Correct typo that cases restart failure.

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/INSTALL

@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 4
+Shoreline Firewall (Shorewall) Version 5
 -----         ----
 
 -----------------------------------------------------------------------------

Shorewall-core/configure

@@ -28,7 +28,7 @@
 #
 # Build updates this
 #
-VERSION=4.5.2.1
+VERSION=4.6.12
 
 case "$BASH_VERSION" in
     [4-9].*)
@@ -91,6 +91,8 @@ for p in $@; do
     fi
 done
 
+cd $(dirname $0)
+
 vendor=${params[HOST]}
 
 if [ -z "$vendor" ]; then
@@ -102,7 +104,7 @@ if [ -z "$vendor" ]; then
 		vendor=redhat
 		;;
 	    debian|ubuntu)
-		ls -l /sbin/init |fgrep -q systemd | vendor=debian.systemd | vendor=debian.sysvinit
+		vendor=debian
 		;;
 	    opensuse)
 		vendor=suse
@@ -122,7 +124,6 @@ if [ -z "$vendor" ]; then
 	    params[HOST]=apple
 	    rcfile=shorewallrc.apple
 	    ;;
-
 	cygwin*|CYGWIN*)
 	    params[HOST]=cygwin
 	    rcfile=shorewallrc.cygwin
@@ -130,7 +131,7 @@ if [ -z "$vendor" ]; then
 	*)
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
-		rcfile=shorewallrc.debian.sysvinit
+		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -143,28 +144,41 @@ if [ -z "$vendor" ]; then
 	    elif [ -f /etc/arch-release ] ; then
 		params[HOST]=archlinux
 		rcfile=shorewallrc.archlinux
+	    elif [ -f /etc/openwrt_release ]; then
+		params[HOST]=openwrt
+		rcfile=shorewallrc.openwrt
 	    else
 		params[HOST]=linux
 		rcfile=shorewallrc.default
 	    fi
 	    ;;
     esac
-
     vendor=${params[HOST]}
-elif [ $vendor = linux ]; then
-    rcfile=shorewallrc.default;
 else
-    rcfile=shorewallrc.$vendor
+    if [ $vendor = linux ]; then
+	rcfile=shorewallrc.default;
+    elif [ $vendor = debian -a -f /etc/debian_version ]; then
+	ls -l /sbin/init | fgrep -q systemd && rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+    else
+	rcfile=shorewallrc.$vendor
+    fi
+
     if [ ! -f $rcfile ]; then
 	echo "ERROR: $vendor is not a recognized host type" >&2
 	exit 1
+    elif [ $vendor = default ]; then
+	params[HOST]=linux
+	vendor=linux
+    elif [[ $vendor == debian.* ]]; then
+	params[HOST]=debian
+	vendor=debian
     fi
 fi
 
 if [ $vendor = linux ]; then
     echo "INFO: Creating a generic Linux installation - " `date`;
 else
-    echo "INFO: Creating a ${vendor}-specific installation - " `date`;
+    echo "INFO: Creating a ${params[HOST]}-specific installation - " `date`;
 fi
 
 echo
@@ -177,6 +191,7 @@ done
 
 echo '#'                                                                 > shorewallrc
 echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
+echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 
 if [ $# -gt 0 ]; then

Shorewall-core/configure.pl

@@ -31,7 +31,7 @@ use strict;
 # Build updates this
 #
 use constant {
-    VERSION => '4.5.2.1'
+    VERSION => '4.6.12'
 };
 
 my %params;
@@ -52,6 +52,9 @@ for ( @ARGV ) {
     $params{$pn} = $pv;
 }
 
+use File::Basename;
+chdir dirname($0);
+
 my $vendor = $params{HOST};
 my $rcfile;
 my $rcfilename;
@@ -81,12 +84,39 @@ unless ( defined $vendor ) {
 }
 
 if ( defined $vendor ) {
-    $rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
+    if ( $vendor eq 'debian' && -f '/etc/debian_version' ) {
-    die qq("ERROR: $vendor" is not a recognized host type) unless -f $rcfilename;
+	if ( -l '/sbin/init' ) {
+	    if ( readlink('/sbin/init') =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
+    } else {
+	$rcfilename = $vendor eq 'linux' ? 'shorewallrc.default' : 'shorewallrc.' . $vendor;
+    }
+
+    unless ( -f $rcfilename ) {
+	die qq("ERROR: $vendor" is not a recognized host type);
+    } elsif ( $vendor eq 'default' ) {
+	$params{HOST} = $vendor = 'linux';
+    } elsif ( $vendor =~ /^debian\./ ) {
+	$params{HOST} = $vendor = 'debian';
+    }
 } else {
     if ( -f '/etc/debian_version' ) {
 	$vendor = 'debian';
-	$rcfilename = 'shorewallrc.debian.sysvinit';
+	if ( -l '/sbin/init' ) {
+	    if ( readlink( '/sbin/init' ) =~ /systemd/ ) {
+		$rcfilename = 'shorewallrc.debian.systemd';
+	    } else {
+		$rcfilename = 'shorewallrc.debian.sysvinit';
+	    }
+	} else {
+	    $rcfilename = 'shorewallrc.debian.sysvinit';
+	}
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -143,7 +173,8 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n#\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;
 

Shorewall-core/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -24,6 +24,9 @@
 
 VERSION=xxx #The Build script inserts the actual version
 
+PRODUCT=shorewall-core
+Product="Shorewall Core"
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -66,15 +69,6 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
@@ -88,7 +82,20 @@ delete_file() # $1 = file to delete
 
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
 }
 
 require()
@@ -96,6 +103,9 @@ require()
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
+#
+# Change to the directory containing this script
+#
 cd "$(dirname $0)"
 
 #
@@ -181,10 +191,6 @@ done
 
 [ "${INITFILE}" != 'none/' ] && require INITSOURCE && require INITDIR
 
-T="-T"
-
-INSTALLD='-D'
-
 if [ -z "$BUILD" ]; then
     case $(uname) in
 	cygwin*|CYGWIN*)
@@ -226,6 +232,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=suse
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ] ; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -252,17 +260,15 @@ case $BUILD in
 
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
-	INSTALLD=
-	T=
 	;;
     *)
-	[ -z "$OWNER" ] && OWNER=root
+	if [ $(id -u) -eq 0 ]; then
-	[ -z "$GROUP" ] && GROUP=root
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
-
 #
 # Determine where to install the firewall script
 #
@@ -276,7 +282,7 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
 	echo "ERROR: Unknown HOST \"$HOST\"" >&2
@@ -305,7 +311,6 @@ if [ -n "$DESTDIR" ]; then
     if [ $BUILD != cygwin ]; then
 	if [ `id -u` != 0 ] ; then
 	    echo "Not setting file owner/group permissions, not running as root."
-	    OWNERSHIP=""
 	fi
     fi
 fi
@@ -341,8 +346,10 @@ fi
 mkdir -p ${DESTDIR}${SBINDIR}
 chmod 755 ${DESTDIR}${SBINDIR}
 
-mkdir -p ${DESTDIR}${MANDIR}
+if [ -n "${MANDIR}" ]; then
-chmod 755 ${DESTDIR}${MANDIR}
+    mkdir -p ${DESTDIR}${MANDIR}
+    chmod 755 ${DESTDIR}${MANDIR}
+fi
 
 if [ -n "${INITFILE}" ]; then
     mkdir -p ${DESTDIR}${INITDIR}
@@ -407,9 +414,9 @@ fi
 if [ ${SHAREDIR} != /usr/share ]; then
     for f in lib.*; do
 	if [ $BUILD != apple ]; then
-	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
+	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
 	else
-	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/shorewall/$f
+	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
 	fi
     done
 fi

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 4.5 -- /usr/share/shorewall/lib.base
+# Shorewall 5.0 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 4.5 -- /usr/share/shorewall/lib.common.
+# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -33,7 +33,7 @@ startup_error() # $* = Error Message
     echo "   ERROR: $@: Firewall state not changed" >&2
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%_b %d %T') "
+        timestamp="$(date +'%b %d %T') "
         echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
     fi
 
@@ -50,7 +50,7 @@ startup_error() # $* = Error Message
     esac
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%_b %d %T') "
+        timestamp="$(date +'%b %d %T') "
 
 	case $COMMAND in
 	    start)
@@ -71,108 +71,35 @@ startup_error() # $* = Error Message
 }
 
 #
-# Get the Shorewall version of the passed script
+# Create the required option string and run the passed script using
-#
-get_script_version() { # $1 = script
-    local temp
-    local version
-    local ifs
-    local digits
-    local verbosity
-
-    if [ -z "$WORKAROUNDS" -o "$g_compiled" = "$g_file" ]; then
-	#
-	# Unless WORKAROUNDS=No, either this script was just compiled or AUTOMAKE
-	# determined that re-compilation wasn't needed
-	#
-	temp="$SHOREWALL_VERSION"
-    else
-	verbosity="$VERBOSITY"
-	VERBOSITY=0
-
-	temp=$( $SHOREWALL_SHELL $1 version | tail -n 1 )
-    fi
-
-    if [ -z "$temp" ]; then
-	version=0
-    else
-	temp=${temp%-*}
-	ifs=$IFS
-	IFS=.
-	temp=$(echo $temp)
-	IFS=$ifs
-	digits=0
-
-	for temp in $temp; do
-	    version=${version}$(printf '%02d' $temp)
-	    digits=$(($digits + 1))
-	    [ $digits -eq 3 ] && break
-	done
-    fi
-
-    echo $version
-
-    VERBOSITY="$verbosity"
-}
-
-#
-# Do required exports or create the required option string and run the passed script using
 # $SHOREWALL_SHELL
 #
 run_it() {
     local script
     local options
-    local version
 
     export VARDIR
 
     script=$1
     shift
 
-    version=$(get_script_version $script)
+    if [ x$1 = xtrace -o x$1 = xdebug ]; then
-
+	options="$1 -"
-    if [ $version -lt 040408 ]; then
+	shift;
-	#
-	# Old script that doesn't understand 4.4.8 script options
-	#
-	export RESTOREFILE
-	export VERBOSITY
-	export NOROUTES=$g_noroutes
-	export PURGE=$g_purge
-	export TIMESTAMP=$g_timestamp
-	export RECOVERING=$g_recovering
-
-	case "$g_program" in
-	    *-lite)
-		#
-		# Shorewall Lite
-		#
-		export LOGFORMAT
-		export IPTABLES
-		;;
-	esac
     else
-	#
+	options='-'
-	# 4.4.8 or later -- no additional exports required
-	#
-	if [ x$1 = xtrace -o x$1 = xdebug ]; then
-	    options="$1 -"
-	    shift;
-	else
-	    options='-'
-	fi
-
-	[ -n "$g_noroutes" ]   && options=${options}n
-	[ -n "$g_timestamp" ]  && options=${options}t
-	[ -n "$g_purge" ]      && options=${options}p
-	[ -n "$g_recovering" ] && options=${options}r
-	[ -n "$g_counters" ]   && options=${options}c
-
-	options="${options}V $VERBOSITY"
-
-	[ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
     fi
 
+    [ -n "$g_noroutes" ]   && options=${options}n
+    [ -n "$g_timestamp" ]  && options=${options}t
+    [ -n "$g_purge" ]      && options=${options}p
+    [ -n "$g_recovering" ] && options=${options}r
+    [ -n "$g_counters" ]   && options=${options}c
+
+    options="${options}V $VERBOSITY"
+
+    [ -n "$RESTOREFILE" ] && options="${options} -R $RESTOREFILE"
+
     $SHOREWALL_SHELL $script $options $@
 }
 
@@ -389,6 +316,7 @@ reload_kernel_modules() {
     local moduleloader
     moduleloader=modprobe
     local uname
+    local extras
 
     if ! qt mywhich modprobe; then
 	moduleloader=insmod
@@ -396,9 +324,25 @@ reload_kernel_modules() {
 
     [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
 
-    [ -z "$MODULESDIR" ] && \
+    if [ -n "$MODULESDIR" ]; then
-	uname=$(uname -r) && \
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
 
     [ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
 
@@ -428,6 +372,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
     local savemoduleinfo
     savemoduleinfo=${1:-Yes} # So old compiled scripts still work
     local uname
+    local extras
 
     if ! qt mywhich modprobe; then
 	moduleloader=insmod
@@ -435,9 +380,25 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 
     [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
 
-    [ -z "$MODULESDIR" ] && \
+    if [ -n "$MODULESDIR" ]; then
-	uname=$(uname -r) && \
+	case "$MODULESDIR" in
+	    +*)
+		extras="$MODULESDIR"
+		extras=${extras#+}
+		MODULESDIR=
+		;;
+	esac
+    fi
+
+    if [ -z "$MODULESDIR" ]; then
+	uname=$(uname -r)
 	MODULESDIR=/lib/modules/$uname/kernel/net/ipv${g_family}/netfilter:/lib/modules/$uname/kernel/net/netfilter:/lib/modules/$uname/kernel/net/sched:/lib/modules/$uname/extra:/lib/modules/$uname/extra/ipset
+	if [ -n "$extras" ]; then
+	    for directory in $(split "$extras"); do
+		MODULESDIR="$MODULESDIR:/lib/modules/$uname/$directory"
+	    done
+	fi
+    fi
 
     for directory in $(split $MODULESDIR); do
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
@@ -572,9 +533,9 @@ in_network() # $1 = IP address, $2 = CIDR network
 #
 # Query NetFilter about the existence of a filter chain
 #
-chain_exists() # $1 = chain name
+chain_exists() # $1 = chain name, $2 = table name (optional)
 {
-    qt1 $g_tool -L $1 -n
+    qt1 $g_tool -t ${2:-filter} -L $1 -n
 }
 
 #
@@ -782,12 +743,15 @@ mutex_on()
     local lockf
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
+    local lockd
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
     if [ $MUTEX_TIMEOUT -gt 0 ]; then
 
-	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}
+	lockd=$(dirname $LOCKFILE)
+
+	[ -d "$lockd" ] || mkdir -p "$lockd"
 
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
@@ -807,6 +771,11 @@ mutex_on()
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
+	elif qt mywhich lock; then
+            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
+            chmod u+w ${lockf}
+            echo $$ > ${lockf}
+            chmod u-w ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 4.5 rc file
+# Apple OS X Shorewall 5.0 rc file
 #
 BUILD=apple
 HOST=apple

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 4.5 rc file
+# Arch Linux Shorewall 5.0 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 4.5 rc file
+# Cygwin Shorewall 5.0 rc file
 #
 BUILD=cygwin
 HOST=cygwin

Shorewall-core/shorewallrc.debian.systemd

@@ -15,7 +15,7 @@ INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
 ANNOTATED=				#If non-zero, annotated configuration files are installed
 SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR

Shorewall-core/shorewallrc.default

@@ -1,5 +1,5 @@
 #
-# Default Shorewall 4.5 rc file
+# Default Shorewall 5.0 rc file
 #
 HOST=linux                              #Generic Linux
 BUILD=                                  #Default is to detect the build system

Shorewall-core/shorewallrc.openwrt

@@ -0,0 +1,23 @@
+#
+# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
+#
+# Input: host=openwrt
+#
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=                                 #Directory where manpages are installed.
+INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.openwrt.sh              #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SYSCONFDIR=${CONFDIR}/sysconfig         #Directory where SysV init parameter files are installed
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/lib                             #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 4.5 rc file
+# RedHat/FedoraShorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 4.5 rc file
+# Slackware Shorewall 5.0 rc file
 #
 BUILD=slackware
 HOST=slackware

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 4.5 rc file
+# SuSE Shorewall 5.0 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse

Shorewall-core/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://www.shorewall.net
 #
@@ -27,7 +27,9 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx #The Build script inserts the actual version
-
+PRODUCT="shorewall-core"
+Product="Shorewall Core"
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -66,6 +68,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 #
 # Read the RC file
 #

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall-init/init.openwrt.sh

@@ -0,0 +1,131 @@
+#!/bin/sh /etc/rc.common
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#
+#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
+#
+#       On most distributions, this file should be called /etc/init.d/shorewall-init.
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       You should have received a copy of the GNU General Public License
+#       along with this program; if not, write to the Free Software
+#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#
+
+# arg1 of init script is arg2 when rc.common is sourced
+
+case "$action" in
+  start|stop|boot)
+      if [ "$(id -u)" != "0" ]
+      then
+	  echo "You must be root to start, stop or restart \"Shorewall \"."
+	  exit 1
+      fi
+
+      # check if shorewall-init is configured or not
+      if [ -f "/etc/sysconfig/shorewall-init" ]
+      then
+	  . /etc/sysconfig/shorewall-init
+	  if [ -z "$PRODUCTS" ]
+	  then
+	      exit 0
+	  fi
+      else
+	  exit 0
+      fi
+
+      ;;
+  enable|disable|enabled)
+      # Openwrt related
+      # start and stop runlevel variable
+      START=19
+      STOP=91
+      ;;
+  *)
+      echo "Usage: /etc/init.d/shorewall-init {start|stop}"
+      exit 1
+esac
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+# Locate the current PRODUCT's statedir
+setstatedir() {
+    local statedir
+    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+	statedir=$( . ${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+    fi
+
+    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
+    else
+	return 0
+    fi
+}
+
+# Initialize the firewall
+start () {
+    local PRODUCT
+  local STATEDIR
+
+  echo -n "Initializing \"Shorewall-based firewalls\": "
+  for PRODUCT in $PRODUCTS; do
+      if setstatedir; then
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
+	  fi
+      fi
+  done
+
+  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+      ipset -R < "$SAVE_IPSETS"
+  fi
+}
+
+boot () {
+    start
+}
+
+# Clear the firewall
+stop () {
+    local PRODUCT
+    local STATEDIR
+
+    echo -n "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	fi
+    fi
+}
+

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -38,7 +38,7 @@
 # 0 - success
 # 1 - generic or unspecified error
 # 2 - invalid or excess argument(s)
-# 3 - unimplemented feature (e.g. "reload")
+# 3 - unimplemented feature
 # 4 - insufficient privilege
 # 5 - program is not installed
 # 6 - program is not configured

Shorewall-init/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Init
 #
-#     (c) 2000-20114 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2010 - Roberto C. Sanchez (roberto@connexer.com)
 #
 #       Shorewall documentation is available at http://shorewall.net
@@ -28,6 +28,8 @@
 #
 
 VERSION=xxx #The Build script inserts the actual version.
+PRODUCT=shorewall-init
+Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -71,39 +73,50 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
     echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
 }
 
+install_file() # $1 = source $2 = target $3 = mode
+{
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 0755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
 require() 
 {
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
-install_file() # $1 = source $2 = target $3 = mode
+#
-{
+# Change to the directory containing this script
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+#
-}
-
 cd "$(dirname $0)"
 
-PRODUCT=shorewall-init
-
 #
 # Parse the run line
 #
-T='-T'
 
 finished=0
 configure=1
@@ -230,6 +243,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -237,22 +252,24 @@ if [ -z "$BUILD" ]; then
     esac
 fi
 
-[ -n "$OWNER" ] || OWNER=$(id -un)
-[ -n "$GROUP" ] || GROUP=$(id -gn)
-
 case $BUILD in
     apple)
-	T=
+	[ -z "$OWNER" ] && OWNER=root
-	;;
+	[ -z "$GROUP" ] && GROUP=wheel
-    debian|gentoo|redhat|suse|slackware|archlinux)
 	;;
+    cygwin*|CYGWIN*)
+	OWNER=$(id -un)
+	GROUP=$(id -gn)
+ 	;;
     *)
-	[ -n "$BUILD" ] && echo "ERROR: Unknown BUILD environment ($BUILD)" >&2 || echo "ERROR: Unknown BUILD environment"
+	if [ $(id -u) -eq 0 ]; then
-	exit 1
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -277,6 +294,9 @@ case "$HOST" in
     suse)
 	echo "Installing SuSE-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing Openwrt-specific configuration..."
+	;;
     linux)
 	echo "ERROR: Shorewall-init is not supported on this system" >&2
 	exit 1
@@ -290,12 +310,12 @@ esac
 [ -z "$TARGET" ] && TARGET=$HOST
 
 if [ -n "$DESTDIR" ]; then
-    if [ `id -u` != 0 ] ; then
+    if [ $(id -u) != 0 ] ; then
 	echo "Not setting file owner/group permissions, not running as root."
 	OWNERSHIP=""
     fi
     
-    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+    make_directory ${DESTDIR}${INITDIR} 0755
 fi
 
 echo "Installing Shorewall Init Version $VERSION"
@@ -311,7 +331,7 @@ fi
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
 fi
 
 #
@@ -339,14 +359,14 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
     if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
-        chmod 755 ${DESTDIR}${SBINDIR}
+        chmod 0755 ${DESTDIR}${SBINDIR}
     fi
-    run_install $OWNERSHIP -m 700 shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init
+    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
     echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
@@ -355,13 +375,13 @@ fi
 # Create /usr/share/shorewall-init if needed
 #
 mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
-chmod 755 ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
 
 #
 # Install logrotate file
 #
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -369,7 +389,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
-chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 
 #
 # Remove and create the symbolic link to the init script
@@ -397,6 +417,7 @@ if [ $HOST = debian ]; then
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
 	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
@@ -411,6 +432,9 @@ else
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
+	    elif [ $HOST = openwrt ]; then
+		# Not implemented on openwrt
+		/bin/true
 	    else
 		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
@@ -418,8 +442,8 @@ else
     fi
 
     if [ -n "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-	run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
+	install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT 0644
-	echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     [ $HOST = suse ] && IFUPDOWN=ifupdown.suse.sh || IFUPDOWN=ifupdown.fedora.sh
@@ -429,13 +453,15 @@ fi
 # Install the ifupdown script
 #
 
-cp $IFUPDOWN ifupdown
+if [ $HOST != openwrt ]; then
+    cp $IFUPDOWN ifupdown
 
-[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
+    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 
-install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
     [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
@@ -488,9 +514,13 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ $configure -eq 1 -a -n "$first_install" ]; then
+    if [ $configure -eq 1 -a -n "first_install" ]; then
 	if [ $HOST = debian ]; then
-	    if mywhich insserv; then
+	    if [ -n "$SERVICEDIR" ]; then
+		if systemctl enable ${PRODUCT}.service; then
+                    echo "Shorewall Init will start automatically at boot"
+		fi
+	    elif mywhich insserv; then
 		if insserv ${INITDIR}/shorewall-init; then
 		    echo "Shorewall Init will start automatically at boot"
 		else
@@ -506,6 +536,13 @@ if [ -z "$DESTDIR" ]; then
 	    else
 		cant_autostart
 	    fi
+	elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	    /etc/init.d/$PRODUCT enable
+	    if /etc/init.d/$PRODUCT enabled; then
+		echo "$Product will start automatically at boot"
+	    else
+		cant_autostart
+	    fi
 	elif [ $HOST = gentoo ]; then
 	    # On Gentoo, a service must be enabled manually by the user,
 	    # not by the installer
@@ -534,6 +571,13 @@ if [ -z "$DESTDIR" ]; then
 		else
 		    cant_autostart
 		fi
+	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+		/etc/init.d/shorewall-inir enable
+		if /etc/init.d/shorewall-init enabled; then
+		    echo "Shorrewall Init will start automatically at boot"
+		else
+		    cant_autostart
+		fi
 	    else
 		cant_autostart
 	    fi
@@ -554,7 +598,7 @@ fi
 
 [ -z "${DESTDIR}" ] && [ ! -f ~/.shorewallrc ] && cp ${SHAREDIR}/shorewall/shorewallrc .
 
-if [ -f ${DESTDIR}/etc/ppp ]; then
+if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do

Shorewall-init/shorewall-init

@@ -1,5 +1,5 @@
 #!/bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.6
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-init/shorewall-init.service

@@ -5,7 +5,8 @@
 #
 [Unit]
 Description=Shorewall firewall (bootup security)
-Before=network.target
+Before=network-pre.target
+Wants=network-pre.target
 
 [Service]
 Type=oneshot

Shorewall-init/shorewall-init.service.214

@@ -1,20 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/shorewall-init.service.214.debian

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
-#
-[Unit]
-Description=Shorewall firewall (bootup security)
-Before=network-pre.target
-Wants=network-pre.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/default/shorewall-init
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-init start
-ExecStop=/sbin/shorewall-init stop
-
-[Install]
-WantedBy=basic.target

Shorewall-init/shorewall-init.service.debian

@@ -6,7 +6,6 @@
 #
 [Unit]
 Description=Shorewall firewall (bootup security)
-Wants=network.target
 Before=network.target
 
 [Service]

Shorewall-init/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
@@ -27,6 +27,8 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-init
+Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -75,6 +77,11 @@ remove_file() # $1 = file to restore
     fi
 }
 
+#
+# Change to the directory containing this script
+#
+cd "$(dirname $0)"
+
 finished=0
 configure=1
 
@@ -162,7 +169,11 @@ INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich updaterc.d ; then
+	if [ $HOST = openwrt ]; then
+	    if /etc/init.d/shorewall-init enabled; then
+		/etc/init.d/shorewall-init disable
+	    fi
+	elif mywhich updaterc.d ; then
 	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
             insserv -r $INITSCRIPT
@@ -174,13 +185,22 @@ if [ -f "$INITSCRIPT" ]; then
     remove_file $INITSCRIPT
 fi
 
-if [ -n "$SYSTEMD" ]; then
+if [ -z "${SERVICEDIR}" ]; then
-    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    SERVICEDIR="$SYSTEMD"
-    rm -f $SYSTEMD/shorewall-init.service
 fi
 
-[ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+if [ -n "$SERVICEDIR" ]; then
-[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SERVICEDIR/shorewall-init.service
+fi
+
+if [ $HOST = openwrt ]; then
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+else
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
+fi
 
 remove_file ${CONFDIR}/default/shorewall-init
 remove_file ${CONFDIR}/sysconfig/shorewall-init
@@ -194,16 +214,16 @@ remove_file ${CONFDIR}/network/if-post-down.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-up.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-down.d/shorewall
 
-[ -n "$SYSTEMD" ] && remove_file ${SYSTEMD}/shorewall.service
-
 if [ -d ${CONFDIR}/ppp ]; then
     for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
 	remove_file ${CONFDIR}/ppp/$directory/shorewall
     done
 
     for file in if-up.local if-down.local; do
-	if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+	if [ -f ${CONFDIR}/ppp/$file ]; then
-	    remove_file ${CONFDIR}/ppp/$FILE
+	    if grep -qF Shorewall-based ${CONFDIR}/ppp/$FILE; then
+		remove_file ${CONFDIR}/ppp/$FILE
+	    fi
 	fi
     done
 fi

Shorewall-lite/configpath

@@ -1,5 +1,5 @@
 #
-# Shorewall Lite version 4.1 - Default Config Path
+# Shorewall Lite version 5 - Default Config Path
 #
 # /usr/share/shorewall-lite/configpath
 #

Shorewall-lite/init.openwrt.sh

@@ -0,0 +1,94 @@
+#!/bin/sh /etc/rc.common
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
+#
+#	On most distributions, this file should be called /etc/init.d/shorewall.
+#
+#	Complete documentation is available at http://shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#	If an error occurs while starting or restarting the firewall, the
+#	firewall is automatically stopped.
+#
+#	Commands are:
+#
+#	   shorewall-lite start			  Starts the firewall
+#	   shorewall-lite restart		  Restarts the firewall
+#	   shorewall-lite reload		  Reload the firewall
+#	   shorewall-lite stop			  Stops the firewall
+#	   shorewall-lite status		  Displays firewall status
+#
+
+# description: Packet filtering firewall
+
+# Openwrt related
+# Start and stop runlevel variable
+START=50
+STOP=89
+# Displays the status command
+EXTRA_COMMANDS="status"
+EXTRA_HELP=" status Displays firewall status"
+
+################################################################################
+# Get startup options (override default)
+################################################################################
+OPTIONS=
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
+    . ${SYSCONFDIR}/shorewall-lite
+fi
+
+SHOREWALL_INIT_SCRIPT=1
+
+################################################################################
+# E X E C U T I O N    B E G I N S   H E R E				       #
+################################################################################
+# Arg1 of init script is arg2 when rc.common is sourced; set to action variable
+command="$action"
+
+start() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STARTOPTIONS
+}
+
+boot() {
+	local command="start"
+	start
+}
+
+restart() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RESTARTOPTIONS
+}
+
+reload() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RELOADOPTION
+}
+
+stop() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STOPOPTIONS
+}
+
+status() {
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $@
+}

Shorewall-lite/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Lite
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -67,15 +67,6 @@ mywhich() {
     return 2
 }
 
-run_install()
-{
-    if ! install $*; then
-	echo
-	echo "ERROR: Failed to install $*" >&2
-	exit 1
-    fi
-}
-
 cant_autostart()
 {
     echo
@@ -89,7 +80,28 @@ delete_file() # $1 = file to delete
 
 install_file() # $1 = source $2 = target $3 = mode
 {
-    run_install $T $OWNERSHIP -m $3 $1 ${2}
+    if cp -f $1 $2; then
+	if chmod $3 $2; then
+	    if [ -n "$OWNER" ]; then
+		if chown $OWNER:$GROUP $2; then
+		    return
+		fi
+	    else
+		return 0
+	    fi
+	fi
+    fi
+
+    echo "ERROR: Failed to install $2" >&2
+    exit 1
+}
+
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+
 }
 
 require()
@@ -187,7 +199,7 @@ elif [ -z "${VARDIR}" ]; then
     VARDIR=${VARLIB}/${PRODUCT}
 fi
 
-for var in SHAREDIR LIBEXECDIRDIRDIR CONFDIR SBINDIR VARLIB VARDIR; do
+for var in SHAREDIR LIBEXECDIR CONFDIR SBINDIR VARLIB VARDIR; do
     require $var
 done
 
@@ -201,8 +213,6 @@ PATH=${SBINDIR}:/bin:/usr${SBINDIR}:/usr/bin:/usr/local/bin:/usr/local${SBINDIR}
 # Determine where to install the firewall script
 #
 cygwin=
-INSTALLD='-D'
-T='-T'
 
 if [ -z "$BUILD" ]; then
     case $(uname) in
@@ -245,6 +255,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f ${CONFDIR}/arch-release ] ; then
 		BUILD=archlinux
+	    elif [ -f ${CONFDIR}/openwrt_release ]; then
+		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -260,16 +272,16 @@ case $BUILD in
     apple)
 	[ -z "$OWNER" ] && OWNER=root
 	[ -z "$GROUP" ] && GROUP=wheel
-	INSTALLD=
-	T=
 	;;
     *)
-	[ -z "$OWNER" ] && OWNER=root
+	if [ $(id -u) -eq 0 ]; then
-	[ -z "$GROUP" ] && GROUP=root
+	    [ -z "$OWNER" ] && OWNER=root
+	    [ -z "$GROUP" ] && GROUP=root
+	fi
 	;;
 esac
 
-OWNERSHIP="-o $OWNER -g $GROUP"
+[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -300,6 +312,9 @@ case "$HOST" in
     suse)
 	echo "Installing Suse-specific configuration..."
 	;;
+    openwrt)
+	echo "Installing OpenWRT-specific configuration..."
+	;;
     linux)
 	;;
     *)
@@ -316,8 +331,9 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
-    install -d $OWNERSHIP -m 755 ${DESTDIR}/${SBINDIR}
+    make_directory ${DESTDIR}${SBINDIR} 755
-    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+    make_directory ${DESTDIR}${INITDIR} 755
+
 else
     if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
 	echo "$PRODUCT $VERSION requires Shorewall Core which does not appear to be installed" >&2
@@ -357,7 +373,7 @@ fi
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
 install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
-[ -n "${INITFILE}" ] && install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
+[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
 
 echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
@@ -399,7 +415,7 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -421,9 +437,9 @@ fi
 #
 # Install the  Makefile
 #
-run_install $OWNERSHIP -m 0600 Makefile ${DESTDIR}${CONFDIR}/$PRODUCT
+install_file Makefile ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile 0600
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
-[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}/${CONFDIR}/$PRODUCT/Makefile
+[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
 echo "Makefile installed as ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile"
 
 #
@@ -438,7 +454,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 for f in lib.* ; do
     if [ -f $f ]; then
 	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Library ${f#*.} file installed as ${DESTDIR}/${SHAREDIR}/$PRODUCT/$f"
+	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
     fi
 done
 
@@ -451,7 +467,7 @@ echo "Common functions linked through ${DESTDIR}${SHAREDIR}/$PRODUCT/functions"
 #
 
 install_file shorecap ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${LIBEXECDIR}/$PRODUCT/shorecap
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap
 
 echo
 echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shorecap"
@@ -461,17 +477,17 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 #
 
 if [ -f modules ]; then
-    run_install $OWNERSHIP -m 0600 modules ${DESTDIR}${SHAREDIR}/$PRODUCT
+    install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
     echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
 fi
 
 if [ -f helpers ]; then
-    run_install $OWNERSHIP -m 0600 helpers ${DESTDIR}${SHAREDIR}/$PRODUCT
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
 for f in modules.*; do
-    run_install $OWNERSHIP -m 0644 $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
     echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
 done
 
@@ -482,17 +498,17 @@ done
 if [ -d manpages ]; then
     cd manpages
 
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
+    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
     for f in *.8; do
 	gzip -c $f > $f.gz
-	run_install $T $INSTALLD $OWNERSHIP -m 0644 $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -502,7 +518,7 @@ if [ -d manpages ]; then
 fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -533,13 +549,13 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
 	chmod 755 ${DESTDIR}${SYSCONFDIR}
     fi
 
-    run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT}
+    install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
     echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}/${SBINDIR}/$PRODUCT
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
@@ -587,6 +603,13 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 	else
 	    cant_autostart
 	fi
+    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
+	/etc/init.d/$PRODUCT enable
+	if /etc/init.d/$PRODUCT enabled; then
+            echo "$PRODUCT will start automatically at boot"
+	else
+            cant_autostart
+	fi
     elif [ "$INITFILE" != rc.${PRODUCT} ]; then #Slackware starts this automatically
 	cant_autostart
     fi

Shorewall-lite/manpages/shorewall-lite.xml

@@ -329,6 +329,21 @@
       <arg choice="plain"><replaceable>address</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall-lite</command>
+
+      <arg
+      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
+
+      <arg>-<replaceable>options</replaceable></arg>
+
+      <arg choice="plain"><option>reload</option></arg>
+
+      <arg><option>-n</option></arg>
+
+      <arg><option>-p</option><arg><option>-C</option></arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall-lite</command>
 
@@ -708,6 +723,7 @@
           <para>If <option>-f</option> is given, the command will be processed
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
+          role="bold">reload</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
           role="bold">refresh</emphasis> command if that script exists.</para>
         </listitem>
@@ -1026,6 +1042,32 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">reload </emphasis>[-n] [-p]
+        [-<option>C</option>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.0, <emphasis
+          role="bold">reload</emphasis> is similar to <emphasis
+          role="bold">shorewall-lite start</emphasis> except that it assumes
+          that the firewall is already started. Existing connections are
+          maintained.</para>
+
+          <para>The <option>-n</option> option causes Shorewall-lite to avoid
+          updating the routing table(s).</para>
+
+          <para>The <option>-p</option> option causes the connection tracking
+          table to be flushed; the <command>conntrack</command> utility must
+          be installed to use this option.</para>
+
+          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
+          If the specified (or implicit) firewall script is the one that
+          generated the current running configuration, then the running
+          netfilter configuration will be reloaded as is so as to preserve the
+          iptables packet and byte counters.</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">reset [<replaceable>chain</replaceable>,
         ...]</emphasis><acronym/></term>
@@ -1043,9 +1085,10 @@
         [-<option>C</option>]</term>
 
         <listitem>
-          <para>Restart is similar to <emphasis role="bold">shorewall-lite
+          <para>Beginning with Shorewall 5.0.0, this command performs a true
-          start</emphasis> except that it assumes that the firewall is already
+          restart. The firewall is completely stopped as if a
-          started. Existing connections are maintained.</para>
+          <command>stop</command> command had been issued then it is started
+          again.</para>
 
           <para>The <option>-n</option> option causes Shorewall-lite to avoid
           updating the routing table(s).</para>

Shorewall-lite/shorewall-lite.conf

@@ -1,5 +1,5 @@
 ###############################################################################
-#  /etc/shorewall-lite/shorewall-lite.conf Version 4 - Change the following
+#  /etc/shorewall-lite/shorewall-lite.conf Version 5 - Change the following
 #  variables to override the values in the shorewall.conf file used to
 #  compile /var/lib/shorewall-lite/firewall. Those values may be found in
 #  /var/lib/shorewall-lite/firewall.conf.

Shorewall-lite/shorewall-lite.service.214

@@ -1,21 +0,0 @@
-#
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
-#
-#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
-#
-[Unit]
-Description=Shorewall IPv4 firewall (lite)
-Wants=network-online.target
-After=network-online.target
-Conflicts=iptables.service firewalld.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-EnvironmentFile=-/etc/sysconfig/shorewall-lite
-StandardOutput=syslog
-ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/sbin/shorewall-lite $OPTIONS stop
-
-[Install]
-WantedBy=basic.target

Shorewall-lite/shorewall-lite.service.debian

@@ -17,6 +17,7 @@ EnvironmentFile=-/etc/default/shorewall-lite
 StandardOutput=syslog
 ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
 ExecStop=/sbin/shorewall-lite $OPTIONS stop
+ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
 
 [Install]
 WantedBy=basic.target

Shorewall-lite/sysconfig

@@ -0,0 +1,26 @@
+#
+# Global start/restart/reload/stop options
+#
+OPTIONS=""
+
+#
+# Start options
+#
+STARTOPTIONS=""
+
+#
+# Restart options
+#
+RESTARTOPTIONS=""
+
+#
+# Reload options
+#
+RELOADOPTIONS=""
+
+#
+# Stop options
+#
+STOPOPTIONS=""
+
+# EOF

Shorewall-lite/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
@@ -28,6 +28,7 @@
 
 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-lite
+Product="Shorewall Lite"
 
 usage() # $1 = exit status
 {
@@ -168,7 +169,15 @@ if [ $configure -eq 1 ]; then
 fi
 
 if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
-    FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+    if [ $HOST = openwrt ]; then
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
+	    /etc/init.d/shorewall-lite disable
+	fi
+	
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
+    else
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
+    fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
 fi
@@ -187,21 +196,26 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-if [ -n "$SYSTEMD" ]; then
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
+
+if [ -n "$SERVICEDIR" ]; then
     [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
-    rm -f $SYSTEMD/shorewall-lite.service
+    rm -f $SERVICEDIR/shorewall-lite.service
 fi
 
 rm -f ${SBINDIR}/shorewall-lite
 
 rm -rf ${CONFDIR}/shorewall-lite
-rm -rf ${VARDIR}/shorewall-lite
+rm -rf ${VARDIR}
 rm -rf ${SHAREDIR}/shorewall-lite
 rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
+rm -f  ${SYSCONFDIR}/shorewall-lite
 
-rm -f ${MANDIR}/man5/shorewall-lite*
+if [ -n "${MANDIR}" ]; then
-rm -f ${MANDIR}/man8/shorewall-lite*
+    rm -f ${MANDIR}/man5/shorewall-lite*
+    rm -f ${MANDIR}/man8/shorewall-lite*
+fi
 
 echo "Shorewall Lite Uninstalled"
 

Shorewall/INSTALL

@@ -1,4 +1,4 @@
-Shoreline Firewall (Shorewall) Version 4
+Shoreline Firewall (Shorewall) Version 5
 -----         ----
 
 -----------------------------------------------------------------------------

Shorewall/Macros/macro.AMQP

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - AMQP Macro
+# Shorewall -- /usr/share/shorewall/macro.AMQP
 #
-# /usr/share/shorewall/macro.AMQP
+# This macro handles AMQP traffic.
-#
-#	This macro handles AMQP traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5672
 PARAM	-	-	udp	5672

Shorewall/Macros/macro.A_AllowICMPs

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - Audited AllowICMPs Macro
+# Shorewall -- /usr/share/shorewall/macro.A_AllowICMPs
 #
-# /usr/share/shorewall/macro.A_AllowICMPs
+# This macro audits and accepts needed ICMP types.
-#
-#	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
-?FORMAT 2
+#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE
-###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#					PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.A_DropDNSrep

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - Audited DropDNSrep Macro
+# Shorewall -- /usr/share/shorewall/macro.A_DropDNSrep
 #
-# /usr/share/shorewall/macro.A_DropDNSrep
+# This macro audits and drops DNS UDP replies.
-#
-#	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.A_DropUPnP

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - ADropUPnP Macro
+# Shorewall -- /usr/share/shorewall/macro.A_DropUPnP
 #
-# /usr/share/shorewall/macro.A_DropUPnP
+# This macro audits and drops UPnP probes on UDP port 1900.
-#
-#	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.ActiveDir

@@ -1,18 +1,13 @@
 #
-# Shorewall version 4 - Samba 4 Macro
+# Shorewall -- /usr/share/shorewall/macro.ActiveDir
-#
-# /usr/share/shorewall/macro.ActiveDir
-#
-#       This macro handles ports for Samba 4 Active Directory Service
-#
-# You can comment out the ports you do not want open
 #
+# This macro handles ports for Samba 4 Active Directory Service.
+# You can copy this file to /etc/shorewall[6]/ and comment out the ports you
+# do not want open.
 #
 ###############################################################################
-?FORMAT 2 
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM   -       -       tcp     389 	#LDAP services
 PARAM   -       -       udp	389  
 PARAM   -       -       tcp     636	#LDAP SSL

Shorewall/Macros/macro.AllowICMPs

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - AllowICMPs Macro
+# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
 #
-# /usr/share/shorewall/macro.AllowICMPs
+# This macro ACCEPTs needed ICMP types.
-#
-#	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.Amanda

@@ -1,17 +1,12 @@
 #
-# Shorewall version 4 - Amanda Macro
+# Shorewall -- /usr/share/shorewall/macro.Amanda
 #
-# /usr/share/shorewall/macro.Amanda
+# This macro handles connections required by the AMANDA backup system
-#
+# to back up remote nodes.  It does not provide the ability to restore
-#	This macro handles connections required by the AMANDA backup system
+# files from those nodes.
-#	to back up remote nodes.  It does not provide the ability to restore
-#	files from those nodes.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __AMANDA_HELPER )
  PARAM	-	-	udp	10080 { helper=amanda }

Shorewall/Macros/macro.Auth

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - Auth Macro
+# Shorewall -- /usr/share/shorewall/macro.Auth
 #
-# /usr/share/shorewall/macro.Auth
+# This macro handles Auth (identd) traffic.
-#
-#	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113

Shorewall/Macros/macro.BGP

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - BGP Macro
+# Shorewall -- /usr/share/shorewall/macro.BGP
 #
-# /usr/share/shorewall/macro.BGP
+# This macro handles BGP4 traffic.
-#
-#	This macro handles BGP4 traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4

Shorewall/Macros/macro.BLACKLIST

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - blacklist Macro
+# Shorewall -- /usr/share/shorewall/macro.blacklist
 #
-# /usr/share/shorewall/macro.blacklist
+# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
-#
-#	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL
 blacklog
 ?else

Shorewall/Macros/macro.BitTorrent

@@ -1,21 +1,16 @@
 #
-# Shorewall version 4 - BitTorrent Macro
+# Shorewall -- /usr/share/shorewall/macro.BitTorrent
 #
-# /usr/share/shorewall/macro.BitTorrent
+# This macro handles BitTorrent traffic for BitTorrent 3.1 and earlier.
 #
-#	This macro handles BitTorrent traffic for BitTorrent 3.1 and earlier.
+# If you are running BitTorrent 3.2 or later, you should use the
-#
+# BitTorrent32 macro.
-#	If you are running BitTorrent 3.2 or later, you should use the
-#	BitTorrent32 macro.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889
 #
 # It may also be necessary to allow UDP traffic:
 #
 PARAM	-	-	udp	6881
-#

Shorewall/Macros/macro.BitTorrent32

@@ -1,18 +1,13 @@
 #
-# Shorewall version 4 - BitTorrent 3.2 Macro
+# Shorewall -- /usr/share/shorewall/macro.BitTorrent32
 #
-# /usr/share/shorewall/macro.BitTorrent32
+# This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
-#
-#	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999
 #
 # It may also be necessary to allow UDP traffic:
 #
 PARAM	-	-	udp	6881
-#

Shorewall/Macros/macro.CVS

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - CVS Macro
+# Shorewall -- /usr/share/shorewall/macro.CVS
 #
-# /usr/share/shorewall/macro.CVS
+# This macro handles connections to the CVS pserver.
-#
-#	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401

Shorewall/Macros/macro.Citrix

@@ -1,16 +1,12 @@
 #
-# Shorewall version 4 - Citrix/ICA Macro
+# Shorewall -- /usr/share/shorewall/macro.Citrix
 #
-# /usr/share/shorewall/macro.Citrix
+# This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
-#
+# ICA Session Reliability)
-#	This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
-#	ICA Session Reliability)
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA
 PARAM	-	-	udp	1604	# ICA Browser
 PARAM	-	-	tcp	2598	# CGP Session Reliabilty

Shorewall/Macros/macro.DAAP

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - DAAP Macro
+# Shorewall -- /usr/share/shorewall/macro.DAAP
 #
-# /usr/share/shorewall/macro.DAAP
+# This macro handles DAAP (Digital Audio Access Protocol) traffic.
-#
+# The protocol is used by iTunes, Rythmbox and other similar daemons.
-#	This macro handles DAAP (Digital Audio Access Protocol) traffic.
-#	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689
 PARAM	-	-	udp	3689

Shorewall/Macros/macro.DCC

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - DCC Macro
+# Shorewall -- /usr/share/shorewall/macro.DCC
 #
-# /usr/share/shorewall/macro.DCC
+# This macro handles DCC (Distributed Checksum Clearinghouse) traffic.
-#
+# DCC is a distributed spam filtering mechanism.
-#	This macro handles DCC (Distributed Checksum Clearinghouse) traffic.
-#	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277

Shorewall/Macros/macro.DHCPfwd

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - DHCPfwd Macro
+# Shorewall -- /usr/share/shorewall/macro.DHCPfwd
 #
-# /usr/share/shorewall/macro.DHCPfwd
+# This macro (bidirectional) handles forwarded DHCP traffic
-#
-#	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP
 PARAM	DEST	SOURCE	udp	67:68	67:68	# DHCP

Shorewall/Macros/macro.DNS

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - DNS Macro
+# Shorewall --  /usr/share/shorewall/macro.DNS
 #
-# /usr/share/shorewall/macro.DNS
+# This macro handles DNS traffic.
-#
-#	This macro handles DNS traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53
 PARAM	-	-	tcp	53

Shorewall/Macros/macro.Distcc

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - Distcc Macro
+# Shorewall -- /usr/share/shorewall/macro.Distcc
 #
-# /usr/share/shorewall/macro.Distcc
+# This macro handles connections to the Distributed Compiler service.
-#
-#	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632

Shorewall/Macros/macro.Drop

@@ -1,20 +1,15 @@
 #
-# Shorewall version 4 - Drop Macro
+# Shorewall -- /usr/share/shorewall/macro.Drop
 #
-# /usr/share/shorewall/macro.Drop
+# This macro generates the same rules as the Drop default action
+# It is used in place of action.Drop when USE_ACTIONS=No.
 #
-#	This macro generates the same rules as the Drop default action
+# Example:
-#	It is used in place of action.Drop when USE_ACTIONS=No.
 #
-#	Example:
+#	Drop	net	all
-#
-#		Drop	net	all
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #
 # Don't log 'auth' DROP
 #

Shorewall/Macros/macro.DropDNSrep

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - DropDNSrep Macro
+# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
 #
-# /usr/share/shorewall/macro.DropDNSrep
+# This macro silently drops DNS UDP replies
-#
-#	This macro silently drops DNS UDP replies
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.DropUPnP

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - DropUPnP Macro
+# Shorewall -- /usr/share/shorewall/macro.DropUPnP
 #
-# /usr/share/shorewall/macro.DropUPnP
+# This macro silently drops UPnP probes on UDP port 1900
-#
-#	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.Edonkey

@@ -1,36 +1,31 @@
 #
-# Shorewall version 4 - Edonkey Macro
+# Shorewall -- /usr/share/shorewall/macro.Edonkey
 #
-# /usr/share/shorewall/macro.Edonkey
+# This macro handles Edonkey traffic.
 #
-#	This macro handles Edonkey traffic.
+# http://www.portforward.com/english/routers/port_forwarding/2wire/1000s/eDonkey.htm
+# says to use udp 5737 rather than 4665.
 #
+# http://www.amule.org/wiki/index.php/FAQ_ed2k says this:
 #
-#	http://www.portforward.com/english/routers/port_forwarding/2wire/1000s/eDonkey.htm
+# 4661 TCP (outgoing) Port, on which a server listens for connection
-#	says to use udp 5737 rather than 4665.
+# (defined by server).
 #
-#	http://www.amule.org/wiki/index.php/FAQ_ed2k says this:
+# 4665 UDP (outgoing) used for global server searches and global source
+# queries. This is always Server TCP port (in this case 4661) + 4.
 #
-#	4661 TCP (outgoing) Port, on which a server listens for connection
+# 4662 TCP (outgoing and incoming) Client to client transfers.
-#	(defined by server).
 #
-#	4665 UDP (outgoing) used for global server searches and global source
+# 4672 UDP (outgoing and incoming) Extended eMule protocol, Queue
-#	queries. This is always Server TCP port (in this case 4661) + 4.
+# Rating, File Reask Ping
 #
-#	4662 TCP (outgoing and incoming) Client to client transfers.
+# 4711 TCP WebServer listening port.
 #
-#	4672 UDP (outgoing and incoming) Extended eMule protocol, Queue
+# 4712 TCP External Connection port. Used to communicate aMule with other
-#	Rating, File Reask Ping
+# applications such as aMule WebServer or aMuleCMD.
-#
-#	4711 TCP WebServer listening port.
-#
-#	4712 TCP External Connection port. Used to communicate aMule with other
-#	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662
 PARAM	-	-	udp	4665

Shorewall/Macros/macro.FTP

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - FTP Macro
+# Shorewall -- /usr/share/shorewall/macro.FTP
 #
-# /usr/share/shorewall/macro.FTP
+# This macro handles FTP traffic.
-#
-#	This macro handles FTP traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )
  PARAM	-	-	tcp	21 { helper=ftp }
 ?else

Shorewall/Macros/macro.Finger

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - Finger Macro
+# Shorewall -- /usr/share/shorewall/macro.Finger
 #
-# /usr/share/shorewall/macro.Finger
+# This macro handles Finger protocol.
-#
+# You should not generally open your finger information to internet.
-#	This macro handles Finger protocol. You should not generally open
-#	your finger information to internet.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79

Shorewall/Macros/macro.GNUnet

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - GNUnet Macro
+# Shorewall -- /usr/share/shorewall/macro.GNUnet
 #
-# /usr/share/shorewall/macro.GNUnet
+# This macro handles GNUnet (secure peer-to-peer networking) traffic.
-#
-#	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086
 PARAM	-	-	udp	2086
 PARAM	-	-	tcp	1080

Shorewall/Macros/macro.GRE

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 - GRE Macro
+# Shorewall -- /usr/share/shorewall/macro.GRE
 #
-# /usr/share/shorewall/macro.GRE
+# This macro (bidirectional) handles Generic Routing Encapsulation (GRE).
-#
-#	This macro (bi-directional) handles Generic Routing Encapsulation
-#	traffic (RFC 1701)
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE
 PARAM	DEST	SOURCE	47	# GRE

Shorewall/Macros/macro.Git

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - Git Macro
+# Shorewall -- /usr/share/shorewall/macro.Git
 #
-# /usr/share/shorewall/macro.Git
+# This macro handles Git traffic.
-#
-#	This macro handles Git traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418

Shorewall/Macros/macro.Gnutella

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - Gnutella Macro
+# Shorewall -- /usr/share/shorewall/macro.Gnutella
 #
-# /usr/share/shorewall/macro.Gnutella
+# This macro handles Gnutella traffic.
-#
-#	This macro handles Gnutella traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346
 PARAM	-	-	udp	6346

Shorewall/Macros/macro.Goto-Meeting

@@ -1,14 +1,11 @@
 #
-# Shorewall version 4 - Citrix/Goto Meeting macro
+# Shorewall -- /usr/share/shorewall/macro.Goto-Meeting
 #
-# /usr/share/shorewall/macro.Goto-Meeting
+# This macro handles Citrix/Goto Meeting.
-#          by Eric Teeter
+#
-#       This macro handles Citrix/Goto Meeting
+###############################################################################
-#       Assumes that ports 80 and 443 are already open
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-#       If needed, use the macros that open Http and Https to reduce redundancy
+
-####################################################################################
+PARAM      -    -       tcp     8200    # Goto Meeting only needed outbound
-?FORMAT 2
+HTTP
-####################################################################################
+HTTPS
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
-PARAM      -    -       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.HKP

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - HKP Macro
+# Shorewall -- /usr/share/shorewall/macro.HKP
 #
-# /usr/share/shorewall/macro.HKP
+# This macro handles OpenPGP HTTP keyserver protocol traffic.
-#
-#	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371

Shorewall/Macros/macro.HTTP

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - HTTP Macro
+# Shorewall -- /usr/share/shorewall/macro.HTTP
 #
-# /usr/share/shorewall/macro.HTTP
+# This macro handles plaintext HTTP (WWW) traffic.
-#
-#	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80

Shorewall/Macros/macro.HTTPS

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - HTTPS Macro
+# Shorewall -- /usr/share/shorewall/macro.HTTPS
 #
-# /usr/share/shorewall/macro.HTTPS
+# This macro handles HTTPS (WWW over TLS) traffic.
-#
-#	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443

Shorewall/Macros/macro.ICPV2

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - ICPV2 Macro
+# Shorewall - /usr/share/shorewall/macro.ICPV2
 #
-# /usr/share/shorewall/macro.ICPV2
+# This macro handles Internet Cache Protocol V2 (Squid) traffic.
-#
-#	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130

Shorewall/Macros/macro.ICQ

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - ICQ Macro
+# Shorewall -- /usr/share/shorewall/macro.ICQ
 #
-# /usr/share/shorewall/macro.ICQ
+# This macro handles ICQ, now called AOL Instant Messenger (or AIM).
-#
-#	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190

Shorewall/Macros/macro.ILO

@@ -1,17 +1,13 @@
 #
-# Shorewall version 4 - ILO Macro
+# Shorewall -- /usr/share/shorewall/macro.ILO
 #
-# /usr/share/shorewall/macro.ILO
+# This macro handles console redirection with HP ILO 2+,
-#
+# Use this macro to open access to your ILO interface from management
-#	This macro handles console redirection with HP ILO 2+,
+# workstations.
-#	Use this macro to open access to your ILO interface from management
-#	workstations.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3002		# Raw serial data
 PARAM	-	-	tcp	9300		# Shared Remote Console
 PARAM	-	-	tcp	17988		# Virtual Media

Shorewall/Macros/macro.IMAP

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - IMAP Macro
+# Shorewall -- /usr/share/shorewall/macro.IMAP
 #
-# /usr/share/shorewall/macro.IMAP
+# This macro handles plaintext and STARTTLS IMAP traffic.
-#
+# For SSL (TLS) IMAP, see macro.IMAPS.
-#	This macro handles plaintext IMAP traffic.  For encrypted IMAP,
-#	see macro.IMAPS.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143

Shorewall/Macros/macro.IMAPS

@@ -1,14 +1,11 @@
 #
-# Shorewall version 4 - IMAPS Macro
+# Shorewall -- /usr/share/shorewall/macro.IMAPS
 #
-# /usr/share/shorewall/macro.IMAPS
+# This macro handles SSL (TLS) IMAP traffic.
-#
+# For plaintext (not recommended) and STARTLS (recommended) IMAP see
-#	This macro handles encrypted IMAP traffic.  For plaintext IMAP
+# macro.IMAP.
-#	(not recommended), see macro.IMAP.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993

Shorewall/Macros/macro.IPIP

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - IPIP Macro
+# Shorewall -- /usr/share/shorewall/macro.IPIP
 #
-# /usr/share/shorewall/macro.IPIP
+# This macro (bidirectional) handles IPIP capsulation traffic
-#
-#	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP
 PARAM	DEST	SOURCE	94	# IPIP

Shorewall/Macros/macro.IPMI

@@ -1,18 +1,15 @@
 #
-# Shorewall version 4 - IPMI Macro
+# Shorewall -- /usr/share/shorewall/macro.IPMI
 #
-# /usr/share/shorewall/macro.IPMI
+# This macro handles IPMI console redirection with RMCP protocol.
-#
+# Tested to work with with Asus (AMI),
-#	This macro handles IPMI console redirection with Asus (AMI),
+# Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
-#	Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
+# Use this macro to open access to your IPMI interface from management
-#	Use this macro to open access to your IPMI interface from management
+# workstations.
-#	workstations.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
 PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)

Shorewall/Macros/macro.IPP

@@ -1,13 +1,9 @@
 #
-# Shorewall version 3.2 - IPP Macro
+# Shorewall -- /usr/share/shorewall/macro.IPP
 #
-# /usr/share/shorewall/macro.IPP
+# This macro handles Internet Printing Protocol (IPP).
-#
-#	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631

Shorewall/Macros/macro.IPPbrd

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - IPP Broadcast Macro
+# Shorewall -- /usr/share/shorewall/macro.IPPbrd
 #
-# /usr/share/shorewall/macro.IPPbrd
+# This macro handles Internet Printing Protocol (IPP) broadcasts.
-#
+# If you also need to handle TCP 631 connections in the opposite
-#	This macro handles Internet Printing Protocol (IPP) broadcasts.
+# direction, use the IPPserver Macro
-#       If you also need to handle TCP 631 connections in the opposite
-#       direction, use the IPPserver Macro
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631

Shorewall/Macros/macro.IPPserver

@@ -1,31 +1,28 @@
 #
-# Shorewall version 4 - IPPserver Macro
+# Shorewall -- /usr/share/shorewall/macro.IPPserver
 #
-# /usr/share/shorewall/macro.IPPserver
+# This macro handles Internet Printing Protocol (IPP), indicating
+# that DEST is a printing server for SOURCE.  The macro allows
+# print queue broadcasts from the server to the client, and
+# printing connections from the client to the server.
 #
-#	This macro handles Internet Printing Protocol (IPP), indicating
+# Example usage on a single-interface firewall which is a print client:
-#	that DEST is a printing server for SOURCE.  The macro allows
-#	print queue broadcasts from the server to the client, and
-#	printing connections from the client to the server.
 #
-#	Example usage on a single-interface firewall which is a print
+#	IPPserver(ACCEPT)	$FW	net
-#	client:
-#		IPPserver/ACCEPT $FW net
 #
-#	Example for a two-interface firewall which acts as a print
+# Example for a two-interface firewall which acts as a print server for loc:
-#	server for loc:
-#		IPPserver/ACCEPT loc $FW
 #
-#	NOTE: If you want both to serve requests for local printers and
+#	IPPserver(ACCEPT)	loc	$FW
-#	listen to requests for remote printers (i.e. your CUPS server is
+#
-#	also a client), you need to apply the rule twice, e.g.
+# NOTE: If you want both to serve requests for local printers and listen to
-#		IPPserver/ACCEPT loc $FW
+# requests for remote printers (i.e. your CUPS server is also a client),
-#		IPPserver/ACCEPT $FW loc
+# you need to apply the rule twice, e.g.
+#
+#	IPPserver(ACCEPT)	loc	$FW
+#	IPPserver(ACCEPT)	$FW	loc
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631
 PARAM	DEST	SOURCE	udp	631

Shorewall/Macros/macro.IPsec

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - IPsec Macro
+# Shorewall -- /usr/share/shorewall/macro.IPsec
 #
-# /usr/share/shorewall/macro.IPsec
+# This macro (bidirectional) handles IPsec traffic
-#
-#	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	50			# ESP
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecah

@@ -1,16 +1,12 @@
 #
-# Shorewall version 4 - IPsecah Macro
+# Shorewall -- /usr/share/shorewall/macro.IPsecah
 #
-# /usr/share/shorewall/macro.IPsecah
+# This macro (bidirectional) handles IPsec authentication (AH) traffic.
-#
+# This is insecure. You should use ESP with encryption for security.
-#	This macro (bidirectional) handles IPsec authentication (AH) traffic.
-#       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	51			# AH
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecnat

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - IPsecnat Macro
+# Shorewall -- /usr/share/shorewall/macro.IPsecnat
 #
-# /usr/share/shorewall/macro.IPsecnat
+# This macro (bidirectional) handles IPsec traffic and Nat-Traversal
-#
-#	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE
 PARAM	-	-	udp	4500	# NAT-T
 PARAM	-	-	50		# ESP

Shorewall/Macros/macro.IRC

@@ -1,15 +1,10 @@
 #
-# Shorewall version 4 IRC Macro
+# Shorewall -- /usr/share/shorewall/macro.IRC
 #
-# /usr/share/shorewall/macro.IRC
+# This macro handles IRC traffic (Internet Relay Chat).
-#
-#	This macro handles IRC traffic (Internet Relay Chat).
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __IRC_HELPER  )
  PARAM	-	-	tcp	6667 { helper=irc }

Shorewall/Macros/macro.JAP

@@ -1,19 +1,14 @@
 #
-# Shorewall version 4 - JAP Macro
+# Shorewall -- /usr/share/shorewall/macro.JAP
 #
-# /usr/share/shorewall/macro.JAP
+# This macro handles JAP Anon Proxy Mix server traffic.
-#
+# It is NOT for people trying to browse anonymously!
-#	This macro handles JAP Anon Proxy traffic.  This macro is for
-#	administrators running a Mix server.  It is NOT for people trying
-#	to browse anonymously!
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port
 PARAM	-	-	tcp	6544 # HTTP port
 PARAM	-	-	tcp	6543 # InfoService port
-HTTPS(PARAM)
+HTTPS
-SSH(PARAM)
+SSH

Shorewall/Macros/macro.Jabber

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - Jabber Macro
+# Shorewall -- /usr/share/shorewall/macro.Jabber
 #
-# /usr/share/shorewall/macro.Jabber
+# This macro handles Jabber traffic.
-#
-#	This macro accepts Jabber traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberPlain

@@ -1,14 +1,9 @@
 #
-# Shorewall version 4 - JabberPlain Macro
+# Shorewall -- /usr/share/shorewall/macro.JabberPlain
 #
-# /usr/share/shorewall/macro.JabberPlain
+# This macro is deprecated - use of macro.Jabber instead is recommended.
-#
-#	This macro accepts Jabber traffic (plaintext). This macro is
-#	deprecated - use of macro.Jabber instead is recommended.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 Jabber

Shorewall/Macros/macro.JabberSecure

@@ -1,15 +1,9 @@
 #
-# Shorewall version 4 - JabberSecure (SSL) Macro
+# Shorewall -- /usr/share/shorewall/macro.JabberSecure
 #
-# /usr/share/shorewall/macro.JabberSecure
+# This macro handles deprecated Jabber (SSL) traffic. Use STARTTLS instead.
-#
-#	This macro accepts Jabber traffic (SSL). Use of Jabber with SSL
-#	is deprecated, please configure Jabber with STARTTLS and use
-#	Jabber macro instead.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223

Shorewall/Macros/macro.Jabberd

@@ -1,13 +1,9 @@
 #
-# Shorewall version 3.4 - Jabberd (server intercommunication)
+# Shorewall -- /usr/share/shorewall/macro.Jabberd
 #
-# /usr/share/shorewall/macro.Jabberd
+# This macro handles Jabberd intercommunication traffic
-#
-#	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269

Shorewall/Macros/macro.Jetdirect

@@ -1,13 +1,9 @@
 #
-# Shorewall version 3.2 - Jetdirect Macro
+# Shorewall -- /usr/share/shorewall/macro.Jetdirect
 #
-# /usr/share/shorewall/macro.Jetdirect
+# This macro handles HP Jetdirect printing.
-#
-#	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100

Shorewall/Macros/macro.Kerberos

@@ -1,14 +1,10 @@
 #
-# Shorewall version 4 - Kerberos Macro
+# Shorewall -- /usr/share/shorewall/macro.Kerberos
 #
-# /usr/share/shorewall/macro.Kerberos
+# This macro handles Kerberos traffic.
-#
-#	This macro handles Kerberos traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88
 PARAM	-	-	udp	88

Shorewall/Macros/macro.L2TP

@@ -1,15 +1,11 @@
 #
-# Shorewall version 4 - L2TP Macro
+# Shorewall -- /usr/share/shorewall/macro.L2TP
 #
-# /usr/share/shorewall/macro.L2TP
+# This macro (bidirectional) handles Layer 2 Tunneling Protocol traffic.
-#
+# (RFC 2661)
-#	This macro (bidirectional) handles Layer 2 Tunneling Protocol traffic
-#	(RFC 2661)
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP
 PARAM	DEST	SOURCE	udp	1701	# L2TP

Shorewall/Macros/macro.LDAP

@@ -1,18 +1,14 @@
 #
-# Shorewall version 4 - LDAP Macro
+# Shorewall -- /usr/share/shorewall/macro.LDAP
 #
-# /usr/share/shorewall/macro.LDAP
+# This macro handles plaintext LDAP traffic. For encrypted LDAP
-#
+# traffic, see macro.LDAPS.  Use of LDAPS is recommended (and is
-#	This macro handles plaintext LDAP traffic.  For encrypted LDAP
+# required by some directory services) if you want to do user
-#	traffic, see macro.LDAPS.  Use of LDAPS is recommended (and is
+# authentication over LDAP.  Note that some LDAP implementations
-#	required by some directory services) if you want to do user
+# support initiating TLS connections via the plaintext LDAP port.
-#	authentication over LDAP.  Note that some LDAP implementations
+# Consult your LDAP server documentation for details.
-#	support initiating TLS connections via the plaintext LDAP port.
-#	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389

Shorewall/Macros/macro.LDAPS

@@ -1,18 +1,14 @@
 #
-# Shorewall version 4 - LDAPS Macro
+# Shorewall -- /usr/share/shorewall/macro.LDAPS
 #
-# /usr/share/shorewall/macro.LDAPS
+# This macro handles encrypted LDAP traffic.  For plaintext LDAP
-#
+# traffic, see macro.LDAP.  Use of LDAPS is recommended (and is
-#	This macro handles encrypted LDAP traffic.  For plaintext LDAP
+# required by some directory services) if you want to do user
-#	traffic, see macro.LDAP.  Use of LDAPS is recommended (and is
+# authentication over LDAP.  Note that some LDAP implementations
-#	required by some directory services) if you want to do user
+# support initiating TLS connections via the plaintext LDAP port.
-#	authentication over LDAP.  Note that some LDAP implementations
+# Consult your LDAP server documentation for details.
-#	support initiating TLS connections via the plaintext LDAP port.
-#	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	636

Shorewall/Macros/macro.MSA

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.MSA
+#
+# This macro handles mail message submission agent (MSA) traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	587

Shorewall/Macros/macro.MSNP

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - MSNP Macro
+# Shorewall - /usr/share/shorewall/macro.MSNP
 #
-# /usr/share/shorewall/macro.MSNP
+# This macro handles MSNP (MicroSoft Notification Protocol)
-#
-#	This macro handles MSNP (MicroSoft Notification Protocol)
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1863

Shorewall/Macros/macro.MSSQL

@@ -1,13 +1,10 @@
 #
-# Shorewall version 4 - MSSQL Macro
+# Shorewall -- /usr/share/shorewall/macro.MSSQL
 #
-# /usr/share/shorewall/macro.MSSQL
+# This macro handles MSSQL (Microsoft SQL Server)
-#
-#	This macro handles MSSQL (Microsoft SQL Server)
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1433
+PARAM	-	-	udp	1434

Shorewall/Macros/macro.Mail

@@ -1,21 +1,17 @@
 #
-# Shorewall version 4 - Mail Macro
+# Shorewall -- /usr/share/shorewall/macro.Mail
 #
-# /usr/share/shorewall/macro.Mail
+# This macro handles SMTP (email secure and insecure) traffic.
+# It's the aggregate of macro.SMTP, macro.SMTPS, macro.MSA.
 #
-#	This macro handles SMTP (email secure and insecure) traffic.
+# Note: This macro handles traffic between an MUA (Email client)
-#	It's the aggregate of macro.SMTP, macro.SMTPS, macro.Submission.
+# and an MTA (mail server) or between MTAs. It does not enable
-#
+# reading of email via POP3 or IMAP. For those you need to use
-#	Note: This macro handles traffic between an MUA (Email client)
+# the POP3 or IMAP macros.
-#	and an MTA (mail server) or between MTAs. It does not enable
-#	reading of email via POP3 or IMAP. For those you need to use
-#	the POP3 or IMAP macros.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+SMTP
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+SMTPS
-PARAM	-	-	tcp	25
+MSA
-PARAM	-	-	tcp	465
-PARAM	-	-	tcp	587

Shorewall/Macros/macro.MongoDB

@@ -1,13 +1,9 @@
 #
-# Shorewall version 4 - MongoDB Macro
+# Shorewall -- /usr/share/shorewall/macro.MongoDB
 #
-# /usr/share/shorewall/macro.MongoDB
+# This macro handles MongoDB Daemon/Router traffic.
-#
-#	This macro handles MongoDB Daemon/Router traffic.
 #
 ###############################################################################
-?FORMAT 2
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-###############################################################################
+
-#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	27017