diff --git a/Shorewall-docs/6to4.htm b/Shorewall-docs/6to4.htm deleted file mode 100755 index 6ce05185e..000000000 --- a/Shorewall-docs/6to4.htm +++ /dev/null @@ -1,113 +0,0 @@ - - -
- -6to4 tunneling with Shorewall can be used to connect your IPv6 -network to another IPv6 network over an IPv4 infrastructure
-More information on Linux and IPv6 can be found in the Linux IPv6 HOWTO. -Details on how to setup a 6to4 tunnels are described in the section Setup -of 6to4 tunnels.
-Suppose that we have the following situation:
--
We want systems in the 2002:100:333::/64 subnetwork to -be able to communicate with the systems in the 2002:488:999::/64 -network. This is accomplished through use of the /etc/shorewall/tunnels -file and the "ip" utility for network interface and routing -configuration.
-Unlike GRE and IPIP tunneling, the -/etc/shorewall/policy, /etc/shorewall/interfaces and -/etc/shorewall/zones files are not used. There is no need to declare a -zone to represent the remote IPv6 network. This -remote network is not visible on IPv4 interfaces and to iptables. All -that -is visible on the IPv4 level is an IPv4 stream which contains IPv6 -traffic. Separate IPv6 interfaces and ip6tables rules need to be -defined to handle -this traffic.
-In /etc/shorewall/tunnels on system A, we need the -following:
---- -
-- -TYPE -ZONE -GATEWAY -GATEWAY ZONE -- - -6to4 -net -134.28.54.2 --
This entry in /etc/shorewall/tunnels, opens the firewall so that the -IPv6 encapsulation protocol (41) will be accepted to/from the remote -gateway.
-Use the following commands to setup system A:
--->ip tunnel add tun6to4 mode sit ttl 254 remote 134.28.54.2
-
->ip link set dev tun6to4 up
->ip addr add 3ffe:8280:0:2001::1/64 dev tun6to4
->ip route add 2002:488:999::/64 via 3ffe:8280:0:2001::2
Similarly, in /etc/shorewall/tunnels on system B we have:
---- -
-- -TYPE -ZONE -GATEWAY -GATEWAY ZONE -- - -6to4 -net -206.191.148.9 --
And use the following commands to setup system B:
--->ip tunnel add tun6to4 mode sit ttl 254 remote 206.191.148.9
-
->ip link set dev tun6to4 up
->ip addr add 3ffe:8280:0:2001::2/64 dev tun6to4
->ip route add 2002:100:333::/64 via 3ffe:8280:0:2001::1
On both systems, restart Shorewall and issue the configuration -commands as listed above. The systems in both IPv6 subnetworks can now -talk to each other using IPv6.
-Updated 5/18/2003 - Tom Eastep -
-Copyright © 2001, 2002, 2003Thomas M. Eastep and Eric de Thouars.
-