holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity

More 3.0 Documentation Updates

Browse Source 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2598 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
This commit is contained in:
teastep 2005-08-30 22:46:02 +00:00
parent 988afa6bf5
commit 1a82d27d15
9 changed files with 186 additions and 767 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

71
Shorewall-docs2/Documentation.xml
View File

@ -411,8 +411,7 @@ NET_OPTIONS=blacklist,norfc1918</programlisting>
<listitem>
<para>short name for the zone. The name should be 5 characters or
less in length (4 characters or less if you are running Shorewall
1.4.4 or later) and consist of lower-case letters or numbers. Short
less in length and consist of lower-case letters or numbers. Short
names must begin with a letter and the name assigned to the firewall
is reserved for use by Shorewall itself. Note that the output
produced by iptables is much easier to read if you select short
@ -596,21 +595,21 @@ NET_OPTIONS=blacklist,norfc1918</programlisting>
<para>respond to arp requests based on the value of
&lt;<emphasis>number</emphasis>&gt;.</para>
<para> 1 - reply only if the target IP address is local
address configured on the incoming interface</para>
<para>1 - reply only if the target IP address is local address
configured on the incoming interface</para>
<para> 2 - reply only if the target IP address is local
address configured on the incoming interface and both with the
<para>2 - reply only if the target IP address is local address
configured on the incoming interface and both with the
sender's IP address are part from same subnet on this
interface</para>
<para> 3 - do not reply for local addresses configured with
<para>3 - do not reply for local addresses configured with
scope host, only resolutions for global and link addresses are
replied</para>
<para> 4-7 - reserved</para>
<para>4-7 - reserved</para>
<para> 8 - do not reply for all local addresses </para>
<para>8 - do not reply for all local addresses</para>
<para>If no &lt;<emphasis>number</emphasis>&gt; is given then
the value 1 is assumed</para>
@ -1056,13 +1055,6 @@ net eth0 detect dhcp,norfc1918
<para>Your /etc/shorewall/hosts file might look like:</para>
<programlisting>#ZONE HOST(S) OPTIONS
loc eth1:192.168.1.0/24
loc eth1:192.168.12.0/24</programlisting>
<para>If you are running Shorewall 1.4.6 or later, your hosts file may
look like:</para>
<programlisting>#ZONE HOST(S) OPTIONS
loc eth1:192.168.1.0/24,192.168.12.0/24</programlisting>
</example>
@ -1494,18 +1486,18 @@ DNAT net loc:192.168.1.3 tcp ssh
</varlistentry>
</variablelist>
<para> Rules in the ESTABLISHED and RELATED sections are limited to the
<para>Rules in the ESTABLISHED and RELATED sections are limited to the
following ACTIONs:</para>
<blockquote>
<para>ACCEPT, DROP, REJECT, QUEUE, LOG and User-defined actions. </para>
<para>ACCEPT, DROP, REJECT, QUEUE, LOG and User-defined actions.</para>
</blockquote>
<para>Macros may be used in these sections provided that they expand to
only these ACTIONs. At the end of the ESTABLISHED and RELATED sections,
there is an implicit ACCEPT rule.</para>
<para> RESTRICTION: If you specify FASTACCEPT=Yes in
<para>RESTRICTION: If you specify FASTACCEPT=Yes in
/etc/shorewall.shorewall.conf then the ESTABLISHED and RELATED sections
must be empty.</para>
@ -2005,7 +1997,7 @@ ACCEPT<emphasis role="bold">:info</emphasis> - - tc
<example>
<title>You wish to forward all ssh connection requests from the internet
to local system 192.168.1.3. You wish to limit the number of connections
to 4/minute with a burst of 8 (Shorewall 1.4.7 and later only):</title>
to 4/minute with a burst of 8:</title>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
DNAT&lt;4/min:8&gt; net loc:192.168.1.3 tcp ssh</programlisting>
@ -2109,11 +2101,10 @@ ACCEPT net fw:206.124.146.176 tcp 22</programlisting>
</example>
<example>
<title>(For advanced users running Shorewall version 1.3.13 or later).
From the internet, you with to forward tcp port 25 directed to
192.0.2.178 and 192.0.2.179 to host 192.0.2.177 in your DMZ. You also
want to allow access from the internet directly to tcp port 25 on
192.0.2.177.</title>
<title>(For advanced users). From the internet, you with to forward tcp
port 25 directed to 192.0.2.178 and 192.0.2.179 to host 192.0.2.177 in
your DMZ. You also want to allow access from the internet directly to
tcp port 25 on 192.0.2.177.</title>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
# PORT(S) DEST
@ -2126,20 +2117,18 @@ ACCEPT net dmz:192.0.2.177 tcp 25</programlisting>
</example>
<example>
<title>(Shorewall version 1.4.6 or later). You have 9 http servers
behind a Shorewall firewall and you want connection requests to be
distributed among your servers. The servers are
192.168.1.101-192.168.1.109.</title>
<title>You have 9 http servers behind a Shorewall firewall and you want
connection requests to be distributed among your servers. The servers
are 192.168.1.101-192.168.1.109.</title>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S)
DNAT net loc:192.168.1.101-192.168.1.109 tcp 80</programlisting>
</example>
<example>
<title>(Shorewall 2.0.2 Beta 2 and Later). You want to redirect all
local www connection requests EXCEPT those from 192.168.1.4 and
192.168.1.199 to a Squid transparent proxy running on the firewall and
listening on port 3128.</title>
<title>You want to redirect all local www connection requests EXCEPT
those from 192.168.1.4 and 192.168.1.199 to a Squid transparent proxy
running on the firewall and listening on port 3128.</title>
<programlisting>#ACTION SOURCE DEST PROTO DEST PORT(S) SOURCE ORIGINAL
# PORT(S) DEST
@ -2434,7 +2423,7 @@ eth0 192.168.10.0/24!192.168.10.44,192.168.10.45 206.124.146.176</programl
</example>
<example>
<title> You have a second IP address (206.124.146.177) assigned to you
<title>You have a second IP address (206.124.146.177) assigned to you
and wish to use it for SNAT of the subnet 192.168.12.0/24. You want to
give that address the name eth0:0. You must have ADD_SNAT_ALIASES=Yes in
<xref linkend="Conf" />.</title>
@ -2444,16 +2433,16 @@ eth0:0 192.168.12.0/24 206.124.146.177</programlisting>
</example>
<example>
<title> You want to use both 206.124.146.177 and 206.124.146.179 for
SNAT of the subnet 192.168.12.0/24. Each address will be used on
alternate outbound connections.</title>
<title>You want to use both 206.124.146.177 and 206.124.146.179 for SNAT
of the subnet 192.168.12.0/24. Each address will be used on alternate
outbound connections.</title>
<programlisting>#INTERFACE SUBNET ADDRESS
eth0 192.168.12.0/24 206.124.146.177,206.124.146.179</programlisting>
</example>
<example>
<title> You want all outgoing SMTP traffic entering the firewall on eth1
<title>You want all outgoing SMTP traffic entering the firewall on eth1
to be sent from eth0 with source IP address 206.124.146.177. You want
all other outgoing traffic from eth1 to be sent from eth0 with source IP
address 206.124.146.176.</title>
@ -3074,8 +3063,7 @@ eth0 eth1 206.124.146.176</programlisting>
under the <link linkend="rfc1918"><quote>norfc1918</quote>
mechanism</link> are logged. The value must be a valid <ulink
url="shorewall_logging.html">syslog level</ulink> and if no level is
given, then info is assumed. Prior to Shorewall version 1.3.12,
these packets are always logged at the info level.</para>
given, then info is assumed.</para>
</listitem>
</varlistentry>
@ -3633,8 +3621,7 @@ LOGBURST=5</programlisting>
</varlistentry>
</variablelist>
<para><filename>/etc/shorewall/tos</filename> file that is included with
Shorewall</para>
<para>Here's a sample <filename>/etc/shorewall/tos</filename> file:</para>
<programlisting>#SOURCE DEST PROTOCOL SOURCE PORTS(S) DEST PORTS(S) TOS
all all tcp - ssh 16

502
Shorewall-docs2/FAQ.xml
View File

@ -17,7 +17,7 @@
</author>
</authorgroup>
<pubdate>2005-08-24</pubdate>
<pubdate>2005-08-30</pubdate>
<copyright>
<year>2001-2005</year>
@ -36,6 +36,13 @@
</legalnotice>
</articleinfo>
<caution>
<para><emphasis role="bold">This article applies to Shorewall 3.0 and
later. If you are running a version of Shorewall earlier than Shorewall
3.0.0 then please see the documentation for that
release.</emphasis></para>
</caution>
<section>
<title>Installing Shorewall</title>
@ -90,9 +97,9 @@
message "warning: user teastep does not exist - using root"</title>
<para><emphasis role="bold">Answer:</emphasis> You may safely ignore
this warning message. It was caused by a minor packaging error
that has since been corrected. It makes no difference to
Shorewall's operation.</para>
this warning message. It was caused by a minor packaging error that has
since been corrected. It makes no difference to Shorewall's
operation.</para>
</section>
</section>
@ -373,15 +380,9 @@ DNAT net fw:192.168.1.1:22 tcp 4104</programlisting>
</listitem>
</itemizedlist>
<para>If you insist on a stupid IP solution to the accessibility problem
rather than a more efficient DNS solution, then if you are running
Shorewall 2.0.0 or 2.0.1 then please see the <ulink
url="http://www.shorewall.net/1.4/FAQ.htm#faq2">Shorewall 1.4
FAQ</ulink>.</para>
<para>Otherwise, assuming that your external interface is eth0 and your
internal interface is eth1 and that eth1 has IP address 192.168.1.254
with subnet 192.168.1.0/24, then:<warning>
<para>Assuming that your external interface is eth0 and your internal
interface is eth1 and that eth1 has IP address 192.168.1.254 with subnet
192.168.1.0/24, then:<warning>
<para>All traffic redirected through use of this hack will look to
the server as if it came from the firewall (192.168.1.254) rather
than from the original client!</para>
@ -410,14 +411,9 @@ eth1:192.168.1.5 eth1 192.168.1.254 tcp www</programlist
DNAT loc loc:192.168.1.5 tcp www - 130.151.100.69</programlisting>
<para>That rule only works of course if you have a static external
IP address. If you have a dynamic IP address and are running
Shorewall 1.3.4 through Shorewall 2.0.* then include this in
IP address. If you have a dynamic IP address then include this in
<filename>/etc/shorewall/init</filename>:</para>
<programlisting><command>ETH0_IP=`find_interface_address eth0`</command> </programlisting>
<para>For users of Shorewall 2.1.0 and later:</para>
<programlisting><command>ETH0_IP=`find_first_interface_address eth0`</command> </programlisting>
<para>and make your DNAT rule:</para>
@ -530,10 +526,6 @@ DNAT loc dmz:192.168.2.4 tcp 80 - 206
<para>In <filename>/etc/shorewall/init</filename>:</para>
<programlisting><command>ETH0_IP=`find_interface_address eth0`</command></programlisting>
<para>For users of Shorewall 2.1.0 and later:</para>
<programlisting><command>ETH0_IP=`find_first_interface_address eth0`</command> </programlisting>
<para>and make your DNAT rule:</para>
@ -587,40 +579,10 @@ to debug/develop the newnat interface.</programlisting></para>
and it shows some ports as <quote>closed</quote> rather than
<quote>blocked</quote>. Why?</title>
<para><emphasis role="bold">Answer:</emphasis> (Shorewall versions prior
to 2.0.0 only). The common.def included with version 1.3.x always
rejects connection requests on TCP port 113 rather than dropping them.
This is necessary to prevent outgoing connection problems to services
that use the <quote>Auth</quote> mechanism for identifying requesting
users. Shorewall also rejects TCP ports 135, 137, 139 and 445 as well as
UDP ports 137-139. These are ports that are used by Windows (Windows
<emphasis>can</emphasis> be configured to use the DCE cell locator on
port 135). Rejecting these connection requests rather than dropping them
cuts down slightly on the amount of Windows chatter on LAN segments
connected to the Firewall.</para>
<para>If you are seeing port 80 being <quote>closed</quote>, that's
probably your ISP preventing you from running a web server in violation
of your Service Agreement.</para>
<tip>
<para>You can change the default behavior of Shorewall through use of
an /etc/shorewall/common file. See the <ulink
url="shorewall_extension_scripts.htm">Extension Script
Section</ulink>.</para>
</tip>
<tip>
<para>Beginning with Shorewall 1.4.9, Shorewall no longer rejects the
Windows SMB ports (135-139 and 445) by default and silently drops them
instead.</para>
</tip>
<para><emphasis role="bold">Answer:</emphasis> (Shorewall versions 2.0.0
and later). The default Shorewall setup invokes the <emphasis
role="bold">Drop</emphasis> action prior to enforcing a DROP policy and
the default policy to all zone from the internet is DROP. The Drop
action is defined in
<para><emphasis role="bold">Answer:</emphasis> The default Shorewall
setup invokes the <emphasis role="bold">Drop</emphasis> action prior to
enforcing a DROP policy and the default policy to all zone from the
internet is DROP. The Drop action is defined in
<filename>/usr/share/shorewall/action.Drop</filename> which in turn
invokes the <emphasis role="bold">RejectAuth</emphasis> action (defined
in <filename>/usr/share/shorewall/action.RejectAuth</filename>). This is
@ -744,63 +706,6 @@ to debug/develop the newnat interface.</programlisting></para>
url="SimpleBridge.html">Shorewall Simple Bridge
documentation</ulink>.</para>
</section>
<section id="faq40">
<title>(FAQ 40) Shorewall is Blocking my OpenVPN Tunnel</title>
<para>I have this entry in <ulink
url="Documentation.htm#Tunnels">/etc/shorewall/tunnels</ulink>:</para>
<programlisting># TYPE ZONE GATEWAY GATEWAY
# ZONE
openvpn:5000 net 69.145.71.133</programlisting>
<para>Yet I am seeing this log message:</para>
<programlisting>Oct 12 13:41:03 localhost kernel: Shorewall:net2all:DROP:IN=eth0 OUT=
MAC=00:04:5a:7f:92:9f:00:b0:c2:89:68:e4:08:00 SRC=69.145.71.133
DST=216.187.138.18 LEN=42 TOS=0x00 PREC=0x00 TTL=46 ID=11 DF PROTO=UDP
SPT=33120 DPT=5000 LEN=22</programlisting>
<para><emphasis role="bold">Answer</emphasis>: Shorewall's <emphasis
role="bold">openvpn</emphasis> tunnel type assumes that OpenVPN will be
using the same port (default 5000) for both the source and destination
port. From the above message, it is clear that the remote client is
using source port 33120. The solution is to replace your <ulink
url="Documentation.htm#Tunnels">/etc/shorewall/tunnels</ulink> entry
with this one:</para>
<programlisting># TYPE ZONE GATEWAY GATEWAY
# ZONE
generic:udp:5000 net 69.145.71.133</programlisting>
</section>
<section id="faq47">
<title>(FAQ 47) This Rule Doesn't Work as Documented</title>
<para>I want to allow access from the local zone to the net except for
two systems (192.168.100.101 and 192.168.100.115). I use the following
rule but find that 192.168.100.115 can still access the net. Is this a
bug?</para>
<programlisting>#ACTION SOURCE DEST PROTO
ACCEPT loc:!192.168.100.101,192.168.100.115 net</programlisting>
<para><emphasis role="bold">Answer</emphasis>: Shorewall is currently
inconsistent as to where it correctly supports the "!" before a list of
addresses. In some places, it works as you would expect and in other
cases such as this one it does not. You will need to take a different
approach to accomplish what you want. I recommend that you change your
loc-&gt;net policy to ACCEPT and then use this rule:</para>
<programlisting>#ACTION SOURCE DEST PROTO
REJECT loc:192.168.100.101,192.168.100.115 net</programlisting>
<para><emphasis role="bold">Author's Note</emphasis>: I have looked
several times at correcting this problem but it really isn't feasible
until I muster the energy to rewrite the Shorewall rules parser.
Sorry.</para>
</section>
</section>
<section>
@ -831,9 +736,8 @@ REJECT loc:192.168.100.101,192.168.100.115 net</programlisting>
<programlisting>LOGLIMIT=""
LOGBURST=""</programlisting>
<para>Beginning with Shorewall version 1.3.12, you can <ulink
url="shorewall_logging.html">set up Shorewall to log all of its messages
to a separate file</ulink>.</para>
<para>It is also possible to <ulink url="shorewall_logging.html">set up
Shorewall to log all of its messages to a separate file</ulink>.</para>
<section id="faq6a">
<title>(FAQ 6a) Are there any log parsers that work with
@ -912,9 +816,7 @@ LOGBURST=""</programlisting>
<title>(FAQ 16) Shorewall is writing log messages all over my console
making it unusable!</title>
<para><emphasis role="bold">Answer:</emphasis> If you are running
Shorewall version 1.4.4 or 1.4.4a then check the <ulink
url="errata.htm">errata</ulink>. Otherwise:</para>
<para><emphasis role="bold">Answer:</emphasis> </para>
<itemizedlist>
<listitem>
@ -1279,240 +1181,8 @@ LOGBURST=""</programlisting>
<title>(FAQ 32) My firewall has two connections to the internet from two
different ISPs. How do I set this up in Shorewall?</title>
<important>
<para>Anyone with two Internet connections MUST read and understand
<ulink url="Shorewall_and_Routing.html">this article on Shorewall and
Routing</ulink>. If you don't, you will be completely lost trying to
make this work. And <emphasis role="bold">that article should be all
that you need if you are running Shorewall 2.3.2 or
later</emphasis>.</para>
</important>
<para>Setting this up in Shorewall is easy; setting up the routing is a
bit harder.</para>
<para>Assuming that <filename class="devicefile">eth0</filename> and
<filename class="devicefile">eth1</filename> are the interfaces to the
two ISPs then:</para>
<para><filename>/etc/shorewall/interfaces</filename>:</para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
net eth0 detect
net eth1 detect</programlisting>
<para><filename>/etc/shorewall/policy</filename>:</para>
<programlisting>#SOURCE DESTINATION POLICY LIMIT:BURST
net net DROP</programlisting>
<para>If you have masqueraded hosts, be sure to update
<filename>/etc/shorewall/masq</filename> to masquerade to both ISPs. For
example, if you masquerade all hosts connected to <filename
class="devicefile">eth2</filename> then:</para>
<programlisting>#INTERFACE SUBNET ADDRESS
eth0 eth2
eth1 eth2</programlisting>
<para>Again, if you are running Shorewall 2.3.2 or later, please see
<ulink url="Shorewall_and_Routing.html">this article</ulink> for
instructions for setting up the routing. Otherwise, follow the
instructions that follow.</para>
<para>There was an article in SysAdmin covering the topic of setting up
routing for this configuration. It may be found at <ulink
url="http://www.samag.com/documents/s=1824/sam0201h/">http://www.samag.com/documents/s=1824/sam0201h/</ulink>.</para>
<para>Stephen Carville has put together a Shorewall-specific writeup
that covers this subject at <ulink
url="http://www.heronforge.net/redhat/node17.html">http://www.heronforge.net/redhat/node17.html</ulink>.</para>
<para><citetitle>The following information regarding setting up routing
for this configuration is reproduced from the <ulink
url="http://www.lartc.org">LARTC HOWTO</ulink> and has not been verified
by the author. If you have questions or problems with the instructions
given below, please post to the <ulink
url="http://www.lartc.org/#mailinglist">LARTC mailing
list</ulink>.</citetitle></para>
<sidebar>
<para>A common configuration is the following, in which there are two
providers that connect a local network (or even a single machine) to
the big Internet.</para>
<programlisting> ________
+------------+ /
| | |
+-------------+ Provider 1 +-------
__ | | | /
___/ \_ +------+-------+ +------------+ |
_/ \__ | if1 | /
/ \ | | |
| Local network -----+ Linux router | | Internet
\_ __/ | | |
\__ __/ | if2 | \
\___/ +------+-------+ +------------+ |
| | | \
+-------------+ Provider 2 +-------
| | |
+------------+ \________
</programlisting>
<para>There are usually two questions given this setup.</para>
<para><emphasis role="bold">Split access</emphasis></para>
<para>The first is how to route answers to packets coming in over a
particular provider, say Provider 1, back out again over that same
provider.</para>
<para>Let us first set some symbolical names. Let <emphasis
role="bold">$IF1</emphasis> be the name of the first interface (if1 in
the picture above) and <emphasis role="bold">$IF2</emphasis> the name
of the second interface. Then let <emphasis
role="bold">$IP1</emphasis> be the IP address associated with
<emphasis role="bold">$IF1</emphasis> and <emphasis
role="bold">$IP2</emphasis> the IP address associated with <emphasis
role="bold">$IF2</emphasis>. Next, let <emphasis
role="bold">$P1</emphasis> be the IP address of the gateway at
Provider 1, and <emphasis role="bold">$P2</emphasis> the IP address of
the gateway at provider 2. Finally, let <emphasis
role="bold">$P1_NET</emphasis> be the IP network <emphasis
role="bold">$P1</emphasis> is in, and <emphasis
role="bold">$P2_NET</emphasis> the IP network <emphasis
role="bold">$P2</emphasis> is in.</para>
<para>One creates two additional routing tables, say <emphasis
role="bold">T1</emphasis> and <emphasis role="bold">T2</emphasis>.
These are added in /etc/iproute2/rt_tables. Then you set up routing in
these tables as follows:</para>
<programlisting>ip route add $P1_NET dev $IF1 src $IP1 table T1
ip route add default via $P1 table T1
ip route add $P2_NET dev $IF2 src $IP2 table T2
ip route add default via $P2 table T2</programlisting>
<para>Nothing spectacular, just build a route to the gateway and build
a default route via that gateway, as you would do in the case of a
single upstream provider, but put the routes in a separate table per
provider. Note that the network route suffices, as it tells you how to
find any host in that network, which includes the gateway, as
specified above.</para>
<para>Next you set up the main routing table. It is a good idea to
route things to the direct neighbour through the interface connected
to that neighbour. Note the `src' arguments, they make sure the right
outgoing IP address is chosen.</para>
<programlisting>ip route add $P1_NET dev $IF1 src $IP1
ip route add $P2_NET dev $IF2 src $IP2</programlisting>
<para>Then, your preference for default route:</para>
<programlisting>ip route add default via $P1</programlisting>
<para>Next, you set up the routing rules. These actually choose what
routing table to route with. You want to make sure that you route out
a given interface if you already have the corresponding source
address:</para>
<programlisting>ip rule add from $IP1 table T1
ip rule add from $IP2 table T2</programlisting>
<para>This set of commands makes sure all answers to traffic coming in
on a particular interface get answered from that interface.</para>
<note>
<para>'If $P0_NET is the local network and $IF0 is its interface,
the following additional entries are desirable:</para>
<programlisting format="linespecific">ip route add $P0_NET dev $IF0 table T1
ip route add $P2_NET dev $IF2 table T1
ip route add 127.0.0.0/8 dev lo table T1
ip route add $P0_NET dev $IF0 table T2
ip route add $P1_NET dev $IF1 table T2
ip route add 127.0.0.0/8 dev lo table T2</programlisting>
</note>
<para>Now, this is just the very basic setup. It will work for all
processes running on the router itself, and for the local network, if
it is masqueraded. If it is not, then you either have IP space from
both providers or you are going to want to masquerade to one of the
two providers. In both cases you will want to add rules selecting
which provider to route out from based on the IP address of the
machine in the local network.</para>
<para><emphasis role="bold">Load balancing</emphasis></para>
<para>The second question is how to balance traffic going out over the
two providers. This is actually not hard if you already have set up
split access as above.</para>
<para>Instead of choosing one of the two providers as your default
route, you now set up the default route to be a multipath route. In
the default kernel this will balance routes over the two providers. It
is done as follows (once more building on the example in the section
on split-access):</para>
<programlisting>ip route add default scope global nexthop via $P1 dev $IF1 weight 1 \
nexthop via $P2 dev $IF2 weight 1</programlisting>
<para>This will balance the routes over both providers. The <emphasis
role="bold">weight</emphasis> parameters can be tweaked to favor one
provider over the other.</para>
<note>
<para>balancing will not be perfect, as it is route based, and
routes are cached. This means that routes to often-used sites will
always be over the same provider.</para>
</note>
<para>Furthermore, if you really want to do this, you probably also
want to look at Julian Anastasov's patches at <ulink
url="http://www.ssi.bg/%7Eja/#routes">http://www.ssi.bg/~ja/#routes</ulink>
, Julian's route patch page. They will make things nicer to work
with.</para>
</sidebar>
<para>The following was contributed by Martin Brown and is an excerpt
from <citetitle> <ulink
url="http://www.docum.org/stef.coene/qos/faq/cache/44.html">http://www.docum.org/stef.coene/qos/faq/cache/44.html</ulink>
</citetitle>.</para>
<sidebar>
<para>There are two issues requiring different handling when dealing
with multiple Internet providers on a given network. The below assumes
that the host which has multiple Internet connections is a
masquerading (or NATting) host and is at the chokepoint between the
internal and external networks. For the use of multiple inbound
connections to the same internal server (public IP A from ISP A and
public IP B from ISP B both get redirected to the same internal
server), the ideal solution involves using two private IP addresses on
the internal server. This leads to an end-to-end uniqueness of public
IP to private IP and can be easily accomplished by following the
directions here:</para>
<para><ulink
url="http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-inbound">
<citetitle>http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-inbound</citetitle>
</ulink></para>
<para>For the use of multiple outbound links to the Internet, there
are a number of different techniques. The simplest is identified
here:</para>
<para><citetitle> <ulink
url="http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-outbound">http://linux-ip.net/html/adv-multi-internet.html#adv-multi-internet-outbound</ulink>
</citetitle></para>
<para>Better (and more robust) techniques are available after a kernel
routing patch by Julian Anastasov. See the famous nano-howto.</para>
<para><citetitle> <ulink
url="http://www.ssi.bg/~ja/">http://www.ssi.bg/~ja/</ulink>
</citetitle></para>
</sidebar>
<para>Answer: See <ulink url="Shorewall_and_Routing.html">this article
on Shorewall and Routing</ulink>. </para>
</section>
<section id="faq49">
@ -1664,8 +1334,8 @@ Creating input Chains...
output to a file as in <command>shorewall restart &gt;
/dev/null</command>).</para>
<para>Beginning with Shorewall version 2.0.2 Beta 1, Shorewall supports
a fast start capability. To use this capability:</para>
<para>Shorewall also supports a fast start capability. To use this
capability:</para>
<orderedlist>
<listitem>
@ -1712,66 +1382,6 @@ Creating input Chains...
<command>shorewall save</command>. Otherwise at the next reboot, you
will revert to the old configuration stored in
<filename>/var/lib/shorewall/restore</filename>.</para>
<section id="faq34a">
<title>(FAQ 34a) I get errors about a host or network not found when I
run<filename>/var/lib/shorewall/restore</filename>. The
<command>shorewall restore</command> and <command>shorewall -f
start</command> commands gives the same result.</title>
<para>Answer: iptables 1.2.9 is broken with respect to iptables-save
and the connection tracking match extension. You must patch your
iptables using the patch available from the <ulink
url="errata.htm">Shorewall errata page</ulink>.</para>
</section>
</section>
<section id="faq41">
<title>(FAQ 41) Why do I get modprobe failure messages when I start
Shorewall?</title>
<para>When I start shorewall I got the following errors.</para>
<programlisting>Oct 30 11:13:12 fwr modprobe: modprobe: Can't locate module ipt_conntrack
Oct 30 11:13:17 fwr modprobe: modprobe: Can't locate module ipt_pkttype
Oct 30 11:13:18 fwr modprobe: modprobe: Can't locate module ipt_pkttype
Oct 30 11:13:57 fwr last message repeated 2 times
Oct 30 11:14:06 fwr root: Shorewall Restarted</programlisting>
<para>The "shorewall status" output seems complying with my rules set.
Should I worry ? and is there any way to get rid of these errors
?</para>
<para><emphasis role="bold">Answer</emphasis>: You are seeing two
different things:</para>
<orderedlist>
<listitem>
<para>The normal checking that Shorewall does when it starts.
Shorewall tries to determine the the capabilities of your 'iptables'
and kernel and then taylors the ruleset accordingly.</para>
</listitem>
<listitem>
<para>A problem in Shorewall 2.0.3a through 2.0.5 whereby Shorewall
tried to use the <emphasis>pkttype match</emphasis> feature each
time that it wanted to generate a rule involving broadcast or
multicast packets.</para>
</listitem>
</orderedlist>
<para>You can suppress the messages by aliasing the modules mentioned in
the error messages to off in /etc/modules.conf. Just be sure to review
these aliases each time that you do a kernel upgrade to be sure that you
are not disabling a feature in your new kernel that you want to
use.</para>
<programlisting>alias ipt_conntrack off
alias ipt_pkttype off</programlisting>
<para>For users who don't have the pkttype match feature in their
kernel, I also recommend upgrading to Shorewall 2.0.6 or later and then
setting PKTTYPE=No in shorewall.conf.</para>
</section>
<section id="faq43">
@ -1940,18 +1550,6 @@ iptables: Invalid argument
</variablelist>
</section>
<section id="faq46">
<title>(FAQ 46) Given that the Debian Stable Release includes Shorewall
1.2.12, how can you not support that version?</title>
<para>The first release of Shorewall was in March of 2001. Shorewall
1.2.12 was released in May of 2002. It is now the year 2005 and
Shorewall 2.2 is available. Shorewall 1.2.12 is poorly documented and is
missing many of the features that Shorewall users find essential today
and it is silly to continue to run it simply because it is bundled with
an ancient Debian release.</para>
</section>
<section id="faq36">
<title>(FAQ 36) Does Shorewall Work with the 2.6 Linux Kernel?</title>
@ -2153,21 +1751,6 @@ eth0 eth1 # eth1 = interface to local netwo
<para>Edit /etc/shorewall/shorewall.conf and change
<quote>NEWNOTSYN=No</quote> to <quote>NEWNOTSYN=Yes</quote> then restart
Shorewall.</para>
<section id="faq26a">
<title>(FAQ 26a) When I try to use the <quote>-O</quote> option of
nmap from the firewall system, I get <quote>operation not
permitted</quote>. How do I allow this option?</title>
<para>If you are running Shorewall 2.2.0 or later, set DROPINVALID=No
in <ulink
url="Documentation.htm#Conf">/etc/shorewall/shorewall.conf</ulink>.</para>
<para>Otherwise, add this command to your /etc/shorewall/start
file:</para>
<programlisting><command>run_iptables -D OUTPUT -p ! icmp -m state --state INVALID -j DROP</command> </programlisting>
</section>
</section>
<section id="faq27">
@ -2278,36 +1861,33 @@ REJECT fw net:216.239.39.99 all</programlisting>Given that
<title>(FAQ 42) How can I tell which features my kernel and iptables
support?</title>
<para>Answer: Users running Shorewall 2.2.4 or later can simply use the
<command>shorewall show capabilities</command> command at a root
prompt.</para>
<para>Answer: Use the <command>shorewall show capabilities</command>
command at a root prompt.</para>
<para>For those running older versions, at a root prompt, enter the
command <command>shorewall check</command>. There is a section near the
top of the resulting output that gives you a synopsis of your
kernel/iptables capabilities.</para>
<programlisting>gateway:/etc/shorewall # shorewall check
<programlisting>gateway:~# shorewall show capabilities
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Notice: The 'check' command is unsupported and problem
reports complaining about errors that it didn't catch
will not be accepted
Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Extended Multi-port Match: Available
Connection Tracking Match: Available
Packet Type Match: Not available
Packet Type Match: Available
Policy Match: Available
Physdev Match: Available
IP range Match: Available
Verifying Configuration...
...</programlisting>
Recent Match: Available
Owner Match: Available
Ipset Match: Available
ROUTE Target: Available
Extended MARK Target: Available
CONNMARK Target: Available
Connmark Match: Available
Raw Table: Available
gateway:~#</programlisting>
</section>
</section>
</article>
</article>

69
Shorewall-docs2/IPSEC-2.6.xml
View File

@ -15,7 +15,7 @@
</author>
</authorgroup>
<pubdate>2005-08-20</pubdate>
<pubdate>2005-08-30</pubdate>
<copyright>
<year>2004</year>
@ -36,6 +36,13 @@
</legalnotice>
</articleinfo>
<caution>
<para><emphasis role="bold">This article applies to Shorewall 3.0 and
later. If you are running a version of Shorewall earlier than Shorewall
3.0.0 then please see the documentation for that
release.</emphasis></para>
</caution>
<important>
<para>The information in this article is only applicable if you plan to
have IPSEC end-points on the same system where Shorewall is used.</para>
@ -43,12 +50,10 @@
<warning>
<para>To use the features described in this article, your kernel and
iptables must include the Netfilter+ipsec patches and policy match support
and you must be running Shorewall 2.1.5 or later (with Shorewall 2.2.0
Beta 1 or later recommended). The Netfilter patches are available from
Netfilter Patch-O-Matic-NG and are also included in some commercial
distributions (most notably <trademark>SuSE</trademark> 9.1 and
9.2).</para>
iptables must include the Netfilter+ipsec patches and policy match
support. The Netfilter patches are available from Netfilter
Patch-O-Matic-NG and are also included in some commercial distributions
(most notably <trademark>SuSE</trademark> 9.1 through 9.3).</para>
</warning>
<important>
@ -106,7 +111,7 @@
</warning>
<section>
<title>Shorewall 2.2 and Kernel 2.6 IPSEC</title>
<title>Shorewall 3.0 and Kernel 2.6 IPSEC</title>
<para>This is <emphasis role="bold">not</emphasis> a HOWTO for Kernel 2.6
IPSEC -- for that, please see <ulink
@ -181,8 +186,8 @@
</listitem>
<listitem>
<para>A <filename>new </filename><ulink
url="Documentation.htm#Ipsec"><filename>/etc/shorewall/ipsec</filename></ulink>
<para>The<filename> </filename><ulink
url="Documentation.htm#Zones"><filename>/etc/shorewall/zones</filename></ulink>
file allows you to associate zones with traffic that will be encrypted
or that has been decrypted.</para>
</listitem>
@ -195,9 +200,8 @@
</listitem>
</orderedlist>
<para>In summary, Shorewall 2.1.5 and later versions provide the
facilities to replace the use of ipsec pseudo-interfaces in zone and
MASQUERADE/SNAT definition.</para>
<para>In summary, Shorewall provides the facilities to replace the use of
ipsec pseudo-interfaces in zone and MASQUERADE/SNAT definition.</para>
<para>There are two cases to consider:</para>
@ -250,7 +254,9 @@
<para>For more information on IPSEC, Kernel 2.6 and Shorewall see <ulink
url="LinuxFest.pdf">my presentation on the subject given at LinuxFest NW
2005</ulink>.</para>
2005</ulink>. Be warned though that the presentation is based on Shorewall
2.2 and there are some differences in the details of how IPSEC is
configured.</para>
</section>
<section>
@ -313,18 +319,13 @@ ipsec net 206.162.148.9
<para><filename>/etc/shorewall/zones</filename> — Systems A and
B:</para>
<programlisting>#ZONE DISPLAY COMMENTS
<programlisting>#ZONE IPSEC OPTIONS IN OUT
# ONLY OPTIONS OPTIONS#ZONE DISPLAY COMMENTS
vpn VPN Virtual Private Network
net Internet The big bad internet
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
</blockquote>
<important>
<para>Note that the <quote>vpn</quote> zone is defined before the
<quote>net</quote> zone. This is necessary if you are using a Shorewall
version earlier than 2.1.11.</para>
</important>
<para>Remember the assumption that both systems A and B have eth0 as their
internet interface.</para>
@ -466,7 +467,7 @@ sainfo address 192.168.1.0/24 any address 134.28.54.2/32 any
<para>If you have hosts that access the internet through an IPSEC
tunnel, then it is a good idea to set the MSS value for traffic from
those hosts explicitly in the
<filename>/etc/shorewall/ipsec</filename> file. For example, if hosts
<filename>/etc/shorewall/zones</filename> file. For example, if hosts
in the <emphasis role="bold">sec</emphasis> zone access the internet
through an ESP tunnel then the following entry would be
appropriate:</para>
@ -507,12 +508,6 @@ vpn VPN Road Warriors
net Internet The big bad internet
loc local Local Network (192.168.1.0/24)
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
<important>
<para>Note that the <quote>vpn</quote> zone is defined before the
<quote>net</quote> zone. This is necessary if you are using a
Shorewall version earlier than 2.1.11.</para>
</important>
</blockquote>
<para>In this instance, the mobile system (B) has IP address 134.28.54.2
@ -748,19 +743,6 @@ spdadd 192.168.20.40/32 192.168.20.10/32 any -P in ipsec esp/transport/192.168.
<para>Shorewall configuration goes as follows:</para>
<blockquote>
<para><filename>/etc/shorewall/zones</filename>:</para>
<programlisting>#ZONE DISPLAY COMMENTS
net Net Internet
loc Local Local Network
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
<important>
<para>Note that the <quote>vpn</quote> zone is defined before the
<quote>net</quote> zone. This is advised if you are using a Shorewall
version earlier than 2.1.11.</para>
</important>
<para><filename>/etc/shorewall/interfaces</filename>:</para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
@ -773,11 +755,12 @@ net eth0 detect routefilter,dhcp,tcpflags
# ZONE
ipsec:noah net 192.168.20.0/24 loc</programlisting>
<para>/etc/shorewall/ipsec:</para>
<para>/etc/shorewall/zones:</para>
<programlisting>#ZONE IPSEC OPTIONS IN OUT
# ONLY OPTIONS OPTIONS
loc Yes mode=transport</programlisting>
loc Yes mode=transport
net</programlisting>
<para><filename>/etc/shorewall/hosts</filename>:</para>

98
Shorewall-docs2/Install.xml
View File

@ -36,6 +36,13 @@
</legalnotice>
</articleinfo>
<caution>
<para><emphasis role="bold">This article applies to Shorewall 3.0 and
later. If you are installing or upgradeing to a version of Shorewall
earlier than Shorewall 3.0.0 then please see the documentation for that
release.</emphasis></para>
</caution>
<important>
<para>Before attempting installation, I strongly urge you to read and
print a copy of the <ulink url="shorewall_quickstart_guide.htm">Shorewall
@ -158,39 +165,11 @@
<listitem>
<para>cd to the shorewall directory (the version is encoded in the
directory name as in <quote>shorewall-1.1.10</quote>).</para>
directory name as in <quote>shorewall-3.0.0</quote>).</para>
</listitem>
<listitem>
<para>If you are running <ulink
url="http://www.slackware.com">Slackware</ulink>, you need Shorewall
2.0.2 RC1 or later. If you are installing a Shorewall version earlier
than 2.0.3 Beta 1 then you must also edit the install.sh file and
change the lines</para>
<programlisting>DEST="/etc/init.d"
INIT="shorewall"</programlisting>
<para>to</para>
<programlisting>DEST="/etc/rc.d"
INIT="rc.firewall"</programlisting>
</listitem>
<listitem>
<para>If you are running Slackware and are installing Shorewall 2.0.3
Beta 1 to Shorewall 2.2.3, then type:</para>
<programlisting><emphasis role="bold">DEST=/etc/rc.d INIT=rc.firewall ./install.sh</emphasis></programlisting>
<para>If you are running Slackware and are installing Shorewall 2.2.4
or later, then type:</para>
<programlisting><command>./install.sh</command></programlisting>
</listitem>
<listitem>
<para>Otherwise, type:</para>
<para>Type:</para>
<programlisting><command>./install.sh</command></programlisting>
</listitem>
@ -201,26 +180,9 @@ INIT="rc.firewall"</programlisting>
</listitem>
<listitem>
<para>Enable Startup:</para>
<itemizedlist>
<listitem>
<para>Users running Shorewall 2.1.3 or later, edit
<filename>/etc/shorewall/shorewall.conf</filename> and set
STARTUP_ENABLED=Yes.</para>
</listitem>
<listitem>
<para>Users running Shorewall 2.1.2 or earlier and using the .deb
should edit <filename>/etc/default/shorewall</filename> and set
startup=1.</para>
</listitem>
<listitem>
<para>All other users, remove the file
<filename>/etc/shorewall/startup_disabled</filename></para>
</listitem>
</itemizedlist>
<para>Enable Startup by editing
<filename>/etc/shorewall/shorewall.conf</filename> and set
STARTUP_ENABLED=Yes.</para>
</listitem>
<listitem>
@ -273,9 +235,9 @@ INIT="rc.firewall"</programlisting>
described <ulink
url="http://idea.sec.dico.unimi.it/%7Elorenzo/index.html#Debian">here</ulink>.</para>
<para>Once you have completed configuring Shorewall, you can enable
startup at boot time by setting startup=1 in
<filename>/etc/default/shorewall</filename>.</para>
<para><emphasis role="bold">Once you have completed configuring Shorewall,
you can enable startup at boot time by setting startup=1 in
<filename>/etc/default/shorewall</filename>.</emphasis></para>
</section>
<section>
@ -395,35 +357,7 @@ INIT="rc.firewall"</programlisting>
</listitem>
<listitem>
<para>If you are running <ulink
url="http://www.slackware.com">Slackware</ulink>, you should use
Shorewall 2.0.2 RC1 or later. If you are installing a Shorewall
version earlier than 2.0.3 Beta 1 then you must also edit the
install.sh file and change the lines</para>
<programlisting>DEST="/etc/init.d"
INIT="shorewall"</programlisting>
<para>to</para>
<programlisting>DEST="/etc/rc.d"
INIT="rc.firewall"</programlisting>
</listitem>
<listitem>
<para>If you are running Slackware and are installing Shorewall 2.0.3
Beta 1 through Shorewall 2.2.3, then type:</para>
<programlisting><emphasis role="bold">DEST=/etc/rc.d INIT=rc.firewall ./install.sh</emphasis></programlisting>
<para>If you are running Slackware and are installing Shorewall 2.2.4
or later, then type:</para>
<programlisting><command>./install.sh</command></programlisting>
</listitem>
<listitem>
<para>Otherwise, type:</para>
<para>Type:</para>
<programlisting><command>./install.sh</command></programlisting>
</listitem>

10
Shorewall-docs2/Introduction.xml
View File

@ -13,7 +13,7 @@
<surname>Eastep</surname>
</author>
<pubdate>2005-08-11</pubdate>
<pubdate>2005-08-30</pubdate>
<copyright>
<year>2003-2005</year>
@ -35,7 +35,7 @@
<section>
<title>Introduction</title>
<para>The information in this document applies only to 2.x releases of
<para>The information in this document applies only to 3.x releases of
Shorewall.</para>
<section>
@ -119,7 +119,7 @@
<para>Shorewall views the network where it is running as being composed of
a set of <firstterm>zones</firstterm>. In the <ulink
url="three-interface.htm">three-interface sample configuration</ulink> for
example, the following zone names are used: </para>
example, the following zone names are used:</para>
<programlisting>#NAME DESCRIPTION
net The Internet
@ -133,7 +133,9 @@ dmz Demilitarized Zone</programlisting>
<para>Shorewall also recognizes the firewall system as its own zone - by
default, the firewall itself is known as <emphasis
role="bold"><varname>fw</varname></emphasis>.</para>
role="bold"><varname>fw</varname></emphasis> but that may be changed by
setting the FW option in <ulink
url="Documentation.htm#Conf">/etc/shorewall/shorewall.conf</ulink>.</para>
<para>Rules about what traffic to allow and what traffic to deny are
expressed in terms of zones. <itemizedlist spacing="compact">

BIN
Shorewall-docs2/images/Troubleshoot.odg
View File

Binary file not shown.

BIN
Shorewall-docs2/images/Troubleshoot.png
View File

Binary file not shown.

160
Shorewall-docs2/starting_and_stopping_shorewall.xml
View File

@ -15,7 +15,7 @@
</author>
</authorgroup>
<pubdate>2005-05-23</pubdate>
<pubdate>2005-08-30</pubdate>
<copyright>
<year>2004</year>
@ -36,6 +36,12 @@
</legalnotice>
</articleinfo>
<caution>
<para>This article applies to Shorewall 3.0 and later. If you are running
a version of Shorewall earlier than Shorewall 3.0.0 then please see the
documentation for that release.</para>
</caution>
<section>
<title>Operational Components</title>
@ -213,14 +219,11 @@
<itemizedlist>
<listitem>
<para>Shorewall startup is disabled by default. Once you have
configured your firewall, you can enable startup by removing the
file <filename>/etc/shorewall/startup_disabled</filename>. Note:
Users of the .deb package must edit
<filename>/etc/default/shorewall</filename> and set
<quote>startup=1</quote> while users who are running Shorewall
2.1.3 or later must edit
<filename>/etc/shorewall/shorewall.conf</filename> and set
STARTUP_ENABLED=Yes.</para>
configured your firewall, you can enable startup by editing
<filename>/etc/shorewall/shorewall.conf</filename> and setting
STARTUP_ENABLED=Yes.. Note: Users of the .deb package must also
edit <filename>/etc/default/shorewall</filename> and set
<quote>startup=1</quote>.</para>
</listitem>
<listitem>
@ -357,14 +360,6 @@
Shorewall to check before looking in the directories listed in
CONFIG_PATH.</para>
<para>Shorewall versions before Shorewall 2.2.0:</para>
<programlisting> <command>shorewall [ -c &lt;configuration-directory&gt; ] {start|restart|check}</command>
<command>shorewall try &lt;configuration-directory&gt; [ &lt;timeout&gt; ]</command></programlisting>
<para>Shorewall versions 2.2.0 and later the -c option is
deprecated:</para>
<programlisting> <command>shorewall {start|restart|check} &lt;configuration-directory&gt;</command>
<command>shorewall try &lt;configuration-directory&gt; [ &lt;timeout&gt; ]</command></programlisting>
@ -468,12 +463,6 @@
<para>Adds an interface (and list of hosts if included) to a dynamic
zone usually used with VPN's.</para>
<para>Note that there was no provision in the syntax for specifying
a <ulink url="bridge.html">bridge</ulink> port prior to Shorewall
versions 2.0.12 and 2.2.0 Beta 7 and that the "shorewall add"
command was not supported for hosts connected to the firewall
through a bridge port prior to those releases.</para>
<para>Example: <command>shorewall add ipsec0:192.0.2.24
vpn1</command></para>
@ -497,32 +486,17 @@
</varlistentry>
<varlistentry>
<term>check (Shorewall versions prior to 2.2.0)</term>
<listitem>
<para><command>shorewall [ -c &lt;configuration-directory&gt; ]
check</command></para>
<para>Performs a cursory validation of the zones, interfaces, hosts,
rules and policy files. Use this if you are unsure of any edits you
have made to the shorewall configuration. See <link
linkend="AltConfig">above</link> for a recommended way to make
changes.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>check (Shorewall 2.2.0 and later)</term>
<term>check</term>
<listitem>
<para><command>shorewall [-q] check [
&lt;configuration-directory&gt; ]</command></para>
<para>Performs a cursory validation of the zones, interfaces, hosts,
rules and policy files. Use this if you are unsure of any edits you
have made to the shorewall configuration. See <link
linkend="AltConfig">above</link> for a recommended way to make
changes.</para>
rules, policy, masq, blacklist, proxyarp, nat and provider files.
Use this if you are unsure of any edits you have made to the
shorewall configuration. See <link linkend="AltConfig">above</link>
for a recommended way to make changes.</para>
</listitem>
</varlistentry>
@ -568,12 +542,6 @@
<para>Deletes the specified interface (and host list if included)
from the specified zone.</para>
<para>Note that there was no provision in the syntax for specifying
a <ulink url="bridge.html">bridge</ulink> port prior to Shorewall
versions 2.0.12 and 2.2.0 Beta 7 and that the "shorewall delete"
command was not supported for hosts connected to the firewall
through a bridge port prior to those releases.</para>
<para>Example:</para>
<para><command>shorewall delete ipsec0:192.0.2.24
@ -595,6 +563,19 @@
</listitem>
</varlistentry>
<varlistentry>
<term>dump</term>
<listitem>
<para><command>shorewall [ -x ] dump</command></para>
<para>Produce a verbose report about the firewall.</para>
<para>When -x is given, that option is also passed to iptables to
display actual packet and byte counts.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>forget</term>
@ -679,22 +660,6 @@
</listitem>
</varlistentry>
<varlistentry>
<term>monitor</term>
<listitem>
<para><command>shorewall [-x] monitor
[&lt;refresh_interval&gt;]</command></para>
<para>Continuously display the firewall status, last 20 log entries
and nat. When the log entry display changes, an audible alarm is
sounded.</para>
<para>When -x is given, that option is also passed to iptables to
display actual packet and byte counts.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>refresh</term>
@ -733,21 +698,7 @@
</varlistentry>
<varlistentry>
<term>restart (Prior to Shorewall version 2.2.0)</term>
<listitem>
<para><command>shorewall [ -q ] [ -c &lt;configuration-directory&gt;
] restart</command></para>
<para>Restart is similar to <command>shorewall stop</command>
followed by <command>shorewall start</command>. Existing connections
are maintained. If -q is specified, less detail is displayed making
it easier to spot warnings</para>
</listitem>
</varlistentry>
<varlistentry>
<term>restart (Shorewall version 2.2.0 and later)</term>
<term>restart</term>
<listitem>
<para><command>shorewall [ -q ] restart
@ -781,7 +732,7 @@
</varlistentry>
<varlistentry>
<term>safe-restart (Shorewall version 2.4.0 and later)</term>
<term>safe-restart</term>
<listitem>
<para><command>shorewall [ -q ] safe-restart [ &lt;filename&gt;
@ -800,7 +751,7 @@
</varlistentry>
<varlistentry>
<term>safe-start (Shorewall version 2.4.0 and later)</term>
<term>safe-start</term>
<listitem>
<para><command>shorewall [ -q ] safe-start [ &lt;filename&gt;
@ -853,9 +804,8 @@
<para><command>shorewall show log</command> - display the last 20
packet log entries.</para>
<para><command>shorewall show capabilities</command> - Added in
Shorewall version 2.2.4 and displays your kernel/iptables
capabilities</para>
<para><command>shorewall show capabilities</command> - Displays your
kernel/iptables capabilities</para>
<para><command>shorewall show connections</command> - displays the
IP connections currently being tracked by the firewall.</para>
@ -866,11 +816,8 @@
<para><command>shorewall show tc</command> - displays information
about the traffic control/shaping configuration.</para>
<para><command>shorewall show zones</command> — Added in Shorewall
version 2.2.0 Beta 7. Enabled when Shorewall is [re]started with
DYNAMIC_ZONES=Yes in <ulink
url="Documentation.htm#Conf">/etc/shorewall/shorewall.conf</ulink>.
Displays the composition of each zone.</para>
<para><command>shorewall show zones</command> — Displays the
composition of each zone.</para>
<para>When -x is given, that option is also passed to iptables to
display actual packet and byte counts.</para>
@ -878,25 +825,7 @@
</varlistentry>
<varlistentry>
<term>start (Shorewall versions prior to 2.2.0)</term>
<listitem>
<para><command>shorewall [ -q ] [ -f ] [ -c
&lt;configuration-directory&gt; ] start</command></para>
<para>Start shorewall. Existing connections through shorewall
managed interfaces are untouched. New connections will be allowed
only if they are allowed by the firewall rules or policies. If -q is
specified, less detail is displayed making it easier to spot
warnings If -f is specified, the saved configuration specified by
the RESTOREFILE option in <ulink
url="Documentation.htm#Conf">/etc/shorewall/shorewall.conf</ulink>
will be restored if that saved configuration exists</para>
</listitem>
</varlistentry>
<varlistentry>
<term>start (Shorewall 2.2.0 and later)</term>
<term>start</term>
<listitem>
<para><command>shorewall [ -q ] [ -f ] start [
@ -935,12 +864,10 @@
<term>status</term>
<listitem>
<para><command>shorewall [ -x ] status</command></para>
<para><command>shorewall status</command></para>
<para>Produce a verbose report about the firewall.</para>
<para>When -x is given, that option is also passed to iptables to
display actual packet and byte counts.</para>
<para>Produce a short report about the firewall's status and state
relative to <link linkend="State">the diagram below</link>.</para>
</listitem>
</varlistentry>
@ -1020,9 +947,8 @@
<entry>firewall stop</entry>
<entry>Only traffic to/from hosts listed in /etc/shorewall/hosts
is passed to/from/through the firewall. For Shorewall versions
beginning with 1.4.7, if ADMINISABSENTMINDED=Yes in
/etc/shorewall/shorewall.conf then in addition, all existing
is passed to/from/through the firewall. If ADMINISABSENTMINDED=Yes
in /etc/shorewall/shorewall.conf then in addition, all existing
connections are retained and all connection requests from the
firewall are accepted.</entry>
</row>

43
Shorewall-docs2/support.xml
View File

@ -15,7 +15,7 @@
</author>
</authorgroup>
<pubdate>2005-07-19</pubdate>
<pubdate>2005-08-30</pubdate>
<copyright>
<year>2001-2005</year>
@ -41,6 +41,13 @@
</legalnotice>
</articleinfo>
<caution>
<para><emphasis role="bold">This article applies to Shorewall 3.0 and
later. If you are running a version of Shorewall earlier than Shorewall
3.0.0 then please see the documentation for that
release.</emphasis></para>
</caution>
<section>
<title>Before Reporting a Problem or Asking a Question</title>
@ -49,14 +56,14 @@
<itemizedlist>
<listitem>
<para>The two currently-supported Shorewall <ulink
url="ReleaseModel.html">major releases</ulink> are 2.4 and 2.2.
<para>The three currently-supported Shorewall <ulink
url="ReleaseModel.html">major releases</ulink> are 3.0, 2.4 and 2.2.
Because of the short time between the releases of 2.2.0 and 2.4.0,
Shorewall 2.0 will be supported until 1 December 2005 or until the
release of 2.6.0, whichever comes first.</para>
Shorewall 2.2 will be supported until 1 December 2006 or until the
release of 3.1.0, whichever comes first.</para>
<note>
<para>Shorewall versions earlier than 2.0.0 are no longer supported;
<para>Shorewall versions earlier than 2.2.0 are no longer supported;
we will only answer your question if it deals with upgrading from
these old releases to a current one.</para>
</note>
@ -134,32 +141,32 @@ gateway:~#</programlisting>
the following command:</para>
<blockquote>
<programlisting><command>/sbin/shorewall show shorewall</command></programlisting>
<programlisting><command>/sbin/shorewall status shorewall</command></programlisting>
</blockquote>
<para>If Shorewall has started successfully, you will see output
similar to this:</para>
<blockquote>
<programlisting>Shorewall-2.2.3 Chain shorewall at gateway - Wed Apr 20 14:41:53 PDT 2005
<programlisting>Shorewall-2.5.4 Status at gateway - Tue Aug 30 14:07:29 PDT 2005
Counters reset Sat Apr 16 17:35:06 PDT 2005
<emphasis role="bold">Chain shorewall (0 references)
pkts bytes target prot opt in out source destination</emphasis></programlisting>
Shorewall is running
State:Started (Tue Aug 30 07:18:07 PDT 2005)</programlisting>
</blockquote>
<para>If Shorewall has not started properly, you will see output
similar to this:</para>
<blockquote>
<programlisting>Shorewall-2.2.3 Chain shorewall at gateway - Wed Apr 20 14:43:13 PDT 2005
<programlisting>Shorewall-2.5.4 Status at gateway - Tue Aug 30 14:08:11 PDT 2005
Counters reset Sat Apr 16 17:35:06 PDT 2005
<emphasis role="bold">iptables: No chain/target/match by that name</emphasis>
</programlisting>
Shorewall is stopped
State:Stopped (Tue Aug 30 14:08:11 PDT 2005)</programlisting>
</blockquote>
<para>The "State:" refers to the <ulink
url="starting_and_stopping_shorewall.htm%23State">Shorewall State
Diagram</ulink>.</para>
</listitem>
<listitem>
@ -182,7 +189,7 @@ Counters reset Sat Apr 16 17:35:06 PDT 2005
</listitem>
<listitem>
<para><command>/sbin/shorewall status &gt;
<para><command>/sbin/shorewall dump &gt;
/tmp/status.txt</command></para>
</listitem>