shorewall_code/Shorewall-docs/configuration_file_basics.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Configuration Files</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate>2003-11-20</pubdate>

    <copyright>
      <year>2001-2003</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <caution>
    <para>If you copy or edit your configuration files on a system running
    Microsoft Windows, you must run them through <ulink
    url="http://www.megaloman.com/~hany/software/hd2u/">dos2unix</ulink>
    before you use them with Shorewall.</para>
  </caution>

  <section id="Files">
    <title>Files</title>

    <para><itemizedlist><listitem><para>/etc/shorewall/shorewall.conf - used
    to set several firewall parameters.</para></listitem><listitem><para>/etc/shorewall/params
    - use this file to set shell variables that you will expand in other
    files.</para></listitem><listitem><para>/etc/shorewall/zones - partition
    the firewall&#39;s view of the world into zones.</para></listitem><listitem><para>/etc/shorewall/policy
    - establishes firewall high-level policy.</para></listitem><listitem><para>/etc/shorewall/interfaces
    - describes the interfaces on the firewall system.</para></listitem><listitem><para>/etc/shorewall/hosts
    - allows defining zones in terms of individual hosts and subnetworks.</para></listitem><listitem><para>/etc/shorewall/masq
    - directs the firewall where to use many-to-one (dynamic) Network Address
    Translation (a.k.a. Masquerading) and Source Network Address Translation
    (SNAT).</para></listitem><listitem><para>/etc/shorewall/modules - directs
    the firewall to load kernel modules.</para></listitem><listitem><para>/etc/shorewall/rules
    - defines rules that are exceptions to the overall policies established in
    /etc/shorewall/policy.</para></listitem><listitem><para>/etc/shorewall/nat
    - defines one-to-one NAT rules.</para></listitem><listitem><para>/etc/shorewall/proxyarp
    - defines use of Proxy ARP.</para></listitem><listitem><para>/etc/shorewall/routestopped
    (Shorewall 1.3.4 and later) - defines hosts accessible when Shorewall is
    stopped.</para></listitem><listitem><para>/etc/shorewall/tcrules - defines
    marking of packets for later use by traffic control/shaping or policy
    routing.</para></listitem><listitem><para>/etc/shorewall/tos - defines
    rules for setting the TOS field in packet headers.</para></listitem><listitem><para>/etc/shorewall/tunnels
    - defines IPSEC, GRE and IPIP tunnels with end-points on the firewall
    system.</para></listitem><listitem><para>/etc/shorewall/blacklist - lists
    blacklisted IP/subnet/MAC addresses.</para></listitem><listitem><para>/etc/shorewall/init
    - commands that you wish to execute at the beginning of a <quote>shorewall
    start</quote> or <quote>shorewall restart</quote>.</para></listitem><listitem><para>/etc/shorewall/start
    - commands that you wish to execute at the completion of a <quote>shorewall
    start</quote> or <quote>shorewall restart</quote></para></listitem><listitem><para>/etc/shorewall/stop
    - commands that you wish to execute at the beginning of a <quote>shorewall
    stop</quote>.</para></listitem><listitem><para>/etc/shorewall/stopped -
    commands that you wish to execute at the completion of a <quote>shorewall
    stop</quote>.</para></listitem><listitem><para>/etc/shorewall/ecn -
    disable Explicit Congestion Notification (ECN - RFC 3168) to remote hosts
    or networks.</para></listitem><listitem><para>/etc/shorewall/accounting -
    define IP traffic accounting rules</para></listitem><listitem><para>/etc/shorewall/usersets
    and /etc/shorewall/users - define sets of users/groups with similar access
    rights</para></listitem><listitem><para>/etc/shorewall/actions and
    /etc/shorewall/action.template - define your own actions for rules in
    /etc/shorewall/rules (shorewall 1.4.9 and later).</para></listitem></itemizedlist></para>
  </section>

  <section id="Comments">
    <title>Comments</title>

    <para>You may place comments in configuration files by making the first
    non-whitespace character a pound sign (<quote>#</quote>). You may also
    place comments at the end of any line, again by delimiting the comment
    from the rest of the line with a pound sign.</para>

    <example>
      <title>Comments in a Configuration File</title>

      <programlisting># This is a comment
ACCEPT  net     fw      tcp     www     #This is an end-of-line comment</programlisting>
    </example>
  </section>

  <section id="Continuation">
    <title>Line Continuation</title>

    <para>You may continue lines in the configuration files using the usual
    backslash (<quote>\</quote>) followed immediately by a new line character.</para>

    <example>
      <title>Line Continuation</title>

      <programlisting>ACCEPT  net     fw      tcp \
smtp,www,pop3,imap  #Services running on the firewall</programlisting>
    </example>
  </section>

  <section id="INCLUDE">
    <title>INCLUDE Directive</title>

    <para>Beginning with Shorewall version 1.4.2, any file may contain INCLUDE
    directives. An INCLUDE directive consists of the word INCLUDE followed by
    a file name and causes the contents of the named file to be logically
    included into the file containing the INCLUDE. File names given in an
    INCLUDE directive are assumed to reside in /etc/shorewall or in an
    alternate configuration directory if one has been specified for the
    command.</para>

    <para>INCLUDE&#39;s may be nested to a level of 3 -- further nested
    INCLUDE directives are ignored with a warning message.</para>

    <example>
      <title>Use of INCLUDE</title>

      <programlisting>     shorewall/params.mgmt:
 
&#x00A0;&#x00A0;      MGMT_SERVERS=1.1.1.1,2.2.2.2,3.3.3.3
 &#x00A0;&#x00A0;      TIME_SERVERS=4.4.4.4
 &#x00A0;&#x00A0;      BACKUP_SERVERS=5.5.5.5
 
&#x00A0;&#x00A0;      ----- end params.mgmt -----
 
&#x00A0;&#x00A0;   shorewall/params:
 
&#x00A0;&#x00A0;      # Shorewall 1.3 /etc/shorewall/params
 &#x00A0;&#x00A0;      [..]
 &#x00A0;&#x00A0;      #######################################
 &#x00A0;
 &#x00A0;&#x00A0;      INCLUDE params.mgmt&#x00A0;&#x00A0;&#x00A0; 
 &#x00A0; 
 &#x00A0;&#x00A0;    # params unique to this host here
 &#x00A0;&#x00A0;    #LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE
 
&#x00A0;&#x00A0;     ----- end params -----
 
&#x00A0;&#x00A0;   shorewall/rules.mgmt:
 
&#x00A0;&#x00A0;     ACCEPT net:$MGMT_SERVERS&#x00A0;&#x00A0;&#x00A0;$FW&#x00A0;&#x00A0;&#x00A0;               tcp&#x00A0;&#x00A0;&#x00A0; 22
 &#x00A0;&#x00A0;    ACCEPT $FW&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;        net:$TIME_SERVERS&#x00A0;&#x00A0;&#x00A0; udp&#x00A0;&#x00A0;&#x00A0; 123
 &#x00A0;&#x00A0;    ACCEPT $FW&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;&#x00A0;        net:$BACKUP_SERVERS&#x00A0; tcp&#x00A0;&#x00A0;&#x00A0; 22
 
&#x00A0;&#x00A0;    ----- end rules.mgmt -----
 
&#x00A0;&#x00A0;   shorewall/rules:
 
&#x00A0;&#x00A0;    # Shorewall version 1.3 - Rules File
 &#x00A0;&#x00A0;    [..]
 &#x00A0;&#x00A0;    #######################################
 &#x00A0;
 &#x00A0;&#x00A0;    INCLUDE rules.mgmt&#x00A0;&#x00A0;&#x00A0;&#x00A0; 
 &#x00A0; 
 &#x00A0;&#x00A0;    # rules unique to this host here
 &#x00A0;&#x00A0;    #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
 
&#x00A0;&#x00A0;   ----- end rules -----</programlisting>
    </example>
  </section>

  <section id="dnsnames">
    <title>Using DNS Names</title>

    <caution>
      <para>I personally recommend strongly against using DNS names in
      Shorewall configuration files. If you use DNS names and you are called
      out of bed at 2:00AM because Shorewall won&#39;t start as a result of
      DNS problems then don&#39;t say that you were not forewarned.</para>
    </caution>

    <para>Beginning with Shorewall 1.3.9, Host addresses in Shorewall
    configuration files may be specified as either IP addresses or DNS Names.</para>

    <para>DNS names in iptables rules aren&#39;t nearly as useful as they
    first appear. When a DNS name appears in a rule, the iptables utility
    resolves the name to one or more IP addresses and inserts those addresses
    into the rule. So changes in the DNS-&#62;IP address relationship that
    occur after the firewall has started have absolutely no effect on the
    firewall&#39;s ruleset.</para>

    <para>If your firewall rules include DNS names then:</para>

    <itemizedlist>
      <listitem>
        <para>If your /etc/resolv.conf is wrong then your firewall won&#39;t
        start.</para>
      </listitem>

      <listitem>
        <para>If your /etc/nsswitch.conf is wrong then your firewall won&#39;t
        start.</para>
      </listitem>

      <listitem>
        <para>If your Name Server(s) is(are) down then your firewall won&#39;t
        start.</para>
      </listitem>

      <listitem>
        <para>If your startup scripts try to start your firewall before
        starting your DNS server then your firewall won&#39;t start.</para>
      </listitem>

      <listitem>
        <para>Factors totally outside your control (your ISP&#39;s router is
        down for example), can prevent your firewall from starting.</para>
      </listitem>

      <listitem>
        <para>You must bring up your network interfaces prior to starting your
        firewall.</para>
      </listitem>
    </itemizedlist>

    <para>Each DNS name much be fully qualified and include a minumum of two
    periods (although one may be trailing). This restriction is imposed by
    Shorewall to insure backward compatibility with existing configuration
    files.</para>

    <example>
      <title>Valid DNS Names</title>

      <itemizedlist>
        <listitem>
          <para>mail.shorewall.net</para>
        </listitem>

        <listitem>
          <para>shorewall.net. (note the trailing period).</para>
        </listitem>
      </itemizedlist>
    </example>

    <example>
      <title>Invalid DNS Names</title>

      <itemizedlist>
        <listitem>
          <para>mail (not fully qualified)</para>
        </listitem>

        <listitem>
          <para>shorewall.net (only one period)</para>
        </listitem>
      </itemizedlist>
    </example>

    <para>DNS names may not be used as:</para>

    <itemizedlist>
      <listitem>
        <para>The server address in a DNAT rule (/etc/shorewall/rules file)</para>
      </listitem>

      <listitem>
        <para>In the ADDRESS column of an entry in /etc/shorewall/masq.</para>
      </listitem>

      <listitem>
        <para>In the /etc/shorewall/nat file.</para>
      </listitem>
    </itemizedlist>

    <para>These restrictions are imposed by Netfilter and not by Shorewall.</para>
  </section>

  <section id="Compliment">
    <title>Complementing an Address or Subnet</title>

    <para>Where specifying an IP address, a subnet or an interface, you can
    precede the item with <quote>!</quote> to specify the complement of the
    item. For example, !192.168.1.4 means <quote>any host but 192.168.1.4</quote>.
    There must be no white space following the <quote>!</quote>.</para>
  </section>

  <section id="Lists">
    <title>Comma-separated Lists</title>

    <para>Comma-separated lists are allowed in a number of contexts within the
    configuration files. A comma separated list:</para>

    <itemizedlist>
      <listitem>
        <para>Must not have any embedded white space.<programlisting>     Valid:   routefilter,dhcp,norfc1918
     Invalid: routefilter,&#x00A0;&#x00A0;&#x00A0;&#x00A0; dhcp,&#x00A0;&#x00A0;&#x00A0;&#x00A0; norfc1818
</programlisting></para>
      </listitem>

      <listitem>
        <para>If you use line continuation to break a comma-separated list,
        the continuation line(s) must begin in column 1 (or there would be
        embedded white space)</para>
      </listitem>

      <listitem>
        <para>Entries in a comma-separated list may appear in any order.</para>
      </listitem>
    </itemizedlist>
  </section>

  <section id="Ports">
    <title>Port Numbers/Service Names</title>

    <para>Unless otherwise specified, when giving a port number you can use
    either an integer or a service name from /etc/services.</para>
  </section>

  <section id="Ranges">
    <title>Port Ranges</title>

    <para>If you need to specify a range of ports, the proper syntax is
    &#60;low port number&#62;:&#60;high port number&#62;. For example, if you
    want to forward the range of tcp ports 4000 through 4100 to local host
    192.168.1.3, the entry in /etc/shorewall/rules is:</para>

    <informaltable>
      <tgroup cols="7">
        <thead>
          <row>
            <entry align="center">ACTION</entry>

            <entry align="center">SOURCE</entry>

            <entry align="center">DESTINATION</entry>

            <entry align="center">PROTOCOL</entry>

            <entry align="center">PORT(S)</entry>

            <entry align="center">SOURCE PORT(S)</entry>

            <entry align="center">ORIGINAL DEST</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>DNAT</entry>

            <entry>net</entry>

            <entry>loc:192.168.1.3 tcp</entry>

            <entry>tcp</entry>

            <entry>4000:4100</entry>

            <entry></entry>

            <entry></entry>
          </row>
        </tbody>
      </tgroup>
    </informaltable>

    <para>If you omit the low port number, a value of zero is assumed; if you
    omit the high port number, a value of 65535 is assumed.</para>
  </section>

  <section id="Variables">
    <title>Using Shell Variables</title>

    <para>You may use the /etc/shorewall/params file to set shell variables
    that you can then use in some of the other configuration files.</para>

    <para>It is suggested that variable names begin with an upper case letter
    to distinguish them from variables used internally within the Shorewall
    programs</para>

    <example>
      <title>Using Shell Variables</title>

      <programlisting>&#x00A0;&#x00A0;&#x00A0; /etc/shorewall/params
 
        NET_IF=eth0
        NET_BCAST=130.252.100.255
        NET_OPTIONS=routefilter,norfc1918
 
&#x00A0;&#x00A0;&#x00A0; /etc/shorewall/interfaces record:

        net $NET_IF $NET_BCAST $NET_OPTIONS
 
&#x00A0;&#x00A0;&#x00A0; The result will be the same as if the record had been written
 
        net eth0 130.252.100.255 routefilter,norfc1918
 </programlisting>

      <para>Variables may be used anywhere in the other configuration files.</para>
    </example>
  </section>

  <section id="MAC">
    <title>Using MAC Addresses</title>

    <para>Media Access Control (MAC) addresses can be used to specify packet
    source in several of the configuration files. To use this feature, your
    kernel must have MAC Address Match support (CONFIG_IP_NF_MATCH_MAC)
    included.</para>

    <para>MAC addresses are 48 bits wide and each Ethernet Controller has a
    unique MAC address.</para>

    <para>In GNU/Linux, MAC addresses are usually written as a series of 6 hex
    numbers separated by colons.</para>

    <example>
      <title>MAC Address of a NIC</title>

      <programlisting> &#x00A0;&#x00A0;&#x00A0;&#x00A0; [root@gateway root]# ifconfig eth0
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; eth0 Link encap:Ethernet HWaddr <emphasis
role="bold">02:00:08:E3:FA:55</emphasis>
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; inet addr:206.124.146.176 Bcast:206.124.146.255 Mask:255.255.255.0
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; RX packets:2398102 errors:0 dropped:0 overruns:0 frame:0
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; TX packets:3044698 errors:0 dropped:0 overruns:0 carrier:0
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; collisions:30394 txqueuelen:100
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; RX bytes:419871805 (400.4 Mb) TX bytes:1659782221 (1582.8 Mb)
 &#x00A0;&#x00A0;&#x00A0;&#x00A0; Interrupt:11 Base address:0x1800
</programlisting>
    </example>

    <para>Because Shorewall uses colons as a separator for address fields,
    Shorewall requires MAC addresses to be written in another way. In
    Shorewall, MAC addresses begin with a tilde (<quote>~</quote>) and consist
    of 6 hex numbers separated by hyphens. In Shorewall, the MAC address in
    the example above would be written <quote>~02-00-08-E3-FA-55</quote>.</para>

    <note>
      <para>It is not necessary to use the special Shorewall notation in the
      <ulink url="MAC_Validation.html">/etc/shorewall/maclist</ulink> file.</para>
    </note>
  </section>

  <section id="Levels">
    <title>Shorewall Configurations</title>

    <para>Shorewall allows you to have configuration directories other than
    /etc/shorewall. The shorewall check, start and restart commands allow you
    to specify an alternate configuration directory and Shorewall will use the
    files in the alternate directory rather than the corresponding files in
    /etc/shorewall. The alternate directory need not contain a complete
    configuration; those files not in the alternate directory will be read
    from /etc/shorewall.</para>

    <para>This facility permits you to easily create a test or temporary
    configuration by</para>

    <orderedlist>
      <listitem>
        <para>copying the files that need modification from /etc/shorewall to
        a separate directory;</para>
      </listitem>

      <listitem>
        <para>modify those files in the separate directory; and</para>
      </listitem>

      <listitem>
        <para>specifying the separate directory in a shorewall start or
        shorewall restart command (e.g., <emphasis role="bold">shorewall -c
        /etc/testconfig restart</emphasis> )</para>
      </listitem>
    </orderedlist>

    <para>The <ulink url="starting_and_stopping_shorewall.htm">try command</ulink>
    allows you to attempt to restart using an alternate configuration and if
    an error occurs to automatically restart the standard configuration.</para>
  </section>
</article>