shorewall_code/Shorewall/manpages/shorewall.conf.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall.conf</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>shorewall.conf</refname>

    <refpurpose>Shorewall global configuration file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/shorewall.conf</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>This file sets options that apply to Shorewall as a whole.</para>

    <para>The file consists of Shell comments (lines beginning with '#'),
    blank lines and assignment statements
    (<emphasis>variable</emphasis>=<emphasis>value</emphasis>). If the
    <emphasis>value</emphasis> contains shell meta characters or white-space,
    then it must be enclosed in quotes. Example:
    MACLIST_LOG_LEVEL="NFLOG(1,0,1)".</para>
  </refsect1>

  <refsect1>
    <title>OPTIONS</title>

    <para>Many options have as their value a <emphasis>log-level</emphasis>.
    Log levels are a method of describing to syslog (8) the importance of a
    message and a number of parameters in this file have log levels as their
    value.</para>

    <para>These levels are defined by syslog and are used to determine the
    destination of the messages through entries in /etc/syslog.conf (5). The
    syslog documentation refers to these as "priorities"; Netfilter calls them
    "levels" and Shorewall also uses that term.</para>

    <para>Valid levels are:</para>

    <programlisting>       7       debug
       6       info
       5       notice
       4       warning
       3       err
       2       crit
       1       alert
       0       emerg</programlisting>

    <para>For most Shorewall logging, a level of 6 (info) is appropriate.
    Shorewall log messages are generated by NetFilter and are logged using
    facility 'kern' and the level that you specify. If you are unsure of the
    level to choose, 6 (info) is a safe bet. You may specify levels by name or
    by number.</para>

    <para>If you have built your kernel with ULOG and/or NFLOG target support,
    you may also specify a log level of ULOG and/or NFLOG (must be all caps).
    Rather than log its messages to syslogd, Shorewall will direct netfilter
    to log the messages via the ULOG or NFLOG target which will send them to a
    process called 'ulogd'. ulogd is available with most Linux distributions
    (although it probably isn't installed by default). Ulogd is also available
    from <ulink
    url="http://www.netfilter.org/projects/ulogd/index.html">http://www.netfilter.org/projects/ulogd/index.html</ulink>
    and can be configured to log all Shorewall messages to their own log
    file.</para>

    <note>
      <para>If you want to specify parameters to ULOG or NFLOG (e.g.,
      NFLOG(1,0,1)), then you must either quote the setting or you must escape
      the parentheses.</para>

      <para>Examples:</para>

      <programlisting>MACLIST_LOG_LEVEL="NFLOG(1,0,1)"</programlisting>

      <para>or</para>

      <programlisting>MACLIST_LOG_LEVEL=NFLOG\(1,0,1\)</programlisting>
    </note>

    <para>Beginning with Shorewall 4.4.22, LOGMARK is also a valid level which
    logs the packet's mark value along with the other usual information. The
    syntax is:</para>

    <simplelist>
      <member><emphasis
      role="bold">LOGMARK[</emphasis><replaceable>(priority)</replaceable><emphasis
      role="bold">]</emphasis></member>
    </simplelist>

    <para>where <replaceable>priority</replaceable> is one of the levels
    listed in the list above. If omitted, the default is info (6).</para>

    <para>The following options may be set in shorewall.conf.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis
        role="bold">ACCEPT_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
        role="bold">none</emphasis>}</term>

        <listitem>
          <para></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">DROP_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
        role="bold">none</emphasis>}</term>

        <listitem>
          <para></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">NFQUEUE_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
        role="bold">none</emphasis>}</term>

        <listitem>
          <para></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">QUEUE_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
        role="bold">none</emphasis>}</term>

        <listitem>
          <para></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">REJECT_DEFAULT=</emphasis>{<emphasis>action</emphasis>[(<replaceable>parameters</replaceable>)][:<replaceable>level</replaceable>]|<emphasis
        role="bold">none</emphasis>}</term>

        <listitem>
          <para>In earlier Shorewall versions, a "default action" for DROP and
          REJECT policies was specified in the file
          /usr/share/shorewall/actions.std.</para>

          <para>In Shorewall 4.4.0, the DROP_DEFAULT, REJECT_DEFAULT,
          ACCEPT_DEFAULT, QUEUE_DEFAULT and NFQUEUE_DEFAULT options were
          added.</para>

          <para>DROP_DEFAULT describes the rules to be applied before a
          connection request is dropped by a DROP policy; REJECT_DEFAULT
          describes the rules to be applied if a connection request is
          rejected by a REJECT policy. The other three are similar for ACCEPT,
          QUEUE and NFQUEUE policies.</para>

          <para>The value applied to these may be:</para>

          <para>The default values are:</para>

          <simplelist>
            <member>DROP_DEFAULT="Drop"</member>

            <member>REJECT_DEFAULT="Reject"</member>

            <member>ACCEPT_DEFAULT="none"</member>

            <member>QUEUE_DEFAULT="none"</member>

            <member>NFQUEUE_DEFAULT="None"</member>
          </simplelist>

          <para>If you set the value of either option to "None" then no
          default action will be used and the default action or macro must be
          specified in <ulink
          url="shorewall-policy.html">shorewall-policy</ulink>(5).</para>

          <para>You can pass <replaceable>parameters</replaceable> to the
          specified action (e.g.,
          <emphasis>myaction(audit,DROP)</emphasis>).</para>

          <para>Beginning with Shorewall 4.5.10, the action name can be
          followed optionally by a colon and a log
          <replaceable>level</replaceable>. The level will be applied to each
          rule in the action or body that does not already have a log
          level.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ACCOUNTING=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.7. If set to Yes, Shorewall accounting
          is enabled (see <ulink
          url="shorewall-accounting.html">shorewall-accounting</ulink>(5)). If
          not specified or set to the empty value, ACCOUNTING=Yes is
          assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ACCOUNTING_TABLE=</emphasis>[<emphasis
        role="bold">filter</emphasis>|<emphasis
        role="bold">mangle</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.20. This setting determines which
          Netfilter table the accounting rules are added in. By default,
          ACCOUNTING_TABLE=filter is assumed. See also <ulink
          url="shorewall-accounting.html">shorewall-accounting</ulink>(5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ADD_IP_ALIASES=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>This parameter determines whether Shorewall automatically adds
          the external address(es) in <ulink
          url="shorewall-nat.html">shorewall-nat</ulink>(5). If the variable
          is set to <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis> then Shorewall automatically adds these
          aliases. If it is set to <emphasis role="bold">No</emphasis> or
          <emphasis role="bold">no</emphasis>, you must add these aliases
          yourself using your distribution's network configuration
          tools.</para>

          <para>If this variable is not set or is given an empty value
          (ADD_IP_ALIASES="") then ADD_IP_ALIASES=Yes is assumed.</para>

          <warning>
            <para>Addresses added by ADD_IP_ALIASES=Yes are deleted and
            re-added during shorewall restart. As a consequence, connections
            using those addresses may be severed.</para>
          </warning>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ADD_SNAT_ALIASES=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>This parameter determines whether Shorewall automatically adds
          the SNAT ADDRESS in <ulink
          url="shorewall-masq.html">shorewall-masq</ulink>(5). If the variable
          is set to <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis> then Shorewall automatically adds these
          addresses. If it is set to <emphasis role="bold">No</emphasis> or
          <emphasis role="bold">no</emphasis>, you must add these addresses
          yourself using your distribution's network configuration
          tools.</para>

          <para>If this variable is not set or is given an empty value
          (ADD_SNAT_ALIASES="") then ADD_SNAT_ALIASES=No is assumed.</para>

          <warning>
            <para>Addresses added by ADD_SNAT_ALIASES=Yes are deleted and
            re-added during shorewall restart. As a consequence, connections
            using those addresses may be severed.</para>
          </warning>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ADMINISABSENTMINDED=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>The value of this variable affects Shorewall's stopped state.
          When ADMINISABSENTMINDED=No, only traffic to/from those addresses
          listed in <ulink
          url="shorewall-routestopped.html">shorewall-routestopped</ulink>(5)
          is accepted when Shorewall is stopped. When ADMINISABSENTMINDED=Yes,
          in addition to traffic to/from addresses in <ulink
          url="shorewall-routestopped.html">shorewall-routestopped</ulink>(5),
          connections that were active when Shorewall stopped continue to work
          and all new connections from the firewall system itself are allowed.
          If this variable is not set or is given the empty value then
          ADMINISABSENTMINDED=No is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">ARPTABLES=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.12. This parameter names the arptables
          executable to be used by Shorewall. If not specified or if specified
          as a null value, then the arptables executable located using the
          PATH option is used.</para>

          <para>Regardless of how the arptables utility is located (specified
          via arptables= or located via PATH), Shorewall uses the
          arptables-restore and arptables-save utilities from that same
          directory.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">AUTOCOMMENT=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Formerly named AUTO_COMMENT. If set, if there is not a current
          comment when a macro is invoked, the behavior is as if the first
          line of the macro file was "COMMENT &lt;macro name&gt;". The
          AUTO_COMMENT option has a default value of 'Yes'.</para>

          <para>The setting of the AUTOMAKE option is ignored if the
          <command>start</command> or <command>restart</command> command
          includes a directory name (e.g.,<command> shorewall restart
          /etc/shorewall.new</command>).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">AUTOHELPERS=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.7. When set to <option>Yes</option>
          (the default), the generated ruleset will automatically associate
          helpers with applications that require them (FTP, IRC, etc.). When
          configuring your firewall on systems running kernel 3.5 or later, it
          is recommended that you:</para>

          <orderedlist>
            <listitem>
              <para>Set AUTOHELPERS=No.</para>
            </listitem>

            <listitem>
              <para>Either:</para>

              <orderedlist numeration="loweralpha">
                <listitem>
                  <para>Modify <ulink
                  url="shorewall-conntrack.html">shorewall-conntrack</ulink>
                  (5) to only apply helpers where they are required; or</para>
                </listitem>

                <listitem>
                  <para>Specify the appropriate helper in the HELPER column in
                  <ulink url="shorewall-rules.html">shorewall-rules</ulink>
                  (5).</para>

                  <note>
                    <para>The macros for those applications requiring a helper
                    automatically specify the appropriate HELPER where
                    required.</para>
                  </note>
                </listitem>
              </orderedlist>
            </listitem>
          </orderedlist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">AUTOMAKE=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>If set, the behavior of the 'start' command is changed; if no
          files in /etc/shorewall have been changed since the last successful
          <command>start</command> or <command>restart</command> command, then
          the compilation step is skipped and the compiled script that
          executed the last <command>start</command> or
          <command>restart</command> command is used. The default is
          AUTOMAKE=No.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">BLACKLIST=</emphasis>[{<emphasis
        role="bold">ALL</emphasis>|<emphasis
        role="bold"><replaceable>state</replaceable>[,...]</emphasis>}]</term>

        <listitem>
          <para>where state is one of NEW, ESTABLISHED, RELATED, INVALID,or
          UNTRACKED.</para>

          <para>Added in Shorewall 4.5.13 to replace the BLACKLISTNEWONLY
          option below. Specifies the connection tracking states that are to
          be subject to blacklist screening. If neither BLACKLIST nor
          BLACKLISTNEWONLY are specified then the states subject to
          blacklisting are NEW,ESTABLISHED,INVALID,UNTRACKED.</para>

          <para>ALL sends all packets through the blacklist chains.</para>

          <para>Note: The ESTABLISHED state may not be specified if FASTACCEPT
          is specified.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">BLACKLIST_DISPOSITION=</emphasis>[<emphasis
        role="bold">DROP</emphasis>|A_DROP|<emphasis
        role="bold">REJECT|A_REJECT</emphasis>]</term>

        <listitem>
          <para>This parameter determines the disposition of packets from
          blacklisted hosts. It may have the value DROP if the packets are to
          be dropped or REJECT if the packets are to be replied with an ICMP
          port unreachable reply or a TCP RST (tcp only). If you do not assign
          a value or if you assign an empty value then DROP is assumed.</para>

          <para>A_DROP and A_REJECT are audited versions of DROP and REJECT
          respectively and were added in Shorewall 4.4.20. They require
          AUDIT_TARGET in the kernel and iptables.</para>

          <para>The BLACKLIST_DISPOSITION setting has no effect on entries in
          the BLACKLIST section of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink> (5). It
          determines the disposition of packets sent to the <emphasis
          role="bold">blacklog</emphasis> target of <ulink
          url="shorewall-blrules.html">shorewall-blrules </ulink>(5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">BLACKLIST_LOG_LEVEL=</emphasis>[<emphasis>log-level</emphasis>]</term>

        <listitem>
          <para>Formerly named BLACKLIST_LOGLEVEL. This parameter determines
          if packets from blacklisted hosts are logged and it determines the
          syslog level that they are to be logged at. Its value is a syslog
          level (Example: BLACKLIST_LOG_LEVEL=debug). If you do not assign a
          value or if you assign an empty value then packets from blacklisted
          hosts are not logged. The setting determines the log level of
          packets sent to the <emphasis role="bold">blacklog</emphasis> target
          of <ulink
          url="shorewall-blrules.html">shorewall-blrules</ulink>(5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">BLACKLISTNEWONLY=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Deprecated in Shorewall 4.5.13 in favor of BLACKLIST
          above.</para>

          <para>When set to <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis>, blacklists are only consulted for new
          connections and for packets in the INVALID connection state (such as
          TCP SYN,ACK when there has been no corresponding SYN). That includes
          entries in the <ulink url="???">shorewall-blrules</ulink> (5) file
          and in the BLACKLIST section of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink> (5).</para>

          <para>When set to <emphasis role="bold">No</emphasis> or <emphasis
          role="bold">no</emphasis>, blacklists are consulted for every packet
          (will slow down your firewall noticeably if you have large
          blacklists). If the BLACKLISTNEWONLY option is not set or is set to
          the empty value then BLACKLISTNEWONLY=No is assumed.</para>

          <note>
            <para>BLACKLISTNEWONLY=No is incompatible with
            FASTACCEPT=Yes.</para>
          </note>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">CHAIN_SCRIPTS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.5.16. Prior to the availability of BEGIN
          PERL....END PERL in configuration files, the only way to execute a
          chain-specific script was to create a script file with the same name
          as the chain and place it in a directory on the CONFIG_PATH. That
          facility has the drawback that the compiler will attempt to run a
          non-script file just because it has the same name as a chain. To
          disable this facility, set CHAIN_SCRIPTS=No. If not specified or
          specified as the empty value, CHAIN_SCRIPTS=Yes is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">CLAMPMSS=[</emphasis><emphasis
        role="bold">Yes</emphasis>|<emphasis
        role="bold">No</emphasis>|<emphasis>value</emphasis>]</term>

        <listitem>
          <para>This parameter enables the TCP Clamp MSS to PMTU feature of
          Netfilter and is usually required when your internet connection is
          through PPPoE or PPTP. If set to <emphasis
          role="bold">Yes</emphasis> or <emphasis role="bold">yes</emphasis>,
          the feature is enabled. If left blank or set to <emphasis
          role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
          the feature is not enabled.</para>

          <para><emphasis role="bold">Important</emphasis>: This option
          requires CONFIG_IP_NF_TARGET_TCPMSS in your kernel.</para>

          <para>You may also set CLAMPMSS to a numeric
          <emphasis>value</emphasis> (e.g., CLAMPMSS=1400). This will set the
          MSS field in TCP SYN packets going through the firewall to the
          <emphasis>value</emphasis> that you specify.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">CLEAR_TC=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>If this option is set to <emphasis role="bold">No</emphasis>
          then Shorewall won't clear the current traffic control rules during
          [re]start. This setting is intended for use by people who prefer to
          configure traffic shaping when the network interfaces come up rather
          than when the firewall is started. If that is what you want to do,
          set TC_ENABLED=Yes and CLEAR_TC=No and do not supply an
          /etc/shorewall/tcstart file. That way, your traffic shaping rules
          can still use the “fwmark” classifier based on packet marking
          defined in <ulink
          url="shorewall-tcrules.html">shorewall-tcrules</ulink>(5). If not
          specified, CLEAR_TC=Yes is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">COMPLETE=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.12. When you set this option to Yes,
          you are asserting that the configuration is complete so that your
          set of zones encompasses any hosts that can send or receive traffic
          to/from/through the firewall. This causes Shorewall to omit the
          rules that catch packets in which the source or destination IP
          address is outside of any of your zones. Default is No. It is
          recommended that this option only be set to Yes if:</para>

          <itemizedlist>
            <listitem>
              <para>You have defined an interface whose effective physical
              setting is '+'.</para>
            </listitem>

            <listitem>
              <para>That interface is assigned to a zone.</para>
            </listitem>

            <listitem>
              <para>You have no CONTINUE policies or rules.</para>
            </listitem>
          </itemizedlist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">CONFIG_PATH</emphasis>=[<emphasis>directory</emphasis>[:<emphasis>directory</emphasis>]...]</term>

        <listitem>
          <para>Specifies where configuration files other than shorewall.conf
          may be found. CONFIG_PATH is specifies as a list of directory names
          separated by colons (":"). When looking for a configuration file
          other than shorewall.conf:</para>

          <itemizedlist>
            <listitem>
              <para>If the command is "try" or a "&lt;configuration
              directory&gt;" was specified in the command (e.g.,
              <command>shorewall check ./gateway</command>) then the directory
              given in the command is searched first.</para>
            </listitem>

            <listitem>
              <para>Next, each directory in the CONFIG_PATH setting is
              searched in sequence.</para>
            </listitem>
          </itemizedlist>

          <para>If CONFIG_PATH is not given or if it is set to the empty value
          then the contents of /usr/share/shorewall/configpath are used. As
          released from shorewall.net, that file sets the CONFIG_PATH to
          /etc/shorewall:/usr/share/shorewall but your particular distribution
          may set it differently. See the output of shorewall show config for
          the default on your system.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DEFER_DNS_RESOLUTION=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.12. When set to 'Yes' (the default),
          DNS names are validated in the compiler and then passed on to the
          generated script where they are resolved by iptables-restore. This
          is an advantage if you use AUTOMAKE=Yes and the IP address
          associated with the DNS name is subject to change. When
          DEFER_DNS_RESOLUTION=No, DNS names are converted into IP addresses
          by the compiler. This has the advantage that when AUTOMAKE=Yes, the
          <command>start</command> and <command>restart</command> commands
          will succeed even if no DNS server is reachable (assuming that the
          configuration hasn't changed since the compiled script was last
          generated).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DELETE_THEN_ADD=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>If set to Yes (the default value), entries in the
          /etc/shorewall/route_stopped files cause an 'ip rule del' command to
          be generated in addition to an 'ip rule add' command. Setting this
          option to No, causes the 'ip rule del' command to be omitted.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DETECT_DNAT_IPADDRS=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>If set to <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis>, Shorewall will detect the first IP
          address of the interface to the source zone and will include this
          address in DNAT rules as the original destination IP address. If set
          to <emphasis role="bold">No</emphasis> or <emphasis
          role="bold">no</emphasis>, Shorewall will not detect this address
          and any destination IP address will match the DNAT rule. If not
          specified or empty, “DETECT_DNAT_IPADDRS=Yes” is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DISABLE_IPV6=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>If set to <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis>, IPv6 traffic to, from and through the
          firewall system is disabled. If set to <emphasis
          role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
          Shorewall will take no action with respect to allowing or
          disallowing IPv6 traffic. If not specified or empty,
          “DISABLE_IPV6=No” is assumed.</para>

          <para>It is important to note that changing DISABLE_IPV6=Yes to
          DISABLE_IPV6=No does <emphasis>not</emphasis> enable IPV6. The
          recommended approach for enabling IPv6 on your system is:</para>

          <itemizedlist>
            <listitem>
              <para>Install, configure and start <ulink
              url="../IPv6Support.html">Shorewall6</ulink>.</para>
            </listitem>

            <listitem>
              <para>Change DISABLE_IPV6=Yes to DISABLE_IPV6=No</para>
            </listitem>

            <listitem>
              <para>Restart Shorewall</para>
            </listitem>
          </itemizedlist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">DONT_LOAD=</emphasis>[<emphasis>module</emphasis>[,<emphasis>module</emphasis>]...]</term>

        <listitem>
          <para>Causes Shorewall to not load the listed kernel modules.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">DYNAMIC_BLACKLIST=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.4.7. When set to <emphasis
          role="bold">No</emphasis> or <emphasis role="bold">no</emphasis>,
          dynamic blacklisting using the <command>shorewall drop</command>,
          <command>shorewall reject</command>, <command>shorewall
          logdrop</command> and <command>shorewall logreject</command> is
          disabled. Default is <emphasis role="bold">Yes</emphasis>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">EXPAND_POLICIES=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Normally, when the SOURCE or DEST columns in
          shorewall-policy(5) contains 'all', a single policy chain is created
          and the policy is enforced in that chain. For example, if the policy
          entry is<programlisting>#SOURCE DEST POLICY LOG
#                   LEVEL
net     all  DROP   info</programlisting>then the chain name is 'net2all'
          which is also the chain named in Shorewall log messages generated as
          a result of the policy. If EXPAND_POLICIES=Yes, then Shorewall will
          create a separate chain for each pair of zones covered by the
          policy. This makes the resulting log messages easier to interpret
          since the chain in the messages will have a name of the form 'a2b'
          where 'a' is the SOURCE zone and 'b' is the DEST zone.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">EXPORTMODULES=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.17. When set to Yes when compiling for
          use by Shorewall Lite (<command>shorewall load</command>,
          <command>shorewall reload </command>or <command>shorewall
          export</command> commands), the compiler will copy the modules or
          helpers file from the administrative system into the script. When
          set to No or not specified, the compiler will not copy the modules
          or helpers file from <filename>/usr/share/shorewall</filename> but
          will copy the found in another location on the CONFIG_PATH.</para>

          <para>When compiling for direct use by Shorewall, causes the
          contents of the local module or helpers file to be copied into the
          compiled script. When set to No or not set, the compiled script
          reads the file itself.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">EXPORTPARAMS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Deprecated in Shorewall 4.4.17.</para>

          <para>Beginning with Shorewall 4.4.17, the variables set in the
          'params' file at compile time are available at run time with
          EXPORTPARAMS=No. As a consequence, beginning with that version the
          recommended setting is EXPORTPARAMS=No.</para>

          <para>It is quite difficult to code a 'params' file that assigns
          other than constant values such that it works correctly with
          Shorewall Lite. The EXPORTPARAMS option works around this problem.
          When EXPORTPARAMS=No, the 'params' file is not copied to the
          compiler output.</para>

          <para>With EXPORTPARAMS=No, if you need to set environmental
          variables on the firewall system for use by your extension scripts,
          then do so in the init extension script.</para>

          <para>The default is EXPORTPARAMS=Yes which is the recommended
          setting unless you are using Shorewall Lite.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">FASTACCEPT=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Normally, Shorewall defers accepting ESTABLISHED/RELATED
          packets until these packets reach the chain in which the original
          connection was accepted. So for packets going from the 'loc' zone to
          the 'net' zone, ESTABLISHED/RELATED packets are ACCEPTED in the
          'loc2net' chain.</para>

          <para>If you set FASTACCEPT=Yes, then ESTABLISHED/RELATED packets
          are accepted early in the INPUT, FORWARD and OUTPUT chains. If you
          set FASTACCEPT=Yes then you may not include rules in the ESTABLISHED
          or RELATED sections of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink>(5).</para>

          <note>
            <para>FASTACCEPT=Yes is incompatible with
            BLACKLISTNEWONLY=No.</para>
          </note>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">FORWARD_CLEAR_MARK=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.4.11 Beta 3. Traditionally, Shorewall has
          cleared the packet mark in the first rule in the mangle FORWARD
          chain. This behavior is maintained with the default setting of this
          option (FORWARD_CLEAR_MARK=Yes). If FORWARD_CLEAR_MARK is set to
          'No', packet marks set in the mangle PREROUTING chain are retained
          in the FORWARD chains.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">GEOIPDIR</emphasis>=[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.4. Specifies the pathname of the
          directory containing the <firstterm>GeoIP Match</firstterm>
          database. See <ulink
          url="http://www.shorewall.net/ISO-3661.html">http://www.shorewall.net/ISO-3661.html</ulink>.
          If not specified, the default value is
          <filename>/usr/share/xt_geoip/LE</filename> which is the default
          location of the little-endian database.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">HELPERS</emphasis>=[<emphasis>helper</emphasis>[,<replaceable>helper</replaceable>...]]</term>

        <listitem>
          <para>Added in Shorewall 4.5.7. This option lists the Netfilter
          application helps that are to be enabled. If not specified, the
          default is to enable all helpers.</para>

          <para>Possible values for <replaceable>helper</replaceable>
          are:</para>

          <itemizedlist>
            <listitem>
              <para><emphasis role="bold">amanda</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">ftp</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">h323</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">irc</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">netbios-ns</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">none</emphasis> - This special value
              was added in Shorewall 4.5.16 and indicates that no helpers are
              to be enabled. It also prevents the compiler for probing for
              helper support; such probing generates messages on the system
              log of the form "xt_CT: No such helper XXX" where XXX is the
              helper name. When used, <emphasis role="bold">none</emphasis>
              must be the only helper specified.</para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">pptp</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">sane</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">sip</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">snmp</emphasis></para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">tftp</emphasis></para>
            </listitem>
          </itemizedlist>

          <para>When HELPERS is specified on a system running Kernel 3.5.0 or
          later, automatic association of helpers to connections is
          disabled.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">HIGH_ROUTE_MARKS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Deprecated in Shorewall 4.4.26 in favor of
          PROVIDER_OFFSET.</para>

          <para>Prior to version 3.2.0, it was not possible to use connection
          marking in <ulink
          url="shorewall-tcrules.html">shorewall-tcrules</ulink>(5) if you had
          a multi-ISP configuration that uses the track option.</para>

          <para>You may set HIGH_ROUTE_MARKS=Yes in to effectively divide the
          packet mark and connection mark into two mark fields.</para>

          <para>The width of the fields are determined by the setting of
          WIDE_TC_MARKS. If WIDE_TC_MARKS=No (the default):</para>

          <orderedlist numeration="loweralpha">
            <listitem>
              <para>The MARK field in the providers file must have a value
              that is less than 65536 and that is a multiple of 256 (using hex
              representation, the values are 0x0100-0xFF00 with the low-order
              8 bits being zero).</para>
            </listitem>

            <listitem>
              <para>You may only set those mark values in the PREROUTING
              chain.</para>
            </listitem>

            <listitem>
              <para>Marks used for traffic shaping must still be in the range
              of 1-255 and may still not be set in the PREROUTING
              chain.</para>
            </listitem>
          </orderedlist>

          <para>When WIDE_TC_MARKS=Yes:</para>

          <orderedlist numeration="loweralpha">
            <listitem>
              <para>The MARK field in the providers file must have a value
              that is a multiple of 65536 (using hex representation, the
              values are 0x010000-0xFF0000 with the low-order 16 bits being
              zero).</para>
            </listitem>

            <listitem>
              <para>You may only set those mark values in the PREROUTING
              chain.</para>
            </listitem>

            <listitem>
              <para>Marks used for traffic shaping must be in the range of
              1-16383 and may still not be set in the PREROUTING chain.</para>
            </listitem>
          </orderedlist>

          <para>Regardless of the setting of WIDE_TC_MARKS, when you SAVE or
          RESTORE in tcrules, only the TC mark value is saved or restored.
          Shorewall handles saving and restoring the routing (provider)
          marks.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">IGNOREUNKNOWNVARIABLES=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.11. Normally, if an unknown shell
          variable is encountered in a configuration file (except in ?IF and
          ?ELSIF directives), the compiler raises a fatal error. If
          IGNOREUNKNOWNVARIABLES is set to <emphasis
          role="bold">Yes</emphasis>, then such variables simply expand to an
          empty string. Default is <emphasis role="bold">No</emphasis>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">IMPLICIT_CONTINUE=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>When this option is set to <emphasis
          role="bold">Yes</emphasis>, it causes subzones to be treated
          differently with respect to policies.</para>

          <para>Subzones are defined by following their name with ":" and a
          list of parent zones (in <ulink
          url="shorewall-zones.html">shorewall-zones</ulink>(5)). Normally,
          you want to have a set of special rules for the subzone and if a
          connection doesn't match any of those subzone-specific rules then
          you want the parent zone rules and policies to be applied; see
          <ulink url="shorewall-nesting.html">shorewall-nesting</ulink>(5).
          With IMPLICIT_CONTINUE=Yes, that happens automatically.</para>

          <para>If IMPLICIT_CONTINUE=No or if IMPLICIT_CONTINUE is not set,
          then subzones are not subject to this special treatment. With
          IMPLICIT_CONTINUE=Yes, an implicit CONTINUE policy may be overridden
          by including an explicit policy (one that does not specify "all" in
          either the SOURCE or the DEST columns).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">INVALID_DISPOSITION=[A_DROP|A_REJECT|DROP|REJECT|CONTINUE]</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.5.13. Shorewall has traditionally passed
          INVALID packets through the NEW section of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink> (5). When a
          packet in INVALID state fails to match any rule in the INVALID
          section, the packet is disposed of based on this setting. The
          default value is CONTINUE for compatibility with earlier
          versions.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">INVALID_LOG_LEVEL=</emphasis><emphasis>log-level</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.5.13. Packets in the INVALID state that
          do not match any rule in the INVALID section of <ulink
          url="manpages/shorewall-rules.html">shorewall-rules</ulink> (5) are
          logged at this level. The default value is empty which means no
          logging is performed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">IP</emphasis>=[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>If specified, gives the pathname of the 'ip' executable. If
          not specified, 'ip' is assumed and the utility will be located using
          the current PATH setting.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">IP_FORWARDING=</emphasis>[<emphasis
        role="bold">On</emphasis>|<emphasis
        role="bold">Off</emphasis>|<emphasis
        role="bold">Keep</emphasis>]</term>

        <listitem>
          <para>This parameter determines whether Shorewall enables or
          disables IPV4 Packet Forwarding (/proc/sys/net/ipv4/ip_forward).
          Possible values are:</para>

          <variablelist>
            <varlistentry>
              <term><emphasis role="bold">On</emphasis> or <emphasis
              role="bold">on</emphasis></term>

              <listitem>
                <para>packet forwarding will be enabled.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">Off</emphasis> or <emphasis
              role="bold">off</emphasis></term>

              <listitem>
                <para>packet forwarding will be disabled.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">Keep</emphasis> or <emphasis
              role="bold">keep</emphasis></term>

              <listitem>
                <para>Shorewall will neither enable nor disable packet
                forwarding.</para>
              </listitem>
            </varlistentry>
          </variablelist>

          <para></para>

          <blockquote>
            <para>If this variable is not set or is given an empty value
            (IP_FORWARD="") then IP_FORWARD=On is assumed.</para>
          </blockquote>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">IPSECFILE=zones</emphasis></term>

        <listitem>
          <para>This option indicates that zone-related ipsec information is
          found in the zones file (<ulink
          url="shorewall-zones.html">shorewall-zones</ulink>(5)). The option
          indicates to the compiler that this is not a legacy configuration
          where the ipsec information was contained in a separate file. The
          value of this option must not be changed and the option must not be
          deleted.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">IPSET</emphasis>=[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>If specified, gives the pathname of the 'ipset' executable. If
          not specified, 'ipset' is assumed and the utility will be located
          using the current PATH setting.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">IPSET_WARNINGS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.5.2. Default is Yes. When set, causes the
          rules compiler to issue a warning when:</para>

          <itemizedlist>
            <listitem>
              <para>The compiler is being run by root and an ipset specified
              in the configuration does not exists. Only one warning is issued
              for each missing ipset.</para>
            </listitem>

            <listitem>
              <para>When [src] is specified in a destination column and when
              [dst] is specified in a source column.</para>
            </listitem>
          </itemizedlist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">IPTABLES=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>This parameter names the iptables executable to be used by
          Shorewall. If not specified or if specified as a null value, then
          the iptables executable located using the PATH option is
          used.</para>

          <para>Regardless of how the iptables utility is located (specified
          via IPTABLES= or located via PATH), Shorewall uses the
          iptables-restore and iptables-save utilities from that same
          directory.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">KEEP_RT_TABLES=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>When set to <option>Yes</option>, this option prevents
          generated scripts from altering the /etc/iproute2/rt_tables database
          when there are entries in
          <filename>/etc/shorewall/providers</filename>. If you set this
          option to <option>Yes</option> while Shorewall (Shorewall-lite) is
          running, you should remove the file
          <filename>/var/lib/shorewall/rt_tables</filename>
          (<filename>/var/lib/shorewall-lite/rt_tables</filename>) before your
          next <command>stop</command>, <command>refresh</command>,
          <command>restore</command> on <command>restart</command>
          command.</para>

          <para>The default is KEEP_RT_TABLES=No.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">LEGACY_FASTSTART=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.4.20. If not specified, the default is
          Yes which preserves the legacy behavior of <command>start
          -f</command> (the modification times of the files in
          <filename>/etc/shorewall</filename> are compare with that of
          <filename>/var/lib/shorewall/restore)</filename>. If set to No, then
          the times are compared with that of /var/lib/shorewall/firewall,
          which is consistent with the way that <command>restart -f</command>
          works.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">LOAD_HELPERS_ONLY=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.4.7. When set to Yes, restricts the set
          of modules loaded by shorewall to those listed in
          /var/lib/shorewall/helpers and those that are actually used. When
          not set, or set to the empty value, LOAD_HELPERS_ONLY=No is
          assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOCKFILE</emphasis>=[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>Specifies the name of the Shorewall lock file, used to prevent
          simultaneous state-changing commands. If not specified,
          ${VARDIR}/shorewall/lock is assumed (${VARDIR} is normally /var/lib
          but can be changed when Shorewall-core is installed -- see the
          output of <command>shorewall show vardir</command>).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">LOG_MARTIANS=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis
        role="bold">No</emphasis>|Keep]</term>

        <listitem>
          <para>If set to <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis>, sets
          <filename>/proc/sys/net/ipv4/conf/*/log_martians</filename> to 1
          with the exception of
          <filename>/proc/sys/net/ipv4/conf/all/log_martians which is set to
          0</filename>. The default value is <emphasis
          role="bold">Yes</emphasis> which sets both of the above to one. If
          you do not enable martian logging for all interfaces, you may still
          enable it for individual interfaces using the <emphasis
          role="bold">logmartians</emphasis> interface option in <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5).</para>

          <para>The value <emphasis role="bold">Keep</emphasis> causes
          Shorewall to ignore the option. If the option is set to <emphasis
          role="bold">Yes</emphasis>, then martians are logged on all
          interfaces. If the option is set to <emphasis
          role="bold">No</emphasis>, then martian logging is disabled on all
          interfaces except those specified in <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOG_VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>

        <listitem>
          <para>This option controls the amount of information logged to the
          file specified in the STARTUP_LOG option.</para>

          <para>Values are:</para>

          <simplelist>
            <member>-1 - Logging is disabled</member>

            <member>0 - Silent. Only error messages are logged.</member>

            <member>1 - Major progress messages logged.</member>

            <member>2 - All progress messages logged</member>
          </simplelist>

          <para>If not specified, then -1 is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOGALLNEW=</emphasis>[<emphasis>log-level</emphasis>]</term>

        <listitem>
          <para>This option is intended for use as a debugging aid. When set
          to a log level, this option causes Shorewall to generate a logging
          rule as the first rule in each builtin chain.</para>

          <itemizedlist>
            <listitem>
              <para>The table name is used as the chain name in the log
              prefix.</para>
            </listitem>

            <listitem>
              <para>The chain name is used as the target in the log
              prefix.</para>
            </listitem>
          </itemizedlist>

          <para></para>

          <blockquote>
            <para>For example, using the default LOGFORMAT, the log prefix for
            logging from the nat table's PREROUTING chain is:</para>

            <programlisting>    Shorewall:nat:PREROUTING
 </programlisting>

            <important>
              <para>To help insure that all packets in the NEW state are
              logged, rate limiting (LOGBURST and LOGRATE) should be disabled
              when using LOGALLNEW. Use LOGALLNEW at your own risk; it may
              cause high CPU and disk utilization and you may not be able to
              control your firewall after you enable this option.</para>
            </important>

            <para></para>

            <caution>
              <para>Do not use this option if the resulting log messages will
              be sent to another system.</para>
            </caution>
          </blockquote>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOGFILE=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>This parameter tells the /sbin/shorewall program where to look
          for Shorewall messages when processing the <emphasis
          role="bold">dump</emphasis>, <emphasis
          role="bold">logwatch</emphasis>, <emphasis role="bold">show
          log</emphasis>, and <emphasis role="bold">hits</emphasis> commands.
          If not assigned or if assigned an empty value, /var/log/messages is
          assumed. For further information, see <ulink
          url="http://www.shorewall.net/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">LOGFORMAT=</emphasis>[<emphasis
        role="bold">"</emphasis><emphasis>formattemplate</emphasis><emphasis
        role="bold">"</emphasis>]</term>

        <listitem>
          <para>The value of this variable generate the --log-prefix setting
          for Shorewall logging rules. It contains a “printf” formatting
          template which accepts three arguments (the chain name, logging rule
          number (optional) and the disposition). To use LOGFORMAT with
          fireparse, set it as:</para>

          <programlisting>    LOGFORMAT="fp=%s:%d a=%s "</programlisting>

          <para>If the LOGFORMAT value contains the substring “%d” then the
          logging rule number is calculated and formatted in that position; if
          that substring is not included then the rule number is not included.
          If not supplied or supplied as empty (LOGFORMAT="") then
          “Shorewall:%s:%s:” is assumed.</para>

          <note>
            <para>The setting of LOGFORMAT has an effect of the permitted
            length of zone names. See <ulink
            url="shorewall-zones.html">shorewall-zones</ulink> (5).</para>
          </note>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOGLIMIT=[</emphasis>[{<emphasis>s</emphasis>|<emphasis
        role="bold">d</emphasis>}:]<emphasis>rate</emphasis><emphasis
        role="bold">/</emphasis>{<emphasis
        role="bold">sec</emphasis>|<emphasis
        role="bold">min</emphasis>|<emphasis
        role="bold">hour</emphasis>|<emphasis
        role="bold">day</emphasis>}[:<emphasis>burst</emphasis>]]</term>

        <listitem>
          <para>Added in Shorewall 4.4.12. Limits the logging rate, either
          overall, or by source or destination IP address.</para>

          <para>If the value starts with 's:' then logging is limited per
          source IP. If the value starts with 'd:', then logging is limited
          per destination IP. Otherwise, the overall logging rate is
          limited.</para>

          <para>If <replaceable>burst</replaceable> is not specified, then a
          value of 5 is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOGBURST=</emphasis>[<emphasis>burst</emphasis>]</term>

        <listitem>
          <para>Deprecated in Shorewall 4.4.12.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">LOGRATE=</emphasis>[<emphasis>rate</emphasis>/{<emphasis
        role="bold">minute</emphasis>|<emphasis
        role="bold">second</emphasis>}]</term>

        <listitem>
          <para>Deprecated in Shorewall 4.4.12. These options are ignored when
          LOGLIMIT is specified.</para>

          <para>These parameters set the match rate and initial burst size for
          logged packets. Please see iptables(8) for a description of the
          behavior of these parameters (the iptables option --limit is set by
          LOGRATE and --limit-burst is set by LOGBURST). If both parameters
          are set empty, no rate-limiting will occur. If you supply one of
          these, then you should also supply the other.</para>

          <para>Example:</para>

          <programlisting>    LOGRATE=10/minute
    LOGBURST=5</programlisting>

          <para>For each logging rule, the first time the rule is reached, the
          packet will be logged; in fact, since the burst is 5, the first five
          packets will be logged. After this, it will be 6 seconds (1 minute
          divided by the rate of 10) before a message will be logged from the
          rule, regardless of how many packets reach it. Also, every 6
          seconds, one of the bursts will be regained; if no packets hit the
          rule for 30 seconds, the burst will be fully recharged; back where
          we started.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">LOGTAGONLY=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Using the default LOGFORMAT, chain names may not exceed 11
          characters or truncation of the log prefix may occur. Longer chain
          names may be used with log tags if you set LOGTAGONLY=Yes. With
          LOGTAGONLY=Yes, if a log tag is specified then the tag is included
          in the log prefix in place of the chain name.</para>

          <para>Beginning with Shorewall 4.5.12, when LOGTAGONLY=Yes, you have
          more control over the generated log prefix. Beginning with that
          release, the tag is interpreted as a <replaceable>chain
          name</replaceable> and a <replaceable>disposition</replaceable>
          separated by a comma. So this rule:</para>

          <programlisting>#ACTION                                SOURCE         DEST
LOG:info:foo,bar                 net                   fw</programlisting>

          <para>would generate the following log prefix when using the default
          LOGFORMAT setting:</para>

          <simplelist>
            <member>Shorewall:foo:bar:</member>
          </simplelist>

          <para>Similarly,</para>

          <programlisting>#ACTION                               SOURCE            DEST
LOG:info:,bar                        net                    fw</programlisting>

          <para>would generate</para>

          <simplelist>
            <member>Shorewall:net2fw:bar:</member>
          </simplelist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MACLIST_DISPOSITION=</emphasis>[<emphasis
        role="bold">ACCEPT</emphasis>|<emphasis
        role="bold">DROP</emphasis>|<emphasis
        role="bold">REJECT</emphasis>|A_DROP|A_REJECT]</term>

        <listitem>
          <para>Determines the disposition of connections requests that fail
          MAC Verification and must have the value ACCEPT (accept the
          connection request anyway), REJECT (reject the connection request)
          or DROP (ignore the connection request). If not set or if set to the
          empty value (e.g., MACLIST_DISPOSITION="") then
          MACLIST_DISPOSITION=REJECT is assumed.</para>

          <para>A_DROP and A_REJECT are audited versions of DROP and REJECT
          respectively and were added in Shorewall 4.4.20. They require
          AUDIT_TARGET in the kernel and iptables.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">MACLIST_LOG_LEVEL=</emphasis>[<emphasis>log-level</emphasis>]</term>

        <listitem>
          <para>Determines the syslog level for logging connection requests
          that fail MAC Verification. The value must be a valid syslogd log
          level. If you don't want to log these connection requests, set to
          the empty value (e.g., MACLIST_LOG_LEVEL="").</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MACLIST_TABLE=</emphasis>[<emphasis
        role="bold">filter</emphasis>|<emphasis
        role="bold">mangle</emphasis>]</term>

        <listitem>
          <para>Normally, MAC verification occurs in the filter table (INPUT
          and FORWARD) chains. When forwarding a packet from an interface with
          MAC verification to a bridge interface, that doesn't work.</para>

          <para>This problem can be worked around by setting
          MACLIST_TABLE=mangle which will cause Mac verification to occur out
          of the PREROUTING chain. Because REJECT isn't available in that
          environment, you may not specify MACLIST_DISPOSITION=REJECT or
          MACLIST_DISPOSITION=A_REJECT with MACLIST_TABLE=mangle.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">MACLIST_TTL=[</emphasis><emphasis>number</emphasis>]</term>

        <listitem>
          <para>The performance of configurations with a large numbers of
          entries in <ulink
          url="shorewall-maclist.html">shorewall-maclist</ulink>(5) can be
          improved by setting the MACLIST_TTL variable in <ulink
          url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>

          <para>If your iptables and kernel support the "Recent Match" (see
          the output of "shorewall check" near the top), you can cache the
          results of a 'maclist' file lookup and thus reduce the overhead
          associated with MAC Verification.</para>

          <para>When a new connection arrives from a 'maclist' interface, the
          packet passes through then list of entries for that interface in
          <ulink url="shorewall-maclist.html">shorewall-maclist</ulink>(5). If
          there is a match then the source IP address is added to the 'Recent'
          set for that interface. Subsequent connection attempts from that IP
          address occurring within $MACLIST_TTL seconds will be accepted
          without having to scan all of the entries. After $MACLIST_TTL from
          the first accepted connection request from an IP address, the next
          connection request from that IP address will be checked against the
          entire list.</para>

          <para>If MACLIST_TTL is not specified or is specified as empty (e.g,
          MACLIST_TTL="" or is specified as zero then 'maclist' lookups will
          not be cached).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MANGLE_ENABLED=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Determines whether Shorewall will generate rules in the
          Netfilter mangle table. Setting MANGLE_ENABLED=No disables all
          Shorewall features that require the mangle table. The default is
          MANGLE_ENABLED=Yes.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MAPOLDACTIONS=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>This option is included for compatibility with old Shorewall
          configuration. New installs should always have
          MAPOLDACTIONS=No.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">MARK_IN_FORWARD_CHAIN=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>If your kernel has a FORWARD chain in the mangle table, you
          may set MARK_IN_FORWARD_CHAIN=Yes to cause the marking specified in
          the tcrules file to occur in that chain rather than in the
          PREROUTING chain. This permits you to mark inbound traffic based on
          its destination address when DNAT is in use. To determine if your
          kernel has a FORWARD chain in the mangle table, use the <emphasis
          role="bold">/sbin/shorewall show mangle</emphasis> command; if a
          FORWARD chain is displayed then your kernel will support this
          option. If this option is not specified or if it is given the empty
          value (e.g., MARK_IN_FORWARD_CHAIN="") then MARK_IN_FORWARD_CHAIN=No
          is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry id="MASK_BITS">
        <term><emphasis
        role="bold">MASK_BITS</emphasis>=[<replaceable>number</replaceable>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Number of bits on the right of the
          32-bit packet mark to be masked when clearing the traffic shaping
          mark. Must be &gt;= TC_BITS and &lt;= PROVIDER_OFFSET (if
          PROVIDER_OFFSET &gt; 0). Default value and the default values of the
          other mark layout options is determined as follows:</para>

          <table frame="none">
            <title>Default Packet Mark Layout</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry>WIDE_TC_MARKS=No, HIGH_ROUTE_MARKS=No</entry>

                  <entry>TC_BITS=8, PROVIDER_BITS=8, PROVIDER_OFFSET=0,
                  MASK_BITS=8</entry>
                </row>

                <row>
                  <entry>WIDE_TC_MARKS=No, HIGH_ROUTE_MARKS=Yes</entry>

                  <entry>TC_BITS=8, PROVIDER_BITS=8, PROVIDER_OFFSET=8,
                  MASK_BITS=8</entry>
                </row>

                <row>
                  <entry>WIDE_TC_MARKS=Yes, HIGH_ROUTE_MARKS=No</entry>

                  <entry>TC_BITS=14, PROVIDER_BITS=8, PROVIDER_OFFSET=0,
                  MASK_BITS=16</entry>
                </row>

                <row>
                  <entry>WIDE_TC_MARKS=Yes, HIGH_ROUTE_MARKS=Yes</entry>

                  <entry>TC_BITS=14, PROVIDER_BITS=8, PROVIDER_OFFSET=16,
                  MASK_BITS=16</entry>
                </row>
              </tbody>
            </tgroup>
          </table>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MODULE_SUFFIX=</emphasis>[<emphasis
        role="bold">"</emphasis><emphasis>extension</emphasis> ...<emphasis
        role="bold">"</emphasis>]</term>

        <listitem>
          <para>The value of this option determines the possible file
          extensions of kernel modules. The default value is "ko ko.gz o o.gz
          gz".</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">MODULESDIR=</emphasis>[<emphasis>pathname</emphasis>[<emphasis
        role="bold">:</emphasis><emphasis>pathname</emphasis>]...]</term>

        <listitem>
          <para>This parameter specifies the directory/directories where your
          kernel netfilter modules may be found. If you leave the variable
          empty, Shorewall will supply the value "/lib/modules/`uname
          -r`/kernel/net/ipv4/netfilter" in versions of Shorewall prior to
          3.2.4 and "/lib/modules/`uname
          -r`/kernel/net/ipv4/netfilter:/lib/modules/`uname
          -r`/kernel/net/ipv4/netfilter" in later versions.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MULTICAST=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>This option will normally be set to 'No' (the default). It
          should be set to 'Yes' under the following circumstances:</para>

          <orderedlist>
            <listitem>
              <para>You have an interface that has parallel zones defined via
              /etc/shorewall/hosts.</para>
            </listitem>

            <listitem>
              <para>You want to forward multicast packets to two or more of
              those parallel zones.</para>
            </listitem>
          </orderedlist>

          <para>In such cases, you will configure a <option>destonly</option>
          network on each zone receiving multicasts.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">MUTEX_TIMEOUT=</emphasis>[<emphasis>seconds</emphasis>]</term>

        <listitem>
          <para>The value of this variable determines the number of seconds
          that programs will wait for exclusive access to the Shorewall lock
          file. After the number of seconds corresponding to the value of this
          variable, programs will assume that the last program to hold the
          lock died without releasing the lock.</para>

          <para>If not set or set to the empty value, a value of 60 (60
          seconds) is assumed.</para>

          <para>An appropriate value for this parameter would be twice the
          length of time that it takes your firewall system to process a
          <emphasis role="bold">shorewall restart</emphasis> command.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">NFACCT=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.7. Specifies the pathname of the nfacct
          utility. If not specified, Shorewall will use the PATH setting to
          find the program.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">NULL_ROUTE_RFC1918=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis
        role="bold">No</emphasis>|<emphasis
        role="bold">blackhole</emphasis>|<emphasis
        role="bold">unreachable</emphasis>|<emphasis
        role="bold">prohibit</emphasis>]</term>

        <listitem>
          <para>When set to Yes, causes Shorewall to null-route the IPv4
          address ranges reserved by RFC1918. The default value is
          'No'.</para>

          <para>When combined with route filtering (ROUTE_FILTER=Yes or
          <option>routefilter</option> in <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)),
          this option ensures that packets with an RFC1918 source address are
          only accepted from interfaces having known routes to networks using
          such addresses.</para>

          <para>Beginning with Shorewall 4.5.15, you may specify
          <option>blackhole</option>, <option>unreachable</option> or
          <option>prohibit</option> to set the type of route to be created.
          See <ulink
          url="http://www.shorewall.net/MultiISP.html#null_routing">http://www.shorewall.net/MultiISP.html#null_routing</ulink>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">OPTIMIZE=</emphasis>[<replaceable>value</replaceable>]</term>

        <listitem>
          <para>The specified <replaceable>value</replaceable> enables certain
          optimizations. Each optimization category is associated with a power
          of two. To enable multiple optimization categories, simply add their
          corresponding numbers together.</para>

          <para>Beginning with Shorewall 4.5.20, you may specify OPTIMIZE=All
          to enable all optimization categories, and you may also specify
          OPTIMIZE=None to disable optimization.</para>

          <itemizedlist>
            <listitem>
              <para>Optimization category 1 - Traditionally, Shorewall has
              created rules for <ulink
              url="../ScalabilityAndPerformance.html">the complete matrix of
              host groups defined by the zones, interfaces and hosts
              files</ulink>. Any traffic that didn't correspond to an element
              of that matrix was rejected in one of the built-in chains. When
              the matrix is sparse, this results in lots of largely useless
              rules.</para>

              <para>These extra rules can be eliminated by setting the 1 bit
              in OPTIMIZE.</para>

              <para>The 1 bit setting also controls the suppression of
              redundant wildcard rules (those specifying "all" in the SOURCE
              or DEST column). A wildcard rule is considered to be redundant
              when it has the same ACTION and Log Level as the applicable
              policy.</para>

              <note>
                <para>Optimization level 1 is ignored when optimization level
                4 is also selected, since level 4 performs similar
                optimizations in a more robust way.</para>
              </note>
            </listitem>

            <listitem>
              <para>Optimization category 2 - Added in Shorewall 4.4.7. When
              set, suppresses superfluous ACCEPT rules in a policy chain that
              implements an ACCEPT policy. Any ACCEPT rules that immediately
              precede the final blanket ACCEPT rule in the chain are now
              omitted.</para>
            </listitem>

            <listitem>
              <para>Optimization category 4 - Added in Shorewall 4.4.7. When
              set, causes short chains (those with less than 2 rules) to be
              optimized away. The following chains are excluded from
              optimization:</para>

              <itemizedlist>
                <listitem>
                  <para>accounting chains (unless
                  OPTIMIZE_ACCOUNTING=Yes)</para>
                </listitem>

                <listitem>
                  <para>action chains (user-defined)</para>
                </listitem>

                <listitem>
                  <para>'blacklst' chain</para>
                </listitem>

                <listitem>
                  <para>dynamic</para>
                </listitem>

                <listitem>
                  <para>forwardUPnP</para>
                </listitem>

                <listitem>
                  <para>UPnP (nat table)</para>
                </listitem>
              </itemizedlist>

              <para>Additionally:</para>

              <itemizedlist>
                <listitem>
                  <para>If a built-in chain has a single rule that branches to
                  a second chain, then the rules from the second chain are
                  moved to the built-in chain and the target chain is
                  omitted.</para>
                </listitem>

                <listitem>
                  <para>Chains with no references are deleted.</para>
                </listitem>

                <listitem>
                  <para>Accounting chains are subject to optimization if the
                  OPTIMIZE_ACCOUNTING option is set to 'Yes'.</para>
                </listitem>

                <listitem>
                  <para>If a chain ends with an unconditional branch to a
                  second chain (other than to 'reject'), then the branch is
                  deleted from the first chain and the rules from the second
                  chain are appended to it.</para>
                </listitem>
              </itemizedlist>

              <para>An additional optimization was added in Shorewall 4.5.4.
              If the last rule in a chain is an unqualified jump to a simple
              target, then all immediately preceding rules with the same
              simple target are omitted.</para>

              <para>For example, consider this chain:</para>

              <programlisting>	-A fw-net -p udp --dport 67:68 -j ACCEPT
	-A fw-net -p udp --sport 1194 -j ACCEPT
	-A fw-net -p 41 -j ACCEPT
	-A fw-net -j ACCEPT
</programlisting>

              <para>Since all of the rules are jumps to the simple target
              ACCEPT, this chain is totally optimized away and jumps to the
              chain are replace with jumps to ACCEPT.</para>
            </listitem>

            <listitem>
              <para>Optimization category 8 - Added in Shorewall 4.4.9. When
              set, causes chains with identical rules to be collapsed into a
              single chain.</para>
            </listitem>

            <listitem>
              <para>Optimization category 16 - Added in Shorewall 4.4.26. When
              set, causes sequences of <firstterm>compatible</firstterm> rules
              to be combined into a single rule. Rules are considered
              compatible if they differ only in their destination ports and
              comments.</para>

              <para>A sequence of compatible rules is often generated when
              macros are invoked in sequence.</para>

              <para>The ability to combine adjacent rules is limited by two
              factors:</para>

              <itemizedlist>
                <listitem>
                  <para>Destination port lists may only be combined up to a
                  maximum of 15 ports, where a port-pair counts as two
                  ports.</para>
                </listitem>

                <listitem>
                  <para>Rules may only be combined until the length of their
                  concatenated comment reaches 255 characters.</para>
                </listitem>
              </itemizedlist>

              <para>When either of these limits would be exceeded, the current
              combined rule is emitted and the compiler attempts to combine
              rules beginning with the one that would have exceeded the limit.
              Adjacent combined comments are separated by ', '. Empty comments
              at the front of a group of combined comments are replaced by
              'Others and'. Empty comments at the end of a group of combined
              comments are replaced by 'and others'.</para>

              <para>Beginning in Shorewall 4.5.10, this option also suppresses
              duplicate adjacent rules and duplicate non-adjacent rules that
              don't include <emphasis role="bold">mark</emphasis>, <emphasis
              role="bold">connmark</emphasis>, <emphasis
              role="bold">dscp</emphasis>, <emphasis
              role="bold">ecn</emphasis>, <emphasis
              role="bold">set</emphasis>, <emphasis role="bold">tos</emphasis>
              or <emphasis role="bold">u32</emphasis> matches.</para>

              <variablelist>
                <varlistentry>
                  <term>Example 1:</term>

                  <listitem>
                    <para>Rules with comments "FOO", &lt;empty&gt; and "BAR"
                    would result in the combined comment "FOO and others,
                    BAR".</para>
                  </listitem>
                </varlistentry>

                <varlistentry>
                  <term>Example 2:</term>

                  <listitem>
                    <para>Rules with comments &lt;empty&gt;, "FOO" and "BAR"
                    would result in the combined comment "Others and FOO,
                    BAR". Note: Optimize level 16 requires "Extended
                    Multi-port Match" in your iptables and kernel.</para>
                  </listitem>
                </varlistentry>
              </variablelist>
            </listitem>
          </itemizedlist>

          <para>The default value is zero which disables all
          optimizations.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">OPTIMIZE_ACCOUNTING=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.7. If set to Yes, Shorewall accounting
          changes are subject to optimization (OPTIMIZE=4,5,6 or 7). If not
          specified or set to the empty value, OPTIMIZE_ACCOUNTING=No is
          assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">PATH=</emphasis><emphasis>pathname</emphasis>[<emphasis
        role="bold">:</emphasis><emphasis>pathname</emphasis>]...</term>

        <listitem>
          <para>Determines the order in which Shorewall searches directories
          for executable files.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">PERL=</emphasis><emphasis>pathname</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.11 RC1. Specifies the path name of the
          Perl executable. Default is <filename>/usr/bin/perl</filename>. If
          the pathname specified by this option does not exist or the named
          file is not executable, then Shorewall falls back to
          <filename>/usr/bin/perl/</filename></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">PROVIDER_BITS</emphasis>=[<replaceable>number</replaceable>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.26. The number of bits in the 32-bit
          packet mark to be used for provider numbers. May be zero. See <link
          linkend="MASK_BITS">MASK_BITS</link> above for default value.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">PROVIDER_OFFSET</emphasis>=[<replaceable>number</replaceable>]If</term>

        <listitem>
          <para>Added in Shorewall 4.4.26. The offset from the right
          (low-order end) of the provider number field in the 32-bit packet
          mark. If non-zero, must be &gt;= TC_BITS (Shorewall automatically
          adjusts PROVIDER_OFFSET's value). PROVIDER_OFFSET + PROVIDER_BITS +
          ZONE_BITS must be &lt; 32. See <link
          linkend="MASK_BITS">MASK_BITS</link> above for default value.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RCP_COMMAND="</emphasis><replaceable>command</replaceable><emphasis
        role="bold">"</emphasis></term>

        <listitem>
          <para></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RSH_COMMAND="</emphasis><replaceable>command</replaceable><emphasis
        role="bold">"</emphasis></term>

        <listitem>
          <para>Earlier generations of Shorewall Lite required that remote
          root login via ssh be enabled in order to use the
          <command>load</command> and <command>reload</command> commands.
          Beginning with release 3.9.5, you may define an alternative means
          for accessing the remote firewall system. In that release, two new
          options were added to shorewall.conf:<simplelist>
              <member>RSH_COMMAND</member>

              <member>RCP_COMMAND</member>
            </simplelist>The default values for these are as
          follows:<simplelist>
              <member>RSH_COMMAND: ssh ${root}@${system} ${command}</member>

              <member>RCP_COMMAND: scp ${files}
              ${root}@${system}:${destination}</member>
            </simplelist>Shell variables that will be set when the commands
          are invoked are as follows:<simplelist>
              <member><replaceable>root</replaceable> - root user. Normally
              <option>root</option> but may be overridden using the '-r'
              option.</member>

              <member><replaceable>system</replaceable> - The name/IP address
              of the remote firewall system.</member>

              <member><replaceable>command</replaceable> - For RSH_COMMAND,
              the command to be executed on the firewall system.</member>

              <member><replaceable>files</replaceable> - For RCP_COMMAND, a
              space-separated list of files to be copied to the remote
              firewall system.</member>

              <member><replaceable>destination</replaceable> - The directory
              on the remote system that the files are to be copied
              into.</member>
            </simplelist></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RELATED_DISPOSITION=[ACCEPT|A_ACCEPT|A_DROP|A_REJECT|DROP|REJECT|CONTINUE]</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.27. Shorewall has traditionally
          ACCEPTed RELATED packets that don't match any rule in the RELATED
          section of <ulink url="shorewall-rules.html">shorewall-rules</ulink>
          (5). Concern about the safety of this practice resulted in the
          addition of this option. When a packet in RELATED state fails to
          match any rule in the RELATED section, the packet is disposed of
          based on this setting. The default value is ACCEPT for compatibility
          with earlier versions.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RELATED_LOG_LEVEL=</emphasis><emphasis>log-level</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.27. Packets in the related state that
          do not match any rule in the RELATED section of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink> (5) are logged at
          this level. The default value is empty which means no logging is
          performed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">REJECT_ACTION=</emphasis><emphasis>action</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.5.21. When a REJECT target is specified,
          Shorewall normally handles the response as follows:</para>

          <itemizedlist>
            <listitem>
              <para>If the destination address of the packet is a broadcast or
              multicast address, the packet is dropped.</para>
            </listitem>

            <listitem>
              <para>if the protocol is ICMP (2) then the packet is
              dropped.</para>
            </listitem>

            <listitem>
              <para>if the protocol is TCP (6) then the packet is rejected
              with an RST.</para>
            </listitem>

            <listitem>
              <para>if the protocol is UDP (17) then the packet is rejected
              with an 'port-unreachable' ICMP (ICMP6).</para>
            </listitem>

            <listitem>
              <para>if the protocol is ICMP (1) then the packet is rejected
              with a 'host-unreachable' ICMP.</para>
            </listitem>

            <listitem>
              <para>otherwise, the packet is rejected with a 'host-prohibited'
              ICMP.</para>
            </listitem>
          </itemizedlist>

          <para>You can modify this behavior by implementing your own
          <replaceable>action</replaceable> that handles REJECT and specifying
          it's name in this option. The <emphasis role="bold">nolog</emphasis>
          and <emphasis role="bold">inline</emphasis> options will
          automatically be assumed for the specified
          <replaceable>action</replaceable>.</para>

          <para>The following action implements the standard behavior:</para>

          <programlisting>?format 2
#TARGET         SOURCE  DEST    PROTO
Broadcast(DROP) -       -       -
DROP            -       -       2
INLINE          -       -       6       ; -j REJECT --reject-with tcp-reset
?if __ENHANCED_REJECT
INLINE          -       -       17      ; -j REJECT
?if __IPV4
INLINE          -       -       1       ; -j REJECT --reject-with icmp-host-unreachable
INLINE          -       -       -       ; -j REJECT --reject-with icmp-host-prohibited
?else
INLINE          -       -       58      ; -j REJECT --reject-with icmp6-addr-unreachable
INLINE          -       -       -       ; -j REJECT --reject-with icmp6-adm-prohibited
?endif
?else
INLINE          -       -       -       ; -j REJECT
?endif</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">REQUIRE_INTERFACE=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.10. The default is No. If set to Yes,
          at least one optional interface must be up in order for the firewall
          to be in the started state. Intended to be used with the <ulink
          url="shorewall-init.html">Shorewall Init Package</ulink>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RESTORE_DEFAULT_ROUTE=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>This option determines whether to restore the default route
          saved when here are 'balance' providers defined but all of them are
          down.</para>

          <para>The default is RESTORE_DEFAULT_ROUTE=Yes which preserves the
          pre-4.2.6 behavior.</para>

          <para>RESTORE_DEFAULT_ROUTE=No is appropriate when you don't want a
          default route in the main table (USE_DEFAULT_RT=No) or in the
          default table (USE_DEFAULT_RT=Yes) when there are no balance
          providers available. In that case, RESTORE_DEFAULT_ROUTE=No will
          cause any default route in the relevant table to be deleted.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">RESTORE_ROUTEMARKS=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.9. When set to <emphasis
          role="bold">Yes</emphasis> (the default), provider marks are
          restored unconditionally at the top of the mangle OUTPUT and
          PREROUTING chains, even if the saved mark is zero. When this option
          is set to <emphasis role="bold">No</emphasis>, the mark is restored
          even when it is zero. If you have problems with IPSEC ESP packets
          not being routed correctly on output, try setting this option to
          <emphasis role="bold">No</emphasis>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RESTOREFILE=</emphasis><emphasis>filename</emphasis></term>

        <listitem>
          <para>Specifies the simple name of a file in /var/lib/shorewall to
          be used as the default restore script in the <emphasis
          role="bold">shorewall save</emphasis>, <emphasis
          role="bold">shorewall restore</emphasis>, <emphasis
          role="bold">shorewall forget </emphasis>and <emphasis
          role="bold">shorewall -f start</emphasis> commands.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">RETAIN_ALIASES=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>During <emphasis role="bold">shorewall star</emphasis>t, IP
          addresses to be added as a consequence of ADD_IP_ALIASES=Yes and
          ADD_SNAT_ALIASES=Yes are quietly deleted when <ulink
          url="shorewall-nat.html">shorewall-nat</ulink>(5) and <ulink
          url="shorewall-masq.html">shorewall-masq</ulink>(5) are processed
          then are re-added later. This is done to help ensure that the
          addresses can be added with the specified labels but can have the
          undesirable side effect of causing routes to be quietly deleted.
          When RETAIN_ALIASES is set to Yes, existing addresses will not be
          deleted. Regardless of the setting of RETAIN_ALIASES, addresses
          added during <emphasis role="bold">shorewall start</emphasis> are
          still deleted at a subsequent <emphasis role="bold">shorewall
          stop</emphasis> or <emphasis role="bold">shorewall
          restart</emphasis>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ROUTE_FILTER=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis
        role="bold">No</emphasis>|Keep]</term>

        <listitem>
          <para>If this parameter is given the value <emphasis
          role="bold">Yes</emphasis> or <emphasis role="bold">yes</emphasis>
          then route filtering (anti-spoofing) is enabled on all network
          interfaces which are brought up while Shorewall is in the started
          state. The default value is <emphasis
          role="bold">no</emphasis>.</para>

          <para>The value <emphasis role="bold">Keep</emphasis> causes
          Shorewall to ignore the option. If the option is set to <emphasis
          role="bold">Yes</emphasis>, then route filtering occurs on all
          interfaces. If the option is set to <emphasis
          role="bold">No</emphasis>, then route filtering is disabled on all
          interfaces except those specified in <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5).</para>

          <important>
            <para>If you need to disable route filtering on any interface,
            then you must set ROUTE_FILTER=No then set routefilter=1 or
            routefilter=2 on those interfaces where you want route filtering.
            See <ulink
            url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
            for additional details.</para>
          </important>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">RPFILTER_DISPOSITION=</emphasis>[<emphasis
        role="bold">DROP</emphasis>|<emphasis
        role="bold">REJECT</emphasis>|A_DROP|A_REJECT]</term>

        <listitem>
          <para>Added in Shorewall 4.5.7. Determines the disposition of
          packets entering from interfaces the <option>rpfilter</option>
          option (see <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)).
          Packets disposed of by this option are those whose response packets
          would not be sent through the same interface receiving the
          packet.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">RPFILTER_LOG_LEVEL=</emphasis><emphasis>log-level</emphasis></term>

        <listitem>
          <para>Added in shorewall 4.5.7. Determines the logging of packets
          disposed via the RPFILTER_DISPOSITION. The default value is
          <option>info</option>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SAVE_ARPTABLES=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.5.12. If SAVE_ARPTABLES=Yes, then the
          current arptables contents will be saved by <emphasis
          role="bold">shorewall save</emphasis> command and restored by
          <emphasis role="bold">shorewall restore</emphasis> command. Default
          value is No.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SAVE_IPSETS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Re-enabled in Shorewall 4.4.6. If SAVE_IPSETS=Yes, then the
          current contents of your ipsets will be saved by the <emphasis
          role="bold">shorewall stop</emphasis> and <emphasis
          role="bold">shorewall save</emphasis> commands and restored by the
          <emphasis role="bold">shorewall start</emphasis> and <emphasis
          role="bold">shorewall restore</emphasis> commands.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SFILTER_DISPOSITION=</emphasis>[<emphasis
        role="bold">DROP</emphasis>|<emphasis
        role="bold">REJECT</emphasis>|A_DROP|A_REJECT]</term>

        <listitem>
          <para>Added in Shorewall 4.4.20. Determines the disposition of
          packets matching the <option>sfilter</option> option (see <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)) and
          of <firstterm>hairpin</firstterm> packets on interfaces without the
          <option>routeback</option> option.<footnote>
              <para>Hairpin packets are packets that are routed out of the
              same interface that they arrived on.</para>
            </footnote> interfaces without the routeback option.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">SFILTER_LOG_LEVEL=</emphasis><emphasis>log-level</emphasis></term>

        <listitem>
          <para>Added on Shorewall 4.4.20. Determines the logging of packets
          matching the <option>sfilter</option> option (see <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)) and
          of <firstterm>hairpin</firstterm> packets on interfaces without the
          <option>routeback</option> option.<footnote>
              <para>Hairpin packets are packets that are routed out of the
              same interface that they arrived on.</para>
            </footnote> interfaces without the routeback option. The default
          is <option>info</option>. If you don't wish for these packets to be
          logged, use SFILTER_LOG_LEVEL=none.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">SHOREWALL_SHELL=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>This option is used to specify the shell program to be used to
          run the Shorewall compiler and to interpret the compiled script. If
          not specified or specified as a null value, /bin/sh is assumed.
          Using a light-weight shell such as ash or dash can significantly
          improve performance.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">SMURF_DISPOSITION=</emphasis>[<emphasis
        role="bold">DROP</emphasis>|A_DROP]</term>

        <listitem>
          <para>Added in Shorewall 4.4.20. The default setting is DROP which
          causes smurf packets (see the nosmurfs option in <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)) to
          be dropped. A_DROP causes the packets to be audited prior to being
          dropped and requires AUDIT_TARGET support in the kernel and
          iptables.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">SMURF_LOG_LEVEL=</emphasis>[<emphasis>log-level</emphasis>]</term>

        <listitem>
          <para>Specifies the logging level for smurf packets (see the
          nosmurfs option in <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)). If
          set to the empty value ( SMURF_LOG_LEVEL="" ) then smurfs are not
          logged.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">STARTUP_ENABLED=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Determines if Shorewall is allowed to start. As released from
          shorewall.net, this option is set to <emphasis
          role="bold">No</emphasis>. When set to <emphasis
          role="bold">Yes</emphasis> or <emphasis role="bold">yes</emphasis>,
          Shorewall may be started. Used as a guard against Shorewall being
          accidentally started before it has been configured.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">STARTUP_LOG=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>If specified, determines where Shorewall will log the details
          of each <emphasis role="bold">start</emphasis>, <emphasis
          role="bold">restart</emphasis> and <emphasis
          role="bold">refresh</emphasis> command. Logging verbosity is
          determined by the setting of LOG_VERBOSITY above.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">SUBSYSLOCK=</emphasis>[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>This parameter should be set to the name of a file that the
          firewall should create if it starts successfully and remove when it
          stops. Creating and removing this file allows Shorewall to work with
          your distribution's initscripts. For RedHat and OpenSuSE, this
          should be set to /var/lock/subsys/shorewall. For Debian, the value
          is /var/lock/shorewall and in LEAF it is /var/run/shorewall.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">TC</emphasis>=[<emphasis>pathname</emphasis>]</term>

        <listitem>
          <para>If specified, gives the pathname of the 'tc' executable. If
          not specified, 'tc' is assumed and the utility will be located using
          the current PATH setting.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">TC_BITS</emphasis>=[<replaceable>number</replaceable>]</term>

        <listitem>
          <para>The number of bits at the low end of the 32-bit packet mark to
          be used for traffic shaping marking. May be zero. See <link
          linkend="MASK_BITS">MASK_BITS</link> above for default value.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">TC_ENABLED=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis
        role="bold">No</emphasis>|<emphasis
        role="bold">Internal</emphasis>|<emphasis
        role="bold">Simple</emphasis>|Shared]</term>

        <listitem>
          <para>If you say <emphasis role="bold">Yes</emphasis> or <emphasis
          role="bold">yes</emphasis> here, Shorewall will use a script that
          you supply to configure traffic shaping. The script must be named
          'tcstart' and must be placed in a directory on your
          CONFIG_PATH.</para>

          <para>If you say <emphasis role="bold">No</emphasis> or <emphasis
          role="bold">no</emphasis> then traffic shaping is not
          enabled.</para>

          <para>If you set TC_ENABLED=Simple (Shorewall 4.4.6 and later),
          simple traffic shaping using <ulink
          url="shorewall-tcinterfaces.html">shorewall-tcinterfaces</ulink>(5)
          and <ulink url="shorewall-tcpri.html">shorewall-tcpri</ulink>(5) is
          enabled.</para>

          <para>If you set TC_ENABLED=Internal or internal or leave the option
          empty then Shorewall will use its builtin traffic shaper
          (tc4shorewall written by Arne Bernin.</para>

          <para>Beginning with Shorewall 4.4.15, you can set
          TC_ENABLED=Shared. This allows you to configure the tcdevices and
          tcclasses in your Shorewall6 configuration yet make them available
          to the compiler when compiling your Shorewall configuration. In
          addition to setting TC_ENABLED=Shared, you need to create symbolic
          links from your Shorewall configuration directory (normally
          /etc/shorewall/) to the tcdevices and tcclasses files in your
          Shorewall6 configuration directory (normally
          /etc/shorewall6/).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">TC_EXPERT=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Normally, Shorewall tries to protect users from themselves by
          preventing PREROUTING and OUTPUT tcrules from being applied to
          packets that have been marked by the 'track' option in <ulink
          url="shorewall-providers.html">shorewall-providers</ulink>(5).</para>

          <para>If you know what you are doing, you can set TC_EXPERT=Yes and
          Shorewall will not include these cautionary checks.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">TC_PRIOMAP</emphasis>=<emphasis>map</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.6. Determines the mapping of a packet's
          TOS field to priority bands. See <ulink
          url="shorewall-tcpri.html">shorewall-tcpri</ulink>(5). The
          <emphasis>map</emphasis> consists of 16 space-separated digits with
          values 1, 2 or 3. A value of 1 corresponds to Linux priority 0, 2 to
          Linux priority 1, and 3 to Linux Priority 2. The first entry gives
          the priority of TOS value 0, the second of TOS value 1, and so on.
          See tc-prio(8) for additional information.</para>

          <para>The default setting is TC_PRIOMAP="2 3 3 3 2 3 1 1 2 2 2 2 2 2
          2 2".</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">TCP_FLAGS_DISPOSITION=</emphasis>[<emphasis
        role="bold">ACCEPT</emphasis>|<emphasis
        role="bold">DROP</emphasis>|<emphasis
        role="bold">REJECT</emphasis>|A_DROP|A_REJECT]</term>

        <listitem>
          <para>Determines the disposition of TCP packets that fail the checks
          enabled by the <emphasis role="bold">tcpflags</emphasis> interface
          option (see <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)) and
          must have a value of ACCEPT (accept the packet), REJECT (send an RST
          response) or DROP (ignore the packet). If not set or if set to the
          empty value (e.g., TCP_FLAGS_DISPOSITION="") then
          TCP_FLAGS_DISPOSITION=DROP is assumed.</para>

          <para>A_DROP and A_REJECT are audited versions of DROP and REJECT
          respectively and were added in Shorewall 4.4.20. They require
          AUDIT_TARGET in the kernel and iptables.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">TCP_FLAGS_LOG_LEVEL=</emphasis>[<emphasis>log-level</emphasis>]</term>

        <listitem>
          <para>Determines the syslog level for logging packets that fail the
          checks enabled by the tcpflags interface option. The value must be a
          valid syslogd log level. If you don't want to log these packets, set
          to the empty value (e.g., TCP_FLAGS_LOG_LEVEL="").</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">TRACK_PROVIDERS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.4.3. When set to Yes, causes the
          <option>track</option> option to be assumed on all providers defined
          in <ulink
          url="shorewall-providers.html">shorewall-providers</ulink>(5). May
          be overridden on an individual provider through use of the
          <option>notrack</option> option. The default value is 'No'.</para>

          <para>Beginning in Shorewall 4.4.6, setting this option to 'Yes'
          also simplifies PREROUTING rules in <ulink
          url="shorewall-tcrules.html">shorewall-tcrules</ulink>(5).
          Previously, when TC_EXPERT=No, packets arriving through 'tracked'
          provider interfaces were unconditionally passed to the PREROUTING
          tcrules. This was done so that tcrules could reset the packet mark
          to zero, thus allowing the packet to be routed using the 'main'
          routing table. Using the main table allowed dynamic routes (such as
          those added for VPNs) to be effective. The rtrules file was created
          to provide a better alternative to clearing the packet mark. As a
          consequence, passing these packets to PREROUTING complicates things
          without providing any real benefit. Beginning with Shorewall 4.4.6,
          when TRACK_PROVIDERS=Yes and TC_EXPERT=No, packets arriving through
          'tracked' interfaces will not be passed to the PREROUTING rules.
          Since TRACK_PROVIDERS was just introduced in 4.4.3, this change
          should be transparent to most, if not all, users.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">TRACK_RULES=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Added in Shorewall 4.5.20. If set to <emphasis
          role="bold">Yes</emphasis>, causes the compiler to add a comment to
          iptables rules to indicate the file name and line number of the
          configuration entry that generated the rule. If set to <emphasis
          role="bold">No</emphasis> (the default), then no such comments are
          added.</para>

          <para>Setting this option to <emphasis role="bold">Yes</emphasis>
          requires the <firstterm>Comments</firstterm> capability in iptables
          and kernel.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">UNTRACKED_DISPOSITION=[ACCEPT|A_ACCEPT|A_DROP|A_REJECT|DROP|REJECT|CONTINUE]</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.5.13. Shorewall has traditionally passed
          UNTRACKED packets through the NEW section of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink> (5). When a
          packet in UNTRACKED state fails to match any rule in the UNTRACKED
          section, the packet is disposed of based on this setting. The
          default value is CONTINUE for compatibility with earlier
          versions.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">UNTRACKED_LOG_LEVEL=</emphasis><emphasis>log-level</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.5.13. Packets in the UNTRACKED state that
          do not match any rule in the UNTRACKED section of <ulink
          url="shorewall-rules.html">shorewall-rules</ulink> (5) are logged at
          this level. The default value is empty which means no logging is
          performed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">USE_DEFAULT_RT=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>When set to 'Yes', this option causes the Shorewall multi-ISP
          feature to create a different set of routing rules which are
          resilient to changes in the main routing table. Such changes can
          occur for a number of reasons, VPNs going up and down being an
          example. The idea is to send packets through the main table prior to
          applying any of the Shorewall-generated routing rules. So changes to
          the main table will affect the routing of packets by default.</para>

          <para>When USE_DEFAULT_RT=Yes:</para>

          <orderedlist>
            <listitem>
              <para>Both the DUPLICATE and the COPY columns in <ulink
              url="shorewall-providers.html">providers</ulink>(5) file must
              remain empty (or contain "-").</para>
            </listitem>

            <listitem>
              <para>The default route is added to the the 'default' table
              rather than to the main table.</para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">balance</emphasis> is assumed unless
              <emphasis role="bold">loose</emphasis> is specified.</para>
            </listitem>

            <listitem>
              <para>Packets are sent through the main routing table by a rule
              with priority 999. In <ulink
              url="shorewall-routing_rules.html">routing_rules</ulink>(5), the
              range 1-998 may be used for inserting rules that bypass the main
              table.</para>
            </listitem>

            <listitem>
              <para>All provider gateways must be specified explicitly in the
              GATEWAY column. <emphasis role="bold">detect</emphasis> may not
              be specified.<note>
                  <para><emphasis role="bold">detect</emphasis> may be
                  specified for interfaces whose configuration is managed by
                  dhcpcd. Shorewall will use dhcpcd's database to find the
                  interface's gateway.</para>
                </note></para>
            </listitem>

            <listitem>
              <para>You should disable all default route management outside of
              Shorewall. If a default route is added to the main table while
              Shorewall is started, then all policy routing will stop working
              (except for those routing rules in the priority range
              1-998).</para>
            </listitem>
          </orderedlist>

          <para>If USE_DEFAULT_RT is not set or if it is set to the empty
          string then USE_DEFAULT_RT=No is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">USE_PHYSICAL_NAMES=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.27. Normally, when Shorewall creates a
          Netfilter chain that relates to an interface, it uses the
          interface's logical name as the base of the chain name. For example,
          if the logical name for an interface is OAKLAND, then the input
          chain for traffic arriving on that interface would be 'OAKLAND_in'.
          If this option is set to Yes, then the physical name of the
          interface will be used the base of the chain name.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">USE_RT_NAMES=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.15. When set to 'Yes', Shorewall will
          use routing table (provider) names in the generated script rather
          than table numbers. When set to 'No' (the default), routing table
          numbers will be used.</para>

          <caution>
            <para>If you set USE_RT_NAMES=Yes and KEEP_RT_TABLES=Yes, then you
            must insure that all of your providers have entries in
            /etc/iproute2/rt_tables as well as the following entries:</para>

            <simplelist>
              <member>255 local</member>

              <member>254 main</member>

              <member>253 default</member>

              <member>250 balance</member>

              <member>0 unspec</member>
            </simplelist>

            <para>Without these entries, the firewall will fail to
            start.</para>
          </caution>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>

        <listitem>
          <para>Shorewall has traditionally been very noisy (produced lots of
          output). You may set the default level of verbosity using the
          VERBOSITY OPTION.</para>

          <para>Values are:</para>

          <simplelist>
            <member>0 - Silent. You may make it more verbose using the -v
            option</member>

            <member>1 - Major progress messages displayed</member>

            <member>2 - All progress messages displayed (pre Shorewall-3.2.0
            behavior)</member>
          </simplelist>

          <para>If not specified, then 2 is assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">WARNOLDCAPVERSION=</emphasis>[<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>

        <listitem>
          <para>Added in Shorewall 4.5.12. When set to <emphasis
          role="bold">Yes</emphasis> (the default), the compiler issues a
          warning when it finds a capabilities file that doesn't specify all
          of the capabilities supported by the compiler. When
          WARNOLDCAPVERSION is set to <emphasis role="bold">No</emphasis>, no
          warning is issued.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">WIDE_TC_MARKS=</emphasis>{<emphasis
        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>}</term>

        <listitem>
          <para>Deprecated in Shorewall 4.4.26 in favor of TC_BITS and
          MASK_BITS.</para>

          <para>When set to No (the default), traffic shaping marks are 8
          bytes wide (possible values are 1-255). When WIDE_TC_MARKS=Yes,
          traffic shaping marks are 14 bytes wide (values 1-16383). The
          setting of WIDE_TC_MARKS also has an effect on the HIGH_ROUTE_MARKS
          option (see above).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">ZONE_BITS</emphasis>=[<replaceable>number</replaceable>]</term>

        <listitem>
          <para>Added in Shorewall 4.4.26. When non-zero, enables automatic
          packet marking by source zone and determines the number of bits in
          the 32-bit packet mark to be used for the zone mark. Default value
          is 0.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis
        role="bold">ZONE2ZONE</emphasis>={<option>2</option>|<option>-</option>}</term>

        <listitem>
          <para>Added in Shorewall 4.4.4. This option determines how Shorewall
          constructs chain names involving zone names and/or 'all'. Beginning
          with Shorewall 4.6.0, the default is '-' (e.g., fw-net); prior to
          that release, the default was '2' (e.g., fw2net).</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/shorewall.conf</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcinterfaces(5),
    shorewall-tcpri(5), shorewall-tcrules(5), shorewall-tos(5),
    shorewall-tunnels(5), shorewall-zones(5)</para>
  </refsect1>
</refentry>