diff --git a/Shorewall-lite/shorewall-lite b/Shorewall-lite/shorewall-lite
index 3f6a91b0a..fc6ffcd4d 100755
--- a/Shorewall-lite/shorewall-lite
+++ b/Shorewall-lite/shorewall-lite
@@ -25,65 +25,6 @@
 #
 #     If an error occurs while starting or restarting the firewall, the
 #     firewall is automatically stopped.
-#
-#     Commands are:
-#
-#     shorewall-lite dump                          Dumps all Shorewall-related information
-#                                                  for problem analysis
-#     shorewall-lite start 			   Starts the firewall
-#     shorewall-lite restart			   Restarts the firewall
-#     shorewall-lite stop			   Stops the firewall
-#     shorewall-lite status			   Displays firewall status
-#     shorewall-lite reset			   Resets iptables packet and
-#						   byte counts
-#     shorewall-lite clear			   Open the floodgates by
-#						   removing all iptables rules
-#						   and setting the three permanent
-#						   chain policies to ACCEPT
-#     shorewall-lite show <chain> [ <chain> ... ]  Display the rules in each <chain> listed
-#     shorewall-lite show log			   Print the last 20 log messages
-#     shorewall-lite show connections		   Show the kernel's connection
-#						   tracking table
-#     shorewall-lite show nat			   Display the rules in the nat table
-#     shorewall-lite show {mangle|tos}		   Display the rules in the mangle table
-#     shorewall-lite show tc			   Display traffic control info
-#     shorewall-lite show classifiers		   Display classifiers
-#     shorewall-lite show capabilities             Display iptables/kernel capabilities
-#     shorewall-lite show vardir                   Display VARDIR setting
-#     shorewall-lite version			   Display the installed version id
-#     shorewall-lite logwatch [ refresh-interval ] Monitor the local log for Shorewall
-#						   messages.
-#     shorewall-lite drop <address> ...		   Temporarily drop all packets from the
-#						   listed address(es)
-#     shorewall-lite reject <address> ...	   Temporarily reject all packets from the
-#						   listed address(es)
-#     shorewall-lite allow <address> ...	   Reenable address(es) previously
-#						   disabled with "drop" or "reject"
-#     shorewall-lite save [ <file> ]		   Save the list of "rejected" and
-#						   "dropped" addresses so that it will
-#						   be automatically reinstated the
-#						   next time that Shorewall starts.
-#                                                  Save the current state so that 'shorewall
-#                                                  restore' can be used.
-#
-#     shorewall-lite forget [ <file> ]             Discard the data saved by 'shorewall save'
-#
-#     shorewall-lite restore [ <file> ]            Restore the state of the firewall from
-#                                                  previously saved information.
-#
-#     shorewall-lite ipaddr { <address>/<cidr> | <address> <netmask> }
-#
-#                                                  Displays information about the network
-#                                                  defined by the argument[s]
-#
-#     shorewall-lite iprange <address>-<address>   Decomposes a range of IP addresses into
-#                                                  a list of network/host addresses.
-#
-#     shorewall-lite ipdecimal { <address> | <integer> }
-#
-#                                                  Displays the decimal equivalent of an IP
-#                                                  address and vice versa.
-
 #
 # Set the configuration variables from shorewall-lite.conf
 #
@@ -113,17 +54,36 @@ get_config() {
 
     [ -n "$FW" ] || FW=fw
 
-    if [ -n "$IPTABLES" ]; then
-	if [ ! -x "$IPTABLES" ]; then
-	    echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
-	    exit 2
+    if [ $g_family -eq 4 ]; then
+	if [ -n "$IPTABLES" ]; then
+	    if [ ! -x "$IPTABLES" ]; then
+		echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
+		exit 2
+	    fi
+	else	 
+	    IPTABLES=$(mywhich iptables 2> /dev/null)
+	    if [ -z "$IPTABLES" ] ; then
+		echo "   ERROR: Can't find iptables executable" >&2
+		exit 2
+	    fi
 	fi
+
+	g_tool=#$IPTABLES
     else
-	IPTABLES=$(mywhich iptables 2> /dev/null)
-	if [ -z "$IPTABLES" ] ; then
-	    echo "   ERROR: Can't find iptables executable" >&2
-	    exit 2
+	if [ -n "$IP6TABLES" ]; then
+	    if [ ! -x "$IP6TABLES" ]; then
+		echo "   ERROR: The program specified in IP6TABLES does not exist or is not executable" >&2
+		exit 2
+	    fi
+	else	 
+	    IP6TABLES=$(mywhich ip6tables 2> /dev/null)
+	    if [ -z "$IP6TABLES" ] ; then
+		echo "   ERROR: Can't find ip6tables executable" >&2
+		exit 2
+	    fi
 	fi
+
+	g_tool=$IP6TABLES
     fi
 
     if [ -n "$SHOREWALL_SHELL" ]; then
@@ -165,7 +125,7 @@ get_config() {
 #
 verify_firewall_script() {
     if [ ! -f $g_firewall ]; then
-	echo "   ERROR: Shorewall Lite is not properly installed" >&2
+	echo "   ERROR: $g_product is not properly installed" >&2
 	if [ -L $g_firewall ]; then
 	    echo "          $g_firewall is a symbolic link to a" >&2
 	    echo "          non-existant file" >&2
@@ -203,7 +163,7 @@ start_command() {
 	    rc=$?
 	else
 	    error_message "${LITEDIR}/firewall is missing or is not executable"
-	    logger -p kern.err "ERROR:Shorewall Lite start failed"
+	    logger -p kern.err "ERROR:$g_product start failed"
 	    rc=2
 	fi
 
@@ -213,8 +173,13 @@ start_command() {
 
     verify_firewall_script
 
-    if shorewall_is_started; then
-	error_message "Shorewall is already running"
+    if product_is_started; then
+	if [ $g_family -eq 4 ]; then
+	    error_message "Shorewall is already running"
+	else
+	    error_message "Shorewall6 is already running"
+	fi
+
 	exit 0
     fi
 
@@ -271,10 +236,10 @@ start_command() {
 	    g_restorepath=${VARDIR}/$RESTOREFILE
 
 	    if [ -x $g_restorepath ]; then
-		echo Restoring Shorewall Lite...
+		echo Restoring $g_product...
 		run_it $g_restorepath restore
 		date > ${VARDIR}/restarted
-		progress_message3 Shorewall Lite restored from $g_restorepath
+		progress_message3 $g_product restored from $g_restorepath
 	    else
 		do_it
 	    fi
@@ -346,7 +311,7 @@ restart_command() {
 	rc=$?
     else
 	error_message "${LITEDIR}/firewall is missing or is not executable"
-	logger -p kern.err "ERROR:Shorewall Lite restart failed"
+	logger -p kern.err "ERROR:$g_product restart failed"
 	rc=2
     fi
 
@@ -371,9 +336,13 @@ usage() # $1 = exit status
     echo "   enable <interface>"
     echo "   forget [ <file name> ]"
     echo "   help"
-    echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
-    echo "   ipdecimal { <address> | <integer> }"
-    echo "   iprange <address>-<address>"
+
+    if [ $g_family -eq 4 ]; then
+	echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
+	echo "   ipdecimal { <address> | <integer> }"
+	echo "   iprange <address>-<address>"
+    fi
+
     echo "   logdrop <address> ..."
     echo "   logreject <address> ..."
     echo "   logwatch [<refresh interval>]"
@@ -390,7 +359,7 @@ usage() # $1 = exit status
     echo "   show filters"
     echo "   show ip"
     echo "   show [ -m ] log [<regex>]"
-    echo "   show [ -x ] mangle|nat|raw|routing"
+    echo "   show [ -x ] mangle|nat|raw|rawpost|routing"
     echo "   show policies"
     echo "   show tc [ device ]"
     echo "   show vardir"
@@ -444,8 +413,8 @@ version_command() {
     echo $SHOREWALL_VERSION
     
     if [ -n "$all" ]; then
-	for product in shorewall shorewall6 shorewall6-lite shorewall-init; do
-	    if [ -f /usr/share/$product/version ]; then
+	for product in shorewall shorewall6 shorewall-lite shorewall6-lite shorewall-init; do
+	    if [ $product ~= $g_program] && [ -f /usr/share/$product/version ]; then
 		echo "$product: $(cat /usr/share/$product/version)"
 	    fi
 	done
@@ -476,6 +445,7 @@ g_use_verbosity=
 g_noroutes=
 g_timestamp=
 g_recovering=
+g_purge=
 g_logread=
 
 #
@@ -569,14 +539,30 @@ fi
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 MUTEX_TIMEOUT=
 
-SHAREDIR=/usr/share/shorewall-lite
-CONFDIR=/etc/shorewall-lite
-g_product="Shorewall Lite"
+g_program=$(basename $0)
+
+if [ $g_program = shorewall6-lite ]; then
+    SHAREDIR=/usr/share/shorewall6-lite
+    CONFDIR=/etc/shorewall6-lite
+    g_product="Shorewall6 Lite"
+    g_family=6
+    g_base=shorewall6
+    g_tool=ip6tables
+else
+    g_program=shorewall-lite
+    SHAREDIR=/usr/share/shorewall-lite
+    CONFDIR=/etc/shorewall-lite
+    g_product="Shorewall Lite"
+    g_family=4
+    g_base=shorewall
+    g_tool=iptables
+fi
+
 g_libexec=share
 
 [ -f ${CONFDIR}/vardir ] && . ${CONFDIR}/vardir ]
 
-[ -n "${VARDIR:=/var/lib/shorewall-lite}" ]
+[ -n "${VARDIR:=/var/lib/${g_base}-lite}" ]
 
 [ -d $VARDIR ] || mkdir -p $VARDIR || fatal_error "Unable to create $VARDIR"
 
@@ -588,7 +574,7 @@ done
 
 ensure_config_path
 
-config=$(find_file shorewall-lite.conf)
+config=$(find_file ${g_base}-lite.conf)
 
 if [ -f $config ]; then
     if [ -r $config ]; then
@@ -615,12 +601,12 @@ g_firewall=$LITEDIR/firewall
 if [ -f $version_file ]; then
     SHOREWALL_VERSION=$(cat $version_file)
 else
-    echo "   ERROR: Shorewall Lite is not properly installed" >&2
+    echo "   ERROR: $g_product is not properly installed" >&2
     echo "          The file $version_file does not exist" >&2
     exit 1
 fi
 
-banner="Shorewall Lite $SHOREWALL_VERSION Status at $g_hostname -"
+banner="$g_product $SHOREWALL_VERSION Status at $g_hostname -"
 
 case $(echo -e) in
     -e*)
@@ -658,7 +644,7 @@ case "$COMMAND" in
 	;;
     restart)
 	shift
-	restart_command
+	restart_command @
 	;;
     show|list)
     	shift
@@ -667,13 +653,13 @@ case "$COMMAND" in
     status)
 	[ $# -eq 1 ] || usage 1
 	[ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root"
-	echo "Shorewall Lite $SHOREWALL_VERSION Status at $g_hostname - $(date)"
+	echo "$g_product $SHOREWALL_VERSION Status at $g_hostname - $(date)"
 	echo
-	if shorewall_is_started ; then
-	    echo "Shorewall Lite is running"
+	if product_is_started ; then
+	    echo "$g_product is running"
 	    status=0
 	else
-	    echo "Shorewall Lite is stopped"
+	    echo "$g_product is stopped"
 	    status=4
 	fi
 
@@ -710,36 +696,36 @@ case "$COMMAND" in
     drop)
 	[ -n "$debugging" ] && set -x
 	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
+	if product_is_started ; then
 	    [ -n "$nolock" ] || mutex_on
 	    block DROP Dropped $*
 	    [ -n "$nolock" ] || mutex_off
 	else
-	    error_message "ERROR: Shorewall Lite is not started"
+	    error_message "ERROR: $g_product is not started"
 	    exit 2
 	fi
 	;;
     logdrop)
 	[ -n "$debugging" ] && set -x
 	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
+	if product_is_started ; then
 	    [ -n "$nolock" ] || mutex_on
 	    block logdrop Dropped $*
 	    [ -n "$nolock" ] || mutex_off
 	else
-	    error_message "ERROR: Shorewall Lite is not started"
+	    error_message "ERROR: $g_product is not started"
 	    exit 2
 	fi
 	;;
     reject|logreject)
 	[ -n "$debugging" ] && set -x
 	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
+	if product_is_started ; then
 	    [ -n "$nolock" ] || mutex_on
 	    block $COMMAND Rejected $*
 	    [ -n "$nolock" ] || mutex_off
 	else
-	    error_message "ERROR: Shorewall Lite is not started"
+	    error_message "ERROR: $g_product is not started"
 	    exit 2
 	fi
 	;;
@@ -758,7 +744,7 @@ case "$COMMAND" in
 	;;
     disable|enable)
 	get_config Yes
-	if shorewall_is_started; then
+	if product_is_started; then
 	    run_it ${VARDIR}/firewall $g_debugging $@
 	else
 	    fatal_error "Shorewall is not running"
diff --git a/Shorewall/lib.base b/Shorewall/lib.base
index 893077345..eff439e95 100644
--- a/Shorewall/lib.base
+++ b/Shorewall/lib.base
@@ -23,16 +23,17 @@
 # This library contains the code common to all Shorewall components.
 #
 # - It is loaded by /sbin/shorewall.
-# - It is released as part of Shorewall Lite where it is used by /sbin/shorewall-lite
-#   and /usr/share/shorewall-lite/shorecap.
+# - It is released as part of Shorewall[6] Lite where it is used by /sbin/shorewall[6]-lite
+#   and /usr/share/shorewall[6]-lite/shorecap.
 #
 
 SHOREWALL_LIBVERSION=40407
 SHOREWALL_CAPVERSION=40426
 
-[ -n "${VARDIR:=/var/lib/shorewall}" ]
-[ -n "${SHAREDIR:=/usr/share/shorewall}" ]
-[ -n "${CONFDIR:=/etc/shorewall}" ]
+[ -n "${g_program:=shorewall}" ]
+[ -n "${VARDIR:=/var/lib/$g_program}" ]
+[ -n "${SHAREDIR:=/usr/share/g_program}" ]
+[ -n "${CONFDIR:=/etc/$g_program}" ]
 
 #
 # Conditionally produce message
@@ -378,9 +379,8 @@ resolve_file() # $1 = file name
     esac
 }
 
-# Function to truncate a string -- It uses 'cut -b -<n>'
-# rather than ${v:first:last} because light-weight shells like ash and
-# dash do not support that form of expansion.
+#
+# Determine how to do "echo -e"
 #
 
 find_echo() {
diff --git a/Shorewall/lib.cli b/Shorewall/lib.cli
index 230ae6ffd..2a822de0e 100644
--- a/Shorewall/lib.cli
+++ b/Shorewall/lib.cli
@@ -3,7 +3,7 @@
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -20,8 +20,8 @@
 #	along with this program; if not, write to the Free Software
 #	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-# This library contains the command processing code common to /sbin/shorewall and
-# /sbin/shorewall-lite.
+# This library contains the command processing code common to /sbin/shorewall[6] and
+# /sbin/shorewall[6]-lite.
 #
 
 #
@@ -70,15 +70,18 @@ showchain() # $1 = name of chain
 
 iptablesbug()
 {
-    if qt mywhich awk ; then
-	awk 'BEGIN           { sline=""; };\
+    if [ $g_family -eq 4 ]; then
+	if qt mywhich awk ; then
+	    awk 'BEGIN           { sline=""; };\
              /^-j/           { print sline $0; next };\
              /-m policy.*-j/ { print $0; next };\
              /-m policy/     { sline=$0; next };\
              /--mask ff/     { sub( /--mask ff/, "--mask 0xff" ) };\
                              { print ; sline="" }'
+        else
+	    echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
+	    cat
     else
-	echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
 	cat
     fi
 }
@@ -152,18 +155,30 @@ syslog_circular_buffer() {
 packet_log() # $1 = number of messages
 {
     if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
-    else
+	if [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	else
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' | head -n$1 | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	fi
+    elif [ $family -eq 4 ]; then
 	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
+    else
+	$g_logread | grep 'IN=.* OUT=.*SRC=.*:.*DST=' |  head -n$1 | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
     fi
 }
 
 search_log() # $1 = IP address to search for
 {
     if [ -n "$g_showmacs" -o $VERBOSITY -gt 2 ]; then
-	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
-    else
+        if [ $g_family -eq 4 ]; then
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
+	else
+	    $g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' | grep "$1" | tac | sed -r 's/ kernel://; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
+	fi
+    elif [ $g_family -eq 4 ]; then
 	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
+    else
+	$g_logread | grep 'IN=.* OUT=.*SRC=.*\..*DST=' |  grep "$1" | tac | sed -r 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] //; s/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | sed s/" $host $LOGFORMAT"/" "/
     fi
 }
 
@@ -239,7 +254,7 @@ logwatch() # $1 = timeout -- if negative, prompt each time that
     fi
 
     host=$(echo $g_hostname | sed 's/\..*$//')
-    oldrejects=$($IPTABLES -L -v -n | grep 'LOG')
+    oldrejects=$($g_tool -L -v -n | grep 'LOG')
 
     if [ $1 -lt 0 ]; then
 	timeout=$((- $1))
@@ -261,7 +276,7 @@ logwatch() # $1 = timeout -- if negative, prompt each time that
 
 	show_reset
 
-	rejects=$($IPTABLES -L -v -n | grep 'LOG')
+	rejects=$($g_tool -L -v -n | grep 'LOG')
 
 	if [ "$rejects" != "$oldrejects" ]; then
 	    oldrejects="$rejects"
@@ -357,11 +372,11 @@ save_config() {
     local result
     result=1
 
-    iptables_save=${IPTABLES}-save
+    iptables_save=${g_tool}-save
 
     [ -x $iptables_save ] || echo "$iptables-save does not exist or is not executable" >&2
 
-    if shorewall_is_started ; then
+    if product_is_started ; then
 	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
 
 	if [ -f $g_restorepath -a ! -x $g_restorepath ]; then
@@ -378,7 +393,7 @@ save_config() {
 	    esac
 	fi
     else
-	echo "Shorewall isn't started" >&2
+	echo "$g_product isn't started" >&2
     fi
 
     return 0
@@ -389,23 +404,23 @@ save_config() {
 # Show routing configuration
 #
 show_routing() {
-    if [ -n "$(ip rule list)" ]; then
+    if [ -n "$(ip -$g_family rule list)" ]; then
 	heading "Routing Rules"
-	ip rule list
-	ip rule list | while read rule; do
+	ip -$g_family rule list
+	ip -$g_family rule list | while read rule; do
 	    echo ${rule##* }
 	done | sort -u | while read table; do
 	    heading "Table $table:"
-	    ip route list table $table
+	    ip -$g_family route list table $table
 	done
 
 	if [ -n "$g_routecache" ]; then
 	    heading "Route Cache"
-	    ip -4 route list cache
+	    ip -$g_family route list cache
 	fi
     else
 	heading "Routing Table"
-	ip route list
+	ip -$g_family route list
     fi
 }
 
@@ -426,7 +441,11 @@ list_zone() {
 
     [ -n "$(mywhich ipset)" ] || fatal_error "The ipset utility cannot be located"
 
-    sets=$(ipset -L -n | grep '^$1_');
+    if [ $g_family -eq 4 ]; then
+	sets=$(ipset -L -n | grep '^$1_');
+     else
+	sets=$(ipset -L -n | grep "^6_$1_")
+    fi
 
     [ -n "$sets" ] || sets=$(find_sets $1)
 
@@ -440,7 +459,7 @@ list_zone() {
 }
 
 #
-# Show Filter - For Shorewall-lite, if there was an scfilter file at compile-time,
+# Show Filter - For Shorewall[6]-lite, if there was an scfilter file at compile-time,
 #               then the compiler generated another version of this function and
 #               embedded it in the firewall.conf file. That version supersedes this
 #               one.
@@ -566,26 +585,38 @@ show_command() {
 	connections)
 	    [ $# -gt 1 ] && usage 1
 
-	    if [ -d /proc/sys/net/netfilter/ ]; then
-		local count
-		local max
-		count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
-		max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
-		echo "$g_product $SHOREWALL_VERSION Connections ($count out of $max) at $g_hostname - $(date)"
-	    else
-		echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)"
-	    fi
-
-	    echo
-
-	    if qt mywhich conntrack ; then
-		conntrack -f ipv4 -L | show_connections_filter
-	    else
-		if [ -f /proc/net/ip_conntrack ]; then
-		    cat /proc/net/ip_conntrack | show_connections_filter
+	    if [ $g_family -eq 4 ]; then
+		if [ -d /proc/sys/net/netfilter/ ]; then
+		    local count
+		    local max
+		    count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+		    max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+		    echo "$g_product $SHOREWALL_VERSION Connections ($count out of $max) at $g_hostname - $(date)"
 		else
-		    grep -v '^ipv6' /proc/net/nf_conntrack | show_connections_filter
+		    echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)"
 		fi
+
+		echo
+
+		if qt mywhich conntrack ; then
+		    conntrack -f ipv${g_family} -L | show_connections_filter
+		else
+		    if [ -f /proc/net/ip_conntrack ]; then
+			cat /proc/net/ip_conntrack | show_connections_filter
+		    else
+			grep -v '^ipv6' /proc/net/nf_conntrack | show_connections_filter
+		    fi
+	        fi
+	    elif qt mywhich conntrack ; then
+		echo "$g_product $SHOREWALL_VERSION Connections at $g_hostname - $(date)"
+		echo
+		conntrack -f ipv6 -L | show_connections_filter
+	    else
+		local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
+		local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
+		echo "$g_product $SHOREWALL_VERSION Connections ($count of $max) at $g_hostname - $(date)"
+		echo
+		grep '^ipv6' /proc/net/nf_conntrack | sed -r 's/0000:/:/g; s/:::+/::/g; s/:0+/:/g' | show_connections_filter
 	    fi
 	    ;;
 	nat)
@@ -593,28 +624,28 @@ show_command() {
 	    echo "$g_product $SHOREWALL_VERSION NAT Table at $g_hostname - $(date)"
 	    echo
 	    show_reset
-	    $IPTABLES -t nat -L $g_ipt_options
+	    $g_tool -t nat -L $g_ipt_options
 	    ;;
 	raw)
 	    [ $# -gt 1 ] && usage 1
 	    echo "$g_product $SHOREWALL_VERSION RAW Table at $g_hostname - $(date)"
 	    echo
 	    show_reset
-	    $IPTABLES -t raw -L $g_ipt_options
+	    $g_tool-t raw -L $g_ipt_options
 	    ;;
 	rawpost)
 	    [ $# -gt 1 ] && usage 1
 	    echo "$g_product $SHOREWALL_VERSION RAWPOST Table at $g_hostname - $(date)"
 	    echo
 	    show_reset
-	    $IPTABLES -t rawpost -L $g_ipt_options
+	    $g_tool -t rawpost -L $g_ipt_options
 	    ;;
 	tos|mangle)
 	    [ $# -gt 1 ] && usage 1
 	    echo "$g_product $SHOREWALL_VERSION Mangle Table at $g_hostname - $(date)"
 	    echo
 	    show_reset
-	    $IPTABLES -t mangle -L $g_ipt_options
+	    $g_tool -t mangle -L $g_ipt_options
 	    ;;
 	log)
 	    [ $# -gt 2 ] && usage 1
@@ -650,7 +681,7 @@ show_command() {
 	    shift
 
 	    if [ -z "$1" ]; then
-		$IPTABLES -t mangle -L -n -v
+		$g_tool -t mangle -L -n -v
 		echo
 	    fi
 
@@ -700,7 +731,7 @@ show_command() {
 	    [ $# -gt 1 ] && usage 1
 	    echo "$g_product $SHOREWALL_VERSION IP at $g_hostname - $(date)"
 	    echo
-	    ip -4 addr list
+	    ip -$g_family addr list
 	    ;;
 	routing)
 	    [ $# -gt 1 ] && usage 1
@@ -729,11 +760,11 @@ show_command() {
 	    show_reset
 	    if [ $# -gt 0 ]; then
 		for chain in $*; do
-		    $IPTABLES -t $table -L $chain $g_ipt_options
+		    $g_tool -t $table -L $chain $g_ipt_options
 		    echo
 		done
 	    else
-		$IPTABLES -t $table -L $g_ipt_options
+		$g_tool -t $table -L $g_ipt_options
 	    fi
 	    ;;
 	vardir)
@@ -746,6 +777,7 @@ show_command() {
 	    [ -f ${VARDIR}/policies ] && cat ${VARDIR}/policies;
 	    ;;
 	ipa)
+	    [ $g_family -eq 4 ] && usage 1
 	    echo "$g_product $SHOREWALL_VERSION per-IP Accounting at $g_hostname - $(date)"
 	    echo
 	    [ $# -gt 1 ] && usage 1
@@ -758,69 +790,72 @@ show_command() {
 	    [ -f ${VARDIR}/marks ] && cat ${VARDIR}/marks;
 	    ;;
 	*)
-	    if [ "$g_product" = Shorewall ]; then
-		case $1 in
-		    actions)
-			[ $# -gt 1 ] && usage 1
-			echo "A_ACCEPT            # Audit and accept the connection"
-			echo "A_DROP              # Audit and drop the connection"
-			echo "A_REJECT            # Audit and reject the connection "
-			echo "allowBcast          # Silently Allow Broadcast/multicast"
-			echo "allowInvalid        # Accept packets that are in the INVALID conntrack state."
-			echo "allowinUPnP         # Allow UPnP inbound (to firewall) traffic"
-			echo "allowoutUPnP        # Allow traffic from local command 'upnpd' (does not work with kernels after 2.6.13)"
-			echo "dropBcast           # Silently Drop Broadcast/multicast"
-			echo "dropInvalid         # Silently Drop packets that are in the INVALID conntrack state"
-			echo "dropNotSyn          # Silently Drop Non-syn TCP packets"
-			echo "forwardUPnP         # Allow traffic that upnpd has redirected from"
-			echo "rejNotSyn           # Silently Reject Non-syn TCP packets"
+	    case "$g_product" in
+		*lite)
+		    ;;
+	    	*)
+		    case $1 in
+			actions)
+			    [ $# -gt 1 ] && usage 1
+			    echo "A_ACCEPT            # Audit and accept the connection"
+			    echo "A_DROP              # Audit and drop the connection"
+			    echo "A_REJECT            # Audit and reject the connection "
+			    echo "allowBcast          # Silently Allow Broadcast/multicast"
+			    echo "allowInvalid        # Accept packets that are in the INVALID conntrack state."
+			    echo "allowinUPnP         # Allow UPnP inbound (to firewall) traffic"
+			    echo "allowoutUPnP        # Allow traffic from local command 'upnpd' (does not work with kernels after 2.6.13)"
+			    echo "dropBcast           # Silently Drop Broadcast/multicast"
+			    echo "dropInvalid         # Silently Drop packets that are in the INVALID conntrack state"
+			    echo "dropNotSyn          # Silently Drop Non-syn TCP packets"
+			    echo "forwardUPnP         # Allow traffic that upnpd has redirected from"
+			    echo "rejNotSyn           # Silently Reject Non-syn TCP packets"
 
-			if [ -f ${CONFDIR}/actions ]; then
-			    cat ${SHAREDIR}/actions.std ${CONFDIR}/actions | grep -Ev '^\#|^$'
-			else
-			    grep -Ev '^\#|^$' ${SHAREDIR}/actions.std
-			fi
-
-			return
-			;;
-		    macro)
-			[ $# -ne 2 ] && usage 1
-			for directory in $(split $CONFIG_PATH); do
-			    if [ -f ${directory}/macro.$2 ]; then
-				echo "Shorewall $SHOREWALL_VERSION Macro $2 at $g_hostname - $(date)"
-				cat ${directory}/macro.$2
-				return
+			    if [ -f ${CONFDIR}/actions ]; then
+				cat ${SHAREDIR}/actions.std ${CONFDIR}/actions | grep -Ev '^\#|^$'
+			    else
+				grep -Ev '^\#|^$' ${SHAREDIR}/actions.std
 			    fi
-			done
-			echo "   WARNING: Macro $2 not found" >&2
-			return
-			;;
-		    macros)
-			[ $# -gt 1 ] && usage 1
 
-			for directory in $(split $CONFIG_PATH); do
-			    temp=
-			    for macro in ${directory}/macro.*; do
-				case $macro in
-				    *\*)
-                                        ;;
-				    *)
-				        if [ -z "$temp" ]; then
-					    echo
-					    echo "Macros in $directory:"
-					    echo
-					    temp=Yes
-					fi
-					show_macro
-					;;
-				esac
+			    return
+			    ;;
+			macro)
+			    [ $# -ne 2 ] && usage 1
+			    for directory in $(split $CONFIG_PATH); do
+				if [ -f ${directory}/macro.$2 ]; then
+				    echo "Shorewall $SHOREWALL_VERSION Macro $2 at $g_hostname - $(date)"
+				    cat ${directory}/macro.$2
+				    return
+				fi
 			    done
-			done
-			return
-			;;
-		esac
-	    fi
+			    echo "   WARNING: Macro $2 not found" >&2
+			    return
+			    ;;
+			macros)
+			    [ $# -gt 1 ] && usage 1
 
+			    for directory in $(split $CONFIG_PATH); do
+				temp=
+				for macro in ${directory}/macro.*; do
+				    case $macro in
+					*\*)
+                                            ;;
+					*)
+				            if [ -z "$temp" ]; then
+						echo
+						echo "Macros in $directory:"
+						echo
+						temp=Yes
+					    fi
+					    show_macro
+					    ;;
+				    esac
+				done
+			    done
+			    return
+			    ;;
+		    esac
+		    ;;
+	    esac
 
 	    if [ $# -gt 0 ]; then
 		if [ $1 = dynamic -a $# -gt 1 ]; then
@@ -831,8 +866,8 @@ show_command() {
                 fi
 
 		[ -n "$table_given" ] || for chain in $*; do
-		    if ! qt $IPTABLES -t $table -L $chain $g_ipt_options; then
-			error_message "ERROR: Chain '$chain' is not recognized by $IPTABLES."
+		    if ! qt $g_tool -t $table -L $chain $g_ipt_options; then
+			error_message "ERROR: Chain '$chain' is not recognized by $g_tool."
 			exit 1
 		    fi
 		done
@@ -841,14 +876,14 @@ show_command() {
 		echo
 		show_reset
 		for chain in $*; do
-		    $IPTABLES -t $table -L $chain $g_ipt_options
+		    $g_tool -t $table -L $chain $g_ipt_options
 		    echo
 		done
 	    else
 		echo "$g_product $SHOREWALL_VERSION $table Table at $g_hostname - $(date)"
 		echo
 		show_reset
-		$IPTABLES -t $table -L $g_ipt_options
+		$g_tool -t $table -L $g_ipt_options
 	    fi
 	    ;;
     esac
@@ -976,41 +1011,51 @@ do_dump_command() {
     echo "$g_product $SHOREWALL_VERSION Dump at $g_hostname - $(date)"
     echo
 
+    if [ $g_family -eq 6 ] && [ -f /usr/share/shorewall/version ]; then
+	echo "   Shorewall $(cat /usr/share/shorewall/version)"
+	echo
+    fi
+    
     show_reset
     host=$(echo $g_hostname | sed 's/\..*$//')
-    $IPTABLES -L $g_ipt_options
+    $g_tool -L $g_ipt_options
 
     heading "Log ($LOGFILE)"
     packet_log 20
 
-    if qt $IPTABLES -t nat -L -n; then
+    if qt $g_tool -t nat -L -n; then
 	heading "NAT Table"
-	$IPTABLES -t nat -L $g_ipt_options
+	$g_tool -t nat -L $g_ipt_options
     fi
 
-    if qt $IPTABLES -t mangle -L -n; then
+    if qt $g_tool -t mangle -L -n; then
 	heading "Mangle Table"
-	$IPTABLES -t mangle -L $g_ipt_options
+	$g_tool -t mangle -L $g_ipt_options
     fi
 
-    if qt $IPTABLES -t raw -L -n; then
+    if qt $g_tool -t raw -L -n; then
 	heading "Raw Table"
-	$IPTABLES -t raw -L $g_ipt_options
+	$g_tool -t raw -L $g_ipt_options
     fi
 
-    if qt $IPTABLES -t rawpost -L -n; then
+    if qt $g_tool -t rawpost -L -n; then
 	heading "Rawpost Table"
-	$IPTABLES -t rawpost -L $g_ipt_options
+	$g_tool -t rawpost -L $g_ipt_options
     fi
 
     local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
     local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
 
     heading "Conntrack Table ($count out of $max)"
-    [ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
+
+    if [ $g_family -eq 4 ]; then
+    	[ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || grep -v '^ipv6' /proc/net/nf_conntrack
+    else
+	grep '^ipv6' /proc/net/nf_conntrack
+    fi
 
     heading "IP Configuration"
-    ip -4 addr list
+    ip -$g_family addr list
 
     heading "IP Stats"
     ip -stat link list
@@ -1020,9 +1065,11 @@ do_dump_command() {
 	brctl show
     fi
 
-    heading "Per-IP Counters"
+    if [ $g_family -eq 4 ]; then
+	heading "Per-IP Counters"
 
-    perip_accounting
+	perip_accounting
+    fi
 
     if qt mywhich setkey; then
 	heading "PFKEY SPD"
@@ -1033,23 +1080,42 @@ do_dump_command() {
 
     heading "/proc"
     show_proc /proc/version
-    show_proc /proc/sys/net/ipv4/ip_forward
-    show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all
 
-    for directory in /proc/sys/net/ipv4/conf/*; do
-	for file in proxy_arp arp_filter arp_ignore rp_filter log_martians; do
-	    show_proc $directory/$file
+    if [ $g_family -eq 4 ]; then
+	show_proc /proc/sys/net/ipv4/ip_forward
+	show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all
+
+	for directory in /proc/sys/net/ipv4/conf/*; do
+	    for file in proxy_arp arp_filter arp_ignore rp_filter log_martians; do
+		show_proc $directory/$file
+	    done
 	done
-    done
+    else
+	for directory in /proc/sys/net/ipv6/conf/*; do
+	    for file in forwarding proxy_ra proxy_ndp; do
+		show_proc $directory/$file
+	    done
+	done
+    fi
 
     show_routing
 
-    heading "ARP"
-    arp -na
+    if [ $g_family -eq 4 ]; then
+	heading "ARP"
+	arp -na
+    else
+	heading "Neighbors"
+	ip -6 neigh ls
+    fi
 
     if qt mywhich lsmod; then
 	heading "Modules"
-	lsmod | grep -E '^(ip_|ipt_|iptable_|nf_|xt_)' | sort
+
+	if [ $g_family -eq 4 ]; then
+	    lsmod | grep -E '^(ip_|ipt_|iptable_|nf_|xt_)' | sort
+	else
+	    lsmod | grep -E '^(x_|ip6|nf_|xt_)' | sort
+	fi
     fi
 
     determine_capabilities
@@ -1057,7 +1123,7 @@ do_dump_command() {
     report_capabilities
 
     echo
-    netstat -tunap
+    netstat -${g_family}tunap
 
     if [ -n "$TC_ENABLED" ]; then
 	heading "Traffic Control"
@@ -1129,7 +1195,7 @@ restore_command() {
     [ -n "$nolock" ] || mutex_on
 
     if [ -x $g_restorepath ]; then
-	progress_message3 "Restoring Shorewall..."
+	progress_message3 "Restoring $g_product..."
 
 	run_it $g_restorepath restore && progress_message3 "$g_product restored from ${VARDIR}/$RESTOREFILE"
 
@@ -1253,18 +1319,18 @@ block() # $1 = command, $2 = Finished, $3 - $n addresses
 		continue
 		;;
 	    *-*)
-		qt $IPTABLES -D dynamic -m iprange $range $1 -j reject
-		qt $IPTABLES -D dynamic -m iprange $range  $1 -j DROP
-		qt $IPTABLES -D dynamic -m iprange $range $1 -j logreject
-		qt $IPTABLES -D dynamic -m iprange $range $1 -j logdrop
-		$IPTABLES -A dynamic -m iprange $range $1 -j $chain || break 1
+		qt $g_tool -D dynamic -m iprange $range $1 -j reject
+		qt $g_tool -D dynamic -m iprange $range  $1 -j DROP
+		qt $g_tool -D dynamic -m iprange $range $1 -j logreject
+		qt $g_tool -D dynamic -m iprange $range $1 -j logdrop
+		$g_tool -A dynamic -m iprange $range $1 -j $chain || break 1
 		;;
 	    *)
-		qt $IPTABLES -D dynamic $which $1 -j reject
-		qt $IPTABLES -D dynamic $which $1 -j DROP
-		qt $IPTABLES -D dynamic $which $1 -j logreject
-		qt $IPTABLES -D dynamic $which $1 -j logdrop
-		$IPTABLES -A dynamic $which $1 -j $chain || break 1
+		qt $g_tool -D dynamic $which $1 -j reject
+		qt $g_tool -D dynamic $which $1 -j DROP
+		qt $g_tool -D dynamic $which $1 -j logreject
+		qt $g_tool -D dynamic $which $1 -j logdrop
+		$g_tool -A dynamic $which $1 -j $chain || break 1
 		;;
 	esac
 
@@ -1346,8 +1412,8 @@ separate_list() {
 #
 add_command() {
     local interface host hostlist zone ipset
-    if ! shorewall_is_started ; then
-	echo "Shorewall Not Started" >&2
+    if ! product_is_started ; then
+	echo "$g_product Not Started" >&2
 	exit 2
     fi
 
@@ -1367,7 +1433,11 @@ add_command() {
 	[ "$host" = "$1" ] && host=
 
 	if [ -z "$host" ]; then
-	    hostlist="$hostlist $interface:0.0.0.0/0"
+	    if [ $g_family -eq 4 ]; then
+	        hostlist="$hostlist $interface:0.0.0.0/0"
+	    else
+		hostlist="$hostlist $interface:::/0"
+	    fi
 	else
 	    for h in $(separate_list $host); do
 		hostlist="$hostlist $interface:$h"
@@ -1380,9 +1450,13 @@ add_command() {
     zone=$1
 
     for host in $hostlist; do
-	interface=${host%:*}
-
-	ipset=${zone}_${interface};
+	if [ $g_family -eq 4 ]; then
+	    interface=${host%:*}
+	    ipset=${zone}_${interface};
+	else
+	    interface=${host%%:*}
+	    ipset=6_${zone}_${interface};
+	fi
 
 	if ! qt $IPSET -L $ipset -n; then
 	    fatal_error "Zone $zone, interface $interface is does not have a dynamic host list"
@@ -1404,8 +1478,8 @@ add_command() {
 #
 delete_command() {
     local interface host hostent hostlist zone ipset
-    if ! shorewall_is_started ; then
-	echo "Shorewall Not Started" >&2
+    if ! product_is_started ; then
+	echo "$g_product Not Started" >&2
 	exit 2;
     fi
 
@@ -1426,7 +1500,11 @@ delete_command() {
 	[ "$host" = "$1" ] && host=
 
 	if [ -z "$host" ]; then
-	    hostlist="$hostlist $interface:0.0.0.0/0"
+	    if [ $g_family -eq 4 ]; then
+		hostlist="$hostlist $interface:0.0.0.0/0"
+	    else
+		hostlist="$hostlist $interface:::/0"
+	    fi
 	else
 	    for h in $(separate_list $host); do
 		hostlist="$hostlist $interface:$h"
@@ -1439,9 +1517,13 @@ delete_command() {
     zone=$1
 
     for hostent in $hostlist; do
-	interface=${hostent%:*}
-
-	ipset=${zone}_${interface};
+	if [ $g_family -eq 4 ]; then
+	    interface=${hostent%:*}
+	    ipset=${zone}_${interface};
+	else
+	    interface=${hostent%%:*}
+	    ipset=6_${zone}_${interface};
+	fi
 
 	if ! qt $IPSET -L $ipset -n; then
 	    fatal_error "Zone $zone, interface $interface is does not have a dynamic host list"
@@ -1450,7 +1532,7 @@ delete_command() {
 	host=${hostent#*:}
 
 	if $IPSET -D $ipset $host; then
-	    echo "Host $hostend deleted from zone $zone"
+	    echo "Host $hostent deleted from zone $zone"
 	else
 	    echo "   WARNING: Unable to delete host $hostent to zone $zone" >&2
 	fi
@@ -1554,7 +1636,7 @@ hits_command() {
 allow_command() {
     [ -n "$g_debugging" ] && set -x
     [ $# -eq 1 ] && usage 1
-    if shorewall_is_started ; then
+    if product_is_started ; then
 	local which
 	which='-s'
 	local range
@@ -1580,10 +1662,10 @@ allow_command() {
 		    continue
 		    ;;
 		*-*)
-		    if  qt $IPTABLES -D dynamic -m iprange $range $1 -j reject    ||\
-			qt $IPTABLES -D dynamic -m iprange $range $1 -j DROP      ||\
-			qt $IPTABLES -D dynamic -m iprange $range $1 -j logdrop   ||\
-			qt $IPTABLES -D dynamic -m iprange $range $1 -j logreject
+		    if  qt $g_tool -D dynamic -m iprange $range $1 -j reject    ||\
+			qt $g_tool -D dynamic -m iprange $range $1 -j DROP      ||\
+			qt $g_tool -D dynamic -m iprange $range $1 -j logdrop   ||\
+			qt $g_tool -D dynamic -m iprange $range $1 -j logreject
 			then
 			echo "$1 Allowed"
 		    else
@@ -1591,10 +1673,10 @@ allow_command() {
 		    fi
 		    ;;
 		*)
-		    if  qt $IPTABLES -D dynamic $which $1 -j reject    ||\
-			qt $IPTABLES -D dynamic $which $1 -j DROP      ||\
-			qt $IPTABLES -D dynamic $which $1 -j logdrop   ||\
-			qt $IPTABLES -D dynamic $which $1 -j logreject
+		    if  qt $g_tool -D dynamic $which $1 -j reject    ||\
+			qt $g_tool -D dynamic $which $1 -j DROP      ||\
+			qt $g_tool -D dynamic $which $1 -j logdrop   ||\
+			qt $g_tool -D dynamic $which $1 -j logreject
 			then
 			echo "$1 Allowed"
 		    else
@@ -1671,7 +1753,7 @@ logwatch_command() {
 #
 # Determine which optional facilities are supported by iptables/netfilter
 #
-determine_capabilities() {
+determine_4_capabilities() {
     [ -n "$IPTABLES" ] || IPTABLES=$(mywhich iptables)
 
     if [ -z "$IPTABLES" ]; then
@@ -1924,6 +2006,253 @@ determine_capabilities() {
     esac
 }
 
+determine_6_capabilities() {
+    CONNTRACK_MATCH=
+    NEW_CONNTRACK_MATCH=
+    OLD_CONNTRACK_MATCH=
+    MULTIPORT=
+    XMULTIPORT=
+    POLICY_MATCH=
+    PHYSDEV_MATCH=
+    PHYSDEV_BRIDGE=
+    IPRANGE_MATCH=
+    RECENT_MATCH=
+    OWNER_MATCH=
+    IPSET_MATCH=
+    OLD_IPSET_MATCH=
+    IPSET_V5=
+    CONNMARK=
+    XCONNMARK=
+    CONNMARK_MATCH=
+    XCONNMARK_MATCH=
+    RAW_TABLE=
+    RAWPOST_TABLE=
+    IPP2P_MATCH=
+    OLD_IPP2P_MATCH=
+    LENGTH_MATCH=
+    CLASSIFY_TARGET=
+    ENHANCED_REJECT=
+    USEPKTTYPE=
+    KLUDGEFREE=
+    MARK=
+    XMARK=
+    EXMARK=
+    TPROXY_TARGET=
+    MANGLE_FORWARD=
+    COMMENTS=
+    ADDRTYPE=
+    TCPMSS_MATCH=
+    HASHLIMIT_MATCH=
+    NFQUEUE_TARGET=
+    REALM_MATCH=
+    HELPER_MATCH=
+    CONNLIMIT_MATCH=
+    TIME_MATCH=
+    GOTO_TARGET=
+    IPMARK_TARGET=
+    LOG_TARGET=Yes
+    ULOG_TARGET=
+    NFLOG_TARGET=
+    LOGMARK_TARGET=
+    FLOW_FILTER=
+    FWMARK_RT_MASK=
+    MARK_ANYWHERE=
+    HEADER_MATCH=
+    ACCOUNT_TARGET=
+    AUDIT_TARGET=
+    IPSET_V5=
+    CONDITION_MATCH=
+    IPTABLES_S=
+    BASIC_FILTER=
+
+    chain=fooX$$
+
+    [ -n "$IP6TABLES" ] || IP6TABLES=$(mywhich ip6tables)
+
+    if [ -z "$IP6TABLES" ]; then
+	echo "   ERROR: No executable iptables binary can be found on your PATH" >&2
+	exit 1
+    fi
+
+    [ -n "$IP" ] || IP=$(which ip)
+
+    [ -n "$IP" -a -x "$IP" ] || IP=
+
+    [ "$TC" = tc -o -z "$TC" ] && TC=$(which tc)
+
+    [ -n "$TC" -a -x "$TC" ] || TC=
+
+    qt $IP6TABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED=
+
+    qt $IP6TABLES -F $chain
+    qt $IP6TABLES -X $chain
+    if ! $IP6TABLES -N $chain; then
+	echo "   ERROR: The command \"$IP6TABLES -N $chain\" failed" >&2
+	exit 1
+    fi
+
+    chain1=${chain}1
+
+    qt $IP6TABLES -F $chain1
+    qt $IP6TABLES -X $chain1
+    if ! $IP6TABLES -N $chain1; then
+	echo "   ERROR: The command \"$IP6TABLES -N $chain1\" failed" >&2
+	exit 1
+    fi
+
+    if ! qt $IP6TABLES -A $chain -m state --state ESTABLISHED,RELATED -j ACCEPT &&
+       ! qt $IP6TABLES -A $chain -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT; then
+	echo "   ERROR: Your kernel lacks connection tracking and/or state matching -- Shorewall will not run on this system" >&2
+	exit 1
+    fi
+
+    qt $IP6TABLES -A $chain -m conntrack --ctorigdst ::1 -j ACCEPT && CONNTRACK_MATCH=Yes
+
+    if [ -n "$CONNTRACK_MATCH" ]; then
+	qt $IP6TABLES -A $chain -m conntrack -p tcp --ctorigdstport 22 -j ACCEPT && NEW_CONNTRACK_MATCH=Yes
+	qt $IP6TABLES -A $chain -m conntrack ! --ctorigdst ::1 || OLD_CONNTRACK_MATCH=Yes
+    fi
+
+    if qt $IP6TABLES -A $chain -p tcp -m multiport --dports 21,22 -j ACCEPT; then
+	MULTIPORT=Yes
+	qt $IP6TABLES -A $chain -p tcp -m multiport --sports 60 -m multiport --dports 99 -j ACCEPT && KLUDEFREE=Yes
+    fi
+
+    qt $IP6TABLES -A $chain -p tcp -m multiport --dports 21:22 -j ACCEPT           && XMULTIPORT=Yes
+    qt $IP6TABLES -A $chain -m policy --pol ipsec --mode tunnel --dir in -j ACCEPT && POLICY_MATCH=Yes
+
+    if qt $IP6TABLES -A $chain -m physdev --physdev-out eth0 -j ACCEPT; then
+	PHYSDEV_MATCH=Yes
+	qt $IP6TABLES -A $chain -m physdev --physdev-is-bridged --physdev-in eth0 --physdev-out eth0 -j ACCEPT && PHYSDEV_BRIDGE=Yes
+	if [ -z "${KLUDGEFREE}" ]; then
+	    qt $IP6TABLES -A $chain -m physdev --physdev-in eth0 -m physdev --physdev-out eth0 -j ACCEPT && KLUDGEFREE=Yes
+	fi
+    fi
+
+    if qt $IP6TABLES -A $chain -m iprange --src-range ::1-::2 -j ACCEPT; then
+	IPRANGE_MATCH=Yes
+	if [ -z "${KLUDGEFREE}" ]; then
+	    qt $IP6TABLES -A $chain -m iprange --src-range ::1-::2 -m iprange --dst-range ::1-::2 -j ACCEPT && KLUDGEFREE=Yes
+	fi
+    fi
+
+    qt $IP6TABLES -A $chain -m recent --update -j ACCEPT     && RECENT_MATCH=Yes
+    qt $IP6TABLES -A $chain -m owner --uid-owner 0 -j ACCEPT && OWNER_MATCH=Yes
+
+    if qt $IP6TABLES -A $chain -m connmark --mark 2  -j ACCEPT; then
+	CONNMARK_MATCH=Yes
+	qt $IP6TABLES -A $chain -m connmark --mark 2/0xFF -j ACCEPT && XCONNMARK_MATCH=Yes
+    fi
+
+    qt $IP6TABLES -A $chain -p tcp -m ipp2p --edk -j ACCEPT       && IPP2P_MATCH=Yes
+    if [ -n "$IPP2P_MATCH" ]; then
+	qt $IP6TABLES -A $chain -p tcp -m ipp2p --ipp2p -j ACCEPT && OLD_IPP2P_MATCH=Yes
+    fi
+
+   qt $IP6TABLES -A $chain -m length --length 10:20 -j ACCEPT           && LENGTH_MATCH=Yes
+    qt $IP6TABLES -A $chain -j REJECT --reject-with icmp6-adm-prohibited && ENHANCED_REJECT=Yes
+
+    qt $IP6TABLES -A $chain -j ACCEPT -m comment --comment "This is a comment" && COMMENTS=Yes
+
+    if [ -n "$MANGLE_ENABLED" ]; then
+	qt $IP6TABLES -t mangle -N $chain
+
+	if qt $IP6TABLES -t mangle -A $chain -j MARK --set-mark 1; then
+	    MARK=Yes
+	    qt $IP6TABLES -t mangle -A $chain -j MARK --and-mark 0xFF && XMARK=Yes
+	    qt $IP6TABLES -t mangle -A $chain -j MARK --set-mark 1/0xFF && EXMARK=Yes
+	fi
+
+	if qt $IP6TABLES -t mangle -A $chain -j CONNMARK --save-mark; then
+	    CONNMARK=Yes
+	    qt $IP6TABLES -t mangle -A $chain -j CONNMARK --save-mark --mask 0xFF && XCONNMARK=Yes
+	fi
+
+	qt $IP6TABLES -t mangle -A $chain -j CLASSIFY --set-class 1:1 && CLASSIFY_TARGET=Yes
+	qt $IP6TABLES -t mangle -A $chain -j IPMARK --addr src && IPMARK_TARGET=Yes
+	qt $IP6TABLES -t mangle -A $chain -p tcp -j TPROXY --on-port 0 --tproxy-mark 1 && TPROXY_TARGET=Yes
+	qt $IP6TABLES -t mangle -F $chain
+	qt $IP6TABLES -t mangle -X $chain
+	qt $IP6TABLES -t mangle -L FORWARD -n && MANGLE_FORWARD=Yes
+    fi
+
+    qt $IP6TABLES -t raw	   -L -n && RAW_TABLE=Yes
+    qt $IP6TABLES -t rawpost	   -L -n && RAWPOST_TABLE=Yes
+
+    if qt mywhich ipset; then
+	qt ipset -X $chain # Just in case something went wrong the last time
+
+	if qt ipset -N $chain hash:ip family inet6; then
+	    IPSET_V5=Yes
+	    if qt $IP6TABLES -A $chain -m set --match-set $chain src -j ACCEPT; then
+		qt $IP6TABLES -D $chain -m set --match-set $chain src -j ACCEPT
+		IPSET_MATCH=Yes
+	    elif qt $IP6TABLES -A $chain -m set --set $chain src -j ACCEPT; then
+		qt $IP6TABLES -D $chain -m set --set $chain src -j ACCEPT
+		IPSET_MATCH=Yes
+		OLD_IPSET_MATCH=Yes
+	    fi
+	    qt ipset -X $chain
+	fi
+    fi
+
+    qt $IP6TABLES -A $chain -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes
+    qt $IP6TABLES -A $chain -m addrtype --src-type BROADCAST -j ACCEPT && ADDRTYPE=Yes
+    qt $IP6TABLES -A $chain -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT && TCPMSS_MATCH=Yes
+    qt $IP6TABLES -A $chain -m hashlimit --hashlimit-upto 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && HASHLIMIT_MATCH=Yes
+    if [ -z "$HASHLIMIT_MATCH" ]; then
+	qt $IP6TABLES -A $chain -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name $chain --hashlimit-mode dstip -j ACCEPT && OLD_HL_MATCH=Yes
+	HASHLIMIT_MATCH=$OLD_HL_MATCH
+    fi	
+    qt $IP6TABLES -A $chain -j NFQUEUE --queue-num 4 && NFQUEUE_TARGET=Yes
+    qt $IP6TABLES -A $chain -m realm --realm 4 && REALM_MATCH=Yes
+    qt $IP6TABLES -A $chain -m helper --helper "ftp" && HELPER_MATCH=Yes
+    qt $IP6TABLES -A $chain -m connlimit --connlimit-above 8 -j DROP && CONNLIMIT_MATCH=Yes
+    qt $IP6TABLES -A $chain -m time --timestart 23:00 -j DROP && TIME_MATCH=Yes
+    qt $IP6TABLES -A $chain -g $chain1 && GOTO_TARGET=Yes
+    qt $IP6TABLES -A $chain -j LOGMARK && LOGMARK_TARGET=Yes
+    qt $IP6TABLES -A $chain -j LOG || LOG_TARGET=
+    qt $IP6TABLES -A $chain -j ULOG && ULOG_TARGET=Yes
+    qt $IP6TABLES -A $chain -j NFLOG && NFLOG_TARGET=Yes
+    qt $IP6TABLES -A $chain -j MARK --set-mark 5 && MARK_ANYWHERE=Yes
+    qt $IP6TABLES -A $chain -m ipv6header --header 255 && HEADER_MATCH=Yes
+    qt $IP6TABLES -A $chain -j ACCOUNT --addr 1::/122 --tname $chain && ACCOUNT_TARGET=Yes
+    qt $IP6TABLES -A $chain -j AUDIT --type drop && AUDIT_TARGET=Yes
+    qt $IP6TABLES -A $chain -m condition --condition foo && CONDITION_MATCH=Yes
+    qt $IP6TABLES -S INPUT && IPTABLES_S=Yes
+    
+
+    qt $IP6TABLES -F $chain
+    qt $IP6TABLES -X $chain
+    qt $IP6TABLES -F $chain1
+    qt $IP6TABLES -X $chain1
+
+    [ -n "$TC" ] && $TC filter add flow help 2>&1 | grep -q ^Usage && FLOW_FILTER=Yes
+    [ -n "$TC" ] && $TC filter add basic help 2>&1 | grep -q ^Usage && BASIC_FILTER=Yes
+    [ -n "$IP" ] && $IP rule add help 2>&1 | grep -q /MASK && FWMARK_RT_MASK=Yes
+
+    CAPVERSION=$SHOREWALL_CAPVERSION
+
+    KERNELVERSION=$(uname -r 2> /dev/null | sed -e 's/-.*//')
+
+    case "$KERNELVERSION" in 
+	*.*.*)
+	    KERNELVERSION=$(printf "%d%02d%02d" $(echo $KERNELVERSION | sed -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2 \3/g'))
+	    ;;
+	*)
+	    KERNELVERSION=$(printf "%d%02d00" $(echo $KERNELVERSION | sed -e 's/^\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1 \2/g'))
+	    ;;
+    esac
+}
+
+determine_capabilities() {
+    if [ $g_family -eq 4 ]; then
+	determine_4_capabilities
+    else
+	determine_6_capabilities;
+    fi
+}
+
 report_capabilities() {
     report_capability() # $1 = Capability Description , $2 Capability Setting (if any)
     {
@@ -1936,7 +2265,7 @@ report_capabilities() {
     }
 
     if [ $VERBOSITY -gt 1 ]; then
-	echo "Shorewall has detected the following iptables/netfilter capabilities:"
+	echo "$g_product has detected the following iptables/netfilter capabilities:"
 	report_capability "NAT" $NAT_ENABLED
 	report_capability "Packet Mangling" $MANGLE_ENABLED
 	report_capability "Multi-port Match" $MULTIPORT
@@ -1999,7 +2328,13 @@ report_capabilities() {
 	report_capability "AUDIT Target" $AUDIT_TARGET
 	report_capability "ipset V5" $IPSET_V5
 	report_capability "Condition Match" $CONDITION_MATCH
-	report_capability "iptables -S" $IPTABLES_S
+	
+	if [ $g_family -eq 4 ]; then
+	    report_capability "iptables -S" $IPTABLES_S
+	else
+	    report_capability "ip6tables -S" $IPTABLES_S
+	fi
+
 	report_capability "Basic Filter" $BASIC_FILTER
     fi
 
@@ -2014,7 +2349,7 @@ report_capabilities1() {
     }
 
     echo "#"
-    echo "# Shorewall $SHOREWALL_VERSION detected the following iptables/netfilter capabilities - $(date)"
+    echo "# $g_product $SHOREWALL_VERSION detected the following iptables/netfilter capabilities - $(date)"
     echo "#"
     report_capability1 NAT_ENABLED
     report_capability1 MANGLE_ENABLED
diff --git a/Shorewall/shorewall b/Shorewall/shorewall
index 1dd369f02..47e098625 100755
--- a/Shorewall/shorewall
+++ b/Shorewall/shorewall
@@ -24,11 +24,11 @@
 #	along with this program; if not, write to the Free Software
 #	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#       For a list of supported commands, type 'shorewall help'
+#       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
 #
 ################################################################################################
 #
-# Set the configuration variables from shorewall.conf
+# Set the configuration variables from the .conf file
 #
 #     $1 = Yes: read the params file
 #     $2 = Yes: check for STARTUP_ENABLED
@@ -47,7 +47,7 @@ get_config() {
 	fi
     fi
 
-    config=$(find_file shorewall.conf)
+    config=$(find_file $g_program.conf)
 
     if [ -f $config ]; then
 	if [ -r $config ]; then
@@ -80,17 +80,36 @@ get_config() {
 	    fi
 	fi
 
-	if [ -n "$IPTABLES" ]; then
-	    if [ ! -x "$IPTABLES" ]; then
-		echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
-		exit 2
+	if [ $g_family -eq 4 ]; then
+	    if [ -n "$IPTABLES" ]; then
+		if [ ! -x "$IPTABLES" ]; then
+		    echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
+		    exit 2
+		fi
+	    else
+		IPTABLES=$(mywhich iptables 2> /dev/null)
+		if [ -z "$IPTABLES" ] ; then
+		    echo "   ERROR: Can't find iptables executable" >&2
+		    exit 2
+		fi
 	    fi
+	    
+	    g_tool=$IPTABLES
 	else
-	    IPTABLES=$(mywhich iptables 2> /dev/null)
-	    if [ -z "$IPTABLES" ] ; then
-		echo "   ERROR: Can't find iptables executable" >&2
-		exit 2
+	    if [ -n "$IP6TABLES" ]; then
+		if [ ! -x "$IP6TABLES" ]; then
+		    echo "   ERROR: The program specified in IP6TABLES does not exist or is not executable" >&2
+		    exit 2
+		fi
+	    else
+		IP6TABLES=$(mywhich ip6tables 2> /dev/null)
+		if [ -z "$IP6TABLES" ] ; then
+		    echo "   ERROR: Can't find ip6tables executable" >&2
+		    exit 2
+		fi
 	    fi
+
+	    g_tool=$IP6TABLES
 	fi
 
 	if [ -n "$IP" ]; then
@@ -165,7 +184,7 @@ get_config() {
 	if [ "$2" = Yes ]; then
 	    case $STARTUP_ENABLED in
 		No|no|NO)
-		    echo "   ERROR: Shorewall startup is disabled. To enable startup, set STARTUP_ENABLED=Yes in ${CONFDIR}/shorewall.conf" >&2
+		    echo "   ERROR: $g_product startup is disabled. To enable startup, set STARTUP_ENABLED=Yes in ${CONFDIR}/${g_program}.conf" >&2
 		    exit 2
 		    ;;
 		Yes|yes|YES)
@@ -358,8 +377,8 @@ compiler() {
     pc=$g_libexec/shorewall/compiler.pl
 
     if [ $(id -u) -ne 0 ]; then
-	if [ -z "$SHOREWALL_DIR" -o "$SHOREWALL_DIR" = /etc/shorewall ]; then
-	    startup_error "Ordinary users may not compile the /etc/shorewall configuration"
+	if [ -z "$SHOREWALL_DIR" -o "$SHOREWALL_DIR" = /etc/$g_program ]; then
+	    startup_error "Ordinary users may not compile the /etc/$g_program configuration"
 	fi
     fi
     #
@@ -369,7 +388,7 @@ compiler() {
     #
     # Get the config from $SHOREWALL_DIR
     #
-    [ -n "$SHOREWALL_DIR" -a "$SHOREWALL_DIR" != /etc/shorewall ] && get_config
+    [ -n "$SHOREWALL_DIR" -a "$SHOREWALL_DIR" != /etc/$g_program ] && get_config
 
     case $COMMAND in
 	*start|try|refresh)
@@ -390,7 +409,7 @@ compiler() {
     [ "$1" = nolock ] && shift;
     shift
 
-    options="--verbose=$VERBOSITY --config_path=$CONFIG_PATH"
+    options="--verbose=$VERBOSITY --family=$g_family --config_path=$CONFIG_PATH"
     [ -n "$STARTUP_LOG" ] && options="$options --log=$STARTUP_LOG"
     [ -n "$LOG_VERBOSITY" ] && options="$options --log_verbosity=$LOG_VERBOSITY";
     [ -n "$g_export" ] && options="$options --export"
@@ -423,6 +442,17 @@ compiler() {
     fi
 }
 
+#
+# Determine if the current product is in the started state
+#
+product_is_started() {
+    if [ $g_family -eq 4 ]; then
+	shorewall_is_started
+    else
+	shorewall6_is_started
+    fi
+}
+
 #
 # Start Command Executor
 #
@@ -449,14 +479,14 @@ start_command() {
 		[ -n "$nolock" ] || mutex_off
 	    else
 		rc=$?
-		logger -p kern.err "ERROR:Shorewall start failed"
+		logger -p kern.err "ERROR:$g_product start failed"
 	    fi
 	fi
 
 	exit $rc
     }
 
-    if shorewall_is_started; then
+    if product_is_started; then
 	error_message "Shorewall is already running"
 	exit 0
     fi
@@ -552,7 +582,7 @@ start_command() {
 	    run_it $g_restorepath restore
 	    rc=$?
 	    [ -n "$nolock" ] || mutex_off
-	    [ $rc -eq 0 ] && progress_message3 "Shorewall restored from $g_restorepath"
+	    [ $rc -eq 0 ] && progress_message3 "$g_product restored from $g_restorepath"
 	    exit $rc
 	else
 	    do_it
@@ -916,7 +946,7 @@ restart_command() {
 	    [ -n "$nolock" ] || mutex_off
 	else
 	    rc=$?
-	    logger -p kern.err "ERROR:Shorewall restart failed"
+	    logger -p kern.err "ERROR:$g_product restart failed"
 	fi
     else
 	[ -x ${VARDIR}/firewall ] || fatal_error "No ${VARDIR}/firewall file found"
@@ -973,7 +1003,7 @@ refresh_command() {
 	g_refreshchains=:refresh:
     fi
 
-    shorewall_is_started || fatal_error "Shorewall is not running"
+    product_is_started || fatal_error "$g_product is not running"
 
     [ -n "$STARTUP_ENABLED" ] || fatal_error "Startup is disabled"
 
@@ -1058,7 +1088,7 @@ safe_commands() {
 
     [ -n "$STARTUP_ENABLED" ] || fatal_error "Startup is disabled"
 
-    if shorewall_is_started; then
+    if product_is_started; then
 	running=Yes
     else
 	running=
@@ -1071,7 +1101,7 @@ safe_commands() {
     fi
 
     if [ "$COMMAND" = "safe-start" -o -z "$running" ]; then
-	# the command is safe-start or shorewall is not started yet
+	# the command is safe-start or shorewall[6] is not started yet
 	command="start"
     else
 	# the command is safe-restart and the firewall is already running
@@ -1200,14 +1230,14 @@ try_command() {
 
     [ -n "$STARTUP_ENABLED" ] || fatal_error "Startup is disabled"
 
-    if shorewall_is_started; then
+    if product_is_started; then
 	running=Yes
     else
 	running=
     fi
 
     if [ -z "$running" ]; then
-	# shorewall is not started yet
+	# shorewall[6] is not started yet
 	command="start"
     else
 	# the firewall is already running
@@ -1289,7 +1319,7 @@ reload_command() # $* = original arguments less the command.
     local libexec
     libexec=/usr/share
 
-    litedir=/var/lib/shorewall-lite
+    litedir=/var/lib/${g_program}-lite
 
     while [ $finished -eq 0 -a $# -gt 0 ]; do
 	option=$1
@@ -1344,11 +1374,11 @@ reload_command() # $* = original arguments less the command.
 	    ;;
     esac
 
-    temp=$(rsh_command /sbin/shorewall-lite show config 2> /dev/null | grep ^LITEDIR | sed 's/LITEDIR is //')
+    temp=$(rsh_command /sbin/${g_program}-lite show config 2> /dev/null | grep ^LITEDIR | sed 's/LITEDIR is //')
 
     [ -n "$temp" ] && litedir="$temp"
 
-    temp=$(rsh_command /sbin/shorewall-lite show config 2> /dev/null | grep ^LIBEXEC | sed 's/LIBEXEC is //')
+    temp=$(rsh_command /sbin/${g_program}-lite show config 2> /dev/null | grep ^LIBEXEC | sed 's/LIBEXEC is //')
 
     if [ -n "$temp" ]; then
 	case $temp in
@@ -1368,12 +1398,12 @@ reload_command() # $* = original arguments less the command.
 	[ -f $capabilities ] || getcaps=Yes
     fi
 
-    if [ -f $directory/shorewall.conf ]; then
+    if [ -f $directory/${g_program}.conf ]; then
 	if [ -f $directory/params ]; then
 	    . $directory/params
 	fi
 
-	. $directory/shorewall.conf
+	. $directory/$g_program.conf
 	
 	ensure_config_path
     fi
@@ -1382,7 +1412,11 @@ reload_command() # $* = original arguments less the command.
 	[ -n "$DONT_LOAD" ] && DONT_LOAD="$(echo $DONT_LOAD | tr ',' ' ')"
 
 	progress_message "Getting Capabilities on system $system..."
-	if ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IPTABLES=$IPTABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall-lite/shorecap" > $directory/capabilities; then
+	if [ $g_family -eq 4 ]; then
+	    if ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IPTABLES=$IPTABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall-lite/shorecap" > $directory/capabilities; then
+	        fatal_error "Capturing capabilities on system $system failed"
+	    fi
+	elif ! rsh_command "MODULESDIR=$MODULESDIR MODULE_SUFFIX=\"$MODULE_SUFFIX\" IP6TABLES=$IP6TABLES DONT_LOAD=\"$DONT_LOAD\" $libexec/shorewall6-lite/shorecap" > $directory/capabilities; then
 	    fatal_error "Capturing capabilities on system $system failed"
 	fi
     fi
@@ -1391,25 +1425,25 @@ reload_command() # $* = original arguments less the command.
 
     [ -n "$g_timestamp" ] && timestamp='-t' || timestamp=
 
-    if shorewall $g_debugging $verbose $timestamp compile -e $directory $directory/firewall && \
+    if $g_program $g_debugging $verbose $timestamp compile -e $directory $directory/firewall && \
 	progress_message3 "Copying $file and ${file}.conf to ${system}:${litedir}..." && \
 	rcp_command "$directory/firewall $directory/firewall.conf" ${litedir}
     then
 	save=$(find_file save);
 
-	[ -f $save ] && progress_message3 "Copying $save to ${system}:/etc/shorewall-lite/" && rcp_command $save /etc/shorewall-lite/
+	[ -f $save ] && progress_message3 "Copying $save to ${system}:/etc/${g_program}-lite/" && rcp_command $save /etc/shorewall-lite/
 
 	progress_message3 "Copy complete"
 	if [ $COMMAND = reload ]; then
-	    rsh_command "/sbin/shorewall-lite $g_debugging $verbose $timestamp restart" && \
+	    rsh_command "/sbin/${g_program}-lite $g_debugging $verbose $timestamp restart" && \
 	    progress_message3 "System $system reloaded" || saveit=
 	else
-	    rsh_command "/sbin/shorewall-lite $g_debugging $verbose $timestamp start" && \
+	    rsh_command "/sbin/${g_program}-lite $g_debugging $verbose $timestamp start" && \
 	    progress_message3 "System $system loaded" || saveit=
 	fi
 
 	if [ -n "$saveit" ]; then
-	    rsh_command "/sbin/shorewall-lite $g_debugging $verbose $timestamp save" && \
+	    rsh_command "/sbin/${g_program}-lite $g_debugging $verbose $timestamp save" && \
 	    progress_message3 "Configuration on system $system saved"
 	fi
     fi
@@ -1464,7 +1498,7 @@ export_command() # $* = original arguments less the command.
 	    target=$2
 	    ;;
 	*)
-	    fatal_error "Invalid command syntax (\"man shorewall\" for help)"
+	    fatal_error "Invalid command syntax (\"man $g_program\" for help)"
 	    ;;
     esac
 
@@ -1478,7 +1512,7 @@ export_command() # $* = original arguments less the command.
 
     file=$(resolve_file $directory/firewall)
 
-    if shorewall $g_debugging $verbose compile -e $directory $directory/firewall && \
+    if $g_program $g_debugging $verbose compile -e $directory $directory/firewall && \
 	echo "Copying $file and ${file}.conf to ${target#*@}..." && \
 	scp $directory/firewall $directory/firewall.conf $target
     then
@@ -1510,16 +1544,26 @@ usage() # $1 = exit status
     echo "   export [ <directory1> ] [<user>@]<system>[:<directory2>]"
     echo "   forget [ <file name> ]"
     echo "   help"
-    echo "   hits [ -t ]"
-    echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
-    echo "   ipdecimal { <address> | <integer> }"
-    echo "   iprange <address>-<address>"
+
+    if [ $g_family -eq 4 ]; then
+	echo "   hits [ -t ]"
+	echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
+	echo "   ipdecimal { <address> | <integer> }"
+	echo "   iprange <address>-<address>"
+    fi
+
     echo "   iptrace <iptables match expression>"
     echo "   load [ -s ] [ -c ] [ -r <root user> ] [ <directory> ] <system>"
     echo "   logdrop <address> ..."
     echo "   logreject <address> ..."
     echo "   logwatch [<refresh interval>]"
-    echo "   noiptrace <iptables match expression>"
+
+    if [ $g_family -eq 4 ]; then
+	echo "   noiptrace <iptables match expression>"
+    else
+	echo "   noiptrace <ip6tables match expression>"
+    fi
+
     echo "   refresh [ <chain>... ]"
     echo "   reject <address> ..."
     echo "   reload [ -s ] [ -c ] [ -r <root user> ] [ <directory> ] <system>"
@@ -1538,7 +1582,7 @@ usage() # $1 = exit status
     echo "   show dynamic <zone>"
     echo "   show filters"
     echo "   show ip"
-    echo "   show ipa"
+    [ $g_family -eq 4 ] && echo "   show ipa"
     echo "   show [ -m ] log [<regex>]"
     echo "   show macro <macro>"
     echo "   show macros"
@@ -1599,8 +1643,8 @@ version_command() {
     echo $SHOREWALL_VERSION
 
     if [ -n "$all" ]; then
-	for product in shorewall6 shorewall-lite shorewall6-lite shorewall-init; do
-	    if [ -f /usr/share/$product/version ]; then
+	for product in shorewall shorewall6 shorewall-lite shorewall6-lite shorewall-init; do
+	    if [ $product != $g_program -a -f /usr/share/$product/version ]; then
 		echo "$product: $(cat /usr/share/$product/version)"
 	    fi
 	done
@@ -1748,9 +1792,22 @@ fi
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 MUTEX_TIMEOUT=
 
-SHAREDIR=/usr/share/shorewall
-CONFDIR=/etc/shorewall
-g_product="Shorewall"
+g_program=$(basename $0)
+
+if [ $g_program = shorewall6 ]; then
+    SHAREDIR=/usr/share/shorewall6
+    CONFDIR=/etc/shorewall6
+    g_product="Shorewall6"
+    g_family=6
+    g_tool=
+else
+    g_program=shorewall
+    SHAREDIR=/usr/share/shorewall
+    CONFDIR=/etc/shorewall
+    g_product="Shorewall"
+    g_family=4
+fi
+
 g_recovering=
 g_timestamp=
 g_libexec=/usr/share
@@ -1758,7 +1815,7 @@ g_perllib=/usr/share/shorewall
 
 [ -f ${CONFDIR}/vardir ] && . ${CONFDIR}/vardir
 
-[ -n "${VARDIR:=/var/lib/shorewall}" ]
+[ -n "${VARDIR:=/var/lib/$g_program}" ]
 
 if [ ! -f ${VARDIR}/firewall ]; then
     [ -f ${VARDIR}/.restore ] && cp -f ${VARDIR}/.restore ${VARDIR}/firewall
@@ -1774,12 +1831,12 @@ version_file=$SHAREDIR/version
 if [ -f $version_file ]; then
     SHOREWALL_VERSION=$(cat $version_file)
 else
-    echo "   ERROR: Shorewall is not properly installed" >&2
+    echo "   ERROR: $g_product is not properly installed" >&2
     echo "	 The file $version_file does not exist"  >&2
     exit 1
 fi
 
-banner="Shorewall-$SHOREWALL_VERSION Status at $g_hostname -"
+banner="${g_product}-${SHOREWALL_VERSION} Status at $g_hostname -"
 
 case $(echo -e) in
     -e*)
@@ -1812,7 +1869,7 @@ case "$COMMAND" in
     stop|clear)
 	[ $# -ne 1 ] && usage 1
 	get_config
-	[ -x $g_firewall ] || fatal_error "Shorewall has never been started"
+	[ -x $g_firewall ] || fatal_error "$g_product has never been started"
 	[ -n "$nolock" ] || mutex_on
 	run_it $g_firewall $g_debugging $COMMAND
 	[ -n "$nolock" ] || mutex_off
@@ -1821,7 +1878,7 @@ case "$COMMAND" in
 	get_config
 	shift
 	[ -n "$nolock" ] || mutex_on
-	[ -x $g_firewall ] || fatal_error "Shorewall has never been started"
+	[ -x $g_firewall ] || fatal_error "$g_product has never been started"
 	run_it $g_firewall $g_debugging reset $@
 	[ -n "$nolock" ] || mutex_off
 	;;
@@ -1852,7 +1909,7 @@ case "$COMMAND" in
 	;;
     disable|enable)
 	get_config Yes
-	if shorewall_is_started; then
+	if product_is_started; then
 	    run_it ${VARDIR}/firewall $g_debugging $@
 	else
 	    fatal_error "Shorewall is not running"
@@ -1877,13 +1934,13 @@ case "$COMMAND" in
 	[ $# -eq 1 ] || usage 1
 	[ "$(id -u)" != 0 ] && fatal_error "The status command may only be run by root"
 	get_config
-	echo "Shorewall-$SHOREWALL_VERSION Status at $g_hostname - $(date)"
+	echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)"
 	echo
-	if shorewall_is_started ; then
-	    echo "Shorewall is running"
+	if product_is_started ; then
+	    echo "$g_product is running"
 	    status=0
 	else
-	    echo "Shorewall is stopped"
+	    echo "$g_product is stopped"
 	    status=4
 	fi
 
@@ -1907,6 +1964,7 @@ case "$COMMAND" in
     	dump_command $@
 	;;
     hits)
+	[ $g_family -eq 6 ] && usage 1
 	get_config Yes No Yes
 	[ -n "$g_debugging" ] && set -x
 	shift
@@ -1923,14 +1981,14 @@ case "$COMMAND" in
 	;;
     logwatch)
 	get_config Yes Yes Yes
-	banner="Shorewall-$SHOREWALL_VERSION Logwatch at $g_hostname -"
+	banner="${g_product}-$SHOREWALL_VERSION Logwatch at $g_hostname -"
 	logwatch_command $@
 	;;
     drop)
 	get_config
 	[ -n "$g_debugging" ] && set -x
 	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
+	if product_is_started ; then
 	    if ! chain_exists dynamic; then
 		echo "Dynamic blacklisting is not supported in the current $g_product configuration"
 		exit 2
@@ -1940,14 +1998,14 @@ case "$COMMAND" in
 	    block DROP Dropped $*
 	    [ -n "$nolock" ] || mutex_off
 	else
-	    fatal_error "Shorewall is not started"
+	    fatal_error "$g_product is not started"
 	fi
 	;;
     logdrop)
 	get_config
 	[ -n "$g_debugging" ] && set -x
 	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
+	if product_is_started ; then
 	    if ! chain_exists dynamic; then
 		echo "Dynamic blacklisting is not supported in the current $g_product configuration"
 		exit 2
@@ -1957,19 +2015,19 @@ case "$COMMAND" in
 	    block logdrop Dropped $*
 	    [ -n "$nolock" ] || mutex_off
 	else
-	    fatal_error "Shorewall is not started"
+	    fatal_error "$g_product is not started"
 	fi
 	;;
     reject|logreject)
 	get_config
 	[ -n "$g_debugging" ] && set -x
 	[ $# -eq 1 ] && usage 1
-	if shorewall_is_started ; then
+	if product_is_started ; then
 	    [ -n "$nolock" ] || mutex_on
 	    block $COMMAND Rejected $*
 	    [ -n "$nolock" ] || mutex_off
 	else
-	    fatal_error "Shorewall is not started"
+	    fatal_error "$g_product is not started"
 	fi
 	;;
     allow)
@@ -2036,11 +2094,12 @@ case "$COMMAND" in
 	    rm -f ${g_restorepath}-ipsets
 	    echo "    $g_restorepath removed"
 	elif [ -f $g_restorepath ]; then
-	    echo "   $g_restorepath exists and is not a saved Shorewall configuration"
+	    echo "   $g_restorepath exists and is not a saved $g_product configuration"
 	fi
 	rm -f ${VARDIR}/save
 	;;
     ipcalc)
+	[ $g_family -eq 6 ] && usage 1
     	[ -n "$g_debugging" ] && set -x
 	if [ $# -eq 2 ]; then
 	    address=${2%/*}
@@ -2120,20 +2179,20 @@ case "$COMMAND" in
 	get_config
 	shift
 	if shorewall_is_started ; then
-	    $IPTABLES -t raw -A PREROUTING $@ -j TRACE
-	    $IPTABLES -t raw -A OUTPUT $@ -j TRACE
+	    $g_tool -t raw -A PREROUTING $@ -j TRACE
+	    $g_tool -t raw -A OUTPUT $@ -j TRACE
 	else
-	    fatal_error "Shorewall is not started"
+	    fatal_error "$g_product is not started"
 	fi
 	;;
      noiptrace)
 	get_config
 	shift
 	if shorewall_is_started ; then
-	    $IPTABLES -t raw -D PREROUTING $@ -j TRACE
-	    $IPTABLES -t raw -D OUTPUT $@ -j TRACE
+	    $g_tool -t raw -D PREROUTING $@ -j TRACE
+	    $g_tool -t raw -D OUTPUT $@ -j TRACE
 	else
-	    fatal_error "Shorewall is not started"
+	    fatal_error "$g_product is not started"
 	fi
 	;;
     *)