shorewall_code/Shorewall-lite/shorewall-lite

#!/bin/sh
#
#     Shorewall Lite Packet Filtering Firewall Control Program - V3.3
#
#     This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
#     (c) 2006 - Tom Eastep (teastep@shorewall.net)
#
#	This file should be placed in /sbin/shorewall-lite.
#
#	Shorewall documentation is available at http://shorewall.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
#     If an error occurs while starting or restarting the firewall, the
#     firewall is automatically stopped.
#
#     Commands are:
#
#     shorewall-lite dump                          Dumps all Shorewall-related information
#                                                  for problem analysis
#     shorewall-lite start 			   Starts the firewall
#     shorewall-lite restart			   Restarts the firewall
#     shorewall-lite stop			   Stops the firewall
#     shorewall-lite status			   Displays firewall status
#     shorewall-lite reset			   Resets iptables packet and
#						   byte counts
#     shorewall-lite clear			   Open the floodgates by
#						   removing all iptables rules
#						   and setting the three permanent
#						   chain policies to ACCEPT
#     shorewall-lite show <chain> [ <chain> ... ]  Display the rules in each <chain> listed
#     shorewall-lite show log			   Print the last 20 log messages
#     shorewall-lite show connections		   Show the kernel's connection
#						   tracking table
#     shorewall-lite show nat			   Display the rules in the nat table
#     shorewall-lite show {mangle|tos}		   Display the rules in the mangle table
#     shorewall-lite show tc			   Display traffic control info
#     shorewall-lite show classifiers		   Display classifiers
#     shorewall-lite show capabilities             Display iptables/kernel capabilities
#     shorewall-lite version			   Display the installed version id
#     shorewall-lite logwatch [ refresh-interval ] Monitor the local log for Shorewall
#						   messages.
#     shorewall-lite drop <address> ...		   Temporarily drop all packets from the
#						   listed address(es)
#     shorewall-lite reject <address> ...	   Temporarily reject all packets from the
#						   listed address(es)
#     shorewall-lite allow <address> ...	   Reenable address(es) previously
#						   disabled with "drop" or "reject"
#     shorewall-lite save [ <file> ]		   Save the list of "rejected" and
#						   "dropped" addresses so that it will
#						   be automatically reinstated the
#						   next time that Shorewall starts.
#                                                  Save the current state so that 'shorewall
#                                                  restore' can be used.
#
#     shorewall-lite forget [ <file> ]             Discard the data saved by 'shorewall save'
#
#     shorewall-lite restore [ <file> ]            Restore the state of the firewall from
#                                                  previously saved information.
#
#     shorewall-lite ipaddr { <address>/<cidr> | <address> <netmask> }
#
#                                                  Displays information about the network
#                                                  defined by the argument[s]
#
#     shorewall-lite iprange <address>-<address>   Decomposes a range of IP addresses into
#                                                  a list of network/host addresses.
#
#     shorewall-lite ipdecimal { <address> | <integer> }
#
#                                                  Displays the decimal equivalent of an IP
#                                                  address and vice versa.
#
# Fatal Error
#
fatal_error() # $@ = Message
{
    echo "   $@" >&2
    exit 2
}

# Display a chain if it exists
#

showfirstchain() # $1 = name of chain
{
    awk \
    'BEGIN	 {prnt=0; rslt=1; }; \
    /^$/	 { next; };\
    /^Chain/	 {if ( prnt == 1 ) { rslt=0; exit 0; }; };\
    /Chain '$1'/ { prnt=1; }; \
		 { if (prnt == 1)  print; };\
    END		 { exit rslt; }' $TMPFILE
}

showchain() # $1 = name of chain
{
    if [ "$firstchain" = "Yes" ]; then
	if showfirstchain $1; then
	    firstchain=
	fi
    else
	awk \
	'BEGIN	     {prnt=0;};\
	/^$|^ pkts/  { next; };\
	/^Chain/     {if ( prnt == 1 ) exit; };\
	/Chain '$1'/ { prnt=1; };\
		     { if (prnt == 1)  print; }' $TMPFILE
    fi
}

#
# The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules).
#

iptablesbug()
{
    if qt mywhich awk ; then
	awk 'BEGIN           { sline=""; };\
             /^-j/           { print sline $0; next };\
             /-m policy.*-j/ { print $0; next };\
             /-m policy/     { sline=$0; next };\
             /--mask ff/     { sub( /--mask ff/, "--mask 0xff" ) };\
                             { print ; sline="" }'
    else
	echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
	cat
    fi
}

#
# Validate the value of RESTOREFILE
#
validate_restorefile() # $* = label
{
    case $RESTOREFILE in
	*/*)
	    error_message "ERROR: $@ must specify a simple file name: $RESTOREFILE"
	    exit 2
	    ;;
	.*)
	    error_message "ERROR: Reserved File Name: $RESTOREFILE"
	    exit 2
	    ;;
    esac
}

#
# Set the configuration variables from shorewall.conf
#
get_config() {

    [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin

    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages

    if [ ! -f $LOGFILE ]; then
	echo "LOGFILE ($LOGFILE) does not exist!" >&2
	exit 2
    fi
    #
    # See if we have a real version of "tail" -- use separate redirection so
    # that ash (aka /bin/sh on LRP) doesn't crap
    #
    if ( tail -n5 $LOGFILE > /dev/null 2> /dev/null ) ; then
	realtail="Yes"
    else
	realtail=""
    fi

    [ -n "$FW" ] || FW=fw

    [ -n "LOGFORMAT" ] && LOGFORMAT="${LOGFORMAT%%%*}"

    [ -n "$LOGFORMAT" ] || LOGFORMAT="Shorewall:"

    export LOGFORMAT

    if [ -n "$IPTABLES" ]; then
	if [ ! -x "$IPTABLES" ]; then
	    echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
	    exit 2
	fi
    else
	IPTABLES=$(mywhich iptables 2> /dev/null)
	if [ -z "$IPTABLES" ] ; then
	    echo "   ERROR: Can't find iptables executable" >&2
	    exit 2
	fi
    fi

    export IPTABLES

    if [ -n "$SHOREWALL_SHELL" ]; then
	if [ ! -x "$SHOREWALL_SHELL" ]; then
	    echo "   ERROR: The program specified in SHOREWALL_SHELL does not exist or is not executable" >&2
	    exit 2
	fi
    fi

    [ -n "$RESTOREFILE" ] || RESTOREFILE=restore

    validate_restorefile RESTOREFILE

    export RESTOREFILE

    [ -n "${VERBOSITY:=2}" ]

    VERBOSE=$(($VERBOSE_OFFSET + $VERBOSITY))

    export VERBOSE

}

#
# Clear descriptor 1 if it is a terminal
#
clear_term() {
    [ -t 1 ] && clear
}

#
# Delay $timeout seconds -- if we're running on a recent bash2 then allow
# <enter> to terminate the delay
#
timed_read ()
{
    read -t $timeout foo 2> /dev/null

    test $? -eq 2 && sleep $timeout
}

#
# Display the last $1 packets logged
#
packet_log() # $1 = number of messages
{
    local options

    [ -n "$realtail" ] && options="-n$1"

    if [ -n "$SHOWMACS" -o $VERBOSE -gt 2 ]; then
	grep 'IN=.* OUT=' $LOGFILE | \
	    sed s/" kernel:"// | \
	    sed s/" $host $LOGFORMAT"/" "/ | \
	    tail $options
    else
	grep 'IN=.* OUT=' $LOGFILE | \
	    sed s/" kernel:"// | \
	    sed s/" $host $LOGFORMAT"/" "/ | \
	    sed 's/MAC=.* SRC=/SRC=/' | \
	    tail $options
    fi
}

#
# Show traffic control information
#
show_tc() {

    show_one_tc() {
	local device=${1%@*}
	qdisc=$(tc qdisc list dev $device)

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s -d qdisc show dev $device
	    tc -s -d class show dev $device
	    echo
	fi
    }

    ip link list | \
    while read inx interface details; do
	case $inx in
	[0-9]*)
	    show_one_tc ${interface%:}
	    ;;
	*)
	    ;;
	esac
    done

}

#
# Show classifier information
#
show_classifiers() {

    show_one_classifier() {
	local device=${1%@*}
	qdisc=$(tc qdisc list dev $device)

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s filter ls dev $device
	    echo
	fi
    }

    ip link list | \
    while read inx interface details; do
	case $inx in
	[0-9]*)
	    show_one_classifier ${interface%:}
	    ;;
	*)
	    ;;
	esac
    done

}

#
# Watch the Firewall Log
#
logwatch() # $1 = timeout -- if negative, prompt each time that
	   #		     an 'interesting' packet count changes
{

    host=$(echo $HOSTNAME | sed 's/\..*$//')
    oldrejects=$($IPTABLES -L -v -n | grep 'LOG')

    if [ $1 -lt 0 ]; then
	timeout=$((- $1))
	pause="Yes"
    else
	pause="No"
	timeout=$1
    fi

    qt mywhich awk && haveawk=Yes || haveawk=

    while true; do
	clear_term
	echo "$banner $(date)"
	echo

	echo "Dropped/Rejected Packet Log ($LOGFILE)"
	echo

	show_reset

	rejects=$($IPTABLES -L -v -n | grep 'LOG')

	if [ "$rejects" != "$oldrejects" ]; then
	    oldrejects="$rejects"

	    $RING_BELL

	    packet_log 40

	    if [ "$pause" = "Yes" ]; then
		echo
		echo $ECHO_N 'Enter any character to continue: '
		read foo
	    else
		timed_read
	    fi
	else
	    echo
	    packet_log 40
	    timed_read
	fi
    done
}

#
# Verify that we have a compiled firewall script
#
verify_firewall_script() {
    if [ ! -f $FIREWALL ]; then
	echo "   ERROR: Shorewall Lite is not properly installed" >&2
	if [ -L $FIREWALL ]; then
	    echo "          $FIREWALL is a symbolic link to a" >&2
	    echo "          non-existant file" >&2
	else
	    echo "          The file $FIREWALL does not exist" >&2
	fi
	
	exit 2
    fi
}

#
# Save currently running configuration
#
save_config() {
    verify_firewall_script
    
    if shorewall_is_started ; then
	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}

	if [ -f $RESTOREPATH -a ! -x $RESTOREPATH ]; then
	    echo "   ERROR: $RESTOREPATH exists and is not a saved Shorewall configuration"
	else
	    case $RESTOREFILE in
		save|restore-base)
		    echo "   ERROR: Reserved file name: $RESTOREFILE"
		    ;;
		*)
		    if $IPTABLES -L dynamic -n > ${VARDIR}/save; then
			echo "   Dynamic Rules Saved"
			if [ -f ${VARDIR}/.restore ]; then
			    if iptables-save | iptablesbug > ${VARDIR}/restore-$$; then
				cp -f ${VARDIR}/.restore $RESTOREPATH
				mv -f ${VARDIR}/restore-$$ ${RESTOREPATH}-iptables
				chmod +x $RESTOREPATH
				echo "   Currently-running Configuration Saved to $RESTOREPATH"

				rm -f ${RESTOREPATH}-ipsets

				case ${SAVE_IPSETS:-No} in
				    [Yy][Ee][Ss])
					RESTOREPATH=${RESTOREPATH}-ipsets

					f=${VARDIR}/restore-$$

					echo "#!/bin/sh" > $f
					echo "#This ipset restore file generated $(date) by Shorewall $version" >> $f
					echo  >> $f
					echo ". ${SHAREDIR}/lib.base" >> $f
					echo  >> $f
					grep '^MODULE' ${VARDIR}/restore-base >>  $f
					echo "reload_kernel_modules << __EOF__" >> $f
					grep 'loadmodule ip_set' ${VARDIR}/restore-base >>  $f
					echo "__EOF__" >> $f
					echo  >> $f
					echo "ipset -U :all: :all:" >> $f
					echo "ipset -F" >> $f
					echo "ipset -X" >> $f
					echo "ipset -R << __EOF__" >> $f
					ipset -S >> $f
					echo "__EOF__" >> $f
					mv -f $f $RESTOREPATH
					chmod +x $RESTOREPATH
					echo "   Current Ipset Contents Saved to $RESTOREPATH"
					;;
				    [Nn][Oo])
					;;
				    *)
					echo "   WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS. Ipset contents not saved"
					;;
				esac
			    else
			        rm -f ${VARDIR}/restore-$$
				echo "   ERROR: Currently-running Configuration Not Saved"
			    fi
			else
			    echo "   ERROR: ${VARDIR}/.restored oes not exist"
			fi
		    else
		        echo "Error Saving the Dynamic Rules"
		    fi
		    ;;
	    esac
	fi
    else
	echo "Shorewall isn't started"
    fi

}

#
# Start Command Executor
#
start_command() {
    local finished=0

    do_it() {
	local rc=0
	[ -n "$nolock" ] || mutex_on

	if [ -x ${LITEDIR}/firewall ]; then
	    ${LITEDIR}/firewall $debugging start
	    rc=$?
	else
	    error_message "${LITEDIR}/firewall is missing or is not executable"
	    rc=2
	fi

	[ -n "$nolock" ] || mutex_off
	exit $rc
    }

    verify_firewall_script

    if shorewall_is_started; then
	error_message "Shorewall is already running"
	exit 1
    fi

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			f*)
			    FAST=Yes
			    option=${option#f}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
	0)
	    ;;
	1)
	    [ -n "$SHOREWALL_DIR" -o -n "$FAST" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$
	    export SHOREWALL_DIR
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export NOROUTES

    if [ -n "$FAST" ]; then
	if qt mywhich make; then
	    #
	    # RESTOREFILE is exported by get_config()
	    #
	    make -qf ${CONFDIR}/Makefile || FAST=
	fi

	if [ -n "$FAST" ]; then

	    RESTOREPATH=${VARDIR}/$RESTOREFILE

	    if [ -x $RESTOREPATH ]; then
		if [ -x ${RESTOREPATH}-ipsets ]; then
		    echo Restoring Ipsets...
		    #
		    # We must purge iptables to be sure that there are no
		    # references to ipsets
		    #
		    iptables -F
		    iptables -X
		    $SHOREWALL_SHELL ${RESTOREPATH}-ipsets
		fi

		echo Restoring Shorewall Lite...
		$SHOREWALL_SHELL $RESTOREPATH restore
		date > ${VARDIR}/restarted
		progress_message3 Shorewall Lite restored from $RESTOREPATH
	    else
		do_it
	    fi
	else
	    do_it
	fi
    else
	do_it
    fi
}

#
# Restart Command Executor
#
restart_command() {
    local finished=0 rc=0

    verify_firewall_script

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
	0)
	    ;;
	1)
	    [ -n "$SHOREWALL_DIR" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$1
	    export SHOREWALL_DIR
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export NOROUTES

    [ -n "$nolock" ] || mutex_on

    if [ -x ${LITEDIR}/firewall ]; then
	$SHOREWALL_SHELL ${LITEDIR}/firewall $debugging restart
	rc=$?
    else
	error_message "${LITEDIR}/firewall is missing or is not executable"
	rc=2
    fi

    [ -n "$nolock" ] || mutex_off
    return $rc
}

#
# Show Command Executor
#
show_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			x*)
			    IPT_OPTIONS="-xnv"
			    option=${option#x}
			    ;;
			m*)
			    SHOWMACS=Yes
			    option=${option#m}
			    ;;
			f*)
			    FILEMODE=Yes
			    option=${option#f}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ -n "$debugging" ] && set -x
    case "$1" in
	connections)
	    [ $# -gt 1 ] && usage 1
	    echo "Shorewall Lite $version Connections at $HOSTNAME - $(date)"
	    echo
	    cat /proc/net/ip_conntrack
	    ;;
	nat)
	    [ $# -gt 1 ] && usage 1
	    echo "Shorewall Lite $version NAT Table at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    $IPTABLES -t nat -L $IPT_OPTIONS
	    ;;
	tos|mangle)
	    [ $# -gt 1 ] && usage 1
	    echo "Shorewall Lite $version Mangle Table at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    $IPTABLES -t mangle -L $IPT_OPTIONS
	    ;;
	log)
	    [ $# -gt 1 ] && usage 1
	    echo "Shorewall Lite $version Log ($LOGFILE) at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    host=$(echo $HOSTNAME | sed 's/\..*$//')
	    packet_log 20
	    ;;
	tc)
	    [ $# -gt 1 ] && usage 1
	    echo "Shorewall Lite $version Traffic Control at $HOSTNAME - $(date)"
	    echo
	    show_tc
	    ;;
	classifiers)
	    [ $# -gt 1 ] && usage 1
	    echo "Shorewall Lite $version Clasifiers at $HOSTNAME - $(date)"
	    echo
	    show_classifiers
	    ;;
	zones)
	    [ $# -gt 1 ] && usage 1
	    if [ -f ${VARDIR}/zones ]; then
		echo "Shorewall Lite $version Zones at $HOSTNAME - $(date)"
		echo
		while read zone type hosts; do
		    echo "$zone ($type)"
		    for host in $hosts; do
			echo "   $host"
		    done
		done < ${VARDIR}/zones
		echo
	    else
		echo "   ERROR: ${VARDIR}/zones does not exist" >&2
		exit 1
	    fi
	    ;;
	capabilities)
	    [ $# -gt 1 ] && usage 1
	    determine_capabilities
	    VERBOSE=2
	    if [ -n "$FILEMODE" ]; then
		report_capabilities1
	    else
		report_capabilities
	    fi
	    ;;
	config)
	    . ${SHAREDIR}/configpath
	    echo "Default CONFIG_PATH is $CONFIG_PATH"
	    echo "LITEDIR is $LITEDIR"
	    ;;
	*)
	    echo "Shorewall Lite $version $([ $# -gt 0 ] && echo Chains || echo Chain) $* at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    if [ $# -gt 0 ]; then
		for chain in $*; do
		    $IPTABLES -L $chain $IPT_OPTIONS
		done
	    else
		$IPTABLES -L $IPT_OPTIONS
	    fi
	    ;;
    esac
}
#
# Dump Command Executor
#
dump_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			x*)
			    IPT_OPTIONS="-xnv"
			    option=${option#x}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ $VERBOSE -lt 2 ] && VERBOSE=2

    [ -n "$debugging" ] && set -x
    [ $# -eq 0 ] || usage 1
    clear_term
    echo "Shorewall Lite $version Dump at $HOSTNAME - $(date)"
    echo
    show_reset
    host=$(echo $HOSTNAME | sed 's/\..*$//')
    $IPTABLES -L $IPT_OPTIONS

    heading "Log ($LOGFILE)"
    packet_log 20

    heading "NAT Table"
    $IPTABLES -t nat -L $IPT_OPTIONS

    heading "Mangle Table"
    $IPTABLES -t mangle -L $IPT_OPTIONS

    heading "Conntrack Table"
    cat /proc/net/ip_conntrack

    heading "IP Configuration"
    ip addr ls

    heading "IP Stats"
    ip -stat link ls

    if qt mywhich brctl; then
	heading "Bridges"
	brctl show
    fi

    heading "/proc"
    show_proc /proc/version
    show_proc /proc/sys/net/ipv4/ip_forward
    show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all

    for directory in /proc/sys/net/ipv4/conf/*; do
	for file in proxy_arp arp_filter arp_ignore rp_filter log_martians; do
	    show_proc $directory/$file
	done
    done

    if [ -n "$(ip rule ls)" ]; then
	heading "Routing Rules"
	ip rule ls
	ip rule ls | while read rule; do
	    echo ${rule##* }
	done | sort -u | while read table; do
	    heading "Table $table:"
	    ip route ls table $table
	done
    else
	heading "Routing Table"
	ip route ls
    fi

    heading "ARP"
    arp -na

    if qt mywhich lsmod; then
	heading "Modules"
	lsmod | grep -E '^ip_|^ipt_|^iptable_'
    fi

    determine_capabilities
    echo
    report_capabilities

    if [ -n "$TC_ENABLED" ]; then
	heading "Traffic Control"
	show_tc
	heading "TC Filters"
	show_classifiers
	fi
}

#
# Restore Comand Executor
#
restore_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
    0)
	;;
    1)
	RESTOREFILE="$1"
	validate_restorefile '<restore file>'
	;;
    *)
	usage 1
	;;
    esac

    RESTOREPATH=${VARDIR}/$RESTOREFILE

    export NOROUTES

    [ -n "$nolock" ] || mutex_on

    if [ -x $RESTOREPATH ]; then
	if [ -x ${RESTOREPATH}-ipsets ] ; then
	    echo Restoring Ipsets...
	    iptables -F
	    iptables -X
	    $SHOREWALL_SHELL ${RESTOREPATH}-ipsets
	fi

	progress_message3 "Restoring Shorewall Lite..."
	$SHOREWALL_SHELL $RESTOREPATH restore && echo "Shorewall Lite restored from ${VARDIR}/$RESTOREFILE"
	[ -n "$nolock" ] || mutex_off
    else
	echo "File ${VARDIR}/$RESTOREFILE: file not found"
	[ -n "$nolock" ] || mutex_off
	exit 2
    fi
}
#
# Help information
#
help()
{
    [ -x $HELP ] && { export version; exec $HELP $*; }
    echo "Help subsystem is not installed at $HELP"
}

#
# Give Usage Information
#
usage() # $1 = exit status
{
    echo "Usage: $(basename $0) [debug|trace] [nolock] [ -q ] [ -v ] [ -t ] <command>"
    echo "where <command> is one of:"
    echo "   allow <address> ..."
    echo "   clear"
    echo "   drop <address> ..."
    echo "   dump [ -x ]"
    echo "   forget [ <file name> ]"
    echo "   help [ <command > | host | address ]"
    echo "   hits"
    echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
    echo "   ipdecimal { <address> | <integer> }"
    echo "   iprange <address>-<address>"
    echo "   logdrop <address> ..."
    echo "   logreject <address> ..."
    echo "   logwatch [<refresh interval>]"
    echo "   reject <address> ..."
    echo "   reset"
    echo "   restart [ -n ] [ <directory> ]"
    echo "   restore [ -n ] [ <file name> ]"
    echo "   save [ <file name> ]"
    echo "   show [ -x ] [ -m ] [ -f ] [<chain> [ <chain> ... ]|capabilities|classifiers|config|connections|log|mangle|nat|tc|zones]"
    echo "   start [ -f ] [ -n ] [ <directory> ]"
    echo "   stop"
    echo "   status"
    echo "   version"
    echo
    exit $1
}

#
# Display the time that the counters were last reset
#
show_reset() {
    [ -f ${VARDIR}/restarted ] && \
	echo "Counters reset $(cat ${VARDIR}/restarted)" && \
	echo
}

#
# Display's the passed file name followed by "=" and the file's contents.
#
show_proc() # $1 = name of a file
{
    [ -f $1 ] && echo "   $1 = $(cat $1)"
}

read_yesno_with_timeout() {
    read -t 60 yn 2> /dev/null
    if [ $? -eq 2 ]
    then
	# read doesn't support timeout
	test -x /bin/bash || return 2 # bash is not installed so the feature is not available
	/bin/bash -c 'read -t 60 yn ; if [ "$yn" == "y" ] ; then exit 0 ; else exit 1 ; fi' # invoke bash and use its version of read
	return $?
    else
	# read supports timeout
	case "$yn" in
	    y|Y)
		return 0
		;;
	    *)
		return 1
		;;
	esac
    fi
}

#
# Print a heading with leading and trailing black lines
#
heading() {
    echo
    echo "$@"
    echo
}

#
# Create the appropriate -q option to pass onward
#
make_verbose() {
    local v=$VERBOSE_OFFSET option=-

    if [ $VERBOSE_OFFSET -gt 0 ]; then
	while [ $v -gt 0 ]; do
	    option="${option}v"
	    v=$(($v - 1))
	done

	echo $option
    elif [ $VERBOSE_OFFSET -lt 0 ]; then
	while [ $v -lt 0 ]; do
	    option="${option}q"
	    v=$(($v + 1))
	done

	echo $option
    fi
}

#
# Execution begins here
#
debugging=

if [ $# -gt 0 ] && [ "$1" = "debug" -o "$1" = "trace" ]; then
    debugging=debug
    shift
fi

nolock=

if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then
    nolock=nolock
    shift
fi

SHOREWALL_DIR=
IPT_OPTIONS="-nv"
FAST=
VERBOSE_OFFSET=0
NOROUTES=
EXPORT=
export TIMESTAMP=
noroutes=

finished=0

while [ $finished -eq 0 ]; do
    [ $# -eq 0 ] && usage 1
    option=$1
    case $option in
	-)
	    finished=1
	    ;;
	-*)
	    option=${option#-}

	    [ -z "$option" ] && usage 1

	    while [ -n "$option" ]; do
		case $option in
		    c)
			[ $# -eq 1 ] && usage 1

			if [ ! -d $2 ]; then
			    if [ -e $2 ]; then
				echo "$2 is not a directory" >&2 && exit 2
			    else
				echo "Directory $2 does not exist" >&2 && exit 2
			    fi
			fi

			SHOREWALL_DIR=$2
			option=
			shift
			;;
		    e*)
			EXPORT=Yes
			option=${option#e}
			;;
		    x*)
			IPT_OPTIONS="-xnv"
			option=${option#x}
			;;
		    q*)
			VERBOSE_OFFSET=$(($VERBOSE_OFFSET - 1 ))
			option=${option#q}
			;;
		    f*)
			FAST=Yes
			option=${option#f}
			;;
		    v*)
			VERBOSE_OFFSET=$(($VERBOSE_OFFSET + 1 ))
			option=${option#v}
			;;
		    n*)
			NOROUTES=Yes
			option=${option#n}
			;;
		    t*)
			TIMESTAMP=Yes
			option=${option#t}
			;;
		    -)
			finished=1
			option=
			;;
		    *)
			usage 1
			;;
		esac
	    done
	    shift
	    ;;
	*)
	    finished=1
            ;;
    esac
done

if [ $# -eq 0 ]; then
    usage 1
fi

[ -n "$SHOREWALL_DIR" ] && export SHOREWALL_DIR
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
MUTEX_TIMEOUT=

SHAREDIR=/usr/share/shorewall-lite
VARDIR=/var/lib/shorewall-lite
CONFDIR=/etc/shorewall-lite
export PRODUCT="Shorewall Lite"

FUNCTIONS=$SHAREDIR/lib.base
VERSION_FILE=$SHAREDIR/version
HELP=$SHAREDIR/help

if [ -f $FUNCTIONS ]; then
    . $FUNCTIONS
else
    echo "$FUNCTIONS does not exist!" >&2
    exit 2
fi

ensure_config_path

config=$(find_file shorewall.conf)

if [ -f $config ]; then
    if [ -r $config ]; then
	. $config
    else
	echo "Cannot read $config! (Hint: Are you root?)" >&2
	exit 1
    fi
else
    echo "$config does not exist!" >&2
    exit 2
fi

[ -n "${LITEDIR}" -a -f ${LITEDIR}/firewall.conf ] && . ${LITEDIR}/firewall.conf

ensure_config_path
export CONFIG_PATH

[ -n "$LITEDIR" ] || { echo "   ERROR: LITEDIR not defined in ${SHAREDIR}/configpath" >&2; exit 2; }

get_config

FIREWALL=$LITEDIR/firewall

if [ -f $VERSION_FILE ]; then
    version=$(cat $VERSION_FILE)
else
    echo "   ERROR: Shorewall Lite is not properly installed" >&2
    echo "          The file $VERSION_FILE does not exist" >&2
    exit 1
fi

banner="Shorewall Lite $version Status at $HOSTNAME -"

case $(echo -e) in
    -e*)
	RING_BELL="echo \a"
	;;
    *)
	RING_BELL="echo -e \a"
	;;
esac

case $(echo -n "Testing") in
    -n*)
	ECHO_N=
	;;
    *)
	ECHO_N=-n
	;;
esac

COMMAND=$1

case "$COMMAND" in
    start)
	shift
	start_command $@
	;;
    stop|reset|clear)
	[ $# -ne 1 ] && usage 1
	verify_firewall_script
	export NOROUTES
	exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $COMMAND
	;;
    restart)
	shift
	restart_command $@
	;;
    show|list)
    	shift
    	show_command $@
	;;
    status)
	[ $# -eq 1 ] || usage 1
	echo "Shorewall Lite $version Status at $HOSTNAME - $(date)"
	echo
	if shorewall_is_started ; then
	    echo "Shorewall Lite is running"
	    status=0
	else
	    echo "Shorewall Lite is stopped"
	    status=4
	fi

	if [ -f ${VARDIR}/state ]; then
	    state="$(cat ${VARDIR}/state)"
	    case $state in
		Stopped*|Clear*)
		    status=3
		    ;;
	    esac
	else
	    state=Unknown
	fi
	echo "State:$state"
	echo
	exit $status
	;;
    dump)
    	shift
    	dump_command $@
	;;
    hits)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] || usage 1
	clear_term
	echo "Shorewall Lite $version Hits at $HOSTNAME - $(date)"
	echo

	timeout=30

	if [ $(grep -c "$LOGFORMAT" $LOGFILE ) -gt 0 ] ; then
	    echo "   HITS IP		  DATE"
	    echo "   ---- --------------- ------"
	    grep "$LOGFORMAT" $LOGFILE | sed 's/\(.\{6\}\)\(.*SRC=\)\(.*\)\( DST=.*\)/\3	\1/' | sort | uniq -c | sort -rn | \
	    while read count address month day; do
		printf '%7d %-15s %3s %2d\n' $count $address $month $day
	    done

	    echo ""

	    echo "   HITS IP		  PORT"
	    echo "   ---- --------------- -----"
	    grep "$LOGFORMAT" $LOGFILE | sed 's/\(.*SRC=\)\(.*\)\( DST=.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2	\4/
						t
						s/\(.*SRC=\)\(.*\)\( DST=.*\)/\2/' | sort | uniq -c | sort -rn | \
	    while read count address port; do
		printf '%7d %-15s %d\n' $count $address $port
	    done

	    echo ""

	    echo "   HITS DATE"
	    echo "   ---- ------"
	    grep "$LOGFORMAT" $LOGFILE | sed 's/\(.\{6\}\)\(.*\)/\1/' | sort | uniq -c | sort -rn | \
	    while read count month day; do
		printf '%7d %3s %2d\n' $count $month $day
	    done

	    echo ""

	    echo "   HITS  PORT SERVICE(S)"
	    echo "   ---- ----- ----------"
	    grep "$LOGFORMAT.*DPT" $LOGFILE | sed 's/\(.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2/' | sort | uniq -c | sort -rn | \
	    while read count port ; do
		# List all services defined for the given port
		srv=$(grep "^[^#].*\\b$port/" /etc/services | cut -f 1 | cut -f 1 -d' ' | sort -u)
		srv=$(echo $srv | sed 's/ /,/g')

		if [ -n "$srv" ] ; then
		    printf '%7d %5d %s\n' $count $port $srv
		else
		    printf '%7d %5d\n' $count $port
		fi
	    done
	fi
	;;
    version)
	echo $version Lite
	;;
    logwatch)
	shift

	finished=0

	while [ $finished -eq 0 -a $# -ne 0 ]; do
	    option=$1
	    case $option in
		-*)
		    option=${option#-}

		    [ -z "$option" ] && usage 1

		    while [ -n "$option" ]; do
			case $option in
			    v*)
				VERBOSE=$(($VERBOSE + 1 ))
				option=${option#v}
				;;
			    q*)
				VERBOSE=$(($VERBOSE - 1 ))
				option=${option#q}
				;;
			    m*)
				SHOWMACS=Yes
				option=${option#m}
				;;
			    -)
				finished=1
				option=
				;;
			    *)
				usage 1
				;;
			esac
		    done
		    shift
		    ;;
		*)
		    finished=1
		    ;;
	    esac
	done

	[ -n "$debugging" ] && set -x

	if [ $# -eq 1 ]; then
	    logwatch $1
	elif [ $# -eq 0 ]; then
	    logwatch 30
	else
	    usage 1
	fi
	;;
    drop)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	if shorewall_is_started ; then
	    mutex_on
	    while [ $# -gt 1 ]; do
		shift
		qt $IPTABLES -D dynamic -s $1 -j reject
		qt $IPTABLES -D dynamic -s $1 -j DROP
		qt $IPTABLES -D dynamic -s $1 -j logreject
		qt $IPTABLES -D dynamic -s $1 -j logdrop
		$IPTABLES -A dynamic -s $1 -j DROP || break 1
		echo "$1 Dropped"
	    done
	    mutex_off
	else
	    error_message "ERROR: Shorewall is not started"
	    exit 2
	fi
	;;
    logdrop)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	if shorewall_is_started ; then
	    mutex_on
	    while [ $# -gt 1 ]; do
		shift
		qt $IPTABLES -D dynamic -s $1 -j reject
		qt $IPTABLES -D dynamic -s $1 -j DROP
		qt $IPTABLES -D dynamic -s $1 -j logreject
		qt $IPTABLES -D dynamic -s $1 -j logdrop
		$IPTABLES -A dynamic -s $1 -j logdrop || break 1
		echo "$1 Dropped"
	    done
	    mutex_off
	else
	    error_message "ERROR: Shorewall is not started"
	    exit 2
	fi
	;;
    reject|logreject)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	if shorewall_is_started ; then
	    mutex_on
	    while [ $# -gt 1 ]; do
		shift
		qt $IPTABLES -D dynamic -s $1 -j reject
		qt $IPTABLES -D dynamic -s $1 -j DROP
		qt $IPTABLES -D dynamic -s $1 -j logreject
		qt $IPTABLES -D dynamic -s $1 -j logdrop
		$IPTABLES -A dynamic -s $1 -j $COMMAND || break 1
		echo "$1 Rejected"
	    done
	    mutex_off
	else
	    error_message "ERROR: Shorewall is not started"
	    exit 2
	fi
	;;
    allow)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	if shorewall_is_started ; then
	    mutex_on
	    while [ $# -gt 1 ]; do
		shift
		if qt $IPTABLES -D dynamic -s $1 -j reject    ||\
		   qt $IPTABLES -D dynamic -s $1 -j DROP      ||\
		   qt $IPTABLES -D dynamic -s $1 -j logdrop   ||\
		   qt $IPTABLES -D dynamic -s $1 -j logreject
		then
		    echo "$1 Allowed"
		else
		    echo "$1 Not Dropped or Rejected"
		fi
	    done
	    mutex_off
	else
	    error_message "ERROR: Shorewall is not started"
	    exit 2
	fi
	;;
    save)
	[ -n "$debugging" ] && set -x

	case $# in
	1)
	    ;;
	2)
	    RESTOREFILE="$2"
	    validate_restorefile '<restore file>'
	    ;;
	*)
	    usage 1
	    ;;
	esac

	RESTOREPATH=${VARDIR}/$RESTOREFILE

	[ "$nolock" ] || mutex_on

	save_config

	[ "$nolock" ] || mutex_off
	;;
    forget)
	case $# in
	1)
	    ;;
	2)
	    RESTOREFILE="$2"
	    validate_restorefile '<restore file>'
	    ;;
	*)
	    usage 1
	    ;;
	esac


	RESTOREPATH=${VARDIR}/$RESTOREFILE

	if [ -x $RESTOREPATH ]; then

	    if [ -x ${RESTOREPATH}-ipsets ]; then
		rm -f ${RESTOREPATH}-ipsets
		echo "    ${RESTOREPATH}-ipsets removed"
	    fi

	    rm -f $RESTOREPATH
	    rm -f ${RESTOREPATH}-iptables
	    echo "    $RESTOREPATH removed"
	elif [ -f $RESTOREPATH ]; then
	    echo "   $RESTOREPATH exists and is not a saved Shorewall configuration"
	fi
	rm -f ${VARDIR}/save
	;;
    ipcalc)
    	[ -n "$debugging" ] && set -x
	if [ $# -eq 2 ]; then
	    address=${2%/*}
	    vlsm=${2#*/}
	elif [ $# -eq 3 ]; then
	    address=$2
	    vlsm=$(ip_vlsm $3)
	else
	    usage 1
	fi

	[ -z "$vlsm" ] && exit 2
	[ "x$address" = "x$vlsm" ] && usage 2
	[ $vlsm -gt 32 ] && echo "Invalid VLSM: /$vlsm" >&2 && exit 2

	address=$address/$vlsm

	                                   echo "   CIDR=$address"
	temp=$(ip_netmask $address);       echo "   NETMASK=$(encodeaddr $temp)"
	temp=$(ip_network $address);       echo "   NETWORK=$temp"
	temp=$(broadcastaddress $address); echo "   BROADCAST=$temp"
	;;

    iprange)
	[ -n "$debugging" ] && set -x
	case $2 in
	    *.*.*.*-*.*.*.*)
		ip_range $2
		;;
	    *)
		usage 1
		;;
	esac
	;;
    ipdecimal)
	[ -n "$debugging" ] && set -x
	case $2 in
	    *.*.*.*)
		echo "   $(decodeaddr $2)"
		;;
	    *)
		echo "   $(encodeaddr $2)"
		;;
	esac
	;;
    restore)
	shift
	restore_command $@
        ;;
    call)
	[ -n "$debugging" ] && set -x
	#
	# Undocumented way to call functions in ${SHAREDIR}/functions directly
	#
	shift
	$@
	;;
    help)
	shift
	[ $# -ne 1 ] && usage 1
	help $@
	;;
    *)
	usage 1
	;;

esac