2004-02-14 19:06:39 +01:00
<?xml version="1.0" encoding="UTF-8"?>
< !DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article >
<!-- $Id$ -->
<articleinfo >
<title > Shorewall FAQs</title>
<authorgroup >
<corpauthor > Shorewall Community</corpauthor>
<author >
<firstname > Tom</firstname>
<surname > Eastep</surname>
</author>
</authorgroup>
2005-03-01 21:20:26 +01:00
<pubdate > 2005-03-01</pubdate>
2004-02-14 19:06:39 +01:00
<copyright >
<year > 2001-2004</year>
<holder > Thomas M. Eastep</holder>
</copyright>
<legalnotice >
<para > Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
2004-08-17 00:17:09 +02:00
<quote > <ulink url= "GnuCopyright.htm" > GNU Free Documentation
License</ulink> </quote> .</para>
2004-02-14 19:06:39 +01:00
</legalnotice>
</articleinfo>
<section >
<title > Installing Shorewall</title>
<section >
<title > Where do I find Step by Step Installation and Configuration
Instructions?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> Check out the <ulink
url="shorewall_quickstart_guide.htm">QuickStart Guides</ulink> .</para>
</section>
2004-05-19 19:55:45 +02:00
<section id= "faq37" >
<title > (FAQ 37) I just installed Shorewall on Debian and the
/etc/shorewall directory is empty!!!</title>
2004-12-18 18:08:10 +01:00
<important >
<para > Once you have installed the .deb package and before you attempt
to configure Shorewall, please heed the advice of Lorenzo Martignoni,
the Shorewall Debian Maintainer:</para>
<para > <quote > For more information about Shorewall usage on Debian
system please look at /usr/share/doc/shorewall/README.Debian provided
by [the] shorewall Debian package.</quote> </para>
</important>
2004-05-19 19:55:45 +02:00
<para > If you install using the .deb, you will find that your <filename
class="directory">/etc/shorewall</filename> directory is empty. This is
intentional. The released configuration file skeletons may be found on
2004-08-17 00:17:09 +02:00
your system in the directory <filename
class="directory">/usr/share/doc/shorewall/default-config</filename> .
2004-05-19 19:55:45 +02:00
Simply copy the files you need from that directory to <filename
2004-08-17 00:17:09 +02:00
class="directory">/etc/shorewall</filename> and modify the
copies.</para>
2004-05-19 19:55:45 +02:00
2004-08-17 00:17:09 +02:00
<para > Note that you must copy <filename
class="directory">/usr/share/doc/shorewall/default-config/shorewall.conf</filename>
2004-06-19 18:05:50 +02:00
and <filename > /usr/share/doc/shorewall/default-config/modules</filename>
to <filename class= "directory" > /etc/shorewall</filename> even if you do
not modify those files.</para>
2004-05-19 19:55:45 +02:00
</section>
2004-12-31 19:19:12 +01:00
<section >
<title > (FAQ 44) I can't install the RPM — I keep getting the message
"error: failed dependencies:iproute is needed..."</title>
<para > <emphasis role= "bold" > Answer</emphasis> : Read the <ulink
url="Install.htm">Installation Instructions</ulink> !!!!!</para>
</section>
2004-02-14 19:06:39 +01:00
</section>
<section >
2004-08-07 04:13:32 +02:00
<title > Port Forwarding (Port Redirection)</title>
2004-02-14 19:06:39 +01:00
<section id= "faq1" >
<title > (FAQ 1) I want to forward UDP port 7777 to my my personal PC with
2004-08-17 00:17:09 +02:00
IP address 192.168.1.5. I've looked everywhere and can't find how to do
it.</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> The first example in the
<ulink url= "Documentation.htm#Rules" > rules file documentation</ulink>
shows how to do port forwarding under Shorewall. The format of a
port-forwarding rule to a local system is as follows:</para>
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT
2004-08-17 00:17:09 +02:00
DNAT net loc:< l<emphasis > ocal IP address</emphasis> > [:< <emphasis > local port</emphasis> > ] < <emphasis > protocol</emphasis> > < <emphasis > port #</emphasis> > </programlisting>
2004-02-14 19:06:39 +01:00
<para > So to forward UDP port 7777 to internal system 192.168.1.5, the
rule is:</para>
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT
DNAT net loc:192.168.1.5 udp 7777</programlisting>
<para > If you want to forward requests directed to a particular address (
2004-08-17 00:17:09 +02:00
<emphasis > < external IP> </emphasis> ) on your firewall to an
2004-02-14 19:06:39 +01:00
internal system:</para>
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT SOURCE ORIGINAL
# PORT DEST.
2004-08-17 00:17:09 +02:00
DNAT net loc:< l<emphasis > ocal IP address</emphasis> > [:< <emphasis > local port</emphasis> > ] < <emphasis > protocol</emphasis> > < <emphasis > port #</emphasis> > - < <emphasis > external IP</emphasis> > </programlisting>
2004-02-14 19:06:39 +01:00
2004-09-04 20:57:53 +02:00
<para > Finally, if you need to forward a range of ports, in the DEST PORT
2004-08-17 00:17:09 +02:00
column specify the range as
<emphasis > < low-port> :< high-port> </emphasis> .</para>
2004-02-14 19:06:39 +01:00
<section id= "faq1a" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 1a) Ok -- I followed those instructions but it doesn't
2004-02-14 19:06:39 +01:00
work</title>
<para > <emphasis role= "bold" > Answer:</emphasis> That is usually the
result of one of four things:</para>
<itemizedlist >
<listitem >
<para > You are trying to test from inside your firewall (no, that
2004-08-17 00:17:09 +02:00
won't work -- see <xref linkend= "faq2" /> ).</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
<para > You have a more basic problem with your local system (the
one that you are trying to forward to) such as an incorrect
default gateway (it should be set to the IP address of your
2004-08-17 00:17:09 +02:00
firewall's internal interface).</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
<para > Your ISP is blocking that particular port inbound.</para>
</listitem>
<listitem >
<para > You are running Mandrake Linux and have configured Internet
Connection Sharing. In that case, the name of your local zone is
2004-08-17 00:17:09 +02:00
'masq' rather than 'loc' (change all instances of 'loc' to 'masq'
in your rules). You may want to consider re-installing Shorewall
in a configuration which matches the Shorewall documentation. See
the <ulink url= "two-interface.htm" > two-interface QuickStart
Guide</ulink> for details.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</itemizedlist>
</section>
<section id= "faq1b" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 1b) I'm still having problems with port forwarding</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> To further diagnose
this problem:</para>
<itemizedlist >
<listitem >
2004-08-17 00:17:09 +02:00
<para > As root, type <quote > <command > iptables -t nat
-Z</command> </quote> . This clears the NetFilter counters in the
nat table.</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
2004-08-17 00:17:09 +02:00
<para > Try to connect to the redirected port from an external
host.</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
2004-08-17 00:17:09 +02:00
<para > As root type <quote > <command > shorewall show
nat</command> </quote> </para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
<para > Locate the appropriate DNAT rule. It will be in a chain
2004-08-17 00:17:09 +02:00
called <emphasis > < source zone> </emphasis> _dnat
(<quote > net_dnat</quote> in the above examples).</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
<para > Is the packet count in the first column non-zero? If so, the
connection request is reaching the firewall and is being
redirected to the server. In this case, the problem is usually a
missing or incorrect default gateway setting on the local system
(the system you are trying to forward to -- its default gateway
2004-08-17 00:17:09 +02:00
should be the IP address of the firewall's interface to that
2004-02-14 19:06:39 +01:00
system).</para>
</listitem>
<listitem >
<para > If the packet count is zero:</para>
<itemizedlist >
<listitem >
<para > the connection request is not reaching your server
(possibly it is being blocked by your ISP); or</para>
</listitem>
<listitem >
<para > you are trying to connect to a secondary IP address on
your firewall and your rule is only redirecting the primary IP
address (You need to specify the secondary IP address in the
2004-08-17 00:17:09 +02:00
<quote > ORIG. DEST.</quote> column in your DNAT rule);
or</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
2004-08-17 00:17:09 +02:00
<para > your DNAT rule doesn't match the connection request in
some other way. In that case, you may have to use a packet
2004-02-14 19:06:39 +01:00
sniffer such as tcpdump or ethereal to further diagnose the
problem.</para>
</listitem>
</itemizedlist>
</listitem>
</itemizedlist>
</section>
<section id= "faq1c" >
<title > (FAQ 1c) From the internet, I want to connect to port 1022 on
my firewall and have the firewall forward the connection to port 22 on
local system 192.168.1.3. How do I do that?</title>
<para > In /<filename > etc/shorewall/rules</filename> :</para>
2004-09-04 20:57:53 +02:00
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT
DNAT net loc:192.168.1.3:22 tcp 1022</programlisting>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section id= "faq30" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 30) I'm confused about when to use DNAT rules and when to
use ACCEPT rules.</title>
2004-02-14 19:06:39 +01:00
<para > It would be a good idea to review the <ulink
url="shorewall_quickstart_guide.htm">QuickStart Guide</ulink>
appropriate for your setup; the guides cover this topic in a tutorial
fashion. DNAT rules should be used for connections that need to go the
opposite direction from SNAT/MASQUERADE. So if you masquerade or use
SNAT from your local network to the internet then you will need to use
DNAT rules to allow connections from the internet to your local network.
In all other cases, you use ACCEPT unless you need to hijack connections
as they go through your firewall and handle them on the firewall box
itself; in that case, you use a REDIRECT rule.</para>
</section>
2004-07-15 00:06:35 +02:00
<section >
<title > (FAQ 38) Where can I find more information about DNAT?</title>
<para > Ian Allen has written a <ulink
2004-08-17 00:17:09 +02:00
url="http://ian.idallen.ca/dnat.txt">Paper about DNAT and
Linux</ulink> .</para>
2004-07-15 00:06:35 +02:00
</section>
2004-02-14 19:06:39 +01:00
</section>
<section >
<title > DNS and Port Forwarding/NAT</title>
<section id= "faq2" >
<title > (FAQ 2) I port forward www requests to www.mydomain.com (IP
130.151.100.69) to system 192.168.1.5 in my local network. External
clients can browse http://www.mydomain.com but internal clients
2004-08-17 00:17:09 +02:00
can't.</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> I have two objections to
this setup.</para>
<itemizedlist >
<listitem >
<para > Having an internet-accessible server in your local network is
like raising foxes in the corner of your hen house. If the server is
2004-08-17 00:17:09 +02:00
compromised, there's nothing between that server and your other
2004-02-14 19:06:39 +01:00
internal systems. For the cost of another NIC and a cross-over
cable, you can put your server in a DMZ such that it is isolated
from your local systems - assuming that the Server can be located
near the Firewall, of course :-)</para>
</listitem>
<listitem >
<para > The accessibility problem is best solved using <ulink
2004-08-17 00:17:09 +02:00
url="shorewall_setup_guide.htm#DNS">Bind Version 9
<quote > views</quote> </ulink> (or using a separate DNS server for
local clients) such that www.mydomain.com resolves to 130.141.100.69
externally and 192.168.1.5 internally. That's what I do here at
shorewall.net for my local systems that use one-to-one NAT.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</itemizedlist>
<para > If you insist on an IP solution to the accessibility problem
rather than a DNS solution, then assuming that your external interface
is eth0 and your internal interface is eth1 and that eth1 has IP address
2005-03-01 21:20:26 +01:00
192.168.1.254 with subnet 192.168.1.0/24:<warning >
<para > All traffic redirected through use of this hack will look to
the server as if it came from the firewall (192.168.1.254) rather
than from the original client!</para>
2004-08-17 00:17:09 +02:00
</warning> </para>
2004-02-14 19:06:39 +01:00
<itemizedlist >
<listitem >
<para > In <filename > /etc/shorewall/interfaces</filename> :</para>
<programlisting > #ZONE INTERFACE BROADCAST OPTIONS
loc eth1 detect <emphasis role= "bold" > routeback</emphasis> </programlisting>
</listitem>
<listitem >
2004-08-11 02:18:47 +02:00
<para > In <filename > /etc/shorewall/masq</filename> :</para>
2004-02-14 19:06:39 +01:00
2004-08-11 02:18:47 +02:00
<programlisting > #INTERFACE SUBNET ADDRESS PROTO PORT(S)
2004-08-17 00:17:09 +02:00
eth1:192.168.1.5 eth1 192.168.1.254 tcp www</programlisting>
2004-08-11 02:18:47 +02:00
</listitem>
<listitem >
<para > In <filename > /etc/shorewall/rules</filename> :</para>
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT SOURCE ORIGINAL
# PORT DEST.
DNAT loc loc:192.168.1.5 tcp www - 130.151.100.69</programlisting>
2004-02-14 19:06:39 +01:00
<para > That rule only works of course if you have a static external
IP address. If you have a dynamic IP address and are running
2004-09-04 20:57:53 +02:00
Shorewall 1.3.4 through Shorewall 2.0.* then include this in
2004-08-17 00:17:09 +02:00
<filename > /etc/shorewall/init</filename> :</para>
2004-02-14 19:06:39 +01:00
<programlisting > <command > ETH0_IP=`find_interface_address eth0`</command> </programlisting>
2004-09-04 20:57:53 +02:00
<para > For users of Shorewall 2.1.0 and later:</para>
<programlisting > <command > ETH0_IP=`find_first_interface_address eth0`</command> </programlisting>
2004-02-14 19:06:39 +01:00
<para > and make your DNAT rule:</para>
2004-08-11 02:18:47 +02:00
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT SOURCE ORIGINAL
# PORT DEST.
DNAT loc loc:192.168.1.5 tcp www - $ETH0_IP</programlisting>
2004-02-14 19:06:39 +01:00
<para > Using this technique, you will want to configure your
DHCP/PPPoE client to automatically restart Shorewall each time that
you get a new IP address.</para>
</listitem>
</itemizedlist>
<section id= "faq2a" >
<title > (FAQ 2a) I have a zone <quote > Z</quote> with an RFC1918 subnet
and I use one-to-one NAT to assign non-RFC1918 addresses to hosts in
Z. Hosts in Z cannot communicate with each other using their external
2004-08-17 00:17:09 +02:00
(non-RFC1918 addresses) so they can't access each other using their
DNS names.</title>
2004-02-14 19:06:39 +01:00
<note >
<para > If the ALL INTERFACES column in /etc/shorewall/nat is empty or
contains <quote > Yes</quote> , you will also see log messages like the
following when trying to access a host in Z from another host in Z
2004-08-17 00:17:09 +02:00
using the destination hosts's public address:</para>
2004-02-14 19:06:39 +01:00
<programlisting > Oct 4 10:26:40 netgw kernel:
Shorewall:FORWARD:REJECT:IN=eth1 OUT=eth1 SRC=192.168.118.200
DST=192.168.118.210 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=1342 DF
PROTO=TCP SPT=1494 DPT=1491 WINDOW=17472 RES=0x00 ACK SYN URGP=0</programlisting>
</note>
<para > <emphasis role= "bold" > Answer:</emphasis> This is another problem
that is best solved using Bind Version 9 <quote > views</quote> . It
allows both external and internal clients to access a NATed host using
2004-08-17 00:17:09 +02:00
the host's DNS name.</para>
2004-02-14 19:06:39 +01:00
<para > Another good way to approach this problem is to switch from
one-to-one NAT to Proxy ARP. That way, the hosts in Z have non-RFC1918
addresses and can be accessed externally and internally using the same
address.</para>
2004-08-17 00:17:09 +02:00
<para > If you don't like those solutions and prefer routing all Z-> Z
traffic through your firewall then:</para>
2004-02-14 19:06:39 +01:00
<orderedlist >
<listitem >
<para > Set the routeback option on the interface to Z.</para>
</listitem>
<listitem >
<para > Set the ALL INTERFACES column in the nat file to
<quote > Yes</quote> .</para>
</listitem>
</orderedlist>
<example >
<title > Example:</title>
<literallayout > Zone: dmz Interface: eth2 Subnet: 192.168.2.0/24</literallayout>
<para > In <filename > /etc/shorewall/interfaces</filename> :</para>
<programlisting > #ZONE INTERFACE BROADCAST OPTIONS
2004-12-18 18:08:10 +01:00
dmz eth2 192.168.2.255 <emphasis role= "bold" > routeback</emphasis> </programlisting>
2004-02-14 19:06:39 +01:00
<para > In <filename > /etc/shorewall/na</filename> t, be sure that you
have <quote > Yes</quote> in the ALL INTERFACES column.</para>
</example>
</section>
</section>
</section>
<section >
<title > Netmeeting/MSN</title>
<section id= "faq3" >
<title > (FAQ 3) I want to use Netmeeting or MSN Instant Messenger with
Shorewall. What do I do?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> There is an <ulink
url="http://www.kfki.hu/%7Ekadlec/sw/netfilter/newnat-suite/">H.323
connection tracking/NAT module</ulink> that helps with Netmeeting. Note
however that one of the Netfilter developers recently posted the
following:</para>
<blockquote >
2004-08-17 00:17:09 +02:00
<para > <programlisting > > I know PoM -ng is going to address this issue, but till it is ready, and
> all the extras are ported to it, is there any way to use the h.323
> contrack module kernel patch with a 2.6 kernel?
> Running 2.6.1 - no 2.4 kernel stuff on the system, so downgrade is not
> an option... The module is not ported yet to 2.6, sorry.
> Do I have any options besides a gatekeeper app (does not work in my
> network) or a proxy (would prefer to avoid them)?
2004-06-19 18:05:50 +02:00
I suggest everyone to setup a proxy (gatekeeper) instead: the module is
really dumb and does not deserve to exist at all. It was an excellent tool
to debug/develop the newnat interface.</programlisting> </para>
2004-02-14 19:06:39 +01:00
</blockquote>
<para > Look <ulink url= "http://linux-igd.sourceforge.net" > here</ulink>
for a solution for MSN IM but be aware that there are significant
security risks involved with this solution. Also check the Netfilter
2004-08-17 00:17:09 +02:00
mailing list archives at <ulink
url="http://www.netfilter.org">http://www.netfilter.org</ulink> .</para>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section >
<title > Open Ports</title>
<section id= "faq4" >
<title > (FAQ 4) I just used an online port scanner to check my firewall
and it shows some ports as <quote > closed</quote> rather than
<quote > blocked</quote> . Why?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> (Shorewall versions prior
to 2.0.0 only). The common.def included with version 1.3.x always
rejects connection requests on TCP port 113 rather than dropping them.
This is necessary to prevent outgoing connection problems to services
that use the <quote > Auth</quote> mechanism for identifying requesting
users. Shorewall also rejects TCP ports 135, 137, 139 and 445 as well as
UDP ports 137-139. These are ports that are used by Windows (Windows
<emphasis > can</emphasis> be configured to use the DCE cell locator on
port 135). Rejecting these connection requests rather than dropping them
cuts down slightly on the amount of Windows chatter on LAN segments
connected to the Firewall.</para>
2004-08-17 00:17:09 +02:00
<para > If you are seeing port 80 being <quote > closed</quote> , that's
2004-02-14 19:06:39 +01:00
probably your ISP preventing you from running a web server in violation
of your Service Agreement.</para>
<tip >
<para > You can change the default behavior of Shorewall through use of
an /etc/shorewall/common file. See the <ulink
2004-08-17 00:17:09 +02:00
url="shorewall_extension_scripts.htm">Extension Script
Section</ulink> .</para>
2004-02-14 19:06:39 +01:00
</tip>
<tip >
<para > Beginning with Shorewall 1.4.9, Shorewall no longer rejects the
Windows SMB ports (135-139 and 445) by default and silently drops them
instead.</para>
</tip>
<para > <emphasis role= "bold" > Answer:</emphasis> (Shorewall versions 2.0.0
and later). The default Shorewall setup invokes the <emphasis
role="bold">Drop</emphasis> action prior to enforcing a DROP policy and
the default policy to all zone from the internet is DROP. The Drop
2004-12-23 23:28:58 +01:00
action is defined in
<filename > /usr/share/shorewall/action.Drop</filename> which in turn
invokes the <emphasis role= "bold" > RejectAuth</emphasis> action (defined
in <filename > /usr/share/shorewall/action.RejectAuth</filename> ). This is
2004-08-17 00:17:09 +02:00
necessary to prevent outgoing connection problems to services that use
the <quote > Auth</quote> mechanism for identifying requesting users. That
is the only service which the default setup rejects.</para>
2004-02-14 19:06:39 +01:00
<para > If you are seeing closed TCP ports other than 113 (auth) then
either you have added rules to REJECT those ports or a router outside of
2004-08-17 00:17:09 +02:00
your firewall is responding to connection requests on those
ports.</para>
2004-02-14 19:06:39 +01:00
<section id= "faq4a" >
<title > (FAQ 4a) I just ran an nmap UDP scan of my firewall and it
showed 100s of ports as open!!!!</title>
<para > <emphasis role= "bold" > Answer:</emphasis> Take a deep breath and
read the nmap man page section about UDP scans. If nmap gets <emphasis
role="bold">nothing</emphasis> back from your firewall then it reports
the port as open. If you want to see which UDP ports are really open,
2004-08-17 00:17:09 +02:00
temporarily change your net-> all policy to REJECT, restart
2004-02-14 19:06:39 +01:00
Shorewall and do the nmap UDP scan again.</para>
</section>
<section id= "faq4b" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 4b) I have a port that I can't close no matter how I
2004-02-14 19:06:39 +01:00
change my rules.</title>
<para > I had a rule that allowed telnet from my local network to my
firewall; I removed that rule and restarted Shorewall but my telnet
session still works!!!</para>
<para > <emphasis role= "bold" > Answer:</emphasis> Rules only govern the
establishment of new connections. Once a connection is established
through the firewall it will be usable until disconnected (tcp) or
until it times out (other protocols). If you stop telnet and try to
establish a new session your firerwall will block that attempt.</para>
</section>
<section id= "faq4c" >
2004-11-09 22:55:11 +01:00
<title > (FAQ 4c) How do I use Shorewall with PortSentry?</title>
2004-02-14 19:06:39 +01:00
<para > <ulink
2004-08-17 00:17:09 +02:00
url="http://www.shorewall.net/pub/shorewall/contrib/PortsentryHOWTO.txt">Here's
a writeup</ulink> on a nice integration of Shorewall and
PortSentry.</para>
2004-02-14 19:06:39 +01:00
</section>
</section>
</section>
<section >
<title > Connection Problems</title>
<section id= "faq5" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 5) I've installed Shorewall and now I can't ping through the
firewall</title>
2004-02-14 19:06:39 +01:00
2004-05-22 18:15:58 +02:00
<para > <emphasis role= "bold" > Answer:</emphasis> For a complete
description of Shorewall <quote > ping</quote> management, see <ulink
url="ping.html">this page</ulink> .</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq15" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 15) My local systems can't see out to the net</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> Every time I read
2004-08-17 00:17:09 +02:00
<quote > systems can't see out to the net</quote> , I wonder where the
2004-02-14 19:06:39 +01:00
poster bought computers with eyes and what those computers will
<quote > see</quote> when things are working properly. That aside, the
most common causes of this problem are:</para>
<orderedlist >
<listitem >
2004-08-17 00:17:09 +02:00
<para > The default gateway on each local system isn't set to the IP
address of the local firewall interface.</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
<para > The entry for the local network in the /etc/shorewall/masq
file is wrong or missing.</para>
</listitem>
<listitem >
<para > The DNS settings on the local systems are wrong or the user is
2004-08-17 00:17:09 +02:00
running a DNS server on the firewall and hasn't enabled UDP and TCP
port 53 from the firewall to the internet.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</orderedlist>
</section>
<section id= "faq29" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 29) FTP Doesn't Work</title>
2004-02-14 19:06:39 +01:00
2004-08-17 00:17:09 +02:00
<para > See the <ulink url= "FTP.html" > Shorewall and FTP
page</ulink> .</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq33" >
<title > (FAQ 33) From clients behind the firewall, connections to some
sites fail. Connections to the same sites from the firewall itself work
2004-08-17 00:17:09 +02:00
fine. What's wrong.</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer</emphasis> : Most likely, you need to
2004-08-17 00:17:09 +02:00
set CLAMPMSS=Yes in <ulink
url="Documentation.htm#Conf">/etc/shorewall/shorewall.conf</ulink> .</para>
2004-02-14 19:06:39 +01:00
</section>
2004-03-17 16:03:46 +01:00
<section id= "faq35" >
<title > (FAQ 35) I have two Ethernet interfaces to my local network which
2004-08-17 00:17:09 +02:00
I have bridged. When Shorewall is started, I'm unable to pass traffic
through the bridge. I have defined the bridge interface (br0) as the
local interface in /etc/shorewall/interfaces; the bridged Ethernet
2004-03-17 16:03:46 +01:00
interfaces are not defined to Shorewall. How do I tell Shorewall to
allow traffic through the bridge?</title>
<para > Answer: Add the <firstterm > routeback</firstterm> option to
<filename class= "devicefile" > br0</filename> in <ulink
url="Documentation.htm#Interfaces">/etc/shorewall/interfaces</ulink> .</para>
2004-09-24 00:50:12 +02:00
<para > For more information on this type of configuration, see the <ulink
url="SimpleBridge.html">Shorewall Simple Bridge
documentation</ulink> .</para>
2004-03-17 16:03:46 +01:00
</section>
2004-10-14 21:20:17 +02:00
<section id= "faq40" >
<title > (FAQ 40) Shorewall is Blocking my OpenVPN Tunnel</title>
<para > I have this entry in <ulink
url="Documentation.htm#Tunnels">/etc/shorewall/tunnels</ulink> :</para>
<programlisting > # TYPE ZONE GATEWAY GATEWAY
# ZONE
openvpn:5000 net 69.145.71.133</programlisting>
<para > Yet I am seeing this log message:</para>
<programlisting > Oct 12 13:41:03 localhost kernel: Shorewall:net2all:DROP:IN=eth0 OUT=
MAC=00:04:5a:7f:92:9f:00:b0:c2:89:68:e4:08:00 SRC=69.145.71.133
DST=216.187.138.18 LEN=42 TOS=0x00 PREC=0x00 TTL=46 ID=11 DF PROTO=UDP
SPT=33120 DPT=5000 LEN=22</programlisting>
<para > <emphasis role= "bold" > Answer</emphasis> : Shorewall's <emphasis
role="bold">openvpn</emphasis> tunnel type assumes that OpenVPN will be
using the same port (default 5000) for both the source and destination
port. From the above message, it is clear that the remote client is
using source port 33120. The solution is to replace your <ulink
url="Documentation.htm#Tunnels">/etc/shorewall/tunnels</ulink> entry
with this one:</para>
<programlisting > # TYPE ZONE GATEWAY GATEWAY
# ZONE
generic:udp:5000 net 69.145.71.133</programlisting>
</section>
2004-02-14 19:06:39 +01:00
</section>
<section >
<title > Logging</title>
<section id= "faq6" >
<title > (FAQ 6) Where are the log messages written and how do I change
the destination?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> NetFilter uses the
2004-08-17 00:17:09 +02:00
kernel's equivalent of syslog (see <quote > man syslog</quote> ) to log
messages. It always uses the LOG_KERN (kern) facility (see <quote > man
openlog</quote> ) and you get to choose the log level (again, see
<quote > man syslog</quote> ) in your <ulink
2004-02-14 19:06:39 +01:00
url="Documentation.htm#Policy">policies</ulink> and <ulink
url="Documentation.htm#Rules">rules</ulink> . The destination for
2004-10-14 21:20:17 +02:00
messages logged by syslog is controlled by
2004-08-17 00:17:09 +02:00
<filename > /etc/syslog.conf</filename> (see <quote > man
syslog.conf</quote> ). When you have changed /etc/syslog.conf, be sure to
restart syslogd (on a RedHat system, <quote > service syslog
restart</quote> ).</para>
2004-02-14 19:06:39 +01:00
<para > By default, older versions of Shorewall ratelimited log messages
through <ulink url= "Documentation.htm#Conf" > settings</ulink> in
<filename > /etc/shorewall/shorewall.conf</filename> -- If you want to log
all messages, set:</para>
2004-08-17 00:17:09 +02:00
<programlisting > LOGLIMIT=""
LOGBURST=""</programlisting>
2004-02-14 19:06:39 +01:00
<para > Beginning with Shorewall version 1.3.12, you can <ulink
url="shorewall_logging.html">set up Shorewall to log all of its messages
to a separate file</ulink> .</para>
<section id= "faq6a" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 6a) Are there any log parsers that work with
Shorewall?</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> Here are several links
that may be helpful:</para>
<literallayout > <ulink
2004-08-17 00:17:09 +02:00
url="http://www.shorewall.net/pub/shorewall/parsefw/">http://www.shorewall.net/pub/shorewall/parsefw/</ulink>
2004-02-14 19:06:39 +01:00
<ulink url= "http://www.fireparse.com" > http://www.fireparse.com</ulink>
<ulink url= "http://cert.uni-stuttgart.de/projects/fwlogwatch" > http://cert.uni-stuttgart.de/projects/fwlogwatch</ulink>
<ulink url= "http://www.logwatch.org" > http://www.logwatch.org</ulink>
<ulink url= "http://gege.org/iptables" > http://gege.org/iptables</ulink>
<ulink url= "http://home.regit.org/ulogd-php.html" > http://home.regit.org/ulogd-php.html</ulink> </literallayout>
2004-03-17 16:03:46 +01:00
<para > I personally use Logwatch. It emails me a report each day from
2004-02-14 19:06:39 +01:00
my various systems with each report summarizing the logged activity on
the corresponding system.</para>
</section>
<section id= "faq6b" >
<title > (FAQ 2b) DROP messages on port 10619 are flooding the logs with
their connect requests. Can i exclude these error messages for this
port temporarily from logging in Shorewall?</title>
<para > Temporarily add the following rule:</para>
<programlisting > DROP net fw udp 10619</programlisting>
</section>
<section id= "faq6d" >
<title > (FAQ 6d) Why is the MAC address in Shorewall log messages so
long? I thought MAC addresses were only 6 bytes in length.</title>
<para > What is labeled as the MAC address in a Shorewall log message is
actually the Ethernet frame header. It contains:</para>
<itemizedlist >
<listitem >
<para > the destination MAC address (6 bytes)</para>
</listitem>
<listitem >
<para > the source MAC address (6 bytes)</para>
</listitem>
<listitem >
<para > the ethernet frame type (2 bytes)</para>
</listitem>
</itemizedlist>
2004-08-17 00:17:09 +02:00
<para > <example >
<title > Example</title>
<para > <programlisting > MAC=00:04:4c:dc:e2:28:00:b0:8e:cf:3c:4c:08:00</programlisting> <itemizedlist >
<listitem >
<para > Destination MAC address = 00:04:4c:dc:e2:28</para>
</listitem>
<listitem >
<para > Source MAC address = 00:b0:8e:cf:3c:4c</para>
</listitem>
<listitem >
<para > Ethernet Frame Type = 08:00 (IP Version 4)</para>
</listitem>
</itemizedlist> </para>
</example> </para>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section id= "faq16" >
<title > (FAQ 16) Shorewall is writing log messages all over my console
making it unusable!</title>
<para > <emphasis role= "bold" > Answer:</emphasis> If you are running
2004-08-17 00:17:09 +02:00
Shorewall version 1.4.4 or 1.4.4a then check the <ulink
url="errata.htm">errata</ulink> . Otherwise:</para>
2004-02-14 19:06:39 +01:00
<itemizedlist >
<listitem >
<para > Find where klogd is being started (it will be from one of the
files in /etc/init.d -- sysklogd, klogd, ...). Modify that file or
the appropriate configuration file so that klogd is started with
2004-08-17 00:17:09 +02:00
<quote > -c <emphasis > < n> </emphasis> </quote> where
<emphasis > < n> </emphasis> is a log level of 5 or less;
or</para>
2004-02-14 19:06:39 +01:00
</listitem>
<listitem >
2004-08-17 00:17:09 +02:00
<para > See the <quote > dmesg</quote> man page (<quote > man
dmesg</quote> ). You must add a suitable <quote > dmesg</quote> command
to your startup scripts or place it in /etc/shorewall/start.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</itemizedlist>
<tip >
<para > Under RedHat and Mandrake, the max <ulink
url="shorewall_logging.html">log level</ulink> that is sent to the
console is specified in /etc/sysconfig/init in the LOGLEVEL variable.
Set <quote > LOGLEVEL=5</quote> to suppress info (log level 6) messages
on the console.</para>
</tip>
<tip >
<para > Under Debian, you can set KLOGD=<quote > -c 5</quote> in
<filename > /etc/init.d/klogd</filename> to suppress info (log level 6)
messages on the console.</para>
</tip>
<tip >
<para > Under SuSE, add <quote > -c 5</quote> to KLOGD_PARAMS in
/etc/sysconfig/syslog to suppress info (log level 6) messages on the
console.</para>
</tip>
</section>
<section id= "faq17" >
2004-11-09 22:55:11 +01:00
<title > (FAQ 17) Why are these packets being Dropped/Rejected?/How do I
decode Shorewall log messages?</title>
2004-02-14 19:06:39 +01:00
2004-09-24 00:50:12 +02:00
<para > <emphasis role= "bold" > Answer:</emphasis> Logging of
dropped/rejected packets occurs out of a number of chains (as indicated
in the log message) in Shorewall:</para>
2004-02-14 19:06:39 +01:00
<variablelist >
<varlistentry >
<term > man1918 or logdrop</term>
<listitem >
2004-08-17 00:17:09 +02:00
<para > The destination address is listed in
<filename > /usr/share/shorewall/rfc1918</filename> with a <emphasis
role="bold">logdrop</emphasis> target -- see <filename > <ulink
url="Documentation.htm#rfc1918">/usr/share/shorewall/rfc1918</ulink> </filename> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > rfc1918 or logdrop</term>
<listitem >
2004-03-17 16:03:46 +01:00
<para > The source or destination address is listed in
<filename > /usr/share/shorewall/rfc1918</filename> with a <emphasis
role="bold">logdrop</emphasis> target -- see <filename > <ulink
url="Documentation.htm#rfc1918">/usr/share/shorewall/rfc1918</ulink> </filename> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry id= "all2all" >
2004-08-17 00:17:09 +02:00
<term > all2< zone> , < zone> 2all or all2all</term>
2004-02-14 19:06:39 +01:00
<listitem >
2004-08-17 00:17:09 +02:00
<para > You have a <ulink
url="Documentation.htm#Policy">policy</ulink> that specifies a log
level and this packet is being logged under that policy. If you
intend to ACCEPT this traffic then you need a <ulink
url="Documentation.htm#Rules">rule</ulink> to that effect.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
2004-08-17 00:17:09 +02:00
<term > < zone1> 2< zone2> </term>
2004-02-14 19:06:39 +01:00
<listitem >
2004-08-17 00:17:09 +02:00
<para > Either you have a <ulink
url="Documentation.htm#Policy">policy</ulink> for <emphasis
role="bold">< zone1> </emphasis> to <emphasis
role="bold">< zone2> </emphasis> that specifies a log level
2004-02-14 19:06:39 +01:00
and this packet is being logged under that policy or this packet
matches a <ulink url= "Documentation.htm#Rules" > rule</ulink> that
includes a log level.</para>
</listitem>
</varlistentry>
2004-12-04 19:37:02 +01:00
<varlistentry >
<term > @< source> 2< dest> </term>
<listitem >
<para > You have a policy for traffic from < <emphasis
role="bold">source</emphasis> > to < <emphasis
role="bold">dest</emphasis> > that specifies TCP connection rate
limiting (value in the LIMIT:BURST column). The logged packet
exceeds that limit and was dropped. Note that these log messages
themselves are severely rate-limited so that a syn-flood won't
generate a secondary DOS because of excessive log message. These
log messages were added in Shorewall 2.2.0 Beta 7.</para>
</listitem>
</varlistentry>
2004-02-14 19:06:39 +01:00
<varlistentry >
2004-08-17 00:17:09 +02:00
<term > < interface> _mac</term>
2004-02-14 19:06:39 +01:00
<listitem >
2004-08-17 00:17:09 +02:00
<para > The packet is being logged under the <emphasis
role="bold">maclist</emphasis> <ulink
url="Documentation.htm#Interfaces">interface
option</ulink> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > logpkt</term>
<listitem >
2004-08-17 00:17:09 +02:00
<para > The packet is being logged under the <emphasis
role="bold">logunclean</emphasis> <ulink
url="Documentation.htm#Interfaces">interface
option</ulink> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > badpkt</term>
<listitem >
2004-08-17 00:17:09 +02:00
<para > The packet is being logged under the <emphasis
role="bold">dropunclean</emphasis> <ulink
url="Documentation.htm#Interfaces">interface option</ulink> as
specified in the <emphasis role= "bold" > LOGUNCLEAN</emphasis>
setting in <ulink
url="Documentation.htm#Conf"><filename > /etc/shorewall/shorewall.conf</filename> </ulink> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > blacklst</term>
<listitem >
<para > The packet is being logged because the source IP is
blacklisted in the <filename > <ulink
url="Documentation.htm#Blacklist">/etc/shorewall/blacklist</ulink> </filename>
file.</para>
</listitem>
</varlistentry>
<varlistentry >
<term > newnotsyn</term>
<listitem >
<para > The packet is being logged because it is a TCP packet that
is not part of any current connection yet it is not a syn packet.
Options affecting the logging of such packets include <emphasis
2004-08-17 00:17:09 +02:00
role="bold">NEWNOTSYN</emphasis> and <emphasis
role="bold">LOGNEWNOTSYN</emphasis> in <ulink
url="Documentation.htm#Conf"><filename > /etc/shorewall/shorewall.conf</filename> </ulink> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > INPUT or FORWARD</term>
<listitem >
2004-08-17 00:17:09 +02:00
<para > The packet has a source IP address that isn't in any of your
defined zones (<quote > shorewall check</quote> and look at the
2004-02-14 19:06:39 +01:00
printed zone definitions) or the chain is FORWARD and the
2004-09-24 00:50:12 +02:00
destination IP isn't in any of your defined zones. If the chain is
FORWARD and the IN and OUT interfaces are the same, then you
probably need the <emphasis role= "bold" > routeback</emphasis>
option on that interface in <filename > <ulink
url="Documentation.htm#Interfaces">/etc/shorewall/interfaces</ulink> </filename>
or you need the <emphasis role= "bold" > routeback</emphasis> option
in the relevant entry in <filename > <ulink
url="Documentation.htm#Hosts">/etc/shorewall/hosts</ulink> </filename> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
2005-03-01 22:20:02 +01:00
<varlistentry >
<term > OUTPUT</term>
<listitem >
<para > The packet has a destination IP address that isn't in any of
your defined zones("shorewall check" and look at the printed zone
definitions).</para>
</listitem>
</varlistentry>
2004-02-14 19:06:39 +01:00
<varlistentry >
<term > logflags</term>
<listitem >
<para > The packet is being logged because it failed the checks
implemented by the <emphasis role= "bold" > tcpflags</emphasis>
2004-08-17 00:17:09 +02:00
<ulink url= "Documentation.htm#Interfaces" > interface
option</ulink> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
</variablelist>
<example >
<title > Here is an example:</title>
<programlisting > Jun 27 15:37:56 gateway kernel:
2004-05-09 00:31:54 +02:00
Shorewall:<emphasis role= "bold" > all2all:REJECT</emphasis> :<emphasis
2004-08-17 00:17:09 +02:00
role="bold">IN=eth2</emphasis> <emphasis role= "bold" > OUT=eth1</emphasis> <emphasis
role="bold">SRC=192.168.2.2</emphasis>
2004-05-09 00:31:54 +02:00
<emphasis role= "bold" > DST=192.168.1.3 </emphasis> LEN=67 TOS=0x00 PREC=0x00 TTL=63 ID=5805 DF <emphasis
2004-08-17 00:17:09 +02:00
role="bold">PROTO=UDP</emphasis>
2004-05-09 00:31:54 +02:00
SPT=1803 <emphasis role= "bold" > DPT=53</emphasis> LEN=47</programlisting>
2004-02-14 19:06:39 +01:00
2004-08-17 00:17:09 +02:00
<para > Let's look at the important parts of this message:</para>
2004-02-14 19:06:39 +01:00
<variablelist >
<varlistentry >
<term > all2all:REJECT</term>
<listitem >
2004-08-17 00:17:09 +02:00
<para > This packet was REJECTed out of the <emphasis
role="bold">all2all</emphasis> chain -- the packet was rejected
under the <quote > all</quote> -> <quote > all</quote> REJECT
2004-09-24 00:50:12 +02:00
policy (<link linkend= "all2all" > all2all</link> above).</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > IN=eth2</term>
<listitem >
<para > the packet entered the firewall via eth2. If you see
<quote > IN=</quote> with no interface name, the packet originated
on the firewall itself.</para>
</listitem>
</varlistentry>
<varlistentry >
<term > OUT=eth1</term>
<listitem >
<para > if accepted, the packet would be sent on eth1. If you see
<quote > OUT=</quote> with no interface name, the packet would be
processed by the firewall itself.</para>
</listitem>
</varlistentry>
<varlistentry >
<term > SRC=192.168.2.2</term>
<listitem >
<para > the packet was sent by 192.168.2.2</para>
</listitem>
</varlistentry>
<varlistentry >
<term > DST=192.168.1.3</term>
<listitem >
<para > the packet is destined for 192.168.1.3</para>
</listitem>
</varlistentry>
<varlistentry >
<term > PROTO=UDP</term>
<listitem >
<para > UDP Protocol</para>
</listitem>
</varlistentry>
<varlistentry >
<term > DPT=53</term>
<listitem >
<para > The destination port is 53 (DNS)</para>
</listitem>
</varlistentry>
</variablelist>
<para > For additional information about the log message, see <ulink
url="http://logi.cc/linux/netfilter-log-format.php3">http://logi.cc/linux/netfilter-log-format.php3</ulink> .</para>
<para > In this case, 192.168.2.2 was in the <quote > dmz</quote> zone and
2004-08-17 00:17:09 +02:00
192.168.1.3 is in the <quote > loc</quote> zone. I was missing the
rule:</para>
2004-02-14 19:06:39 +01:00
<programlisting > ACCEPT dmz loc udp 53</programlisting>
</example>
</section>
<section id= "faq21" >
<title > (FAQ 21) I see these strange log entries occasionally; what are
they?</title>
<programlisting > Nov 25 18:58:52 linux kernel:
Shorewall:net2all:DROP:IN=eth1 OUT=
MAC=00:60:1d:f0:a6:f9:00:60:1d:f6:35:50:08:00 SRC=206.124.146.179
DST=192.0.2.3 LEN=56 TOS=0x00 PREC=0x00 TTL=110 ID=18558 PROTO=ICMP
TYPE=3 CODE=3 [SRC=192.0.2.3 DST=172.16.1.10 LEN=128 TOS=0x00 PREC=0x00
TTL=47 ID=0 DF PROTO=UDP SPT=53 DPT=2857 LEN=108 ]</programlisting>
<para > 192.0.2.3 is external on my firewall... 172.16.0.0/24 is my
internal LAN</para>
<para > <emphasis role= "bold" > Answer:</emphasis> While most people
associate the Internet Control Message Protocol (ICMP) with
<quote > ping</quote> , ICMP is a key piece of the internet. ICMP is used
to report problems back to the sender of a packet; this is what is
happening here. Unfortunately, where NAT is involved (including SNAT,
DNAT and Masquerade), there are a lot of broken implementations. That is
2004-11-26 19:53:04 +01:00
what you are seeing with these messages. When Netfilter displays these
messages, the part before the "[" describes the ICMP packet and the part
between the "[" and "]" describes the packet for which the ICMP is a
response.</para>
2004-02-14 19:06:39 +01:00
<para > Here is my interpretation of what is happening -- to confirm this
analysis, one would have to have packet sniffers placed a both ends of
the connection.</para>
<para > Host 172.16.1.10 behind NAT gateway 206.124.146.179 sent a UDP DNS
query to 192.0.2.3 and your DNS server tried to send a response (the
response information is in the brackets -- note source port 53 which
marks this as a DNS reply). When the response was returned to to
206.124.146.179, it rewrote the destination IP TO 172.16.1.10 and
forwarded the packet to 172.16.1.10 who no longer had a connection on
UDP port 2857. This causes a port unreachable (type 3, code 3) to be
generated back to 192.0.2.3. As this packet is sent back through
206.124.146.179, that box correctly changes the source address in the
2004-08-17 00:17:09 +02:00
packet to 206.124.146.179 but doesn't reset the DST IP in the original
DNS response similarly. When the ICMP reaches your firewall (192.0.2.3),
your firewall has no record of having sent a DNS reply to 172.16.1.10 so
this ICMP doesn't appear to be related to anything that was sent. The
final result is that the packet gets logged and dropped in the all2all
chain. I have also seen cases where the source IP in the ICMP itself
isn't set back to the external IP of the remote NAT gateway; that causes
your firewall to log and drop the packet out of the rfc1918 chain
because the source IP is reserved by RFC 1918.</para>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section >
<title > Routing</title>
<section id= "faq32" >
<title > (FAQ 32) My firewall has two connections to the internet from two
different ISPs. How do I set this up in Shorewall?</title>
2005-03-02 02:42:46 +01:00
<important >
<para > Anyone with two Internet connections MUST read and understand
<ulink url= "Shorewall_and_Routing.html" > this article on Shorewall and
Routing</ulink> . If you don't, you will be completely lost trying to
make this work.</para>
</important>
2004-02-14 19:06:39 +01:00
<para > Setting this up in Shorewall is easy; setting up the routing is a
bit harder.</para>
<para > Assuming that <filename class= "devicefile" > eth0</filename> and
<filename class= "devicefile" > eth1</filename> are the interfaces to the
two ISPs then:</para>
<para > <filename > /etc/shorewall/interfaces</filename> :</para>
<programlisting > #ZONE INTERFACE BROADCAST OPTIONS
net eth0 detect
net eth1 detect</programlisting>
<para > <filename > /etc/shorewall/policy</filename> :</para>
<programlisting > #SOURCE DESTINATION POLICY LIMIT:BURST
net net DROP</programlisting>
<para > If you have masqueraded hosts, be sure to update
<filename > /etc/shorewall/masq</filename> to masquerade to both ISPs. For
example, if you masquerade all hosts connected to <filename
class="devicefile">eth2</filename> then:</para>
<programlisting > #INTERFACE SUBNET ADDRESS
eth0 eth2
eth1 eth2</programlisting>
<para > <citetitle > There was an article in SysAdmin covering this topic.
It may be found at <ulink
url="http://www.samag.com/documents/s=1824/sam0201h/">http://www.samag.com/documents/s=1824/sam0201h/</ulink> </citetitle> </para>
<para > <citetitle > The following information regarding setting up routing
for this configuration is reproduced from the <ulink
url="http://www.lartc.org">LARTC HOWTO</ulink> and has not been verified
by the author. If you have questions or problems with the instructions
given below, please post to the <ulink
2004-08-17 00:17:09 +02:00
url="http://www.lartc.org/#mailinglist">LARTC mailing
list</ulink> .</citetitle> </para>
2004-02-14 19:06:39 +01:00
<sidebar >
<para > A common configuration is the following, in which there are two
providers that connect a local network (or even a single machine) to
the big Internet.</para>
<programlisting > ________
+------------+ /
| | |
+-------------+ Provider 1 +-------
__ | | | /
___/ \_ +------+-------+ +------------+ |
_/ \__ | if1 | /
/ \ | | |
| Local network -----+ Linux router | | Internet
\_ __/ | | |
\__ __/ | if2 | \
\___/ +------+-------+ +------------+ |
| | | \
+-------------+ Provider 2 +-------
| | |
+------------+ \________
</programlisting>
<para > There are usually two questions given this setup.</para>
<para > <emphasis role= "bold" > Split access</emphasis> </para>
<para > The first is how to route answers to packets coming in over a
particular provider, say Provider 1, back out again over that same
provider.</para>
<para > Let us first set some symbolical names. Let <emphasis
role="bold">$IF1</emphasis> be the name of the first interface (if1 in
the picture above) and <emphasis role= "bold" > $IF2</emphasis> the name
2004-08-17 00:17:09 +02:00
of the second interface. Then let <emphasis
role="bold">$IP1</emphasis> be the IP address associated with
<emphasis role= "bold" > $IF1</emphasis> and <emphasis
role="bold">$IP2</emphasis> the IP address associated with <emphasis
role="bold">$IF2</emphasis> . Next, let <emphasis
2004-02-14 19:06:39 +01:00
role="bold">$P1</emphasis> be the IP address of the gateway at
Provider 1, and <emphasis role= "bold" > $P2</emphasis> the IP address of
2004-08-17 00:17:09 +02:00
the gateway at provider 2. Finally, let <emphasis
role="bold">$P1_NET</emphasis> be the IP network <emphasis
role="bold">$P1</emphasis> is in, and <emphasis
role="bold">$P2_NET</emphasis> the IP network <emphasis
2004-02-14 19:06:39 +01:00
role="bold">$P2</emphasis> is in.</para>
<para > One creates two additional routing tables, say <emphasis
role="bold">T1</emphasis> and <emphasis role= "bold" > T2</emphasis> .
These are added in /etc/iproute2/rt_tables. Then you set up routing in
these tables as follows:</para>
<programlisting > ip route add $P1_NET dev $IF1 src $IP1 table T1
ip route add default via $P1 table T1
ip route add $P2_NET dev $IF2 src $IP2 table T2
ip route add default via $P2 table T2</programlisting>
<para > Nothing spectacular, just build a route to the gateway and build
a default route via that gateway, as you would do in the case of a
single upstream provider, but put the routes in a separate table per
provider. Note that the network route suffices, as it tells you how to
find any host in that network, which includes the gateway, as
specified above.</para>
<para > Next you set up the main routing table. It is a good idea to
route things to the direct neighbour through the interface connected
2004-08-17 00:17:09 +02:00
to that neighbour. Note the `src' arguments, they make sure the right
outgoing IP address is chosen.</para>
2004-02-14 19:06:39 +01:00
<programlisting > ip route add $P1_NET dev $IF1 src $IP1
ip route add $P2_NET dev $IF2 src $IP2</programlisting>
<para > Then, your preference for default route:</para>
<programlisting > ip route add default via $P1</programlisting>
<para > Next, you set up the routing rules. These actually choose what
routing table to route with. You want to make sure that you route out
a given interface if you already have the corresponding source
address:</para>
<programlisting > ip rule add from $IP1 table T1
ip rule add from $IP2 table T2</programlisting>
<para > This set of commands makes sure all answers to traffic coming in
on a particular interface get answered from that interface.</para>
<note >
2004-08-17 00:17:09 +02:00
<para > 'If $P0_NET is the local network and $IF0 is its interface,
the following additional entries are desirable:</para>
2004-02-14 19:06:39 +01:00
<programlisting format= "linespecific" > ip route add $P0_NET dev $IF0 table T1
ip route add $P2_NET dev $IF2 table T1
ip route add 127.0.0.0/8 dev lo table T1
ip route add $P0_NET dev $IF0 table T2
ip route add $P1_NET dev $IF1 table T2
ip route add 127.0.0.0/8 dev lo table T2</programlisting>
</note>
<para > Now, this is just the very basic setup. It will work for all
processes running on the router itself, and for the local network, if
it is masqueraded. If it is not, then you either have IP space from
both providers or you are going to want to masquerade to one of the
two providers. In both cases you will want to add rules selecting
which provider to route out from based on the IP address of the
machine in the local network.</para>
<para > <emphasis role= "bold" > Load balancing</emphasis> </para>
<para > The second question is how to balance traffic going out over the
two providers. This is actually not hard if you already have set up
split access as above.</para>
<para > Instead of choosing one of the two providers as your default
route, you now set up the default route to be a multipath route. In
the default kernel this will balance routes over the two providers. It
is done as follows (once more building on the example in the section
on split-access):</para>
<programlisting > ip route add default scope global nexthop via $P1 dev $IF1 weight 1 \
nexthop via $P2 dev $IF2 weight 1</programlisting>
<para > This will balance the routes over both providers. The <emphasis
role="bold">weight</emphasis> parameters can be tweaked to favor one
provider over the other.</para>
<note >
<para > balancing will not be perfect, as it is route based, and
routes are cached. This means that routes to often-used sites will
always be over the same provider.</para>
</note>
<para > Furthermore, if you really want to do this, you probably also
2004-08-17 00:17:09 +02:00
want to look at Julian Anastasov's patches at <ulink
2004-02-14 19:06:39 +01:00
url="http://www.ssi.bg/%7Eja/#routes">http://www.ssi.bg/~ja/#routes</ulink>
2004-08-17 00:17:09 +02:00
, Julian's route patch page. They will make things nicer to work
2004-02-14 19:06:39 +01:00
with.</para>
</sidebar>
2004-05-09 00:31:54 +02:00
<para > The following was contributed by Martin Brown and is an excerpt
from <citetitle > <ulink
url="http://www.docum.org/stef.coene/qos/faq/cache/44.html">http://www.docum.org/stef.coene/qos/faq/cache/44.html</ulink> </citetitle> .</para>
<sidebar >
<para > There are two issues requiring different handling when dealing
with multiple Internet providers on a given network. The below assumes
that the host which has multiple Internet connections is a
masquerading (or NATting) host and is at the chokepoint between the
internal and external networks. For the use of multiple inbound
connections to the same internal server (public IP A from ISP A and
public IP B from ISP B both get redirected to the same internal
server), the ideal solution involves using two private IP addresses on
the internal server. This leads to an end-to-end uniqueness of public
IP to private IP and can be easily accomplished by following the
directions here:</para>
<para > <ulink
url="http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-inbound"><citetitle > http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-inbound</citetitle> </ulink> </para>
<para > For the use of multiple outbound links to the Internet, there
2004-08-17 00:17:09 +02:00
are a number of different techniques. The simplest is identified
here:</para>
2004-05-09 00:31:54 +02:00
<para > <citetitle > <ulink
url="http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-outbound">http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-outbound</ulink> </citetitle> </para>
<para > Better (and more robust) techniques are available after a kernel
routing patch by Julian Anastasov. See the famous nano-howto.</para>
2004-08-17 00:17:09 +02:00
<para > <citetitle > <ulink
url="http://www.ssi.bg/~ja/">http://www.ssi.bg/~ja/</ulink> </citetitle> </para>
2004-05-09 00:31:54 +02:00
</sidebar>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section >
<title > Starting and Stopping</title>
<section id= "faq7" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 7) When I stop Shorewall using <quote > shorewall
stop</quote> , I can't connect to anything. Why doesn't that command
work?</title>
2004-02-14 19:06:39 +01:00
<para > The <quote > <command > stop</command> </quote> command is intended to
place your firewall into a safe state whereby only those hosts listed in
2004-08-17 00:17:09 +02:00
<filename > /etc/shorewall/routestopped</filename> ' are activated. If you
want to totally open up your firewall, you must use the
2004-02-14 19:06:39 +01:00
<quote > <command > shorewall clear</command> </quote> command.</para>
</section>
<section id= "faq8" >
<title > (FAQ 8) When I try to start Shorewall on RedHat, I get messages
2004-08-17 00:17:09 +02:00
about insmod failing -- what's wrong?</title>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> The output you will see
looks something like this:</para>
<programlisting > /lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o: insmod
/lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o failed
/lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o: insmod ip_tables failed
2004-08-17 00:17:09 +02:00
iptables v1.2.3: can't initialize iptables table `nat': iptables who? (do you need to insmod?)
2004-02-14 19:06:39 +01:00
Perhaps iptables or your kernel needs to be upgraded.</programlisting>
<para > This problem is usually corrected through the following sequence
of commands</para>
2004-03-17 16:03:46 +01:00
<programlisting > <command > service ipchains stop
2004-02-14 19:06:39 +01:00
chkconfig --delete ipchains
2004-03-17 16:03:46 +01:00
rmmod ipchains</command> </programlisting>
2004-02-14 19:06:39 +01:00
<para > Also, be sure to check the <ulink url= "errata.htm" > errata</ulink>
for problems concerning the version of iptables (v1.2.3) shipped with
RH7.2.</para>
<section id= "faq8a" >
<title > (FAQ 8a) When I try to start Shorewall on RedHat I get a
message referring me to FAQ #8</title>
<para > <emphasis role= "bold" > Answer:</emphasis> This is usually cured
2004-08-17 00:17:09 +02:00
by the sequence of commands shown above in <xref
linkend="faq8" />.</para>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section id= "faq9" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 9) Why can't Shorewall detect my interfaces properly at
2004-02-14 19:06:39 +01:00
startup?</title>
<para > I just installed Shorewall and when I issue the start command, I
see the following:</para>
<programlisting > Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf ...
Starting Shorewall...
Loading Modules...
Initializing...
Determining Zones...
Zones: net loc
Validating interfaces file...
Validating hosts file...
Determining Hosts in Zones...
<emphasis role= "bold" > Net Zone: eth0:0.0.0.0/0
</emphasis> <emphasis role= "bold" > Local Zone: eth1:0.0.0.0/0</emphasis>
Deleting user chains...
Creating input Chains...
...</programlisting>
2004-08-17 00:17:09 +02:00
<para > Why can't Shorewall detect my interfaces properly?</para>
2004-02-14 19:06:39 +01:00
<para > <emphasis role= "bold" > Answer:</emphasis> The above output is
perfectly normal. The Net zone is defined as all hosts that are
connected through eth0 and the local zone is defined as all hosts
connected through <filename class= "devicefile" > eth1</filename> . If you
are running Shorewall 1.4.10 or later, you can consider setting the
2004-08-17 00:17:09 +02:00
<ulink url= "Documentation.htm#Interfaces" > <emphasis
role="bold">detectnets</emphasis> interface option</ulink> on your local
interface (<filename class= "devicefile" > eth1</filename> in the above
example). That will cause Shorewall to restrict the local zone to only
those networks routed through that interface.</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq22" >
<title > (FAQ 22) I have some iptables commands that I want to run when
Shorewall starts. Which file do I put them in?</title>
<para > You can place these commands in one of the <ulink
2004-08-17 00:17:09 +02:00
url="shorewall_extension_scripts.htm">Shorewall Extension
Scripts</ulink> . Be sure that you look at the contents of the chain(s)
that you will be modifying with your commands to be sure that the
commands will do what they are intended. Many iptables commands
published in HOWTOs and other instructional material use the -A command
which adds the rules to the end of the chain. Most chains that Shorewall
constructs end with an unconditional DROP, ACCEPT or REJECT rule and any
rules that you add after that will be ignored. Check <quote > man
iptables</quote> and look at the -I (--insert) command.</para>
2004-02-14 19:06:39 +01:00
</section>
2004-03-17 16:03:46 +01:00
<section id= "faq34" >
<title > (FAQ 34) How can I speed up start (restart)?</title>
<para > Using a light-weight shell such as <command > ash</command> can
2004-08-17 00:17:09 +02:00
dramatically decrease the time required to <emphasis
role="bold">start</emphasis> or <emphasis role= "bold" > restart</emphasis>
Shorewall. See the SHOREWALL_SHELL variable in <filename > <ulink
2004-03-17 16:03:46 +01:00
url="Documentation.htm#Conf">shorewall.conf</ulink> </filename> .</para>
2004-05-09 00:31:54 +02:00
2004-11-09 22:55:11 +01:00
<para > Use a fast terminal emulator -- in particular the KDE konsole
scrolls much faster than the Gnome terminal. Also use the '-q' option if
you are restarting remotely or from a slow terminal (or redirect the
output to a file as in <command > shorewall restart >
/dev/null</command> ).</para>
2004-05-09 00:31:54 +02:00
<para > Beginning with Shorewall version 2.0.2 Beta 1, Shorewall supports
a fast start capability. To use this capability:</para>
<orderedlist >
<listitem >
<para > With Shorewall in the <ulink
url="starting_and_stopping_shorewall.htm">started state</ulink> , run
<command > shorewall save</command> . This creates the script
<filename > /var/lib/shorewall/restore</filename> .</para>
</listitem>
<listitem >
<para > Use the <emphasis role= "bold" > -f </emphasis> option to the
start command (e.g., <command > shorewall -f start</command> ). This
2004-08-17 00:17:09 +02:00
causes Shorewall to look for the
<filename > /var/lib/shorewall/restore</filename> script and if that
script exists, it is run. Running
2004-05-09 00:31:54 +02:00
<filename > /var/lib/shorewall/restore</filename> takes much less time
than a full <command > shorewall start</command> .</para>
</listitem>
<listitem >
<para > The <filename > /etc/init.d/shorewall</filename> script that is
run at boot time uses the <emphasis role= "bold" > -f</emphasis>
option.</para>
</listitem>
<listitem >
<para > The <filename > /var/lib/shorewall/restore</filename> script can
be run any time to restore the firewall. The script may be run
directly or it may be run indirectly using the <command > shorewall
restore</command> command.</para>
</listitem>
</orderedlist>
<para > If you change your Shorewall configuration, you must execute a
<emphasis role= "bold" > shorewall start</emphasis> (without <emphasis
role="bold">-f</emphasis> ) or <command > shorewall restart</command> prior
to doing another <command > shorewall save</command> . The
<command > shorewall save</command> command saves the currently running
configuration and not the one reflected in your updated configuration
files.</para>
<para > Likewise, if you change your Shorewall configuration then once you
are satisfied that it is working properly, you must do another
<command > shorewall save</command> . Otherwise at the next reboot, you
2004-08-17 00:17:09 +02:00
will revert to the old configuration stored in
<filename > /var/lib/shorewall/restore</filename> .</para>
2004-05-09 00:31:54 +02:00
<section id= "faq34a" >
<title > (FAQ 34a) I get errors about a host or network not found when I
run<filename > /var/lib/shorewall/restore</filename> . The
2004-08-17 00:17:09 +02:00
<command > shorewall restore</command> and <command > shorewall -f
start</command> commands gives the same result.</title>
2004-05-09 00:31:54 +02:00
<para > Answer: iptables 1.2.9 is broken with respect to iptables-save
and the connection tracking match extension. You must patch your
2004-08-17 00:17:09 +02:00
iptables using the patch available from the <ulink
url="errata.htm">Shorewall errata page</ulink> .</para>
2004-05-09 00:31:54 +02:00
</section>
2004-03-17 16:03:46 +01:00
</section>
2004-10-31 17:47:31 +01:00
<section id= "faq41" >
<title > (FAQ 41) Why do I get modprobe failure messages when I start
Shorewall?</title>
<para > When I start shorewall I got the following errors.</para>
<programlisting > Oct 30 11:13:12 fwr modprobe: modprobe: Can't locate module ipt_conntrack
Oct 30 11:13:17 fwr modprobe: modprobe: Can't locate module ipt_pkttype
Oct 30 11:13:18 fwr modprobe: modprobe: Can't locate module ipt_pkttype
Oct 30 11:13:57 fwr last message repeated 2 times
Oct 30 11:14:06 fwr root: Shorewall Restarted</programlisting>
<para > The "shorewall status" output seems complying with my rules set.
Should I worry ? and is there any way to get rid of these errors
?</para>
<para > <emphasis role= "bold" > Answer</emphasis> : You are seeing two
different things:</para>
<orderedlist >
<listitem >
<para > The normal checking that Shorewall does when it starts.
Shorewall tries to determine the the capabilities of your 'iptables'
and kernel and then taylors the ruleset accordingly.</para>
</listitem>
<listitem >
<para > A problem in Shorewall 2.0.3a through 2.0.5 whereby Shorewall
tried to use the <emphasis > pkttype match</emphasis> feature each
time that it wanted to generate a rule involving broadcast or
multicast packets.</para>
</listitem>
</orderedlist>
<para > You can suppress the messages by aliasing the modules mentioned in
the error messages to off in /etc/modules.conf. Just be sure to review
these aliases each time that you do a kernel upgrade to be sure that you
are not disabling a feature in your new kernel that you want to
use.</para>
<programlisting > alias ipt_conntrack off
alias ipt_pkttype off</programlisting>
<para > For users who don't have the pkttype match feature in their
kernel, I also recommend upgrading to Shorewall 2.0.6 or later and then
setting PKTTYPE=No in shorewall.conf.</para>
</section>
2004-12-27 16:39:58 +01:00
<section >
<title > (FAQ 43) I just installed the Shorewall RPM and Shorewall doesn't
start at boot time.</title>
<para > <emphasis role= "bold" > Answer</emphasis> : When you install using
the "rpm -U" command, Shorewall doesn't run your distribution's tool for
configuring Shorewall startup. You will need to run that tool (insserv,
chkconfig, run-level editor, …) to configure Shorewall to start in the
run-levels that you run your firewall system at.</para>
</section>
2004-02-14 19:06:39 +01:00
</section>
<section >
<title > About Shorewall</title>
<section id= "faq10" >
<title > (FAQ 10) What Distributions does it work with?</title>
<para > Shorewall works with any GNU/Linux distribution that includes the
2004-08-17 00:17:09 +02:00
<ulink url= "shorewall_prerequisites.htm" > proper
prerequisites</ulink> .</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq11" >
<title > (FAQ 11) What Features does it have?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> See the <ulink
url="shorewall_features.htm">Shorewall Feature List</ulink> .</para>
</section>
<section id= "faq12" >
<title > (FAQ 12) Is there a GUI?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> Yes. Shorewall support is
included in Webmin 1.060 and later versions. See <ulink
url="http://www.webmin.com">http://www.webmin.com</ulink> </para>
</section>
<section id= "faq13" >
<title > (FAQ 13) Why do you call it <quote > Shorewall</quote> ?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> Shorewall is a
concatenation of <quote > <emphasis > Shore</emphasis> line</quote> (<ulink
url="http://www.cityofshoreline.com">the city where I live</ulink> ) and
<quote > Fire<emphasis > wall</emphasis> </quote> . The full name of the
product is actually <quote > Shoreline Firewall</quote> but
2004-12-05 00:37:19 +01:00
<quote > Shorewall</quote> is much more commonly used.</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq23" >
<title > (FAQ 23) Why do you use such ugly fonts on your web site?</title>
2004-08-17 00:17:09 +02:00
<para > The Shorewall web site is almost font neutral (it doesn't
2004-02-14 19:06:39 +01:00
explicitly specify fonts except on a few pages) so the fonts you see are
2004-08-17 00:17:09 +02:00
largely the default fonts configured in your browser. If you don't like
them then reconfigure your browser.</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq25" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 25) How to I tell which version of Shorewall I am
running?</title>
2004-02-14 19:06:39 +01:00
<para > At the shell prompt, type:</para>
<programlisting > <command > /sbin/shorewall version</command> </programlisting>
</section>
<section id= "faq31" >
<title > (FAQ 31) Does Shorewall provide protection against....</title>
<variablelist >
<varlistentry >
<term > IP Spoofing: Sending packets over the WAN interface using an
internal LAP IP address as the source address?</term>
<listitem >
<para > Answer: Yes.</para>
</listitem>
</varlistentry>
<varlistentry >
2004-08-17 00:17:09 +02:00
<term > Tear Drop: Sending packets that contain overlapping
fragments?</term>
2004-02-14 19:06:39 +01:00
<listitem >
<para > Answer: This is the responsibility of the IP stack, not the
Netfilter-based firewall since fragment reassembly occurs before
the stateful packet filter ever touches each packet.</para>
</listitem>
</varlistentry>
<varlistentry >
<term > Smurf and Fraggle: Sending packets that use the WAN or LAN
broadcast address as the source address?</term>
<listitem >
<para > Answer: Shorewall can be configured to do that using the
<ulink url= "blacklisting_support.htm" > blacklisting</ulink>
2004-03-17 16:03:46 +01:00
facility. Shorewall versions 2.0.0 and later filter these packets
under the <firstterm > nosmurfs</firstterm> interface option in
2004-08-17 00:17:09 +02:00
<ulink
url="Documentation.htm#Interfaces">/etc/shorewall/interfaces</ulink> .</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > Land Attack: Sending packets that use the same address as the
source and destination address?</term>
<listitem >
<para > Answer: Yes, if the <ulink
2004-08-17 00:17:09 +02:00
url="Documentation.htm#Interfaces">routefilter interface
option</ulink> is selected.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
<varlistentry >
<term > DOS: - SYN Dos - ICMP Dos - Per-host Dos protection</term>
<listitem >
<para > Answer: Shorewall has facilities for limiting SYN and ICMP
2004-08-17 00:17:09 +02:00
packets. Netfilter as included in standard Linux kernels doesn't
support per-remote-host limiting except by explicit rule that
specifies the host IP address; that form of limiting is supported
by Shorewall.</para>
2004-02-14 19:06:39 +01:00
</listitem>
</varlistentry>
</variablelist>
</section>
<section >
<title > Given that the Debian Stable Release includes Shorewall 1.2.12,
how can you not support that version?</title>
<para > The first release of Shorewall was in March of 2001. Shorewall
2004-03-17 16:03:46 +01:00
1.2.12 was released in May of 2002. It is now the year 2004 and
Shorewall 2.0 is available. Shorewall 1.2.12 is poorly documented and is
missing many of the features that Shorewall users find essential today
and it is silly to continue to run it simply because it is bundled with
an ancient Debian release.</para>
2004-02-14 19:06:39 +01:00
</section>
2004-05-09 00:31:54 +02:00
<section id= "faq36" >
<title > (FAQ 36) Does Shorewall Work with the 2.6 Linux Kernel?</title>
2004-08-17 00:17:09 +02:00
<para > Shorewall works with the 2.6 Kernels with a couple of
caveats:</para>
2004-05-09 00:31:54 +02:00
<itemizedlist >
<listitem >
2004-08-17 00:17:09 +02:00
<para > Netfilter/iptables doesn't fully support IPSEC in the 2.6
2004-12-05 00:37:19 +01:00
Kernels -- kernel and iptables patches are available and the details
2005-02-13 03:05:38 +01:00
may be found at the <ulink url= "IPSEC-2.6.html" > Shorewall IPSEC-2.6
2004-12-05 00:37:19 +01:00
page</ulink> .</para>
2004-05-09 00:31:54 +02:00
</listitem>
<listitem >
<para > The 2.6 Kernels do not provide support for the logunclean and
2004-08-17 00:17:09 +02:00
dropunclean options in
<filename > /etc/shorewall/interfaces</filename> . Note that support
for those options was also removed from Shorewall in version
2.0.0.</para>
2004-05-09 00:31:54 +02:00
</listitem>
</itemizedlist>
</section>
2004-02-14 19:06:39 +01:00
</section>
<section >
<title > RFC 1918</title>
<section id= "faq14" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 14) I'm connected via a cable modem and it has an internal
web server that allows me to configure/monitor it but as expected if I
enable rfc1918 blocking for my eth0 interface (the internet one), it
also blocks the cable modems web server.</title>
2004-02-14 19:06:39 +01:00
<para > Is there any way it can add a rule before the rfc1918 blocking
that will let all traffic to and from the 192.168.100.1 address of the
modem in/out but still block all other rfc1918 addresses?</para>
<para > <emphasis role= "bold" > Answer:</emphasis> If you are running a
version of Shorewall earlier than 1.3.1, create /etc/shorewall/start and
in it, place the following:</para>
<programlisting > <command > run_iptables -I rfc1918 -s 192.168.100.1 -j ACCEPT</command> </programlisting>
2004-03-17 16:03:46 +01:00
<para > If you are running version 1.3.1 or later, add the following to
<ulink url= "Documentation.htm#rfc1918" > /etc/shorewall/rfc1918</ulink>
(Note: If you are running Shorewall 2.0.0 or later, you may need to
first copy <filename > /usr/share/shorewall/rfc1918</filename> to
<filename > /etc/shorewall/rfc1918</filename> ):</para>
2004-02-14 19:06:39 +01:00
2004-08-17 00:17:09 +02:00
<para > Be sure that you add the entry ABOVE the entry for
192.168.0.0/16.</para>
2004-02-14 19:06:39 +01:00
<programlisting > #SUBNET TARGET
192.168.100.1 RETURN</programlisting>
<note >
<para > If you add a second IP address to your external firewall
interface to correspond to the modem address, you must also make an
entry in /etc/shorewall/rfc1918 for that address. For example, if you
configure the address 192.168.100.2 on your firewall, then you would
add two entries to /etc/shorewall/rfc1918:</para>
<programlisting > #SUBNET TARGET
192.168.100.1 RETURN
192.168.100.2 RETURN</programlisting>
</note>
<section id= "faq14a" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 14a) Even though it assigns public IP addresses, my ISP's
DHCP server has an RFC 1918 address. If I enable RFC 1918 filtering on
my external interface, my DHCP client cannot renew its lease.</title>
2004-02-14 19:06:39 +01:00
<para > The solution is the same as <xref linkend= "faq14" /> above.
Simply substitute the IP address of your ISPs DHCP server.</para>
</section>
2005-03-01 21:20:26 +01:00
2005-03-01 21:23:40 +01:00
<section id= "faq14b" >
2005-03-01 21:20:26 +01:00
<title > (FAQ 14b) I connect to the internet with PPPoE. When I try to
access the built-in web server in my DSL Modem, I get connection
Refused.</title>
<para > I see the following in my log:</para>
<programlisting > Mar 1 18:20:07 Mail kernel: Shorewall:OUTPUT:REJECT:IN= OUT=eth0 SRC=192.168.1.2 DST=192.168.1.1 LEN=60
TOS=0x00 PREC=0x00 TTL=64 ID=26774 DF PROTO=TCP SPT=32797 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 </programlisting>
<para > Answer: The fact that the message is being logged from the
OUTPUT chain means that the destination IP address is not in any
defined zone (see <link linkend= "faq17" > FAQ 17</link> ). You need
to:</para>
<orderedlist >
<listitem >
2005-03-02 01:49:14 +01:00
<para > Add a zone for the modem in
<filename > /etc/shorewall/zones</filename> :</para>
2005-03-01 21:20:26 +01:00
<programlisting > #ZONE DISPLAY COMMENTS
modem ADSLModem Zone for modem</programlisting>
</listitem>
<listitem >
<para > Define the zone to be associated with <filename
class="devicefile">eth0</filename> (or whatever interface connects
2005-03-02 01:49:14 +01:00
to your modem) in
<filename > /etc/shorewall/interfaces</filename> :</para>
2005-03-01 21:20:26 +01:00
<programlisting > #ZONE INTERFACE BROADCAST OPTIONS
modem eth0 detect</programlisting>
</listitem>
<listitem >
<para > Allow web traffic to the modem in
2005-03-02 01:49:14 +01:00
<filename > /etc/shorewall/rules</filename> :</para>
2005-03-01 21:20:26 +01:00
<programlisting > #ACTION SOURCE DEST PROTO DEST PORT(S)
ACCEPT fw modem tcp 80
ACCEPT loc modem tcp 80</programlisting>
</listitem>
</orderedlist>
2005-03-02 01:49:14 +01:00
<para > Note that many of these ADSL/Cable Modems have no default
gateway or their default gateway is at a fixed IP address that is
different from the IP address you have assigned to your external
interface. In either case, you may have problems browsing the modem
from your local network even if you have the correct routes
established on your firewall. This is usually solved by masquerading
traffic from your local network to the modem.</para>
<para > <filename > /etc/shorewall/masq</filename> :</para>
<programlisting > #INTERFACE SUBNET ADDRESS
eth0 eth1 # eth1 = interface to local network</programlisting>
<para > For an example of this when the ADSL/Cable modem is bridged, see
<ulink url= "myfiles.htm" > my configuration</ulink> . In that case, I
masquerade using the IP address of my local interface!</para>
2005-03-01 21:20:26 +01:00
</section>
2004-02-14 19:06:39 +01:00
</section>
</section>
<section >
<title > Alias IP Addresses/Virtual Interfaces</title>
<section id= "faq18" >
<title > (FAQ 18) Is there any way to use aliased ip addresses with
Shorewall, and maintain separate rulesets for different IPs?</title>
<para > <emphasis role= "bold" > Answer:</emphasis> Yes. See <ulink
url="Shorewall_and_Aliased_Interfaces.html">Shorewall and Aliased
Interfaces</ulink> .</para>
</section>
</section>
<section >
<title > Miscellaneous</title>
<section id= "faq19" >
<title > (FAQ 19) I have added entries to /etc/shorewall/tcrules but they
2004-08-17 00:17:09 +02:00
don't seem to do anything. Why?</title>
2004-02-14 19:06:39 +01:00
2004-08-17 00:17:09 +02:00
<para > You probably haven't set TC_ENABLED=Yes in
2004-02-14 19:06:39 +01:00
/etc/shorewall/shorewall.conf so the contents of the tcrules file are
simply being ignored.</para>
</section>
<section id= "faq20" >
<title > (FAQ 20) I have just set up a server. Do I have to change
Shorewall to allow access to my server from the internet?</title>
2004-08-17 00:17:09 +02:00
<para > Yes. Consult the <ulink
url="shorewall_quickstart_guide.htm">QuickStart guide</ulink> that you
used during your initial setup for information about how to set up rules
for your server.</para>
2004-02-14 19:06:39 +01:00
</section>
<section id= "faq24" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 24) How can I allow conections to let's say the ssh port
2004-02-14 19:06:39 +01:00
only from specific IP Addresses on the internet?</title>
<para > In the SOURCE column of the rule, follow <quote > net</quote> by a
2004-08-17 00:17:09 +02:00
colon and a list of the host/subnet addresses as a comma-separated
list.</para>
2004-02-14 19:06:39 +01:00
2004-08-17 00:17:09 +02:00
<programlisting > net:< ip1> ,< ip2> ,...</programlisting>
2004-02-14 19:06:39 +01:00
<example >
<title > Example:</title>
<programlisting > ACCEPT net:192.0.2.16/28,192.0.2.44 fw tcp 22</programlisting>
</example>
</section>
<section id= "faq26" >
<title > (FAQ 26) When I try to use any of the SYN options in nmap on or
behind the firewall, I get <quote > operation not permitted</quote> . How
2004-08-17 00:17:09 +02:00
can I use nmap with Shorewall?"</title>
2004-02-14 19:06:39 +01:00
2004-08-17 00:17:09 +02:00
<para > Edit /etc/shorewall/shorewall.conf and change
<quote > NEWNOTSYN=No</quote> to <quote > NEWNOTSYN=Yes</quote> then restart
Shorewall.</para>
2004-02-14 19:06:39 +01:00
<section id= "faq26a" >
<title > (FAQ 26a) When I try to use the <quote > -O</quote> option of
2004-08-17 00:17:09 +02:00
nmap from the firewall system, I get <quote > operation not
permitted</quote> . How do I allow this option?</title>
2004-02-14 19:06:39 +01:00
<para > Add this command to your /etc/shorewall/start file:</para>
<programlisting > <command > run_iptables -D OUTPUT -p ! icmp -m state --state INVALID -j DROP</command> </programlisting>
</section>
</section>
<section id= "faq27" >
2004-08-17 00:17:09 +02:00
<title > (FAQ 27) I'm compiling a new kernel for my firewall. What should
I look out for?</title>
2004-02-14 19:06:39 +01:00
<para > First take a look at the <ulink url= "kernel.htm" > Shorewall kernel
configuration page</ulink> . You probably also want to be sure that you
have selected the <quote > <emphasis role= "bold" > NAT of local connections
(READ HELP)</emphasis> </quote> on the Netfilter Configuration menu.
2004-08-17 00:17:09 +02:00
Otherwise, DNAT rules with your firewall as the source zone won't work
with your new kernel.</para>
2004-02-14 19:06:39 +01:00
<section id= "faq27a" >
2004-08-19 20:29:13 +02:00
<title > (FAQ 27a) I just built (or downloaded or otherwise acquired)
and installed a new kernel and now Shorewall won't start. I know that
my kernel options are correct.</title>
2004-02-14 19:06:39 +01:00
<para > The last few lines of <ulink url= "troubleshoot.htm" > a startup
trace</ulink> are these:</para>
<programlisting > + run_iptables2 -t nat -A eth0_masq -s 192.168.2.0/24 -d 0.0.0.0/0 -j
MASQUERADE
2004-08-17 00:17:09 +02:00
+ '[' 'x-t nat -A eth0_masq -s 192.168.2.0/24 -d 0.0.0.0/0 -j
MASQUERADE' = 'x-t nat -A eth0_masq -s 192.168.2.0/24 -d 0.0.0.
0/0 -j MASQUERADE' ']'
2004-02-14 19:06:39 +01:00
+ run_iptables -t nat -A eth0_masq -s 192.168.2.0/24 -d 0.0.0.0/0 -j
MASQUERADE
+ iptables -t nat -A eth0_masq -s 192.168.2.0/24 -d 0.0.0.0/0 -j
MASQUERADE
iptables: Invalid argument
2004-08-17 00:17:09 +02:00
+ '[' -z '' ']'
2004-02-14 19:06:39 +01:00
+ stop_firewall
+ set +x</programlisting>
<para > <emphasis role= "bold" > Answer:</emphasis> Your new kernel
contains headers that are incompatible with the ones used to compile
your <command > iptables</command> utility. You need to rebuild
<command > iptables</command> using your new kernel source.</para>
</section>
</section>
<section id= "faq28" >
<title > (FAQ 28) How do I use Shorewall as a Bridging Firewall?</title>
2004-03-17 16:03:46 +01:00
<para > Experimental Shorewall Bridging Firewall support is available —
<ulink url= "bridge.html" > check here for details</ulink> .</para>
2004-02-14 19:06:39 +01:00
</section>
2004-10-02 16:49:34 +02:00
<section id= "faq39" >
<title > (FAQ 39) How do I block connections to a particular domain
name?</title>
<para > I tried this rule to block Google's Adsense that you'll find on
everyone's site. Adsense is a Javascript that people add to their Web
pages. So I entered the rule:</para>
<programlisting > #ACTION SOURCE DEST PROTO
REJECT fw net:pagead2.googlesyndication.com all</programlisting>
<para > However, this also sometimes restricts access to "google.com". Why
is that? Using dig, I found these IPs for domain
googlesyndication.com:<programlisting > 216.239.37.99
216.239.39.99</programlisting> And this for google.com:<programlisting > 216.239.37.99
216.239.39.99
216.239.57.99</programlisting> So my guess is that you are not actually
blocking the domain, but rather the IP being called. So how in the world
do you block an actual domain name?</para>
<para > <emphasis role= "bold" > Answer:</emphasis> Packet filters like
Netfilter base their decisions on the contents of the various protocol
headers at the front of each packet. Stateful packet filters (of which
Netfilter is an example) use a combination of header contents and state
created when the packet filter processed earlier packets. Netfilter (and
Shorewall's use of netfilter) also consider the network interface(s)
where each packet entered and/or where the packet will leave the
firewall/router.</para>
<para > When you specify <ulink
url="configuration_file_basics.htm#dnsnames">a domain name in a
Shorewall rule</ulink> , the iptables program resolves that name to one
or more IP addresses and the actual netfilter rules that are created are
expressed in terms of those IP addresses. So the rule that you entered
was equivalent to:</para>
<para > <programlisting > #ACTION SOURCE DEST PROTO
REJECT fw net:216.239.37.99 all
REJECT fw net:216.239.39.99 all</programlisting> Given that
name-based multiple hosting is a common practice (another example:
lists.shorewall.net and www1.shorewall.net are both hosted on the same
system with a single IP address), it is not possible to filter
connections to a particular name by examiniation of protocol headers
alone. While some protocols such as <ulink url= "FTP.html" > FTP</ulink>
require the firewall to examine and possibly modify packet payload,
parsing the payload of individual packets doesn't always work because
the application-level data stream can be split across packets in
arbitrary ways. This is one of the weaknesses of the 'string match'
Netfilter extension available in Patch-O-Matic. The only sure way to
filter on packet content is to proxy the connections in question -- in
the case of HTTP, this means running something like <ulink
url="Shorewall_Squid_Usage.html">Squid</ulink> . Proxying allows the
proxy process to assemble complete application-level messages which can
then be accurately parsed and decisions can be made based on the
result.</para>
</section>
2004-11-19 18:58:59 +01:00
<section id= "faq42" >
<title > (FAQ 42) How can I tell which features my kernel and iptables
support?</title>
<para > Answer: At a root prompt, enter the command <command > shorewall
check</command> . There is a section near the top of the resulting output
that gives you a synopsis of your kernel/iptables capabilities.</para>
<programlisting > gateway:/etc/shorewall # shorewall check
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Notice: The 'check' command is unsupported and problem
reports complaining about errors that it didn't catch
will not be accepted
Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Connection Tracking Match: Available
Packet Type Match: Not available
Policy Match: Available
Physdev Match: Available
IP range Match: Available
Verifying Configuration...
...</programlisting>
</section>
2004-02-14 19:06:39 +01:00
</section>
<appendix >
<title > Revision History</title>
2004-08-17 00:17:09 +02:00
<para > <revhistory >
2005-03-01 21:20:26 +01:00
<revision >
<revnumber > 1.43</revnumber>
<date > 2005-03-01</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 14b.</revremark>
</revision>
2004-12-31 19:19:12 +01:00
<revision >
<revnumber > 1.42</revnumber>
<date > 2004-12-31</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 44.</revremark>
</revision>
2004-12-23 23:28:58 +01:00
<revision >
2004-12-27 16:39:58 +01:00
<revnumber > 1.41</revnumber>
<date > 2004-12-26</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 43.</revremark>
</revision>
<revision >
<revnumber > 1.40</revnumber>
2004-12-23 23:28:58 +01:00
<date > 2004-12-22</date>
<authorinitials > TE</authorinitials>
<revremark > Correct action directory name if FAQ 4.</revremark>
</revision>
2004-12-18 18:08:10 +01:00
<revision >
<revnumber > 1.39</revnumber>
<date > 2004-12-12</date>
<authorinitials > TE</authorinitials>
<revremark > Updated Debian information. Revised the answer to FAQ
2a.</revremark>
</revision>
2004-11-19 18:58:59 +01:00
<revision >
<revnumber > 1.38</revnumber>
<date > 2004-11-18</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 42.</revremark>
</revision>
2004-11-09 22:55:11 +01:00
<revision >
<revnumber > 1.37</revnumber>
<date > 2004-11-05</date>
<authorinitials > TE</authorinitials>
<revremark > Added second title to FAQ 17.</revremark>
</revision>
<revision >
<revnumber > 1.36</revnumber>
<date > 2004-11-04</date>
<authorinitials > TE</authorinitials>
<revremark > Add note about Gnome Terminal.</revremark>
</revision>
2004-10-31 17:47:31 +01:00
<revision >
<revnumber > 1.35</revnumber>
<date > 2004-10-30</date>
<authorinitials > TE</authorinitials>
<revremark > Add FAQ 41.</revremark>
</revision>
2004-10-14 21:20:17 +02:00
<revision >
<revnumber > 1.34</revnumber>
<date > 2004-10-12</date>
<authorinitials > TE</authorinitials>
<revremark > Add FAQ 40.</revremark>
</revision>
2004-10-02 16:49:34 +02:00
<revision >
<revnumber > 1.33</revnumber>
<date > 2004-10-01</date>
<authorinitials > TE</authorinitials>
<revremark > Add FAQ 39.</revremark>
</revision>
2004-09-24 00:50:12 +02:00
<revision >
<revnumber > 1.32</revnumber>
<date > 2004-09-23</date>
<authorinitials > TE</authorinitials>
<revremark > Add link to simple bridge documentation from FAQ
35.</revremark>
</revision>
<revision >
<revnumber > 1.31</revnumber>
<date > 2004-09-12</date>
<authorinitials > TE</authorinitials>
<revremark > Rename FAQ 17.</revremark>
</revision>
2004-09-04 20:57:53 +02:00
<revision >
<revnumber > 1.30</revnumber>
<date > 2004-08-26</date>
<authorinitials > TE</authorinitials>
<revremark > Update FAQ 2 with information about Shorewall
2.1.</revremark>
</revision>
2004-08-19 20:29:13 +02:00
<revision >
<revnumber > 1.29</revnumber>
<date > 2004-08-19</date>
<authorinitials > TE</authorinitials>
<revremark > Reword FAQ 27a to include downloaded kernels.</revremark>
</revision>
2004-08-17 00:17:09 +02:00
<revision >
<revnumber > 1.28</revnumber>
<date > 2004-07-14</date>
<authorinitials > TE</authorinitials>
<revremark > Insert link to Ian Allen's DNAT paper (FAQ
38)</revremark>
</revision>
<revision >
<revnumber > 1.27</revnumber>
<date > 2004-06-18</date>
<authorinitials > TE</authorinitials>
<revremark > Correct formatting in H323 quote.</revremark>
</revision>
<revision >
<revnumber > 1.26</revnumber>
<date > 2004-05-18</date>
<authorinitials > TE</authorinitials>
<revremark > Delete obsolete ping information.</revremark>
</revision>
<revision >
<revnumber > 1.25</revnumber>
<date > 2004-05-18</date>
<authorinitials > TE</authorinitials>
<revremark > Empty /etc/shorewall on Debian.</revremark>
</revision>
<revision >
<revnumber > 1.25</revnumber>
<date > 2004-05-08</date>
<authorinitials > TE</authorinitials>
<revremark > Update for Shorewall 2.0.2</revremark>
</revision>
<revision >
<revnumber > 1.24</revnumber>
<date > 2004-04-25</date>
<authorinitials > TE</authorinitials>
<revremark > Add MA Brown's notes on multi-ISP routing.</revremark>
</revision>
<revision >
<revnumber > 1.23</revnumber>
<date > 2004-04-22</date>
<authorinitials > TE</authorinitials>
<revremark > Refined SNAT rule in FAQ #2.</revremark>
</revision>
<revision >
<revnumber > 1.22</revnumber>
<date > 2004-04-06</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 36.</revremark>
</revision>
<revision >
<revnumber > 1.21</revnumber>
<date > 2004-03-05</date>
<authorinitials > TE</authorinitials>
<revremark > Added Bridging link.</revremark>
</revision>
<revision >
<revnumber > 1.20</revnumber>
<date > 2004-02-27</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 35.</revremark>
</revision>
<revision >
<revnumber > 1.19</revnumber>
<date > 2004-02-22</date>
<authorinitials > TE</authorinitials>
<revremark > Added mention of nosmurfs option under FAQ
31.</revremark>
</revision>
<revision >
<revnumber > 1.18</revnumber>
<date > 2004-02-15</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 34.</revremark>
</revision>
<revision >
<revnumber > 1.17</revnumber>
<date > 2004-02-11</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 33.</revremark>
</revision>
<revision >
<revnumber > 1.16</revnumber>
<date > 2004-02-03</date>
<authorinitials > TE</authorinitials>
<revremark > Updated for Shorewall 2.0.</revremark>
</revision>
<revision >
<revnumber > 1.15</revnumber>
<date > 2004-01-25</date>
<authorinitials > TE</authorinitials>
<revremark > Updated FAQ 32 to mention masquerading. Remove
tables.</revremark>
</revision>
<revision >
<revnumber > 1.14</revnumber>
<date > 2004-01-24</date>
<authorinitials > TE</authorinitials>
<revremark > Added FAQ 27a regarding kernel/iptables
incompatibility.</revremark>
</revision>
<revision >
<revnumber > 1.13</revnumber>
<date > 2004-01-24</date>
<authorinitials > TE</authorinitials>
<revremark > Add a note about the <emphasis
role="bold">detectnets</emphasis> interface option in FAQ
9.</revremark>
</revision>
<revision >
<revnumber > 1.12</revnumber>
<date > 2004-01-20</date>
<authorinitials > TE</authorinitials>
<revremark > Improve FAQ 16 answer.</revremark>
</revision>
<revision >
<revnumber > 1.11</revnumber>
<date > 2004-01-14</date>
<authorinitials > TE</authorinitials>
<revremark > Corrected broken link</revremark>
</revision>
<revision >
<revnumber > 1.10</revnumber>
<date > 2004-01-09</date>
<authorinitials > TE</authorinitials>
<revremark > Added a couple of more legacy FAQ numbers.</revremark>
</revision>
<revision >
<revnumber > 1.9</revnumber>
<date > 2004-01-08</date>
<authorinitials > TE</authorinitials>
<revremark > Corrected typo in FAQ 26a. Added warning to FAQ 2
regarding source address of redirected requests.</revremark>
</revision>
<revision >
<revnumber > 1.8</revnumber>
<date > 2003-12-31</date>
<authorinitials > TE</authorinitials>
<revremark > Additions to FAQ 4.</revremark>
</revision>
<revision >
<revnumber > 1.7</revnumber>
<date > 2003-12-30</date>
<authorinitials > TE</authorinitials>
<revremark > Remove dead link from FAQ 1.</revremark>
</revision>
<revision >
<revnumber > 1.6</revnumber>
<date > 2003.12-18</date>
<authorinitials > TE</authorinitials>
<revremark > Add external link reference to FAQ 17.</revremark>
</revision>
<revision >
<revnumber > 1.5</revnumber>
<date > 2003-12-16</date>
<authorinitials > TE</authorinitials>
<revremark > Added a link to a Sys Admin article about multiple
internet interfaces. Added Legal Notice. Moved "abstract" to the
body of the document. Moved Revision History to this
Appendix.</revremark>
</revision>
<revision >
<revnumber > 1.4</revnumber>
<date > 2003-12-13</date>
<authorinitials > TE</authorinitials>
<revremark > Corrected formatting problems</revremark>
</revision>
<revision >
<revnumber > 1.3</revnumber>
<date > 2003-12-10</date>
<authorinitials > TE</authorinitials>
<revremark > Changed the title of FAQ 17</revremark>
</revision>
<revision >
<revnumber > 1.2</revnumber>
<date > 2003-12-09</date>
<authorinitials > TE</authorinitials>
<revremark > Added Copyright and legacy FAQ numbers</revremark>
</revision>
<revision >
<revnumber > 1.1</revnumber>
<date > 2003-12-04</date>
<authorinitials > MN</authorinitials>
<revremark > Converted to Simplified DocBook XML</revremark>
</revision>
<revision >
<revnumber > 1.0</revnumber>
<date > 2002-08-13</date>
<authorinitials > TE</authorinitials>
<revremark > Initial revision</revremark>
</revision>
</revhistory> </para>
2004-02-14 19:06:39 +01:00
</appendix>
</article>
