Go from the ill-defined `enable/disable` pairs to `.use_...` builders
This alleviates unclear properties when the underlying enhancements are
enabled. Now they are enabed when entering `Reedline::read_line` and
disabled when exiting that.
Furthermore allow setting `$env.config.use_kitty_protocol` to have an
effect when toggling during runtime. Previously it was only enabled when
receiving a value from `config.nu`. I kept the warning code there to not
pollute the log. We could move it into the REPL-loop if desired
Not sure if we should actively block the enabling of `bracketed_paste`
on Windows. Need to test what happens if it just doesn't do anything we
could remove the `cfg!` switch. At least for WSL2 Windows Terminal
already supports bracketed paste. `target_os = windows` is a bad
predictor for `conhost.exe`.
Depends on https://github.com/nushell/reedline/pull/659
(pointing to personal fork)
Closes https://github.com/nushell/nushell/issues/10982
Supersedes https://github.com/nushell/nushell/pull/10998
# Description
Fixes: #11033
Sorry for the issue, it's a regression which introduce by this pr:
#10456.
And this pr is going to fix it.
About the change: create a new field named `type_annotated` for
`Arg::Flag` and `Arg::Signature` instead of `arg_explicit_type`
variable.
When we meet a type in `TypeMode`, we set `type_annotated` field of the
argument to be true, then we know that if the arg have a annotated type
easily
We have three different `rustix` minor versions. For two of them with
their previous patch versions a security advisory has been released:
https://github.com/advisories/GHSA-c827-hfw6-qwvm
Bump the patch versions, to resolve the potential vulnerability.
At the moment we haven't assessed the potential impact on nushell,
whether we are exposed to the underlying issue.
The `color-backtrace` crate does not seem to either handle the terminal
modes well or operate in a way that the unwinding has not yet succeeded
to reach the backup disablement of the terminal raw mode in
`reedline::Reedline`'s `Drop` implementation.
This reverts commit d838871063.
Fixes#11029
This pull request fixes the tests for the `cargo.exe check` command. The
tests were failing due `cargo check -h` sometimes reporting `cargo.exe`
as the binary and thus not containing `cargo check` in the output.
The fix involves using the `Command` module from the `std::process`
library to run the command and comparing its output to the expected
output. No changes were made to the codebase itself.
# Description
Refactors the `flatten` command to remove a bunch of cloning. This was
down by passing ownership of the `Value` to `flat_value`, removing the
lifetime on `TableInside`, and using `Vec<Record>` in `FlattenedRows`
instead of a pair of `Vec` of columns and values.
For the quick benchmark below, it seems to be twice as fast now:
```nushell
let data = ls crates | where type == dir | each { ls $'($in.name)/**/*' }
timeit { for x in 0..1000 { $data | flatten } }
```
This took 550ms on v0.86.0 and only 230ms on this PR.
But considering that
```nushell
timeit { for x in 0..1000 { $data } }
```
takes 200ms on both versions, then the difference for `flatten` itself
is really 250ms vs 30ms -- 8x faster.
Provides support for reading Polars structs. This allows opening of
supported files (jsonl, parquet, etc) that contain rows with structured
data.
The following attached json lines
file([receipts.jsonl.gz](https://github.com/nushell/nushell/files/13311476/receipts.jsonl.gz))
contains a customer column with structured data. This json lines file
can now be loaded via `dfr open` and will render as follows:
<img width="525" alt="Screenshot 2023-11-09 at 10 09 18"
src="https://github.com/nushell/nushell/assets/56345/4b26ccdc-c230-43ae-a8d5-8af88a1b72de">
This also addresses some cleanup of date handling and utilizing
timezones where provided.
This pull request only addresses reading data from polars structs. I
will address converting nushell data to polars structs in a future
request as this change is large enough as it is.
---------
Co-authored-by: Jack Wright <jack.wright@disqo.com>
# Description
Generally elide a bunch of unnecessary clones. Both globally stopping to
clone the whole input data in a bunch of places where we need to read it
but also some minor places where we currently cloned.
As part of that, we can make the overwriting with `keep-all` and
`keep-last` inplace so the items don't need to be removed and repushed
to the record.
# Benchmarking
```nu
timeit { scope commands | transpose -r }
```
Before ~24 ms now just ~5 ms
# User-Facing Changes
This can change the order of apperance in the transposed record with
`--keep-last`/`--keep-all`. Now the
order is determined by the first appearance and not by the last
appearance in the ingoing columns.
This mirrors the behavior when not passed `keep-all` or `keep-last`.
# Tests + Formatting
Sadly the `transpose` command is so far undertested for more complex
operations.
# Description
I've had a few PRs fail clippy in CI after they pass `toolkit check pr`
because the clippy settings are different. This brings `toolkit.nu` into
alignment with CI and leaves notes to prompt future synchronization.
# User-Facing Changes
N/A
# Tests + Formatting
`cargo` output elided:
```
❯ toolkit check pr
running `toolkit fmt`
running `toolkit clippy`
running `toolkit clippy` on tests
running `toolkit clippy` on plugins
running `toolkit test`
running `toolkit test stdlib`
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
```
# After Submitting
N/A
# Description
This PR refactors `drop columns` and fixes issues #10902 and #6846.
Tables with "holes" are now handled consistently, although still
somewhat awkwardly. That is, the columns in the first row are used to
determine which columns to drop, meaning that the columns displayed all
the way to the right by `table` may not be the columns actually being
dropped. For example, `[{a: 1}, {b: 2}] | drop column` will drop column
`a` instead of `b`. Before, this would give a list of empty records.
# User-Facing Changes
`drop columns` can now take records as input.
# Description
Compatible with `Vec::truncate` and `indexmap::IndexMap::truncate`
Found useful in #10903 for `drop column`
# Tests + Formatting
Doctest with the relevant edge-cases
# Description
Add an extension trait `IgnoreCaseExt` to nu_utils which adds some case
insensitivity helpers, and use them throughout nu to improve the
handling of case insensitivity. Proper case folding is done via unicase,
which is already a dependency via mime_guess from nu-command.
In actuality a lot of code still does `to_lowercase`, because unicase
only provides immediate comparison and doesn't expose a `to_folded_case`
yet. And since we do a lot of `contains`/`starts_with`/`ends_with`, it's
not sufficient to just have `eq_ignore_case`. But if we get access in
the future, this makes us ready to use it with a change in one place.
Plus, it's clearer what the purpose is at the call site to call
`to_folded_case` instead of `to_lowercase` if it's exclusively for the
purpose of case insensitive comparison, even if it just does
`to_lowercase` still.
# User-Facing Changes
- Some commands that were supposed to be case insensitive remained only
insensitive to ASCII case (a-z), and now are case insensitive w.r.t.
non-ASCII characters as well.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
Replaces the only usage of `Value::follow_cell_path_not_from_user_input`
with some `Record::get`s.
# User-Facing Changes
Breaking change for `nu-protocol`, since
`Value::follow_cell_path_not_from_user_input` was deleted.
Nushell now reports errors for when environment conversions are not
closures.
# Description
This is pretty complementary/orthogonal to @IanManske 's changes to
`Value` cellpath accessors in:
- #10925
- to a lesser extent #10926
## Steps
- Use `R.remove` in `Value.remove_data_at_cell_path`
- Pretty sound after #10875 (tests mentioned in commit message have been
removed by that)
- Update `did_you_mean` helper to use iterator
- Change `Value::columns` to return iterator
- This is not a place of honor
- Use `Record::get` in `Value::get_data_by_key`
# User-Facing Changes
None intentional, potential edge cases on duplicated columns could
change (considered undefined behavior)
# Tests + Formatting
(-)
Matches the general behavior of `Vec::drain` or
`indexmap::IndexMap::drain`:
- Drop the remaining elements (implementing the unstable `keep_rest()`
would not be compatible with something like `indexmap`)
- No `AsRef<[T]>` or `Drain::as_slice()` behavior as this would make
layout assumptions.
- `Drain: DoubleEndedIterator`
Found useful in #10903
# Description
Based of the work and discussion in #10844, this PR adds the `exec`
command for Windows. This is done by simply spawning a
`std::process::Command` and then immediately exiting via
`std::process::exit` once the child process is finished. The child
process's exit code is passed to `exit`.
# User-Facing Changes
The `exec` command is now available on Windows, and there should be no
change in behaviour for Unix systems.
# Description
Where appropriate, this PR replaces instances of
`Value::get_data_by_key` and `Value::follow_cell_path` with
`Record::get`. This avoids some unnecessary clones and simplifies the
code in some places.
Adds a special error, which is triggered by `alias foo=bar` style
commands. It adds a help string which recommends adding spaces.
Resolve#10958
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
Our config exists both as a `Config` struct for internal consumption and
as a `Value`. The latter is exposed through `$env.config` and can be
both set and read.
Thus we have a complex bug-prone mechanism, that reads a `Value` and
then tries to plug anything where the value is unrepresentable in
`Config` with the correct state from `Config`.
The parsing involves therefore mutation of the `Value` in a nested
`Record` structure. Previously this was wholy done manually, with
indices.
To enable deletion for example, things had to be iterated over from the
back. Also things were indexed in a bunch of places. This was hard to
read and an invitation for bugs.
With #10876 we can now use `Record::retain_mut` to traverse the records,
modify anything that needs fixing, and drop invalid fields.
# Parts:
- Error messages now consistently use the correct spans pointing to the
problematic value and the paths displayed in some messages are also
aligned with the keys used for lookup.
- Reconstruction of values has been fixed for:
- `table.padding`
- `buffer_editor`
- `hooks.command_not_found`
- `datetime_format` (partial solution)
- Fix validation of `table.padding` input so value is not set (and
underflows `usize` causing `table` to run forever with negative values)
- New proper types for settings. Fully validated enums instead of
strings:
- `config.edit_mode` -> `EditMode`
- Don't fall back to vi-mode on invalid string
- `config.table.mode` -> `TableMode`
- there is still a fall back to `rounded` if given an invalid
`TableMode` as argument to the `nu` binary
- `config.completions.algorithm` -> `CompletionAlgorithm`
- `config.error_style` -> `ErrorStyle`
- don't implicitly fall back to `fancy` when given an invalid value.
- This should also shrink the size of `Config` as instead of 4x24 bytes
those fields now need only 4x1 bytes in `Config`
- Completely removed macros relying on the scope of `Value::into_config`
so we can break it up into smaller parts in the future.
- Factored everything into smaller files with the types and helpers for
particular topics.
- `NuCursorShape` now explicitly expresses the `Inherit` setting.
conversion to option only happens at the interface to `reedline`
# Description
Since #10841 the goal is to remove the implementation details of
`Record` outside of core operations.
To this end use Record iterators and map-like accessors in a bunch of
places. In this PR I try to collect the boring cases where I don't
expect any dramatic performance impacts or don't have doubts about the
correctness afterwards
- Use checked record construction in `nu_plugin_example`
- Use `Record::into_iter` in `columns`
- Use `Record` iterators in `headers` cmd
- Use explicit record iterators in `split-by`
- Use `Record::into_iter` in variable completions
- Use `Record::values` iterator in `into sqlite`
- Use `Record::iter_mut` for-loop in `default`
- Change `nu_engine::nonexistent_column` to use iterator
- Use `Record::columns` iter in `nu-cmd-base`
- Use `Record::get_index` in `nu-command/network/http`
- Use `Record.insert()` in `merge`
- Refactor `move` to use encapsulated record API
- Use `Record.insert()` in `explore`
- Use proper `Record` API in `explore`
- Remove defensiveness around record in `explore`
- Use encapsulated record API in more `nu-command`s
# User-Facing Changes
None intentional
# Tests + Formatting
(-)
# Description
This change allows the vscode-specific ansi escape sequence of
633;P;Cwd= to be run when nushell detects that it's running inside of
vscode's terminal. Otherwise the standard OSC7 will run. This is helpful
with ctrl+g inside of vscode terminal as well.
closed#10989
/cc @CAD97
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- Simplify `table` record highlight with `.get_mut`
- pretty straight forward
- Use record iterators in `table` abbreviation logic
- This required some rework if we go from guaranted contiguous arrays to
iterators
- Refactor `nu-table` internals to new record API
# User-Facing Changes
None intened
# Tests + Formatting
(-)
# Description
Rewrite `find` internals with the same principles as in #10927.
Here we can remove an unnecessary lookup accross all columns when not
narrowing find to particular columns
- Change `find` internal fns to use iterators
- Remove unnecessary quadratic lookup in `find`
- Refactor `find` record highlight logic
# User-Facing Changes
Should provide a small speedup when not providing `find --columns`
# Tests + Formatting
(-)
# Description
Changes the `captures` field in `Closure` from a `HashMap` to a `Vec`
and makes `Stack::captures_to_stack` take an owned `Vec` instead of a
borrowed `HashMap`.
This eliminates the conversion to a `Vec` inside `captures_to_stack` and
makes it possible to avoid clones altogether when using an owned
`Closure` (which is the case for most commands). Additionally, using a
`Vec` reduces the size of `Value` by 8 bytes (down to 72).
# User-Facing Changes
Breaking API change for `nu-protocol`.
# Description
This is easy to do with rust-analyzer, but I didn't want to just pump
these all out without feedback.
Part of #10700
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
`split-by` only works on a `Record`, the error type was updated to
match, and now uses a more-specific type. (Two type fixes for the price
of one!)
The `usage` was updated to say "record" as well
# User-Facing Changes
* Providing the wrong type to `split-by` now gives an error messages
with the correct required input type
Previously:
```
❯ ls | get name | split-by type
Error: × unsupported input
╭─[entry #267:1:1]
1 │ ls | get name | split-by type
· ─┬─
· ╰── requires a table with one row for splitting
╰────
```
With this PR:
```
❯ ls | get name | split-by type
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[entry #1:1:1]
1 │ ls | get name | split-by type
· ─┬─
· ╰── requires a record to split
╰────
```
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Only generated commands need to be updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Limit the test `-p nu-command --test main
commands::run_external::redirect_combine` which uses `sh` to running on
`not(Windows)` like is done for other tests assuming unixy CLI items;
`sh` doesn't exist on Windows.
# User-Facing Changes
None; this is a change to tests only.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
@jntrnr discovered that `items` wasn't properly setting the
`eval_block_with_early_return()` block settings. This change fixes that
which allows `echo` to be redirected and therefore pass data through the
pipeline.
Without `echo`
```nushell
❯ { new: york, san: francisco } | items {|key, value| $'($key) ($value)' }
╭─┬─────────────╮
│0│new york │
│1│san francisco│
╰─┴─────────────╯
```
With `echo`
```nushell
❯ { new: york, san: francisco } | items {|key, value| echo $'($key) ($value)' }
╭─┬─────────────╮
│0│new york │
│1│san francisco│
╰─┴─────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the `items` example so that it doesn't use `echo`.
`echo` now works like print unless it's being redirected, so it doesn't
send values through the pipeline anymore like the example showed.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Just throwing up this PR because color-backtrace seemed to produce more
useful backtraces. Just curious what others think.
Did this:
1. RUST_BACKTRACE=full cargo r
2. ❯ def test01 [] {
let sorted = [storm]
$sorted | range 1.. | zip ($sorted | range ..(-2))
}
3. test01
I like how it shows the code snippet.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I committed things in my nushell folder that I shouldn't have. oops.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates the trash dependency from 3.1.0 to 3.1.2 for better
support on FreeBSD.
closes#10961
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
These tests got orphaned and they would be a good place to test behavior
I want to add for #10867
# User-Facing Changes
None
# Tests + Formatting
Tests were updated to account for removed test infrastructure
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
The `PluginSignature` type supports extra usage but this was not
available in `plugin_name --help`. It also supports search terms but
these did not appear in `help commands`
New behavior show below is the "Extra usage for nu-example-1" line and
the "Search terms:" line
```
❯ nu-example-1 --help
PluginSignature test 1 for plugin. Returns Value::Nothing
Extra usage for nu-example-1
Search terms: example
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
opt <int>: Optional number (optional)
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
Search terms are also available in `help commands`:
```
❯ help commands | where name == "nu-example-1" | select name search_terms
╭──────────────┬──────────────╮
│ name │ search_terms │
├──────────────┼──────────────┤
│ nu-example-1 │ example │
╰──────────────┴──────────────╯
```
# User-Facing Changes
Users can now see plugin extra usage and search terms
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Added "Use `--help` for more information." to the help of
MissingPositional error
- this PR should close
[#10946](https://github.com/nushell/nushell/issues/10946)
**Before:**
**After:**
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Denis Zorya <denis.zorya@trafigura.com>
- Replaced `start`/`end` with span.
- Fixed standard library.
- Add `help` option.
- Add a couple more errors for invalid record types.
Resolve#10914
# Description
# User-Facing Changes
- **BREAKING CHANGE:** `error make` now takes in `span` instead of
`start`/`end`:
```Nushell
error make {
msg: "Message"
label: {
text: "Label text"
span: (metadata $var).span
}
}
```
- `error make` now has a `help` argument for custom error help.
# Description
After talking to @CAD97, I decided to change these unwraps to expects.
See the comments. The bigger question is, how did unwrap pass the CI?
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
