2002-09-30 20:11:25 +02:00
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
2002-08-07 16:28:04 +02:00
< html >
< head >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< meta http-equiv = "Content-Language" content = "en-us" >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< meta name = "GENERATOR" content = "Microsoft FrontPage 5.0" >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< meta name = "ProgId" content = "FrontPage.Editor.Document" >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< meta http-equiv = "Content-Type"
content="text/html; charset=windows-1252">
< title > Shorewall Setup Guide< / title >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< meta name = "Microsoft Theme" content = "none" >
2002-08-07 16:28:04 +02:00
< / head >
2002-09-30 20:11:25 +02:00
< body >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< h1 align = "center" > Shorewall Setup Guide< / h1 >
2003-06-23 22:24:51 +02:00
2002-08-07 16:28:04 +02:00
< p > < a href = "#Introduction" > 1.0 Introduction< / a > < br >
2003-06-23 22:24:51 +02:00
< a href = "#Concepts" > 2.0 Shorewall Concepts< / a > < br >
< a href = "#Interfaces" > 3.0 Network Interfaces< / a > < br >
< a href = "#Addressing" > 4.0 Addressing, Subnets and Routing< / a > < / p >
< blockquote >
2002-09-30 20:11:25 +02:00
< p > < a href = "#Addresses" > 4.1 IP Addresses< / a > < br >
2003-06-23 22:24:51 +02:00
< a href = "#Subnets" > 4.2 Subnets< / a > < br >
< a href = "#Routing" > 4.3 Routing< / a > < br >
< a href = "#ARP" > 4.4 Address Resolution Protocol (ARP)< / a > < br >
< a href = "#RFC1918" > 4.5 RFC 1918< / a > < / p >
< / blockquote >
2002-08-07 16:28:04 +02:00
< p > < a href = "#Options" > 5.0 Setting up your Network< / a > < / p >
2003-06-23 22:24:51 +02:00
< blockquote >
2002-09-30 20:11:25 +02:00
< p > < a href = "#Routed" > 5.1 Routed< / a > < br >
2003-06-23 22:24:51 +02:00
< a href = "#NonRouted" > 5.2 Non-routed< / a > < / p >
< blockquote >
2002-09-30 20:11:25 +02:00
< p > < a href = "#SNAT" > 5.2.1 SNAT< / a > < br >
2003-06-23 22:24:51 +02:00
< a href = "#DNAT" > 5.2.2 DNAT< / a > < br >
< a href = "#ProxyARP" > 5.2.3 Proxy ARP< / a > < br >
< a href = "#NAT" > 5.2.4 Static NAT< / a > < / p >
< / blockquote >
2003-01-14 21:32:45 +01:00
< p > < a href = "#Rules" > 5.3 Rules< / a > < br >
2003-06-23 22:24:51 +02:00
< a href = "#OddsAndEnds" > 5.4 Odds and Ends< / a > < / p >
< / blockquote >
2002-08-07 16:28:04 +02:00
< p > < a href = "#DNS" > 6.0 DNS< / a > < br >
2003-06-23 22:24:51 +02:00
< a href = "#StartingAndStopping" > 7.0 Starting and Stopping the
Firewall< / a > < / p >
2002-08-22 23:33:54 +02:00
< h2 > < a name = "Introduction" > < / a > 1.0 Introduction< / h2 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > This guide is intended for users who are setting up Shorewall in an environment
2003-06-23 22:24:51 +02:00
where a set of public IP addresses must be managed or who want to know
more about Shorewall than is contained in the < a
2003-05-18 20:38:34 +02:00
href="shorewall_quickstart_guide.htm">single-address guides< / a > . Because
2003-06-23 22:24:51 +02:00
the range of possible applications is so broad, the Guide will give
you general guidelines and will point you to other resources as necessary.< / p >
2002-09-30 20:11:25 +02:00
< p > < img border = "0" src = "images/j0213519.gif" width = "60" height = "60" >
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> If you run LEAF Bering, your Shorewall configuration is
NOT what I release -- I suggest that you consider installing a stock
Shorewall lrp from the shorewall.net site before you proceed.< / p >
2003-05-18 20:38:34 +02:00
< p > Shorewall requires that the iproute/iproute2 package be installed (on
2003-06-23 22:24:51 +02:00
RedHat, the package is called < i > iproute< / i > )< i > . < / i > You can tell if
this package is installed by the presence of an < b > ip< / b > program on your
firewall system. As root, you can use the 'which' command to check for
this program:< / p >
2002-09-30 20:11:25 +02:00
< pre > [root@gateway root]# which ip< br > /sbin/ip< br > [root@gateway root]#< / pre >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > I recommend that you first read through the guide to familiarize yourself
2003-06-23 22:24:51 +02:00
with what's involved then go back through it again making your configuration
changes. Points at which configuration changes are recommended are flagged
with < img border = "0" src = "images/BD21298_.gif" width = "13"
2003-03-23 19:47:54 +01:00
height="13">
2003-06-23 22:24:51 +02:00
.< / p >
2002-09-30 20:11:25 +02:00
< p > < img border = "0" src = "images/j0213519.gif" width = "60" height = "60" >
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> If you edit your configuration files on a Windows system,
you must save them as Unix files if your editor supports that option
2003-05-18 20:38:34 +02:00
or you must run them through dos2unix before trying to use them with Shorewall.
2003-06-23 22:24:51 +02:00
Similarly, if you copy a configuration file from your Windows hard drive
to a floppy disk, you must run dos2unix against the copy before using
it with Shorewall.< / p >
2002-08-22 23:33:54 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li > < a href = "http://www.simtel.net/pub/pd/51438.html" > Windows
Version of dos2unix< / a > < / li >
< li > < a
2003-05-18 20:38:34 +02:00
href="http://www.megaloman.com/%7Ehany/software/hd2u/">Linux Version
of dos2unix< / a > < / li >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< h2 align = "left" > < a name = "Concepts" > < / a > 2.0 Shorewall Concepts< / h2 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > The configuration files for Shorewall are contained in the directory /etc/shorewall
2003-06-23 22:24:51 +02:00
-- for most setups, you will only need to deal with a few of these as described
in this guide. Skeleton files are created during the < a
2003-05-18 20:38:34 +02:00
href="Install.htm">Shorewall Installation Process< / a > .< / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > As each file is introduced, I suggest that you look through the actual
2003-06-23 22:24:51 +02:00
file on your system -- each file contains detailed configuration instructions
and some contain default entries.< / p >
2003-05-18 20:38:34 +02:00
< p > Shorewall views the network where it is running as being composed of a
2003-06-23 22:24:51 +02:00
set of < i > zones.< / i > In the default installation, the following zone
names are used:< / p >
2002-09-30 20:11:25 +02:00
< table border = "0" style = "border-collapse: collapse;" cellpadding = "3"
cellspacing="0" id="AutoNumber2">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > Name< / b > < / u > < / td >
< td > < u > < b > Description< / b > < / u > < / td >
< / tr >
< tr >
< td > < b > net< / b > < / td >
< td > < b > The Internet< / b > < / td >
< / tr >
< tr >
< td > < b > loc< / b > < / td >
< td > < b > Your Local Network< / b > < / td >
< / tr >
< tr >
< td > < b > dmz< / b > < / td >
< td > < b > Demilitarized Zone< / b > < / td >
< / tr >
< / tbody >
2002-09-30 20:11:25 +02:00
< / table >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > Zones are defined in the < a href = "Documentation.htm#Zones" > /etc/shorewall/zones< / a >
2003-06-23 22:24:51 +02:00
file.< / p >
2003-05-18 20:38:34 +02:00
< p > Shorewall also recognizes the firewall system as its own zone - by default,
2003-06-23 22:24:51 +02:00
the firewall itself is known as < b > fw< / b > but that may be changed in
the < a href = "Documentation.htm#Configs" > /etc/shorewall/shorewall.conf< / a >
file. In this guide, the default name (< b > fw< / b > ) will be used.< / p >
2003-05-18 20:38:34 +02:00
< p > With the exception of < b > fw< / b > , Shorewall attaches absolutely no meaning
2003-06-23 22:24:51 +02:00
to zone names. Zones are entirely what YOU make of them. That means
that you should not expect Shorewall to do something special "because
this is the internet zone" or "because that is the DMZ".< / p >
2002-09-30 20:11:25 +02:00
< p > < img border = "0" src = "images/BD21298_.gif" width = "13" height = "13" >
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> Edit the /etc/shorewall/zones file and make any changes
necessary.< / p >
2003-05-18 20:38:34 +02:00
< p > Rules about what traffic to allow and what traffic to deny are expressed
2003-06-23 22:24:51 +02:00
in terms of zones.< / p >
2002-08-22 23:33:54 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li > You express your default policy for connections from one
zone to another zone in the< a href = "Documentation.htm#Policy" > /etc/shorewall/policy
< / a > file.< / li >
< li > You define exceptions to those default policies in the
< a href = "Documentation.htm#Rules" > /etc/shorewall/rules < / a > file.< / li >
2002-08-22 23:33:54 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > Shorewall is built on top of the < a href = "http://www.netfilter.org" > Netfilter< / a >
2003-06-23 22:24:51 +02:00
kernel facility. Netfilter implements a < a
2003-05-18 20:38:34 +02:00
href="http://www.cs.princeton.edu/%7Ejns/security/iptables/iptables_conntrack.html">connection
2003-06-23 22:24:51 +02:00
tracking function< / a > that allows what is often referred to as < i > stateful
inspection< / i > of packets. This stateful property allows firewall rules
to be defined in terms of < i > connections< / i > rather than in terms
of packets. With Shorewall, you:< / p >
2002-09-30 20:11:25 +02:00
< ol >
2003-06-23 22:24:51 +02:00
< li > Identify the source zone.< / li >
< li > Identify the destination zone.< / li >
< li > If the POLICY from the client's zone to the server's
zone is what you want for this client/server pair, you need do
nothing further.< / li >
< li > If the POLICY is not what you want, then you must
add a rule. That rule is expressed in terms of the client's zone
and the server's zone.< / li >
2002-09-30 20:11:25 +02:00
< / ol >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p > Just because connections of a particular type are allowed from zone
A to the firewall and are also allowed from the firewall to zone B < font
color="#ff6633">< b > < u > DOES NOT mean that these connections are allowed
2003-06-23 22:24:51 +02:00
from zone A to zone B< / u > < / b > < / font > . It rather means that you can
have a proxy running on the firewall that accepts a connection from
zone A and then establishes its own separate connection from the firewall
to zone B.< / p >
2003-05-18 20:38:34 +02:00
< p > For each connection request entering the firewall, the request is first
2003-06-23 22:24:51 +02:00
checked against the /etc/shorewall/rules file. If no rule in that file
matches the connection request then the first policy in /etc/shorewall/policy
that matches the request is applied. If that policy is REJECT or DROP<4F>
the request is first checked against the rules in /etc/shorewall/common.def.< / p >
2002-09-30 20:11:25 +02:00
< p > The default /etc/shorewall/policy file has the following policies:< / p >
2003-06-23 22:24:51 +02:00
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber3">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > Source Zone< / b > < / u > < / td >
< td > < u > < b > Destination Zone< / b > < / u > < / td >
< td > < u > < b > Policy< / b > < / u > < / td >
< td > < u > < b > Log Level< / b > < / u > < / td >
< td > < u > < b > Limit:Burst< / b > < / u > < / td >
< / tr >
< tr >
< td > loc< / td >
< td > net< / td >
< td > ACCEPT< / td >
< td > <EFBFBD> < / td >
< td > <EFBFBD> < / td >
< / tr >
< tr >
< td > net< / td >
< td > all< / td >
< td > DROP< / td >
< td > info< / td >
< td > <EFBFBD> < / td >
< / tr >
< tr >
< td > all< / td >
< td > all< / td >
< td > REJECT< / td >
< td > info< / td >
< td > <EFBFBD> < / td >
< / tr >
< / tbody >
2002-08-22 23:33:54 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
2002-08-07 16:28:04 +02:00
< p > The above policy will:< / p >
2003-06-23 22:24:51 +02:00
2002-08-07 16:28:04 +02:00
< ol >
2003-06-23 22:24:51 +02:00
< li > allow all connection requests from your local network
to the internet< / li >
< li > drop (ignore) all connection requests from the internet
to your firewall or local network and log a message at the < i > info< / i >
level (< a href = "shorewall_logging.html" > here< / a > is a description of log
levels).< / li >
< li > reject all other connection requests and log a message
at the < i > info< / i > level. When a request is rejected, the firewall
will return an RST (if the protocol is TCP) or an ICMP port-unreachable
packet for other protocols.< / li >
2002-08-07 16:28:04 +02:00
< / ol >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< p > < img border = "0" src = "images/BD21298_.gif" width = "13" height = "13" >
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> At this point, edit your /etc/shorewall/policy and make any
changes that you wish.< / p >
2002-08-22 23:33:54 +02:00
< h2 align = "left" > < a name = "Interfaces" > < / a > 3.0 Network Interfaces< / h2 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > For the remainder of this guide, we'll refer to the following
2003-06-23 22:24:51 +02:00
diagram. While it may not look like your own network, it can be used
to illustrate the important aspects of Shorewall configuration.< / p >
2002-08-07 16:28:04 +02:00
< p align = "left" > In this diagram:< / p >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li > The DMZ Zone consists of systems DMZ 1 and DMZ 2. A DMZ
is used to isolate your internet-accessible servers from your local
2003-05-18 20:38:34 +02:00
systems so that if one of those servers is compromised, you still have
the firewall between the compromised system and your local systems. < / li >
2003-06-23 22:24:51 +02:00
< li > The Local Zone consists of systems Local 1, Local 2 and
Local 3. < / li >
< li > All systems from the ISP outward comprise the Internet
Zone. < / li >
2002-08-22 23:33:54 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< p align = "center" > < img border = "0" src = "images/dmz3.png" width = "692"
height="635">
2003-06-23 22:24:51 +02:00
< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > The simplest way to define zones is to simply associate the
2003-06-23 22:24:51 +02:00
zone name (previously defined in /etc/shorewall/zones) with a network
interface. This is done in the < a
2003-03-23 19:47:54 +01:00
href="Documentation.htm#Interfaces">/etc/shorewall/interfaces< / a > file.< / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > The firewall illustrated above has three network interfaces.
2003-06-23 22:24:51 +02:00
Where Internet connectivity is through a cable or DSL "Modem", the < i > External
Interface< / i > will be the Ethernet adapter that is connected to that
"Modem" (e.g., < b > eth0< / b > )<29> < u > unless< / u > you connect via < i > < u > P< / u > oint-to-< u > P< / u > oint
< u > P< / u > rotocol over < u > E< / u > thernet< / i > (PPPoE) or < i > < u > P< / u > oint-to-< u > P< / u > oint
< u > T< / u > unneling < u > P< / u > rotocol < / i > (PPTP) in which case the External
Interface will be a ppp interface (e.g., < b > ppp0< / b > ). If you connect
via a regular modem, your External Interface will also be < b > ppp0< / b > .
If you connect using ISDN, you external interface will be < b > ippp0.< / b > < / p >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_1.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> If your external interface is < b > ppp0< / b > or < b > ippp0 < / b > then
you will want to set CLAMPMSS=yes in < a
2003-03-18 16:16:33 +01:00
href="Documentation.htm#Conf"> /etc/shorewall/shorewall.conf.< / a > < / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > Your < i > Local Interface< / i > will be an Ethernet adapter (eth0,
2003-06-23 22:24:51 +02:00
eth1 or eth2) and will be connected to a hub or switch. Your local computers
will be connected to the same switch (note: If you have only a single
local system, you can connect the firewall directly to the computer
using a < i > cross-over < / i > cable).< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > Your < i > DMZ Interface< / i > will also be an Ethernet adapter
2003-06-23 22:24:51 +02:00
(eth0, eth1 or eth2) and will be connected to a hub or switch. Your
DMZ computers will be connected to the same switch (note: If you have
only a single DMZ system, you can connect the firewall directly to the
computer using a < i > cross-over < / i > cable).< / p >
2002-09-30 20:11:25 +02:00
< p align = "left" > < u > < b > < img border = "0" src = "images/j0213519.gif"
width="60" height="60">
2003-06-23 22:24:51 +02:00
< / b > < / u > Do not connect more than one interface to the same hub
or switch (even for testing). It won't work the way that you expect
it to and you will end up confused and believing that Linux networking
doesn't work at all.< / p >
2002-08-07 16:28:04 +02:00
< p align = "left" > For the remainder of this Guide, we will assume that:< / p >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li >
2002-09-30 20:11:25 +02:00
< p align = "left" > The external interface is < b > eth0< / b > .< / p >
2003-06-23 22:24:51 +02:00
< / li >
< li >
2002-09-30 20:11:25 +02:00
< p align = "left" > The Local interface is < b > eth1< / b > .< / p >
2003-06-23 22:24:51 +02:00
< / li >
< li >
2002-09-30 20:11:25 +02:00
< p align = "left" > The DMZ interface is < b > eth2< / b > .< / p >
2003-06-23 22:24:51 +02:00
< / li >
2002-08-22 23:33:54 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > The Shorewall default configuration does not define the contents
2003-06-23 22:24:51 +02:00
of any zone. To define the above configuration using the /etc/shorewall/interfaces
file, that file would might contain:< / p >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber4">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > Zone< / b > < / u > < / td >
< td > < u > < b > Interface< / b > < / u > < / td >
< td > < u > < b > Broadcast< / b > < / u > < / td >
< td > < u > < b > Options< / b > < / u > < / td >
< / tr >
< tr >
< td > net< / td >
< td > eth0< / td >
< td > detect< / td >
< td > norfc1918< / td >
< / tr >
< tr >
< td > loc< / td >
< td > eth1< / td >
< td > detect< / td >
< td > <EFBFBD> < / td >
< / tr >
< tr >
< td > dmz< / td >
< td > eth2< / td >
< td > detect< / td >
< td > <EFBFBD> < / td >
< / tr >
< / tbody >
2002-08-22 23:33:54 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_2.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> Edit the /etc/shorewall/interfaces file and define the network
interfaces on your firewall and associate each interface with a zone.
If you have a zone that is interfaced through more than one interface,
simply include one entry for each interface and repeat the zone name as
many times as necessary.< / p >
2002-08-07 16:28:04 +02:00
< p align = "left" > Example:< / p >
2003-05-18 20:38:34 +02:00
2003-06-23 22:24:51 +02:00
< blockquote >
2003-03-23 19:47:54 +01:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
2003-06-23 22:24:51 +02:00
id="AutoNumber4">
2003-05-18 20:38:34 +02:00
< tbody >
2003-06-23 22:24:51 +02:00
< tr >
< td > < u > < b > Zone< / b > < / u > < / td >
< td > < u > < b > Interface< / b > < / u > < / td >
< td > < u > < b > Broadcast< / b > < / u > < / td >
< td > < u > < b > Options< / b > < / u > < / td >
< / tr >
< tr >
< td > net< / td >
< td > eth0< / td >
< td > detect< / td >
< td > norfc1918< / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > loc< / td >
2003-06-23 22:24:51 +02:00
< td > eth1< / td >
< td > detect< / td >
2003-05-18 20:38:34 +02:00
< td > <EFBFBD> < / td >
< / tr >
2003-06-23 22:24:51 +02:00
< tr >
< td > loc< / td >
< td > eth2< / td >
< td > detect< / td >
< td > dhcp< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-05-18 20:38:34 +02:00
< / blockquote >
2003-06-23 22:24:51 +02:00
< div align = "left" >
< p align = "left" > When you have more than one interface to a zone, you will
usually want a policy that permits intra-zone traffic:< / p >
< / div >
< div align = "left" >
< blockquote >
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber3">
< tbody >
< tr >
< td > < u > < b > Source Zone< / b > < / u > < / td >
< td > < u > < b > Destination Zone< / b > < / u > < / td >
< td > < u > < b > Policy< / b > < / u > < / td >
< td > < u > < b > Log Level< / b > < / u > < / td >
< td > < u > < b > Limit:Burst< / b > < / u > < / td >
< / tr >
< tr >
< td > loc< / td >
< td > loc< / td >
< td > ACCEPT< / td >
< td > <EFBFBD> < / td >
< td > <EFBFBD> < / td >
< / tr >
< / tbody >
< / table >
< / blockquote >
< / div >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_2.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> You may define more complicated zones using the < a
2003-05-18 20:38:34 +02:00
href="Documentation.htm#Hosts">/etc/shorewall/hosts< / a > file but in most
2003-06-23 22:24:51 +02:00
cases, that isn't necessary.< / p >
2002-08-22 23:33:54 +02:00
< h2 align = "left" > < a name = "Addressing" > < / a > 4.0 Addressing, Subnets and Routing< / h2 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > Normally, your ISP will assign you a set of < i > Public< / i >
2003-06-23 22:24:51 +02:00
IP addresses. You will configure your firewall's external interface to
use one of those addresses permanently and you will then have to decide
how you are going to use the rest of your addresses. Before we tackle
2003-05-18 20:38:34 +02:00
that question though, some background is in order.< / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > If you are thoroughly familiar with IP addressing and routing,
2003-06-23 22:24:51 +02:00
you may < a href = "#Options" > go to the next section< / a > .< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > The following discussion barely scratches the surface of
addressing and routing. If you are interested in learning more about this
subject, I highly recommend < i > "IP Fundamentals: What Everyone Needs to
Know about Addressing & Routing",< / i > Thomas A. Maufer, Prentice-Hall,
1999, ISBN 0-13-975483-0.< / p >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< h3 align = "left" > < a name = "Addresses" > < / a > 4.1 IP Addresses< / h3 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > IP version 4 (< i > IPv4) < / i > addresses are 32-bit numbers.
2003-06-23 22:24:51 +02:00
The notation w.x.y.z refers to an address where the high-order byte has
value "w", the next byte has value "x", etc. If we take the address 192.0.2.14
and express it in hexadecimal, we get:< / p >
< blockquote >
2002-08-07 16:28:04 +02:00
< p align = "left" > C0.00.02.0E< / p >
2003-06-23 22:24:51 +02:00
< / blockquote >
2002-08-07 16:28:04 +02:00
< p align = "left" > or looking at it as a 32-bit integer< / p >
2003-06-23 22:24:51 +02:00
< blockquote >
2003-02-14 22:27:03 +01:00
< p align = "left" > C000020E< / p >
2003-06-23 22:24:51 +02:00
< / blockquote >
2002-09-30 20:11:25 +02:00
< h3 align = "left" > < a name = "Subnets" > < / a > 4.2 Subnets< / h3 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > You will still hear the terms "Class A network", "Class B
2003-06-23 22:24:51 +02:00
network" and "Class C network". In the early days of IP, networks only
came in three sizes (there were also Class D networks but they were
used differently):< / p >
< blockquote >
2002-08-07 16:28:04 +02:00
< p align = "left" > Class A - netmask 255.0.0.0, size = 2 ** 24< / p >
2003-06-23 22:24:51 +02:00
2002-08-07 16:28:04 +02:00
< p align = "left" > Class B - netmask 255.255.0.0, size = 2 ** 16< / p >
2003-06-23 22:24:51 +02:00
2002-08-07 16:28:04 +02:00
< p align = "left" > Class C - netmask 255.255.255.0, size = 256< / p >
2003-06-23 22:24:51 +02:00
< / blockquote >
2003-05-18 20:38:34 +02:00
< p align = "left" > The class of a network was uniquely determined by the value
2003-06-23 22:24:51 +02:00
of the high order byte of its address so you could look at an IP address
and immediately determine the associated < i > netmask< / i > . The netmask
is a number that when logically ANDed with an address isolates the < i > network
number< / i > ; the remainder of the address is the < i > host number< / i > .
For example, in the Class C address 192.0.2.14, the network number is
hex C00002 and the host number is hex 0E.< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > As the internet grew, it became clear that such a gross partitioning
2003-06-23 22:24:51 +02:00
of the 32-bit address space was going to be very limiting (early on, large
corporations and universities were assigned their own class A network!).
After some false starts, the current technique of < i > subnetting< / i > these
networks into smaller < i > subnetworks< / i > evolved; that technique is referred
to as<61> < i > Classless InterDomain Routing< / i > (CIDR). Today, any system that
you are likely to work with will understand CIDR and Class-based networking
is largely a thing of the past.< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > A < i > subnetwork< / i > (often referred to as a < i > subnet) < / i > is
2003-06-23 22:24:51 +02:00
a contiguous set of IP addresses such that:< / p >
2002-08-07 16:28:04 +02:00
< ol >
2003-06-23 22:24:51 +02:00
< li >
2002-09-30 20:11:25 +02:00
< p align = "left" > The number of addresses in the set is a power of 2; and< / p >
2003-06-23 22:24:51 +02:00
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > The first address in the set is a multiple of the set
2003-06-23 22:24:51 +02:00
size.< / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > The first address in the subnet is reserved and is referred
2003-06-23 22:24:51 +02:00
to as the < i > subnet address.< / i > < / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > The last address in the subnet is reserved as the < i > subnet's
2003-06-23 22:24:51 +02:00
broadcast address.< / i > < / p >
< / li >
2002-08-07 16:28:04 +02:00
< / ol >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > As you can see by this definition, in each subnet of size
2003-06-23 22:24:51 +02:00
< b > n< / b > there are (< b > n< / b > - 2) usable addresses (addresses that
can be assigned to hosts). The first and last address in the subnet
are used for the subnet address and subnet broadcast address respectively.
Consequently, small subnetworks are more wasteful of IP addresses than
are large ones. < / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > Since < b > n< / b > is a power of two, we can easily calculate
2003-06-23 22:24:51 +02:00
the < i > Natural Logarithm< / i > (< b > log2< / b > ) of < b > n< / b > . For the more
common subnet sizes, the size and its natural logarithm are given in the
following table:< / p >
2003-05-18 20:38:34 +02:00
2003-06-23 22:24:51 +02:00
< blockquote >
2003-03-18 16:16:33 +01:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber5">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > n< / b > < / u > < / td >
< td > < u > < b > log2 n< / b > < / u > < / td >
< td > < u > < b > (32 - log2 n)< / b > < / u > < / td >
< / tr >
< tr >
< td > 8< / td >
< td > 3< / td >
< td > 29< / td >
< / tr >
< tr >
< td > 16< / td >
< td > 4< / td >
< td > 28< / td >
< / tr >
< tr >
< td > 32< / td >
< td > 5< / td >
< td > 27< / td >
< / tr >
< tr >
< td > 64< / td >
< td > 6< / td >
< td > 26< / td >
< / tr >
< tr >
< td > 128< / td >
< td > 7< / td >
< td > 25< / td >
< / tr >
< tr >
< td > 256< / td >
< td > 8< / td >
< td > 24< / td >
< / tr >
< tr >
< td > 512< / td >
< td > 9< / td >
< td > 23< / td >
< / tr >
< tr >
< td > 1024< / td >
< td > 10< / td >
< td > 22< / td >
< / tr >
< tr >
< td > 2048< / td >
< td > 11< / td >
< td > 21< / td >
< / tr >
< tr >
< td > 4096< / td >
< td > 12< / td >
< td > 20< / td >
< / tr >
< tr >
< td > 8192< / td >
< td > 13< / td >
< td > 19< / td >
< / tr >
< tr >
< td > 16384< / td >
< td > 14< / td >
< td > 18< / td >
< / tr >
< tr >
< td > 32768< / td >
< td > 15< / td >
< td > 17< / td >
< / tr >
< tr >
< td > 65536< / td >
< td > 16< / td >
< td > 16< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< p align = "left" > You will notice that the above table also contains a column
for (32 - log2 < b > n< / b > ). That number is the < i > Variable Length Subnet
Mask< / i > for a network of size < b > n< / b > . From the above table, we
can derive the following one which is a little easier to use.< / p >
< blockquote >
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber5">
2003-05-18 20:38:34 +02:00
< tbody >
2003-06-23 22:24:51 +02:00
< tr >
< td > < u > < b > Size of Subnet< / b > < / u > < / td >
< td > < u > < b > VLSM< / b > < / u > < / td >
< td > < u > < b > Subnet Mask< / b > < / u > < / td >
< / tr >
< tr >
< td > 8< / td >
< td > /29< / td >
< td > 255.255.255.248< / td >
< / tr >
< tr >
< td > 16< / td >
< td > /28< / td >
< td > 255.255.255.240< / td >
< / tr >
< tr >
< td > 32< / td >
< td > /27< / td >
< td > 255.255.255.224< / td >
< / tr >
< tr >
< td > 64< / td >
< td > /26< / td >
< td > 255.255.255.192< / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > 128< / td >
2003-06-23 22:24:51 +02:00
< td > /25< / td >
< td > 255.255.255.128< / td >
< / tr >
< tr >
< td > 256< / td >
< td > /24< / td >
< td > 255.255.255.0< / td >
< / tr >
< tr >
< td > 512< / td >
< td > /23< / td >
< td > 255.255.254.0< / td >
< / tr >
< tr >
< td > 1024< / td >
< td > /22< / td >
< td > 255.255.252.0< / td >
< / tr >
< tr >
< td > 2048< / td >
< td > /21< / td >
< td > 255.255.248.0< / td >
< / tr >
< tr >
< td > 4096< / td >
< td > /20< / td >
< td > 255.255.240.0< / td >
< / tr >
< tr >
< td > 8192< / td >
< td > /19< / td >
< td > 255.255.224.0< / td >
< / tr >
< tr >
< td > 16384< / td >
< td > /18< / td >
< td > 255.255.192.0< / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
2003-06-23 22:24:51 +02:00
< td > 32768< / td >
< td > /17< / td >
< td > 255.255.128.0< / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
2003-06-23 22:24:51 +02:00
< td > 65536< / td >
< td > /16< / td >
< td > 255.255.0.0< / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
2003-06-23 22:24:51 +02:00
< td > 2 ** 24< / td >
< td > /8< / td >
< td > 255.0.0.0< / td >
2003-05-18 20:38:34 +02:00
< / tr >
2003-06-23 22:24:51 +02:00
< / tbody >
< / table >
< / blockquote >
< p align = "left" > Notice that the VLSM is written with a slash ("/") -- you
will often hear a subnet of size 64 referred to as a "slash 26" subnet
and one of size 8 referred to as a "slash 29".< / p >
< p align = "left" > The subnet's mask (also referred to as its < i > netmask) < / i > is
simply a 32-bit number with the first "VLSM" bits set to one and the
remaining bits set to zero. For example, for a subnet of size 64,
the subnet mask has 26 leading one bits:< / p >
< blockquote >
< p align = "left" > 11111111111111111111111111000000 = FFFFFFC0 = FF.FF.FF.C0
= 255.255.255.192< / p >
< / blockquote >
2003-05-18 20:38:34 +02:00
2003-06-23 22:24:51 +02:00
< p align = "left" > The subnet mask has the property that if you logically AND
the subnet mask with an address in the subnet, the result is the subnet
address. Just as important, if you logically AND the subnet mask
with an address outside the subnet, the result is NOT the subnet address.
As we will see below, this property of subnet masks is very useful
in routing.< / p >
< p align = "left" > For a subnetwork whose address is < b > a.b.c.d< / b > and whose
Variable Length Subnet Mask is < b > /v< / b > , we denote the subnetwork
as "< b > a.b.c.d/v< / b > " using < i > CIDR< / i > < i > Notation< / i > .<2E> < / p >
< p align = "left" > Example:< / p >
< blockquote >
< table border = "2" style = "border-collapse: collapse;" id = "AutoNumber1"
cellpadding="2">
< tbody >
< tr >
< td > < b > Subnet:< / b > < / td >
< td > 10.10.10.0 - 10.10.10.127< / td >
< / tr >
< tr >
< td > < b > Subnet Size:< / b > < / td >
< td > 128< / td >
< / tr >
< tr >
< td > < b > Subnet Address:< / b > < / td >
< td > 10.10.10.0< / td >
< / tr >
< tr >
< td > < b > Broadcast Address:< / b > < / td >
< td > 10.10.10.127< / td >
< / tr >
< tr >
< td > < b > CIDR<EFBFBD> Notation:< / b > < / td >
< td > 10.10.10.0/25< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
2003-05-18 20:38:34 +02:00
< p align = "left" > There are two degenerate subnets that need mentioning; namely,
2003-06-23 22:24:51 +02:00
the subnet with one member and the subnet with 2 ** 32 members.< / p >
< blockquote >
2003-03-23 19:47:54 +01:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber5">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > Size of Subnetwork< / b > < / u > < / td >
< td > < u > < b > VLSM Length< / b > < / u > < / td >
< td > < u > < b > Subnet Mask< / b > < / u > < / td >
< td > < u > < b > CIDR<EFBFBD> Notation< / b > < / u > < / td >
< / tr >
< tr >
< td > 1< / td >
< td > 32< / td >
< td > 255.255.255.255< / td >
< td > a.b.c.d/32< / td >
< / tr >
< tr >
< td > 2 ** 32< / td >
< td > 0< / td >
< td > 0.0.0.0< / td >
< td > 0.0.0.0/0< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
2003-05-18 20:38:34 +02:00
< p align = "left" > So any address < b > a.b.c.d < / b > may also be written < b > a.b.c.d/32< / b >
2003-06-23 22:24:51 +02:00
and the set of all possible IP addresses is written < b > 0.0.0.0/0< / b > .< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > Later in this guide, you will see the notation < b > a.b.c.d/v< / b >
2003-06-23 22:24:51 +02:00
used to describe the ip configuration of a network interface (the 'ip'
utility also uses this syntax). This simply means that the interface
is configured with ip address < b > a.b.c.d< / b > and with the netmask that
corresponds to VLSM < b > /v< / b > .< / p >
2002-08-07 16:28:04 +02:00
< p align = "left" > Example: 192.0.2.65/29< / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > <EFBFBD> <EFBFBD> <EFBFBD> The interface is configured with IP address 192.0.2.65
2003-06-23 22:24:51 +02:00
and netmask 255.255.255.248.< / p >
2002-08-22 23:33:54 +02:00
< h3 align = "left" > < a name = "Routing" > < / a > 4.3 Routing< / h3 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > One of the purposes of subnetting is that it forms the basis
2003-06-23 22:24:51 +02:00
for routing. Here's the routing table on my firewall:< / p >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > [root@gateway root]# netstat -nr< br > Kernel IP routing table< br > Destination Gateway Genmask Flags MSS Window irtt Iface< br > 192.168.9.1 0.0.0.0 255.255.255.255 UH 40 0 0 texas< br > 206.124.146.177 0.0.0.0 255.255.255.255 UH 40 0 0 eth1< br > 206.124.146.180 0.0.0.0 255.255.255.255 UH 40 0 0 eth3< br > 192.168.3.0 0.0.0.0 255.255.255.0 U 40 0 0 eth3< br > 192.168.2.0 0.0.0.0 255.255.255.0 U 40 0 0 eth1< br > 192.168.1.0 0.0.0.0 255.255.255.0 U 40 0 0 eth2< br > 206.124.146.0 0.0.0.0 255.255.255.0 U 40 0 0 eth0< br > 192.168.9.0 192.0.2.223 255.255.255.0 UG 40 0 0 texas< br > 127.0.0.0 0.0.0.0 255.0.0.0 U 40 0 0 lo< br > 0.0.0.0 206.124.146.254 0.0.0.0 UG 40 0 0 eth0< br > [root@gateway root]#< / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
2003-05-18 20:38:34 +02:00
< p align = "left" > The device < i > texas< / i > is a GRE tunnel to a peer site in
2003-06-23 22:24:51 +02:00
the Dallas, Texas area.< br >
< br >
The first three routes are < i > host routes< / i > since they indicate
how to get to a single host. In the 'netstat' output this can be seen
by the "Genmask" (Subnet Mask) of 255.255.255.255 and the "H" in the
Flags column. The remainder are 'net' routes since they tell the kernel
how to route packets to a subnetwork. The last route is the < i > default
route< / i > and the gateway mentioned in that route is called the < i > default
gateway< / i > .< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > When the kernel is trying to send a packet to IP address
< b > A< / b > , it starts at the top of the routing table and:< / p >
2003-06-23 22:24:51 +02:00
2002-08-22 23:33:54 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > < b > A< / b > is logically ANDed with the 'Genmask' value
in the table entry.< / p >
2003-06-23 22:24:51 +02:00
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > The result is compared with the 'Destination' value in
2003-06-23 22:24:51 +02:00
the table entry.< / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > If the result and the 'Destination' value are the same,
2003-06-23 22:24:51 +02:00
then:< / p >
2002-09-30 20:11:25 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > If the 'Gateway' column is non-zero, the packet is
2003-06-23 22:24:51 +02:00
sent to the gateway over the interface named in the 'Iface' column.< / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > Otherwise, the packet is sent directly to < b > A < / b > over
2003-06-23 22:24:51 +02:00
the interface named in the 'iface' column.< / p >
< / li >
2002-09-30 20:11:25 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > Otherwise, the above steps are repeated on the next entry
2003-06-23 22:24:51 +02:00
in the table.< / p >
< / li >
2002-09-30 20:11:25 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > Since the default route matches any IP address (< b > A< / b >
land 0.0.0.0 = 0.0.0.0), packets that don't match any of the other routing
table entries are sent to the < i > default gateway< / i > which is usually a
router at your ISP.< / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > Lets take an example. Suppose that we want to route a packet
2003-06-23 22:24:51 +02:00
to 192.168.1.5. That address clearly doesn't match any of the host routes
in the table but if we logically and that address with 255.255.255.0,
the result is 192.168.1.0 which matches this routing table entry:< / p >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > 192.168.1.0 0.0.0.0 255.255.255.0 U 40 0 0 eth2< / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
2003-05-18 20:38:34 +02:00
< p > So to route a packet to 192.168.1.5, the packet is sent directly over
eth2.< / p >
2003-06-23 22:24:51 +02:00
< / div >
2003-05-18 20:38:34 +02:00
< p align = "left" > One more thing needs to be emphasized -- all outgoing packet
2003-06-23 22:24:51 +02:00
are sent using the routing table and reply packets are not a special
case. There seems to be a common mis-conception whereby people think
that request packets are like salmon and contain a genetic code that
2003-05-18 20:38:34 +02:00
is magically transferred to reply packets so that the replies follow
the reverse route taken by the request. That isn't the case; the replies
may take a totally different route back to the client than was taken by
the requests -- they are totally independent.< / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< h3 align = "left" > < a name = "ARP" > < / a > 4.4 Address Resolution Protocol (ARP)< / h3 >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > When sending packets over Ethernet, IP addresses aren't used.
2003-06-23 22:24:51 +02:00
Rather Ethernet addressing is based on < i > Media Access Control< / i > (MAC)
addresses. Each Ethernet device has it's own unique<75> MAC address which
is burned into a PROM on the device during manufacture. You can obtain
the MAC of an Ethernet device using the 'ip' utility:< / p >
< blockquote >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< pre > [root@gateway root]# ip addr show eth0< br > 2: eth0: < BROADCAST,MULTICAST,UP> mtu 1500 qdisc htb qlen 100< br > link/ether < u > 02:00:08:e3:fa:55< / u > brd ff:ff:ff:ff:ff:ff< br > inet 206.124.146.176/24 brd 206.124.146.255 scope global eth0< br > inet 206.124.146.178/24 brd 206.124.146.255 scope global secondary eth0< br > inet 206.124.146.179/24 brd 206.124.146.255 scope global secondary eth0< br > [root@gateway root]#< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< / blockquote >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > As you can see from the above output, the MAC is 6 bytes
(48 bits) wide. A card's MAC is usually also printed on a label attached
to the card itself. < / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Because IP uses IP addresses and Ethernet uses MAC addresses,
2003-06-23 22:24:51 +02:00
a mechanism is required to translate an IP address into a MAC address;
that is the purpose of the < i > Address Resolution Protocol< / i > (ARP).
Here is ARP in action:< / p >
< / div >
< div align = "left" >
< blockquote >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< pre > [root@gateway root]# tcpdump -nei eth2 arp< br > tcpdump: listening on eth2< br > 09:56:49.766757 2:0:8:e3:4c:48 0:6:25:aa:8a:f0 arp 42: arp who-has 192.168.1.19 tell 192.168.1.254< br > 09:56:49.769372 0:6:25:aa:8a:f0 2:0:8:e3:4c:48 arp 60: arp reply 192.168.1.19 is-at 0:6:25:aa:8a:f0< br > < br > 2 packets received by filter< br > 0 packets dropped by kernel< br > [root@gateway root]#< br > < / pre >
2003-06-23 22:24:51 +02:00
< / div >
< / blockquote >
< / div >
2003-05-18 20:38:34 +02:00
< p align = "left" > In this exchange, 192.168.1.254 (MAC 2:0:8:e3:4c:48) wants
2003-06-23 22:24:51 +02:00
to know the MAC of the device with IP address 192.168.1.19. The system
having that IP address is responding that the MAC address of the device
with IP address 192.168.1.19 is 0:6:25:aa:8a:f0.< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > In order to avoid having to exchange ARP information each
2003-06-23 22:24:51 +02:00
time that an IP packet is to be sent, systems maintain an < i > ARP cache< / i >
of IP< -> MAC correspondences. You can see the ARP cache on your
system (including your Windows system) using the 'arp' command:< / p >
< blockquote >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< pre > [root@gateway root]# arp -na< br > ? (206.124.146.177) at 00:A0:C9:15:39:78 [ether] on eth1< br > ? (192.168.1.3) at 00:A0:CC:63:66:89 [ether] on eth2< br > ? (192.168.1.5) at 00:A0:CC:DB:31:C4 [ether] on eth2< br > ? (206.124.146.254) at 00:03:6C:8A:18:38 [ether] on eth0< br > ? (192.168.1.19) at 00:06:25:AA:8A:F0 [ether] on eth2< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< / blockquote >
2003-05-18 20:38:34 +02:00
< p align = "left" > The leading question marks are a result of my having specified
2003-06-23 22:24:51 +02:00
the 'n' option (Windows 'arp' doesn't allow that option) which causes
the 'arp' program to forego IP-> DNS name translation. Had I not given
that option, the question marks would have been replaced with the FQDN
corresponding to each IP address. Notice that the last entry in the table
records the information we saw using tcpdump above.< / p >
2002-09-30 20:11:25 +02:00
< h3 align = "left" > < a name = "RFC1918" > < / a > 4.5 RFC 1918< / h3 >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< p align = "left" > IP addresses are allocated by the < i > < a
2003-05-18 20:38:34 +02:00
href="http://www.iana.org">Internet Assigned Number Authority< / a > < / i > (IANA)
2003-06-23 22:24:51 +02:00
who delegates allocations on a geographic basis to < i > Regional Internet
Registries< / i > (RIRs). For example, allocation for the Americas and for
sub-Sahara Africa is delegated to the < i > < a
2003-05-18 20:38:34 +02:00
href="http://www.arin.net">American Registry for Internet Numbers< / a >
2003-06-23 22:24:51 +02:00
< / i > (ARIN). These RIRs may in turn delegate to national registries. Most
of us don't deal with these registrars but rather get our IP addresses
from our ISP.< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > It's a fact of life that most of us can't afford as many
Public IP addresses as we have devices to assign them to so we end up making
use of < i > Private < / i > IP addresses. RFC 1918 reserves several IP address
ranges for this purpose:< / p >
2003-06-23 22:24:51 +02:00
< div align = "left" >
2002-09-30 20:11:25 +02:00
< pre > 10.0.0.0 - 10.255.255.255< br > 172.16.0.0 - 172.31.255.255< br > 192.168.0.0 - 192.168.255.255< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > The addresses reserved by RFC 1918 are sometimes referred
2003-06-23 22:24:51 +02:00
to as < i > non-routable< / i > because the Internet backbone routers don't
forward packets which have an RFC-1918 destination address. This is
understandable given that anyone can select any of these addresses
for their private use.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > When selecting addresses from these ranges, there's a couple
2003-06-23 22:24:51 +02:00
of things to keep in mind:< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > As the IPv4 address space becomes depleted, more and
more organizations (including ISPs) are beginning to use RFC 1918 addresses
2003-06-23 22:24:51 +02:00
in their infrastructure. < / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > You don't want to use addresses that are being used by
2003-06-23 22:24:51 +02:00
your ISP or by another organization with whom you want to establish
a VPN relationship. < / p >
< / li >
2003-02-14 22:27:03 +01:00
< / ul >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > So it's a good idea to check with your ISP to see if they
2003-06-23 22:24:51 +02:00
are using (or are planning to use) private addresses before you decide
the addresses that you are going to use.< / p >
< / div >
< div align = "left" >
2003-02-14 22:27:03 +01:00
< h2 align = "left" > < a name = "Options" > < / a > 5.0 Setting up your Network< / h2 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > The choice of how to set up your network depends primarily
2003-06-23 22:24:51 +02:00
on how many Public IP addresses you have vs. how many addressable
entities you have in your network. Regardless of how many addresses
you have, your ISP will handle that set of addresses in one of two
2003-05-18 20:38:34 +02:00
ways:< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< ol >
2003-06-23 22:24:51 +02:00
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > < b > Routed - < / b > Traffic to any of your addresses will
2003-06-23 22:24:51 +02:00
be routed through a single < i > gateway address< / i > . This will generally
only be done if your ISP has assigned you a complete subnet (/29 or
larger). In this case, you will assign the gateway address as the IP
address of your firewall/router's external interface. < / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > < b > Non-routed - < / b > Your ISP will send traffic to each
2003-06-23 22:24:51 +02:00
of your addresses directly. < / p >
< / li >
2003-02-14 22:27:03 +01:00
< / ol >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > In the subsections that follow, we'll look at each of these
2003-06-23 22:24:51 +02:00
separately.< br >
< / p >
2002-12-28 16:38:03 +01:00
< p align = "left" > Before we begin, there is one thing for you to check:< / p >
2003-06-23 22:24:51 +02:00
2002-12-28 16:38:03 +01:00
< p align = "left" > < img border = "0" src = "images/BD21298_.gif" width = "13"
height="13" alt="">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> If you are using the Debian package, please check your shorewall.conf
file to ensure that the following are set correctly; if they are not,
change them appropriately:< br >
< / p >
2002-12-28 16:38:03 +01:00
< ul >
2003-06-23 22:24:51 +02:00
< li > NAT_ENABLED=Yes< / li >
< li > IP_FORWARDING=On< br >
< / li >
2002-12-28 16:38:03 +01:00
< / ul >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< h3 align = "left" > < a name = "Routed" > < / a > 5.1 Routed< / h3 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Let's assume that your ISP has assigned you the subnet 192.0.2.64/28
2003-06-23 22:24:51 +02:00
routed through 192.0.2.65. That means that you have IP addresses
192.0.2.64 - 192.0.2.79 and that your firewall's external IP address is
192.0.2.65. Your ISP has also told you that you should use a netmask
of 255.255.255.0 (so your /28 is part of a larger /24). With this
many IP addresses, you are able to subnet your /28 into two /29's
and set up your network as shown in the following diagram.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "center" > < img border = "0" src = "images/dmz4.png" width = "726"
height="635">
2003-06-23 22:24:51 +02:00
< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Here, the DMZ comprises the subnet 192.0.2.64/29 and the
Local network is 192.0.2.72/29. The default gateway for hosts in the DMZ
would be configured to 192.0.2.66 and the default gateway for hosts in
the local network would be 192.0.2.73.< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Notice that this arrangement is rather wasteful of public
2003-06-23 22:24:51 +02:00
IP addresses since it is using 192.0.2.64 and 192.0.2.72 for subnet
addresses, 192.0.2.71 and 192.0.2.79 for subnet broadcast addresses
and 192.0.2.66 and 168.0.2.73 for internal addresses on the firewall/router.
Nevertheless, it shows how subnetting can work and if we were dealing
with a /24 rather than a /28 network, the use of 6 IP addresses out
of 256 would be justified because of the simplicity of the setup.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > The astute reader may have noticed that the Firewall/Router's
2003-06-23 22:24:51 +02:00
external interface is actually part of the DMZ subnet (192.0.2.64/29).
What if DMZ 1 (192.0.2.67) tries to communicate with 192.0.2.65? The
routing table on DMZ 1 will look like this:< / p >
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > Kernel IP routing table< br > Destination Gateway Genmask Flags MSS Window irtt Iface< br > 192.0.2.64 0.0.0.0 255.255.255.248 U 40 0 0 eth0< br > 0.0.0.0 192.0.2.66 0.0.0.0 UG 40 0 0 eth0< / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > This means that DMZ 1 will send an ARP "who-has 192.0.2.65"
2003-06-23 22:24:51 +02:00
request and no device on the DMZ Ethernet segment has that IP address.
Oddly enough, the firewall will respond to the request with the MAC
address of its < u > DMZ Interface!!< / u > DMZ 1 can then send Ethernet frames
addressed to that MAC address and the frames will be received (correctly)
by the firewall/router.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > It is this rather unexpected ARP behavior on the part of
the Linux Kernel that prompts the warning earlier in this guide regarding
the connecting of multiple firewall/router interfaces to the same hub
or switch. When an ARP request for one of the firewall/router's IP addresses
is sent by another system connected to the hub/switch, all of the firewall's
2003-06-23 22:24:51 +02:00
interfaces that connect to the hub/switch can respond! It is then
a race as to which "here-is" response reaches the sender first.< / p >
< / div >
< div align = "left" >
2003-02-14 22:27:03 +01:00
< h3 align = "left" > < a name = "NonRouted" > < / a > 5.2 Non-routed< / h3 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > If you have the above situation but it is non-routed,
you can configure your network exactly as described above with one additional
2003-06-23 22:24:51 +02:00
twist; simply specify the "proxyarp" option on all three firewall
2003-05-18 20:38:34 +02:00
interfaces in the /etc/shorewall/interfaces file.< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Most of us don't have the luxury of having enough public
IP addresses to set up our networks as shown in the preceding example
(even if the setup is routed). < / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > < b > For the remainder of this section, assume that your ISP
2003-06-23 22:24:51 +02:00
has assigned you IP addresses 192.0.2.176-180 and has told you to
use netmask 255.255.255.0 and default gateway 192.0.2.254.< / b > < / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Clearly, that set of addresses doesn't comprise a subnetwork
2003-06-23 22:24:51 +02:00
and there aren't enough addresses for all of the network interfaces.
There are four different techniques that can be used to work around
this problem.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< ul >
2003-06-23 22:24:51 +02:00
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > < i > Source Network Address Translation < / i > (SNAT).
2003-06-23 22:24:51 +02:00
< / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > < i > Destination Network Address Translation < / i > (DNAT)
2003-06-23 22:24:51 +02:00
also known as < i > Port Forwarding.< / i > < / p >
< / li >
< li >
2002-09-30 20:11:25 +02:00
< p align = "left" > < i > Proxy ARP.< / i > < / p >
2003-06-23 22:24:51 +02:00
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > < i > Network Address Translation< / i > (NAT) also referred
2003-06-23 22:24:51 +02:00
to as < i > Static NAT< / i > . < / p >
< / li >
2002-08-22 23:33:54 +02:00
< / ul >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Often a combination of these techniques is used. Each of
these will be discussed in the sections that follow.< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< h4 align = "left" > < a name = "SNAT" > < / a > <EFBFBD> 5.2.1 SNAT< / h4 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > With SNAT, an internal LAN segment is configured using RFC
2003-06-23 22:24:51 +02:00
1918 addresses. When a host < b > A < / b > on this internal segment initiates
a connection to host < b > B< / b > on the internet, the firewall/router
rewrites the IP header in the request to use one of your public IP
addresses as the source address. When < b > B< / b > responds and the response
is received by the firewall, the firewall changes the destination
address back to the RFC 1918 address of < b > A< / b > and forwards the response
back to < b > A.< / b > < / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Let's suppose that you decide to use SNAT on your local zone
2003-06-23 22:24:51 +02:00
and use public address 192.0.2.176 as both your firewall's external
IP address and the source IP address of internet requests sent from
that zone.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< h2 align = "center" > < img border = "0" src = "images/dmz5.png" width = "745"
height="635">
2003-06-23 22:24:51 +02:00
< / h2 >
< / div >
2003-05-18 20:38:34 +02:00
< div align = "left" > The local zone has been subnetted as 192.168.201.0/29
2003-06-23 22:24:51 +02:00
(netmask 255.255.255.248).< / div >
2002-09-30 20:11:25 +02:00
< div align = "left" > <20> < / div >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< div align = "left" > < img border = "0" src = "images/BD21298_2.gif"
width="13" height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> The systems in the local zone would be configured with
a default gateway of 192.168.201.1 (the IP address of the firewall's
local interface).< / div >
2002-09-30 20:11:25 +02:00
< div align = "left" > <20> < / div >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< div align = "left" > < img border = "0" src = "images/BD21298_2.gif"
width="13" height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> SNAT is configured in Shorewall using the < a
2002-09-30 20:11:25 +02:00
href="Documentation.htm#Masq"> /etc/shorewall/masq file< / a > .< / div >
2003-06-23 22:24:51 +02:00
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber6">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td width = "33%" > < u > < b > INTERFACE< / b > < / u > < / td >
< td width = "33%" > < u > < b > SUBNET< / b > < / u > < / td >
< td width = "34%" > < u > < b > ADDRESS< / b > < / u > < / td >
< / tr >
< tr >
< td width = "33%" > eth0< / td >
< td width = "33%" > 192.168.201.0/29< / td >
< td width = "34%" > 192.0.2.176< / td >
< / tr >
< / tbody >
2002-08-22 23:33:54 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > This example used the normal technique of assigning the same
2003-06-23 22:24:51 +02:00
public IP address for the firewall external interface and for SNAT.
If you wanted to use a different IP address, you would either have
to use your distributions network configuration tools to add that
IP address to the external interface or you could set ADD_SNAT_ALIASES=Yes
in /etc/shorewall/shorewall.conf and Shorewall will add the address for
you.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< h4 align = "left" > < a name = "DNAT" > < / a > 5.2.2 DNAT< / h4 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > When SNAT is used, it is impossible for hosts on the internet
2003-06-23 22:24:51 +02:00
to initiate a connection to one of the internal systems since those
systems do not have a public IP address. DNAT provides a way to allow
selected connections from the internet.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_2.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> <EFBFBD> Suppose that your daughter wants to run a web server
on her system "Local 3". You could allow connections to the internet
to her server by adding the following entry in < a
2003-02-14 22:27:03 +01:00
href="Documentation.htm#Rules">/etc/shorewall/rules< / a > :< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< td > < u > < b > SOURCE PORT< / b > < / u > < / td >
< td > < u > < b > ORIGINAL DESTINATION< / b > < / u > < / td >
< / tr >
< tr >
< td > DNAT< / td >
< td > net< / td >
< td > loc:192.168.201.4< / td >
< td > tcp< / td >
< td > www< / td >
< td > -< / td >
< td > 192.0.2.176< / td >
< / tr >
< / tbody >
2002-08-22 23:33:54 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > If one of your daughter's friends at address < b > A< / b > wants
2003-06-23 22:24:51 +02:00
to access your daughter's server, she can connect to < a
2003-05-18 20:38:34 +02:00
href="http://192.0.2.176"> http://192.0.2.176< / a > (the firewall's external
2003-06-23 22:24:51 +02:00
IP address) and the firewall will rewrite the destination IP address
to 192.168.201.4 (your daughter's system) and forward the request.
When your daughter's server responds, the firewall will rewrite the
source address back to 192.0.2.176 and send the response back to < b > A.< / b > < / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > This example used the firewall's external IP address for
DNAT. You can use another of your public IP addresses but Shorewall will
not add that address to the firewall's external interface for you.< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< h4 align = "left" > < a name = "ProxyARP" > < / a > 5.2.3 Proxy ARP< / h4 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > The idea behind proxy ARP is that:< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-02-14 22:27:03 +01:00
< ul >
2003-06-23 22:24:51 +02:00
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > A host < b > H < / b > behind your firewall is assigned one
2003-06-23 22:24:51 +02:00
of your public IP addresses (< b > A)< / b > and is assigned the same netmask
< b > (M) < / b > as the firewall's external interface. < / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > The firewall responds to ARP "who has" requests for < b > A.< / b >
2003-06-23 22:24:51 +02:00
< / p >
< / li >
< li >
2003-05-18 20:38:34 +02:00
< p align = "left" > When < b > H< / b > issues an ARP "who has" request for an
address in the subnetwork defined by < b > A< / b > and < b > M< / b > , the firewall
will respond (with the MAC if the firewall interface to < b > H< / b > ). < / p >
2003-06-23 22:24:51 +02:00
< / li >
2003-02-14 22:27:03 +01:00
< / ul >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Let suppose that we decide to use Proxy ARP on the DMZ in
2003-06-23 22:24:51 +02:00
our example network.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "center" > < img border = "0" src = "images/dmz6.png" width = "745"
height="635">
2003-06-23 22:24:51 +02:00
< / p >
< / div >
2003-05-18 20:38:34 +02:00
< div align = "left" > Here, we've assigned the IP addresses 192.0.2.177 to
2003-06-23 22:24:51 +02:00
system DMZ 1 and 192.0.2.178 to DMZ 2. Notice that we've just assigned
an arbitrary RFC 1918 IP address and subnet mask to the DMZ interface
on the firewall. That address and netmask isn't relevant - just be
sure it doesn't overlap another subnet that you've defined.< / div >
2002-09-30 20:11:25 +02:00
< div align = "left" > <20> < / div >
2003-06-23 22:24:51 +02:00
2002-09-30 20:11:25 +02:00
< div align = "left" > < img border = "0" src = "images/BD21298_2.gif"
width="13" height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> The Shorewall configuration of Proxy ARP is done using
the < a href = "Documentation.htm#ProxyArp" > /etc/shorewall/proxyarp< / a > file.< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" id = "AutoNumber8"
style="border-collapse: collapse;">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > ADDRESS< / b > < / u > < / td >
< td > < u > < b > INTERFACE< / b > < / u > < / td >
< td > < u > < b > EXTERNAL< / b > < / u > < / td >
< td > < u > < b > HAVE ROUTE< / b > < / u > < / td >
< / tr >
< tr >
< td > 192.0.2.177< / td >
< td > eth2< / td >
< td > eth0< / td >
< td > No< / td >
< / tr >
< tr >
< td > 192.0.2.178< / td >
< td > eth2< / td >
< td > eth0< / td >
< td > No< / td >
< / tr >
< / tbody >
2002-09-30 20:11:25 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Because the HAVE ROUTE column contains No, Shorewall will
2003-06-23 22:24:51 +02:00
add host routes thru eth2 to 192.0.2.177 and 192.0.2.178.< br >
< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > The ethernet interfaces on DMZ 1 and DMZ 2 should be configured
2003-06-23 22:24:51 +02:00
to have the IP addresses shown but should have the same default gateway
as the firewall itself -- namely 192.0.2.254. In other words, they should
be configured just like they would be if they were parallel to the firewall
rather than behind it.< br >
< / p >
2003-05-18 20:38:34 +02:00
< p > < font color = "#ff0000" > < b > NOTE: Do not add the Proxy ARP'ed address(es)
2003-06-23 22:24:51 +02:00
(192.0.2.177 and 192.0.2.178 in the above example)<29> to the external interface
(eth0 in this example) of the firewall.< / b > < / font > < br >
< / p >
2003-03-23 19:47:54 +01:00
< div align = "left" > < / div >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-01-14 21:32:45 +01:00
< p align = "left" > < / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > A word of warning is in order here. ISPs typically configure
2003-06-23 22:24:51 +02:00
their routers with a long ARP cache timeout. If you move a system from
parallel to your firewall to behind your firewall with Proxy ARP,
it will probably be HOURS before that system can communicate with the
internet. There are a couple of things that you can try:< br >
< / p >
2003-01-14 21:32:45 +01:00
< ol >
2003-06-23 22:24:51 +02:00
< li > (Courtesy of Bradey Honsinger) A reading of Stevens' < i > TCP/IP
Illustrated, Vol 1< / i > reveals that a < br >
< br >
"gratuitous" ARP packet should cause the ISP's router to refresh
their ARP cache (section 4.7). A gratuitous ARP is simply a host requesting
the MAC address for its own IP; in addition to ensuring that the IP address
isn't a duplicate,...< br >
< br >
"if the host sending the gratuitous ARP has just changed its hardware
address..., this packet causes any other host...that has an entry in its
cache for the old hardware address to update its ARP cache entry accordingly."< br >
< br >
Which is, of course, exactly what you want to do when you switch
a host from being exposed to the Internet to behind Shorewall using proxy
ARP (or static NAT for that matter). Happily enough, recent versions of
Redhat's iputils package include "arping", whose "-U" flag does just that:< br >
< br >
<20> <> <EFBFBD> < font color = "#009900" > < b > arping -U -I < net if> < newly
proxied IP> < / b > < / font > < br >
<20> <> <EFBFBD> < font color = "#009900" > < b > arping -U -I eth0 66.58.99.83 # for
example< / b > < / font > < br >
< br >
Stevens goes on to mention that not all systems respond correctly
to gratuitous ARPs, but googling for "arping -U" seems to support the
idea that it works most of the time.< br >
< br >
< / li >
< li > You can call your ISP and ask them to purge the stale ARP
cache entry but many either can't or won't purge individual entries.< / li >
2003-02-14 22:27:03 +01:00
< / ol >
2003-06-23 22:24:51 +02:00
You can determine if your ISP's gateway ARP cache is stale using
ping and tcpdump. Suppose that we suspect that the gateway router has
a stale ARP cache entry for 192.0.2.177. On the firewall, run tcpdump
as follows:< / div >
< div align = "left" >
2003-01-14 21:32:45 +01:00
< pre > < font color = "#009900" > < b > tcpdump -nei eth0 icmp< / b > < / font > < / pre >
2003-05-18 20:38:34 +02:00
< / div >
2003-06-23 22:24:51 +02:00
< div align = "left" >
< p align = "left" > Now from 192.0.2.177, ping the ISP's gateway (which we
will assume is 192.0.2.254):< / p >
< / div >
< div align = "left" >
< pre > < b > < font color = "#009900" > ping 192.0.2.254< / font > < / b > < / pre >
< / div >
< / div >
< div align = "left" >
< p align = "left" > We can now observe the tcpdump output:< / p >
< / div >
< div align = "left" >
2003-02-14 22:27:03 +01:00
< pre > 13:35:12.159321 < u > 0:4:e2:20:20:33< / u > 0:0:77:95:dd:19 ip 98: 192.0.2.177 > 192.0.2.254: icmp: echo request (DF)< br > 13:35:12.207615 0:0:77:95:dd:19 < u > 0:c0:a8:50:b2:57< / u > ip 98: 192.0.2.254 > 192.0.2.177 : icmp: echo reply< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Notice that the source MAC address in the echo request is
2003-06-23 22:24:51 +02:00
different from the destination MAC address in the echo reply!! In
this case 0:4:e2:20:20:33 was the MAC of the firewall's eth0 NIC
while 0:c0:a8:50:b2:57 was the MAC address of DMZ 1. In other words,
the gateway's ARP cache still associates 192.0.2.177 with the NIC
in DMZ 1 rather than with the firewall's eth0.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< h4 align = "left" > < a name = "NAT" > < / a > 5.2.4 Static NAT< / h4 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > With static NAT, you assign local systems RFC 1918 addresses
2003-06-23 22:24:51 +02:00
then establish a one-to-one mapping between those addresses and public
IP addresses. For outgoing connections SNAT (Source Network Address
Translation) occurs and on incoming connections DNAT (Destination
Network Address Translation) occurs. Let's go back to our earlier example
involving your daughter's web server running on system Local 3.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "center" > < img border = "0" src = "images/dmz5.png" width = "745"
height="635">
2003-06-23 22:24:51 +02:00
< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Recall that in this setup, the local network is using SNAT
2003-06-23 22:24:51 +02:00
and is sharing the firewall external IP (192.0.2.176) for outbound
connections. This is done with the following entry in /etc/shorewall/masq:< / p >
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber6">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td width = "33%" > < u > < b > INTERFACE< / b > < / u > < / td >
< td width = "33%" > < u > < b > SUBNET< / b > < / u > < / td >
< td width = "34%" > < u > < b > ADDRESS< / b > < / u > < / td >
< / tr >
< tr >
< td width = "33%" > eth0< / td >
< td width = "33%" > 192.168.201.0/29< / td >
< td width = "34%" > 192.0.2.176< / td >
< / tr >
< / tbody >
2002-09-30 20:11:25 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_1.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> Suppose now that you have decided to give your daughter
her own IP address (192.0.2.179) for both inbound and outbound connections.
You would do that by adding an entry in < a
2003-03-18 16:16:33 +01:00
href="Documentation.htm#NAT">/etc/shorewall/nat< / a > .< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellspacing = "0" cellpadding = "2" id = "AutoNumber9"
style="border-collapse: collapse;">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > EXTERNAL< / td >
< td > INTERFACE< / td >
< td > INTERNAL< / td >
< td > ALL INTERFACES < / td >
< td > LOCAL< / td >
< / tr >
< tr >
< td > 192.0.2.179< / td >
< td > eth0< / td >
< td > 192.168.201.4< / td >
< td > No< / td >
< td > No< / td >
< / tr >
< / tbody >
2002-09-30 20:11:25 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > With this entry in place, you daughter has her own IP address
2003-06-23 22:24:51 +02:00
and the other two local systems share the firewall's IP address.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_1.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> Once the relationship between 192.0.2.179 and 192.168.201.4
is established by the nat file entry above, it is no longer appropriate
to use a DNAT rule for you daughter's web server -- you would rather
just use an ACCEPT rule:< / p >
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< td > < u > < b > SOURCE PORT< / b > < / u > < / td >
< td > < u > < b > ORIGINAL DESTINATION< / b > < / u > < / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > loc:192.168.201.4< / td >
< td > tcp< / td >
< td > www< / td >
< td > <EFBFBD> < / td >
< td > <EFBFBD> < / td >
< / tr >
< / tbody >
2002-09-30 20:11:25 +02:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
< div align = "left" >
< div align = "left" >
< p align = "left" > A word of warning is in order here. ISPs typically configure
their routers with a long ARP cache timeout. If you move a system from
parallel to your firewall to behind your firewall with static NAT,
it will probably be HOURS before that system can communicate with the
internet. There are a couple of things that you can try:< br >
< / p >
< ol >
< li > (Courtesy of Bradey Honsinger) A reading of Stevens' < i > TCP/IP Illustrated,
Vol 1< / i > reveals that a < br >
< br >
"gratuitous" ARP packet should cause the ISP's router to refresh
their ARP cache (section 4.7). A gratuitous ARP is simply a host requesting
the MAC address for its own IP; in addition to ensuring that the IP address
isn't a duplicate,...< br >
< br >
"if the host sending the gratuitous ARP has just changed its hardware
address..., this packet causes any other host...that has an entry in its
cache for the old hardware address to update its ARP cache entry accordingly."< br >
< br >
Which is, of course, exactly what you want to do when you switch
a host from being exposed to the Internet to behind Shorewall using proxy
ARP (or static NAT for that matter). Happily enough, recent versions of
Redhat's iputils package include "arping", whose "-U" flag does just that:< br >
< br >
<20> <> <EFBFBD> < font color = "#009900" > < b > arping -U -I < net if> < newly
proxied IP> < / b > < / font > < br >
<20> <> <EFBFBD> < font color = "#009900" > < b > arping -U -I eth0 66.58.99.83 # for
example< / b > < / font > < br >
< br >
Stevens goes on to mention that not all systems respond correctly
to gratuitous ARPs, but googling for "arping -U" seems to support the
idea that it works most of the time.< br >
< br >
< / li >
< li > You can call your ISP and ask them to purge the stale ARP cache
entry but many either can't or won't purge individual entries.< / li >
< / ol >
You can determine if your ISP's gateway ARP cache is stale using
ping and tcpdump. Suppose that we suspect that the gateway router has
a stale ARP cache entry for 209.0.2.179. On the firewall, run tcpdump
as follows:< / div >
< div align = "left" >
< pre > < font color = "#009900" > < b > tcpdump -nei eth0 icmp< / b > < / font > < / pre >
< / div >
< div align = "left" >
< p align = "left" > Now from the 192.168.201.4, ping the ISP's gateway (which
we will assume is 192.0.2.254):< / p >
< / div >
< div align = "left" >
< pre > < b > < font color = "#009900" > ping 192.0.2.254< / font > < / b > < / pre >
< / div >
< / div >
< div align = "left" >
< p align = "left" > We can now observe the tcpdump output:< / p >
< / div >
< div align = "left" >
< pre > 13:35:12.159321 < u > 0:4:e2:20:20:33< / u > 0:0:77:95:dd:19 ip 98: 192.0.2.179 > 192.0.2.254: icmp: echo request (DF)< br > 13:35:12.207615 0:0:77:95:dd:19 < u > 0:c0:a8:50:b2:57< / u > ip 98: 192.0.2.254 > 192.0.2.179 : icmp: echo reply< / pre >
< / div >
< div align = "left" >
< p align = "left" > Notice that the source MAC address in the echo request is
different from the destination MAC address in the echo reply!! In
this case 0:4:e2:20:20:33 was the MAC of the firewall's eth0 NIC
while 0:c0:a8:50:b2:57 was the MAC address of DMZ 1. In other words,
the gateway's ARP cache still associates 192.0.2.179 with the NIC
in the local zone rather than with the firewall's eth0.< / p >
< / div >
2002-09-30 20:11:25 +02:00
< h3 align = "left" > < a name = "Rules" > < / a > 5.3 Rules< / h3 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_1.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> With the default policies, your local systems (Local 1-3)
can access any servers on the internet and the DMZ can't access any
other host (including the firewall). With the exception of < a
2003-05-18 20:38:34 +02:00
href="#DNAT">DNAT rules< / a > which cause address translation and allow
2003-06-23 22:24:51 +02:00
the translated connection request to pass through the firewall, the
way to allow connection requests through your firewall is to use ACCEPT
rules.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > < b > NOTE: Since the SOURCE PORT and ORIG. DEST. Columns aren't
2003-06-23 22:24:51 +02:00
used in this section, they won't be shown< / b > < / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > You probably want to allow ping between your zones:< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz< / td >
< td > icmp< / td >
< td > echo-request< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > loc< / td >
< td > icmp< / td >
< td > echo-request< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz< / td >
< td > loc< / td >
< td > icmp< / td >
< td > echo-request< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz< / td >
< td > icmp< / td >
< td > echo-request< / td >
< / tr >
< / tbody >
< / table >
< / blockquote >
< / div >
< div align = "left" >
< p align = "left" > Let's suppose that you run mail and pop3 servers on DMZ 2
and a Web Server on DMZ 1. The rules that you would need are:< / p >
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< td > < u > < b > COMMENTS< / b > < / u > < / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail from the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > pop3< / td >
< td > # Pop3 from the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail from the Local Network< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > pop3< / td >
< td > # Pop3 from the Local Network< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > fw< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail from the Firewall< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz:192.0.2.178< / td >
< td > net< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail to the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > http< / td >
< td > # WWW from the Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > https< / td >
< td > # Secure HTTP from the Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > https< / td >
< td > # Secure HTTP from the Local Net< / td >
< / tr >
< / tbody >
< / table >
< / blockquote >
< / div >
< div align = "left" >
< p align = "left" > If you run a public DNS server on 192.0.2.177, you would
need to add the following rules:< / p >
< / div >
< div align = "left" >
< blockquote >
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< td > < u > < b > COMMENTS< / b > < / u > < / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.177< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS from the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS from the internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > fw< / td >
< td > dmz:192.0.2.177< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS from firewall< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > fw< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS from firewall< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.177< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS from the local Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS from the local Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz:192.0.2.177< / td >
< td > net< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS to the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz:192.0.2.177< / td >
< td > net< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS to the Internet< / td >
< / tr >
< / tbody >
< / table >
< / blockquote >
< / div >
< div align = "left" >
< p align = "left" > You probably want some way to communicate with your firewall
and DMZ systems from the local network -- I recommend SSH which through
its scp utility can also do publishing and software update distribution.< / p >
< / div >
< div align = "left" >
< blockquote >
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< td > < u > < b > COMMENTS< / b > < / u > < / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz< / td >
< td > tcp< / td >
< td > ssh< / td >
< td > # SSH to the DMZ< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > fw< / td >
< td > tcp< / td >
< td > ssh< / td >
< td > # SSH to the Firewall< / td >
< / tr >
< / tbody >
< / table >
< / blockquote >
< / div >
< div align = "left" >
< h3 align = "left" > < a name = "OddsAndEnds" > < / a > 5.4 Odds and Ends< / h3 >
< / div >
< div align = "left" >
< p align = "left" > The above discussion reflects my personal preference for
using Proxy ARP for my servers in my DMZ and SNAT/NAT for my local systems.
I prefer to use NAT only in cases where a system that is part of an RFC
1918 subnet needs to have it's own public IP.<2E> < / p >
< / div >
< div align = "left" >
< p align = "left" > < img border = "0" src = "images/BD21298_2.gif" width = "13"
height="13">
<20> <> <EFBFBD> If you haven't already, it would be a good idea to browse
through < a href = "Documentation.htm#Conf" > /etc/shorewall/shorewall.conf< / a >
just to see if there is anything there that might be of interest.
You might also want to look at the other configuration files that
you haven't touched yet just to get a feel for the other things that
Shorewall can do.< / p >
< / div >
< div align = "left" >
< p align = "left" > In case you haven't been keeping score, here's the final
set of configuration files for our sample network. Only those that were
modified from the original installation are shown.< / p >
< / div >
< div align = "left" >
< p align = "left" > /etc/shorewall/interfaces (The "options" will be very
site-specific).< / p >
< / div >
< div align = "left" >
< blockquote >
< table border = "1" cellpadding = "0" cellspacing = "0"
style="border-collapse: collapse;" id="AutoNumber4">
2003-05-18 20:38:34 +02:00
< tbody >
2003-06-23 22:24:51 +02:00
< tr >
< td > < u > < b > Zone< / b > < / u > < / td >
< td > < u > < b > Interface< / b > < / u > < / td >
< td > < u > < b > Broadcast< / b > < / u > < / td >
< td > < u > < b > Options< / b > < / u > < / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > net< / td >
2003-06-23 22:24:51 +02:00
< td > eth0< / td >
< td > detect< / td >
< td > norfc1918,routefilter < / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > loc< / td >
2003-06-23 22:24:51 +02:00
< td > eth1< / td >
< td > detect< / td >
< td > <EFBFBD> < / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > dmz< / td >
2003-06-23 22:24:51 +02:00
< td > eth2< / td >
< td > detect< / td >
< td > <EFBFBD> < / td >
2003-05-18 20:38:34 +02:00
< / tr >
2003-06-23 22:24:51 +02:00
< / tbody >
2002-12-28 16:38:03 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
< p align = "left" > The setup described here requires that your network interfaces
be brought up before Shorewall can start. This opens a short window
during which you have no firewall protection. If you replace 'detect'
with the actual broadcast addresses in the entries above, you can bring
up Shorewall before you bring up your network interfaces.< / p >
< / div >
< div align = "left" >
< blockquote >
< table border = "1" cellpadding = "0" cellspacing = "0"
style="border-collapse: collapse;" id="AutoNumber4">
2003-05-18 20:38:34 +02:00
< tbody >
2003-06-23 22:24:51 +02:00
< tr >
< td > < u > < b > Zone< / b > < / u > < / td >
< td > < u > < b > Interface< / b > < / u > < / td >
< td > < u > < b > Broadcast< / b > < / u > < / td >
< td > < u > < b > Options< / b > < / u > < / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > net< / td >
2003-06-23 22:24:51 +02:00
< td > eth0< / td >
< td > 192.0.2.255< / td >
< td > norfc1918,routefilter < / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > loc< / td >
2003-06-23 22:24:51 +02:00
< td > eth1< / td >
< td > 192.168.201.7< / td >
< td > <EFBFBD> < / td >
2003-05-18 20:38:34 +02:00
< / tr >
< tr >
< td > dmz< / td >
2003-06-23 22:24:51 +02:00
< td > eth2< / td >
< td > 192.168.202.7< / td >
< td > <EFBFBD> < / td >
2003-05-18 20:38:34 +02:00
< / tr >
2003-06-23 22:24:51 +02:00
< / tbody >
2002-12-28 16:38:03 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
2003-05-18 20:38:34 +02:00
2003-06-23 22:24:51 +02:00
< div align = "left" >
2003-03-23 19:47:54 +01:00
< p align = "left" > /etc/shorewall/masq - Local subnet< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2003-03-23 19:47:54 +01:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber6">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td width = "33%" > < u > < b > INTERFACE< / b > < / u > < / td >
< td width = "33%" > < u > < b > SUBNET< / b > < / u > < / td >
< td width = "34%" > < u > < b > ADDRESS< / b > < / u > < / td >
< / tr >
< tr >
< td width = "33%" > eth0< / td >
< td width = "33%" > 192.168.201.0/29< / td >
< td width = "34%" > 192.0.2.176< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-03-23 19:47:54 +01:00
< p align = "left" > /etc/shorewall/proxyarp - DMZ< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2003-03-23 19:47:54 +01:00
< table border = "1" cellpadding = "2" id = "AutoNumber8"
style="border-collapse: collapse;">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > ADDRESS< / b > < / u > < / td >
< td > < u > < b > INTERFACE< / b > < / u > < / td >
< td > < u > < b > EXTERNAL< / b > < / u > < / td >
< td > < u > < b > HAVE ROUTE< / b > < / u > < / td >
< / tr >
< tr >
< td > 192.0.2.177< / td >
< td > eth2< / td >
< td > eth0< / td >
< td > No< / td >
< / tr >
< tr >
< td > 192.0.2.178< / td >
< td > eth2< / td >
< td > eth0< / td >
< td > No< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-03-23 19:47:54 +01:00
< p align = "left" > /etc/shorewall/nat- Daughter's System< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2003-03-23 19:47:54 +01:00
< table border = "1" cellpadding = "2" id = "AutoNumber9"
style="border-collapse: collapse;">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > EXTERNAL< / td >
< td > INTERFACE< / td >
< td > INTERNAL< / td >
< td > ALL INTERFACES < / td >
< td > LOCAL< / td >
< / tr >
< tr >
< td > 192.0.2.179< / td >
< td > eth0< / td >
< td > 192.168.201.4< / td >
< td > No< / td >
< td > No< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-03-23 19:47:54 +01:00
< p align = "left" > /etc/shorewall/rules< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2003-03-23 19:47:54 +01:00
< table border = "1" cellpadding = "2" style = "border-collapse: collapse;"
id="AutoNumber7">
2003-06-23 22:24:51 +02:00
< tbody >
< tr >
< td > < u > < b > ACTION< / b > < / u > < / td >
< td > < u > < b > SOURCE< / b > < / u > < / td >
< td > < u > < b > DESTINATION< / b > < / u > < / td >
< td > < u > < b > PROTOCOL< / b > < / u > < / td >
< td > < u > < b > PORT< / b > < / u > < / td >
< td > < u > < b > COMMENTS< / b > < / u > < / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail from the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > pop3< / td >
< td > # Pop3 from the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail from the Local Network< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > pop3< / td >
< td > # Pop3 from the Local Network< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > fw< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail from the Firewall< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz:192.0.2.178< / td >
< td > net< / td >
< td > tcp< / td >
< td > smtp< / td >
< td > # Mail to the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > http< / td >
< td > # WWW from the Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > https< / td >
< td > # Secure HTTP from the Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.178< / td >
< td > tcp< / td >
< td > https< / td >
< td > # Secure HTTP from the Local Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.177< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS from the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS from the internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > fw< / td >
< td > dmz:192.0.2.177< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS from firewall< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > fw< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS from firewall< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.177< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS from the local Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz:192.0.2.177< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS from the local Net< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz:192.0.2.177< / td >
< td > net< / td >
< td > udp< / td >
< td > domain< / td >
< td > # UDP DNS to the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz:192.0.2.177< / td >
< td > net< / td >
< td > tcp< / td >
< td > domain< / td >
< td > # TCP DNS to the Internet< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > dmz< / td >
< td > icmp< / td >
< td > echo-request< / td >
< td > # Ping< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > net< / td >
< td > loc< / td >
< td > icmp< / td >
< td > echo-request< / td >
< td > #<23> "< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > dmz< / td >
< td > loc< / td >
< td > icmp< / td >
< td > echo-request< / td >
< td > # "< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz< / td >
< td > icmp< / td >
< td > echo-request< / td >
< td > # "< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > dmz< / td >
< td > tcp< / td >
< td > ssh< / td >
< td > # SSH to the DMZ< / td >
< / tr >
< tr >
< td > ACCEPT< / td >
< td > loc< / td >
< td > fw< / td >
< td > tcp< / td >
< td > ssh< / td >
< td > # SSH to the Firewall< / td >
< / tr >
< / tbody >
2003-03-23 19:47:54 +01:00
< / table >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< h2 align = "left" > < a name = "DNS" > < / a > 6.0 DNS< / h2 >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Given the collection of RFC 1918 and public addresses in
this setup, it only makes sense to have separate internal and external
DNS servers. You can combine the two into a single BIND 9 server using
< i > Views. < / i > If you are not interested in Bind 9 views, you can < a
2002-09-30 20:11:25 +02:00
href="#StartingAndStopping">go to the next section< / a > .< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Suppose that your domain is foobar.net and you want the two
2003-06-23 22:24:51 +02:00
DMZ systems named www.foobar.net and mail.foobar.net and you want
the three local systems named "winken.foobar.net, blinken.foobar.net
and nod.foobar.net. You want your firewall to be known as firewall.foobar.net
externally and it's interface to the local network to be know as gateway.foobar.net
and its interface to the dmz as dmz.foobar.net. Let's have the DNS
server on 192.0.2.177 which will also be known by the name ns1.foobar.net.< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > The /etc/named.conf file would look like this:< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
< div align = "left" >
2002-12-28 16:38:03 +01:00
< pre > options {< br > directory "/var/named";< br > listen-on { 127.0.0.1 ; 192.0.2.177; };< br > };< br > < br > logging {< br > channel xfer-log {< br > file "/var/log/named/bind-xfer.log";< br > print-category yes;< br > print-severity yes;< br > print-time yes;< br > severity info;< br > };< br > category xfer-in { xfer-log; };< br > category xfer-out { xfer-log; };< br > category notify { xfer-log; };< br > };< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< pre > #< br > # This is the view presented to our internal systems< br > #< br > < br > view "internal" {< br > #< br > # These are the clients that see this view< br > #< br > match-clients { 192.168.201.0/29;< br > 192.168.202.0/29;< br > 127.0.0.0/8;< br > 192.0.2.176/32; < br > 192.0.2.178/32;< br > 192.0.2.179/32;< br > 192.0.2.180/32; };< br > #< br > # If this server can't complete the request, it should use outside< br > # servers to do so< br > #< br > recursion yes;< br > < br > zone "." in {< br > type hint;< br > file "int/root.cache";< br > };< br > < br > zone "foobar.net" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "int/db.foobar";< br > };< br > < br > zone "0.0.127.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "int/db.127.0.0"; < br > };< br > < br > zone "201.168.192.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "int/db.192.168.201";< br > };< br > < br > zone "202.168.192.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "int/db.192.168.202";< br > };< br > < br > zone "176.2.0.192.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "db.192.0.2.176";< br > };< br > (or status NAT for that matter)< br > zone "177.2.0.192.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "db.192.0.2.177";< br > };< br > < br > zone "178.2.0.192.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "db.192.0.2.178";< br > };< br > < br > zone "179.2.0.192.in-addr.arpa" in {< br > type master;< br > notify no;< br > allow-update { none; };< br > file "db.206.124.146.179";< br > };< br > < br > };< br > #< br > # This is the view that we present to the outside world< br > #< br > view "external" {< br > match-clients { any; };< br > #< br > # If we can't answer the query, we tell the client so< br > #< br > recursion no;< br > < br > zone "foobar.net" in {< br > type master;< br > notify yes;< br > allow-update {none; };< br > allow-transfer { < i > < secondary NS IP> < / i > ; };< br > file "ext/db.foobar";< br > };< br > < br > zone "176.2.0.192.in-addr.arpa" in {< br > type master;< br > notify yes;< br > allow-update { none; };< br > allow-transfer { < i > < secondary NS IP> < / i > ; };< br > file "db.192.0.2.176";< br > };< br > < br > zone "177.2.0.192.in-addr.arpa" in {< br > type master;< br > notify yes;< br > allow-update { none; };< br > allow-transfer { < i > < secondary NS IP> < / i > ; };< br > file "db.192.0.2.177";< br > };< br > < br > zone "178.2.0.192.in-addr.arpa" in {< br > type master;< br > notify yes;< br > allow-update { none; };< br > allow-transfer { < i > < secondary NS IP> < / i > ; };< br > file "db.192.0.2.178";< br > };< br > < br > zone "179.2.0.192.in-addr.arpa" in {< br > type master;< br > notify yes;< br > allow-update { none; };< br > allow-transfer { < i > < secondary NS IP> < / i > ; };< br > file "db.192.0.2.179";< br > };< br > };< / pre >
< / div >
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > Here are the files in /var/named (those not shown are usually
2003-06-23 22:24:51 +02:00
included in your bind disbribution).< / p >
2003-05-18 20:38:34 +02:00
< p align = "left" > db.192.0.2.176 - This is the reverse zone for the firewall's
2003-06-23 22:24:51 +02:00
external interface< / p >
< blockquote >
2003-02-14 22:27:03 +01:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 192.0.2.176/32< br > ; Filename: db.192.0.2.176< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2001102303 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > ;< br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > @ 604800 IN NS < i > < name of secondary ns> < / i > .< br > ;< br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's) < br > ; ############################################################< br > 176.2.0.192.in-addr.arpa. 86400 IN PTR firewall.foobar.net.< br > < / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< div align = "left" > db.192.0.2.177 - This is the reverse zone for the www/DNS
2003-06-23 22:24:51 +02:00
server
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 192.0.2.177/32< br > ; Filename: db.192.0.2.177< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2001102303 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > ;< br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > @ 604800 IN NS < i > < name of secondary ns> < / i > .< br > ;< br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's) < br > ; ############################################################< br > 177.2.0.192.in-addr.arpa. 86400 IN PTR www.foobar.net.< br > < / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< div align = "left" > db.192.0.2.178 - This is the reverse zone for the mail
2003-06-23 22:24:51 +02:00
server
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 192.0.2.178/32< br > ; Filename: db.192.0.2.178< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2001102303 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > ;< br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > @ 604800 IN NS < i > < name of secondary ns> < / i > .< br > ;< br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's) < br > ; ############################################################< br > 178.2.0.192.in-addr.arpa. 86400 IN PTR mail.foobar.net.< br > < / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< div align = "left" > db.192.0.2.179 - This is the reverse zone for daughter's
2003-06-23 22:24:51 +02:00
web server's public IP
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 192.0.2.179/32< br > ; Filename: db.192.0.2.179< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2001102303 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > ;< br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > @ 604800 IN NS < i > < name of secondary ns> < / i > .< br > ;< br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's) < br > ; ############################################################< br > 179.2.0.192.in-addr.arpa. 86400 IN PTR nod.foobar.net.< br > < / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > int/db.127.0.0 - The reverse zone for localhost< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2003-05-18 20:38:34 +02:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 127.0.0.0/8< br > ; Filename: db.127.0.0< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2001092901 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > < br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's)< br > ; ############################################################< br > 1 86400 IN PTR localhost.foobar.net.< / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > int/db.192.168.201 - Reverse zone for the local net. This
2003-06-23 22:24:51 +02:00
is only shown to internal clients< / p >
< / div >
< div align = "left" >
< blockquote >
2002-09-30 20:11:25 +02:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 192.168.201.0/29< br > ; Filename: db.192.168.201< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net netadmin.foobar.net. (< br > 2002032501 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > < br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > < br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's)< br > ; ############################################################< br > 1 86400 IN PTR gateway.foobar.net.< br > 2 86400 IN PTR winken.foobar.net.< br > 3 86400 IN PTR blinken.foobar.net.< br > 4 86400 IN PTR nod.foobar.net.< / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > int/db.192.168.202 - Reverse zone for the firewall's DMZ
interface< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< pre > ; ############################################################< br > ; Start of Authority (Inverse Address Arpa) for 192.168.202.0/29< br > ; Filename: db.192.168.202< br > ; ############################################################< br > @ 604800 IN SOA ns1.foobar.net netadmin.foobar.net. (< br > 2002032501 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ) ; minimum (1 day)< br > < br > ; ############################################################< br > ; Specify Name Servers for all Reverse Lookups (IN-ADDR.ARPA)< br > ; ############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > < br > ; ############################################################< br > ; Iverse Address Arpa Records (PTR's)< br > ; ############################################################< br > 1 86400 IN PTR dmz.foobar.net.< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< / blockquote >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > int/db.foobar - Forward zone for use by internal clients.< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
2003-05-18 20:38:34 +02:00
< pre > ;##############################################################< br > ; Start of Authority for foobar.net.< br > ; Filename: db.foobar< br > ;##############################################################< br > @ 604800 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2002071501 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ); minimum (1 day)< br > ;############################################################< br > ; foobar.net Nameserver Records (NS)< br > ;############################################################< br > @ 604800 IN NS ns1.foobar.net.< br > < br > ;############################################################< br > ; Foobar.net Office Records (ADDRESS)< br > ;############################################################< br > localhost 86400 IN A 127.0.0.1< br > < br > firewall 86400 IN A 192.0.2.176< br > www 86400 IN A 192.0.2.177< br > ns1 86400 IN A 192.0.2.177< br > www 86400 IN A 192.0.2.177< br > < br > gateway 86400 IN A 192.168.201.1< br > winken 86400 IN A 192.168.201.2< br > blinken 86400 IN A 192.168.201.3< br > nod 86400 IN A 192.168.201.4< / pre >
2003-06-23 22:24:51 +02:00
< / blockquote >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > ext/db.foobar - Forward zone for external clients< / p >
2003-06-23 22:24:51 +02:00
< / div >
< div align = "left" >
< blockquote >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< pre > ;##############################################################< br > ; Start of Authority for foobar.net.< br > ; Filename: db.foobar< br > ;##############################################################< br > @ 86400 IN SOA ns1.foobar.net. netadmin.foobar.net. (< br > 2002052901 ; serial< br > 10800 ; refresh (3 hour)< br > 3600 ; retry (1 hour)< br > 604800 ; expire (7 days)< br > 86400 ); minimum (1 day)< br > ;############################################################< br > ; Foobar.net Nameserver Records (NS)< br > ;############################################################< br > @ 86400 IN NS ns1.foobar.net.< br > @ 86400 IN NS < i > < secondary NS> < / i > .< br > ;############################################################< br > ; Foobar.net Foobar Wa Office Records (ADDRESS)< br > ;############################################################< br > localhost 86400 IN A 127.0.0.1< br > ;< br > ; The firewall itself< br > ;< br > firewall 86400 IN A 192.0.2.176< br > ;< br > ; The DMZ< br > ;< br > ns1 86400 IN A 192.0.2.177< br > www 86400 IN A 192.0.2.177< br > mail 86400 IN A 192.0.2.178< br > ;< br > ; The Local Network< br > ;< br > nod 86400 IN A 192.0.2.179< br > < br > ;############################################################< br > ; Current Aliases for foobar.net (CNAME)< br > ;############################################################< br > < br > ;############################################################< br > ; foobar.net MX Records (MAIL EXCHANGER)< br > ;############################################################< br > foobar.net. 86400 IN A 192.0.2.177< br > 86400 IN MX 0 mail.foobar.net.< br > 86400 IN MX 1 < i > < backup MX> < / i > .< / pre >
2003-06-23 22:24:51 +02:00
< / div >
< / blockquote >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< h2 align = "left" > < a name = "StartingAndStopping" > < / a > 7.0 Starting and Stopping
2003-06-23 22:24:51 +02:00
Your Firewall< / h2 >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > The < a href = "Install.htm" > installation procedure < / a > configures
2003-06-23 22:24:51 +02:00
your system to start Shorewall at system boot.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > The firewall is started using the "shorewall start" command
2003-06-23 22:24:51 +02:00
and stopped using "shorewall stop". When the firewall is stopped,
routing is enabled on those hosts that have an entry in < a
2003-05-18 20:38:34 +02:00
href="Documentation.htm#Routestopped">/etc/shorewall/routestopped< / a > . A
2003-06-23 22:24:51 +02:00
running firewall may be restarted using the "shorewall restart" command.
If you want to totally remove any trace of Shorewall from your Netfilter
configuration, use "shorewall clear".< / p >
< / div >
< div align = "left" >
2002-09-30 20:11:25 +02:00
< p align = "left" > < img border = "0" src = "images/BD21298_2.gif" width = "13"
height="13">
2003-06-23 22:24:51 +02:00
<20> <> <EFBFBD> Edit the /etc/shorewall/routestopped file and configure
those systems that you want to be able to access the firewall when
it is stopped.< / p >
< / div >
< div align = "left" >
2003-05-18 20:38:34 +02:00
< p align = "left" > < b > WARNING: < / b > If you are connected to your firewall from
2003-06-23 22:24:51 +02:00
the internet, do not issue a "shorewall stop" command unless you have
added an entry for the IP address that you are connected from to
< a href = "Documentation.htm#Routestopped" > /etc/shorewall/routestopped< / a > .
Also, I don't recommend using "shorewall restart"; it is better to create
an < i > < a href = "Documentation.htm#Configs" > alternate configuration< / a > < / i >
and test it using the < a href = "Documentation.htm#Starting" > "shorewall
try" command< / a > .< / p >
< / div >
< p align = "left" > < font size = "2" > Last updated 6/7/2003 - < a
2002-09-30 20:11:25 +02:00
href="support.htm">Tom Eastep< / a > < / font > < / p >
2003-06-23 22:24:51 +02:00
2003-05-18 20:38:34 +02:00
< p align = "left" > < a href = "copyright.htm" > < font size = "2" > Copyright 2002, 2003
2003-06-23 22:24:51 +02:00
Thomas M. Easte< / font > < / a > < br >
< / p >
2002-12-28 16:38:03 +01:00
< br >
2002-09-30 20:11:25 +02:00
< / body >
< / html >
