Fixes#7342. `0..1000 | table` before this change:
`0..1000 | table` after this change:
When piping data to `table`, pages were not getting a newline at the
end[^1]. This problem was uncovered and exacerbated by the new
`display_output` hook which implicitly piped _everything_ to `table`.
## The Fix
`PagingTableCreator` now adds a newline to each page instead of relying
on later code to do it.
## Tests
I spent a while trying to write a regression test for this behaviour but
I couldn't get the test to fail before my fix! I think the test
infrastructure does something special with newlines when it's checking
command output. I eventually ran out of steam trying to investigate
that, sorry.
[^1]: unless the pipe to table was the implicit one that's done when
there is no `display_output` hook set. That situation was still working
OK.
Change in `mkdir` `-s` flag to `-v` to be similar to other commands
# Description
Other commands like `rm`, `mv`, `cp` have a `-v` (`--verbose`) flag.
`mkdir` has a `-s` (`--show-created-paths`), but should be consistent
with other commands.
# User-Facing Changes
- flag `-s` replaced by `-v` in `mkdir` command.
# Tests + Formatting
```
> mkdir -v new_dir
╭───┬───────────────────────────────────╮
│ 0 │ C:\Users\ricardo.monteiro\new_dir │
╰───┴───────────────────────────────────╯
```
# Description
add input_output_types() to benchmark, cd and config reset commands
It's an update to https://github.com/nushell/nushell/issues/7320
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Reverts nushell/nushell#7448
Some surprising behavior in how we do this. For example:
```
〉if (true || false) { print "yes!" } else { print "no!" }
no!
〉if (true or false) { print "yes!" } else { print "no!" }
yes!
```
This means for folks who are using the old `||`, they possibly get the
wrong answer once they upgrade. I don't think we can ship with that as
it will catch too many people by surprise and just make it easier to
write buggy code.
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We got some feedback from folks used to other shells that `try/catch`
isn't quite as convenient as things like `||`. This PR adds `&&` as a
synonym for `;` and `||` as equivalent to what `try/catch` would do.
# User-Facing Changes
Adds `&&` and `||` pipeline operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7216
Adds `interact-once` switch which numbers out the number of files to
delete and asks the user for confirmation.
```
/home/gabriel/test〉ls 12/11/2022 11:25:42 AM
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ a.txt │ file │ 0 B │ now │
│ 1 │ b.txt │ file │ 0 B │ now │
│ 2 │ c.txt │ file │ 0 B │ now │
╰───┴───────┴──────┴──────┴──────────╯
/home/gabriel/test〉rm *.txt -I 12/11/2022 11:25:42 AM
rm: remove 3 files? : y
/home/gabriel/test〉ls 12/11/2022 11:25:51 AM
/home/gabriel/test〉 12/11/2022 11:25:54 AM
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7404Fixes: #7402
## About change
In `eval_block`, all pipelines(or called statements?) result will be
printed except the last one, the last one is returned by `eval_block`
function.
So if we want to print the last statement in eval block, we just need to
print that value.
# User-Facing Changes
### for
```
❯ for _ in 1..2 { echo "a" }
a
a
```
### while
```
❯ mut x = 1; while $x < 3 { $x = $x + 1; echo bb; }
bb
bb
```
### loop
```
❯ mut total = 0; loop {
∙ if $total > 1 {
∙ break
∙ } else {
∙ $total += 1
∙ }
∙ echo 3
∙ }
3
3
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The message arrow is altered to show the external command name in case
it wasn't obvious. (See example for an occasion where it is
non-obvious).
BEFORE:
```
〉else if (2mb) > 4mb
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #35:1:1]
1 │ else if (2mb) > 4mb
· ─┬
· ╰── Cannot convert filesize to a string
╰────
help: All arguments to an external command need to be string-compatible
```
AFTER:
```
〉else if (2mb) > 4mb
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #3:1:1]
1 │ else if (2mb) > 4mb
· ─┬
· ╰── Cannot convert filesize to a string argument for 'else'
╰────
help: All arguments to an external command need to be string-compatible
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR changes some commands that previously accepted row conditions
(like `$it > 5`) as parameter to accept closures instead. The reasons
are:
a) The commands would need to move into parser keywords in the future
while they feel more like commands to be implemented in Nushell code as
a part of standard library.
b) In scripts, it is useful to store the predicate condition in a
variable which you can't do with row conditions.
c) These commands are not used that often to benefit enough from the
shorter row condition syntax
# User-Facing Changes
The following commands now accept **closure** instead of a **row
condition**:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
This is a part of an effort to move away from shape-directed parsing.
Related PR: https://github.com/nushell/nushell/pull/7365
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Changes the `FILE_PWD` setting mechanism to match the one used in the
`use` command.
Fixes https://github.com/nushell/nushell/pull/7424
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR moves the `where` command to a parser keyword. While it still
uses the shape-directed parsing dictated by the signature, we're free to
change the parsing code now to a custom one once we remove the syntax
shapes.
As a side effect, the `where -b` flag was removed and its functionality
has moved to the new `filter` command.
Just FYI, other commands that take row conditions:
- `take until`
- `take while`
- `skip until`
- `skip while`
- `any`
- `all`
We can either move these to the parser as well or make them accept a
closure instead of row condition.
# User-Facing Changes
New `filter` command which replaces `where -b` functionality.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7389
Make split row works more like python or rust, especially, when the
input string stars/ends with separator, append a empty string to result.
Here are examples:
python:
```python
In [6]: "\nasdf\nghi\n".split("\n")
Out[6]: ['', 'asdf', 'ghi', '']
```
rust:
```rust
fn main() {
let x = "\nabc\ndef\n";
let y = x.split("\n").collect::<Vec<&str>>();
println!("{:?}", y); // outputs: ["", "abc", "def", ""]
}
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Address part of feature request #7337, add a small command `into
cellpath` to allow string -> cellpath auto-conversion, with this change,
we could run
```
let p = 'ls.use_ls_colors'
$env.config | upsert ($p | nito cellpath) false
```
<img width="710" alt="image"
src="https://user-images.githubusercontent.com/85712372/206782818-3024b34f-150b-482d-aebc-9426ef6a1cf9.png">
Note - This pr only covers `String` -> `CellPath`, any other conversions
should be considered as expected?
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When `seq date` was changed to remove the `-s` param, the example was
missed. This PR removes that example.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
val: a,
span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Adds new command `math log` that takes as a required positional argument
a base.
Specialized for `math log 2` and `math log 10` for better performance
and precision that matches the expectations there. This leads to
discontinuities in numerical error but should make a better trade-off
for common usecases.
Example testing of the happy path
# Description
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Ooops, fix the input redirection logic so we don't break vim.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
fixes#7384
This is a stop-gap fix until we remove type-directed parsing. With this,
you can create a `OneOf` shape that can be one of a list of syntax
shapes. This gives you a little more control than you get with `Any`,
allowing you to add `Block` without breaking other parsing rules.
# User-Facing Changes
`else` block will no longer capture variables as it will now use a block
instead of a closure.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fix changes pipelines to allow them to actually be empty. Mapping
over empty pipelines gives empty pipelines. Empty pipelines immediately
return `None` when iterated.
This removes a some of where `Span::new(0, 0)` was coming from, though
there are other cases where we still use it.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix semicolon working for the following commands which runs to failed:
1. into record (example: `into record; echo 'aa'`) -- the final aa
shouldn't be printed
2. save ( example: `touch a; chmod a-w a; echo 'aa' | save a; echo asdf`
) -- the final asdf shouldn't be printed
3. fetch ( example: `touch a; chmod a-w a; fetch https://www.google.com
-o a; echo asdf` ) -- the final asdf shouldn't be printed
4. registry_query (I don't have window machine, sorry for that I can't
demo for it)
I've reviewed most of built-in commands, and it seems that other
commands works fine.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Title.
# User-Facing Changes
Faster seq that works better with functions that take in `ListStream`s.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
The block+closure split broke `watch` for some use cases. Fixed.
We should eventually add some tests for `watch` but it's a little tricky
since it's an interactive command.
Closes#7362.
# Description
Try to fix#7347, this pr does not fix the error message to `upserting
beyond 1 + the list's length doesn't work,`, I feel this is still not
explicit or general engouh, if we want to change, what would be the best
message to be printed out ?
Add tests too
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7110. ~~Note that unlike "real" `mut` vars, $env can be deeply
mutated via stuff like `$env.PYTHON_IO_ENCODING = utf8` or
`$env.config.history.max_size = 2000`. So, it's a slightly awkward
special case, arguably justifiable because of what $env represents (the
environment variables of your system, which is essentially "outside"
normal Nushell regulations).~~
EDIT: Now allows all `mut` vars to be deeply mutated using `=`, on
request.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
```rust
ToCsv
```
ToCsv was in there twice so I removed the 2nd reference...
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7278
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Add the input_output_types() to the ansi gradient command in support of
#7320
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This change makes SQLite queries (`open foo.db`, `open foo.db | query db
"select ..."`) cancellable using `ctrl+c`. Previously they were not
cancellable, which made it unpleasant to accidentally open a very large
database or run an unexpectedly slow query!
UX-wise there's not too much to show:
## Notes
I was hoping to make SQLite queries streamable as part of this work, but
I ran into 2 problems:
1. `rusqlite` lifetimes are nightmarishly complex and they make it hard
to create a `ListStream` iterator
2. The functions on Nu's `CustomValue` trait return `Value` not
`PipelineData` and so `CustomValue` implementations can't stream data
AFAICT.
# Description
Windows doesn't support the --signal(-s) option, so don't show the
example in help.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR changes the `schema` command for viewing the schema of a SQLite
database file. It removes 1 level of nesting (intended to handle
multiple databases in the same connection) that I believe is
unnecessary.
### Before
### After
## Rationale
A SQLite database connection can technically be associated with multiple
non-temporary databases using [the ATTACH DATABASE
command](https://www.sqlite.org/lang_attach.html). But it's not possible
to do that _in the context of Nushell_, and so I believe that there is
no benefit to displaying the schema as if there could be multiple
databases.
I initially raised this concern back in April, but we decided to keep
the database nesting because at the time we were still looking into more
generalized database functionality (i.e. not just SQLite). I believe
that rationale no longer applies.
Also, the existing code would not have worked correctly even if a
connection had multiple databases; for every database, it was looking up
tables without filtering them by database:
6295b20545/crates/nu-command/src/database/values/sqlite.rs (L104-L118)
## Future Work
I'd like to add information on views+triggers to the `schema` output.
I'm also working on making it possible to `ctrl+c` reading from a
database (which is turning into a massive yak shave).
# Description
This PR adds the ability to easily specific background colors using the
ansi command. It also allows you to use attributes.
I also updated the grid output to be clear that the output includes an
escape character, represented here by `\e`.
# User-Facing Changes
You can see a list of these new items with `ansi --list` with their long
and short names.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
# Description
Closes: #7208
After this pr, histogram will output by count descending
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* Various help messages were edited for clarity/grammar/etc.
* Some examples were made more interesting or relevant
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
* `$env.config.explore_config` renamed to `$env.config.explore`. This
follows the principle that config subrecords relating to single commands
(as this relates to `explore`) should be exactly named after the command
(see `ls`, `rm`, `table` etc.)
* In `into_config()`, moved the match arm relating to
`$env.config.explore` out of the "legacy options" section (which is
slated for removal in a later version).
# User-Facing Changes
`explore` is not in any public releases yet, so this has no end-user
impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The `where -b` flag was broken. The following now works:
```
let cond = {|x| $x.name !~ 'foo'}; ls | where -b $cond
```
This is just a quick fix. Ultimately, the `where` command shouldn't need
the flag and `where $cond` should work. The first step, however, is to
move `where` away from shape-directed parsing and make it a parser
keyword.
# User-Facing Changes
`where -b` is not broken
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Just some minor updates to xml deps
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes: #7298
So `try .. catch` works better on external command failed.
# User-Facing Changes
```
try {nu --testbin fail} catch {print "fail"}
```
After this pr, it will output "fail"
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
# Description
* `-n`, `--natural` flag from `sort-by` is now on the plain `sort`.
* The `-i`, `-n` and `-r` flags now work with single record sorting
(formerly they didn't)
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is one of many commands that needs the `input_output_types()` part
of the signature filled in so that `$nu.scope.commands` shows the
signature properly which leads to the documentation being updated
properly.
TIL that when commands like `cal` don't have Example tests that can
easily be expressed and require the use of `None` results that we need
to use this as part of the signature.
```rust
.allow_variants_without_examples(true) // TODO: supply exhaustive examples
```
Related to https://github.com/nushell/nushell/issues/7287
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #6920
# User-Facing Changes
```
❯ "asdf" | save dump.rdb
Error:
× Destination file already exists
╭─[entry #21:1:1]
1 │ "asdf" | save dump.rdb
· ────┬───
· ╰── Destination file '/tmp/dump.rdb' already exists
╰────
help: you can use -f, --force to force overwriting the destination
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#7257
This fixes an issue where dataframes would always try to convert
datetimes with milliseconds. Since the timeunit is passed in, I make use
of it and try to choose the appropriate divisor.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
I was thinking that it may be helpful to have a more verbose description
of our operators. Please let me know if you have better wording.
Also, while not strictly considered an operator, i added `not` to avoid
some confusion.
<img width="1574" alt="Screenshot 2022-11-28 at 7 57 30 PM"
src="https://user-images.githubusercontent.com/343840/204419666-7c4dbb43-26f5-4cd5-9a4e-a1555a9e700f.png">
# User-Facing Changes
Adds description column
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds a new command called `help operators`. The intention is to
make nushell's operators more discoverable.
Operations are evaluated in the precedence order (from highest to
lowest).
<img width="737" alt="Screenshot 2022-11-26 at 7 23 15 PM"
src="https://user-images.githubusercontent.com/343840/204115311-56765517-c36d-44d5-b303-43ffc0e980f6.png">
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This fixes the compilation problems with `aarch64-apple-darwin` on rust
1.64 as well as the `zstd` problems. We recently found out that `zstd`
pinned to 1.65.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
chrono version update
# Description
upgrade chrono to 0.4.23
# Major Changes
If you're considering making any major change to nushell, before
starting work on it, seek feedback from regular contributors and get
approval for the idea from the core team either on
[Discord](https://discordapp.com/invite/NtAbbGn) or [GitHub
issue](https://github.com/nushell/nushell/issues/new/choose).
Making sure we're all on board with the change saves everybody's time.
Thanks!
# Tests + Formatting
Make sure you've done the following, if applicable:
- Add tests that cover your changes (either in the command examples, the
crate/tests folder, or in the /tests folder)
- Try to think about corner cases and various ways how your changes
could break. Cover those in the tests
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
* Help us keep the docs up to date: If your PR affects the user
experience of Nushell (adding/removing a command, changing an
input/output type, etc.), make sure the changes are reflected in the
documentation (https://github.com/nushell/nushell.github.io) after the
PR is merged.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This command converts things into records.
<img width="466" alt="Screenshot 2022-11-24 at 2 10 54 PM"
src="https://user-images.githubusercontent.com/343840/203858104-0e4445da-9c37-4c7c-97ec-68ec3515bc4b.png">
<img width="716" alt="Screenshot 2022-11-24 at 5 04 11 PM"
src="https://user-images.githubusercontent.com/343840/203872621-48cab199-ba57-44fe-8f36-9e1469b9c4ef.png">
It also converts dates into record but I couldn't get the test harness
to accept an example.
Thanks to @WindSoilder for writing the "hard" parts of this. :)
_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
# Description
This makes the help messages cleaner for keyword-style arguments.
Before:
```
(optional) else_expression <Keyword([101, 108, 115, 101], Expression)>: expression or block to run if check fails
```
Now:
```
(optional) "else" + <expression>: expression or block to run if check fails
```
# User-Facing Changes
Changes how help is printed, so we use slightly different shape names
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR is a response to the issues raised in
https://github.com/nushell/nushell/pull/7087. It consists of two
changes:
* `export-env`, when evaluated in `overlay use`, will see the original
environment. Previously, it would see the environment from previous
overlay activation.
* Added a new `--reload` flag that reloads the overlay. Custom
definitions will be kept but the original definitions and environment
will be reloaded.
This enables a pattern when an overlay is supposed to shadow an existing
environment variable, such as `PROMPT_COMMAND`, but `overlay use` would
keep loading the value from the first activation. You can easily test it
by defining a module
```
module prompt {
export-env {
let-env PROMPT_COMMAND = (date now | into string)
}
}
```
Calling `overlay use prompt` for the first time changes the prompt to
the current time, however, subsequent calls of `overlay use` won't
change the time. That's because overlays, once activated, store their
state so they can be hidden and restored at later time. To force-reload
the environment, use the new flag: Calling `overlay use --reload prompt`
repeatedly now updates the prompt with the current time each time.
# User-Facing Changes
* When calling `overlay use`, if the module has an `export-env` block,
the block will see the environment as it is _before_ the overlay is
activated. Previously, it was _after_.
* A new `overlay use --reload` flag.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds `break`, `continue`, `return`, and `loop`.
* `break` - breaks out a loop
* `continue` - continues a loop at the next iteration
* `return` - early return from a function call
* `loop` - loop forever (until the loop hits a break)
Examples:
```
for i in 1..10 {
if $i == 5 {
continue
}
print $i
}
```
```
for i in 1..10 {
if $i == 5 {
break
}
print $i
}
```
```
def foo [x] {
if true {
return 2
}
$x
}
foo 100
```
```
loop { print "hello, forever" }
```
```
[1, 2, 3, 4, 5] | each {|x|
if $x > 3 { break }
$x
}
```
# User-Facing Changes
Adds the above commands.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
A small follow-up to #7221. This changes the `catch` block from a block
to a closure, so that it can access the error returned from the `try`
block. This helps with a common scenario: "the `try` block failed, and I
want to log why it failed."
### Example
### Future Work
Nu's closure syntax is a little awkward here; it might be nicer to allow
something like `catch err { print $err }`. We discussed this on Discord
and it will require special parser code similar to what's already done
for `for`.
I'm not feeling confident enough in my parser knowledge to make that
change; I will spend some more time looking at the `for` code but I
doubt I will be able to implement anything in the next few days.
Volunteers welcome.
# Description
This adds `try` (with an optional `catch` piece). Much like other
languages, `try` will try to run a block. If the block fails to run
successfully, the optional `catch` block will run if it is available.
# User-Facing Changes
This adds the `try` command.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is a set of fixes to `err>` to make it work a bit more predictably.
I've also revised the tests, which accidentally tested the wrong thing
for redirection, but should be more correct now.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
`uniq -i` does not convert output strings to lowercase.
Also, `uniq -i` did not ignore case in strings below the first level of
Tables and Records. Now all strings case are ignored for all children
Values for tables, Records, and List.
Fixes https://github.com/nushell/nushell/issues/7192
# Tests + Formatting
About the issue https://github.com/nushell/nushell/issues/7192, the
output will be:
```
〉[AAA BBB CCC] | uniq -i
╭───┬─────╮
│ 0 │ AAA │
│ 1 │ BBB │
│ 2 │ CCC │
╰───┴─────╯
```
About ignoring case for all children string, I expect this to be true:
```
([[origin, people];
[World, (
[[name, meal];
['Geremias', {plate: 'bitoque', carbs: 100}]
]
)],
[World, (
[[name, meal];
['Martin', {plate: 'bitoque', carbs: 100}]
]
)],
[World, (
[[name, meal];
['Geremias', {plate: 'Bitoque', carbs: 100}]
]
)],
] | uniq -i
) == ([[origin, people];
[World, (
[[name, meal];
['Geremias', {plate: 'bitoque', carbs: 100}]
]
)],
[World, (
[[name, meal];
['Martin', {plate: 'bitoque', carbs: 100}]
]
)]
])
```
# Description
Closes#6803.
You can look at the code and see this was always supposed to work this
way, but was broken due to 1 line (per file).
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While trying to add a new `uniq-by` command I refactored the `uniq`
command code to understand it and try to reuse. I think this is more
compact and easier to understand.
The part that I think it's a little confusing in this refactor is the
conditions inside `.filters()`, for example: `!flag_show_repeated ||
(value.1 > 1)`. I could use `if (flag_show_repeated) {value.1 > 1} else
{true}` but it is more verbose, what do you think?
PS: Not sure if you like this kind of PR, sorry if not.
# Tests + Formatting
I also added a test where the `uniq` has a table as input.
# Description
BEFORE:
```
〉ls | size
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #22:1:1]
1 │ ls | size
· ──┬─
· │╰── value originates from here
· ╰── expected: string
╰────
〉ls | sort-by SIZE
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #17:1:1]
1 │ ls | sort-by SIZE
· ───┬───
· │╰── value originates here
· ╰── cannot find column
╰────
〉[4kb] | path join 'b'
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #6:1:1]
1 │ [4kb] | path join 'b'
· ──┬──
· │╰── value originates from here
· ╰── expected: string or record
╰────
```
AFTER:
```
〉ls | size
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #1:1:1]
1 │ ls | size
· ─┬ ──┬─
· │ ╰── expected: string
· ╰── value originates from here
╰────
〉ls | get 0 | sort-by SIZE
Error: nu:🐚:column_not_found (link)
× Cannot find column
╭─[entry #2:1:1]
1 │ ls | get 0 | sort-by SIZE
· ─┬ ───┬───
· │ ╰── cannot find column 'SIZE'
· ╰── value originates here
╰────
〉[4kb] | path join 'b'
Error: nu:🐚:pipeline_mismatch (link)
× Pipeline mismatch.
╭─[entry #1:1:1]
1 │ [4kb] | path join 'b'
· ──┬── ────┬────
· │ ╰── expected: string or record
· ╰── value originates from here
╰────
```
(Hey, anyone noticed that there's TWO wordings of "value originates from
here" in this codebase………?)
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes a two's complement underflow/overflow when given a negative arg.
Breaking change as it is throwing an error instead of most likely
returning most of the output.
Same behavior as #7184
# Tests + Formatting
+ 1 failure test
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
- Error on negative argument to `last`
- Add test for negative value in last
Follow-up for #7178
# User-Facing Changes
Breaking change:
even before #7178 `last` returned an empty `list<any>` when given
negative indices.
Now this is an
[error](https://docs.rs/nu-protocol/latest/nu_protocol/enum.ShellError.html#variant.NeedsPositiveValue)
Note:
In #7136 we are considering supporting negative indexing
# Tests + Formatting
+ 1 failure test
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes: #6937
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
rust 1.65.0 has been released for a while, this pr applies lint
suggestions from rust 1.65.0.
# User-Facing Changes
N/A
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
BEFORE (notice Windows paths look wrong):
```
〉mv 8 9
Error:
× Destination file already exists
╭─[entry #22:1:1]
1 │ mv 8 9
· ┬
· ╰── you can use -f, --force to force overwriting the destination
╰────
〉mv d1 tmp
Error:
× Can't move "C:\\Users\\Leon\\TODO\\d1" to "C:\\Users\\Leon\\TODO\\tmp\\d1"
╭─[entry #19:1:1]
1 │ mv d1 tmp
· ─┬─
· ╰── Directory not empty
╰────
```
AFTER (full paths are now included in the arrows' messages to make lines
like `mv $foo` entirely unambiguous):
```
〉mv 8 9
Error:
× Destination file already exists
╭─[entry #4:1:1]
1 │ mv 8 9
· ┬
· ╰── Destination file 'C:\Users\Leon\TODO\tmp\9' already exists
╰────
help: you can use -f, --force to force overwriting the destination
〉mv d1 tmp
Error:
× Can't move 'C:\Users\Leon\TODO\d1' to 'C:\Users\Leon\TODO\tmp\d1'
╭─[entry #3:1:1]
1 │ mv d1 tmp
· ─┬─
· ╰── Directory 'C:\Users\Leon\TODO\tmp' is not empty
╰────
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when execute external sub command, auto-trimming end
new-lines, like how fish shell does.
And if the command is executed directly like: `cat tmp`, the result
won't change.
Fixes: #6816Fixes: #3980
Note that although nushell works correctly by directly replace output of
external command to variable(or other places like string interpolation),
it's not friendly to user, and users almost want to use `str trim` to
trim trailing newline, I think that's why fish shell do this
automatically.
If the pr is ok, as a result, no more `str trim -r` is required when
user is writing scripts which using external commands.
# User-Facing Changes
Before:
<img width="523" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468810-86b04dbb-c147-459a-96a5-e0095eeaab3d.png">
After:
<img width="505" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468599-7b537488-3d6b-458e-9d75-d85780826db0.png">
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Following up on #7180 with some feature cleanup:
- Move the `database` feature from `plugin` to `default`
- Rename the `database` feature to `sqlite`
- Remove `--features=extra` from a lot of scripts etc.
- No need to specify this, the `extra` feature is now the same as the
default feature set
- Remove the now-redundant 2nd Ubuntu test run
# Description
Support for this breaking change was raised in #7191. This affects
`sort`, `sort-by`, `str contains` and `find`. `--ignore-case` is used by
a few POSIX programs such as `less` and `grep`, as well as a few other
popular utils like `tree` and `wget`. Since long names aren't especially
popular (existing primarily for self-documentation purposes), I consider
this on the shallow end of the compat-break scale.
Note that the `-i` short flag is not affected.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This adds new pipeline connectors called out> and err> which redirect either stdout or stderr to a file. You can also use out+err> (or err+out>) to redirect both streams into a file.
Currently `last n` memory use is O(input), while it should be O(n). This
patch replaces code collecting all of last's input into a Vec<_> with
collecting into a bounded VecDeque<_>. UI/UX remain are unchanged.
Alters `all`, `any`, `each while`, `each`, `insert`, `par-each`, `reduce`, `update`, `upsert` and `where`,
so that their blocks take an optional parameter containing the index.
* Make json require string and pass around metadata
The json deserializer was accepting any inputs by coercing non-strings
into strings. As an example, if the input was `[1, 2]` the coercion
would turn into `[12]` and deserialize as a list containing number
twelve instead of a list of two numbers, one and two. This could lead
to silent data corruption.
Aside from that pipeline metadata wasn't passed aroud.
This commit fixes the type issue by adding a strict conversion
function that errors if the input type is not a string or external
stream. It then uses this function instead of the original
`collect_string()`. In addition, this function returns the pipeline
metadata so it can be passed along.
* Make other formats require string
The problem with json coercing non-string types to string was present in
all other text formats. This reuses the `collect_string_strict` function
to fix them.
* `IntoPipelineData` cleanup
The method `into_pipeline_data_with_metadata` can now be conveniently
used.
* add signature information when help on one command
* tell user that one command support operated on cell paths
Also, make type output to be more friendly, like `record<>` should just be `record`
And the same to `table<>`, which should be `table`
* simplify code
* don't show signatures for parser keyword
* update comment
* output arg syntax shape as type, so it's the same as describe command
* fix string when no positional args
* update signature body
* update
* add help signature test
* fix arg output format for composed data type like list or record
* fix clippy
* add comment
* Grouped config commands better
* Tweaked test slightly
* Fix merge conflict(?)
* Remove recently-added test case
* Revert rm.always_trash default
* Untweak rm help messages
* Formatting
* Remove example
* Add deprecation warning
* Remove deprecation timeline
Not sure we want to commit to a specific timeline just yet
Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
This adds support for (limited) mutable variables. Mutable variables are created with mut much the same way immutable variables are made with let.
Mutable variables allow mutation via the assignment operator (=).
❯ mut x = 100
❯ $x = 200
❯ print $x
200
Mutable variables are limited in that they're only tended to be used in the local code block. Trying to capture a local variable will result in an error:
❯ mut x = 123; {|| $x }
Error: nu::parser::expected_keyword (link)
× Capture of mutable variable.
The intent of this limitation is to reduce some of the issues with mutable variables in general: namely they make code that's harder to reason about. By reducing the scope that a mutable variable can be used it, we can help create local reasoning about them.
Mutation can occur with fields as well, as in this case:
❯ mut y = {abc: 123}
❯ $y.abc = 456
❯ $y
On a historical note: mutable variables are something that we resisted for quite a long time, leaning as much as we could on the functional style of pipelines and dataflow. That said, we've watched folks struggle to work with reduce as an approximation for patterns that would be trivial to express with local mutation. With that in mind, we're leaning towards the happy path.
- Custom commands are true for builtin and custom
- Add classification as external command
- Specify wildcard in keyword: keyword is true for builtin and keyword
* Fix ignore-errors for select
* fix Value::List match
* fix invalid rows
* add tests
* fix ListStream match
* add one more test for ListStream
* add more tests
* tweak words
* Add failing test that list of ints and floats is List<Number>
* Start defining subtype relation
* Make it possible to declare input and output types for commands
- Enforce them in tests
* Declare input and output types of commands
* Add formatted signatures to `help commands` table
* Revert SyntaxShape::Table -> Type::Table change
* Revert unnecessary derive(Hash) on SyntaxShape
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Allows use of slightly optimized variants that check if they have to use
the heavier vte parser. Tries to avoid unnnecessary allocations. Initial
performance characteristics proven out in #4378.
Also reduces boilerplate with right-ward drift.
* fix: fixcd
try to fix
Log: try to fix the bug with can enter a permisson error fold
* change wording
* fat
* fmt
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* make format filesize more flexible
* make code simpler
* finish refactor on bytes commands
* finish refactor on str commands
* fimplify code
* rename from column_paths to cell_paths
* fix: ✨ "saner" default for mv
fixes#6747
As highlighted in the issue, the default behavior of nu currently
is to overwrite the destination file without notice.
This is not a "standard" expectation users that want this behavior
can create a dedicated alias.
* fix: 📝 edit the comment
* fix: ✨ updated the tests
* fix: 🚧 use --force for case test
Fixes#6895
Warning: `Iterator::map_while` does not return a `FusedIterator`!
Depending on the consuming adaptor or code (e.g. for loop) the iteration
may be stopped but this is not guaranteed.
Adds a test example but Examples handle iterators like
`FusedIterator` and thus don't catch the regression
Cleanup the message on another test
* Remove unnecessary `#[allow]` annots
Reduce the number of lint exceptions that are not necessary with the
current state of the code (or more recent toolchain)
* Remove dead code from `FileStructure` in nu-command
* Replace `allow(unused)` with relevant feature switch
* Deal with `needless_collect` with annotations
* Change hack for needless_collect in `from json`
This change obviates the need for `allow(needless_collect)`
Removes a pessimistic allocation for empty strings, but increases
allocation size to `Value`
Probably not really worth it.
* Revert "Deal with `needless_collect` with annotations"
This reverts commit 05aca98445.
The previous state seems to better from a performance perspective as a
`Vec<String>` is lighter weight than `Vec<Value>`
* Wrap `open` parse errors from `from` commands
Minimal fix for #6843
This propagates the underlying errors from the called `from` commands
and adds a top-level error with the full path and the understood file
extension and resulting called command.
* Repoint inner span for `from ...` to `open`
* Add actionable message: refer to help or use --raw
* Filter out empty glob patterns
An empty argument to the "glob" command will now produce an empty result.
Working towards nushell/nushell#6653.
* Run `cargo fmt --all`
Just autoformatted the repo so that CI passes and we have a consistent code
format across modules.
* Treat empty glob argument as error
The glob command will now report an empty string argument as an error instead
of silently ignoring it.
See https://github.com/nushell/nushell/pull/6707#discussion_r993345013.
* Add tests for glob command
Two small tests for the glob command, one to check that the empty string errors
it, and another to sanity check the '*' glob, have been added.
* Rename glob sanity check star test
Co-authored-by: Kyle Anderson <kyle.anderson@uwaterloo.ca>
* Add search terms for uppercase
* Add search terms
* Add search terms
* Change to parse
* Add search terms for from
* Add search terms for to
* Remove duplicate function
* Remove duplication of search terms
* Remove search term
* add a new command to query the registry on windows
* cross platform tweaks
* return nushell datatype
* change visibility of exec and registry commands
