shorewall_code/docs/traffic_shaping.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Traffic Shaping/Control</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>

      <author>
        <firstname>Arne</firstname>

        <surname>Bernin</surname>
      </author>
    </authorgroup>

    <pubdate><?dbtimestamp format="Y/m/d"?></pubdate>

    <copyright>
      <year>2001-2008</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <copyright>
      <year>2005</year>

      <holder>Arne Bernin &amp; Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <important>
    <para>Traffic shaping is complex and the Shorewall community is not well
    equiped to answer traffic shaping questions. So if you are the type of
    person who needs "insert tab A into slot B" instructions for everything
    that you do, then please don't try to implement traffic shaping using
    Shorewall. You will just frustrate yourself and we won't be able to help
    you.</para>
  </important>

  <warning>
    <para>Said another way, reading just Shorewall documentation is not going
    to give you enough background to use this material.</para>

    <para>At a minimum, you will need to refer to at least the following
    additional information:</para>

    <itemizedlist>
      <listitem>
        <para>The LARTC HOWTO: <ulink
        url="http://www.lartc.org">http://www.lartc.org</ulink></para>
      </listitem>

      <listitem>
        <para>The HTB User's Guide: <ulink
        url="http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm">http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm</ulink></para>
      </listitem>

      <listitem>
        <para>Some of the documents listed at <ulink
        url="http://www.netfilter.org/documentation/index.html#documentation-howto">http://www.netfilter.org/documentation/index.html#documentation-howto</ulink>.
        The tutorial by Oskar Andreasson is particularly good.</para>
      </listitem>

      <listitem>
        <para>The output of <command>man iptables</command></para>
      </listitem>
    </itemizedlist>
  </warning>

  <section id="Intro">
    <title>Introduction</title>

    <para>Starting with Version 2.5.5, Shorewall has builtin support for
    traffic shaping and control. Before this version, the support was quite
    limited. You were able to use your own tcstart script (and you still are),
    but besides the tcrules file it was not possible to define classes or
    queueing discplines inside the Shorewall config files.</para>

    <para>The support for traffic shaping and control still does not cover all
    options available (and especially all algorithms that can be used to queue
    traffic) in the Linux kernel but it should fit most needs. If you are
    using your own script for traffic control and you still want to use it in
    the future, you will find information on how to do this, <link
    linkend="owntcstart"> later in this document</link>. But for this to work,
    you will also need to enable traffic shaping in the kernel and Shorewall
    as covered by the next sections.</para>
  </section>

  <section id="LinuxTC">
    <title>Linux traffic shaping and control</title>

    <para>This section gives a brief introduction of how controlling traffic
    with the linux kernel works. Although this might be enough for configuring
    it in the Shorewall configuration files, we strongly recommend that you
    take a deeper look into the <ulink url="http://lartc.org/howto/">Linux
    Advanced Routing and Shaping HOWTO</ulink>. At the time of writing this,
    the current version is 1.0.0.</para>

    <para>Since kernel 2.2 Linux has extensive support for controlling
    traffic. You can define different algorithms that are used to queue the
    traffic before it leaves an interface. The standard one is called pfifo
    and is (as the name suggests) of the type First In First out. This means,
    that it does not shape anything, if you have a connection that eats up all
    your bandwidth, this qeueing algorithm will not stop it from doing
    so.</para>

    <para>For Shorewall traffic shaping we use two algorithms, one is called
    HTB (Hierarchical Token Bucket) and SFQ (Stochastic Fairness Queuing). SFQ
    is easy to explain: it just tries to track your connections (tcp or udp
    streams) and balances the traffic between them. This normally works well.
    HTB allows you to define a set of classes, and you can put the traffic you
    want into these classes. You can define minimum and maximum bandwitdh
    settings for those classes and order them hierachically (the less
    priorized classes only get bandwitdth if the more important have what they
    need). Shorewall builtin traffic shaping allows you to define these
    classes (and their bandwidth limits), and it uses SFQ inside these classes
    to make sure, that different data streams are handled equally.</para>

    <para><emphasis role="bold">If you are running Shorewall-shell or if you
    are running Shorewall-perl 4.1.5 or earlier:</emphasis><blockquote>
        <para><emphasis role="bold">You can only shape outgoing traffic. The
        reason for this is simple, the packets were already received by your
        network card before you can decide what to do with them</emphasis>. So
        the only choice would be to drop them which normally makes no sense
        (since you received the packet already, it went through the possible
        bottleneck (the incoming connection). The next possible bottleneck
        might come if the packet leaves on another interface, so this will be
        the place where queuing might occur. So, defining queues for incoming
        packets is not very useful, you just want to have it forwarded to the
        outgoing interface as fast as possible.</para>

        <para>There is one exception, though. Limiting incoming traffic to a
        value a bit slower than your actual line speed will avoid queueing on
        the other end of that connection. This is mostly useful if you don't
        have access to traffic control on the other side and if this other
        side has a faster network connection than you do (the line speed
        between the systems is the bottleneck, e.g. a DSL or Cable Modem
        connection to your provider's router, the router itself is normally
        connected to a much faster backbone). So, if you drop packets that are
        coming in too fast, the underlying protocol might recognize this and
        slow down the connection. TCP has a builtin mechanism for this, UDP
        has not (but the protocol over UDP might recognize it , if there is
        any).</para>

        <para>The reason why queing is bad in these cases is, that you might
        have packets which need to be priorized over others, e.g. VoIP or ssh.
        For this type of connections it is important that packets arrive in a
        certain amount of time. For others like http downloads, it does not
        really matter if it takes a few seconds more.</para>

        <para>If you have a large queue on the other side and the router there
        does not care about QoS or the QoS bits are not set properly, your
        important packets will go into the same queue as your less
        timecritical download packets which will result in a large
        delay.</para>
      </blockquote></para>

    <para><emphasis role="bold">If you are running Shorewall-perl 4.1.6 or
    later:</emphasis><blockquote>
        <para>You can shape incoming traffic through use of an
        <firstterm>Intermediate Frame Block</firstterm> (IFB) device. <link
        linkend="IFB">See below</link>. <emphasis role="bold">But beware:
        using an IFB can result in queues building up both at your ISPs router
        and at your own.</emphasis></para>
      </blockquote></para>

    <para><emphasis role="bold">This is not to say that you cannot shape
    download traffic, regardless of which Shorewall release you are
    running</emphasis>.</para>

    <blockquote>
      <para>If you wish to shape downloads, you can always configure traffic
      shaping on your firewall's local interface. An example appears <link
      linkend="Downloads">below</link>.</para>

      <para>Again, however, <emphasis role="bold">this can result in queues
      building up both at your ISPs router and at your own</emphasis>.</para>
    </blockquote>

    <para>You shape and control outgoing traffic by assigning the traffic to
    <firstterm>classes</firstterm>. Each class is associated with exactly one
    network interface and has a number of attributes:</para>

    <orderedlist>
      <listitem>
        <para>PRIORITY - Used to give preference to one class over another
        when selecting a packet to send. The priority is a numeric value with
        1 being the highest priority, 2 being the next highest, and so
        on.</para>
      </listitem>

      <listitem>
        <para>RATE - The minimum bandwidth this class should get, when the
        traffic load rises. Classes with a higher priority (lower PRIORITY
        value) are served even if there are others that have a guaranteed
        bandwith but have a lower priority (higher PRIORITY value).</para>
      </listitem>

      <listitem>
        <para>CEIL - The maximum bandwidth the class is allowed to use when
        the link is idle.</para>
      </listitem>

      <listitem>
        <para>MARK - Netfilter has a facility for
        <firstterm>marking</firstterm> packets. Packet marks have a numeric
        value which is limited in Shorewall to the values 1-255. You assign
        packet marks to different types of traffic using entries in the
        <filename>/etc/shorewall/tcrules</filename> file.</para>
      </listitem>
    </orderedlist>

    <para>One class for each interface must be designated as the
    <firstterm>default class</firstterm>. This is the class to which unmarked
    traffic (packets to which you have not assigned a mark value in
    <filename>/etc/shorewall/tcrules</filename>) is assigned.</para>

    <para>Netfilter also supports a mark value on each connection. You can
    assign connection mark values in
    <filename>/etc/shorewall/tcrules</filename>, you can copy the current
    packet's mark to the connection mark (SAVE), or you can copy the
    connection mark value to the current packet's mark (RESTORE). For more
    information, see<ulink url="PacketMarking.html"> this
    article</ulink>.</para>
  </section>

  <section id="Kernel">
    <title>Linux Kernel Configuration</title>

    <para>You will need at least kernel 2.4.18 for this to work, please take a
    look at the following screenshot for what settings you need to enable. For
    builtin support, you need the HTB scheduler, the Ingress scheduler, the
    PRIO pseudoscheduler and SFQ queue. The other scheduler or queue
    algorithms are not needed.</para>

    <para>This screen shot shows how I configured QoS in a 2.6.16
    Kernel:</para>

    <graphic align="center" fileref="images/traffic_shaping2.6.png" />

    <para>And here's my recommendation for a 2.6.21 kernel:<graphic
    align="center" fileref="images/traffic_shaping2.6.21.png" /></para>
  </section>

  <section id="Shorewall">
    <title>Enable TC support in Shorewall</title>

    <para>You need this support whether you use the builtin support or whether
    you provide your own tcstart script.</para>

    <para>To enable the builtin traffic shaping and control in Shorewall, you
    have to do the following:</para>

    <itemizedlist>
      <listitem>
        <para>Set <emphasis role="bold">TC_ENABLED</emphasis> to "<emphasis
        role="bold">Internal</emphasis>" in /etc/shorewall/shorewall.conf.
        Setting <emphasis role="bold">TC_ENABLED=Yes</emphasis> causes
        Shorewall to look for an external tcstart file (See <link
        linkend="tcstart">a later section</link> for details).</para>
      </listitem>

      <listitem>
        <para>Setting <emphasis role="bold">CLEAR_TC</emphasis> parameter in
        /etc/shorewall/shorewall.conf to <emphasis role="bold">Yes</emphasis>
        will clear the traffic shaping configuration during Shorewall
        [re]start and Shorewall stop. This is normally what you want when
        using the builtin support (and also if you use your own tcstart
        script)</para>
      </listitem>

      <listitem>
        <para>The other steps that follow depend on whether you use your own
        script or the builtin solution. They will be explained in the
        following sections.</para>
      </listitem>
    </itemizedlist>
  </section>

  <section id="Builtin">
    <title>Using builtin traffic shaping/control</title>

    <para>Shorewall's builtin traffic shaping feature provides a thin layer on
    top of the ingress qdesc, HTB and SFQ. That translation layer allows you
    to:</para>

    <itemizedlist>
      <listitem>
        <para>Define HTB classes using Shorewall-style column-oriented
        configuration files.</para>
      </listitem>

      <listitem>
        <para>Integrate the reloading of your traffic shaping configuration
        with the reloading of your packet-filtering and marking
        configuration.</para>
      </listitem>

      <listitem>
        <para>Assign traffic to HTB classes by TOS value.</para>
      </listitem>

      <listitem>
        <para>Assign outgoing TCP ACK packets to an HTB class.</para>
      </listitem>

      <listitem>
        <para>Assign traffic to HTB classes based on packet mark value.</para>
      </listitem>
    </itemizedlist>

    <warning>
      <para>Shorewall's builtin traffic shaping feature is limited to ten (10)
      devices.</para>
    </warning>

    <para>Those few features are really all that builtin traffic
    shaping/control provides; consequently, you need to understand HTB and
    Linux traffic shaping as well as Netfilter packet marking in order to use
    the facility. Again, please see the links at top of this article.</para>

    <para>For defining bandwidths (for either devices or classes) please use
    kbit or kbps(for Kilobytes per second) and make sure there is <emphasis
    role="bold">NO</emphasis> space between the number and the unit (it is
    100kbit <emphasis role="bold">not</emphasis> 100 kbit). Using mbit, mbps
    or a raw number (which means bytes) could be used, but note that only
    integer numbers are supported (0.5 is <emphasis role="bold">not
    valid</emphasis>).</para>

    <para><emphasis role="bold">To properly configure the settings for your
    devices you need to find out the real up- and downstream rates you
    have</emphasis>. This is especially the case, if you are using a DSL
    connection or one of another type that do not have a guaranteed bandwidth.
    Don't trust the values your provider tells you for this; especially
    measuring the real download speed is important! There are several online
    tools that help you find out; search for "dsl speed test" on google (For
    Germany you can use <ulink
    url="http://www.speedcheck.arcor.de/cgi-bin/speedcheck.cgi">arcor speed
    check</ulink>). Be sure to choose a test located near you.</para>

    <section id="tcdevices">
      <title>/etc/shorewall/tcdevices</title>

      <para>This file allows you to define the incoming and outgoing bandwidth
      for the devices you want traffic shaping to be enabled. That means, if
      you want to use traffic shaping for a device, you have to define it
      here.</para>

      <para>Columns in the file are as follows:</para>

      <itemizedlist>
        <listitem>
          <para>INTERFACE - Name of interface. Each interface may be listed
          only once in this file. You may NOT specify the name of an alias
          (e.g., eth0:0) here; see <ulink url="FAQ.htm#faq18">FAQ #18</ulink>.
          You man NOT specify wildcards here, e.g. if you have multiple ppp
          interfaces, you need to put them all in here! With Shorewall
          versions prior to 3.0.8 and 3.2.0 Beta 8, the device named in this
          column must exist at the time that Shorewall is started, restarted
          or refreshed. Beginning with Shorewall 3.0.8 and 3.2.0 Beta 8,
          Shorewall will determine if the device exists and will only
          configure the device if it does exist. If it doesn't exist, the
          following warning is issued:</para>

          <para><emphasis role="bold">WARNING: Device &lt;device name&gt; not
          found -- traffic-shaping configuration skipped</emphasis></para>

          <para>Shorewall assigns a sequential <firstterm>interface
          number</firstterm> to each interface (the first entry in
          <filename>/etc/shorewall/tcdevices</filename> is interface 1, the
          second is interface 2 and so on) Beginning with Shorewall-perl
          4.1.6, you can explicitly specify the interface number by prefixing
          the interface name with the number and a colon (":"). Example:
          1:eth0.</para>
        </listitem>

        <listitem>
          <para>IN-BANDWIDTH - The incoming Bandwidth of that interface.
          Please note that when you use this column, you are not traffic
          shaping incoming traffic, as the traffic is already received before
          you could do so. This Column allows you to define the maximum
          traffic allowed for this interface in total, if the rate is
          exceeded, the excess packets are dropped. You want this mainly if
          you have a DSL or Cable Connection to avoid queuing at your
          providers side. If you don't want any traffic to be dropped set this
          to a value faster than your interface maximum rate (or to 0 (zero),
          if you are running Shorewall 3.2.6 or later).</para>

          <para>To determine the optimum value for this setting, we recommend
          that you start by setting it significantly below your measured
          download bandwidth (20% or so). While downloading, measure the
          <emphasis>ping</emphasis> response time from the firewall to the
          upstream router as you gradually increase the setting.The optimal
          setting is at the point beyond which the <emphasis>ping</emphasis>
          time increases sharply as you increase the setting.</para>
        </listitem>

        <listitem>
          <para>OUT-BANDWIDTH - Specifiy the outgoing bandwidth of that
          interface. This is the maximum speed your connection can handle. It
          is also the speed you can refer as "full" if you define the tc
          classes. Outgoing traffic above this rate will be dropped.</para>
        </listitem>

        <listitem>
          <para>OPTIONS (Added in Shorewall-perl 4.1.4) — A comma-separated
          list of options from the following list:</para>

          <variablelist>
            <varlistentry>
              <term>classify</term>

              <listitem>
                <para>If specified, classification of traffic into the various
                classes is done by CLASSIFY entries in
                <filename>/etc/shorewall/tcrules</filename> or by entries in
                <filename>/etc/shorewall/tcfilters</filename>. No MARK value
                will be associated with classes on this interface.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>

        <listitem>
          <para>REDIRECTED INTERFACES (Added in Shorewall-perl 4.1.6) —
          Entries are appropriate in this column only if the device in the
          INTERFACE column names a <link linkend="IFB">Intermediate Frame
          Block (IFB)</link>. It lists the physical interfaces that will have
          their input shaped using classes defined on the IFB. Neither the IFB
          nor any of the interfaces listed in this column may have an
          IN-BANDWIDTH specified. You may specify zero (0) or a dash ("-:) in
          the IN-BANDWIDTH column.</para>

          <para>IFB devices automatically get the <emphasis
          role="bold">classify</emphasis> option.</para>
        </listitem>
      </itemizedlist>

      <example id="Example0">
        <title></title>

        <para>Suppose you are using PPP over Ethernet (DSL) and ppp0 is the
        interface for this. The device has an outgoing bandwidth of 500kbit
        and an incoming bandwidth of 6000kbit</para>

        <programlisting>#INTERFACE    IN-BANDWITH      OUT-BANDWIDTH
ppp0           6000kbit         500kbit</programlisting>
      </example>
    </section>

    <section id="tcclasses">
      <title>/etc/shorewall/tcclasses</title>

      <para>This file allows you to define the actual classes that are used to
      split the outgoing traffic.</para>

      <itemizedlist>
        <listitem>
          <para>INTERFACE - Name of interface. Users of Shorewall-perl 4.1.6
          or later may also specify the interface number. Must match the name
          (or number) of an interface with an entry in
          <filename>/etc/shorewall/tcdevices</filename>. If the interface has
          the <emphasis role="bold">classify</emphasis> option in
          <filename>/etc/shorewall/tcdevices</filename>, then the interface
          name or number must be followed by a colon and a <firstterm>class
          number</firstterm>. Examples: eth0:1, 4:9. Class numbers must be
          unique for a given interface.</para>
        </listitem>

        <listitem>
          <para>MARK - The mark value which is an integer in the range 1-255.
          You define these marks in the tcrules file, marking the traffic you
          want to go into the queueing classes defined in here. You can use
          the same marks for different Interfaces. You must specify "-' in
          this column if the device specified in the INTERFACE column has the
          <emphasis role="bold">classify</emphasis> option in
          <filename>/etc/shorewall/tcdevices</filename>.</para>
        </listitem>

        <listitem>
          <para>RATE - The minimum bandwidth this class should get, when the
          traffic load rises. Please note that first the classes which equal
          or a lesser priority value are served even if there are others that
          have a guaranteed bandwith but a lower priority. <emphasis
          role="bold">If the sum of the RATEs for all classes assigned to an
          INTERFACE exceed that interfaces's OUT-BANDWIDTH, then the
          OUT-BANDWIDTH limit will not be honored.</emphasis></para>
        </listitem>

        <listitem>
          <para>CEIL - The maximum bandwidth this class is allowed to use when
          the link is idle. Useful if you have traffic which can get full
          speed when more important services (e.g. interactive like ssh) are
          not used. You can use the value "full" in here for setting the
          maximum bandwidth to the defined output bandwidth of that
          interface.</para>
        </listitem>

        <listitem>
          <para>PRIORITY - you have to define a priority for the class.
          packets in a class with a higher priority (=lesser value) are
          handled before less priorized onces. You can just define the mark
          value here also, if you are increasing the mark values with lesser
          priority.</para>
        </listitem>

        <listitem>
          <para>OPTIONS - A comma-separated list of options including the
          following:</para>

          <itemizedlist>
            <listitem>
              <para>default - this is the default class for that interface
              where all traffic should go, that is not classified
              otherwise.</para>

              <note>
                <para>defining default for exactly <emphasis
                role="bold">one</emphasis> class per interface is
                mandatory!</para>
              </note>
            </listitem>

            <listitem>
              <para>tos-&lt;tosname&gt; - this lets you define a filter for
              the given &lt;tosname&gt; which lets you define a value of the
              Type Of Service bits in the ip package which causes the package
              to go in this class. Please note, that this filter overrides all
              mark settings, so if you define a tos filter for a class all
              traffic having that mark will go in it regardless of the mark on
              the package. You can use the following for this option:
              tos-minimize-delay (16) tos-maximize-throughput (8)
              tos-maximize-reliability (4) tos-minimize-cost (2)
              tos-normal-service (0)</para>

              <note>
                <para>Each of this options is only valid for <emphasis
                role="bold">one</emphasis> class per interface.</para>
              </note>
            </listitem>

            <listitem>
              <para>tcp-ack - if defined causes an tc filter to be created
              that puts all tcp ack packets on that interface that have an
              size of &lt;=64 Bytes to go in this class. This is useful for
              speeding up downloads. Please note that the size of the ack
              packets is limited to 64 bytes as some applications (p2p for
              example) use to make every package an ack package which would
              cause them all into here. We want only packets WITHOUT payload
              to match, so the size limit. Bigger packets just take their
              normal way into the classes.</para>

              <note>
                <para>This option is only valid for <emphasis
                role="bold">class</emphasis> per interface.</para>
              </note>
            </listitem>
          </itemizedlist>
        </listitem>
      </itemizedlist>
    </section>

    <section id="tcrules">
      <title>/etc/shorewall/tcrules</title>

      <important>
        <para>Unlike rules in the <ulink
        url="manpages/shorewall-rules.html">shorewall-rules</ulink>(5) file,
        evaluation of rules in this file will continue after a match. So the
        final mark for each packet will be the one assigned by the LAST tcrule
        that matches.</para>
      </important>

      <para>The fwmark classifier provides a convenient way to classify
      packets for traffic shaping. The <quote>/etc/shorewall/tcrules</quote>
      file is used for specifying these marks in a tabular fashion. For an
      in-depth look at the packet marking facility in Netfilter/Shorewall,
      please see <ulink url="PacketMarking.html">this article</ulink>.</para>

      <para>Normally, packet marking occurs in the PREROUTING chain before any
      address rewriting takes place. This makes it impossible to mark inbound
      packets based on their destination address when SNAT or Masquerading are
      being used. You can cause packet marking to occur in the FORWARD chain
      by using the MARK_IN_FORWARD_CHAIN option in shorewall.conf.</para>

      <para>Columns in the file are as follows:</para>

      <itemizedlist>
        <listitem>
          <para>MARK or CLASSIFY - MARK specifies the mark value is to be
          assigned in case of a match. This is an integer in the range 1-255.
          This value may be optionally followed by <quote>:</quote> and either
          <quote>F</quote>, <quote>P</quote> or "T" to designate that the
          marking will occur in the FORWARD, PREROUTING or POSTROUTING chains
          respectively. If this additional specification is omitted, the chain
          used to mark packets will be determined as follows:</para>

          <itemizedlist>
            <listitem>
              <para>If the SOURCE is
              $FW[:&lt;<emphasis>address</emphasis>&gt;], then the rule is
              inserted in the OUTPUT chain.</para>
            </listitem>

            <listitem>
              <para>Otherwise, the chain is determined by the setting of the
              MARK_IN_FORWARD_CHAIN option in shorewall.conf.</para>
            </listitem>
          </itemizedlist>

          <note>
            <para>The "T" qualifier was added in Shorewall version 3.3.6 and
            is not available in earlier versions.</para>
          </note>

          <para>Normally, the mark is applied to the packet. If you follow the
          mark value with ":" and "C", then the mark is applied to the
          connection. "C" can be combined with "F", "P" or "T" to designate
          that the connection should be marked in a particular chain (e.g.,
          "CF", "CP", "CT").</para>

          <para>There are additional special values available:</para>

          <orderedlist numeration="loweralpha">
            <listitem>
              <para><emphasis
              role="bold">RESTORE</emphasis>[/<emphasis>mask</emphasis>] --
              restore the packet's mark from the connection's mark using the
              supplied mask if any. Your kernel and iptables must include
              CONNMARK support.</para>

              <para>As above, may be followed by <emphasis
              role="bold">:P</emphasis>, <emphasis role="bold">:F</emphasis>
              or <emphasis role="bold">:T</emphasis>.</para>
            </listitem>

            <listitem>
              <para><emphasis
              role="bold">SAVE</emphasis>[/<emphasis>mask</emphasis>] -- save
              the packet's mark to the connection's mark using the supplied
              mask if any. Your kernel and iptables must include CONNMARK
              support.</para>

              <para>As above, may be followed by <emphasis
              role="bold">:P</emphasis>, <emphasis role="bold">:F</emphasis>
              or <emphasis role="bold">:T</emphasis>.</para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">CONTINUE</emphasis> Don't process
              any more marking rules in the table.</para>

              <para>As above, may be followed by <emphasis
              role="bold">:P</emphasis>, <emphasis role="bold">:F</emphasis>
              or <emphasis role="bold">:T</emphasis>.</para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">COMMENT</emphasis> (Added in
              Shorewall version 3.3.3) -- the rest of the line will be
              attached as a comment to the Netfilter rule(s) generated by the
              following entries. The comment will appear delimited by "/* ...
              */" in the output of <command>shorewall show
              mangle</command></para>

              <para>To stop the comment from being attached to further rules,
              simply include COMMENT on a line by itself.</para>
            </listitem>
          </orderedlist>

          <para>To use CLASSIFY, your kernel and iptables must include
          CLASSIFY target support. In that case, this column contains a
          classification (classid) of the form &lt;major&gt;:&lt;minor&gt;
          where &lt;major&gt; and &lt;minor&gt; are integers. Corresponds to
          the 'class' specification in these traffic shaping modules:</para>

          <simplelist>
            <member>atm</member>

            <member>cbq</member>

            <member>dsmark</member>

            <member>pfifo_fast</member>

            <member>htb</member>

            <member>prio</member>
          </simplelist>

          <para>With Shorewall versions prior to 3.2.3, classify rules are
          always placed in the POSTROUTING chain. Beginning with Shorewall
          3.2.3, classification occurs in the POSTROUTING chain <emphasis
          role="bold">except</emphasis> when the SOURCE contains
          $FW[:&lt;<emphasis>address</emphasis>&gt;] in which case, the
          classify action takes place in the OUTPUT chain. When used with the
          builtin traffic shaper, the &lt;major&gt; class is the interface
          number and the &lt;minor&gt; class is either a) the MARK value of
          the class preceded by the number "1" (MARK value 1 is &lt;minor&gt;
          class 11, MARK value 22 is &lt;minor&gt; class 122, and so on) or b)
          The class number (if the <emphasis role="bold">classify</emphasis>
          option was specified in for the interface
          <filename>/etc/shorewall/interfaces</filename>)</para>
        </listitem>

        <listitem>
          <para>SOURCE - Source of the packet. A comma-separated list of
          interface names, IP addresses, MAC addresses and/or subnets for
          packets being routed through a common path. List elements may also
          consist of an interface name followed by ":" and an address (e.g.,
          eth1:192.168.1.0/24). For example, all packets for connections
          masqueraded to eth0 from other interfaces can be matched in a single
          rule with several alternative SOURCE criteria. However, a connection
          whose packets gets to eth0 in a different way, e.g., direct from the
          firewall itself, needs a different rule.</para>

          <para>Accordingly, use $FW in its own separate rule for packets
          originating on the firewall. In such a rule, the MARK column may NOT
          specify either ":P" or ":F" because marking for firewall-originated
          packets always occurs in the OUTPUT chain.</para>

          <para>MAC addresses must be prefixed with "~" and use "-" as a
          separator.</para>

          <para>Example: ~00-A0-C9-15-39-78</para>
        </listitem>

        <listitem>
          <para>DEST - Destination of the packet. Comma separated list of IP
          addresses and/or subnets. If your kernel and iptables include
          iprange match support, IP address ranges are also allowed. List
          elements may also consist of an interface name followed by ":" and
          an address (e.g., eth1:192.168.1.0/24). If the MARK column
          specificies a classification of the form &lt;major&gt;:&lt;minor&gt;
          then this column may also contain an interface name.</para>
        </listitem>

        <listitem>
          <para>PROTO - Protocol - Must be "tcp", "udp", "icmp", "ipp2p",
          "ipp2p:udp", "ipp2p:all" a number, or "all". "ipp2p" requires ipp2p
          match support in your kernel and iptables.</para>
        </listitem>

        <listitem>
          <para>PORT(S) - Destination Ports. A comma-separated list of Port
          names (from /etc/services), port numbers or port ranges; if the
          protocol is "icmp", this column is interpreted as the destination
          icmp-type(s).</para>

          <para>If the protocol is ipp2p, this column is interpreted as an
          ipp2p option without the leading "--" (example "bit" for
          bit-torrent). If no PORT is given, "ipp2p" is assumed.</para>

          <para>This column is ignored if PROTOCOL = all but must be entered
          if any of the following field is supplied. In that case, it is
          suggested that this field contain "-"</para>
        </listitem>

        <listitem>
          <para>CLIENT PORT(S) - (Optional) Port(s) used by the client. If
          omitted, any source port is acceptable. Specified as a
          comma-separate list of port names, port numbers or port
          ranges.</para>
        </listitem>

        <listitem>
          <para>USER/GROUP (Added in Shorewall version 1.4.10) - (Optional)
          This column may only be non-empty if the SOURCE is the firewall
          itself. When this column is non-empty, the rule applies only if the
          program generating the output is running under the effective user
          and/or group. It may contain :</para>

          <para>[!][&lt;user name or number&gt;]:[&lt;group name or
          number&gt;][+&lt;program name&gt;]</para>

          <para>The colon is optionnal when specifying only a user.</para>

          <para>Examples:</para>

          <programlisting>joe     #program must be run by joe
:kids   #program must be run by a member of the 'kids' group
!:kids  #program must not be run by a member of the 'kids' group
+upnpd  #program named upnpd (This feature was removed from Netfilter in kernel version 2.6.14).</programlisting>
        </listitem>

        <listitem>
          <para>TEST - Defines a test on the existing packet or connection
          mark. The rule will match only if the test returns true. Tests have
          the format [!]&lt;value&gt;[/&lt;mask&gt;][:C]</para>

          <para>Where:</para>

          <simplelist>
            <member>! Inverts the test (not equal)</member>

            <member>&lt;value&gt; Value of the packet or connection
            mark.</member>

            <member>&lt;mask&gt; A mask to be applied to the mark before
            testing</member>

            <member>:C Designates a connection mark. If omitted, the packet
            mark's value is tested.</member>
          </simplelist>
        </listitem>

        <listitem>
          <para>LENGTH (Optional, added in Shorewall version 3.2.0) Packet
          Length - This field, if present, allows you to match the length of a
          packet against a specific value or range of values. A range is
          specified in the form &lt;min&gt;:&lt;max&gt; where either
          &lt;min&gt; or &lt;max&gt; (but not both) may be omitted. If
          &lt;min&gt; is omitted, then 0 is assumed; if &lt;max&gt; is
          omitted, than any packet that is &lt;min&gt; or longer will
          match.</para>

          <para>You must have iptables length support for this to work. If you
          let it empy or place an "-" here, no length match will be
          done.</para>

          <para>Examples: 1024, 64:1500, :100</para>
        </listitem>

        <listitem>
          <para>TOS (Optional, added in Shorewall version 3.2.0 Beta 6) Type
          of Service. Either a standard name, or a numeric value to
          match.</para>

          <blockquote>
            <simplelist>
              <member>Minimize-Delay (16)</member>

              <member>Maximize-Throughput (8)</member>

              <member>Maximize-Reliability (4)</member>

              <member>Minimize-Cost (2)</member>

              <member>Normal-Service (0)</member>
            </simplelist>
          </blockquote>
        </listitem>

        <listitem>
          <para>HELPER (Optional, added in Shorewall version 4.2.0 Beta 2).
          Names one of the Netfiler protocol helper modules such as
          <emphasis>ftp</emphasis>, <emphasis>sip</emphasis>,
          <emphasis>amanda</emphasis>, etc.</para>
        </listitem>
      </itemizedlist>

      <example id="Example1">
        <title></title>

        <para>All packets arriving on eth1 should be marked with 1. All
        packets arriving on eth2 and eth3 should be marked with 2. All packets
        originating on the firewall itself should be marked with 3.</para>

        <programlisting>#MARK   SOURCE    DESTINATION    PROTOCOL   PORT(S)
1       eth1      0.0.0.0/0      all
2       eth2      0.0.0.0/0      all
2       eth3      0.0.0.0/0      all
3       $FW       0.0.0.0/0     all</programlisting>
      </example>

      <example id="Example2">
        <title></title>

        <para>All GRE (protocol 47) packets not originating on the firewall
        and destined for 155.186.235.151 should be marked with 12.</para>

        <programlisting>#MARK   SOURCE    DESTINATION     PROTOCOL   PORT(S)
12      0.0.0.0/0 155.182.235.151 47</programlisting>
      </example>

      <example id="Example3">
        <title></title>

        <para>All SSH request packets originating in 192.168.1.0/24 and
        destined for 155.186.235.151 should be marked with 22.</para>

        <programlisting>#MARK   SOURCE         DESTINATION     PROTOCOL   PORT(S)
22      192.168.1.0/24 155.182.235.151 tcp        22</programlisting>
      </example>

      <example id="Example4">
        <title></title>

        <para>All SSH packets packets going out of the first device in in
        /etc/shorewall/tcdevices should be assigned to the class with mark
        value 10.</para>

        <programlisting>#MARK   SOURCE         DESTINATION     PROTOCOL   PORT(S)         CLIENT
#                                                                 PORT(S)
1:110   0.0.0.0/0      0.0.0.0/0       tcp        22
1:110   0.0.0.0/0      0.0.0.0/0       tcp        -               22</programlisting>
      </example>

      <example id="Example5">
        <title></title>

        <para>Mark all ICMP echo traffic with packet mark 1. Mark all peer to
        peer traffic with packet mark 4.</para>

        <para>This is a little more complex than otherwise expected. Since the
        ipp2p module is unable to determine all packets in a connection are
        P2P packets, we mark the entire connection as P2P if any of the
        packets are determined to match. We assume packet/connection mark 0 to
        means unclassified.</para>

        <programlisting>#MARK    SOURCE         DESTINATION     PROTOCOL   PORT(S)       CLIENT   USER/     TEST
#                                                                PORT(S)  GROUP
1        0.0.0.0/0      0.0.0.0/0       icmp       echo-request
1        0.0.0.0/0      0.0.0.0/0       icmp       echo-reply

RESTORE  0.0.0.0/0      0.0.0.0/0       all        -             -        -         0
CONTINUE 0.0.0.0/0      0.0.0.0/0       all        -             -        -         !0
4        0.0.0.0/0      0.0.0.0/0       ipp2p:all
SAVE     0.0.0.0/0      0.0.0.0/0       all        -             -        -         !0</programlisting>

        <para>The last four rules can be translated as:</para>

        <blockquote>
          <para>"If a packet hasn't been classifed (packet mark is 0), copy
          the connection mark to the packet mark. If the packet mark is set,
          we're done. If the packet is P2P, set the packet mark to 4. If the
          packet mark has been set, save it to the connection mark."</para>
        </blockquote>
      </example>

      <example>
        <title></title>

        <para>Mark all forwarded VOIP connections with connection mark 1 and
        ensure that all VOIP packets also receive that mark (assumes that
        nf_conntrack_sip is loaded and that Shorewall-perl 4.2.0 or later is
        being used).</para>

        <programlisting>#MARK    SOURCE         DESTINATION     PROTOCOL   PORT(S)       CLIENT   USER/     TEST      CONNBYTES      TOS      HELPER
#                                                                PORT(S)  GROUP
RESTORE  0.0.0.0/0      0.0.0.0/0       all        -             -        -         0
CONTINUE 0.0.0.0/0      0.0.0.0/0       all        -             -        -         !0
1        0.0.0.0/0      0.0.0.0/0       all        -             -        -         -         -              -        sip
SAVE     0.0.0.0/0      0.0.0.0/0       all        -             -        -         !0</programlisting>
      </example>
    </section>

    <section id="ppp">
      <title>ppp devices</title>

      <para>If you use ppp/pppoe/pppoa) to connect to your internet provider
      and you use traffic shaping you need to restart shorewall traffic
      shaping. The reason for this is, that if the ppp connection gets
      restarted (and it usally does this at least daily), all
      <quote>tc</quote> filters/qdiscs related to that interface are
      deleted.</para>

      <para>The easiest way to achieve this, is just to restart shorewall once
      the link is up. To achieve this add a small executable script
      to<quote>/etc/ppp/ip-up.d</quote>.</para>

      <programlisting>#! /bin/sh

/sbin/shorewall refresh</programlisting>
    </section>

    <section id="Real">
      <title>Real life examples</title>

      <section id="Wondershaper">
        <title>Configuration to replace Wondershaper</title>

        <para>You are able to fully replace the wondershaper script by using
        the buitin traffic control.You can find example configuration files at
        <ulink
        url="http://www1.shorewall.net/pub/shorewall/Samples/tc4shorewall/">"http://www1.shorewall.net/pub/shorewall/Samples/tc4shorewall/</ulink>.
        Please note that they are just examples and need to be adjusted to
        work for you. In this example it is assumed that your interface for
        you internet connection is ppp0 (for DSL), if you use another
        connection type, you have to change it. You also need to change the
        settings in the tcdevices.wondershaper file to reflect your line
        speed. The relevant lines of the config files follow here. Please note
        that this is just a 1:1 replacement doing exactly what wondershaper
        should do. You are free to change it...</para>

        <section id="realtcd">
          <title>tcdevices file</title>

          <programlisting>#INTERFACE    IN-BANDWITH      OUT-BANDWIDTH
ppp0            5000kbit        500kbit</programlisting>
        </section>

        <section id="realtcc">
          <title>tcclasses file</title>

          <programlisting>#INTERFACE      MARK    RATE            CEIL        PRIORITY    OPTIONS
ppp0            1       5*full/10       full            1       tcp-ack,tos-minimize-delay
ppp0            2       3*full/10       9*full/10       2       default
ppp0            3       2*full/10       8*full/10       2</programlisting>
        </section>

        <section id="realtcr">
          <title>tcrules file</title>

          <programlisting>#MARK           SOURCE          DEST            PROTO   PORT(S) CLIENT   USER
#                                                              PORT(S)
1:F             0.0.0.0/0       0.0.0.0/0       icmp    echo-request
1:F             0.0.0.0/0       0.0.0.0/0       icmp    echo-reply
# mark traffic which should have a lower priority with a 3:
# mldonkey
3               0.0.0.0/0       0.0.0.0/0       udp     -        4666</programlisting>

          <para>Wondershaper allows you to define a set of hosts and/or ports
          you want to classify as low priority. To achieve this , you have to
          add these hosts to tcrules and set the mark to 3 (true if you use
          the example configuration files).</para>
        </section>

        <section id="lowpro">
          <title>Setting hosts to low priority</title>

          <para>lets assume the following settings from your old wondershaper
          script (don't assume these example values are really useful, they
          are only used for demonstrating ;-):</para>

          <programlisting>
# low priority OUTGOING traffic - you can leave this blank if you want
# low priority source netmasks
NOPRIOHOSTSRC="192.168.1.128/25 192.168.3.28"

# low priority destination netmasks
NOPRIOHOSTDST=60.0.0.0/24

# low priority source ports
NOPRIOPORTSRC="6662 6663"

# low priority destination ports
NOPRIOPORTDST="6662 6663"  </programlisting>

          <para>This would result in the following additional settings to the
          tcrules file:</para>

          <programlisting>3               192.168.1.128/25 0.0.0.0/0      all
3               192.168.3.28     0.0.0.0/0      all
3               0.0.0.0/0        60.0.0.0/24    all
3               0.0.0.0/0        0.0.0.0/0      udp     6662,6663
3               0.0.0.0/0        0.0.0.0/0      udp     -         6662,6663
3               0.0.0.0/0        0.0.0.0/0      tcp     6662,6663
3               0.0.0.0/0        0.0.0.0/0      tcp     -         6662,6663</programlisting>
        </section>
      </section>

      <section id="simiple">
        <title>A simple setup</title>

        <para>This is a simple setup for people sharing an internet connection
        and using different computers for this. It just basically shapes
        between 2 hosts which have the ip addresses 192.168.2.23 and
        192.168.2.42</para>

        <section id="simpletcd">
          <title>tcdevices file</title>

          <programlisting>#INTERFACE    IN-BANDWITH      OUT-BANDWIDTH
ppp0            6000kbit        700kbit</programlisting>

          <para>We have 6mbit down and 700kbit upstream.</para>
        </section>

        <section id="simpletcc">
          <title>tcclasses file</title>

          <programlisting>#INTERFACE      MARK    RATE            CEIL            PRIORITY    OPTIONS
ppp0            1       10kbit          50kbit          1           tcp-ack,tos-minimize-delay
ppp0            2       300kbit         full            2
ppp0            3       300kbit         full            2
ppp0            4       90kbit          200kbit         3           default</programlisting>

          <para>We add a class for tcp ack packets with highest priority, so
          that downloads are fast. The following 2 classes share most of the
          bandwidth between the 2 hosts, if the connection is idle, they may
          use full speed. As the hosts should be treated equally they have the
          same priority. The last class is for the remaining traffic.</para>
        </section>

        <section id="simpletcr">
          <title>tcrules file</title>

          <programlisting>#MARK           SOURCE          DEST            PROTO   PORT(S)      CLIENT   USER
#                                                                    PORT(S)
1:F             0.0.0.0/0       0.0.0.0/0       icmp    echo-request
1:F             0.0.0.0/0       0.0.0.0/0       icmp    echo-reply
2:F             192.168.2.23    0.0.0.0/0       all
3:F             192.168.2.42    0.0.0.0/0       all</programlisting>

          <para>We mark icmp ping and replies so they will go into the fast
          interactive class and set a mark for each host.</para>
        </section>
      </section>
    </section>
  </section>

  <section id="Xen">
    <title>A Warning to Xen Users</title>

    <para>If you are running traffic shaping in your dom0 and traffic shaping
    doesn't seem to be limiting outgoing traffic properly, it may be due to
    "checksum offloading" in your domU(s). Check the output of "shorewall show
    tc". Here's an excerpt from the output of that command:</para>

    <programlisting>class htb 1:130 parent 1:1 leaf 130: prio 3 quantum 1500 rate 76000bit <emphasis
        role="bold">ceil 230000bit</emphasis> burst 1537b/8 mpu 0b overhead 0b cburst 1614b/8 mpu 0b overhead 0b level 0 
 Sent 559018700 bytes 75324 pkt (dropped 0, overlimits 0 requeues 0) 
 <emphasis role="bold">rate 299288bit</emphasis> 3pps backlog 0b 0p requeues 0 
 lended: 53963 borrowed: 21361 <emphasis role="bold">giants: 90174</emphasis>
 tokens: -26688 ctokens: -14783</programlisting>

    <para>There are two obvious problems in the above output:</para>

    <orderedlist>
      <listitem>
        <para>The rate (299288) is considerably larger than the ceiling
        (230000).</para>
      </listitem>

      <listitem>
        <para>There are a large number (90174) of giants reported.</para>
      </listitem>
    </orderedlist>

    <para>This problem will be corrected by disabling "checksum offloading" in
    your domU(s) using the <command>ethtool</command> utility. See the <ulink
    url="XenMyWay-Routed.html">one of the Xen articles</ulink> for
    instructions.</para>
  </section>

  <section id="Downloads">
    <title>Shaping Download Traffic</title>

    <para>As stated at the outset, traffic shaping works on traffic being sent
    by the firewall. Download traffic from the Internet to local hosts is sent
    by the firewall over a local interface. So it follows that if you want to
    shape such traffic, you must configure shaping on the local
    interface.</para>

    <para>Shaping of download traffic is most straightforward when there are
    only two interface. That way, traffic leaving the local interface falls
    into only two broad categories:</para>

    <itemizedlist>
      <listitem>
        <para>Traffic being forwarded from the internet</para>
      </listitem>

      <listitem>
        <para>Traffic that originated on the firewall itself</para>
      </listitem>
    </itemizedlist>

    <para>In general, you will want to shape the forwarded traffic and leave
    the local traffic unrestricted.</para>

    <para>Extending the <link linkend="simiple">simple example</link>
    above:</para>

    <para><filename>/etc/shorewall/tcdevices</filename>:<programlisting>#INTERFACE    IN-BANDWITH      OUT-BANDWIDTH
ppp0            6000kbit        700kbit
eth1             -              100mbit</programlisting></para>

    <para>/etc/shorewall/tcclasses:<programlisting>#INTERFACE      MARK    RATE            CEIL            PRIORITY    OPTIONS
ppp0            1       10kbit          50kbit          1           tcp-ack,tos-minimize-delay
ppp0            2       300kbit         full            2
ppp0            3       300kbit         full            2
ppp0            4       90kbit          200kbit         3           default
eth0            1       100kbit         500kbit         1           tcp-ack
eth0            2       3mbit           6mbit           2
eth0            3       3mbit           6mbit           3
eth0            4       94mbit          full            default #for local traffic</programlisting></para>

    <para>/etc/shorewall/tcrules:<programlisting>#MARK           SOURCE          DEST            PROTO   PORT(S)      CLIENT   USER
#                                                                    PORT(S)
1:F             0.0.0.0/0       0.0.0.0/0       icmp    echo-request
1:F             0.0.0.0/0       0.0.0.0/0       icmp    echo-reply
2:F             192.168.2.23    0.0.0.0/0       all
3:F             192.168.2.42    0.0.0.0/0       all
2:F             ppp0            192.168.2.23    all
3:F             ppp0            192.168.2.42    all</programlisting></para>
  </section>

  <section id="IFB">
    <title>Intermediate Frame Block (IFB) Devices</title>

    <para>Beginning with Shorewall 4.1.6, Shorewall-perl includes support for
    IFBs. The principles behind an IFB is fairly simple:</para>

    <itemizedlist>
      <listitem>
        <para>It looks like a network interface although it is never given an
        IPv4 configuration.</para>
      </listitem>

      <listitem>
        <para>Because it is a network interface, queuing disciplines can be
        associated with an IFB.</para>
      </listitem>
    </itemizedlist>

    <para>The magic of an IFB comes in the fact that a filter may be defined
    on a real network interface such that each packet that arrives on that
    interface is queued for the IFB! In that way, the IFB provides a means for
    shaping input traffic.</para>

    <para>To use an IFB, you must have IFB support in your kernel
    (configuration option CONFIG_IFB). Assuming that you have a modular
    kernel, the name of the IFB module is 'ifb' and may be loaded using the
    command <command>modprobe ifb</command> (if you have modprobe installed)
    or <command>insmod /path/to/module/ifb</command>.</para>

    <para>By default, two IFB devices (ifb0 and ifb1) are created. You can
    control that using the numifbs option (e.g., <command>modprobe ifb
    numifbs=1</command>).</para>

    <para>To create a single IFB when Shorewall starts, place the following
    two commands in <filename>/etc/shorewall/init</filename>:</para>

    <programlisting><command>modprobe ifb numifbs=1
ip link set ifb0 up</command></programlisting>

    <para>Entries in <filename>/etc/shorewall/tcrules</filename> have no
    effect on shaping traffic through an IFB. To allow classification of such
    traffic, the /etc/shorewall/tcfilters file has been added. Entries in that
    file create <ulink url="http://b42.cz/notes/u32_classifier/">u32
    classification rules</ulink>.</para>

    <section id="tcfilters">
      <title>/etc/shorewall/tcfilters</title>

      <para>While this file was created to allow shaping of traffic through an
      IFB, the file may be used for general traffic classification as well.
      The file is similar to <ulink
      url="shorewall-tcrules.html">shorewall-tcrules</ulink>(5) with the
      following key exceptions:</para>

      <itemizedlist>
        <listitem>
          <para>The first match determines the classification, whereas in the
          tcrules file, the last match determines the classification.</para>
        </listitem>

        <listitem>
          <para>ipsets are not supported</para>
        </listitem>

        <listitem>
          <para>DNS Names are not supported</para>
        </listitem>

        <listitem>
          <para>filters are applied to packets as they <emphasis>appear on the
          wire</emphasis>. So incoming packets will not have DNAT applied yet
          (the destination IP address will be the external address) and
          outgoing packets will have had SNAT applied.</para>
        </listitem>
      </itemizedlist>

      <para>The last point warrants elaboration. When looking at traffic being
      shaped by an IFB, there are two cases to consider:</para>

      <orderedlist>
        <listitem>
          <para>Requests — packets being sent from remote clients to local
          servers. These packets may undergo subsequent DNAT, either as a
          result of entries in <filename>/etc/shorewall/nat</filename> or as a
          result of DNAT or REDIRECT rules.</para>

          <para>Example: <filename>/etc/shorewall/rules</filename>:</para>

          <programlisting>#ACTION       SOURCE           DEST            PROTO    DEST            SOURCE         ORIGINAL
#                                                       PORT(S)         PORT(S)        DEST
DNAT          net              dmz:192.168.4.5 tcp      80              -              206.124.146.177</programlisting>

          <para>Requests redirected by this rule will have destination IP
          address 206.124.146.177 and destination port 80.</para>
        </listitem>

        <listitem>
          <para>Responses — packets being sent from remote servers to local
          clients. These packets may undergo subsequent DNAT as a result of
          entries in <filename>/etc/shorewall/nat</filename> or in
          <filename>/etc/shorewall/masq</filename>. The packet's destination
          IP address will be the external address specified in the
          entry.</para>

          <para>Example:
          <filename>/etc/shorewall/masq</filename>:<programlisting>#INTERFACE        SOURCE           ADDRESS
eth0              192.168.1.0/24   206.124.146.179</programlisting></para>

          <para>HTTP response packets corresponding to requests that fall
          under that rule will have destination IP address 206.124.146.179 and
          <emphasis role="bold">source</emphasis> port 80.</para>
        </listitem>
      </orderedlist>

      <para>Columns in the file are as follow. As in all Shorewall
      configuration files, a hyphen ("-") may be used to indicate that no
      value is supplied in the column.</para>

      <variablelist>
        <varlistentry>
          <term>CLASS</term>

          <listitem>
            <para>The interface name or number followed by a colon (":") and
            the class number.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>SOURCE</term>

          <listitem>
            <para>SOURCE IP address (host or network). DNS names are not
            allowed.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>DEST</term>

          <listitem>
            <para>DESTINATION IP address (host or network). DNS names are not
            allowed.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>PROTO</term>

          <listitem>
            <para>Protocol name or number.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>DEST PORT(S)</term>

          <listitem>
            <para>Comma-separated list of destination port names or numbers.
            May only be specified if the protocol is TCP, UDP, SCTP or ICMP.
            Port ranges are supported except for ICMP.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>SOURCE PORT</term>

          <listitem>
            <para>Comma-separated list of source port names or numbers. May
            only be specified if the protocol is TCP, UDP or SCTP. Port ranges
            are supported.</para>
          </listitem>
        </varlistentry>
      </variablelist>

      <para>Example:</para>

      <para>I've used this configuration on my own firewall. The IFB portion
      is more for test purposes rather than to serve any well-reasoned QOS
      strategy.</para>

      <para><filename>/etc/shorewall/init</filename>:<programlisting>qt modprobe ifb numifbs=1
qt ip link set dev ifb0 up</programlisting></para>

      <para><filename>/etc/shorewall/tcdevices</filename>:<programlisting>#INTERFACE      IN-BANDWITH     OUT-BANDWIDTH   OPTIONS         REDIRECTED
#                                                               INTERFACES
1:eth0          -               384kbit         classify
2:ifb0          -               1300kbit        -               eth0</programlisting>
      <filename>/etc/shorewall/tcclasses</filename>:<programlisting>#INTERFACE      MARK    RATE            CEIL            PRIORITY        OPTIONS
1:110           -       5*full/10       full            1               tcp-ack,tos-minimize-delay
1:120           -       2*full/10       6*full/10       2               default
1:130           -       2*full/10       6*full/10       3
2:110           -       5*full/10       full            1               tcp-ack,tos-minimize-delay
2:120           -       2*full/10       6*full/10       2               default
2:130           -       2*full/10       6*full/10       3</programlisting><filename>/etc/shorewall/tcfilters</filename>:<programlisting>#INTERFACE:     SOURCE          DEST            PROTO   DEST    SOURCE
#CLASS                                                  PORT(S) PORT(S)
#
#                                  OUTGOING TRAFFIC
#
1:130           206.124.146.178 -               tcp     -       49441,49442    #BITTORRENT on wookie
1:110           206.124.146.178                                                #wookie
1:110           206.124.146.179                                                #SNAT of internal systems
1:110           206.124.146.180                                                #Work Laptop
1:110           -               -               icmp    echo-request,echo-reply
1:110           -               -               icmp    echo-reply
1:130           206.124.146.177 -               tcp     -       873,25         #Bulk Traffic
#
#                                   INCOMING TRAFFIC
#
2:110           -               206.124.146.178                          #Wookie
2:110           -               206.124.146.179                          #SNAT Responses
2:110           -               206.124.146.180                          #Work Laptop
2:130           -               206.124.146.177 tcp     25               #Incoming Email.</programlisting></para>

      <para>You can examine the installed filters with the <command>shorewall
      show filters</command> command. What follows shows the output for
      <filename class="devicefile">eth0</filename> with the filters shown
      above. <emphasis role="bold">Bold font</emphasis> are comments
      explaining the rules.<programlisting>gateway:~ # shorewall-lite show filters
Shorewall Lite 4.1.6 Clasifiers at gateway - Fri Mar 21 08:06:47 PDT 2008

Device eth1:

Device eth2:

Device eth0:
filter parent 1: protocol ip pref 10 u32 
filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 3:</emphasis> ht divisor 1 <emphasis
            role="bold">  &lt;========= Start of table 3. parses TCP header</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 3</emphasis>::800 order 2048 key ht 3 bkt 0 <emphasis
            role="bold">flowid 1:130</emphasis>  (rule hit 102 success 0)
  match 03690000/ffff0000 at nexthdr+0 (success 0 )        <emphasis
            role="bold">   &lt;========= SOURCE PORT 873 goes to class 1:130</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 2:</emphasis> ht divisor 1 <emphasis
            role="bold">  &lt;========= Start of table 2. parses ICMP header</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 2</emphasis>::800 order 2048 key ht 2 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 0 success 0)
  match 08000000/ff000000 at nexthdr+0 (success 0 )        <emphasis
            role="bold">   &lt;========= ICMP Type 8 goes to class 1:110</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 2</emphasis>::801 order 2049 key ht 2 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 0 success 0)
  match 00000000/ff000000 at nexthdr+0 (success 0 )         <emphasis
            role="bold">  &lt;========= ICMP Type 0 goes to class 1:110</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 1:</emphasis> ht divisor 1 <emphasis
            role="bold">  &lt;========= Start of table 1. parses TCP header</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 1:</emphasis>:800 order 2048 key ht 1 bkt 0 <emphasis
            role="bold">flowid 1:130</emphasis>  (rule hit 0 success 0)
  match c1210000/ffff0000 at nexthdr+0 (success 0 )         <emphasis
            role="bold">  &lt;========= SOURCE PORT 49441 goes to class 1:130</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 1</emphasis>::801 order 2049 key ht 1 bkt 0 <emphasis
            role="bold">flowid 1:130</emphasis>  (rule hit 0 success 0)
  match c1220000/ffff0000 at nexthdr+0 (success 0 )         <emphasis
            role="bold">  &lt;========= SOURCE PORT 49442 goes to class 1:130</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis> ht divisor 1 <emphasis
            role="bold">&lt;========= Start of Table 800. Packets start here!</emphasis>

   <emphasis role="bold">=============== The following 2 rules are generated by the class definition in /etc/shorewall/classes ==================</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:800 order 2048 key ht 800 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 2204 success 138)
  match 00060000/00ff0000 at 8 (success 396 )                 <emphasis
            role="bold">&lt;========= TCP   </emphasis> 
  match 05000000/0f00ffc0 at 0 (success 250 )                 <emphasis
            role="bold">&lt;========= Header length 20 and Packet Length &lt; 64</emphasis> 
  match 00100000/00ff0000 at 32 (success 138 )                <emphasis
            role="bold">&lt;========= ACK</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:801 order 2049 key ht 800 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 2066 success 0)
  match 00100000/00100000 at 0 (success 0 )                  <emphasis
            role="bold">&lt;========= Minimize-delay</emphasis><emphasis
            role="bold"> goes to class 1:110</emphasis>

   <emphasis role="bold">                     =============== Jump to Table 1 if the matches are met ==================</emphasis>
 
filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:802 order 2050 key ht 800 bkt 0 <emphasis
            role="bold">link 1:</emphasis>  (rule hit 2066 success 0)
  match ce7c92b2/ffffffff at 12 (success 1039 )              <emphasis
            role="bold">&lt;========= SOURCE 206.124.146.178 </emphasis>         
  match 00060000/00ff0000 at 8 (success 0 )                  <emphasis
            role="bold">&lt;========= PROTO TCP</emphasis>
    offset 0f00&gt;&gt;6 at 0  eat 

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:803 order 2051 key ht 800 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 2066 success 1039)
  match ce7c92b2/ffffffff at 12 (success 1039 )               <emphasis
            role="bold">&lt;========= SOURCE 206.124.146.178 goes to class 1:110</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:804 order 2052 key ht 800 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 1027 success 132)
  match ce7c92b3/ffffffff at 12 (success 132 )               <emphasis
            role="bold"> &lt;========= SOURCE 206.124.146.179 goes to class 1:110</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:805 order 2053 key ht 800 bkt 0 <emphasis
            role="bold">flowid 1:110</emphasis>  (rule hit 895 success 603)
  match ce7c92b4/ffffffff at 12 (success 603 )                <emphasis
            role="bold">&lt;========= SOURCE 206.124.146.180 goes to class 1:110</emphasis>

   <emphasis role="bold">                     =============== Jump to Table 2 if the matches are met ==================</emphasis>

filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:806 order 2054 key ht 800 bkt 0 <emphasis
            role="bold">link 2:</emphasis>  (rule hit 292 success 0)
  match 00010000/00ff0000 at 8 (success 0 )                   <emphasis
            role="bold">&lt;========= PROTO ICMP</emphasis> 
    offset 0f00&gt;&gt;6 at 0  eat

   <emphasis role="bold">                     =============== Jump to Table 3 if the matches are met ==================</emphasis>
 
filter parent 1: protocol ip pref 10 u32 <emphasis role="bold">fh 800:</emphasis>:807 order 2055 key ht 800 bkt 0 <emphasis
            role="bold">link 3:</emphasis>  (rule hit 292 success 0)
  match ce7c92b1/ffffffff at 12 (success 265 )                <emphasis
            role="bold">&lt;========= SOURCE 206.124.146.177</emphasis>
  match 00060000/00ff0000 at 8 (success 102 )                 <emphasis
            role="bold">&lt;========= PROTO TCP</emphasis>
    offset 0f00&gt;&gt;6 at 0  eat </programlisting></para>
    </section>
  </section>

  <section id="show">
    <title>Understanding the output of 'shorewall show tc'</title>

    <para>The <command>shorewall show tc</command> (<command>shorewall-lite
    show tc</command>) command displays information about the current state of
    traffic shaping. For each device, it executes the following
    commands:</para>

    <programlisting> echo Device $device:
 tc -s -d qdisc show dev $device
 echo
 tc -s -d class show dev $device
 echo </programlisting>

    <para>So, the traffic-shaping output is generated entirely by the
    <command>tc</command> utility.</para>

    <para>Here's the output of for eth0. The configuration is the one shown in
    the preceding section (the output was obtained almost 24 hours later than
    the <command>shorewall show filters</command> output shown above).</para>

    <programlisting>Device eth0:

<emphasis role="bold">       ============== The primary queuing discipline is HTB (Hierarchical Token Bucket) ==================== </emphasis>

qdisc htb 1: r2q 10 default 120 direct_packets_stat 9 ver 3.17
 Sent 2133336743 bytes 4484781 pkt (dropped 198, overlimits 4911403 requeues 21) <emphasis
        role="bold">&lt;=========== Note the overlimits and dropped counts</emphasis>
 rate 0bit 0pps backlog 0b 8p requeues 21

<emphasis role="bold">============== The ingress filter. If you specify IN-BANDWIDTH, you can see the 'dropped' count here. =========</emphasis>

                       <emphasis role="bold">In this case, the packets are being sent to the IFB for shaping</emphasis>
 
qdisc ingress ffff: ---------------- 
 Sent 4069015112 bytes 4997252 pkt (dropped 0, overlimits 0 requeues 0) 
 rate 0bit 0pps backlog 0b 0p requeues 0

 <emphasis role="bold">============ Each of the leaf HTB classes has an SFQ qdisc to ensure that each flow gets its turn ============</emphasis>
 
qdisc sfq 110: parent 1:110 limit 128p quantum 1514b flows 128/1024 perturb 10sec 
 Sent 613372519 bytes 2870225 pkt (dropped 0, overlimits 0 requeues 6) 
 rate 0bit 0pps backlog 0b 0p requeues 6 
qdisc sfq 120: parent 1:120 limit 128p quantum 1514b flows 128/1024 perturb 10sec 
 Sent 18434920 bytes 60961 pkt (dropped 0, overlimits 0 requeues 0) 
 rate 0bit 0pps backlog 0b 0p requeues 0 
qdisc sfq 130: parent 1:130 limit 128p quantum 1514b flows 128/1024 perturb 10sec 
 Sent 1501528722 bytes 1553586 pkt (dropped 198, overlimits 0 requeues 15) 
 rate 0bit 0pps backlog 11706b 8p requeues 15 

                           <emphasis role="bold">============= Class 1:110 -- the high-priority class ===========


                                   Note the rate and ceiling calculated from 'full'</emphasis>

class htb <emphasis role="bold">1:110</emphasis> parent 1:1 leaf 110: prio 1 quantum 4800 <emphasis
        role="bold">rate 192000bit ceil 384000bit</emphasis> burst 1695b/8 mpu 0b overhead 0b cburst 1791b/8 mpu 0b overhead 0b level 0 
 Sent 613372519 bytes 2870225 pkt (dropped 0, overlimits 0 requeues 0) 
 <emphasis role="bold">rate 195672bit 28pps backlog 0b 0p</emphasis> requeues 0 <emphasis
        role="bold">&lt;=========== Note the current rate of traffic. There is no queuing (no packet backlog)</emphasis> 
 lended: 2758458 borrowed: 111773 giants:
 tokens: 46263 ctokens: 35157

                                      <emphasis role="bold">============== The root class ============</emphasis>

class htb <emphasis role="bold">1:1 root</emphasis> rate 384000bit ceil 384000bit burst 1791b/8 mpu 0b overhead 0b cburst 1791b/8 mpu 0b overhead 0b level 7 
 <emphasis role="bold">Sent 2133276316 bytes 4484785 pkt</emphasis> (dropped 0, overlimits 0 requeues 0) <emphasis
        role="bold">&lt;==== Total output traffic since last 'restart'</emphasis>
 rate 363240bit 45pps backlog 0b 0p requeues 0 
 lended: 1081936 borrowed: 0 giants: 0
 tokens: -52226 ctokens: -52226

                      <emphasis role="bold">============= Bulk Class (outgoing rsync, email and bittorrent) ============</emphasis>

class htb 1:130 parent 1:1 leaf 130: prio 3 quantum 1900 rate 76000bit ceil 230000bit burst 1637b/8 mpu 0b overhead 0b cburst 1714b/8 mpu 0b overhead 0b level 0 
 Sent 1501528722 bytes 1553586 pkt (dropped 198, overlimits 0 requeues 0) 
 <emphasis role="bold">rate 162528bit 14pps backlog 0b 8p</emphasis> requeues 0 <emphasis
        role="bold">&lt;======== Queuing is occurring (8 packet backlog). The rate is still below the ceiling.</emphasis>
 lended: 587134 borrowed: 966459 giants: 0               <emphasis role="bold">During peak activity, the rate tops out at around 231000 (just above ceiling).</emphasis>
 tokens: -30919 ctokens: -97657

                       <emphasis role="bold">================= Default class (mostly serving web pages) ===============</emphasis>

class htb 1:120 parent 1:1 leaf 120: prio 2 quantum 1900 rate 76000bit ceil 230000bit burst 1637b/8 mpu 0b overhead 0b cburst 1714b/8 mpu 0b overhead 0b level 0 
 Sent 18434920 bytes 60961 pkt (dropped 0, overlimits 0 requeues 0) 
 rate 2240bit 2pps backlog 0b 0p requeues 0 
 lended: 57257 borrowed: 3704 giants: 0
 tokens: 156045 ctokens: 54178

</programlisting>
  </section>

  <section id="External">
    <title id="tcstart">Using your own tc script</title>

    <section id="owntcstart">
      <title>Replacing builtin tcstart file</title>

      <para>If you prefer your own tcstart file, just install it in
      /etc/shorewall/tcstart.</para>

      <para>In your tcstart script, when you want to run the <quote>tc</quote>
      utility, use the run_tc function supplied by Shorewall if you want tc
      errors to stop the firewall.</para>

      <orderedlist>
        <listitem>
          <para>Set TC_ENABLED=Yes and CLEAR_TC=Yes</para>
        </listitem>

        <listitem>
          <para>Supply an /etc/shorewall/tcstart script to configure your
          traffic shaping rules.</para>
        </listitem>

        <listitem>
          <para>Optionally supply an /etc/shorewall/tcclear script to stop
          traffic shaping. That is usually unnecessary.</para>
        </listitem>

        <listitem>
          <para>If your tcstart script uses the <quote>fwmark</quote>
          classifier, you can mark packets using entries in
          /etc/shorewall/tcrules.</para>
        </listitem>
      </orderedlist>
    </section>

    <section id="Start">
      <title>Traffic control outside Shorewall</title>

      <para>To start traffic shaping when you bring up your network
      interfaces, you will have to arrange for your traffic shaping
      configuration script to be run at that time. How you do that is
      distribution dependent and will not be covered here. You then
      should:</para>

      <orderedlist>
        <listitem>
          <para>Set TC_ENABLED=No and CLEAR_TC=No</para>
        </listitem>

        <listitem>
          <para>If your script uses the <quote>fwmark</quote> classifier, you
          can mark packets using entries in /etc/shorewall/tcrules.</para>
        </listitem>
      </orderedlist>
    </section>
  </section>

  <section id="Testing">
    <title>Testing Tools</title>

    <para>At least one Shorewall user has found this tool helpful: <ulink
    url="http://e2epi.internet2.edu/network-performance-toolkit.html">http://e2epi.internet2.edu/network-performance-toolkit.html</ulink></para>
  </section>
</article>