shorewall_code/Shorewall6/manpages/shorewall6-tunnels.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall6-tunnels</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>tunnels</refname>

    <refpurpose>Shorewall6 VPN definition file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall6/tunnels</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The tunnels file is used to define rules for encapsulated (usually
    encrypted) traffic to pass between the Shorewall6 system and a remote
    gateway. Traffic flowing through the tunnel is handled using the normal
    zone/policy/rule mechanism. See <ulink
    url="http://www.shorewall.net/VPNBasics.html">http://www.shorewall.net/VPNBasics.html</ulink>
    for details.</para>

    <para>The columns in the file are as follows (where the column name is
    followed by a different name in parentheses, the different name is used in
    the alternate specification syntax).</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">TYPE</emphasis> - {<emphasis
        role="bold">ipsec</emphasis>[<emphasis
        role="bold">:{noah</emphasis>|ah}]|<emphasis
        role="bold">ipsecnat</emphasis>|<emphasis
        role="bold">gre</emphasis>|l2tp|<emphasis
        role="bold">pptpclient</emphasis>|<emphasis
        role="bold">pptpserver</emphasis>|{<emphasis
        role="bold">openvpn</emphasis>|<emphasis
        role="bold">openvpnclient</emphasis>|<emphasis
        role="bold">openvpnserver</emphasis>}[:{<emphasis
        role="bold">tcp</emphasis>|<emphasis
        role="bold">udp</emphasis>}]<emphasis
        role="bold">[</emphasis>:<emphasis>port</emphasis>]|<emphasis
        role="bold">generic</emphasis><emphasis
        role="bold">:</emphasis><emphasis>protocol</emphasis>[<emphasis
        role="bold">:</emphasis><emphasis>port</emphasis>]}</term>

        <listitem>
          <para>Types are as follows:</para>

          <programlisting>        <emphasis role="bold">ipsec</emphasis>         - IPv6 IPSEC
        <emphasis role="bold">ipsecnat</emphasis>      - IPv6 IPSEC with NAT Traversal (UDP port 4500 encapsulation)
        <emphasis role="bold">gre</emphasis>           - Generalized Routing Encapsulation (Protocol 47)
        <emphasis role="bold">l2tp</emphasis>          - Layer 2 Tunneling Protocol (UDP port 1701)
        <emphasis role="bold">openvpn</emphasis>       - OpenVPN in point-to-point mode
        <emphasis role="bold">openvpnclient</emphasis> - OpenVPN client runs on the firewall
        <emphasis role="bold">openvpnserver</emphasis> - OpenVPN server runs on the firewall
        <emphasis role="bold">generic</emphasis>       - Other tunnel type</programlisting>

          <para>If the type is <emphasis role="bold">ipsec</emphasis>, it may
          be followed by <emphasis role="bold">:ah</emphasis> to indicate that
          the Authentication Headers protocol (51) is used by the tunnel (the
          default is <option>:noah</option> which means that protocol 51 is
          not used). NAT traversal is only supported with ESP (protocol 50) so
          <emphasis role="bold">ipsecnat</emphasis> tunnels don't allow the
          <emphasis role="bold">ah</emphasis> option (<emphasis
          role="bold">ipsecnat:noah</emphasis> may be specified but is
          redundant).</para>

          <para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
          role="bold">openvpnclient</emphasis> or <emphasis
          role="bold">openvpnserver</emphasis> it may optionally be followed
          by ":" and <emphasis role="bold">tcp</emphasis> or <emphasis
          role="bold">udp</emphasis> to specify the protocol to be used. If
          not specified, <emphasis role="bold">udp</emphasis> is assumed.
          Note: At this writing, OpenVPN does not support IPv6.</para>

          <para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
          role="bold">openvpnclient</emphasis> or <emphasis
          role="bold">openvpnserver</emphasis> it may optionally be followed
          by ":" and the port number used by the tunnel. if no ":" and port
          number are included, then the default port of 1194 will be used. .
          Where both the protocol and port are specified, the protocol must be
          given first (e.g., openvpn:tcp:4444).</para>

          <para>If type is <emphasis role="bold">generic</emphasis>, it must
          be followed by ":" and a protocol name (from /etc/protocols) or a
          protocol number. If the protocol is <emphasis
          role="bold">tcp</emphasis> or <emphasis role="bold">udp</emphasis>
          (6 or 17), then it may optionally be followed by ":" and a port
          number.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term/>

        <listitem>
          <para/>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ZONE</emphasis> -
        <emphasis>zone</emphasis></term>

        <listitem>
          <para>The <emphasis>zone</emphasis> of the physical interface
          through which tunnel traffic passes. This is normally your internet
          zone.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">GATEWAY</emphasis>S -
        <emphasis>address-or-range</emphasis> <emphasis role="bold">[ , ...
        ]</emphasis></term>

        <listitem>
          <para>The IP address of the remote tunnel gateway. If the remote
          gateway has no fixed address (Road Warrior) then specify the gateway
          as <emphasis role="bold">::/0</emphasis>. May be specified as a
          network address and if your kernel and ip6tables include iprange
          match support then IP address ranges are also allowed.</para>

          <para>Beginning with Shorewall 4.5.3, a list of addresses or ranges
          may be given. Exclusion (<ulink
          url="shorewall6-exclusion.html">shorewall6-exclusion</ulink> (5) )
          is not supported.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">GATEWAY ZONES</emphasis> (gateway_zone) -
        [<emphasis>zone</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>zone</emphasis>]...]</term>

        <listitem>
          <para>Optional. If the gateway system specified in the third column
          is a standalone host then this column should contain a
          comma-separated list of the names of the zones that the host might
          be in. This column only applies to IPSEC tunnels where it enables
          ISAKMP traffic to flow through the tunnel to the remote
          gateway(s).</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Example</title>

    <variablelist>
      <varlistentry>
        <term>Example 1:</term>

        <listitem>
          <para>IPSec tunnel.</para>

          <para>The remote gateway is 2001:cec792b4:1::44. The tunnel does not
          use the AH protocol</para>

          <programlisting>        #TYPE           ZONE    GATEWAY
        ipsec:noah      net     2002:cec792b4:1::44</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 2:</term>

        <listitem>
          <para>Road Warrior (LapTop that may connect from anywhere) where the
          "gw" zone is used to represent the remote LapTop</para>

          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
        ipsec           net     ::/0                    gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 3:</term>

        <listitem>
          <para>Host 2001:cec792b4:1::44 is a standalone system connected via
          an ipsec tunnel to the firewall system. The host is in zone
          gw.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
        ipsec           net     2001:cec792b4:1::44     gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 4:</term>

        <listitem>
          <para>OPENVPN tunnel. The remote gateway is 2001:cec792b4:1::44 and
          openvpn uses port 7777.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
        openvpn:7777    net     2001:cec792b4:1::44</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 8:</term>

        <listitem>
          <para>You have a tunnel that is not one of the supported types. Your
          tunnel uses UDP port 4444. The other end of the tunnel is
          2001:cec792b4:1::44.</para>

          <programlisting>        #TYPE            ZONE    GATEWAY                GATEWAY ZONES
        generic:udp:4444 net     2001:cec792b4:1::44</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall6/tunnels</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://shorewall.net/configuration_file_basics.htm#Pairs">http://shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>

    <para>shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5),
    shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5),
    shorewall6-maclist(5), shoewall6-netmap(5),shorewall6-params(5),
    shorewall6-policy(5), shorewall6-providers(5), shorewall6-rtrules(5),
    shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5),
    shorewall6-secmarks(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5),
    shorewall6-tcrules(5), shorewall6-tos(5), shorewall6-zones(5)</para>
  </refsect1>
</refentry>