shorewall_code/Shorewall/compiler

9000 lines
211 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# The Shoreline Firewall (Shorewall) Packet Filtering Firewall Compiler - V3.2
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# (c) 1999,2000,2001,2002,2003,2004,2005,2006 - Tom Eastep (teastep@shorewall.net)
#
# tcstart from tc4shorewall Version 0.5
# (c) 2005 Arne Bernin <arne@ucbering.de>
# Modified by Tom Eastep for integration into the Shorewall distribution
# published under GPL Version 2#
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
# If an error occurs while starting or restarting the firewall, the
# firewall is automatically stopped.
#
# Commands are:
#
# compile check Verify the configuration files.
# compile compile <path name> Compile into <path name>
#
# Environmental Variables:
#
# EXPORT=Yes -e option specified to /sbin/shorewall
# SHOREWALL_DIR A directory name was passed to /sbin/shorewall
# VERBOSE Standard Shorewall verbosity control.
# Fatal error -- stops the compiler after issuing the error message
#
fatal_error() # $* = Error Message
{
echo " ERROR: $@" >&2
[ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
[ -n "$OUTPUT" ] && rm -f $OUTPUT
kill $$
exit 2
}
#
# Write the passed args to the compiler output file.
#
save_command()
{
[ $# -gt 0 ] && echo "${INDENT}${@}" >&3 || echo >&3
}
save_command_unindented()
{
echo "${@}" >&3
}
#
# Write a progress_message2 command to the output file.
#
save_progress_message()
{
echo >&3
echo "${INDENT}progress_message2 \"$@\"" >&3
echo >&3
}
save_progress_message_short()
{
echo "${INDENT}progress_message \"$@\"" >&3
}
progress_message_and_save()
{
progress_message "$@"
echo "${INDENT}progress_message \"$@\"" >&3
}
#
# Echo the contents of the passed file indented by $INDENT
#
indent() {
if [ -n "$INDENT" ]; then
if [ -n "$HAVEAWK" ]; then
eval awk \''BEGIN { indent=1; }; /^[[:space:]]*$/ { print ""; indent=1; next; }; { if (indent == 1) print "'"$INDENT"'" $0; else print; }; { indent=1; }; /\\$/ { indent=0; };'\' $1
else
eval sed \'s\/^/"$INDENT"\/\' $1
fi
else
cat $1
fi
}
#
# Append a file to the compiler's output with indentation.
#
append_file() # $1 = File Name
{
local user_exit=$(find_file $1)
if [ -f $user_exit ]; then
save_progress_message "Processing $user_exit ..."
indent $user_exit >&3
fi
}
#
# Generate a command to run iptables
#
do_iptables() {
save_command \$IPTABLES $@
}
#
# Generate an IPTABLES command. Include hacks to work around iptables limitations
#
run_iptables() {
if [ -z "$KLUDGEFREE" ]; then
#
# Purge the temporary files that we use to prevent duplicate '-m' specifications
#
[ -n "$BRIDGING" ] && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
[ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
fi
save_command "$IPTABLES_COMMAND $@"
}
#
# Version of 'run_iptables' that inserts white space after "!" in the arg list
#
run_iptables2() {
if [ -z "$KLUDGEFREE" ]; then
#
# Purge the temporary files that we use to prevent duplicate '-m' specifications
#
[ -n "$BRIDGING" ] && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
[ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
fi
save_command run_iptables $(fix_bang $@)
}
#
# Generate command to quietly run iptables
#
qt_iptables() {
if [ -z "$KLUDGEFREE" ]; then
#
# Purge the temporary files that we use to prevent duplicate '-m' specifications
#
[ -n "$BRIDGING" ] && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
[ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
fi
save_command qt \$IPTABLES $@
}
#
# Generate a command to run tc
#
run_tc() {
save_command run_tc $@
}
#
# Add the implicit ACCEPT rules at the end of a rules file section
#
finish_chain_section() # $1 = canonical chain $2 = state list
{
local policy policychain
[ -n "$FASTACCEPT" ] || run_iptables -A $1 -m state --state $2 -j ACCEPT
if list_search RELATED $(separate_list $2) ; then
if is_policy_chain $1 ; then
if eval test -n \"\$${1}_synparams\" ; then
if [ $SECTION = DONE ]; then
eval policy=\$${1}_policy
case $policy in
ACCEPT|CONTINUE|QUEUE)
run_iptables -A $1 -p tcp --syn -j @$1
;;
esac
else
run_iptables -A $1 -p tcp --syn -j @$1
fi
fi
else
eval policychain=\$${1}_policychain
if eval test -n \"\$${policychain}_synparams\" ; then
run_iptables -A $1 -p tcp --syn -j @$policychain
fi
fi
fi
}
finish_section() # $1 = Section(s)
{
local zone zone1 chain
for zone in $ZONES $FW; do
for zone1 in $ZONES $FW; do
chain=${zone}2${zone1}
if havechain $chain; then
finish_chain_section $chain $1
fi
done
done
}
#
# Create a filter chain
#
# If the chain isn't one of the common chains then add a rule to the chain
# allowing packets that are part of an established connection. Create a
# variable exists_${1} and set its value to Yes to indicate that the chain now
# exists.
#
createchain() # $1 = chain name, $2 = If "yes", do section-end processing
{
local c=$(chain_base $1)
run_iptables -N $1
if [ $2 = yes ]; then
case $SECTION in
NEW|DONE)
finish_chain_section $1 ESTABLISHED,RELATED
;;
RELATED)
finish_chain_section $1 ESTABLISHED
;;
esac
fi
eval exists_${c}=Yes
}
createchain2() # $1 = chain name, $2 = If "yes", create default rules
{
local c=$(chain_base $1)
ensurechain $1
if [ $2 = yes ]; then
case $SECTION in
NEW|DONE)
finish_chain_section $1 ESTABLISHED,RELATED
;;
RELATED)
finish_chain_section $1 ESTABLISHED
;;
esac
fi
eval exists_${c}=Yes
}
#
# Determine if a chain exists
#
# When we create a chain "x", we create a variable named exists_x and
# set its value to Yes. This function tests for the "exists_" variable
# corresponding to the passed chain having the value of "Yes".
#
havechain() # $1 = name of chain
{
local c=$(chain_base $1)
eval test \"\$exists_${c}\" = Yes
}
#
# Ensure that a chain exists (create it if it doesn't)
#
ensurechain() # $1 = chain name
{
havechain $1 || createchain $1 yes
}
ensurechain1() # $1 = chain name
{
havechain $1 || createchain $1 no
}
#
# Add a rule to a chain creating the chain if necessary
#
addrule() # $1 = chain name, remainder of arguments specify the rule
{
ensurechain $1
run_iptables -A $@
}
addrule2() # $1 = chain name, remainder of arguments specify the rule
{
ensurechain $1
run_iptables2 -A $@
}
#
# Query NetFilter about the existence of a filter chain
#
chain_exists() # $1 = chain name
{
qt $IPTABLES -L $1 -n
}
#
# Create a mangle chain
#
# Create a variable exists_mangle_${1} and set its value to Yes to indicate that
# the chain now exists.
#
createmanglechain() # $1 = chain name
{
run_iptables -t mangle -N $1
eval exists_mangle_${1}=Yes
}
#
# Determine if a mangle chain exists
#
# When we create a chain "chain", we create a variable named exists_nat_chain
# and set its value to Yes. This function tests for the "exists_" variable
# corresponding to the passed chain having the value of "Yes".
#
havemanglechain() # $1 = name of chain
{
eval test \"\$exists_mangle_${1}\" = Yes
}
#
# Ensure that a mangle chain exists (create it if it doesn't)
#
ensuremanglechain() # $1 = chain name
{
havemanglechain $1 || createmanglechain $1
}
#
# Create a nat chain
#
# Create a variable exists_nat_${1} and set its value to Yes to indicate that
# the chain now exists.
#
createnatchain() # $1 = chain name
{
run_iptables -t nat -N $1
eval exists_nat_${1}=Yes
}
#
# Determine if a nat chain exists
#
# When we create a chain "chain", we create a variable named exists_nat_chain
# and set its value to Yes. This function tests for the "exists_" variable
# corresponding to the passed chain having the value of "Yes".
#
havenatchain() # $1 = name of chain
{
eval test \"\$exists_nat_${1}\" = Yes
}
#
# Ensure that a nat chain exists (create it if it doesn't)
#
ensurenatchain() # $1 = chain name
{
havenatchain $1 || createnatchain $1
}
#
# Add a rule to a nat chain creating the chain if necessary
#
addnatrule() # $1 = chain name, remainder of arguments specify the rule
{
ensurenatchain $1
run_iptables2 -t nat -A $@
}
#
# Create a rule to delete a chain if it exists
#
deletechain() # $1 = name of chain
{
save_command "qt $IPTABLES -L $1 -n && qt $IPTABLES -F $1 && qt $IPTABLES -X $1"
}
#
# Determine if a chain is a policy chain
#
is_policy_chain() # $1 = name of chain
{
eval test \"\$${1}_is_policy\" = Yes
}
#
# Set a standard chain's policy
#
setpolicy() # $1 = name of chain, $2 = policy
{
run_iptables -P $1 $2
}
#
# Set a standard chain to enable established and related connections
#
setcontinue() # $1 = name of chain
{
run_iptables -A $1 -m state --state ESTABLISHED,RELATED -j ACCEPT
}
#
# Flush one of the NAT table chains
#
flushnat() # $1 = name of chain
{
run_iptables -t nat -F $1
}
#
# Flush one of the Mangle table chains
#
flushmangle() # $1 = name of chain
{
run_iptables -t mangle -F $1
}
#
# This function assumes that the TMP_DIR variable is set and that
# its value names an existing directory.
#
determine_zones()
{
local zone parent parents rest new_zone_file= r
merge_zone()
{
local z zones="$ZONES" merged=
if [ -n "$parents" ]; then
ZONES=
for z in $zones; do
if [ -z "$merged" ] && list_search $z $parents; then
ZONES="$ZONES $zone"
merged=Yes
fi
ZONES="$ZONES $z"
done
else
ZONES="$ZONES $zone"
fi
}
strip_file zones
ZONES=
IPV4_ZONES=
IPSEC_ZONES=
[ "$IPSECFILE" = zones ] && new_zone_file=Yes || test -n "${FW:=fw}"
while read zone type rest; do
expandv zone type
case $zone in
*:*)
parents=${zone#*:}
zone=${zone%:*}
[ -n "$zone" ] || fatal_error "Invalid nested zone syntax: :$parents"
parents=$(separate_list $parents)
eval ${zone}_parents=\"$parents\"
;;
*)
parents=
eval ${zone}_parents=
;;
esac
for parent in $parents; do
[ "$parent" = "$FW" ] && fatal_error "Sub-zones of the firewall zone are not allowed"
list_search $parent $ZONES || fatal_error "Parent zone not defined: $parent"
done
[ ${#zone} -gt 5 ] && fatal_error "Zone name longer than 5 characters: $zone"
case "$zone" in
[0-9*])
fatal_error "Illegal zone name \"$zone\" in zones file"
;;
all|none)
fatal_error "Reserved zone name \"$zone\" in zones file"
;;
esac
if [ -n "$new_zone_file" ]; then
case ${type:=ipv4} in
ipv4|IPv4|IPV4|plain|-)
list_search $zone $ZONES $FW && fatal_error "Zone $zone is defined more than once"
merge_zone
IPV4_ZONES="$IPV4_ZONES $zone"
;;
ipsec|IPSEC|ipsec4|IPSEC4)
list_search $zone $ZONES $FW && fatal_error "Zone $zone is defined more than once"
[ -n "$POLICY_MATCH" ] || fatal_error "Your kernel and/or iptables does not support policy match"
eval ${zone}_is_ipsec=Yes
eval ${zone}_is_complex=Yes
merge_zone
IPSEC_ZONES="$IPSEC_ZONES $zone"
;;
firewall)
[ -n "$FW" ] && fatal_error "Only one firewall zone may be defined"
list_search $zone $ZONES && fatal_error "Zone $zone is defined more than once"
[ -n "$parents" ] && fatal_error "The firewall zone may not be nested"
for r in $rest; do
[ "x$r" = x- ] || fatal_error "OPTIONS not allowed on the firewall zone"
done
FW=$zone
;;
*)
fatal_error "Invalid Zone Type: $type"
;;
esac
eval ${zone}_type=$type
else
list_search $zone $ZONES $FW && fatal_error "Zone $zone is defined more than once"
ZONES="$ZONES $zone"
IPV4_ZONES="$IPV4_ZONES $zone"
eval ${zone}_type=ipv4
fi
done < $TMP_DIR/zones
[ -z "$ZONES" ] && fatal_error "No ipv4 or ipsec Zones Defined"
[ -z "$FW" ] && fatal_error "No Firewall Zone Defined"
}
#
# Find interfaces to a given zone
#
# Search the variables representing the contents of the interfaces file and
# for each record matching the passed ZONE, echo the expanded contents of
# the "INTERFACE" column
#
find_interfaces() # $1 = interface zone
{
local zne=$1
local z
local interface
for interface in $ALL_INTERFACES; do
eval z=\$$(chain_base $interface)_zone
[ "x${z}" = x${zne} ] && echo $interface
done
}
#
# Forward Chain for an interface
#
forward_chain() # $1 = interface
{
echo $(chain_base $1)_fwd
}
#
# Input Chain for an interface
#
input_chain() # $1 = interface
{
echo $(chain_base $1)_in
}
#
# Output Chain for an interface
#
output_chain() # $1 = interface
{
echo $(chain_base $1)_out
}
#
# Masquerade Chain for an interface
#
masq_chain() # $1 = interface
{
echo $(chain_base $1)_masq
}
#
# MAC Verification Chain for an interface
#
mac_chain() # $1 = interface
{
echo $(chain_base $1)_mac
}
macrecent_target() # $1 - interface
{
[ -n "$MACLIST_TTL" ] && echo $(chain_base $1)_rec || echo RETURN
}
#
# DNAT Chain from a zone
#
dnat_chain() # $1 = zone
{
echo ${1}_dnat
}
#
# SNAT Chain to an interface
#
snat_chain() # $1 = interface
{
echo $(chain_base $1)_snat
}
#
# ECN Chain to an interface
#
ecn_chain() # $1 = interface
{
echo $(chain_base $1)_ecn
}
#
# First chains for an interface
#
first_chains() #$1 = interface
{
local c=$(chain_base $1)
echo ${c}_fwd ${c}_in
}
#
# Horrible hack to work around an iptables limitation
#
iprange_echo()
{
if [ -n "$KLUDGEFREE" ]; then
echo "-m iprange $@"
elif [ -f $TMP_DIR/iprange ]; then
echo $@
else
echo "-m iprange $@"
> $TMP_DIR/iprange
fi
}
#
# Get set flags (ipsets).
#
get_set_flags() # $1 = set name and optional [levels], $2 = src or dst
{
local temp setname=$1 options=$2
[ -n "$IPSET_MATCH" ] || fatal_error "Your kernel and/or iptables does not include ipset match: $1"
case $1 in
*\[[1-6]\])
temp=${1#*\[}
temp=${temp%\]}
setname=${1%\[*}
while [ $temp -gt 1 ]; do
options="$options,$2"
temp=$(($temp - 1))
done
;;
*\[*\])
options=${1#*\[}
options=${options%\]}
setname=${1%\[*}
;;
*)
;;
esac
echo "--set ${setname#+} $options"
}
#
# Horrible hack to work around an iptables limitation
#
physdev_echo()
{
if [ -n "$KLUDGEFREE" ]; then
echo -m physdev $@
elif [ -f $TMP_DIR/physdev ]; then
echo $@
else
echo -m physdev $@
> $TMP_DIR/physdev
fi
}
#
# We allow hosts to be specified by IP address or by physdev. These two functions
# are used to produce the proper match in a netfilter rule.
#
match_source_hosts()
{
if [ -n "$BRIDGING" ]; then
case $1 in
*:*)
physdev_echo "--physdev-in ${1%:*} $(source_ip_range ${1#*:})"
;;
*.*.*.*|+*|!+*)
echo $(source_ip_range $1)
;;
*)
physdev_echo "--physdev-in $1"
;;
esac
else
echo $(source_ip_range $1)
fi
}
match_dest_hosts()
{
if [ -n "$BRIDGING" ]; then
case $1 in
*:*)
physdev_echo "--physdev-out ${1%:*} $(dest_ip_range ${1#*:})"
;;
*.*.*.*|+*|!+*)
echo $(dest_ip_range $1)
;;
*)
physdev_echo "--physdev-out $1"
;;
esac
else
echo $(dest_ip_range $1)
fi
}
#
# Similarly, the source or destination in a rule can be qualified by a device name. If
# the device is defined in ${CONFDIR}/interfaces then a normal interface match is
# generated (-i or -o); otherwise, a physdev match is generated.
#-------------------------------------------------------------------------------------
#
# loosely match the passed interface with those in ${CONFDIR}/interfaces.
#
known_interface() # $1 = interface name
{
local iface
for iface in $ALL_INTERFACES ; do
if if_match $iface $1 ; then
return 0
fi
done
return 1
}
known_port() # $1 = port name
{
local port
for port in $ALL_PORTS ; do
if if_match $port $1 ; then
return 0
fi
done
return 1
}
match_source_dev()
{
if [ -n "$BRIDGING" ]; then
known_port $1 && physdev_echo "--physdev-in $1" || echo -i $1
elif known_interface $1; then
echo -i $1
elif [ -n "$PHYSDEV_MATCH" ]; then
physdev_echo "--physdev-in $1"
else
echo -i $1
fi
}
match_dest_dev()
{
if [ -n "$BRIDGING" ]; then
known_port $1 && physdev_echo "--physdev-out $1" || echo -o $1
elif known_interface $1; then
echo -o $1
elif [ -n "$PHYSDEV_MATCH" ]; then
physdev_echo "--physdev-out $1"
else
echo -o $1
fi
}
verify_interface()
{
known_interface $1 || { [ -n "$BRIDGING" ] && known_port $1 ; }
}
#
# Determine if communication to/from a host is encrypted using IPSEC
#
is_ipsec_host() # $1 = zone, $2 = host
{
eval local is_ipsec=\$${1}_is_ipsec
eval local hosts=\"\$${1}_ipsec_hosts\"
test -n "$is_ipsec" || list_search $2 $hosts
}
#
# Generate a match for decrypted packets
#
match_ipsec_in() # $1 = zone, $2 = host
{
if is_ipsec_host $1 $2 ; then
eval local options=\"\$${1}_ipsec_options \$${1}_ipsec_in_options\"
echo "-m policy --pol ipsec --dir in $options"
elif [ -n "$POLICY_MATCH" ]; then
echo "-m policy --pol none --dir in"
fi
}
#
# Generate a match for packets that will be encrypted
#
match_ipsec_out() # $1 = zone, $2 = host
{
if is_ipsec_host $1 $2 ; then
eval local options=\"\$${1}_ipsec_options \$${1}_ipsec_out_options\"
echo "-m policy --pol ipsec --dir out $options"
elif [ -n "$POLICY_MATCH" ]; then
echo "-m policy --pol none --dir out"
fi
}
#
# Jacket for ip_range() that takes care of iprange match
#
firewall_ip_range() # $1 = IP address or range
{
[ -n "$IPRANGE_MATCH" ] && echo $1 || ip_range $1
}
#
#
# Find hosts in a given zone
#
# Read hosts file and for each record matching the passed ZONE,
# echo the expanded contents of the "HOST(S)" column
#
find_hosts() # $1 = host zone
{
local hosts interface address addresses
while read z hosts options; do
if [ "x$(expand $z)" = "x$1" ]; then
expandv hosts
interface=${hosts%%:*}
addresses=${hosts#*:}
for address in $(separate_list $addresses); do
echo $interface:$address
done
fi
done < $TMP_DIR/hosts
}
#
# Determine the interfaces on the firewall
#
# For each zone, create a variable called ${zone}_interfaces. This
# variable contains a space-separated list of interfaces to the zone
#
determine_interfaces() {
for zone in $ZONES; do
interfaces=$(find_interfaces $zone)
interfaces=$(echo $interfaces) # Remove extra trash
eval ${zone}_interfaces=\"\$interfaces\"
done
}
#
# Determine if an interface has a given option
#
interface_has_option() # $1 = interface, #2 = option
{
local options
eval options=\$$(chain_base $1)_options
list_search $2 $options
}
#
# Determine the defined hosts in each zone
#
determine_hosts() {
for zone in $ZONES; do
hosts=$(find_hosts $zone)
hosts=$(echo $hosts) # Remove extra trash
eval interfaces=\$${zone}_interfaces
for interface in $interfaces; do
if interface_has_option $interface detectnets; then
networks=$(get_routed_networks $interface)
else
networks=0.0.0.0/0
fi
for network in $networks; do
if [ -z "$hosts" ]; then
hosts=$interface:$network
else
hosts="$hosts $interface:$network"
fi
if interface_has_option $interface routeback; then
eval ${zone}_routeback=\"$interface:$network \$${zone}_routeback\"
fi
done
done
interfaces=
for host in $hosts; do
interface=${host%:*}
if list_search $interface $interfaces; then
list_search $interface:0.0.0.0/0 $hosts && \
fatal_error "Invalid zone definition for zone $zone"
list_search $interface:0/0 $hosts && \
fatal_error "Invalid zone definition for zone $zone"
eval ${zone}_is_complex=Yes
else
if [ -z "$interfaces" ]; then
interfaces=$interface
else
interfaces="$interfaces $interface"
fi
fi
done
eval ${zone}_interfaces="\$interfaces"
eval ${zone}_hosts="\$hosts"
if [ -n "$hosts" ]; then
[ $VERBOSE -ge 1 ] && display_list "$zone Zone:" $hosts
else
error_message "WARNING: Zone $zone is empty"
fi
done
}
#
# Ensure that the passed zone is defined in the zones file or is the firewall
#
validate_zone() # $1 = zone
{
list_search $1 $ZONES $FW
}
#
# Ensure that the passed zone is defined in the zones file.
#
validate_zone1() # $1 = zone
{
list_search $1 $ZONES
}
#
# Validate the zone names and options in the interfaces file
#
validate_interfaces_file() {
local wildcard
local found_obsolete_option=
local z interface networks options r iface option
while read z interface networks options; do
expandv z interface networks options
r="$z $interface $networks $options"
[ "x$z" = "x-" ] && z=
if [ -n "$z" ]; then
validate_zone $z || fatal_error "Invalid zone ($z) in record \"$r\""
fi
list_search $interface $ALL_INTERFACES && \
fatal_error "Duplicate Interface $interface"
wildcard=
case $interface in
*:*|+)
fatal_error "Invalid Interface Name: $interface"
;;
*+)
wildcard=Yes
;;
esac
ALL_INTERFACES="$ALL_INTERFACES $interface"
options=$(separate_list $options)
iface=$(chain_base $interface)
eval ${iface}_broadcast="$networks"
eval ${iface}_zone="$z"
eval ${iface}_options=\"$options\"
for option in $options; do
case $option in
-)
;;
dhcp|tcpflags|arp_filter|routefilter|maclist|logmartians|sourceroute|blacklist|proxyarp|nosmurfs|upnp|-)
;;
norfc1918)
indent >&3 << __EOF__
addr=\$(ip -f inet addr show $interface 2> /dev/null | grep 'inet\ ' | head -n1)
if [ -n "\$addr" ]; then
addr=\$(echo \$addr | sed 's/inet //;s/\/.*//;s/ peer.*//')
for network in 10.0.0.0/8 176.16.0.0/12 192.168.0.0/16; do
if in_network \$addr \$network; then
startup_error "The 'norfc1918' option has been specified on an interface with an RFC 1918 address. Interface:$interface"
fi
done
fi
__EOF__
;;
arp_ignore=*)
eval ${iface}_arp_ignore=${option#*=}
;;
arp_ignore)
eval ${iface}_arp_ignore=1
;;
detectnets)
[ -n "$wildcard" ] && \
fatal_error "The \"detectnets\" option may not be used with a wild-card interface"
[ -n "$EXPORT" ] && \
fatal_error "'detectnets' not permitted with the -e run-line option"
;;
routeback)
[ -n "$z" ] || fatal_error "The routeback option may not be specified on a multi-zone interface"
;;
*)
error_message "WARNING: Invalid option ($option) in record \"$r\""
;;
esac
done
done < $TMP_DIR/interfaces
[ -z "$ALL_INTERFACES" ] && fatal_error "No Interfaces Defined"
}
#
# Process the providers file
#
setup_providers()
{
local table number mark duplicate interface gateway options provider address copy route loose addresses rulenum rulebase echobin=$(mywhich echo) balance save_indent="$INDENT" mask= first=Yes save_indent1=
copy_table() {
indent >&3 << __EOF__
ip route show table $duplicate | while read net route; do
case \$net in
default|nexthop)
;;
*)
run_ip route add table $number \$net \$route
;;
esac
done
__EOF__
}
copy_and_edit_table() {
indent >&3 << __EOF__
ip route show table $duplicate | while read net route; do
case \$net in
default|nexthop)
;;
*)
case \$(find_device \$route) in
`echo $copy\) | sed 's/ /|/g'`
run_ip route add table $number \$net \$route
;;
esac
;;
esac
done
__EOF__
}
balance_default_route() # $1 = weight
{
balance=yes
save_command
if [ -n "$first" ]; then
if [ -n "$gateway" ] ; then
save_command "DEFAULT_ROUTE=\"nexthop via $gateway dev $interface weight $1\""
else
save_command "DEFAULT_ROUTE=\"nexthop dev $interface weight $1\""
fi
first=
else
if [ -n "$gateway" ] ; then
save_command "DEFAULT_ROUTE=\"\$DEFAULT_ROUTE nexthop via $gateway dev $interface weight $1\""
else
save_command "DEFAULT_ROUTE=\"\$DEFAULT_ROUTE nexthop dev $interface weight $1\""
fi
fi
}
add_a_provider() {
local t n iface option optional=
[ -n "$MANGLE_ENABLED" ] || fatal_error "Providers require mangle support in your kernel and iptables"
for t in $PROVIDERS local main default unspec; do
if [ "$t" = "$table" ]; then
fatal_error "Duplicate Provider: $table, provider: \"$provider\""
fi
eval n=\$${t}_number
#
# The following is because the %$#@ shell doesn't accept hex numbers in '-eq' tests
#
if [ $(($n)) -eq $(($number)) ]; then
fatal_error "Duplicate Provider number: $number, provider: \"$provider\""
fi
done
eval ${table}_number=$number
indent >&3 << __EOF__
#
# Add Provider $table ($number)
#
__EOF__
save_command "if [ \"\$(find_first_interface_address_if_any $interface)\" != 0.0.0.0 ]; then"
save_indent1="$INDENT"
INDENT="$INDENT "
iface=$(chain_base $interface)
save_command "${iface}_up=Yes"
save_command "qt ip route flush table $number"
if [ "x${duplicate:=-}" != x- ]; then
if [ "x${copy:=-}" != "x-" ]; then
if [ "x${copy}" = xnone ]; then
copy=$interface
else
copy="$interface $(separate_list $copy)"
fi
copy_and_edit_table
else
copy_table
fi
fi
if [ "x$gateway" = xdetect ] ; then
gateway='$gateway'
indent >&3 << __EOF__
gateway=\$(detect_gateway $interface)
if [ -n "\$gateway" ]; then
run_ip route replace \$gateway src \$(find_first_interface_address $interface) dev $interface table $number
run_ip route add default via \$gateway dev $interface table $number
else
fatal_error "Unable to detect the gateway through interface $interface"
fi
__EOF__
elif [ "x$gateway" != "x-" -a -n "$gateway" ]; then
indent >&3 << __EOF__
run_ip route replace $gateway src \$(find_first_interface_address $interface) dev $interface table $number
run_ip route add default via $gateway dev $interface table $number
__EOF__
else
gateway=
save_command "run_ip route add default dev $interface table $number"
fi
if [ x${mark} != x- ]; then
verify_mark $mark
if [ $(($mark)) -lt 256 ]; then
if [ -n "$HIGH_ROUTE_MARKS" ]; then
fatal_error "Invalid Mark Value ($mark) with HIGH_ROUTE_MARKS=Yes"
fi
elif [ -z "$HIGH_ROUTE_MARKS" ]; then
fatal_error "Invalid Mark Value ($mark) with HIGH_ROUTE_MARKS=No"
fi
eval ${table}_mark=$mark
save_command "qt ip rule del fwmark $mark"
save_command "run_ip rule add fwmark $mark pref $((10000 + $mark)) table $number"
fi
loose=
for option in $(separate_list $options); do
case $option in
-)
;;
track)
list_search $interface $ROUTEMARK_INTERFACES && \
fatal_error "Interface $interface is tracked through an earlier provider"
[ x${mark} = x- ] && fatal_error "The 'track' option requires a numeric value in the MARK column - Provider \"$provider\""
eval ${iface}_routemark=$mark
ROUTEMARK_INTERFACES="$ROUTEMARK_INTERFACES $interface"
;;
balance=*)
balance_default_route ${option#*=}
;;
balance)
balance_default_route 1
;;
loose)
loose=Yes
;;
optional)
optional=Yes
;;
*)
error_message "WARNING: Invalid option ($option) ignored in provider \"$provider\""
;;
esac
done
rulenum=0
if [ -z "$loose" ]; then
rulebase=$(( 20000 + ( 256 * ($number-1) ) ))
indent >&3 << __EOF__
rulenum=0
find_interface_addresses $interface | while read address; do
qt ip rule del from \$address
run_ip rule add from \$address pref \$(( $rulebase + \$rulenum )) table $number
rulenum=\$((\$rulenum + 1))
done
__EOF__
else
indent >&3 << __EOF__
find_interface_addresses $interface | while read address; do
qt ip rule del from \$address
done
__EOF__
fi
indent >&3 << __EOF__
progress_message " Provider $table ($number) Added"
__EOF__
INDENT="$save_indent1"
save_command else
if [ -n "$optional" ]; then
save_command " error_message \"WARNING: Interface $interface is not configured -- Provider $table ($number) not Added\""
save_command " ${iface}_up="
else
save_command " fatal_error \"ERROR: Interface $interface is not configured -- Provider $table ($number) Cannot be Added\""
fi
save_command fi
save_command
}
verify_provider()
{
local p n
for p in $PROVIDERS main; do
[ "$p" = "$1" ] && return 0
eval n=\$${p}_number}
[ "$n" = "$1" ] && return 0
done
fatal_error "Unknown provider $1 in route rule \"$rule\""
}
add_an_rtrule()
{
verify_provider $provider
[ "x$source" = x- ] && source=
[ "x$dest" = x- ] && dest= || dest="to $dest"
[ -n "${source}${dest}" ] || fatal_error "You must specify either the source or destination in an rt rule: \"$rule\""
[ -n "$source" ] && case $source in
*:*)
source="iif ${source%:*} from ${source#*:}"
;;
*.*.*)
source="from $source"
;;
*)
source="iif $source"
;;
esac
case "$priority" in
[0-9][0-9][0-9][0-9]|[0-9][0-9][0-9][0-9][0-9])
;;
*)
fatal_error "Invalid priority ($priority) in rule \"$rule\""
;;
esac
priority="priority $priority"
save_command "qt ip rule del $source $dest $priority"
save_command "run_ip rule add $source $dest $priority table $provider"
progress_message "Routing rule \"$rule\" $DONE"
}
local_number=255
main_number=254
default_number=253
unspec_number=0
strip_file providers $1
if [ -s $TMP_DIR/providers ]; then
balance=
progress_message2 "$DOING $1..."
save_command
save_command "if [ -z \"\$NOROUTES\" ]; then"
INDENT="$INDENT "
save_progress_message "Adding Providers..."
save_command "DEFAULT_ROUTE="
while read table number mark duplicate interface gateway options copy; do
expandv table number mark duplicate interface gateway options copy
provider="$table $number $mark $duplicate $interface $gateway $options $copy"
add_a_provider
PROVIDERS="$PROVIDERS $table"
progress_message "Provider $provider $DONE"
done < $TMP_DIR/providers
if [ -n "$PROVIDERS" ]; then
if [ -n "$balance" ]; then
save_command "if [ -n \"\$DEFAULT_ROUTE\" ]; then"
save_command " run_ip route replace default scope global \$DEFAULT_ROUTE"
save_command " progress_message \"Default route '\$(echo \$DEFAULT_ROUTE | sed 's/\$\\s*//')' Added\""
save_command "else"
save_command " error_message \"WARNING: No Default route added (all 'balance' providers are down)\""
save_command "fi"
save_command
fi
cat >&3 << __EOF__
${INDENT}cat > /etc/iproute2/rt_tables <<EOF
#
# reserved values
#
255 local
254 main
253 default
0 unspec
#
# local
#
EOF
__EOF__
for table in $PROVIDERS; do
eval number=\$${table}_number
indent >&3 << __EOF__
\${echobin:-echo} -e "$number\t$table" >> /etc/iproute2/rt_tables
__EOF__
done
f=$(find_file route_rules)
if [ -f $f ]; then
strip_file route_rules $f
if [ -s $TMP_DIR/route_rules ]; then
progress_message2 "$DOING $f..."
save_command
while read source dest provider priority; do
expandv source dest provider priority
rule="$source $dest $priority $provider"
add_an_rtrule
done < $TMP_DIR/route_rules
fi
fi
fi
save_command "run_ip route flush cache"
INDENT="$save_indent"
save_command "fi"
save_command
fi
}
#
# Validate the zone names and options in the hosts file
#
validate_hosts_file() {
local z hosts options r interface host option zports
check_bridge_port()
{
list_search ${interface}:${1} $zports || zports="$zports ${interface}:${1}"
list_search $1 $ALL_PORTS || ALL_PORTS="$ALL_PORTS $1"
}
while read z hosts options; do
expandv z hosts options
r="$z $hosts $options"
validate_zone1 $z || fatal_error "Invalid zone ($z) in record \"$r\""
case $hosts in
*:*)
interface=${hosts%%:*}
iface=$(chain_base $interface)
list_search $interface $ALL_INTERFACES || \
fatal_error "Unknown interface ($interface) in record \"$r\""
hosts=${hosts#*:}
;;
*)
fatal_error "Invalid HOST(S) column contents: $hosts"
;;
esac
eval zports=\$${z}_ports
for host in $(separate_list $hosts); do
if [ -n "$BRIDGING" ]; then
case $host in
*:*)
known_interface ${host%:*} && \
fatal_error "Bridged interfaces may not be defined in ${CONFDIR}/interfaces: $host"
check_bridge_port ${host%%:*}
;;
*.*.*)
;;
*+|+*)
eval ${z}_is_complex=Yes
;;
*)
known_interface $host && \
fatal_error "Bridged interfaces may not be defined in ${CONFDIR}/interfaces: $host"
check_bridge_port $host
;;
esac
else
case $host in
*.*.*)
;;
*+)
eval ${z}_is_complex=Yes
;;
*)
fatal_error "BRIDGING=Yes is needed for this zone definition: $r"
;;
esac
fi
for option in $(separate_list $options) ; do
case $option in
norfc1918|blacklist|maclist|tcpflags|nosmurfs|-)
;;
ipsec)
[ -n "$POLICY_MATCH" ] || \
fatal_error "Your kernel and/or iptables does not support policy match: ipsec"
eval ${z}_ipsec_hosts=\"\$${z}_ipsec_hosts $interface:$host\"
eval ${z}_is_complex=Yes
;;
routeback)
eval ${z}_routeback=\"$interface:$host \$${z}_routeback\"
;;
*)
error_message "WARNING: Invalid option ($option) in record \"$r\""
;;
esac
done
done
[ -n "$zports" ] && eval ${z}_ports=\"$zports\"
done < $TMP_DIR/hosts
[ -n "$ALL_PORTS" ] && progress_message2 " Bridge ports are: $ALL_PORTS"
}
#
# Format a match by the passed MAC address
# The passed address begins with "~" and uses "-" as a separator between bytes
# Example: ~01-02-03-04-05-06
#
mac_match() # $1 = MAC address formated as described above
{
echo "--match mac --mac-source $(echo $1 | sed 's/~//;s/-/:/g')"
}
#
# validate the policy file
#
validate_policy()
{
local clientwild
local serverwild
local zone
local zone1
local pc
local chain
local policy
local loglevel
local synparams
local parents
print_policy() # $1 = source zone, $2 = destination zone
{
[ $1 = $2 ] || \
[ $1 = all ] || \
[ $2 = all ] || \
progress_message " Policy for $1 to $2 is $policy using chain $chain"
}
ALL_POLICY_CHAINS=
for zone in $ZONES $FW; do
chain=${zone}2${zone}
eval ${chain}_is_policy=Yes
eval ${chain}_is_optional=Yes
eval ${chain}_policy=ACCEPT
eval ${chain}_policychain=$chain
ALL_POLICY_CHAINS="$ALL_POLICY_CHAINS $chain"
if [ -n "$IMPLICIT_CONTINUE" ]; then
eval parents=\$${zone}_parents
if [ -n "$parents" ]; then
for zone1 in $ZONES $FW; do
chain=${zone}2${zone1}
eval ${chain}_is_policy=Yes
eval ${chain}_is_optional=Yes
eval ${chain}_policy=CONTINUE
eval ${chain}_policychain=$chain
ALL_POLICY_CHAINS="$ALL_POLICY_CHAINS $chain"
chain=${zone1}2${zone}
eval ${chain}_is_policy=Yes
eval ${chain}_is_optional=Yes
eval ${chain}_policy=CONTINUE
eval ${chain}_policychain=$chain
ALL_POLICY_CHAINS="$ALL_POLICY_CHAINS $chain"
done
fi
fi
done
strip_file policy
while read client server policy loglevel synparams; do
expandv client server policy loglevel synparams
clientwild=
serverwild=
case "$client" in
all|ALL)
clientwild=Yes
;;
*)
if ! validate_zone $client; then
fatal_error "Undefined zone $client"
fi
esac
case "$server" in
all|ALL)
serverwild=Yes
;;
*)
if ! validate_zone $server; then
fatal_error "Undefined zone $server"
fi
esac
case $policy in
ACCEPT|REJECT|DROP|CONTINUE|QUEUE)
;;
NONE)
[ "$client" = "$FW" -o "$server" = "$FW" ] && \
fatal_error " $client $server $policy $loglevel $synparams: NONE policy not allowed to/from the $FW zone"
[ -n "$clientwild" -o -n "$serverwild" ] && \
fatal_error " $client $server $policy $loglevel $synparams: NONE policy not allowed with \"all\""
;;
*)
fatal_error "Invalid policy $policy"
;;
esac
chain=${client}2${server}
if is_policy_chain $chain ; then
if eval test -n \"\$${chain}_is_optional\" ; then
eval ${chain}_is_optional=
else
fatal_error "Duplicate policy: $client $server $policy"
fi
fi
[ "x$loglevel" = "x-" ] && loglevel=
[ "x$synparams" = "x-" ] && synparams=
[ $policy = NONE ] || ALL_POLICY_CHAINS="$ALL_POLICY_CHAINS $chain"
eval ${chain}_is_policy=Yes
eval ${chain}_policy=$policy
eval ${chain}_loglevel=$loglevel
eval ${chain}_synparams=$synparams
if [ -n "${clientwild}" ]; then
if [ -n "${serverwild}" ]; then
for zone in $ZONES $FW all; do
for zone1 in $ZONES $FW all; do
eval pc=\$${zone}2${zone1}_policychain
if [ -z "$pc" ]; then
eval ${zone}2${zone1}_policychain=$chain
eval ${zone}2${zone1}_policy=$policy
print_policy $zone $zone1
fi
done
done
else
for zone in $ZONES $FW all; do
eval pc=\$${zone}2${server}_policychain
if [ -z "$pc" ]; then
eval ${zone}2${server}_policychain=$chain
eval ${zone}2${server}_policy=$policy
print_policy $zone $server
fi
done
fi
elif [ -n "$serverwild" ]; then
for zone in $ZONES $FW all; do
eval pc=\$${client}2${zone}_policychain
if [ -z "$pc" ]; then
eval ${client}2${zone}_policychain=$chain
eval ${client}2${zone}_policy=$policy
print_policy $client $zone
fi
done
else
eval ${chain}_policychain=${chain}
print_policy $client $server
fi
done < $TMP_DIR/policy
}
#
# Find broadcast addresses -- if we are compiling a script and 'detect' is specified for an interface
# the function returns nothing for that interface
#
find_broadcasts() {
for interface in $ALL_INTERFACES; do
eval bcast=\$$(chain_base $interface)_broadcast
if [ "x$bcast" != "xdetect" -a "x${bcast}" != "x-" ]; then
echo $(separate_list $bcast)
fi
done
}
#
# Find interfaces with BROADCAST=detect -- Only returns information if we are compiling a script
#
find_bcastdetect_interfaces() {
for interface in $ALL_INTERFACES; do
eval bcast=\$$(chain_base $interface)_broadcast
[ "x$bcast" = "xdetect" ] && echo $interface
done
}
#
# Find interfaces that have the passed option specified
#
find_interfaces_by_option() # $1 = option
{
for interface in $ALL_INTERFACES; do
eval options=\$$(chain_base $interface)_options
list_search $1 $options && echo $interface
done
}
#
# This slightly slower version is used to find both the option and option followed
# by equal sign ("=") and a value
#
find_interfaces_by_option1() # $1 = option
{
local options option
for interface in $ALL_INTERFACES; do
eval options=\$$(chain_base $interface)_options
for option in $options; do
if [ "${option%=*}" = "$1" ]; then
echo $interface
break
fi
done
done
}
#
# Find hosts with the passed option
#
find_hosts_by_option() # $1 = option
{
local ignore hosts interface address addresses options ipsec= list
while read ignore hosts options; do
expandv options
list=$(separate_list $options)
if list_search $1 $list; then
list_search ipsec $list && ipsec=ipsec || ipsec=none
expandv hosts
interface=${hosts%%:*}
addresses=${hosts#*:}
for address in $(separate_list $addresses); do
echo ${ipsec}^$interface:$address
done
fi
done < $TMP_DIR/hosts
for interface in $ALL_INTERFACES; do
interface_has_option $interface $1 && \
echo none^${interface}:0.0.0.0/0
done
}
#
# Flush and delete all user-defined chains in the filter table
#
deleteallchains() {
run_iptables -F
run_iptables -X
}
#
# Set /proc/sys/net/ipv4/ip_forward based on $IP_FORWARDING
#
setup_forwarding() {
progress_message2 "Compiling IP Forwarding..."
case "$IP_FORWARDING" in
[Oo][Nn])
save_progress_message "IP Forwarding Enabled"
save_command "echo 1 > /proc/sys/net/ipv4/ip_forward"
;;
[Oo][Ff][Ff])
save_progress_message "IP Forwarding Disabled!"
save_command "echo 0 > /proc/sys/net/ipv4/ip_forward"
;;
esac
}
#
# Process the routestopped file either adding or deleting rules
#
process_routestopped() # $1 = command
{
local hosts= interface host host1 options networks source= dest= matched
while read interface host options; do
expandv interface host options
[ "x$host" = "x-" -o -z "$host" ] && host=0.0.0.0/0
for h in $(separate_list $host); do
hosts="$hosts $interface:$h"
done
routeback=
if [ -n "$options" ]; then
for option in $(separate_list $options); do
case $option in
routeback)
if [ -n "$routeback" ]; then
error_message "WARNING: Duplicate routestopped option ignored: routeback"
else
routeback=Yes
for h in $(separate_list $host); do
run_iptables $1 FORWARD -i $interface -o $interface $(both_ip_ranges $h $h) -j ACCEPT
done
fi
;;
source)
for h in $(separate_list $host); do
source="$source $interface:$h"
done
;;
dest)
for h in $(separate_list $host); do
dest="$dest $interface:$h"
done
;;
critical)
;;
*)
error_message "WARNING: Unknown routestopped option ignored: $option"
;;
esac
done
fi
done < $TMP_DIR/routestopped
for host in $hosts; do
interface=${host%:*}
networks=${host#*:}
source_range=$(source_ip_range $networks)
dest_range=$(dest_ip_range $networks)
run_iptables $1 INPUT -i $interface $source_range -j ACCEPT
[ -z "$ADMINISABSENTMINDED" ] && \
run_iptables $1 OUTPUT -o $interface $dest_range -j ACCEPT
matched=
if list_search $host $source ; then
run_iptables $1 FORWARD -i $interface $source_range -j ACCEPT
matched=Yes
fi
if list_search $host $dest ; then
run_iptables $1 FORWARD -o $interface $dest_range -j ACCEPT
matched=Yes
fi
if [ -z "$matched" ]; then
for host1 in $hosts; do
[ "$host" != "$host1" ] && run_iptables $1 FORWARD -i $interface -o ${host1%:*} $(both_ip_ranges $networks ${host1#*:}) -j ACCEPT
done
fi
done
}
process_criticalhosts()
{
local hosts= interface host h options networks criticalhosts=
[ -f $TMP_DIR/routestopped ] || strip_file routestopped
while read interface host options; do
expandv interface host options
[ "x$host" = "x-" -o -z "$host" ] && host=0.0.0.0/0 || host=$(separate_list $host)
if [ -n "$options" ]; then
for option in $(separate_list $options); do
case $option in
routeback|source|dest)
;;
critical)
for h in $host; do
criticalhosts="$criticalhosts $interface:$h"
done
;;
*)
error_message "WARNING: Unknown routestopped option ignored: $option"
;;
esac
done
fi
done < $TMP_DIR/routestopped
if [ -n "$criticalhosts" ]; then
CRITICALHOSTS=$criticalhosts
progress_message "Critical Hosts are:$CRITICALHOSTS"
fi
}
#
# For each entry in the CRITICALHOSTS global list, add INPUT and OUTPUT rules to
# enable traffic to/from those hosts.
#
enable_critical_hosts()
{
for host in $CRITICALHOSTS; do
interface=${host%:*}
networks=${host#*:}
do_iptables -A INPUT -i $interface $(source_ip_range $networks) -j ACCEPT
do_iptables -A OUTPUT -o $interface $(dest_ip_range $networks) -j ACCEPT
done
}
#
# For each entry in the CRITICALHOSTS global list, delete the INPUT and OUTPUT rules that
# enable traffic to/from those hosts.
#
disable_critical_hosts()
{
for host in $CRITICALHOSTS; do
interface=${host%:*}
networks=${host#*:}
do_iptables -D INPUT -i $interface $(source_ip_range $networks) -j ACCEPT
do_iptables -D OUTPUT -o $interface $(dest_ip_range $networks) -j ACCEPT
done
}
#
# Set up ipsec tunnels
#
setup_tunnels() # $1 = name of tunnels file
{
local inchain
local outchain
local source
local dest
setup_one_ipsec() # $1 = Tunnel Kind $2 = gateway zones
{
local kind=$1 noah=
case $kind in
*:*)
noah=${kind#*:}
[ $noah = noah -o $noah = NOAH ] || fatal_error "Invalid IPSEC modifier $noah in tunnel \"$tunnel\""
kind=${kind%:*}
;;
esac
[ $kind = IPSEC ] && kind=ipsec
options="-m state --state NEW -j ACCEPT"
addrule2 $inchain -p 50 $source -j ACCEPT
addrule2 $outchain -p 50 $dest -j ACCEPT
if [ -z "$noah" ]; then
run_iptables -A $inchain -p 51 $source -j ACCEPT
run_iptables -A $outchain -p 51 $dest -j ACCEPT
fi
run_iptables -A $outchain -p udp $dest --dport 500 $options
if [ $kind = ipsec ]; then
run_iptables -A $inchain -p udp $source --dport 500 $options
else
run_iptables -A $inchain -p udp $source --dport 500 $options
run_iptables -A $inchain -p udp $source --dport 4500 $options
fi
for z in $(separate_list $2); do
if validate_zone $z; then
if [ -z "$POLICY_MATCH" ]; then
addrule ${z}2${FW} -p 50 $source -j ACCEPT
addrule ${FW}2${z} -p 50 $dest -j ACCEPT
if [ -z "$noah" ]; then
addrule ${z}2${FW} -p 51 $source -j ACCEPT
addrule ${FW}2${z} -p 51 $dest -j ACCEPT
fi
fi
if [ $kind = ipsec ]; then
addrule ${z}2${FW} -p udp $source --dport 500 $options
addrule ${FW}2${z} -p udp $dest --dport 500 $options
else
addrule ${z}2${FW} -p udp $source --dport 500 $options
addrule ${FW}2${z} -p udp $dest --dport 500 $options
addrule ${z}2${FW} -p udp $source --dport 4500 $options
addrule ${FW}2${z} -p udp $dest --dport 4500 $options
fi
else
fatal_error "Invalid gateway zone ($z) -- Tunnel \"$tunnel\""
fi
done
progress_message_and_save " IPSEC tunnel to $gateway defined."
}
setup_one_other() # $1 = TYPE, $2 = protocol
{
addrule2 $inchain -p $2 $source -j ACCEPT
addrule2 $outchain -p $2 $dest -j ACCEPT
progress_message_and_save " $1 tunnel to $gateway compiled."
}
setup_pptp_client()
{
addrule2 $outchain -p 47 $dest -j ACCEPT
addrule2 $inchain -p 47 $source -j ACCEPT
addrule2 $outchain -p tcp --dport 1723 $dest -j ACCEPT
progress_message_and_save " PPTP tunnel to $gateway defined."
}
setup_pptp_server()
{
addrule2 $inchain -p 47 $source -j ACCEPT
addrule2 $outchain -p 47 $dest -j ACCEPT
addrule2 $inchain -p tcp --dport 1723 $source -j ACCEPT
progress_message_and_save " PPTP server defined."
}
setup_one_openvpn() # $1 = kind[:port]
{
local protocol=udp
local p=1194
case $1 in
*:*:*)
protocol=${1%:*}
protocol=${protocol#*:}
p=${1##*:}
;;
*:tcp|*:udp|*:TCP|*:UDP)
protocol=${1#*:}
;;
*:*)
p=${1#*:}
;;
esac
addrule2 $inchain -p $protocol $source --dport $p -j ACCEPT
addrule2 $outchain -p $protocol $dest --dport $p -j ACCEPT
progress_message_and_save " OPENVPN tunnel to $gateway:$protocol:$p defined."
}
setup_one_openvpn_server() # $1 = kind[:port]
{
local protocol=udp
local p=1194
case $1 in
*:*:*)
protocol=${1%:*}
protocol=${protocol#*:}
p=${1##*:}
;;
*:tcp|*:udp|*:TCP|*:UDP)
protocol=${1#*:}
;;
*:*)
p=${1#*:}
;;
esac
addrule2 $inchain -p $protocol $source --dport $p -j ACCEPT
addrule2 $outchain -p $protocol $dest --sport $p -j ACCEPT
progress_message_and_save " OPENVPN server tunnel from $gateway:$protocol:$p defined."
}
setup_one_openvpn_client() # $1 = kind[:port]
{
local protocol=udp
local p=1194
case $1 in
*:*:*)
protocol=${1%:*}
protocol=${protocol#*:}
p=${1##*:}
;;
*:tcp|*:udp|*:TCP|*:UDP)
protocol=${1#*:}
;;
*:*)
p=${1#*:}
;;
esac
addrule2 $inchain -p $protocol $source --sport $p -j ACCEPT
addrule2 $outchain -p $protocol $dest --dport $p -j ACCEPT
progress_message_and_save " OPENVPN client tunnel to $gateway:$protocol:$p defined."
}
setup_one_generic() # $1 = kind:protocol[:port]
{
local protocol
local p=
case $1 in
*:*:*)
p=${1##*:}
protocol=${1%:*}
protocol=${protocol#*:}
;;
*:*)
protocol=${1#*:}
;;
*)
protocol=udp
p=5000
;;
esac
p=${p:+--dport $p}
addrule2 $inchain -p $protocol $source $p -j ACCEPT
addrule2 $outchain -p $protocol $dest $p -j ACCEPT
progress_message_and_save " GENERIC tunnel to $1:$p defined."
}
strip_file tunnels $1
while read kind z gateway z1; do
expandv kind z gateway z1
tunnel="$(echo $kind $z $gateway $z1)"
if validate_zone $z; then
inchain=${z}2${FW}
outchain=${FW}2${z}
gateway=${gateway:-0.0.0.0/0}
source=$(source_ip_range $gateway)
dest=$(dest_ip_range $gateway)
case $kind in
ipsec|IPSEC|ipsec:*|IPSEC:*)
setup_one_ipsec $kind $z1
;;
ipsecnat|IPSECNAT|ipsecnat:*|IPSECNAT:*)
setup_one_ipsec $kind $z1
;;
ipip|IPIP)
setup_one_other IPIP 4
;;
gre|GRE)
setup_one_other GRE 47
;;
6to4|6TO4)
setup_one_other 6to4 41
;;
pptpclient|PPTPCLIENT)
setup_pptp_client
;;
pptpserver|PPTPSERVER)
setup_pptp_server
;;
openvpn|OPENVPN|openvpn:*|OPENVPN:*)
setup_one_openvpn $kind
;;
openvpnclient|OPENVPNCLIENT|openvpnclient:*|OPENVPNCLIENT:*)
setup_one_openvpn_client $kind
;;
openvpnserver|OPENVPNSERVER|openvpnserver:*|OPENVPNSERVER:*)
setup_one_openvpn_server $kind
;;
generic:*|GENERIC:*)
setup_one_generic $kind
;;
*)
error_message "WARNING: Tunnels of type $kind are not supported:" \
"Tunnel \"$tunnel\" Ignored"
;;
esac
else
error_message "ERROR: Invalid gateway zone ($z)" \
" -- Tunnel \"$tunnel\" Ignored"
fi
done < $TMP_DIR/tunnels
}
#
# Process the ipsec information in the zones file
#
setup_ipsec() {
local zone using_ipsec=
#
# Add a --set-mss rule to the passed chain
#
set_mss1() # $1 = chain, $2 = MSS
{
eval local policy=\$${1}_policy
if [ "$policy" != NONE ]; then
ensurechain $1
run_iptables -I $1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --set-mss $2
fi
}
#
# Set up rules to set MSS to and/or from zone "$zone"
#
set_mss() # $1 = MSS value, $2 = _in, _out or ""
{
for z in $ZONES; do
case $2 in
_in)
set_mss1 ${zone}2${z} $1
;;
_out)
set_mss1 ${z}2${zone} $1
;;
*)
set_mss1 ${z}2${zone} $1
set_mss1 ${zone}2${z} $1
;;
esac
done
}
do_options() # $1 = _in, _out or "" - $2 = option list
{
local option newoptions= val
[ x${2} = x- ] && return
for option in $(separate_list $2); do
val=${option#*=}
case $option in
mss=[0-9]*) set_mss $val $1 ;;
strict) newoptions="$newoptions --strict" ;;
next) newoptions="$newoptions --next" ;;
reqid=*) newoptions="$newoptions --reqid $val" ;;
spi=*) newoptions="$newoptions --spi $val" ;;
proto=*) newoptions="$newoptions --proto $val" ;;
mode=*) newoptions="$newoptions --mode $val" ;;
tunnel-src=*) newoptions="$newoptions --tunnel-src $val" ;;
tunnel-dst=*) newoptions="$newoptions --tunnel-dst $val" ;;
reqid!=*) newoptions="$newoptions ! --reqid $val" ;;
spi!=*) newoptions="$newoptions ! --spi $val" ;;
proto!=*) newoptions="$newoptions ! --proto $val" ;;
mode!=*) newoptions="$newoptions ! --mode $val" ;;
tunnel-src!=*) newoptions="$newoptions ! --tunnel-src $val" ;;
tunnel-dst!=*) newoptions="$newoptions ! --tunnel-dst $val" ;;
*) fatal_error "Invalid option \"$option\" for zone $zone" ;;
esac
done
if [ -n "$newoptions" ]; then
[ -n "$POLICY_MATCH" ] || fatal_error "Your kernel and/or iptables does not support policy match"
eval ${zone}_is_complex=Yes
eval ${zone}_ipsec${1}_options=\"${newoptions# }\"
fi
}
case $IPSECFILE in
zones)
f=zones
progress_message2 "$DOING IPSEC..."
;;
*)
f=$IPSECFILE
strip_file $f
progress_message2 "$DOING $f..."
using_ipsec=Yes
;;
esac
while read zone type options in_options out_options mss; do
expandv zone type options in_options out_options mss
if [ -n "$using_ipsec" ]; then
validate_zone1 $zone || fatal_error "Unknown zone: $zone"
fi
if [ -n "$type" ]; then
if [ -n "$using_ipsec" ]; then
case $type in
No|no)
;;
Yes|yes)
[ -n "$POLICY_MATCH" ] || fatal_error "Your kernel and/or iptables does not support policy match"
eval ${zone}_is_ipsec=Yes
eval ${zone}_is_complex=Yes
eval ${zone}_type=ipsec4
;;
*)
fatal_error "Invalid IPSEC column contents"
;;
esac
fi
do_options "" $options
do_options "_in" $in_options
do_options "_out" $out_options
fi
done < $TMP_DIR/$f
}
##
# Setup Proxy ARP
#
setup_proxy_arp() {
local setlist= resetlist=
print_error() {
error_message "Invalid value for HAVEROUTE - ($haveroute)"
error_message "Entry \"$address $interface $external $haveroute\" ignored"
}
print_error1() {
error_message "Invalid value for PERSISTENT - ($persistent)"
error_message "Entry \"$address $interface $external $haveroute $persistent\" ignored"
}
print_warning() {
error_message "PERSISTENT setting ignored - ($persistent)"
error_message "Entry \"$address $interface $external $haveroute $persistent\""
}
setup_one_proxy_arp() {
case $haveroute in
[Nn][Oo])
haveroute=
;;
[Yy][Ee][Ss])
;;
*)
if [ -n "$haveroute" ]; then
print_error
return
fi
;;
esac
case $persistent in
[Nn][Oo])
persistent=
;;
[Yy][Ee][Ss])
[ -z "$haveroute" ] || print_warning
;;
*)
if [ -n "$persistent" ]; then
print_error1
return
fi
;;
esac
if [ -z "$haveroute" ]; then
save_command "[ -n \"\$NOROUTES\" ] || run_ip route replace $address dev $interface"
[ -n "$persistent" ] && haveroute=yes
fi
indent >&3 << __EOF__
if ! arp -i $external -Ds $address $external pub; then
fatal_error "Command \"arp -i $external -Ds $address $external pub\" failed"
fi
progress_message " Host $address connected to $interface added to ARP on $external"
__EOF__
echo $address $interface $external $haveroute >> $STATEDIR/proxyarp
progress_message " Host $address connected to $interface added to ARP on $external"
}
> $STATEDIR/proxyarp
save_progress_message "Setting up Proxy ARP..."
while read address interface external haveroute persistent; do
expandv address interface external haveroute persistent
list_search $interface $setlist || setlist="$setlist $interface"
list_search $external $resetlist || list_search $external $setlist || resetlist="$resetlist $external"
setup_one_proxy_arp
done < $TMP_DIR/proxyarp
for interface in $resetlist; do
list_search $interface $setlist || \
save_command "echo 0 > /proc/sys/net/ipv4/conf/$interface/proxy_arp"
done
for interface in $setlist; do
save_command "echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp"
done
interfaces=$(find_interfaces_by_option proxyarp)
for interface in $interfaces; do
indent >&3 << __EOF__
if [ -f /proc/sys/net/ipv4/conf/$interface/proxy_arp ] ; then
echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp
else
error_message "WARNING: Unable to enable proxy ARP on $interface"
fi
__EOF__
done
}
#
# Set up MAC Verification
#
setup_mac_lists() {
local interface
local mac
local addresses
local address
local chain
local chain1
local macpart
local blob
local hosts
local ipsec
local policy=
create_mac_chain()
{
case $MACLIST_TABLE in
filter)
createchain $1 no
;;
*)
createmanglechain $1
;;
esac
}
have_mac_chain()
{
local result
case $MACLIST_TABLE in
filter)
havechain $1 && result=0 || result=1
;;
*)
havemanglechain $1 && result=0 || result=1
;;
esac
return $result
}
#
# Generate the list of interfaces having MAC verification
#
maclist_interfaces=
for hosts in $maclist_hosts; do
hosts=${hosts#*^}
interface=${hosts%%:*}
if ! list_search $interface $maclist_interfaces; then\
if [ -z "$maclist_interfaces" ]; then
maclist_interfaces=$interface
else
maclist_interfaces="$maclist_interfaces $interface"
fi
fi
done
progress_message "$DOING MAC Verification on $maclist_interfaces..."
#
# Create chains.
#
for interface in $maclist_interfaces; do
chain=$(mac_chain $interface)
create_mac_chain $chain
#
# If we're using the mangle table and the interface is DHCP-enabled then we need to accept DHCP broadcasts from 0.0.0.0
#
if [ $MACLIST_TABLE = mangle ] && interface_has_option $interface dhcp; then
run_iptables -t mangle -A $chain -s 0.0.0.0 -d 255.255.255.255 -p udp --dport 67:68 -j RETURN
fi
if [ -n "$MACLIST_TTL" ]; then
chain1=$(macrecent_target $interface)
create_mac_chain $chain1
run_iptables -A $chain -t $MACLIST_TABLE -m recent --rcheck --seconds $MACLIST_TTL --name $chain -j RETURN
run_iptables -A $chain -t $MACLIST_TABLE -j $chain1
run_iptables -A $chain -t $MACLIST_TABLE -m recent --update --name $chain -j RETURN
run_iptables -A $chain -t $MACLIST_TABLE -m recent --set --name $chain
fi
done
#
# Process the maclist file producing the verification rules
#
while read disposition interface mac addresses; do
expandv disposition interface mac addresses
level=
case $disposition in
ACCEPT:*)
level=${disposition#*:}
disposition=ACCEPT
target=RETURN
;;
ACCEPT)
target=RETURN
;;
REJECT:*)
[ $MACLIST_TABLE = mangle ] && fatal_error "DISPOSITION = REJECT is incompatible with MACLIST_TABLE=mangle"
target=reject
disposition=REJECT
;;
REJECT)
[ $MACLIST_TABLE = mangle ] && fatal_error "DISPOSITION = REJECT is incompatible with MACLIST_TABLE=mangle"
target=reject
;;
DROP:*)
level=${disposition#*:}
disposition=DROP
target=DROP
;;
DROP)
target=DROP
;;
*)
addresses="$mac"
mac="$interface"
interface="$disposition"
disposition=ACCEPT
target=RETURN
;;
esac
physdev_part=
if [ -n "$BRIDGING" ]; then
case $interface in
*:*)
physdev_part="-m physdev --physdev-in ${interface#*:}"
interface=${interface%:*}
;;
esac
fi
[ -n "$MACLIST_TTL" ] && chain=$(macrecent_target $interface) || chain=$(mac_chain $interface)
if ! have_mac_chain $chain ; then
fatal_error "No hosts on $interface have the maclist option specified"
fi
if [ x${mac:=-} = x- ]; then
if [ -z "$addresses" ]; then
fatal_error "You must specify a MAC address or an IP address"
else
macpart=
fi
else
macpart=$(mac_match $mac)
fi
if [ -z "$addresses" ]; then
[ -n "$level" ] && \
log_rule_limit $level $chain $(mac_chain $interface) $disposition "$LOGLIMIT" "" -A -t $MACLIST_TABLE $macpart $physdev_part
run_iptables -A $chain -t $MACLIST_TABLE $macpart $physdev_part -j $target
else
for address in $(separate_list $addresses) ; do
[ -n "$level" ] && \
log_rule_limit $level $chain $(mac_chain $interface) $disposition "$LOGLIMIT" "" -A -t $MACLIST_TABLE $macpart -s $address $physdev_part
run_iptables2 -A $chain -t $MACLIST_TABLE $macpart -s $address $physdev_part -j $target
done
fi
done < $TMP_DIR/maclist
#
# Must take care of our own broadcasts and multicasts then terminate the verification
# chains
#
for interface in $maclist_interfaces; do
[ -n "$MACLIST_TTL" ] && chain=$(macrecent_target $interface) || chain=$(mac_chain $interface)
if [ -n "$MACLIST_LOG_LEVEL" -o $MACLIST_DISPOSITION != ACCEPT ]; then
indent >&3 << __EOF__
blob=\$(ip link show $interface 2> /dev/null)
[ -z "\$blob" ] && \
fatal_error "Interface $interface must be up before Shorewall can start"
ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet //; s/brd //; s/scope.*//;' | while read address broadcast; do
address=\${address%/*}
if [ -n "\$broadcast" ]; then
run_iptables -t $MACLIST_TABLE -A $chain -s \$address -d \$broadcast -j RETURN
fi
run_iptables -t $MACLIST_TABLE -A $chain -s \$address -d 255.255.255.255 -j RETURN
run_iptables -t $MACLIST_TABLE -A $chain -s \$address -d 224.0.0.0/4 -j RETURN
done
__EOF__
fi
if [ -n "$MACLIST_LOG_LEVEL" ]; then
log_rule_limit $MACLIST_LOG_LEVEL $chain $(mac_chain $interface) $MACLIST_DISPOSITION "$LOGLIMIT" "" -A -t $MACLIST_TABLE
fi
if [ $MACLIST_DISPOSITION != ACCEPT ]; then
run_iptables -A $chain -t $MACLIST_TABLE -j $maclist_target
fi
done
#
# Generate jumps from the input and forward chains
#
for hosts in $maclist_hosts; do
ipsec=${hosts%^*}
hosts=${hosts#*^}
[ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
interface=${hosts%%:*}
hosts=${hosts#*:}
case $MACLIST_TABLE in
filter)
for chain in $(first_chains $interface) ; do
run_iptables -A $chain $(match_source_hosts $hosts) -m state --state NEW \
$policy -j $(mac_chain $interface)
done
;;
*)
run_iptables -t mangle -A PREROUTING -i $interface $(match_source_hosts $hosts) -m state --state NEW \
$policy -j $(mac_chain $interface)
;;
esac
done
}
#
# Set up SYN flood protection
#
setup_syn_flood_chain ()
# $1 = policy chain
# $2 = synparams
# $3 = loglevel
{
local chain=@$1
local limit=$2
local limit_burst=
case $limit in
*:*)
limit_burst="--limit-burst ${limit#*:}"
limit=${limit%:*}
;;
esac
run_iptables -N $chain
run_iptables -A $chain -m limit --limit $limit $limit_burst -j RETURN
[ -n "$3" ] && \
log_rule_limit $3 $chain $chain DROP "-m limit --limit 5/min --limit-burst 5" "" ""
run_iptables -A $chain -j DROP
}
setup_syn_flood_chains()
{
for chain in $ALL_POLICY_CHAINS; do
eval loglevel=\$${chain}_loglevel
eval synparams=\$${chain}_synparams
[ -n "$synparams" ] && setup_syn_flood_chain $chain $synparams $loglevel
done
}
#
# Delete existing Proxy ARP
#
delete_proxy_arp() {
indent >&3 << __EOF__
if [ -f \${VARDIR}/proxyarp ]; then
while read address interface external haveroute; do
qt arp -i \$external -d \$address pub
[ -z "\$haveroute" -a -z "\$NOROUTE" ] && qt ip route del \$address dev \$interface
done < \${VARDIR}/proxyarp
rm -f \${VARDIR}/proxyarp
fi
for f in /proc/sys/net/ipv4/conf/*; do
[ -f \$f/proxy_arp ] && echo 0 > \$f/proxy_arp
done
__EOF__
[ -d $STATEDIR ] && touch $STATEDIR/proxyarp
}
#
# Setup Static Network Address Translation (NAT)
#
setup_nat() {
local external= interface= internal= allints= localnat= policyin= policyout=
validate_one() #1 = Variable Name, $2 = Column name, $3 = value
{
case $3 in
Yes|yes)
;;
No|no)
eval ${1}=
;;
*)
[ -n "$3" ] && \
fatal_error "Invalid value ($3) for $2 in entry \"$external $interface $internal $allints $localnat\""
;;
esac
}
do_one_nat() {
local add_ip_aliases=$ADD_IP_ALIASES iface=${interface%:*}
if [ -n "$add_ip_aliases" ]; then
case $interface in
*:)
interface=${interface%:}
add_ip_aliases=
;;
*)
[ -n "$RETAIN_ALIASES" ] || save_command del_ip_addr $external $iface
;;
esac
else
interface=${interface%:}
fi
validate_one allints "ALL INTERFACES" $allints
validate_one localnat "LOCAL" $localnat
if [ -n "$allints" ]; then
addnatrule nat_in -d $external $policyin -j DNAT --to-destination $internal
addnatrule nat_out -s $internal $policyout -j SNAT --to-source $external
else
addnatrule $(input_chain $iface) -d $external $policyin -j DNAT --to-destination $internal
addnatrule $(output_chain $iface) -s $internal $policyout -j SNAT --to-source $external
fi
[ -n "$localnat" ] && \
run_iptables2 -t nat -A OUTPUT -d $external $policyout -j DNAT --to-destination $internal
if [ -n "$add_ip_aliases" ]; then
list_search $external $ALIASES_TO_ADD || \
ALIASES_TO_ADD="$ALIASES_TO_ADD $external $interface"
fi
}
#
# At this point, we're just interested in the network translation
#
> $STATEDIR/nat
if [ -n "$POLICY_MATCH" ]; then
policyin="-m policy --pol none --dir in"
policyout="-m policy --pol none --dir out"
fi
[ -n "$RETAIN_ALIASES" ] || save_progress_message "Setting up one-to-one NAT..."
while read external interface internal allints localnat; do
expandv external interface internal allints localnat
do_one_nat
progress_message_and_save " Host $internal NAT $external on $interface"
done < $TMP_DIR/nat
}
#
# Delete existing Static NAT
#
delete_nat() {
run_iptables -t nat -F
run_iptables -t nat -X
[ -d $STATEDIR ] && touch $STATEDIR/nat
indent >&3 << __EOF__
if [ -f \${VARDIR}/nat ]; then
while read external interface; do
del_ip_addr \$external \$interface
done < \${VARDIR}/nat
rm -f \${VARDIR}/nat
fi
__EOF__
}
#
# Setup Network Mapping (NETMAP)
#
setup_netmap() {
while read type net1 interface net2 ; do
expandv type net1 interface net2
list_search $interface $ALL_INTERFACES || \
fatal_error "Unknown interface $interface in entry \"$type $net1 $interface $net2\""
case $type in
DNAT)
addnatrule $(input_chain $interface) -d $net1 -j NETMAP --to $net2
;;
SNAT)
addnatrule $(output_chain $interface) -s $net1 -j NETMAP --to $net2
;;
*)
fatal_error "Invalid type $type in entry \"$type $net1 $interface $net2\""
;;
esac
progress_message_and_save " Network $net1 on $interface mapped to $net2 ($type)"
done < $TMP_DIR/netmap
}
#
# Setup ECN disabling rules
#
setup_ecn() # $1 = file name
{
local interfaces=""
local hosts=
local h
strip_file ecn $1
progress_message2 "$DOING $1..."
while read interface host; do
expandv interface host
list_search $interface $ALL_INTERFACES || \
fatal_error "Unknown interface $interface"
list_search $interface $interfaces || \
interfaces="$interfaces $interface"
[ "x$host" = "x-" ] && host=
for h in $(separate_list ${host:-0.0.0.0/0}); do
hosts="$hosts $interface:$h"
done
done < $TMP_DIR/ecn
if [ -n "$interfaces" ]; then
progress_message "$DOING ECN control on${interfaces}..."
for interface in $interfaces; do
chain=$(ecn_chain $interface)
if havemanglechain $chain; then
flushmangle $chain
else
createmanglechain $chain
run_iptables -t mangle -A POSTROUTING -p tcp -o $interface -j $chain
run_iptables -t mangle -A OUTPUT -p tcp -o $interface -j $chain
fi
done
for host in $hosts; do
interface=${host%:*}
h=${host#*:}
run_iptables -t mangle -A $(ecn_chain $interface) -p tcp $(dest_ip_range $h) -j ECN --ecn-tcp-remove
progress_message_and_save " ECN Disabled to $h through $interface"
done
fi
}
#
# Set up an exclusion chain
#
build_exclusion_chain() # $1 = variable to store chain name into $2 = table, $3 = SOURCE exclusion list, $4 = DESTINATION exclusion list
{
local c=excl_${EXCLUSION_SEQ} net
EXCLUSION_SEQ=$(( $EXCLUSION_SEQ + 1 ))
run_iptables -t $2 -N $c
for net in $(separate_list $3); do
run_iptables -t $2 -A $c $(source_ip_range $net) -j RETURN
done
for net in $(separate_list $4); do
run_iptables -t $2 -A $c $(dest_ip_range $net) -j RETURN
done
case $2 in
filter)
eval exists_${c}=Yes
;;
nat)
eval exists_nat_${c}=Yes
;;
esac
eval $1=$c
}
#
# Setup queuing and classes
#
setup_tc1() {
local mark_part=
#
# Create the TC mangle chains
#
createmanglechain tcpre
if [ -n "$MANGLE_FORWARD" ]; then
createmanglechain tcfor
createmanglechain tcpost
fi
createmanglechain tcout
#
# Process the TC Rules File
#
strip_file tcrules
while read mark sources dests proto ports sports user testval length tos; do
expandv mark sources dests proto ports sports user testval length tos
rule=$(echo "$mark $sources $dests $proto $ports $sports $user $testval $length $tos")
process_tc_rule
done < $TMP_DIR/tcrules
#
# Link to the TC mangle chains from the main chains
#
#
# Route marks are restored in PREROUTING/OUTPUT prior to these rules. We only send
# packets that are not part of a marked connection to the 'tcpre/tcout' chains.
#
if [ -n "$ROUTEMARK_INTERFACES" -a -z "$TC_EXPERT" ]; then
mark_part="-m mark --mark 0/0xFF00"
#
# But let marks in tcpre override those assigned by 'track'
#
for interface in $ROUTEMARK_INTERFACES; do
run_iptables -t mangle -A PREROUTING -i $interface -j tcpre
done
fi
run_iptables -t mangle -A PREROUTING $mark_part -j tcpre
run_iptables -t mangle -A OUTPUT $mark_part -j tcout
if [ -n "$MANGLE_FORWARD" ]; then
run_iptables -t mangle -A FORWARD -j tcfor
run_iptables -t mangle -A POSTROUTING -j tcpost
fi
if [ -n "$HIGH_ROUTE_MARKS" ]; then
for chain in INPUT FORWARD; do
run_iptables -t mangle -I $chain -j MARK --and-mark 0xFF
done
fi
if [ -n "$TC_SCRIPT" ]; then
save_progress_message "Setting up Traffic Control..."
append_file $TC_SCRIPT
elif [ -n "$TC_ENABLED" ]; then
setup_traffic_shaping
fi
}
setup_tc() {
progress_message2 "$DOING Traffic Control Rules..."
setup_tc1
}
#
# Clear Traffic Shaping
#
delete_tc()
{
clear_one_tc() {
save_command "tc qdisc del dev $1 root 2> /dev/null"
save_command "tc qdisc del dev $1 ingress 2> /dev/null"
}
save_progress_message "Clearing Traffic Control/QOS"
append_file tcclear
indent >&3 << __EOF__
ip link list | while read inx interface details; do
case \$inx in
[0-9]*)
qt tc qdisc del dev \${interface%:} root
qt tc qdisc del dev \${interface%:} ingress
;;
*)
;;
esac
done
__EOF__
}
#
# Process a record from the accounting file
#
process_accounting_rule() {
rule=
rule2=
jumpchain=
user1=
accounting_error() {
error_message "WARNING: Invalid Accounting rule" $action $chain $source $dest $proto $port $sport $user
}
accounting_interface_error() {
error_message "WARNING: Unknown interface $1 in " $action $chain $source $dest $proto $port $sport $user
}
accounting_interface_verify() {
verify_interface $1 || accounting_interface_error $1
}
jump_to_chain() {
if ! havechain $jumpchain; then
if ! createchain2 $jumpchain No; then
accounting_error
return 2
fi
fi
rule="$rule -j $jumpchain"
}
do_ipp2p() {
[ -n "$IPP2P_MATCH" ] || fatal_error "Your kernel and/or iptables does not have IPP2P match support"
case $proto in
*:*)
proto=${proto#*:}
;;
*)
proto=tcp
;;
esac
rule="$rule -p $proto -m ipp2p --${port:-ipp2p}"
}
case $source in
*:*)
accounting_interface_verify ${source%:*}
rule="$(source_ip_range ${source#*:}) $(match_source_dev ${source%:*})"
;;
*.*.*.*|+*|!+*)
rule="$(source_ip_range $source)"
;;
-|all|any)
;;
*)
if [ -n "$source" ]; then
accounting_interface_verify $source
rule="$(match_source_dev $source)"
fi
;;
esac
[ -n "$dest" ] && case $dest in
*:*)
accounting_interface_verify ${dest%:*}
rule="$rule $(dest_ip_range ${dest#*:}) $(match_dest_dev ${dest%:*})"
;;
*.*.*.*|+*|!*)
rule="$rule $(dest_ip_range $dest)"
;;
-|all|any)
;;
*)
accounting_interface_verify $dest
rule="$rule $(match_dest_dev $dest)"
;;
esac
[ -n "$proto" ] && case $proto in
-|any|all)
;;
ipp2p|IPP2P|ipp2p:*|IPP2P:*)
do_ipp2p
;;
*)
rule="$rule -p $proto"
;;
esac
multiport=
[ -n "$port" ] && case $port in
-|any|all)
;;
*)
if [ -n "$MULTIPORT" ]; then
rule="$rule -m multiport --dports $port"
multiport=Yes
else
rule="$rule --dport $port"
fi
;;
esac
[ -n "$sport" ] && case $sport in
-|any|all)
;;
*)
if [ -n "$MULTIPORT" ]; then
[ -n "$multiport" ] && rule="$rule --sports $sport" || rule="$rule -m multiport --sports $sport"
else
rule="$rule --sport $sport"
fi
;;
esac
[ -n "$user" ] && case $user in
-|any|all)
;;
*)
[ "$chain" != OUTPUT ] && \
fatal_error "Invalid use of a user/group: chain is not OUTPUT but $chain"
rule="$rule -m owner"
user1="$user"
case "$user" in
!*+*)
if [ -n "${user#*+}" ]; then
rule="$rule ! --cmd-owner ${user#*+} "
fi
user1=${user%+*}
;;
*+*)
if [ -n "${user#*+}" ]; then
rule="$rule --cmd-owner ${user#*+} "
fi
user1=${user%+*}
;;
esac
case "$user1" in
!*:*)
if [ "$user1" != "!:" ]; then
temp="${user1#!}"
temp="${temp%:*}"
[ -n "$temp" ] && rule="$rule ! --uid-owner $temp "
temp="${user1#*:}"
[ -n "$temp" ] && rule="$rule ! --gid-owner $temp "
fi
;;
*:*)
if [ "$user1" != ":" ]; then
temp="${user1%:*}"
[ -n "$temp" ] && rule="$rule --uid-owner $temp "
temp="${user1#*:}"
[ -n "$temp" ] && rule="$rule --gid-owner $temp "
fi
;;
!*)
[ "$user1" != "!" ] && rule="$rule ! --uid-owner ${user1#!} "
;;
*)
[ -n "$user1" ] && rule="$rule --uid-owner $user1 "
;;
esac
;;
esac
case $action in
COUNT)
;;
DONE)
rule="$rule -j RETURN"
;;
*:COUNT)
rule2="$rule"
jumpchain=${action%:*}
jump_to_chain || return
;;
JUMP:*)
jumpchain=${action#*:}
jump_to_chain || return
;;
*)
jumpchain=$action
jump_to_chain || return
;;
esac
[ "x${chain:=accounting}" = "x-" ] && chain=accounting
ensurechain1 $chain
if do_iptables -A $chain $(fix_bang $rule) ; then
[ -n "$rule2" ] && run_iptables2 -A $jumpchain $rule2
progress_message " Accounting rule" $action $chain $source $dest $proto $port $sport $user $DONE
save_progress_message_short " Accounting rule $action $chain $source $dest $proto $port $sport $user Added"
else
accounting_error
fi
}
#
# Set up Accounting
#
setup_accounting() # $1 = Name of accounting file
{
progress_message2 "$DOING Accounting..."
save_progress_message "Setting up Accounting..."
strip_file accounting $1
while read action chain source dest proto port sport user ; do
expandv action chain source dest proto port sport user
process_accounting_rule
done < $TMP_DIR/accounting
if havechain accounting; then
for chain in INPUT FORWARD OUTPUT; do
run_iptables -I $chain -j accounting
done
fi
}
#
# Add one Filter Rule from an action -- Helper function for the action file processor
#
# The caller has established the following variables:
# COMMAND = current command.
# client = SOURCE IP or MAC
# server = DESTINATION IP or interface
# protocol = Protocol
# address = Original Destination Address
# port = Destination Port
# cport = Source Port
# multioption = String to invoke multiport match if appropriate
# action = The chain for this rule
# ratelimit = Optional rate limiting clause
# userandgroup = owner match clause
# logtag = Log tag
#
add_an_action()
{
local chain1
do_ports() {
if [ -n "$port" ]; then
dports="--dport"
if [ -n "$multioption" -a "$port" != "${port%,*}" ]; then
multiport="$multioption"
dports="--dports"
fi
dports="$dports $port"
fi
if [ -n "$cport" ]; then
sports="--sport"
if [ -n "$multioption" -a "$cport" != "${cport%,*}" ]; then
multiport="$multioption"
sports="--sports"
fi
sports="$sports $cport"
fi
}
interface_error()
{
fatal_error "Unknown interface $1 in rule: \"$rule\""
}
action_interface_verify()
{
verify_interface $1 || interface_error $1
}
handle_exclusion()
{
build_exclusion_chain chain1 filter "$excludesource" "$excludedest"
run_iptables -A $chain $(fix_bang $cli $proto $sports $multiport $dports) $user -j $chain1
cli=
proto=
sports=
multiport=
dports=
user=
}
do_ipp2p() {
[ -n "$IPP2P_MATCH" ] || fatal_error "Your kernel and/or iptables does not have IPP2P match support. Rule: \"$rule\""
dports="-m ipp2p --${port:-ipp2p}"
case $proto in
ipp2p|IPP2P)
proto=tcp
port=
do_ports
;;
ipp2p:udpIPP2P:UDP)
proto=udp
port=
do_ports
;;
ipp2p:all|IPP2P:ALL)
proto=all
;;
esac
}
# Set source variables. The 'cli' variable will hold the client match predicate(s).
cli=
case "$client" in
-)
;;
*:*)
action_interface_verify ${client%:*}
cli="$(match_source_dev ${client%:*}) $(source_ip_range ${client#*:})"
;;
*.*.*|+*|!+*)
cli="$(source_ip_range $client)"
;;
~*|!~*)
cli=$(mac_match $client)
;;
*)
if [ -n "$client" ]; then
action_interface_verify $client
cli="$(match_source_dev $client)"
fi
;;
esac
# Set destination variables - 'serv' and 'dest_interface' hold the server match predicate(s).
dest_interface=
serv=
case "$server" in
-)
;;
*.*.*|+*|!+*)
serv=$server
;;
~*|!~*)
fatal_error "Rule \"$rule\" - Destination may not be specified by MAC Address"
;;
*)
if [ -n "$server" ]; then
action_interface_verify $server
dest_interface="$(match_dest_dev $server)"
fi
;;
esac
# Setup protocol and port variables
sports=
dports=
proto=$protocol
servport=$serverport
multiport=
chain1=$chain
user="$userandgroup"
[ x$port = x- ] && port=
[ x$cport = x- ] && cport=
case $proto in
tcp|TCP|6)
do_ports
;;
tcp:syn)
proto="$proto --syn"
do_ports
;;
udp|UDP|17)
do_ports
;;
icmp|ICMP|1)
[ -n "$port" ] && dports="--icmp-type $port"
;;
ipp2p|IPP2P|ipp2p:*|IPP2P:*)
do_ipp2p
;;
*)
[ -n "$port" ] && \
fatal_error "Port number not allowed with protocol \"$proto\"; rule: \"$rule\""
;;
esac
proto="${proto:+-p $proto}"
# Some misc. setup
case "$logtarget" in
LOG)
[ -z "$loglevel" ] && fatal_error "LOG requires log level"
;;
esac
if [ -n "${excludesource}${excludedest}" ]; then
handle_exclusion
fi
if [ -n "${serv}" ]; then
for serv1 in $(separate_list $serv); do
for srv in $(firewall_ip_range $serv1); do
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel $chain1 $action $logtarget "$ratelimit" "$logtag" -A $user \
$(fix_bang $proto $sports $multiport $cli $(dest_ip_range $srv) $dports)
fi
run_iptables2 -A $chain1 $proto $multiport $cli $sports \
$(dest_ip_range $srv) $dports $ratelimit $user -j $target
done
done
else
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel $chain1 $action $logtarget "$ratelimit" "$logtag" -A $user \
$(fix_bang $proto $sports $multiport $cli $dest_interface $dports)
fi
run_iptables2 -A $chain1 $proto $multiport $cli $dest_interface $sports \
$dports $ratelimit $user -j $target
fi
}
#
# Process a record from an action file
#
process_action() # $1 = chain (Chain to add the rules to)
# $2 = action (The action name for logging purposes)
# $3 = target (The (possibly modified) contents of the TARGET column)
# $4 = clients
# $5 = servers
# $6 = protocol
# $7 = ports
# $8 = cports
# $9 = ratelimit
# $10 = userspec
{
local chain="$1"
local action="$2"
local target="$3"
local clients="$4"
local servers="$5"
local protocol="$6"
local ports="$7"
local cports="$8"
local ratelimit="$9"
local userspec="${10}"
local userandgroup=
local logtag=
if [ -n "$ratelimit" ]; then
case $ratelimit in
-)
ratelimit=
;;
*:*)
ratelimit="-m limit --limit ${ratelimit%:*} --limit-burst ${ratelimit#*:}"
;;
*)
ratelimit="-m limit --limit $ratelimit"
;;
esac
fi
[ "x$userspec" = "x-" ] && userspec=
if [ -n "$userspec" ]; then
userandgroup="-m owner"
case "$userspec" in
!*+*)
if [ -n "${userspec#*+}" ]; then
userandgroup="$userandgroup ! --cmd-owner ${userspec#*+}"
fi
userspec=${userspec%+*}
;;
*+*)
if [ -n "${userspec#*+}" ]; then
userandgroup="$userandgroup --cmd-owner ${userspec#*+}"
fi
userspec=${userspec%+*}
;;
esac
case "$userspec" in
!*:*)
if [ "$userspec" != "!:" ]; then
temp="${userspec#!}"
temp="${temp%:*}"
[ -n "$temp" ] && userandgroup="$userandgroup ! --uid-owner $temp"
temp="${userspec#*:}"
[ -n "$temp" ] && userandgroup="$userandgroup ! --gid-owner $temp"
fi
;;
*:*)
if [ "$userspec" != ":" ]; then
temp="${userspec%:*}"
[ -n "$temp" ] && userandgroup="$userandgroup --uid-owner $temp"
temp="${userspec#*:}"
[ -n "$temp" ] && userandgroup="$userandgroup --gid-owner $temp"
fi
;;
!*)
[ "$userspec" != "!" ] && userandgroup="$userandgroup ! --uid-owner ${userspec#!}"
;;
*)
[ -n "$userspec" ] && userandgroup="$userandgroup --uid-owner $userspec"
;;
esac
[ "$userandgroup" = "-m owner" ] && userandgroup=
fi
# Isolate log level
if [ "$target" = "${target%:*}" ]; then
loglevel=
else
loglevel="${target#*:}"
target="${target%%:*}"
expandv loglevel
if [ "$loglevel" != "${loglevel%:*}" ]; then
logtag="${loglevel#*:}"
loglevel="${loglevel%:*}"
expandv logtag
fi
case $loglevel in
none*)
loglevel=
[ $target = LOG ] && return
;;
esac
loglevel=${loglevel%\!}
fi
logtarget="$target"
case $target in
REJECT)
target=reject
;;
CONTINUE)
target=RETURN
;;
*)
;;
esac
excludesource=
case ${clients:=-} in
*!*!*)
fatal_error "Invalid SOURCE in rule \"$rule\""
;;
!*)
if [ $(list_count $clients) -gt 1 ]; then
excludesource=${clients#!}
clients=
fi
;;
*!*)
excludesource=${clients#*!}
clients=${clients%!*}
;;
esac
excludedest=
case ${servers:=-} in
*!*!*)
fatal_error "Invalid DEST in rule \"$rule\""
;;
!*)
if [ $(list_count $servers) -gt 1 ]; then
excludedest=${servers#*!}
servers=
fi
;;
*!*)
excludedest=${servers#*!}
servers=${servers%!*}
;;
esac
# Generate Netfilter rule(s)
[ "x$protocol" = "x-" ] && protocol=all || protocol=${protocol:=all}
if [ -n "$XMULTIPORT" ] && \
! list_search $protocol "icmp" "ICMP" "1" && \
[ $(( $(list_count $ports) + $(list_count1 $(split $ports ) ) )) -le 16 -a \
$(( $(list_count $cports) + $(list_count1 $(split $cports ) ) )) -le 16 ]
then
#
# Extended MULTIPORT is enabled, and less than
# 16 ports are listed (port ranges count as two ports) - use multiport match.
#
multioption="-m multiport"
for client in $(separate_list $clients); do
for server in $(separate_list $servers); do
#
# add_an_action() modifies these so we must set their values each time
#
port=${ports:=-}
cport=${cports:=-}
add_an_action
done
done
elif [ -n "$MULTIPORT" ] && \
! list_search $protocol "icmp" "ICMP" "1" && \
[ "$ports" = "${ports%:*}" -a \
"$cports" = "${cports%:*}" -a \
$(list_count $ports) -le 15 -a \
$(list_count $cports) -le 15 ]
then
#
# MULTIPORT is enabled, there are no port ranges in the rule and less than
# 16 ports are listed - use multiport match.
#
multioption="-m multiport"
for client in $(separate_list $clients); do
for server in $(separate_list $servers); do
#
# add_an_action() modifies these so we must set their values each time
#
port=${ports:=-}
cport=${cports:=-}
add_an_action
done
done
else
#
# MULTIPORT is disabled or the rule isn't compatible with multiport match
#
multioption=
for client in $(separate_list $clients); do
for server in $(separate_list $servers); do
for port in $(separate_list ${ports:=-}); do
for cport in $(separate_list ${cports:=-}); do
add_an_action
done
done
done
done
fi
#
# Report Result
#
progress_message " Rule \"$rule\" $DONE."
save_progress_message_short " Rule \"$rule\" added."
}
#
# Source the extension script for an action, if any
#
process_action_file() # $1 = File Name
{
local user_exit=$(find_file $1)
if [ -f $user_exit ]; then
progress_message "Processing $user_exit ..."
. $user_exit
fi
}
#
# Create and record a log action chain -- Log action chains have names
# that are formed from the action name by prepending a "%" and appending
# a 1- or 2-digit sequence number. In the functions that follow,
# the CHAIN, LEVEL and TAG variable serves as arguments to the user's
# exit. We call the exit corresponding to the name of the action but we
# set CHAIN to the name of the iptables chain where rules are to be added.
# Similarly, LEVEL and TAG contain the log level and log tag respectively.
#
# For each <action>, we maintain two variables:
#
# <action>_actchain - The action chain number.
# <action>_chains - List of ( level[:tag] , chainname ) pairs
#
# The maximum length of a chain name is 30 characters -- since the log
# action chain name is 2-3 characters longer than the base chain name,
# this function truncates the original chain name where necessary before
# it adds the leading "%" and trailing sequence number.
createlogactionchain() # $1 = Action Name, $2 = Log Level [: Log Tag ]
{
local actchain= action=$1 level=$2
eval actchain=\${${action}_actchain}
case ${#action} in
29|30)
CHAIN=$(echo $action | truncate 28) # %...n makes 30
;;
*)
CHAIN=${action}
;;
esac
while havechain %${CHAIN}${actchain}; do
actchain=$(($actchain + 1))
[ $actchain -eq 10 -a ${#CHAIN} -eq 28 ] && CHAIN=$(echo $CHAIN | truncate 27) # %...nn makes 30
done
CHAIN=%${CHAIN}${actchain}
eval ${action}_actchain=$(($actchain + 1))
createchain $CHAIN No
LEVEL=${level%:*}
if [ "$LEVEL" != "$level" ]; then
TAG=${level#*:}
else
TAG=
fi
[ none = "${LEVEL%\!}" ] && LEVEL=
process_action_file $1
eval ${action}_chains=\"\$${action}_chains $level $CHAIN\"
}
#
# Create an action chain and run it's associated user exit
#
createactionchain() # $1 = Action, including log level and tag if any
{
case $1 in
*::*)
fatal_error "Invalid ACTION $1"
;;
*:*:*)
set -- $(split $1)
createlogactionchain $1 $2:$3
;;
*:*)
set -- $(split $1)
createlogactionchain $1 $2
;;
*)
CHAIN=$1
LEVEL=
TAG=
createchain $CHAIN no
process_action_file $CHAIN
;;
esac
}
#
# Find the chain that handles the passed action. If the chain cannot be found,
# a fatal error is generated and the function does not return.
#
find_logactionchain() # $1 = Action, including log level and tag if any
{
local fullaction=$1 action=${1%%:*} level= chains=
case $fullaction in
*:*)
level=${fullaction#*:}
;;
*)
havechain $action || fatal_error "Fatal error in find_logactionchain"
echo $action
return
;;
esac
eval chains="\$${action}_chains"
set -- $chains
while [ $# -gt 0 ]; do
[ "$1" = "$level" ] && { echo $2 ; return ; }
shift 2
done
fatal_error "Fatal error in find_logactionchain"
}
#
# This function determines the logging for a subordinate action or a rule within a subordinate action
#
merge_levels() # $1=level at which superior action is called, $2=level at which the subordinate rule is called
{
local superior=$1 subordinate=$2
set -- $(split $1)
case $superior in
*:*:*)
case $2 in
'none!')
echo ${subordinate%%:*}:'none!':$3
return
;;
*'!')
echo ${subordinate%%:*}:$2:$3
return
;;
*)
case $subordinate in
*:*:*)
echo $subordinate
return
;;
*:*)
echo $subordinate:$3
return
;;
*)
echo ${subordinate%%:*}:$2:$3
return
;;
esac
;;
esac
;;
*:*)
case $2 in
'none!')
echo ${subordinate%%:*}:'none!'
return
;;
*'!')
echo ${subordinate%%:*}:$2
return
;;
*)
case $subordinate in
*:*)
echo $subordinate
return
;;
*)
echo ${subordinate%%:*}:$2
return
;;
esac
;;
esac
;;
*)
echo $subordinate
;;
esac
}
# This function substitutes the second argument for the first part of the first argument up to the first colon (":")
#
# Example:
#
# substitute_action DNAT PARAM:info:FTP
#
# produces "DNAT:info:FTP"
#
substitute_action() # $1 = parameter, $2 = action
{
local logpart=${2#*:}
case $2 in
*:*)
echo $1:${logpart%/}
;;
*)
echo $1
;;
esac
}
#
# This function maps old action names into their new macro equivalents
#
map_old_action() # $1 = Potential Old Action
{
local macro= aktion
if [ -n "$MAPOLDACTIONS" ]; then
case $1 in
*/*)
echo $1
return
;;
*)
if [ -f $(find_file $1) ]; then
echo $1
return
fi
case $1 in
Allow*)
macro=${1#*w}
aktion=ACCEPT
;;
Drop*)
macro=${1#*p}
aktion=DROP
;;
Reject*)
macro=${1#*t}
aktion=REJECT
;;
*)
echo $1
return
;;
esac
esac
if [ -f $(find_file macro.$macro) ]; then
echo $macro/$aktion
return
fi
fi
echo $1
}
#
# Combine a source/dest from the macro body with one from the macro invocation
#
merge_macro_source_dest() # $1 = source/dest from macro body, $2 = source/dest from invocation
{
case $2 in
-)
echo ${1}
;;
*.*.*|+*|~*|!~*)
#
# Value in the invocation is an address -- put it behind the value from the macro
#
echo ${1}:${2}
;;
*)
echo ${2}:${1}
;;
esac
}
#
# The next three functions implement the three phases of action processing.
#
# The first phase (process_actions1) occurs before the rules file is processed. ${SHAREDIR}/actions.std
# and ${CONFDIR}/actions are scanned (in that order) and for each action:
#
# a) The related action definition file is located and scanned.
# b) Forward and unresolved action references are trapped as errors.
# c) A dependency graph is created. For each <action>, the variable 'requiredby_<action>' lists the
# action[:level[:tag]] of each action invoked by <action>.
# d) All actions are listed in the global variable ACTIONS.
# e) Common actions are recorded (in variables of the name <policy>_common) and are added to the global
# USEDACTIONS
#
# As the rules file is scanned, each action[:level[:tag]] is merged onto the USEDACTIONS list. When an <action>
# is merged onto this list, its action chain is created. Where logging is specified, a chain with the name
# %<action>n is used where the <action> name is truncated on the right where necessary to ensure that the total
# length of the chain name does not exceed 30 characters.
#
# The second phase (process_actions2) occurs after the rules file is scanned. The transitive closure of
# USEDACTIONS is generated; again, as new actions are merged onto this list, their action chains are created.
#
# The final phase (process_actions3) is to traverse the USEDACTIONS list populating each chain appropriately
# by reading the action definition files and creating rules. Note that a given action definition file is
# processed once for each unique [:level[:tag]] applied to an invocation of the action.
#
process_actions1() {
ACTIONS="dropBcast allowBcast dropNotSyn rejNotSyn dropInvalid allowInvalid allowinUPnP allowoutUPnP forwardUPnP"
USEDACTIONS=
strip_file actions
strip_file actions.std ${SHAREDIR}/actions.std
for inputfile in actions.std actions; do
while read xaction rest; do
[ "x$rest" = x ] || fatal_error "Invalid Action: $xaction $rest"
case $xaction in
*:*)
temp=${xaction#*:}
[ ${#temp} -le 30 ] || fatal_error "Action Name Longer than 30 Characters: $temp"
xaction=${xaction%:*}
case $temp in
ACCEPT|REJECT|DROP|QUEUE)
eval ${temp}_common=$xaction
if [ -n "$xaction" ] && ! list_search $xaction $USEDACTIONS; then
USEDACTIONS="$USEDACTIONS $xaction"
fi
;;
*)
fatal_error "Common Actions are only allowed for ACCEPT, DROP, REJECT and QUEUE"
;;
esac
esac
[ -z "$xaction" ] && continue
[ "$xaction" = "$(chain_base $xaction)" ] || fatal_error "Invalid Action Name: $xaction"
if ! list_search $xaction $ACTIONS; then
f=action.$xaction
fn=$(find_file $f)
eval requiredby_${action}=
if [ -f $fn ]; then
progress_message2 " Pre-processing $fn..."
strip_file $f $fn
while read xtarget xclients xservers xprotocol xports xcports xratelimit $xuserspec; do
expandv xtarget
temp="${xtarget%%:*}"
case "$temp" in
ACCEPT|DROP|REJECT|LOG|QUEUE|CONTINUE)
;;
*)
if list_search $temp $ACTIONS; then
eval requiredby=\"\$requiredby_${xaction}\"
list_search $xtarget $requiredby || eval requiredby_${xaction}=\"$requiredby $xtarget\"
else
temp=$(map_old_action $temp)
case $temp in
*/*)
param=${temp#*/}
case $param in
ACCEPT|DROP|REJECT|LOG|QUEUE|CONTINUE)
;;
*)
rule="$xtarget $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec"
fatal_error "Invalid Macro Parameter in rule \"$rule\""
;;
esac
temp=${temp%%/*}
;;
esac
f1=macro.${temp}
fn=$(find_file $f1)
if [ ! -f $TMP_DIR/$f1 ]; then
#
# We must only verify macros once to ensure that they don't invoke any non-standard actions
#
if [ -f $fn ]; then
strip_file $f1 $fn
progress_message " ..Expanding Macro $fn..."
while read mtarget mclients mservers mprotocol mports mcports mratelimit muserspec; do
expandv mtarget
temp="${mtarget%%:*}"
case "$temp" in
ACCEPT|DROP|REJECT|LOG|QUEUE|CONTINUE|PARAM)
;;
*)
rule="$mtarget $mclients $mservers $mprotocol $mports $mcports $mratelimit $muserspec"
fatal_error "Invalid TARGET in rule \"$rule\""
esac
done < $TMP_DIR/$f1
progress_message " ..End Macro"
else
rule="$xtarget $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec"
fatal_error "Invalid TARGET in rule \"$rule\""
fi
fi
fi
;;
esac
done < $TMP_DIR/$f
else
fatal_error "Missing Action File: $f"
fi
ACTIONS="$ACTIONS $xaction"
fi
done < $TMP_DIR/$inputfile
done
}
process_actions2() {
local interfaces="$(find_interfaces_by_option upnp)"
if [ -n "$interfaces" ]; then
if ! list_search forwardUPnP $USEDACTIONS; then
error_message "WARNING:Missing forwardUPnP rule (required by 'upnp' interface option on $interfaces)"
fi
fi
progress_message " Generating Transitive Closure of Used-action List..."
changed=Yes
while [ -n "$changed" ]; do
changed=
for xaction in $USEDACTIONS; do
eval required=\"\$requiredby_${xaction%%:*}\"
for xaction1 in $required; do
#
# Generate the action that will be passed to process_action by merging the
# logging specified when the action was invoked with the logging in the
# invocation of the subordinate action (usually no logging)
#
xaction2=$(merge_levels $xaction $xaction1)
if ! list_search $xaction2 $USEDACTIONS; then
#
# We haven't seen this one before -- create and record a chain to handle it
#
USEDACTIONS="$USEDACTIONS $xaction2"
createactionchain $xaction2
changed=Yes
fi
done
done
done
}
process_actions3() {
for xaction in $USEDACTIONS; do
#
# Find the chain associated with this action:level:tag
#
xchain=$(find_logactionchain $xaction)
#
# Split the action:level:tag
#
set -- $(split $xaction)
xaction1=$1
xlevel=$2
xtag=$3
save_progress_message "Creating action chain $xaction1"
#
# Handle Builtin actions
#
case $xaction1 in
dropBcast)
if [ -n "$USEPKTTYPE" ]; then
case $xlevel in
none'!')
;;
*)
if [ -n "$xlevel" ]; then
log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -m pkttype --pkt-type broadcast
log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -m pkttype --pkt-type multicast
fi
;;
esac
run_iptables -A dropBcast -m pkttype --pkt-type broadcast -j DROP
run_iptables -A dropBcast -m pkttype --pkt-type multicast -j DROP
else
for interface in $(find_bcastdetect_interfaces); do
indent >&3 << __EOF__
ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u | while read address; do
__EOF__
case $xlevel in
none*)
;;
*)
[ -n "$xlevel" ] && \
indent >&3 << __EOF__
log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -d \$address
__EOF__
;;
esac
indent >&3 << __EOF__
run_iptables -A $xchain -d \$address -j DROP
done
__EOF__
done
for address in $(find_broadcasts) 255.255.255.255 224.0.0.0/4 ; do
case $xlevel in
none*)
;;
*)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -d $address
;;
esac
run_iptables -A $xchain -d $address -j DROP
done
fi
;;
allowBcast)
if [ -n "$USEPKTTYPE" ]; then
case $xlevel in
none'!')
;;
*)
if [ -n "$xlevel" ]; then
log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -m pkttype --pkt-type broadcast
log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -m pkttype --pkt-type multicast
fi
;;
esac
run_iptables -A allowBcast -m pkttype --pkt-type broadcast -j ACCEPT
run_iptables -A allowBcast -m pkttype --pkt-type multicast -j ACCEPT
else
for interface in $(find_bcastdetect_interfaces); do
indent >&3 << __EOF__
ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u | while read address; do
__EOF__
case $xlevel in
none*)
;;
*)
[ -n "$xlevel" ] && \
indent >&3 << __EOF__
log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -d \$address
__EOF__
;;
esac
indent >&3 << __EOF__
run_iptables -A $xchain -d \$address -j ACCEPT
done
__EOF__
done
for address in $(find_broadcasts) 255.255.255.255 224.0.0.0/4 ; do
case $xlevel in
none*)
;;
*)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -d $address
;;
esac
run_iptables -A $xchain -d $address -j ACCEPT
done
fi
;;
dropNotSyn)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain dropNotSyn DROP "" "$xtag" -A -p tcp ! --syn
run_iptables -A $xchain -p tcp ! --syn -j DROP
;;
rejNotSyn)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain rejNotSyn REJECT "" "$xtag" -A -p tcp ! --syn
run_iptables -A $xchain -p tcp ! --syn -j REJECT --reject-with tcp-reset
;;
dropInvalid)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain dropInvalid DROP "" "$xtag" -A -m state --state INVALID
run_iptables -A $xchain -m state --state INVALID -j DROP
;;
allowInvalid)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain allowInvalid ACCEPT "" "$xtag" -A -m state --state INVALID
run_iptables -A $xchain -m state --state INVALID -j ACCEPT
;;
forwardUPnP)
;;
allowinUPnP)
if [ -n "$xlevel" ]; then
log_rule_limit ${xlevel%\!} $xchain allowinUPnP ACCEPT "" "$xtag" -A -p udp --dport 1900
log_rule_limit ${xlevel%\!} $xchain allowinUPnP ACCEPT "" "$xtag" -A -p tcp --dport 49152
fi
run_iptables -A $xchain -p udp --dport 1900 -j ACCEPT
run_iptables -A $xchain -p tcp --dport 49152 -j ACCEPT
;;
allowoutUPnP)
[ -n "$xlevel" ] && \
log_rule_limit ${xlevel%\!} $xchain allowoutUPnP ACCEPT "" "$xtag" -A -m owner --owner-cmd upnpd
run_iptables -A $xchain -m owner --cmd-owner upnpd -j ACCEPT
;;
*)
#
# Not a builtin
#
f=action.$xaction1
progress_message2 "$DOING $(find_file $f) for Chain $xchain..."
while read xtarget xclients xservers xprotocol xports xcports xratelimit xuserspec; do
expandv xtarget
#
# Generate the target:level:tag to pass to process_action()
#
xaction2=$(merge_levels $xaction $xtarget)
is_macro=
param=
xtarget1=${xaction2%%:*}
case $xtarget1 in
ACCEPT|DROP|REJECT|LOG|QUEUE|CONTINUE)
#
# Builtin target -- Nothing to do
#
;;
*)
if list_search $xtarget1 $ACTIONS ; then
#
# An Action -- Replace the target from the file
# -- with the one generated above
xtarget=$xaction2
#
# And locate the chain for that action:level:tag
#
xaction2=$(find_logactionchain $xtarget)
else
is_macro=yes
fi
;;
esac
expandv xclients xservers xprotocol xports xcports xratelimit xuserspec
if [ -n "$is_macro" ]; then
xtarget1=$(map_old_action $xtarget1)
case $xtarget1 in
*/*)
param=${xtarget1#*/}
xtarget1=${xtarget1%%/*}
;;
esac
progress_message "..Expanding Macro $(find_file macro.$xtarget1)..."
while read mtarget mclients mservers mprotocol mports mcports mratelimit muserspec; do
expandv mtarget mclients mservers mprotocol mports mcports mratelimit muserspec
mtarget=$(merge_levels $xaction2 $mtarget)
case $mtarget in
PARAM|PARAM:*)
[ -n "$param" ] && mtarget=$(substitute_action $param $mtarget) || fatal_error "PARAM requires that a parameter be supplied in macro invocation"
;;
esac
if [ -n "$mclients" ]; then
case $mclients in
-|SOURCE)
mclients=${xclients}
;;
DEST)
mclients=${xservers}
;;
*)
mclients=$(merge_macro_source_dest $mclients $xclients)
;;
esac
else
mclients=${xclients}
fi
if [ -n "$mservers" ]; then
case $mservers in
-|DEST)
mservers=${xservers}
;;
SOURCE)
mservers=${xclients}
;;
*)
mservers=$(merge_macro_source_dest $mservers $xservers)
;;
esac
else
mservers=${xserverss}
fi
[ -n "$xprotocol" ] && [ "x${xprotocol}" != x- ] && mprotocol=$xprotocol
[ -n "$xports" ] && [ "x${xports}" != x- ] && mports=$xports
[ -n "$xcports" ] && [ "x${xcports}" != x- ] && mcports=$xcports
[ -n "$xratelimit" ] && [ "x${xratelimit}" != x- ] && mratelimit=$xratelimit
[ -n "$xuserspec" ] && [ "x${xuserspec}" != x- ] && muserspec=$xuserspec
rule="$mtarget ${mclients:=-} ${mservers:=-} ${mprotocol:=-} ${mports:=-} ${mcports:=-} ${mratelimit:-} ${muserspec:=-}"
process_action $xchain $xaction1 $mtarget $mclients $mservers $mprotocol $mports $mcports $mratelimit $muserspec
done < $TMP_DIR/macro.$xtarget1
progress_message "..End Macro"
else
rule="$xtarget $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec"
process_action $xchain $xaction1 $xaction2 $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec
fi
done < $TMP_DIR/$f
;;
esac
done
}
#
# Add a NAT rule - Helper function for the rules file processor
#
# The caller has established the following variables:
# COMMAND = The current command
# the motions.
# cli = Source IP, interface or MAC Specification
# serv = Destination IP Specification
# servport = Port the server is listening on
# dest_interface = Destination Interface Specification
# proto = Protocol Specification
# addr = Original Destination Address
# dports = Destination Port Specification. 'dports' may be changed
# by this function
# cport = Source Port Specification
# multiport = String to invoke multiport match if appropriate
# ratelimit = Optional rate limiting clause
# userandgroup = -m owner match to limit the rule to a particular user and/or group
# logtag = Log tag
# excludesource = Source Exclusion List
#
add_nat_rule() {
local chain
local excludedests=
# Be sure we can NAT
if [ -z "$NAT_ENABLED" ]; then
fatal_error "Rule \"$rule\" requires NAT which is disabled"
fi
# Parse SNAT address if any
if [ "$addr" != "${addr%:*}" ]; then
fatal_error "SNAT may no longer be specified in a DNAT rule; use ${CONFDIR}/masq instead"
fi
# Set original destination address
case $addr in
all)
addr=
;;
detect)
eval interfaces=\$${source}_interfaces
if [ -n "$DETECT_DNAT_IPADDRS" -a "$source" != "$FW" ]; then
save_command
if [ $(list_count1 $interfaces) -eq 1 ]; then
save_command "addr=\$(find_first_interface_address $interface)"
else
save_command "addr="
for interface in $interfaces; do
ident >&3 << __EOF__
addr="\$addr \$(find_first_interface_address $interface)"
__EOF__
done
fi
else
addr=
fi
;;
!*)
if [ $(list_count $addr) -gt 1 ]; then
excludedests="${addr#\!}"
addr=
fi
;;
esac
addr=${addr:-0.0.0.0/0}
# Select target
if [ "$logtarget" = SAME ]; then
[ -n "$servport" ] && fatal_error "Port mapping not allowed in SAME rules"
serv1=
for srv in $(separate_list $serv); do
serv1="$serv1 --to ${srv}"
done
target1="SAME $serv1"
elif [ -n "$serv" ]; then
servport="${servport:+:$servport}"
serv1=
for srv in $(separate_list $serv); do
serv1="$serv1 --to-destination ${srv}${servport}"
done
target1="DNAT $serv1"
else
target1="REDIRECT --to-port $servport"
fi
# Generate nat table rules
if [ "$source" = "$FW" ]; then
if [ -n "${excludesource}${excludedests}" ]; then
build_exclusion_chain chain nat "$excludesource" $excludedests
for adr in $(separate_list $addr); do
run_iptables2 -t nat -A OUTPUT $cli $proto $userandgroup $multiport $sports $dports $(dest_ip_range $adr) -j $chain
done
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel $chain OUTPUT $logtarget "$ratelimit" "$logtag" -A -t nat
fi
addnatrule $chain $ratelimit $proto -j $target1 # Protocol is necessary for port redirection
else
for adr in $(separate_list $addr); do
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel OUTPUT OUTPUT $logtarget "$ratelimit" "$logtag" -A -t nat \
$(fix_bang $proto $cli $sports $userandgroup $(dest_ip_range $adr) $multiport $dports)
fi
run_iptables2 -t nat -A OUTPUT $ratelimit $proto $sports $userandgroup $(dest_ip_range $adr) $multiport $dports -j $target1
done
fi
else
if [ -n "${excludesource}${excludedests}" ]; then
build_exclusion_chain chain nat "$excludesource" $excludedests
if [ $addr = detect ]; then
ensurenatchain $(dnat_chain $source)
indent >&3 << __EOF__
for adr in \$addr; do
run_iptables -t nat -A $(fix_bang $(dnat_chain $source) $cli $proto $multiport $sports $dports) -d \$adr -j $chain
__EOF__
else
for adr in $(separate_list $addr); do
addnatrule $(dnat_chain $source) $cli $proto $multiport $sports $dports $(dest_ip_range $adr) -j $chain
done
fi
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel $chain $(dnat_chain $source) $logtarget "$ratelimit" "$logtag" -A -t nat
fi
addnatrule $chain $ratelimit $proto -j $target1 # Protocol is necessary for port redirection
else
chain=$(dnat_chain $source)
if [ $addr = detect ]; then
ensurenatchain $chain
indent >&3 << __EOF__
for adr in \$addr; do
__EOF__
if [ -n "$loglevel" ]; then
indent >&3 << __EOF__
log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A -t nat $(fix_bang $proto $cli $sports $multiport $dports) -d \$adr
__EOF__
fi
indent >&3 << __EOF__
run_iptables -t nat -A $chain $(fix_bang $proto $ratelimit $cli $sports $multiport $dports) -d \$adr -j $target1
__EOF__
else
for adr in $(separate_list $addr); do
if [ -n "$loglevel" ]; then
ensurenatchain $chain
log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A -t nat \
$(fix_bang $proto $cli $sports $(dest_ip_range $adr) $multiport $dports)
fi
addnatrule $chain $proto $ratelimit $cli $sports \
-d $adr $multiport $dports -j $target1
done
fi
fi
fi
# Replace destination port by the new destination port
if [ -n "$servport" ]; then
if [ -z "$multiport" ]; then
dports="--dport ${servport#*:}"
else
dports="--dports ${servport#*:}"
fi
fi
[ "x$addr" = "x0.0.0.0/0" ] && addr=
ratelimit=
}
#
# Process a record from the rules file
#
process_rule() # $1 = target
# $2 = clients
# $3 = servers
# $4 = protocol
# $5 = ports
# $6 = cports
# $7 = address
# $8 = ratelimit
# $9 = userspec
{
local target="$1"
local clients="$2"
local servers="$3"
local protocol="$4"
local ports="$5"
local cports="$6"
local address="$7"
local ratelimit="$8"
local userspec="$9"
local userandgroup=
local logtag=
local nonat=
#
# Add one Filter Rule
#
# The caller has established the following variables:
# COMMAND = current command.
# which only goes through the motions.
# client = SOURCE IP or MAC
# server = DESTINATION IP or interface
# protocol = Protocol
# address = Original Destination Address
# port = Destination Port
# cport = Source Port
# multioption = String to invoke multiport match if appropriate
# servport = Port the server listens on
# chain = The canonical chain for this rule
# logchain = The chain that should be mentioned in log messages
# ratelimit = Optional rate limiting clause
# userandgroup = -m owner clause
# userspec = User name
# logtag = Log tag
# policy = Applicable Policy
#
add_a_rule()
{
local natrule=
do_ports() {
if [ -n "$port" ]; then
dports="--dport"
if [ -n "$multioption" -a "$port" != "${port%,*}" ]; then
multiport="$multioption"
dports="--dports"
fi
dports="$dports $port"
fi
if [ -n "$cport" ]; then
sports="--sport"
if [ -n "$multioption" -a "$cport" != "${cport%,*}" ]; then
multiport="$multioption"
sports="--sports"
fi
sports="$sports $cport"
fi
}
interface_error()
{
fatal_error "Unknown interface $1 in rule: \"$rule\""
}
rule_interface_verify()
{
verify_interface $1 || interface_error $1
}
handle_exclusion()
{
build_exclusion_chain chain filter "$excludesource" "$excludedest"
if [ -n "$addr" -a -n "$CONNTRACK_MATCH" ]; then
for adr in $(separate_list $addr); do
run_iptables -A $logchain $state $(fix_bang $proto $sports $multiport $dports) $user -m conntrack --ctorigdst $adr -j $chain
done
addr=
else
run_iptables -A $state $logchain $(fix_bang $cli $proto $sports $multiport $dports) $user -j $chain
fi
cli=
proto=
sports=
multiport=
dports=
user=
state=
}
do_ipp2p() {
[ -n "$IPP2P_MATCH" ] || fatal_error "Your kernel and/or iptables does not have IPP2P match support. Rule: \"$rule\""
dports="-m ipp2p --${port:-ipp2p}"
case $proto in
ipp2p|IPP2P|ipp2p:tcp|IPP2P:TCP)
port=
proto=tcp
do_ports
;;
ipp2p:udp|IPP2P:UDP)
port=
proto=udp
do_ports
;;
ipp2p:all|IPP2P:ALL)
port=
proto=all
;;
*)
fatal_error "Invalid IPP2P protocol ${proto#*:}. Rule: \"$rule\""
;;
esac
}
# Set source variables. The 'cli' variable will hold the client match predicate(s).
cli=
case "$client" in
-)
;;
*:*)
rule_interface_verify ${client%:*}
cli="$(match_source_dev ${client%:*}) $(source_ip_range ${client#*:})"
;;
*.*.*|+*)
cli="$(source_ip_range $client)"
;;
~*|!~*)
cli=$(mac_match $client)
;;
*)
if [ -n "$client" ]; then
rule_interface_verify $client
cli="$(match_source_dev $client)"
fi
;;
esac
# Set destination variables - 'serv' and 'dest_interface' hold the server match predicate(s).
dest_interface=
serv=
case "$server" in
-)
;;
*.*.*|+*)
serv=$server
;;
~*|!~*)
fatal_error "Rule \"$rule\" - Destination may not be specified by MAC Address"
;;
*)
if [ -n "$server" ]; then
[ -n "$nonat" ] && fatal_error "Destination interface not allowed with $logtarget"
rule_interface_verify $server
dest_interface="$(match_dest_dev $server)"
fi
;;
esac
# Setup protocol and port variables
sports=
dports=
proto=$protocol
addr=$address
servport=$serverport
multiport=
user="$userandgroup"
# Restore $chain to the canonical chain.
chain=$logchain
[ x$port = x- ] && port=
[ x$cport = x- ] && cport=
case $proto in
tcp|TCP|6)
do_ports
;;
tcp:syn)
proto="tcp --syn"
do_ports
;;
udp|UDP|17)
do_ports
;;
icmp|ICMP|1)
[ -n "$port" ] && dports="--icmp-type $port"
;;
all|ALL)
[ -n "$port" ] && \
fatal_error "Port number not allowed with protocol \"all\"; rule: \"$rule\""
proto=
;;
ipp2p|IPP2P|ipp2p:*|IPP2P:*)
do_ipp2p
;;
*)
[ -n "$port" ] && \
fatal_error "Port number not allowed with protocol \"$proto\"; rule: \"$rule\""
;;
esac
proto="${proto:+-p $proto}"
# Some misc. setup
case "$logtarget" in
ACCEPT|DROP|REJECT|CONTINUE)
if [ -z "$proto" -a -z "$cli" -a -z "$serv" -a -z "$servport" -a -z "$user" -a -z "$excludesource" -a -z "$excludedest" ] ; then
error_message "WARNING -- Rule \"$rule\" is a POLICY"
error_message " -- and should be moved to the policy file"
fi
;;
REDIRECT)
[ -n "$excludedest" ] && fatal_error "Invalid DEST for this ACTION; rule \"$rule\""
[ -n "$serv" ] && \
fatal_error "REDIRECT rules cannot specify a server IP; rule: \"$rule\""
servport=${servport:=$port}
natrule=Yes
;;
DNAT|SAME)
[ -n "$excludedest" ] && fatal_error "Invalid DEST for this ACTION; rule \"$rule\""
[ -n "$serv" ] || \
fatal_error "$logtarget rules require a server address; rule: \"$rule\""
natrule=Yes
;;
LOG)
[ -z "$loglevel" ] && \
fatal_error "LOG requires log level"
;;
esac
case $SECTION in
ESTABLISHED|RELATED)
[ -n "$FASTACCEPT" ] && fatal_error "Entries in the $SECTION SECTION of the rules file not permitted with FASTACCEPT=Yes"
state="-m state --state $SECTION"
;;
*)
state=
;;
esac
if [ -n "${serv}${servport}" ]; then
# A specific server or server port given
if [ -n "$natrule" ]; then
add_nat_rule
[ $policy = ACCEPT ] && return
elif [ -n "$servport" -a "$servport" != "$port" ]; then
fatal_error "Only DNAT, SAME and REDIRECT rules may specify destination port mapping; rule \"$rule\""
fi
if [ -n "${excludesource}${excludedest}" ]; then
handle_exclusion
fi
if [ -z "$dnat_only" ]; then
if [ -n "$serv" ]; then
for serv1 in $(separate_list $serv); do
for srv in $(firewall_ip_range $serv1); do
if [ -n "$addr" -a -n "$CONNTRACK_MATCH" ]; then
if [ "$addr" = detect ]; then
indent >&3 << __EOF__
run_iptables -A $chain $state $proto $ratelimit $multiport $cli $sports $(dest_ip_range $srv) $dports -m conntrack --ctorigdst \$adr $user -j $target
done
__EOF__
else
for adr in $(separate_list $addr); do
if [ -n "$loglevel" -a -z "$natrule" ]; then
log_rule_limit $loglevel $chain $logchain $logtarget "$ratelimit" "$logtag" -A -m conntrack --ctorigdst $adr \
$user $(fix_bang $proto $sports $multiport $cli $(dest_ip_range $srv) $dports) $state
fi
run_iptables2 -A $chain $state $proto $ratelimit $multiport $cli $sports \
$(dest_ip_range $srv) $dports -m conntrack --ctorigdst $adr $user -j $target
done
fi
else
if [ -n "$loglevel" -a -z "$natrule" ]; then
log_rule_limit $loglevel $chain $logchain $logtarget "$ratelimit" "$logtag" -A $user \
$state $(fix_bang $proto $sports $multiport $cli $(dest_ip_range $srv) $dports)
fi
if [ -n "$nonat" ]; then
addnatrule $(dnat_chain $source) $proto $multiport \
$cli $sports $(dest_ip_range $srv) $dports $ratelimit $user -j RETURN
fi
if [ "$logtarget" != NONAT ]; then
run_iptables2 -A $chain $state $proto $multiport $cli $sports \
$(dest_ip_range $srv) $dports $ratelimit $user -j $target
fi
fi
done
done
else
if [ -n "$loglevel" -a -z "$natrule" ]; then
log_rule_limit $loglevel $chain $logchain $logtarget "$ratelimit" "$logtag" -A $user \
$state $(fix_bang $proto $sports $multiport $cli $dports)
fi
[ -n "$nonat" ] && \
addnatrule $(dnat_chain $source) $proto $multiport \
$cli $sports $dports $ratelimit $user -j RETURN
[ "$logtarget" != NONAT ] && \
run_iptables2 -A $chain $state $proto $multiport $cli $sports \
$dports $ratelimit $user -j $target
fi
fi
else
# Destination is a simple zone
if [ -n "${excludesource}${excludedest}" ]; then
handle_exclusion
fi
if [ -n "$addr" ]; then
for adr in $(separate_list $addr); do
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel $chain $logchain $logtarget "$ratelimit" "$logtag" -A $user \
$state $(fix_bang $proto $multiport $cli $dest_interface $sports $dports -m conntrack --ctorigdst $adr)
fi
if [ "$logtarget" != LOG ]; then
if [ -n "$nonat" ]; then
addnatrule $(dnat_chain $source) $proto $multiport \
$cli $sports $dports $ratelimit $user -m conntrack --ctorigdst $adr -j RETURN
fi
if [ "$logtarget" != NONAT ]; then
run_iptables2 -A $chain $state $proto $multiport $cli $dest_interface \
$sports $dports $ratelimit $user -m conntrack --ctorigdst $adr -j $target
fi
fi
done
else
if [ -n "$loglevel" ]; then
log_rule_limit $loglevel $chain $logchain $logtarget "$ratelimit" "$logtag" -A $user \
$state $(fix_bang $proto $multiport $cli $dest_interface $sports $dports)
fi
if [ "$logtarget" != LOG ]; then
if [ -n "$nonat" ]; then
addnatrule $(dnat_chain $source) $proto $multiport \
$cli $sports $dports $ratelimit $user -j RETURN
fi
if [ "$logtarget" != NONAT ]; then
run_iptables2 -A $chain $state $proto $multiport $cli $dest_interface \
$sports $dports $ratelimit $user -j $target
fi
fi
fi
fi
}
# # # # # F u n c t i o n B o d y # # # # #
[ "x$ratelimit" = "x-" ] && ratelimit=
if [ -n "$ratelimit" ]; then
case $ratelimit in
*:*)
ratelimit="-m limit --limit ${ratelimit%:*} --limit-burst ${ratelimit#*:}"
;;
*)
ratelimit="-m limit --limit $ratelimit"
;;
esac
fi
# Isolate log level
if [ "$target" = "${target%:*}" ]; then
loglevel=
else
loglevel="${target#*:}"
target="${target%%:*}"
expandv loglevel
if [ "$loglevel" != "${loglevel%:*}" ]; then
logtag="${loglevel#*:}"
loglevel="${loglevel%:*}"
expandv logtag
fi
case $loglevel in
none*)
loglevel=
[ $target = LOG ] && return
;;
esac
loglevel=${loglevel%\!}
fi
#
# Save the original target in 'logtarget' for logging rules
#
logtarget=${target%-}
#
# Targets ending in "-" only apply to the nat table
#
[ $target = $logtarget ] && dnat_only= || dnat_only=Yes
# Tranform the rule:
#
# - parse the user specification
# - set 'target' to the filter table target.
# - make $FW the destination for REDIRECT
# - remove '-' suffix from logtargets while setting 'dnat_only'
# - clear 'address' if it has been set to '-'
[ "x$userspec" = x- ] && userspec=
[ "x$address" = "x-" ] && address=
if [ -n "$userspec" ]; then
userandgroup="-m owner"
case "$userspec" in
!*+*)
if [ -n "${userspec#*+}" ]; then
userandgroup="$userandgroup ! --cmd-owner ${userspec#*+}"
fi
userspec=${userspec%+*}
;;
*+*)
if [ -n "${userspec#*+}" ]; then
userandgroup="$userandgroup --cmd-owner ${userspec#*+}"
fi
userspec=${userspec%+*}
;;
esac
case "$userspec" in
!*:*)
if [ "$userspec" != "!:" ]; then
temp="${userspec#!}"
temp="${temp%:*}"
[ -n "$temp" ] && userandgroup="$userandgroup ! --uid-owner $temp"
temp="${userspec#*:}"
[ -n "$temp" ] && userandgroup="$userandgroup ! --gid-owner $temp"
fi
;;
*:*)
if [ "$userspec" != ":" ]; then
temp="${userspec%:*}"
[ -n "$temp" ] && userandgroup="$userandgroup --uid-owner $temp"
temp="${userspec#*:}"
[ -n "$temp" ] && userandgroup="$userandgroup --gid-owner $temp"
fi
;;
!*)
[ "$userspec" != "!" ] && userandgroup="$userandgroup ! --uid-owner ${userspec#!}"
;;
*)
[ -n "$userspec" ] && userandgroup="$userandgroup --uid-owner $userspec"
;;
esac
[ "$userandgroup" = "-m owner" ] && userandgroup=
fi
case $target in
ACCEPT+|NONAT)
[ $SECTION = NEW ] || fatal_error "$target rules are not allowed in the $SECTION SECTION"
nonat=Yes
target=ACCEPT
;;
ACCEPT|LOG)
;;
DROP)
[ -n "$ratelimit" ] && fatal_error "Rate Limiting not available with DROP"
;;
REJECT)
target=reject
;;
CONTINUE)
target=RETURN
;;
DNAT*|SAME*)
[ $SECTION = NEW ] || fatal_error "$target rules are not allowed in the $SECTION SECTION"
target=ACCEPT
address=${address:=detect}
;;
REDIRECT*)
[ $SECTION = NEW ] || fatal_error "REDIRECT rules are not allowed in the $SECTION SECTION"
target=ACCEPT
address=${address:=all}
if [ "x-" = "x$servers" ]; then
servers=$FW
else
servers="$FW::$servers"
fi
;;
*-)
[ $SECTION = NEW ] || fatal_error "$target rules are not allowed in the $SECTION SECTION"
;;
esac
# Parse and validate source
if [ "$clients" = "${clients%:*}" ]; then
clientzone="$clients"
clients=
else
clientzone="${clients%%:*}"
clients="${clients#*:}"
[ -z "$clientzone" -o -z "$clients" ] && \
fatal_error "Empty source zone or qualifier: rule \"$rule\""
fi
excludesource=
case $clients in
*!*!*)
fatal_error "Invalid SOURCE in rule \"$rule\""
;;
!*)
if [ $(list_count $clients) -gt 1 ]; then
excludesource=${clients#!}
clients=
fi
;;
*!*)
excludesource=${clients#*!}
clients=${clients%!*}
;;
esac
validate_zone $clientzone || fatal_error "Undefined Client Zone in rule \"$rule\""
# Parse and validate destination
source=$clientzone
if [ $source = $FW ]; then
source_hosts=
elif [ -n "$userspec" ]; then
fatal_error "Invalid use of a user-qualification: rule \"$rule\""
else
eval source_hosts=\"\$${source}_hosts\"
fi
if [ "$servers" = "${servers%:*}" ] ; then
serverzone="$servers"
servers=
serverport=
else
serverzone="${servers%%:*}"
servers="${servers#*:}"
if [ "$servers" != "${servers%:*}" ] ; then
serverport="${servers#*:}"
servers="${servers%:*}"
[ -z "$serverzone" -o -z "$serverport" ] && \
fatal_error "Empty destination zone or server port: rule \"$rule\""
if [ $(list_count $servers) -gt 1 ]; then
case $servers in
!*)
fatal_error "Exclude lists not supported in the DEST column"
;;
esac
fi
else
serverport=
[ -z "$serverzone" -o -z "$servers" ] && \
fatal_error "Empty destination zone or qualifier: rule \"$rule\""
fi
fi
excludedest=
case $servers in
*!*!*)
fatal_error "Invalid DEST in rule \"$rule\""
;;
!*)
if [ $(list_count $servers) -gt 1 ]; then
excludedest=${servers#*!}
servers=
fi
;;
*!*)
excludedest=${servers#*!}
servers=${servers%!*}
;;
esac
if ! validate_zone $serverzone; then
fatal_error "Undefined Server Zone in rule \"$rule\""
fi
dest=$serverzone
# Ensure that this rule doesn't apply to a NONE policy pair of zones
chain=${source}2${dest}
# If we have one or more exclusion lists, we will create a new chain and
# store it's name in 'chain'. We still want log rules to reflect the
# canonical chain so we store it's name in $logchain.
logchain=$chain
eval policy=\$${chain}_policy
[ -z "$policy" ] && \
fatal_error "No policy defined from zone $source to zone $dest"
[ $policy = NONE ] && \
fatal_error "Rules may not override a NONE policy: rule \"$rule\""
[ "x$protocol" = "x-" ] && protocol=all || protocol=${protocol:=all}
ensurechain $chain
# Generate Netfilter rule(s)
case $logtarget in
DNAT*|SAME)
if [ -n "$XMULTIPORT" ] && \
! list_search $protocol "icmp" "ICMP" "1" && \
[ $(( $(list_count $ports) + $(list_count1 $(split $ports ) ) )) -le 16 -a \
$(( $(list_count $cports) + $(list_count1 $(split $cports ) ) )) -le 16 ]
then
#
# Extended MULTIPORT is enabled, and less than
# 16 ports are listed (port ranges count as two ports) - use multiport match.
#
multioption="-m multiport"
for client in $(separate_list ${clients:=-}); do
#
# add_a_rule() modifies these so we must set their values each time
#
server=${servers:=-}
port=${ports:=-}
cport=${cports:=-}
add_a_rule
done
elif [ -n "$MULTIPORT" ] && \
! list_search $protocol "icmp" "ICMP" "1" && \
[ "$ports" = "${ports%:*}" -a \
"$cports" = "${cports%:*}" -a \
$(list_count $ports) -le 15 -a \
$(list_count $cports) -le 15 ]
then
#
# MULTIPORT is enabled, there are no port ranges in the rule and less than
# 16 ports are listed - use multiport match.
#
multioption="-m multiport"
for client in $(separate_list ${clients:=-}); do
#
# add_a_rule() modifies these so we must set their values each time
#
server=${servers:=-}
port=${ports:=-}
cport=${cports:=-}
add_a_rule
done
else
#
# MULTIPORT is disabled or the rule isn't compatible with multiport match
#
multioption=
for client in $(separate_list ${clients:=-}); do
for port in $(separate_list ${ports:=-}); do
for cport in $(separate_list ${cports:=-}); do
server=${servers:=-}
add_a_rule
done
done
done
fi
;;
*)
if [ -n "$XMULTIPORT" ] && \
! list_search $protocol "icmp" "ICMP" "1" && \
[ $(( $(list_count $ports) + $(list_count1 $(split $ports ) ) )) -le 16 -a \
$(( $(list_count $cports) + $(list_count1 $(split $cports ) ) )) -le 16 ]
then
#
# Extended MULTIPORT is enabled, and less than
# 16 ports are listed (port ranges count as two ports) - use multiport match.
#
multioption="-m multiport"
for client in $(separate_list ${clients:=-}); do
for server in $(separate_list ${servers:=-}); do
#
# add_a_rule() modifies these so we must set their values each time
#
port=${ports:=-}
cport=${cports:=-}
add_a_rule
done
done
elif [ -n "$MULTIPORT" ] && \
! list_search $protocol "icmp" "ICMP" "1" && \
[ "$ports" = "${ports%:*}" -a \
"$cports" = "${cports%:*}" -a \
$(list_count $ports) -le 15 -a \
$(list_count $cports) -le 15 ]
then
#
# MULTIPORT is enabled, there are no port ranges in the rule and less than
# 16 ports are listed - use multiport match.
#
multioption="-m multiport"
for client in $(separate_list ${clients:=-}); do
for server in $(separate_list ${servers:=-}); do
#
# add_a_rule() modifies these so we must set their values each time
#
port=${ports:=-}
cport=${cports:=-}
add_a_rule
done
done
else
#
# MULTIPORT is disabled or the rule isn't compatible with multiport match
#
multioption=
for client in $(separate_list ${clients:=-}); do
for server in $(separate_list ${servers:=-}); do
for port in $(separate_list ${ports:=-}); do
for cport in $(separate_list ${cports:=-}); do
add_a_rule
done
done
done
done
fi
;;
esac
#
# Report Result
#
progress_message " Rule \"$rule\" $DONE."
save_progress_message_short " Rule \"$rule\" added."
}
#
# Process a macro invocation in the rules file
#
process_macro() # $1 = target
# $2 = param
# $2 = clients
# $3 = servers
# $4 = protocol
# $5 = ports
# $6 = cports
# $7 = address
# $8 = ratelimit
# $9 = userspec
{
local itarget="$1"
local param="$2"
local iclients="$3"
local iservers="$4"
local iprotocol="$5"
local iports="$6"
local icports="$7"
local iaddress="$8"
local iratelimit="$9"
local iuserspec="${10}"
progress_message "..Expanding Macro $(find_file macro.${itarget%%:*})..."
while read mtarget mclients mservers mprotocol mports mcports mratelimit muserspec; do
expandv mtarget mclients mservers mprotocol mports mcports mratelimit muserspec
mtarget=$(merge_levels $itarget $mtarget)
case $mtarget in
PARAM|PARAM:*)
[ -n "$param" ] && mtarget=$(substitute_action $param $mtarget) || fatal_error "PARAM requires that a parameter be supplied in macro invocation"
;;
esac
case ${mtarget%%:*} in
ACCEPT|ACCEPT+|NONAT|DROP|REJECT|DNAT|DNAT-|REDIRECT|REDIRECT-|LOG|CONTINUE|QUEUE|SAME|SAME-)
;;
*)
if list_search ${mtarget%%:*} $ACTIONS; then
if ! list_search $mtarget $USEDACTIONS; then
createactionchain $mtarget
USEDACTIONS="$USEDACTIONS $mtarget"
fi
mtarget=$(find_logactionchain $mtarget)
else
fatal_error "Invalid Action in rule \"$mtarget ${mclients:--} ${mservers:--} ${mprotocol:--} ${mports:--} ${mcports:--} ${xaddress:--} ${mratelimit:--} ${muserspec:--}\""
fi
;;
esac
if [ -n "$mclients" ]; then
case $mclients in
-|SOURCE)
mclients=${iclients}
;;
DEST)
mclients=${iservers}
;;
*)
mclients=$(merge_macro_source_dest $mclients $iclients)
;;
esac
else
mclients=${iclients}
fi
if [ -n "$mservers" ]; then
case $mservers in
-|DEST)
mservers=${iservers}
;;
SOURCE)
mservers=${iclients}
;;
*)
mservers=$(merge_macro_source_dest $mservers $iservers)
;;
esac
else
mservers=${iservers}
fi
[ -n "$iprotocol" ] && [ "x${iprotocol}" != x- ] && mprotocol=$iprotocol
[ -n "$iports" ] && [ "x${iports}" != x- ] && mports=$iports
[ -n "$icports" ] && [ "x${icports}" != x- ] && mcports=$icports
[ -n "$iratelimit" ] && [ "x${iratelimit}" != x- ] && mratelimit=$iratelimit
[ -n "$iuserspec" ] && [ "x${iuserspec}" != x- ] && muserspec=$iuserspec
rule="$mtarget ${mclients=-} ${mservers:=-} ${mprotocol:=-} ${mports:=-} ${mcports:=-} ${xaddress:=-} ${mratelimit:=-} ${muserspec:=-}"
process_rule $mtarget $mclients $mservers $mprotocol $mports $mcports ${iaddress:=-} $mratelimit $muserspec
done < $TMP_DIR/macro.${itarget%%:*}
progress_message "..End Macro"
}
#
# Process the rules file
#
process_rules()
{
#
# Process a rule where the source or destination is "all"
#
process_wildcard_rule() # $1 = Yes, if this is a macro, $2 = Yes if we want intrazone traffic
{
local yclients yservers ysourcezone ydestzone ypolicy
for yclients in $xclients; do
for yservers in $xservers; do
ysourcezone=${yclients%%:*}
ydestzone=${yservers%%:*}
if [ "${ysourcezone}" != "${ydestzone}" -o "$2" = Yes ] ; then
eval ypolicy=\$${ysourcezone}2${ydestzone}_policy
if [ "$ypolicy" != NONE ] ; then
if [ "$1" = Yes ]; then
process_macro $xtarget "$xparam" $yclients $yservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec
else
rule="$xtarget $yclients $yservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec"
process_rule $xtarget $yclients $yservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec
fi
fi
fi
done
done
}
do_it() # $1 = "Yes" if the target is a macro.
{
expandv xprotocol xports xcports xaddress xratelimit xuserspec intrazone=
if [ -z "$SECTIONS" ]; then
finish_section ESTABLISHED,RELATED
SECTIONS="ESTABLISHED RELATED NEW"
SECTION=NEW
fi
case $xclients in
all+)
xclients=all
intrazone=Yes
;;
all+-|all-+)
xclients=all-
intrazone=Yes
;;
esac
case $xservers in
all+)
xservers=all
intrazone=Yes
;;
all+-|all-+)
xservers=all-
intrazone=Yes
;;
esac
case $xclients in
all|all-)
[ $xclients = all ] && xclients="$ZONES $FW" || xclients="$ZONES"
if [ "x$xservers" = xall ]; then
xservers="$ZONES $FW"
elif [ "x$xservers" = xall- ]; then
xservers="$ZONES"
fi
process_wildcard_rule "$1" $intrazone
return
;;
esac
case $xservers in
all|all-)
xservers="$ZONES $FW"
process_wildcard_rule "$1" $intrazone
return
;;
esac
if [ "$1" = Yes ]; then
process_macro $xtarget "$xparam" $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec
else
rule="$xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec"
process_rule $xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec
fi
}
while read xtarget xclients xservers xprotocol xports xcports xaddress xratelimit xuserspec; do
expandv xtarget xclients xservers
if [ "x$xclients" = xnone -o "x$servers" = xnone ]; then
rule="$xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec"
progress_message " Rule \"$rule\" ignored."
continue
fi
case "${xtarget%%:*}" in
ACCEPT|ACCEPT+|NONAT|DROP|REJECT|DNAT|DNAT-|REDIRECT|REDIRECT-|LOG|CONTINUE|QUEUE|SAME|SAME-)
do_it No
;;
SECTION)
list_search $xclients $SECTIONS && fatal_error "Duplicate or out of order SECTION $xclients"
case $xclients in
ESTABLISHED)
SECTIONS=ESTABLISHED
;;
RELATED)
finish_section ESTABLISHED
SECTIONS="ESTABLISHED RELATED"
;;
NEW)
[ $SECTION = RELATED ] && finish_section RELATED || finish_section ESTABLISHED,RELATED
SECTIONS="ESTABLISHED RELATED NEW"
;;
*)
fatal_error "Invalid SECTION $xclients"
;;
esac
[ -n "$xservers" ] && fatal_error "Invalid SECTION $xclients $xservers"
SECTION=$xclients
;;
*)
if list_search ${xtarget%%:*} $ACTIONS; then
if ! list_search $xtarget $USEDACTIONS; then
createactionchain $xtarget
USEDACTIONS="$USEDACTIONS $xtarget"
fi
xtarget=$(find_logactionchain $xtarget)
do_it No
else
xtarget1=$(map_old_action ${xtarget%%:*})
case $xtarget1 in
*/*)
xparam=${xtarget1#*/}
xtarget1=${xtarget1%%/*}
xtarget=$(substitute_action $xtarget1 $xtarget)
;;
*)
xparam=
;;
esac
f=macro.$xtarget1
if [ -f $TMP_DIR/$f ]; then
do_it Yes
else
fn=$(find_file $f)
if [ -f $fn ]; then
strip_file $f $fn
do_it Yes
else
rule="$xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec"
fatal_error "Invalid Action in rule \"$rule\""
fi
fi
fi
;;
esac
done < $TMP_DIR/rules
case $SECTION in
ESTABLISHED)
finish_section ESTABLISHED,RELATED
;;
RELATED)
finish_section RELATED
;;
esac
SECTION=DONE
}
#
# Process a record from the tos file
#
# The caller has loaded the column contents from the record into the following
# variables:
#
# src dst protocol sport dport tos
#
# and has loaded a space-separated list of their values in "rule".
#
process_tos_rule() {
#
# Parse the contents of the 'src' variable
#
if [ "$src" = "${src%:*}" ]; then
srczone="$src"
src=
else
srczone="${src%:*}"
src="${src#*:}"
fi
source=
#
# Validate the source zone
#
if validate_zone $srczone; then
source=$srczone
elif [ "$srczone" = "all" ]; then
source="all"
else
error_message "WARNING: Undefined Source Zone - rule \"$rule\" ignored"
return
fi
[ -n "$src" ] && case "$src" in
*.*.*|+*|!+*)
#
# IP Address or networks
#
src="$(source_ip_range $src)"
;;
~*|!~*)
src=$(mac_match $src)
;;
*)
#
# Assume that this is a device name
#
if ! verify_interface $src ; then
error_message "WARNING: Unknown Interface in rule \"$rule\" ignored"
return
fi
src="$(match_source_dev $src)"
;;
esac
#
# Parse the contents of the 'dst' variable
#
if [ "$dst" = "${dst%:*}" ]; then
dstzone="$dst"
dst=
else
dstzone="${dst%:*}"
dst="${dst#*:}"
fi
dest=
#
# Validate the destination zone
#
if validate_zone $dstzone; then
dest=$dstzone
elif [ "$dstzone" = "all" ]; then
dest="all"
else
error_message \
"WARNING: Undefined Destination Zone - rule \"$rule\" ignored"
return
fi
[ -n "$dst" ] && case "$dst" in
*.*.*|+*|!+*)
#
# IP Address or networks
#
;;
*)
#
# Assume that this is a device name
#
error_message \
"WARNING: Invalid Destination - rule \"$rule\" ignored"
return
;;
esac
#
# Setup PROTOCOL and PORT variables
#
sports=""
dports=""
case $protocol in
tcp|udp|TCP|UDP|6|17)
[ -n "$sport" ] && [ "x${sport}" != "x-" ] && \
sports="--sport $sport"
[ -n "$dport" ] && [ "x${dport}" != "x-" ] && \
dports="--dport $dport"
;;
icmp|ICMP|0)
[ -n "$dport" ] && [ "x${dport}" != "x-" ] && \
dports="--icmp-type $dport"
;;
all|ALL)
protocol=
;;
*)
;;
esac
protocol="${protocol:+-p $protocol}"
tos="-j TOS --set-tos $tos"
case "$dstzone" in
all|ALL)
dst=0.0.0.0/0
;;
*)
[ -z "$dst" ] && eval dst=\$${dstzone}_hosts
;;
esac
for dest in $dst; do
dest="$(dest_ip_range $dest)"
case $srczone in
$FW)
run_iptables2 -t mangle -A outtos \
$protocol $dest $dports $sports $tos
;;
all|ALL)
run_iptables2 -t mangle -A outtos \
$protocol $dest $dports $sports $tos
run_iptables2 -t mangle -A pretos \
$protocol $dest $dports $sports $tos
;;
*)
if [ -n "$src" ]; then
run_iptables2 -t mangle -A pretos $src \
$protocol $dest $dports $sports $tos
else
eval interfaces=\$${srczone}_interfaces
for interface in $interfaces; do
run_iptables2 -t mangle -A pretos -i $interface \
$protocol $dest $dports $sports $tos
done
fi
;;
esac
done
progress_message " Rule \"$rule\" $DONE."
save_progress_message "Rule \"$rule\" Added."
}
#
# Process the tos file
#
process_tos() # $1 = name of tos file
{
progress_message2 "$DOING $1..."
strip_file tos $1
if [ -s $TMP_DIR/tos ] ; then
createmanglechain pretos
createmanglechain outtos
while read src dst protocol sport dport tos; do
expandv src dst protocol sport dport tos
rule="$(echo $src $dst $protocol $sport $dport $tos)"
process_tos_rule
done < $TMP_DIR/tos
run_iptables -t mangle -A PREROUTING -j pretos
run_iptables -t mangle -A OUTPUT -j outtos
fi
}
#
# Display elements of a list with leading white space
#
display_list() # $1 = List Title, rest of $* = list to display
{
[ $# -gt 1 ] && echo " $*"
}
policy_rules() # $1 = chain to add rules to
# $2 = policy
# $3 = loglevel
{
local target="$2"
case "$target" in
ACCEPT)
[ -n "$ACCEPT_common" ] && run_iptables -A $1 -j $ACCEPT_common
;;
DROP)
[ -n "$DROP_common" ] && run_iptables -A $1 -j $DROP_common
;;
REJECT)
[ -n "$REJECT_common" ] && run_iptables -A $1 -j $REJECT_common
target=reject
;;
QUEUE)
[ -n "$QUEUE_common" ] && run_iptables -A $1 -j $QUEUE_common
;;
CONTINUE)
target=
;;
*)
fatal_error "Invalid policy ($policy) for $1"
;;
esac
if [ $# -eq 3 -a "x${3}" != "x-" ]; then
log_rule $3 $1 $2
fi
[ -n "$target" ] && run_iptables -A $1 -j $target
}
#
# Generate default policy & log level rules for the passed client & server
# zones
#
# This function is only called when the canonical chain for this client/server
# pair is known to exist. If the default policy for this pair specifies the
# same chain then we add the policy (and logging) rule to the canonical chain;
# otherwise add a rule to the canonical chain to jump to the appropriate
# policy chain.
#
default_policy() # $1 = client $2 = server
{
local chain="${1}2${2}"
local policy=
local loglevel=
local chain1
jump_to_policy_chain() {
#
# Add a jump to from the canonical chain to the policy chain. On return,
# $chain is set to the name of the policy chain
#
run_iptables -A $chain -j $chain1
chain=$chain1
}
report_syn_flood_protection()
{
progress_message " Enabled SYN flood protection"
}
apply_default()
{
#
# Generate policy file column values from the policy chain
#
eval policy=\$${chain1}_policy
eval loglevel=\$${chain1}_loglevel
eval synparams=\$${chain1}_synparams
#
# Add the appropriate rules to the canonical chain ($chain) to enforce
# the specified policy
if [ "$chain" = "$chain1" ]; then
#
# The policy chain is the canonical chain; add policy rule to it
# The syn flood jump has already been added if required.
#
policy_rules $chain $policy $loglevel
else
#
# The policy chain is different from the canonical chain -- approach
# depends on the policy
#
case $policy in
ACCEPT|QUEUE)
if [ -n "$synparams" ]; then
#
# To avoid double-counting SYN packets, enforce the policy
# in this chain.
#
report_syn_flood_protection
policy_rules $chain $policy $loglevel
else
#
# No problem with double-counting so just jump to the
# policy chain.
#
jump_to_policy_chain
fi
;;
CONTINUE)
#
# Silly to jump to the policy chain -- add any logging
# rules and enable SYN flood protection if requested
#
[ -n "$synparams" ] && \
report_syn_flood_protection
policy_rules $chain $policy $loglevel
;;
*)
#
# DROP or REJECT policy -- enforce in the policy chain and
# enable SYN flood protection if requested.
#
[ -n "$synparams" ] && \
report_syn_flood_protection
jump_to_policy_chain
;;
esac
fi
progress_message " Policy $policy for $1 to $2 using chain $chain"
}
eval chain1=\$${1}2${2}_policychain
if [ -n "$chain1" ]; then
apply_default $1 $2
else
fatal_error "No default policy for zone $1 to zone $2"
fi
}
#
# Complete a standard chain
#
# - run any supplied user exit
# - search the policy file for an applicable policy and add rules as
# appropriate
# - If no applicable policy is found, add rules for an assummed
# policy of DROP INFO
#
complete_standard_chain() # $1 = chain, $2 = source zone, $3 = destination zone
{
local policy=
local loglevel=
local policychain=
run_user_exit $1
eval policychain=\$${2}2${3}_policychain
if [ -n "$policychain" ]; then
eval policy=\$${policychain}_policy
eval loglevel=\$${policychain}_loglevel
eval
policy_rules $1 $policy $loglevel
else
policy_rules $1 DROP info
fi
}
#
# Find the appropriate chain to pass packets from a source zone to a
# destination zone
#
# If the canonical chain for this zone pair exists, echo it's name; otherwise
# locate and echo the name of the appropriate policy chain
#
rules_chain() # $1 = source zone, $2 = destination zone
{
local chain=${1}2${2} local policy
havechain $chain && { echo $chain; return; }
[ "$1" = "$2" ] && { echo ACCEPT; return; }
eval chain=\$${chain}_policychain
eval policy=\$${chain}_policy
if [ "$policy" != CONTINUE ] ; then
[ -n "$chain" ] && { echo $chain; return; }
fatal_error "No policy defined for zone $1 to zone $2"
fi
}
#
# Set up Routing
#
setup_routes()
{
local mask=0xFF mark_op="--set-mark" save_indent="$INDENT"
[ -n "$HIGH_ROUTE_MARKS" ] && mask=0xFF00 && mark_op="--or-mark"
run_iptables -t mangle -A PREROUTING -m connmark ! --mark 0/$mask -j CONNMARK --restore-mark --mask $mask
run_iptables -t mangle -A OUTPUT -m connmark ! --mark 0/$mask -j CONNMARK --restore-mark --mask $mask
createmanglechain routemark
if [ -n "$ROUTEMARK_INTERFACES" ]; then
for interface in $ROUTEMARK_INTERFACES ; do
iface=$(chain_base $interface)
eval mark_value=\$${iface}_routemark
save_command
save_command "if [ -n \"\$${iface}_up\" ]; then"
INDENT="$INDENT "
run_iptables -t mangle -A PREROUTING -i $interface -m mark --mark 0/$mask -j routemark
run_iptables -t mangle -A routemark -i $interface -j MARK $mark_op $mark_value
INDENT="$save_indent"
save_command "fi"
done
save_command
fi
run_iptables -t mangle -A routemark -m mark ! --mark 0/$mask -j CONNMARK --save-mark --mask $mask
}
#
# Set up Source NAT (including masquerading)
#
setup_masq()
{
do_ipsec_options() {
local options="$(separate_list $ipsec)" option
policy="-m policy --pol ipsec --dir out"
for option in $options; do
case $option in
[Yy]es) ;;
strict) policy="$policy --strict" ;;
next) policy="$policy --next" ;;
reqid=*) policy="$policy --reqid ${option#*=}" ;;
spi=*) policy="$policy --spi ${option#*=}" ;;
proto=*) policy="$policy --proto ${option#*=}" ;;
mode=*) policy="$policy --mode ${option#*=}" ;;
tunnel-src=*) policy="$policy --tunnel-src ${option#*=}" ;;
tunnel-dst=*) policy="$policy --tunnel-dst ${option#*=}" ;;
reqid!=*) policy="$policy ! --reqid ${option#*=}" ;;
spi!=*) policy="$policy ! --spi ${option#*=}" ;;
proto!=*) policy="$policy ! --proto ${option#*=}" ;;
mode!=*) policy="$policy ! --mode ${option#*=}" ;;
tunnel-src!=*) policy="$policy ! --tunnel-src ${option#*=}" ;;
tunnel-dst!=*) policy="$policy ! --tunnel-dst ${option#*=}" ;;
*) fatal_error "Invalid IPSEC option \"$option\"" ;;
esac
done
}
setup_one() {
local add_snat_aliases=$ADD_SNAT_ALIASES pre_nat= policy= destnets=
[ "x$ipsec" = x- ] && ipsec=
case $ipsec in
Yes|yes)
[ -n "$POLICY_MATCH" ] || \
fatal_error "IPSEC=Yes requires policy match support in your kernel and iptables"
policy="-m policy --pol ipsec --dir out"
;;
No|no)
[ -n "$POLICY_MATCH" ] || \
fatal_error "IPSEC=No requires policy match support in your kernel and iptables"
policy="-m policy --pol none --dir out"
;;
*)
if [ -n "$ipsec" ]; then
do_ipsec_options
elif [ -n "$POLICY_MATCH" ]; then
policy="-m policy --pol none --dir out"
fi
;;
esac
case $fullinterface in
+*)
pre_nat=Yes
fullinterface=${fullinterface#+}
;;
esac
case $fullinterface in
*::*)
add_snat_aliases=
destnets="${fullinterface##*:}"
fullinterface="${fullinterface%:*}"
;;
*:*:*)
# Both alias name and networks
destnets="${fullinterface##*:}"
fullinterface="${fullinterface%:*}"
;;
*:)
add_snat_aliases=
fullinterface=${fullinterface%:}
;;
*:*)
# Alias name OR networks
case ${fullinterface#*:} in
*.*)
# It's a networks
destnets="${fullinterface#*:}"
fullinterface="${fullinterface%:*}"
;;
*)
#it's an alias name
;;
esac
;;
*)
;;
esac
interface=${fullinterface%:*}
if ! list_search $interface $ALL_INTERFACES; then
fatal_error "Unknown interface $interface"
fi
if [ "$networks" = "${networks%!*}" ]; then
nomasq=
else
nomasq="${networks#*!}"
networks="${networks%!*}"
fi
source="${networks:=0.0.0.0/0}"
detectinterface=
case $source in
*.*.*|+*|!+*)
;;
*)
detectinterface=$networks
networks=
;;
esac
[ "x$proto" = x- ] && proto=
[ "x$ports" = x- ] && ports=
if [ -n "$proto" ]; then
displayproto="($proto)"
case $proto in
tcp|TCP|udp|UDP|6|17)
if [ -n "$ports" ]; then
displayproto="($proto $ports)"
listcount=$(list_count $ports)
if [ $listcount -gt 1 ]; then
case $ports in
*:*)
if [ -n "$XMULTIPORT" ]; then
if [ $(($listcount + $(list_count1 $(split $ports) ) )) -le 16 ]; then
ports="-m multiport --dports $ports"
else
fatal_error "More than 15 entries in port list ($ports)"
fi
else
fatal_error "Port Range not allowed in list ($ports)"
fi
;;
*)
if [ -n "$MULTIPORT" ]; then
[ $listcount -le 15 ] || fatal_error "More than 15 entries in port list ($ports)"
ports="-m multiport --dports $ports"
else
fatal_error "Port Ranges require multiport match support in your kernel ($ports)"
fi
;;
esac
else
ports="--dport $ports"
fi
fi
;;
*)
[ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
;;
esac
proto="-p $proto"
else
displayproto="(all)"
[ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
fi
destination=${destnets:=0.0.0.0/0}
[ -z "$pre_nat" ] && chain=$(masq_chain $interface) || chain=$(snat_chain $interface)
ensurenatchain $chain
case $destnets in
!*)
destnets=${destnets#!}
build_exclusion_chain newchain nat "$nomasq" "$destnets"
if [ -n "$networks" ]; then
for s in $networks; do
addnatrule $chain $(source_ip_range $s) $proto $ports $policy -j $newchain
done
networks=
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
run_iptables -t nat -A $chain -s \$network $proto $ports $policy -j $newchain
done
__EOF__
else
addnatrule $chain -j $newchain
fi
chain=$newchain
destnets=0.0.0.0/0
proto=
ports=
policy=
[ -n "$nomasq" ] && source="$source except $nomasq"
;;
*)
if [ -n "$nomasq" ]; then
build_exclusion_chain newchain nat $nomasq
if [ -n "$networks" ]; then
for s in $networks; do
for destnet in $(separate_list $destnets); do
addnatrule $chain $(both_ip_ranges $s $destnet) $proto $ports $policy -j $newchain
done
done
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
__EOF__
for destnet in $(separate_list $destnets); do
indent >&3 << __EOF__
run_iptables -t nat -A $chain -s \$network $(dest_ip_range $destnet) $proto $sports $policy -j $netchain
__EOF__
done
indent >&3 << __EOF__
done
__EOF__
else
for destnet in $(separate_list $destnets); do
addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $newchain
done
fi
chain=$newchain
networks=
destnets=0.0.0.0/0
proto=
ports=
policy=
source="$source except $nomasq"
fi
;;
esac
addrlist=
target=MASQUERADE
[ "x$addresses" = x- ] && addresses=
if [ -n "$addresses" ]; then
case "$addresses" in
SAME:nodst:*)
target="SAME --nodst"
addresses=${addresses#SAME:nodst:}
if [ "$addresses" = detect ]; then
addrlist='$addrlist'
else
for address in $(separate_list $addresses); do
addrlist="$addrlist --to $address";
done
fi
;;
SAME:*)
target="SAME"
addresses=${addresses#SAME:}
if [ "$addresses" = detect ]; then
addrlist='$addrlist'
else
for address in $(separate_list $addresses); do
addrlist="$addrlist --to $address";
done
fi
;;
detect)
target=SNAT
addrlist='$addrlist'
;;
*)
for address in $(separate_list $addresses); do
case $address in
*.*.*.*)
target=SNAT
addrlist="$addrlist --to-source $address"
;;
*)
addrlist="$addrlist --to-ports ${address#:}"
;;
esac
done
;;
esac
if [ "$addrlist" = '$addrlist' ]; then
addresses='$(combine_list $addresses)'
indent >&3 << __EOF__
addrlist=
addressses=\$(find_interface_addresses $interface)
if [ -n "\$addresses" ]; then
for address in \$addresses; do
addrlist="$addrlist --to-source $address"
done
else
fatal_error "Unable to determine the IP address(es) of $interface"
fi
__EOF__
elif [ -n "$add_snat_aliases" ]; then
for address in $(separate_list $addresses); do
address=${address%:)}
if [ -n "$address" ]; then
for addr in $(ip_range_explicit ${address%:*}) ; do
if ! list_search $addr $ALIASES_TO_ADD; then
[ -n "$RETAIN_ALIASES" ] || save_command del_ip_addr $addr $interface
ALIASES_TO_ADD="$ALIASES_TO_ADD $addr $fullinterface"
case $fullinterface in
*:*)
fullinterface=${fullinterface%:*}:$((${fullinterface#*:} + 1 ))
;;
esac
fi
done
fi
done
fi
fi
if [ -n "$networks" ]; then
for network in $networks; do
for destnet in $(separate_list $destnets); do
addnatrule $chain $(both_ip_ranges $network $destnet) $proto $ports $policy -j $target $addrlist
done
if [ -n "$addresses" ]; then
progress_message_and_save " To $destination $displayproto from $network through ${interface} using $addresses"
else
progress_message_and_save " To $destination $displayproto from $network through ${interface}"
fi
done
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
__EOF__
for destnet in $(separate_list $destnets); do
indent >&3 << __EOF__
run_iptables -t nat -A $chain -s \$network $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
__EOF__
done
if [ -n "$addresses" ]; then
message=" To $destination $displayproto from \$network through ${interface} using $addresses"
else
message=" To $destination $displayproto from \$network through ${interface}"
fi
indent >&3 << __EOF__
progress_message "$message"
done
__EOF__
else
for destnet in $(separate_list $destnets); do
addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
done
if [ -n "$addresses" ]; then
progress_message_and_save " To $destination $displayproto from $source through ${interface} using $addresses"
else
progress_message_and_save " To $destination $displayproto from $source through ${interface}"
fi
fi
}
strip_file masq $1
if [ -n "$NAT_ENABLED" ]; then
progress_message2 "$DOING Masquerading/SNAT"
save_progress_message "Setting up Masquerading/SNAT..."
fi
while read fullinterface networks addresses proto ports ipsec; do
expandv fullinterface networks addresses proto ports ipsec
if [ -n "$NAT_ENABLED" ]; then
setup_one
else
error_message "WARNING: NAT disabled; masq rule ignored"
fi
done < $TMP_DIR/masq
}
#
# Add a record to the blacklst chain
#
# $source = address match
# $proto = protocol selector
# $dport = destination port selector
#
add_blacklist_rule() {
if [ -n "$BLACKLIST_LOGLEVEL" ]; then
log_rule $BLACKLIST_LOGLEVEL blacklst $BLACKLIST_DISPOSITION $(fix_bang $source $proto $dport)
fi
run_iptables2 -A blacklst $source $proto $dport -j $disposition
}
#
# Process a record from the blacklist file
#
# $networks = address/networks
# $protocol = Protocol Number/Name
# $port = Port Number/Name
#
process_blacklist_rec() {
local source
local addr
local proto
local dport
local temp
local setname
for addr in $(separate_list $networks); do
case $addr in
-)
source=
;;
~*|!~*)
addr=$(echo $addr | sed 's/~//;s/-/:/g')
source="--match mac --mac-source $addr"
;;
*)
source="$(source_ip_range $addr)"
;;
esac
if [ -n "$protocol" ]; then
proto=" -p $protocol "
case $protocol in
tcp|TCP|6|udp|UDP|17)
if [ -n "$ports" ]; then
if [ -n "$MULTIPORT" -a \
"$ports" != "${ports%,*}" -a \
"$ports" = "${ports%:*}" -a \
$(list_count $ports) -le 15 ]
then
dport="-m multiport --dports $ports"
add_blacklist_rule
else
for dport in $(separate_list $ports); do
dport="--dport $dport"
add_blacklist_rule
done
fi
else
add_blacklist_rule
fi
;;
icmp|ICMP|0)
if [ -n "$ports" ]; then
for dport in $(separate_list $ports); do
dport="--icmp-type $dport"
add_blacklist_rule
done
else
add_blacklist_rule
fi
;;
*)
add_blacklist_rule
;;
esac
else
add_blacklist_rule
fi
if [ -n "$ports" ]; then
addr="$addr $protocol $ports"
elif [ -n "$protocol" ]; then
addr="$addr $protocol"
fi
progress_message_and_save " $addr added to Black List"
done
}
#
# Setup the Black List
#
setup_blacklist() {
local hosts="$(find_hosts_by_option blacklist)"
local f=$(find_file blacklist)
local disposition=$BLACKLIST_DISPOSITION
local ipsec policy
if [ -n "$hosts" -a -f $f ]; then
progress_message2 "$DOING Blacklisting..."
strip_file blacklist $f
createchain blacklst no
[ -n "$BLACKLISTNEWONLY" ] && state="-m state --state NEW,INVALID" || state=
for host in $hosts; do
ipsec=${host%^*}
host=${host#*^}
[ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
interface=${host%%:*}
network=${host#*:}
for chain in $(first_chains $interface); do
run_iptables -A $chain $state $(match_source_hosts $network) $policy -j blacklst
done
[ $network = 0/0.0.0.0 ] && network= || network=":$network"
progress_message_and_save " Blacklisting enabled on ${interface}${network}"
done
[ "$disposition" = REJECT ] && disposition=reject
if [ -z "$DELAYBLACKLISTLOAD" ]; then
while read networks protocol ports; do
expandv networks protocol ports
process_blacklist_rec
done < $TMP_DIR/blacklist
fi
fi
}
#
# Refresh the Black List
#
refresh_blacklist() {
local f=$(find_file blacklist)
local disposition=$BLACKLIST_DISPOSITION
progress_message2 "$DOING Black List..."
save_progress_message "Loading Black List..."
strip_file blacklist $f
[ "$disposition" = REJECT ] && disposition=reject
run_iptables -F blacklst
while read networks protocol ports; do
expandv networks protocol ports
process_blacklist_rec
done < $TMP_DIR/blacklist
}
#
# Verify the Black List
#
validate_blacklist() {
local f=$(find_file blacklist)
local disposition=$BLACKLIST_DISPOSITION
progress_message2 "Checking Black List..."
strip_file blacklist $f
[ "$disposition" = REJECT ] && disposition=reject
while read networks protocol ports; do
expandv networks protocol ports
process_blacklist_rec
done < $TMP_DIR/blacklist
}
#
# Perform Initialization
# - Delete all old rules
# - Delete all user chains
# - Set the POLICY on all standard chains and add a rule to allow packets
# that are part of established connections
# - Determine the zones
#
initialize_netfilter () {
setup_mss()
{
case $CLAMPMSS in
Yes)
option="--clamp-mss-to-pmtu"
;;
*)
option="--set-mss $CLAMPMSS"
;;
esac
run_iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS $option
}
report_capabilities
if [ -n "$BRIDGING" ]; then
[ -n "$PHYSDEV_MATCH" ] || fatal_error "BRIDGING=Yes requires Physdev Match support in your Kernel and iptables"
fi
[ "$MACLIST_TTL" = "0" ] && MACLIST_TTL=
if [ -n "$MACLIST_TTL" -a -z "$RECENT_MATCH" ]; then
fatal_error "MACLIST_TTL requires the Recent Match capability which is not present in your Kernel and/or iptables"
fi
[ -n "$RFC1918_STRICT" -a -z "$CONNTRACK_MATCH" ] && \
fatal_error "RFC1918_STRICT=Yes requires Connection Tracking match"
progress_message2 "Determining Zones..."
determine_zones
if [ $VERBOSE -ge 1 ]; then
display_list "IPv4 Zones:" $IPV4_ZONES
[ -n "$IPSEC_ZONES" ] && \
display_list "IPSEC Zones:" $IPSEC_ZONES
display_list "Firewall Zone:" $FW
fi
progress_message2 "Validating interfaces file..."
validate_interfaces_file
progress_message2 "Validating hosts file..."
validate_hosts_file
progress_message2 "Validating Policy file..."
validate_policy
progress_message2 "Determining Hosts in Zones..."
determine_interfaces
determine_hosts
append_file init
#
# Some files might be large so strip them while the firewall is still running
# (restart command). This reduces the length of time that the firewall isn't
# accepting new connections.
#
strip_file rules
strip_file proxyarp
strip_file maclist
strip_file nat
strip_file netmap
progress_message2 "Pre-processing Actions..."
process_actions1
TERMINATOR=fatal_error
deletechain shorewall
if [ -n "$NAT_ENABLED" ]; then
delete_nat
for chain in PREROUTING POSTROUTING OUTPUT; do
qt_iptables -t nat -P $chain ACCEPT
done
fi
delete_proxy_arp
if [ -n "$MANGLE_ENABLED" ]; then
run_iptables -t mangle -F
run_iptables -t mangle -X
for chain in PREROUTING INPUT FORWARD POSTROUTING; do
qt_iptables -t mangle -P $chain ACCEPT
done
fi
if [ -n "$RAW_TABLE" ]; then
run_iptables -t raw -F
run_iptables -t raw -X
for chain in PREROUTING OUTPUT; do
qt_iptables -t raw -P $chain ACCEPT
done
fi
[ -n "$CLEAR_TC" ] && delete_tc
progress_message2 "Deleting user chains..."
save_progress_message "Deleting user chains..."
exists_INPUT=Yes
exists_OUTPUT=Yes
exists_FORWARD=Yes
process_criticalhosts
if [ -n "$CRITICALHOSTS" ]; then
setpolicy INPUT ACCEPT
setpolicy OUTPUT ACCEPT
setpolicy FORWARD DROP
deleteallchains
enable_critical_hosts
setpolicy INPUT DROP
setpolicy OUTPUT DROP
[ -n "$CLAMPMSS" ] && setup_mss
setcontinue FORWARD
setcontinue INPUT
setcontinue OUTPUT
else
setpolicy INPUT DROP
setpolicy OUTPUT DROP
setpolicy FORWARD DROP
deleteallchains
[ -n "$CLAMPMSS" ] && setup_mss
setcontinue FORWARD
setcontinue INPUT
setcontinue OUTPUT
fi
f=$(find_file ipsets)
if [ -f $f ]; then
progress_message2 "Processing $f ..."
save_progress_message "Restoring IPSETS..."
save_command "ipset -U :all: :all:"
save_command "ipset -F"
save_command "ipset -X"
save_command "ipset -R < $f"
fi
append_file continue
f=$(find_file routestopped)
progress_message2 "$DOING $f ..."
strip_file routestopped $f
process_routestopped -A
if [ -n "$DISABLE_IPV6" ]; then
save_command disable_ipv6
fi
save_progress_message "Enabling Loopback and DNS Lookups"
#
# Enable the Loopback interface for now
#
run_iptables -A INPUT -i lo -j ACCEPT
run_iptables -A OUTPUT -o lo -j ACCEPT
#
# Allow DNS lookups during startup for FQDNs
#
for chain in INPUT OUTPUT FORWARD; do
run_iptables -A $chain -p udp --dport 53 -j ACCEPT
done
accounting_file=$(find_file accounting)
[ -f $accounting_file ] && setup_accounting $accounting_file
createchain reject no
createchain dynamic no
createchain logdrop no
createchain logreject no
createchain smurfs no
log_rule ${BLACKLIST_LOGLEVEL:-info} logdrop DROP
log_rule ${BLACKLIST_LOGLEVEL:-info} logreject REJECT
run_iptables -A logdrop -j DROP
run_iptables -A logreject -j reject
indent >&3 << __EOF__
if [ -f \${VARDIR}/save ]; then
progress_message2 "Setting up dynamic rules..."
while read target ignore1 ignore2 address rest; do
case \$target in
DROP|reject|logdrop|logreject)
run_iptables -A dynamic -s \$address -j \$target
;;
esac
done < \${VARDIR}/save
fi
__EOF__
[ -n "$BLACKLISTNEWONLY" ] && state="-m state --state NEW,INVALID" || state=
progress_message2 "Creating Interface Chains..."
save_progress_message "Creating Interface Chains..."
for interface in $ALL_INTERFACES; do
for chain in $(input_chain $interface) $(forward_chain $interface); do
createchain $chain no
run_iptables -A $chain $state -j dynamic
done
done
}
#
# Construct zone-independent rules
#
add_common_rules() {
local savelogparms="$LOGPARMS"
local broadcasts="$(find_broadcasts) 255.255.255.255 224.0.0.0/4"
drop_broadcasts() {
for interface in $(find_bcastdetect_interfaces); do
indent >&3 << __EOF__
ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u | while read address; do
run_iptables -A reject -d \$address -j DROP
done
__EOF__
done
for address in $broadcasts ; do
run_iptables -A reject -d $address -j DROP
done
}
#
# Populate the smurf chain
#
save_progress_message "Setting up SMURF control..."
for interface in $(find_bcastdetect_interfaces); do
indent >&3 << __EOF__
ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u | while read address; do
__EOF__
[ -n "$SMURF_LOG_LEVEL" ] && \
indent >&3 << __EOF__
log_rule $SMURF_LOG_LEVEL smurfs DROP -s \$address
__EOF__
indent >&3 << __EOF__
run_iptables -A smurfs -s \$address -j DROP
done
__EOF__
done
for address in $broadcasts ; do
[ -n "$SMURF_LOG_LEVEL" ] && log_rule $SMURF_LOG_LEVEL smurfs DROP -s $address
run_iptables -A smurfs $(source_ip_range $address) -j DROP
run_iptables -A reject -s $address -j DROP
done
#
# Reject Rules -- Don't respond to broadcasts with an ICMP
#
if [ -n "$USEPKTTYPE" ]; then
run_iptables -A reject -m pkttype --pkt-type broadcast -j DROP
run_iptables -A reject -m pkttype --pkt-type multicast -j DROP
else
drop_broadcasts
fi
#
# Don't feed the smurfs
#
for address in $broadcasts ; do
run_iptables -A reject -s $address -j DROP
done
run_iptables -A reject -p tcp -j REJECT --reject-with tcp-reset
run_iptables -A reject -p udp -j REJECT
#
# Not all versions of iptables support these so don't complain if they don't work
#
if [ -n "$ENHANCED_REJECT" ]; then
run_iptables -A reject -p icmp -j REJECT --reject-with icmp-host-unreachable
run_iptables -A reject -j REJECT --reject-with icmp-host-prohibited
else
run_iptables -A reject -j REJECT
fi
#
# Create common action chains
#
for action in $USEDACTIONS; do
createactionchain $action
done
append_file initdone
#
# Process Black List
#
save_progress_message "Setting up Black List..."
setup_blacklist
#
# SMURFS
#
hosts=$(find_hosts_by_option nosmurfs)
if [ -n "$hosts" ]; then
progress_message2 "Adding Anti-smurf Rules"
save_progress_message "Adding Anti-smurf Jumps..."
for host in $hosts; do
ipsec=${host%^*}
host=${host#*^}
[ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
interface=${host%%:*}
network=${host#*:}
for chain in $(first_chains $interface); do
run_iptables -A $chain -m state --state NEW,INVALID $(match_source_hosts $network) $policy -j smurfs
done
done
fi
#
# DHCP
#
interfaces=$(find_interfaces_by_option dhcp)
if [ -n "$interfaces" ]; then
progress_message2 "Adding rules for DHCP"
save_progress_message "Setting up rules for DHCP..."
for interface in $interfaces; do
if [ -n "$BRIDGING" ]; then
is_bridge=$( brctl show $interface 2> /dev/null | grep ^$interface[[:space:]] )
[ -n "$is_bridge" ] && \
do_iptables -A $(forward_chain $interface) -p udp -o $interface --dport 67:68 -j ACCEPT
fi
run_iptables -A $(input_chain $interface) -p udp --dport 67:68 -j ACCEPT
run_iptables -A OUTPUT -o $interface -p udp --dport 67:68 -j ACCEPT
done
fi
#
# RFC 1918
#
hosts="$(find_hosts_by_option norfc1918)"
if [ -n "$hosts" ]; then
progress_message2 "Enabling RFC1918 Filtering"
save_progress_message "Setting up RFC1918 Filtering..."
strip_file rfc1918
createchain norfc1918 no
createchain rfc1918 no
log_rule $RFC1918_LOG_LEVEL rfc1918 DROP
run_iptables -A rfc1918 -j DROP
chain=norfc1918
if [ -n "$RFC1918_STRICT" ]; then
#
# We'll generate two chains - one for source and one for destination
#
chain=rfc1918d
createchain $chain no
elif [ -n "$MANGLE_ENABLED" -a -z "$CONNTRACK_MATCH" ]; then
#
# Mangling is enabled but conntrack match isn't available --
# create a chain in the mangle table to filter RFC1918 destination
# addresses. This must be done in the mangle table before we apply
# any DNAT rules in the nat table
#
# Also add a chain to log and drop any RFC1918 packets that we find
#
createmanglechain man1918
createmanglechain rfc1918
log_rule $RFC1918_LOG_LEVEL rfc1918 DROP -t mangle
run_iptables -t mangle -A rfc1918 -j DROP
fi
while read networks target; do
case $target in
logdrop)
target=rfc1918
s_target=rfc1918
;;
DROP)
s_target=DROP
;;
RETURN)
[ -n "$RFC1918_STRICT" ] && s_target=rfc1918d || s_target=RETURN
;;
*)
fatal_error "Invalid target ($target) for $networks"
;;
esac
for network in $(separate_list $networks); do
run_iptables2 -A norfc1918 $(source_ip_range $network) -j $s_target
if [ -n "$CONNTRACK_MATCH" ]; then
#
# We have connection tracking match -- match on the original destination
#
run_iptables2 -A $chain -m conntrack --ctorigdst $network -j $target
elif [ -n "$MANGLE_ENABLED" ]; then
#
# No connection tracking match but we have mangling -- add a rule to
# the mangle table
#
run_iptables2 -t mangle -A man1918 $(dest_ip_range $network) -j $target
fi
done
done < $TMP_DIR/rfc1918
[ -n "$RFC1918_STRICT" ] && run_iptables -A norfc1918 -j rfc1918d
for host in $hosts; do
ipsec=${host%^*}
host=${host#*^}
[ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
interface=${host%%:*}
networks=${host#*:}
for chain in $(first_chains $interface); do
run_iptables -A $chain -m state --state NEW $(match_source_hosts $networks) $policy -j norfc1918
done
[ -n "$MANGLE_ENABLED" -a -z "$CONNTRACK_MATCH" ] && \
run_iptables -t mangle -A PREROUTING -m state --state NEW -i $interface $(match_source_hosts $networks) -j man1918
done
fi
hosts=$(find_hosts_by_option tcpflags)
if [ -n "$hosts" ]; then
progress_message2 "$DOING TCP Flags checking..."
save_progress_message "Setting up TCP Flags checking..."
createchain tcpflags no
if [ -n "$TCP_FLAGS_LOG_LEVEL" ]; then
createchain logflags no
savelogparms="$LOGPARMS"
[ "$TCP_FLAGS_LOG_LEVEL" = ULOG ] || LOGPARMS="$LOGPARMS --log-ip-options"
log_rule $TCP_FLAGS_LOG_LEVEL logflags $TCP_FLAGS_DISPOSITION
LOGPARMS="$savelogparms"
case $TCP_FLAGS_DISPOSITION in
REJECT)
run_iptables -A logflags -j REJECT --reject-with tcp-reset
;;
*)
run_iptables -A logflags -j $TCP_FLAGS_DISPOSITION
;;
esac
disposition="-j logflags"
else
disposition="-j $TCP_FLAGS_DISPOSITION"
fi
run_iptables -A tcpflags -p tcp --tcp-flags ALL FIN,URG,PSH $disposition
run_iptables -A tcpflags -p tcp --tcp-flags ALL NONE $disposition
run_iptables -A tcpflags -p tcp --tcp-flags SYN,RST SYN,RST $disposition
run_iptables -A tcpflags -p tcp --tcp-flags SYN,FIN SYN,FIN $disposition
#
# There are a lot of probes to ports 80, 3128 and 8080 that use a source
# port of 0. This catches them even if they are directed at an IP that
# hosts a web server.
#
run_iptables -A tcpflags -p tcp --syn --sport 0 $disposition
for host in $hosts; do
ipsec=${host%^*}
host=${host#*^}
[ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
interface=${host%%:*}
network=${host#*:}
for chain in $(first_chains $interface); do
run_iptables -A $chain -p tcp $(match_source_hosts $network) $policy -j tcpflags
done
done
fi
#
# ARP Filtering
#
save_progress_message "Setting up ARP filtering..."
indent >&3 << __EOF__
for f in /proc/sys/net/ipv4/conf/*; do
[ -f \$f/arp_filter ] && echo 0 > \$f/arp_filter
[ -f \$f/arp_ignore ] && echo 0 > \$f/arp_ignore
done
__EOF__
interfaces=$(find_interfaces_by_option arp_filter)
interfaces1=$(find_interfaces_by_option1 arp_ignore)
if [ -n "${interfaces}${interfaces1}" ]; then
progress_message2 "$DOING ARP Filtering..."
for interface in $interfaces; do
file=/proc/sys/net/ipv4/conf/$interface/arp_filter
indent >&3 << __EOF__
if [ -f $file ]; then
echo 1 > $file
else
error_message "WARNING: Cannot set ARP filtering on $interface"
fi
__EOF__
done
for interface in $interfaces1; do
file=/proc/sys/net/ipv4/conf/$interface/arp_ignore
eval value="\$$(chain_base $interface)_arp_ignore"
indent >&3 << __EOF__
if [ -f $file ]; then
echo $value > $file
else
error_message "WARNING: Cannot set ARP filtering on $interface"
fi
__EOF__
done
fi
#
# Route Filtering
#
interfaces="$(find_interfaces_by_option routefilter)"
if [ -n "$interfaces" -o -n "$ROUTE_FILTER" ]; then
progress_message2 "$DOING Kernel Route Filtering..."
save_progress_message "Setting up Route Filtering..."
indent >&3 << __EOF__
for f in /proc/sys/net/ipv4/conf/*; do
[ -f \$f/log_martians ] && echo 0 > \$f/rp_filter
done
__EOF__
for interface in $interfaces; do
file=/proc/sys/net/ipv4/conf/$interface/rp_filter
indent >&3 << __EOF__
if [ -f $file ]; then
echo 1 > $file
else
error_message "WARNING: Cannot set route filtering on $interface"
fi
__EOF__
done
save_command "echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter"
if [ -n "$ROUTE_FILTER" ]; then
save_command "echo 1 > /proc/sys/net/ipv4/conf/default/rp_filter"
save_command "echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter"
fi
save_command "[ -n \"\$NOROUTES\" ] || ip route flush cache"
fi
#
# Martian Logging
#
interfaces="$(find_interfaces_by_option logmartians)"
if [ -n "$interfaces" -o -n "$LOG_MARTIANS" ]; then
progress_message2 "$DOING Martian Logging..."
save_progress_message "Setting up Martian Logging..."
indent >&3 << __EOF__
for f in /proc/sys/net/ipv4/conf/*; do
[ -f \$f/log_martians ] && echo 0 > \$f/log_martians
done
__EOF__
for interface in $interfaces; do
file=/proc/sys/net/ipv4/conf/$interface/log_martians
indent >&3 << __EOF__
if [ -f $file ]; then
echo 1 > $file
else
error_message "WARNING: Cannot set Martian logging on $interface"
fi
__EOF__
done
if [ -n "$LOG_MARTIANS" ]; then
save_command "echo 1 > /proc/sys/net/ipv4/conf/default/log_martians"
save_command "echo 1 > /proc/sys/net/ipv4/conf/all/log_martians"
fi
fi
#
# Source Routing
#
save_progress_message "Setting up Accept Source Routing..."
indent >&3 << __EOF__
for f in /proc/sys/net/ipv4/conf/*; do
[ -f \$f/accept_source_route ] && echo 0 > \$f/accept_source_route
done
__EOF__
interfaces=$(find_interfaces_by_option sourceroute)
if [ -n "$interfaces" ]; then
progress_message2 "$DOING Accept Source Routing..."
save_progress_message "Setting up Source Routing..."
for interface in $interfaces; do
file=/proc/sys/net/ipv4/conf/$interface/accept_source_route
indent >&3 << __EOF__
if [ -f $file ]; then
echo 1 > $file
else
error_message "WARNING: Cannot set Accept Source Routing on $interface"
fi
__EOF__
done
fi
#
# UPnP
#
interfaces=$(find_interfaces_by_option upnp)
if [ -n "$interfaces" ]; then
progress_message2 "$DOING UPnP..."
save_progress_message "Setting up UPnP..."
createnatchain UPnP
for interface in $interfaces; do
run_iptables -t nat -A PREROUTING -i $interface -j UPnP
done
fi
setup_forwarding
}
#
# Scan the policy file defining the necessary chains
# Add the appropriate policy rule(s) to the end of each canonical chain
#
apply_policy_rules() {
#
# Create policy chains
#
for chain in $ALL_POLICY_CHAINS; do
eval policy=\$${chain}_policy
eval loglevel=\$${chain}_loglevel
eval optional=\$${chain}_is_optional
if [ "$policy" != NONE ]; then
if ! havechain $chain && [ -z "$optional" -a "$policy" != CONTINUE ]; then
#
# The chain doesn't exist. Create the chain and add policy
# rules
#
createchain $chain yes
#
# If either client or server is 'all' then this MUST be
# a policy chain and we must apply the appropriate policy rules
#
# Otherwise, this is a canonical chain which will be handled in
# the for loop below
#
case $chain in
all2*|*2all)
run_user_exit $chain
policy_rules $chain $policy $loglevel
;;
esac
fi
fi
done
#
# Add policy rules to canonical chains
#
for zone in $FW $ZONES; do
for zone1 in $FW $ZONES; do
chain=${zone}2${zone1}
if havechain $chain; then
run_user_exit $chain
default_policy $zone $zone1
fi
done
done
}
#
# Activate the rules
#
activate_rules()
{
local PREROUTING_rule=1
local POSTROUTING_rule=1
#
# Jump to a NAT chain from one of the builtin nat chains
#
addnatjump() # $1 = BUILTIN chain, $2 = user chain, $3 - * other arguments
{
local sourcechain=$1 destchain=$2
shift
shift
if havenatchain $destchain ; then
run_iptables2 -t nat -A $sourcechain $@ -j $destchain
elif [ -z "$KLUDGEFREE" ]; then
[ -n "$BRIDGING" -a -f $TMP_DIR/physdev ] && -rm -f $TMP_DIR/physdev
[ -n "$IPRANGE_MATCH" -a -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
fi
}
#
# Jump to a RULES chain from one of the builtin nat chains. These jumps are
# are inserted before jumps to one-to-one NAT chains.
#
addrulejump() # $1 = BUILTIN chain, $2 = user chain, $3 - * other arguments
{
local sourcechain=$1 destchain=$2
shift
shift
if havenatchain $destchain; then
eval run_iptables2 -t nat -I $sourcechain \
\$${sourcechain}_rule $@ -j $destchain
eval ${sourcechain}_rule=\$\(\(\$${sourcechain}_rule + 1\)\)
elif [ -z "$KLUDGEFREE" ]; then
[ -n "$BRIDGING" -a -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
[ -n "$IPRANGE_MATCH" -a -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
fi
}
#
# Add jumps to early SNAT chains
#
for interface in $ALL_INTERFACES; do
addnatjump POSTROUTING $(snat_chain $interface) -o $interface
done
#
# Add jumps from the builtin chains to the nat chains
#
addnatjump PREROUTING nat_in
addnatjump POSTROUTING nat_out
for interface in $ALL_INTERFACES; do
addnatjump PREROUTING $(input_chain $interface) -i $interface
addnatjump POSTROUTING $(output_chain $interface) -o $interface
done
> $STATEDIR/chains
echo "$FW firewall" > $STATEDIR/zones
#
# Create forwarding chains for complex zones and generate jumps for IPSEC source hosts to that chain.
#
for zone in $ZONES; do
if eval test -n \"\$${zone}_is_complex\" ; then
frwd_chain=${zone}_frwd
createchain $frwd_chain No
if [ -n "$POLICY_MATCH" ]; then
#
# Because policy match only matches an 'in' or an 'out' policy (but not both), we have to place the
# '--pol ipsec --dir in' rules at the front of the interface forwarding chains. Otherwise, decrypted packets
# can match '--pol none --dir out' rules and send the packets down the wrong rules chain.
#
eval is_ipsec=\$${zone}_is_ipsec
if [ -n "$is_ipsec" ]; then
eval source_hosts=\$${zone}_hosts
else
eval source_hosts=\$${zone}_ipsec_hosts
fi
for host in $source_hosts; do
interface=${host%%:*}
networks=${host#*:}
run_iptables2 -A $(forward_chain $interface) $(match_source_hosts $networks) $(match_ipsec_in $zone $host) -j $frwd_chain
done
fi
fi
done
for zone in $ZONES; do
eval source_hosts=\$${zone}_hosts
chain1=$(rules_chain $FW $zone)
chain2=$(rules_chain $zone $FW)
eval complex=\$${zone}_is_complex
eval type=\$${zone}_type
[ -n "$complex" ] && frwd_chain=${zone}_frwd
echo $zone $type $source_hosts >> $STATEDIR/zones
need_broadcast=
for host in $source_hosts; do
interface=${host%%:*}
networks=${host#*:}
[ -n "$chain1" ] && run_iptables2 -A OUTPUT -o $interface $(match_dest_hosts $networks) $(match_ipsec_out $zone $host) -j $chain1
#
# Add jumps from the builtin chain for DNAT rules
#
addrulejump PREROUTING $(dnat_chain $zone) -i $interface $(match_source_hosts $networks) $(match_ipsec_in $zone $host)
[ -n "$chain2" ] && run_iptables2 -A $(input_chain $interface) $(match_source_hosts $networks) $(match_ipsec_in $zone $host) -j $chain2
if [ -n "$complex" ] && ! is_ipsec_host $zone $host ; then
run_iptables2 -A $(forward_chain $interface) $(match_source_hosts $networks) $(match_ipsec_in $zone $host) -j $frwd_chain
fi
case $networks in
*.*.*.*|+*)
if [ "$networks" != 0.0.0.0/0 ]; then
if ! list_search $interface $need_broadcast ; then
interface_has_option $interface detectnets && need_broadcast="$need_broadcast $interface"
fi
fi
;;
esac
done
if [ -n "$chain1" ]; then
for interface in $need_broadcast ; do
run_iptables -A OUTPUT -o $interface -d 255.255.255.255 -j $chain1
run_iptables -A OUTPUT -o $interface -d 224.0.0.0/4 -j $chain1
done
fi
for zone1 in $ZONES; do
eval policy=\$${zone}2${zone1}_policy
[ "$policy" = NONE ] && continue
eval dest_hosts=\$${zone1}_hosts
chain="$(rules_chain $zone $zone1)"
[ -z "$chain" ] && continue # CONTINUE policy and there is no canonical chain.
if [ $zone = $zone1 ]; then
#
# Try not to generate superfluous intra-zone rules
#
eval routeback=\"\$${zone}_routeback\"
eval interfaces=\"\$${zone}_interfaces\"
eval ports="\$${zone}_ports"
num_ifaces=$(list_count1 $interfaces)
#
# If the zone has a single interface then what matters is how many ports it has
#
[ $num_ifaces -eq 1 -a -n "$ports" ] && num_ifaces=$(list_count1 $ports)
#
# If we don't need to route back and if we have only one interface or one port to
# the zone then assume that hosts in the zone can communicate directly.
#
if [ $num_ifaces -lt 2 -a -z "$routeback" ] ; then
continue
fi
else
routeback=
num_ifaces=0
fi
if [ -n "$complex" ]; then
for host1 in $dest_hosts; do
interface1=${host1%%:*}
networks1=${host1#*:}
#
# Only generate an intrazone rule if the zone has more than one interface (port) or if
# routeback was specified for this host group
#
if [ $zone != $zone1 -o $num_ifaces -gt 1 ] || list_search $host1 $routeback ; then
run_iptables2 -A $frwd_chain -o $interface1 $(match_dest_hosts $networks1) $(match_ipsec_out $zone1 $host1) -j $chain
fi
done
else
for host in $source_hosts; do
interface=${host%%:*}
networks=${host#*:}
chain3=$(forward_chain $interface)
for host1 in $dest_hosts; do
interface1=${host1%%:*}
networks1=${host1#*:}
if [ "$host" != "$host1" ] || list_search $host $routeback; then
run_iptables2 -A $chain3 $(match_source_hosts $networks) -o $interface1 $(match_dest_hosts $networks1) $(match_ipsec_out $zone1 $host1) -j $chain
fi
done
done
fi
done
done
for interface in $ALL_INTERFACES ; do
run_iptables -A FORWARD -i $interface -j $(forward_chain $interface)
run_iptables -A INPUT -i $interface -j $(input_chain $interface)
addnatjump POSTROUTING $(masq_chain $interface) -o $interface
done
chain=${FW}2${FW}
if havechain $chain; then
#
# There is a fw->fw chain. Send loopback output through that chain
#
run_iptables -A OUTPUT -o lo -j $chain
#
# And delete the unconditional ACCEPT rule
#
run_iptables -D OUTPUT -o lo -j ACCEPT
fi
complete_standard_chain INPUT all $FW
complete_standard_chain OUTPUT $FW all
complete_standard_chain FORWARD all all
#
# Remove rules added to keep the firewall alive during [re]start"
#
disable_critical_hosts
for chain in INPUT OUTPUT FORWARD; do
[ -n "$FASTACCEPT" ] || run_iptables -D $chain -m state --state ESTABLISHED,RELATED -j ACCEPT
run_iptables -D $chain -p udp --dport 53 -j ACCEPT
done
process_routestopped -D
if [ -n "$LOGALLNEW" ]; then
for table in mangle nat filter; do
case $table in
mangle)
chains="PREROUTING INPUT FORWARD POSTROUTING"
;;
nat)
chains="PREROUTING POSTROUTING OUTPUT"
;;
*)
chains="INPUT FORWARD OUTPUT"
;;
esac
for chain in $chains; do
log_rule_limit $LOGALLNEW $chain $table $chain "" "" -I -m state --state NEW -t $table
done
done
fi
}
#
# Compile a script that will stop the firewall
#
# This function is called by compile_firewall() so all of the overloaded functions
# from that script are available here
#
compile_stop_firewall() {
local IPTABLES_COMMAND="\$IPTABLES"
local INDENT=" "
cat >&3 << __EOF__
#
# Stop/restore the firewall after an error or because of a "stop" or "clear" command
#
stop_firewall() {
deletechain() {
qt \$IPTABLES -L \$1 -n && qt \$IPTABLES -F \$1 && qt \$IPTABLES -X \$1
}
deleteallchains() {
\$IPTABLES -F
\$IPTABLES -X
}
setcontinue() {
\$IPTABLES -A \$1 -m state --state ESTABLISHED,RELATED -j ACCEPT
}
delete_nat() {
\$IPTABLES -t nat -F
\$IPTABLES -t nat -X
if [ -f \${VARDIR}/nat ]; then
while read external interface; do
del_ip_addr \$external \$interface
done < \${VARDIR}/nat
rm -f \${VARDIR}/nat
fi
}
case \$COMMAND in
stop|clear)
;;
*)
set +x
RESTOREPATH=\${VARDIR}/\$RESTOREFILE
if [ -x \$RESTOREPATH ]; then
if [ -x \${RESTOREPATH}-ipsets ]; then
progress_message2 Restoring Ipsets...
#
# We must purge iptables to be sure that there are no
# references to ipsets
#
for table in mangle nat filter; do
\$IPTABLES -t \$table -F
\$IPTABLES -t \$table -X
done
\${RESTOREPATH}-ipsets
fi
echo Restoring \${PRODUCT:=Shorewall}...
if \$RESTOREPATH restore; then
echo "\$PRODUCT restored from \$RESTOREPATH"
set_state "Started"
else
set_state "Unknown"
fi
kill \$\$
exit 2
fi
;;
esac
set_state "Stopping"
STOPPING="Yes"
TERMINATOR=
deletechain shorewall
determine_capabilities
__EOF__
append_file stop
cat >&3 << __EOF__
if [ -n "\$MANGLE_ENABLED" ]; then
run_iptables -t mangle -F
run_iptables -t mangle -X
for chain in PREROUTING INPUT FORWARD POSTROUTING; do
qt \$IPTABLES -t mangle -P \$chain ACCEPT
done
fi
if [ -n "\$RAW_TABLE" ]; then
run_iptables -t raw -F
run_iptables -t raw -X
for chain in PREROUTING OUTPUT; do
qt \$IPTABLES -t raw -P \$chain ACCEPT
done
fi
if [ -n "\$NAT_ENABLED" ]; then
delete_nat
for chain in PREROUTING POSTROUTING OUTPUT; do
qt \$IPTABLES -t nat -P \$chain ACCEPT
done
fi
if [ -f \${VARDIR}/proxyarp ]; then
while read address interface external haveroute; do
qt arp -i \$external -d \$address pub
[ -z "\${haveroute}\${NOROUTES}" ] && qt ip route del \$address dev \$interface
done < \${VARDIR}/proxyarp
rm -f \${VARDIR}/proxyarp
fi
for f in /proc/sys/net/ipv4/conf/*; do
[ -f \$f/proxy_arp ] && echo 0 > \$f/proxy_arp
done
__EOF__
[ -n "$CLEAR_TC" ] && save_command "delete_tc1"
[ -n "$DISABLE_IPV6" ] && save_command "disable_ipv6"
process_criticalhosts
if [ -n "$CRITICALHOSTS" ]; then
if [ -z "$ADMINISABSENTMINDED" ]; then
cat >&3 << __EOF__
for chain in INPUT OUTPUT; do
setpolicy \$chain ACCEPT
done
setpolicy FORWARD DROP
deleteallchains
for host in $CRITICALHOSTS; do
interface=\${host%:*}
networks=\${host#*:}
\$IPTABLES -A INPUT -i \$interface \$(source_ip_range \$networks) -j ACCEPT
\$IPTABLES -A OUTPUT -o \$interface \$(dest_ip_range \$networks) -j ACCEPT
done
for chain in INPUT OUTPUT; do
setpolicy $\chain DROP
done
__EOF__
else
cat >&3 << __EOF__
for chain in INPUT OUTPUT; do
setpolicy \$chain ACCEPT
done
setpolicy FORWARD DROP
deleteallchains
for host in $CRITICALHOSTS; do
interface=\${host%:*}
networks=\${host#*:}
\$IPTABLES -A INPUT -i \$interface \$(source_ip_range \$networks) -j ACCEPT
\$IPTABLES -A OUTPUT -o \$interface \$(dest_ip_range \$networks) -j ACCEPT
done
setpolicy INPUT DROP
for chain in INPUT FORWARD; do
setcontinue \$chain
done
__EOF__
fi
elif [ -z "$ADMINISABSENTMINDED" ]; then
cat >&3 << __EOF__
for chain in INPUT OUTPUT FORWARD; do
setpolicy \$chain DROP
done
deleteallchains
__EOF__
else
cat >&3 << __EOF__
for chain in INPUT FORWARD; do
setpolicy \$chain DROP
done
setpolicy OUTPUT ACCEPT
deleteallchains
for chain in INPUT FORWARD; do
setcontinue \$chain
done
__EOF__
fi
process_routestopped -A
save_command "\$IPTABLES -A INPUT -i lo -j ACCEPT"
[ -z "$ADMINISABSENTMINDED" ] && \
save_command "\$IPTABLES -A OUTPUT -o lo -j ACCEPT"
for interface in $(find_interfaces_by_option dhcp); do
save_command "\$IPTABLES -A INPUT -p udp -i $interface --dport 67:68 -j ACCEPT"
[ -z "$ADMINISABSENTMINDED" ] && \
save_command "\$IPTABLES -A OUTPUT -p udp -o $interface --dport 67:68 -j ACCEPT"
#
# This might be a bridge
#
save_command "\$IPTABLES -A FORWARD -p udp -i $interface -o $interface --dport 67:68 -j ACCEPT"
done
save_command
case "$IP_FORWARDING" in
[Oo][Nn])
save_command "echo 1 > /proc/sys/net/ipv4/ip_forward"
save_command "progress_message2 IP Forwarding Enabled"
;;
[Oo][Ff][Ff])
save_command "echo 0 > /proc/sys/net/ipv4/ip_forward"
save_command "progress_message2 IP Forwarding Disabled!"
;;
esac
append_file stopped
cat >&3 << __EOF__
set_state "Stopped"
logger "Shorewall Stopped"
case \$COMMAND in
stop|clear)
;;
*)
#
# The firewall is being stopped when we were trying to do something
# else. Remove the lock file and Kill the shell in case we're in a
# subshell
#
kill \$\$
;;
esac
}
__EOF__
}
#
# Conditionally add an option to .conf file (FD 3)
#
conditionally_add_option() { # $1 = option name
local value
eval value=\"\$$1\"
if [ -n "$value" ]; then
cat >&3 << __EOF__
[ -n "\${$1:=$value}" ]
__EOF__
fi
}
#
# Compile a Restore Script
#
compile_firewall() # $1 = File Name
{
local IPTABLES_COMMAND=run_iptables
local INDENT=""
local checking=
outfile=$1 dir=
#
# Overload a function from the library
#
deletechain() # $1 = name of chain
{
save_command "qt \$IPTABLES -L $1 -n && qt \$IPTABLES -F $1 && qt \$IPTABLES -X $1"
}
#
# END OVERLOADED FUNCTIONS
#
#
# So that mktempdir doesn't have to jump through hoops when there isn't a working 'mktemp',
# we create the compiler's temporary directory in TMP_DIR
#
STATEDIR=$TMP_DIR/compiler_state/
mkdir $STATEDIR || fatal_error "Cannot create temporary directory in $TMP_DIR"
if [ $COMMAND = compile ]; then
dir=$(dirname $1)
[ -d $dir ] || fatal_error "Directory $dir does not exist"
[ -h $dir ] && fatal_error "$dir is a Symbolic Link"
[ -d $outfile ] && fatal_error "$outfile is a Directory"
[ -h $outfile ] && fatal_error "$outfile is a Symbolic Link"
[ -f $outfile -a ! -x $outfile ] && fatal_error "$outfile exists and is not a restore file"
DOING=Compiling
DONE=compiled
OUTPUT=$(mktempfile $STATEDIR)
[ -n "$OUTPUT" ] || fatal_error "Cannot create temporary file in /tmp"
exec 3>>$OUTPUT
else
DOING=Checking
DONE=checked
checking=Yes
COMMAND=compile
exec 3>/dev/null
fi
cat >&3 << __EOF__
#
# Compiled firewall script generated by Shorewall $VERSION - $(date)"
#
__EOF__
if [ -n "$EXPORT" ]; then
cat >&3 << __EOF__
SHAREDIR=/usr/share/shorewall-lite
CONFDIR=/etc/shorewall-lite
VARDIR=/var/lib/shorewall-lite
__EOF__
else
cat >&3 << __EOF__
SHAREDIR=/usr/share/shorewall
CONFDIR=/etc/shorewall
VARDIR=/var/lib/shorewall
__EOF__
fi
cat >&3 << __EOF__
. \${SHAREDIR}/functions
__EOF__
compile_stop_firewall
cat >&3 << __EOF__
#
# Set policy of chain \$1 to \$2
#
setpolicy() {
\$IPTABLES -P \$1 \$2
}
#
# Remove all Shorewall-added rules
#
clear_firewall() {
stop_firewall
setpolicy INPUT ACCEPT
setpolicy FORWARD ACCEPT
setpolicy OUTPUT ACCEPT
run_iptables -F
echo 1 > /proc/sys/net/ipv4/ip_forward
__EOF__
if [ -n "$DISABLE_IPV6" ]; then
cat >&3 << __EOF__
if qt mywhich ip6tables; then
ip6tables -P INPUT ACCEPT 2> /dev/null
ip6tables -P OUTPUT ACCEPT 2> /dev/null
ip6tables -P FORWARD ACCEPT 2> /dev/null
fi
__EOF__
fi
append_file clear
cat >&3 << __EOF__
set_state "Cleared"
logger "Shorewall Cleared"
}
#
# Issue a message and stop/restore the firewall
#
fatal_error()
{
echo " ERROR: \$@" >&2
stop_firewall
exit 2
}
#
# Issue a message and stop
#
startup_error() # \$* = Error Message
{
echo " ERROR: \$@" >&2
kill \$\$
exit 2
}
#
# Run iptables and if an error occurs, stop/restore the firewall
#
run_iptables()
{
if ! \$IPTABLES \$@; then
error_message "ERROR: Command \"\$IPTABLES \$@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run iptables and if an error occurs, stop/restore the firewall
#
run_ip()
{
if ! ip \$@; then
error_message "ERROR: Command \"ip \$@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run tc and if an error occurs, stop/restore the firewall
#
run_tc() {
if ! tc \$@ ; then
error_message "ERROR: Command \"tc \$@\" Failed"
stop_firewall
exit 2
fi
}
#
# Functions to appease unconverted extension scripts
#
save_command()
{
return 0
}
run_and_save_command() {
eval \$@
}
ensure_and_save_command() {
eval \$@ || fatal_error "Command \"\$@\" failed"
}
__EOF__
#
# The following function(s) can be removed when we require version 30192 (below)
#
cat >&3 << __EOF__
#
# Undo the effect of 'separate_list()'
#
combine_list()
{
local f o=
for f in \$* ; do
o="\${o:+\$o,}\$f"
done
echo \$o
}
#
# Initialize environment
#
initialize() {
__EOF__
INDENT=" "
if [ -n "$EXPORT" ]; then
cat >&3 << __EOF__
if [ ! -f \${SHAREDIR}/version ]; then
fatal_error "This script requires Shorewall Lite which do not appear to be installed on this system"
fi
local version=\$(cat \${SHAREDIR}/version)
if [ \${LIBVERSION:-0} -lt 30191 ]; then
fatal_error "This script requires Shorewall Lite version 3.2.0-RC2 or later; current version is \$version"
fi
#
# These variables are required by the library functions called in this script
#
CONFIG_PATH="/etc/shorewall-lite:/usr/share/shorewall-lite"
__EOF__
else
cat >&3 << __EOF__
if [ ! -f \${SHAREDIR}/version ]; then
fatal_error "This script requires Shorewall which do not appear to be installed on this system (did you forget "-e" when you compiled?)"
fi
local version=\$(cat \${SHAREDIR}/version)
if [ \${LIBVERSION:-0} -lt 30191 ]; then
fatal_error "This script requires Shorewall version 3.2.0-Beta7 or later; current version is \$version"
fi
#
# These variables are required by the library functions called in this script
#
CONFIG_PATH="$CONFIG_PATH"
__EOF__
fi
cat >&3 << __EOF__
[ -n "\${COMMAND:=restart}" ]
[ -n "\${VERBOSE:=0}" ]
[ -n "\${RESTOREFILE:=$RESTOREFILE}" ]
MODULESDIR="$MODULESDIR"
MODULE_SUFFIX="$MODULE_SUFFIX"
LOGLIMIT="$LOGLIMIT"
LOGTAGONLY="$LOGTAGONLY"
LOGRULENUMBERS="$LOGRULENUMBERS"
__EOF__
if [ -n "$LOGFORMAT" ]; then
cat >&3 << __EOF__
LOGFORMAT="$LOGFORMAT"
__EOF__
else
cat >&3 << __EOF__
[ -n "\$LOGFORMAT\" ] || LOGFORMAT="Shorewall:%s:%s:"
__EOF__
fi
cat >&3 << __EOF__
VERSION="$VERSION"
SUBSYSLOCK="$SUBSYSLOCK"
PATH="$PATH"
TERMINATOR=fatal_error
__EOF__
if [ -n "$IPTABLES" ]; then
cat >&3 << __EOF__
IPTABLES="$IPTABLES"
[ -e "$IPTABLES" ] || startup_error "IPTABLES=$IPTABLES does not exist or is not executable"
__EOF__
else
cat >&3 << __EOF__
[ -z "\$IPTABLES" ] && IPTABLES=\$(mywhich iptables 2> /dev/null)
[ -n "\$IPTABLES" -a -e "\$IPTABLES" ] || startup_error "Can't find iptables executable"
__EOF__
fi
append_file params
cat >&3 << __EOF__
STOPPING=
#
# The library requires that ${VARDIR} exist
#
[ -d \${VARDIR} ] || mkdir -p \${VARDIR}
}
#
# Start/Restart/Reload the firewall
#
define_firewall() {
local restore_file=\$1
__EOF__
INDENT=" "
cat >&3 << __EOF__
load_kernel_modules
__EOF__
progress_message2 "Initializing..."
save_progress_message "Initializing..."
initialize_netfilter
progress_message2 "$DOING Proxy ARP"; setup_proxy_arp
#
# [re]-Establish routing
#
setup_providers $(find_file providers)
[ -n "$ROUTEMARK_INTERFACES" ] && setup_routes
progress_message2 "$DOING NAT..."; setup_nat
progress_message2 "$DOING NETMAP..."; setup_netmap
progress_message2 "$DOING Common Rules"; add_common_rules
save_progress_message "Setting up SYN Flood Protection..."
setup_syn_flood_chains
save_progress_message "Setting up IPSEC management..."
setup_ipsec
maclist_hosts=$(find_hosts_by_option maclist)
if [ -n "$maclist_hosts" ]; then
save_progress_message "Setting up MAC Filtration..."
setup_mac_lists
fi
progress_message2 "$DOING $(find_file rules)..."
save_progress_message "Setting up Rules..."
process_rules
tunnels=$(find_file tunnels)
if [ -f $tunnels ]; then
progress_message2 "$DOING $tunnels..."
save_progress_message "Setting up Tunnels..."
setup_tunnels $tunnels
fi
save_progress_message "Setting up Actions..."
progress_message2 "$DOING Actions..."; process_actions2
process_actions3
save_progress_message "Applying Policies..."
progress_message2 "$DOING $(find_file policy)..."; apply_policy_rules
masq=$(find_file masq)
if [ -f $masq ]; then
setup_masq $masq
fi
if [ -n "$MANGLE_ENABLED" ]; then
tos=$(find_file tos)
if [ -f $tos ]; then
save_progress_message "Setting up TOS..."
process_tos $tos
fi
ecn=$(find_file ecn)
if [ -f $ecn ]; then
save_progress_message "Setting up ECN..."
setup_ecn $ecn
fi
save_progress_message "Setting up TC Rules..."
setup_tc
fi
progress_message2 "$DOING Rule Activation..."
save_progress_message "Activating Rules..."
activate_rules
if [ -n "$ALIASES_TO_ADD" ]; then
save_command add_ip_aliases $ALIASES_TO_ADD
fi
for file in chains nat proxyarp zones; do
save_command "cat > \${VARDIR}/$file $LEFTSHIFT __EOF__"
cat $STATEDIR/$file >&3
save_command_unindented __EOF__
done
cat >&3 << __EOF__
if [ \$COMMAND = restore ]; then
iptables-restore < \$restore_file
fi
__EOF__
save_command "date > \${VARDIR}/restarted"
append_file start
[ -n "$DELAYBLACKLISTLOAD" ] && refresh_blacklist
createchain shorewall no
save_command set_state "Started"
append_file started
cat >&3 << __EOF__
cp -f \$(my_pathname) \${VARDIR}/.restore
case \$COMMAND in
start)
logger "Shorewall started"
;;
restart)
logger "Shorewall restarted"
;;
restore)
logger "Shorewall restored"
;;
esac
}
#
# Silently define Firewall and ignore errors
#
restore_firewall()
{
iptables_save_file=\${VARDIR}/\$(basename \$0)-iptables
fatal_error()
{
echo " ERROR: \$@" >&2
}
startup_error() # \$@ = Error Message
{
echo " ERROR: \$@" >&2
}
run_iptables() { return 0; }
VERBOSE=-1 # The progress messages don't make sense without iptables
IPTABLES=run_iptables
if [ -f \$iptables_save_file ]; then
{
define_firewall \$iptables_save_file
}
else
fatal_error "\$iptables_save_file does not exist"
exit 2
fi
}
__EOF__
exec 3>&-
if [ -n "$checking" ]; then
progress_message3 "Shorewall configuration verified"
else
INDENT=
cat $(find_file prog.header) $OUTPUT $(find_file prog.footer) > $outfile
chmod 700 $outfile
if [ -n "$EXPORT" ]; then
exec 3>${outfile}.conf
cat >&3 << __EOF__
#
# Shorewall auxiliary configuration file created by Shorewall version $VERSION - $(date)
#
__EOF__
for option in VERBOSITY LOGFILE LOGFORMAT IPTABLES PATH SHOREWALL_SHELL SUBSYSLOCK RESTOREFILE; do
conditionally_add_option $option
done
exec 3>&-
fi
progress_message3 "Shorewall configuration compiled to $(resolve_file $outfile)"
rm -f $OUTPUT
fi
rm -rf $TMP_DIR
}
#
# Determine the value for a parameter that defaults to Yes
#
added_param_value_yes() # $1 = Parameter Name, $2 = Parameter value
{
local val="$2"
if [ -z "$val" ]; then
echo "Yes"
else case $val in
[Yy][Ee][Ss])
echo "Yes"
;;
[Nn][Oo])
echo ""
;;
*)
fatal_error "Invalid value ($val) for $1"
;;
esac
fi
}
#
# Determine the value for a parameter that defaults to No
#
added_param_value_no() # $1 = Parameter Name, $2 = Parameter value
{
local val="$2"
if [ -z "$val" ]; then
echo ""
else case $val in
[Yy][Ee][Ss])
echo "Yes"
;;
[Nn][Oo])
echo ""
;;
*)
fatal_error "Invalid value ($val) for $1"
;;
esac
fi
}
#
# Initialize this program
#
do_initialize() {
# Run all utility programs using the C locale
#
# Thanks to Vincent Planchenault for this tip #
export LC_ALL=C
# Make sure umask is sane
umask 077
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
#
# Establish termination function
#
TERMINATOR=fatal_error
#
# Clear all configuration variables
#
VERSION=
IPTABLES=
FW=
SUBSYSLOCK=
ALLOWRELATED=Yes
LOGRATE=
LOGBURST=
LOGPARMS=
LOGLIMIT=
ADD_IP_ALIASES=
ADD_SNAT_ALIASES=
TC_ENABLED=
BLACKLIST_DISPOSITION=
BLACKLIST_LOGLEVEL=
CLAMPMSS=
ROUTE_FILTER=
LOG_MARTIANS=
DETECT_DNAT_IPADDRS=
MUTEX_TIMEOUT=
FORWARDPING=
MACLIST_DISPOSITION=
MACLIST_LOG_LEVEL=
TCP_FLAGS_DISPOSITION=
TCP_FLAGS_LOG_LEVEL=
RFC1918_LOG_LEVEL=
MARK_IN_FORWARD_CHAIN=
FUNCTIONS=
VERSION_FILE=
LOGFORMAT=
LOGRULENUMBERS=
ADMINISABSENTMINDED=
BLACKLISTNEWONLY=
MODULE_SUFFIX=
ACTIONS=
USEDACTIONS=
SMURF_LOG_LEVEL=
DISABLE_IPV6=
BRIDGING=
PKTTYPE=
USEPKTYPE=
RETAIN_ALIASES=
DELAYBLACKLISTLOAD=
LOGTAGONLY=
LOGALLNEW=
RFC1918_STRICT=
MACLIST_TTL=
SAVE_IPSETS=
RESTOREFILE=
MAPOLDACTIONS=
IMPLICIT_CONTINUE=
HIGH_ROUTE_MARKS=
TC_EXPERT=
OUTPUT=
TMP_DIR=
ALL_INTERFACES=
ROUTEMARK_INTERFACES=
IPSECMARK=256
PROVIDERS=
CRITICALHOSTS=
IPSECFILE=
EXCLUSION_SEQ=1
STOPPING=
HAVE_MUTEX=
ALIASES_TO_ADD=
SECTION=ESTABLISHED
SECTIONS=
ALL_PORTS=
SHAREDIR=/usr/share/shorewall
VARDIR=/var/lib/shorewall
[ -z "$EXPORT" ] && CONFDIR=/etc/shorewall || CONFDIR=${SHAREDIR}/configfiles
FUNCTIONS=${SHAREDIR}/functions
[ -n "${VERBOSE:=2}" ]
if [ -f $FUNCTIONS ]; then
[ $VERBOSE -ge 2 ] && echo "Loading $FUNCTIONS..."
. $FUNCTIONS
else
fatal_error "$FUNCTIONS does not exist!"
fi
TMP_DIR=$(mktempdir)
[ -n "$TMP_DIR" ] && chmod 700 $TMP_DIR || \
fatal_error "Can't create a temporary directory"
trap "[ -n "$OUTPUT" ] && rm -f $OUTPUT;rm -rf $TMP_DIR; exit 2" 1 2 3 4 5 6 9
ensure_config_path
VERSION_FILE=$SHAREDIR/version
[ -f $VERSION_FILE ] && VERSION=$(cat $VERSION_FILE)
run_user_exit params
config=$(find_file shorewall.conf)
if [ -f $config ]; then
if [ -r $config ]; then
progress_message "Processing $config..."
. $config
else
fatal_error "Cannot read $config (Hint: Are you root?)"
fi
else
fatal_error "$config does not exist!"
fi
#
# Restore CONFIG_PATH if the shorewall.conf file cleared it
#
ensure_config_path
#
# Determine the capabilities of the installed iptables/netfilter
# We load the kernel modules here to accurately determine
# capabilities when module autoloading isn't enabled.
#
PKTTYPE=$(added_param_value_no PKTTYPE $PKTTYPE)
[ -n "${MODULE_SUFFIX:=o gz ko o.gz ko.gz}" ]
if [ -z "$EXPORT" -a "$(whoami)" = root ]; then
load_kernel_modules
if [ -z "$IPTABLES" ]; then
IPTABLES=$(mywhich iptables 2> /dev/null)
[ -z "$IPTABLES" ] && fatal_error "Can't find iptables executable"
else
[ -e "$IPTABLES" ] || fatal_error "\$IPTABLES=$IPTABLES does not exist or is not executable"
fi
determine_capabilities
else
f=$(find_file capabilities)
[ -f $f ] && . $f || fatal_error "The -e flag requires a capabilities file"
fi
ALLOWRELATED="$(added_param_value_yes ALLOWRELATED $ALLOWRELATED)"
[ -n "$ALLOWRELATED" ] || \
fatal_error "ALLOWRELATED=No is not supported"
ADD_IP_ALIASES="$(added_param_value_yes ADD_IP_ALIASES $ADD_IP_ALIASES)"
if [ -n "${LOGRATE}${LOGBURST}" ]; then
LOGLIMIT="--match limit"
[ -n "$LOGRATE" ] && LOGLIMIT="$LOGLIMIT --limit $LOGRATE"
[ -n "$LOGBURST" ] && LOGLIMIT="$LOGLIMIT --limit-burst $LOGBURST"
fi
if [ -n "$IP_FORWARDING" ]; then
case "$IP_FORWARDING" in
[Oo][Nn]|[Oo][Ff][Ff]|[Kk][Ee][Ee][Pp])
;;
*)
fatal_error "Invalid value ($IP_FORWARDING) for IP_FORWARDING"
;;
esac
else
IP_FORWARDING=On
fi
[ -n "${BLACKLIST_DISPOSITION:=DROP}" ]
case "$CLAMPMSS" in
[0-9]*)
;;
*)
CLAMPMSS=$(added_param_value_no CLAMPMSS $CLAMPMSS)
;;
esac
ADD_SNAT_ALIASES=$(added_param_value_no ADD_SNAT_ALIASES $ADD_SNAT_ALIASES)
ROUTE_FILTER=$(added_param_value_no ROUTE_FILTER $ROUTE_FILTER)
LOG_MARTIANS=$(added_param_value_no LOG_MARTIANS $LOG_MARTIANS)
DETECT_DNAT_IPADDRS=$(added_param_value_no DETECT_DNAT_IPADDRS $DETECT_DNAT_IPADDRS)
FORWARDPING=$(added_param_value_no FORWARDPING $FORWARDPING)
[ -n "$FORWARDPING" ] && \
fatal_error "FORWARDPING=Yes is no longer supported"
maclist_target=reject
if [ -n "$MACLIST_DISPOSITION" ] ; then
case $MACLIST_DISPOSITION in
REJECT)
;;
DROP)
maclist_target=DROP
;;
ACCEPT)
maclist_target=RETURN
;;
*)
fatal_error "Invalid value ($MACLIST_DISPOSITION) for MACLIST_DISPOSITION"
;;
esac
else
MACLIST_DISPOSITION=REJECT
fi
if [ -n "$TCP_FLAGS_DISPOSITION" ] ; then
case $TCP_FLAGS_DISPOSITION in
REJECT|ACCEPT|DROP)
;;
*)
fatal_error "Invalid value ($TCP_FLAGS_DISPOSITION) for TCP_FLAGS_DISPOSITION"
;;
esac
else
TCP_FLAGS_DISPOSITION=DROP
fi
[ -n "${RFC1918_LOG_LEVEL:=info}" ]
MARK_IN_FORWARD_CHAIN=$(added_param_value_no MARK_IN_FORWARD_CHAIN $MARK_IN_FORWARD_CHAIN)
[ -n "$MARK_IN_FORWARD_CHAIN" ] && MARKING_CHAIN=tcfor || MARKING_CHAIN=tcpre
CLEAR_TC=$(added_param_value_yes CLEAR_TC $CLEAR_TC)
if [ -n "$LOGFORMAT" ]; then
if [ -n "$(echo $LOGFORMAT | grep '%d')" ]; then
LOGRULENUMBERS=Yes
temp=$(printf "$LOGFORMAT" fooxx 1 barxx 2> /dev/null)
if [ $? -ne 0 ]; then
fatal_error "Invalid LOGFORMAT string: \"$LOGFORMAT\""
fi
else
temp=$(printf "$LOGFORMAT" fooxx barxx 2> /dev/null)
if [ $? -ne 0 ]; then
fatal_error "Invalid LOGFORMAT string: \"$LOGFORMAT\""
fi
fi
[ ${#temp} -le 29 ] || fatal_error "LOGFORMAT string is longer than 29 characters: \"$LOGFORMAT\""
else
LOGFORMAT="Shorewall:%s:%s:"
fi
ADMINISABSENTMINDED=$(added_param_value_no ADMINISABSENTMINDED $ADMINISABSENTMINDED)
BLACKLISTNEWONLY=$(added_param_value_no BLACKLISTNEWONLY $BLACKLISTNEWONLY)
DISABLE_IPV6=$(added_param_value_no DISABLE_IPV6 $DISABLE_IPV6)
BRIDGING=$(added_param_value_no BRIDGING $BRIDGING)
STARTUP_ENABLED=$(added_param_value_yes STARTUP_ENABLED $STARTUP_ENABLED)
RETAIN_ALIASES=$(added_param_value_no RETAIN_ALIASES $RETAIN_ALIASES)
[ -n "${ADD_IP_ALIASES}${ADD_SNAT_ALIASES}" ] || RETAIN_ALIASES=
DELAYBLACKLISTLOAD=$(added_param_value_no DELAYBLACKLISTLOAD $DELAYBLACKLISTLOAD)
LOGTAGONLY=$(added_param_value_no LOGTAGONLY $LOGTAGONLY)
RFC1918_STRICT=$(added_param_value_no RFC1918_STRICT $RFC1918_STRICT)
SAVE_IPSETS=$(added_param_value_no SAVE_IPSETS $SAVE_IPSETS)
MAPOLDACTIONS=$(added_param_value_yes MAPOLDACTIONS $MAPOLDACTIONS)
FASTACCEPT=$(added_param_value_no FASTACCEPT $FASTACCEPT)
IMPLICIT_CONTINUE=$(added_param_value_no IMPLICIT_CONTINUE $IMPLICIT_CONTINUE)
HIGH_ROUTE_MARKS=$(added_param_value_no HIGH_ROUTE_MARKS $HIGH_ROUTE_MARKS)
TC_EXPERT=$(added_param_value_no TC_EXPERT $TC_EXPERT)
[ -n "$XCONNMARK_MATCH" ] || XCONNMARK=
[ -n "$XMARK" ] || XCONNMARK=
[ -n "$HIGH_ROUTE_MARKS" -a -z "$XCONNMARK" ] && fatal_error "HIGH_ROUTE_MARKS=Yes requires extended CONNMARK target, extended CONNMARK match support and extended MARK support"
case ${IPSECFILE:=ipsec} in
ipsec|zones)
;;
*)
fatal_error "Invalid value ($IPSECFILE) for IPSECFILE option"
;;
esac
case ${MACLIST_TABLE:=filter} in
filter)
;;
mangle)
[ $MACLIST_DISPOSITION = reject ] && fatal_error "MACLIST_DISPOSITION=REJECT is not allowed with MACLIST_TABLE=mangle"
;; *)
fatal_error "Invalid value ($MACLIST_TABLE) for MACLIST_TABLE option"
;;
esac
TC_SCRIPT=
if [ -n "$TC_ENABLED" ] ; then
case "$TC_ENABLED" in
[Yy][Ee][Ss])
TC_ENABLED=
TC_SCRIPT=$(find_file tcstart)
[ -f $TC_SCRIPT ] || fatal_error "Unable to find tcstart file"
;;
[Ii][Nn][Tt][Ee][Rr][Nn][Aa][Ll])
TC_ENABLED=Yes
;;
[Nn][Oo])
TC_ENABLED=
;;
esac
else
TC_ENABLED=Yes
fi
if [ -n "$TC_ENABLED" ];then
[ -n "$MANGLE_ENABLED" ] || fatal_error "Traffic Shaping requires mangle support in your kernel and iptables"
fi
[ "x${SHOREWALL_DIR}" = "x." ] && SHOREWALL_DIR="$PWD"
[ -n "${RESTOREFILE:=restore}" ]
#
# Strip the files that we use often
#
strip_file interfaces
strip_file hosts
#
# Check out the user's shell
#
[ -n "${SHOREWALL_SHELL:=/bin/sh}" ]
temp=$(decodeaddr 192.168.1.1)
if [ $(encodeaddr $temp) != 192.168.1.1 ]; then
fatal_error "Shell $SHOREWALL_SHELL is broken and may not be used with Shorewall"
fi
if [ -z "$KLUDGEFREE" ]; then
rm -f $TMP_DIR/physdev
rm -f $TMP_DIR/iprange
fi
qt mywhich awk && HAVEAWK=Yes || HAVEAWK=
}
#
# Give Usage Information
#
usage() {
echo "Usage: $0 [debug] check|compile <filename>}"
exit 1
}
#
# E X E C U T I O N B E G I N S H E R E
#
#
# Start trace if first arg is "debug"
#
[ $# -gt 1 ] && [ "$1" = "debug" ] && { set -x ; shift ; }
NOLOCK=
[ $# -gt 1 ] && [ "$1" = "nolock" ] && { NOLOCK=Yes; shift ; }
trap "exit 2" 1 2 3 4 5 6 9
COMMAND="$1"
case "$COMMAND" in
check)
[ $# -ne 1 ] && usage
do_initialize
compile_firewall
;;
compile)
[ $# -ne 2 ] && usage
do_initialize
compile_firewall $2
;;
call)
#
# Undocumented way to call functions in ${SHAREDIR}/compiler directly
#
shift
do_initialize
EMPTY=
$@
;;
*)
usage
;;
esac