# Description
Just spot that there are some duplicate code about checking external
runs to failed, is pr is trying to refactor it and reduce lines of code
# User-Facing Changes
NaN
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We've added some shapes recently. This PR adds them to the
default_config and sorts them in order to make finding missing ones
easier.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7342. `0..1000 | table` before this change:
`0..1000 | table` after this change:
When piping data to `table`, pages were not getting a newline at the
end[^1]. This problem was uncovered and exacerbated by the new
`display_output` hook which implicitly piped _everything_ to `table`.
## The Fix
`PagingTableCreator` now adds a newline to each page instead of relying
on later code to do it.
## Tests
I spent a while trying to write a regression test for this behaviour but
I couldn't get the test to fail before my fix! I think the test
infrastructure does something special with newlines when it's checking
command output. I eventually ran out of steam trying to investigate
that, sorry.
[^1]: unless the pipe to table was the implicit one that's done when
there is no `display_output` hook set. That situation was still working
OK.
Change in `mkdir` `-s` flag to `-v` to be similar to other commands
# Description
Other commands like `rm`, `mv`, `cp` have a `-v` (`--verbose`) flag.
`mkdir` has a `-s` (`--show-created-paths`), but should be consistent
with other commands.
# User-Facing Changes
- flag `-s` replaced by `-v` in `mkdir` command.
# Tests + Formatting
```
> mkdir -v new_dir
╭───┬───────────────────────────────────╮
│ 0 │ C:\Users\ricardo.monteiro\new_dir │
╰───┴───────────────────────────────────╯
```
# Description
This PR adds missing items in `parse_shape_name`, sorts the
`SyntaxShape` enum and the `Type` enum. It's a pain to hunt around for
particular items in an enum when they're unsorted.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#6773.
```
/home/gabriel/CodingProjects/nushell〉ls -r 12/12/2022 02:57:35 PM
Error: nu::parser::unknown_flag (link)
× The `ls` command doesn't have flag `-r`.
╭─[entry #1:1:1]
1 │ ls -r
· ┬
· ╰── unknown flag
╰────
help: Available flags: --help(-h), --all(-a), --long(-l), --short-names(-s), --full-paths(-f), --du(-d), --directory(-D). Use `--help` for more information.
```
# User-Facing Changes
Different error for unknown flag.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
add input_output_types() to benchmark, cd and config reset commands
It's an update to https://github.com/nushell/nushell/issues/7320
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Reverts nushell/nushell#7448
Some surprising behavior in how we do this. For example:
```
〉if (true || false) { print "yes!" } else { print "no!" }
no!
〉if (true or false) { print "yes!" } else { print "no!" }
yes!
```
This means for folks who are using the old `||`, they possibly get the
wrong answer once they upgrade. I don't think we can ship with that as
it will catch too many people by surprise and just make it easier to
write buggy code.
Closes#7431. In a nutshell:
- `run_hook_block()` in repl.rs was collecting all input into a `Value`
instead of handling streaming input properly
- this was a problem because now we have a default `display_output` hook
that _everything_ gets piped to
- this PR fixes the problem by tweaking `run_hook_block()` to return a
`PipelineData` instead of a `Value`
After this change, individual pages are rendered as they finish. This is
a little easier to see if I tweak `STREAM_PAGE_SIZE` in table.rs to 10:
## Future work
This does _not_ fix https://github.com/nushell/nushell/issues/7342.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We got some feedback from folks used to other shells that `try/catch`
isn't quite as convenient as things like `||`. This PR adds `&&` as a
synonym for `;` and `||` as equivalent to what `try/catch` would do.
# User-Facing Changes
Adds `&&` and `||` pipeline operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7216
Adds `interact-once` switch which numbers out the number of files to
delete and asks the user for confirmation.
```
/home/gabriel/test〉ls 12/11/2022 11:25:42 AM
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ a.txt │ file │ 0 B │ now │
│ 1 │ b.txt │ file │ 0 B │ now │
│ 2 │ c.txt │ file │ 0 B │ now │
╰───┴───────┴──────┴──────┴──────────╯
/home/gabriel/test〉rm *.txt -I 12/11/2022 11:25:42 AM
rm: remove 3 files? : y
/home/gabriel/test〉ls 12/11/2022 11:25:51 AM
/home/gabriel/test〉 12/11/2022 11:25:54 AM
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7404Fixes: #7402
## About change
In `eval_block`, all pipelines(or called statements?) result will be
printed except the last one, the last one is returned by `eval_block`
function.
So if we want to print the last statement in eval block, we just need to
print that value.
# User-Facing Changes
### for
```
❯ for _ in 1..2 { echo "a" }
a
a
```
### while
```
❯ mut x = 1; while $x < 3 { $x = $x + 1; echo bb; }
bb
bb
```
### loop
```
❯ mut total = 0; loop {
∙ if $total > 1 {
∙ break
∙ } else {
∙ $total += 1
∙ }
∙ echo 3
∙ }
3
3
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The message arrow is altered to show the external command name in case
it wasn't obvious. (See example for an occasion where it is
non-obvious).
BEFORE:
```
〉else if (2mb) > 4mb
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #35:1:1]
1 │ else if (2mb) > 4mb
· ─┬
· ╰── Cannot convert filesize to a string
╰────
help: All arguments to an external command need to be string-compatible
```
AFTER:
```
〉else if (2mb) > 4mb
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #3:1:1]
1 │ else if (2mb) > 4mb
· ─┬
· ╰── Cannot convert filesize to a string argument for 'else'
╰────
help: All arguments to an external command need to be string-compatible
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR changes some commands that previously accepted row conditions
(like `$it > 5`) as parameter to accept closures instead. The reasons
are:
a) The commands would need to move into parser keywords in the future
while they feel more like commands to be implemented in Nushell code as
a part of standard library.
b) In scripts, it is useful to store the predicate condition in a
variable which you can't do with row conditions.
c) These commands are not used that often to benefit enough from the
shorter row condition syntax
# User-Facing Changes
The following commands now accept **closure** instead of a **row
condition**:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
This is a part of an effort to move away from shape-directed parsing.
Related PR: https://github.com/nushell/nushell/pull/7365
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Changes the `FILE_PWD` setting mechanism to match the one used in the
`use` command.
Fixes https://github.com/nushell/nushell/pull/7424
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When running `nu script.nu`, the `$env.FILE_PWD` will be set to the
directory where the script is.
Also makes the error message a bit nicer:
```
> target/debug/nu asdihga
Error: nu:🐚:file_not_found (link)
× File not found
╭─[source:1:1]
1 │ nu
· ▲
· ╰── Could not access file 'asdihga': "No such file or directory (os error 2)"
╰────
```
# User-Facing Changes
`FILE_PWD` environment variable is available when running a script as
`nu script.nu`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes https://github.com/nushell/nushell/issues/6708
The error message of environment variable not found could change
depending on the `$env` content which can produce random failures on
different systems. This PR hopefully makes the tests more resilient.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR moves the `where` command to a parser keyword. While it still
uses the shape-directed parsing dictated by the signature, we're free to
change the parsing code now to a custom one once we remove the syntax
shapes.
As a side effect, the `where -b` flag was removed and its functionality
has moved to the new `filter` command.
Just FYI, other commands that take row conditions:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
We can either move these to the parser as well or make them accept a
closure instead of row condition.
# User-Facing Changes
New `filter` command which replaces `where -b` functionality.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7389
Make split row works more like python or rust, especially, when the
input string stars/ends with separator, append a empty string to result.
Here are examples:
python:
```python
In [6]: "\nasdf\nghi\n".split("\n")
Out[6]: ['', 'asdf', 'ghi', '']
```
rust:
```rust
fn main() {
let x = "\nabc\ndef\n";
let y = x.split("\n").collect::<Vec<&str>>();
println!("{:?}", y); // outputs: ["", "abc", "def", ""]
}
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7059. Rather than generate a new Record each time $env.config is
accessed (as described in that issue), instead `$env.config = ` now A)
parses the input record, then B) un-parses it into a clean Record with
only the valid values, and stores that as an env-var. The reasoning for
this is that I believe `config_to_nu_record()` (the method that performs
step B) will be useful in later PRs. (See below)
As a result, this also "fixes" the following "bug":
```
〉$env.config = 'butts'
$env.config is not a record
〉$env.config
butts
```
~~Instead, `$env.config = 'butts'` now turns `$env.config` into the
default (not the default config.nu, but `Config::default()`, which
notably has empty keybindings, color_config, menus and hooks vecs).~~
This doesn't attempt to fix#7110. cc @Kangaxx-0
# Example of new behaviour
OLD:
```
〉$env.config = ($env.config | merge { foo: 1 })
$env.config.foo is an unknown config setting
〉$env.config.foo
1
```
NEW:
```
〉$env.config = ($env.config | merge { foo: 1 })
Error:
× Config record contains invalid values or unknown settings
Error:
× Error while applying config changes
╭─[entry #1:1:1]
1 │ $env.config = ($env.config | merge { foo: 1 })
· ┬
· ╰── $env.config.foo is an unknown config setting
╰────
help: This value has been removed from your $env.config record.
〉$env.config.foo
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #1:1:1]
1 │ $env.config = ($env.config | merge { foo: 1 })
· ──┬──
· ╰── value originates here
╰────
╭─[entry #2:1:1]
1 │ $env.config.foo
· ─┬─
· ╰── cannot find column 'foo'
╰────
```
# Example of new errors
OLD:
```
$env.config.cd.baz is an unknown config setting
$env.config.foo is an unknown config setting
$env.config.bar is an unknown config setting
$env.config.table.qux is an unknown config setting
$env.config.history.qux is an unknown config setting
```
NEW:
```
Error:
× Config record contains invalid values or unknown settings
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:267:1]
267 │ abbreviations: true # allows `cd s/o/f` to expand to `cd some/other/folder`
268 │ baz: 3,
· ┬
· ╰── $env.config.cd.baz is an unknown config setting
269 │ }
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:269:1]
269 │ }
270 │ foo: 1,
· ┬
· ╰── $env.config.foo is an unknown config setting
271 │ bar: 2,
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:270:1]
270 │ foo: 1,
271 │ bar: 2,
· ┬
· ╰── $env.config.bar is an unknown config setting
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:279:1]
279 │ }
280 │ qux: 4,
· ┬
· ╰── $env.config.table.qux is an unknown config setting
281 │ }
╰────
help: This value has been removed from your $env.config record.
Error:
× Error while applying config changes
╭─[C:\Users\Leon\AppData\Roaming\nushell\config.nu:285:1]
285 │ file_format: "plaintext" # "sqlite" or "plaintext"
286 │ qux: 2
· ┬
· ╰── $env.config.history.qux is an unknown config setting
287 │ }
╰────
help: This value has been removed from your $env.config record.
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Address part of feature request #7337, add a small command `into
cellpath` to allow string -> cellpath auto-conversion, with this change,
we could run
```
let p = 'ls.use_ls_colors'
$env.config | upsert ($p | nito cellpath) false
```
<img width="710" alt="image"
src="https://user-images.githubusercontent.com/85712372/206782818-3024b34f-150b-482d-aebc-9426ef6a1cf9.png">
Note - This pr only covers `String` -> `CellPath`, any other conversions
should be considered as expected?
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When `seq date` was changed to remove the `-s` param, the example was
missed. This PR removes that example.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
val: a,
span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes#7407.
```
/home/gabriel/CodingProjects/nushell〉if false { 'a' } else { $foo } 12/09/2022 08:14:48 PM
Error: nu::parser::variable_not_found (link)
× Variable not found.
╭─[entry #1:1:1]
1 │ if false { 'a' } else { $foo }
· ──┬─
· ╰── variable not found
╰────
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Adds new command `math log` that takes as a required positional argument
a base.
Specialized for `math log 2` and `math log 10` for better performance
and precision that matches the expectations there. This leads to
discontinuities in numerical error but should make a better trade-off
for common usecases.
Example testing of the happy path
# Description
Fixes#5424. Checking the code, apparently this was always supposed to
work; however, because it compared the `Suggestion`s directly, and
internal commands had descriptions while external commands did not, it
never did function properly.
# User-Facing Changes
Completing to external commands (with overlap) adds a caret so the
external command is actually run.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The "tab" key now cycles completions in all editor modes, not just
emacs.
# User-Facing Changes
Updated default config
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds improved errors for when a user uses a bashism that nu doesn't
support.
fixes#7237
Examples:
```
Error: nu::parser::shell_andand (link)
× The '&&' operator is not supported in Nushell
╭─[entry #1:1:1]
1 │ ls && ls
· ─┬
· ╰── instead of '&&', use ';' or 'and'
╰────
help: use ';' instead of the shell '&&', or 'and' instead of the boolean '&&'
```
```
Error: nu::parser::shell_oror (link)
× The '||' operator is not supported in Nushell
╭─[entry #8:1:1]
1 │ ls || ls
· ─┬
· ╰── instead of '||', use 'try' or 'or'
╰────
help: use 'try' instead of the shell '||', or 'or' instead of the boolean '||'
```
```
Error: nu::parser::shell_err (link)
× The '2>' shell operation is 'err>' in Nushell.
╭─[entry #9:1:1]
1 │ foo 2> bar.txt
· ─┬
· ╰── use 'err>' instead of '2>' in Nushell
╰────
```
```
Error: nu::parser::shell_outerr (link)
× The '2>&1' shell operation is 'out+err>' in Nushell.
╭─[entry #10:1:1]
1 │ foo 2>&1 bar.txt
· ──┬─
· ╰── use 'out+err>' instead of '2>&1' in Nushell
╰────
help: Nushell redirection will write all of stdout before stderr.
```
# User-Facing Changes
**BREAKING CHANGES**
This removes the `&&` and `||` operators. We previously supported by
`&&`/`and` and `||`/`or`. With this change, only `and` and `or` are
valid boolean operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Ooops, fix the input redirection logic so we don't break vim.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
fixes#7384
This is a stop-gap fix until we remove type-directed parsing. With this,
you can create a `OneOf` shape that can be one of a list of syntax
shapes. This gives you a little more control than you get with `Any`,
allowing you to add `Block` without breaking other parsing rules.
# User-Facing Changes
`else` block will no longer capture variables as it will now use a block
instead of a closure.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix semicolon working for the following commands which runs to failed:
1. into record (example: `into record; echo 'aa'`) -- the final aa
shouldn't be printed
2. save ( example: `touch a; chmod a-w a; echo 'aa' | save a; echo asdf`
) -- the final asdf shouldn't be printed
3. fetch ( example: `touch a; chmod a-w a; fetch https://www.google.com
-o a; echo asdf` ) -- the final asdf shouldn't be printed
4. registry_query (I don't have window machine, sorry for that I can't
demo for it)
I've reviewed most of built-in commands, and it seems that other
commands works fine.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Title.
# User-Facing Changes
Faster seq that works better with functions that take in `ListStream`s.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
The block+closure split broke `watch` for some use cases. Fixed.
We should eventually add some tests for `watch` but it's a little tricky
since it's an interactive command.
Closes#7362.
# Description
Try to fix#7347, this pr does not fix the error message to `upserting
beyond 1 + the list's length doesn't work,`, I feel this is still not
explicit or general engouh, if we want to change, what would be the best
message to be printed out ?
Add tests too
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7110. ~~Note that unlike "real" `mut` vars, $env can be deeply
mutated via stuff like `$env.PYTHON_IO_ENCODING = utf8` or
`$env.config.history.max_size = 2000`. So, it's a slightly awkward
special case, arguably justifiable because of what $env represents (the
environment variables of your system, which is essentially "outside"
normal Nushell regulations).~~
EDIT: Now allows all `mut` vars to be deeply mutated using `=`, on
request.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
```rust
ToCsv
```
ToCsv was in there twice so I removed the 2nd reference...
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7278
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Add the input_output_types() to the ansi gradient command in support of
#7320
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
After the 0.72.1 hotfix, let's bump our dev builds to 0.72.2.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This change makes SQLite queries (`open foo.db`, `open foo.db | query db
"select ..."`) cancellable using `ctrl+c`. Previously they were not
cancellable, which made it unpleasant to accidentally open a very large
database or run an unexpectedly slow query!
UX-wise there's not too much to show:
## Notes
I was hoping to make SQLite queries streamable as part of this work, but
I ran into 2 problems:
1. `rusqlite` lifetimes are nightmarishly complex and they make it hard
to create a `ListStream` iterator
2. The functions on Nu's `CustomValue` trait return `Value` not
`PipelineData` and so `CustomValue` implementations can't stream data
AFAICT.
# Description
Windows doesn't support the --signal(-s) option, so don't show the
example in help.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
FIx the typo of `List` and also add more comments to other variants
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR changes the `schema` command for viewing the schema of a SQLite
database file. It removes 1 level of nesting (intended to handle
multiple databases in the same connection) that I believe is
unnecessary.
### Before
### After
## Rationale
A SQLite database connection can technically be associated with multiple
non-temporary databases using [the ATTACH DATABASE
command](https://www.sqlite.org/lang_attach.html). But it's not possible
to do that _in the context of Nushell_, and so I believe that there is
no benefit to displaying the schema as if there could be multiple
databases.
I initially raised this concern back in April, but we decided to keep
the database nesting because at the time we were still looking into more
generalized database functionality (i.e. not just SQLite). I believe
that rationale no longer applies.
Also, the existing code would not have worked correctly even if a
connection had multiple databases; for every database, it was looking up
tables without filtering them by database:
6295b20545/crates/nu-command/src/database/values/sqlite.rs (L104-L118)
## Future Work
I'd like to add information on views+triggers to the `schema` output.
I'm also working on making it possible to `ctrl+c` reading from a
database (which is turning into a massive yak shave).
# Description
This PR adds the ability to easily specific background colors using the
ansi command. It also allows you to use attributes.
I also updated the grid output to be clear that the output includes an
escape character, represented here by `\e`.
# User-Facing Changes
You can see a list of these new items with `ansi --list` with their long
and short names.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
# Description
Closes: #7208
After this pr, histogram will output by count descending
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7246 and #1898.
Darren noticed that `open /dev/random` could not be interrupted by
`ctrl+c`. Thankfully the solution was very simple; it looks like we just
forgot to check `ctrlc` in the `impl Iterator for RawStream`!
To reproduce this, just run `open /dev/random` and then cancel it with
`ctrl+c`.
# Description
This simply adds an alias to the explore quit command in order to quit
out of explore. `:q` and `:q!` work now.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* Various help messages were edited for clarity/grammar/etc.
* Some examples were made more interesting or relevant
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* `$env.config.explore_config` renamed to `$env.config.explore`. This
follows the principle that config subrecords relating to single commands
(as this relates to `explore`) should be exactly named after the command
(see `ls`, `rm`, `table` etc.)
* In `into_config()`, moved the match arm relating to
`$env.config.explore` out of the "legacy options" section (which is
slated for removal in a later version).
# User-Facing Changes
`explore` is not in any public releases yet, so this has no end-user
impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The `where -b` flag was broken. The following now works:
```
let cond = {|x| $x.name !~ 'foo'}; ls | where -b $cond
```
This is just a quick fix. Ultimately, the `where` command shouldn't need
the flag and `where $cond` should work. The first step, however, is to
move `where` away from shape-directed parsing and make it a parser
keyword.
# User-Facing Changes
`where -b` is not broken
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Just some minor updates to xml deps
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7298
So `try .. catch` works better on external command failed.
# User-Facing Changes
```
try {nu --testbin fail} catch {print "fail"}
```
After this pr, it will output "fail"
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
# Description
* `-n`, `--natural` flag from `sort-by` is now on the plain `sort`.
* The `-i`, `-n` and `-r` flags now work with single record sorting
(formerly they didn't)
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is one of many commands that needs the `input_output_types()` part
of the signature filled in so that `$nu.scope.commands` shows the
signature properly which leads to the documentation being updated
properly.
TIL that when commands like `cal` don't have Example tests that can
easily be expressed and require the use of `None` results that we need
to use this as part of the signature.
```rust
.allow_variants_without_examples(true) // TODO: supply exhaustive examples
```
Related to https://github.com/nushell/nushell/issues/7287
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #6920
# User-Facing Changes
```
❯ "asdf" | save dump.rdb
Error:
× Destination file already exists
╭─[entry #21:1:1]
1 │ "asdf" | save dump.rdb
· ────┬───
· ╰── Destination file '/tmp/dump.rdb' already exists
╰────
help: you can use -f, --force to force overwriting the destination
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Warning: the `nu-json` crate seems to be undertested as the main test
code is commented out. Thus the unused dependencies there were just
commented out
# Description
Closes#7257
This fixes an issue where dataframes would always try to convert
datetimes with milliseconds. Since the timeunit is passed in, I make use
of it and try to choose the appropriate divisor.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Just bumping to the next dev version. Submitting as a draft until we're
ready.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This upgrades the `windows` and `trash` crates so we are only compiling
1 version of the `windows` crate ([I recently upgraded the version used
in `trash`](https://github.com/Byron/trash-rs/pull/58)).
I was hoping that this would lead to some decent compile time
improvements, but unfortunately it did not. Compiling 1 version of
`windows` with all the features unified is about as slow as compiling 2
versions with distinct feature sets. Still, might as well upgrade.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
I was thinking that it may be helpful to have a more verbose description
of our operators. Please let me know if you have better wording.
Also, while not strictly considered an operator, i added `not` to avoid
some confusion.
<img width="1574" alt="Screenshot 2022-11-28 at 7 57 30 PM"
src="https://user-images.githubusercontent.com/343840/204419666-7c4dbb43-26f5-4cd5-9a4e-a1555a9e700f.png">
# User-Facing Changes
Adds description column
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a new command called `help operators`. The intention is to
make nushell's operators more discoverable.
Operations are evaluated in the precedence order (from highest to
lowest).
<img width="737" alt="Screenshot 2022-11-26 at 7 23 15 PM"
src="https://user-images.githubusercontent.com/343840/204115311-56765517-c36d-44d5-b303-43ffc0e980f6.png">
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fixes the compilation problems with `aarch64-apple-darwin` on rust
1.64 as well as the `zstd` problems. We recently found out that `zstd`
pinned to 1.65.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
chrono version update
# Description
upgrade chrono to 0.4.23
# Major Changes
If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!
# Tests + Formatting
Make sure you've done the following, if applicable:
- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
We already have the binary `bit-xor` and the shortcircuiting logical
`or`(`||`) and `and`(`&&`).
This introduces `xor` as a compact form for both brevity and clarity.
You can express the operation through `not`/`and`/`or` with a slight
risk of introducing bugs through typos.
Operator precedence
`and` > `xor` > `or`
Added logic and precedence tests.
# Description
This command converts things into records.
<img width="466" alt="Screenshot 2022-11-24 at 2 10 54 PM"
src="https://user-images.githubusercontent.com/343840/203858104-0e4445da-9c37-4c7c-97ec-68ec3515bc4b.png">
<img width="716" alt="Screenshot 2022-11-24 at 5 04 11 PM"
src="https://user-images.githubusercontent.com/343840/203872621-48cab199-ba57-44fe-8f36-9e1469b9c4ef.png">
It also converts dates into record but I couldn't get the test harness
to accept an example.
Thanks to @WindSoilder for writing the "hard" parts of this. :)
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
