shorewall_code/Shorewall2/releasenotes.txt

Shorewall 2.0.2-Beta 1

----------------------------------------------------------------------
Problems Corrected since 2.0.1

1) The /etc/init.d/shorewall script installed on Debian by install.sh
   failed silently due to a missing file
   (/usr/share/shorewall/wait4ifup). That file is not part of the
   normal Shorewall distribution and is provided by the Debian
   maintainer.

2) A meaningless warning message out of the proxyarp file processing
   has been eliminated.

-----------------------------------------------------------------------
Issues when migrating from Shorewall 2.0.0 to Shorewall 2.0.1:

1) Dynamic Zone support.

   If you don't need to use the "shorewall add" and "shorewall delete"
   commands, you should set DYNAMIC_ZONES=No in
   /etc/shorewall/shorewall.conf.

New Features:

1) The previous implementation of dynamic zones was difficult to
   maintain. I have changed the code to make dynamic zones optional
   under the control of the DYNAMIC_ZONES option in
   /etc/shorewall/shorewall.conf.

2) In earlier Shorewall 2.0 releases, Shorewall searches in order the
   following directories for configuration files.

   a) The directory specified in a 'try' command or specified using
      the -c option.

   b) /etc/shorewall

   c) /usr/share/shorewall

   In this release, the CONFIG_PATH option is added to shorewall.conf.
   CONFIG_PATH contains a list of directory names separated by colons
   (":"). If not set or set to a null value (e.g., CONFIG_PATH="") then
   "CONFIG_PATH=/etc/shorewall:/usr/share/shorewall" is assumed.

   Now Shorewall searches for shorewall.conf according to the old
   rules and for other configuration files as follows:

   a) The directory specified in a 'try' command or specified using
      the -c option.

   b) Each directory in $CONFIG_PATH is searched in sequence.

   In case it is not obvious, your CONFIG_PATH should include
   /usr/share/shorewall and your shorewall.conf file must be in the
   directory specified via -c or in a try command, in /etc/shorewall
   or in /usr/share/shorewall.

   For distribution packagers, the default CONFIG_PATH is set in
   /usr/share/shorewall/configpath. You can customize this file to
   have a default that differs from mine.

3) Previously, in /etc/shorewall/nat a Yes (or yes) in the LOCAL column
   would only take effect if the ALL INTERFACES column also contained
   Yes or yes. Now, the LOCAL columns contents are treated
   independently of the contents of the ALL INTERFACES column.

4) The folks at Mandrake have created yet another kernel module
   naming convention (module names end in "ko.gz"). As a consequence,
   beginning with this release, if MODULE_PREFIX isn't specified in
   shorewall.conf, then the default value is "o gz ko o.gz ko.gz".

5) An updated bogons file is included in this release.

6) In /etc/shorewall/rules and in action files generated from
   /usr/share/shorewall/action.template, rules that perform logging can
   specify an optional "log tag". A log tag is a string of alphanumeric
   characters and is specified by following the log level with ":" and
   the log tag.

   Example:

	ACCEPT:info:ftp	net	dmz	tcp	21

   The log tag is appended to the log prefix generated by the LOGPREFIX
   variable in /etc/shorewall/conf. If "ACCEPT:info" generates the log
   prefix "Shorewall:net2dmz:ACCEPT:" then "ACCEPT:info:ftp" will
   generate "Shorewall:net2dmz:ACCEPT:ftp " (note the trailing blank). 
   The maximum length of a log prefix supported by iptables is 29
   characters; if a larger prefix is generated, Shorewall will issue a
   warning message and will truncate the prefix to 29 characters.

 7) A new "-q" option has been added to /sbin/shorewall commands. It
    causes the start, restart, check and refresh commands to produce
    much less output so that warning messages are more visible (when
    testing this change, I discovered a bug where a bogus warning
    message was being generated).