More prerule fixes in expand_rule()

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall/Perl/Shorewall/Accounting.pm

@@ -59,21 +59,21 @@ our $acctable;
 #
 
 use constant {
-	      LEGACY      => 0,
+	      LEGACY_SECTION      => 0,
-	      PREROUTING  => 1,
+	      PREROUTING_SECTION  => 1,
-	      INPUT       => 2,
+	      INPUT_SECTION       => 2,
-	      OUTPUT      => 3,
+	      OUTPUT_SECTION      => 3,
-	      FORWARD     => 4,
+	      FORWARD_SECTION     => 4,
-	      POSTROUTING => 5
+	      POSTROUTING_SECTION => 5
 	  };
 #
 # Map names to values
 #
-our %asections = ( PREROUTING  => PREROUTING,
+our %asections = ( PREROUTING  => PREROUTING_SECTION,
-		   INPUT       => INPUT,
+		   INPUT       => INPUT_SECTION,
-		   FORWARD     => FORWARD,
+		   FORWARD     => FORWARD_SECTION,
-		   OUTPUT      => OUTPUT,
+		   OUTPUT      => OUTPUT_SECTION,
-		   POSTROUTING => POSTROUTING
+		   POSTROUTING => POSTROUTING_SECTION
 		 );
 
 #
@@ -157,7 +157,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 
     $jumpchainref = 0;
 
-    $asection = LEGACY if $asection < 0;
+    $asection = LEGACY_SECTION if $asection < 0;
 
     our $disposition = '';
 

Shorewall/Perl/Shorewall/Chains.pm

@@ -138,6 +138,17 @@ our %EXPORT_TAGS = (
 				       ALL_COMMANDS
 				       NOT_RESTORE
 
+				       PREROUTING
+				       INPUT
+				       FORWARD
+				       OUTPUT
+				       POSTROUTING
+				       ALLCHAINS
+				       STICKY
+				       STICKO
+				       REALPREROUTING
+				       ACTIONCHAIN
+
 				       unreachable_warning
 				       state_match
 				       state_imatch
@@ -188,6 +199,7 @@ our %EXPORT_TAGS = (
 				       ensure_raw_chain
 				       ensure_rawpost_chain
 				       new_standard_chain
+				       new_action_chain
 				       new_builtin_chain
 				       new_nat_chain
 				       optimize_chain
@@ -325,6 +337,10 @@ our $VERSION = 'MODULEVERSION';
 #                                               complete     => The last rule in the chain is a -g or a simple -j to a terminating target
 #                                                               Suppresses adding additional rules to the chain end of the chain
 #                                               sections     => { <section> = 1, ... } - Records sections that have been completed.
+#                                               chainnumber  => Numeric enumeration of the builtin chains (mangle table only).
+#                                               allowedchains
+#                                                            => Mangle action chains only -- specifies the set of builtin chains where
+#                                                               this action may be used.
 #                                             } ,
 #                                <chain2> => ...
 #                              }
@@ -456,6 +472,22 @@ use constant { NO_RESTRICT         => 0,   # FORWARD chain rule     - Both -i an
 	       ALL_RESTRICT        => 12,  # fw->fw rule            - neither -i nor -o allowed
 	       DESTIFACE_DISALLOW  => 32,  # Don't allow dest interface. Similar to INPUT_RESTRICT but generates a more relevant error message
 	       };
+#
+# Mangle Table allowed chains enumeration
+#
+use constant {
+    PREROUTING     => 1,        #Actually tcpre
+    INPUT          => 2,        #Actually tcin
+    FORWARD        => 4,        #Actually tcfor
+    OUTPUT         => 8,        #Actually tcout
+    POSTROUTING    => 16,       #Actually tcpost
+    ALLCHAINS      => 31,
+    STICKY         => 32,
+    STICKO         => 64,
+    REALPREROUTING => 128,
+    ACTIONCHAIN    => 256,
+};
+
 #
 # Possible IPSET options
 #
@@ -904,7 +936,7 @@ sub set_rule_option( $$$ ) {
 	    #
 	    # Shorewall::Rules::perl_action_tcp_helper() can produce rules that have two -p specifications.
 	    # The first will have a modifier like '! --syn' while the second will not.  We want to retain
-	    # the first while 
+	    # the first one.
 	    if ( $option eq 'p' ) {
 		my ( $proto ) = split( ' ', $ruleref->{p} );
 		return if $proto eq $value;
@@ -2325,6 +2357,7 @@ sub new_chain($$)
 		     filtered       => 0,
 		     optflags       => 0,
 		     origin         => shortlineinfo( '' ),
+		     restriction    => NO_RESTRICT,
 		   };
 
     trace( $chainref, 'N', undef, '' ) if $debug;
@@ -2738,6 +2771,13 @@ sub new_standard_chain($) {
     $chainref;
 }
 
+sub new_action_chain($$) {
+    my $chainref = &new_chain( @_ );
+    $chainref->{referenced} = 1;
+    $chainref->{allowedchains} = ALLCHAINS | REALPREROUTING | ACTIONCHAIN;
+    $chainref;
+}
+
 sub new_nat_chain($) {
     my $chainref = new_chain 'nat' ,$_[0];
     $chainref->{referenced} = 1;
@@ -3001,6 +3041,12 @@ sub initialize_chain_table($) {
 	    $chainref = new_nat_chain( $globals{POSTROUTING} = 'SHOREWALL' );
 	    set_optflags( $chainref, DONT_OPTIMIZE | DONT_DELETE | DONT_MOVE );
 	}
+
+	$mangle_table->{PREROUTING}{chainnumber}    = PREROUTING;
+	$mangle_table->{INPUT}{chainnumber}         = INPUT;
+	$mangle_table->{OUTPUT}{chainnumber}        = OUTPUT;
+	$mangle_table->{FORWARD}{chainnumber}       = FORWARD;
+	$mangle_table->{POSTROUTING}{chainnumber}   = POSTROUTING;
     }
 
     if ( my $docker = $config{DOCKER} ) {
@@ -4469,7 +4515,7 @@ sub clearrule() {
 sub state_match( $ ) {
     my $state = shift;
 
-    if ( $state eq 'ALL' ) {
+    if ( $state eq 'ALL' || $state eq '-' ) {
 	''
     } else {
 	have_capability( 'CONNTRACK_MATCH' ) ? ( "-m conntrack --ctstate $state " ) : ( "-m state --state $state " );
@@ -6782,14 +6828,12 @@ sub get_interface_gateway ( $;$ ) {
     my $interface = get_physical $logical;
     my $variable = interface_gateway( $interface );
 
-    my $routine = $config{USE_DEFAULT_RT} ? 'detect_dynamic_gateway' : 'detect_gateway';
-
     $global_variables |= ALL_COMMANDS;
 
     if ( interface_is_optional $logical ) {
-	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$($routine $interface));
+	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface));
     } else {
-	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$($routine $interface)
+	$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface)
 [ -n "\$$variable" ] || startup_error "Unable to detect the gateway through interface $interface");
     }
 
@@ -7702,7 +7746,7 @@ sub expand_rule( $$$$$$$$$$$$;$ )
 			# No logging or user-specified logging -- add the target rule with matches to the rule chain
 			#
 			if ( $targetref ) {
-			    add_expanded_jump( $chainref, $targetref , 0, $matches );
+			    add_expanded_jump( $chainref, $targetref , 0, $prerule . $matches );
 			} else {
 			    add_rule( $chainref, $prerule . $matches . $jump , 1 );
 			}
@@ -7718,7 +7762,7 @@ sub expand_rule( $$$$$$$$$$$$;$ )
 				       '' ,
 				       $logtag ,
 				       'add' ,
-				       $matches
+				       $prerule . $matches
 				      );
 		    } elsif ( $logname || $basictarget eq 'RETURN' ) {
 			log_rule_limit(
@@ -7729,7 +7773,7 @@ sub expand_rule( $$$$$$$$$$$$;$ )
 				       '',
 				       $logtag,
 				       'add',
-				       $matches );
+				       $prerule . $matches );
 
 			if ( $targetref ) {
 			    add_expanded_jump( $chainref, $targetref, 0, $matches );
@@ -7749,7 +7793,7 @@ sub expand_rule( $$$$$$$$$$$$;$ )
 						     $actparms{disposition} || $disposition,
 						     $target ),
 					   $terminating{$basictarget} || ( $targetref && $targetref->{complete} ),
-					   $matches );
+					   $prerule . $matches );
 		    }
 
 		    conditional_rule_end( $chainref ) if $cond3;
@@ -8578,17 +8622,17 @@ sub preview_netfilter_load() {
 		if ( $name =~ /^DOCKER/ ) {
 		    if ( $name eq 'DOCKER' ) {
 			enter_cmd_mode;
-			emit( '[ -n "$g_docker" ] && echo ":DOCKER - [0:0]" >&3' );
+			print( '[ -n "$g_docker" ] && echo ":DOCKER - [0:0]" >&3' );
 			enter_cat_mode;
 		    } elsif ( $name eq 'DOCKER-ISOLATION' ) {
 			enter_cmd_mode;
-			emit( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
+			print( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
 			enter_cat_mode;
 		    } else {		    
-			emit_unindented ":$name - [0:0]";
+			print( ":$name - [0:0]" );
 		    }
 		} else {
-		    emit_unindented ":$name - [0:0]";
+		    print( ":$name - [0:0]" );
 		}
 
 		push @chains, $chainref;

Shorewall/Perl/Shorewall/Compiler.pm

@@ -95,7 +95,7 @@ sub generate_script_1( $ ) {
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
 
 	    copy  $globals{SHAREDIRPL} . '/lib.core', 0;
-	    copy2 $globals{SHAREDIRPL} . '/lib.common', 0;
+	    copy2 $globals{SHAREDIRPL} . '/lib.common', $debug;
 	}
 
     }

Shorewall/Perl/Shorewall/Config.pm

@@ -2506,10 +2506,10 @@ sub join_parts( $$$ ) {
 }
 
 #
-# Evaluate an expression in an ?IF, ?ELSIF or ?SET directive
+# Evaluate an expression in an ?IF, ?ELSIF, ?SET or ?ERROR directive
 #
-sub evaluate_expression( $$$ ) {
+sub evaluate_expression( $$$$ ) {
-    my ( $expression , $filename , $linenumber ) = @_;
+    my ( $expression , $filename , $linenumber, $just_expand ) = @_;
     my $val;
     my $count = 0;
     my $chain = $actparms{chain};
@@ -2565,7 +2565,7 @@ sub evaluate_expression( $$$ ) {
 
     print "EXPR=> $expression\n" if $debug;
 
-    if ( $expression =~ /^\d+$/ ) {
+    if ( $just_expand || $expression =~ /^\d+$/ ) {
 	$val = $expression
     } else {
 	#
@@ -2602,7 +2602,7 @@ sub process_compiler_directive( $$$$ ) {
 
     print "CD===> $line\n" if $debug;
 
-    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*)(.*)$/i;
+    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+)(.*)$/i;
 
     my ($keyword, $expression) = ( uc $1, $2 );
 
@@ -2620,7 +2620,7 @@ sub process_compiler_directive( $$$$ ) {
     my %directives =
 	( IF => sub() {
 	    directive_error( "Missing IF expression" , $filename, $linenumber ) unless supplied $expression;
-	    my $nextomitting = $omitting || ! evaluate_expression( $expression , $filename, $linenumber );
+	    my $nextomitting = $omitting || ! evaluate_expression( $expression , $filename, $linenumber , 0 );
 	    push @ifstack, [ 'IF', $omitting, ! $nextomitting, $linenumber ];
 	    $omitting = $nextomitting;
 	  } ,
@@ -2632,7 +2632,7 @@ sub process_compiler_directive( $$$$ ) {
 		  #
 		  # We can only change to including if we were previously omitting
 		  #
-		  $omitting = $prioromit || ! evaluate_expression( $expression , $filename, $linenumber );
+		  $omitting = $prioromit || ! evaluate_expression( $expression , $filename, $linenumber, 0 );
 		  $included = ! $omitting;
 	      } else {
 		  #
@@ -2671,12 +2671,14 @@ sub process_compiler_directive( $$$$ ) {
 		      directive_error( "Shorewall variables may only be SET in the body of an action", $filename, $linenumber ) unless $actparms{0};
 		      my $val = $actparms{$var} = evaluate_expression ( $expression,
 									$filename,
-									$linenumber );
+									$linenumber,
+									0  );
 		      $parmsmodified = PARMSMODIFIED;
 		  } else {
 		      $variables{$2} = evaluate_expression( $expression,
 							    $filename,
-							    $linenumber );
+							    $linenumber,
+							    0 );
 		  }
 	      }
 	  } ,
@@ -2736,8 +2738,16 @@ sub process_compiler_directive( $$$$ ) {
 		      directive_error ( "?COMMENT is not allowed in this file", $filename, $linenumber );
 		  }
 	      }
-	  }
+	  } ,
 
+	  ERROR => sub() {
+	      directive_error( evaluate_expression( $expression ,
+						    $filename ,
+						    $linenumber ,
+						    1 ) ,
+			       $filename ,
+			       $linenumber ) unless $omitting;
+	  }
 	);
 
     if ( my $function = $directives{$keyword} ) {
@@ -2793,6 +2803,11 @@ sub copy( $ ) {
 		print $script $_;
 		print $script "\n";
 		$lastlineblank = 0;
+
+		if ( $debug ) {
+		    s/\n/\nGS-----> /g;
+		    print "GS-----> $_\n";
+		}
 	    }
 	}
 
@@ -3421,17 +3436,17 @@ sub handle_first_entry() {
 sub read_a_line($) {
     my $options = $_[0];
 
+  LINE:
     while ( $currentfile ) {
-
 	$currentline = '';
 	$currentlinenumber = 0;
 
 	while ( <$currentfile> ) {
 	    chomp;
 	    #
-	    # Handle conditionals
+	    # Handle directives
 	    #
-	    if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT)/i ) {
+	    if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR)/i ) {
 		$omitting = process_compiler_directive( $omitting, $_, $currentfilename, $. );
 		next;
 	    }
@@ -3445,7 +3460,7 @@ sub read_a_line($) {
 	    #
 	    # Suppress leading whitespace in certain continuation lines
 	    #
-	    s/^\s*// if $currentline =~ /[,:]$/ && $options & CONFIG_CONTINUATION;
+	    s/^\s*// if $currentline && $options & CONFIG_CONTINUATION && $currentline =~ /[,:]$/;
 	    #
 	    # If this is a continued line with a trailing comment, remove comment. Note that
 	    # the result will now end in '\'.
@@ -3456,19 +3471,20 @@ sub read_a_line($) {
 	    #
 	    chop $currentline, next if ($currentline .= $_) =~ /\\$/;
 	    #
+	    # We now have a (possibly concatenated) line
 	    # Must check for shell/perl before doing variable expansion
 	    # 
 	    if ( $options & EMBEDDED_ENABLED ) {
-		if ( $currentline =~ s/^\s*\??(BEGIN\s+)SHELL\s*;?//i || $currentline =~ s/^\s*\?SHELL\s*//i || $currentline =~ s/^\s*SHELL\s+// ) {
-		    handle_first_entry if $first_entry;
-		    embedded_shell( $1 );
-		    next;
-		}
-
 		if ( $currentline =~ s/^\s*\??(BEGIN\s+)PERL\s*;?//i || $currentline =~ s/^\s*\??PERL\s*//i ) {
 		    handle_first_entry if $first_entry;
 		    embedded_perl( $1 );
-		    next;
+		    next LINE;
+		}
+
+		if ( $currentline =~ s/^\s*\??(BEGIN\s+)SHELL\s*;?//i || $currentline =~ s/^\s*\?SHELL\s*//i || $currentline =~ s/^\s*SHELL\s+// ) {
+		    handle_first_entry if $first_entry;
+		    embedded_shell( $1 );
+		    next LINE;
 		}
 	    }
 	    #
@@ -3480,7 +3496,7 @@ sub read_a_line($) {
 		#
 		# Ignore (concatinated) blank lines
 		#
-		$currentline = '', $currentlinenumber = 0, next if $currentline =~ /^\s*$/;
+		next LINE if $currentline =~ /^\s*$/;
 		#
 		# Eliminate trailing whitespace
 		#
@@ -3511,18 +3527,16 @@ sub read_a_line($) {
 		    push_include;
 		    $currentfile = undef;
 		    do_open_file $filename;
-		} else {
-		    $currentlinenumber = 0;
 		}
 
-		$currentline = '';
+		next LINE;
-            } elsif ( ( $options & DO_SECTION ) && $currentline =~ /^\s*\?SECTION\s+(.*)/i ) {
+	    } elsif ( ( $options & DO_SECTION ) && $currentline =~ /^\s*\?SECTION\s+(.*)/i ) {
-                my $sectionname = $1;
+		my $sectionname = $1;
-                fatal_error "Invalid SECTION name ($sectionname)" unless $sectionname =~ /^[-_\da-zA-Z]+$/;
+		fatal_error "Invalid SECTION name ($sectionname)" unless $sectionname =~ /^[-_\da-zA-Z]+$/;
-                fatal_error "This file does not allow ?SECTION" unless $section_function;
+		fatal_error "This file does not allow ?SECTION" unless $section_function;
-                $section_function->($sectionname);
+		$section_function->($sectionname);
-                $directive_callback->( 'SECTION', $currentline ) if $directive_callback;
+		$directive_callback->( 'SECTION', $currentline ) if $directive_callback;
-                $currentline = '';
+		next LINE;
 	    } else {
 		fatal_error "Non-ASCII gunk in file" if ( $options && CHECK_GUNK ) && $currentline =~ /[^\s[:print:]]/;
 		print "IN===> $currentline\n" if $debug;

Shorewall/Perl/Shorewall/Misc.pm

@@ -641,6 +641,7 @@ sub create_docker_rules() {
 	add_ijump( $chainref, j => 'DOCKER', o => 'docker0' );
 	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => '! docker0' );
 	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => 'docker0' ) if $dockerref->{options}{routeback};
+	add_ijump( $filter_table->{OUTPUT}, j => 'DOCKER' );
 	decr_cmd_level( $chainref );
 	add_commands( $chainref, 'fi' );
     }

Shorewall/Perl/Shorewall/Nat.pm

@@ -69,6 +69,7 @@ sub process_one_masq1( $$$$$$$$$$$ )
     my $destnets = '';
     my $baserule = '';
     my $inlinematches = '';
+    my $prerule       = '';
     #
     # Leading '+'
     #
@@ -83,6 +84,13 @@ sub process_one_masq1( $$$$$$$$$$$ )
 	$inlinematches = get_inline_matches(0);
     }	
     #
+    # Handle early matches
+    #
+    if ( $inlinematches =~ s/s*\+// ) {
+	$prerule = $inlinematches;
+	$inlinematches = '';
+    }
+    #
     # Parse the remaining part of the INTERFACE column
     #
     if ( $family == F_IPV4 ) {
@@ -336,7 +344,7 @@ sub process_one_masq1( $$$$$$$$$$$ )
 	#
 	expand_rule( $chainref ,
 		     POSTROUTE_RESTRICT ,
-		     '' ,
+		     $prerule ,
 		     $baserule . $inlinematches . $rule ,
 		     $networks ,
 		     $destnets ,

Shorewall/action.DNSAmp

@@ -30,4 +30,4 @@
 
 DEFAULTS DROP
 
-IPTABLES(@1)	-	-	udp	53	; -m u32 --u32 "0>>22&0x3C\@8&0xffff=0x0100 && 0>>22&0x3C\@12&0xffff0000=0x00010000"
+@1	-	-	udp	53	;; -m u32 --u32 "0>>22&0x3C\@8&0xffff=0x0100 && 0>>22&0x3C\@12&0xffff0000=0x00010000"

Shorewall/action.Drop

@@ -28,30 +28,16 @@
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 #
 ###############################################################################
-#
-# The following magic provides different defaults for @2 thru @5, when @1 is
-# 'audit'.
-#
-?begin perl;
-use Shorewall::Config;
-
-my ( $p1, $p2, $p3 , $p4, $p5 ) = get_action_params( 5 );
-
-if ( defined $p1 ) {
-    if ( $p1 eq 'audit' ) {
-	set_action_param( 3, 'A_DROP')     unless supplied $p3;
-	set_action_param( 4, 'A_ACCEPT' )  unless supplied $p4;
-	set_action_param( 5, 'A_DROP' )    unless supplied $p5;
-    } else {
-	fatal_error "Invalid value ($p1) for first Drop parameter" if supplied $p1;
-    }
-}
-
-1;
-
-?end perl;
 
+?if @1 ne '' && @1 ne '-'
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP
+    ?else
+        ?error The first parameter to Drop must be 'audit' or '-'
+    ?endif
+?else
 DEFAULTS -,-,DROP,ACCEPT,DROP
+?endif
 
 #TARGET		SOURCE	DEST	PROTO	DPORT	SPORT
 #

Shorewall/action.GlusterFS

@@ -11,20 +11,11 @@
 
 DEFAULTS 2,0
 
-?begin perl
+?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
-
+?error Invalid value for Bricks (@1)
-use Shorewall::Config qw(:DEFAULT :internal);
+?elsif @2 !~ /^[01]$/
-use Shorewall::Chains;
+?error Invalid value for IB (@2)
-use Shorewall::Rules;
+?endif
-use strict;
-
-my ( $bricks, $ib ) = get_action_params( 2 );
-
-fatal_error "Invalid value for Bricks ( $bricks )" unless $bricks =~ /^\d+$/ && $bricks > 1 && $bricks < 1024;
-fatal_error "Invalid value for IB ( $ib )" unless $ib =~ /^[01]$/;
-
-?end perl
-
 
 #ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME         HEADERS         SWITCH        HELPER
 #							PORT	PORT(S)		DEST		LIMIT		GROUP

Shorewall/action.NotSyn

@@ -43,7 +43,7 @@ my ( $action, $audit ) = get_action_params( 2 );
 if ( supplied $audit ) {
      fatal_error "Invalid parameter ($audit) to action NotSyn" if $audit ne 'audit';
      $action = "A_$action";
-}    
+}
 
 perl_action_tcp_helper( $action, '-p 6 ! --syn' );
 

Shorewall/action.RST

@@ -41,7 +41,7 @@ my ( $action, $audit ) = get_action_params( 2 );
 if ( supplied $audit ) {
      fatal_error "Invalid parameter ($audit) to action RST" if $audit ne 'audit';
      $action = "A_$action";
-}    
+}
 
 perl_action_tcp_helper( $action, '-p 6 --tcp-flags RST RST' );
 

Shorewall/action.Reject

@@ -27,30 +27,16 @@
 #
 # IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
 ###############################################################################
-#
-# The following magic provides different defaults for @2 thru @5, when @1 is
-# 'audit'.
-#
-?begin perl;
-use Shorewall::Config;
-
-my ( $p1, $p2, $p3 , $p4, $p5 ) = get_action_params( 5 );
-
-if ( defined $p1 ) {
-    if ( $p1 eq 'audit' ) {
-	set_action_param( 3, 'A_REJECT')  unless supplied $p3;
-	set_action_param( 4, 'A_ACCEPT' ) unless supplied $p4;
-	set_action_param( 5, 'A_DROP' )   unless supplied $p5;
-    } else {
-	fatal_error "Invalid value ($p1) for first Reject parameter" if supplied $p1;
-    }
-}
-
-1;
-
-?end perl;
 
+?if @1 ne '' && @1 ne '-'
+    ?if @1 eq 'audit'
+DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP
+    ?else
+	?error The first parameter to Reject must be 'audit' or '-'
+    ?endif
+?else
 DEFAULTS -,-,REJECT,ACCEPT,DROP
+?endif
 
 #TARGET		SOURCE	DEST	PROTO
 #

Shorewall/action.SetEvent

@@ -12,11 +12,6 @@
 #
 # For additional information, see http://www.shorewall.net/Events.html
 #
-#######################################################################################################
-#                                         DO NOT REMOVE THE FOLLOWING LINE
-#################################################################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DEST	SOURCE		ORIGINAL	RATE		USER/	MARK	CONNLIMIT	TIME         HEADERS         SWITCH        HELPER
-#							PORT	PORT(S)		DEST		LIMIT		GROUP
 
 DEFAULTS -,ACCEPT,src
 

Shorewall/action.TCPFlags

@@ -12,28 +12,21 @@
 
 DEFAULTS -
 
-?begin perl;
+?if @1 ne '' && @1 ne '-'
-use strict;
+    ?if @1 eq 'audit'
-use Shorewall::Config qw(:DEFAULT F_IPV4 F_IPV6);
+        ?set tcpflags_action 'A_DROP'
-use Shorewall::Chains;
+    ?else
-use Shorewall::Rules;
+	?error The parameter to TCPFlags must be 'audit' or '-'
+    ?endif
+?else
+    ?set tcpflags_action 'DROP'
+?endif
 
-my $action = 'DROP';
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL FIN,URG,PSH
-
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL NONE
-my ( $audit ) = get_action_params( 1 );
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,RST SYN,RST
-
+$tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,FIN SYN,FIN
-if ( supplied $audit ) {
+$tcpflags_action	-	-	;;+ -p tcp --syn --sport 0
-     fatal_error "Invalid parameter ($audit) to action TCPFlags" if $audit ne 'audit';
-     $action = "A_DROP";
-}    
-
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags ALL FIN,URG,PSH' );
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags ALL NONE' );
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags SYN,RST SYN,RST' );
-perl_action_tcp_helper( $action, '-p tcp --tcp-flags SYN,FIN SYN,FIN' );
-perl_action_tcp_helper( $action, '-p tcp --syn --sport 0' );
-
-?end perl;
 
 
 

Shorewall/action.mangletemplate

@@ -0,0 +1,22 @@
+#
+# Shorewall version 5 - Mangle Action Template
+#
+# /etc/shorewall/action.mangletemplate
+#
+#	This file is a template for files with names of the form
+#	/etc/shorewall/action.<action-name> where <action> is an
+#	ACTION defined with the mangle option in /etc/shorewall/actions.
+#
+#	To define a new action:
+#
+#	1. Add the <action name> to /etc/shorewall/actions with the mangle option
+#	2. Copy this file to /etc/shorewall/action.<action name>
+#	3. Add the desired rules to that file.
+#
+#	Please see http://shorewall.net/Actions.html for additional
+#	information.
+#
+# Columns are the same as in /etc/shorewall/mangle.
+#
+####################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	USER	TEST	LENGTH	TOS	CONNBYTES	HELPER	PROBABILITY	DSCP

Shorewall/lib.cli-std

@@ -470,11 +470,15 @@ compiler() {
 	    [ -n "$g_doing" ] && progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
 	    ;;
     esac
+    #
+    # Only use the pager if 'trace' or -r was specified and -d was not
+    #
+    [ "$g_debugging" != trace -a -z "$g_preview" ] || [ -n "$g_debug" ] && g_pager=
 
     if [ ${PERLLIBDIR} = ${LIBEXECDIR}/shorewall ]; then
-	$PERL $debugflags $pc $options $@
+	eval $PERL $debugflags $pc $options $@ $g_pager
     else
-	PERL5LIB=${PERLLIBDIR} $PERL $debugflags $pc $options $@
+	eval PERL5LIB=${PERLLIBDIR} $PERL $debugflags $pc $options $@ $g_pager
     fi
 
     status=$?

Shorewall/manpages/shorewall-actions.xml

@@ -118,6 +118,18 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>mangle</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7. Specifies that this action is
+                to be used in <ulink
+                url="shorewall-mangle.html">shorewall-mangle(5)</ulink> rather
+                than <ulink
+                url="shorewall-rules.html">shorewall-rules(5)</ulink>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term>noinline</term>
 

Shorewall/manpages/shorewall-mangle.xml

@@ -68,8 +68,9 @@
         <replaceable>command</replaceable>[(<replaceable>parameters</replaceable>)][:<replaceable>chain-designator</replaceable>]</term>
 
         <listitem>
-          <para>The chain-specifier indicates the Netfilter chain that the
+          <para>The <replaceable>chain-designator </replaceable>indicates the
-          entry applies to and may be one of the following:</para>
+          Netfilter chain that the entry applies to and may be one of the
+          following:</para>
 
           <variablelist>
             <varlistentry>
@@ -111,10 +112,14 @@
           url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>, and
           FORWARD when MARK_IN_FORWARD_CHAIN=Yes.</para>
 
-          <para>A chain-designator may not be specified if the SOURCE or DEST
+          <para>A <replaceable>chain-designator</replaceable> may not be
-          columns begin with '$FW'. When the SOURCE is $FW, the generated rule
+          specified if the SOURCE or DEST columns begin with '$FW'. When the
-          is always placed in the OUTPUT chain. If DEST is '$FW', then the
+          SOURCE is $FW, the generated rule is always placed in the OUTPUT
-          rule is placed in the INPUT chain.</para>
+          chain. If DEST is '$FW', then the rule is placed in the INPUT chain.
+          Additionally, a <replaceable>chain-designator</replaceable> may not
+          be specified in an action body unless the action is declared as
+          <option>inline</option> in <ulink
+          url="shorewall6-actions.html">shorewall-actions</ulink>(5).</para>
 
           <para>Where a command takes parameters, those parameters are
           enclosed in parentheses ("(....)") and separated by commas.</para>
@@ -123,6 +128,21 @@
           following.</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis
+              role="bold"><replaceable>action</replaceable>[([<replaceable>param</replaceable>[,...])]</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7.
+                <replaceable>action</replaceable> must be an action declared
+                with the <option>mangle</option> option in <ulink
+                url="manpages/shorewall-actions.html">shorewall-actions(5)</ulink>.
+                If the action accepts paramaters, they are specified as a
+                comma-separated list within parentheses following the
+                <replaceable>action</replaceable> name.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>
@@ -720,33 +740,6 @@ Normal-Service       =&gt; 0x00</programlisting>
               </listitem>
             </varlistentry>
           </variablelist>
-
-          <orderedlist numeration="arabic">
-            <listitem>
-              <para><emphasis role="bold">TTL</emphasis>([<emphasis
-              role="bold">-</emphasis>|<emphasis
-              role="bold">+</emphasis>]<replaceable>number</replaceable>)</para>
-
-              <para>Added in Shorewall 4.4.24.</para>
-
-              <para>Prior to Shorewall 4.5.7.2, may be optionally followed by
-              <emphasis role="bold">:F</emphasis> but the resulting rule is
-              always added to the FORWARD chain. Beginning with Shorewall
-              4.5.7.s, it may be optionally followed by <emphasis
-              role="bold">:P</emphasis>, in which case the rule is added to
-              the PREROUTING chain.</para>
-
-              <para>If <emphasis role="bold">+</emphasis> is included, packets
-              matching the rule will have their TTL incremented by
-              <replaceable>number</replaceable>. Similarly, if <emphasis
-              role="bold">-</emphasis> is included, matching packets have
-              their TTL decremented by <replaceable>number</replaceable>. If
-              neither <emphasis role="bold">+</emphasis> nor <emphasis
-              role="bold">-</emphasis> is given, the TTL of matching packets
-              is set to <replaceable>number</replaceable>. The valid range of
-              values for <replaceable>number</replaceable> is 1-255.</para>
-            </listitem>
-          </orderedlist>
         </listitem>
       </varlistentry>
 

Shorewall6/action.mangletemplate

@@ -0,0 +1,22 @@
+#
+# Shorewall version 5 - Mangle Action Template
+#
+# /etc/shorewall6/action.mangletemplate
+#
+#	This file is a template for files with names of the form
+#	/etc/shorewall/action.<action-name> where <action> is an
+#	ACTION defined with the mangle option in /etc/shorewall/actions.
+#
+#	To define a new action:
+#
+#	1. Add the <action name> to /etc/shorewall6/actions with the mangle option
+#	2. Copy this file to /etc/shorewall6/action.<action name>
+#	3. Add the desired rules to that file.
+#
+#	Please see http://shorewall.net/Actions.html for additional
+#	information.
+#
+# Columns are the same as in /etc/shorewall6/mangle.
+#
+############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	USER	TEST	LENGTH	TOS	CONNBYTES	HELPER	HEADERS	PROBABILITY	DSCP

Shorewall6/manpages/shorewall6-actions.xml

@@ -119,6 +119,18 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>mangle</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7. Specifies that this action is
+                to be used in <ulink
+                url="shorewall6-mangle.html">shorewall6-mangle(5)</ulink>
+                rather than <ulink
+                url="shorewall6-rules.html">shorewall6-rules(5)</ulink>.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term>noinline</term>
 

Shorewall6/manpages/shorewall6-mangle.xml

@@ -69,8 +69,9 @@
         <replaceable>command</replaceable>[(<replaceable>parameters</replaceable>)][:<replaceable>chain-designator</replaceable>]</term>
 
         <listitem>
-          <para>The chain-specifier indicates the Netfilter chain that the
+          <para>The <replaceable>chain-designator</replaceable> indicates the
-          entry applies to and may be one of the following:</para>
+          Netfilter chain that the entry applies to and may be one of the
+          following:</para>
 
           <variablelist>
             <varlistentry>
@@ -112,10 +113,14 @@
           url="/manpages6/shorewall6.conf.html">shorewall6.conf(5)</ulink>,
           and FORWARD when MARK_IN_FORWARD_CHAIN=Yes.</para>
 
-          <para>A chain-designator may not be specified if the SOURCE or DEST
+          <para>A <replaceable>chain-designator</replaceable> may not be
-          columns begin with '$FW'. When the SOURCE is $FW, the generated rule
+          specified if the SOURCE or DEST columns begin with '$FW'. When the
-          is always placed in the OUTPUT chain. If DEST is '$FW', then the
+          SOURCE is $FW, the generated rule is always placed in the OUTPUT
-          rule is placed in the INPUT chain.</para>
+          chain. If DEST is '$FW', then the rule is placed in the INPUT chain.
+          Additionally, a <replaceable>chain-designator</replaceable> may not
+          be specified in an action body unless the action is declared as
+          <option>inline</option> in <ulink
+          url="shorewall6-actions.html">shorewall6-actions</ulink>(5).</para>
 
           <para>Where a command takes parameters, those parameters are
           enclosed in parentheses ("(....)") and separated by commas.</para>
@@ -124,6 +129,21 @@
           following.</para>
 
           <variablelist>
+            <varlistentry>
+              <term><emphasis
+              role="bold"><replaceable>action</replaceable>[([<replaceable>param</replaceable>[,...])]</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.7.
+                <replaceable>action</replaceable> must be an action declared
+                with the <option>mangle</option> option in <ulink
+                url="manpages6/shorewall6-actions.html">shorewall6-actions(5)</ulink>.
+                If the action accepts paramaters, they are specified as a
+                comma-separated list within parentheses following the
+                <replaceable>action</replaceable> name.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>

docs/Actions.xml

@@ -32,6 +32,8 @@
 
       <year>2013</year>
 
+      <year>2015-2016</year>
+
       <holder>Thomas M. Eastep</holder>
     </copyright>
 
@@ -397,6 +399,27 @@ REDIRECT       net     -       tcp     80      -       1.2.3.4</programlisting>
       url="configuration_file_basics.htm#ActionVariables">Action Variables
       section</ulink> of the Configuration Basics article.</para>
     </section>
+
+    <section>
+      <title>Mangle Actions</title>
+
+      <para>Beginning with Shorewall 5.0.7, actions may be used in <ulink
+      url="manpages/shorewall-mangle.html">shorewall-mangle(5)</ulink> and
+      <ulink
+      url="manpages6/shorewall6-mangle.html">shorewall6-mangle(5)</ulink>.
+      Because the rules and mangle files have different column layouts,
+      actions can be defined to be used in one file or the other but not in
+      both. To designate an action to be used in the mangle file, specify the
+      <option>mangle</option> option in the action's entry in <ulink
+      url="manpages/shorewall-actions.html">shorewall-actions</ulink>(5) or
+      <ulink
+      url="manpages6/shorewall6-actions.html">shorewall6-actions</ulink>(5).</para>
+
+      <para>To create a mangle action, follow the steps in the preceding
+      section, but use the
+      <filename>/usr/share/shorewall/action.mangletemplate</filename> file.
+      </para>
+    </section>
   </section>
 
   <section id="Logging">

docs/configuration_file_basics.xml

@@ -2168,6 +2168,31 @@ SSH(ACCEPT)    net:$MYIP      $FW
 <lines to be included if all three expressions evaluate to false.
 
 ?ENDIF</programlisting>
+
+    <para>Beginning in Shorewall 5.0.7, an error can be raised using the
+    ?ERROR directive:</para>
+
+    <programlisting>?ERROR <replaceable>message</replaceable></programlisting>
+
+    <para>Variables in the message are evaluated and the result appears in a
+    standard Shorewall ERROR: message. </para>
+
+    <para>Example from the 5.0.7 action.GlusterFS:</para>
+
+    <programlisting>?if @1 !~ /^\d+/ || ! @1 || @1 &gt; 1024
+    ?error Invalid value for Bricks (@1)
+?elsif @2 !~ /^[01]$/
+    ?error Invalid value for IB (@2)
+?endif
+</programlisting>
+
+    <para>The above code insures that the first action paramater is a non-zero
+    number &lt;= 1024 and that the second parameter is either 0 or 1. If 2000
+    is passed for the first parameter, the following error message is
+    generated:</para>
+
+    <programlisting>   ERROR: Invalid value for Bricks (2000) /usr/share/shorewall/action.GlusterFS (line 15)
+      from /etc/shorewall/rules (line 45)</programlisting>
   </section>
 
   <section id="Embedded">