With the current code it is possible to attach custom commands from
a custom binary, but only for interactive mode. This change makes
it possible to also customize the evaluation context for commands
and scripts.
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* converted math commands to outputstream and new method for arg evaluation
* fmt
* clippy
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
If built without `trash_support`, nu should explicitly reject attempts to use `rm` with the `--trash` option, or with a config file which includes `rm_always_trash = true`.
As of 42fac72, there doesn't seem to be any guard in the `#[cfg(not(feature = "trash-support"))]` block of `filesystem_shell::rm`, leading to the behavior described in #3116, where builds without the trash-support feature will delete things permanently regardless of flags/config options.
This should close#3116
* Use ctx.configs in all config commands
* Remove all setting/accessing of vars.("config-path")
* Add tests
* Add comment
* Reload cfg on remove
* Hypocratic ws change
* Use history_path in hist_or_default
* Make clippy happy
* Fix rebase stuff
* Fix clippy lint
Before storing an entry into the history nushell will check if the entry
consists only of whitespaces and if so, it does not store it in the history and
this avoids newline repetition when user is navigating in the history.
* add support for timestamp-based time conversion by specifing timezone or 'UTC/Local'
* [fix] fix the wrong test sample
* code formating
* code formating and import missing mod to test
* code formating again
* [fix] it won't crash when given timestamp is too big.
* [fix] code formatting =_=b
* commands: any? all?
We can check if `any` (or `all`) rows of tables match predicates.
Small `all?` example: Given the following table with `services` running:
```
> echo [[status]; [UP] [UP]]
───┬────────
# │ status
───┼────────
0 │ UP
1 │ UP
───┴────────
```
We can ask if all services are UP, like so:
```
> echo [[status]; [UP] [UP]] | all? status == UP
true
```
* Fix any? signature.
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* always forgetting the linting
* fix clippy complaining
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Output error when ls into a file without permission
* added test to check fails when ls into prohibited dir
* fix lint
* trigger wasm build
* be able to remove fifos
* Update filesystem_shell.rs
* I thought windows had fifos
* fixed unix and windows conditional compilation
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Output error when ls into a file without permission
* added test to check fails when ls into prohibited dir
* fix lint
* trigger wasm build
* Update filesystem_shell.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Revert "History, more test coverage improvements, and refactorings. (#3217)"
This reverts commit 8fc8fc89aa.
* Add tests
* Refactor .nu-env
* Change logic of Config write to logic of read()
* Fix reload always appends to old vars
* Fix reload always takes last_modified of global config
* Add reload_config in evaluation context
* Reload config after writing to it in cfg set / cfg set_into
* Add --no-history to cli options
* Use --no-history in tests
* Add comment about maybe_print_errors
* Get ctrl_exit var from context.global_config
* Use context.global_config in command "config"
* Add Readme in engine how env vars are now handled
* Update docs from autoenv command
* Move history_path from engine to nu_data
* Move load history out of if
* No let before return
* Add import for indexmap
* enable ability to see all aliases, pull in code from scope branch
* add in the alias tests
* add back in my changes to variables.rs after merging in andrasios changes from PR #3217
Improvements overall to Nu. Also among the changes here, we can also be more confident towards incorporating `3041`. End to end tests for checking envs properly exported to externals is not added here (since it's in the other PR)
A few things added in this PR (probably forgetting some too)
* no writes happen to history during test runs.
* environment syncing end to end coverage added.
* clean up / refactorings few areas.
* testing API for finer control (can write tests passing more than one pipeline)
* can pass environment variables in tests that nu will inherit when running.
* No longer needed.
* no longer under a module. No need to use super.
* add ability to cd to ~/blah. tested on windows.
* added dirs_next
* put change behind feature for linux-minimal/wasm
* clippy
* holy crap minimal, i'm about done with you!
* add support for timestamp-based time conversion by specifing timezone or 'UTC/Local'
* [fix] fix the wrong test sample
* code formating
* code formating and import missing mod to test
* code formating again
the initial setup-commands of nushell were executed without loading environment variables
this resulted in the PATH not being available at this point until an external command was run once
which resulted in env_vars being added
let run_result = run_block(&prompt_block, &context, InputStream::empty()).await;
Co-authored-by: alexhk <alexhk@protonmail.com>
While the "main" separator in Windows is the backslash, it supports the
forward slash as a separator too.
Add support for this so that the behavior is similar to the way Windows
PowerShell handles the forward slash: it is recognized as a separator,
and when using <tab> for path completion the slash is reversed.
* Playground infraestructure (tests, etc) additions.
A few things to note:
* Nu can be started with a custom configuration file (`nu --config-file /path/to/sample_config.toml`). Useful for mocking the configuration on test runs.
* When given a custom configuration file Nu will save any changes to the file supplied appropiately.
* The `$nu.config-path` variable either shows the default configuration file (or the custom one, if given)
* We can now run end to end tests with finer grained control (currently, since this is baseline work, standard out) This will allow to check things like exit status, assert the contents with a format, etc)
* Remove (for another PR)
* Make opening a directory enter it.
Not sure if this change is wanted, but I'm not sure what else opening a directory could mean.
And I find myself accidentally using `open <dir>` to mean `enter <dir>`
* Add example to open directory
* Open dir should list it's contents
* Update example description and fix style
* update docs to refer to length instead of count
* rename count to length
* change all occurrences of 'count' to 'length' in tests
* format length command
* Move run_script to engine
* Add which dep and feature to engine
* Change unwrap to expect
* Add wasm specification
* Remove which from default, add specification correctly
* Add nu-platform-specifics
* Move is_external_cmd to platform_specifics
* Add is_external_cmd to host and use it instead of nu_platform directly
* Clean up if else logic in is_external_cmd
* Bump nu-platform-specifics version
* Pass context to print_err
* Commit cargo.lock
* Move print functions to own module inside nu-engine
* Hypocratic change to run windows-nightly again
* Add import for Ordering
* Move printing of error to host
* Move platform specific which functionality to basic host
* Allow no use of cmd_name
* Fix windows compile issue
For now the trash doesn't work because the trash-support flag isn't enabled in nu-engine
crate, so make it work by adding this flag.
Signed-off-by: Tw <wei.tan@intel.com>
Co-authored-by: Tw <wei.tan@intel.com>
* Split help message into brief and full help
Demonstrate on ansi command
Brief help is printed when running `help commands` so it doesn't clutter
the table. Full help is printed when normal help message is requested
(e.g., `help ansi`, `ansi --help`, etc.).
* Split long command descriptions
Some are not split, just edited to be shorter.
* Capitalize the usage of all commands
* Make sure every usage ends with dot
* Fix random typo
* use the InputHandler functionality from minus
* respond to Q and ESC character to quit
* use arijit79/minus main branch until new release is pushed
* rename NushellMinusInputHandler to MinusInputHandler
* Refactor path subcommand argument handling
DefaultArguments are no longer passed to each subcommand. Instead, each
subcommand has its own Path<xxx>Arguments. This means that it is no
longer necessary to edit every single path subcommand source file when
changing the arguments struct.
* Add new path join subcommand
Makes it easier to create new paths. It's just a wrapper around Rust's
Path.join().
* Add option to invert match command selection
* Fix rustfmt error
* Rename match --exclude to --invert
To be more descriptive and conform to e.g. grep or ripgrep -v flag.
Also simplified the --invert flag description.
* Fix formatting when description got shorter
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
* This adds table paging, relying on minus to perform the paging functionality
This is gated behind the table-pager feature
* fix problem with long running InputStreams blocking table() returning
* some comments regarding Arc clones, and callback from minus
* fix case where parent_name was {nu, term} and possibly others in the future by doing an extra test first to see if if the *parent_name key actually exists in cmap
* update with help generate_docs testing
