* fix#4161
println! and friends will panic on BrokenPipe. The solution is to use
writeln! instead, and ignore the error (or do we want to do something else?)
* test that nu doesn't panic in case of BrokenPipe error
* fixup! test that nu doesn't panic in case of BrokenPipe error
* make do_not_panic_if_broken_pipe only run on UNIX systems
I removed the Inflector dependency in favor of heck for two reasons:
- to close#3674.
- heck seems simpler and actively maintained
We could probably alter the structure of the `str_` module to expose the
individual casing behaviors better.
I did not feel as confident on changing those signatures.
So I took a lazier approach of a macro in the `mod.rs` that creates the public
shimming function to heck's traits.
* Fix Configuration section in bug report template
Change the placeholder content to actually match the `to md` output, and add `--pretty`
* Don't omit data in placeholder configuration table
* Remove blank line in bug_report.yml
* fix#4140
We are passing commands into a shell underneath but we were not
escaping arguments correctly. This new version of the code also takes
into consideration the ";" and "&" characters, which have special
meaning in shells.
We would probably benefit from a more robust way to join arguments to
shell programs. Python's stdlib has shlex.join, and perhaps we can
take that implementation as a reference.
* clean up escaping of posix shell args
I believe the right place to do escaping of arguments was in the
spawn_sh_command function. Note that this change prevents things like:
^echo "$(ls)"
from executing the ls command. Instead, this will just print
$(ls)
The regex has been taken from the python stdlib implementation of shlex.quote
* fix non-literal parameters and single quotes
* address clippy's comments
* fixup! address clippy's comments
* test that subshell commands are sanitized properly
* have save --append create file if not exists
Currently, doing:
echo a | save --raw --append file.txt
will fail if file.txt does not exist. This PR changes that
* test that `save --append` will create new file
`winget install nu` fails because there's other options for "nu" now.
Using the full `nushell` word solved it for me.
[Imgur](https://imgur.com/aqz2qNp)
Typing `selector -qa` into nu would cause a `panic!`
This was the case because the inner loop incremented the `idx`
that was only checked in the outer loop and used it to index into
`lite_cmd.parts[idx]`
With the fix we now break loop.
Co-authored-by: ahkrr <alexhk@protonmail.com>
* compiles on nightly now. (breaking change)
* less deps
* Switch over to new resolver
(it's been stable for a while.)
* let's leave num-format for another PR
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* Fix Running echo .. starts printing integers forever
* Allow for multiple table scraping
* linting
* Fix clippy
* linting
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
Very often we need to work with tables (say extracted from unstructured data or some
kind of final report, timeseries, and the like).
It's inevitable we will be having columns that we can't know beforehand what their names
will be, or how many.
Also, we may end up with certain cells having values we may want to remove as we explore.
Here, `update cells` fundamentally goes over every cell in the table coming in and updates
the cell's contents with the output of the block passed. Basic example here:
```
> [
[ ty1, t2, ty];
[ 1, a, $nothing]
[(wrap), (0..<10), 1Mb]
[ 1s, ({}), 1000000]
[ $true, $false, ([[]])]
] | update cells { describe }
───┬───────────────────────┬───────────────────────────┬──────────
# │ ty1 │ t2 │ ty
───┼───────────────────────┼───────────────────────────┼──────────
0 │ integer │ string │ nothing
1 │ row Column(table of ) │ range[[integer, integer)] │ filesize
2 │ string │ nothing │ integer
3 │ boolean │ boolean │ table of
───┴───────────────────────┴───────────────────────────┴──────────
```
and another one (in the examples) for cases, say we have a timeseries table generated and
we want to remove the zeros and have empty strings and save it out to something like CSV.
```
> [
[2021-04-16, 2021-06-10, 2021-09-18, 2021-10-15, 2021-11-16, 2021-11-17, 2021-11-18];
[ 37, 0, 0, 0, 37, 0, 0]
] | update cells {|value| i
if ($value | into int) == 0 {
""
} {
$value
}
}
───┬────────────┬────────────┬────────────┬────────────┬────────────┬────────────┬────────────
# │ 2021-04-16 │ 2021-06-10 │ 2021-09-18 │ 2021-10-15 │ 2021-11-16 │ 2021-11-17 │ 2021-11-18
───┼────────────┼────────────┼────────────┼────────────┼────────────┼────────────┼────────────
0 │ 37 │ │ │ │ 37 │ │
───┴────────────┴────────────┴────────────┴────────────┴────────────┴────────────┴────────────
```
* Support completion when cursor inside an argument
Bash supports completion even when cursor is in an argument, this is very useful for some fixup after the initial completion.
Let add this feature as well.
Signed-off-by: Tw <wei.tan@intel.com>
* Add test for when cursor inside an argument
To support test this case, let's also take the position into account.
Signed-off-by: Tw <wei.tan@intel.com>
* Change path join signature
* Appending now works without flag
* Column path operation is behind a -c flag
* Move column path arg retrieval to a function
Also improves errors
* Fix path join tests
* Propagate column path changes to all path commands
* Update path command examples with columns paths
* Modernize path command examples by removing "echo"
* Improve structured path error message
* Fix typo
* Expand path when converting value -> PathBuf
Also includes Tagged<PathBuf>.
Fixes#3605
* Expand path for PATH env. variable
Fixes#1834
* Remove leftover Cows after nu-path refactor
There were some unnecessary Cow conversions leftover from the old
nu-path implementation.
* Use canonicalize in source command; Improve errors
Previously, `source` used `expand_path()` which does not follow
symlinks.
As a follow up, I improved the source error messages so they now tell
why the source file could not be canonicalized or read into string.
```
> [
[ msg, labels, span];
["The message", "Helpful message here", ([[start, end]; [0, 141]])]
] | error make
error: The message
┌─ shell:1:1
│
1 │ ╭ [
2 │ │ [ msg, labels, span];
3 │ │ ["The message", "Helpful message here", ([[start, end]; [0, 141]])]
│ ╰─────────────────────────────────────────────────────────────────────^ Helpful message here
```
Adding a more flexible approach for creating error values. One use case, for instance is the
idea of a test framework. A failed assertion instead of printing to the screen it could create
tables with more details of the failed assertion and pass it to this command for making a full
fledge error that Nu can show. This can (and should) be extended for capturing error values as well
in the pipeline. One could also use it for inspection.
For example: `.... | error inspect { # inspection here }`
or "error handling" as well, like so: `.... | error capture { fix here }`
However, we start here only with `error make` that creates an error value for you with limited support for the time being.
* Add subcommand `into filesize`
It's currently not possible to convert a number or a string containing a number
into a filesize. The only way to create an instance of filesize type today is
with a literal in nushell syntax. This commit adds the `into filesize`
subcommand so that file sizes can be created from the outputs of programs
producing numbers or strings, like standard unix tools.
There is a limitation with this - it doesn't currently parse values like `10 MB`
or `10 MiB`, it can only look at the number itself. If the desire is there, more
flexible parsing can be added.
* fixup! Add subcommand `into filesize`
* fixup! Add subcommand `into filesize`
* feat: spawn the executables directly if possible
This pull request changes nu-command so that it spawns the process directly if:
- They are a `.exe` on Windows
- They are not a `.sh` or `.bash` on not windows.
Benefits:
- As I explained in [this comment](https://github.com/nushell/nushell/issues/3898#issuecomment-894000812), this is another step towards making Nushell a standalone shell, that doesn't need to shell out unless it is running a script for a particular shell (cmd, sh, ps1, etc.).
- Fixes the bug with multiline strings
- Better performance due to direct spawning.
For example, this script shows ~20 ms less latency.
After:
```nu
C:\> benchmark { node -e 'console.log("sssss")' }
───┬──────────────────
# │ real time
───┼──────────────────
0 │ 63ms 921us 600ns
───┴──────────────────
```
Before
```nu
C:\> benchmark { node -e 'console.log("sssss")' }
───┬──────────────────
# │ real time
───┼──────────────────
0 │ 79ms 136us 800ns
───┴──────────────────
```
Fixes#3898
* fix: make which dependency optional
Also fixes clippy warnings
* refactor: refactor spawn_exe, spawn_cmd, spawn_sh, and spawn_any
* fix: use which feature instead of which-support
* fix: use which_in to use the cwd of nu
* fix: use case insensitive comparison of the extensions
Sometimes the case of the extension is uppercased by the "which_in" function
Also use unix instead of not windows. Some os might not have sh support
* Resolve rebase artifacts
* Remove leftover dependencies on removed feature
* Remove unnecessary 'pub'
* Start taking notes and fooling around
* Split canonicalize to two versions; Add TODOs
One that takes `relative_to` and one that doesn't.
More TODO notes.
* Merge absolutize to and rename resolve_dots
* Add custom absolutize fn and use it in path expand
* Convert a couple of dunce::canonicalize to ours
* Update nu-path description
* Replace all canonicalize with nu-path version
* Remove leftover dunce dependencies
* Fix broken autocd with trailing slash
Trailing slash is preserved *only* in paths that do not contain "." or
"..". This should be fixed in the future to cover all paths but for now
it at least covers basic cases.
* Use dunce::canonicalize for canonicalizing
* Alow cd recovery from non-existent cwd
* Disable removed canonicalize functionality tests
Remove unused import
* Break down nu-path into separate modules
* Remove unused public imports
* Remove abundant cow mapping
* Fix clippy warning
* Reformulate old canonicalize tests to expand_path
They wouldn't work with the new canonicalize.
* Canonicalize also ~ and ndots; Unify path joining
Also, add doc comments in nu_path::expansions.
* Add comment
* Avoid expanding ndots if path is not valid UTF-8
With this change, no lossy path->string conversion should happen in the
nu-path crate.
* Fmt
* Slight expand_tilde refactor; Add doc comments
* Start nu-path integration tests
* Add tests TODO
* Fix docstring typo
* Fix some doc strings
* Add README for nu-path crate
* Add a couple of canonicalize tests
* Add nu-path integration tests
* Add trim trailing slashes tests
* Update nu-path dependency
* Remove unused import
* Regenerate lockfile
* chore: Replace surf with reqwest
Removes a lot of older, duplication versions of some dependencies
(roughtly 90 dependencies removed in total)
* chore: Remove syn 0.11
* chore: Remove unnecessary features from ptree
Removes some more duplicate dependencies
* cargo update
* Ensure we run the fetch and post plugins on the tokio runtime
* Fix clippy warning
* fix: Github requires a user agent on requests
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Allow different names for ...rest
* Resolves#3945
* This change requires an explicit name for the rest argument in `WholeStreamCommand`,
which is why there are so many changed files.
* Remove redundant clone
* Add tests
* Allow environment variables to be hidden
This change allows environment variables in Nushell to have a value of
`Nothing`, which can be set by the user by passing `$nothing` to
`let-env` and friends.
Environment variables with a value of Nothing behave as if they are not
set at all. This allows a user to shadow the value of an environment
variable in a parent scope, effectively removing it from their current
scope. This was not possible before, because a scope can not affect its
parent scopes.
This is a workaround for issues like #3920.
Additionally, this allows a user to simultaneously set, change and
remove multiple environment variables via `load-env`. Any environment
variables set to $nothing will be hidden and thus act as if they are
removed. This simplifies working with virtual environments, which rely
on setting multiple environment variables, including PATH, to specific
values, and remove/change them on deactivation.
One surprising behavior is that an environment variable set to $nothing
will act as if it is not set when querying it (via $nu.env.X), but it is
still possible to remove it entirely via `unlet-env`. If the same
environment variable is present in the parent scope, the value in the
parent scope will be visible to the user. This might be surprising
behavior to users who are not familiar with the implementation details.
An additional corner case is the the shorthand form of `with-env` does
not work with this feature. Using `X=$nothing` will set $nu.env.X to the
string "$nothing". The long-form works as expected: `with-env [X
$nothing] {...}`.
* Remove unused import
* Allow all primitives to be convert to strings
Given we can write nu scripts. As the codebase grows, splitting into many smaller nu scripts is necessary.
In general, when we work with paths and files we seem to face quite a few difficulties. Here we just tackle one of them and it involves sourcing
files that also source other nu files and so forth. The current working directory becomes important here and being on a different directory
when sourcing scripts will not work. Mostly because we expand the path on the current working directory and parse the files when a source command
call is done.
For the moment, we introduce a `lib_dirs` configuration value and, unfortunately, introduce a new dependency in `nu-parser` (`nu-data`) to get
a handle of the configuration file to retrieve it. This should give clues and ideas as the new parser engine continues (introduce a way to also know paths)
With this PR we can do the following:
Let's assume we want to write a nu library called `my_library`. We will have the code in a directory called `project`: The file structure will looks like this:
```
project/my_library.nu
project/my_library/hello.nu
project/my_library/name.nu
```
This "pattern" works well, that is, when creating a library have a directory named `my_library` and next to it a `my_library.nu` file. Filling them like this:
```
source my_library/hello.nu
source my_library/name.nu
```
```
def hello [] {
"hello world"
}
```
```
def name [] {
"Nu"
end
```
Assuming this `project` directory is stored at `/path/to/lib/project`, we can do:
```
config set lib_dirs ['path/to/lib/project']
```
Given we have this `lib_dirs` configuration value, we can be anywhere while using Nu and do the following:
```
source my_library.nu
echo (hello) (name)
```
* Allow sourcing paths with emojis
* Add source command tests for emoji paths
* Fmt
* Disable source tests on Windows with illegal paths
* Test sourcing also ASCII and single-quoted paths
We introduce it here and allow it to work with regular lists (tables with no columns) as well as symmetric tables. Say we have two lists and wish to zip them, like so:
```
[0 2 4 6 8] | zip {
[1 3 5 7 9]
} | flatten
───┬───
0 │ 0
1 │ 1
2 │ 2
3 │ 3
4 │ 4
5 │ 5
6 │ 6
7 │ 7
8 │ 8
9 │ 9
───┴───
```
In the case for two tables instead:
```
[[symbol]; ['('] ['['] ['{']] | zip {
[[symbol]; [')'] [']'] ['}']]
} | each {
get symbol | $'($in.0)nushell($in.1)'
}
───┬───────────
0 │ (nushell)
1 │ [nushell]
2 │ {nushell}
───┴───────────
```
* Mitigate history file bug in Rustyline
Rustyline's duplicate ignoring code has a bug that can cause data loss and
history file corruption. Testing seems to indicate that disabling this behavior
and allowing duplicates will prevent the bug from showing up. Many people have
complained about this issue, I think it is worthwhile to fix the bug at the cost
of permitting duplicate history entries.
Upstream bug: https://github.com/kkawakam/rustyline/issues/559
* Increase Rustyline historyfile limit
Rustyline will only store 100 history items by default. This is quite a small
limit for a shell that people use as a daily driver. Especially when the
deduplication code is removed, we will hit that limit quickly and start to lose
history. This commit bumps the limit up to 10k. We can discuss if this is an
inappropriate limit or if we should allow users to specify this setting in their
nushell config file instead.
We very well support `nth 0 2 3 --skip 1 4` to select particular rows and skip some using a flag. However, in practice we deal with tables (whether they come from parsing or loading files and whatnot) where we don't know the size of the table up front (and everytime we have these, they may have different sizes). There are also other use cases when we use intermediate tables during processing and wish to always drop certain rows and **keep the rest**.
Usage:
```
... | drop nth 0
... | drop nth 3 8
```
The nu-serde crate allows us to become much more generic with respect to how we
convert output to `nu-protocol::Value`s. This allows us to remove a lot of the
special-case code that we wrote for deserializing JSON values.
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Add the nu-serde crate
nu-serde is a crate that can be used to turn a value implementing
`serde::Serialize` into a `nu-protocol::Value`. This has the potential to
significantly simplify plugin authorship.
This crate was the previously independent
[serde-nu](https://github.com/lily-mara/serde-nu) but the nushell maintainers
expressed an interest in having it added to the mainline nushell repository.
* fixup! Add the nu-serde crate
Some environment variables, such as `RUST_LOG` include equals signs. Nushell
should support this in the shorthand environment variable syntax so that
developers using these variables can control them easily. We accomplish this by
swapping `std::str::split` for `std::str::splitn`, which ensures that we only
consider the first equals sign in the string instead of all of them, which we
did previously.
Closes#3867
* Adding parse fix for power operator error on negative integers and decimal
* Adding correct formatting
* Changed is negative check to follow conventions
* Adding tests
* Added fix for the negatives and added tests
* Removed comments
* nuframe in its own type in UntaggedValue
* Removed eager dataframe from enum
* Dataframe created from list of values
* Corrected order in dataframe columns
* Returned tag from stream collection
* Removed series from dataframe commands
* Arithmetic operators
* forced push
* forced push
* Replace all command
* String commands
* appending operations with dfs
* Testing suite for dataframes
* Unit test for dataframe commands
* improved equality for dataframes
* moving all dataframe operations to protocol
* objects in dataframes
* Removed cloning when converting to row
* Refactor Hash code to simplify md5 and sha256 implementations
Md5 and Sha256 (and other future digests) require less boilerplate code
now. Error reporting includues the name of the hash again.
* Add missing hash sha256 test
This brings the features used by the `nu_plugin_fetch` and
`nu_plugin_post` in line and drops the default-features, reducing
the number of pulled-in dependencies and avoiding a second round of
compilations.
Retry of #3777 but with different features, post and fetch plugin tested
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Select used to ignore absent values resulting in "squashing" where
columns for multiple rows could be squashed into a single row.
This fixes the problem by inserting null/nothing into absent value, thus
preserving the structure of rows. This makes sure that all selected
columns are present in each row.
* nuframe in its own type in UntaggedValue
* Removed eager dataframe from enum
* Dataframe created from list of values
* Corrected order in dataframe columns
* Returned tag from stream collection
* Removed series from dataframe commands
* Arithmetic operators
* forced push
* forced push
* Replace all command
* String commands
* appending operations with dfs
* Testing suite for dataframes
* Unit test for dataframe commands
* improved equality for dataframes
* moving all dataframe operations to protocol
Hashers now uses on Rust Crypto Digest trait which makes it trivial to
implement additional hash functions.
The original `md5` crate does not implement the Digest trait and was
replaced by `md-5` crate which does. Sha256 uses already included `sha2`
crate.
* nuframe in its own type in UntaggedValue
* Removed eager dataframe from enum
* Dataframe created from list of values
* Corrected order in dataframe columns
* Returned tag from stream collection
* Removed series from dataframe commands
* Arithmetic operators
* forced push
* forced push
* Replace all command
* String commands
* appending operations with dfs
* Testing suite for dataframes
* Unit test for dataframe commands
* improved equality for dataframes
* Read from standard input in `rm`
With this change, rm falls back to reading from the standard input if no
arguments are supplied. This leads to more intuitive pipes as seen in
https://github.com/nushell/nushell/issues/2824
ls | get name | sort-by | first 20 | each {rm $it} becomes
ls | get name | sort-by | first 20 | rm
* [Fix] Run cargo fmt, make files a rest parameter, and fix cargo build warnings
* [Fix] Fix clippy suggestions
* Fix swapped PATH env var separators
* Support pathvar to manipulate other vars than PATH
* Add tests for pathvar and its subcommands
* Adjust pathvar tests to comply with env quirks
* Make pathvar tests work on non-Windows as well
* Compact the comments in pathvar tests
* Fix last failing test
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
This allows converting strings to filepaths without having to use
`path expand` roundtrip.
Filepaths are taken as-is without any validation/conversion.
* Fix swapped PATH env var separators
* Support pathvar to manipulate other vars than PATH
* Add tests for pathvar and its subcommands
* Fix PATH env name for Windows
Seems like Windows uses PATH as well.
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
Remove the job in release workflow to publish to winget.
Trigger winget workflow on published release.
Co-authored-by: Alexandre Nedelec <Alexandre.Nedelec@azeo.com>
This brings the features used by the `nu_plugin_fetch` and
`nu_plugin_post` in line and drops the default-features, reducing
the number of pulled-in dependencies and avoiding a second round of
compilations.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
* kind of works but not what we really want
* updated `into binary` and `first` to work better together
* attempt to fix wasm build problem
* attempt #2 to fix wasm stuff
This brings with it a reduction in the number of duplicated
dependencies that it has and the overhead it imposes on our
build.
The number of crates that need to be built for
`cargo build --features extra` drops by roughly 50.
On Windows, we used the `is-exeuctable` crate but on Unix, we
duplicated the check that it did, with one difference: We also
looked at whether or not it was a symlink.
The `is-executable` crate uses `std::fs::metadata` which follows
symlinks, so this scenario should never occur here, as it will
return the metadata for the target file.
Using the `is-executable` crate on both Unix and Windows lets us
make it non-optional. This lets us remove the `executable-support`
feature. (It is worth noting that this code didn't compile on
Windows when the `executable-support` feature was not specified.)
Right now, there is an alternate code path for `target_arch` being
`wasm32`. This isn't exactly correct as it should probably handle
something different for when the `target_os` is `wasi`.
Nothing used the `ptree` feature or optional dependency within
`nu-command` except to include it within the `version` output. This
may be related to when `nu-cli` also had a `ptree` feature, but
I'm not sure.
That leaves the code within `nu_plugin_tree` as the sole remaining
user of `ptree`, which is already covered by the feature `tree`
and included in the `version` output.
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* changes in series castings to allow other types
* Clippy error correction
* Removed lists from command signatures
* Added not command for series
* take command with args
* set with idx command
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* changes in series castings to allow other types
* Clippy error correction
* Removed lists from command signatures
* Added not command for series
Seems we do `ctrl` feature checks in `nu-cli` and `nu-command`. We should find a better way to report the enabled features un the `version` command without using the conditionals (or somewhere else)
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* changes in series castings to allow other types
* Clippy error correction
Added test cases that ensure that special characters in path names are passed
to external commands correctly. These cases have been implemented with rstest
to reuse existing test code.
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
* Correct float operations
* Add paste command
* fix build and format failures
* Add examples
* Make tests pass
* Format
* add cfg annotation for Clip
* format code
* remove additional import for clip
* Remove test
* Type in command description
* filter name change
* Clean column name
* Clippy error and updated polars version
* Lint correction in file
* CSV Infer schema optional
In Nu we have variables (E.g. $var-name) and these contain `Value` types.
This means we can bind to variables any structured data and column path syntax
(E.g. `$variable.path.to`) allows flexibility for "querying" said structures.
Here we offer completions for these. For example, in a Nushell session the
variable `$nu` contains environment values among other things. If we wanted to
see in the screen some environment variable (say the var `SHELL`) we do:
```
> echo $nu.env.SHELL
```
with completions we can now do: `echo $nu.env.S[\TAB]` and we get suggestions
that start at the column path `$nu.env` with vars starting with the letter `S`
in this case `SHELL` appears in the suggestions.
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* Fix Running echo .. starts printing integers forever
* Fixed panic on operations with very large durations
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* plugin: basic from_mp4 implementation
This patch introduces a very basic implementation of from_mp4, with only
a few bits of meta-data available. The rest of the available meta-data
(which is more than half left), will be included in a later patch
* Mp4: Almost all track metadata is implemented
Only meta-data that is not implemented is duration, facing some weird
issue I am going to check on later
* Mp4: All meta-data fields implemented
All meta-data fields that can be retrieved are now retrieved, with the
exception of duration for both tracks and the entire file itself because
there is still an issue. However, that will be fixed in the upcoming
patches
* fix: UntaggedValue::duration() serializes correctly now
Previous to this patch, there was an issue where when you would use
UntaggedValue::duration() it would result in an invalid JSONRPC
resulting string when using the protocol. This patch fixes this issue
* Mp4: Duration fixed for file and tracks
* plugins: Add plugin extra to src/plugins
* Mp4: Replace unwrap() with expect()
* Fix: Remove test mp4 file
We've relied on `clap` for building our cli app bootstrapping that figures out the positionals, flags, and other convenient facilities. Nu has been capable of solving this problem for quite some time. Given this and much more reasons (including the build time caused by `clap`) we start here working with our own.
* enable theming of the command line syntax
* added missing flatshape, sorted flatshapes for easier reading.
* sorted flat shapes again and saved it this time
* added sample rwb.json syntax them file to docs
* Fix and clarify description of 'exec'
Most importantly, I added the information that it replaces the current
process.
* Convert exec to OutputStream; Remove unused trait
* Remove dead code & unused imports on non-unix
* Sample command
* Join command with checks
* More dataframes commands
* Groupby and aggregate commands
* Missing feature dataframe flag
* Renamed file
* New commands for dataframes
* error parser and df reference
* filter command for dataframes
* removed name from nu_dataframe
* commands to save to parquet and csv
* polars new version
* new dataframe commands
* series type and print
* Series basic arithmetics
* Add new column to dataframe
* Command names changed to nushell standard
* Throw an error if path failed to expand
Previously, it just repeated the non-expanded path.
* Allow expanding non-existent paths
This commit has a strange error in examples.
* Specify span manually in examples; Add an example
* Expand relative path without requiring cwd
* Remove redundant tilde expansion
This makes the tilde expansion in relative paths dependant on "dirs"
feature.
* Add missing example result
* Adjust path expand description
* Fix import error with missing feature
Previous to this commit, the sysinfo crate would show blank `brand` for
Apple M1 architectures whenever you would run `sys | get cpu`.
I have fixed the issue in sysinfo, so bumping the dependency version to 0.18.2
means brand now is retrieved successfully on M1 architectures.
Changes:
* Bug fix - bat adds markers only when a file path is passed and it can use git2
on it. It doesn't add markers when bytes are passed. Hence, the code is
adjusted accordingly. The sideeffect is files being opened multiple
times and its content being unnecessarily loaded in memory.
* Refactoring of the crate - Config is extracted to its struct file.
Repetitive blocks of code are dried and nested conditionals are
flattened.
* Sample command
* Join command with checks
* More dataframes commands
* Groupby and aggregate commands
* Missing feature dataframe flag
* Renamed file
* New commands for dataframes
* error parser and df reference
* filter command for dataframes
* removed name from nu_dataframe
* commands to save to parquet and csv
Using the `*` wildcard should not attempt to delete files with a leading dot
unless the more explicit `.*` is used. `rm *` should also not attempt to delete
the current directory or its parent directory (`.` and `..`). I have resolved
this bug as well in a less satisfactory way. I think it may be the case that we
can only disambiguate the `.` and `..` path segments by using `Path::display`.
Here is a short list of alternatives that I tried:
- `Path::ends_with()` can detect `/..` but not `/.`.
- `Path::iter()` and `Path::components()` leave out `/.`.
- `Path::file_name()` normalizes `/.` to the parent component's file name.
Fixes#3508
* Fix parser expanding dots where it shouldn't
Previously, the parser would expand "a...b" as "a../..b". Now, >2 dots
are only expanded when the whole path component consists of dots (i.e.,
"..." expands to "../.." while "a...b" stays as it is).
* Respect OS separator when expanding >2 dots
"..." now expands to either "../.." or "..\..", based on the host OS.
* Add the load-env command
load-env can be used to add environment variables dynamically via an
InputStream. This allows developers to create tools that output environment
variables as key-value pairs, then have the user load those variables in using
load-env. This supplants most of the need for an `eval` command, which is
mostly used in POSIX envs for setting env vars.
Fixes#3481
* fixup! Add the load-env command
Not all lite command's first part denotes a real command (for cases like sub commands that it's second lite part accounts for the command name). This is important so that we can refer to it's span correctly. Here we fix to include the command's name span correctly whether it's a command or sub command when reporting missing flag errors.
* Allow querying the current path separator
* Convert char command to engine-p
* Wrap char args into struct
* Add --list option to char command
This lists all the available character names, along with the character
and its unicode points.
* commands to engine
* Correction of error in parser
* Added detailed regex error to parse
* better regex error parsing
* clippy corrections
* parse example with test
* secondary error for regex
* removed clone in error parser
* Secondary error message
It was too error prone when positional arguments were used with the rest
arguments. Now, you need to explicitly state from which position you
want to count the rest args (e.g., `rest(0)`).
* Dataframe MVP
* Removed test csv file
* Dataframe MVP
* Removed test csv file
* New revision polars
* New revision polars
* csv file reader
* argument parser for file reader
* Parser from Row primitive
* Column conversion
* Added as f32 and f64
* Parsing row to dataframe
* Removed repeated push to vector
* Accept table values to create dataframe
* Removed default serde
* Dataframe to rows to show data
* Save name of file with dataframe
* Usage example
* Upgrade polars version
* Clippy changes
* Added print function with head and tail
* Move dataframe struct to folder
* Lock file after running tests and merge
* Optional feature for dataframe
* Removed dataframe from plugins
* Update primitive.rs
Co-authored-by: JT <jonathandturner@users.noreply.github.com>
The ps plugin has an unnecessary call to `std:🧵:sleep(500ms)` that
delays runtime by 500ms. Additionally, there is a call to
`sysinfo::SystemExt::refresh_process`, which is not required as the previous
call to sysinfo::SystemExt::refresh_all handles the "refresh" of all processes
without a need to do this individually. Combining both of these improvements
means that running ps runs nearly instentaneously.
Fixes#3402
* Convert "random bool" to engine-p
Also implements FromValue for Tagged<BigDecimal> and Tagged<f64>.
* Convert "random dice" to engine-p
* Convert "random uuid" to engine-p
* Covert "random chars" to engine-p
* Convert "random" command to engine-p
* Implement minmax for Range; Simplify range command
* Port random integer to enginep; New FromValue impl
Now, FromValue is implemented for Tagged<Range> to allow extracting args
into this type.
* Make sure range value extraction fails properly
The range endpoint extraction methods now return error instead of
silently clipping the value. This now makes `random integer ..-4` fail
properly since -4 can't be cast as u64.
* Port random decimal to enginep & Refactor
This added a way to interpret Range limits as f64 and a Primitive helper
to get its value as f64.
A side effect of this commit is that it is now possible to specify the
command bounds as true decimals. E.g., `random decimal 0.0..3.14` does
not clip 3.14 to 3.
* Add first prototype of functionality to parse numbers in parantheses (). Needs testing and more wide-testing+integration
* Fix styling issue
* Try something else by copying existing matching code
* Fix formatting
* Fix the parser to accept numbers in paranthesis. Not really happy with the code, but let's see
* Refactor to only use once the parsing of strings into numbers
* Remove errors that are not used
* Fix formatting
Co-authored-by: Stefan Stanciulescu <contact@stefanstanciulescu.com>
If nu fails to load a user config on startup, no helper is set and the
later call to `rl.helper_mut()` will panic. There may be better ways to
handle this long-term, but printing an error about the failure to parse
the config and then starting with default values seems reasonable.
* Removes arg serialization
* action stream -> output stream
* uses nu_protocol::Range instead of NumericRange
* random missing newline I found in the code
* add nu-pretty-hex, add into binary, update binaryview
* updated parameter name, updated examples
* fixed nu-pretty-hex test
* fixed tests again! and added a no color option to pretty-hex
* Fix array index out of bounds error.
Error occured when computing levenshtein_distance of two strings where
str.len() is not equal to str.chars().collect::<Vec<_>>().len()
* Add test for levenshtein_distance
It compiles and works without errors, but the pager is not asynchronous
anymore (i.e., you need to wait for `seq 1 1000000` to finish before the
pager is displayed).
* Add new path parse subcommand
This includes a slight refactor to all the path subcommand `action()`
functions.
* Remove filestem and extension; Fix example
* Add additional description to path parse
* Put join arg behind flag; Fix missing import (Win)
* Fix error when column path is passed as arg
* Add structured path joining
Structured path is implicitly joined at every patch subcommand call.
* Fix existing path join tests; Fix rustfmt
* Remove redundant 'static lifetime (clippy)
* Add initial impl of path split subcommand
* Add ability to join path from parts
* Fix wrong results in path split examples
* Fix remaining asyncs after engine change
* Do not wrap split path parts into table
When the input is just a list of values, the `path split` command will
split each value directly into the output stream, similar to
`split-row`. Column path--specified values are still wrapped into a
table so they can still be used to replace table fields.
* Join list of values instead of going one-by-one
When `path join` encounters a list of values, it attempts to join them,
instead of going one-by-one like the rest of the path commands. You can
still `each { echo $it | path join }` to join them one-by-one, if the
values are, e.g., tables.
Now, the behavior of `path split` and `path join` should match the
`split-row` and `str collect` counterparts and should hopefully align
better with user's expectations.
* Make sure path join detects structured path
* Fix panic on empty input stream
Also, doesn't collect input into vector unnecessarily.
* Fix path join not appending value
* Remove argument serialization
* Make better errors; Misc refactor
* OsStr -> String encoding is now lossy, instead of throwing an error
* The consequence is action() now always returns Value instead of Result
* Removed redundant handle_value() call in `path join`
* Fix possible incorrect error detection in `path split`
* Applied rustfmt + clippy
* Add more usage, examples & test; Fix type error
The 'parent' column was required to be a path but didn't work with
string.
* Add more help & examples; Maybe fix Windows error
* Refactor operate function
Reducing code repetition
* Review usages and examples
* Add the option to manually specify the extension
* Add more tests; Fix failures on Windows
* Move path commands to engine-p
* Small refactor
* add query json plugin for experimentation
* add some error handling
* closer but Kind::Array is still horked
* unravel the table so the output looks right
* clippy
* added the ability to use gjson modifiers
* Add iter-extensions
* Move all to enginep style
* Remove iter extensions
* Fix clippy lints
* Add comment and make ? more visible
* Remove try_all
* Remove all because it cant return err
With the current code it is possible to attach custom commands from
a custom binary, but only for interactive mode. This change makes
it possible to also customize the evaluation context for commands
and scripts.
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* converted math commands to outputstream and new method for arg evaluation
* fmt
* clippy
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
If built without `trash_support`, nu should explicitly reject attempts to use `rm` with the `--trash` option, or with a config file which includes `rm_always_trash = true`.
As of 42fac72, there doesn't seem to be any guard in the `#[cfg(not(feature = "trash-support"))]` block of `filesystem_shell::rm`, leading to the behavior described in #3116, where builds without the trash-support feature will delete things permanently regardless of flags/config options.
This should close#3116
* Use ctx.configs in all config commands
* Remove all setting/accessing of vars.("config-path")
* Add tests
* Add comment
* Reload cfg on remove
* Hypocratic ws change
* Use history_path in hist_or_default
* Make clippy happy
* Fix rebase stuff
* Fix clippy lint
Before storing an entry into the history nushell will check if the entry
consists only of whitespaces and if so, it does not store it in the history and
this avoids newline repetition when user is navigating in the history.
* add support for timestamp-based time conversion by specifing timezone or 'UTC/Local'
* [fix] fix the wrong test sample
* code formating
* code formating and import missing mod to test
* code formating again
* [fix] it won't crash when given timestamp is too big.
* [fix] code formatting =_=b
* commands: any? all?
We can check if `any` (or `all`) rows of tables match predicates.
Small `all?` example: Given the following table with `services` running:
```
> echo [[status]; [UP] [UP]]
───┬────────
# │ status
───┼────────
0 │ UP
1 │ UP
───┴────────
```
We can ask if all services are UP, like so:
```
> echo [[status]; [UP] [UP]] | all? status == UP
true
```
* Fix any? signature.
* Output error when ls into a file without permission
* math sqrt
* added test to check fails when ls into prohibited dir
* fix lint
* math sqrt with tests and doc
* trigger wasm build
* Update filesystem_shell.rs
* always forgetting the linting
* fix clippy complaining
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Output error when ls into a file without permission
* added test to check fails when ls into prohibited dir
* fix lint
* trigger wasm build
* be able to remove fifos
* Update filesystem_shell.rs
* I thought windows had fifos
* fixed unix and windows conditional compilation
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Output error when ls into a file without permission
* added test to check fails when ls into prohibited dir
* fix lint
* trigger wasm build
* Update filesystem_shell.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Revert "History, more test coverage improvements, and refactorings. (#3217)"
This reverts commit 8fc8fc89aa.
* Add tests
* Refactor .nu-env
* Change logic of Config write to logic of read()
* Fix reload always appends to old vars
* Fix reload always takes last_modified of global config
* Add reload_config in evaluation context
* Reload config after writing to it in cfg set / cfg set_into
* Add --no-history to cli options
* Use --no-history in tests
* Add comment about maybe_print_errors
* Get ctrl_exit var from context.global_config
* Use context.global_config in command "config"
* Add Readme in engine how env vars are now handled
* Update docs from autoenv command
* Move history_path from engine to nu_data
* Move load history out of if
* No let before return
* Add import for indexmap
* enable ability to see all aliases, pull in code from scope branch
* add in the alias tests
* add back in my changes to variables.rs after merging in andrasios changes from PR #3217
Improvements overall to Nu. Also among the changes here, we can also be more confident towards incorporating `3041`. End to end tests for checking envs properly exported to externals is not added here (since it's in the other PR)
A few things added in this PR (probably forgetting some too)
* no writes happen to history during test runs.
* environment syncing end to end coverage added.
* clean up / refactorings few areas.
* testing API for finer control (can write tests passing more than one pipeline)
* can pass environment variables in tests that nu will inherit when running.
* No longer needed.
* no longer under a module. No need to use super.
* add ability to cd to ~/blah. tested on windows.
* added dirs_next
* put change behind feature for linux-minimal/wasm
* clippy
* holy crap minimal, i'm about done with you!
* add support for timestamp-based time conversion by specifing timezone or 'UTC/Local'
* [fix] fix the wrong test sample
* code formating
* code formating and import missing mod to test
* code formating again
the initial setup-commands of nushell were executed without loading environment variables
this resulted in the PATH not being available at this point until an external command was run once
which resulted in env_vars being added
let run_result = run_block(&prompt_block, &context, InputStream::empty()).await;
Co-authored-by: alexhk <alexhk@protonmail.com>
While the "main" separator in Windows is the backslash, it supports the
forward slash as a separator too.
Add support for this so that the behavior is similar to the way Windows
PowerShell handles the forward slash: it is recognized as a separator,
and when using <tab> for path completion the slash is reversed.
* Playground infraestructure (tests, etc) additions.
A few things to note:
* Nu can be started with a custom configuration file (`nu --config-file /path/to/sample_config.toml`). Useful for mocking the configuration on test runs.
* When given a custom configuration file Nu will save any changes to the file supplied appropiately.
* The `$nu.config-path` variable either shows the default configuration file (or the custom one, if given)
* We can now run end to end tests with finer grained control (currently, since this is baseline work, standard out) This will allow to check things like exit status, assert the contents with a format, etc)
* Remove (for another PR)
* Make opening a directory enter it.
Not sure if this change is wanted, but I'm not sure what else opening a directory could mean.
And I find myself accidentally using `open <dir>` to mean `enter <dir>`
* Add example to open directory
* Open dir should list it's contents
* Update example description and fix style
* update docs to refer to length instead of count
* rename count to length
* change all occurrences of 'count' to 'length' in tests
* format length command
* Move run_script to engine
* Add which dep and feature to engine
* Change unwrap to expect
* Add wasm specification
* Remove which from default, add specification correctly
* Add nu-platform-specifics
* Move is_external_cmd to platform_specifics
* Add is_external_cmd to host and use it instead of nu_platform directly
* Clean up if else logic in is_external_cmd
* Bump nu-platform-specifics version
* Pass context to print_err
* Commit cargo.lock
* Move print functions to own module inside nu-engine
* Hypocratic change to run windows-nightly again
* Add import for Ordering
* Move printing of error to host
* Move platform specific which functionality to basic host
* Allow no use of cmd_name
* Fix windows compile issue
For now the trash doesn't work because the trash-support flag isn't enabled in nu-engine
crate, so make it work by adding this flag.
Signed-off-by: Tw <wei.tan@intel.com>
Co-authored-by: Tw <wei.tan@intel.com>
* Split help message into brief and full help
Demonstrate on ansi command
Brief help is printed when running `help commands` so it doesn't clutter
the table. Full help is printed when normal help message is requested
(e.g., `help ansi`, `ansi --help`, etc.).
* Split long command descriptions
Some are not split, just edited to be shorter.
* Capitalize the usage of all commands
* Make sure every usage ends with dot
* Fix random typo
* use the InputHandler functionality from minus
* respond to Q and ESC character to quit
* use arijit79/minus main branch until new release is pushed
* rename NushellMinusInputHandler to MinusInputHandler
* Refactor path subcommand argument handling
DefaultArguments are no longer passed to each subcommand. Instead, each
subcommand has its own Path<xxx>Arguments. This means that it is no
longer necessary to edit every single path subcommand source file when
changing the arguments struct.
* Add new path join subcommand
Makes it easier to create new paths. It's just a wrapper around Rust's
Path.join().
* Add option to invert match command selection
* Fix rustfmt error
* Rename match --exclude to --invert
To be more descriptive and conform to e.g. grep or ripgrep -v flag.
Also simplified the --invert flag description.
* Fix formatting when description got shorter
Co-authored-by: Jakub Žádník <jakub.zadnik@tuni.fi>
* This adds table paging, relying on minus to perform the paging functionality
This is gated behind the table-pager feature
* fix problem with long running InputStreams blocking table() returning
* some comments regarding Arc clones, and callback from minus
* fix case where parent_name was {nu, term} and possibly others in the future by doing an extra test first to see if if the *parent_name key actually exists in cmap
* update with help generate_docs testing
`drop` is used for removing the last row. Passing a number allows dropping N rows.
Here we introduce the same logic for dropping columns instead.
You can certainly remove columns by using `reject`, however, there could be cases
where we are interested in removing columns from tables that contain, say, a big
number of columns. Using `reject` becomes impractical, especially when you don't
care about the column names that could either be known or not known when exploring
tables.
```
> echo [[lib, extension]; [nu-core, rs] [rake, rb]]
─────────┬───────────
lib │ extension
─────────┼───────────
nu-core │ rs
rake │ rb
─────────┴───────────
```
```
> echo [[lib, extension]; [nu-core, rs] [rake, rb]] | drop column
─────────
lib
─────────
nu-core
rake
─────────
```
There are many use cases. Here we introduce the following:
- The rows can be rolled `... | roll` (up) or `... | roll down`
- Columns can be rolled too (the default is on the `left`, you can pass `... | roll column --opposite` to roll in the other direction)
- You can `roll` the cells of a table and keeping the header names in the same order (`... | roll column --cells-only`)
- Above examples can also be passed (Ex. `... | roll down 3`) a number to tell how many places to roll.
Basic working example with rolling columns:
```
> echo '00000100'
| split chars
| each { str to-int }
| rotate counter-clockwise _
| reject _
| rename bit1 bit2 bit3 bit4 bit5 bit6 bit7 bit8
───┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────
# │ bit1 │ bit2 │ bit3 │ bit4 │ bit5 │ bit6 │ bit7 │ bit8
───┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────
0 │ 0 │ 0 │ 0 │ 0 │ 0 │ 1 │ 0 │ 0
───┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────
```
We want to "shift" three bits to the left of the bitstring (four in decimal), let's try it:
```
> echo '00000100'
| split chars
| each { str to-int }
| rotate counter-clockwise _
| reject _
| rename bit1 bit2 bit3 bit4 bit5 bit6 bit7 bit8
| roll column 3
───┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────
# │ bit4 │ bit5 │ bit6 │ bit7 │ bit8 │ bit1 │ bit2 │ bit3
───┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────
0 │ 0 │ 0 │ 1 │ 0 │ 0 │ 0 │ 0 │ 0
───┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────
```
The tables was rolled correctly (32 in decimal, for above bitstring). However, the *last three header names* look confusing.
We can roll the cell contents only to fix it.
```
> echo '00000100'
| split chars
| each { str to-int }
| rotate counter-clockwise _
| reject _
| rename bit1 bit2 bit3 bit4 bit5 bit6 bit7 bit8
| roll column 3 --cells-only
───┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────
# │ bit1 │ bit2 │ bit3 │ bit4 │ bit5 │ bit6 │ bit7 │ bit8
───┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────
0 │ 0 │ 0 │ 1 │ 0 │ 0 │ 0 │ 0 │ 0
───┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────
```
There we go. Let's compute it's decimal value now (should be 32)
```
> echo '00000100'
| split chars
| each { str to-int }
| rotate counter-clockwise _
| reject _
| roll column 3 --cells-only
| pivot bit --ignore-titles
| get bit
| reverse
| each --numbered { = $it.item * (2 ** $it.index) }
| math sum
32
```
* remove parking_lot crate from nu-data as it is no longer being used
* remove commented out code from parse.rs
* remove commented out code from scope.rs
The autoenv logic mutates environment variables in the running session as
it operates and decides what to do for trusted directories containing `.nu-env`
files. Few of the ways to interact with it were all in a single test function.
We separate out all the ways that were done in the single test function to document
it better. This will greatly help once we start refactoring our way out from setting
environment variables this way to just setting them to `Scope`.
This is part of an on-going effort to keep variables (`PATH` and `ENV`)
in our `Scope` and rely on it for everything related to variables.
We expect to move away from setting (`std::*`) envrironment variables in the current
running process. This is non-trivial since we need to handle cases from vars
coming in from the outside world, prioritize, and also compare to the ones
we have both stored in memory and in configuration files.
Also to send out our in-memory (in `Scope`) variables properly to external
programs once we no longer rely on `std::env` vars from the running process.
* Use expand_path to handle the path including tilda
* Publish path::expand_path for using in nu-command
* cargo fmt
Co-authored-by: Wataru Yamaguchi <nagisamark2@gmail.com>
* Move tests into own file
* Move data structs to own file
* Move functions parsing 1 Token (primitives) into own file
* Rename param_flag_list to signature
* Add tests
* Fix clippy lint
* Change imports to new lexer structure
Before, ps would not insert a value if the process didn't have a parent.
Now, ps will insert an empty cell. This caused broken tables as some
rows didn't have all the columns.
* Document the lexer and lightly improve its names
The bulk of this pull request adds a substantial amount of new inline
documentation for the lexer. Along the way, I made a few minor changes
to the names in the lexer, most of which were internal.
The main change that affects other files is renaming `group` to `block`,
since the function is actually parsing a block (a list of groups).
* Further clean up the lexer
- Consolidate the logic of the various token builders into a single type
- Improve and clean up the event-driven BlockParser
- Clean up comment parsing. Comments now contain their original leading
whitespace as well as trailing whitespace, and know how to move some
leading whitespace back into the body based on how the lexer decides
to dedent the comments. This preserves the original whitespace
information while still making it straight-forward to eliminate leading
whitespace in help comments.
* Update meta.rs
* WIP
* fix clippy
* remove unwraps
* remove unwraps
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
Co-authored-by: Jonathan Turner <jonathan.d.turner@gmail.com>
* standardize on how to get file size
* forgot to remove comment
* make specified size lowercase
* fix the test due to precision
* added another test
* Update README.md
add contributors graphic
* clippy - test adjustment
* tweaked matching
- Disable shadow-rs (libgit2-sys compilation on WASI fails for various strange reasons, so seems easier to disable altogether for now).
- Disable directories-support (WASI doesn't have concept of user directory and such calls fail at runtime).
* Add possibility to declare optional parameters and switch flags
With this commit applied it is now possible to specify optional parameters and flags
as switches. This PR **only** makes guarantees about **parsing** optional flags and
switches correctly. This PR **does not guarantee flawless functionality** of
optional parameters / switches within scripts.
functionality within scripts. Example:
test.nu
```shell
def my_command [
opt_param?
opt_param2?: int
--switch
] {echo hi nushell}
```
```shell
> source test.nu
> my_command -h
───┬─────────
0 │ hi
1 │ nushell
───┴─────────
Usage:
> my_command <mandatory_param> (opt_param) (opt_param2) {flags}
Parameters:
<mandatory_param>
(opt_param)
(opt_param2)
Flags:
-h, --help: Display this help message
--switch
--opt_flag <any>
```
* Update def docs
* Add rest arg to def
This commit applied adds the ability to define the rest parameter of a def
command. It does not implement the functionality to expand the rest argument in
a user defined def function.
The rest argument has to be exactly worded "...rest".
Example after this PR is applied:
file test.nu
```shell
def my_command [
...rest:int # My rest arg
] {
echo 1 2 3
}
```
```shell
> source test.nu
> my_command -h
Usage:
> my_command ...args {flags}
Parameters:
...args: My rest arg
Flags:
-h, --help: Display this help message
```
* Fix space in help on wrong side
* Remove wrong test case
* Parse long and shortflags without space correctly
* Update param_flag_list.rs
* Update param_flag_list.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* move commands, futures.rs, script.rs, utils
* move over maybe_print_errors
* add nu_command crate references to nu_cli
* in commands.rs open up to pub mod from pub(crate)
* nu-cli, nu-command, and nu tests are now passing
* cargo fmt
* clean up nu-cli/src/prelude.rs
* code cleanup
* for some reason lex.rs was not formatted, may be causing my error
* remove mod completion from lib.rs which was not being used along with quickcheck macros
* add in allow unused imports
* comment out one failing external test; comment out one failing internal test
* revert commenting out failing tests; something else might be going on; someone with a windows machine should check and see what is going on with these failing windows tests
* Update Cargo.toml
Extend the optional features to nu-command
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Put parse_definition related funcs into own module
* Add failing lexer test
* Implement Parsing of definition signature
This commit applied changes how the signature of a function is parsed. Before
there was a little bit of "quick-and-dirty" string-matching/parsing involved.
Now, a signature is a little bit more properly parsed.
The grammar of a definition signature understood by these parsing-functions is
as follows:
`[ (parameter | flag | <eol>)* ]`
where
parameter is:
`name (<:> type)? (<,> | <eol> | (#Comment <eol>))?`
flag is:
`--name (-shortform)? (<:> type)? (<,> | <eol> | (#Comment <eol>))?`
(Note: After the last item no <,> has to come.)
Note: It is now possible to pass comments to flags and parameters
Example:
[
d:int # The required d parameter
--x (-x):string # The all powerful x flag
--y (-y):int # The accompanying y flag
]
(Sadly there seems to be a bug (Or is this expected behaviour?) in the lexer, because of which `--x(-x)` would
be treated as one baseline token and is therefore not correctly recognized as 2. For
now a space has to be inserted)
During the implementation of the module, 2 question arose:
Should flag/parameter names be allowed to be type names?
Example case:
```shell
def f [ string ] { echo $string }
```
Currently an error is thrown
* Fix clippy lints
* Remove wrong comment
* Add spacing
* Add Cargo.lock
* move basic_shell_manager to nu-engine
* move basic_evaluation_context to nu-engine
* fix failing test in feature which commands/classified/external.rs
We split off the evaluation engine part of nu-cli into its own crate. This helps improve build times for nu-cli by 17% in my tests. It also helps us see a bit better what's the core engine portion vs the part specific to the interactive CLI piece.
There's more than can be done here, but I think it's a good start in the right direction.
* Obay precedence rules in which; Fix#2875
Before which did not obay the precedence of alias before def commands.
Furthermore, `which -a echo` would only report either an alias or a def command or an
internal command with the provided name. Not all.
With this commit applied its fixed :)
Example:
```shell
/home/leo/repos/nushell(fix/which_reports_wrong_usage)> def echo [] {^echo hi}
/home/leo/repos/nushell(fix/which_reports_wrong_usage)> echo
hi
/home/leo/repos/nushell(fix/which_reports_wrong_usage)> which -a echo
───┬──────┬──────────────────────────┬─────────
# │ arg │ path │ builtin
───┼──────┼──────────────────────────┼─────────
0 │ echo │ Nushell custom command │ No
1 │ echo │ Nushell built-in command │ Yes
2 │ echo │ /usr/bin/echo │ No
───┴──────┴──────────────────────────┴─────────
/home/leo/repos/nushell(fix/which_reports_wrong_usage)> alias echo = ^echo hi there
/home/leo/repos/nushell(fix/which_reports_wrong_usage)> echo
hi there
/home/leo/repos/nushell(fix/which_reports_wrong_usage)> which -a echo
───┬──────┬──────────────────────────┬─────────
# │ arg │ path │ builtin
───┼──────┼──────────────────────────┼─────────
0 │ echo │ Nushell alias │ No
1 │ echo │ Nushell custom command │ No
2 │ echo │ Nushell built-in command │ Yes
3 │ echo │ /usr/bin/echo │ No
───┴──────┴──────────────────────────┴─────────
```
* Fix clippy lint
* Fix vec always Some even if empty
This commit applied adds comments preceding a command to the LiteCommands new
field `comments`.
This can be usefull for example when defining a function with `def`. Nushell
could pick up the comments and display them when the user types `help my_def_func`.
Example
```shell
def my_echo [arg] { echo $arg }
```
The LiteCommand def will now contain the comments `My echo` and `It's much
better :)`.
The comment is not associated with the next command if there is a (or multiple) newline
between them.
Example
```shell
echo 42
```
This new functionality is similar to DocStrings. One might introduce a special
notation for such DocStrings, so that the parser can differentiate better
between discardable comments and usefull documentation.
* Update dependencies
* Document the lexer and lightly improve its names
The bulk of this pull request adds a substantial amount of new inline
documentation for the lexer. Along the way, I made a few minor changes
to the names in the lexer, most of which were internal.
The main change that affects other files is renaming `group` to `block`,
since the function is actually parsing a block (a list of groups).
* Fix rustfmt
* Update lock
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
Co-authored-by: Jonathan Turner <jonathan.d.turner@gmail.com>
* Adding coerce filesize functionality to math avg median
* Updating initial value creating in Math Summation Reducer
* Update reducers.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* update the rust-embed dependency of nu-cli to 5.8.0 and undo the version pin of syn now that rust-embed-impl has been fixed
* unpin syn version in chart plugin
* update to shadow-rs 0.4. use easy
* update shadow-rs to 0.5
* fix version not used
* update
* update Cargo.lock
* update Cargo.lock
* fix wasm build error when use dependence git2
fix error link:https://dev.azure.com/nushell/nushell/_build/results?buildId=4858&view=logs&j=1a745d4c-b027-5f34-06d8-d6f256bfe9f9&t=a0a335cb-fa1f-5bbf-be01-1a90d6899e54
* remove code not used; fix warning by RUSTFLAGS="-D warnings" build error
* upgrade shadow-rs 0.5.2
* upgrade shadow-rs 0.5.7
make nushell reduce dependence crates smaller and build fast.
* upgrade shadow-rs 0.5.8
fix when use api 'strip_prefix()' method in less than rust1.45.0 build failed
* Display aliases and custom commands in which; Fix#2810
Example output of nu after the commit is applied:
```shell
/home/leo/repos/nushell(feature/which_inspect_alias)> def docker-ps [] { docker ps --format '{{json .}}' | from json -o }
/home/leo/repos/nushell(feature/which_inspect_alias)> which docker-ps
───┬───────────┬────────────────────────┬─────────
# │ arg │ path │ builtin
───┼───────────┼────────────────────────┼─────────
0 │ docker-ps │ nushell custom command │ No
───┴───────────┴────────────────────────┴─────────
/home/leo/repos/nushell(feature/which_inspect_alias)> alias d = gid pd
/home/leo/repos/nushell(feature/which_inspect_alias)> which d
───┬─────┬───────────────┬─────────
# │ arg │ path │ builtin
───┼─────┼───────────────┼─────────
0 │ d │ nushell alias │ No
───┴─────┴───────────────┴─────────
```
* Update documentation
* nu-stream is building on its own, now clean up Cargo.toml
* replace the stream crate in nu-cli
* cc
* since we moved stream out of the nu-cli crate and into its own crate we need to remove pub(crate) and just make it pub
* clean up the prelude and hand merge everything together
* clean up Cargo.tom
* cargo fmt along with Cargo.lock
* Begin allowing comments and multiline scripts.
* clippy
* Finish moving to groups. Test pass
* Keep going
* WIP
* WIP
* BROKEN WIP
* WIP
* WIP
* Fix more tests
* WIP: alias starts working
* Broken WIP
* Broken WIP
* Variables begin to work
* captures start working
* A little better but needs fixed scope
* Shorthand env setting
* Update main merge
* Broken WIP
* WIP
* custom command parsing
* Custom commands start working
* Fix coloring and parsing of block
* Almost there
* Add some tests
* Add more param types
* Bump version
* Fix benchmark
* Fix stuff
v0.29.0 and earlier versions of `uom` fail to compile on nightly because
of now-ambiguous trait bounds. The issue was corrected in v0.30.0 of
`uom`. `uom` and `heim` dependencies have been updated to the
latest version to include this fix and allow nushell to compile on
nightly.
Co-authored-by: Boutin, Michael <mjboutin@ecolab.com>
* updated & added date related commands based on the new design
* added proper error handling when date format string is invalid
* fixed format issue
* fixed an issue caused due to the change in primitive Date type
* added `date list-timezone` command to list all supported time zones and updated `date to-timezone` accordingly
This makes the errors slightly better. It took me a while to realize I was missing the `--raw` flag.
```
open "data.csv" | from csv --separator ';'
```
error: Could not parse as CSV split by ',' (Line 1: expected 1 fields, found 14)
┌─ shell:1:1
│
1 │ open "data.csv" | from csv --separator ';'
│ ^^^^ ------------------------------------------------- value originates from here
│ │
│ input cannot be parsed as CSV split by ','. Sample input:
Name;Data
Ugly;row
AnotherUgly;row
I think this still needs some refinement. Maybe we don't want to show
the separator all the time, omitting the defaults or the separator
on other formats.
* Bump Rustyline to 7.0.0
* Append history instead of always save
* Add associated type to Hinter
* Convert to using Rustyline KeyEvent
* Use AcceptOrInsertLine as struct
* Cargo fmt
* Make convert_keyevent pub
* Better naming for RL conversion
* WIP try testing hash command
Ensure test worked
fmt
WIP get it working for other types of base64
Use optional named arg
WIP
* rebased and refactored a little with encoding and decoding
Fix some typos
Add some more charactersets
refactor several args into the encoding config struct and fix character_set arg. It needs to match the field
Add main hash command so it can be found via help
Added tests for running the whole pipeline
* add test case to cover invalid character sets
* clippy and fmt
* Add string argument support for path subcommands
* Add --replace option to 'path extension' command
* Add examples of replacing for path extension
* Refactor path extension and its example
* Add replacement functionality to path basename
* Refactor path subcommands to support more args
This adds a lot of redundancy to non-relevant subcommands such as type,
exists or expand.
* Add replace and num_levels options to path dirname
* Rename num_levels option to num-levels
* Remove commented code
* Clean up path basename
* Fix path dirname description
* Add path filestem opts; Rename extension -> suffix
* Add prefix option and examples to path filestem
* Fix broken num-levels of path dirname
* Fix failing example test of path filestem
* Fix failing test of path extension
* Formatting
* Add Windows-specific path subcommand examples
`path expand` is still broken but otherwise seems to fix all examples
on Windows
* Fix weird path expand on Windows
Also disable example tests for path expand. Failed caconicalization
(e.g., due to path not existing) returns the original path so the
examples always fail.
* Formatting
* Return path datatype when appropriate
* Do not append empty remainder to path dirname
* Add tests for path subcommands
* Formatting
* Revisit path subcommand description strings
* Apply clippy suggestions; Formatting
* Remove problematic test checking '~' expansion
Wouldn't run on minimal due to useing optional dependency.
The test success was also deending on the presence of home dir on the
testing machine which might not be completely robust.
* Add missing newline to file
- fix the "installation chapter of the book" link, the current link has no "en/" for English as it does for other languages
- correct the link "learning resources in our [documentation]", missing in the new site, where the documentation is well highlighted in the top bar. Rephrased to point to the cookbook
* first step of making selector
* wip
* wip tests working
* probably good enough for a first pass
* oops, missed something.
* and something else...
* grrrr version errors
* seq command - WIP
* why, oh why
* works with parameters
* widths should've been optional
* dbg messages
* working. rest had to be first.
* updated so that it outputs a table instead of just strings
* made to work with floats, allowed separator be more than 1 char
* clippy
* fixed tests
* changed terminator help desc
* commit to get ci moving again
* Change alias shape inference to proposal of RFC#4
* Remove commented code
* Fix typo
* Change comment to be more informative
* Make match statement to lookup in table
* Remove resolved question
https://github.com/nushell/nushell/pull/2685#discussion_r509832054
* Pick ...or_insert_dependency functions into pieces
Previously there was get_shape_of_expr_or_insert dependency, now there is
get_shape_of_expr and get_shape_of_expr_or_insert_dependency
2 new functions have been added: get_result_shape_of_math_expr and
get_result_shape_of_math_expr_or_insert_dependency
* Remove flattening of deep binary expressions
Previously deep binary expressions have been flattened through the insertion of
fake vars. This logic was quite complicated. Now if a variable depends on the
result shape of a binary expression and the result shape can't be computed,
the variable simply depends on the whole binary.
* Change Expression::Variable(Variable::It(...)) to Expression::Variable(...)
* Simplify get_result_shapes_in_math_expr
* Simplify infer_shapes_in_binary_expr
* Clarify comment
* Clarify comment
* Fix clippy lint
* Move check for real var into checked_insert
* Remove comment
* Rename var
* added math round
* added math floor
* added math ceil
* added math.md examples
* moved the detection of nonnumerical values in ceil/floor/round
* math round now works on streams
* math floor now works on streams
* math ceil now works on streams
Continuing on anchoring and improvements on Nu's overall internal commands (#2635).
`move column` sub command has been turned into the command `move` since
we use it to move exclusively columns. Examples added as well.
Fixed it to carry along any anchor locations that might be in place if
table to be moved originates from other sources.
* Add parser improvements
Previously everything starting with "$" was parsed as a column path.
With this commit applied, the lite_arg starting with $ is parsed as
the most appropriate thing
- $true/$false ==> Expression::Boolean
- $(...) ==> Invocation
- $it ==> ColumnPath
- Anything with at least one '.' ==> ColumnPath
- Anything else ==> Variable
* Ignore failing tests
* refactor and cleanup to md
* Add padding around values in each row
* Add padding to test
* Update code to satisfy Clippy and pass other failing tests
* make sort-by fail gracefully if mismatched types are compared
* Added a test to check if sorted-by with invalid types exists gracefully
* Linter changes
* removed redundant pattern matching
* Changed the error message
* Added a comma after every argument
* Changed the test to accomodate the new err messages
* Err message for sort-by invalid types now shows the mismatched types
* Lints problems
* Changed unwrap to expect
* Added the -f flag to rm command
Now when you a use rm -f there will be no error message, even if the
file doesnt actually exist
* Lint problems
* Fixed the wrong line
* Removed println
* Spelling mistake
* Fix problems when you mv a file into itself
* Lint mistakes
* Remove unecessary filtering in most cases
* Allow the removal of sockets
* Conditional compilations to systems without socket
* Add a size-format option to ls command
* Added kib and mib formating
* Make patterns lowercase
* New subcommand to format, filesize
* Forgot the linter once more
* Remove the ls changes since its no longer needed
* CI mistakes
* Lint stuff
* Fix lint
* Added formatting for bytes
* fix lint
* Changed the usage comment
* First draft for adding a `pretty` flag to `to md`
* rustfmt
* Fix Clippy warnings
* rustfmt
* Using Clippy suggestion broken code, reverting and putting in a statement to ignore clippy warning
* Add test for `to md -p`
Multiline pastes wait for the user to hit enter before running,
because they enter a special paste mode in rustyline called
'bracketed paste' by default. This commit disables that mode
by default for nushell, causing multiline pastes to be executed
immediately, treating each new line as a separate command.
* xpath prototype
* new xpath engine is finally working
* nearly there
* closer
* working with list, started to add test, code cleanup
* broken again
* working again - time for some cleanup
* cleaned up code, added error handling and test
* update example, fix clippy
* removed commented char
Nu has many commands that allow the nuño to customize behavior such
as UI and behavior. Today, coloring can be customized, the line editor,
and other things. The more options there are, the higher the complexity
in managing them.
To mitigate this Nu can store configuration options as nested properties.
But to add and edit them can be taxing. With column path support we can
work with them easier.
* [wasi] Update time & instant crates
In https://github.com/nushell/nushell/pull/2643 instant was updated by adding it as a hard dependency in Cargo.toml, but it's better to avoid it and only update in Cargo.lock via `cargo update -p ...`.
Additionally, updated `time` crate so that now some basic commands like `ls` work too, although formatting is pretty bad.
* Update default terminal width to 80
If termsize can't return anything, use 80 chars (e.g. on WASI).
* make sort-by fail gracefully if mismatched types are compared
* Added a test to check if sorted-by with invalid types exists gracefully
* Linter changes
* removed redundant pattern matching
* Changed the error message
* Added a comma after every argument
* Changed the test to accomodate the new err messages
* Err message for sort-by invalid types now shows the mismatched types
* Lints problems
* Changed unwrap to expect
* Added the -f flag to rm command
Now when you a use rm -f there will be no error message, even if the
file doesnt actually exist
* Lint problems
* Fixed the wrong line
* Removed println
* Spelling mistake
* Fix problems when you mv a file into itself
* Lint mistakes
* Remove unecessary filtering in most cases
* Allow the removal of sockets
* Conditional compilations to systems without socket
* make sort-by fail gracefully if mismatched types are compared
* Added a test to check if sorted-by with invalid types exists gracefully
* Linter changes
* removed redundant pattern matching
* Changed the error message
* Added a comma after every argument
* Changed the test to accomodate the new err messages
* Err message for sort-by invalid types now shows the mismatched types
* Lints problems
* Changed unwrap to expect
* Added the -f flag to rm command
Now when you a use rm -f there will be no error message, even if the
file doesnt actually exist
* Lint problems
* Fixed the wrong line
* Removed println
* Spelling mistake
* Fix problems when you mv a file into itself
* Lint mistakes
* Remove unecessary filtering in most cases
* Refactor scope to have parents
* Refactor scope to have parents
* Refactor scope to have parents
* Clippy
Co-authored-by: Jonathan Turner <jonathan@pop-os.localdomain>
* Implement passthrough for benchmark
Add a new option -p,--passthrough to benchmark.
With this option, the benchmark command prints its results to stdout and passes the block's output to the next command in the pipeline.
* Add execution block for benchmark -p
`benchmark --passthrough` now takes a block where the benchmark output is sent.
Example:
`benchmark -p {save bench.toml} {ls}`
* Add global mode to str trim
The global mode allows skipping non-string values,
and processes rows and tables as well
* Add tests to action with ActionMode::Global
* Add system, user and idle times to benchmark command
* Feature-gate dependency on heim in benchmark
* Reorder let bindings in benchmark
* Fully feature-gate rich-benchmark and print 0sec on zero duration
* Remove completion code from help/value shells
* Tweak the `Completer` trait for nushell.
Previously, this trait was built around rustyline's completion traits, and for
`Shell` instances. Now it is built for individual completers inside of nushell
that will complete a specific location based on a partial string. For example,
for completing a partially typed command in the command position.
We introduce the `plugin` nu sub command (`nu plugin`) with basic plugin
loading support. We can choose to load plugins from a directory. Originally
introduced to make integration tests faster (by not loading any plugins on startup at all)
but `nu plugin --load some_path ; test_pipeline_that_uses_plugins_just_loaded` does not see it.
Therefore, a `nu_with_plugins!` macro for tests was introduced on top of nu`s `--skip-plugins`
switch executable which is set to true when running the integration tests that use the `nu!` macro now..
* Implement exclusive and inclusive ranges with .. and ..=
This commit adds right-exclusive ranges.
The original a..b inclusive syntax was changed to reflect the Rust notation.
New a..=b syntax was introduced to have the old behavior.
Currently, both a.. and b..= is valid, and it is unclear whether it's valid
to impose restrictions.
The original issue suggests .. for inclusive and ..< for exclusive ranges,
this can be implemented by making simple changes to this commit.
* Fix collect tests by changing ranges to ..=
* Fix clippy lints in exclusive range matching
* Implement exclusive ranges using `..<`
Previously, we weren't expanding `~`, so `std::fs::metadata` was failing. We now
make use of `PathSuggestion` to get the actual path, as represented by a
`PathBuf`.
* remove unused dependencies
* moved umask to cfg(unix)
* changed Inflector to inflector, hoping it fixes the issue.
* roll back Inflector
* removed commented out deps now that everything looks good.
* First commit updating `config` to use subcommands (#2119)
- Implemented `get` subcommand
* Implmented `config set` as a subcommand.
* Implemented `config set_into` as subcommand
* Fixed base `config` command
- Instead of outputting help, it now outputs the list of all
configuration parameters.
* Added `config clear` subcommand
* Added `config load` and `config remove` subcommands
* Added `config path` subcommand
* fixed clippy
* initial commit for implementing groups
* each group works
* each group is slightly cleaner + added example
* Added `each window` subcommand
- No support for stride flag yet
* each window stride implemented
* Added tests and minor documentation changes
* fixed clippy
* fixed clippy again
Previously, we'd check for a `~/` prefix and then return the home directory as
the base `PathBuf`. We failed to consider pushing any of the other possible path
components into this base dir, which prevent completions more than one level
deep (for example, `~/.config/<TAB>` would fail).
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* clean up some comments
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* added weather symbols/chars
Although convenient, since the user doesn't have to type the space, it could be
a little surprising to users since they may think that was the only completion
in certain completions modes (for example, `cycle`).
* fixed: .*.(ext|*)
* ls **/* does not return hidden files without the -a flag
* fixed formatting
* fixed clippy issues
* fixed clippy issues, v2
* added `#[cfg(unix)]` to windows-failing test
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* ensure ansi mode is enabled on windows
ansi mode sometimes gets out of sync in Windows.
I'm not sure why but this appears to fix it.
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* shouldn't these both bet clipboard-cli?
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* fixed bug where no config.toml or not set settings made weird defaults.
* clippy & fmt again
* Header default alignment is left.
Co-authored-by: Andrés N. Robalino <andres@androbtech.com>
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* merges
* some info on how to set colors
* WIP - compiling but not working
* semi-working
* making progress
* working except for table lines
* fmt + clippy
* cleaned up some comments
* working line colors
* fmt, clippy, updated sample config.toml
* removed extra comments
* Use the cursor position for the span when between locations.
This fixes a bug where completing
ls <TAB>
would result in replacing the entire line.
* Revert to the default update implementation.
Replacing the length of the elected value was intended to do replacement when
one moves inside a quote. The problem is that a long elected suggestion could
replace bits of a pipeline that are after the cursor. For example:
ls <TAB> | get name | str collect
We ensure the partially cimpleted item doesn't include the end quote. We also
ensure that the appropriate span is replaced, not just the suggested position up
to the cursor position.
- Ensure quotes surround suggestion replacement when there are spaces.
- Ensure an appropriate quote character is chosen based on other quoting
characters being in the suggestions.
Previously, we used rustyline's filename completer. This allowed us to make
progress on the completion engine without building all the parts at once. We now
need our own filename completer to make progress.
The primary driver to having our own filename completer is that it can better
integrate with our path constructs. For example, if we have
> ls .../<TAB>
we want to show a list of suggestions that includes all files two directories up
from the current working directory. The least jarring experience to a user would
be to maintain the three dots. The easiest way for us to do this is by building
our own completer and path constructs.
Doing 'cd .' or an equal command used to modify the prompt: It appended an './' and was even
repeatable, leading to strange prompts (believe me, I tested it for too long).
This fixes#2432
* Show directories and executable for command completion.
Previously we chose from two sets for completing the command position:
1. internal commands, and
2. executables relative to the PATH environment variable.
We now also show directories/executables that match the relative/absolute path
that has been partially typed.
* Fix for Windows
* Allow the calculation of bytes and int.
* fix clippy.
* minimal implement the into_into command.
* Revert "fix clippy."
This reverts commit 0d7cf72ed2.
* Revert "Allow the calculation of bytes and int."
This reverts commit 9c4e3787f5.
* set the argument to any type.
* if the argument is an int, return it with no change in value.
* add tests for into-int command.
* fix a faild test.
* plugin changes to support script plugins
* all platforms can have plugins with file extensions
* added .cmd, .py, .ps1 for windows
* added more trace! statements to document request and response
* WIP
* pretty much working, need to figure out sink plugins
* added a home for scripting plugin examples, ran fmt
* Had a visit with my good friend Clippy. We're on speaking terms again.
* add viable plugin extensions
* clippy
* update to load plugins without extension in *nix/mac.
* fmt
Previously, lite parse would stack up opening delimiters in vec, and if we
didn't close everything off, it would simply return an error with a partial form
that didn't include the missing closing delimiters. This commits adds those
delimiters so that `classify_block` can parse correctly.
The parser sees this as a positional argument, but when requesting completions
this could be either a filename that starts with a hyphen, or it could be a
flag. This expands the completion engine's interface to return a vec of possible
completion locations instead of an optional one, because we want to show all
possibilities instead of assuming one or the either.
The completion engine maps completion locations to spans on a line, which
indicate whther to complete a command name, flag name, argument, and so on.
Initial implementation is simplistic, with some rough edges, since it relies
heavily on the parser's interpretation. For example
du -
if asking for completions, `-` is considered a positional argument by the
parser, but the user is likely looking for a flag. These scenarios will be
addressed in a series of progressive enhancements to the engine.
* Add deserialization of Primitive::Duration; Fixes#2373
* Implement Sleep command
* Add comment saying you should name your rest field "rest"
* Fix typo
* Add documentation for sleep command
* created text_color and line_color functions with hopes of theming soon.
* added text_color and line_color to hastableproperties
* Refactor Tractor.
* more refactoring
* make sort-by fail gracefully if mismatched types are compared
* Added a test to check if sorted-by with invalid types exists gracefully
* Linter changes
* removed redundant pattern matching
* Changed the error message
* Added a comma after every argument
* Changed the test to accomodate the new err messages
* Err message for sort-by invalid types now shows the mismatched types
* Lints problems
* Changed unwrap to expect
* Modify testcase
* Run exitscript in the folder it was specified
* Update documentation
* Add comment
* Borrow instead of clone
* Does this just... work on windows?
* fmt
* as_str
* Collapse if by order of clippy
* Support windows
* fmt
* refactor tests
* fmt
* This time it will work on windows FOR SURE
* Remove debug prints
* Comment
* Refactor tests
* fmt
* fix spelling
* update comment
* added various case conversion commands for str. Added the inflection crate as a dependency
* lighten the restriction on the inflector dependency
* publishing the case commands
* fix typo
* fix kebab case test
* formatting
The initial configuration refactoring already gave significant benefits
with my use case. On another note, Commands should know and ask for
configuration variables. We could, as we refactor, add the ability
for commands to tell what configuration variables knows about and
their types.
This way, completers can be used too when using `config` command if we
also add a sub command that config could set variables to.
Commands stating the config variables they know about will allow us
to implement it in `help` and display them.
* Changed time units as outlined in issue #2353.
Also applied changes to to_str for Unit - not sure if that was what was wanted.
* Forgot the tests!
* Updated primitive.rs to match changes.
* Updated where example to match changes.
* And the html test!
* Add commit to version command
* Replace unwrap with expect.
* Only have commit hash if git doesn't error
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Remove `with-symlink-targets` flag from `ls`
* Fix test to use `ls -l` to output all the columns of `ls`
* Fix error message
* Delete test that originally covered `ls -w`
* Updated version hashing and bumped nu-cli to 0.18.1
* made code pertyer
* Update version.rs
* Update version.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Make history location configurable
Add history-path to your config if you want an alternate history file
location
* use IndexMap.get() instead of index
Co-authored-by: Amanita Muscaria <nope>
* add 228 json html themes
removed old assets, added new zipped asset
added --list to get a list of the theme names
reworked some older theme code
added rust-embed and zip crate
removed the dark tests
* fmt
* Updated, removed excess comments
Changed usage a bit
Updated the error handling
Added some helper items in --list
* removed rustyline config duplication
set other rustyline defaults if line_editor section doesn't exist
updated keyseq_timeout to -1 if emacs mode is chosen
* change checking rustyline config to if lets
* removed some unneccessary code
Refactored out most of internal work for summarizing data opening
the door for generating charts from it. A model is introduced
to hold information needed for a summary, Histogram command is
an example of a partial usage. This is the beginning.
Removed implicit arithmetic traits on Value and Primitive to avoid
mixed types panics. The std operations traits can't fail and we
can't guarantee that. We can handle gracefully now since compute_values
was introduced after the parser changes four months ago. The handling
logic should be taken care of either explicitly or in compute_values.
The zero identity trait was also removed (and implementing this forced
us to also implement Add, Mult, etc)
Also: the `math` operations now remove in the output if a given column is not computable:
```
> ls | math sum
──────┬──────────
size │ 150.9 KB
──────┴──────────
```
* Delete unnecessary match
* Use `unwrap_or_else()`
* Whitespace was trim on file save
* Use `map_or_else()`
* Use a default to group all match arms with same output
* Clippy made me do it
* Move lite_parse tests into a submodule
* Have lite_parse return partial parses when error encountered.
Although a parse fails, we can generally still return what was successfully
parsed. This is useful, for example, when figuring out completions at some
cursor position, because we can map the cursor to something more structured
(e.g., cursor is at a flag name).
* Add two further path cmds - type and exists
* Update type.rs
Try a more universal directory
* Update type.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Add new path commands
basename, expand and extension. Currently there is no real error
handling. expand returns the initial path if it didn't work, the others
return empty string
* Optionally apply to path
- Removing old code for dealing with escaping, since that has moved elsewhere.
- Eliminating some match statements in favour of result/option methods.
- Fix an issue where completing inside quotes could remove the quote at the
beginning, if one already existed on the line but the replacement didn't have
a quote at the beginning.
* Refactor all completion logic into `NuCompleter`
This is the next step to improving completions. Previously, completion logic was
scattered about (`FilesystemShell`, `NuCompleter`, `Helper`, and `ShellManager`).
By unifying the core logic into a central location, it will be easier to take the
next steps in improving completion.
* Update context.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
In any other shell, stderr is inherited like normal, and only piped if you
request it explicitly (e.g., `2>/dev/null`). In the case of a command like
`fzf`, stderr is used for the interactive selection of files. By piping it,
something like
fzf | xargs echo
does not work. By removing all stderr piping we eliminate this issue. We can
return later with a way to deal with stderr piping when an actual use case
arises.
* added campbell theme to html colors
* updated test results. had to make change for ci.
* hopefully the last changes for this stupid test :)
* moved tests to html.rs
* remove unnecessary using statement.
* still fighting with tests and tests are winning.
* Rename `calc` to `math eval` and allow it to optionally take the expression as an argument
* Moved calc tests to math eval
Also added 2 tests and changed 1 test
* Move calc docs to math eval
* Introduce completion abstractions to nushell.
Currently, we rely on rustyline's completion structures. By abstracting this
away, we are more flexible to introduce someone elses completion engine, or our
own.
* Update value_shell.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Working towards a PoC for wasm
* Move bson and sqlite to plugins
* proof of concept now working
* tests are green
* Add CI test for --no-default-features
* Fix some tests
* Fix clippy and windows build
* More fixes
* Fix the windows build
* Fix the windows test
* Very rough idea
* Remove colour codes
* Work on command for generating docs
* Quick comment
* Use nested collapsible markdown
* Refine documentation command
* Clippy and rename docs
* This layout probably seems best
Also moved some code to documentation.rs to avoid making help.rs massive
* Delete summaries.md
* Add usage strings
* Remove static annotations
* get_documentation produces value
Which will be used like
'help generate_docs | save "something"'
The resulting yaml can be passed to a script for generating HTML/MD files in the website
* Fix subcommands
* DRY code
* Address clippy:
* Fix links
* Clippy lints
* Move documentation to more central location
* Fix autoenv executing scripts multiple times
Previously, if the user had only specified entry or exitscripts the scripts
would execute many times. This should be fixed now
* Add tests
* Run exitscripts
* More tests and fixes to existing tests
* Test solution with visited dirs
* Track visited directories
* Comments and fmt
* add variance (population)
subcommand to math
* impl variance subcommand with spanning errors for invalid types
* add stddev subcommand to math
* rename bytes to filesize
* clippy fix -- use expect instead of unwrap in variance tests
* adding color to html output
* latest changes
* seems to be working now
* WIP - close. Good is the enemy of Great.
* fixed the final issues... hopefully
* add test basic_autoenv_vars_are_added
* Tests
* Entry and exit scripts
* Recursive set and overwrite
* Make sure that overwritten vals are restored
* Move tests to autoenv
* Move tests out of cli crate
* Tests help, apparently. Windows has issues
On windows, .nu-env is not applied immediately after running autoenv trust.
You have to cd out of the directory for it to work.
* Sort paths non-lexicographically
* Sibling dir test
* Revert "Sort paths non-lexicographically"
This reverts commit 72e4b856af.
* Rename test
* Change conditions
* Revert "Revert "Sort paths non-lexicographically""
This reverts commit 71606bc62f.
* Set vars as they are discovered
This means that if a parent directory is untrusted,
the variables in its child directories are still set properly.
* format
* Fix cleanup issues too
* Run commands in their separate functions
* Make everything into one large function like all the cool kids
* Refactoring
* fmt
* Debugging windows path issue
* Canonicalize
* Trim whitespace
* On windows, use echo nul instead of touch to create file in test
* Avoid cloning by using drain()
* add human, precision commands
* add 'str from' subcommand (converted from human/precision commands)
move human tests to str from
* add default locale, platform-specific SystemLocale use
* fix platform specific num-format dependency, remove invalid test
* change 'str from' localization to static num_format::Locale::en
* minor cleanup, nudge ci
* re-attempt ci
* First commit updating `config` to use subcommands (#2119)
- Implemented `get` subcommand
* Implmented `config set` as a subcommand.
* Implemented `config set_into` as subcommand
* Fixed base `config` command
- Instead of outputting help, it now outputs the list of all
configuration parameters.
* Added `config clear` subcommand
* Added `config load` and `config remove` subcommands
* Added `config path` subcommand
* fixed clippy
* Add args in .nurc file to environment
* Working dummy version
* Add add_nurc to sync_env command
* Parse .nurc file
* Delete env vars after leaving directory
* Removing vals not working, strangely
* Refactoring, add comment
* Debugging
* Debug by logging to file
* Add and remove env var behavior appears correct
However, it does not use existing code that well.
* Move work to cli.rs
* Parse config directories
* I am in a state of distress
* Rename .nurc to .nu
* Some notes for me
* Refactoring
* Removing vars works, but not done in a very nice fashion
* Refactor env_vars_to_delete
* Refactor env_vars_to_add()
* Move directory environment code to separate file
* Refactor from_config
* Restore env values
* Working?
* Working?
* Update comments and change var name
* Formatting
* Remove vars after leaving dir
* Remove notes I made
* Rename config function
* Clippy
* Cleanup and handle errors
* cargo fmt
* Better error messages, remove last (?) unwrap
* FORMAT PLZ
* Rename whitelisted_directories to allowed_directories
* Add comment to clarify how overwritten values are restored.
* Change list of allowed dirs to indexmap
* Rewrite starting
* rewrite everything
* Overwritten env values tracks an indexmap instead of vector
* Refactor restore function
* Untrack removed vars properly
* Performance concerns
* Performance concerns
* Error handling
* Clippy
* Add type aliases for String and OsString
* Deletion almost works
* Working?
* Error handling and refactoring
* nicer errors
* Add TODO file
* Move outside of loop
* Error handling
* Reworking adding of vars
* Reworking adding of vars
* Ready for testing
* Refactoring
* Restore overwritten vals code
* todo.org
* Remove overwritten values tracking, as it is not needed
* Cleanup, stop tracking overwritten values as nu takes care of it
* Init autoenv command
* Initialize autoenv and autoenv trust
* autoenv trust toml
* toml
* Use serde for autoenv
* Optional directory arg
* Add autoenv untrust command
* ... actually add autoenv untrust this time
* OsString and paths
* Revert "OsString and paths"
This reverts commit e6eedf8824.
* Fix path
* Fix path
* Autoenv trust and untrust
* Start using autoenv
* Check hashes
* Use trust functionality when setting vars
* Remove unused code
* Clippy
* Nicer errors for autoenv commands
* Non-working errors
* Update error description
* Satisfy fmt
* Errors
* Errors print, but not nicely
* Nicer errors
* fmt
* Delete accidentally added todo.org file
* Rename direnv to autoenv
* Use ShellError instead of Error
* Change tests to pass, danger zone?
* Clippy and errors
* Clippy... again
* Replace match with or_else
* Use sha2 crate for hashing
* parsing and error msg
* Refactoring
* Only apply vars once
* if parent dir
* Delete vars
* Rework exit code
* Adding works
* restore
* Fix possibility of infinite loop
* Refactoring
* Non-working
* Revert "Non-working"
This reverts commit e231b85570.
* Revert "Revert "Non-working""
This reverts commit 804092e46a.
* Autoenv trust works without restart
* Cargo fix
* Script vars
* Serde
* Serde errors
* Entry and exitscripts
* Clippy
* Support windows and handle errors
* Formatting
* Fix infinite loop on windows
* Debugging windows loop
* More windows infinite loop debugging
* Windows loop debugging #3
* windows loop #4
* Don't return err
* Cleanup unused code
* Infinite loop debug
* Loop debugging
* Check if infinite loop is vars_to_add
* env_vars_to_add does not terminate, skip loop as test
* Hypothesis: std::env::current_dir() is messing with something
* Hypothesis: std::env::current_dir() is messing with something
* plz
* make clippy happy
* debugging in env_vars_to_add
* Debbuging env_vars_to_add #2
* clippy
* clippy..
* Fool clippy
* Fix another infinite loop
* Binary search for error location x)
* Binary search #3
* fmt
* Binary search #4
* more searching...
* closing in... maybe
* PLZ
* Cleanup
* Restore commented out functionality
* Handle case when user gives the directory "."
* fmt
* Use fs::canonicalize for paths
* Create optional script section
* fmt
* Add exitscripts even if no entryscripts are defined
* All sections in .nu-env are now optional
* Re-read config file each directory change
* Hot reload after autoenv untrust, don't run exitscripts if untrusted
* Debugging
* Fix issue with recursive adding of vars
* Thank you for finding my issues Mr. Azure
* use std::env
* Stuff column with nothing if we have nothing
* Stuff columns at the very start
Remove unnecessary else clauses.
Add the unix cfg portion
* Added some tests and cfg windows
Not sure how I feel about these tests but it's better than nothing
* Types lined up for open with stream
* Chunking stream
* Maybe I didn't need most of the Stream stuff after all?
* Some clean-up
* Merge weird cargo.lock
* Start moving some encoding logic to MaybeTextCodec
Will we lose the nice table formatting if we Stream? How do we get it back? Collect the Stream at the end?
* Clean-up and small refinements
* Put in auto-convert workaround
* Workaround to make sure bat functionality works
* Handle some easy error cases
* All tests pass
* Remove guessing logic
* Address clippy comments
* Pull latest master and fix MaybeTextCodec usage
* Add tag to enable autoview
Our own custom escaping unfortunately is far too simple to cover all cases.
Instead, the parser will now do no transforms on the args passed to an external
command, letting the process spawning library deal with doing the appropriate
escaping.
* .get() already checks for the argument, don't need to use .has() as well
* Supplying the month-names flag should also cause the months column to show up, it should not require the -m flag first
* [ADD] Add draft documentation for autoview
* [ADD] Add draft documentation for pwd
* [ADD] Add draft documentation for touch
* [MOD] Improve description and add examples
Add the use of `textview` and `binaryview`.
Add examples for single value, source file and binary file.
* Add bool subcommand to random
* Fix function name copy paste error
* Fix issue 2062: allow deserialization of a decimal
* Add bias flag to `random bool`
* Added wix to gh workflow
Followed volta example
* added --nocapture to see more error detail
* move creation of wix to after we download less.exe
* moved create wix down
* WIP - wix
* Updated wxs to have less. Added less.exe.
* removed binary less.exe since we're downloading it
updated wxs to point to output/* for less.exe
Co-authored-by: Darren Schroeder <fdncred@hotmail.com>
* Update calculate to return a table when Value is a table
* impl mode subcommand for math
* add tests for math mode subcommand
* add table/row tests for math mode subcommand
* fix formatting
* uniq: Add counting option (WIP!)
Usage:
fetch https://raw.githubusercontent.com/timbray/topfew/master/test/data/access-1k | lines | wrap item | uniq | sort-by count | last 10
* uniq: Add first test
* uniq: Re-enable the non-counting variant.
* uniq: Also handle primitive lines.
* uniq: Update documentation
* uniq: Final comment about error handling. Let's get some feedback
* uniq: Address review comments.
Not happy with the way I create a TypeError. There must be a cleaner
way. Anyway, good for shipping.
* uniq: Use Labeled_error as suggested by jturner in chat.
* uniq: Return error directly.
Co-authored-by: Christoph Siedentop <christoph@siedentop.name>
* simplify textview match code
* Math median tests and documentation additions (#2018)
* Add math median example and unit tests
* Update output of other all math ls command examples to keep consistent with math median output
* Fix output of math max example
* Update output of other math commands using pwd examples to keep data consistent
* Add math median example and unit tests
* Update output of other all math ls command examples to keep consistent with math median output
* Fix output of math max example
* Update output of other math commands using pwd examples to keep data consistent
* WIP - changes to support bat config
* added bat configuration
* removed debug info
* clippy fix
* changed [bat] to [textview]
Co-authored-by: Darren Schroeder <fdncred@hotmail.com>
* Move sum tests into math directory
* Move sum documentation over to math documentation
One sum example already existed in the math examples and a few of the others were outdated and didn't work, so I only moved one over, and updated their output
* Remove no-longer-in-use mod statement
* Add support to allow the week day start in cal to be configurable
* Fix variable name
* Use a flag instead of a configuration setting for specifying the starting day of the week
* WIP - Modified textview to use bat crate
* use input_from_bytes_with_name instead of input_file
* removed old paging
added prettyprint on else blocks
duplicated too much code
hard coded defaults
Co-authored-by: Darren Schroeder <fdncred@hotmail.com>
* Add 'every' command
* Add --skip option to 'every' command
This option skips instead of selects every nth row
* Fix descriptions for 'every' command
* Add docummentation for 'every' command
* Check actual filenames in 'every' command tests
* Adding math docs
* Add some comments to calculate
* Remove redudant message
Message already shows up in subcommands list
* Added not working example
Accidentantly
* Remove table
* Converting average.rs to math.rs
* Making some progress towards math
Examples and unit tests failing, also think I found a bug with passing in strings
* Fix typos
* Found issue with negative numbers
* Add some comments
* Split commands like in split and str_ but do not register?
* register commands in cli
* Address clippy warnings
* Fix bad examples
* Make the example failure message more helpful
* Replace unwraps
* Use compare_values to avoid coercion issues
* Remove unneeded code
* WIP - not compiling
* compiling but panicing
* still broken
* nearly working
* reverted deserializer_string changes
updated enter.rs and open.rs to use Option<Tagged<String>>
Accepted Clippy suggestions
Accepted fmt suggestions
Left original code from open.rs
We may want to use some of it and only fallback to encoding.
* Don't exit when there is an unknown encoding.
* When encoding is unknown default to utf-8.
* only do encoding if the user says to it
* merged some conflicts on open
* made error messages consistent
* Updated unwrap with expect
* updated open test to pass with more descriptive err
updated enter test to not fail
* change _location to location
* changed _visitor to visitor
* Added a more verbose usage statement for encoding
Linked to docs.rs/encoding_rs for details
Co-authored-by: Darren Schroeder <fdncred@hotmail.com>
* Add args in .nurc file to environment
* Working dummy version
* Add add_nurc to sync_env command
* Parse .nurc file
* Delete env vars after leaving directory
* Removing vals not working, strangely
* Refactoring, add comment
* Debugging
* Debug by logging to file
* Add and remove env var behavior appears correct
However, it does not use existing code that well.
* Move work to cli.rs
* Parse config directories
* I am in a state of distress
* Rename .nurc to .nu
* Some notes for me
* Refactoring
* Removing vars works, but not done in a very nice fashion
* Refactor env_vars_to_delete
* Refactor env_vars_to_add()
* Move directory environment code to separate file
* Refactor from_config
* Restore env values
* Working?
* Working?
* Update comments and change var name
* Formatting
* Remove vars after leaving dir
* Remove notes I made
* Rename config function
* Clippy
* Cleanup and handle errors
* cargo fmt
* Better error messages, remove last (?) unwrap
* FORMAT PLZ
* Rename whitelisted_directories to allowed_directories
* Add comment to clarify how overwritten values are restored.
* Do not allow invalid top-level toml
Move recursive toml conversion into a helper func
* Forgot to format
* Forgot to use helper inside collect values
Added some additional tests
* Add `rm_always_trash` option to config
* Add `--permanent` flag to `rm`
* `rm`: error if both `-t` and `-p` are present
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Possible implementation of globbing for start command
* Whoops forgot to remove Error used for debugging
* Use string lossy
* Run clippy
* Pin glob
* Better error messages
* Remove unneeded comment
Primarily, instead of building a parse pattern enum, we just build the regex
directly, with the appropriate capture group names so that the column name
codepaths can be shared between simple and `--regex` patterns.
Also removed capture group count compared to column name count. I don't think
this codepath can possibly be reached with the regex we now use for the
simplified capture form.
* Show error when trying to sort by invalid column
* Added test for changes
* Addressed comments, updated test
* Removed unnecessary mutable keyword
* Changed split-column to solt column after rebase from upstream
* added examples and explanation to trim
inserted examples (taken from parse in cookbook) for lists and tables using trim
* Move `to-json` to `to json`
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* added helper to convert data to strings
added ability to auto-rotate single row output
if row will be greater than terminal width
* Added pivot_to_fit config value
* Added ColumnPath to convert_to_string helper
* Figured out I had to run `cargo fmt --all -- --check`
Co-authored-by: Darren Schroeder <fdncred@hotmail.com>
* figuring out error with lines
* make progress in printing of block
* support for external commands; fix some tiny bugs in formatting
* basic printing of block; going to experiment with bubbling raw input to the command itself to avoid potential edge cases
* remove fmt::Display impls for hir structs; bubbled raw_input to command args
* compiling checkpoint :)
* process raw input alias to remove save flag; do duplicates stored
* fix warnings; run clippy
* removed tmux log file
* fix bug in looking for same alias; changed unwraps to safe unwraps
* Adding iniitial draft for the addition of the count column on the histogram command
* Update histogram documentation
* Add count column test to histogram command
* Fix error in histogram documentation
* Calculate the quarter directly
* Group some data together, remove attribute to ignore Clippy warning
* Group items into structs and add methods
* Updates to cal command
* Update cal.rs
* Update cal.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
This changeset contains everything that a separate binary needs to
register its own commands (including the new help function). It is
very possible that this commit misses other pub use exports, but
the contained ones work for our use cases so far.
* Don't include year and month by default, adds an option to display the quarters of the year
* Add a test for cal that checks that year requested is in the return
* rustfmt the cal tests
* Add cal command
* Fix docmentation to show commands on two lines
* Use bullet points on flag documentation for cal
* Dereference day before calling string method
* Silence Clippy warning regarding a function with too many arguments
* Update cal flag descriptions and documentation
* Add some tests for the cal command
* mvp for start command
* modified the signature of the start command
* parse filenames
* working model for macos is done
* refactored to read from pipes
* start command works well on macos; manual testing reveals need of --args flag support
* implemented start error; color printing of warning and errors
* ran clippy and fixed warnings
* fix a clippy lint that was caught in pipeline
* fix dead code clippy lint for windows
* add cfg annotation to import
This adds a top-level document for the new `to` command, with a list (of links) of all the subcommands.
All the to-* subcommands keep their filename, but the content is updated to use the new subcommand syntax.
Since not all subcommands have documentation, some items in the list are just text without a link. Also filled the list for the undocumented from* commands in the same style.
Fixes#1709
This adds a top-level document for the new `from` command, with a list of links of all the subcommands.
All the from-* subcommands keep their filename, but the content is updated to use the new subcommand syntax.
Needs matching update for to*
Ref #1709
Both to and from without a subcommand only print the helptext. Expand the usage line a bit, so a glance at `help commands` indicates the existance of the subcommands and mentions some common formats.
Ref a9968046ed
Ref #1708
* Changes to allow plugins to be loaded in a multi-threaded manner in order to decrease startup time.
* Ran rust fmt and clippy to find and fix first pass errors.
Updated launch.jason to make debugging easier in vscode.
Also added tasks.json so tasks like clippy can be ran easily.
* ran fmt again
* Delete launch.json
Remove IDE settings file
* Remove IDE settings file
* Ignore vscode IDE settings
* Cloned the context instead of Arc/Mutexing it.
Co-authored-by: Darren Schroeder <fdncred@hotmail.com>
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Fix: the symlink target column will only dispaly if either the `full` or `with_symlink_targets` options are given
* If the metadata for every item in the size column is None, do not show the size column
* Do not show the symlink target column if the metadata is None for all the items in the table
* fix: absolutize path against its parent if it was a symlink.
On Linux this happens because Rust calls readlink but doesn't canonicalize the resultant path.
* feat: playground function to create symlinks
* fix: use playground dirs
* feat: test for #1631, shift tests names
* Creation of FilesystemShell with custom location may fail
* Replace ichwh with which
* Creation of FilesystemShell with custom location may fail
* Replace ichwh with which
* fix: add ichwh again since it cannot be completely replaced
* fix: replace one more use of which
For example, when running the following:
crates/nu-cli/src
nushell currently parses this as an external command. Before running the command, we check to see if
it's a directory. If it is, we "auto cd" into that directory, otherwise we go through normal
external processing.
If we put a trailing slash on it though, shells typically interpret that as "user is explicitly
referencing directory". So
crates/nu-cli/src/
should not be interpreted as "run an external command". We intercept a trailing slash in the head
position of a command in a pipeline as such, and inject a `cd` internal command.
* make trim apply to strings contained in tables (also at deeper nesting
levels), not just top-level strings
* remove unnecessary clone (thanks clippy)
* from-eml initial ver
* Adding tests for `from-eml`
* Add eml to prepares_and_decorates_filesystem_source_files
* Sort the file order
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* fix: absolutize path against its parent if it was a symlink.
On Linux this happens because Rust calls readlink but doesn't canonicalize the resultant path.
* feat: playground function to create symlinks
* fix: use playground dirs
* feat: test for #1631, shift tests names
* refactor: expand_path and expand_ndots now work for any string.
* refactor: refactor test and add new ones.
* refactor: convert expanded to owned string
* feat: pub export of expand_ndots
* feat: add completion for ndots in fs-shell
* Fix --headerless option of to-csv and to-tsv
Before to-csv --headerless split the "headerfull" output on lines,
skipped the first, and then concatenated them together. That meant
that all remaining output would be put on the same line, without
any delimiter, making it unusable. Now we replace the range of the
first line with the empty string, maintaining the rest of the
output unchanged.
* Remove extra space in indentation of to_delimited_data
* Add --separator <string> argument to to-csv
This functionaliy has been present before, but wasn't exposed
to the command.
* Refactor InputStream and affected commands.
First, making `values` private and leaning on the `Stream` implementation makes
consumes of `InputStream` less likely to have to change in the future, if we
change what an `InputStream` is internally.
Second, we're dropping `Option<InputStream>` as the input to pipelines,
internals, and externals. Instead, `InputStream.is_empty` can be used to check
for "emptiness". Empty streams are typically only ever used as the first input
to a pipeline.
* Add run_external internal command.
We want to push external commands closer to internal commands, eventually
eliminating the concept of "external" completely. This means we can consolidate
a couple of things:
- Variable evaluation (for example, `$it`, `$nu`, alias vars)
- Behaviour of whole stream vs per-item external execution
It should also make it easier for us to start introducing argument signatures
for external commands,
* Update run_external.rs
* Update run_external.rs
* Update run_external.rs
* Update run_external.rs
Co-authored-by: Jonathan Turner <jonathandturner@users.noreply.github.com>
* Better message error
* Use custom canonicalize in FileStructure build
* Better glob error in ls
* Use custom canonicalize, remove some duplicate code in cd.
* Enable recursive copying with patterns.
* Change test to fit new error message
* Test recursive with glob pattern
* Show that not matches were found in cp
* Fix typo in message error
* Change old canonicalize usage, follow newest changes
* Expand n dots early where tilde was also expanded.
* Remove normalize, not needed.
New function absolutize, doesn't follow links neither checks existence.
Renamed canonicalize_existing to canonicalize, works as expected.
* Remove normalize usages, change canonicalize.
* Treat strings as paths
* Making Commands match what UntaggedValue needs
* WIP
* WIP
* WIP
* Moved to expressions for conditions
* Add 'each' command to use command blocks
* More cleanup
* Add test for 'each'
* Instead use an expression block
* New 'path' module under nu-cli.
Added normalize and canonicalize method.
Added some unit tests.
* Replace old usages of normalize and canonicalize.
* Fix reading symlinks and existence logic.
* Better explained
1. Fixed a bug where `--all` wasn't showing files at the root directories.
2. More use of `Result`'s `map` and `map_err` methods.
3. Making tables be homogeneous so one can, for example, `get directories`.
Previously, if the user didn't have the appropriate permissions to execute the
binary/script, they would see "command not found", which is confusing.
This commit eliminates the `which` crate in favour of `ichwh`, which deals
better with permissions by not dealing with them at all! This is closer to the
behaviour of `which` in many shells. Permission checks are then left up to the
caller to deal with.
Mostly, making more use of `map` and `map_err` in `Result`. One benefit
is that at least one location had duplicated logic for how to map the
error, which is no longer the case after this commit.
An interruptible stream can query an `AtomicBool. If that bool is true,
the stream will no longer produce any values.
Also introducing the `Interruptible` trait, which extends any `Stream`
with the `interruptible` function, to simplify the construction and
allow chaining.
* headers plugin
* Remove plugin
* Add non-functioning headers command
* Add ability to extract headers from first row
* Refactor header extraction
* Rebuild indexmap with proper headers
* Rebuild result properly
* Compiling, probably wrapped too much?
* Refactoring
* Deal with case of empty header cell
* Deal with case of empty header cell
* Fix formatting
* Fix linting, attempt 2.
* Move whole_stream_command(Headers) to more appropriate section
* ... more linting
* Return Err(ShellError...) instead of panic, yield each row instead of entire table
* Insert Column[index] if no header info is found.
* Update error description
* Add initial test
* Add tests for headers command
* Lint test cases in headers
* Change ShellError for headers, Add sample_headers file to utils.rs
* Add empty sheet to test file
* Revert "Add empty sheet to test file"
This reverts commit a4bf38a31d.
* Show error message when given empty table
This makes the `binaries` function respect the `CARGO_TARGET_DIR` environment variable when set. If it's not present it falls back to the regular target directory used by Cargo.
there is currently a bug with invalid syntax for some of the
docker build steps, and I think this is because there are build
variables in the matrix that are not defined. This PR will
attempt to resolve this issue by defining all missing variables
for each row in the matrix.
Signed-off-by: vsoch <vsochat@stanford.edu>
* Fix '/' and '..' not being valid mv targets
If `/` or `../` is specified as the destination for `mv`, it will fail with an error message saying it's not a valid destination. This fixes it to account for the fact that `Path::file_name` return `None` when the file name evaluates to `/` or `..`. It will only take the slow(er) path if `Path::file_name` returns `None` in its initial check.
Fixes#1291
* Add test
* Add error message for csv parsing failures
* Add csv error prettyfier
* Improve readability of the error
Line 2: error is easier to understand than:
Line 2, error
* Remove unnecessary use of the format! macro
Replacing it with .to_string() fixes a clippy warning
* Improve consistency with JSON parsing errors
* Custom canonicalize method for FilesystemShell.
* Use custom canonicalize method.
Fixed missing import.
* Move function body to already impl body.
* Create test that aims to resolve.
* Utility function to detect hidden folders.
Implemented for Unix and Windows.
* Rename function argument.
* Revert "Rename function argument."
This reverts commit e7ab70f0f0.
* Add flag '--all/-a' to Ls
* Rename function argument.
* Check if flag '--all/-a' is present and path is hidden.
Replace match with map_err for glob result.
Remove redundancy in stream body.
Included comments on new stream body.
Replace async_stream::stream with async_stream::try_stream.
Minor tweaks to is_empty_dir.
Fix and refactor is_hidden_dir.
* Fix "implicit" bool coerse
* Fixed clippy errors
description:Thank you for your bug report. We are working diligently with our community to integrate our latest code base that we call [engine-q](https://github.com/nushell/engine-q). We would like your help with this by checking to see if this bug report is still needed in engine-q. Thank you for your patience while we ready the next version of nushell.
validations:
required:true
- type:textarea
id:repro
attributes:
label:How to reproduce
description:Steps to reproduce the behavior
placeholder:|
1.
2.
3.
validations:
required:true
- type:textarea
id:expected
attributes:
label:Expected behavior
description:A clear and concise description of what you expected to happen.
placeholder:I expected nu to...
validations:
required:true
- type:textarea
id:screenshots
attributes:
label:Screenshots
description:Please add any relevant screenshots here, if any
validations:
required:false
- type:textarea
id:config
attributes:
label:Configuration
description:"Please run `version | pivot key value | to md --pretty` and paste the output to show OS, features, etc."
description:"When you want a new feature for something that doesn't already exist"
body:
- type:textarea
id:problem
attributes:
label:Related problem
description:Thank you for your feature request. We are working diligently with our community to integrate our latest code base that we call [engine-q](https://github.com/nushell/engine-q). We would like your help with this by checking to see if this feature request is still needed in engine-q. Thank you for your patience while we ready the next version of nushell.
placeholder:|
A clear and concise description of what the problem is.
Example: I am trying to do [...] but [...]
validations:
required:false
- type:textarea
id:desired
attributes:
label:"Describe the solution you'd like"
description:A clear and concise description of what you want to happen.
validations:
required:true
- type:textarea
id:alternatives
attributes:
label:"Describe alternatives you've considered"
description:"A clear and concise description of any alternative solutions or features you've considered."
validations:
required:false
- type:textarea
id:context
attributes:
label:Additional context and details
description:Add any other context or screenshots about the feature request here.
close-issue-message:'This issue has been marked stale for more than 100000 days without activity. Closing this issue, but if you find that the issue is still valid, please reopen.'
close-pr-message:'This PR has been marked stale for more than 100 days without activity. Closing this PR, but if you are still working on it, please reopen.'
*Note: for a more complete guide see [The nu contributor book](https://www.nushell.sh/contributor-book/)*
For speedy contributions open it in Gitpod, nu will be pre-installed with the latest build in a VSCode like editor all from your browser.
[](https://gitpod.io/#https://github.com/nushell/nushell)
To get live support from the community see our [Discord](https://discordapp.com/invite/NtAbbGn), [Twitter](https://twitter.com/nu_shell) or file an issue or feature request here on [GitHub](https://github.com/nushell/nushell/issues/new/choose)!
<!--WIP-->
## Developing
### Set up
This is no different than other Rust projects.
```bash
git clone https://github.com/nushell/nushell
cd nushell
cargo build
```
### Useful Commands
- Build and run Nushell:
```shell
cargo build --release && cargo run --release
```
- Build and run with extra features:
```shell
cargo build --release --features=extra && cargo run --release --features=extra
```
- Run Clippy on Nushell:
```shell
cargo clippy --all --features=stable
```
- Run all tests:
```shell
cargo test --all --features=stable
```
- Run all tests for a specific command
```shell
cargo test --package nu-cli --test main -- commands::<command_name_here>
```
- Check to see if there are code formatting issues
```shell
cargo fmt --all -- --check
```
- Format the code in the project
```shell
cargo fmt --all
```
### Debugging Tips
- To view verbose logs when developing, enable the `trace` log level.
Nu will look for the plugins in your PATH on startup. While nu will have some functionality without them, for full functionality you'll need to copy them into your path so they can be loaded.
# Status
## Status
This project has reached a minimum-viable product level of quality. While contributors dogfood it as their daily driver, it may be unstable for some commands. Future releases will work to fill out missing features and improve stability. Its design is also subject to change as it matures.
This project has reached a minimum-viable product level of quality.
While contributors dogfood it as their daily driver, it may be unstable for some commands.
Future releases will work to fill out missing features and improve stability.
Its design is also subject to change as it matures.
Nu comes with a set of built-in commands (listed below). If a command is unknown, the command will shell-out and execute it (using cmd on Windows or bash on Linux and macOS), correctly passing through stdin, stdout, and stderr, so things like your daily git workflows and even `vim` will work just fine.
Nu comes with a set of built-in commands (listed below).
If a command is unknown, the command will shell-out and execute it (using cmd on Windows or bash on Linux and macOS), correctly passing through stdin, stdout, and stderr, so things like your daily git workflows and even `vim` will work just fine.
# Learning more
## Learning more
There are a few good resources to learn about Nu. There is a [book](https://www.nushell.sh/book/) about Nu that is currently in progress. The book focuses on using Nu and its core concepts.
There are a few good resources to learn about Nu.
There is a [book](https://www.nushell.sh/book/) about Nu that is currently in progress.
The book focuses on using Nu and its core concepts.
If you're a developer who would like to contribute to Nu, we're also working on a [book for developers](https://www.nushell.sh/contributor-book/) to help you get started. There are also [good first issues](https://github.com/nushell/nushell/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22) to help you dive in.
If you're a developer who would like to contribute to Nu, we're also working on a [book for developers](https://www.nushell.sh/contributor-book/) to help you get started.
There are also [good first issues](https://github.com/nushell/nushell/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22) to help you dive in.
We also have an active [Discord](https://discord.gg/NtAbbGn) and [Twitter](https://twitter.com/nu_shell) if you'd like to come and chat with us.
You can also find more learning resources in our [documentation](https://www.nushell.sh/documentation.html) site.
You can also find information on more specific topics in our [cookbook](https://www.nushell.sh/cookbook/).
Try it in Gitpod.
[](https://gitpod.io/#https://github.com/nushell/nushell)
# Installation
## Installation
## Local
### Local
Up-to-date installation instructions can be found in the [installation chapter of the book](https://www.nushell.sh/book/en/installation.html).**Windows users**: please note that Nu works on Windows 10 and does not currently have Windows 7/8.1 support.
Up-to-date installation instructions can be found in the [installation chapter of the book](https://www.nushell.sh/book/installation.html). **Windows users**: please note that Nu works on Windows 10 and does not currently have Windows 7/8.1 support.
To build Nu, you will need to use the **latest stable (1.39 or later)** version of the compiler.
To build Nu, you will need to use the **latest stable (1.51 or later)** version of the compiler.
- On Debian/Ubuntu: `apt install pkg-config libssl-dev`
Optional dependencies:
* To use Nu with all possible optional features enabled, you'll also need the following:
*on Linux (on Debian/Ubuntu): `apt install libxcb-composite0-dev libx11-dev`
- To use Nu with all possible optional features enabled, you'll also need the following:
- On Linux (on Debian/Ubuntu): `apt install libxcb-composite0-dev libx11-dev`
To install Nu via cargo (make sure you have installed [rustup](https://rustup.rs/) and the latest stable compiler via `rustup install stable`):
```
```shell
cargo install nu
```
You can also build Nu yourself with all the bells and whistles (be sure to have installed the [dependencies](https://www.nushell.sh/book/en/installation.html#dependencies) for your platform), once you have checked out this repo with git:
To install Nu via the [Windows Package Manager](https://aka.ms/winget-cli):
```
cargo build --workspace --features=stable
```shell
winget install nushell
```
## Docker
You can also build Nu yourself with all the bells and whistles (be sure to have installed the [dependencies](https://www.nushell.sh/book/installation.html#dependencies) for your platform), once you have checked out this repo with git:
If you want to pull a pre-built container, you can browse tags for the [nushell organization](https://quay.io/organization/nushell)
on Quay.io. Pulling a container would come down to:
```bash
$ docker pull quay.io/nushell/nu
$ docker pull quay.io/nushell/nu-base
```shell
cargo build --workspace --features=extra
```
Both "nu-base" and "nu" provide the nu binary, however nu-base also includes the source code at `/code`
in the container and all dependencies.
Optionally, you can also build the containers locally using the [dockerfiles provided](docker):
Nu draws inspiration from projects like PowerShell, functional programming languages, and modern CLI tools. Rather than thinking of files and services as raw streams of text, Nu looks at each input as something with structure. For example, when you list the contents of a directory, what you get back is a table of rows, where each row represents an item in that directory. These values can be piped through a series of steps, in a series of commands called a 'pipeline'.
Nu draws inspiration from projects like PowerShell, functional programming languages, and modern CLI tools.
Rather than thinking of files and services as raw streams of text, Nu looks at each input as something with structure.
For example, when you list the contents of a directory, what you get back is a table of rows, where each row represents an item in that directory.
These values can be piped through a series of steps, in a series of commands called a 'pipeline'.
## Pipelines
### Pipelines
In Unix, it's common to pipe between commands to split up a sophisticated command over multiple steps. Nu takes this a step further and builds heavily on the idea of _pipelines_. Just as the Unix philosophy, Nu allows commands to output from stdout and read from stdin. Additionally, commands can output structured data (you can think of this as a third kind of stream). Commands that work in the pipeline fit into one of three categories:
In Unix, it's common to pipe between commands to split up a sophisticated command over multiple steps.
Nu takes this a step further and builds heavily on the idea of _pipelines_.
Just as the Unix philosophy, Nu allows commands to output to stdout and read from stdin.
Additionally, commands can output structured data (you can think of this as a third kind of stream).
Commands that work in the pipeline fit into one of three categories:
* Commands that produce a stream (eg, `ls`)
* Commands that filter a stream (eg, `where type == "Directory"`)
* Commands that consume the output of the pipeline (eg, `autoview`)
- Commands that produce a stream (e.g., `ls`)
- Commands that filter a stream (eg, `where type == "Dir"`)
- Commands that consume the output of the pipeline (e.g., `autoview`)
Commands are separated by the pipe symbol (`|`) to denote a pipeline flowing left to right.
```
/home/jonathan/Source/nushell(master)> ls | where type == "Directory" | autoview
Because most of the time you'll want to see the output of a pipeline, `autoview` is assumed. We could have also written the above:
Because most of the time you'll want to see the output of a pipeline, `autoview` is assumed.
We could have also written the above:
```
/home/jonathan/Source/nushell(master)> ls | where type== Directory
```shell
> ls | where type == Dir
```
Being able to use the same commands and compose them differently is an important philosophy in Nu. For example, we could use the built-in `ps` command as well to get a list of the running processes, using the same `where` as above.
Being able to use the same commands and compose them differently is an important philosophy in Nu.
For example, we could use the built-in `ps` command to get a list of the running processes, using the same `where` as above.
```text
/home/jonathan/Source/nushell(master)> ps | where cpu > 0
Nu can load file and URL contents as raw text or as structured data (if it recognizes the format). For example, you can load a .toml file as structured data and explore it:
Nu can load file and URL contents as raw text or structured data (if it recognizes the format).
For example, you can load a .toml file as structured data and explore it:
```
/home/jonathan/Source/nushell(master)> open Cargo.toml
Finally, we can use commands outside of Nu once we have the data we want:
```
/home/jonathan/Source/nushell(master)> open Cargo.toml | get package.version | echo $it
0.9.0
```shell
> open Cargo.toml | get package.version
0.32.0
```
Here we use the variable `$it` to refer to the value being piped to the external command.
### Configuration
## Configuration
Nu has early support for configuring the shell. You can refer to the book for a list of [all supported variables](https://www.nushell.sh/book/configuration.html).
Nu has early support for configuring the shell. It currently supports the following settings:
To set one of these variables, you can use `config set`. For example:
| path | table of strings | PATH to use to find binaries |
| env | row | the environment variables to pass to external commands |
| ctrlc_exit | boolean | whether or not to exit Nu after multiple ctrl-c presses |
| table_mode | "light" or other | enable lightweight or normal tables |
| edit_mode | "vi" or "emacs" | changes line editing to "vi" or "emacs" mode |
| completion_mode | "circular" or "list" | changes completion type to "circular" (default) or "list" mode |
To set one of these variables, you can use `config --set`. For example:
```
> config --set [edit_mode "vi"]
> config --set [path $nu.path]
```shell
> config set line_editor.edit_mode "vi"
> config set path $nu.path
```
## Shells
### Shells
Nu will work inside of a single directory and allow you to navigate around your filesystem by default. Nu also offers a way of adding additional working directories that you can jump between, allowing you to work in multiple directories at the same time.
Nu will work inside of a single directory and allow you to navigate around your filesystem by default.
Nu also offers a way of adding additional working directories that you can jump between, allowing you to work in multiple directories simultaneously.
To do so, use the `enter` command, which will allow you create a new "shell" and enter it at the specified path. You can toggle between this new shell and the original shell with the `p` (for previous) and `n` (for next), allowing you to navigate around a ring buffer of shells. Once you're done with a shell, you can `exit` it and remove it from the ring buffer.
To do so, use the `enter` command, which will allow you to create a new "shell" and enter it at the specified path.
You can toggle between this new shell and the original shell with the `p` (for previous) and `n` (for next), allowing you to navigate around a ring buffer of shells.
Once you're done with a shell, you can `exit` it and remove it from the ring buffer.
Finally, to get a list of all the current shells, you can use the `shells` command.
## Plugins
### Plugins
Nu supports plugins that offer additional functionality to the shell and follow the same structured data model that built-in commands use. This allows you to extend nu for your needs.
Nu supports plugins that offer additional functionality to the shell and follow the same structured data model that built-in commands use.
This allows you to extend nu for your needs.
There are a few examples in the `plugins` directory.
Plugins are binaries that are available in your path and follow a `nu_plugin_*` naming convention. These binaries interact with nu via a simple JSON-RPC protocol where the command identifies itself and passes along its configuration, which then makes it available for use. If the plugin is a filter, data streams to it one element at a time, and it can stream data back in return via stdin/stdout. If the plugin is a sink, it is given the full vector of final data and is given free reign over stdin/stdout to use as it pleases.
Plugins are binaries that are available in your path and follow a `nu_plugin_*` naming convention.
These binaries interact with nu via a simple JSON-RPC protocol where the command identifies itself and passes along its configuration, making it available for use.
If the plugin is a filter, data streams to it one element at a time, and it can stream data back in return via stdin/stdout.
If the plugin is a sink, it is given the full vector of final data and is given free reign over stdin/stdout to use as it pleases.
# Goals
## Goals
Nu adheres closely to a set of goals that make up its design philosophy. As features are added, they are checked against these goals.
* First and foremost, Nu is cross-platform. Commands and techniques should carry between platforms and offer first-class consistent support for Windows, macOS, and Linux.
- First and foremost, Nu is cross-platform. Commands and techniques should carry between platforms and offer consistent first-class support for Windows, macOS, and Linux.
* Nu ensures direct compatibility with existing platform-specific executables that make up people's workflows.
- Nu ensures direct compatibility with existing platform-specific executables that make up people's workflows.
* Nu's workflow and tools should have the usability in day-to-day experience of using a shell in 2019 (and beyond).
- Nu's workflow and tools should have the usability in day-to-day experience of using a shell in 2019 (and beyond).
* Nu views data as both structured and unstructured. It is a structured shell like PowerShell.
- Nu views data as both structured and unstructured. It is a structured shell like PowerShell.
* Finally, Nu views data functionally. Rather than using mutation, pipelines act as a means to load, change, and save data without mutable state.
- Finally, Nu views data functionally. Rather than using mutation, pipelines act as a means to load, change, and save data without mutable state.
# Commands
## Commands
You can find a list of Nu commands, complete with documentation, in [quick command references](https://www.nushell.sh/documentation.html#quick-command-references).
You can find a list of Nu commands, complete with documentation, in [quick command references](https://www.nushell.sh/book/command_reference.html).
# License
## Progress
The project is made available under the MIT license. See "LICENSE" for more information.
Nu is in heavy development and will naturally change as it matures and people use it. The chart below isn't meant to be exhaustive, but rather helps give an idea for some of the areas of development and their relative completion:
| Features | Not started | Prototype | MVP | Preview | Mature | Notes |
These sub-crates form both the foundation for Nu and a set of plugins which extend Nu with additional functionality.
Foundational libraries are split into two kinds of crates:
* Core crates - those crates that work together to build the Nushell language engine
* Support crates - a set of crates that support the engine with additional features like JSON support, ANSI support, and more.
Plugins are likewise also split into two types:
* Core plugins - plugins that provide part of the default experience of Nu, including access to the system properties, processes, and web-connectivity features.
* Extra plugins - these plugins run a wide range of different capabilities like working with different file types, charting, viewing binary data, and more.
> This is a copy of rust-ansi-term but with Color change to Color and light foreground colors added (90-97) as well as light background colors added (100-107).
This is a library for controlling colors and formatting, such as red bold text or blue underlined text, on ANSI terminals.
### [View the Rustdoc](https://docs.rs/nu_ansi_term/)
# Installation
This crate works with [Cargo](http://crates.io). Add the following to your `Cargo.toml` dependencies section:
```toml
[dependencies]
nu_ansi_term="0.13"
```
## Basic usage
There are three main types in this crate that you need to be concerned with: `ANSIString`, `Style`, and `Color`.
A `Style` holds stylistic information: foreground and background colors, whether the text should be bold, or blinking, or other properties.
The `Color` enum represents the available colors.
And an `ANSIString` is a string paired with a `Style`.
`Color` is also available as an alias to `Color`.
To format a string, call the `paint` method on a `Style` or a `Color`, passing in the string you want to format as the argument.
For example, here’s how to get some red text:
```rust
usenu_ansi_term::Color::Red;
println!("This is in red: {}",Red.paint("a red string"));
```
It’s important to note that the `paint` method does _not_ actually return a string with the ANSI control characters surrounding it.
Instead, it returns an `ANSIString` value that has a `Display` implementation that, when formatted, returns the characters.
This allows strings to be printed with a minimum of `String` allocations being performed behind the scenes.
If you _do_ want to get at the escape codes, then you can convert the `ANSIString` to a string as you would any other `Display` value:
```rust
usenu_ansi_term::Color::Red;
letred_string=Red.paint("a red string").to_string();
```
**Note for Windows 10 users:** On Windows 10, the application must enable ANSI support first:
```rust,ignore
let enabled = nu_ansi_term::enable_ansi_support();
```
## Bold, underline, background, and other styles
For anything more complex than plain foreground color changes, you need to construct `Style` values themselves, rather than beginning with a `Color`.
You can do this by chaining methods based on a new `Style`, created with `Style::new()`.
Each method creates a new style that has that specific property set.
For example:
```rust
use nu_ansi_term::Style;
println!("How about some {} and {}?",
Style::new().bold().paint("bold"),
Style::new().underline().paint("underline"));
```
For brevity, these methods have also been implemented for `Color` values, so you can give your styles a foreground color without having to begin with an empty `Style` value:
```rust
use nu_ansi_term::Color::{Blue, Yellow};
println!("Demonstrating {} and {}!",
Blue.bold().paint("blue bold"),
Yellow.underline().paint("yellow underline"));
println!("Yellow on blue: {}", Yellow.on(Blue).paint("wow!"));
```
The complete list of styles you can use are:
`bold`, `dimmed`, `italic`, `underline`, `blink`, `reverse`, `hidden`, and `on` for background colors.
In some cases, you may find it easier to change the foreground on an existing `Style` rather than starting from the appropriate `Color`.
You can do this using the `fg` method:
```rust
use nu_ansi_term::Style;
use nu_ansi_term::Color::{Blue, Cyan, Yellow};
println!("Yellow on blue: {}", Style::new().on(Blue).fg(Yellow).paint("yow!"));
println!("Also yellow on blue: {}", Cyan.on(Blue).fg(Yellow).paint("zow!"));
```
You can turn a `Color` into a `Style` with the `normal` method.
This will produce the exact same `ANSIString` as if you just used the `paint` method on the `Color` directly, but it’s useful in certain cases: for example, you may have a method that returns `Styles`, and need to represent both the “red bold” and “red, but not bold” styles with values of the same type. The `Style` struct also has a `Default` implementation if you want to have a style with _nothing_ set.
You can access the extended range of 256 colors by using the `Color::Fixed` variant, which takes an argument of the color number to use.
This can be included wherever you would use a `Color`:
```rust
use nu_ansi_term::Color::Fixed;
Fixed(134).paint("A sort of light purple");
Fixed(221).on(Fixed(124)).paint("Mustard in the ketchup");
```
The first sixteen of these values are the same as the normal and bold standard color variants.
There’s nothing stopping you from using these as `Fixed` colors instead, but there’s nothing to be gained by doing so either.
You can also access full 24-bit color by using the `Color::RGB` variant, which takes separate `u8` arguments for red, green, and blue:
```rust
use nu_ansi_term::Color::RGB;
RGB(70, 130, 180).paint("Steel blue");
```
## Combining successive coloured strings
The benefit of writing ANSI escape codes to the terminal is that they _stack_: you do not need to end every coloured string with a reset code if the text that follows it is of a similar style.
For example, if you want to have some blue text followed by some blue bold text, it’s possible to send the ANSI code for blue, followed by the ANSI code for bold, and finishing with a reset code without having to have an extra one between the two strings.
This crate can optimise the ANSI codes that get printed in situations like this, making life easier for your terminal renderer.
The `ANSIStrings` struct takes a slice of several `ANSIString` values, and will iterate over each of them, printing only the codes for the styles that need to be updated as part of its formatting routine.
The following code snippet uses this to enclose a binary number displayed in red bold text inside some red, but not bold, brackets:
```rust
use nu_ansi_term::Color::Red;
use nu_ansi_term::{ANSIString, ANSIStrings};
let some_value = format!("{:b}", 42);
let strings: &[ANSIString<'static>] = &[
Red.paint("["),
Red.bold().paint(some_value),
Red.paint("]"),
];
println!("Value: {}", ANSIStrings(strings));
```
There are several things to note here.
Firstly, the `paint` method can take _either_ an owned `String` or a borrowed `&str`.
Internally, an `ANSIString` holds a copy-on-write (`Cow`) string value to deal with both owned and borrowed strings at the same time.
This is used here to display a `String`, the result of the `format!` call, using the same mechanism as some statically-available `&str` slices.
Secondly, that the `ANSIStrings` value works in the same way as its singular counterpart, with a `Display` implementation that only performs the formatting when required.
## Byte strings
This library also supports formatting `[u8]` byte strings; this supports applications working with text in an unknown encoding.
`Style` and `Color` support painting `[u8]` values, resulting in an `ANSIByteString`.
This type does not implement `Display`, as it may not contain UTF-8, but it does provide a method `write_to` to write the result to any value that implements `Write`:
This crate provides the fundamental needs when creating the Nushell interactive REPL. In it, you'll find features for interacting with the line editor (the piece which writes the prompt and takes input from the user), keybindings, handlers for the commandline arguments passed to the REPL as it starts up, and more.
ifletValue{value: UntaggedValue::Table(start),..}=datasets.get(0).ok_or_else(||ShellError::labeled_error("Unable to load dataset","unabled to load dataset",&name))?{
forpercentageinstart.iter(){
letmutfact=TaggedDictBuilder::new(&name);
letvalue: Tagged<String>=group_labels.get(idx).ok_or_else(||ShellError::labeled_error("Unable to load group labels","unabled to load group labels",&name))?.clone();
letstring=std::iter::repeat("*").take(num.to_i32().ok_or_else(||ShellError::labeled_error("Expected a number","expected a number",tag))?asusize).collect::<String>();
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
