# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
After the 0.72.1 hotfix, let's bump our dev builds to 0.72.2.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
# Description
Just bumping to the next dev version. Submitting as a draft until we're
ready.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
chrono version update
# Description
upgrade chrono to 0.4.23
# Major Changes
If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!
# Tests + Formatting
Make sure you've done the following, if applicable:
- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This adds `break`, `continue`, `return`, and `loop`.
* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)
Examples:
```
for i in 1..10 {
if $i == 5 {
continue
}
print $i
}
```
```
for i in 1..10 {
if $i == 5 {
break
}
print $i
}
```
```
def foo [x] {
if true {
return 2
}
$x
}
foo 100
```
```
loop { print "hello, forever" }
```
```
[1, 2, 3, 4, 5] | each {|x|
if $x > 3 { break }
$x
}
```
# User-Facing Changes
Adds the above commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is a set of fixes to `err>` to make it work a bit more predictably.
I've also revised the tests, which accidentally tested the wrong thing
for redirection, but should be more correct now.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This adds new pipeline connectors called out> and err> which redirect either stdout or stderr to a file. You can also use out+err> (or err+out>) to redirect both streams into a file.
* add signature information when help on one command
* tell user that one command support operated on cell paths
Also, make type output to be more friendly, like `record<>` should just be `record`
And the same to `table<>`, which should be `table`
* simplify code
* don't show signatures for parser keyword
* update comment
* output arg syntax shape as type, so it's the same as describe command
* fix string when no positional args
* update signature body
* update
* add help signature test
* fix arg output format for composed data type like list or record
* fix clippy
* add comment
* removes unused features.
* Adds back multithreading feature to sysinfo.
* Adds back alloc for percent-encoding
* Adds updated lock file.
* Missed one sysinfo.
* `indexmap` just defaults
* Revert `miette``default-features=false`
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.
Mutable variables allow mutation via the assignment operator (=).
❯ mut x = 100
❯ $x = 200
❯ print $x
200
Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:
❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)
× Capture of mutable variable.
The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.
Mutation can occur with fields as well, as in this case:
❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y
On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
* New "display_output" hook.
* Fix unrelated "clippy" complaint in nu-tables crate.
* Fix code-formattng and style issues in "display_output" hook
* Enhance eval_hook to return PipelineData.
This allows a hook (including display_output) to return a value.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Allows use of slightly optimized variants that check if they have to use
the heavier vte parser. Tries to avoid unnnecessary allocations. Initial
performance characteristics proven out in #4378.
Also reduces boilerplate with right-ward drift.
Disable backtrace on miette
- gimli crate requires several seconds
Disable diagnostics on wax
- depends on an outdated miette version
Builds fine, no observable loss in diagnostics quality of life
Removes 10 crates that have to be compiled.
* Add support to render right prompt on last line of the prompt
* reset reedline to main branch
* update reedline to fix right prompt to be rendered correctly
* reset reedline to main branch again
* Make Tab insert (partial) completion instead of select next menu item
* Use reedline feature branch
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Reorder conditional deps for readability
* Pull reedline from the most recent main branch
* Map 'Submit' and 'SubmitOrNewline' events
Introduced by nushell/reedline#490
* Add "space" key to bind in vi normal mode
Implements #6586
No special logic to prevent you from binding it in other modes!
Needs a separate change to reedline to make it available in the default
listing of `keybindings list`.
* Update reedline to report the available `space`
Pulls in nushell/reedline#486
This is a de-facto standard supported by many terminals, originally
added to macOS Terminal.app, now also supported by VTE (GNOME),
Konsole (KDE), WezTerm, and more.
* Add a 'commandline' command for manipulating the current buffer
from `executehostcommand` keybindings. Inspired by fish:
https://fishshell.com/docs/current/cmds/commandline.html
* Update to development reedline
Includes nushell/reedline#472
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* Terminate REPL if not connected to tty input
If the standard input stream is not a TTY abort the REPL execution.
Solves a problem as the current REPL tries to be IO fault tolerant and
would indefinetely fail when crossterm tries to handle the STDIN.
Fixesnushell/nushell#6452
* Improve the error message
* Avoid update_last_command_context "No command run" error
When using `executehostcommand` bindings without having run actual user input commands yet,
update_last_command_context is guaranteed to fail. A function has been added to reedline
that allows checking for this case.
* Update to most recent reedline
Includes bugfixes around the (SQlite) history
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* start working on source-env
* WIP
* Get most tests working, still one to go
* Fix file-relative paths; Report parser error
* Fix merge conflicts; Restore source as deprecated
* Tests: Use source-env; Remove redundant tests
* Fmt
* Respect hidden env vars
* Fix file-relative eval for source-env
* Add file-relative eval to "overlay use"
* Use FILE_PWD only in source-env and "overlay use"
* Ignore new tests for now
This will be another issue
* Throw an error if setting FILE_PWD manually
* Fix source-related test failures
* Fix nu-check to respect FILE_PWD
* Fix corrupted spans in source-env shell errors
* Fix up some references to old source
* Remove deprecation message
* Re-introduce deleted tests
Co-authored-by: kubouch <kubouch@gmail.com>
This PR merges all the completions tests into one file.
The reason for them to be separated was organization, so we wouldn't need to scroll a huge file.
But that came with another issue, because rust generates a new binary for each completion test file and each completion test depends on Nu looks like all the dataframes were coming into each test file as well (as pointed by @rgwood
* Update after Reedline API update
* Remove references to deleted `ReedlineEvent::ActionHandler`
* Update `DescriptionMenu` implementation for the new `Menu` trait
API changes that work on `Editor` rather than `LineBuffer` objects
* Update reedline
Includes nushell/reedline#460
Co-authored-by: Ben Parks <bnprks+git@gmail.com>
`rstest = 0.12` added support for asynchronous timeouts during testing
thus requiring a larger set of dependencies. Since `rstest = 0.14` this
can be disabled if not used.
Should keep build times for local or CI tests in check.
* add a new welcome banner to nushell
* remove top line
* tweaked colors and wording
* changed to dimmed white
* removed a comment
* make config nu stand out a little
* fix type-o
* Add plugin CLI argument
While working on supporting CustomValues in Plugins I stumbled upon the
test utilities defined in [nu-test-support][nu-test-support]
and thought these will come in handy, but they end up being outdated.
They haven't been used or since engine-q's was merged, so they are
currently using the old way engine-q handled plugins, where it would
just look into a specific folder for plugins and call them without
signatures or registration. While fixing that I realized that there is
currently no way to tell nushell to load and save signatures into a
specific path, and so those integration tests could end up potentially
conflicting with each other and with the local plugins the person
running them is using.
So this adds a new CLI argument to specify where to store and load
plugin signatures from
I am not super sure of the way I implemented this, mainly
I was a bit confused about the distinction between
[src/config_files.rs][src/config_files.rs] and
[crates/nu-cli/src/config_files.rs][crates/nu-cli/src/config_files.rs].
Should I be moving the plugin loading function from the `nu-cli` one to
the root one?
[nu-test-support]: 9d0be7d96f/crates/nu-test-support/src/macros.rs (L106)
[src/config_files.rs]: 9d0be7d96f/src/config_files.rs
[crates/nu-cli/src/config_files.rs]: 9d0be7d96f/crates/nu-cli/src/config_files.rs
* Gate new CLI option behind plugin feature
* Rename option to plugin-config
* Remove comment
* Split delta and environment merging
* Move table mode to a more logical place
* Cleanup
* Merge environment after reading default_env.nu
* Fmt
* (WIP) Initial messy support for hooks as strings
* Cleanup after running condition & hook code
Also, remove prints
* Move env hooks eval into its own function
* Add env change hooks to simulator
* Fix hooks simulator not running env hooks properly
* Add missing hooks test file
* Expand hooks tests
* Add blocks as env hooks; Preserve hook environment
* Add full eval to pre prompt/exec hooks; Fix panic
* Rename env change hook back to orig. name
* Print err on test failure; Add list of hooks test
* Consolidate condition block; Fix panic; Misc
* CHange test to use real file
* Remove unused stuff
* Fix potential panics; Clean up errors
* Remove commented unused code
* Clippy: Fix extra references
* Add back support for old-style hooks
* Reorder functions; Fmt
* Fix test on Windows
* Add more test cases; Simplify some error reporting
* Add more tests for setting correct before/after
* Move pre_prompt hook to the beginning
Since we don't have a prompt or blocking on user input, all hooks just
follow after each other.
* Avoid extending the directory without globs in `nu_engine::glob_from`
* avoid joining a `*` to the directory without globs
* remove checks on directory permission and whether it is empty
The previous implemention of `nu_engine::glob_from` will extend the
given directory even if it containes no glob pattern. This commit
overcomes lack of consistency with the function `nu_glob::glob`.
* Add flag -D to ls, to list the directory itself instead of its contents
* add --directory (-d) flag to ls
* correct the difference between the given path and the cwd
* set default path to `.` instead of `./*` when --directory (-d) flag is true
* add comments
* add an example
* add tests
* fmt
* fixes the issue for 'open' and other commands that explicitly use `SyntaxShape::Filepath`
* fixes for `rm` and similar commands
* fixes for `ls`: potentially breaking?
* fmt
* a curious fix to the test
* a curious fix to the test, except for Windows this time
* fixes Windows tests failing
* resolves it by putting an explicit check for `ls`
* reverts unnecessary test changes; fmt
* changes the order of completion operations
This PR adds support for an SQLite history via nushell/reedline#401
The SQLite history is enabled by setting history_file_format: "sqlite" in config.nu.
* somewhat working sqlite history
* Hook up history command
* Fix error in SQlitebacked with empty lines
When entering an empty line there previously was the "No command run"
error with `SqliteBackedHistory` during addition of the metadata
May be considered a temporary fix
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* 06-07-wsl
* 06-07-linux-issue-with-delete-input
* 06-08-2023
* 06-08-Linux
* commit for merge
* Fix unit test
* format
* clean code
* Add flag to turn off external completion
* change env var to config
* Fix comment
Co-authored-by: Frank Zhang <v-frankz@microsoft.com>
* input and output tests
* input and output types for dfr
* expression converter
* remove deprecated command
* correct expressions
* cargo clippy
* identifier for ls
* cargo clippy
* type for head and tail expression
* modify full cell path if block
* 06-07-wsl
* 06-07-linux-issue-with-delete-input
* 06-08-2023
* 06-08-Linux
* commit for merge
* Fix unit test
* format
* clean code
Co-authored-by: Frank Zhang <v-frankz@microsoft.com>
Added CMD_FINISHED_MARKER to be emitted when command finishes.
Also switched the names PRE_EXECUTE_MARKER and PRE_PROMPT_MARKER
as the old names were confusing/wrong.
Release notes: https://github.com/nushell/reedline/releases/tag/v0.6.0
This release contains several bug fixes and improvements to the vi-emulation and documentation.
- Improvements to the vi-style keybindings (@sadmac7000):
- `w` now correctly moves to the beginning of the word.
- `e` to move to the end of the word.
- Bugfixes:
- Support terminal emulators that erroneously report a size of 0x0 by assuming a default size to avoid panics and draw nevertheless (@DhruvDh)
- Fix `ListMenu` layout calculations. Avoids scrolling bug when wrapping occurs due to the line numbering (@ahkrr)
- Avoid allocating to the total history capacity which can cause the application to go out of memory (@sholderbach)
- Documentation improvements including addition of documentation intended for reedline developers (@petrisch, @sholderbach)
Fixes#5593 (OOM introduced with #5587 when no config was present and an attempt was
made to allocate all memory in advance)
Includes also other changes to reedline:
- Vi word definition fixed and `w` and `e` work as expected
* only set cwd for child process if cwd exists, and avoid showing error when pwd is not exists
* better comment text
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Currently the fully fledged help menu is bound to `Ctrl-Q`.
Help is widely associated with `F1`.
Before merging check that it is passed through on all platforms and
terminal emulators
* Change history menu keybinding to ctrl+r from ctrl+x
* Remove menupage actions from default config
* remove trailing whitespace
* re-add next+previous page keybindings
* Remove hardcoded menu keybindings
* Hardcode new keybindings
* Made a change to completion resolution order
* Potential fix for completion (remove file paths from command completer)
* Updating formatting
* Removed commented out code for readability
* Fixed compile error on merge
* Add Nushell REPL simulator; Fix bug in overlay add
The `nu_repl` function takes an array of strings and processes them as
if they were REPL lines entered one by one. This helps to discover bugs
due to the state changes between the parse and eval stages.
* Fix REPL tests on Windows
* WIP: Start laying overlays
* Rename Overlay->Module; Start adding overlay
* Revamp adding overlay
* Add overlay add tests; Disable debug print
* Fix overlay add; Add overlay remove
* Add overlay remove tests
* Add missing overlay remove file
* Add overlay list command
* (WIP?) Enable overlays for env vars
* Move OverlayFrames to ScopeFrames
* (WIP) Move everything to overlays only
ScopeFrame contains nothing but overlays now
* Fix predecls
* Fix wrong overlay id translation and aliases
* Fix broken env lookup logic
* Remove TODOs
* Add overlay add + remove for environment
* Add a few overlay tests; Fix overlay add name
* Some cleanup; Fix overlay add/remove names
* Clippy
* Fmt
* Remove walls of comments
* List overlays from stack; Add debugging flag
Currently, the engine state ordering is somehow broken.
* Fix (?) overlay list test
* Fix tests on Windows
* Fix activated overlay ordering
* Check for active overlays equality in overlay list
This removes the -p flag: Either both parser and engine will have the
same overlays, or the command will fail.
* Add merging on overlay remove
* Change help message and comment
* Add some remove-merge/discard tests
* (WIP) Track removed overlays properly
* Clippy; Fmt
* Fix getting last overlay; Fix predecls in overlays
* Remove merging; Fix re-add overwriting stuff
Also some error message tweaks.
* Fix overlay error in the engine
* Update variable_completions.rs
* Adds flags and optional arguments to view-source (#5446)
* added flags and optional arguments to view-source
* removed redundant code
* removed redundant code
* fmt
* fix bug in shell_integration (#5450)
* fix bug in shell_integration
* add some comments
* enable cd to work with directory abbreviations (#5452)
* enable cd to work with abbreviations
* add abbreviation example
* fix tests
* make it configurable
* make cd recornize symblic link (#5454)
* implement seq char command to generate single character sequence (#5453)
* add tmp code
* add seq char command
* Add split number flag in `split row` (#5434)
Signed-off-by: Yuheng Su <gipsyh.icu@gmail.com>
* Add two more overlay tests
* Add ModuleId to OverlayFrame
* Fix env conversion accidentally activating overlay
It activated overlay from permanent state prematurely which would
cause `overlay add` to misbehave.
* Remove unused parameter; Add overlay list test
* Remove added traces
* Add overlay commands examples
* Modify TODO
* Fix $nu.scope iteration
* Disallow removing default overlay
* Refactor some parser errors
* Remove last overlay if no argument
* Diversify overlay examples
* Make it possible to update overlay's module
In case the origin module updates, the overlay add loads the new module,
makes it overlay's origin and applies the changes. Before, it was
impossible to update the overlay if the module changed.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Co-authored-by: pwygab <88221256+merelymyself@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
Co-authored-by: Yuheng Su <gipsyh.icu@gmail.com>
To avoid resuggesting the same completion, add a space after commands or flags that have been accepted via `Enter`. Don't do that for filepaths or external completions
* Add append_whitespace choice for suggestion
Signed-off-by: gipsyh <gipsyh.icu@gmail.com>
* Fixed `test <path>` appending space.
* Update reedline
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* nu-cli/completions: fix paths with special chars
* add backticks
* fix replace
* added single quotes to check list
* check escape using fold
* fix clippy errors
* fix comment line
* fix conflicts
* change to vec
* skip sort checking
* removed invalid windows path
* remove comment
* added tests for escape function
* fix fn import
* fix fn import error
* test windows issue fix
* fix windows backslash path in the tests
* show expected path on error
* skip test for windows
* Pass completion options to each fetch() call
* Add MatchAlgorithm to CompletionOptions
* Add unit test for MatchAlgorithm
* Pass completion options to directory completer
Changes to reedline since `v0.4.0`:
- vi normal mode `I` for inserting at line beginning
- `InsertNewline` edit command that can be bound to `Alt-Enter` if
desired to have line breaks without relying on the `Validator`
- `ClearScreen` will directly clear the visible screen. `Signal::CtrlL` has been
removed.
- `ClearScrollback` will clear the screen and scrollback. Can be used to
mimic macOS `Cmd-K` screen clearing. Helps with #5089
* nu-cli: added tests for file completions
* test adding extra sort
* Feature/refactor completion options (#5228)
* Copy completion filter to custom completions
* Remove filter function from completer
This function was a no-op for FileCompletion and CommandCompletion.
Flag- and VariableCompletion just filters with `starts_with` which
happens in both completers anyway and should therefore also be a no-op.
The remaining use case in CustomCompletion was moved into the
CustomCompletion source file.
Filtering should probably happen immediately while fetching completions
to avoid unnecessary memory allocations.
* Add get_sort_by() to Completer trait
* Remove CompletionOptions from Completer::fetch()
* Fix clippy lints
* Apply Completer changes to DotNuCompletion
* add os to $nu based on rust's understanding (#5243)
* add os to $nu based on rust's understanding
* add a few more constants
Co-authored-by: Richard <Tropid@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Copy completion filter to custom completions
* Remove filter function from completer
This function was a no-op for FileCompletion and CommandCompletion.
Flag- and VariableCompletion just filters with `starts_with` which
happens in both completers anyway and should therefore also be a no-op.
The remaining use case in CustomCompletion was moved into the
CustomCompletion source file.
Filtering should probably happen immediately while fetching completions
to avoid unnecessary memory allocations.
* Add get_sort_by() to Completer trait
* Remove CompletionOptions from Completer::fetch()
* Fix clippy lints
* Apply Completer changes to DotNuCompletion
This commit renders ANSI chars in order to provide shell integrations
such Kitty's opening feature that captures the output of the last
command in a pager such as less.
Fixes#5138
- With a change to reedline hints can now be hidden. This is useful when
no ANSI coloring is available as hints become indistinguishable from the
actual buffer
- remove commented out code
- order the logging calls according to the implementation
To remove a default keybinding for a particular edit mode, set the `event: null`:
e.g. to disable screen clearing with Ctrl-L
```
let $config = {keybindings: [{
modifier: control
keycode: char_l
mode: [emacs, vi_normal, vi_insert]
event: null
} ]}
```
* Remove unused packages from base Cargo.toml
* Remove unused crossterm_winapi from nu-cli
* Remove unused dependencies from nu-system
* Remove unused dependencies from nu-test-support
* Initial implementation of ordered call args
* Run cargo fmt
* Fix some clippy lints
* Add positional len and nth
* Cargo fmt
* Remove more old nth calls
* Good ole rustfmt
* Add named len
Co-authored-by: Hristo Filaretov <h.filaretov@protonmail.com>
* Include license text in all crates
Three crates already have license texts, so I'm keeping them, but
symlinking the `LICENSE` from the top level to the rest of the crate
directories. This works as long as `cargo publish` is done on a Unix-y
system and not Windows.
Also bump the copyright year to end in 2022.
Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org>
* Replace symlinks
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
* updated to reedline generic menus
* help menu with examples
* generic menus in the engine
* description menu template
* list of menus in config
* default value for menu
* menu from block
* generic menus examples
* change to reedline git path
* cargo fmt
* menu name typo
* remove commas from default file
* added error message
Enables the use of some features on reedline
- Keeping the line when clearing the screen with `Ctrl-L`
- Using the internal cut buffer between lines
- Submitting external commands via keybinding and keeping the line
Additional effect:
Keep the history around and do basic syncs (performance improvement
minimal as session changes have to be read and written)
Additional change:
Give the option to defer writing/rereading the history file to the
closing of the session ($config.sync_history_on_enter)
* nu-completer with suggestions
* help menu with scrolling
* updates description rows based on space
* configuration for help menu
* update nu-ansi-term
* corrected test for update cells
* changed keybinding
