Significantly improve 'shorewall generate'

git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@3238 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
This commit is contained in:
teastep 2006-01-07 03:43:49 +00:00
parent d81f2ca29e
commit af973cf234

View File

@ -4047,6 +4047,8 @@ setup_accounting() # $1 = Name of accounting file
echo "Setting up Accounting..."
[ $COMMAND = generate ] && save_progress_message "Restoring Accounting..."
strip_file accounting $1
while read action chain source dest proto port sport user ; do
@ -7472,6 +7474,8 @@ setup_blacklist() {
if [ -n "$hosts" -a -f $f ]; then
echo "Setting up Blacklisting..."
[ $COMMAND = restore ] && save_progress_message "Restoring Blacklisting..."
strip_file blacklist $f
createchain blacklst no
@ -7801,6 +7805,8 @@ initialize_netfilter () {
echo "Deleting user chains..."
[ $COMMAND = generate ] && save_progress_message "Deleting user chains..."
exists_INPUT=Yes
exists_OUTPUT=Yes
exists_FORWARD=Yes
@ -7844,10 +7850,11 @@ initialize_netfilter () {
if [ -f $f ]; then
echo "Processing $f ..."
ipset -U :all: :all:
run_ipset -F
run_ipset -X
run_ipset -R < $f
save_progress_message "Restoring IPSETS..."
run_and_save_command "ipset -U :all: :all:"
run_and_save_command "run_ipset -F"
run_and_save_command "run_ipset -X"
run_and_save_command "run_ipset -R < $f"
fi
run_user_exit continue
@ -7888,6 +7895,8 @@ initialize_netfilter () {
if [ -f /var/lib/shorewall/save ]; then
echo "Restoring dynamic rules..."
[ $COMMAND = generate ] && save_progress_message "Restoring dynamic rules..."
if [ -f /var/lib/shorewall/save ]; then
while read target ignore1 ignore2 address rest; do
case $target in
@ -7905,6 +7914,8 @@ initialize_netfilter () {
echo "Creating Interface Chains..."
[ $COMMAND = generate ] && save_progress_message "Creating Interface Chains..."
for interface in $ALL_INTERFACES; do
createchain $(forward_chain $interface) no
run_iptables -A $(forward_chain $interface) $state -j dynamic
@ -7929,6 +7940,8 @@ add_common_rules() {
#
# Populate the smurf chain
#
[ $COMMAND = generate ] && save_progress_message "Restoring SMURF control..."
for address in $broadcasts ; do
[ -n "$SMURF_LOG_LEVEL" ] && log_rule $SMURF_LOG_LEVEL smurfs DROP -s $address
run_iptables -A smurfs $(source_ip_range $address) -j DROP
@ -7973,6 +7986,8 @@ add_common_rules() {
#
# Process Black List
#
[ $COMMAND = generate ] && save_progress_message "Restoring Black List..."
setup_blacklist
#
@ -7984,6 +7999,8 @@ add_common_rules() {
echo "Adding Anti-smurf Rules"
[ $COMMAND = generate ] && save_progress_message "Adding Anti-smurf Jumps..."
for host in $hosts; do
ipsec=${host%^*}
host=${host#*^}
@ -8005,6 +8022,8 @@ add_common_rules() {
echo "Adding rules for DHCP"
[ $COMMAND = generate ] && save_progress_message "Restoring rules for DHCP..."
for interface in $interfaces; do
if [ -n "$BRIDGING" ]; then
is_bridge=$( brctl show $interface 2> /dev/null | grep ^$interface[[:space:]] )
@ -8023,6 +8042,8 @@ add_common_rules() {
if [ -n "$hosts" ]; then
echo "Enabling RFC1918 Filtering"
[ $COMMAND = generate ] && save_progress_message "Restoring RFC1918 Filtering..."
strip_file rfc1918
createchain norfc1918 no
@ -8114,6 +8135,8 @@ add_common_rules() {
if [ -n "$hosts" ]; then
echo "Setting up TCP Flags checking..."
[ $COMMAND = generate ] && save_progress_message "Restoring TCP Flags checking..."
createchain tcpflags no
if [ -n "$TCP_FLAGS_LOG_LEVEL" ]; then
@ -8280,6 +8303,8 @@ add_common_rules() {
if [ -n "$interfaces" ]; then
echo "Setting up Accept Source Routing..."
save_progress_message "Restoring Source Routing..."
for interface in $interfaces; do
file=/proc/sys/net/ipv4/conf/$interface/accept_source_route
if [ -f $file ]; then
@ -8299,6 +8324,8 @@ add_common_rules() {
if [ -n "$interfaces" ]; then
echo "Setting up UPnP..."
[ $COMMAND = generate ] && save_progress_message "Restoring UPnP..."
createnatchain UPnP
for interface in $interfaces; do
@ -8739,8 +8766,10 @@ define_firewall() # $1 = Command (Start or Restart)
echo "Activating Rules..."; activate_rules
[ -n "$ALIASES_TO_ADD" ] && \
echo "Adding IP Addresses..." && add_ip_aliases
if [ -n "$ALIASES_TO_ADD" ]; then
echo "Adding IP Addresses..."
add_ip_aliases
fi
for file in chains nat proxyarp zones; do
append_file $file
@ -8885,7 +8914,9 @@ generate_firewall() # $1 = File Name
save_load_kernel_modules
echo "Initializing..."; initialize_netfilter
echo "Initializing..."
save_progress_message "Initializing..."
initialize_netfilter
echo "Compiling Proxy ARP"; setup_proxy_arp
#
@ -8904,30 +8935,58 @@ generate_firewall() # $1 = File Name
setup_ipsec
maclist_hosts=$(find_hosts_by_option maclist)
[ -n "$maclist_hosts" ] && setup_mac_lists
echo "Compiling $(find_file rules)..."; process_rules
if [ -n "$maclist_hosts" ]; then
save_progress_message "Restoring MAC Filtration..."
setup_mac_lists
fi
echo "Compiling $(find_file rules)..."
save_progress_message "Restoring Rules..."
process_rules
tunnels=$(find_file tunnels)
[ -f $tunnels ] && \
echo "Compiling $tunnels..." && setup_tunnels $tunnels
if [ -f $tunnels ]; then
echo "Compiling $tunnels..."
save_progress_message "Restoring Tunnels..."
setup_tunnels $tunnels
fi
save_progress_message "Restoring Actions..."
echo "Compiling Actions..."; process_actions2
process_actions3
save_progress_message "Applying Policies..."
echo "Compiling $(find_file policy)..."; apply_policy_rules
masq=$(find_file masq)
[ -f $masq ] && setup_masq $masq
if [ -f $masq ]; then
save_progress_message "Restoring Masquerading/SNAT..."
setup_masq $masq
fi
tos=$(find_file tos)
[ -f $tos ] && [ -n "$MANGLE_ENABLED" ] && process_tos $tos
if [ -f $tos -a -n "$MANGLE_ENABLED" ]; then
save_progress_message "Restoring TOS..."
process_tos $tos
fi
ecn=$(find_file ecn)
[ -f $ecn ] && [ -n "$MANGLE_ENABLED" ] && setup_ecn $ecn
if [ -f $ecn -a -n "$MANGLE_ENABLED" ]; then
save_progress_message "Restoring ECN..."
setup_ecn $ecn
fi
[ -n "$MANGLE_ENABLED" ] && setup_tc
if [ -n "$MANGLE_ENABLED" ]; then
save_progress_message "Restoring TC Rules..."
setup_tc
fi
echo "Compiling Rule Activation..."; activate_rules
echo "Compiling Rule Activation..."
save_progress_message "Activating Rules..."
activate_rules
[ -n "$ALIASES_TO_ADD" ] && \
echo "Adding IP Addresses..." && add_ip_aliases