shorewall_code/STABLE/documentation/myfiles.htm

221 lines
18 KiB
HTML
Raw Normal View History

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252">
<title>My Shorewall Configuration</title>
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<meta name="Microsoft Theme" content="none">
</head>
<body>
<table border="0" cellpadding="0" cellspacing="0"
style="border-collapse: collapse;" width="100%" id="AutoNumber1"
bgcolor="#400169" height="90">
<tbody>
<tr>
<td width="100%">
<h1 align="center"><font color="#ffffff">About My Network</font></h1>
</td>
</tr>
</tbody>
</table>
<blockquote> </blockquote>
<h1>My Current Network </h1>
<blockquote>
<p><big><font color="#ff0000"><b>Warning 1: </b></font><b><small>I</small></b></big><big><b><small>
use a combination of Static NAT and Proxy ARP, neither of which are relevant
to a simple configuration with a single public IP address.</small></b></big><big><b><small>
If you have just a single public IP address, most of what you see here won't
apply to your setup so beware of copying parts of this configuration and
expecting them to work for you. What you copy may or may not work in your
configuration.<br>
</small></b></big></p>
<p><big><b><small><big><font color="#ff0000">Warning 2:</font></big> </small></b></big><b>My
configuration uses features introduced in Shorewall version 1.4.1.</b><br>
</p>
<p> I have DSL service and have 5 static IP addresses (206.124.146.176-180).
My DSL "modem" (<a href="http://www.fujitsu.com">Fujitsu</a> Speedport)
is connected to eth0. I have a local network connected to eth2 (subnet
192.168.1.0/24) and a DMZ connected to eth1 (192.168.2.0/24).<2E></p>
<p> I use:<br>
</p>
<ul>
<li>Static NAT for Ursa (my XP System) - Internal address
192.168.1.5 and external address 206.124.146.178.</li>
<li>Static NAT for Wookie (my Linux System). Internal address
192.168.1.3 and external address 206.124.146.179.</li>
<li>SNAT through the primary gateway address (206.124.146.176)
for<6F> my Wife's system (Tarry) and our<75> laptop (Tipper) which connects
through the Wireless Access Point (wap)</li>
</ul>
<p> The firewall runs on a 256MB PII/233 with RH8.0.</p>
<p> Wookie runs Samba and acts as the a WINS server.<2E> Wookie is in its
own 'whitelist' zone called 'me'.</p>
<p> My laptop (eastept1) is connected to eth3 using a cross-over cable.
It runs its own <a href="http://www.sygate.com"> Sygate</a> firewall
software and is managed by Proxy ARP. It connects to the local network
through a PPTP server running on Ursa. </p>
<p> The single system in the DMZ (address 206.124.146.177) runs postfix,
Courier IMAP (imaps and pop3), DNS, a Web server (Apache) and an FTP
server (Pure-ftpd). The system also runs fetchmail to fetch our email
from our old and current ISPs. That server is managed through Proxy ARP.</p>
<p> The firewall system itself runs a DHCP server that serves the local
network.</p>
<p> All administration and publishing is done using ssh/scp. I have X installed
on both the firewall and the server but no X server or desktop is installed.
X applications tunnel through SSH to XWin.exe running on Ursa.</p>
<p> I run an SNMP server on my firewall to serve <a
href="http://www.ee.ethz.ch/%7Eoetiker/webtools/mrtg/"> MRTG</a> running
in the DMZ.</p>
<p align="center"> <img border="0"
src="images/network.png" width="764" height="846">
</p>
<p><EFBFBD></p>
<p>The ethernet interface in the Server is configured with IP address
206.124.146.177, netmask 255.255.255.0. The server's default gateway is
206.124.146.254 (Router at my ISP. This is the same default
gateway used by the firewall itself). On the firewall,
Shorewall automatically adds a host route to
206.124.146.177 through eth1 (192.168.2.1) because of
the entry in /etc/shorewall/proxyarp (see below).</p>
<p>A similar setup is used on eth3 (192.168.3.1) which interfaces
to my laptop (206.124.146.180).<br>
</p>
<p>Ursa (192.168.1.5 AKA 206.124.146.178) runs a PPTP server for Road Warrior
access.<br>
</p>
<p><font color="#ff0000" size="5"></font></p>
</blockquote>
<h3>Shorewall.conf</h3>
<blockquote>
<pre>SHARED_DIR=/usr/share/shorewall<br>LOGFILE=/var/log/firewall<br>LOGRATE=<br>LOGBURST=<br>LOGUNCLEAN=info<br>BLACKLIST_LOGLEVEL=<br>LOGNEWNOTSYN=<br>MACLIST_LOG_LEVEL=$LOG<br>TCP_FLAGS_LOG_LEVEL=$LOG<br>RFC1918_LOG_LEVEL=$LOG<br>PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin<br>SUBSYSLOCK=/var/lock/subsys/shorewall<br>STATEDIR=/var/state/shorewall<br>MODULESDIR=<br>FW=fw<br>NAT_ENABLED=Yes<br>MANGLE_ENABLED=Yes<br>IP_FORWARDING=On<br>ADD_IP_ALIASES=Yes<br>ADD_SNAT_ALIASES=Yes<br>TC_ENABLED=Yes<br>CLEAR_TC=No<br>MARK_IN_FORWARD_CHAIN=No<br>CLAMPMSS=Yes<br>ROUTE_FILTER=No<br>NAT_BEFORE_RULES=No<br>MULTIPORT=Yes<br>DETECT_DNAT_IPADDRS=Yes<br>MUTEX_TIMEOUT=60<br>NEWNOTSYN=Yes<br>BLACKLIST_DISPOSITION=DROP<br>MACLIST_DISPOSITION=REJECT<br>TCP_FLAGS_DISPOSITION=DROP</pre>
</blockquote>
<h4> </h4>
<h3>Params File (Edited):</h3>
<blockquote>
<pre>MIRRORS=<i>&lt;list of shorewall mirror ip addresses&gt;</i><br>NTPSERVERS=<i>&lt;list of the NTP servers I sync with&gt;</i>
TEXAS=<i>&lt;ip address of gateway in Dallas&gt;<br></i>LOG=ULOG<br></pre>
</blockquote>
<h3>Zones File</h3>
<blockquote>
<pre>#ZONE DISPLAY COMMENTS<br>net Internet Internet<br>me Wookie My Linux Workstation<br>dmz DMZ Demilitarized zone<br>loc Local Local networks<br>tx Texas Peer Network in Dallas<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE<font
face="Courier" size="2"><br></font></pre>
</blockquote>
<h3>Interfaces File: </h3>
<blockquote>
<p> This is set up so that I can start the firewall before bringing up
my Ethernet interfaces. </p>
</blockquote>
<blockquote>
<pre>#ZONE INERFACE BROADCAST OPTIONS<br>net eth0 206.124.146.255 dhcp,norfc1918,routefilter,blacklist,tcpflags<br>loc eth2 192.168.1.255 dhcp,maclist<br>dmz eth1 192.168.2.255<br>net eth3 206.124.146.255<br>- texas 192.168.9.255<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE<font
face="Courier" size="2"><br></font> </pre>
</blockquote>
<h3>Hosts File: </h3>
<blockquote>
<pre>#ZONE HOST(S) OPTIONS<br>me<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> eth2:192.168.1.3<br>tx<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> texas:192.168.8.0/22<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</pre>
</blockquote>
<h3>Routestopped File:</h3>
<blockquote>
<pre>#INTERFACQ HOST(S)<br>eth1 206.124.146.177<br>eth2 -<br>eth3 206.124.146.180<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE<font
face="Courier" size="2"> </font></pre>
</blockquote>
<h3>Policy File:</h3>
<blockquote>
<pre>#SOURCE DESTINATION POLICY LOG LEVEL BURST:LIMIT<br>me loc NONE<br>loc me NONE<br>me all ACCEPT<br>tx me ACCEPT<br>all me CONTINUE - 2/sec:5<br>loc net ACCEPT<br>$FW loc ACCEPT<br>$FW tx ACCEPT<br>loc tx ACCEPT<br>loc fw REJECT $LOG<br>net all DROP $LOG 10/sec:40<br>all all REJECT $LOG<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE<br></pre>
</blockquote>
<h3>Masq File: </h3>
<blockquote>
<p> Although most of our internal systems use static NAT, my wife's system
(192.168.1.4) uses IP Masquerading (actually SNAT) as do visitors with
laptops. Also, I masquerade wookie to the peer subnet in Texas.</p>
</blockquote>
<blockquote>
<pre>#INTERFACE SUBNET ADDRESS<br>eth0:0.0.0.0/0 eth2 206.124.146.176<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE<br><font
size="2" face="Courier"> </font></pre>
</blockquote>
<h3>NAT File: </h3>
<blockquote>
<pre>#EXTERNAL INTERFACE INTERNAL ALL INTERFACES LOCAL<br>206.124.146.178 eth0:0 192.168.1.5 No No<br>206.124.146.179 eth0:1 192.168.1.3 No No<br>192.168.1.193 eth2:0 206.124.146.177 No No<br>#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE<font
size="2" face="Courier"></font></pre>
</blockquote>
<h3>Proxy ARP File:</h3>
<blockquote>
<pre>#ADDRESS INTERFACE EXTERNAL HAVEROUTE<br>206.124.146.177 eth1 eth0 No<br>206.124.146.180 eth3 eth0 No<br>#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE<font
face="Courier" size="2"> </font></pre>
</blockquote>
<h3>Tunnels File (Shell variable TEXAS set in /etc/shorewall/params):</h3>
<blockquote>
<pre>#TYPE ZONE GATEWAY GATEWAY ZONE PORT<br>gre net $TEXAS<br>#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE<br><small> </small></pre>
</blockquote>
<h3>Common File:</h3>
<blockquote>
<pre>. /etc/shorewall/common.def<br>run_iptables -A common -p tcp --dport auth -j REJECT<br></pre>
</blockquote>
<h3>Rules File (The shell variables are set in /etc/shorewall/params):</h3>
<blockquote>
<pre>################################################################################################################################################################<br>#RESULT CLIENT(S) SERVER(S) PROTO PORT(S) CLIENT ORIGINAL DEST:SNAT<br>################################################################################################################################################################<br># Local Network to Internet - Reject attempts by Trojans to call home<br>#<br>REJECT:$LOG loc net tcp 6667<br>#<br># Stop NETBIOS crap since our policy is ACCEPT<br>#<br>REJECT loc net tcp 137,445<br>REJECT loc net udp 137:139<br>LOG:$LOG loc net tcp 137:139<br>################################################################################################################################################################<br># Local Network to Firewall<br>#<br>ACCEPT loc fw tcp ssh,time,10000<br>ACCEPT loc fw udp snmp<br>ACCEPT loc fw udp ntp<br>################################################################################################################################################################<br># Local Network to DMZ (10027 is our SMTP backdoor that bypasses virus/spam filtering)<br>#<br>ACCEPT loc dmz udp domain<br>ACCEPT loc dmz tcp smtp,domain,ssh,imap,https,imaps,cvspserver,www,ftp,10027,10000,8080 -<br>################################################################################################################################################################<br># Internet to DMZ<br>#<br>ACCEPT net dmz tcp www,smtp,ftp,imaps,domain,cvspserver,https,imap -<br>ACCEPT net dmz udp domain<br>ACCEPT net:$MIRRORS dmz tcp rsync<br>ACCEPT:$LOG net dmz tcp 32768:61000 20<br>DROP net dmz tcp 1433<br>################################################################################################################################################################<br>#<br># Net to Local<br>#<br># My laptop isn't NATTED when in its docking station. To allow access to the local lan, I need a VPN to Ursa which is enabled by the following "half"-rules.<br>#<br>DNAT- net loc:192.168.1.5 tcp 1723 - 206.124.146.178<br>DNAT- net loc:192.168.1.5 gre - - 206.124.146.178<br>#<br># When I'm "on the road", the following two rules allow me VPN access back home.<br>#<br>ACCEPT net loc:192.168.1.5 tcp 1723<br>ACCEPT net loc:192.168.1.5 gre<br>#<br># ICQ to Ursa<br>#<br>ACCEPT net loc:192.168.1.5 tcp 4000:4100<br>################################################################################################################################################################<br># Net to me<br>#<br>ACCEPT net me:192.168.1.3 tcp 4000:4100<br>###################################################################################
</blockquote>
<p><font size="2"><a href="support.htm">Tom Eastep</a></font> </p>
<a href="copyright.htm"><font size="2">Copyright</font>
<EFBFBD> <font size="2">2001, 2002, 2003 Thomas M. Eastep.</font></a><br>
</body>
</html>