* Initialize join.rs as a copy of collect.rs
* Evolve StrCollect into StrJoin
* Replace 'str collect' with 'str join' everywhere
git ls-files | lines | par-each { |it| sed -i 's,str collect,str join,g' $it }
* Deprecate 'str collect'
* Revert "Deprecate 'str collect'"
This reverts commit 959d14203e.
* Change `str collect` help message to say that it is deprecated
We cannot remove `str collect` currently (i.e. via
`nu_protocol::ShellError::DeprecatedCommand` since a prominent project
uses the API:
b85542c31c/src/virtualenv/activation/nushell/activate.nu (L43)
Rename `all?`, `any?` and `empty?` to `all`, `any` and `is-empty` for sake of simplicity and consistency.
- More understandable for newcomers, that these commands are no special to others.
- `?` syntax did not really aprove readability. For me it made it worse.
- We can reserve `?` syntax for any other nushell feature.
* Add source-env test for dynamic path
* Use correct module ID for env overlay imports
* Remove parser check from "overlay list"
It would cause unnecessary errors from some inner scope if some
overlay module was also defined in some inner scope.
* Restore Cargo.lock back
* Remove comments
* start working on source-env
* WIP
* Get most tests working, still one to go
* Fix file-relative paths; Report parser error
* Fix merge conflicts; Restore source as deprecated
* Tests: Use source-env; Remove redundant tests
* Fmt
* Respect hidden env vars
* Fix file-relative eval for source-env
* Add file-relative eval to "overlay use"
* Use FILE_PWD only in source-env and "overlay use"
* Ignore new tests for now
This will be another issue
* Throw an error if setting FILE_PWD manually
* Fix source-related test failures
* Fix nu-check to respect FILE_PWD
* Fix corrupted spans in source-env shell errors
* Fix up some references to old source
* Remove deprecation message
* Re-introduce deleted tests
Co-authored-by: kubouch <kubouch@gmail.com>
* Add hide-env to hide env vars; Cleanup tests
Also, there were some old unalias tests that I converted to hide.
* Add missing file
* Re-enable hide for env vars
* Fix test
* Rename did you mean error back
It was causing random tests to break
* Add decimals to int when using `into string --decimals`
* Add tests for `into string` when converting int with `--decimals`
* Apply formatting
* Merge `into_str` test files
* Comment out unused code and add TODOs
* Use decimal separator depending on system locale
* Add test helper to run closure in different locale
* Add tests for int-to-string conversion using different locales
* Add utils function to get system locale
* Add panic message when locking mutex fails
* Catch and resume panic later to prevent Mutex poisoning when test fails
* Move test to `nu-test-support` to keep `nu-utils` free of `nu-*` dependencies
See https://github.com/nushell/nushell/pull/6085#issuecomment-1193131694
* Rename test support fn `with_fake_locale` to `with_locale_override`
* Move `get_system_locale()` to `locale` module
* Allow overriding locale with special env variable (when not in release)
* Use special env var to override locale during testing
* Allow callback to return a value in `with_locale_override()`
* Allow multiple options in `nu!` macro
* Allow to set locale as `nu!` macro option
* Use new `locale` option of `nu!` macro instead of `with_locale_override`
Using the `locale` options does not lock the `LOCALE_OVERRIDE_MUTEX`
mutex in `nu-test-support::locale_override` but instead calls the `nu`
command directly with the `NU_LOCALE_OVERRIDE` environment variable.
This allows for parallel test excecution.
* Fix: Add option identifier for `cwd` in usage of `nu!` macro
* Rely on `Display` trait for formatting `nu!` macro command
- Removed the `DisplayPath` trait
- Implement `Display` for `AbsolutePath`, `RelativePath` and
`AbsoluteFile`
* Default to locale `en_US.UTF-8` for tests when using `nu!` macro
* Add doc comment to `nu!` macro
* Format code using `cargo fmt --all`
* Pass function directly instead of wrapping the call in a closure
https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure
* Pass function to `or_else()` instead of calling it inside `or()`
https://rust-lang.github.io/rust-clippy/master/index.html#or_fun_call
* Fix: Add option identifier for `cwd` in usage of `nu!` macro
* Allow private imports inside modules
Can call `use ...` inside modules now.
* Add more tests
* Add a leak test
* Refactor exportables; Prepare for 'export use'
* Fix description
* Implement 'export use' command
This allows re-exporting module's commands and aliases from another
module.
* Add more tests; Fix import pattern list strings
The import pattern strings didn't trim the surrounding quotes.
* Add ignored test
* Skeleton implementation
Lots and lots of TODOs
* Bootstrap simple CustomValue plugin support test
* Create nu_plugin_custom_value
* Skeleton for nu_plugin_custom_values
* Return a custom value from plugin
* Encode CustomValues from plugin calls as PluginResponse::PluginData
* Add new PluginCall variant CollapseCustomValue
* Handle CollapseCustomValue plugin calls
* Add CallInput::Data variant to CallInfo inputs
* Handle CallInfo with CallInput::Data plugin calls
* Send CallInput::Data if Value is PluginCustomValue from plugin calls
* Remove unnecessary boxing of plugins CallInfo
* Add fields needed to collapse PluginCustomValue to it
* Document PluginCustomValue and its purpose
* Impl collapsing using plugin calls in PluginCustomValue::to_base_value
* Implement proper typetag based deserialization for CoolCustomValue
* Test demonstrating that passing back a custom value to plugin works
* Added a failing test for describing plugin CustomValues
* Support describe for PluginCustomValues
- Add name to PluginResponse::PluginData
- Also turn it into a struct for clarity
- Add name to PluginCustomValue
- Return name field from PluginCustomValue
* Demonstrate that plugins can create and handle multiple CustomValues
* Add bincode to nu-plugin dependencies
This is for demonstration purposes, any schemaless binary seralization
format will work. I picked bincode since it's the most popular for Rust
but there are defintely better options out there for this usecase
* serde_json::Value -> Vec<u8>
* Update capnp schema for new CallInfo.input field
* Move call_input capnp serialization and deserialization into new file
* Deserialize Value's span from Value itself instead of passing call.head
I am not sure if this was correct and I am breaking it or if it was a
bug, I don't fully understand how nu creates and uses Spans. What should
reuse spans and what should recreate new ones?
But yeah it felt weird that the Value's Span was being ignored since in
the json serializer just uses the Value's Span
* Add call_info value round trip test
* Add capnp CallInput::Data serialization and deserialization support
* Add CallInfo::CollapseCustomValue to capnp schema
* Add capnp PluginCall::CollapseCustomValue serialization and deserialization support
* Add PluginResponse::PluginData to capnp schema
* Add capnp PluginResponse::PluginData serialization and deserialization support
* Switch plugins::custom_values tests to capnp
Both json and capnp would work now! Sadly I can't choose both at the
same time :(
* Add missing JsonSerializer round trip tests
* Handle plugin returning PluginData as a response to CollapseCustomValue
* Refactor plugin calling into a reusable function
Many less levels of indentation now!
* Export PluginData from nu_plugin
So plugins can create their very own serve_plugin with whatever
CustomValue behavior they may desire
* Error if CustomValue cannot be handled by Plugin
* Updated nu_with_plugins to handle new nushell
- Now it requires the plugin format and name to be passed in, because
we can't really guess the format
- It calls `register` with format and plugin path
- It creates a temporary folder and in it an empty temporary plugin.nu
so that the tests don't conflict with each other or with local copy of
plugin.nu
- Instead of passing the commands via stdin it passes them via the new
--commands command line argument
* Rename path to command for clarity
* Enable core_inc tests
Remove deprecated inc feature and replace with new plugin feature
* Update core_inc tests for new nu_with_plugins syntax
* Rework core_inc::can_only_apply_one
The new inc plugin doesn't error if passed more than one but instead
chooses the highest increment
* Gate all plugin tests behind feature = "plugin" instead of one by one
* Remove format!-like behavior from nu_with_plugins
nu_with_plugins had format!-like behavior where it would allow calls
such as this:
```rs
nu_with_plugins!(
cwd: "dir/",
"open {} | get {}",
"Cargo.toml",
"package.version"
)
```
And although nifty it seems to have never been used before and the same
can be achieved with a format! like so:
```rs
nu_with_plugins!(
cwd: "dir/",
format!("open {} | get {}", "Cargo.toml", "package.version")
)
```
So I am removing it to keep the complexity of the macro in check
* Add multi-plugin support to nu_with_plugins
Useful for testing interactions between plugins
* Alternative 1: run `cargo build` inside of tests
* Handle Windows by canonicalizing paths and add .exe
One VM install later and lots of learning about how command line
arguments work and here we are
* introduce external command runs to failed error, and implement semicolon relative logic
* ignore test due to semicolon works
* not raise ShellError for external commands
* update comment
* add relative test in for windows
* fix type-o
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Remove comment
* Split delta and environment merging
* Move table mode to a more logical place
* Cleanup
* Merge environment after reading default_env.nu
* Fmt
* Allow keeping selected env from removed overlay
* Remove some duplicate code
* Change --keep-all back to --keep-custom
Because, apparently, you cannot have a named flag called --keep-all,
otherwise tests fail?
* Fix missing line and wrong test value
* (WIP) Initial messy support for hooks as strings
* Cleanup after running condition & hook code
Also, remove prints
* Move env hooks eval into its own function
* Add env change hooks to simulator
* Fix hooks simulator not running env hooks properly
* Add missing hooks test file
* Expand hooks tests
* Add blocks as env hooks; Preserve hook environment
* Add full eval to pre prompt/exec hooks; Fix panic
* Rename env change hook back to orig. name
* Print err on test failure; Add list of hooks test
* Consolidate condition block; Fix panic; Misc
* CHange test to use real file
* Remove unused stuff
* Fix potential panics; Clean up errors
* Remove commented unused code
* Clippy: Fix extra references
* Add back support for old-style hooks
* Reorder functions; Fmt
* Fix test on Windows
* Add more test cases; Simplify some error reporting
* Add more tests for setting correct before/after
* Move pre_prompt hook to the beginning
Since we don't have a prompt or blocking on user input, all hooks just
follow after each other.
* fix argument type
* while run external, convert list argument to str
* fix argument converting logic
* using parse_list_expression instead of parse_full_cell_path
* make parsing logic more explicit
* revert changes
* add tests
* Allow env vars to be kept from removed overlay
* Rename --keep to --keep-custom; Add new test
* Rename some symbols
* (WIP) Start working on --keep for defs and aliases
* Fix decls/aliases not melting properly
* Use id instead of the whole cloned overlay
* Rewrite overlay remove for no reason
Doesn't fix the bug but at least looks better.
* Rename variable
* Fix adding overlay env vars
* Add more tests; Fmt + Clippy
* Add Nushell REPL simulator; Fix bug in overlay add
The `nu_repl` function takes an array of strings and processes them as
if they were REPL lines entered one by one. This helps to discover bugs
due to the state changes between the parse and eval stages.
* Fix REPL tests on Windows
* WIP: Start laying overlays
* Rename Overlay->Module; Start adding overlay
* Revamp adding overlay
* Add overlay add tests; Disable debug print
* Fix overlay add; Add overlay remove
* Add overlay remove tests
* Add missing overlay remove file
* Add overlay list command
* (WIP?) Enable overlays for env vars
* Move OverlayFrames to ScopeFrames
* (WIP) Move everything to overlays only
ScopeFrame contains nothing but overlays now
* Fix predecls
* Fix wrong overlay id translation and aliases
* Fix broken env lookup logic
* Remove TODOs
* Add overlay add + remove for environment
* Add a few overlay tests; Fix overlay add name
* Some cleanup; Fix overlay add/remove names
* Clippy
* Fmt
* Remove walls of comments
* List overlays from stack; Add debugging flag
Currently, the engine state ordering is somehow broken.
* Fix (?) overlay list test
* Fix tests on Windows
* Fix activated overlay ordering
* Check for active overlays equality in overlay list
This removes the -p flag: Either both parser and engine will have the
same overlays, or the command will fail.
* Add merging on overlay remove
* Change help message and comment
* Add some remove-merge/discard tests
* (WIP) Track removed overlays properly
* Clippy; Fmt
* Fix getting last overlay; Fix predecls in overlays
* Remove merging; Fix re-add overwriting stuff
Also some error message tweaks.
* Fix overlay error in the engine
* Update variable_completions.rs
* Adds flags and optional arguments to view-source (#5446)
* added flags and optional arguments to view-source
* removed redundant code
* removed redundant code
* fmt
* fix bug in shell_integration (#5450)
* fix bug in shell_integration
* add some comments
* enable cd to work with directory abbreviations (#5452)
* enable cd to work with abbreviations
* add abbreviation example
* fix tests
* make it configurable
* make cd recornize symblic link (#5454)
* implement seq char command to generate single character sequence (#5453)
* add tmp code
* add seq char command
* Add split number flag in `split row` (#5434)
Signed-off-by: Yuheng Su <gipsyh.icu@gmail.com>
* Add two more overlay tests
* Add ModuleId to OverlayFrame
* Fix env conversion accidentally activating overlay
It activated overlay from permanent state prematurely which would
cause `overlay add` to misbehave.
* Remove unused parameter; Add overlay list test
* Remove added traces
* Add overlay commands examples
* Modify TODO
* Fix $nu.scope iteration
* Disallow removing default overlay
* Refactor some parser errors
* Remove last overlay if no argument
* Diversify overlay examples
* Make it possible to update overlay's module
In case the origin module updates, the overlay add loads the new module,
makes it overlay's origin and applies the changes. Before, it was
impossible to update the overlay if the module changed.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Co-authored-by: pwygab <88221256+merelymyself@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
Co-authored-by: Yuheng Su <gipsyh.icu@gmail.com>
* nu-cli/completions: fix paths with special chars
* add backticks
* fix replace
* added single quotes to check list
* check escape using fold
* fix clippy errors
* fix comment line
* fix conflicts
* change to vec
* skip sort checking
* removed invalid windows path
* remove comment
* added tests for escape function
* fix fn import
* fix fn import error
* test windows issue fix
* fix windows backslash path in the tests
* show expected path on error
* skip test for windows
* nu-cli: added tests for file completions
* test adding extra sort
* Feature/refactor completion options (#5228)
* Copy completion filter to custom completions
* Remove filter function from completer
This function was a no-op for FileCompletion and CommandCompletion.
Flag- and VariableCompletion just filters with `starts_with` which
happens in both completers anyway and should therefore also be a no-op.
The remaining use case in CustomCompletion was moved into the
CustomCompletion source file.
Filtering should probably happen immediately while fetching completions
to avoid unnecessary memory allocations.
* Add get_sort_by() to Completer trait
* Remove CompletionOptions from Completer::fetch()
* Fix clippy lints
* Apply Completer changes to DotNuCompletion
* add os to $nu based on rust's understanding (#5243)
* add os to $nu based on rust's understanding
* add a few more constants
Co-authored-by: Richard <Tropid@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Fix failing unit tests on Windows (#5142)
Fix let_env_expressions failing on Windows:
The env expression uses PATH, but on windows Path is used.
Fix correctly_escape_external_arguments, execute_binary_in_string
failing on Windows:
Using cococo now to make sure testresults are platform independent
* Update macros.rs
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Remove panic from BlockCommands run function
Instead of panicing, the run method now returns an error to prevent
nushell from unexpected termination.
* Add ability to open command to run with blocks
The open command tries to parse the content of the file
if there is a command called 'from (file ending)'. This works
fine if the command was 'built in' because the run method doesn't
fail in this case. It did fail on a BlockCommand, though.
This change will first probe if the command contains a block and
evaluate it, if this is the case. If there is no block, it will run
the command the same way as before.
* Add test open files with BlockCommands
* Update open.rs
* Adjust file type on open with BlockCommand parser
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Add test for passing binary data through externals
This change adds an ignored test to confirm that binary data is passed
correctly between externals to be enabled in a later commit along with
the fix.
To assist in platform agnostic testing of binary data a couple of
additional testbins were added to allow testing on `Value::Binary` inside
`ExternalStream`.
* Support binary data to stdin of run-external
Prior to this change, any pipeline producing binary data (not detected
as string) then feed into an external would be ignored due to
run-external only supporting `Value::String` on stdin.
This change adds binary stdin support for externals allowing something
like this for example:
〉^cat /dev/urandom | ^head -c 1MiB | ^pv -b | ignore
1.00MiB
This would previously output `0.00 B [0.00 B/s]` due to the data not
being pushed to stdin at each stage.
