shorewall_code/manpages/shorewall-tunnels.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall-tunnels</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>tunnels</refname>

    <refpurpose>Shorewall VPN definition file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/tunnels</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The tunnels file is used to define rules for encapsulated (usually
    encrypted) traffic to pass between the Shorewall system and a remote
    gateway. Traffic flowing through the tunnel is handled using the normal
    zone/policy/rule mechanism. See <ulink
    url="http://www.shorewall.net/VPNBasics.html">http://www.shorewall.net/VPNBasics.html</ulink>
    for details.</para>

    <para>The columns in the file are as follows.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">TYPE</emphasis> - {<emphasis
        role="bold">ipsec</emphasis>[<emphasis
        role="bold">:{noah</emphasis>|ah}]|<emphasis
        role="bold">ipsecnat</emphasis>|<emphasis
        role="bold">ipip</emphasis>|<emphasis
        role="bold">gre</emphasis>|l2tp|<emphasis
        role="bold">pptpclient</emphasis>|<emphasis
        role="bold">pptpserver</emphasis>|COMMENT|{<emphasis
        role="bold">openvpn</emphasis>|<emphasis
        role="bold">openvpnclient</emphasis>|<emphasis
        role="bold">openvpnserver</emphasis>}[:{<emphasis
        role="bold">tcp</emphasis>|<emphasis
        role="bold">udp</emphasis>}]<emphasis
        role="bold">[</emphasis>:<emphasis>port</emphasis>]|<emphasis
        role="bold">generic</emphasis><emphasis
        role="bold">:</emphasis><emphasis>protocol</emphasis>[<emphasis
        role="bold">:</emphasis><emphasis>port</emphasis>]}</term>

        <listitem>
          <para>Types are as follows:</para>

          <programlisting>        <emphasis role="bold">6to4</emphasis>          - 6to4 or 6in4 tunnel         
        <emphasis role="bold">ipsec</emphasis>         - IPv4 IPSEC
        <emphasis role="bold">ipsecnat</emphasis>      - IPv4 IPSEC with NAT Traversal (UDP port 4500 encapsulation)
        <emphasis role="bold">ipip</emphasis>          - IPv4 encapsulated in IPv4 (Protocol 4)
        <emphasis role="bold">gre</emphasis>           - Generalized Routing Encapsulation (Protocol 47)
        <emphasis role="bold">l2tp</emphasis>          - Layer 2 Tunneling Protocol (UDP port 1701)
        <emphasis role="bold">pptpclient</emphasis>    - PPTP Client runs on the firewall
        <emphasis role="bold">pptpserver</emphasis>    - PPTP Server runs on the firewall
        <emphasis role="bold">openvpn</emphasis>       - OpenVPN in point-to-point mode
        <emphasis role="bold">openvpnclient</emphasis> - OpenVPN client runs on the firewall
        <emphasis role="bold">openvpnserver</emphasis> - OpenVPN server runs on the firewall
        <emphasis role="bold">generic</emphasis>       - Other tunnel type</programlisting>

          <para>If the type is <emphasis role="bold">ipsec</emphasis>, it may
          be followed by <emphasis role="bold">:ah</emphasis> to indicate that
          the Authentication Headers protocol (51) is used by the tunnel (the
          default is <option>:noah</option> which means that protocol 51 is
          not used). NAT traversal is only supported with ESP (protocol 50) so
          <emphasis role="bold">ipsecnat</emphasis> tunnels don't allow the
          <emphasis role="bold">ah</emphasis> option (<emphasis
          role="bold">ipsecnat:noah</emphasis> may be specified but is
          redundant).</para>

          <para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
          role="bold">openvpnclient</emphasis> or <emphasis
          role="bold">openvpnserver</emphasis> it may optionally be followed
          by ":" and <emphasis role="bold">tcp</emphasis> or <emphasis
          role="bold">udp</emphasis> to specify the protocol to be used. If
          not specified, <emphasis role="bold">udp</emphasis> is
          assumed.</para>

          <para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
          role="bold">openvpnclient</emphasis> or <emphasis
          role="bold">openvpnserver</emphasis> it may optionally be followed
          by ":" and the port number used by the tunnel. if no ":" and port
          number are included, then the default port of 1194 will be used. .
          Where both the protocol and port are specified, the protocol must be
          given first (e.g., openvpn:tcp:4444).</para>

          <para>If type is <emphasis role="bold">generic</emphasis>, it must
          be followed by ":" and a protocol name (from /etc/protocols) or a
          protocol number. If the protocol is <emphasis
          role="bold">tcp</emphasis> or <emphasis role="bold">udp</emphasis>
          (6 or 17), then it may optionally be followed by ":" and a port
          number.</para>

          <para>Comments may be attached to Netfilter rules generated from
          entries in this file through the use of COMMENT lines. These lines
          begin with the word COMMENT; the remainder of the line is treated as
          a comment which is attached to subsequent rules until another
          COMMENT line is found or until the end of the file is reached. To
          stop adding comments to rules, use a line with only the word
          COMMENT.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term></term>

        <listitem>
          <para></para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ZONE</emphasis> -
        <emphasis>zone</emphasis></term>

        <listitem>
          <para>The <emphasis>zone</emphasis> of the physical interface
          through which tunnel traffic passes. This is normally your internet
          zone.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">GATEWAY</emphasis> -
        <emphasis>address-or-range</emphasis></term>

        <listitem>
          <para>The IP address of the remote tunnel gateway. If the remote
          gateway has no fixed address (Road Warrior) then specify the gateway
          as <emphasis role="bold">0.0.0.0/0</emphasis>. May be specified as a
          network address and if your kernel and iptables include iprange
          match support then IP address ranges are also allowed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">GATEWAY ZONES</emphasis> (Optional) -
        [<emphasis>zone</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>zone</emphasis>]...]</term>

        <listitem>
          <para>If the gateway system specified in the third column is a
          standalone host then this column should contain a comma-separated
          list of the names of the zones that the host might be in. This
          column only applies to IPSEC tunnels where it enables ISAKMP traffic
          to flow through the tunnel to the remote gateway.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Example</title>

    <variablelist>
      <varlistentry>
        <term>Example 1:</term>

        <listitem>
          <para>IPSec tunnel.</para>

          <para>The remote gateway is 4.33.99.124 and the remote subnet is
          192.168.9.0/24. The tunnel does not use the AH protocol</para>

          <programlisting>        #TYPE           ZONE    GATEWAY
        ipsec:noah      net     4.33.99.124</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 2:</term>

        <listitem>
          <para>Road Warrior (LapTop that may connect from anywhere) where the
          "gw" zone is used to represent the remote LapTop</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        ipsec           net     0.0.0.0/0       gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 3:</term>

        <listitem>
          <para>Host 4.33.99.124 is a standalone system connected via an ipsec
          tunnel to the firewall system. The host is in zone gw.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        ipsec           net     4.33.99.124     gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 4:</term>

        <listitem>
          <para>Road Warriors that may belong to zones vpn1, vpn2 or vpn3. The
          FreeS/Wan _updown script will add the host to the appropriate zone
          using the <command>shorewall add</command> command on connect and
          will remove the host from the zone at disconnect time.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        ipsec           net     0.0.0.0/0       vpn1,vpn2,vpn3</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 5:</term>

        <listitem>
          <para>You run the Linux PPTP client on your firewall and connect to
          server 192.0.2.221.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        pptpclient      net     192.0.2.221</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 6:</term>

        <listitem>
          <para>You run a PPTP server on your firewall.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        pptpserver      net     0.0.0.0/0</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 7:</term>

        <listitem>
          <para>OPENVPN tunnel. The remote gateway is 4.33.99.124 and openvpn
          uses port 7777.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        openvpn:7777    net     4.33.99.124</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 8:</term>

        <listitem>
          <para>You have a tunnel that is not one of the supported types. Your
          tunnel uses UDP port 4444. The other end of the tunnel is
          4.3.99.124.</para>

          <programlisting>        #TYPE            ZONE    GATEWAY         GATEWAY ZONES
        generic:udp:4444 net     4.3.99.124</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/tunnels</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5),
    shorewall-ipsec(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-route_rules(5), shorewall-routestopped(5), shorewall-rules(5),
    shorewall.conf(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
    shorewall-tcrules(5), shorewall-tos(5), shorewall-zones(5)</para>
  </refsect1>
</refentry>