I haven't tested cause can't reproduce, but the issue very likely was
related to a emojies. (I mean I probably could but ....)
Could you try it @fdncred?
fix#10560
# Description
This PR bumps the rust toolchain to 1.71.1
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#10537. Basically error message was unhelpful, and this temporary
measure adds back the nice previous nushell error message. Ideally, we
would like to add a more permanent solution mentioned in the issue
[comments](https://github.com/nushell/nushell/issues/10537#issuecomment-1743686122),
but since we want to have `ucp` as `cp` on new release, this is hackier
but way simpler so this fix should do it.
Only downside is that now behavior differs from `uutils` in the sense
that:
```
uutils:
> cp a foo/ bar
ls bar
# foo/a
nushell:
>ucp a foo/ bar
# directory error (not copied) ....
```
So, since its non fatal error, uutils copies a, but nushell errors out
with nothing copied. If we go to option 3 mentioned above, then we can
decide what we want to do, and perhaps continue on a non fatal error.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
to check that you're using the standard code style
- [X] `cargo test --workspace` to check that all tests pass (on Windows
make sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- [X] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Fixes#10586
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Any partial path that begins with or is surrounded by a quote or
backtick will be tab completed. The completed result would be surrounded
by backticks unconditionally.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
See above.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Formatted and added test cases.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
To my knowledge `type@completer` annotations only make sense in
arguments at the moment.
Restrict the parsing.
Also fix a bug in parsing the completer annotation should there be more
than 1 `@`
- Add test that we disallow completer in type
- Guard against `@` inside command name
- Disallow custom completers in type specification
# User-Facing Changes
Error when annotating a variable or input-output type with a completer
# Tests + Formatting
Tests to verify the error message
Implemented URL decoding as a url subcommand, created corresponding unit
tests. The logic, examples and descriptions were based on the existing
`url encode` command.
Resolves#10563
# Description
Added a new `url decode` command to compliment the existing `url
encode`, as proposed by myself in #10563.
It takes a string, list of strings or cell path and produces the
corresponding decoded strings.
# User-Facing Changes
New url subcommand `url decode`, as described above.
# Tests + Formatting
I've added unit tests for the new subcommand and ensured all actions
outlined below showed no issues.
- [x] `cargo fmt --all -- --check`
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used`
- [x] `cargo test --workspace`
- [x] `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"`
# Description
This PR removes the underline from the log format. It's been messing
things up for me since there is no ansi reset in the log format and
therefore everything after it is underlined.
This PR should end things like this.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Reverts nushell/nushell#10596
Using the long option in examples is going to be confusing as it makes
the reader think the long option is required. It also isn't idiomatic
Nushell.
The examples should be copy-paste-able as idiomatic Nushell, so as such
we shouldn't expand them to the long flag name.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Long options are preferable over short ones for documentation.
This PR ports some command examples to exclusively use long options.
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
✅
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/issues/9373
- https://github.com/nushell/nushell/issues/8639
might be able to close https://github.com/nushell/nushell/issues/8639?
# Description
"can't follow stream paths" errors have always been a bit scary and
obnoxious because they give no information about what happens...
in this PR i try to slightly improve the error message by telling if the
stream was empty or not and give span information when available.
# User-Facing Changes
```nushell
> update value (get value)
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #1:1:1]
1 │ update value (get value)
· ─┬─
· ╰── empty pipeline doesn't support cell paths
╰────
```
```nushell
> ^echo "foo" | get 0
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #2:1:1]
1 │ ^echo "foo" | get 0
· ──┬─
· ╰── external stream doesn't support cell paths
╰────
```
# Tests + Formatting
# After Submitting
# Description
When referring to the type use `int` consistently. Only when referring
to the concept of integer numbers use `integer`.
- Fix `random integer` to `random int` tests
- Forgot in #10520
- Use int instead of integer in error messages
- Use int type name in bits commands
- Fix messages in `for` examples
- Use int typename in `into` commands
- Use int typename in rest of commands
- Report errors in `nu-protocol` with int typename
Work for #10332
# User-Facing Changes
User errorrs should now use `int` so you can easily find the necessary
commands or type annotations.
# Tests + Formatting
Only two tests found that needed updating
code cleanup of *eval.rs*
I was reviewing the engine code and noticed this...
The *eval_element_with_input* method in eval.rs does not need to be
public at the moment
because no one is calling it...
@jntrnr is making this method not public going to block someone in the
future who might need it ?
Right now its not being used so I decided to tighten up the API a bit...
# Description
This removes the old style "cd with abbreviations" that would attempt to
guess what directory you wanted to `cd` to. This would sometimes have
false positives, so we left it off by default in the config.
In the current main, we have much-improved path completions
(https://github.com/nushell/nushell/pull/10543) so you can now do `cd
a/b<tab>` and get a much better experience (because you can see the
directory you're about to cd to). This removes the need for the previous
abbreviation system.
# User-Facing Changes
This does remove the old abbreviation system. It will likely mean that
old config files that have settings for abbreviations will now get
errors.
update: here's an example of the error you'll see:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This allows auto-cd (cd'ing by just typing the directory name with `cd`)
to work if there's a trailing slash in the path.
# User-Facing Changes
This should be an improvement over previous behaviour. I don't think
this clashes with any existing assumptions.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close#5683
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR allows tab completion for nested directories while only
specifying a part of the directory names. To illustrate this, if I type
`tar/de/inc` and hit tab, it autocompletes to
`./target/debug/incremental`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Nested paths can be tab completed by typing lesser characters.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests cases are added.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a few more grid icons and updates some existing ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds warning to `url join` when input key is not supported as suggested
by @amtoine in #10506.
It just adds a `println!` statement but it seems like that is all that
is done for other warnings, e.g.,
20aaaaf90c/crates/nu-glob/src/lib.rs (L434)
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All pass.
follow up to
- #10283
# Description
even though it appears defining `to foo` does not allow to do `save
x.foo` for free (see https://github.com/nushell/nushell/issues/10429),
because #10283 did add `from ndjson` and `from jsonl` to the standard
library, i thought adding their `to ...` counterpart would make sense
😋
# User-Facing Changes
users can now convert structured data back to NDJSON and JSONL 👌
# Tests + Formatting
this PR adds the exact same tests as for the `from ...` commands
- structured data is in `result` and the string is now the expected
- the two invalid `from ...` tests cannot be reproduced for `to ...`
afaik
# After Submitting
Remove code for 2 no-longer-used configuration options in `explore`:
`explore.config.cursor_color` and `explore.config.border_color`.
Think I made these unnecessary in
https://github.com/nushell/nushell/pull/10533 and
https://github.com/nushell/nushell/pull/10270 but missed this code, my
bad. The `explore` config code is a little hard to follow because it
does so many key lookups in hashmaps.
# Description
Retrieving tests and their annotation no longer uses nu --ide-ast
spawned in a subprocess which should reduce test runner startup time.
# User-Facing Changes
# Tests + Formatting
# After Submitting
This PR removes the `line_head_top`, `line_head_bottom`, `line_shift`,
and `line_index` configuration options from `explore`. These were
previously used to control whether the horizontal+vertical lines in this
`ls | explore -i` screenshot would be displayed:
Now, all lines are displayed (same as the previous default config
values) and this is no longer configurable.
## Context
I'm continuing to chip away at `explore` when I have time. I have a
long-term goal to make `explore` simpler for users+developers. For now
I'm mostly making small incremental changes where I find underused
functionality+configuration and remove it; hopefully eventually this
will make it easier to make larger changes.
I found these specific config options a little hard to understand when
reading `explore` code, and when reading `config.nu` as a user their
behaviour+naming is not obvious. I also think that in the long term,
`explore` styling should inherit most styling from `table` instead of
having its own styling system.
The value rendering code in explore is _very_ flexible; values can be
rendered with orientation `Top`, `Left`, `Bottom`, or `Right`. The
default is `Top` for tables (header at the top) and `Left` for records
(header on the left).
This PR removes `Bottom` and `Right`; they are largely untested,
probably used by nobody, and they complicate the rendering code.
## Testing Performed
I've manually confirmed that tables and records still render the same
ass before, and the `t`/transpose command still works.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
> [!NOTE]
> This PR description originally used examples where the `generator`
closure returned a list. It has since been updated to use records
instead.
The `unfold` command allows users to dynamically generate streams of
data. The stream is generated by repeatedly invoking a `generator`
closure. The `generator` closure accepts a single argument and returns a
record containing two optional keys: 'out' and 'next'. Each invocation,
the 'out' value, if present, is added to the stream. If a 'next' key is
present, it is used as the next argument to the closure, otherwise
generation stops.
The name "unfold" is borrowed from other functional-programming
languages. Whereas `fold` (or `reduce`) takes a stream of values and
outputs a single value, `unfold` takes a single value and outputs a
stream of values.
### Examples
A common example of using `unfold` is to generate a fibbonacci sequence.
See
[here](6ffdac103c/src/sources.rs (L65))
for an example of this in rust's `itertools`.
```nushell
> unfold [0, 1] {|fib| {out: $fib.0, next: [$fib.1, ($fib.0 + $fib.1)]} } | first 10
───┬────
0 │ 0
1 │ 1
2 │ 1
3 │ 2
4 │ 3
5 │ 5
6 │ 8
7 │ 13
8 │ 21
9 │ 34
───┴────
```
This command is particularly useful when consuming paginated APIs, like
Github's. Previously, nushell users might use a loop and buffer
responses into a list, before returning all responses at once. However,
this behavior is not desirable if the result result is very large. Using
`unfold` avoids buffering and allows subsequent pipeline stages to use
the data concurrently, as it's being fetched.
#### Before
```nushell
mut pages = []
for page in 1.. {
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
$pages = ($pages | append $resp)
if ($resp | length) < $PAGE_SIZE {
break
}
}
$pages
```
#### After
```nu
unfold 1 {|page|
let resp = http get (
{
scheme: https,
host: "api.github.com",
path: "/repos/nushell/nushell/issues",
params: {
page: $page,
per_page: $PAGE_SIZE
}
} | url join)
if ($resp | length) < $PAGE_SIZE {
{out: $resp}
} else {
{out: $resp, next: ($page + 1)}
}
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- An `unfold` generator is added to the default context.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Given the complexity of the `generator` closure's return value, it would
be good to document the semantics of `unfold` and provide some in-depth
examples showcasing what it can accomplish.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
resolves#4869
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds a `help escape` command that can be used to display a table of
string escape sequences and their outputs.
```nu
help escapes
```
```nu
help escapes -h
```
The command should also appear in the list displayed when tab
autocompleting on `help`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users can now use a new `help escapes` command to output a table of
string escape sequences and their outputs.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Need to update docs to reflect existence of the new `help escapes`
command.
# Description
Fixes: #7085
Also closes: #7526
# User-Facing Changes
After this change, we need to use `-c` flag like this:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham }
```
But we can rename many columns easily, here is another example:
```nushell
[[a, b, c]; [1, 2, 3]] | rename -c { a: ham, b: ham2 }
```
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
This fixes the default prompt on Windows to use the correct path
direction
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Align the clippy checks done by `toolkit check pr` with the ones done by
github CI when you post a PR.
Motivated in no small part by my frustration at having the third PR in
one day fail due to a lint that `toolkit check pr` didn't find!
# Description
Change definition of `toolkit clippy`
* always run checks on all crates in the workspace
* always run checks on tests as well as non-test code
* don't check for `unwrap_used`. There are many (legit) uses of
`.unwrap()` in tests,
*
# User-Facing Changes
Changes to `toolkit clippy`:
* remove `--workspace` switch
* `--features` is no longer mutually exclusive with `--workspace`
# Tests + Formatting
n/a
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
The description `Custom` doesn't really reflect meaning in the set of
`SyntaxShape`. Makes it a bit more verbose but explicit
# User-Facing Changes
Only hypothetically breaking as plugins can not effectively use a
requirement on `SyntaxShape::Custom`.
# Tests + Formatting
(-)
related to
- https://github.com/nushell/nushell/pull/10532
# Description
i was reviewing https://github.com/nushell/nushell/pull/10532 and
thought
> wait a minute, this line is huge and it's basically impossible to
review properly...
i had to grab the diff and throw some Nushell magic at it to see that it
was valid 😱
in this PR, i just split the loooooong string on the `:`, put that in a
list, join with `.join(":")` and borrow that to get a `str` 👌
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Closes#10441
Uses `String::to_lowercase()` when the file's extension `ext` is parsed
to allow `from_decl(format!("from {ext}"))` to return the desired output
regardless of extension case.
It doesn't work with sqlite files since those are handled earlier in the
parsing but I think is good- since there's no standard file extension
used by sqlite so a user will likely want case sensitivity in that case.
This also has the (possibly undesired) effect of making `open`
completely case insensitive, e.g. `open foo.JSON` will work on a file
named `foo.json` and vice versa. This is good on Windows as it treats
`foo.json` and `foo.JSON` as the same file, but may not be the desired
behaviour on Unix.
If this behaviour is undesired I assume it would be fixed with a
`#[cfg(not(unix))]` attribute on the `to_lowercase()` operation but that
produces slightly "uglier" code that I didn't wish to submit unless
necessary.
old behaviour:
new behaviour:
# User-Facing Changes
`open` will now present a table when `open`-ing files with captitalized
extensions rather than the file's raw data
# Tests + Formatting
new test: `parses_file_with_uppercase_extension` which tests the desired
behaviour
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
This pr closes#10521.
# Description
The default prompt by nushell will replace `$nu.home-path` with `~`.
E.g. for a user named `user`, `/home/user` would become `~`. This also
works with sub paths, e.g. `/home/user/docs` would become `~/docs`.
The issue is that this replacement was a tad overzealous. A path like
`/home/user-with-suffix` would become `~-with-suffix`. This PR fixes the
issue by updating the home path detection logic.
# User-Facing Changes
The bugged behavior no longer occurs.
# Tests + Formatting
* `cargo` checks were not performed as this does not touch rust.
* The updated logic was tested against
[elvish](https://github.com/elves/elvish)'s path replacement logic, for
~10,000 randomly selected folders on a linux server. All paths were
processed the same.
# Description
This merges @horasal 's changes from #10246 and #10269Closes#10205Closes#8714
Fixes the bug that editor paths with spaces are unusable
Closes#10210Closes#10269
# User-Facing Changes
You can now either pass a string with the name of the executable or a
list with the executable and any flags to
`$env.config.buffer_editor`/`$env.EDITOR`/`$env.VISUAL`
Both the external buffer editor of reedline (by default bound to
`Ctrl-o`) and the commands `config nu` and `config env` will respect
those variables in the following order:
1. `$env.config.buffer_editor`
2. `$env.EDITOR`
3. `$env.VISUAL`
Example:
```
$env.EDITOR = "nvim" # The system-wide EDITOR is neovim
$env.config.buffer_editor = ["vim" "-p2"] # Force vim to open two tabs (not particularly useful)
$env.config.buffer_editor = null # Unset `buffer_editor` -> Uses `$env.EDITOR` ergo nvim
```
# Tests + Formatting
None
---------
Co-authored-by: Horasal <1991933+horasal@users.noreply.github.com>
# Description
Support keyboard enhancement protocol as implemented by Kitty console,
hence Kitty protocol.
This PR enables Nushell to use keybinding that is not available before,
such as Ctrl+i (that alias to Tab) or Ctrl+e (that alias to Esc, likely
I mistaken). After this PR merged and you set `use_kitty_protocol`
enabled, if your console app support Kitty protocol (WezTerm, Kitty,
etc.) you will be able to set more fine-grained keybinding.
For Colemak users, this feature is a blessing, because some Ctrl+[hjkl]
that previously unmap-able to Ctlr+[hnei] now it is.
# User-Facing Changes
This adds `use_kitty_protocol` config which defaults to false. When set
to `true`, it enables kitty protocol on the line editor when supported,
or else it warns.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Fixes#10503
Also improves link to metacharacter help;
# Description
`glob` code was using pattern as provided by user. If that had leading
`..\`, `wax::Glob` is documented to treat them as literal chars to be
matched.
Fix is to use `wax::Glob.partition()` to split such invariant prefixes
off the pattern and tack them onto the working directory computed
separately.
Before
```
> ls ..
╭───┬───────┬──────┬──────┬───────────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼───────────────┤
│ 0 │ ../r1 │ dir │ 7 B │ 3 hours ago │
│ 1 │ ../r2 │ dir │ 3 B │ a day ago │
│ 2 │ ../r3 │ dir │ 13 B │ 4 minutes ago │
╰───┴───────┴──────┴──────┴───────────────╯
> glob ../r*
╭────────────╮
│ empty list │
╰────────────╯
```
After
```
> glob ../r*
╭───┬──────────────────────────────╮
│ 0 │ /home/bobhy/src/rust/work/r2 │
│ 1 │ /home/bobhy/src/rust/work/r1 │
│ 2 │ /home/bobhy/src/rust/work/r3 │
╰───┴──────────────────────────────╯
```
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
More incremental `explore` improvements!
This PR removes the `show_cursor` config from the `explore` command, in
favour of always using the background colour to highlight the selected
cell. I believe this is a better default and I'd like to remove the
`show_cursor` functionality entirely as part of the effort to simplify
`explore`.
The style for selected cells is still configurable. I went with light
blue for the default background colour, it looks OK to me.
## Before:
## After:
