Commit Graph

1198 Commits

Author SHA1 Message Date
Hofer-Julian
a775cfe177
Clean up nu-cli/src/eval_file.rs (#7804)
- Replace `match` with `unwrap_or_else` or `if let`
- Remove unnecessary `mut`
- Check if file path has a parent
- Reduce visibility to `pub(crate)`
2023-01-20 13:45:34 -08:00
Xoffio
6a43e1a64d
Add test for fix of issue #7754 (#7756)
Fix already landed with #7779
2023-01-19 11:19:27 +01:00
Reilly Wood
3b5172a8fa
LazyRecord (#7619)
This is an attempt to implement a new `Value::LazyRecord` variant for
performance reasons.

`LazyRecord` is like a regular `Record`, but it's possible to access
individual columns without evaluating other columns. I've implemented
`LazyRecord` for the special `$nu` variable; accessing `$nu` is
relatively slow because of all the information in `scope`, and [`$nu`
accounts for about 2/3 of Nu's startup time on
Linux](https://github.com/nushell/nushell/issues/6677#issuecomment-1364618122).

### Benchmarks

I ran some benchmarks on my desktop (Linux, 12900K) and the results are
very pleasing.

Nu's time to start up and run a command (`cargo build --release;
hyperfine 'target/release/nu -c "echo \"Hello, world!\""' --shell=none
--warmup 10`) goes from **8.8ms to 3.2ms, about 2.8x faster**.

Tests are also much faster! Running `cargo nextest` (with our very slow
`proptest` tests disabled) goes from **7.2s to 4.4s (1.6x faster)**,
because most tests involve launching a new instance of Nu.

### Design (updated)

I've added a new `LazyRecord` trait and added a `Value` variant wrapping
those trait objects, much like `CustomValue`. `LazyRecord`
implementations must implement these 2 functions:

```rust
// All column names
fn column_names(&self) -> Vec<&'static str>;

// Get 1 specific column value
fn get_column_value(&self, column: &str) -> Result<Value, ShellError>;
 ```

### Serializability

`Value` variants must implement `Serializable` and `Deserializable`, which poses some problems because I want to use unserializable things like `EngineState` in `LazyRecord`s. To work around this, I basically lie to the type system:

1. Add `#[typetag::serde(tag = "type")]` to `LazyRecord` to make it serializable
2. Any unserializable fields in `LazyRecord` implementations get marked with `#[serde(skip)]`
3. At the point where a `LazyRecord` normally would get serialized and sent to a plugin, I instead collect it into a regular `Value::Record` (which can be serialized)
2023-01-18 19:27:26 -08:00
Xoffio
8acced56b2
Fixes Issue 7648 which crashes nushell and happens when an alias name is shorter than the alias command and the alias command is an external command. (#7779) 2023-01-17 08:30:00 +02:00
Darren Schroeder
b0b0482d71
Add cursor shape configuration for each edit mode (#7745)
# Description

This PR allows the configuration of cursor shapes in nushell for each
edit mode. This is the change that is in the default_config.nu file.
```
  cursor_shape: {
    emacs: line # block, underscore, line (line is the default)
    vi_insert: block # block, underscore, line (block is the default)
    vi_normal: underscore # block, underscore, line  (underscore is the default)
  }
```

# User-Facing Changes

See above. If you'd prefer a different default, please speak up and let
us know.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-01-13 14:37:39 -06:00
WindSoilder
8aa2632661
Support redirect err and out to different streams (#7685)
# Description

Closes: #7364 

# User-Facing Changes

Given the following shell script:
```bash
x=$(printf '=%.0s' {1..100})
echo $x
echo $x 1>&2
```

It supports the following command:
```
bash test.sh out> out.txt err> err.txt
```

Then both `out.txt` and `err.txt` will contain `=`(100 times)

## About the change

The core idea is that when doing lite-parsing, introduce a new variant
`LiteElement::SeparateRedirection` if we meet two Redirection
token(which is generated by `lex` function),
During converting from lite block to block,
`LiteElement::SeparateRedirection` will be converted to
`PipelineElement::SeparateRedirection`.

Then in the block eval process, if we get
`PipelineElement::SeparateRedirection`, we invoke `save` command with
`--stderr` arguments to acthive our behavior.



## What happened internally?
Take the following command as example:
```
^ls out> out.txt err> err.txt
```

lex parsing result(`Tokens`) are not changed, but `LiteBlock` and
`Block` is changed after this pr.

### LiteBlock before
```rust
LiteBlock {
    block: [
        LitePipeline { commands: [
            Command(None, LiteCommand { comments: [], parts: [Span { start: 39041, end: 39044 }] }),
            // actually the span of first Redirection is wrong too..
            Redirection(Span { start: 39058, end: 39062 }, Stdout, LiteCommand { comments: [], parts: [Span { start: 39050, end: 39057 }] }),
            Redirection(Span { start: 39058, end: 39062 }, Stderr, LiteCommand { comments: [], parts: [Span { start: 39063, end: 39070 }] })
        ]
    }]
}
```
### LiteBlock after
```rust
LiteBlock {
    block: [
        LitePipeline { commands: [
            Command(
                None, 
                LiteCommand { comments: [], parts: [Span { start: 38525, end: 38528 }] }),
                // new one! two Redirection merged into one SeparateRedirection.
                SeparateRedirection { 
                    out: (Span { start: 38529, end: 38533 }, LiteCommand { comments: [], parts: [Span { start: 38534, end: 38541 }] }),
                    err: (Span { start: 38542, end: 38546 }, LiteCommand { comments: [], parts: [Span { start: 38547, end: 38554 }] })
                }
        ]
    }]
}
```

### Block before
```rust
Pipeline {
    elements: [
        Expression(None, Expression {
            expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 39042, end: 39044 }, ty: String, custom_completion: None }, [], false),
            span: Span { start: 39041, end: 39044 },
            ty: Any, custom_completion: None 
        }),
        Redirection(Span { start: 39058, end: 39062 }, Stdout, Expression { expr: String("out.txt"), span: Span { start: 39050, end: 39057 }, ty: String, custom_completion: None }),
        Redirection(Span { start: 39058, end: 39062 }, Stderr, Expression { expr: String("err.txt"), span: Span { start: 39063, end: 39070 }, ty: String, custom_completion: None })] }
```

### Block after
```rust
Pipeline {
    elements: [
        Expression(None, Expression {
            expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 38526, end: 38528 }, ty: String, custom_completion: None }, [], false),
            span: Span { start: 38525, end: 38528 },
            ty: Any,
            custom_completion: None 
        }),
        // new one! SeparateRedirection
        SeparateRedirection {
            out: (Span { start: 38529, end: 38533 }, Expression { expr: String("out.txt"), span: Span { start: 38534, end: 38541 }, ty: String, custom_completion: None }),
            err: (Span { start: 38542, end: 38546 }, Expression { expr: String("err.txt"), span: Span { start: 38547, end: 38554 }, ty: String, custom_completion: None }) 
        }
    ]
}
```
# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-01-12 10:22:30 +01:00
dependabot[bot]
d4d28ab796
Bump once_cell from 1.16.0 to 1.17.0 (#7732) 2023-01-11 23:00:44 +00:00
Stefan Holderbach
1ae9157985
Bump to 0.74.1 development version (#7721)
# Description

May be used for hotfix if needed
2023-01-11 22:30:41 +01:00
Reilly Wood
5664ee7bda
Remove engine_state clones in REPL eval (#7713)
A small but easy optimization for `evaluate_repl()`: clone
`engine_state` 1x instead of 3x.

This reduces time spent in a simple REPL eval (`enter` key pressed with
no command text) by about 10%, as measured in
[Superluminal](https://superluminal.eu/).
2023-01-10 17:22:32 -08:00
Stefan Holderbach
8044fb2db0
Bump version to 0.74.0 (#7718)
Preparing the release
2023-01-10 20:58:13 +01:00
WindSoilder
f609a4f26a
Auto-Completion: put ` tildes around filenames with parentheses (#7712)
# Description

Fixes: #7706

# User-Facing Changes


![img](https://user-images.githubusercontent.com/22256154/211286663-3d07a650-5e2d-406e-99f6-cff90dba352b.png)


# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
2023-01-10 20:41:54 +01:00
Michael Angerman
5879b0df99
clean up some extra logging code in the cli (#7709)
I have been recently going through some info logging in the cli and
noticed that there is too much info being printed to get a handle on
whats going on...

This is an attempt to do some minor logging clean up to print out "less
stuff",
in info logging mode mainly having to do with the prompt...

If someone really want to see what is going on they can very easily add
it
back in without too much trouble.
2023-01-08 15:05:46 -05:00
Piotr Meyer
b17e9f4ed0
Extend config support from F1-F12 to F1-F20, #7666 (#7669)
Co-authored-by: Piotr Meyer <aniou@smutek.pl>
2023-01-03 22:00:21 +01:00
Leon
65d0b5b9d9
Make get hole errors and cell path hole errors identical (improvement on #7002) (#7647)
# Description

This closes #7498, as well as fixes an issue reported in
https://github.com/nushell/nushell/pull/7002#issuecomment-1368340773

BEFORE:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)

  × Cannot find column
   ╭─[entry #5:1:1]
 1 │ [{foo: 'bar'} {}] | get foo
   · ────────┬────────   ─┬─
   ·         │            ╰── value originates here
   ·         ╰── cannot find column 'Empty cell'
   ╰────

〉[{foo: 'bar'} {}].foo
╭───┬─────╮
│ 0 │ bar │
│ 1 │     │
╰───┴─────╯
```
AFTER:
```
〉[{foo: 'bar'} {}] | get foo
Error: nu:🐚:column_not_found (link)

  × Cannot find column
   ╭─[entry #1:1:1]
 1 │ [{foo: 'bar'} {}] | get foo
   ·               ─┬        ─┬─
   ·                │         ╰── cannot find column 'foo'
   ·                ╰── value originates here
   ╰────

〉[{foo: 'bar'} {}].foo
Error: nu:🐚:column_not_found (link)

  × Cannot find column
   ╭─[entry #3:1:1]
 1 │ [{foo: 'bar'} {}].foo
   ·               ─┬  ─┬─
   ·                │   ╰── cannot find column 'foo'
   ·                ╰── value originates here       
   ╰────
```

EDIT: This also changes the semantics of `get`/`select` `-i` somewhat.
I've decided to leave it like this because it works more intuitively
with `default` and `compact`.
BEFORE:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
null
```
AFTER:
```
〉[{a:1} {b:2} {a:3}] | select -i foo | to nuon
[[foo]; [null], [null], [null]]
```

# User-Facing Changes

See above. EDIT: the issue with holes in cases like ` [{foo: 'bar'}
{}].foo.0` versus ` [{foo: 'bar'} {}].0.foo` has been resolved.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-01-02 14:45:43 -08:00
Darren Schroeder
db06edc5d3
add --mime-type(-m) to ls in the type column (#7616)
# Description

This PR adds the `mime-type` to the `type` column if you add the
`--mime-type(-m)` flag to `ls`.
<img width="853" alt="Screenshot 2022-12-27 at 11 43 20 AM"
src="https://user-images.githubusercontent.com/343840/209705499-27fe40fe-0356-4d9d-97f2-4b2dc52e0963.png">

<img width="781" alt="Screenshot 2022-12-27 at 11 45 53 AM"
src="https://user-images.githubusercontent.com/343840/209705509-4d677389-fd68-401e-a7af-3fc6052743b6.png">

# User-Facing Changes

If you specify the `-m` flag, you get the "guessed at" mime type. The
guess is based on the file name and uses this crate
https://docs.rs/mime_guess/latest/mime_guess/ for the guessing.

Part of issue #7612 and and #7524

There's some debate on if the `mime-type` should be added to the `type`
column or if there should be a separate `mime` column. I tend to lean on
the side of `type` since it's technically a type and it's only in that
column if you ask it to be there. Also, I'd prefer to reuse a column
rather than having a list of sprawling columns. Also, as @KodiCraft
suggested, there is precedence as with `ls -d` where the summed size is
in the size column.

I could go either way and if someone wants to create a `mime` column,
we'd probably accept it.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-27 12:46:23 -06:00
Kian-Meng Ang
79000aa5e0
Fix typos by codespell (#7600)
# Description

Found via `codespell -S target -L
crate,ser,numer,falsy,ro,te,nd,bu,ndoes,statics,ons,fo,rouge,pard`

# User-Facing Changes

None.

# Tests + Formatting

None and done.

# After Submitting

None.
2022-12-26 02:31:26 -05:00
Stefan Holderbach
45fe3be83e
Further cleanup of Span::test_data usage + span fixes (#7595)
# Description

Inspired by #7592

For brevity use `Value::test_{string,int,float,bool}`

Includes fixes to commands that were abusing `Span::test_data` in their
implementation. Now the call span is used where possible or the explicit
`Span::unknonw` is used.

## Command fixes
- Fix abuse of `Span::test_data()` in `query_xml`
- Fix abuse of `Span::test_data()` in `term size`
- Fix abuse of `Span::test_data()` in `seq date`
- Fix two abuses of `Span::test_data` in `nu-cli`
- Change `Span::test_data` to `Span::unknown` in `keybindings listen`
- Add proper call span to `registry query`
- Fix span use in `nu_plugin_query`
- Fix span assignment in `select`
- Use `Span::unknown` instead of `test_data` in more places

## Other
- Use `Value::test_int`/`test_float()` consistently
- More `test_string` and `test_bool`
- Fix unused imports


# User-Facing Changes

Some commands may now provide more helpful spans for downstream use in
errors
2022-12-24 07:41:57 -06:00
Leon
11bdab7e61
Change instances of Value::string("foo", Span::test_data()) to Value::test_string("foo") (#7592) 2022-12-24 10:25:38 +01:00
pwygab
ead6fbdf9c
let case_insensitive option work for variable completion as well (#7539)
# Description

Fixes #7529.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-22 08:50:59 -06:00
Jakub Žádník
23a5c5dc09
Remove shape-directed import pattern parsing (#7570) 2022-12-22 16:36:13 +02:00
Jakub Žádník
757d7479af
Add "fall-through" signatures (#7527)
Fixes https://github.com/nushell/nushell/issues/4659
Fixes https://github.com/nushell/nushell/issues/5294
Fixes https://github.com/nushell/nushell/issues/6124
fix https://github.com/nushell/nushell/issues/5103
2022-12-22 00:33:26 +02:00
Stefan Holderbach
4e1f94026c
Add more input/output type annotations (#7532) 2022-12-21 20:20:46 +01:00
Stefan Holderbach
d27263af97
Bump to new development version 0.73.1 (#7544) 2022-12-21 12:35:50 -06:00
JT
1291b647ae
bump to 0.73 (#7542)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-20 21:58:48 +13:00
Stefan Holderbach
91df6c236f
Remove unused deps or move to devdeps (#7537)
# Description

General tree shaking through `cargo +nightly udeps` and moving mentions
of `nu-test-support` to the dev deps.

Also since #7488 no separate import of `nu-path` necessary

cc @webbedspace
2022-12-20 12:53:17 +13:00
Jaffar Ashoor
c3c41a61b0
replace lazy_static with once_cell (#7502)
replacing the dependence on `lazy_static` with `once_cell`, this will
ensure that variables are initialized when needed instead of startup
time.
2022-12-17 10:30:04 -08:00
Leon
774769a7ad
color_config now accepts closures as color values (#7141)
# Description

Closes #6909. You can now add closures to your `color_config` themes.
Whenever a value would be printed with `table`, the closure is run with
the value piped-in. The closure must return either a {fg,bg,attr} record
or a color name (`'light_red'` etc.). This returned style is used to
colour the value.

This is entirely backwards-compatible with existing config.nu files.

Example code excerpt:
```
let my_theme = {
    header: green_bold
    bool: { if $in { 'light_cyan' } else { 'light_red' } }
    int: purple_bold
    filesize: { |e| if $e == 0b { 'gray' } else if $e < 1mb { 'purple_bold' } else { 'cyan_bold' } }
    duration: purple_bold
    date: { (date now) - $in | if $in > 1wk { 'cyan_bold' } else if $in > 1day { 'green_bold' } else { 'yellow_bold' } }
    range: yellow_bold
    string: { if $in =~ '^#\w{6}$' { $in } else { 'white' } }
    nothing: white
```
Example output with this in effect:
![2022-11-16 12 47 23 AM - style_computer
rs_-_nushell_-_VSCodium](https://user-images.githubusercontent.com/83939/201952558-482de05d-69c7-4bf2-91fc-d0964bf71264.png)
![2022-11-16 12 39 41 AM - style_computer
rs_-_nushell_-_VSCodium](https://user-images.githubusercontent.com/83939/201952580-2384bb86-b680-40fe-8192-71bae396c738.png)
![2022-11-15 09 21 54 PM - run_external
rs_-_nushell_-_VSCodium](https://user-images.githubusercontent.com/83939/201952601-343fc15d-e4a8-4a92-ad89-9a7d17d42748.png)

Slightly important notes:

* Some color_config names, namely "separator", "empty" and "hints", pipe
in `null` instead of a value.
* Currently, doing anything non-trivial inside a closure has an
understandably big perf hit. I currently do not actually recommend
something like `string: { if $in =~ '^#\w{6}$' { $in } else { 'white' }
}` for serious work, mainly because of the abundance of string-type data
in the world. Nevertheless, lesser-used types like "date" and "duration"
work well with this.
* I had to do some reorganisation in order to make it possible to call
`eval_block()` that late in table rendering. I invented a new struct
called "StyleComputer" which holds the engine_state and stack of the
initial `table` command (implicit or explicit).
* StyleComputer has a `compute()` method which takes a color_config name
and a nu value, and always returns the correct Style, so you don't have
to worry about A) the color_config value was set at all, B) whether it
was set to a closure or not, or C) which default style to use in those
cases.
* Currently, errors encountered during execution of the closures are
thrown in the garbage. Any other ideas are welcome. (Nonetheless, errors
result in a huge perf hit when they are encountered. I think what should
be done is to assume something terrible happened to the user's config
and invalidate the StyleComputer for that `table` run, thus causing
subsequent output to just be Style::default().)
* More thorough tests are forthcoming - ran into some difficulty using
`nu!` to take an alternative config, and for some reason `let-env config
=` statements don't seem to work inside `nu!` pipelines(???)
* The default config.nu has not been updated to make use of this yet. Do
tell if you think I should incorporate that into this.

# User-Facing Changes

See above.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-17 07:07:56 -06:00
Reilly Wood
d9d9916ccc
Fix streaming page missing newline (#7466)
Fixes #7342. `0..1000 | table` before this change:


![image](https://user-images.githubusercontent.com/26268125/207474492-dead4267-d828-4840-8da0-4edfda3e3916.png)

`0..1000 | table` after this change:


![image](https://user-images.githubusercontent.com/26268125/207474583-26633db0-46c5-4c30-8681-654855e7042b.png)

When piping data to `table`, pages were not getting a newline at the
end[^1]. This problem was uncovered and exacerbated by the new
`display_output` hook which implicitly piped _everything_ to `table`.

## The Fix

`PagingTableCreator` now adds a newline to each page instead of relying
on later code to do it.

## Tests

I spent a while trying to write a regression test for this behaviour but
I couldn't get the test to fail before my fix! I think the test
infrastructure does something special with newlines when it's checking
command output. I eventually ran out of steam trying to investigate
that, sorry.

[^1]: unless the pipe to table was the implicit one that's done when
there is no `display_output` hook set. That situation was still working
OK.
2022-12-14 16:45:37 +13:00
JT
0c656fd276
Revert "Pipeline operators: && and ||" (#7452)
Reverts nushell/nushell#7448

Some surprising behavior in how we do this. For example:

```
〉if (true || false) { print "yes!" } else { print "no!" }
no!
〉if (true or false) { print "yes!" } else { print "no!" }
yes!
```

This means for folks who are using the old `||`, they possibly get the
wrong answer once they upgrade. I don't think we can ship with that as
it will catch too many people by surprise and just make it easier to
write buggy code.
2022-12-13 16:36:13 +13:00
Reilly Wood
b7a3e5989d
Make hook execution stream instead of collecting (#7440)
Closes #7431. In a nutshell:
- `run_hook_block()` in repl.rs was collecting all input into a `Value`
instead of handling streaming input properly
- this was a problem because now we have a default `display_output` hook
that _everything_ gets piped to
- this PR fixes the problem by tweaking `run_hook_block()` to return a
`PipelineData` instead of a `Value`

After this change, individual pages are rendered as they finish. This is
a little easier to see if I tweak `STREAM_PAGE_SIZE` in table.rs to 10:

![image](https://user-images.githubusercontent.com/26268125/206935370-412b2ee9-9401-4222-bc93-5bd5a9adc13b.png)

## Future work

This does _not_ fix https://github.com/nushell/nushell/issues/7342.
2022-12-12 15:23:04 -08:00
JT
35bea5e044
Pipeline operators: && and || (#7448)
# Description

We got some feedback from folks used to other shells that `try/catch`
isn't quite as convenient as things like `||`. This PR adds `&&` as a
synonym for `;` and `||` as equivalent to what `try/catch` would do.

# User-Facing Changes

Adds `&&` and `||` pipeline operators.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-13 09:53:46 +13:00
Jakub Žádník
f1000a17b4
Add FILE_PWD environment variable when running 'nu script.nu' (#7424)
# Description

When running `nu script.nu`, the `$env.FILE_PWD` will be set to the
directory where the script is.

Also makes the error message a bit nicer:
```
> target/debug/nu asdihga
Error: nu:🐚:file_not_found (link)

  × File not found
   ╭─[source:1:1]
 1 │ nu
   · ▲
   · ╰── Could not access file 'asdihga': "No such file or directory (os error 2)"
   ╰────

```

# User-Facing Changes

`FILE_PWD` environment variable is available when running a script as
`nu script.nu`.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-10 19:23:44 +02:00
Leon
220b105efb
Reduced LOC by replacing several instances of Value::Int {}, Value::Float{}, Value::Bool {}, and Value::String {} with Value::int(), Value::float(), Value::boolean() and Value::string() (#7412)
# Description

While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
  val: a,
  span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.

# User-Facing Changes

None.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-09 11:37:51 -05:00
pwygab
5a0e86aa70
fix external completions; add a caret when there is overlap (#7405)
# Description

Fixes #5424. Checking the code, apparently this was always supposed to
work; however, because it compared the `Suggestion`s directly, and
internal commands had descriptions while external commands did not, it
never did function properly.

# User-Facing Changes

Completing to external commands (with overlap) adds a caret so the
external command is actually run.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-09 22:27:50 +13:00
pwygab
b39d797c1f
Add quotes to hash file autocomplete (#7398)
# Description

Fixes #6741. Autocompleting a dir/file named something like foo#bar will
now complete to \`foo#bar\`
2022-12-08 21:37:10 +01:00
JT
eaec480f42
Improve empty pipelines (#7383)
# Description

This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.

This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.

# User-Facing Changes

None

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-08 07:31:57 +13:00
Darren Schroeder
017a13fa3f
bump to dev build v0.72.2 (#7360)
# Description

After the 0.72.1 hotfix, let's bump our dev builds to 0.72.2.

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-12-05 14:18:06 -06:00
Daniel Buch Hansen
850ecf648a
Protocol: debug_assert!() Span to reflect a valid slice (#6806)
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.

The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.

My hope is this will mitigate such senarios

1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241

# Description

(description of your pull request here)

# Tests

Make sure you've done the following:

- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.

Make sure you've run and fixed any issues with these commands:

- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass

# Documentation

- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
2022-12-03 11:44:12 +02:00
Darren Schroeder
3caab5de36
bump to dev release v0.72.1 (#7281)
# Description

Just bumping to the next dev version. Submitting as a draft until we're
ready.

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-30 16:06:22 -06:00
JT
9c800bcb2c
bump to 0.72 (#7272)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-29 20:17:23 +13:00
Access
9850fbd77d
chore: chrono_update (#7132)
chrono version update

# Description

upgrade chrono to 0.4.23

# Major Changes

If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!

# Tests + Formatting

Make sure you've done the following, if applicable:

- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass

# After Submitting

* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.

Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2022-11-27 07:19:02 +13:00
JT
62e34b69b3
New commands: break, continue, return, and loop (#7230)
# Description

This adds `break`, `continue`, `return`, and `loop`.

* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)

Examples:
```
for i in 1..10 {
    if $i == 5 {
       continue
    } 
    print $i
}
```

```
for i in 1..10 {
    if $i == 5 {
        break
    } 
    print $i
}
```

```
def foo [x] {
    if true {
        return 2
    }
    $x
}
foo 100
```

```
loop { print "hello, forever" }
```

```
[1, 2, 3, 4, 5] | each {|x| 
    if $x > 3 { break }
    $x
}
```

# User-Facing Changes

Adds the above commands.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-25 09:39:16 +13:00
JT
8cca447e8c
A set of fixes for stderr redirect (#7219)
# Description

This is a set of fixes to `err>` to make it work a bit more predictably.

I've also revised the tests, which accidentally tested the wrong thing
for redirection, but should be more correct now.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2022-11-24 16:58:15 +13:00
JT
74a73f9838
Stdout/Stderr redirection (#7185)
This adds new pipeline connectors called out> and err> which redirect either stdout or stderr to a file. You can also use out+err> (or err+out>) to redirect both streams into a file.
2022-11-23 07:26:13 +13:00
WindSoilder
d01ccd5a54
add signature information when get help on one command (#7079)
* add signature information when help on one command

* tell user that one command support operated on cell paths

Also, make type output to be more friendly, like `record<>` should just be `record`

And the same to `table<>`, which should be `table`

* simplify code

* don't show signatures for parser keyword

* update comment

* output arg syntax shape as type, so it's the same as describe command

* fix string when no positional args

* update signature body

* update

* add help signature test

* fix arg output format for composed data type like list or record

* fix clippy

* add comment
2022-11-20 07:22:42 -06:00
JT
6454bf69aa
Parser refactoring for improving pipelines (#7162)
* Remove lite_parse file

* Add LiteElement to represent different pipeline elem types

* Add PipelineElement to Pipelines

* Remove lite_parse specific tests
2022-11-19 10:46:48 +13:00
Jakub Žádník
81b12d02ec
Change parser cwd when running a file (#7134)
* Change parser cwd when running a file

* Add test

* Add missing file
2022-11-15 00:05:27 +01:00
Filip Andersson
817eacccd8
removes unused features. (#6938)
* removes unused features.

* Adds back multithreading feature to sysinfo.

* Adds back alloc for percent-encoding

* Adds updated lock file.

* Missed one sysinfo.

* `indexmap` just defaults

* Revert `miette``default-features=false`

Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
2022-11-12 18:44:56 +13:00
JT
13515c5eb0
Limited mutable variables (#7089)
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.

Mutable variables allow mutation via the assignment operator (=).

❯ mut x = 100
❯ $x = 200
❯ print $x
200

Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:

❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)

  × Capture of mutable variable.

The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.

Mutation can occur with fields as well, as in this case:

❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y

On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
2022-11-11 19:51:08 +13:00
JT
63433f1bc8
Split blocks and closures (#7075)
* Split closures and blocks

* Tests mostly working

* finish last fixes, passes all tests

* fmt
2022-11-10 21:21:49 +13:00