
},
Expression::Variable(Variable::Other(_)) => b::keyword(self.span.slice(source)),
Expression::Variable(Variable::It(_)) => b::keyword("$it"),
Expression::Binary(binary) => binary.pretty_debug(source),
Expression::Range(range) => range.pretty_debug(source),
Expression::Block(_) => b::opaque("block"),
Expression::List(list) => b::delimit(
"[",
b::intersperse(
list.iter()
.map(|item| item.refined_pretty_debug(refine, source)),
b::space(),
),
"]",
),
Expression::Path(path) => path.pretty_debug(source),
Expression::FilePath(path) => b::typed("path", b::primitive(path.display())),
Expression::ExternalCommand(external) => {
b::keyword("^") + b::keyword(external.name.slice(source))
}
Expression::Command(command) => b::keyword(command.slice(source)),
Expression::Boolean(boolean) => match boolean {
true => b::primitive("$yes"),
false => b::primitive("$no"),
},
},
}
}
fn pretty_debug(&self, source: &str) -> DebugDocBuilder {
match &self.expr {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Literal(literal) => {
literal.clone().into_spanned(self.span).pretty_debug(source)
}
Expression::ExternalWord => {
b::typed("external word", b::primitive(self.span.slice(source)))
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Synthetic(s) => match s {
Synthetic::String(s) => b::typed("synthetic", b::primitive(format!("{:?}", s))),
},
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Variable(Variable::Other(_)) => b::keyword(self.span.slice(source)),
Expression::Variable(Variable::It(_)) => b::keyword("$it"),
Expression::Binary(binary) => binary.pretty_debug(source),
Expression::Range(range) => range.pretty_debug(source),
Expression::Block(_) => b::opaque("block"),
Expression::List(list) => b::delimit(
"[",
b::intersperse(
list.iter().map(|item| item.pretty_debug(source)),
b::space(),
),
"]",
),
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Path(path) => path.pretty_debug(source),
Expression::FilePath(path) => b::typed("path", b::primitive(path.display())),
Expression::ExternalCommand(external) => b::typed(
"command",
b::keyword("^") + b::primitive(external.name.slice(source)),
),
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Command(command) => {
b::typed("command", b::primitive(command.slice(source)))
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Boolean(boolean) => match boolean {
true => b::primitive("$yes"),
false => b::primitive("$no"),
},
}
}
}
2019-06-22 03:36:57 +02:00
impl Expression {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn number(i: impl Into<Number>) -> Expression {
Expression::Literal(Literal::Number(i.into()))
2019-06-22 03:36:57 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn size(i: impl Into<Number>, unit: impl Into<Unit>) -> Expression {
Expression::Literal(Literal::Size(i.into(), unit.into()))
2019-06-22 03:36:57 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn string(inner: impl Into<Span>) -> Expression {
Expression::Literal(Literal::String(inner.into()))
2019-07-24 00:22:11 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn synthetic_string(string: impl Into<String>) -> Expression {
Expression::Synthetic(Synthetic::String(string.into()))
2019-06-22 03:36:57 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn column_path(members: Vec<Member>) -> Expression {
Expression::Literal(Literal::ColumnPath(members))
2019-11-04 16:47:03 +01:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn path(head: SpannedExpression, tail: Vec<impl Into<PathMember>>) -> Expression {
2019-11-04 16:47:03 +01:00
let tail = tail.into_iter().map(|t| t.into()).collect();
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Path(Box::new(Path::new(head, tail)))
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn dot_member(head: SpannedExpression, next: impl Into<PathMember>) -> Expression {
let SpannedExpression { expr: item, span } = head;
2019-11-04 16:47:03 +01:00
let next = next.into();
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
match item {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Path(path) => {
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
let (head, mut tail) = path.parts();
2019-11-04 16:47:03 +01:00
tail.push(next);
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::path(head, tail)
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
other => Expression::path(other.into_expr(span), vec![next]),
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
}
pub fn infix(
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
left: SpannedExpression,
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
op: Spanned<impl Into<CompareOperator>>,
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
right: SpannedExpression,
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
) -> Expression {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Expression::Binary(Box::new(Binary::new(left, op.map(|o| o.into()), right)))
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn range(left: SpannedExpression, op: Span, right: SpannedExpression) -> Expression {
Expression::Range(Box::new(Range::new(left, op, right)))
Add Range and start Signature support This commit contains two improvements: - Support for a Range syntax (and a corresponding Range value) - Work towards a signature syntax Implementing the Range syntax resulted in cleaning up how operators in the core syntax works. There are now two kinds of infix operators - tight operators (`.` and `..`) - loose operators Tight operators may not be interspersed (`$it.left..$it.right` is a syntax error). Loose operators require whitespace on both sides of the operator, and can be arbitrarily interspersed. Precedence is left to right in the core syntax. Note that delimited syntax (like `( ... )` or `[ ... ]`) is a single token node in the core syntax. A single token node can be parsed from beginning to end in a context-free manner. The rule for `.` is `<token node>.<member>`. The rule for `..` is `<token node>..<token node>`. Loose operators all have the same syntactic rule: `<token node><space><loose op><space><token node>`. The second aspect of this pull request is the beginning of support for a signature syntax. Before implementing signatures, a necessary prerequisite is for the core syntax to support multi-line programs. That work establishes a few things: - `;` and newlines are handled in the core grammar, and both count as "separators" - line comments begin with `#` and continue until the end of the line In this commit, multi-token productions in the core grammar can use separators interchangably with spaces. However, I think we will ultimately want a different rule preventing separators from occurring before an infix operator, so that the end of a line is always unambiguous. This would avoid gratuitous differences between modules and repl usage. We already effectively have this rule, because otherwise `x<newline> | y` would be a single pipeline, but of course that wouldn't work.
2019-12-04 22:14:52 +01:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn file_path(path: impl Into<PathBuf>) -> Expression {
Expression::FilePath(path.into())
Add support for ~ expansion This ended up being a bit of a yak shave. The basic idea in this commit is to expand `~` in paths, but only in paths. The way this is accomplished is by doing the expansion inside of the code that parses literal syntax for `SyntaxType::Path`. As a quick refresher: every command is entitled to expand its arguments in a custom way. While this could in theory be used for general-purpose macros, today the expansion facility is limited to syntactic hints. For example, the syntax `where cpu > 0` expands under the hood to `where { $it.cpu > 0 }`. This happens because the first argument to `where` is defined as a `SyntaxType::Block`, and the parser coerces binary expressions whose left-hand-side looks like a member into a block when the command is expecting one. This is mildly more magical than what most programming languages would do, but we believe that it makes sense to allow commands to fine-tune the syntax because of the domain nushell is in (command-line shells). The syntactic expansions supported by this facility are relatively limited. For example, we don't allow `$it` to become a bare word, simply because the command asks for a string in the relevant position. That would quickly become more confusing than it's worth. This PR adds a new `SyntaxType` rule: `SyntaxType::Path`. When a command declares a parameter as a `SyntaxType::Path`, string literals and bare words passed as an argument to that parameter are processed using the path expansion rules. Right now, that only means that `~` is expanded into the home directory, but additional rules are possible in the future. By restricting this expansion to a syntactic expansion when passed as an argument to a command expecting a path, we avoid making `~` a generally reserved character. This will also allow us to give good tab completion for paths with `~` characters in them when a command is expecting a path. In order to accomplish the above, this commit changes the parsing functions to take a `Context` instead of just a `CommandRegistry`. From the perspective of macro expansion, you can think of the `CommandRegistry` as a dictionary of in-scope macros, and the `Context` as the compile-time state used in expansion. This could gain additional functionality over time as we find more uses for the expansion system.
2019-08-26 21:21:03 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn list(list: Vec<SpannedExpression>) -> Expression {
Expression::List(list)
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn bare() -> Expression {
Expression::Literal(Literal::Bare)
2019-06-22 03:36:57 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn pattern(inner: impl Into<String>) -> Expression {
Expression::Literal(Literal::GlobPattern(inner.into()))
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn variable(inner: impl Into<Span>) -> Expression {
Expression::Variable(Variable::Other(inner.into()))
2019-06-22 03:36:57 +02:00
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn external_command(inner: impl Into<Span>) -> Expression {
Expression::ExternalCommand(ExternalCommand::new(inner.into()))
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub fn it_variable(inner: impl Into<Span>) -> Expression {
Expression::Variable(Variable::It(inner.into()))
2019-07-24 00:22:11 +02:00
}
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl From<Spanned<Path>> for SpannedExpression {
fn from(path: Spanned<Path>) -> SpannedExpression {
Expression::Path(Box::new(path.item)).into_expr(path.span)
}
}
/// Literals are expressions that are:
///
/// 1. Copy
/// 2. Can be evaluated without additional context
/// 3. Evaluation cannot produce an error
#[derive(Debug, Clone, Eq, PartialEq, Ord, PartialOrd, Hash, Serialize, Deserialize)]
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub enum Literal {
Number(Number),
Size(Number, Unit),
String(Span),
2019-10-27 02:01:58 +01:00
GlobPattern(String),
2019-11-04 16:47:03 +01:00
ColumnPath(Vec<Member>),
2019-06-22 03:36:57 +02:00
Bare,
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl Literal {
pub fn into_spanned(self, span: impl Into<Span>) -> SpannedLiteral {
SpannedLiteral {
literal: self,
span: span.into(),
}
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
}
#[derive(Debug, Clone, Eq, PartialEq, Ord, PartialOrd, Hash, Serialize, Deserialize)]
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
pub struct SpannedLiteral {
pub literal: Literal,
pub span: Span,
Overhaul the expansion system The main thrust of this (very large) commit is an overhaul of the expansion system. The parsing pipeline is: - Lightly parse the source file for atoms, basic delimiters and pipeline structure into a token tree - Expand the token tree into a HIR (high-level intermediate representation) based upon the baseline syntax rules for expressions and the syntactic shape of commands. Somewhat non-traditionally, nu doesn't have an AST at all. It goes directly from the token tree, which doesn't represent many important distinctions (like the difference between `hello` and `5KB`) directly into a high-level representation that doesn't have a direct correspondence to the source code. At a high level, nu commands work like macros, in the sense that the syntactic shape of the invocation of a command depends on the definition of a command. However, commands do not have the ability to perform unrestricted expansions of the token tree. Instead, they describe their arguments in terms of syntactic shapes, and the expander expands the token tree into HIR based upon that definition. For example, the `where` command says that it takes a block as its first required argument, and the description of the block syntactic shape expands the syntax `cpu > 10` into HIR that represents `{ $it.cpu > 10 }`. This commit overhauls that system so that the syntactic shapes are described in terms of a few new traits (`ExpandSyntax` and `ExpandExpression` are the primary ones) that are more composable than the previous system. The first big win of this new system is the addition of the `ColumnPath` shape, which looks like `cpu."max ghz"` or `package.version`. Previously, while a variable path could look like `$it.cpu."max ghz"`, the tail of a variable path could not be easily reused in other contexts. Now, that tail is its own syntactic shape, and it can be used as part of a command's signature. This cleans up commands like `inc`, `add` and `edit` as well as shorthand blocks, which can now look like `| where cpu."max ghz" > 10`
2019-09-18 00:26:27 +02:00
}
impl ShellTypeName for Literal {
fn type_name(&self) -> &'static str {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
match &self {
Literal::Number(..) => "number",
Literal::Size(..) => "size",
Literal::String(..) => "string",
Literal::ColumnPath(..) => "column path",
Literal::Bare => "string",
Literal::GlobPattern(_) => "pattern",
2019-07-24 00:22:11 +02:00
}
}
}
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
impl PrettyDebugWithSource for SpannedLiteral {
fn refined_pretty_debug(&self, refine: PrettyDebugRefineKind, source: &str) -> DebugDocBuilder {
match refine {
PrettyDebugRefineKind::ContextFree => self.pretty_debug(source),
PrettyDebugRefineKind::WithContext => match &self.literal {
Literal::Number(number) => number.pretty(),
Literal::Size(number, unit) => (number.pretty() + unit.pretty()).group(),
Literal::String(string) => b::primitive(format!("{:?}", string.slice(source))),
Literal::GlobPattern(pattern) => b::primitive(pattern),
Literal::ColumnPath(path) => {
b::intersperse_with_source(path.iter(), b::space(), source)
}
Literal::Bare => b::delimit("b\"", b::primitive(self.span.slice(source)), "\""),
},
}
}
fn pretty_debug(&self, source: &str) -> DebugDocBuilder {
match &self.literal {
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Literal::Number(number) => number.pretty(),
Literal::Size(number, unit) => {
b::typed("size", (number.pretty() + unit.pretty()).group())
}
Literal::String(string) => b::typed(
"string",
b::primitive(format!("{:?}", string.slice(source))),
),
Literal::GlobPattern(pattern) => b::typed("pattern", b::primitive(pattern)),
Literal::ColumnPath(path) => b::typed(
"column path",
b::intersperse_with_source(path.iter(), b::space(), source),
),
Restructure and streamline token expansion (#1123) Restructure and streamline token expansion The purpose of this commit is to streamline the token expansion code, by removing aspects of the code that are no longer relevant, removing pointless duplication, and eliminating the need to pass the same arguments to `expand_syntax`. The first big-picture change in this commit is that instead of a handful of `expand_` functions, which take a TokensIterator and ExpandContext, a smaller number of methods on the `TokensIterator` do the same job. The second big-picture change in this commit is fully eliminating the coloring traits, making coloring a responsibility of the base expansion implementations. This also means that the coloring tracer is merged into the expansion tracer, so you can follow a single expansion and see how the expansion process produced colored tokens. One side effect of this change is that the expander itself is marginally more error-correcting. The error correction works by switching from structured expansion to `BackoffColoringMode` when an unexpected token is found, which guarantees that all spans of the source are colored, but may not be the most optimal error recovery strategy. That said, because `BackoffColoringMode` only extends as far as a closing delimiter (`)`, `]`, `}`) or pipe (`|`), it does result in fairly granular correction strategy. The current code still produces an `Err` (plus a complete list of colored shapes) from the parsing process if any errors are encountered, but this could easily be addressed now that the underlying expansion is error-correcting. This commit also colors any spans that are syntax errors in red, and causes the parser to include some additional information about what tokens were expected at any given point where an error was encountered, so that completions and hinting could be more robust in the future. Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com> Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
2020-01-21 23:45:03 +01:00
Literal::Bare => b::typed("bare", b::primitive(self.span.slice(source))),
}
}
}
2019-07-24 00:22:11 +02:00
#[derive(Debug, Clone, Eq, PartialEq, Ord, PartialOrd, Hash, Serialize, Deserialize)]
2019-06-22 03:36:57 +02:00
pub enum Variable {
It(Span),
Other(Span),
2019-06-22 03:36:57 +02:00
}