This pr fix clippy warnings in latest clippy version(1.72.0):
Unfortunally it's not easy to handle for [try
fold](https://rust-lang.github.io/rust-clippy/master/index.html#/manual_try_fold)
warning in `start command`
Refer to known issue:
> This lint doesn’t take into account whether a function does something
on the failure case, i.e., whether short-circuiting will affect
behavior. Refactoring to try_fold is not desirable in those cases.
That's the case for our code, which does something on the failure case.
So this pr is making a little refactor on `try_commands`.
# Description
Closes#10537. Basically error message was unhelpful, and this temporary
measure adds back the nice previous nushell error message. Ideally, we
would like to add a more permanent solution mentioned in the issue
[comments](https://github.com/nushell/nushell/issues/10537#issuecomment-1743686122),
but since we want to have `ucp` as `cp` on new release, this is hackier
but way simpler so this fix should do it.
Only downside is that now behavior differs from `uutils` in the sense
that:
```
uutils:
> cp a foo/ bar
ls bar
# foo/a
nushell:
>ucp a foo/ bar
# directory error (not copied) ....
```
So, since its non fatal error, uutils copies a, but nushell errors out
with nothing copied. If we go to option 3 mentioned above, then we can
decide what we want to do, and perhaps continue on a non fatal error.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
Implemented URL decoding as a url subcommand, created corresponding unit
tests. The logic, examples and descriptions were based on the existing
`url encode` command.
Resolves#10563
# Description
Added a new `url decode` command to compliment the existing `url
encode`, as proposed by myself in #10563.
It takes a string, list of strings or cell path and produces the
corresponding decoded strings.
# User-Facing Changes
New url subcommand `url decode`, as described above.
# Tests + Formatting
I've added unit tests for the new subcommand and ensured all actions
outlined below showed no issues.
- [x] `cargo fmt --all -- --check`
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
- [x] `cargo test --workspace`
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`
# Description
When referring to the type use `int` consistently. Only when referring
to the concept of integer numbers use `integer`.
- Fix `random integer` to `random int` tests
- Forgot in #10520
- Use int instead of integer in error messages
- Use int type name in bits commands
- Fix messages in `for` examples
- Use int typename in `into` commands
- Use int typename in rest of commands
- Report errors in `nu-protocol` with int typename
Work for #10332
# User-Facing Changes
User errorrs should now use `int` so you can easily find the necessary
commands or type annotations.
# Tests + Formatting
Only two tests found that needed updating
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
> [!NOTE]
> This PR description originally used examples where the `generator`
closure returned a list. It has since been updated to use records
instead.
The `unfold` command allows users to dynamically generate streams of
data. The stream is generated by repeatedly invoking a `generator`
closure. The `generator` closure accepts a single argument and returns a
record containing two optional keys: 'out' and 'next'. Each invocation,
the 'out' value, if present, is added to the stream. If a 'next' key is
present, it is used as the next argument to the closure, otherwise
generation stops.
The name "unfold" is borrowed from other functional-programming
languages. Whereas `fold` (or `reduce`) takes a stream of values and
outputs a single value, `unfold` takes a single value and outputs a
stream of values.
### Examples
A common example of using `unfold` is to generate a fibbonacci sequence.
See
[here](6ffdac103c/src/sources.rs (L65))
for an example of this in rust's `itertools`.
```nushell
> unfold [0, 1] {|fib| {out: $fib.0, next: [$fib.1, ($fib.0 + $fib.1)]} } | first 10
───┬────
0 │ 0
1 │ 1
2 │ 1
3 │ 2
4 │ 3
5 │ 5
6 │ 8
7 │ 13
8 │ 21
9 │ 34
───┴────
```
This command is particularly useful when consuming paginated APIs, like
Github's. Previously, nushell users might use a loop and buffer
responses into a list, before returning all responses at once. However,
this behavior is not desirable if the result result is very large. Using
`unfold` avoids buffering and allows subsequent pipeline stages to use
the data concurrently, as it's being fetched.
#### Before
```nushell
mut pages = []
for page in 1.. {
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
$pages = ($pages | append $resp)
if ($resp | length) < $PAGE_SIZE {
break
}
}
$pages
```
#### After
```nu
unfold 1 {|page|
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
if ($resp | length) < $PAGE_SIZE {
{out: $resp}
} else {
{out: $resp, next: ($page + 1)}
}
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- An `unfold` generator is added to the default context.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Given the complexity of the `generator` closure's return value, it would
be good to document the semantics of `unfold` and provide some in-depth
examples showcasing what it can accomplish.
# Description
Fixes: #7085
Also closes: #7526
# User-Facing Changes
After this change, we need to use `-c` flag like this:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham }
```
But we can rename many columns easily, here is another example:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham, b: ham2 }
```
# Description
Closes#10441
Uses `String::to_lowercase()` when the file's extension `ext` is parsed
to allow `from_decl(format!("from {ext}"))` to return the desired output
regardless of extension case.
It doesn't work with sqlite files since those are handled earlier in the
parsing but I think is good- since there's no standard file extension
used by sqlite so a user will likely want case sensitivity in that case.
This also has the (possibly undesired) effect of making `open`
completely case insensitive, e.g. `open foo.JSON` will work on a file
named `foo.json` and vice versa. This is good on Windows as it treats
`foo.json` and `foo.JSON` as the same file, but may not be the desired
behaviour on Unix.
If this behaviour is undesired I assume it would be fixed with a
`#[cfg(not(unix))]` attribute on the `to_lowercase()` operation but that
produces slightly "uglier" code that I didn't wish to submit unless
necessary.
old behaviour:
new behaviour:
# User-Facing Changes
`open` will now present a table when `open`-ing files with captitalized
extensions rather than the file's raw data
# Tests + Formatting
new test: `parses_file_with_uppercase_extension` which tests the desired
behaviour
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Fixes#10503
Also improves link to metacharacter help;
# Description
`glob` code was using pattern as provided by user. If that had leading
`..\`, `wax::Glob` is documented to treat them as literal chars to be
matched.
Fix is to use `wax::Glob.partition()` to split such invariant prefixes
off the pattern and tack them onto the working directory computed
separately.
Before
```
> ls ..
╭───┬───────┬──────┬──────┬───────────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼───────────────┤
│ 0 │ ../r1 │ dir │ 7 B │ 3 hours ago │
│ 1 │ ../r2 │ dir │ 3 B │ a day ago │
│ 2 │ ../r3 │ dir │ 13 B │ 4 minutes ago │
╰───┴───────┴──────┴──────┴───────────────╯
> glob ../r*
╭────────────╮
│ empty list │
╰────────────╯
```
After
```
> glob ../r*
╭───┬──────────────────────────────╮
│ 0 │ /home/bobhy/src/rust/work/r2 │
│ 1 │ /home/bobhy/src/rust/work/r1 │
│ 2 │ /home/bobhy/src/rust/work/r3 │
╰───┴──────────────────────────────╯
```
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
related to
- https://github.com/nushell/nushell/pull/9973
- https://github.com/nushell/nushell/pull/9918
thanks to @jntrnr and their super useful tips on this PR, i learned
about the parser + evaluation, so 🙏
# Description
because we already have `null` as the value of the type `nothing` and as
a followup to the two other attempts of mine, i propose to remove the
redundant `$nothing` built-in variable 😋
this PR is the first step, deprecating `$nothing`.
a followup PR will remove it altogether and wait for 0.87 👍⚙️ **details**: a new `NOTHING_VARIABLE_ID = 3` has been added,
parsing `$nothing` will create it, finally a `Value::Nothing` will be
produced and a warning will be reported.
this PR already fixes the `toolkit.nu` module so that it does not throw
a bunch of warnings each time 👌
# User-Facing Changes
`$nothing` is now deprecated and will be removed in 0.87
```nushell
> $nothing
Error: × Deprecated variable
╭─[entry #1:1:1]
1 │ $nothing
· ────┬───
· ╰── `$nothing` is deprecated and will be removed in 0.87.
╰────
help: Use `null` instead
```
# Tests + Formatting
tests have been updated, especially
- `nothing_fails_string`
- `nothing_fails_int`
which use a variable called `nil` now to make sure `nothing` does not
support cell paths 👍
# After Submitting
classic deprecation mention 👍
should close https://github.com/nushell/nushell/issues/10406
# Description
when writing a script, with variables you try to `ls` or `open`, you
will get a "directory not found" error but the variable won't be
expanded and you won't be able to see which one of the variable was the
issue...
this PR adds this information to the error.
# User-Facing Changes
let's define a variable
```nushell
let does_not_exist = "i_do_not_exist_in_the_current_directory"
```
### before
```nushell
> open $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #7:1:1]
1 │ open $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
```
```nushell
> ls $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #8:1:1]
1 │ ls $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
```
### after
```nushell
> open $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #3:1:1]
1 │ open $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
help: /home/amtoine/documents/repos/github.com/amtoine/nushell/i_do_not_exist_in_the_current_directory does not exist
```
```nushell
> ls $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #4:1:1]
1 │ ls $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
help: /home/amtoine/documents/repos/github.com/amtoine/nushell/i_do_not_exist_in_the_current_directory does not exist
```
# Tests + Formatting
shouldn't harm anything 🤞
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Closes#5436
When I opened this issue more than a year ago, I mainly wanted the
following capacity: easily access the full env and have the hability to
update it when a new version of `nushell` comes out.
With this PR I can now do the following:
```nu
source-env ~/.config/nushell/defaults/env.nu
source ~/.config/nushell/defaults/config.nu
# Update nushell default config & env file (run this after a version update)
def update-defaults [] {
config env --default | save -f ~/.config/nushell/defaults/env.nu
config nu --default | save -f ~/.config/nushell/defaults/config.nu
}
```
Which is more than enough for me. Along with `nushell` respecting the
XDG spec on macOS (`dirs-next` should be banned for CLI tools on macOS),
this should be one of the last hurdle before fully switching for me!
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Two new switches to existing commands:
```nu
config env --default # Print the default env embedded at compile time in the binary
config nu --default # Print the default config embedded at compile time in the binary
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- Added a test for the output of `config env --default`
- Added a test for the output of `config nu --default`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Are the docs for commands generated automatically or do I need to make a
PR there too ? It's no problem if so, just point me at instructions if
there are any :)
# Description
Fixes: #10450
This pr differentiating between `--x: bool` and `--x`
Here are examples which demostrate difference between them:
```nushell
def a [--x: bool] { $x };
a --x # not allowed, you need to parse a value to the flag.
a # it's allowed, and the value of `$x` is false, which behaves the same to `def a [--x] { $x }; a`
```
For boolean flag with default value, it works a little bit different to
#10450 mentioned:
```nushell
def foo [--option: bool = false] { $option }
foo # output false
foo --option # not allowed, you need to parse a value to the flag.
foo --option true # output true
```
# User-Facing Changes
After the pr, the following code is not allowed:
```nushell
def a [--x: bool] { $x }; a --x
```
Instead, you have to pass a value to flag `--x` like `a --x false`. But
bare flag works in the same way as before.
## Update: one more breaking change to help on #7260
```
def foo [--option: bool] { $option == null }
foo
```
After the pr, if we don't use a boolean flag, the value will be `null`
instead of `true`. Because here `--option: bool` is treated as a flag
rather than a switch
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
This PR should close#10085
Maps `DirectoryNotFound` errors to `FileNotFound`. All other errors are
left unchanged.
# User-Facing Changes
This means a user will see `FileNotFound` instead of `DirectoryNotFound`
which is more meaning full to the user.
# Description
This PR allows the `values` command to support lazy records.
closes https://github.com/nushell/nushell/issues/10417
### Before
```nushell
sys | values
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #1:1:1]
1 │ sys | values
· ─┬─ ───┬──
· │ ╰── only record or table input data is supported
· ╰── input type: record<host: record<name: string, os_version: string, long_os_version: string, kernel_version: string, hostname: string, uptime: duration, boot_time: string, sessions: list<any>>, cpu: table<name: string, brand: string, freq: int, cpu_usage: float, load_average: string, vendor_id: string>, disks: table<device: string, type: string, mount: string, total: filesize, free: filesize, removable: bool, kind: string>, mem: record<total: filesize, free: filesize, used: filesize, available: filesize, swap total: filesize, swap free: filesize, swap used: filesize>, temp: list<any>, net: table<name: string, sent: filesize, recv: filesize>>
╰────
```
### After
```nushell
❯ sys | values
╭─┬─────────────────╮
│0│{record 8 fields}│
│1│[table 16 rows] │
│2│[table 1 row] │
│3│{record 7 fields}│
│4│[list 0 items] │
│5│[table 5 rows] │
╰─┴─────────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #10410
So the following script is possible:
```nushell
def a [b: any = null] { let b = ($b | default "default_b"); }
a "given_b"
```
## About the change
When parsing signature, and nushell meets something like `a: any`, it
force the parser to treat `a` as `any` type. This is what
`arg_explicit_type` means, it's only set when we goes into
`ParseMode::TypeMode`, and it will be reset to `false` if the token goes
to next argument.
so, when we have something like this: `def a [b: any = null] { $b }`,
the type of `$b` won't be overwritten.
But if we have something like this: `def a [b = null] { $b }`, the type
of `$b` is not annotated, so we make it to be `nothing`(which is the
type of null)
# Description
This PR cleans up some warnings on the latest chrono dependency.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a bug in `let` where the pipeline wasn't being properly
redirected.
fixes#9767
# User-Facing Changes
Shouldn't have any breaking changes, as this should be better for
expected use cases.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
We made the decision that our floating point type should be referred to
as `float` over `decimal`.
Commands were updated by #9979 and #10320
Now make the internal codebase consistent in referring to this data type
as `float`.
Work for #10332
# User-Facing Changes
`decimal` has been removed as a type name/symbol.
Instead of
```nushell
def foo [bar: decimal] decimal -> decimal {}
```
use
```nushell
def foo [bar: float] float -> float {}
```
Potential effect of `SyntaxShape`'s `Display` implementation now also
referring to `float` instead of `decimal`
# Details
- Rename `SyntaxShape::Decimal` to `Float`
- Update `Display for SyntaxShape` to `float`
- Update error message + fn name in dataframe code
- Fix docs in command examples
- Rename tests that are float specific
- Update doccomment on `SyntaxShape`
- Update comment in script
# Tests + Formatting
Updates the names of some tests
# Description
this commit adds the handling of Value::List when BodyType is Json
it also adds the corresponding test (trying to send a list)
Fixes#10319
# User-Facing Changes
Added the ability to send a json list in the POST message
# Tests + Formatting
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [x] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
Also ran `nc -l -p 8080` in other terminal and `http post -fe -t
application/json http://localhost:8080 [{ field: true }]` I see the
following appear in the output of nc:
```
POST / HTTP/1.1
Host: localhost:8080
User-Agent: nushell
Accept: */*
Content-Type: application/json
accept-encoding: gzip
Content-Length: 16
[{"field":true}]%
```
```nu
$env.config.color_config.leading_trailing_space_bg = { bg: 'white' }; [[a b, 'c ']; [' 1 ' ' 2' '3 '] [' 4 ' "hello \n world " [' 1 ' 2 [1 ' 2 ' 3]]]] | table --expand
```
ref: #2794close: #10317
note: test are not actually make scenes cause `nu!` strips colors.
(Ideally it would need a flag to not do so)
note: It does does does ... slower down quite a bit rendering... (
PS: Maybe it's better being a flag to `table` rather then a
configuration option?
PS: I am not sure why the logic was removed in a first place
This PR is in reference to #10215.
This PR changes `select` to work even if multiple equal items were
provided.
This would previously error, but now works
```nushell
let arg = [ 1 a ]
[[a b c]; [1 2 3] [4 5 6] [7 8 9]]
| select $arg
```
# User-Facing Changes
Nothing too radical, just experience improvements. Users won't need to
pass the values through `unique` beforehand.
# Description
Currently we support "multiplication" of strings, resulting in a terse
way to repeat a particular string.
This can have unintended side effects when dealing with mixed data (e.g.
after parsing data that is not all numbers).
Furthermore as we frequently fall-back to strings while parsing source
code, this introduced a runaway edge case in const evaluation (#10212)
Work for #10233
## Details
- Remove python-like string multiplication.
- Workaround for indentation
- This should probably be addressed with a purpose built command
- Remove special const-eval error test
# User-Facing Changes
**Major breaking change!**
`"string" * 42` will stop working. (This was used for example in the
stdlib)
We should bless a good alternative before landing this
---------
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
# Description
The pythonism that multiplying a scalar integer with a list results in a
repeated concatenation of the list, is ambiguous with other possible
interpretations and thus actively harmful to clear semantics in nushell.
Another possible reading of this scalar/vector product would be trying
to perform elementwise multiplication with the scalar.
Before we bless this alternative as a more reasonable design the best
course of action is to remove this pythonism.
Work related to #10233
# User-Facing Changes
Breaking change as this turns `int * list` or `list * int` into hard
errors.
# Tests + Formatting
Remove the associated test
# Description
This changes `echo` to work more closely to what users of other shells
would expect:
* when redirected, `echo` works as before and sends values through the
pipeline
* when not redirected, `echo` will print values to the screen/terminal
# User-Facing Changes
A standalone `echo` now will print to the terminal, if not redirected.
The `echo` command is no longer const eval-able, as it will now print to
the terminal in some cases.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Similar to #9979
# User-Facing Changes
`random decimal` will now raise a warning and can be removed in an
upcoming release.
New command is named `random float`
# Tests + Formatting
Tests updated and improved.
# Description
We keep "into decimal" for a release and warn through a message that it
will be removed in 0.86.
All tests are updated to use `into float`
# User-Facing Changes
`into decimal` raises a deprecation warning, will be removed soon.
Use `into float` as the new functionally identical command instead.
```
~/nushell> 2 | into decimal
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ 2 | into decimal
· ──────┬─────
· ╰── `into decimal` is deprecated and will be removed in 0.86.
╰────
help: Use `into float` instead
2
```
# Tests + Formatting
Updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This generally makes for nicer APIs, as you are not forced to use an
existing allocation covering the full `String`.
Some exceptions remain where the underlying type requirements favor it.
# User-Facing Changes
None
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fixes#10300 , where using variables didnt work with `ucp` as it was
only expecting a `Expr::FilePath`.
Before: (from the issue)
```
❯ ucp -r $var $folder
Error: × Missing file operand
╭─[entry #40:1:1]
1 │ ucp -r $var $folder
· ─┬─
· ╰── Missing file operand
╰────
help: Please provide source and destination paths
```
Now:
```
`ucp -r $var $folder`
# success
```
Also added the test to ensure its working:) . Oh, and I tweaked again
slightly the messages on two tests because now the whole `path` is
printed rather than `a`. Say:
```
#before
`cp a a` --> 'a' and 'a' are the same file
# now
`cp a a` --> /home/current/location/a and /home/current/location/a are the same file
```
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
<!--
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes some ucp warnings.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR is in relation to #10215
# Description
This PR introduces `reject` to receive list of columns or rows as
argument.
This change is similar to change of `select` and the code used is
similar.
# User-Facing Changes
The user will be able to pass a list as rejection arguments.
```nushell
let arg = [ type size ]
[[name type size]; [ cargo.toml file 20mb ] [ Cargo.lock file 20mb] [src dir 100mb]] | reject $arg
```
# Description
This PR fixes `reject` failing when providing row items in ascending
order.
# User-Facing Changes
users can now `reject` multiple rows independently of each other.
```nushell
let foo = [[a b]; [ 1 2] [3 4] [ 5 6]]
# this will work independant of the order
print ($foo | reject 2 1)
print ($foo | reject 1 2)
```
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Hi. Basically, this is a continuation of the work that @fdncred started.
Given some nice discussions on #9463 , and [merged uutils
PR](https://github.com/uutils/coreutils/pull/5152) from @tertsdiepraam
we have decided to give the `cp` command the `crawl` stage as it was
named.
> [!NOTE]
Given that the `uutils` crate has not made the release for the merged
PR, just make sure you checkout latest and put it in the required place
to make this PR work.
The aim of this PR is for is to see how to move forward using `uutils`
crate. In order to getting this started, I have made the current
`nushell cp tests` pass along with some extra ones I copied over from
the `uutils` repo.
With all of that being said, things that would be nice to decide, and
keep working on:
Crawl:
- Handling of certain `named` flags, with their long and short
forms(e.g. --update, --reflink, --preserve, etc), and using default
values. Maybe `-u` can already have a `default_missing_value`.
- Should we maybe just support one single option `switch` flags (see
`--backup` in code) as a contrast to the other named args.
- Complete test coverage from `uutils`. They had > 100 tests, and I
could only port like 12 as they are a bit time consuming given they
cannot be straight up copy pasted. Maybe we do not need all >100, but
maybe the more relevant to what we want.
- Refactor this code
Walk:
- Non fatal errors on `copy` from `utils`. Currently it just sends it to
stdout but errors have no span
- Better integration
An added possibility is the addition of `SyntaxShape::OneOf()` for
`Named` arguments which was briefly mentioned in the discord server, but
that is still to be decided. This could greatly improve some of the
integration. This would enable something like `cp --preserve [all
timestamp]` or `cp --preserve all` to both work.
I did not want to keep holding on this, and wait till I was happy with
the code because I think its nice if everyone can start up and suggest
refactors, but the main important part now was getting it out the door,
as if I take my sweet time this will take way longer 😛
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Make sure you've run and fixed any issues with these commands:
- [X] cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- [X] cargo test --workspace` to check that all tests pass
- [X] cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
before this PR,
```nushell
> $.a.b | describe
cell path
```
which feels inconsistent with the `cell-path` type annotation, like in
```nushell
> def foo [x: cell-path] { $x | describe }; foo $.a.b
cell path
```
this PR changes the name of the "cell path" type from `cell path` to
`cell-path`
# User-Facing Changes
`cell path` is now `cell-path` in the output of `describe`.
this might be a breaking change in some scripts.
same goes with
- `list stream` -> `list-stream`
- `match pattern` -> `match-pattern`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
this PR adds a new `cell_path_type` test to make sure it stays equal to
`cell-path` in the future.
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
should close https://github.com/nushell/nushell/issues/10237
# Description
this is @fdncred's findings 😋
i just made the PR 😌
# User-Facing Changes
```nushell
[a b] | where $it == 'c' | last | default 'd'
```
now works and gives `d`
# Tests + Formatting
adds a new `default_after_empty_filter` test.
# After Submitting
Fix https://github.com/nushell/nushell/issues/10136
# Description
Current nushell only handle path containing '*' as match pattern and
treat '?' as just normal path.
This pr makes path containing '?' is also processed as pattern.
🔴 **Concerns: Need to design/comfirm a consistent rule to handle
dirs/files with '?' in their names.**
Currently:
- if no dir has exactly same name with pattern, it will print the list
of matched directories
- if pattern exactly matches an empty dir's name, it will just print the
empty dir's content ( i.e. `[]`)
- if pattern exactly matches an dir's name, it will perform pattern
match and print all the dir contains
e.g.
```bash
mkdir src
ls s?c
```
| name | type | size | modified |
| ---- | ---- | ------ | --------------------------------------------- |
| src | dir | 1.1 KB | Tue, 29 Aug 2023 07:39:41 +0900 (9 hours ago) |
-----------
```bash
mkdir src
mkdir scc
mkdir scs
ls s?c
```
| name | type | size | modified |
| ---- | ---- | ------ |
------------------------------------------------ |
| scc | dir | 64 B | Tue, 29 Aug 2023 16:55:31 +0900 (14 seconds ago) |
| src | dir | 1.1 KB | Tue, 29 Aug 2023 07:39:41 +0900 (9 hours ago) |
-----------
```bash
mkdir s?c
ls s?c
```
print empty (i.e. ls of dir `s?c`)
-----------
```bash
mkdir -p s?c/test
ls s?c
```
|name|type|size|modified|
|-|-|-|-|
|s?c/test|dir|64 B|Tue, 29 Aug 2023 16:47:53 +0900 (2 minutes ago)|
|src/bytes|dir|480 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
|src/charting|dir|160 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
|src/conversions|dir|160 B|Fri, 25 Aug 2023 17:43:52 +0900 (3 days ago)|
-----------
# User-Facing Changes
User will be able to use '?' to match directory/file.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
None
---------
Co-authored-by: Horasal <horsal@horsal.dev>
They relied on the `nu_plugin_inc` but where behind a feature flag that
isn't actually defined anywhere. These tests of `update` or `upsert`
shouldn't really depend on `inc` so I decided to remove them outright as
they haven't been used to exercise the commands under test.
As described in Issue #8670, removed `pipeline()` wherever its argument
contained no line breaks.
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
This doesn't really do much that the user could see, but it helps get us
ready to do the steps of the refactor to split the span off of Value, so
that values can be spanless. This allows us to have top-level values
that can hold both a Value and a Span, without requiring that all values
have them.
We expect to see significant memory reduction by removing so many
unnecessary spans from values. For example, a table of 100,000 rows and
5 columns would have a savings of ~8megs in just spans that are almost
always duplicated.
# User-Facing Changes
Nothing yet
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- fixed#9156
# Description
I'm trying to fix the problems mentioned in the issue. It's my first
attempt in Rust. Please let me know if there are any problems.
# User-Facing Changes
- The `--little-endian` option dropped, replaced with `--endian`.
- Add the `--compact` option to the `into binary` command.
- `into int` accepts binary input
# Description
This PR removes `record` processing from the `length` command. It just
doesn't make sense to try and get the length of a record. This PR also
removes the `--column` parameter. If you want to list or count columns,
you could use `$table | columns` or `$table | columns | length`.
close#10074
### Before
### After
Catches records two different ways now.
with the `input_output_types` checker
and with additional logic in the command for cases like `echo`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
