shorewall_code/Shorewall/changelog.txt

121 lines
2.4 KiB
Plaintext
Raw Normal View History

Changes in 2.5.6
1) Finish install/fallback cleanup.
2) Fix startup failure.
3) Add "-n" option.
Changes in 2.5.5
1) Zone file alchemy attempted.
2) Fix install.sh re: Makefile
3) Fix error handling.
4) Add SHOREWALL_LIBRARY function.
Changes in 2.5.4
1) Allow TAG to be used as a general parameter mechanism [hack].
2) Fix some ghastly bugs in macros.
3) "shorewall check" now checks the masq file.
4) "shorewall check" now checks the proxyarp file.
5) "shorewall check" now checks the nat file.
6) "shorewall check" now checks the providers file.
7) Merge 'tc4shorewall'
8) Modify tc4shorewall so that it plays well with Shorewall
save/restore.
Changes in 2.5.3
1) Allow exclusion lists in /etc/shorewall/tcrules.
2) Added 'openvpnserver' and 'openvpnclient' tunnel types.
3) Set COMMAND=restore in restore-base.
4) Allow exclusion lists in actions.
5) Make intra-zone policies more rational.
6) Clear the raw table on stop and [re]start
7) Section the rules file.
8) Fixed tunnels/rules interaction problems.
9) Provide hack for passing arguments to action extension scripts.
Changes in 2.5.2
1) Allow port lists in /etc/shorewall/accounting.
2) Fix PKTTYPE=No and packet type match capability reporting.
3) Add FASTACCEPT option.
4) Generate error if norfc1918 is specified on an interface with an RFC
1918 IP address.
5) Implement exclusion lists in /etc/shorewall/rules.
Changes in 2.5.1
1) Make "shorewall add" work with 'ipsec' in hosts file.
2) Remove dependence on 'which'
3) Rename "status" to "dump" and add real status command.
4) Fix Makefile (compare to restore-base rather than restarted).
5) Add "all+"
6) Don't generate redundant ACCEPT rules for DNAT/REDIRECT/SAME
7) Add FASTACCEPT option in shorewall.conf.
8) Generate error for 'norfc1918' on an interface with an RFC 1918 IP
address.
9) Finally implement exclude lists in rules.
Changes in 2.5.1ex/2.5.0
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
1) Clean up handling of zones
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
2) Make the removal of the ipsec file upward compatible.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
3) Improve CONTINUE policy handling.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
4) Implement arp_ignore support.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
Changes in 2.5.0ex
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
1) Make warning and error messages easier to find by using
capitalization.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
2) Remove /etc/shorewall/ipsec and merge it's function with
/etc/shorewall/zones.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
3) Apply small fix to the above patch.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
4) Remove dynamic zone support.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
5) Add "established policy" support.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
6) Add CRITICALHOSTS support.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
7) Remove 'bogon' stuff.
Large merge of function from EXPERIMENTAL to HEAD. 1) Elimination of the "shorewall monitor" command. 2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into a single /etc/shorewall/zones file. This is done in an upwardly-compatible way so that current users can continue to use their existing files. 3) Support has been added for the arp_ignore interface option. 4) DROPINVALID has been removed from shorewall.conf. Behavior is as if DROPINVALID=No was specified. 5) The 'nobogons' option and BOGON_LOG_LEVEL are removed. 6) Error and warning messages have been made easier to spot by using capitalization (e.g., ERROR: and WARNING:). 7) The /etc/shorewall/policy file now contains a new connection policy and a policy for ESTABLISHED packets. Useful for users of snort-inline who want to pass all packets to the QUEUE target. 8) A new 'critical' option has been added to /etc/shorewall/routestopped. Shorewall insures communication between the firewall and 'critical' hosts throughout start, restart, stop and clear. Useful for diskless firewall's with NFS-mounted file systems, LDAP servers, Crossbow, etc. 9) Macros. Macros are very similar to actions but are easier to use, allow parameter substitution and are more efficient. Almost all of the standard actions have been converted to macros in the EXPERIMENTAL branch. 10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No. 11) If you have 'make' installed on your firewall, then when you use the '-f' option to 'shorewall start' (as happens when you reboot), if your /etc/shorewall/ directory contains files that were modified after Shorewall was last restarted then Shorewall is started using the config files rather than using the saved configuration. git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-26 01:08:09 +02:00
8) Implement Macros.