Shorewall
+awards Shorewall
1.4.7c released.Tom Eastep
-
Permission is granted to copy, distribute and/or modify this
-document under the terms of the GNU Free Documentation License, Version
-1.2 or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no Front-Cover, and with no Back-Cover
-Texts. A copy of the license is included in the section entitled “GNU Free
-Documentation License”.
-
2005-05-09
-
05/09/2005 I will not be reading -list posts for a while
-I occasionally need a break from answering the same silly questions
-over and over and over and ...
-
It is truly upbelivable that people can find the address of the
-mailing list on the Shorewall web sites yet they cannot find anything
-else including:
-
05/02/2005 Shorewall 2.2.4
-
Problems Corrected:
-
2005-05-15
+05/02/2005 Shorewall 2.2.4
+Problems Corrected:
The error message:
Error: No appropriate chain for
zone <z1> to zone <z2>
@@ -53,92 +34,101 @@ zone <z1> to zone <z2>
has been changed to one that is more self-explanatory:
Error: No policy defined for zone
-<z1> to zone <z2>
When only an interface name appeared in the HOST(S) column of an
/etc/shorewall/hosts file entry, a misleading iptables error message
resulted. Now the following message is generated:
Error: Invalid HOST(S) column
-contents: <column contents>
New Features:
Support has been added for UPnP using linux-igd (http://linux-idg.sourceforge.net). -UPnP is required by a number of popular applications including MSN IM.
WARNING:
+From a security architecture +viewpoint, UPnP is a disaster. It assumes that:
+All local systems and their users +are completely trustworthy.
+No local system is infected with any worm or trojan.
+If either of these
+assumptions are not true then UPnP can be used to totally defeat your
+firewall and to allow incoming connections to arbitrary local systems
+on any port whatsoever.
+In short: USE UPnP AT YOUR OWN RISK.
+
WARNING:
+The linux-igd project appears to be
+inactive and the web site does not display correctly on any open
+source browser that I've tried.
-Building and installing linux-igd is not for the faint of heart. You
-must download the source from CVS and be prepared to do quite a bit of
-fiddling with the include files from libupnp (which is required to
-build and/or run linux-igd).
-
-
Configuring +linux-igd:
+In /etc/upnpd.conf, you will
+want:
insert_forward_rules = yes
prerouting_chain_name = UPnP
-forward_chain_name = forwardUPnP
-
-
Shorewall +Configuration:
+In /etc/shorewall/interfaces, you need
the 'upnp' option on your external interface.
-If your fw->loc policy is not ACCEPT then you need this rule:
+If your fw->loc
+policy is not ACCEPT then you need this rule:
allowoutUPnP
-fw loc
+fw
+loc
-Note: To use 'allowoutUPnP', your iptables and kernel must support the
-'owner match' feature (see the output of "shorewall check").
+Note: To use 'allowoutUPnP', your iptables and kernel must
+support the 'owner match' feature (see the output of "shorewall
+check").
-If your loc->fw policy is not ACCEPT then you need this rule:
+If your loc->fw policy is not ACCEPT then you
+need this rule:
allowinUPnP
-loc fw
+loc
+fw
You MUST have this rule:
forwardUPnP
-net loc
-
-
You must also ensure that +you have a route to 224.0.0.0/4 on you internal (local) interface.
+A new 'started' extension script has been added. The
difference between this extension script and /etc/shorewall/start is
that this one is invoked after delayed loading of the blacklist
(DELAYBLACKLISTLOAD=Yes) and after the 'shorewall' chain has been
@@ -146,22 +136,22 @@ created (thus signaling that the firewall is completely up.
/etc/shorewall/started should not change the firewall configuration
directly but may do so indirectly by running /sbin/shorewall with the
-'nolock' option.
-
+'nolock' option.
By default, shorewall is started with the "-f" (fast) option
+when your system boots. You can override that setting by setting the
+OPTIONS variable in /etc/sysconfig/shorewall (SuSE/Redhat) or
/etc/default/shorewall (Debian/Bering). If neither file exists, feel
free to create one or the other.
Example: If you want Shorewall to always use the config files even if
there is a saved configuration, then specify:
- OPTIONS=""
-
+ OPTIONS=""
Shorewall now has support for the SAME target. This change
affects the /etc/shorewall/masq and /etc/shorewall/rules file.
SAME is useful when you specify multiple target IP addresses (in the
@@ -190,10 +180,10 @@ In the rules file, when multiple connections from an internet host
match a SAME rule then all of the connections will be sent to the same
internal server. SAME rules are very similar to DNAT rules with the
keyword SAME replacing DNAT. As in the masq file, changing the port
-number is not supported.
-
+number is not supported.
A "shorewall show capabilities" command has been added to report
the capabilities of your kernel and iptables.
Example:
@@ -228,17 +218,17 @@ IP range Match: Available
Recent Match: Available
Owner Match: Available
- gateway:~#
-
+ gateway:~#
A "-v" option has been added to /sbin/shorewall. Currently, this
option only affects the "show log" command (e.g., "shorewall -v show
log") and the "monitor" command. In these commands, it causes the MAC
address in the log message (if any) to be displayed. As previously,
-when "-v" is omitted, the MAC address is suppressed.
-
+when "-v" is omitted, the MAC address is suppressed.
In /etc/shorewall/rules, a value of 'none' in either the SOURCE
or DEST columns now causes the rule to be ignored. This is most useful
when used with shell variables:
@@ -252,49 +242,55 @@ $FTP_CLIENTS fw
When FTP_CLIENTS is set to
'none', the above rule is ignored. Otherwise, the rule is
-evaluated and generates Netfilter rules.
-
+evaluated and generates Netfilter rules.
The installer now detects that it is running on a Slackware +system and adjusts the DEST and INIT variables accordingly.
05/01/2005 Tom
-spoke at LinuxFest NW 2005 -- Bellingham Technical College,
-Bellingham Washington
-
-Tom's presentation was entitled "Shorewall and Native IPSEC" and is
-available for download here
-(PDF Format).
+
05/01/2005 Tom spoke at LinuxFest NW 2005 -- Bellingham
+Technical College, Bellingham Washington
+
+Tom's
+presentation was entitled "Shorewall and Native IPSEC" and
+is available for download here
+(PDF Format).
-
-04/07/2005
-Shorewall 2.2.3
-
-Problems Corrected:
-
If a zone is defined in +/etc/shorewall/hosts using <interface>:!<network> in the +HOSTS column then startup errors occur on "shorewall [re]start".
+Previously, if "shorewall status" was run on a system whose kernel lacked advanced routing support (CONFIG_IP_ADVANCED_ROUTER), then no routing information was -displayed.
New Features:
A new extension script "continue" +has been added. This script is invoked after Shorewall has set the +built-in filter chains policy to DROP, deleted any existing Netfilter +rules and user chains and has enabled existing connections. It is +useful for enabling certain communication while Shorewall is being +[re]started. Be sure to delete any rules that you add here in your +/etc/shorewall/start file.
+There has been ongoing confusion
+about how the /etc/shorewall/routestopped file works. People understand
+how it works with the 'shorewall stop' command but when they read that
+'shorewall restart' is logically equivalent to 'shorewall stop'
+followed by 'shorewall start' then they erroneously conclude that
/etc/shorewall/routestopped can be used to enable new connections
during 'shorewall restart'. Up to now, it cannot -- that file is not
processed during either 'shorewall start' or 'shorewall restart'.
@@ -308,10 +304,13 @@ added earlier.
The result of this change will be that during most of [re]start, new
connections will be allowed in accordance with the contents of
-/etc/shorewall/routestopped.
The performance of configurations
+with a large numbers of entries in /etc/shorewall/maclist can be
+improved by setting the new MACLIST_TTL variable in
+/etc/shorewall/shorewall.conf.
If your iptables and kernel support the "Recent Match" (see the output
of "shorewall check" near the top), you can cache the results of a
@@ -330,89 +329,110 @@ checked against the entire list.
If MACLIST_TTL is not specified or is specified as empty (e.g,
MACLIST_TTL="" or is specified as zero then 'maclist' lookups will not
-be cached.
You can now specify QUEUE as a policy and you can designate a
common action for QUEUE policies in /etc/shorewall/actions. This is
-useful for sending packets to something like Snort Inline.
+useful for sending packets to something like Snort Inline.
03/31/2005 Shorewall 2.0.17
-
Invoking the 'rejNotSyn' action +results in an error at startup.
+The UDP and TCP port numbers in +/usr/share/shorewall/action.AllowPCA were reversed.
+If a zone is defined in /etc/shorewall/hosts using <interface>:!<network> +in the HOSTS column then startup errors occur on "shorewall [re]start".
03/12/2005 Shorewall 2.2.2
+
+Problems Corrected:
The SOURCE column in the +/etc/shorewall/tcrules file now correctly allows IP ranges (assuming +that your iptables and kernel support ranges).
If A is a user-defined action and +you have file /etc/shorewall/A then when that file is invoked by +Shorewall during [re]start, the $TAG value may be incorrect.
+Previously, if an iptables command +generating a logging rule failed, the Shorewall [re]start was still +successful. This error is now considered fatal and Shorewall will be +either restored from the last save (if any) or it will be stopped.
+The port numbers for UDP and TCP +were previously reversed in the /usr/share/shorewall/action.AllowPCA +file.
+Previously, the 'install.sh' script +did not update the /usr/share/shorewall/action.* files.
+Previously, when an interface name appeared in the DEST column +of /etc/shorewall/tcrules, the name was not validated against the set +of defined interfaces and bridge ports.
New Features:
The SOURCE column in the +/etc/shorewall/tcrules file now allows $FW to be optionally followed by +":" and a host/network address or address range.
+Shorewall now clears the output +device only if it is a terminal. This avoids ugly control sequences +being placed in files when /sbin/shorewall output is redirected.
+The output from 'arp -na' has been +added to the 'shorewall status' display.
+The 2.6.11 Linux kernel and iptables
+1.3.0 now allow port ranges to appear in port lists handled by
+"multiport match". If Shorewall detects this capability, it will use
+"multiport match" for port lists containing port ranges. Be cautioned
+that each port range counts for TWO ports and a port list handled with
+"multiport match" can still specify a maximum of 15 ports.
As always, if a port list in /etc/shorewall/rules is incompatible with
"multiport match", a separate iptables rule will be generated for each
-element in the list.
Traditionally, the RETURN target in the 'rfc1918' file has
+caused 'norfc1918' processing to cease for a packet if the packet's
+source IP address matches the rule. Thus, if you have:
-
-SUBNETS TARGET
-
-192.168.1.0/24 RETURN
+ SUBNETS
+TARGET
+ 192.168.1.0/24 RETURN
then traffic from 192.168.1.4 to 10.0.3.9 will be accepted even though
you also have:
-
-SUBNETS TARGET
-
-10.0.0.0/8 logdrop
+ SUBNETS
+TARGET
+ 10.0.0.0/8
+logdrop
Setting RFC1918_STRICT=Yes in shorewall.conf will cause such traffic to
be logged and dropped since while the packet's source matches the
@@ -422,24 +442,28 @@ If not specified or specified as empty (e.g., RFC1918_STRICT="") then
RFC1918_STRICT=No is assumed.
WARNING: RFC1918_STRICT=Yes requires that your kernel and iptables
-support 'Connection Tracking' match.
+support 'Connection Tracking' match.
02/15/2005
-Shorewall 2.2.1 02/15/2005 Shorewall 2.2.1
+
-
-
The /etc/shorewall/policy file +contained a misleading comment and both that file and the +/etc/shorewall/zones file lacked examples.
+Shorewall previously used root's +default umask which could cause files in /var/lib/shorewall to be +world-readable. Shorewall now uses umask 0177.
+In log messages produced by logging a built-in action, the
+packet disposition was displayed incorrectly.
Example:
@@ -457,29 +481,31 @@ tcp
rather than
Feb
-12 23:57:08 server Shorewall:rejNotSyn:REJECT: ...
-
+12 23:57:08 server Shorewall:rejNotSyn:REJECT: ...
The comments regarding built-in +actions in /usr/share/shorewall/actions.std have been corrected.
+The /etc/shorewall/policy file in the LRP package was missing +the 'all->all' policy.
02/05/2005 End of Support for Shorewall 1.4
-
Recent 2.6 kernels include code that evaluates TCP packets based
on TCP Window analysis. This can cause packets that were previously
classified as NEW or ESTABLISHED to be classified as INVALID.
@@ -498,19 +524,21 @@ DROPINVALID option allows INVALID packets to be passed through the
normal rules chains by setting DROPINVALID=No.
If not specified or if specified as empty (e.g., DROPINVALID="") then
-DROPINVALID=Yes is assumed.
02/01/2005
-Shorewall 2.2.0 02/01/2005 Shorewall 2.2.0
+
-
-
ICMP packets that are in the INVALID +state are now dropped by the Reject and Drop default actions. They do +so using the new 'dropInvalid' builtin action. An 'allowInvalid' +builtin action is also provided which accepts packets in that state.
+The /etc/shorewall/masq file INTERFACE column now allows
additional options.
Normally MASQUERADE/SNAT rules are evaluated after one-to-one NAT rules
@@ -530,299 +558,328 @@ Examples:
eth0:
eth1::192.0.2.32/27
-+eth3:
-
++eth3:
Similar to 2), the +/etc/shorewall/nat file INTERFACE column now allows you to override the +setting of ADD_IP_ALIASES=Yes by following the interface name with ":" +but no digit.
+All configuration files in the +Shorewall distribution with the exception of shorewall.conf are now +empty. In particular, the /etc/shorewall/zones, /etc/shorewall/policy +and /etc/shorewall/tos files now have no active entries. Hopefully this +will stop the questions on the support and development lists regarding +why the default entries are the way they are.
+Previously, including a log level
+(and optionally a log tag) on a rule that specified a user-defined (or
+Shorewall-defined) action would log all traffic passed to the action.
+Beginning with this release, specifying a log level in a rule that
+specifies a user- or Shorewall-defined action will cause each rule in
+the action to be logged with the specified level (and tag).
The extent to which logging of action rules occurs is goverend by the
-following:
When you invoke an action and specify a log level, only
+those rules in the action that have no log level will be changed to log
+at the level specified at the action invocation.
+
Example:
-
+
/etc/shorewall/action.foo:
-
+
ACCEPT - -
tcp 22
bar:info
-
+
/etc/shorewall/rules:
-
+
foo:debug fw net
-
+
Logging in the invoked 'foo' action will be:
-
+
ACCEPT:debug - -
tcp 22
-bar:info
-
-
If you follow the log level with "!" then logging will be at
that level for all rules recursively invoked by the action
-
+
Example: /etc/shorewall/action.foo:
-
- Update: I've been
-informed by Mandrake Development that this problem has been corrected
-in Mandrake 10.0 Final (the problem still exists in the 10.0
-Community release).
+
+ Update: I've been informed by Mandrake Development that
+this problem has been corrected in Mandrake 10.0 Final (the problem
+still exists in the 10.0 Community release).
ACCEPT - -
tcp 22
bar:info
-
+
/etc/shorewall/rules:
-
+
foo:debug! fw net
-
+
Logging in the invoke 'foo' action will be:
-
+
ACCEPT:debug - -
tcp 22
-bar:debug!
-
-
This change has an effect on extension +scripts used with user-defined actions. If you define an action +'acton' and you have an /etc/shorewall/acton script then when that +script is invoked, the following three variables will be set for use +by the script:
+$CHAIN = the name of the chain where
your rules are to be placed. When logging is used on an action
invocation, Shorewall creates a chain with a slightly different name
from the action itself.
-$LEVEL = Log level. If empty, no logging was specified.
-$TAG = Log Tag.
-
-
Example:
/etc/shorewall/rules:
-
+
+
acton:info:test
-Your /etc/shorewall/acton file will be run with:
-
-
$CHAIN="%acton1
$LEVEL="info"
-$TAG="test"
-
+
The /etc/shorewall/startup_disabled +file is no longer created when Shorewall is first installed. Rather, +the variable STARTUP_ENABLED is set to 'No' in +/etc/shorewall/shorewall.conf. In order to get Shorewall to start, that +variable's value must be set to 'Yes'. This change accomplishes two +things:
+It prevents Shorewall from being +started prematurely by the user's initialization scripts.
+It causes /etc/shorewall/shorewall.conf to be modified so +that it won't be replaced by upgrades using RPM.
+Support has been added for the 2.6 +Kernel IPSEC implementation. To use this support, you must have +installed the IPSEC policy match patch and the four IPSEC/Netfilter +patches from Patch-0-Matic-ng. The policy match patch affects both your +kernel and iptables. There are two ways to specify that IPSEC is to be +used when communicating with a set of hosts; both methods involve the +new /etc/shorewall/ipsec file:
+If encrypted communication is used with all hosts in a zone,
then you can designate the zone as an "ipsec" zone by placing 'Yes" in
the IPSEC ONLY column in /etc/shorewall/ipsec:
-
- #ZONE
- IPSEC OPTIONS ...
- #
- ONLY
- vpn
- Yes
-
+
+ #ZONE
+ IPSEC OPTIONS ...
+ #
+ ONLY
+ vpn
+ Yes
+
The hosts in the zone (if any) must be specified in
/etc/shorewall/hosts but you do not need to specify the 'ipsec' option
on the entries in that file (see below). Dynamic zones involving IPSEC
must use that technique.
-
+
Example:Under 2.4 Kernel FreeS/Wan:
-
+
/etc/shorewall/zones:
-
- net
-Net The big bad Internet
- vpn
-VPN Remote Network
-
+
+ net
+Net The big bad Internet
+ vpn
+VPN Remote Network
+
/etc/shorewall/interfaces:
-
- net
-eth0 ...
- vpn
-ipsec0 ...
-
+
+ net
+eth0 ...
+ vpn
+ipsec0 ...
+
Under 2.6 Kernel with this new support:
-
+
/etc/shorewall/zones:
-
- net
-Net The big bad Internet
- vpn
-VPN Remote Network
-
+
+ net
+Net The big bad Internet
+ vpn
+VPN Remote Network
+
/etc/shorewall/interfaces:
-
- net
-eth0 ...
-
+
+ net
+eth0 ...
+
/etc/shorewall/hosts:
-
- vpn
-eth0:0.0.0.0/0
-
+
+ vpn eth0:0.0.0.0/0
+
/etc/shorewall/ipsec
-
- vpn Yes
-
-
If only part of the hosts in a zone require encrypted
communication, you may use of the new 'ipsec' option in
/etc/shorewall/hosts to designate those hosts.
-
+
Example:
-
+
Under 2.4 Kernel FreeS/Wan:
-
-/etc/shorewall/zones:
-
net Net The big bad Internet-/etc/shorewall/interfaces:
loc Local Extended local zone
net Net The big bad Internet+
loc Local Extended local zone
/etc/shorewall/interfaces:
+
+ net
+eth0 ...
+ loc
+eth1 ...
+ loc
+ipsec0 ...
+
Under 2.6 Kernel with this new support:
-
+
/etc/shorewall/zones:
-
- net
- Net The big bad Internet
- vpn
- VPN Remote Network
-
+
+ net
+Net The big bad Internet
+ vpn
+VPN Remote Network
+
/etc/shorewall/interfaces:
-
- net
-eth0 ...
- loc
-eth1 ...
-
+
+ net
+eth0 ...
+ loc
+eth1 ...
+
/etc/shorewall/hosts:
-
- vpn
-eth0:0.0.0.0/0 ipsec,...
Regardless of which technique you
choose, you can specify additional SA options for the zone in the
/etc/shorewall/ipsec entry.
-The OPTIONS, IN OPTIONS and OUT OPTIONS columns specify the
-input-output, input and output characteristics of the security
-associations to be used to decrypt (input) or encrypt (output) traffic
-to/from the zone.
+The OPTIONS, IN OPTIONS and OUT
+OPTIONS columns specify the input-output, input and output
+characteristics of the security associations to be used to decrypt
+(input) or encrypt (output) traffic to/from the zone.
-The available options are:
-
reqid[!]=<number> where +<number> is specified using setkey(8) using the +'unique:<number>' option for the SPD level.
+spi[!]=<number> where +<number> is the SPI of the SA. Since different SAs are used to +encrypt and decrypt traffic, this option should only be listed in the +IN OPTIONS and OUT OPTIONS columns.
+proto[!]=ah|esp|ipcomp
+mss=<number> (sets the MSS +value in TCP SYN packets and is not related to policy matching)
+mode[!]=transport|tunnel
+tunnel-src[!]=<address>[/<mask>] +(only available with mode=tunnel)
+tunnel-dst[!]=<address>[/<mask>] +(only available with mode=tunnel). Because tunnel source and +destination are dependent on the direction of the traffic, these +options should only appear in the IN OPTIONS and OUT OPTIONS columns.
+strict (if specified, +packets must match all policies; policies are delimited by 'next').
+next (only available with strict)
+Examples:
-#ZONE
+#ZONE
IPSEC OPTIONS
-IN
- OUT
-#
+IN OUT
+#
ONLY
-
-OPTIONS OPTIONS
-vpn
+
+
+OPTIONS
+OPTIONS
+vpn
Yes mode=tunnel,proto=esp
-spi=1000 spi=1001
-loc
-No reqid=44,mode=transport
+spi=1000 spi=1001
+loc
+No reqid=44,mode=transport
-The /etc/shorewall/masq file has a new IPSEC column added. If you
-specify Yes or yes in that column then the unencrypted packets will
-have their source address changed. Otherwise, the unencrypted packets
-will not have their source addresses changed. This column may also
-contain a comma-separated list of the options specified above in which
-case only those packets that will be encrypted by an SA matching the
-given options will have their source address changed.
-
To improve interoperability, tunnels +of type 'ipsec' no longer enforce the use of source port 500 for ISAKMP +and OpenVPN tunnels no longer enforce use of the specified port as both +the source and destination ports.
+A new 'allowBcast' builtin action +has been added -- it silently allows broadcasts and multicasts.
+The -c option in /sbin/shorewall commands is now deprecated. The
commands where -c was previously allowed now permit you to specify a
configuration directory after the command:
@@ -831,10 +888,10 @@ configuration directory after the command:
shorewall restart [
<configuration-directory> ]
shorewall start [
-<configuration-directory> ]
-
+<configuration-directory> ]
Normally, when SNAT or MASQUERADE is applied to a tcp or udp
connection, Netfilter attempts to retain the source port number. If it
has to change to port number to avoid <source
address>,<source port> conflicts, it tries to do so within
@@ -846,83 +903,91 @@ specify either "tcp" or "udp" in the PROTO column.
Examples 1 -- MASQUERADE with tcp source ports 4000-5000:
- #INTERFACE
+ #INTERFACE
SUBNET
-ADDRESS PROTO
-
-eth0 192.168.1.0/24
-:4000-5000 tcp
+ADDRESS PROTO
+ eth0
+192.168.1.0/24 :4000-5000 tcp
Example 2 -- SNAT with udp source ports 7000-8000:
- #INTERFACE
+ #INTERFACE
SUBNET
ADDRESS
-PROTO
-
-eth0
+PROTO
+ eth0
10.0.0.0/8
-192.0.2.44:7000-8000 udp
-
-
You may now account by user/group ID +for outbound traffic from the firewall itself with entries in +/etc/shorewall/accounting. Such accounting rules must be placed in the +OUTPUT chain. See the comments at the top of /etc/shorewall/accounting +for details.
+Shorewall now verifies that your +kernel and iptables have physdev match support if BRIDGING=Yes in +shorewall.conf.
+Beginning with this release, if your +kernel and iptables have iprange match support (see the output from +"shorewall check"), then with the exception of the +/etc/shorewall/netmap file, anywhere that a network address may appear +an IP address range of the form <low address>-<high +address> may also appear.
+Support has been added for the
+iptables CLASSIFY target. That target allows you to classify packets
+for traffic shaping directly rather than indirectly through fwmark.
+Simply enter the <major>:<minor> classification in the
+first column of /etc/shorewall/tcrules:
Example:
- #MARK/
+ #MARK/
SOURCE
-DEST PROTO PORT(S)
- #CLASSIFY
- 1:30
- -
- eth0 tcp
- 25
+DEST PROTO PORT(S)
+ #CLASSIFY
+ 1:30
+-
+eth0 tcp 25
Note that when using this form of rule, it is acceptable to include the
name of an interface in the DEST column.
Marking using the CLASSIFY target always occurs in the POSTROUTING
chain of the mangle table and is not affected by the setting of
-MARK_IN_FORWARD_CHAIN in shorewall.conf.
During "shorewall start", IP +addresses to be added as a consequence of ADD_IP_ALIASES=Yes and +ADD_SNAT_ALIASES=Yes are quietly deleted when /etc/shorewall/nat and +/etc/shorewall/masq are processed then they are re-added later. This is +done to help ensure that the addresses can be added with the specified +labels but can have the undesirable side effect of causing routes to be +quietly deleted. A new RETAIN_ALIASES option has been added to +shorewall.conf; when this option is set to Yes, existing addresses will +not be deleted. Regardless of the setting of RETAIN_ALIASES, addresses +added during "shorewall start" are still deleted at a subsequent +"shorewall stop" or "shorewall restart".
+Users with a large black list (from +/etc/shorewall/blacklist) may want to set the new DELAYBLACKLISTLOAD +option in shorewall.conf. When DELAYBLACKLISTLOAD=Yes, Shorewall will +enable new connections before loading the blacklist rules. While this +may allow connections from blacklisted hosts to slip by during +construction of the blacklist, it can substantially reduce the time +that all new connections are disabled during "shorewall [re]start".
+Using the default LOGFORMAT, chain names longer than 11
characters (such as in user-defined actions) may result in log prefix
truncation. A new shorewall.conf action LOGTAGONLY has been added
to deal with this problem. When LOGTAGONLY=Yes, logging rules that
@@ -933,40 +998,42 @@ Example -- file /etc/shorewall/action.thisisaverylogactionname:
Rule:
- DROP:info:ftp
+ DROP:info:ftp
0.0.0.0/0 0.0.0.0/0
-tcp 21
+tcp 21
Log prefix with LOGTAGONLY=No:
- Shorewall:thisisaverylongacti
+ Shorewall:thisisaverylongacti
Log prefix with LOGTAGONLY=Yes:
- Shorewall:ftp:DROP
-
+ Shorewall:ftp:DROP
Shorewall now resets the +'accept_source_route' flag for all interfaces. If you wish to accept +source routing on an interface, you must specify the new 'sourceroute' +interface option in /etc/shorewall/interfaces.
+The default Drop and Reject actions now invoke the new standard
action 'AllowICMPs'. This new action accepts critical ICMP types:
Type 3 code 4 (fragmentation needed)
Type 11 (TTL
-exceeded)
-
+exceeded)
Explicit control over the kernel's +Martian logging is now provided using the new 'logmartians' interface +option. If you include 'logmartians' in the interface option list then +logging of Martian packets on will be enabled on the specified +interface. If you wish to globally enable martian logging, you can set +LOG_MARTIANS=Yes in shorewall.conf.
+You may now cause Shorewall to use the '--set-mss' option of the
TCPMSS target. In other words, you can cause Shorewall to set the MSS
field of SYN packets passing through the firewall to the value you
specify. This feature extends the existing CLAMPMSS option in
@@ -975,15 +1042,15 @@ value as well as the values "Yes" and "No".
Example:
- CLAMPMSS=1400
-
+ CLAMPMSS=1400
Shorewall now includes support for
+the ipp2p match facility. This is a departure from my usual policy in
+that the ipp2p match facility is included in Patch-O-Matic-NG and is
+unlikely to ever be included in the kernel.org source tree. Questions
+about how to install the patch or how to build your kernel and/or
+iptables should not be posted on the Shorewall mailing lists.
In the following files, the "PROTO" or "PROTOCOL" column may contain
"ipp2p":
@@ -1000,10 +1067,15 @@ list of the options and their meaning, at a root prompt:
You must not include the leading "--" on the option; Shorewall will
supply those characters for you. If you do not include an option then
-"ipp2p" is assumed (Shorewall will generate "-m ipp2p --ipp2p").
Shorewall now has support for the +CONNMARK target from iptables. See the /etc/shorewall/tcrules file for +details.
+A new debugging option LOGALLNEW has been added to
shorewall.conf. When set to a log level, this option causes Shorewall
to generaate a logging rule as the first rule in each builtin chain.
@@ -1015,7 +1087,7 @@ prefix.
Example: Using the default LOGFORMAT, the log prefix for logging from
the nat table's PREROUTING chain is:
- Shorewall:nat:PREROUTING
+ Shorewall:nat:PREROUTING
IMPORTANT: There is no rate limiting on these logging rules so use
LOGALLNEW at your own risk; it may cause high CPU and disk utilization
@@ -1023,320 +1095,363 @@ and you may not be able to control your firewall after you enable this
option.
DANGER: DO NOT USE THIS OPTION IF THE RESULTING LOG MESSAGES WILL BE
-SENT TO ANOTHER SYSTEM.
-
+SENT TO ANOTHER SYSTEM.
The SUBNET column in +/etc/shorewall/rfc1918 has been renamed SUBNETS and it is now possible +to specify a list of addresses in that column.
+The AllowNNTP action now also allows +NNTP over SSL/TLS (NNTPS).
+For consistency, the CLIENT PORT(S) +column in the tcrules file has been renamed SOURCE PORT(S).
+The contents of +/proc/sys/net/ip4/icmp_echo_ignore_all is now shown in the output of +"shorewall status".
+A new IPTABLES option has been added +to shorewall.conf. IPTABLES can be used to designate the iptables +executable to be used by Shorewall. If not specified, the iptables +executable determined by the PATH setting is used.
+You can now use the "shorewall show zones" command to display
+the current contents of the zones. This is particularly useful if you
+use dynamic zones (DYNAMIC_ZONES=Yes in shorewall.conf).
Example:
- ursa:/etc/shorewall
-# shorewall show zones
-
-Shorewall-2.2.0-Beta7 Zones at ursa - Sat Nov 27 11:18:25 PST 2004
-
- loc
-
- eth0:192.168.1.0/24
-
- eth1:1.2.3.4
-
-net
-
- eth0:0.0.0.0/0
- WiFi
-
- eth1:0.0.0.0/0
- sec
-
- eth1:0.0.0.0/0
-
-
-ursa:/etc/shorewall #
-
+ ursa:/etc/shorewall
+# shorewall show zones
+ Shorewall-2.2.0-Beta7 Zones
+at ursa - Sat Nov 27 11:18:25 PST 2004
+
+ loc
+ eth0:192.168.1.0/24
+ eth1:1.2.3.4
+ net
+
+ eth0:0.0.0.0/0
+ WiFi
+ eth1:0.0.0.0/0
+ sec
+ eth1:0.0.0.0/0
+
+ ursa:/etc/shorewall #
Variable expansion may now be used with the INCLUDE directive.
Example:
/etc/shorewall/params
- FILE=/etc/foo/bar
+ FILE=/etc/foo/bar
Any other config file:
- INCLUDE $FILE
-
+ INCLUDE
+$FILE
The output of "shorewall status" now +includes the results of "ip -stat link ls". This helps diagnose +performance problems caused by link errors.
+Previously, when rate-limiting was +specified in /etc/shorewall/policy (LIMIT:BURST column), any traffic +which exceeded the specified rate was silently dropped. Now, if a log +level is given in the entry (LEVEL column) then drops are logged at +that level at a rate of 5/min with a burst of 5.
+Recent 2.6 kernels include code that evaluates TCP packets based
on TCP Window analysis. This can cause packets that were previously
classified as NEW or ESTABLISHED to be classified as INVALID.
The new kernel code can be disabled by including this command in your
/etc/shorewall/init file:
- echo 1 >
-/proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_be_liberal
+ echo 1 >
+/proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_be_liberal
Additional kernel logging about INVALID TCP packets may be obtained by
adding this command to /etc/shorewall/init:
- echo 1 >
-/proc/sys/net/ipv4/netfilter/ip_conntrack_log_invalid
+ echo 1 >
+/proc/sys/net/ipv4/netfilter/ip_conntrack_log_invalid
Traditionally, Shorewall has dropped INVALID TCP packets early. The new
DROPINVALID option allows INVALID packets to be passed through the
normal rules chains by setting DROPINVALID=No.
If not specified or if specified as empty (e.g., DROPINVALID="") then
-DROPINVALID=Yes is assumed.
-
+DROPINVALID=Yes is assumed.
The "shorewall add" and "shorewall
+delete" commands now accept a list of hosts to add or delete.
Examples:
- shorewall add
-eth1:1.2.3.4 eth1:2.3.4.5 z12
- shorewall delete
-eth1:1.2.3.4 eth1:2.3.4.5 z12
+ shorewall add eth1:1.2.3.4
+eth1:2.3.4.5 z12
+ shorewall delete eth1:1.2.3.4
+eth1:2.3.4.5 z12
The above commands may also be written:
- shorewall add
-eth1:1.2.3.4,2.3.4.5 z12
- shorewall delete
-eth1:1.2.3.4,2.3.4.5 z12
-
+ shorewall add
+eth1:1.2.3.4,2.3.4.5 z12
+ shorewall delete
+eth1:1.2.3.4,2.3.4.5 z12
+
TCP OpenVPN tunnels are now supported using the 'openvpn' tunnel
type. OpenVPN entries in /etc/shorewall/tunnels have this format:
- openvpn[:{tcp|udp}][:<port>]
-<zone> <gateway>
+ openvpn[:{tcp|udp}][:<port>]
+<zone> <gateway>
Examples:
- openvpn:tcp
+ openvpn:tcp
net
-1.2.3.4 # TCP tunnel on port 1194
-
-openvpn:3344 net
-1.2.3.4 # UDP on port 3344
-
-openvpn:tcp:4455 net
-1.2.3.4 # TCP on port 4455
-
+1.2.3.4 # TCP tunnel on port 1194
+ openvpn:3344
+ net 1.2.3.4 #
+UDP on port 3344
+ openvpn:tcp:4455
+net 1.2.3.4 # TCP on port 4455
A new 'ipsecvpn' script is included in the tarball and in the
RPM. The RPM installs the file in the Documentation directory
(/usr/share/doc/packages/shorewall-2.2.0-0RC1).
This script is intended for use on Roadwarrior laptops for establishing
-an IPSEC SA to/from remote networks. The script has some limitations:
Only one instance of the script +may be used at a time.
+Only the first SPD accessed will be instantiated at the remote gateway. So while the script creates SPDs to/from the remote gateway and each network listed in the NETWORKS setting at the front of the -script, only one of these may be used at a time.
01/17/2005 -
-Shorewall 2.2.0 RC5
-
-Problems Corrected:
-
The output of "shorewall status" now +lists the loaded netfilter kernel modules.
+The range of UDP ports opened by the +AllowTrcrt action has been increased to 33434:33524.
+The IANA has recently registered port 1194 for use by OpenVPN. +In previous versions of Shorewall (and OpenVPN), the default port was +5000 but has been changed to 1194 to conform to the new OpenVPN +default.
01/17/2005 - Shorewall 2.2.0 RC5
+
+Problems Corrected:
The AllowTrcrt action has been +changed to allow up to 30 hops (same as default for 'traceroute'). +Previously, the action was documented as allowing 20 hops but actually +only allowed for 6 hops.
+Using some lightweight shells, valid entries in +/etc/shorewall/ecn produce startup errors.
+New Features:
+A new AllowInvalid standard built-in action has been added. This +action accepts packets that are in the INVALID connection-tracking +state.
+The range of ports opened by the +AllowTrcrt action has been expanded to 33434:33524 to allow for a +maximum of 30 hops.
+Code mis-ported from 2.2.0 in release 2.0.14 caused the
+following error during "shorewall start" where SYN rate-limiting is
+present in /etc/shorewall/policy:
Bad argument `DROP'
Try `iptables -h' or 'iptables --help'
-for more information.
+for more information.
01/06/2005 - Shorewall 2.2.0 RC4
+
+New
+Features:
A listing of loaded iptables kernel modules is now included in +the output of "shorewall status".
Problems Corrected.
Several problems associated with processing the IPSEC colummn in +/etc/shorewall/masq have been corrected.
01/03/2005 - Shorewall 2.0.14
+
+New
+Features:
Previously, when rate-limiting was specified in
/etc/shorewall/policy (LIMIT:BURST column), any traffic which exceeded
the specified rate was silently dropped. Now, if a log level is given
in the entry (LEVEL column) then drops are logged at that level at a
-rate of 5/min with a burst of 5.
+rate of 5/min with a burst of 5.
Problems Corrected:
A typo in the +/etc/shorewall/interfaces file has been fixed.
+"bad variable" error messages +occurring during "shorewall stop" and "shorewall clear" have been +eliminated.
+A misleading typo in /etc/shorewall/tunnels has been corrected.
The TYPE column for an IPIP tunnel should contain "ipip" rather than
-"ip".
+"ip".
The following error message could appear during "shorewall stop"
or "shorewall clear":
-local: lo:: bad variable name
-
+local: lo:: bad variable name
The rate limiting example in +/etc/shorewall/rules has been changed to use the RATE LIMIT column.
+Entries in /etc/shorewall/masq with +the INTERFACE column containing <ifname>:: (e.g., "eth0::") would +generate a progress message but would not generate an iptables rule.
+A misleading typo in /etc/shorewall/tunnels has been corrected.
-
12/24/2004 -
-Shorewall 2.2.0 RC2
-New Features:
12/24/2004 - Shorewall 2.2.0 RC2
-
By popular demand, the default port for Open VPN tunnels is now +1194 (the IANA-reserved port number for Open VPN).
+12/19/2004 - Shorewall 2.2.0
+RC1
+
+Problems Corrected:
The syntax of the add and delete command has been clarified in +the help summary produced by /sbin/shorewall.
+New Features:
+TCP OpenVPN tunnels are now supported using the 'openvpn' tunnel
type. OpenVPN entries in /etc/shorewall/tunnels have this format:
openvpn[:{tcp|udp}][:<port>]
<zone> <gateway>
-Examples:
-
openvpn:tcp net 1.2.3.4 # TCP tunnel on port 5000+Examples: +
openvpn:3344 net 1.2.3.4 # UDP on port 3344
openvpn:tcp:4455 net 1.2.3.4 # TCP on port 4455
openvpn:tcp net 1.2.3.4 # TCP tunnel on port 5000
openvpn:3344 net 1.2.3.4 # UDP on port 3344
openvpn:tcp:4455 net 1.2.3.4 # TCP on port 4455
A new 'ipsecvpn' script is included in the tarball and in the
RPM. The RPM installs the file in the Documentation directory
(/usr/share/doc/packages/shorewall-2.2.0-0RC1).
@@ -1348,21 +1463,27 @@ time.
- Only the first SPD accessed will be instantiated
at the remote gateway. So while the script creates SPDs to/from the
remote gateway and each network listed in the NETWORKS setting at the
-front of the script, only one of these may be used at a time.
+front of the script, only one of these may be used at a time.
A typo in the +/etc/shorewall/interfaces file has been corrected.
+Previously, the "add" and "delete" commands were generating +incorrect policy matches when policy match support was available.
+New Features:
Recent 2.6 kernels include code that evaluates TCP packets based
on TCP Window analysis. This can cause packets that were previously
classified as NEW or ESTABLISHED to be classified as INVALID.
@@ -1383,10 +1504,10 @@ DROPINVALID option allows INVALID packets to be passed through the
normal rules chains by setting DROPINVALID=No.
If not specified or if specified as empty (e.g., DROPINVALID="") then
-DROPINVALID=Yes is assumed.
-
+DROPINVALID=Yes is assumed.
The "shorewall add" and "shorewall delete" commands now accept a
list of hosts to add or delete.
Examples:
@@ -1398,16 +1519,17 @@ The above commands may also be written:
shorewall add eth1:1.2.3.4,2.3.4.5 z12
shorewall delete eth1:1.2.3.4,2.3.4.5 z12
-
+
12/04/2004 - Shorewall 2.2.0 Beta
+7
+
+Problems Corrected:
The "shorewall add" and "shorewall delete" commands now work in
+a bridged environment. The syntax is:
shorewall
add <interface>[:<port>]:<address> <zone>
@@ -1419,10 +1541,10 @@ delete <interface>[:<port>]:<address> <zone>
shorewall
add br0:eth2:192.168.1.3 OK
shorewall
-delete br0:eth2:192.168.1.3 OK
-
+delete br0:eth2:192.168.1.3 OK
Previously, "shorewall save" created an out-of-sequence restore
script. The commands saved in the user's /etc/shorewall/start script
were executed prior to the Netfilter configuration being restored. This
has been corrected so that "shorewall save" now places those commands
@@ -1435,24 +1557,29 @@ To accomplish this change, the "restore base" file
Netfilter the configuration is restored.
/var/lib/shorewall/restore-tail -- commands to be executed after the
-Netfilter configuration is restored.
-
+Netfilter configuration is restored.
Previously, traffic from the +firewall to a dynamic zone member host did not need to match the +interface specified when the host was added to the zone. For example, +if eth0:1.2.3.4 is added to dynamic zone Z then traffic out of any +firewall interface to 1.2.3.4 will obey the fw->Z policies and +rules. This has been corrected.
+Shorewall uses the temporary chain 'fooX1234' to probe iptables for detrmining which features are supported. Previously, if that chain happened to exist when Shorewall was run, capabilities were -mis-detected.
New Features:
You can now use the "shorewall show zones" command to display
+the current contents of the zones. This is particularly useful if you
+use dynamic zones (DYNAMIC_ZONES=Yes in shorewall.conf).
Example:
@@ -1476,10 +1603,10 @@ eth1:0.0.0.0/0
eth1:0.0.0.0/0
- ursa:/etc/shorewall #
-
+ ursa:/etc/shorewall #
Variable expansion may now be used with the INCLUDE directive.
Example:
@@ -1491,37 +1618,44 @@ FILE=/etc/foo/bar
Any other config file:
-INCLUDE $FILE
-
+INCLUDE $FILE
The output of "shorewall status" now +includes the results of "ip -stat link ls". This helps diagnose +performance problems caused by link errors.
+Previously, when rate-limiting was specified in
/etc/shorewall/policy (LIMIT:BURST column), any traffic which exceeded
the specified rate was silently dropped. Now, if a log
level is given in the entry (LEVEL column) then drops are logged at
-that level at a rate of 5/min with a burst of 5.
+that level at a rate of 5/min with a burst of 5.
/usr/share/shorewall/firewall: line 1: match_destination_hosts: command not found+
A typo in /usr/share/shorewall/firewall caused the "shorewall +add" to issue an error message:
+/usr/share/shorewall/firewall: line 1: match_destination_hosts: command not found
12/01/2004 - Shorewall 2.0.12
+
+Problems
+Corrected:
A typo in shorewall.conf (NETNOTSYN) +has been corrected.
+The "shorewall add" and "shorewall delete" commands now work in
+a bridged environment. The syntax is:
shorewall add
<interface>[:<bridge port>][:<address>] <zone>
@@ -1531,10 +1665,10 @@ bridged environment. The syntax is:
Examples:
shorewall add br0:eth2:192.168.1.3 OK
- shorewall delete br0:eth2:192.168.1.3 OK
-
+ shorewall delete br0:eth2:192.168.1.3 OK
Previously, "shorewall save" created an out-of-sequence restore
script. The commands saved in the user's /etc/shorewall/start script
were executed prior to the Netfilter configuration being restored. This
has been corrected so that "shorewall save" now places those commands
@@ -1547,18 +1681,20 @@ To accomplish this change, the "restore base" file
before the Netfilter configuration is restored.
/var/lib/shorewall/restore-tail -- commands to be executed
-after the Netfilter configuration is restored.
-
+after the Netfilter configuration is restored.
Previously, traffic from the firewall to a dynamic zone member host did not need to match the interface specified when the host was added to the zone. For example, if eth0:1.2.3.4 is added to dynamic zone Z then traffic out of any firewall interface to 1.2.3.4 will obey -the fw->Z policies and rules. This has been corrected.
New Features:
Variable expansion may now be used with the INCLUDE directive.
Example:
@@ -1570,139 +1706,194 @@ FILE=/etc/foo/bar
Any other config file:
-INCLUDE $FILE
+INCLUDE $FILE
Fixed a number of problems +associated with not having an IPTABLES value assigned in shorewall.conf +
+Corrected a 'duplicate chain' error on "shorewall add" when the +'mss' option is present in /etc/shorewall/ipsec.
11/26/2004 - Shorewall 2.2.0 Beta
+5
+
+Problems corrected:
A typo in shorewall.conf (NETNOTSYN) has been corrected.
+New Features:
For consistency, the CLIENT PORT(S) +column in the tcrules file has been renamed SOURCE PORT(S).
+The contents of +/proc/sys/net/ip4/icmp_echo_ignore_all is now shown in the output of +"shorewall status".
+A new IPTABLES option has been added to shorewall.conf. IPTABLES
can be used to designate the iptables executable to be used by
Shorewall. If not specified, the iptables executable determined by the
-PATH setting is used.
+PATH setting is used.
11/23/2004 - Shorewall 2.0.11
+
+Problems
+corrected:
The INSTALL file now include special +instructions for Slackware users.
+The bogons file has been updated.
+Service names are replaced by port +numbers in /etc/shorewall/tos.
+A typo in the install.sh file that caused an error during a new +install has been corrected.
New Features:
The AllowNNTP action now allows NNTP over SSL/TLS (NTTPS).
11/19/2004 - Shorewall 2.2.0 Beta
+4
+
+Problems Corrected:
#MARK/ SOURCE DEST PROTO PORT(S)+
#CLASSIFY
1:30 - eth0 tcp 25
A cut and paste error resulted in +some nonsense in the description of the IPSEC column in +/etc/shorewall/masq.
+A typo in /etc/shorewall/rules has +been corrected.
+The bogons file has been updated.
+The "shorewall add" command previously reported success but did +nothing -- now it works.
New Features:
+The AllowNNTP action now allows NNTP over SSL/TLS (NNTPS).
+11/09/2004 - Shorewall 2.2.0 Beta
+3
+
+Problems Corrected:
Missing '#' in the rfc1918 file has +been corrected.
+The INSTALL file now includes special instructions for Slackware +users.
+New Features:
+In CLASSIFY rules (/etc/shorewall/tcrules), an interface name +may now appear in the DEST column as in:
+#MARK/ SOURCE DEST PROTO PORT(S)+
#CLASSIFY
1:30 - eth0 tcp 25
The "shorewall check" command results in the (harmless) error
message:
/usr/share/shorewall/firewall: line 2753:
-check_dupliate_zones: command not found
-
+check_dupliate_zones: command not found
The AllowNTP standard action now +allows outgoing responses to broadcasts.
+A clarification has been added to the hosts file's description +of the 'ipsec' option pointing out that the option is redundent if the zone named in the ZONE column has been designated an IPSEC zone in the -/etc/shorewall/ipsec file.
New Features:
The SUBNET column in /etc/shorewall/rfc1918 has been renamed
SUBNETS and it is now possible to specify a list of addresses in that
-column.
+column.
10/25/2004 - Shorewall 2.0.10
+
+Problems
+Corrected:
The GATEWAY column was previously +ignored in 'pptpserver' entries in /etc/shorewall/tunnels.
+When log rule numbers are included +in the LOGFORMAT, duplicate rule numbers could previously be generated. +
+The /etc/shorewall/tcrules file now +includes a note to the effect that rule evaluation continues after a +match.
+The error message produced if Shorewall couldn't obtain the +routes through an interface named in the SUBNET column of +/etc/shorewall/masq was less than helpful since it didn't include the +interface name.
New Features:
The "shorewall status" command has been enhanced to include the
values of key /proc settings:
Example from a two-interface firewall:
@@ -1724,84 +1915,102 @@ Example from a two-interface firewall:
/proc/sys/net/ipv4/conf/eth1/rp_filter = 0
/proc/sys/net/ipv4/conf/lo/proxy_arp = 0
/proc/sys/net/ipv4/conf/lo/arp_filter = 0
- /proc/sys/net/ipv4/conf/lo/rp_filter = 0
+ /proc/sys/net/ipv4/conf/lo/rp_filter = 0
http://shorewall.net/pub/shorewall/2.2-Beta/shorewall-2.2.0-Beta1
+10/24/2004 - Shorewall 2.2.0
+Beta1
-10/24/2004 -
-Shorewall 2.2.0 Beta1
-
-The first beta in the 2.2 series is now available. Download
-location is:
-
-The first beta in the 2.2 series is now available.
+Download location is:
+
+ftp://shorewall.net/pub/shorewall/2.2-Beta/shorewall-2.2.0-Beta1
-ftp://shorewall.net/pub/shorewall/2.2-Beta/shorewall-2.2.0-Beta1
-
The features available in this release and the migration
considerations are covered in the release
-notes. Highlights include:
-
9/23/2004 -
-Shorewall 2.0.9
-
-Problems Corrected:
-
The behavior produced by specifying +a log level in an action invocation is now much more rational. +Previously, all packets sent to the action were logged; now each rule +within the invoked action behaves as if logging had been specified on +it.
+Support for the 2.6 Kernel's native +IPSEC implementation is now available.
+Support for ipp2p is included.
+Support for the iptables CONNMARK +facility is now included in Shorewall.
+A new LOGALLNEW option facilitates +problem analysis.
+Users with a large static blacklist +can now defer loading the blacklist until after the rest of the ruleset +has been enabled. Doing so can decrease substantially the amount of +time that connections are disabled during shorewall [re]start.
+Support for the iptables 'iprange +match' feature has been enabled. Users whose kernel and iptables +contain this feature can use ip address ranges in most places in their +Shorewall configuration where a CIDR netowrk can be used.
+Accepting of source routing and +martian logging may now be enabled/disabled on each interface.
+Shorewall now supports the CLASSIFY iptable target.
9/20/2004 – Change in Shorewall Support
-Friends,
-The demands that my job and my -personal life are currently placing on me are such that supporing -Shorewall to the extent that I have been doing is just not possible -any more.
-I will continue to be active on the -development list and will continue to develop Shorewall if at all -possible.
-I will also continue to read the -user's list and will help with problems that interest me. But I am no -longer going to hop on every problem as soon as I see it.
-This change means that I'm going to -have to depend on you folks to help each other; I'm confident that we -can make this work.
-8/22/2004 -
-Shorewall 2.0.8
+
9/23/2004 - Shorewall 2.0.9
-Problems Corrected:
Previously, an empty PROTO column or a value of "all" in that +column would cause errors when processing the /etc/shorewall/tcrules +file.
+New Features:
+The "shorewall status" command now includes the output of "brctl +show" if the bridge tools are installed.
+9/20/2004 – Change in Shorewall +Support
+Friends,
+The demands that my job and my personal life are currently placing +on me are such that supporing Shorewall to the extent that I have +been doing is just not possible any more.
+I will continue to be active on the development list and will +continue to develop Shorewall if at all possible.
+I will also continue to read the user's list and will help with +problems that interest me. But I am no longer going to hop on every +problem as soon as I see it.
+This change means that I'm going to have to depend on you folks to +help each other; I'm confident that we can make this work.
+8/22/2004 - Shorewall 2.0.8
+
+Problems
+Corrected:
Entries in the USER/GROUP column of an action file (made from @@ -2130,7 +2339,7 @@ will generate an error and Shorewall fails to start.
'functions' file from CVS (STABLE/ project for 1.4.10f and STABLE2/ project for 2.0.3a) to prevent startup errors with these versions installed. These updatged files are also available from the Errata -(2.0, 1.4). +(2.0, 1.4).6/23/2004 - Shorewall 2.0.3
Problems
@@ -2346,91 +2555,96 @@ INIT and FIREWALL variables to be specified outside the script as in:
./install.sh
6/3/2004 - Shorewall 2.0.2f
-
Fixes one problem:
-
6/3/2004 - Shorewall 2.0.2f
+Fixes one problem:
Versions 2.0.2d and 2.0.2e fail to load kernel modules unless +MODULE_SUFFIX is set in shorewall.conf
6/2/2004 - Shorewall 2.0.2e
-
One problem corrected:
-
6/2/2004 - Shorewall 2.0.2e
+One problem corrected:
LOG rules within an action generate two Netfilter logging rules.
5/28/2004 - Shorewall 2.0.2d
-One problem corrected:
-
Shorewall was checking capabilities before loading kernel
modules. Consequently, if kernel module autoloading was disabled, the
-capabilities were mis-detected.
+capabilities were mis-detected.
5/21/2004 - Shorewall 2.0.2c
-One problem corrected:One problem corrected:
DNAT rules with a dynamic source zone don't work properly. +When used, these rules cause the rule to be checked against ALL +input, not just input from the designated zone.
5/18/2004 - Shorewall 2.0.2b
+5/18/2004 - Shorewall 2.0.2b
Corrects two problems:
Specifying a null common action in /etc/shorewall/actions (e.g., +:REJECT) results in a startup error.
If /var/lib/shorewall does not exist, shorewall start fails.
5/15/2004 - Shorewall 2.0.2a
-
Corrects two problems:
-
5/15/2004 - Shorewall 2.0.2a
+Corrects two problems:
Temporary restore files were not being removed from
/var/lib/shorewall. These files have names of the form
-'restore-nnnnn'.
-You can remove files that have accumulated with the command:
-
- rm -f /var/lib/shorewall/restore-[0-9]*
+'restore-nnnnn'. You can remove files that have accumulated with
+the command:
+ rm -f /var/lib/shorewall/restore-[0-9]*
The restore script did not load kernel modules. The result was
+that after a cold load, applications like FTP and IRC DCC didn't work.
To correct:
1) Install 2.0.2a
2) "shorewall restart"
- 3) "shorewall save"
5/13/2004 - Shorewall 2.0.2
-Problems Corrected since 2.0.1
-
5/13/2004 - Shorewall 2.0.2
+Problems Corrected since 2.0.1
The /etc/init.d/shorewall script +installed on Debian by install.sh failed silently due to a missing file (/usr/share/shorewall/wait4ifup). That file is not part of the normal -Shorewall distribution and is provided by the Debian maintainer.
A meaningless warning message out of +the proxyarp file processing has been eliminated.
+The "shorewall delete" command now correctly removes all dynamic +rules pertaining to the host(s) being deleted. Thanks to Stefan Engel +for this correction.
+Issues when migrating from Shorewall 2.0.1 to Shorewall 2.0.2:
Extension Scripts -- In order for extension scripts to work
properly with the new iptables-save/restore integration (see New
Feature 1 below), some change may be required to your extension
scripts. If your extension scripts are executing commands other than
@@ -2466,16 +2680,18 @@ quotes. This applies to all of the functions described here.
C. ensure_and_save_command() -- runs the passed command. If the command
fails, the firewall is restored to it's prior saved state and the
operation is terminated. If the command succeeds, the command is
-written to the restore file.
-
+written to the restore file.
Dynamic Zone support -- If you don't need to use the "shorewall +add" and "shorewall delete commands, you should set DYNAMIC_ZONES=No in +/etc/shorewall/shorewall.conf.
New Features:
Shorewall has now been integrated with
iptables-save/iptables-restore to provide very fast start and restart.
The elements of this integration are as follows:
@@ -2504,17 +2720,17 @@ f) If you have previously saved the running configuration and want
Shorewall to discard it, use the 'shorewall forget' command. WARNING:
iptables 1.2.9 is broken with respect to iptables-save; if your kernel
has connection tracking match support, you must patch iptables 1.2.9
-with the iptables patch availale from the Shorewall errata page.
-
+with the iptables patch availale from the Shorewall errata page.
The previous implementation of dynamic zones was difficult to +maintain. I have changed the code to make dynamic zones optional under +the control of the DYNAMIC_ZONES option in +/etc/shorewall/shorewall.conf.
In earlier Shorewall 2.0 releases, Shorewall searches in order
+the following directories for configuration files.
a) The directory specified in a 'try' command or specified using the -c
option.
@@ -2539,26 +2755,25 @@ directory specified via -c or in a try command, in /etc/shorewall or in
For distribution packagers, the default CONFIG_PATH is set in
/usr/share/shorewall/configpath. You can customize this file to have a
-default that differs from mine.
-
+default that differs from mine.
Previously, in /etc/shorewall/nat a Yes (or yes) in the LOCAL
+column would only take effect if the ALL INTERFACES column also
contained Yes or yes. Now, the LOCAL columns contents are treated
-independently of the contents of the ALL INTERFACES column.
-
+independently of the contents of the ALL INTERFACES column.
The folks at Mandrake have created yet another kernel module +naming convention (module names end in "ko.gz"). As a consequence, +beginning with this release, if MODULE_SUFFIX isn't specified in +shorewall.conf, then the default value is "o gz ko o.gz ko.gz".
An updated bogons file is included in this release.
In /etc/shorewall/rules and in action files generated from
/usr/share/shorewall/action.template, rules that perform logging can
specify an optional "log tag". A log tag is a string of alphanumeric
characters and is specified by following the log level with ":" and the
@@ -2576,21 +2791,21 @@ prefix "Shorewall:net2dmz:ACCEPT:" then "ACCEPT:info:ftp" will generate
"Shorewall:net2dmz:ACCEPT:ftp " (note the trailing blank). The maximum
length of a log prefix supported by iptables is 29 characters; if a
larger prefix is generated, Shorewall will issue a warning message and
-will truncate the prefix to 29 characters.
-
+will truncate the prefix to 29 characters.
A new "-q" option has been added to /sbin/shorewall commands. It +causes the start, restart, check and refresh commands to produce much +less output so that warning messages are more visible (when testing +this change, I discovered a bug where a bogus warning message was being +generated).
Shorewall now uses 'modprobe' to load kernel modules if that +utility is available in the PATH; otherwise, 'insmod' is used.
It is now possible to restrict entries in the
/etc/shorewall/masq file to particular protocols and destination
port(s). Two new columns (PROTO and PORT(S)) have been added to the
file.
@@ -2616,66 +2831,70 @@ the progress message at "shorewall start" would be:
To 0.0.0.0/0 (tcp 25) from
10.0.0.0/8 through eth0 using 206.124.146.177
To 0.0.0.0/0 (all) from 10.0.0.0/8
-through eth0 using 206.124.146.176
-
+through eth0 using 206.124.146.176
Two new actions are available in the /etc/shorewall/rules file.
ACCEPT+ -- Behaves like ACCEPT
with the exception that it exempts matching connections from subsequent
DNAT[-] and REDIRECT[-] rules.
NONAT -- Exempts
-matching connections from subsequent DNAT[-] and REDIRECT[-] rules.
-
+matching connections from subsequent DNAT[-] and REDIRECT[-] rules.
A new extension script 'initdone' has been added. This script is +invoked at the same point as the 'common' script was previously and is +useful for users who mis-used that script under Shorewall 1.x (the +script was intended for adding rules to the 'common' chain but many +users treated it as a script for adding rules before Shorewall's).
Installing/Upgrading Shorewall on Slackware has been improved.
+Slackware users must use the tarball and must modify settings in the
+install.sh script before running it as follows:
DEST="/etc/rc.d"
INIT="rc.firewall"
-Thanks to Alex Wilms for helping with this change.
4/17/2004 - Presentation at
-LinuxFest NW
-
4/17/2004 - Presentation at LinuxFest NW
+Today I gave a presentation at LinuxFest NW in Bellingham. The presentation was entitled "Shorewall -and the Enterprise" and described the history of Shorewall and gave -an overview of its features. -
4/5/2004 - Shorewall 2.0.1
-
4/5/2004 - Shorewall 2.0.1
+Problems Corrected since 2.0.0
Using actions in the manner +recommended in the documentation results in a Warning that the rule is +a policy.
+When a zone on a single interface is +defined using /etc/shorewall/hosts, superfluous rules are generated in +the <zone>_frwd chain.
+Thanks to Sean Mathews, a +long-standing problem with Proxy ARP and IPSEC has been corrected. +Thanks Sean!!!
+The "shorewall show log" and "shorewall logwatch" commands +incorrectly displayed type 3 ICMP packets.
Issues when migrating from Shorewall 2.0.0 to Shorewall 2.0.1:
The function of 'norfc1918' is now split between that option and
+a new 'nobogons' option.
The rfc1918 file released with Shorewall now contains entries for only
those three address ranges reserved by RFC 1918. A 'nobogons' interface
@@ -2691,18 +2910,18 @@ The level at which bogon packets are logged is specified in the new
BOGON_LOG_LEVEL variable in shorewall.conf. If that option is not
specified or is specified as empty (e.g, BOGON_LOG_LEVEL="") then bogon
packets whose TARGET is 'logdrop' in /usr/share/shorewall/bogons are
-logged at the 'info' level.
New Features:
+Support for Bridging Firewalls has been added. For details, see
+
+ http://shorewall.net/bridge.html
Support for NETMAP has been added. NETMAP allows NAT to be
defined between two network:
@@ -2713,12 +2932,12 @@ a.b.c.2 -> x.y.z.2
a.b.c.3 -> x.y.z.3
...
- http://shorewall.net/netmap.htm
-
+ http://shorewall.net/netmap.htm
The /sbin/shorewall program now accepts a "-x" option to cause
+iptables to print out the actual packet and byte counts rather than
+abbreviated counts such as "13MB".
Commands affected by this are:
@@ -2731,31 +2950,35 @@ shorewall -x show nat
shorewall -x status
-shorewall -x monitor [ <interval> ]
-
+shorewall -x monitor [ <interval> ]
Shorewall now traps two common zone +definition errors:
Including the firewall zone in a +/etc/shorewall/hosts record.
+Defining an interface for a zone in both +/etc/shorewall/interfaces and /etc/shorewall/hosts.
In the second case, the following will appear during "shorewall
+[re]start" or "shorewall check":
Determining Hosts in Zones...
...
Error: Invalid zone definition for zone
<name of zone>
- Terminated
-
+ Terminated
To support bridging, the following options have been added to
+entries in /etc/shorewall/hosts:
norfc1918
nobogons
@@ -2773,74 +2996,93 @@ the entry refers to a bridge port.
OPTIONS
net
br0:eth0
-norfc1918,nobogons,blacklist,tcpflags,nosmurfs
3/14/2004 - Shorewall 2.0.0b
-Corrects two problems:3/14/2004 - Shorewall 2.0.0a
-Corrects one problem:
-
3/14/2004 - Shorewall 2.0.0b
+Corrects two problems:
+Thanks to Sean Mathews, the +long-standing problem with Proxy ARP and IPSEC has been eliminated!
+The default value of the ALL INTERFACES column in +/etc/shorewall/nat is documented as 'No' but the default continued to +be 'Yes' as it was in Shorewall 1.4.
+3/14/2004 - Shorewall 2.0.0a
+Corrects one problem:
Rules of the form:
<action>
zone1 zone2
-generated a warning stating that the rule was a policy.
+generated a warning stating that the rule was a policy.
3/14/2004 - Shorewall 2.0.0
-
Dedicated to Agnes Van Slyke Eastep: March 14, 1910 - February
-23, 2004
-
Problems Corrected since 1.4.10
+
3/14/2004 - Shorewall 2.0.0
+Dedicated to Agnes Van Slyke Eastep: March 14, 1910 - February 23, +2004
+Problems Corrected since 1.4.10
A blank USER/GROUP column in +/etc/shorewall/tcrules no longer causes a [re]start error.
+The 'fgrep' utility is no longer +required (caused startup problems on LEAF/Bering).
+The "shorewall add" command no +longer inserts rules before checking of the blacklist.
+The 'detectnets' and 'routeback' +options may now be used together with the intended effect.
+The following syntax previously produced an error:
-DNAT z1!z2,z3 z4...
+DNAT z1!z2,z3 z4...
Problems Corrected since RC2
-
-
Problems Corrected since RC2
CONTINUE rules now work again.
+A comment in the rules file has been corrected.
Issues when migrating from Shorewall 1.4.x to Shorewall 2.0.0:
-
Issues when migrating from Shorewall 1.4.x to Shorewall 2.0.0:
The 'dropunclean' and 'logunclean' +interface options are no longer supported. If either option is +specified in /etc/shorewall/interfaces, an threatening message will be +generated.
+The NAT_BEFORE_RULES option has been +removed from shorewall.conf. The behavior of Shorewall is as if +NAT_BEFORE_RULES=No had been specified. In other words, DNAT rules now +always take precidence over one-to-one NAT specifications.
+The default value for the ALL +INTERFACES column in /etc/shorewall/nat has changed. In Shorewall 1.*, +if the column was left empty, a value of "Yes" was assumed. This has +been changed so that a value of "No" is now assumed.
+The following files don't exist in Shorewall 2.0:
/etc/shorewall/common.def
/etc/shorewall/common
/etc/shorewall/icmpdef
@@ -2898,12 +3140,12 @@ Note: The 'dropBcast' and 'dropNonSyn' actions are built into Shorewall
and may not be changed.
Beginning with version 2.0.0-Beta2, Shorewall will only create a chain
-for those actions that are actually used.
-
+for those actions that are actually used.
The /etc/shorewall directory no
+longer contains a 'users' file or a 'usersets' file. Similar
+functionality is now available using user-defined actions.
Now, action files created by copying
/usr/share/shorewall/action.template may specify a USER and or GROUP
@@ -2922,293 +3164,143 @@ may contain:
[!]<user number>:<group name>
[!]<user name>:<group number>
[!]<user name>:<group name>
-
+
It is no longer possible to specify rate limiting in the ACTION +column of /etc/shorewall/rules -- you must use the RATE LIMIT column.
Depending on which method you use to upgrade, if you have your +own version of /etc/shorewall/rfc1918, you may have to take special +action to restore it after the upgrade. Look for /etc/shorewall/rfc1918*, locate the proper file and rename it back to /etc/shorewall/rfc1918. The contents of that file will supercede the -contents of /usr/share/shorewall/rfc1918.
New Features:
-
New Features:
The INCLUDE directive now allows +absolute file names.
+A 'nosmurfs' interface option has +been added to /etc/shorewall/interfaces. When specified for an +interface, this option causes smurfs (packets with a broadcast address +as their source) to be dropped and optionally logged (based on the +setting of a new SMURF_LOG_LEVEL option in shorewall.conf).
+fw->fw traffic may now be +controlled by Shorewall. There is no need to define the loopback +interface in /etc/shorewall/interfaces; you simply add a fw->fw +policy and fw->fw rules. If you have neither a fw->fw policy nor +fw->fw rules, all fw->fw traffic is allowed.
+There is a new PERSISTENT column in +the proxyarp file. A value of "Yes" in this column means that the route +added by Shorewall for this host will remain after a "shorewall stop" +or "shorewall clear".
+"trace" is now a synonym for "debug" in /sbin/shorewall
commands. So to trace the "start" command, you could enter:
shorewall trace start 2> /tmp/trace
-The trace information would be written to the file /tmp/trace.
-
+The trace information would be written to the file /tmp/trace.
When defining an ipsec tunnel in +/etc/shorewall/tunnels, if you follow the tunnel type ("ipsec" or +"ipsecnet") with ":noah" (e.g., "ipsec:noah"), then Shorewall will only +create rules for ESP (protocol 50) and will not create rules for AH +(protocol 51).
+A new DISABLE_IPV6 option has been
+added to shorewall.conf. When this option is set to "Yes", Shorewall
+will set the policy for the IPv6 INPUT, OUTPUT and FORWARD chains to
+DROP during "shorewall [re]start" and "shorewall stop". Regardless of
+the setting of this variable, "shorewall clear" will silently attempt
+to set these policies to ACCEPT.
If this option is not set in your existing shorewall.conf then a
setting of DISABLE_IPV6=No is assumed in which case, Shorewall will not
-touch any IPv6 settings except during "shorewall clear".
The CONTINUE target is now available in action definitions. CONTINUE terminates processing of the current action and returns to the -point where that action was invoked.
2/15/2004 - Shorewall 1.4.10c
-Corrects one problem:
-
2/12/2004 - Shorewall 1.4.10b
-Corrects one problem:
-
Corrects one problem:
+Entries in /etc/shorewall/tcrules with an empty USER/GROUP column +would cause a startup error.
+2/12/2004 - Shorewall 1.4.10b
+Corrects one problem:
In the /etc/shorewall/masq entry “eth0:!10.1.1.150 + 0.0.0.0/0!10.1.0.0/16 10.1.2.16”, the +“!10.1.0.0/16” is ignored.
+2/8/2004 - Shorewall 1.4.10a
-Corrects two problems:
-
2/8/2004 - Shorewall 1.4.10a
+Corrects two problems:
A problem which can cause [re]start +to fail inexplicably while processing /etc/shorewall/masq.
+Interfaces using the Atheros WiFi card to use the 'maclist' +option.
+1/30/2004 - Shorewall 1.4.10
Problems Corrected since version 1.4.9
The column descriptions in the +action.template file did not match the column headings. That has been +corrected.
+The presence of IPV6 addresses on +devices generated error messages during [re]start if ADD_IP_ALIASES=Yes +or ADD_SNAT_ALIASES=Yes are specified in /etc/shorewall/shorewall.conf. +These messages have been eliminated.
+The CONTINUE action in +/etc/shorewall/rules now works correctly. A couple of problems +involving rate limiting have been corrected. These bug fixes courtesy +of Steven Jan Springl.
+Shorewall now tried to avoid sending +an ICMP response to broadcasts and smurfs.
+Specifying "-" or "all" in the PROTO column of an action no +longer causes a startup error.
+Migragion Issues:
None.
-New Features:
+New
+Features:
1/27/2004 - Shorewall 1.4.10 RC3
-http://shorewall.net/pub/shorewall/Beta
-ftp://shorewall.net/pub/shorewall/Beta
-
Problems Corrected since version 1.4.9
-1/24/2004 - Shorewall 1.4.10 RC2
-http://shorewall.net/pub/shorewall/Beta
-ftp://shorewall.net/pub/shorewall/Beta
-
Problems Corrected since version 1.4.9
-1/22/2004 - Shorewall 1.4.10 RC1
-Problems Corrected since version 1.4.9
-The INTERFACE column in the /etc/shorewall/masq file may now
specify a destination list.
Example:
@@ -3218,10 +3310,10 @@ Example:
eth0:192.0.2.3,192.0.2.16/28 eth1
If the list begins with "!" then SNAT will occur only if the
-destination IP address is NOT included in the list.
-
+destination IP address is NOT included in the list.
Output traffic control rules (those with the firewall as the
source) may now be qualified by the effective userid and/or effective
group id of the program generating the output. This feature is courtesy
of Frédéric LESPEZ.
@@ -3235,137 +3327,363 @@ name or number>]
The colon is optionnal when specifying only a user.
Examples : john: / john / :users /
-john:users
+john:users
A "detectnets" interface option has been added for entries in
+/etc/shorewall/interfaces. This option automatically taylors the
+definition of the zone named in the ZONE column to include just
+those hosts that have routes through the interface named in the
+INTERFACE column. The named interface must be UP when Shorewall is
+[re]started.
+
+ WARNING: DO NOT SET THIS OPTION ON YOUR INTERNET INTERFACE!
+
1/13/2004 - Shorewall 1.4.9
-
Problems Corrected since version 1.4.8:
-
1/27/2004 - Shorewall 1.4.10 RC3
+http://shorewall.net/pub/shorewall/Beta
+ftp://shorewall.net/pub/shorewall/Beta
Problems Corrected since version 1.4.9
The column descriptions in the +action.template file did not match the column headings. That has been +corrected.
+The presence of IPV6 addresses on +devices generated error messages during [re]start if ADD_IP_ALIASES=Yes +or ADD_SNAT_ALIASES=Yes are specified in /etc/shorewall/shorewall.conf. +These messages have been eliminated.
+The CONTINUE action in +/etc/shorewall/rules now works correctly. A couple of problems +involving rate limiting have been corrected. These bug fixes courtesy +of Steven Jan Springl.
+Shorewall now tried to avoid sending an ICMP response to +broadcasts and smurfs.
+Migragion Issues:
+
+ None.
+
+New
+Features:
The INTERFACE column in the /etc/shorewall/masq file may now
+specify a destination list.
+
+Example:
+
+ #INTERFACE
+ SUBNET ADDRESS
+ eth0:192.0.2.3,192.0.2.16/28 eth1
+
+If the list begins with "!" then SNAT will occur only if the
+destination IP address is NOT included in the list.
Output traffic control rules (those with the firewall as the
+source) may now be qualified by the effective userid and/or effective
+group id of the program generating the output. This feature is courtesy
+of Frédéric LESPEZ.
+
+A new USER column has been added to /etc/shorewall/tcrules. It may
+contain :
+
+ [<user name or number>]:[<group
+name or number>]
+
+The colon is optionnal when specifying only a user.
+
+ Examples : john: / john / :users /
+john:users
A "detectnets" interface option has been added for entries in
+/etc/shorewall/interfaces. This option automatically taylors the
+definition of the zone named in the ZONE column to include just
+those hosts that have routes through the interface named in the
+INTERFACE column. The named interface must be UP when Shorewall is
+[re]started.
+
+ WARNING: DO NOT SET THIS OPTION ON YOUR INTERNET INTERFACE!
+
1/24/2004 - Shorewall 1.4.10 RC2
+http://shorewall.net/pub/shorewall/Beta
+ftp://shorewall.net/pub/shorewall/Beta
Problems Corrected since version 1.4.9
+The column descriptions in the +action.template file did not match the column headings. That has been +corrected.
+The presence of IPV6 addresses on devices generated error +messages during [re]start if ADD_IP_ALIASES=Yes or ADD_SNAT_ALIASES=Yes +are specified in /etc/shorewall/shorewall.conf. These messages have +been eliminated.
+Migragion Issues:
+
+ None.
+
+New
+Features:
The INTERFACE column in the /etc/shorewall/masq file may now
+specify a destination list.
+
+Example:
+
+ #INTERFACE
+ SUBNET ADDRESS
+ eth0:192.0.2.3,192.0.2.16/28 eth1
+
+If the list begins with "!" then SNAT will occur only if the
+destination IP address is NOT included in the list.
Output traffic control rules (those with the firewall as the
+source) may now be qualified by the effective userid and/or effective
+group id of the program generating the output. This feature is courtesy
+of Frédéric LESPEZ.
+
+A new USER column has been added to /etc/shorewall/tcrules. It may
+contain :
+
+ [<user name or number>]:[<group
+name or number>]
+
+The colon is optionnal when specifying only a user.
+
+ Examples : john: / john / :users /
+john:users
A "detectnets" interface option has been added for entries in
+/etc/shorewall/interfaces. This option automatically taylors the
+definition of the zone named in the ZONE column to include just
+those hosts that have routes through the interface named in the
+INTERFACE column. The named interface must be UP when Shorewall is
+[re]started.
+
+ WARNING: DO NOT SET THIS OPTION ON YOUR INTERNET INTERFACE!
1/22/2004 - Shorewall 1.4.10 RC1
+Problems Corrected since version 1.4.9
+The column descriptions in the +action.template file did not match the column headings. That has been +corrected.
+The presence of IPV6 addresses on devices generated error +messages during [re]start if ADD_IP_ALIASES=Yes or ADD_SNAT_ALIASES=Yes +are specified in /etc/shorewall/shorewall.conf. These messages have +been eliminated.
+Migragion Issues:
+
+ None.
+
+New
+Features:
The INTERFACE column in the /etc/shorewall/masq file may now
+specify a destination list.
+
+Example:
+
+ #INTERFACE
+ SUBNET ADDRESS
+ eth0:192.0.2.3,192.0.2.16/28 eth1
+
+If the list begins with "!" then SNAT will occur only if the
+destination IP address is NOT included in the list.
Output traffic control rules (those with the firewall as the
+source) may now be qualified by the effective userid and/or effective
+group id of the program generating the output. This feature is courtesy
+of Frédéric LESPEZ.
+
+A new USER column has been added to /etc/shorewall/tcrules. It may
+contain :
+
+ [<user name or number>]:[<group
+name or number>]
+
+The colon is optionnal when specifying only a user.
+
+ Examples : john: / john / :users /
+john:users
1/13/2004 - Shorewall 1.4.9
+Problems Corrected since version 1.4.8:
+There has been a low continuing +level of confusion over the terms "Source NAT" (SNAT) and "Static NAT". +To avoid future confusion, all instances of "Static NAT" have been +replaced with "One-to-one NAT" in the documentation and configuration +files.
+The description of NEWNOTSYN in +shorewall.conf has been reworded for clarity.
+Wild-card rules (those involving +"all" as SOURCE or DEST) will no longer produce an error if they +attempt to add a rule that would override a NONE policy. The logic for +expanding these wild-card rules now simply skips those (SOURCE,DEST) +pairs that have a NONE policy.
+DNAT rules that also specified SNAT now work reliably. +Previously, there were cases where the SNAT specification was +effectively ignored.
+Migration Issues:
None.
-New Features:
+New
+Features:
The documentation has been +completely rebased to Docbook XML. The documentation is now released as +separate HTML and XML packages.
+To cut down on the number of "Why +are these ports closed rather than stealthed?" questions, the +SMB-related rules in /etc/shorewall/common.def have been changed from +'reject' to 'DROP'.
+For easier identification, packets +logged under the 'norfc1918' interface option are now logged out of +chains named 'rfc1918'. Previously, such packets were logged under +chains named 'logdrop'.
+Distributors and developers seem to
+be regularly inventing new naming conventions for kernel modules. To
+avoid the need to change Shorewall code for each new convention, the
+MODULE_SUFFIX option has been added to shorewall.conf. MODULE_SUFFIX
+may be set to the suffix for module names in your particular
+distribution. If MODULE_SUFFIX is not set in shorewall.conf, Shorewall
+will use the list "o gz ko o.gz".
+
+To see what suffix is used by your distribution:
+
+ls /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
+
+All of the files listed should have the same suffix (extension). Set
+MODULE_SUFFIX to that suffix.
+
+Examples:
+
+ If all files end in ".kzo" then set
+MODULE_SUFFIX="kzo"
+ If all files end in ".kz.o" then set
+MODULE_SUFFIX="kz.o"
Support for user defined rule
+ACTIONS has been implemented through two new files:
+
+/etc/shorewall/actions - used to list the user-defined ACTIONS.
+/etc/shorewall/action.template - For each user defined <action>,
+copy this file to /etc/shorewall/action.<action> and add the
+appropriate rules for that <action>. Once an <action> has
+been defined, it may be used like any of the builtin ACTIONS (ACCEPT,
+DROP, etc.) in /etc/shorewall/rules.
+
+Example: You want an action that logs a packet at the 'info' level and
+accepts the connection.
+
+In /etc/shorewall/actions, you would add:
+
+ LogAndAccept
+
+You would then copy /etc/shorewall/action.template to
+/etc/shorewall/action.LogAndAccept and in that file, you would add the
+two rules:
+ LOG:info
+ ACCEPT
The default value for NEWNOTSYN in
+shorewall.conf is now "Yes" (non-syn TCP packets that are not part of
+an existing connection are filtered according to the rules and policies
+rather than being dropped). I have made this change for two reasons:
+
+a) NEWNOTSYN=No tends to result in lots of "stuck" connections since
+any timeout during TCP session tear down results in the firewall
+dropping all of the retries.
+
+b) The old default of NEWNOTSYN=No and LOGNEWNOTSYN=info resulted in
+lots of confusing messages when a connection got "stuck". While I could
+have changed the default value of LOGNEWNOTSYN to suppress logging, I
+dislike defaults that silently throw away packets.
The common.def file now contains an entry that silently drops +ICMP packets with a null source address. Ad Koster reported a case +where these were occuring frequently as a result of a broken system on +his external network.
+12/29/2003 - Shorewall 1.4.9 Beta 2
+http://shorewall.net/pub/shorewall/Beta
+ftp://shorewall.net/pub/shorewall/Beta
12/29/2003 - Shorewall 1.4.9 Beta 2
-Problems Corrected since version 1.4.8:
There has been a low continuing +level of confusion over the terms "Source NAT" (SNAT) and "Static NAT". +To avoid future confusion, all instances of "Static NAT" have been +replaced with "One-to-one NAT" in the documentation and configuration +files.
+The description of NEWNOTSYN in +shorewall.conf has been reworded for clarity.
+Wild-card rules (those involving +"all" as SOURCE or DEST) will no longer produce an error if they +attempt to add a rule that would override a NONE policy. The logic for +expanding these wild-card rules now simply skips those (SOURCE,DEST) +pairs that have a NONE policy.
+DNAT rules that also specified SNAT now work reliably.
Previously, there were cases where the SNAT specification was
-effectively ignored.
+effectively ignored.
Migration Issues:
@@ -3373,23 +3691,31 @@ effectively ignored.The documentation has been +completely rebased to Docbook XML. The documentation is now released as +separate HTML and XML packages.
To cut down on the number of "Why +are these ports closed rather than stealthed?" questions, the +SMB-related rules in /etc/shorewall/common.def have been changed from +'reject' to 'DROP'.
+For easier identification, packets +logged under the 'norfc1918' interface option are now logged out of +chains named 'rfc1918'. Previously, such packets were logged under +chains named 'logdrop'.
+Distributors and developers seem to
+be regularly inventing new naming conventions for kernel modules. To
+avoid the need to change Shorewall code for each new convention, the
+MODULE_SUFFIX option has been added to shorewall.conf. MODULE_SUFFIX
+may be set to the suffix for module names in your particular
+distribution. If MODULE_SUFFIX is not set in shorewall.conf, Shorewall
+will use the list "o gz ko o.gz".
To see what suffix is used by your distribution:
@@ -3403,9 +3729,11 @@ Examples:
If all files end in ".kzo" then set
MODULE_SUFFIX="kzo"
If all files end in ".kz.o" then set
-MODULE_SUFFIX="kz.o"
Support for user defined rule
+ACTIONS has been implemented through two new files:
/etc/shorewall/actions - used to list the user-defined ACTIONS.
/etc/shorewall/action.template - For each user defined <action>,
@@ -3423,14 +3751,14 @@ In /etc/shorewall/actions, you would add:
You would then copy /etc/shorewall/action.template to
/etc/shorewall/action.LogAndAccept and in that file, you would add the
-two
-rules:
+two rules:
LOG:info
- ACCEPT
+ ACCEPT
The default value for NEWNOTSYN in shorewall.conf is now "Yes"
+(non-syn TCP packets that are not part of an existing connection are
+filtered according to the rules and policies rather than being
dropped). I have made this change for two reasons:
a) NEWNOTSYN=No tends to result in lots of "stuck" connections since
@@ -3440,53 +3768,64 @@ dropping all of the retries.
b) The old default of NEWNOTSYN=No and LOGNEWNOTSYN=info resulted in
lots of confusing messages when a connection got "stuck". While I could
have changed the default value of LOGNEWNOTSYN to suppress logging, I
-dislike defaults that silently throw away packets.
-
+dislike defaults that silently throw away packets.
12/28/2003 - www.shorewall.net/ftp.shorewall.net Back
-On-line
-
Our high-capacity server has been restored to service -- -please let us know if you -find any problems.
-12/29/2003 - Shorewall 1.4.9 Beta 1
-Our high-capacity server has been restored to service -- please +let us know if you find +any problems.
+12/29/2003 - Shorewall 1.4.9 Beta 1
+http://shorewall.net/pub/shorewall/Beta
ftp://shorewall.net/pub/shorewall/Beta
-
Problems Corrected since version 1.4.8:
There has been a low continuing +level of confusion over the terms "Source NAT" (SNAT) and "Static NAT". +To avoid future confusion, all instances of "Static NAT" have been +replaced with "One-to-one NAT" in the documentation and configuration +files.
+The description of NEWNOTSYN in +shorewall.conf has been reworded for clarity.
+Wild-card rules (those involving "all" as SOURCE or DEST) will +no longer produce an error if they attempt to add a rule that would +override a NONE policy. The logic for expanding these wild-card rules +now simply skips those (SOURCE,DEST) pairs that have a NONE policy.
+Migration Issues:
None.
New Features:
To cut down on the number of "Why +are these ports closed rather than stealthed?" questions, the +SMB-related rules in /etc/shorewall/common.def have been changed from +'reject' to 'DROP'.
+For easier identification, packets +logged under the 'norfc1918' interface option are now logged out of +chains named 'rfc1918'. Previously, such packets were logged under +chains named 'logdrop'.
+Distributors and developers seem to
+be regularly inventing new naming conventions for kernel modules. To
+avoid the need to change Shorewall code for each new convention, the
+MODULE_SUFFIX option has been added to shorewall.conf. MODULE_SUFFIX
+may be set to the suffix for module names in your particular
+distribution. If MODULE_SUFFIX is not set in shorewall.conf, Shorewall
+will use the list "o gz ko o.gz".
To see what suffix is used by your distribution:
@@ -3500,9 +3839,11 @@ Examples:
If all files end in ".kzo" then set
MODULE_SUFFIX="kzo"
If all files end in ".kz.o" then set
-MODULE_SUFFIX="kz.o"
Support for user defined rule
+ACTIONS has been implemented through two new files:
/etc/shorewall/actions - used to list the user-defined ACTIONS.
/etc/shorewall/action.template - For each user defined <action>,
@@ -3520,14 +3861,14 @@ In /etc/shorewall/actions, you would add:
You would then copy /etc/shorewall/action.template to
/etc/shorewall/action.LogAndAccept and in that file, you would add the
-two
-rules:
+two rules:
LOG:info
- ACCEPT
+ ACCEPT
The default value for NEWNOTSYN in shorewall.conf is now "Yes"
+(non-syn TCP packets that are not part of an existing connection are
+filtered according to the rules and policies rather than being
dropped). I have made this change for two reasons:
a) NEWNOTSYN=No tends to result in lots of "stuck" connections since
@@ -3537,103 +3878,124 @@ dropping all of the retries.
b) The old default of NEWNOTSYN=No and LOGNEWNOTSYN=info resulted in
lots of confusing messages when a connection got "stuck". While I could
have changed the default value of LOGNEWNOTSYN to suppress logging, I
-dislike defaults that silently throw away packets.
12/03/2003 - Support Torch Passed
-Effective today, I am reducing my participation in the day-to-day +Effective today, I am reducing my participation in the day-to-day support of Shorewall. As part of this shift to community-based Shorewall support a new Shorewall Newbies mailing list has been established to field questions and problems from new users. I will not monitor that list personally. I -will continue my active development of Shorewall and will be available -via the development list to handle development issues -- Tom. +will continue my active development of Shorewall and will be +available via the development list to handle development issues -- +Tom.
11/07/2003 - Shorewall 1.4.8
-Problems Corrected since version 1.4.7:
-
Tuomo Soini has supplied a
+correction to a problem that occurs using some versions of 'ash'. The
+symptom is that "shorewall start" fails with:
local: --limit: bad variable name
iptables v1.2.8: Couldn't load match
`-j':/lib/iptables/libipt_-j.so:
- cannot open shared object file: No such file or
-directory
+ cannot open shared object file: No such file or directory
Try `iptables -h' or 'iptables --help' for more
-information.
Andres Zhoglo has supplied a correction that avoids trying to
use the multiport match iptables facility on ICMP rules.
- Example of rule that previously caused "shorewall
-start" to fail:
+ Example of rule that previously caused "shorewall start"
+to fail:
ACCEPT loc $FW
-icmp 0,8,11,12
-
+icmp 0,8,11,12
Previously, if the following error message was issued, Shorewall
+was left in an inconsistent state.
- Error: Unable to determine the routes through
-interface xxx
-
+ Error: Unable to determine the routes through interface xxx
Handling of the LOGUNCLEAN option in +shorewall.conf has been corrected.
+In Shorewall 1.4.2, an optimization +was added. This optimization involved creating a chain named +"<zone>_frwd" for most zones defined using the +/etc/shorewall/hosts file. It has since been discovered that in many +cases these new chains contain redundant rules and that the +"optimization" turns out to be less than optimal. The implementation +has now been corrected.
+When the MARK value in a tcrules +entry is followed by ":F" or ":P", the ":F" or ":P" was previously only +applied to the first Netfilter rule generated by the entry. It is now +applied to all entries.
+An incorrect comment concerning +Debian's use of the SUBSYSLOCK option has been removed from +shorewall.conf.
+Previously, neither the +'routefilter' interface option nor the ROUTE_FILTER parameter were +working properly. This has been corrected (thanks to Eric Bowles for +his analysis and patch). The definition of the ROUTE_FILTER option has +changed however. Previously, ROUTE_FILTER=Yes was documented as +enabling route filtering on all interfaces (which didn't work). +Beginning with this release, setting ROUTE_FILTER=Yes will enable route +filtering of all interfaces brought up while Shorewall is started. As a consequence, ROUTE_FILTER=Yes can coexist with the use of the -'routefilter' option in the interfaces file.
If MAC verification was enabled on +an interface with a /32 address and a broadcast address then an error +would occur during startup.
+The NONE policy's intended use is to +suppress the generating of rules that can't possibly be traversed. This +means that a policy of NONE is inappropriate where the source or +destination zone is $FW or "all". Shorewall now generates an error +message if such a policy is given in /etc/shorewall/policy. Previously +such a policy caused "shorewall start" to fail.
+The 'routeback' option was broken for wildcard interfaces (e.g., +"tun+"). This has been corrected so that 'routeback' now works as +expected in this case.
Migration Issues:
The definition of the ROUTE_FILTER option in shorewall.conf has +changed as described in item 8) above.
New Features:
A new QUEUE action has been
+introduced for rules. QUEUE allows you to pass connection requests to a
+user-space filter such as ftwall (http://p2pwall.sourceforge.net). The
+ftwall program allows for effective filtering of p2p applications such
+as Kazaa. For example, to use ftwall to filter P2P clients in the 'loc'
+zone, you would add the following rules:
QUEUE loc
net tcp
@@ -3642,104 +4004,121 @@ would add the following rules:
QUEUE loc
fw udp
-You would normally want to place those three rules BEFORE any
-ACCEPT rules for loc->net udp or tcp.
+You would normally want to place those three rules BEFORE any ACCEPT
+rules for loc->net udp or tcp.
Note: When the protocol specified is TCP ("tcp", "TCP" or "6"),
Shorewall will only pass connection requests (SYN packets) to user
-space. This is for compatibility with ftwall.
A BLACKLISTNEWNONLY option has been
+added to shorewall.conf. When this option is set to "Yes", the
+blacklists (dynamic and static) are only consulted for new connection
+requests. When set to "No" (the default if the variable is not set),
+the blacklists are consulted on every packet.
Setting this option to "No" allows blacklisting to stop existing
connections from a newly blacklisted host but is more expensive in
terms of packet processing time. This is especially true if the
-blacklists contain a large number of entries.
Chain names used in the /etc/shorewall/accounting file may now +begin with a digit ([0-9]) and may contain embedded dashes ("-").
+10/30/2003 - Shorewall 1.4.8 RC1
-
10/30/2003 - Shorewall 1.4.8 RC1
+Given the small number of new features and the relatively few +lines of code that were changed, there will be no Beta for 1.4.8.
http://shorewall.net/pub/shorewall/Beta
ftp://shorewall.net/pub/shorewall/Beta
-Problems Corrected since version 1.4.7:
-
Tuomo Soini has supplied a
+correction to a problem that occurs using some versions of 'ash'. The
+symptom is that "shorewall start" fails with:
local: --limit: bad variable name
iptables v1.2.8: Couldn't load match
`-j':/lib/iptables/libipt_-j.so:
- cannot open shared object file: No such file or
-directory
+ cannot open shared object file: No such file or directory
Try `iptables -h' or 'iptables --help' for more
-information.
Andres Zhoglo has supplied a correction that avoids trying to
use the multiport match iptables facility on ICMP rules.
- Example of rule that previously caused "shorewall
-start" to fail:
+ Example of rule that previously caused "shorewall start"
+to fail:
ACCEPT loc $FW
-icmp 0,8,11,12
-
+icmp 0,8,11,12
Previously, if the following error message was issued, Shorewall
+was left in an inconsistent state.
- Error: Unable to determine the routes through
-interface xxx
-
+ Error: Unable to determine the routes through interface xxx
Handling of the LOGUNCLEAN option in +shorewall.conf has been corrected.
+In Shorewall 1.4.2, an optimization +was added. This optimization involved creating a chain named +"<zone>_frwd" for most zones defined using the +/etc/shorewall/hosts file. It has since been discovered that in many +cases these new chains contain redundant rules and that the +"optimization" turns out to be less than optimal. The implementation +has now been corrected.
+When the MARK value in a tcrules +entry is followed by ":F" or ":P", the ":F" or ":P" was previously only +applied to the first Netfilter rule generated by the entry. It is now +applied to all entries.
+An incorrect comment concerning +Debian's use of the SYBSYSLOCK option has been removed from +shorewall.conf.
+Previously, neither the 'routefilter' interface option nor the +ROUTE_FILTER parameter were working properly. This has been corrected +(thanks to Eric Bowles for his analysis and patch). The definition of +the ROUTE_FILTER option has changed however. Previously, +ROUTE_FILTER=Yes was documented as enabling route filtering on all +interfaces (which didn't work). Beginning with this release, setting +ROUTE_FILTER=Yes will enable route filtering of all interfaces brought +up while Shorewall is started. As a consequence, ROUTE_FILTER=Yes can +coexist with the use of the 'routefilter' option in the interfaces +file.
Migration Issues:
The definition of the ROUTE_FILTER option in shorewall.conf has +changed as described in item 8) above.
+New Features:
+A new QUEUE action has been
+introduced for rules. QUEUE allows you to pass connection requests to a
+user-space filter such as ftwall (http://p2pwall.sourceforge.net). The
+ftwall program allows for effective filtering of p2p applications such
+as Kazaa. For example, to use ftwall to filter P2P clients in the 'loc'
+zone, you would add the following rules:
QUEUE loc
net tcp
@@ -3748,238 +4127,277 @@ would add the following rules:
QUEUE loc
fw udp
-You would normally want to place those three rules BEFORE any
-ACCEPT rules for loc->net udp or tcp.
+You would normally want to place those three rules BEFORE any ACCEPT
+rules for loc->net udp or tcp.
Note: When the protocol specified is TCP ("tcp", "TCP" or "6"),
Shorewall will only pass connection requests (SYN packets) to user
-space. This is for compatibility with ftwall.
A BLACKLISTNEWNONLY option has been
+added to shorewall.conf. When this option is set to "Yes", the
+blacklists (dynamic and static) are only consulted for new connection
+requests. When set to "No" (the default if the variable is not set),
+the blacklists are consulted on every packet.
Setting this option to "No" allows blacklisting to stop existing
connections from a newly blacklisted host but is more expensive in
terms of packet processing time. This is especially true if the
-blacklists contain a large number of entries.
Chain names used in the /etc/shorewall/accounting file may now +begin with a digit ([0-9]) and may contain embedded dashes ("-").
10/26/2003 - Shorewall 1.4.7a and 1.4.7b win brown paper bag
-awards Shorewall
+awards Shorewall
1.4.7c released.
The saga with "<zone>_frwd" chains continues. The 1.4.7c +script produces a ruleset that should work for everyone even if it is +not quite optimal. My apologies for this ongoing mess.
10/24/2003 - Shorewall 1.4.7b
-This is a bugfx rollup of the 1.4.7a fixes plus:This is a bugfx rollup of the 1.4.7a fixes plus:
The fix for problem 5 in 1.4.7a was wrong with the result that +"<zone>_frwd" chains might contain too few rules. That wrong code +is corrected in this release.
10/21/2003 - Shorewall 1.4.7a
-
This is a bugfix rollup of the following problem
-corrections:
-
10/21/2003 - Shorewall 1.4.7a
+This is a bugfix rollup of the following problem corrections:
Tuomo Soini has supplied a correction to a problem that occurs
using some versions of 'ash'. The symptom is that "shorewall start"
fails with:
local: --limit: bad variable name
iptables v1.2.8: Couldn't load match
`-j':/lib/iptables/libipt_-j.so:
- cannot open shared object file: No such file or
-directory
+ cannot open shared object file: No such file or directory
Try `iptables -h' or 'iptables --help' for more
-information.
-
+information.
Andres Zhoglo has supplied a correction that avoids trying to
use the multiport match iptables facility on ICMP rules.
- Example of rule that previously caused "shorewall
-start" to fail:
+ Example of rule that previously caused "shorewall start"
+to fail:
ACCEPT loc $FW
-icmp 0,8,11,12
-
+icmp 0,8,11,12
Previously, if the following error message was issued, Shorewall
+was left in an inconsistent state.
- Error: Unable to determine the routes through
-interface xxx
-
+ Error: Unable to determine the routes through interface xxx
Handling of the LOGUNCLEAN option in +shorewall.conf has been corrected.
+In Shorewall 1.4.2, an optimization +was added. This optimization involved creating a chain named +"<zone>_frwd" for most zones defined using the +/etc/shorewall/hosts file. It has since been discovered that in many +cases these new chains contain redundant rules and that the +"optimization" turns out to be less than optimal. The implementation +has now been corrected.
+When the MARK value in a tcrules entry is followed by ":F" or
":P", the ":F" or ":P" was previously only applied to the first
-Netfilter rule generated by the entry. It is now applied to all
-entries.
+Netfilter rule generated by the entry. It is now applied to all entries.
10/06/2003 - Shorewall 1.4.7
-
10/06/2003 - Shorewall 1.4.7
+Problems Corrected since version 1.4.6 (Those in bold font were +corrected since 1.4.7 RC2).
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
-The firewall script has been modified to eliminate the error
-messages
Interface-specific dynamic +blacklisting chains are now displayed by "shorewall monitor" on the +"Dynamic Chains" page (previously named "Dynamic Chain").
+Thanks to Henry Yang, LOGRATE and +LOGBURST now work again.
+The 'shorewall reject' and +'shorewall drop' commands now delete any existing rules for the subject +IP address before adding a new DROP or REJECT rule. Previously, there +could be many rules for the same IP address in the dynamic chain so +that multiple 'allow' commands were required to re-enable traffic +to/from the address.
+When ADD_SNAT_ALIASES=Yes in shorewall.conf, the following entry
+in /etc/shorewall/masq resulted in a startup error:
eth0 eth1
-206.124.146.20-206.124.146.24
-
+206.124.146.20-206.124.146.24
Shorewall previously choked over +IPV6 addresses configured on interfaces in contexts where Shorewall +needed to detect something about the interface (such as when "detect" +appears in the BROADCAST column of the /etc/shorewall/interfaces file). +
+Shorewall will now load module files +that are formed from the module name by appending ".o.gz".
+When Shorewall adds a route to a +proxy ARP host and such a route already exists, two routes resulted +previously. This has been corrected so that the existing route is +replaced if it already exists.
+The rfc1918 file has been updated to +reflect recent allocations.
+The documentation of the USER SET +column in the rules file has been corrected.
+If there is no policy defined for the zones specified in a rule,
+the firewall script previously encountered a shell syntax error:
- [: NONE: unexpected
-operator
+ [: NONE: unexpected operator
Now, the absence of a policy generates an error message and the
firewall is stopped:
- No policy defined from
-zone <source> to zone <dest>
-
+ No policy defined from zone
+<source> to zone <dest>
Previously, if neither
+/etc/shorewall/common nor /etc/shorewall/common.def existed, Shorewall
+would fail to start and would not remove the lock file. Failure to
+remove the lock file resulted in the following during subsequent
+attempts to start:
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf...
- Giving up on lock file
-/var/lib/shorewall/lock
+ Giving up on lock file /var/lib/shorewall/lock
Shorewall Not Started
-Shorewall now reports a fatal error if neither of these two files
-exist and correctly removes the lock fille.
The order of processing the various +options has been changed such that blacklist entries now take +precedence over the 'dhcp' interface setting.
+The log message generated from the +'logunclean' interface option has been changed to reflect a disposition +of LOG rather than DROP.
+When a user name and/or a group name was specified in the
+USER SET column and the destination zone was qualified with a IP
+address, the user and/or group name was not being used to qualify the
+rule.
Example:
- ACCEPT fw net:192.0.2.12 tcp 23 - - -
-vladimir:
-
-
The /etc/shorewall/masq file has had the spurious "/" +character at the front removed.
Migration Issues:
Shorewall IP Traffic Accounting has +changed since snapshot 20030813 -- see the Accounting Page for details.
+The Uset Set capability introduced +in SnapShot 20030821 has changed -- see the User Set page for details.
+The per-interface Dynamic Blacklisting facility introduced in +the first post-1.4.6 Snapshot has been removed. The facility had too +many idiosyncrasies for dial-up users to be a viable part of Shorewall.
+New Features:
+Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -3993,78 +4411,85 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG
+rules defined in /etc/shorewall/rules may now be rate-limited. For DNAT
+and REDIRECT rules, rate limiting occurs in the nat table DNAT rule;
+the corresponding ACCEPT rule in the filter table is not rate limited.
+If you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
- Warning: When rate
-limiting is specified on a rule with "all" in the SOURCE or DEST
-fields, the limit will apply to each pair of zones individually
-rather than as a single limit for all pairs of covered by the
-rule.
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
To specify a rate limit,
@@ -4075,22 +4500,20 @@ a) Follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
where
- <rate> is the sustained rate
-per <interval>
- <interval> is "sec" or
-"min"
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
<burst> is the largest burst
-accepted within an <interval>. If not given, the default of 5
-is assumed.
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
-There may be no white space between the ACTION and "<" nor there
-may be any white space within the burst specification. If you want
-to specify logging of a rate-limited rule, the ":" and log level
-comes after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
-b) A new RATE LIMIT column has been added to the
-/etc/shorewall/rules file. You may specify the rate limit there in
-the format:
+b) A new RATE LIMIT column has been added to the /etc/shorewall/rules
+file. You may specify the rate limit there in the format:
<rate>/<interval>[:<burst>]
@@ -4102,156 +4525,195 @@ ACCEPT<2/sec:4>
net dmz
tcp 80
-The first time this rule is reached, the packet will be accepted;
-in fact, since the burst is 4, the first four packets will be
-accepted. After this, it will be 500ms (1 second divided by the
-rate
-of 2) before a packet will be accepted from this rule, regardless
-of how many packets reach it. Also, every 500ms which passes
-without matching a packet, one of the bursts will be regained; if
-no packets hit the rule for 2 second, the burst will be fully
-recharged; back where we started.
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
Multiple chains may now be displayed +in one "shorewall show" command (e.g., shorewall show INPUT FORWARD +OUTPUT).
+Output rules (those with $FW as the SOURCE) may now be limited +to a set of local users and/or groups. See http://shorewall.net/UserSets.html +for details.
10/02/2003 - Shorewall 1.4.7 RC2
-
10/02/2003 - Shorewall 1.4.7 RC2
http://shorewall.net/pub/shorewall/Beta
-ftp://shorewall.net/pub/shorewall/Beta
-
Problems Corrected since version 1.4.6 (Those in bold font were +corrected since 1.4.7 RC 1).
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
-The firewall script has been modified to eliminate the error
-messages
Interface-specific dynamic +blacklisting chains are now displayed by "shorewall monitor" on the +"Dynamic Chains" page (previously named "Dynamic Chain").
+Thanks to Henry Yang, LOGRATE and +LOGBURST now work again.
+The 'shorewall reject' and +'shorewall drop' commands now delete any existing rules for the subject +IP address before adding a new DROP or REJECT rule. Previously, there +could be many rules for the same IP address in the dynamic chain so +that multiple 'allow' commands were required to re-enable traffic +to/from the address.
+When ADD_SNAT_ALIASES=Yes in shorewall.conf, the following entry
+in /etc/shorewall/masq resulted in a startup error:
eth0 eth1
-206.124.146.20-206.124.146.24
-
+206.124.146.20-206.124.146.24
Shorewall previously choked over +IPV6 addresses configured on interfaces in contexts where Shorewall +needed to detect something about the interface (such as when "detect" +appears in the BROADCAST column of the /etc/shorewall/interfaces file). +
+Shorewall will now load module files +that are formed from the module name by appending ".o.gz".
+When Shorewall adds a route to a +proxy ARP host and such a route already exists, two routes resulted +previously. This has been corrected so that the existing route is +replaced if it already exists.
+The rfc1918 file has been updated to +reflect recent allocations.
+The documentation of the USER SET +column in the rules file has been corrected.
+If there is no policy defined for the zones specified in a
+rule, the firewall script previously encountered a shell syntax error:
- [: NONE: unexpected
-operator
+ [: NONE: unexpected operator
Now, the absence of a policy generates an error message and the
firewall is stopped:
- No policy defined from
-zone <source> to zone <dest>
-
-
Previously, if neither
+/etc/shorewall/common nor /etc/shorewall/common.def existed, Shorewall
+would fail to start and would not remove the lock file. Failure to
+remove the lock file resulted in the following during subsequent
+attempts to start:
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf...
- Giving up on lock file
-/var/lib/shorewall/lock
+ Giving up on lock file /var/lib/shorewall/lock
Shorewall Not Started
-Shorewall now reports a fatal error if neither of these two files
-exist and correctly removes the lock fille.
The order of processing the +various options has been changed such that blacklist entries now take +precedence over the 'dhcp' interface setting.
+The log message generated from the 'logunclean' interface option has been changed to reflect a -disposition of LOG rather than DROP.
The RFC1918 file has been updated to reflect recent IANA +allocations.
Migration Issues:
Shorewall IP Traffic Accounting has +changed since snapshot 20030813 -- see the Accounting Page for details.
+The Uset Set capability introduced +in SnapShot 20030821 has changed -- see the User Set page for details.
+The per-interface Dynamic Blacklisting facility introduced in +the first post-1.4.6 Snapshot has been removed. The facility had too +many idiosyncrasies for dial-up users to be a viable part of Shorewall.
+New Features:
+Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -4265,78 +4727,85 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG
+rules defined in /etc/shorewall/rules may now be rate-limited. For DNAT
+and REDIRECT rules, rate limiting occurs in the nat table DNAT rule;
+the corresponding ACCEPT rule in the filter table is not rate limited.
+If you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
- Warning: When rate
-limiting is specified on a rule with "all" in the SOURCE or DEST
-fields, the limit will apply to each pair of zones individually
-rather than as a single limit for all pairs of covered by the
-rule.
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
To specify a rate limit,
@@ -4347,22 +4816,20 @@ a) Follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
where
- <rate> is the sustained rate
-per <interval>
- <interval> is "sec" or
-"min"
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
<burst> is the largest burst
-accepted within an <interval>. If not given, the default of 5
-is assumed.
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
-There may be no white space between the ACTION and "<" nor there
-may be any white space within the burst specification. If you want
-to specify logging of a rate-limited rule, the ":" and log level
-comes after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
-b) A new RATE LIMIT column has been added to the
-/etc/shorewall/rules file. You may specify the rate limit there in
-the format:
+b) A new RATE LIMIT column has been added to the /etc/shorewall/rules
+file. You may specify the rate limit there in the format:
<rate>/<interval>[:<burst>]
@@ -4374,347 +4841,409 @@ ACCEPT<2/sec:4>
net dmz
tcp 80
-The first time this rule is reached, the packet will be accepted;
-in fact, since the burst is 4, the first four packets will be
-accepted. After this, it will be 500ms (1 second divided by the
-rate
-of 2) before a packet will be accepted from this rule, regardless
-of how many packets reach it. Also, every 500ms which passes
-without matching a packet, one of the bursts will be regained; if
-no packets hit the rule for 2 second, the burst will be fully
-recharged; back where we started.
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
Multiple chains may now be displayed +in one "shorewall show" command (e.g., shorewall show INPUT FORWARD +OUTPUT).
+Output rules (those with $FW as the SOURCE) may now be limited +to a set of local users and/or groups. See http://shorewall.net/UserSets.html +for details.
9/18/2003 - Shorewall 1.4.7 RC 1
-
9/18/2003 - Shorewall 1.4.7 RC 1
http://shorewall.net/pub/shorewall/Beta
-ftp://shorewall.net/pub/shorewall/Beta
-
Problems Corrected since version 1.4.6 (Those in bold font were +corrected since 1.4.7 Beta 1).
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
-The firewall script has been modified to eliminate the error
-messages
Interface-specific dynamic +blacklisting chains are now displayed by "shorewall monitor" on the +"Dynamic Chains" page (previously named "Dynamic Chain").
+Thanks to Henry Yang, LOGRATE and +LOGBURST now work again.
+The 'shorewall reject' and +'shorewall drop' commands now delete any existing rules for the subject +IP address before adding a new DROP or REJECT rule. Previously, there +could be many rules for the same IP address in the dynamic chain so +that multiple 'allow' commands were required to re-enable traffic +to/from the address.
+When ADD_SNAT_ALIASES=Yes in shorewall.conf, the following entry
+in /etc/shorewall/masq resulted in a startup error:
+
+ eth0 eth1
+206.124.146.20-206.124.146.24
Shorewall previously choked over +IPV6 addresses configured on interfaces in contexts where Shorewall +needed to detect something about the interface (such as when "detect" +appears in the BROADCAST column of the /etc/shorewall/interfaces file). +
+Shorewall will now load module files +that are formed from the module name by appending ".o.gz".
+When Shorewall adds a route to a +proxy ARP host and such a route already exists, two routes resulted +previously. This has been corrected so that the existing route is +replaced if it already exists.
+The rfc1918 file has been updated to reflect recent +allocations.
+Migration Issues:
+Shorewall IP Traffic Accounting has +changed since snapshot 20030813 -- see the Accounting Page for details.
+The Uset Set capability introduced +in SnapShot 20030821 has changed -- see the User Set page for details.
+The per-interface Dynamic Blacklisting facility introduced in +the first post-1.4.6 Snapshot has been removed. The facility had too +many idiosyncrasies for dial-up users to be a viable part of Shorewall.
+New Features:
+Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
+
+With ADMINISABSENTMINDED=Yes (the default for new installs), in
+addition to traffic to/from the hosts listed in
+/etc/shorewall/routestopped, Shorewall will allow:
+
+ a) All traffic originating from the firewall itself; and
+ b) All traffic that is part of or related to an
+already-existing connection.
+
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
+
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
+
+ Example:
+
+ /etc/shorewall/nat:
+
+ 206.124.146.178
+eth0:0 192.168.1.5
+
+ /etc/shorewall/rules:
+
+ ACCEPT net
+loc:192.168.1.5 tcp 22
+ ACCEPT loc
+fw tcp 22
+
+From a remote system, I ssh to 206.124.146.178 which establishes an SSH
+connection with local system 192.168.1.5. I then create a second SSH
+connection from that computer to the firewall and confidently type
+"shorewall stop". As part of its stop processing, Shorewall removes
+eth0:0 which kills my SSH connection to 192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
+
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
+
+In the /etc/shorewall/tunnels file, you can have entries of the form:
+
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
+
+where:
+
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
+ <ip address> is the IP
+address of the remote tunnel gateway.
+ <gateway zone>
+Optional. A comma-separated list of zone names. If specified, the
+remote gateway is to be considered part of these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG
+rules defined in /etc/shorewall/rules may now be rate-limited. For DNAT
+and REDIRECT rules, rate limiting occurs in the nat table DNAT rule;
+the corresponding ACCEPT rule in the filter table is not rate limited.
+If you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
+
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
+
+To specify a rate limit,
+
+a) Follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
+
+ <
+<rate>/<interval>[:<burst>] >
+
+ where
+
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
+ <burst> is the largest burst
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
+
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+
+b) A new RATE LIMIT column has been added to the /etc/shorewall/rules
+file. You may specify the rate limit there in the format:
+
+
+<rate>/<interval>[:<burst>]
+
+Let's take an example:
+
+
+ACCEPT<2/sec:4>
+net dmz
+tcp 80
+
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
Multiple chains may now be displayed +in one "shorewall show" command (e.g., shorewall show INPUT FORWARD +OUTPUT).
+Output rules (those with $FW as the SOURCE) may now be limited +to a set of local users and/or groups. See http://shorewall.net/UserSets.html +for details.
+9/15/2003 - Shorewall 1.4.7 Beta 2
+http://shorewall.net/pub/shorewall/Beta
+ftp://shorewall.net/pub/shorewall/Beta
Problems Corrected since version 1.4.6 (Those in bold font were +corrected since 1.4.7 Beta 1).
+Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
+
+The firewall script has been modified to eliminate the error messages
Interface-specific dynamic +blacklisting chains are now displayed by "shorewall monitor" on the +"Dynamic Chains" page (previously named "Dynamic Chain").
+Thanks to Henry Yang, LOGRATE and +LOGBURST now work again.
+The 'shorewall reject' and +'shorewall drop' commands now delete any existing rules for the subject +IP address before adding a new DROP or REJECT rule. Previously, there +could be many rules for the same IP address in the dynamic chain so +that multiple 'allow' commands were required to re-enable traffic +to/from the address.
+When ADD_SNAT_ALIASES=Yes in shorewall.conf, the following
entry in /etc/shorewall/masq resulted in a startup error:
eth0 eth1
-206.124.146.20-206.124.146.24
-
+206.124.146.20-206.124.146.24
9/15/2003 - Shorewall 1.4.7 Beta 2
-
http://shorewall.net/pub/shorewall/Beta
-ftp://shorewall.net/pub/shorewall/Beta
-
Shorewall previously choked over IPV6 addresses configured on interfaces in contexts where Shorewall -needed to detect something about the interface (such as when -"detect" appears in the BROADCAST column of the -/etc/shorewall/interfaces file).
Shorewall will now load module files that are formed from the +module name by appending ".o.gz".
Migration Issues:
Shorewall IP Traffic Accounting has +changed since snapshot 20030813 -- see the Accounting Page for details.
+The Uset Set capability introduced +in SnapShot 20030821 has changed -- see the User Set page for details.
+The per-interface Dynamic Blacklisting facility introduced in +the first post-1.4.6 Snapshot has been removed. The facility had too +many idiosyncrasies for dial-up users to be a viable part of Shorewall.
New Features:
Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -4728,78 +5257,85 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG
+rules defined in /etc/shorewall/rules may now be rate-limited. For DNAT
+and REDIRECT rules, rate limiting occurs in the nat table DNAT rule;
+the corresponding ACCEPT rule in the filter table is not rate limited.
+If you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
- Warning: When rate
-limiting is specified on a rule with "all" in the SOURCE or DEST
-fields, the limit will apply to each pair of zones individually
-rather than as a single limit for all pairs of covered by the
-rule.
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
To specify a rate limit,
@@ -4810,22 +5346,20 @@ a) Follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
where
- <rate> is the sustained rate
-per <interval>
- <interval> is "sec" or
-"min"
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
<burst> is the largest burst
-accepted within an <interval>. If not given, the default of 5
-is assumed.
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
-There may be no white space between the ACTION and "<" nor there
-may be any white space within the burst specification. If you want
-to specify logging of a rate-limited rule, the ":" and log level
-comes after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
-b) A new RATE LIMIT column has been added to the
-/etc/shorewall/rules file. You may specify the rate limit there in
-the format:
+b) A new RATE LIMIT column has been added to the /etc/shorewall/rules
+file. You may specify the rate limit there in the format:
<rate>/<interval>[:<burst>]
@@ -4837,106 +5371,122 @@ ACCEPT<2/sec:4>
net dmz
tcp 80
-The first time this rule is reached, the packet will be accepted;
-in fact, since the burst is 4, the first four packets will be
-accepted. After this, it will be 500ms (1 second divided by the
-rate
-of 2) before a packet will be accepted from this rule, regardless
-of how many packets reach it. Also, every 500ms which passes
-without matching a packet, one of the bursts will be regained; if
-no packets hit the rule for 2 second, the burst will be fully
-recharged; back where we started.
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
Multiple chains may now be displayed +in one "shorewall show" command (e.g., shorewall show INPUT FORWARD +OUTPUT).
+Output rules (those with $FW as the SOURCE) may now be limited +to a set of local users and/or groups. See http://shorewall.net/UserSets.html +for details.
8/27/2003 - Shorewall Mirror in Australia
-Thanks to Dave Kempe and Solutions First (http://www.solutionsfirst.com.au), -there is now a -Shorewall Mirror in Australia:
- -8/26/2003 - French Version of the Shorewall Setup -Guide
-Thanks to Fabien Demassieux, there is now a French translation of the -Shorewall -Setup Guide. Merci Beacoup, Fabien! -8/25/2003 - Shorewall 1.4.7 Beta 1
-
Thanks to Dave Kempe and Solutions First +(http://www.solutionsfirst.com.au), +there is now a Shorewall Mirror in Australia:
+http://www.shorewall.com.au
+ftp://ftp.shorewall.com.au
8/26/2003 - French Version of the Shorewall Setup Guide
+Thanks to Fabien Demassieux, there is now a French +translation of the Shorewall Setup Guide. Merci Beacoup, Fabien!
+8/25/2003 - Shorewall 1.4.7 Beta 1
http://shorewall.net/pub/shorewall/Beta
-ftp://shorewall.net/pub/shorewall/Beta
-
Problems Corrected since version 1.4.6
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
-The firewall script has been modified to eliminate the error
-messages
Interface-specific dynamic +blacklisting chains are now displayed by "shorewall monitor" on the +"Dynamic Chains" page (previously named "Dynamic Chain").
+Thanks to Henry Yang, LOGRATE and LOGBURST now work again.
Migration Issues:
Shorewall IP Traffic Accounting has +changed since snapshot 20030813 -- see the Accounting Page for details.
+The Uset Set capability introduced +in SnapShot 20030821 has changed -- see the User Set page for details.
+The per-interface Dynamic Blacklisting facility introduced in +the first post-1.4.6 Snapshot has been removed. The facility had too +many idiosyncrasies for dial-up users to be a viable part of Shorewall.
New Features:
Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -4950,78 +5500,85 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG
+rules defined in /etc/shorewall/rules may now be rate-limited. For DNAT
+and REDIRECT rules, rate limiting occurs in the nat table DNAT rule;
+the corresponding ACCEPT rule in the filter table is not rate limited.
+If you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
- Warning: When rate
-limiting is specified on a rule with "all" in the SOURCE or DEST
-fields, the limit will apply to each pair of zones individually
-rather than as a single limit for all pairs of covered by the
-rule.
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
To specify a rate limit,
@@ -5032,22 +5589,20 @@ a) Follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
where
- <rate> is the sustained rate
-per <interval>
- <interval> is "sec" or
-"min"
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
<burst> is the largest burst
-accepted within an <interval>. If not given, the default of 5
-is assumed.
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
-There may be no white space between the ACTION and "<" nor there
-may be any white space within the burst specification. If you want
-to specify logging of a rate-limited rule, the ":" and log level
-comes after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
-b) A new RATE LIMIT column has been added to the
-/etc/shorewall/rules file. You may specify the rate limit there in
-the format:
+b) A new RATE LIMIT column has been added to the /etc/shorewall/rules
+file. You may specify the rate limit there in the format:
<rate>/<interval>[:<burst>]
@@ -5059,105 +5614,129 @@ ACCEPT<2/sec:4>
net dmz
tcp 80
-The first time this rule is reached, the packet will be accepted;
-in fact, since the burst is 4, the first four packets will be
-accepted. After this, it will be 500ms (1 second divided by the
-rate
-of 2) before a packet will be accepted from this rule, regardless
-of how many packets reach it. Also, every 500ms which passes
-without matching a packet, one of the bursts will be regained; if
-no packets hit the rule for 2 second, the burst will be fully
-recharged; back where we started.
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
Multiple chains may now be displayed +in one "shorewall show" command (e.g., shorewall show INPUT FORWARD +OUTPUT).
+Output rules (those with $FW as the SOURCE) may now be limited +to a set of local users and/or groups. See http://shorewall.net/UserSets.html +for details.
8/23/2003 - Snapshot 1.4.6_20030823
---Problems Corrected since version 1.4.6http://shorewall.net/pub/shorewall/Snapshots/
-
- ftp://shorewall.net/pub/shorewall/Snapshots/
8/23/2003 - Snapshot 1.4.6_20030823
+http://shorewall.net/pub/shorewall/Snapshots/+
+ ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
-The firewall script has been modified to eliminate the error
-messages
Interface-specific dynamic +blacklisting chains are now displayed by "shorewall monitor" on the +"Dynamic Chains" page (previously named "Dynamic Chain").
+Thanks to Henry Yang, LOGRATE and LOGBURST now work again.
Migration Issues:
Once you have installed this version +of Shorewall, you must restart Shorewall before you may use the 'drop', +'reject', 'allow' or 'save' commands.
+To maintain strict compatibility +with previous versions, current uses of "shorewall drop" and "shorewall +reject" should be replaced with "shorewall dropall" and "shorewall +rejectall"
+Shorewall IP Traffic Accounting has +changed since snapshot 20030813 -- see the Accounting Page for details.
+The Uset Set capability introduced in SnapShot 20030821 has +changed -- see the User Set page +for details.
+New Features:
Shorewall now creates a dynamic
+blacklisting chain for each interface defined in
+/etc/shorewall/interfaces. The 'drop' and 'reject' commands use the
+routing table to determine which of these chains is to be used for
+blacklisting the specified IP address(es).
-Two new commands ('dropall' and 'rejectall') have been introduced
-that do what 'drop' and 'reject' used to do; namely, when an
-address is blacklisted using these new commands, it will be
-blacklisted on all of your firewall's interfaces.
Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -5171,78 +5750,85 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG
+rules defined in /etc/shorewall/rules may now be rate-limited. For DNAT
+and REDIRECT rules, rate limiting occurs in the nat table DNAT rule;
+the corresponding ACCEPT rule in the filter table is not rate limited.
+If you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
- Warning: When rate
-limiting is specified on a rule with "all" in the SOURCE or DEST
-fields, the limit will apply to each pair of zones individually
-rather than as a single limit for all pairs of covered by the
-rule.
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
To specify a rate limit,
@@ -5253,22 +5839,20 @@ a) Follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
where
- <rate> is the sustained rate
-per <interval>
- <interval> is "sec" or
-"min"
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
<burst> is the largest burst
-accepted within an <interval>. If not given, the default of 5
-is assumed.
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
-There may be no white space between the ACTION and "<" nor there
-may be any white space within the burst specification. If you want
-to specify logging of a rate-limited rule, the ":" and log level
-comes after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
-b) A new RATE LIMIT column has been added to the
-/etc/shorewall/rules file. You may specify the rate limit there in
-the format:
+b) A new RATE LIMIT column has been added to the /etc/shorewall/rules
+file. You may specify the rate limit there in the format:
<rate>/<interval>[:<burst>]
@@ -5280,98 +5864,115 @@ ACCEPT<2/sec:4>
net dmz
tcp 80
-The first time this rule is reached, the packet will be accepted;
-in fact, since the burst is 4, the first four packets will be
-accepted. After this, it will be 500ms (1 second divided by the
-rate
-of 2) before a packet will be accepted from this rule, regardless
-of how many packets reach it. Also, every 500ms which passes
-without matching a packet, one of the bursts will be regained; if
-no packets hit the rule for 2 second, the burst will be fully
-recharged; back where we started.
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
Multiple chains may now be displayed +in one "shorewall show" command (e.g., shorewall show INPUT FORWARD +OUTPUT).
+Output rules (those with $FW as the SOURCE) may now be limited +to a set of local users and/or groups. See http://shorewall.net/UserSets.html +for details.
8/13/2003 - Snapshot 1.4.6_20030813 -
---Problems Corrected since version 1.4.6http://shorewall.net/pub/shorewall/Snapshots/
-
- ftp://shorewall.net/pub/shorewall/Snapshots/
8/13/2003 - Snapshot 1.4.6_20030813
+http://shorewall.net/pub/shorewall/Snapshots/+
+ ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6
+caused error messages during "shorewall [re]start" when
+ADD_IP_ALIASES=Yes and ip addresses were being added to a PPP
+interface; the addresses were successfully added in spite of the
+messages.
-The firewall script has been modified to eliminate the error
-messages
Interface-specific dynamic blacklisting chains are now
displayed by "shorewall monitor" on the "Dynamic Chains" page
-(previously named "Dynamic Chain").
-
+(previously named "Dynamic Chain").
Migration Issues:
Once you have installed this version +of Shorewall, you must restart Shorewall before you may use the 'drop', +'reject', 'allow' or 'save' commands.
+To maintain strict compatibility with previous versions, current +uses of "shorewall drop" and "shorewall reject" should be replaced with +"shorewall dropall" and "shorewall rejectall"
+New Features:
Shorewall now creates a dynamic
+blacklisting chain for each interface defined in
+/etc/shorewall/interfaces. The 'drop' and 'reject' commands use the
+routing table to determine which of these chains is to be used for
+blacklisting the specified IP address(es).
-Two new commands ('dropall' and 'rejectall') have been introduced
-that do what 'drop' and 'reject' used to do; namely, when an
-address is blacklisted using these new commands, it will be
-blacklisted on all of your firewall's interfaces.
Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -5385,99 +5986,104 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been +added to the /etc/shorewall/interfaces file. This option causes +/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the +result that this interface will only answer ARP 'who-has' requests from +hosts that are routed out through that interface. Setting this option +facilitates testing of your firewall where multiple firewall interfaces +are connected to the same HUB/Switch (all interfaces connected to the +single HUB/Switch should have this option specified). Note that using +such a configuration in a production environment is strongly +recommended against.
+The ADDRESS column in +/etc/shorewall/masq may now include a comma-separated list of addresses +and/or address ranges. Netfilter will use all listed addresses/ranges +in round-robin fashion. \
+An /etc/shorewall/accounting file +has been added to allow for traffic accounting. See the accounting documentation for a +description of this facility.
+Bridge interfaces (br[0-9]) may now +be used in /etc/shorewall/maclist.
+ACCEPT, DNAT[-], REDIRECT[-] and LOG rules defined in
/etc/shorewall/rules may now be rate-limited. For DNAT and REDIRECT
rules, rate limiting occurs in the nat table DNAT rule; the
-corresponding ACCEPT rule in the filter table is not rate limited.
-If you want to limit the filter table rule, you will need o create
-two rules; a DNAT- rule and an ACCEPT rule which can be
-rate-limited separately.
+corresponding ACCEPT rule in the filter table is not rate limited. If
+you want to limit the filter table rule, you will need o create two
+rules; a DNAT- rule and an ACCEPT rule which can be rate-limited
+separately.
- Warning: When rate
-limiting is specified on a rule with "all" in the SOURCE or DEST
-fields, the limit will apply to each pair of zones individually
-rather than as a single limit for all pairs of covered by the
-rule.
+ Warning: When rate limiting is specified on a rule with
+"all" in the SOURCE or DEST fields, the limit will apply to each pair
+of zones individually rather than as a single limit for all pairs of
+covered by the rule.
-To specify a rate limit, follow ACCEPT, DNAT[-], REDIRECT[-] or LOG
-with
+To specify a rate limit, follow ACCEPT, DNAT[-], REDIRECT[-] or LOG with
<
<rate>/<interval>[:<burst>] >
where
- <rate> is the sustained rate
-per <interval>
- <interval> is "sec" or
-"min"
+ <rate> is the sustained rate per
+<interval>
+ <interval> is "sec" or "min"
<burst> is the largest burst
-accepted within an <interval>. If not given, the default of 5
-is assumed.
+accepted within an <interval>. If not given, the default of 5 is
+assumed.
-There may be no white space between the ACTION and "<" nor there
-may be any white space within the burst specification. If you want
-to specify logging of a rate-limited rule, the ":" and log level
-comes after the ">" (e.g., ACCEPT<2/sec:4>:info ).
+There may be no white space between the ACTION and "<" nor there may
+be any white space within the burst specification. If you want to
+specify logging of a rate-limited rule, the ":" and log level comes
+after the ">" (e.g., ACCEPT<2/sec:4>:info ).
Let's take an example:
@@ -5486,87 +6092,98 @@ ACCEPT<2/sec:4>
net dmz
tcp 80
-The first time this rule is reached, the packet will be accepted;
-in fact, since the burst is 4, the first four packets will be
-accepted. After this, it will be 500ms (1 second divided by the
-rate
-of 2) before a packet will be accepted from this rule, regardless
-of how many packets reach it. Also, every 500ms which passes
-without matching a packet, one of the bursts will be regained; if
-no packets hit the rule for 2 second, the burst will be fully
-recharged; back where we started.
+The first time this rule is reached, the packet will be accepted; in
+fact, since the burst is 4, the first four packets will be accepted.
+After this, it will be 500ms (1 second divided by the rate
+of 2) before a packet will be accepted from this rule, regardless of
+how many packets reach it. Also, every 500ms which passes without
+matching a packet, one of the bursts will be regained; if no packets
+hit the rule for 2 second, the burst will be fully recharged; back
+where we started.
8/9/2003 - Snapshot 1.4.6_20030809 -
---Problems Corrected since version 1.4.6http://shorewall.net/pub/shorewall/Snapshots/
-
- ftp://shorewall.net/pub/shorewall/Snapshots/
8/9/2003 - Snapshot 1.4.6_20030809
+http://shorewall.net/pub/shorewall/Snapshots/+
+ ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6 caused error messages
+during "shorewall [re]start" when ADD_IP_ALIASES=Yes and ip addresses
+were being added to a PPP interface; the addresses were successfully
+added in spite of the messages.
-The firewall script has been modified to eliminate the error
-messages
+The firewall script has been modified to eliminate the error messages
Migration Issues:
Once you have installed this version +of Shorewall, you must restart Shorewall before you may use the 'drop', +'reject', 'allow' or 'save' commands.
+To maintain strict compatibility with previous versions, current +uses of "shorewall drop" and "shorewall reject" should be replaced with +"shorewall dropall" and "shorewall rejectall"
+New Features:
Shorewall now creates a dynamic
+blacklisting chain for each interface defined in
+/etc/shorewall/interfaces. The 'drop' and 'reject' commands use the
+routing table to determine which of these chains is to be used for
+blacklisting the specified IP address(es).
-Two new commands ('dropall' and 'rejectall') have been introduced
-that do what 'drop' and 'reject' used to do; namely, when an
-address is blacklisted using these new commands, it will be
-blacklisted on all of your firewall's interfaces.
Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED"
+has been added to /etc/shorewall/shorewall.conf. This option has a
+default value of "No" for existing users which causes Shorewall's
+'stopped' state to continue as it has been; namely, in the
+stopped state only traffic to/from hosts listed in
+/etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -5580,164 +6197,182 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
Given the wide range of VPN
+software, I can never hope to add specific support for all of it. I
+have therefore decided to add "generic" tunnel support.
-Generic tunnels work pretty much like any of the other tunnel
-types. You usually add a zone to represent the systems at the other
-end of the tunnel and you add the appropriate rules/policies to
-implement your security policy regarding traffic to/from those
-systems.
+Generic tunnels work pretty much like any of the other tunnel types.
+You usually add a zone to represent the systems at the other end of the
+tunnel and you add the appropriate rules/policies to
+implement your security policy regarding traffic to/from those systems.
-In the /etc/shorewall/tunnels file, you can have entries of the
-form:
+In the /etc/shorewall/tunnels file, you can have entries of the form:
-generic:<protocol>[:<port>] <zone>
-<ip address> <gateway zones>
+generic:<protocol>[:<port>] <zone> <ip
+address> <gateway zones>
where:
- <protocol> is the
-protocol used by the tunnel
- <port> if the
-protocol is 'udp' or 'tcp' then this is the destination port number
-used by the tunnel.
- <zone> is the zone
-of the remote tunnel gateway
+ <protocol> is the protocol
+used by the tunnel
+ <port> if the protocol
+is 'udp' or 'tcp' then this is the destination port number used by the
+tunnel.
+ <zone> is the zone of
+the remote tunnel gateway
<ip address> is the IP
address of the remote tunnel gateway.
- <gateway
-zone> Optional. A comma-separated list of zone
-names. If specified, the remote gateway is to be considered part of
-these zones.
An 'arp_filter' option has been added to the
/etc/shorewall/interfaces file. This option causes
-/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with
-the result that this interface will only answer ARP 'who-has'
-requests from hosts that are routed out through that interface.
-Setting this option facilitates testing of your firewall where
-multiple firewall interfaces are connected to the same HUB/Switch
-(all interfaces connected to the single HUB/Switch should have this
-option specified). Note that using such a configuration in a
-production environment is strongly recommended against.
+/proc/sys/net/ipv4/conf/<interface>/arp_filter to be set with the
+result that this interface will only answer ARP 'who-has' requests from
+hosts that are routed out through that interface. Setting this option
+facilitates testing of your firewall where multiple firewall interfaces
+are connected to the same HUB/Switch (all interfaces connected to the
+single HUB/Switch should have this option specified). Note that using
+such a configuration in a production environment is strongly
+recommended against.
8/5/2003 - Shorewall-1.4.6b
-
8/5/2003 - Shorewall-1.4.6b
+Problems Corrected since version 1.4.6:
Previously, if TC_ENABLED is set to +yes in shorewall.conf then Shorewall would fail to start with the error +"ERROR: Traffic Control requires Mangle"; that problem has been +corrected.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6 caused error messages
+during "shorewall [re]start" when ADD_IP_ALIASES=Yes and ip addresses
+were being added to a PPP interface; the addresses were successfully
+added in spite of the messages.
-The firewall script has been modified to eliminate the error
-messages.
8/5/2003 - Shorewall-1.4.6b
-
8/5/2003 - Shorewall-1.4.6b
+Problems Corrected since version 1.4.6:
Previously, if TC_ENABLED is set to +yes in shorewall.conf then Shorewall would fail to start with the error +"ERROR: Traffic Control requires Mangle"; that problem has been +corrected.
+Corrected handling of MAC addresses +in the SOURCE column of the tcrules file. Previously, these addresses +resulted in an invalid iptables command.
+The "shorewall stop" command is now +disabled when /etc/shorewall/startup_disabled exists. This prevents +people from shooting themselves in the foot prior to having configured +Shorewall.
+A change introduced in version 1.4.6 caused error messages
+during "shorewall [re]start" when ADD_IP_ALIASES=Yes and ip addresses
+were being added to a PPP interface; the addresses were successfully
+added in spite of the messages.
-The firewall script has been modified to eliminate the error
-messages.
+The firewall script has been modified to eliminate the error messages.
7/31/2003 - Snapshot 1.4.6_20030731
---http://shorewall.net/pub/shorewall/Snapshots/
-
- ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6:
-
7/31/2003 - Snapshot 1.4.6_20030731
+http://shorewall.net/pub/shorewall/Snapshots/+
+ ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6:
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses in the SOURCE column of the
tcrules file. Previously, these addresses resulted in an invalid
-iptables command.
+iptables command.
Migration Issues:
-
Migration Issues:
Once you have installed this version +of Shorewall, you must restart Shorewall before you may use the 'drop', +'reject', 'allow' or 'save' commands.
+To maintain strict compatibility with previous versions, current +uses of "shorewall drop" and "shorewall reject" should be replaced with +"shorewall dropall" and "shorewall rejectall"
+New Features:
-
New Features:
Shorewall now creates a dynamic
+blacklisting chain for each interface defined in
+/etc/shorewall/interfaces. The 'drop' and 'reject' commands use the
+routing table to determine which of these chains is to be used for
+blacklisting the specified IP address(es).
-Two new commands ('dropall' and 'rejectall') have been introduced
-that do what 'drop' and 'reject' used to do; namely, when an
-address is blacklisted using these new commands, it will be
-blacklisted on all of your firewall's interfaces.
Thanks to Steve Herber, the 'help' +command can now give command-specific help (e.g., shorewall help +<command>).
+A new option "ADMINISABSENTMINDED" has been added to
+/etc/shorewall/shorewall.conf. This option has a default value of "No"
+for existing users which causes Shorewall's 'stopped' state to
+continue as it has been; namely, in the stopped state only traffic
+to/from hosts listed in /etc/shorewall/routestopped is accepted.
With ADMINISABSENTMINDED=Yes (the default for new installs), in
addition to traffic to/from the hosts listed in
/etc/shorewall/routestopped, Shorewall will allow:
- a) All traffic originating from the firewall itself;
-and
+ a) All traffic originating from the firewall itself; and
b) All traffic that is part of or related to an
already-existing connection.
- In particular, with ADMINISABSENTMINDED=Yes, a "shorewall
-stop" entered through an ssh session will not kill the session.
+ In particular, with ADMINISABSENTMINDED=Yes, a "shorewall stop"
+entered through an ssh session will not kill the session.
- Note though that even with ADMINISABSENTMINDED=Yes, it is
-still possible for people to shoot themselves in the foot.
+ Note though that even with ADMINISABSENTMINDED=Yes, it is still
+possible for people to shoot themselves in the foot.
Example:
@@ -5751,286 +6386,281 @@ eth0:0 192.168.1.5
ACCEPT net
loc:192.168.1.5 tcp 22
ACCEPT loc
-fw tcp
-22
+fw tcp 22
-From a remote system, I ssh to 206.124.146.178 which establishes an
-SSH connection with local system 192.168.1.5. I then create a
-second SSH connection from that computer to the firewall and
-confidently type "shorewall stop". As part of its stop processing,
-Shorewall removes eth0:0 which kills my SSH connection to
-192.168.1.5!!!
7/27/2003 - Snapshot 1.4.6_20030727
---Problems Corrected since version 1.4.6http://shorewall.net/pub/shorewall/Snapshots/
-
- ftp://shorewall.net/pub/shorewall/Snapshots/
7/27/2003 - Snapshot 1.4.6_20030727
+http://shorewall.net/pub/shorewall/Snapshots/+
+ ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses in the SOURCE column of the +tcrules file. Previously, these addresses resulted in an invalid +iptables command.
+Migration Issues:
Once you have installed this version +of Shorewall, you must restart Shorewall before you may use the 'drop', +'reject', 'allow' or 'save' commands.
+To maintain strict compatibility with previous versions, current +uses of "shorewall drop" and "shorewall reject" should be replaced with +"shorewall dropall" and "shorewall rejectall"
+New Features:
+Shorewall now creates a dynamic
+blacklisting chain for each interface defined in
+/etc/shorewall/interfaces. The 'drop' and 'reject' commands use the
+routing table to determine which of these chains is to be used for
+blacklisting the specified IP address(es).
-Two new commands ('dropall' and 'rejectall') have been introduced
-that do what 'drop' and 'reject' used to do; namely, when an
-address is blacklisted using these new commands, it will be
-blacklisted on all of your firewall's interfaces.
Thanks to Steve Herber, the 'help' command can now give +command-specific help (e.g., shorewall help <command>).
7/26/2003 - Snapshot 1.4.6_20030726
---http://shorewall.net/pub/shorewall/Snapshots/
-
- ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6:
-
http://shorewall.net/pub/shorewall/Snapshots/+
+ ftp://shorewall.net/pub/shorewall/Snapshots/
Problems Corrected since version 1.4.6:
Corrected problem in 1.4.6 where the +MANGLE_ENABLED variable was being tested before it was set.
+Corrected handling of MAC addresses in the SOURCE column of the
tcrules file. Previously, these addresses resulted in an invalid
-iptables command.
+iptables command.
Migration Issues:
-
Migration Issues:
Once you have installed this version +of Shorewall, you must restart Shorewall before you may use the 'drop', +'reject', 'allow' or 'save' commands.
+To maintain strict compatibility with previous versions, current +uses of "shorewall drop" and "shorewall reject" should be replaced with +"shorewall dropall" and "shorewall rejectall"
+New Features:
-
New Features:
+Shorewall now creates a dynamic blacklisting chain for each
interface defined in /etc/shorewall/interfaces. The 'drop' and
'reject' commands use the routing table to determine which of these
chains is to be used for blacklisting the specified IP
address(es).
-Two new commands ('dropall' and 'rejectall') have been introduced
-that do what 'drop' and 'reject' used to do; namely, when an
-address is blacklisted using these new commands, it will be
-blacklisted on all of your firewall's interfaces.
-
7/22/2003 - Shorewall-1.4.6a
-
7/22/2003 - Shorewall-1.4.6a
+Problems Corrected:
Previously, if TC_ENABLED is set to yes in shorewall.conf then Shorewall would fail to start with the error "ERROR: Traffic -Control requires Mangle"; that problem has been corrected.
7/20/2003 - Shorewall-1.4.6
-
Problems Corrected:
-
7/20/2003 - Shorewall-1.4.6
+Problems Corrected:
A problem seen on RH7.3 systems where Shorewall encountered +start errors when started using the "service" mechanism has been worked +around.
Where a list of IP addresses appears in the DEST column of a +DNAT[-] rule, Shorewall incorrectly created multiple DNAT rules in the +nat table (one for each element in the list). Shorewall now correctly +creates a single DNAT rule with multiple "--to-destination" clauses.
Corrected a problem in Beta 1 where DNS names containing a "-" +were mis-handled when they appeared in the DEST column of a rule.
A number of problems with rule parsing have been corrected.
Corrections involve the handling of "z1!z2" in the SOURCE column as
-well as lists in the ORIGINAL DESTINATION column.
-
+well as lists in the ORIGINAL DESTINATION column.
The message "Adding rules for DHCP" is now suppressed if there +are no DHCP rules to add.
Migration Issues:
-
Migration Issues:
In earlier versions, an undocumented feature allowed entries in
the host file as follows:
z
eth1:192.168.1.0/24,eth2:192.168.2.0/24
-This capability was never documented and has been removed in 1.4.6
-to allow entries of the following format:
-
- z eth1:192.168.1.0/24,192.168.2.0/24
+This capability was never documented and has been removed in 1.4.6 to
+allow entries of the following format:
+ z eth1:192.168.1.0/24,192.168.2.0/24
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT options have been +removed from /etc/shorewall/shorewall.conf. These capabilities are now +automatically detected by Shorewall (see below).
New Features:
-
New Features:
A 'newnotsyn' interface option has been added. This option may
be specified in /etc/shorewall/interfaces and overrides the setting
-NEWNOTSYN=No for packets arriving on the associated interface.
-
+NEWNOTSYN=No for packets arriving on the associated interface.
The means for specifying a range of IP addresses in
/etc/shorewall/masq to use for SNAT is now documented.
-ADD_SNAT_ALIASES=Yes is enabled for address ranges.
-
+ADD_SNAT_ALIASES=Yes is enabled for address ranges.
Shorewall can now add IP addresses to subnets other than the +first one on an interface.
DNAT[-] rules may now be used to load balance (round-robin) over
+a set of servers. Servers may be specified in a range of addresses
+given as <first address>-<last address>.
Example:
- DNAT net loc:192.168.10.2-192.168.10.5 tcp 80
-
+ DNAT net loc:192.168.10.2-192.168.10.5 tcp 80
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT configuration
+options have been removed and have been replaced by code that detects
+whether these capabilities are present in the current kernel. The
+output of the start, restart and check commands have been enhanced to
+report the outcome:
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
-Verifying Configuration...
-
+Verifying Configuration...
Support for the Connection Tracking
+Match Extension has been added. This extension is available in recent
+kernel/iptables releases and allows for rules which match against
+elements in netfilter's connection tracking table. Shorewall
+automatically detects the availability of this extension and reports
+its availability in the output of the start, restart and check commands.
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Connection Tracking Match: Available
Verifying Configuration...
-If this extension is available, the ruleset generated by Shorewall
-is changed in the following ways:
To handle 'norfc1918' filtering, +Shorewall will not create chains in the mangle table but will rather do +all 'norfc1918' filtering in the filter table (rfc1918 chain).
+Recall that Shorewall DNAT rules generate two netfilter +rules; one in the nat table and one in the filter table. If the +Connection Tracking Match Extension is available, the rule in the +filter table is extended to check that the original destination address +was the same as specified (or defaulted to) in the DNAT rule.
The shell used to interpret the firewall script
(/usr/share/shorewall/firewall) may now be specified using the
-SHOREWALL_SHELL parameter in shorewall.conf.
-
+SHOREWALL_SHELL parameter in shorewall.conf.
An 'ipcalc' command has been added to /sbin/shorewall.
- ipcalc [ <address>
-<netmask> | <address>/<vlsm> ]
+ ipcalc [ <address> <netmask>
+| <address>/<vlsm> ]
Examples:
[root@wookie root]# shorewall ipcalc
192.168.1.0/24
-
-CIDR=192.168.1.0/24
-
-NETMASK=255.255.255.0
-
-NETWORK=192.168.1.0
-
-BROADCAST=192.168.1.255
+ CIDR=192.168.1.0/24
+ NETMASK=255.255.255.0
+ NETWORK=192.168.1.0
+ BROADCAST=192.168.1.255
[root@wookie root]#
[root@wookie root]# shorewall ipcalc
192.168.1.0 255.255.255.0
-
-CIDR=192.168.1.0/24
-
-NETMASK=255.255.255.0
-
-NETWORK=192.168.1.0
-
-BROADCAST=192.168.1.255
+ CIDR=192.168.1.0/24
+ NETMASK=255.255.255.0
+ NETWORK=192.168.1.0
+ BROADCAST=192.168.1.255
[root@wookie root]#
Warning:
If your shell only supports 32-bit signed arithmatic (ash or dash),
-then the ipcalc command produces incorrect information for IP
-addresses 128.0.0.0-1 and for /1 networks. Bash should produce
-correct information for all valid IP addresses.
-
+then the ipcalc command produces incorrect information for IP addresses
+128.0.0.0-1 and for /1 networks. Bash should produce correct
+information for all valid IP addresses.
An 'iprange' command has been added to /sbin/shorewall.
- iprange
-<address>-<address>
+ iprange <address>-<address>
-This command decomposes a range of IP addressses into a list of
-network and host addresses. The command can be useful if you need
-to construct an efficient set of rules that accept connections from
-a range of network addresses.
+This command decomposes a range of IP addressses into a list of network
+and host addresses. The command can be useful if you need to construct
+an efficient set of rules that accept connections from a range of
+network addresses.
Note: If your shell only supports 32-bit signed arithmetic (ash or
dash) then the range may not span 128.0.0.0.
Example:
- [root@gateway root]# shorewall
-iprange 192.168.1.4-192.168.12.9
+ [root@gateway root]# shorewall iprange
+192.168.1.4-192.168.12.9
192.168.1.4/30
192.168.1.8/29
192.168.1.16/28
@@ -6042,19 +6672,19 @@ iprange 192.168.1.4-192.168.12.9
192.168.8.0/22
192.168.12.0/29
192.168.12.8/31
- [root@gateway root]#
-
+ [root@gateway root]#
A list of host/net addresses is now allowed in an entry in
/etc/shorewall/hosts.
Example:
foo
-eth1:192.168.1.0/24,192.168.2.0/24
-
+eth1:192.168.1.0/24,192.168.2.0/24
The "shorewall check" command now includes the chain name when
printing the applicable policy for each pair of zones.
Example:
@@ -6062,201 +6692,185 @@ printing the applicable policy for each pair of zones.
Policy for dmz to net is
REJECT using chain all2all
-This means that the policy for connections from the dmz to the
-internet is REJECT and the applicable entry in the
-/etc/shorewall/policy was the all->all policy.
-
+This means that the policy for connections from the dmz to the internet
+is REJECT and the applicable entry in the /etc/shorewall/policy was the
+all->all policy.
Support for the 2.6 Kernel series has been added.
7/15/2003 - New Mirror in Brazil
-
7/15/2003 - Shorewall-1.4.6 RC 1
-
Problems Corrected:
-
7/15/2003 - New Mirror in Brazil
+Thanks to the folks at securityopensource.org.br, there is now a +Shorewall +mirror in Brazil.
+7/15/2003 - Shorewall-1.4.6 RC 1
+Problems Corrected:
A problem seen on RH7.3 systems where Shorewall encountered +start errors when started using the "service" mechanism has been worked +around.
Where a list of IP addresses appears in the DEST column of a +DNAT[-] rule, Shorewall incorrectly created multiple DNAT rules in the +nat table (one for each element in the list). Shorewall now correctly +creates a single DNAT rule with multiple "--to-destination" clauses.
Corrected a problem in Beta 1 where DNS names containing a "-" +were mis-handled when they appeared in the DEST column of a rule.
A number of problems with rule parsing have been corrected.
Corrections involve the handling of "z1!z2" in the SOURCE column as
-well as lists in the ORIGINAL DESTINATION column.
+well as lists in the ORIGINAL DESTINATION column.
Migration Issues:
-
Migration Issues:
In earlier versions, an undocumented feature allowed entries in
the host file as follows:
z
eth1:192.168.1.0/24,eth2:192.168.2.0/24
-This capability was never documented and has been removed in 1.4.6
-to allow entries of the following format:
-
- z eth1:192.168.1.0/24,192.168.2.0/24
+This capability was never documented and has been removed in 1.4.6 to
+allow entries of the following format:
+ z eth1:192.168.1.0/24,192.168.2.0/24
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT options have been +removed from /etc/shorewall/shorewall.conf. These capabilities are now +automatically detected by Shorewall (see below).
New Features:
-
New Features:
A 'newnotsyn' interface option has been added. This option may
be specified in /etc/shorewall/interfaces and overrides the setting
-NEWNOTSYN=No for packets arriving on the associated interface.
-
+NEWNOTSYN=No for packets arriving on the associated interface.
The means for specifying a range of IP addresses in
/etc/shorewall/masq to use for SNAT is now documented.
-ADD_SNAT_ALIASES=Yes is enabled for address ranges.
-
+ADD_SNAT_ALIASES=Yes is enabled for address ranges.
Shorewall can now add IP addresses to subnets other than the +first one on an interface.
DNAT[-] rules may now be used to load balance (round-robin) over
+a set of servers. Servers may be specified in a range of addresses
+given as <first address>-<last address>.
Example:
- DNAT net loc:192.168.10.2-192.168.10.5 tcp 80
-
+ DNAT net loc:192.168.10.2-192.168.10.5 tcp 80
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT configuration
+options have been removed and have been replaced by code that detects
+whether these capabilities are present in the current kernel. The
+output of the start, restart and check commands have been enhanced to
+report the outcome:
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
-Verifying Configuration...
-
+Verifying Configuration...
Support for the Connection Tracking
+Match Extension has been added. This extension is available in recent
+kernel/iptables releases and allows for rules which match against
+elements in netfilter's connection tracking table. Shorewall
+automatically detects the availability of this extension and reports
+its availability in the output of the start, restart and check commands.
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Connection Tracking Match: Available
Verifying Configuration...
-If this extension is available, the ruleset generated by Shorewall
-is changed in the following ways:
To handle 'norfc1918' filtering, +Shorewall will not create chains in the mangle table but will rather do +all 'norfc1918' filtering in the filter table (rfc1918 chain).
+Recall that Shorewall DNAT rules generate two netfilter +rules; one in the nat table and one in the filter table. If the +Connection Tracking Match Extension is available, the rule in the +filter table is extended to check that the original destination address +was the same as specified (or defaulted to) in the DNAT rule.
The shell used to interpret the firewall script
(/usr/share/shorewall/firewall) may now be specified using the
-SHOREWALL_SHELL parameter in shorewall.conf.
-
+SHOREWALL_SHELL parameter in shorewall.conf.
An 'ipcalc' command has been added to /sbin/shorewall.
- ipcalc [ <address>
-<netmask> | <address>/<vlsm> ]
+ ipcalc [ <address> <netmask>
+| <address>/<vlsm> ]
Examples:
[root@wookie root]# shorewall ipcalc
192.168.1.0/24
-
-CIDR=192.168.1.0/24
-
-NETMASK=255.255.255.0
-
-NETWORK=192.168.1.0
-
-BROADCAST=192.168.1.255
+ CIDR=192.168.1.0/24
+ NETMASK=255.255.255.0
+ NETWORK=192.168.1.0
+ BROADCAST=192.168.1.255
[root@wookie root]#
[root@wookie root]# shorewall ipcalc
192.168.1.0 255.255.255.0
-
-CIDR=192.168.1.0/24
-
-NETMASK=255.255.255.0
-
-NETWORK=192.168.1.0
-
-BROADCAST=192.168.1.255
+ CIDR=192.168.1.0/24
+ NETMASK=255.255.255.0
+ NETWORK=192.168.1.0
+ BROADCAST=192.168.1.255
[root@wookie root]#
Warning:
If your shell only supports 32-bit signed arithmatic (ash or dash),
-then the ipcalc command produces incorrect information for IP
-addresses 128.0.0.0-1 and for /1 networks. Bash should produce
-correct information for all valid IP addresses.
-
+then the ipcalc command produces incorrect information for IP addresses
+128.0.0.0-1 and for /1 networks. Bash should produce correct
+information for all valid IP addresses.
An 'iprange' command has been added to /sbin/shorewall.
- iprange
-<address>-<address>
+ iprange <address>-<address>
-This command decomposes a range of IP addressses into a list of
-network and host addresses. The command can be useful if you need
-to construct an efficient set of rules that accept connections from
-a range of network addresses.
+This command decomposes a range of IP addressses into a list of network
+and host addresses. The command can be useful if you need to construct
+an efficient set of rules that accept connections from a range of
+network addresses.
Note: If your shell only supports 32-bit signed arithmetic (ash or
dash) then the range may not span 128.0.0.0.
Example:
- [root@gateway root]# shorewall
-iprange 192.168.1.4-192.168.12.9
+ [root@gateway root]# shorewall iprange
+192.168.1.4-192.168.12.9
192.168.1.4/30
192.168.1.8/29
192.168.1.16/28
@@ -6268,193 +6882,180 @@ iprange 192.168.1.4-192.168.12.9
192.168.8.0/22
192.168.12.0/29
192.168.12.8/31
- [root@gateway root]#
-
+ [root@gateway root]#
A list of host/net addresses is now allowed in an entry in
/etc/shorewall/hosts.
Example:
foo
-eth1:192.168.1.0/24,192.168.2.0/24
7/7/2003 - Shorewall-1.4.6 Beta 2
-Problems Corrected:
-
Problems Corrected:
A problem seen on RH7.3 systems where Shorewall encountered +start errors when started using the "service" mechanism has been worked +around.
Where a list of IP addresses appears in the DEST column of a +DNAT[-] rule, Shorewall incorrectly created multiple DNAT rules in the +nat table (one for each element in the list). Shorewall now correctly +creates a single DNAT rule with multiple "--to-destination" clauses.
Corrected a problem in Beta 1 where DNS names containing a "-" +were mis-handled when they appeared in the DEST column of a rule.
Migration Issues:
-
Migration Issues:
In earlier versions, an undocumented feature allowed entries in
the host file as follows:
z
eth1:192.168.1.0/24,eth2:192.168.2.0/24
-This capability was never documented and has been removed in 1.4.6
-to allow entries of the following format:
-
- z eth1:192.168.1.0/24,192.168.2.0/24
+This capability was never documented and has been removed in 1.4.6 to
+allow entries of the following format:
+ z eth1:192.168.1.0/24,192.168.2.0/24
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT options have been +removed from /etc/shorewall/shorewall.conf. These capabilities are now +automatically detected by Shorewall (see below).
New Features:
-
New Features:
A 'newnotsyn' interface option has been added. This option may
be specified in /etc/shorewall/interfaces and overrides the setting
-NEWNOTSYN=No for packets arriving on the associated interface.
-
+NEWNOTSYN=No for packets arriving on the associated interface.
The means for specifying a range of IP addresses in
/etc/shorewall/masq to use for SNAT is now documented.
-ADD_SNAT_ALIASES=Yes is enabled for address ranges.
-
+ADD_SNAT_ALIASES=Yes is enabled for address ranges.
Shorewall can now add IP addresses to subnets other than the +first one on an interface.
DNAT[-] rules may now be used to load balance (round-robin) over
+a set of servers. Servers may be specified in a range of addresses
+given as <first address>-<last address>.
Example:
- DNAT net loc:192.168.10.2-192.168.10.5 tcp 80
-
+ DNAT net loc:192.168.10.2-192.168.10.5 tcp 80
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT configuration
+options have been removed and have been replaced by code that detects
+whether these capabilities are present in the current kernel. The
+output of the start, restart and check commands have been enhanced to
+report the outcome:
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
-Verifying Configuration...
-
+Verifying Configuration...
Support for the Connection Tracking
+Match Extension has been added. This extension is available in recent
+kernel/iptables releases and allows for rules which match against
+elements in netfilter's connection tracking table. Shorewall
+automatically detects the availability of this extension and reports
+its availability in the output of the start, restart and check commands.
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Connection Tracking Match: Available
Verifying Configuration...
-If this extension is available, the ruleset generated by Shorewall
-is changed in the following ways:
To handle 'norfc1918' filtering, +Shorewall will not create chains in the mangle table but will rather do +all 'norfc1918' filtering in the filter table (rfc1918 chain).
+Recall that Shorewall DNAT rules generate two netfilter +rules; one in the nat table and one in the filter table. If the +Connection Tracking Match Extension is available, the rule in the +filter table is extended to check that the original destination address +was the same as specified (or defaulted to) in the DNAT rule.
The shell used to interpret the firewall script
(/usr/share/shorewall/firewall) may now be specified using the
-SHOREWALL_SHELL parameter in shorewall.conf.
-
+SHOREWALL_SHELL parameter in shorewall.conf.
An 'ipcalc' command has been added to /sbin/shorewall.
- ipcalc [ <address>
-<netmask> | <address>/<vlsm> ]
+ ipcalc [ <address> <netmask>
+| <address>/<vlsm> ]
Examples:
[root@wookie root]# shorewall ipcalc
192.168.1.0/24
-
-CIDR=192.168.1.0/24
-
-NETMASK=255.255.255.0
-
-NETWORK=192.168.1.0
-
-BROADCAST=192.168.1.255
+ CIDR=192.168.1.0/24
+ NETMASK=255.255.255.0
+ NETWORK=192.168.1.0
+ BROADCAST=192.168.1.255
[root@wookie root]#
[root@wookie root]# shorewall ipcalc
192.168.1.0 255.255.255.0
-
-CIDR=192.168.1.0/24
-
-NETMASK=255.255.255.0
-
-NETWORK=192.168.1.0
-
-BROADCAST=192.168.1.255
+ CIDR=192.168.1.0/24
+ NETMASK=255.255.255.0
+ NETWORK=192.168.1.0
+ BROADCAST=192.168.1.255
[root@wookie root]#
Warning:
If your shell only supports 32-bit signed arithmatic (ash or dash),
-then the ipcalc command produces incorrect information for IP
-addresses 128.0.0.0-1 and for /1 networks. Bash should produce
-correct information for all valid IP addresses.
-
+then the ipcalc command produces incorrect information for IP addresses
+128.0.0.0-1 and for /1 networks. Bash should produce correct
+information for all valid IP addresses.
An 'iprange' command has been added to /sbin/shorewall.
- iprange
-<address>-<address>
+ iprange <address>-<address>
-This command decomposes a range of IP addressses into a list of
-network and host addresses. The command can be useful if you need
-to construct an efficient set of rules that accept connections from
-a range of network addresses.
+This command decomposes a range of IP addressses into a list of network
+and host addresses. The command can be useful if you need to construct
+an efficient set of rules that accept connections from a range of
+network addresses.
Note: If your shell only supports 32-bit signed arithmetic (ash or
dash) then the range may not span 128.0.0.0.
Example:
- [root@gateway root]# shorewall
-iprange 192.168.1.4-192.168.12.9
+ [root@gateway root]# shorewall iprange
+192.168.1.4-192.168.12.9
192.168.1.4/30
192.168.1.8/29
192.168.1.16/28
@@ -6466,56 +7067,53 @@ iprange 192.168.1.4-192.168.12.9
192.168.8.0/22
192.168.12.0/29
192.168.12.8/31
- [root@gateway root]#
-
+ [root@gateway root]#
A list of host/net addresses is now allowed in an entry in
/etc/shorewall/hosts.
Example:
foo
-eth1:192.168.1.0/24,192.168.2.0/24
-
+eth1:192.168.1.0/24,192.168.2.0/24
7/4/2003 - Shorewall-1.4.6 Beta 1
-Problems Corrected:
-
Problems Corrected:
A problem seen on RH7.3 systems where Shorewall encountered +start errors when started using the "service" mechanism has been worked +around.
Where a list of IP addresses appears in the DEST column of a +DNAT[-] rule, Shorewall incorrectly created multiple DNAT rules in the +nat table (one for each element in the list). Shorewall now correctly +creates a single DNAT rule with multiple "--to-destination" clauses.
New Features:
-
New Features:
A 'newnotsyn' interface option has been added. This option may
be specified in /etc/shorewall/interfaces and overrides the setting
-NEWNOTSYN=No for packets arriving on the associated interface.
-
+NEWNOTSYN=No for packets arriving on the associated interface.
The means for specifying a range of IP addresses in
/etc/shorewall/masq to use for SNAT is now documented.
-ADD_SNAT_ALIASES=Yes is enabled for address ranges.
-
+ADD_SNAT_ALIASES=Yes is enabled for address ranges.
Shorewall can now add IP addresses to subnets other than the +first one on an interface.
DNAT[-] rules may now be used to load balance (round-robin) over
+a set of servers. Up to 256 servers may be specified in a range of
+addresses given as <first address>-<last address>.
Example:
@@ -6523,159 +7121,155 @@ Example:
Note that this capability has previously been available using a
combination of a DNAT- rule and one or more ACCEPT rules. That
-technique is still preferable for load-balancing over a large
-number of servers (> 16) since specifying a range in the DNAT
-rule causes one filter table ACCEPT rule to be generated for each
-IP address in the range.
-
+technique is still preferable for load-balancing over a large number of
+servers (> 16) since specifying a range in the DNAT rule causes one
+filter table ACCEPT rule to be generated for each IP address in the
+range.
The NAT_ENABLED, MANGLE_ENABLED and MULTIPORT configuration
+options have been removed and have been replaced by code that detects
+whether these capabilities are present in the current kernel. The
+output of the start, restart and check commands have been enhanced to
+report the outcome:
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
-Verifying Configuration...
-
+Verifying Configuration...
Support for the Connection Tracking
+Match Extension has been added. This extension is available in recent
+kernel/iptables releases and allows for rules which match against
+elements in netfilter's connection tracking table. Shorewall
+automatically detects the availability of this extension and reports
+its availability in the output of the start, restart and check commands.
-Shorewall has detected the following iptables/netfilter
-capabilities:
+Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Connection Tracking Match: Available
Verifying Configuration...
-If this extension is available, the ruleset generated by Shorewall
-is changed in the following ways:
To handle 'norfc1918' filtering, +Shorewall will not create chains in the mangle table but will rather do +all 'norfc1918' filtering in the filter table (rfc1918 chain).
+Recall that Shorewall DNAT rules generate two netfilter +rules; one in the nat table and one in the filter table. If the +Connection Tracking Match Extension is available, the rule in the +filter table is extended to check that the original destination address +was the same as specified (or defaulted to) in the DNAT rule.
The shell used to interpret the firewall script
(/usr/share/shorewall/firewall) may now be specified using the
-SHOREWALL_SHELL parameter in shorewall.conf.
+SHOREWALL_SHELL parameter in shorewall.conf.
6/17/2003 - Shorewall-1.4.5
-Problems Corrected:
-
Problems Corrected:
The command "shorewall debug try +<directory>" now correctly traces the attempt.
+The INCLUDE directive now works +properly in the zones file; previously, INCLUDE in that file was +ignored.
+/etc/shorewall/routestopped records with an empty second column +are no longer ignored.
New Features:
-
New Features:
The ORIGINAL DEST column in a DNAT[-] or REDIRECT[-] rule may +now contain a list of addresses. If the list begins with "!' then the +rule will take effect only if the original destination address in the +connection request does not match any of the addresses listed.
+6/15/2003 - Shorewall, Kernel 2.4.21 and iptables -1.2.8
+6/15/2003 - Shorewall, Kernel 2.4.21 and iptables 1.2.8
The firewall at shorewall.net has been upgraded to the 2.4.21
kernel and iptables 1.2.8 (using the "official" RPM from
netfilter.org). No problems have been encountered with this set of
software. The Shorewall version is 1.4.4b plus the accumulated
-changes for 1.4.5.
-
6/8/2003 - Updated Samples
Thanks to Francesca Smith, the samples have been updated to Shorewall version 1.4.4.
5/29/2003 - Shorewall-1.4.4b
Groan -- This version corrects a problem whereby the --log-level
-was not being set when logging via syslog. The most commonly
-reported symptom was that Shorewall messages were being written to
-the console even though console logging was correctly configured
-per FAQ 16.
-
5/27/2003 - Shorewall-1.4.4a
-The Fireparse --log-prefix fiasco continues. Tuomo Soini has -pointed out that the code in 1.4.4 restricts the length of short -zone names to 4 characters. I've produced version 1.4.4a that -restores the previous 5-character limit by conditionally omitting -the log rule number when the LOGFORMAT doesn't contain '%d'.The Fireparse --log-prefix fiasco continues. Tuomo Soini has +pointed out that the code in 1.4.4 restricts the length of short zone +names to 4 characters. I've produced version 1.4.4a that restores the +previous 5-character limit by conditionally omitting the log rule +number when the LOGFORMAT doesn't contain '%d'.
5/23/2003 - Shorewall-1.4.4
-I apologize for the rapid-fire releases but since there is a -potential configuration change required to go from 1.4.3a to 1.4.4, -I decided to make it a full release rather than just a bug-fix -release.I apologize for the rapid-fire releases but since there is a
+potential configuration change required to go from 1.4.3a to 1.4.4, I
+decided to make it a full release rather than just a bug-fix release.
- Problems corrected:
-
None.- New Features:
-
None.+
New Features:
A REDIRECT- rule target has been added. This target behaves for +REDIRECT in the same way as DNAT- does for DNAT in that the Netfilter +nat table REDIRECT rule is added but not the companion filter table +ACCEPT rule.
The LOGMARKER variable has been renamed LOGFORMAT and has been
+changed to a 'printf' formatting template which accepts three arguments
+(the chain name, logging rule number and the disposition). To use
+LOGFORMAT with fireparse (http://www.fireparse.com),
+set it as:
LOGFORMAT="fp=%s:%d a=%s "
CAUTION: /sbin/shorewall uses the leading part of the
-LOGFORMAT string (up to but not including the first '%') to find
-log messages in the 'show log', 'status' and 'hits' commands. This
-part should not be omitted (the LOGFORMAT should not begin with
-"%") and the leading part should be sufficiently unique for
-/sbin/shorewall to identify Shorewall messages.
-
+LOGFORMAT string (up to but not including the first '%') to find log
+messages in the 'show log', 'status' and 'hits' commands. This part
+should not be omitted (the LOGFORMAT should not begin with "%") and the
+leading part should be sufficiently unique for /sbin/shorewall to
+identify Shorewall messages.
When logging is specified on a DNAT[-] or REDIRECT[-] rule, the
logging now takes place in the nat table rather than in the filter
-table. This way, only those connections that actually undergo DNAT
-or redirection will be logged.
+table. This way, only those connections that actually undergo DNAT or
+redirection will be logged.
5/20/2003 - Shorewall-1.4.3a
-
5/20/2003 - Shorewall-1.4.3a
+This version primarily corrects the documentation included in the +.tgz and in the .rpm. In addition:
(This change is in 1.4.3 but is not
+documented) If you are running iptables 1.2.7a and kernel 2.4.20, then
+Shorewall will return reject replies as follows:
a) tcp - RST
b) udp - ICMP port unreachable
c) icmp - ICMP host unreachable
@@ -6683,76 +7277,79 @@ return reject replies as follows:
If you are running earlier software, Shorewall will follow it's
traditional convention:
a) tcp - RST
- b) Otherwise - ICMP port unreachable
UDP port 135 is now silently dropped in the common.def chain.
Remember that this chain is traversed just before a DROP or REJECT
-policy is enforced.
+policy is enforced.
5/18/2003 - Shorewall 1.4.3
-
5/18/2003 - Shorewall 1.4.3
+Problems Corrected:
There were several cases where +Shorewall would fail to remove a temporary directory from /tmp. These +cases have been corrected.
+The rules for allowing all traffic via the loopback interface +have been moved to before the rule that drops status=INVALID packets. +This insures that all loopback traffic is allowed even if Netfilter +connection tracking is confused.
5/10/2003 - Shorewall Mirror in Asia
-
Ed Greshko has established a mirror in Taiwan -- Thanks Ed!
-
New Features:
+IPV6-IPV4 (6to4) tunnels are +now supported in the /etc/shorewall/tunnels file.
+You may now change the leading portion of the --log-prefix used +by Shorewall using the LOGMARKER variable in shorewall.conf. By +default, "Shorewall:" is used.
+5/10/2003 - Shorewall Mirror in Asia
+Ed Greshko has established a mirror in Taiwan -- Thanks Ed!
5/8/2003 - Shorewall Mirror in Chile
-Thanks to Darcy Ganga, there is now an HTTP mirror in Santiago -Chile. -4/21/2003 - Samples updated for Shorewall version -1.4.2
+Thanks to Darcy Ganga, there is now an HTTP mirror in Santiago +Chile.
+4/21/2003 - Samples updated for Shorewall version 1.4.2
Thanks to Francesca Smith, the sample configurations are now upgraded to Shorewall version 1.4.2.
-4/9/2003 - Shorewall 1.4.2
-
Problems Corrected:
----
-- TCP connection requests rejected out of the common -chain -are now properly rejected with TCP RST; previously, some of these -requests were rejected with an ICMP port-unreachable response.
-- 'traceroute -I' from behind the firewall previously timed out -on the first hop (e.g., to the firewall). This has been worked -around.
-
New Features:
+4/9/2003 - Shorewall 1.4.2
+Problems Corrected:
TCP connection requests +rejected out of the common chain are now properly rejected with +TCP RST; previously, some of these requests were rejected with an ICMP +port-unreachable response.
'traceroute -I' from behind the firewall previously +timed out on the first hop (e.g., to the firewall). This has been +worked around.+
New Features:
+Where an entry in the/etc/shorewall/hosts file specifies a +particular host or network, Shorewall now creates an intermediate chain +for handling input from the related zone. This can substantially reduce +the number of rules traversed by connections requests from such zones.
+Any file may include an INCLUDE directive. An INCLUDE directive
consists of the word INCLUDE followed by a file name and causes the
contents of the named file to be logically included into the file
-containing the INCLUDE. File names given in an INCLUDE directive
-are assumed to reside in /etc/shorewall or in an alternate
-configuration directory if one has been specified for the
-command.
+containing the INCLUDE. File names given in an INCLUDE directive are
+assumed to reside in /etc/shorewall or in an alternate configuration
+directory if one has been specified for the command.
Examples:
shorewall/params.mgmt:
@@ -6795,1204 +7392,1349 @@ net:$BACKUP_SERVERS tcp 22
INCLUDE rules.mgmt
# rules unique to this host here
- #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO
-NOT REMOVE
+ #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT
+REMOVE
----- end rules -----
INCLUDE's may be nested to a level of 3 -- further nested INCLUDE
-directives are ignored with a warning message.
-
+directives are ignored with a warning message.
Routing traffic from an interface back out that interface
continues to be a problem. While I firmly believe that this should
never happen, people continue to want to do it. To limit the damage
-that such nonsense produces, I have added a new 'routeback' option
-in /etc/shorewall/interfaces and /etc/shorewall/hosts. When used in
-/etc/shorewall/interfaces, the 'ZONE' column may not contain '-';
-in other words, 'routeback' can't be used as an option for a
-multi-zone interface. The 'routeback' option CAN be specified
-however on individual group entries in /etc/shorewall/hosts.
+that such nonsense produces, I have added a new 'routeback' option in
+/etc/shorewall/interfaces and /etc/shorewall/hosts. When used in
+/etc/shorewall/interfaces, the 'ZONE' column may not contain '-'; in
+other words, 'routeback' can't be used as an option for a multi-zone
+interface. The 'routeback' option CAN be specified however on
+individual group entries in /etc/shorewall/hosts.
-The 'routeback' option is similar to the old 'multi' option with
-two exceptions:
+The 'routeback' option is similar to the old 'multi' option with two
+exceptions:
a) The option pertains to a particular
zone,interface,address tuple.
- b) The option only created infrastructure to pass
-traffic from (zone,interface,address) tuples back to themselves
-(the 'multi' option affected all (zone,interface,address) tuples
-associated with the given 'interface').
+ b) The option only created infrastructure to pass traffic
+from (zone,interface,address) tuples back to themselves (the 'multi'
+option affected all (zone,interface,address) tuples associated with the
+given 'interface').
See the 'Upgrade Issues' for
-information about how this new option may affect your
-configuration.
+information about how this new option may affect your configuration.
3/24/2003 - Shorewall 1.4.1
- -This release follows up on 1.4.0. It corrects a problem
-introduced in 1.4.0 and removes additional warts.
+
3/24/2003 - Shorewall 1.4.1
+This release follows up on 1.4.0. It corrects a problem introduced
+in 1.4.0 and removes additional warts.
-Problems Corrected:
-
When Shorewall 1.4.0 is run under the ash shell (such as on Bering/LEAF), it can attempt to add ECN disabling rules even if the -/etc/shorewall/ecn file is empty. That problem has been corrected -so that ECN disabling rules are only added if there are entries in -/etc/shorewall/ecn.
New Features:
Note: In the list that follows, the term group -refers to a particular network or subnetwork (which may be -0.0.0.0/0 or it may be a host address) accessed through a -particular interface. Examples:+eth3:192.0.2.123 +
-eth0:0.0.0.0/0+
+refers to a particular network or subnetwork (which may be 0.0.0.0/0 +or it may be a host address) accessed through a particular interface. +Examples:eth0:0.0.0.0/0-You can use the "shorewall check" command to see the groups -associated with each of your zones.
eth2:192.168.1.0/24
-eth3:192.0.2.123
-
-
You can use the "shorewall check" command to +see the groups associated with each of your zones.
Beginning with Shorewall 1.4.1, if a +zone Z comprises more than one group then if there is no explicit Z to +Z policy and there are no rules governing traffic from Z to Z then +Shorewall will permit all traffic between the groups in the zone.
+Beginning with Shorewall 1.4.1, +Shorewall will never create rules to handle traffic from a group to +itself.
+A NONE policy is introduced in 1.4.1. When a policy of NONE is +specified from Z1 to Z2:
+There may be no rules created that +govern connections from Z1 to Z2.
+Shorewall will not create any infrastructure to handle traffic +from Z1 to Z2.
+3/17/2003 - Shorewall 1.4.0
-Shorewall 1.4 represents the next step in the evolution of -Shorewall. The main thrust of the initial release is simply to -remove the cruft that has accumulated in Shorewall over time.See the upgrade issues for a +discussion of how these changes may affect your configuration.
+3/17/2003 - Shorewall 1.4.0
+Shorewall 1.4 represents the next step in the evolution of
+Shorewall. The main thrust of the initial release is simply to remove
+the cruft that has accumulated in Shorewall over time.
-IMPORTANT: Shorewall 1.4.0 requires the iproute package
-('ip' utility).
+IMPORTANT:
+Shorewall 1.4.0 requires the iproute package ('ip'
+utility).
-Function from 1.3 that has been omitted from this version
-include:
+Function from 1.3 that has been omitted from
+this version include:
The MERGE_HOSTS variable in shorewall.conf is no longer
supported. Shorewall 1.4 behavior is the same as 1.3 with
-MERGE_HOSTS=Yes.
-
+MERGE_HOSTS=Yes.
Interface names of the form <device>:<integer> in +/etc/shorewall/interfaces now generate an error.
Shorewall 1.4 implements behavior consistent with +OLD_PING_HANDLING=No. OLD_PING_HANDLING=Yes will generate an error at +startup as will specification of the 'noping' or 'filterping' interface +options.
The 'routestopped' option in the /etc/shorewall/interfaces and +/etc/shorewall/hosts files is no longer supported and will generate an +error at startup if specified.
The Shorewall 1.2 syntax for DNAT and REDIRECT rules is no +longer accepted.
The ALLOWRELATED variable in shorewall.conf is no longer
supported. Shorewall 1.4 behavior is the same as 1.3 with
-ALLOWRELATED=Yes.
-
+ALLOWRELATED=Yes.
The icmp.def file has been removed.
Changes for 1.4 include:
The /etc/shorewall/shorewall.conf file has been completely +reorganized into logical sections.
LOG is now a valid action for a rule (/etc/shorewall/rules).
The firewall script and version file are now installed in +/usr/share/shorewall.
Late arriving DNS replies are now silently dropped in the common +chain by default.
In addition to behaving like OLD_PING_HANDLING=No, Shorewall 1.4 +no longer unconditionally accepts outbound ICMP packets. So if you want +to 'ping' from the firewall, you will need the appropriate rule or +policy.
CONTINUE is now a valid action for a rule (/etc/shorewall/rules).
802.11b devices with names of the form wlan<n> now support +the 'maclist' option.
Explicit Congestion Notification (ECN - RFC 3168) may now be
+turned off on a host or network basis using the new /etc/shorewall/ecn
+file. To use this facility:
a) You must be running kernel 2.4.20
b) You must have applied the patch in
http://www.shorewall/net/pub/shorewall/ecn/patch.
- c) You must have iptables 1.2.7a installed.
-
+ c) You must have iptables 1.2.7a installed.
The /etc/shorewall/params file is now processed first so that +variables may be used in the /etc/shorewall/shorewall.conf file.
Shorewall now gives a more helpful diagnostic when the +'ipchains' compatibility kernel module is loaded and a 'shorewall +start' command is issued.
The SHARED_DIR variable has been removed from shorewall.conf. +This variable was for use by package maintainers and was not documented +for general use.
+Shorewall now ignores 'default' routes when detecting masq'd +networks.
3/10/2003 - Shoreall 1.3.14a
A roleup of the following bug fixes and other updates:
There is an updated rfc1918 file that reflects the resent +allocation of 222.0.0.0/8 and 223.0.0.0/8.
+The documentation for the +routestopped file claimed that a comma-separated list could appear in +the second column while the code only supported a single host or +network address.
+Log messages produced by +'logunclean' and 'dropunclean' were not rate-limited.
+802.11b devices with names of the +form wlan<n> don't support the 'maclist' interface +option.
+Log messages generated by RFC 1918 +filtering are not rate limited.
+The firewall fails to start in the case where you have "eth0 +eth1" in /etc/shorewall/masq and the default route is through eth1
+2/8/2003 - Shoreawall 1.3.14
New features include
An OLD_PING_HANDLING option has been added to shorewall.conf.
+When set to Yes, Shorewall ping handling is as it has always been (see
+http://www.shorewall.net/ping.html).
+When OLD_PING_HANDLING=No, icmp echo (ping) is handled via rules and
+policies just like any other connection request. The FORWARDPING=Yes
+option in shorewall.conf and the 'noping' and 'filterping' options in
+/etc/shorewall/interfaces will all generate an error.
It is now possible to direct
+Shorewall to create a "label" such as "eth0:0" for IP addresses
+that it creates under ADD_IP_ALIASES=Yes and ADD_SNAT_ALIASES=Yes. This
+is done by specifying the label instead of just the interface name:
a) In the INTERFACE column of /etc/shorewall/masq
b) In the INTERFACE column of /etc/shorewall/nat
-
Support for OpenVPN Tunnels.
Support for VLAN devices with names of the form $DEV.$VID (e.g., +eth0.0)
+In /etc/shorewall/tcrules, the MARK value may be optionally
followed by ":" and either 'F' or 'P' to designate that the marking
-will occur in the FORWARD or PREROUTING chains respectively. If
-this additional specification is omitted, the chain used to mark
-packets will be determined by the setting of the
-MARK_IN_FORWARD_CHAIN option in shorewall.conf.
-
+will occur in the FORWARD or PREROUTING chains respectively. If this
+additional specification is omitted, the chain used to mark packets
+will be determined by the setting of the MARK_IN_FORWARD_CHAIN option
+in shorewall.conf.
When an interface name is entered in the SUBNET column of the
+/etc/shorewall/masq file, Shorewall previously masqueraded traffic from
+only the first subnet defined on that interface. It did not masquerade
+traffic from:
a) The subnets associated with other addresses on the
interface.
b) Subnets accessed through local routers.
-Beginning with Shorewall 1.3.14, if you enter an interface name in
-the SUBNET column, shorewall will use the firewall's routing table
-to construct the masquerading/SNAT rules.
+Beginning with Shorewall 1.3.14, if you enter an interface name in the
+SUBNET column, shorewall will use the firewall's routing table to
+construct the masquerading/SNAT rules.
Example 1 -- This is how it works in 1.3.14.
-
-
[root@gateway test]# cat /etc/shorewall/masq-
- #INTERFACE SUBNET ADDRESS
- eth0 eth2 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# ip route show dev eth2-
- 192.168.1.0/24 scope link
- 192.168.10.0/24 proto kernel scope link src 192.168.10.254
-
[root@gateway test]# shorewall start-
- ...
- Masqueraded Subnets and Hosts:
- To 0.0.0.0/0 from 192.168.1.0/24 through eth0 using 206.124.146.176
- To 0.0.0.0/0 from 192.168.10.0/24 through eth0 using 206.124.146.176
- Processing /etc/shorewall/tos... -
[root@gateway test]# cat /etc/shorewall/masq+
#INTERFACE SUBNET ADDRESS
eth0 eth2 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
[root@gateway test]# ip route show dev eth2
192.168.1.0/24 scope link
192.168.10.0/24 proto kernel scope link src 192.168.10.254
[root@gateway test]# shorewall start
...
Masqueraded Subnets and Hosts:
To 0.0.0.0/0 from 192.168.1.0/24 through eth0 using 206.124.146.176
To 0.0.0.0/0 from 192.168.10.0/24 through eth0 using 206.124.146.176
Processing /etc/shorewall/tos...
+When upgrading to Shorewall 1.3.14, if you have multiple local subnets
+connected to an interface that is specified in the SUBNET column of an
+/etc/shorewall/masq entry, your /etc/shorewall/masq file will need
+changing. In most cases, you will simply be able to remove redundant
+entries. In some cases though, you might want to change from using the
+interface name to listing specific subnetworks if the change described
+above will cause masquerading to occur on subnetworks that you don't
+wish to masquerade.
Example 2 -- Suppose that your current config is as follows:
-
-
[root@gateway test]# cat /etc/shorewall/masq-
- #INTERFACE SUBNET ADDRESS
- eth0 eth2 206.124.146.176
- eth0 192.168.10.0/24 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# ip route show dev eth2-
- 192.168.1.0/24 scope link
- 192.168.10.0/24 proto kernel scope link src 192.168.10.254
- [root@gateway test]# -
[root@gateway test]# cat /etc/shorewall/masq+
#INTERFACE SUBNET ADDRESS
eth0 eth2 206.124.146.176
eth0 192.168.10.0/24 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
[root@gateway test]# ip route show dev eth2
192.168.1.0/24 scope link
192.168.10.0/24 proto kernel scope link src 192.168.10.254
[root@gateway test]#
+ In this case, the second entry in /etc/shorewall/masq is
+no longer required.
Example 3 -- What if your current configuration is like this?
-
-
[root@gateway test]# cat /etc/shorewall/masq-
- #INTERFACE SUBNET ADDRESS
- eth0 eth2 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# ip route show dev eth2-
- 192.168.1.0/24 scope link
- 192.168.10.0/24 proto kernel scope link src 192.168.10.254
- [root@gateway test]# -
#INTERFACE SUBNET ADDRESS+ +
- eth0 192.168.1.0/24 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# cat /etc/shorewall/masq+
#INTERFACE SUBNET ADDRESS
eth0 eth2 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
[root@gateway test]# ip route show dev eth2
192.168.1.0/24 scope link
192.168.10.0/24 proto kernel scope link src 192.168.10.254
[root@gateway test]#
+ In this case, you would want to change the entry in
+/etc/shorewall/masq to:
#INTERFACE SUBNET ADDRESS
eth0 192.168.1.0/24 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
2/5/2003 - Shorewall Support included in Webmin 1.060
Webmin version 1.060 now has Shorewall support included as
-standard. See http://www.webmin.com.
+standard. See http://www.webmin.com.
-2/4/2003 - Shorewall 1.3.14-RC1
Includes the Beta 2 content plus support for OpenVPN -tunnels.
+2/4/2003 +- Shorewall 1.3.14-RC1 +Includes the Beta 2 content plus support for OpenVPN tunnels.
1/28/2003 - Shorewall 1.3.14-Beta2
-Includes the Beta 1 content plus restores VLAN device names of -the form $dev.$vid (e.g., eth0.1)
-1/25/2003 - Shorewall 1.3.14-Beta1
-
The Beta includes the following changes:
-
Includes the Beta 1 content plus restores VLAN device names of the +form $dev.$vid (e.g., eth0.1)
+1/25/2003 - Shorewall 1.3.14-Beta1
+The Beta includes the following changes:
An OLD_PING_HANDLING option has been added to shorewall.conf.
+When set to Yes, Shorewall ping handling is as it has always been (see
+http://www.shorewall.net/ping.html).
+When OLD_PING_HANDLING=No, icmp echo (ping) is handled via rules and
+policies just like any other connection request. The FORWARDPING=Yes
+option in shorewall.conf and the 'noping' and 'filterping' options in
+/etc/shorewall/interfaces will all generate an error.
It is now possible to direct
+Shorewall to create a "label" such as "eth0:0" for IP addresses
+that it creates under ADD_IP_ALIASES=Yes and ADD_SNAT_ALIASES=Yes. This
+is done by specifying the label instead of just the interface name:
a) In the INTERFACE column of /etc/shorewall/masq
b) In the INTERFACE column of /etc/shorewall/nat
-
When an interface name is entered in the SUBNET column of the
+/etc/shorewall/masq file, Shorewall previously masqueraded traffic from
+only the first subnet defined on that interface. It did not masquerade
+traffic from:
a) The subnets associated with other addresses on the
interface.
b) Subnets accessed through local routers.
-Beginning with Shorewall 1.3.14, if you enter an interface name in
-the SUBNET column, shorewall will use the firewall's routing table
-to construct the masquerading/SNAT rules.
+Beginning with Shorewall 1.3.14, if you enter an interface name in the
+SUBNET column, shorewall will use the firewall's routing table to
+construct the masquerading/SNAT rules.
Example 1 -- This is how it works in 1.3.14.
-
-
[root@gateway test]# cat /etc/shorewall/masq-
- #INTERFACE SUBNET ADDRESS
- eth0 eth2 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# ip route show dev eth2-
- 192.168.1.0/24 scope link
- 192.168.10.0/24 proto kernel scope link src 192.168.10.254
-
[root@gateway test]# shorewall start-
- ...
- Masqueraded Subnets and Hosts:
- To 0.0.0.0/0 from 192.168.1.0/24 through eth0 using 206.124.146.176
- To 0.0.0.0/0 from 192.168.10.0/24 through eth0 using 206.124.146.176
- Processing /etc/shorewall/tos... -
[root@gateway test]# cat /etc/shorewall/masq+
#INTERFACE SUBNET ADDRESS
eth0 eth2 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
[root@gateway test]# ip route show dev eth2
192.168.1.0/24 scope link
192.168.10.0/24 proto kernel scope link src 192.168.10.254
[root@gateway test]# shorewall start
...
Masqueraded Subnets and Hosts:
To 0.0.0.0/0 from 192.168.1.0/24 through eth0 using 206.124.146.176
To 0.0.0.0/0 from 192.168.10.0/24 through eth0 using 206.124.146.176
Processing /etc/shorewall/tos...
+When upgrading to Shorewall 1.3.14, if you have multiple local subnets
+connected to an interface that is specified in the SUBNET column of an
+/etc/shorewall/masq entry, your /etc/shorewall/masq file will need
+changing. In most cases, you will simply be able to remove redundant
+entries. In some cases though, you might want to change from using the
+interface name to listing specific subnetworks if the change described
+above will cause masquerading to occur on subnetworks that you don't
+wish to masquerade.
Example 2 -- Suppose that your current config is as follows:
-
-
[root@gateway test]# cat /etc/shorewall/masq-
- #INTERFACE SUBNET ADDRESS
- eth0 eth2 206.124.146.176
- eth0 192.168.10.0/24 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# ip route show dev eth2-
- 192.168.1.0/24 scope link
- 192.168.10.0/24 proto kernel scope link src 192.168.10.254
- [root@gateway test]# -
[root@gateway test]# cat /etc/shorewall/masq+
#INTERFACE SUBNET ADDRESS
eth0 eth2 206.124.146.176
eth0 192.168.10.0/24 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
[root@gateway test]# ip route show dev eth2
192.168.1.0/24 scope link
192.168.10.0/24 proto kernel scope link src 192.168.10.254
[root@gateway test]#
+ In this case, the second entry in /etc/shorewall/masq is
+no longer required.
Example 3 -- What if your current configuration is like this?
-
-
[root@gateway test]# cat /etc/shorewall/masq-
- #INTERFACE SUBNET ADDRESS
- eth0 eth2 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# ip route show dev eth2-
- 192.168.1.0/24 scope link
- 192.168.10.0/24 proto kernel scope link src 192.168.10.254
- [root@gateway test]# -
#INTERFACE SUBNET ADDRESS-
- eth0 192.168.1.0/24 206.124.146.176
- #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE -
[root@gateway test]# cat /etc/shorewall/masq+
#INTERFACE SUBNET ADDRESS
eth0 eth2 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
[root@gateway test]# ip route show dev eth2
192.168.1.0/24 scope link
192.168.10.0/24 proto kernel scope link src 192.168.10.254
[root@gateway test]#
+ In this case, you would want to change the entry in
+/etc/shorewall/masq to:
#INTERFACE SUBNET ADDRESS+
eth0 192.168.1.0/24 206.124.146.176
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
1/18/2003 - Shorewall 1.3.13 Documentation in PDF -Format
-Juraj Ontkanin has produced a PDF containing the Shorewall -1.3.13 documenation. the PDF may be downloaded from
- 1/18/2003 - Shorewall 1.3.13 Documentation in PDF Format +Juraj Ontkanin has produced a PDF containing the Shorewall 1.3.13 +documenation. the PDF may be downloaded from
+
+ftp://slovakia.shorewall.net/mirror/shorewall/pdf/
- http://slovakia.shorewall.net/pub/shorewall/pdf/
-
1/17/2003 - shorewall.net has MOVED
+ +http://slovakia.shorewall.net/pub/shorewall/pdf/ + +1/17/2003 - shorewall.net has MOVED
Thanks to the generosity of Alex Martin and Rett Consulting, www.shorewall.net and
-ftp.shorewall.net are now hosted on a system in Bellevue,
-Washington. A big thanks to Alex for making this happen.
-
1/13/2003 - Shorewall 1.3.13
-
Just includes a few things that I had on the burner:
-
1/13/2003 - Shorewall 1.3.13
+Just includes a few things that I had on the burner:
A new 'DNAT-' action has been added for entries in the
/etc/shorewall/rules file. DNAT- is intended for advanced users who
wish to minimize the number of rules that connection requests must
traverse.
-A Shorewall DNAT rule actually generates two iptables rules: a
-header rewriting rule in the 'nat' table and an ACCEPT rule in the
-'filter' table. A DNAT- rule only generates the first of these
-rules. This is handy when you have several DNAT rules that would
-generate the same ACCEPT rule.
+A Shorewall DNAT rule actually generates two iptables rules: a header
+rewriting rule in the 'nat' table and an ACCEPT rule in the 'filter'
+table. A DNAT- rule only generates the first of these rules. This is
+handy when you have several DNAT rules that would generate the same
+ACCEPT rule.
Here are three rules from my previous rules file:
- DNAT
-net dmz:206.124.146.177 tcp smtp - 206.124.146.178
- DNAT
-net dmz:206.124.146.177 tcp smtp - 206.124.146.179
+ DNAT net
+dmz:206.124.146.177 tcp smtp - 206.124.146.178
+ DNAT net
+dmz:206.124.146.177 tcp smtp - 206.124.146.179
ACCEPT net
dmz:206.124.146.177 tcp www,smtp,ftp,...
- These three rules ended up generating _three_ copies
-of
+ These three rules ended up generating _three_ copies of
ACCEPT net
dmz:206.124.146.177 tcp smtp
- By writing the rules this way, I end up with only one
-copy of the ACCEPT rule.
+ By writing the rules this way, I end up with only one copy
+of the ACCEPT rule.
DNAT- net
dmz:206.124.146.177 tcp smtp - 206.124.146.178
DNAT- net
dmz:206.124.146.177 tcp smtp - 206.124.146.179
ACCEPT net
-dmz:206.124.146.177 tcp www,smtp,ftp,....
-
+dmz:206.124.146.177 tcp www,smtp,ftp,....
The 'shorewall check' command now prints out the applicable +policy between each pair of zones.
A new CLEAR_TC option has been added to shorewall.conf. If this +option is set to 'No' then Shorewall won't clear the current traffic +control rules during [re]start. This setting is intended for use by +people that prefer to configure traffic shaping when the network +interfaces come up rather than when the firewall is started. If that is +what you want to do, set TC_ENABLED=Yes and CLEAR_TC=No and do not +supply an /etc/shorewall/tcstart file. That way, your traffic shaping +rules can still use the 'fwmark' classifier based on packet marking +defined in /etc/shorewall/tcrules.
A new SHARED_DIR variable has been added that allows
distribution packagers to easily move the shared directory (default
-/usr/lib/shorewall). Users should never have a need to change the
-value of this shorewall.conf setting.
+/usr/lib/shorewall). Users should never have a need to change the value
+of this shorewall.conf setting.
1/6/2003 - BURNOUT -
+1/6/2003 - BURNOUT
Until further notice, I will not be involved in either Shorewall Development or Shorewall Support
--Tom Eastep
-
-Tom Eastep
12/30/2002 - Shorewall Documentation in PDF Format
-Juraj Ontkanin has produced a PDF containing the Shorewall -1.3.12 documenation. the PDF may be downloaded from
- +
+ftp://slovakia.shorewall.net/mirror/shorewall/pdf/
- http://slovakia.shorewall.net/pub/shorewall/pdf/
-
12/27/2002 - Shorewall 1.3.12 Released
-Features include:
-
Features include:
"shorewall refresh" now reloads the +traffic shaping rules (tcrules and tcstart).
+"shorewall debug [re]start" now +turns off debugging after an error occurs. This places the point of the +failure near the end of the trace rather than up in the middle of it.
+"shorewall [re]start" has been +speeded up by more than 40% with my configuration. Your milage may +vary.
+A "shorewall show classifiers" +command has been added which shows the current packet classification +filters. The output from this command is also added as a separate page +in "shorewall monitor"
+ULOG (must be all caps) is now +accepted as a valid syslog level and causes the subject packets to be +logged using the ULOG target rather than the LOG target. This allows +you to run ulogd (available from http://www.gnumonks.org/projects/ulogd) +and log all Shorewall messages to a +separate log file.
+If you are running a kernel that has +a FORWARD chain in the mangle table ("shorewall show mangle" will show +you the chains in the mangle table), you can set +MARK_IN_FORWARD_CHAIN=Yes in shorewall.conf. +This allows for marking input packets based on their destination even +when you are using Masquerading or SNAT.
+I have cluttered up the +/etc/shorewall directory with empty 'init', 'start', 'stop' and +'stopped' files. If you already have a file with one of these names, +don't worry -- the upgrade process won't overwrite your file.
+I have added a new RFC1918_LOG_LEVEL variable to shorewall.conf. This variable
-specifies the syslog level at which packets are logged as a result
-of entries in the /etc/shorewall/rfc1918 file. Previously, these
-packets were always logged at the 'info' level.
+specifies the syslog level at which packets are logged as a result of
+entries in the /etc/shorewall/rfc1918 file. Previously, these packets
+were always logged at the 'info' level.
12/20/2002 - Shorewall 1.3.12 Beta 3
-
12/20/2002 - Shorewall 1.3.12 Beta 3
+This version corrects a problem with Blacklist logging. In Beta 2,
if BLACKLIST_LOG_LEVEL was set to anything but ULOG, the firewall
-would fail to start and "shorewall refresh" would also fail.
+would fail to start and "shorewall refresh" would also
+fail.
12/20/2002 - Shorewall 1.3.12 Beta 2
-The first public Beta version of Shorewall 1.3.12 is now
-available (Beta 1 was made available only to a limited
-audience).
-
The first public Beta version of Shorewall 1.3.12 is now available +(Beta 1 was made available only to a limited audience).
+Features include:
"shorewall refresh" now reloads the +traffic shaping rules (tcrules and tcstart).
+"shorewall debug [re]start" now +turns off debugging after an error occurs. This places the point of the +failure near the end of the trace rather than up in the middle of it.
+"shorewall [re]start" has been +speeded up by more than 40% with my configuration. Your milage may +vary.
+A "shorewall show classifiers" +command has been added which shows the current packet classification +filters. The output from this command is also added as a separate page +in "shorewall monitor"
+ULOG (must be all caps) is now +accepted as a valid syslog level and causes the subject packets to be +logged using the ULOG target rather than the LOG target. This allows +you to run ulogd (available from http://www.gnumonks.org/projects/ulogd) +and log all Shorewall messages to a +separate log file.
+If you are running a kernel that has +a FORWARD chain in the mangle table ("shorewall show mangle" will show +you the chains in the mangle table), you can set +MARK_IN_FORWARD_CHAIN=Yes in shorewall.conf. This allows for marking +input packets based on their destination even when you are using +Masquerading or SNAT.
+I have cluttered up the /etc/shorewall directory with empty +'init', 'start', 'stop' and 'stopped' files. If you already have a file +with one of these names, don't worry -- the upgrade process won't +overwrite your file.
+You may download the Beta from:
http://www.shorewall.net/pub/shorewall/Beta+ ftp://ftp.shorewall.net/pub/shorewall/Beta
- ftp://ftp.shorewall.net/pub/shorewall/Beta
-
12/12/2002 - Mandrake Multi Network Firewall 
+ href="http://www.mandrakesoft.com/">
12/7/2002 - Shorewall Support for Mandrake 9.0
-Two months and 3 days after I ordered Mandrake 9.0, it was -finally delivered. I have installed 9.0 on one of my systems and I -am now in a position to support Shorewall users who run Mandrake -9.0.
-12/6/2002 - Debian 1.3.11a Packages Available
-
Apt-get sources listed at http://security.dsi.unimi.it/~lorenzo/debian.html.
+Two months and 3 days after I ordered Mandrake 9.0, it was finally +delivered. I have installed 9.0 on one of my systems and I am now in +a position to support Shorewall users who run Mandrake 9.0.
+12/6/2002 - Debian 1.3.11a Packages Available
+Apt-get sources listed at +http://security.dsi.unimi.it/~lorenzo/debian.html.
12/3/2002 - Shorewall 1.3.11a
-This is a bug-fix roll up which includes Roger Aich's fix for -DNAT with excluded subnets (e.g., "DNAT foo!bar ..."). Current +
This is a bug-fix roll up which includes Roger Aich's fix for DNAT +with excluded subnets (e.g., "DNAT foo!bar ..."). Current 1.3.11 users who don't need rules of this type need not upgrade to 1.3.11.
11/24/2002 - Shorewall 1.3.11
In this version:
A 'tcpflags' option has been added +to entries in /etc/shorewall/interfaces. +This option causes Shorewall to make a set of sanity check on TCP +packet header flags.
+It is now allowed to use 'all' in
+the SOURCE or DEST column in a rule.
+When used, 'all' must appear by itself (in may not be qualified) and it
+does not enable intra-zone traffic. For example, the rule
ACCEPT loc all tcp 80
-does not enable http traffic from 'loc' to 'loc'.
Shorewall's use of the 'echo' +command is now compatible with bash clones such as ash and dash.
+fw->fw policies now generate a startup error. fw->fw rules +generate a warning and are ignored
+11/14/2002 - Shorewall Documentation in PDF Format
-Juraj Ontkanin has produced a PDF containing the Shorewall -1.3.10 documenation. the PDF may be downloaded from
- +
+ftp://slovakia.shorewall.net/mirror/shorewall/pdf/
- http://slovakia.shorewall.net/pub/shorewall/pdf/
-
11/09/2002 - Shorewall is Back at SourceForge
-The main Shorewall 1.3 web site is now back at SourceForge at http://shorewall.sf.net.
-
11/09/2002 - Shorewall is Back at SourceForge
+The main Shorewall 1.3 web site is now back at SourceForge at +http://shorewall.sf.net.
11/09/2002 - Shorewall 1.3.10
In this version:
You may now define the contents of a zone dynamically +with the "shorewall add" +and "shorewall delete" commands. These commands are expected to be used primarily within FreeS/Wan -updown -scripts.
Shorewall can now do MAC verification on ethernet segments. +You can specify the set of allowed MAC addresses on the segment and you +can optionally tie each MAC address to one or more IP addresses.
+PPTP Servers and Clients running on +the firewall system may now be defined in the /etc/shorewall/tunnels file.
+A new 'ipsecnat' tunnel type is +supported for use when the remote IPSEC +endpoint is behind a NAT gateway.
+The PATH used by Shorewall may now +be specified in /etc/shorewall/shorewall.conf. +
+The main firewall script is now /usr/lib/shorewall/firewall. The +script in /etc/init.d/shorewall is very small and uses /sbin/shorewall +to do the real work. This change makes custom distributions such as for +Debian and for Gentoo easier to manage since it is +/etc/init.d/shorewall that tends to have distribution-dependent code
+10/24/2002 - Shorewall is now in Gentoo Linux
-
10/23/2002 - Shorewall 1.3.10 Beta 1
-In this version:10/24/2002 - Shorewall is now in Gentoo Linux
+Alexandru Hartmann reports that his Shorewall package is now a +part of the Gentoo Linux +distribution. Thanks Alex!
+10/23/2002 - Shorewall 1.3.10 Beta 1
+In this version:
You may now define the contents of a zone dynamically +with the "shorewall add" +and "shorewall delete" commands. These commands are expected to be used primarily within FreeS/Wan -updown -scripts.
Shorewall can now do MAC verification on ethernet segments. +You can specify the set of allowed MAC addresses on the segment and you +can optionally tie each MAC address to one or more IP addresses.
+PPTP Servers and Clients running on +the firewall system may now be defined in the /etc/shorewall/tunnels file.
+A new 'ipsecnat' tunnel type is +supported for use when the remote IPSEC +endpoint is behind a NAT gateway.
+The PATH used by Shorewall may now +be specified in /etc/shorewall/shorewall.conf. +
+The main firewall script is now /usr/lib/shorewall/firewall. The +script in /etc/init.d/shorewall is very small and uses /sbin/shorewall +to do the real work. This change makes custom distributions such as for +Debian and for Gentoo easier to manage since it is +/etc/init.d/shorewall that tends to have distribution-dependent code.
+You may download the Beta from:
10/10/2002 - Debian 1.3.9b Packages Available
-
Apt-get sources listed at http://security.dsi.unimi.it/~lorenzo/debian.html.
+10/10/2002 - Debian 1.3.9b Packages Available
+Apt-get sources listed at +http://security.dsi.unimi.it/~lorenzo/debian.html.
10/9/2002 - Shorewall 1.3.9b
-This release rolls up fixes to the installer and to the firewall -script.This release rolls up fixes to the installer and to the firewall +script.
10/6/2002 - Shorewall.net now running on RH8.0
-The firewall and server here at shorewall.net are now running
-RedHat release 8.0.
+The
+firewall and server here at shorewall.net are now running RedHat
+release 8.0.
9/30/2002 - Shorewall 1.3.9a
Roles up the fix for broken tunnels.
9/30/2002 - TUNNELS Broken in 1.3.9!!!
-There is an updated firewall script at There is an updated firewall script at +ftp://www.shorewall.net/pub/shorewall/errata/1.3.9/firewall --- copy that file to /usr/lib/shorewall/firewall.9/28/2002 - Shorewall 1.3.9
-In this version:
-
In this version:
DNS Names are now +allowed in Shorewall config files (although I recommend against using +them).
+The connection SOURCE may now be +qualified by both interface and IP address in a Shorewall rule.
+Shorewall startup is now disabled +after initial installation until the file +/etc/shorewall/startup_disabled is removed. This avoids nasty surprises +during reboot for users who install Shorewall but don't configure it.
+The 'functions' and 'version' files and the 'firewall' symbolic +link have been moved from /var/lib/shorewall to /usr/lib/shorewall to +appease the LFS police at Debian.
9/23/2002 - Full Shorewall Site/Mailing List Archive Search
-Capability Restored
-
A couple of recent configuration changes
-at www.shorewall.net broke the Search facility:--Hopefully these problems are now corrected. --
-- Mailing List Archive Search was not available.
-- The Site Search index was incomplete
-- Only one page of matches was presented.
-
9/23/2002 - Full Shorewall Site/Mailing List Archive Search
-Capability Restored
-
A
+couple of recent configuration changes at www.shorewall.net broke the
+Search facility:
Mailing List Archive Search +was not available.+
The Site Search index was +incomplete+
Only one page of matches was presented.+
9/18/2002 - Debian 1.3.8 Packages Available
-
Apt-get sources listed at http://security.dsi.unimi.it/~lorenzo/debian.html.
+Hopefully these problems are now corrected.
+9/23/2002 - Full Shorewall Site/Mailing List Archive Search +Capability Restored
+A couple of recent configuration changes at www.shorewall.net had +the negative effect of breaking the Search facility:
+Mailing List Archive Search was not +available.
+The Site Search index was incomplete +
+Only one page of matches was presented.
+Hopefully these problems are now corrected.
+9/18/2002 - Debian 1.3.8 Packages Available
+Apt-get sources listed at +http://security.dsi.unimi.it/~lorenzo/debian.html.
9/16/2002 - Shorewall 1.3.8
-In this version:
-
In this version:
A NEWNOTSYN +option has been added to shorewall.conf. This option determines whether Shorewall accepts TCP packets which are not part of an established connection and that are not 'SYN' packets (SYN flag on and ACK flag -off).
The need for the 'multi' option to +communicate between zones za and zb on the same interface is removed in +the case where the chain 'za2zb' and/or 'zb2za' exists. 'za2zb' will +exist if:
There is a policy for za to zb; +or
+There is at least one rule for za to zb.
+The /etc/shorewall/blacklist file now contains three columns. In +addition to the SUBNET/ADDRESS column, there are optional PROTOCOL and +PORT columns to block only certain applications from the blacklisted +addresses.
9/11/2002 - Debian 1.3.7c Packages Available
-Apt-get sources listed at http://security.dsi.unimi.it/~lorenzo/debian.html.
+Apt-get sources listed at +http://security.dsi.unimi.it/~lorenzo/debian.html.
9/2/2002 - Shorewall 1.3.7c
-This is a role up of a fix for "DNAT" rules where the source -zone is $FW (fw).
+This is a role up of a fix for "DNAT" rules where the +source zone is $FW (fw).
8/31/2002 - I'm not available
I'm currently on vacation -- please respect my need for a couple of weeks free of Shorewall problem reports.
-Tom
8/26/2002 - Shorewall 1.3.7b
-This is a role up of the "shorewall refresh" bug fix and the -change which reverses the order of "dhcp" and "norfc1918" -checking.
+This is a role up of the "shorewall refresh" bug fix and +the change which reverses the order of "dhcp" and +"norfc1918" checking.
8/26/2002 - French FTP Mirror is Operational
-ftp://france.shorewall.net/pub/mirrors/shorewall +
ftp://france.shorewall.net/pub/mirrors/shorewall is now available.
8/25/2002 - Shorewall Mirror in France
-Thanks to a Shorewall user in Paris, the Shorewall web site is -now mirrored at http://france.shorewall.net.
-8/25/2002 - Shorewall 1.3.7a Debian Packages -Available
+Thanks to a Shorewall user in Paris, the Shorewall web site is now +mirrored at http://france.shorewall.net.
+8/25/2002 - Shorewall 1.3.7a Debian Packages Available
Lorenzo Martignoni reports that the packages for version 1.3.7a are available at http://security.dsi.unimi.it/~lorenzo/debian.html.
8/22/2002 - Shorewall 1.3.7 Wins a Brown Paper Bag Award for
its Author -- Shorewall 1.3.7a released
1.3.7a corrects problems occurring in rules file processing when starting Shorewall 1.3.7.
8/22/2002 - Shorewall 1.3.7 Released 8/13/2002
Features in this release include:
The 'icmp.def' file is now empty! +The rules in that file were required in ipchains firewalls but are not +required in Shorewall. Users who have ALLOWRELATED=No in shorewall.conf should see the Upgrade Issues.
+A 'FORWARDPING' option has been +added to shorewall.conf. The +effect of setting this variable to Yes is the same as the effect of +adding an ACCEPT rule for ICMP echo-request in /etc/shorewall/icmpdef. +Users who have such a rule in icmpdef are encouraged to switch to +FORWARDPING=Yes.
+The loopback CLASS A Network +(127.0.0.0/8) has been added to the rfc1918 file.
+Shorewall now works with iptables +1.2.7
+The documentation and web site no longer uses FrontPage themes.
+I would like to thank John Distler for his valuable input -regarding TCP SYN and ICMP treatment in Shorewall. That input has -led to marked improvement in Shorewall in the last two -releases.
-8/13/2002 - Documentation in the CVS +regarding TCP SYN and ICMP treatment in Shorewall. That input has led +to marked improvement in Shorewall in the last two releases.
+8/13/2002 - Documentation in the CVS Repository
The Shorewall-docs project now contains just the HTML and image files - the Frontpage files have been removed.
8/7/2002 - STABLE branch added to CVS + href="http://www.shorewall.net/cgi-bin/cvs/cvsweb.cgi" target="_top">CVS Repository
-This branch will only be updated after I release a new version -of Shorewall so you can always update from this branch to get the -latest stable tree.
+This branch will only be updated after I release a new version of +Shorewall so you can always update from this branch to get the latest +stable tree.
8/7/2002 - Upgrade Issues -section added to the Errata Page
+section added to the Errata PageNow there is one place to go to look for issues involved with upgrading to recent versions of Shorewall.
8/7/2002 - Shorewall 1.3.6
-This is primarily a bug-fix rollup with a couple of new -features:
+This is primarily a bug-fix rollup with a couple of new features:
The latest QuickStart Guides including +the Shorewall Setup Guide.
+Shorewall will now DROP TCP packets +that are not part of or related to an existing connection and that are +not SYN packets. These "New not SYN" packets may be optionally logged +by setting the LOGNEWNOTSYN option in /etc/shorewall/shorewall.conf. +
+The processing of "New not SYN" packets may be extended by commands in the new newnotsyn -extension -script.
7/30/2002 - Shorewall 1.3.5b Released
This interim release:
Causes the firewall script to remove +the lock file if it is killed.
+Once again allows lists in the +second column of the /etc/shorewall/hosts +file.
+Includes the latest QuickStart +Guides.
+7/29/2002 - New Shorewall Setup Guide Available
-The first draft of this guide is available at http://www.shorewall.net/shorewall_setup_guide.htm. -The guide is intended for use by people who are setting up -Shorewall to manage multiple public IP addresses and by people who -want to learn more about Shorewall than is described in the -single-address guides. Feedback on the new guide is welcome.
+The first draft of this guide is available at +http://www.shorewall.net/shorewall_setup_guide.htm. +The guide is intended for use by people who are setting up Shorewall +to manage multiple public IP addresses and by people who want to +learn more about Shorewall than is described in the single-address +guides. Feedback on the new guide is welcome.
7/28/2002 - Shorewall 1.3.5 Debian Package Available
Lorenzo Martignoni reports that the packages are version 1.3.5a -and are available at http://security.dsi.unimi.it/~lorenzo/debian.html.
+and are available at +http://security.dsi.unimi.it/~lorenzo/debian.html.7/27/2002 - Shorewall 1.3.5a Released
-This interim release restores correct handling of REDIRECT -rules.
+This interim release restores correct handling of REDIRECT rules.
7/26/2002 - Shorewall 1.3.5 Released
-This will be the last Shorewall release for a while. I'm going -to be focusing on rewriting a lot of the documentation.
-In this version:
+This will be the last Shorewall release for a while. I'm going to +be focusing on rewriting a lot of the documentation.
+In this version:
Empty and invalid source and +destination qualifiers are now detected in the rules file. It is a good +idea to use the 'shorewall check' command before you issue a 'shorewall +restart' command be be sure that you don't have any configuration +problems that will prevent a successful restart.
+Added MERGE_HOSTS variable +in shorewall.conf to provide +saner behavior of the /etc/shorewall/hosts file.
+The time that the counters were last +reset is now displayed in the heading of the 'status' and 'show' +commands.
+A proxyarp option has been +added for entries in /etc/shorewall/interfaces. +This option facilitates Proxy ARP sub-netting as described in the Proxy ARP subnetting mini-HOWTO (http://www.tldp.org/HOWTO/mini/Proxy-ARP-Subnet/). -Specifying the proxyarp option for an interface causes Shorewall to -set /proc/sys/net/ipv4/conf/<interface>/proxy_arp.
The Samples have been updated to reflect the new capabilities in +this release.
+7/16/2002 - New Mirror in Argentina
-Thanks to Arturo "Buanzo" Busleiman, there is now a Shorewall -mirror in Argentina. Thanks Buanzo!!!
+Thanks to Arturo "Buanzo" Busleiman, there is now a +Shorewall mirror in Argentina. Thanks Buanzo!!!
7/16/2002 - Shorewall 1.3.4 Released
In this version:
A new /etc/shorewall/routestopped +file has been added. This file is intended to eventually replace the routestopped +option in the /etc/shorewall/interface and /etc/shorewall/hosts files. +This new file makes remote firewall administration easier by allowing +any IP or subnet to be enabled while Shorewall is stopped.
+An /etc/shorewall/stopped extension script has been added. +This script is invoked after Shorewall has stopped.
+A DETECT_DNAT_ADDRS option +has been added to /etc/shoreall/shorewall.conf. +When this option is selected, DNAT rules only apply when the +destination address is the external interface's primary IP address.
+The QuickStart Guide has been +broken into three guides and has been almost entirely rewritten.
+The Samples have been updated to reflect the new capabilities in +this release.
+7/8/2002 - Shorewall 1.3.3 Debian Package Available
-Lorenzo Marignoni reports that the packages are available at http://security.dsi.unimi.it/~lorenzo/debian.html.
+Lorenzo Marignoni reports that the packages are available at +http://security.dsi.unimi.it/~lorenzo/debian.html.
7/6/2002 - Shorewall 1.3.3 Released
In this version:
Entries in /etc/shorewall/interface +that use the wildcard character ("+") now have the "multi" option +assumed.
+The 'rfc1918' chain in the mangle +table has been renamed 'man1918' to make log messages generated from +that chain distinguishable from those generated by the 'rfc1918' chain +in the filter table.
+Interface names appearing in the +hosts file are now validated against the interfaces file.
+The TARGET column in the rfc1918 +file is now checked for correctness.
+The chain structure in the nat table +has been changed to reduce the number of rules that a packet must +traverse and to correct problems with NAT_BEFORE_RULES=No
+The "hits" command has been enhanced.
+6/25/2002 - Samples Updated for 1.3.2
The comments in the sample configuration files have been updated to reflect new features introduced in Shorewall 1.3.2.
6/25/2002 - Shorewall 1.3.1 Debian Package Available
-Lorenzo Marignoni reports that the package is available at http://security.dsi.unimi.it/~lorenzo/debian.html.
+Lorenzo Marignoni reports that the package is available at +http://security.dsi.unimi.it/~lorenzo/debian.html.
6/19/2002 - Documentation Available in PDF Format
Thanks to Mike Martinez, the Shorewall Documentation is now -available for download in Adobe PDF format.
+available for download in Adobe +PDF format.6/16/2002 - Shorewall 1.3.2 Released
In this version:
A logwatch command has been added +to /sbin/shorewall.
+A dynamic +blacklist facility has been added.
+Support for the Netfilter multiport match function +has been added.
+The files firewall, functions and version have +been moved from /etc/shorewall to /var/lib/shorewall.
+6/6/2002 - Why CVS Web access is Password Protected
Last weekend, I installed the CVS Web package to provide brower-based access to the Shorewall CVS repository. Since then, I -have had several instances where my server was almost unusable due -to the high load generated by website copying tools like HTTrack -and WebStripper. These mindless tools:
+have had several instances where my server was almost unusable due to +the high load generated by website copying tools like HTTrack and +WebStripper. These mindless tools:Ignore robot.txt files.
+Recursively copy everything that +they find.
+Should be classified as weapons rather than tools.
+These tools/weapons are particularly damaging when combined with -CVS Web because they doggedly follow every link in the -cgi-generated HTML resulting in 1000s of executions of the -cvsweb.cgi script. Yesterday, I spend several hours implementing -measures to block these tools but unfortunately, these measures -resulted in my server OOM-ing under even moderate load.
-Until I have the time to understand the cause of the OOM (or -until I buy more RAM if that is what is required), CVS Web access -will remain Password Protected.
+CVS Web because they doggedly follow every link in the cgi-generated +HTML resulting in 1000s of executions of the cvsweb.cgi script. +Yesterday, I spend several hours implementing measures to block these +tools but unfortunately, these measures resulted in my server OOM-ing +under even moderate load. +Until I have the time to understand the cause of the OOM (or until +I buy more RAM if that is what is required), CVS Web access will +remain Password Protected.
6/5/2002 - Shorewall 1.3.1 Debian Package Available
-Lorenzo Marignoni reports that the package is available at http://security.dsi.unimi.it/~lorenzo/debian.html.
+Lorenzo Marignoni reports that the package is available at +http://security.dsi.unimi.it/~lorenzo/debian.html.
6/2/2002 - Samples Corrected
-The 1.3.0 samples configurations had several serious problems
-that prevented DNS and SSH from working properly. These problems
-have been corrected in the 1.3.1
+ The 1.3.0 samples configurations had several serious problems that
+prevented DNS and SSH from working properly. These problems have been
+corrected in the 1.3.1
samples. 6/1/2002 - Shorewall 1.3.1 Released Hot on the heels of 1.3.0, this release: Corrects a serious problem with "all
+ <zone> CONTINUE" policies. This problem is present in
+all versions of Shorewall that support the CONTINUE policy. These
+previous versions optimized away the "all2<zone>" chain
+and replaced it with the "all2all" chain with the usual result that a
+policy of REJECT was enforced rather than the intended CONTINUE policy.
+ Adds an /etc/shorewall/rfc1918
+file for defining the exact behavior of the 'norfc1918' interface option. 5/29/2002 - Shorewall 1.3.0 Released In addition to the changes in Beta 1, Beta 2 and RC1, Shorewall
1.3.0 includes: A 'filterping' interface option that allows ICMP echo-request
+(ping) requests addressed to the firewall to be handled by entries in
+/etc/shorewall/rules and /etc/shorewall/policy. 5/23/2002 - Shorewall 1.3 RC1 Available In addition to the changes in Beta 1 and Beta 2, RC1 (Version
1.2.92) incorporates the following: Support for the /etc/shorewall/whitelist file has been
withdrawn. If you need whitelisting, see these
-instructions.
-
-
-
.
5/19/2002 - Shorewall 1.3 Beta 2 Available
In addition to the changes in Beta 1, this release which carries the designation 1.2.91 adds:
The structure of the firewall is +changed markedly. There is now an INPUT and a FORWARD chain for each +interface; this reduces the number of rules that a packet must +traverse, especially in complicated setups.
+Sub-zones +may now be excluded from DNAT and REDIRECT rules.
+The names of the columns in a number +of the configuration files have been changed to be more consistent and +self-explanatory and the documentation has been updated accordingly.
+The sample configurations have been updated for 1.3.
+5/17/2002 - Shorewall 1.3 Beta 1 Available
Beta 1 carries the version designation 1.2.90 and implements the following features:
Simplified rule syntax which makes +the intent of each rule clearer and hopefully makes Shorewall easier to +learn.
+Upward compatibility with 1.2 +configuration files has been maintained so that current users can +migrate to the new syntax at their convenience.
+WARNING: Compatibility with the +old parameterized sample configurations has NOT been maintained. Users +still running those configurations should migrate to the new sample +configurations before upgrading to 1.3 Beta 1.
+5/4/2002 - Shorewall 1.2.13 is Available
In this version:
White-listing +is supported.
+SYN-flood +protection is added.
+IP addresses added under ADD_IP_ALIASES and ADD_SNAT_ALIASES +now inherit the VLSM and Broadcast Address of the interface's primary +IP address.
+The order in which port forwarding DNAT and Static DNAT can now be reversed so that port forwarding rules can override the contents of /etc/shorewall/nat.
4/30/2002 - Shorewall Debian News
-Lorenzo Marignoni reports that Shorewall 1.2.12 is now in both
-the Debian
+ Lorenzo Marignoni reports that Shorewall 1.2.12 is now in both the
+Debian
Testing Branch and the Debian
Unstable Branch. 4/20/2002 - Shorewall 1.2.12 is Available The 'try' command works again There is now a single RPM that also works with SuSE. 4/17/2002 - Shorewall Debian News Lorenzo Marignoni reports that: Shorewall 1.2.10 is in the Debian
-Testing Branch
-
-
Shorewall 1.2.11 is in the Debian -Unstable Branch
Thanks, Lorenzo!
4/16/2002 - Shorewall 1.2.11 RPM Available for SuSE
-Thanks to Stefan -Mohr, there is now a Shorewall 1.2.11 -SuSE RPM available.
+Thanks to Stefan Mohr, +there is now a Shorewall 1.2.11 SuSE +RPM available.
4/13/2002 - Shorewall 1.2.11 Available
In this version:
The 'try' command now accepts an +optional timeout. If the timeout is given in the command, the standard +configuration will automatically be restarted after the new +configuration has been running for that length of time. This prevents a +remote admin from being locked out of the firewall in the case where +the new configuration starts but prevents access.
+Kernel route filtering may now be +enabled globally using the new ROUTE_FILTER parameter in /etc/shorewall/shorewall.conf.
+Individual IP source addresses +and/or subnets may now be excluded from masquerading/SNAT.
+Simple "Yes/No" and "On/Off" values are now case-insensitive in +/etc/shorewall/shorewall.conf.
+4/13/2002 - Hamburg Mirror now has FTP
-Stefan now has an FTP mirror at ftp://germany.shorewall.net/pub/shorewall. +
Stefan now has an FTP mirror at +ftp://germany.shorewall.net/pub/shorewall. Thanks Stefan!
4/12/2002 - New Mirror in Hamburg
-Thanks to Stefan -Mohr, there is now a mirror of the Shorewall website at http://germany.shorewall.net.
-4/10/2002 - Shorewall QuickStart Guide Version 1.1 -Available
+Thanks to Stefan Mohr, +there is now a mirror of the Shorewall website at +http://germany.shorewall.net.
+4/10/2002 - Shorewall QuickStart Guide Version 1.1 Available
Version 1.1 of the -QuickStart Guide is now available. Thanks to those who have -read version 1.0 and offered their suggestions. Corrections have -also been made to the sample scripts.
-4/9/2002 - Shorewall QuickStart Guide Version 1.0 -Available
+QuickStart Guide is now available. Thanks to those who have read +version 1.0 and offered their suggestions. Corrections have also been +made to the sample scripts. +4/9/2002 - Shorewall QuickStart Guide Version 1.0 Available
Version 1.0 of the QuickStart Guide is now available. This Guide and its accompanying sample configurations are expected to provide a @@ -8007,616 +8749,903 @@ for the samples and I am recommending that they not be used in new Shorewall installations.
4/2/2002 - Updated Log Parser
John Lodge has provided -an updated version of his CGI-based -log parser with corrected -date handling.
+an updated version of his CGI-based +log parser with corrected date handling.3/30/2002 - Shorewall Website Search Improvements
The quick search on the home page now excludes the mailing list -archives. The Extended Search +archives. The Extended Search allows excluding the archives or restricting the search to just the archives. An archive search form is also available on the mailing list -information page.
-3/28/2002 - Debian Shorewall News (From Lorenzo -Martignoni)
+ href="http://lists.shorewall.net/mailing_list.htm">mailing +list information page. +3/28/2002 - Debian Shorewall News (From Lorenzo Martignoni)
The 1.2.10 Debian Package is +available at http://security.dsi.unimi.it/~lorenzo/debian.html. +
+Shorewall 1.2.9 is now in the Debian -Unstable Distribution.
3/25/2002 - Log Parser Available
-John Lodge has provided -a CGI-based log parser for +
John Lodge has provided a +CGI-based log parser for Shorewall. Thanks John.
3/20/2002 - Shorewall 1.2.10 Released
In this version:
A "shorewall try" command has been +added (syntax: shorewall try <configuration directory>). +This command attempts "shorewall -c <configuration directory> +start" and if that results in the firewall being stopped due to an +error, a "shorewall start" command is executed. The 'try' command +allows you to create a new configuration +and attempt to start it; if there is an error that leaves your firewall +in the stopped state, it will automatically be restarted using the +default configuration (in /etc/shorewall).
+A new variable ADD_SNAT_ALIASES has +been added to /etc/shorewall/shorewall.conf. +If this variable is set to "Yes", Shorewall will automatically add IP addresses listed in the third column of the /etc/shorewall/masq file.
Copyright notices have been added to the documenation.
+3/11/2002 - Shorewall 1.2.9 Released
In this version:
Filtering by MAC address has been added. MAC +addresses may be used as the source address in:
Filtering rules (/etc/shorewall/rules)
+Traffic Control Classification +Rules (/etc/shorewall/tcrules) +
+TOS Rules (/etc/shorewall/tos)
+Blacklist (/etc/shorewall/blacklist)
+Several bugs have been fixed
+The 1.2.9 Debian Package is also available at http://security.dsi.unimi.it/~lorenzo/debian.html. +
+3/1/2002 - 1.2.8 Debian Package is Available
See http://security.dsi.unimi.it/~lorenzo/debian.html
2/25/2002 - New Two-interface Sample
I've enhanced the two interface sample to allow access from the -firewall to servers in the local zone - -http://www.shorewall.net/pub/shorewall/LATEST.samples/two-interfaces.tgz
+firewall to servers in the local zone - +http://www.shorewall.net/pub/shorewall/LATEST.samples/two-interfaces.tgz2/23/2002 - Shorewall 1.2.8 Released
Do to a serious problem with 1.2.7, I am releasing 1.2.8. It corrects problems associated with the lock file used to prevent multiple state-changing operations from occuring simultaneously. My -apologies for any inconvenience my carelessness may have -caused.
+apologies for any inconvenience my carelessness may have caused.2/22/2002 - Shorewall 1.2.7 Released
In this version:
UPnP probes (UDP destination port +1900) are now silently dropped in the common chain
+RFC 1918 checking in the mangle +table has been streamlined to no longer require packet marking. RFC +1918 checking in the filter table has been changed to require half as +many rules as previously.
+A 'shorewall check' command has been added that does a cursory +validation of the zones, interfaces, hosts, rules and policy files.
+2/18/2002 - 1.2.6 Debian Package is Available
See http://security.dsi.unimi.it/~lorenzo/debian.html
2/8/2002 - Shorewall 1.2.6 Released
In this version:
$-variables may now be used anywhere +in the configuration files except /etc/shorewall/zones.
+The interfaces and hosts files now +have their contents validated before any changes are made to the +existing Netfilter configuration. The appearance of a zone name that +isn't defined in /etc/shorewall/zones causes "shorewall start" and +"shorewall restart" to abort without changing the Shorewall state. +Unknown options in either file cause a warning to be issued.
+A problem occurring when BLACKLIST_LOGLEVEL was not set has been +corrected.
+2/4/2002 - Shorewall 1.2.5 Debian Package Available
see http://security.dsi.unimi.it/~lorenzo/debian.html
2/1/2002 - Shorewall 1.2.5 Released
-Due to installation problems with Shorewall 1.2.4, I have -released Shorewall 1.2.5. Sorry for the rapid-fire development.
+Due to installation problems with Shorewall 1.2.4, I have released +Shorewall 1.2.5. Sorry for the rapid-fire development.
In version 1.2.5:
The installation problems have been +corrected.
+SNAT +is now supported.
+A "shorewall version" command has +been added
+The default value of the STATEDIR variable in +/etc/shorewall/shorewall.conf has been changed to /var/lib/shorewall in +order to conform to the GNU/Linux File Hierarchy Standard, Version 2.2. +
+1/28/2002 - Shorewall 1.2.4 Released
The "fw" zone may now be given a different name.
+You may now place end-of-line +comments (preceded by '#') in any of the configuration files
+There is now protection against +against two state changing operations occuring concurrently. This is +implemented using the 'lockfile' utility if it is available (lockfile +is part of procmail); otherwise, a less robust technique is used. The +lockfile is created in the STATEDIR defined in +/etc/shorewall/shorewall.conf and has the name "lock".
+"shorewall start" no longer fails if "detect" is specified in /etc/shorewall/interfaces for +an interface with subnet mask 255.255.255.255.
+1/27/2002 - Shorewall 1.2.3 Debian Package Available -- -see http://security.dsi.unimi.it/~lorenzo/debian.html
+1/27/2002 - Shorewall 1.2.3 Debian Package Available -- see +http://security.dsi.unimi.it/~lorenzo/debian.html
1/20/2002 - Corrected firewall script available
-Corrects a problem with BLACKLIST_LOGLEVEL. See the
+ Corrects a problem with BLACKLIST_LOGLEVEL. See the
errata for details. 1/19/2002 - Shorewall 1.2.3 Released This is a minor feature and bugfix release. The single new
-feature is: This is a minor feature and bugfix release. The single new feature
+is: Support for TCP MSS Clamp to PMTU -- This support is usually
+required when the internet connection is via PPPoE or PPTP and may be
+enabled using the CLAMPMSS
+option in /etc/shorewall/shorewall.conf. The following problems were corrected: The "shorewall status" command no
+longer hangs. The "shorewall monitor" command now
+displays the icmpdef chain The CLIENT PORT(S) column in tcrules is no longer ignored 1/18/2002 - Shorewall 1.2.2 packaged with new LEAF release
-
-
Jacques Nilo and Eric Wolzak have released a kernel 2.4.16 LEAF -distribution that includes Shorewall 1.2.2. See http://leaf.sourceforge.net/devel/jnilo +distribution that includes Shorewall 1.2.2. See +http://leaf.sourceforge.net/devel/jnilo for details.
-1/11/2002 - Debian Package (.deb) Now Available - Thanks
-to Lorenzo
-Martignoni, a 1.2.2 Shorewall Debian package is now available.
-There is a link to Lorenzo's site from the Shorewall
+ 1/11/2002 - Debian Package (.deb) Now Available - Thanks to
+Lorenzo Martignoni,
+a 1.2.2 Shorewall Debian package is now available. There is a link to
+Lorenzo's site from the Shorewall
download page. 1/9/2002 - Updated 1.2.2 /sbin/shorewall available - This corrected
-version restores the "shorewall status" command to health.
1/8/2002 - Shorewall 1.2.2 Released
In version 1.2.2
Support for IP blacklisting has been +added
You specify whether you want +packets from blacklisted hosts dropped or rejected using the BLACKLIST_DISPOSITION +setting in /etc/shorewall/shorewall.conf
+You specify whether you want +packets from blacklisted hosts logged and at what syslog level using +the BLACKLIST_LOGLEVEL +setting in /etc/shorewall/shorewall.conf
+You list the IP +addresses/subnets that you wish to blacklist in /etc/shorewall/blacklist
+You specify the interfaces you +want checked against the blacklist using the new "blacklist" option in +/etc/shorewall/interfaces.
+The black list is refreshed from +/etc/shorewall/blacklist by the "shorewall refresh" command.
+Use of TCP RST replies has been +expanded
TCP connection requests rejected +because of a REJECT policy are now replied with a TCP RST packet.
+TCP connection requests rejected +because of a protocol=all rule in /etc/shorewall/rules are now replied +with a TCP RST packet.
+A LOGFILE specification has been added to /etc/shorewall/shorewall.conf. LOGFILE is used to -tell the /sbin/shorewall program where to look for Shorewall -messages.
1/5/2002 - New Parameterized Samples (version 1.2.0) released. These are minor -updates -to the previously-released samples. There are two new rules -added:
+ target="_blank">version +1.2.0) released. These are minor updates to the +previously-released samples. There are two new rules added:Unless you have explicitly enabled +Auth connections (tcp port 113) to your firewall, these connections +will be REJECTED rather than DROPPED. This speeds up connection +establishment to some servers.
+Orphan DNS replies are now silently dropped.
+See the README file for upgrade instructions.
1/1/2002 - Shorewall Mailing List Moving
The Shorewall mailing list hosted at Sourceforge is moving to -Shorewall.net. If you are a current subscriber to the list at -Sourceforge, please see -these instructions. -If you would like to subscribe to the new list, visit http://www.shorewall.net/mailman/listinfo/shorewall-users.
+ href="http://sourceforge.net/">Sourceforge +is moving to Shorewall.net. If you are a current subscriber to the +list at Sourceforge, please see +these instructions. If you would like to subscribe to the new +list, visit +http://www.shorewall.net/mailman/listinfo/shorewall-users.12/31/2001 - Shorewall 1.2.1 Released
In version 1.2.1:
Logging of Mangled/Invalid +Packets is added.
+The tunnel +script has been corrected.
+'shorewall show tc' now correctly handles tunnels.
+12/21/2001 - Shorewall 1.2.0 Released! - I couldn't resist releasing 1.2 on 12/21/2001
Version 1.2 contains the following new features:
Support for Traffic Control/Shaping
+Support for Filtering of Mangled/Invalid Packets +
+Support for GRE Tunnels
+For the next month or so, I will continue to provide corrections to version 1.1.18 as necessary so that current version 1.1.x users -will not be forced into a quick upgrade to 1.2.0 just to have -access to bug fixes.
-For those of you who have installed one of the Beta RPMS, you -will need to use the "--oldpackage" option when upgrading to +will not be forced into a quick upgrade to 1.2.0 just to have access +to bug fixes.
+For those of you who have installed one of the Beta RPMS, you will +need to use the "--oldpackage" option when upgrading to 1.2.0:
--+rpm -Uvh --oldpackage shorewall-1.2-0.noarch.rpm
-
rpm -Uvh --oldpackage shorewall-1.2-0.noarch.rpm
12/19/2001 - Thanks to Steve -Cowles, there is now a -Shorewall mirror in Texas. This web site is mirrored at http://www.infohiiway.com/shorewall -and the ftp site is -at ftp://ftp.infohiiway.com/pub/mirrors/shorewall. -
+Cowles, there is now a Shorewall mirror in Texas. This web +site is mirrored at http://www.infohiiway.com/shorewall +and the ftp site is at +ftp://ftp.infohiiway.com/pub/mirrors/shorewall. +11/30/2001 - A new set of the parameterized Sample Configurations has been released. In this version:
Ping is now allowed between the +zones.
+In the three-interface configuration, it is now possible to +configure the internet services that are to be available to servers in +the DMZ.
+11/20/2001 - The current version of Shorewall is -1.1.18.
+11/20/2001 - The current version of Shorewall is 1.1.18.
In this version:
The spelling of ADD_IP_ALIASES has +been corrected in the shorewall.conf file
+The logic for deleting user-defined +chains has been simplified so that it avoids a bug in the LRP version +of the 'cut' utility.
+The /var/lib/lrpkg/shorwall.conf file has been corrected to +properly display the NAT entry in that file.
+11/19/2001 - Thanks to Juraj -Ontkanin, there is now a -Shorewall mirror in the Slovak Republic. The website is now -mirrored at http://www.nrg.sk/mirror/shorewall -and the FTP site is -mirrored at ftp://ftp.nrg.sk/mirror/shorewall.
+Ontkanin, there is now a Shorewall mirror in the Slovak Republic. +The website is now mirrored at http://www.nrg.sk/mirror/shorewall +and the FTP site is mirrored at ftp://ftp.nrg.sk/mirror/shorewall.11/2/2001 - Announcing Shorewall Parameter-driven Sample Configurations. There are three sample configurations:
One Interface -- for a standalone +system.
+Two Interfaces -- A masquerading +firewall.
+Three Interfaces -- A masquerading firewall with DMZ.
+Samples may be downloaded from ftp://ftp.shorewall.net/pub/shorewall/samples-1.1.17 +
Samples may be downloaded from +ftp://ftp.shorewall.net/pub/shorewall/samples-1.1.17 . See the README file for instructions.
-11/1/2001 - The current version of Shorewall is -1.1.17. I intend this to be the last of the 1.1 Shorewall -releases.
+11/1/2001 - The current version of Shorewall is 1.1.17. +I intend this to be the last of the 1.1 Shorewall releases.
In this version:
The handling of ADD_IP_ALIASES +has been corrected.
+10/22/2001 - The current version of Shorewall is 1.1.16. -In this version:
+10/22/2001 - The current version of Shorewall is 1.1.16. In +this version:
A new "shorewall show connections" +command has been added.
+In the "shorewall monitor" output, +the currently tracked connections are now shown on a separate page.
+Prior to this release, Shorewall unconditionally added the external IP adddress(es) specified in /etc/shorewall/nat. Beginning with version 1.1.16, a new parameter (ADD_IP_ALIASES) may be set to -"no" -(or "No") to inhibit this behavior. This allows IP aliases created +"no" (or "No") to inhibit this behavior. This allows IP aliases created using your distribution's network configuration tools to be used in -static NAT.
10/15/2001 - The current version of Shorewall is 1.1.15. -In this version:
+10/15/2001 - The current version of Shorewall is 1.1.15. In +this version:
Support for nested zones has been +improved. See the documentation +for details
+Shorewall now correctly checks the alternate configuration +directory for the 'zones' file.
+10/4/2001 - The current version of Shorewall is 1.1.14. -In this version
+10/4/2001 - The current version of Shorewall is 1.1.14. In +this version
Shorewall now supports alternate
+configuration directories. When an alternate directory is specified
+when starting or restarting Shorewall (e.g., "shorewall -c
+/etc/testconf restart"), Shorewall will first look for configuration
+files in the alternate directory then in /etc/shorewall. To create an
+alternate configuration simply:
1. Create a New Directory
-2. Copy to that directory any of your configuration files that you
-want to change.
+2. Copy to that directory any of your configuration files that you want
+to change.
3. Modify the copied files as needed.
-4. Restart Shorewall specifying the new directory.
The rules for allowing/disallowing +icmp echo-requests (pings) are now moved after rules created when +processing the rules file. This allows you to add rules that +selectively allow/deny ping based on source or destination address.
+Rules that specify multiple client +ip addresses or subnets no longer cause startup failures.
+Zone names in the policy file are +now validated against the zones file.
+If you have packet mangling support enabled, the "norfc1918" interface option -now -logs and drops any incoming packets on the interface that have an -RFC 1918 destination address.
9/12/2001 - The current version of Shorewall is 1.1.13. -In this version
+9/12/2001 - The current version of Shorewall is 1.1.13. In +this version
Shell variables can now be used to +parameterize Shorewall rules.
+The second column in the hosts file
+may now contain a comma-separated list.
Example:
sea
-eth0:130.252.100.0/24,206.191.149.0/24
Handling of multi-zone interfaces has been improved. See the documentation for the -/etc/shorewall/interfaces file.
8/28/2001 - The current version of Shorewall is 1.1.12. -In this version
+8/28/2001 - The current version of Shorewall is 1.1.12. In +this version
Several columns in the rules file +may now contain comma-separated lists.
+Shorewall is now more rigorous in +parsing the options in /etc/shorewall/interfaces.
+Complementation using "!" is now supported in rules.
+7/28/2001 - The current version of Shorewall is 1.1.11. -In this version
+7/28/2001 - The current version of Shorewall is 1.1.11. In +this version
A "shorewall refresh" command has +been added to allow for refreshing the rules associated with the +broadcast address on a dynamic interface. This command should be used +in place of "shorewall restart" when the internet interface's IP +address changes.
+The /etc/shorewall/start file (if +any) is now processed after all temporary rules have been deleted. This +change prevents the accidental removal of rules added during the +processing of that file.
+The "dhcp" interface option is now +applicable to firewall interfaces used by a DHCP server running on the +firewall.
+The RPM can now be built from the .tgz file using "rpm +-tb"
+7/6/2001 - The current version of Shorewall is 1.1.10. In this version
Shorewall now enables Ipv4 Packet +Forwarding by default. Packet forwarding may be disabled by specifying +IP_FORWARD=Off in /etc/shorewall/shorewall.conf. If you don't want +Shorewall to enable or disable packet forwarding, add +IP_FORWARDING=Keep to your /etc/shorewall/shorewall.conf file.
+The "shorewall hits" command no +longer lists extraneous service names in its last report.
+Erroneous instructions in the comments at the head of the +firewall script have been corrected.
+6/23/2001 - The current version of Shorewall is 1.1.9. In this version
The "tunnels" file really is +in the RPM now.
+SNAT can now be applied to +port-forwarded connections.
+A bug which would cause firewall +start failures in some dhcp configurations has been fixed.
+The firewall script now issues a +message if you have the name of an interface in the second column in an +entry in /etc/shorewall/masq and that interface is not up.
+You can now configure Shorewall so +that it doesn't require the NAT +and/or mangle netfilter modules.
+Thanks to Alex Polishchuk, the +"hits" command from seawall is now in shorewall.
+Support for IPIP tunnels has +been added.
+6/18/2001 - The current version of Shorewall is 1.1.8. In this version
A typo in the sample rules file has +been corrected.
+It is now possible to restrict +masquerading by destination host or +subnet.
+It is now possible to have static NAT +rules applied to packets originating on the firewall itself.
+6/2/2001 - The current version of Shorewall is 1.1.7. In this version
The TOS rules are now deleted when +the firewall is stopped.
+The .rpm will now install regardless +of which version of iptables is installed.
+The .rpm will now install without +iproute2 being installed.
+The documentation has been cleaned +up.
+The sample configuration files included in Shorewall have been +formatted to 80 columns for ease of editing on a VGA console.
+5/25/2001 - The current version of Shorewall is 1.1.6. In this version
Previous versions of Shorewall have +an implementation of Static NAT which violates the principle of least +surprise. NAT only occurs for packets arriving at (DNAT) or send +from (SNAT) the interface named in the INTERFACE column of +/etc/shorewall/nat. Beginning with version 1.1.6, NAT effective +regardless of which interface packets come from or are destined to. To +get compatibility with prior versions, I have added a new "ALL "ALL INTERFACES" column to -/etc/shorewall/nat. By placing "no" or "No" in the new column, -the NAT behavior of prior versions may be retained.
The treatment of IPSEC Tunnels +where the remote gateway is a standalone system has been improved. +Previously, it was necessary to include an additional rule allowing UDP +port 500 traffic to pass through the tunnel. Shorewall will now create +this rule automatically when you place the name of the remote peer's +zone in a new GATEWAY ZONE column in /etc/shorewall/tunnels.
+5/20/2001 - The current version of Shorewall is 1.1.5. In this version
Compressed modules are now loaded. +This requires that you modutils support loading compressed modules.
+You +may now set the Type of Service (TOS) field in packets.
+Corrected rules generated for port redirection (again).
+5/10/2001 - The current version of Shorewall is 1.1.4. In this version
Corrected problem where if +"shorewall start" aborted early (due to kernel configuration errors for +example), superfluous 'sed' error messages were reported.
+Corrected rules generated for port +redirection.
+The order in which iptables kernel modules are loaded has been +corrected (Thanks to Mark Pavlidis).
+4/28/2001 - The current version of Shorewall is 1.1.3. In this version
Correct message issued when Proxy +ARP address added (Thanks to Jason Kirtland).
+/tmp/shorewallpolicy-$$ is now +removed if there is an error while starting the firewall.
+/etc/shorewall/icmp.def and +/etc/shorewall/common.def are now used to define the icmpdef and common +chains unless overridden by the presence of /etc/shorewall/icmpdef or +/etc/shorewall/common.
+In the .lrp, the file +/var/lib/lrpkg/shorwall.conf has been corrected. An extra space after +"/etc/shorwall/policy" has been removed and "/etc/shorwall/rules" has +been added.
+When a sub-shell encounters a fatal +error and has stopped the firewall, it now kills the main shell so that +the main shell will not continue.
+A problem has been corrected where a +sub-shell stopped the firewall and main shell continued resulting in a +perplexing error message referring to "common.so" resulted.
+Previously, placing "-" in the +PORT(S) column in /etc/shorewall/rules resulted in an error message +during start. This has been corrected.
+The first line of "install.sh" has been corrected -- I had +inadvertently deleted the initial "#".
+4/12/2001 - The current version of Shorewall is 1.1.2. In this version
Port redirection now works again.
+The icmpdef and common chains may now be user-defined.
+The firewall no longer fails to +start if "routefilter" is specified for an interface that isn't +started. A warning message is now issued in this case.
+The LRP Version is renamed +"shorwall" for 8,3 MSDOS file system compatibility.
+A couple of LRP-specific problems were corrected.
+4/8/2001 - Shorewall is now affiliated with the Leaf Project 
4/5/2001 - The current version of Shorewall is 1.1.1. In this version:
The common chain is traversed from +INPUT, OUTPUT and FORWARD before logging occurs
+The source has been cleaned up +dramatically
+DHCP DISCOVER packets with RFC1918 source addresses no longer generate log messages. Linux DHCP clients generate such packets and -it's annoying to see them logged.
3/25/2001 - The current version of Shorewall is 1.1.0. In -this version:
+3/25/2001 - The current version of Shorewall is 1.1.0. In this +version:
Log messages now indicate the packet +disposition.
+Error messages have been improved.
+The ability to define zones +consisting of an enumerated set of hosts and/or subnetworks has been +added.
+The zone-to-zone chain matrix is now +sparse so that only those chains that contain meaningful rules are +defined.
+240.0.0.0/4 and 169.254.0.0/16 have +been added to the source subnetworks whose packets are dropped under +the norfc1918 interface option.
+Exits are now provided for executing +an user-defined script when a chain is defined, when the firewall is +initialized, when the firewall is started, when the firewall is stopped +and when the firewall is cleared.
+The Linux kernel's route filtering facility can now be specified +selectively on network interfaces.
+3/19/2001 - The current version of Shorewall is 1.0.4. This version:
Allows user-defined zones. Shorewall +now has only one pre-defined zone (fw) with the remaining zones being +defined in the new configuration file /etc/shorewall/zones. The +/etc/shorewall/zones file released in this version provides behavior +that is compatible with Shorewall 1.0.3.
+Adds the ability to specify logging +in entries in the /etc/shorewall/rules file.
+Correct handling of the icmp-def +chain so that only ICMP packets are sent through the chain.
+Compresses the output of "shorewall monitor" if awk is +installed. Allows the command to work if awk isn't installed (although +it's not pretty).
+3/13/2001 - The current version of Shorewall is 1.0.3. This -is a bug-fix release with no new features.
+3/13/2001 - The current version of Shorewall is 1.0.3. This is +a bug-fix release with no new features.
The PATH variable in the firewall +script now includes /usr/local/bin and /usr/local/sbin.
+DMZ-related chains are now correctly +deleted if the DMZ is deleted.
+The interface OPTIONS for "gw" interfaces are no longer ignored. +
+3/8/2001 - The current version of Shorewall is 1.0.2. It -supports an additional "gw" (gateway) zone for tunnels and it -supports IPSEC tunnels with end-points on the firewall. There is +supports an additional "gw" (gateway) zone for tunnels and +it supports IPSEC tunnels with end-points on the firewall. There is also a .lrp available now.
diff --git a/Shorewall-Website/shorewall_index.htm b/Shorewall-Website/shorewall_index.htm index 0348c0a00..7d06a8e50 100644 --- a/Shorewall-Website/shorewall_index.htm +++ b/Shorewall-Website/shorewall_index.htm @@ -35,12 +35,12 @@ notes and here are the and updates.The current 2.3 Development Release is 2.3.0 -- Here are the release
+ The current 2.3 Development Release is 2.3.1 -- Here are the release
notes and here are the known
+ href="http://shorewall.net/pub/shorewall/2.3/shorewall-2.3.1/known_problems.txt">known
problems and updates.
+ href="http://shorewall.net/pub/shorewall/2.3/shorewall-2.3.1/errata/">updates
GNU Free Documentation License”.
-2005-05-05
+2005-05-15
Introduction @@ -141,7 +141,8 @@ step instructions.
The Documentation Index is a good place to start as is the Site Search in the -frame above. network
+frame above.If so, the documentation on this site