Commit Graph

1794 Commits

Author SHA1 Message Date
Maxim Zhiburt
b9be416937
Add colors in table --collapse (#8120)
close #8110 

cc: @amtoine

---------

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
2023-02-20 12:59:33 +00:00
Bob Hyman
0a8c9b22b0
string | fill counts clusters, not graphemes; and doesn't count ANSI escape codes (#8134)
Enhancement of new `fill` command (#7846) to handle content including
ANSI escape codes for formatting or multi-code-point Unicode grapheme
clusters.
In both of these cases, the content is (many) bytes longer than its
visible length, and `fill` was counting the extra bytes so not adding
enough fill characters.

# Description

This script:
```rust
# the teacher emoji `\u{1F9D1}\u{200D}\u{1F3EB}` is 3 code points, but only 1 print position wide.
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"\u{1F9D1}\u{200D}\u{1F3EB}" | fill -c "+" -w 3 -a "c"

echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"(ansi green)a(ansi reset)" | fill -c "+" -w 3 -a c
echo ""
```

Was producing this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
🧑‍🏫

This output should be 3 print positions wide, with leading and trailing `+`
a
```

After this PR, it produces this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
+🧑‍🏫+

This output should be 3 print positions wide, with leading and trailing `+`
+a+
```
# User-Facing Changes

Users may have to undo fixes they may have introduced to work around the
former behavior. I have one such in my prompt string that I can now
revert.

# Tests + Formatting

Don't forget to add tests that cover your changes.
-- Done

Make sure you've run and fixed any issues with these commands:

- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass

# After Submitting

`fill` command not documented in the book, and it still talks about `str
lpad/rpad`. I'll fix.

Note added dependency on a new library `print-positions`, which is an
iterator that yields a complete print position (cluster + Ansi sequence)
per call. Should this be vendored?
2023-02-20 06:32:20 -06:00
Antoine Stevan
88e07b5ea4
DOCUMENTATION: add a new "key-value" example to with-env (#8119)
hello there 👋 😋 

when messing around with `with-env`, looking at the examples, i did not
understand that we could directly run `with-env` with a record as the
argument and not from the input of a pipe 😮

even though the last example, i.e. 
```bash
  Set by row(e.g. `open x.json` or `from json`)
  > '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
```
, is equivalent, just the record comes from the pipe, i thought adding
that explicite new example could be helpful 😌
 
# Description
looking at the single real change of this PR, i.e. 86ef34e90, you can
see i've simply added
```bash
  Set by key-value record
  > with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
just before the example above

> **Note**
> i've also added spaces around the '|' in the last examples, from
> ```bash
>   > '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
> ```
> to
> ```bash
>   > '{"X":"Y","W":"Z"}' | from json | with-env $in { [$env.X $env.W] }
> ```
> hopefully making the pipeline a bit easier to read 👍

### hope you like that 😏 

# User-Facing Changes
a new example has been added to `with-env`

# Tests + Formatting
no tests have been added

# After Submitting
the change should not affect the website, i think

=> if i need to generate the associated `HTML` file on
https://github.com/nushell/nushell.github.io, please tell me 😋
2023-02-19 18:28:49 +00:00
Jérémy Audiger
66398fbf77
Factorize HTTP commands code (#8088)
# Description

In order to work on https://github.com/nushell/nushell/issues/2741, I'm
preparing the code.

# User-Facing Changes

Both commands do support the timeout option.

**But the timeout argument `-t, --timeout` has been migrated to `-m,
--max-time`**. I had to make a choice since there is another option
using the short command `t` which is "content-type".

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-17 23:10:29 +00:00
David Matos
1fd1a3a456
Support URLs in start command (#7799)
# Description
Fixes issue #7792 Fix basically by @kubouch , "stolen" by me :). Edit:
Added "proper" fix rather than the one liner
```
start Cargo.toml
// Opens in default editor 
```

```
start https://www.google.com [alternative_browser]
// Opens page in default browser or another browser if specified
```

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-16 13:33:25 +00:00
Darren Schroeder
cba3e100a0
fix rename when it is passed an empty column list to rename (#8086)
# Description

This PR fixes a bug that occurs if you pass `rename --column` and empty
list like `ls | rename -c []`.

## Before

```
> ls | rename -c []
thread 'main' panicked at 'index out of bounds: the len is 0 but the index is 0', crates\nu-command\src\filters\rename.rs:110:15
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```

## After

```
> ls | rename -c []
Error: nu:🐚:type_mismatch (link)

  × Type mismatch.
   ╭─[entry #1:1:1]
 1 │ ls | rename -c []
   ·                ─┬
   ·                 ╰── The list cannot be empty and must contain only two values: the column's name and its replacement value
   ╰────
```

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-15 21:47:27 +00:00
Darren Schroeder
d5ce509e3a
move ast command to the debug group (#8077)
# Description

This PR tweaks how `ast` works a tiny bit by outputting values in stead
of eprintln!'s. It also moves the `ast` command into the folder with the
rest of the debug commands and changes the category to debug.

I started adding some tests but couldn't figure out a good way to do it
since every `ast` command contains spans that will be different on each
invocation.

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-14 18:47:34 +00:00
Michael Angerman
2f10d19c98
remove spurious use from default_context.rs (#8073)
For some reason this "Use" in default_context.rs was in the code,
but it is not being "used" --- pun intended...
2023-02-13 20:14:20 +00:00
Darren Schroeder
4c787af26d
relocate debug commands (#8071)
# Description

Now that we've landed the debug commands we were working on, let's
relocate them to an easier place to find all of them. That's what this
PR does.

The only actual code change was changing the `timeit` command to a
`Category::Debug` command. The rest is just moving things around and
hooking them up.

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-13 16:39:07 +00:00
WindSoilder
208ffdc1da
Move some from xxx commands to plugin (#7942)
# Description

From nushell 0.8 philosophy:
https://github.com/nushell/nushell.github.io/blob/main/contributor-book/philosophy_0_80.md#core-categories

> The following categories should be moved to plugins:
Uncommon format support

So this pr is trying to move following commands to plugin:
- [X] from eml
- [x] from ics
- [x] from ini
- [x] from vcf

And we can have a new plugin handles for these formatting, currently
it's implemented here:

https://github.com/WindSoilder/nu_plugin_format

The command usage should be the same to original command.

If it's ok, the plugin can support more formats like
[parquet](https://github.com/fdncred/nu_plugin_from_parquet), or [EDN
format](https://github.com/nushell/nushell/issues/6415), or something
else.

Just create a draft pr to show what's the blueprint looks like, and is
it a good direction to move forward?

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-13 12:42:08 +00:00
Ryan Devenney
072d2a919d
#8027 Hide implementation details in invalid cd call (#8049)
# Description

[GH issue](https://github.com/nushell/nushell/issues/8027)

The current error message for a cd command includes a Debug output of
the `io::Error` being returned from `canonicalize_with`, so it's been
replaced with a more user friendly and readable depiction of the error.

# User-Facing Changes

As described in the issue, I've changed the error message for a cd into
a directory that does not exist from:
```
/home/rdevenney/projects/open_source/nushell〉cd asdfasdf                                                                               02/11/2023 08:59:59 PM
Error: nu:🐚:directory_not_found (link)

 × Directory not found
   ╭─[entry #2:1:1]
 1 │ cd asdfasdf
   ·    ────┬───
   ·        ╰── directory not found
   ╰────
  help: IO Error: Os { code: 2, kind: NotFound, message: "No such file or directory" }
```
To:
```
/home/rdevenney/projects/open_source/nushell〉cd asdfasdf                                                                               02/11/2023 08:58:38 PM
Error: nu:🐚:directory_not_found (link)

  × Directory not found
   ╭─[entry #1:1:1]
 1 │ cd asdfasdf
   ·    ────┬───
   ·        ╰── directory not found
   ╰────
  help: IO Error: DirectoryNotFound
```
# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
2023-02-13 02:24:48 +00:00
Maxim Zhiburt
ccbdc9f6d8
nu-table/ Fix table --expand issue when table with no header involved (#8045)
close #8029

---------

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
2023-02-12 23:28:42 +00:00
Jakub Žádník
b0775b3f1e
Fix hidden env vars not being hidden in closures (#8055)
# Description

This one fixes env not being hidden inside closure, reported in the
conversation under https://github.com/nushell/nushell/issues/6593

https://github.com/nushell/nushell/issues/6593
https://github.com/nushell/nushell/issues/7937 still persist. These
seems a bit more involved and might need hidden env tracking also in the
engine state... I'm not yet sure what's causing it.

Also re-enables some env-related tests and removes unused Value clone.

# User-Facing Changes

Just a bugfix

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-12 17:48:51 +00:00
Bob Hyman
2894668b3e
Improve error when regex rejects pattern. Resolution of #8037 (#8050)
# Description

Improve error when `str replace <pattern>` detects a problem with
<pattern>.

# User-Facing Changes

New "Incorrect value" error:
```
〉 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
Error: nu:🐚:incorrect_value (link)

  × Incorrect value.
   ╭─[entry #1:1:1]
 1 │  'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
   ·                                   ─────┬────
   ·                                        ╰── Regex error: Parsing error at position 4: Invalid hex escape
   ╰────
```

We could fruitfully replace some of the current uses of
`ShellError::UnsupportedInput` with this error. 'Incorrect value' is
different from 'wrong type'

# Tests + Formatting

Don't forget to add tests that cover your changes.
* none added / changed.

Make sure you've run and fixed any issues with these commands:

- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-12 13:25:40 +00:00
Darren Schroeder
9777d755d5
add benchmark to deprecated commands (#8046)
# Description

This PR adds a deprecated message to the `benchmark` command.
```
> benchmark
Error: nu:🐚:deprecated_command (link)

  × Deprecated command benchmark
   ╭─[entry #1:1:1]
 1 │ benchmark
   · ────┬────
   ·     ╰── 'benchmark' is deprecated. Please use 'timeit' instead.
   ╰────
```

# User-Facing Changes

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-11 21:39:55 +00:00
Jakub Žádník
58529aa0b2
Benchmark each pipeline element (#7854)
# Description

Adds a `profile` command that profiles each pipeline element of a block
and can also recursively step into child blocks.

# Limitations
* It is implemented using pipeline metadata which currently get lost in
some circumstances (e.g.,
https://github.com/nushell/nushell/issues/4501). This means that the
profiler will lose data coming from subexpressions. This issue will
hopefully be solved in the future.
* It also does not step into individual loop iteration which I'm not
sure why but maybe that's a good thing.

# User-Facing Changes

Shouldn't change any existing behavior.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2023-02-11 21:35:48 +00:00
Darren Schroeder
0780300fb3
add a new inspect command for more debugging (#8028)
# Description

The purpose of this command is to help to debug pipelines. It works by
allowing you to inject the `inspect` command into a pipeline at any
point. Then it shows you what the input description is and what the
input values are that are passed into `inspect`. With each step it
prints this information out while also passing the value information on
to the next step in the pipeline.


![image](https://user-images.githubusercontent.com/343840/218154064-e107859b-d0da-41c6-8e34-2d717639b81c.png)

This command is kind of a "hack job" because it clones maybe too much
and I had to get creative in order to output two different tables. I'm
sure there are many ways this can be improved or combined into other
commands but I wanted to start here. Note that the `inspect` output is
written to stderr and the normal nushell output is written to stdout. If
we were to output both to stdout, nushell would get confused.

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-11 18:59:11 +00:00
Darren Schroeder
b9106b633b
rename benchmark to time (#8018)
# Description

This PR renames the `benchmark` command to the `time` command.

# User-Facing Changes

new command name

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-11 18:57:48 +00:00
Darren Schroeder
f4bd78b86d
Make metadata a Category::Debug command (#8019)
# Description

This PR changes the `metadata` command to a `Category::Debug` command
for better organization.

# User-Facing Changes

Just a different category.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-10 08:09:21 -06:00
Darren Schroeder
00601f1835
A fill command to replace str lpad and str rpad (#7846)
# Description

The point of this command is to allow you to be able to format ints,
floats, filesizes, and strings with an alignment, padding, and a fill
character, as strings. It's meant to take the place of `str lpad` and
`str rpad`.

```
> help fill
Fill and Align

Search terms: display, render, format, pad, align

Usage:
  > fill {flags}

Flags:
  -h, --help - Display the help message for this command
  -w, --width <Int> - The width of the output. Defaults to 1
  -a, --alignment <String> - The alignment of the output. Defaults to Left (Left(l), Right(r), Center(c/m), MiddleRight(cr/mr))
  -c, --character <String> - The character to fill with. Defaults to ' ' (space)

Signatures:
  <number> | fill -> <string>
  <string> | fill -> <string>

Examples:
  Fill a string on the left side to a width of 15 with the character '─'
  > 'nushell' | fill -a l -c '─' -w 15

  Fill a string on the right side to a width of 15 with the character '─'
  > 'nushell' | fill -a r -c '─' -w 15

  Fill a string on both sides to a width of 15 with the character '─'
  > 'nushell' | fill -a m -c '─' -w 15

  Fill a number on the left side to a width of 5 with the character '0'
  > 1 | fill --alignment right --character 0 --width 5

  Fill a filesize on the left side to a width of 5 with the character '0'
  > 1kib | fill --alignment middle --character 0 --width 10
```

![image](https://user-images.githubusercontent.com/343840/214133752-6fc93fa7-4003-4eb4-96ed-cd967312e244.png)

# User-Facing Changes

Deprecated `str lpad` and `str rpad`.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-09 14:56:52 -06:00
Darren Schroeder
c31225fdcf
explain command (#7957)
# Description

The purpose of this PR is to introduce the `inspect` command. A command
that is used to inspect, but not run, a pipeline to ensure everything
looks right. This is meant as a debugging tool. This is some hackery, so
don't laugh. :)

![image](https://user-images.githubusercontent.com/343840/217896776-99c6bece-172c-4d3d-8cec-dda85d37cada.png)
2023-02-09 13:59:38 -06:00
Artemiy
99aea0c71c
Filesystem commands print --verbose to stderr (#8014)
# Description

Makes `mkdir`, `cp`, `mv` and `rm` return nothing and print info to
stderr:

![image](https://user-images.githubusercontent.com/17511668/217859228-feffa4bc-c22d-45d3-b330-1903f5a4d938.png)
See https://github.com/nushell/nushell/pull/7925#issuecomment-1420861638
and
[discord](https://discord.com/channels/601130461678272522/615329862395101194/1072523941865857055).

# User-Facing Changes

`mkdir`, `cp`, `mv` and `rm` will return nothing and print info to
stderr with `--verbose` flag.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-09 10:29:34 -08:00
Darren Schroeder
023e244958
view span & view files commands (#7989)
# Description

This PR does the following:
1. Adds a new command called `view span` - which shows what is at the
location of the span parameters
2. Adds a new command called `view` - which just lists all the `view`
commands.
3. Renames `view-source` to `view source`.
4. Adds a new command called `view files` - which shows you what files
are loaded into nushell's EngineState memory.
5. Added a `Category::Debug` and put these commands (and others) into
it. (`inspect` needs to be added to it, but it's not landed yet)

Spans are important to nushell. One of their uses is to show where
errors are. For instance, in this example, the leader lines pointing to
parts of the command line are able to point to `10`, `/`, and `"bob"`
because each of those items have a span.
```
> 10 / "bob"
Error: nu::parser::unsupported_operation (link)

  × Types mismatched for operation.
   ╭─[entry #8:1:1]
 1 │ 10 / "bob"
   · ─┬ ┬ ──┬──
   ·  │ │   ╰── string
   ·  │ ╰── doesn't support these values.
   ·  ╰── int
   ╰────
  help: Change int or string to be the right types and try again.
```


# Examples

## view span
Example:
```
> $env.config | get keybindings | first | debug -r
... bunch of stuff
                    span: Span {
                        start: 68065,
                        end: 68090,
                    },
                },
            ],
            span: Span {
                start: 68050,
                end: 68101,
            },
        },
    ],
    span: Span {
        start: 67927,
        end: 68108,
    },
}
```
To view the last span:
```
> view span 67927 68108 
{
        name: clear_everything
        modifier: control
        keycode: char_l
        mode: emacs
        event: [
            { send: clearscrollback }
        ]
    }
```
> To view the 2nd to last span:
```
view span 68065 68090
{ send: clearscrollback }
```
> To view the 3rd to last span:
```
view span 68050 68101
[
            { send: clearscrollback }
        ]
```

## view files
```
> view files  
╭────┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│  # │                       filename                        │ start  │  end   │ size  │
├────┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│  0 │ source                                                │      0 │      2 │     2 │
│  1 │ Host Environment Variables                            │      2 │   6034 │  6032 │
│  2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │   6034 │  31236 │ 25202 │
│  3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu    │  31236 │  44961 │ 13725 │
│  4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │  44961 │  76134 │ 31173 │
│  5 │ defs.nu                                               │  76134 │  91944 │ 15810 │
│  6 │ prompt\oh-my.nu                                       │  91944 │ 111523 │ 19579 │
│  7 │ weather\get-weather.nu                                │ 111523 │ 125556 │ 14033 │
│  8 │ .zoxide.nu                                            │ 125556 │ 127504 │  1948 │
│  9 │ source                                                │ 127504 │ 127561 │    57 │
│ 10 │ entry #1                                              │ 127561 │ 127585 │    24 │
│ 11 │ entry #2                                              │ 127585 │ 127595 │    10 │
╰────┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
`entry #x` will be each command you type in the repl (i think). so, it
may be good to filter those out sometimes.
```
> view files | where filename !~ entry
╭───┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │                       filename                        │ start  │  end   │ size  │
├───┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source                                                │      0 │      2 │     2 │
│ 1 │ Host Environment Variables                            │      2 │   6034 │  6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │   6034 │  31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu    │  31236 │  44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │  44961 │  76134 │ 31173 │
│ 5 │ defs.nu                                               │  76134 │  91944 │ 15810 │
│ 6 │ prompt\oh-my.nu                                       │  91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu                                │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu                                            │ 125556 │ 127504 │  1948 │
│ 9 │ source                                                │ 127504 │ 127561 │    57 │
╰───┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
# User-Facing Changes

I renamed `view-source` to `view source` just to make a group of
commands. No functionality has changed in `view source`.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-09 11:35:23 -06:00
NitinL
659d890ecf
Added fix for #7981 - Replaced crate serde_ini with rust-ini for package nu-command/from (#8009)
# Description

Added fix for #7981 - Replaced crate serde_ini with rust-ini for package
nu-command/from

# Tests + Formatting

Added a test to support addition of the rust-ini crate.

`cargo test --package nu-command --lib -- formats::from::ini::tests
--nocapture`

Executed all tests.

`cargo test --workspace`

---------

Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
2023-02-09 12:47:45 +01:00
pwygab
8e9ed14b89
allow parse to work better with streams (#7870)
# Description

Fixes #7864. Haven't removed redundant code yet; and there's also a
weird visual bug, but I'm not sure if that's the fault of this PR or
just a quirk of how tabling works:

```
/home/gabriel/CodingProjects/nushell〉ping 1.1.1.1 | parse -r '(?P<num>\d+) ttl'                                                                                        01/27/2023 11:28:31 AM
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 0 │ 1   │
│ 1 │ 2   │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 2 │ 3   │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 3 │ 4   │
│ 4 │ 5   │
╰───┴─────╯
╭───┬─────╮
│ # │ num │
├───┼─────┤
│ 5 │ 6   │
│ 6 │ 7   │
╰───┴─────╯
^C
/home/gabriel/CodingProjects/nushell〉                                                                                                                                  01/27/2023 11:28:59 AM

```

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-08 20:59:02 -06:00
WindSoilder
055edd886d
Make plugin commands support examples. (#7984)
# Description

As title, we can't provide examples for plugin commands, this pr would
make it possible


# User-Facing Changes

Take plugin `nu-example-1` as example:
```
❯ nu-example-1 -h
PluginSignature test 1 for plugin. Returns Value::Nothing

Usage:
  > nu-example-1 {flags} <a> <b> (opt) ...(rest)

Flags:
  -h, --help - Display the help message for this command
  -f, --flag - a flag for the signature
  -n, --named <String> - named string

Parameters:
  a <int>: required integer value
  b <string>: required string value
  (optional) opt <int>: Optional number
  ...rest <string>: rest value string

Examples:
  running example with an int value and string value
  > nu-example-1 3 bb
```

The examples session is newly added.

## Basic idea behind these changes
when nushell query plugin signatures, plugin just returns it's signature
without any examples, so nushell have no idea about the examples of
plugin commands.
To adding the feature, we just making plugin returns it's signature with
examples.

Before:
```
        1. get signature
         ----------------> 
Nushell ------------------  Plugin
        <-----------------
        2. returns Vec<Signature>
```

After:
```
        1. get signature
        ----------------> 
Nushell ------------------  Plugin
        <-----------------
        2. returns Vec<PluginSignature>
```
        
When writing plugin signature to $nu.plugin-path:
Serialize `<PluginSignature>` rather than `<Signature>`, which would
enable us to serialize examples to `$nu.plugin-path`

## Shortcoming
It's a breaking changes because `Plugin::signature` is changed, and it
requires plugin authors to change their code for new signatures.

Fortunally it should be easy to change, for rust based plugin, we just
need to make a global replace from word `Signature` to word
`PluginSignature` in their plugin project.

Our content of plugin-path is really large, if one plugin have many
examples, it'd results to larger body of $nu.plugin-path, which is not
really scale. A solution would be save register information in other
binary formats rather than `json`. But I think it'd be another story.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-08 16:14:18 -06:00
Darren Schroeder
5e70d4121a
Add dfr to dataframe cmds (#7998)
# Description

This PR tries to resolve the overloading issue by going back to our
original naming convention for dataframes. So, this PR renames all
dataframe commands with a prefix of `dfr`. Some commands like `open-df`
were renamed to `dfr open` and things like `into df` were renamed `dfr
into-df`. I'm sure we can optimize naming a bit, but it seems to compile
now.

# User-Facing Changes

All dataframe commands are prefixed with dfr.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-08 15:52:57 -06:00
Maxim Zhiburt
6e6ef862c5
Address #7997 (#8000)
Hi there,

The case which was presented must be addressed.

But I did not test it properly...
I'd encourage you to do so.

Take care.

---------

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
2023-02-07 20:01:31 -06:00
Jérémy Audiger
a7fdca05c6
http: add --insecure flag to http get, share common code (#7992)
# Description

I factorized the HTTP client from HTTP Post and HTTP Get into a common
file, in order to reduce the code duplication. This PR has to be looked
commit by commit.

# User-Facing Changes

A new option has been to HTTP Get: `--insecure`. This option was already
available for HTTP Post command.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-07 14:22:19 -08:00
Reilly Wood
a562f492e3
Windows: handle illegal filenames a little better (#7999)
This PR is an incremental improvement to `ls` when it encounters
'illegal' file paths on Windows. Related:
https://github.com/nushell/nushell/issues/7869

## Context

We have trouble with filenames that Windows doesn't like, for example
[files with a `.` at the end of their
name](https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions).
To make a long story short, the Rust stdlib and several Win32 APIs will
choke if asked to do something with an illegal filepath. This is a
problem because files with illegal names can be created via other means
(like `touch foo.` in MINGW bash).

Previously `ls` would fail completely in a directory with a bad file,
which isn't great. After this PR, bad files get included in `ls` results
but without any metadata columns. This is not quite where we want to be
— eventually we want to be able to display file metadata for _all_ files
(even naughty ones) — but it's an improvement on the status quo.

### Before


![image](https://user-images.githubusercontent.com/26268125/217340906-26afd6d3-0ec3-454f-bed4-2bfcc9cf3a2f.png)

### After


![image](https://user-images.githubusercontent.com/26268125/217344373-6b81cc39-50b8-4390-8061-3e570502a784.png)

## Future work

Try the workarounds @ChrisDenton suggested:
https://github.com/nushell/nushell/issues/7869#issuecomment-1405977221

Some info on verbatim paths:
https://users.rust-lang.org/t/understanding-windows-paths/58583

## Testing

I tried to write a test for this, but it looks like our testing sandbox
can't create files with illegal filenames.😔 Here's the code in case it
proves useful someday:

```rust
/// Windows doesn't like certain file names, like file names ending with a period:
/// https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions
/// However, those files can still be created with tools like MINGW bash.
/// We may not be able to get full metadata for those files, but we should test that we can at least include them in ls results
#[test]
#[cfg(windows)]
fn can_list_illegal_files() {
    Playground::setup("ls_test_all_columns", |dirs, sandbox| {
        sandbox.with_files(vec![
            EmptyFile("foo"),
            EmptyFile("bar."),
            EmptyFile("baz"),
        ]);

        let actual = nu!(
            cwd: dirs.test(),
            "ls | length"
        );
        assert_eq!(actual.out, "3");

        let actual = nu!(
            cwd: dirs.test(),
            "ls"
        );
        assert_eq!(actual.out, "1");

        let actual = nu!(
            cwd: dirs.test(),
            "ls | where {|f| $f.name | str ends-with 'bar.'} | length"
        );
        assert_eq!(actual.out, "1");
    })
}
```
2023-02-07 12:30:37 -08:00
Amirhossein Akhlaghpour
67d1249b2b
Validate input range of du flags (#7962)
# Description
Fix #7953
Fix flags on `du` which should be positive and added some tests. 

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-06 21:34:32 +01:00
Darren Schroeder
66e5e42fb1
report which datetime couldn't be converted (#7980)
# Description

This PR will help report a bad date that can't be converted where the
error message says `* Unable to parse datetime`. This is helpful when
you're converting a big table and it fails somewhere that you really
can't see. I put it in `[]` so that when it's null, you can see that
there should be something there.

Before:
```
> 'Tue 1 0' | into datetime 
Error: nu:🐚:datetime_parse_error (link)

  × Unable to parse datetime
   ╭─[entry #1:1:1]
 1 │ 'Tue 1 0' | into datetime
   · ────┬────
   ·     ╰── datetime parsing failed
   ╰────
  help: Examples of supported inputs:
         * "5 pm"
         * "2020/12/4"
         * "2020.12.04 22:10 +2"
         * "2020-04-12 22:10:57 +02:00"
         * "2020-04-12T22:10:57.213231+02:00"
         * "Tue, 1 Jul 2003 10:52:37 +0200"
```
After:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)

  × Unable to parse datetime: [Tue 1 0].
   ╭─[entry #4:1:1]
 1 │ 'Tue 1 0' | into datetime
   · ────┬────
   ·     ╰── datetime parsing failed
   ╰────
  help: Examples of supported inputs:
         * "5 pm"
         * "2020/12/4"
         * "2020.12.04 22:10 +2"
         * "2020-04-12 22:10:57 +02:00"
         * "2020-04-12T22:10:57.213231+02:00"
         * "Tue, 1 Jul 2003 10:52:37 +0200"
```

# User-Facing Changes

New format for the error message.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-06 14:17:07 -06:00
Nitin Londhe
1f01b6438f
Added fix for #7970 - Upgraded toml crate version from version from 0.5.8 to 0.7.1 for package nu-command (#7990)
# Description

Added fix for #7970 - Upgraded toml crate version from version from
0.5.8 to 0.7.1 for package nu-command

# Tests + Formatting

Added two tests to support the toml upgrade.

- `cargo test --package nu-command --lib -- formats::from::toml::tests
--nocapture`

Executed all tests.

- `cargo test --workspace`

---------

Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
2023-02-06 14:15:14 -06:00
Jérémy Audiger
bea7ec33c1
Update few examples of math commands (#7987)
# Description

I just updated a few examples linked to math commands.

I used the character of pi where possible, and I updated one example
since the example was misleading IMO (for the tau command).

# User-Facing Changes

Only examples have been updated, there is no real user changes.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-06 13:43:00 +01:00
Stefan Holderbach
4c308b7f2f
Fix def-env docs according to docs#761 (#7972)
See nushell/nushell.github.io#761

# User-Facing Changes

Docs reflect up-to-date reality

Co-authored-by: Canop <cano.petrole@gmail.com>
2023-02-06 11:00:44 +01:00
Jakub Žádník
e8d930f659
Reorder help <keyword> priority (#7929)
# Description

`help <keyword>` will now search for `<keyword>` in aliases first, then
commands. This matches the way the parser resolves aliases before
commands.

# User-Facing Changes

Not significant
2023-02-05 23:51:09 +01:00
Amirhossein Akhlaghpour
aef88aa03e
Load env pwd (#7963)
# Description

Fixes #7940
avoid `load-env` to change PWD 

# User-Facing Changes

`{"PWD": whatever} | load-env` now fails
2023-02-05 23:40:46 +01:00
Jérémy Audiger
99076af18b
Use imported names in Command::run signatures (#7967)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

I opened this PR to unify the run command method. It's mainly to improve
consistency across the tree.

# User-Facing Changes

None.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-05 22:17:46 +01:00
Grzegorz Caban
a0e3ad2b70
return in reduce command closure (#7961)
# Description

Fix for #7933. I've read through code and found the obvious difference
between them, where `each` command calls eval_with_early_return
e89e734ca2/crates/nu-command/src/filters/each.rs (L158),
while `reduce` command uses eval_block
e89e734ca2/crates/nu-command/src/filters/reduce.rs (L143)

That simple change seems to resolve the problem. 

# User-Facing Changes

Allows the use of `return` in reduce closures, as per example in #7933
description. Arguably it's restoring consistency, than changing user
interface.

```
[1, 2] | reduce --fold null { |it, state|                                                           
::: if $it == 1 {
:::     return 10
::: }
::: return ($it * $state)
::: }
20
```

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

    

- [x] `cargo fmt --all -- --check` to check standard code formatting
(cargo fmt --all applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x]  `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-04 16:41:54 -06:00
Leon
9945241b77
Remove deprecated --numbered flag from four commands (#7777)
# Description

Remove `--numbered` from ~~`for`~~, `each`, `par-each`, `reduce` and
`each while`. These all provide indexes (numbering) via the optional
second param to their closures.

EDIT: Closes #6986.

# User-Facing Changes

Every command that had `--numbered` listed as "deprecated" in their help
docs is affected.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2023-02-02 16:59:58 -06:00
Darren Schroeder
babc7d3baf
clean up the registry query output (#7939)
# Description

This cleans up the `registry query` output so that it's more usable.

Before:

![image](https://user-images.githubusercontent.com/343840/216129871-7cadcb68-a289-4e29-8857-6fc20b6a57f7.png)

After:

![image](https://user-images.githubusercontent.com/343840/216129814-70021706-f58a-4647-b5f1-a0e30f5fae16.png)


# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 07:10:38 -06:00
WindSoilder
8f4807020f
make do -i works with liststream (#7889)
# Description

Fixes: #7874 

It's because `do -i` doesn't handles `Pipeline::ListStream`
data(especially there is Value::Error inside the stream)

To fix it, we need to iterate through `ListStream`, check if there is
`Value::Error`. If so, just returns `Pipeline::empty()`

# User-Facing Changes

```
help commands | find arg | get search_terms | do -i { ansi strip }
```

No longer raises error.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 00:04:53 +01:00
Kornél Csernai
31e1410191
respect use_ansi_coloring configuration (#7912)
# Description

Use the `use_ansi_coloring` configuration point to decide whether the
output will have colors, where possible.

Related: https://github.com/nushell/nushell/issues/7676


![image](https://user-images.githubusercontent.com/749306/215435128-cbf5f4b8-aafa-4718-bf23-3f0fd19b63ba.png)

- [x] `grid -c`
- [x] `perf()`

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 00:03:05 +01:00
pwygab
24d7227e27
ensure that when nu evaluates files, it allows early returns (#7415)
# Description

Fixes #7301.

# User-Facing Changes

`return` can now be used in scripts without explicit `def main`.

# Tests + Formatting

Don't forget to add tests that cover your changes. (I'm not sure how to
test this.)

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 00:02:27 +01:00
Amirhossein Akhlaghpour
c130ca1bc6
Fix: dst error on cp command (#7895)
Fixes #7693 

On `cp` commands there were two error which pass error message with
invalid detail about source and destination files . there error were for
Not exist file and Permission denied .

Examples:
  Before :
Copy `source_file_valid` to `destination_invalid_dir` throw this error ;
`copy file "/source_file_valid" failed: No such file or directory (os
error 2) `

 After this PR it will throw this if destination will be invalid :
`copying to destination "/destination_invalid_dir" failed: No such file
or directory (os error 2) `

it was for Permission denied too .

---------

Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
2023-02-01 21:48:21 +01:00
Darren Schroeder
d13ce2aec9
add ability to view-source on closures (#7935)
closes https://github.com/nushell/nushell/issues/7934
2023-02-01 20:48:27 +02:00
Jakub Žádník
517ef7cde7
Remove deprecated where -b parameter (#7927) 2023-01-31 21:05:28 +02:00
Stefan Holderbach
1ea39abcff
Apply more recent/nightly clippy lints (#7916)
# Description

- Use inline format strings in dataframe code
- Fix manual `.is_ascii_digit()` check
- Remove unnecessary `.into_iter()` calls
2023-01-30 14:06:36 +01:00
Stefan Holderbach
ab480856a5
Use variable names directly in the format strings (#7906)
# Description

Lint: `clippy::uninlined_format_args`

More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)

Alternative to #7865

# User-Facing Changes

None intended

# Tests + Formatting

(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
2023-01-29 19:37:54 -06:00
JT
421bc828ef
Use clippy-recommended simplification (#7904)
# Description

Just a couple clippy-recommended simplifications.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-01-29 23:31:35 +01:00