Make ipset-based dynamic blacklisting work in the FORWARD chain

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/lib.cli

@@ -731,12 +731,29 @@ list_zone() {
     done
 }
 
+option_error() {
+    fatal_error "The $COMMAND command does not accept this option: -$1"
+}
+
+too_many_arguments() {
+    fatal_error "Too many arguments: $1"
+}
+
+missing_argument() {
+    fatal_error "Missing argument"
+}
+
+missing_option_value() {
+    fatal_error "The $1 option requires a value"
+}
+
 version_command() {
     local finished
     finished=0
     local all
     all=
     local product
+    local compiletime
 
     while [ $finished -eq 0 -a $# -gt 0 ]; do
 	option=$1
@@ -755,7 +772,7 @@ version_command() {
 			    option=${option#a}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -767,7 +784,7 @@ version_command() {
 	esac
     done
 
-    [ $# -gt 0 ] && usage 1
+    [ $# -gt 0 ] && too_many_arguments
 
     if [ -n "$all" ]; then
 	echo "shorewall-core: $(cat ${SHAREDIR}/shorewall/coreversion)"
@@ -779,8 +796,16 @@ version_command() {
 	done
 
 	if [ "$(id -u)" -eq 0 -a -f $g_firewall ]; then
-	    echo $g_echo_n "$g_firewall was compiled by Shorewall version "
+	    compiletime=$(run_it $g_firewall info 2>/dev/null)
-	    $g_firewall version
+
+	    case $compiletime in
+		compiled\ *)
+		    echo "$g_firewall was $compiletime"
+		    ;;
+		*)
+		    echo "$g_firewall was compiled by Shorewall version $(run_it $g_firewall version))"
+		    ;;
+	    esac
 	fi
     else
 	echo $SHOREWALL_VERSION
@@ -1065,7 +1090,7 @@ show_connections() {
 	    shift
 	    conntrack -f ipv4 -L $@ | show_connections_filter
 	else
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments
 	    if [ -f /proc/net/ip_conntrack ]; then
 		cat /proc/net/ip_conntrack | show_connections_filter
 	    else
@@ -1078,7 +1103,7 @@ show_connections() {
 	echo
 	conntrack -f ipv6 -L $@ | show_connections_filter
     else
-	[ $# -gt 1 ] && usage 1
+	[ $# -gt 1 ] && too_many_arguments
 	if [ -f /proc/sys/net/netfilter/nf_conntrack_count -a -f /proc/sys/net/nf_conntrack ]; then
 	    local count=$(cat /proc/sys/net/netfilter/nf_conntrack_count)
 	    local max=$(cat /proc/sys/net/netfilter/nf_conntrack_max)
@@ -1199,7 +1224,7 @@ show_command() {
 			    option=${option#f}
 			    ;;
 			t)
-			    [ $# -eq 1 ] && usage 1
+			    [ $# -eq 1 ] && missing_option_value -t
 
 			    case $2 in
 				mangle|nat|filter|raw|rawpost)
@@ -1227,7 +1252,7 @@ show_command() {
 			    option=${option#b}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1249,37 +1274,37 @@ show_command() {
 	    eval show_connections $@ $g_pager
 	    ;;
 	nat)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_nat $g_pager
 	    ;;
 	raw)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_raw $g_pager
 	    ;;
 	rawpost)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_rawpost $g_pager
 	    ;;
 	tos|mangle)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_mangle $g_pager
 	    ;;
 	log)
-	    [ $# -gt 2 ] && usage 1
+	    [ $# -gt 2 ] && too_many_arguments $2
 
 	    setup_logread
 	    eval show_log $g_pager
 	    ;;
 	tc)
-	    [ $# -gt 2 ] && usage 1
+	    [ $# -gt 2 ] && too_many_arguments $2
 	    eval show_tc $@ $g_pager
 	    ;;
 	classifiers|filters)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_classifiers_command $g_pager
 	    ;;
 	zones)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    if [ -f ${VARDIR}/zones ]; then
 		echo "$g_product $SHOREWALL_VERSION Zones at $g_hostname - $(date)"
 		echo
@@ -1302,7 +1327,7 @@ show_command() {
 	    fi
 	    ;;
 	capabilities)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    determine_capabilities
 	    VERBOSITY=2
 	    if [ -n "$g_filemode" ]; then
@@ -1312,11 +1337,11 @@ show_command() {
 	    fi
 	    ;;
 	ip)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_ip_addresses $g_pager
 	    ;;
 	routing)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_routing_command $g_pager
 	    ;;
 	config)
@@ -1345,26 +1370,26 @@ show_command() {
 	    echo $VARDIR;
 	    ;;
 	policies)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_policies $g_pager
 	    ;;
 	ipa)
-	    [ $g_family -eq 4 ] || usage 1
+	    [ $g_family -eq 4 ] || fatal_error "'show ipa' is now available in $g_product"
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_ipa $g_pager
 	    ;;
 	marks)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    echo "$g_product $SHOREWALL_VERSION Mark Layout at $g_hostname - $(date)"
 	    echo
 	    [ -f ${VARDIR}/marks ] && cat ${VARDIR}/marks;
 	    ;;
 	nfacct)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_nfacct_command $g_pager
 	    ;;
 	arptables)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    resolve_arptables
 	    if [ -n "$arptables" -a -x $arptables ]; then
 		eval show_arptables $g_pager
@@ -1373,22 +1398,22 @@ show_command() {
 	    fi
 	    ;;
 	event)
-	    [ $# -gt 1 ] || usage 1
+	    [ $# -gt 1 ] || too_many_arguments $2
 	    echo "$g_product $SHOREWALL_VERSION events at $g_hostname - $(date)"
 	    echo
 	    shift
 	    show_events $@
 	    ;;
 	events)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_events_command $g_pager
 	    ;;
 	bl|blacklists)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    eval show_blacklists $g_pager
 	    ;;
 	opens)
-	    [ $# -gt 1 ] && usage 1
+	    [ $# -gt 1 ] && too_many_arguments $2
 	    echo "$g_product $SHOREWALL_VERSION Temporarily opened connections at $g_hostname - $(date)"
 
 	    if chain_exists dynamic; then
@@ -1404,12 +1429,12 @@ show_command() {
 	    	*)
 		    case $1 in
 			actions)
-			    [ $# -gt 1 ] && usage 1
+			    [ $# -gt 1 ] && too_many_arguments $2
 			    eval show_actions_sorted $g_pager
 			    return
 			    ;;
 			macro)
-			    [ $# -ne 2 ] && usage 1
+			    [ $# -ne 2 ] && too_many_arguments $2
 			    for directory in $(split $CONFIG_PATH); do
 				if [ -f ${directory}/macro.$2 ]; then
 				    echo "Shorewall $SHOREWALL_VERSION Macro $2 at $g_hostname - $(date)"
@@ -1421,7 +1446,7 @@ show_command() {
 			    return
 			    ;;
 			macros)
-			    [ $# -gt 1 ] && usage 1
+			    [ $# -gt 1 ] && too_many_arguments $2
 			    eval show_macros $g_pager
 			    return
 			    ;;
@@ -1432,7 +1457,7 @@ show_command() {
 	    if [ $# -gt 0 ]; then
 		if [ $1 = dynamic -a $# -gt 1 ]; then
 		    shift
-		    [ $# -eq 1 ] || usage 1
+		    [ $# -eq 1 ] || too_many_arguments $2
 		    list_zone $1
 		    return;
                 fi
@@ -1507,6 +1532,49 @@ dump_filter_wrapper() {
     eval dump_filter $g_pager
 }
 
+show_status() {
+    local compiletime
+    local state
+
+    if product_is_started ; then
+	[ $VERBOSITY -ge 1 ] && echo "$g_product is running"
+	status=0
+    else
+	[ $VERBOSITY -ge 1 ] && echo "$g_product is stopped"
+	status=4
+    fi
+
+    if [ -f ${VARDIR}/state ]; then
+	state="$(cat ${VARDIR}/state)"
+	case $state in
+	    Stopped*|Closed*|Clear*)
+		status=3
+		;;
+	esac
+    else
+	state=Unknown
+    fi
+
+    if [ $VERBOSITY -ge 1 ]; then 
+	if [ -f $g_firewall ]; then
+	    compiletime=$(run_it $g_firewall info 2>/dev/null)
+
+	    case $compiletime in
+		compiled\ *)
+		    state="$state ($g_firewall $compiletime)"
+		    ;;
+		*)
+		    state="$state ($g_firewall compiled by Shorewall version $(run_it $g_firewall version))"
+		    ;;
+	    esac
+	fi
+
+	echo "State:$state"
+	echo
+    fi
+
+}
+
 #
 # Dump Command Executor
 #
@@ -1546,7 +1614,7 @@ do_dump_command() {
 			    option=${option#c}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1565,7 +1633,7 @@ do_dump_command() {
     [ $VERBOSITY -lt 2 ] && VERBOSITY=2
 
     [ -n "$g_debugging" ] && set -x
-    [ $# -eq 0 ] || usage 1
+    [ $# -eq 0 ] || too_many_arguments $1
     clear_term
     echo "$g_product $SHOREWALL_VERSION Dump at $g_hostname - $(date)"
     echo
@@ -1760,7 +1828,7 @@ restore_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error
 			    ;;
 		    esac
 		done
@@ -1780,7 +1848,7 @@ restore_command() {
 	validate_restorefile '<restore file>'
 	;;
     *)
-	usage 1
+	too_many_arguments $2
 	;;
     esac
 
@@ -2386,7 +2454,7 @@ hits_command() {
 			    option=${option#t}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -2398,7 +2466,7 @@ hits_command() {
 	esac
     done
 
-    [ $# -eq 0 ] || usage 1
+    [ $# -eq 0 ] || too_many_arguments $1
 
     clear_term
     echo "$g_product $SHOREWALL_VERSION Hits at $g_hostname - $(date)"
@@ -2455,7 +2523,7 @@ hits_command() {
 #
 allow_command() {
     [ -n "$g_debugging" ] && set -x
-    [ $# -eq 1 ] && usage 1
+    [ $# -eq 1 ] && missing_argument
     if product_is_started ; then
 	local which
 	which='-s'
@@ -2525,8 +2593,6 @@ logwatch_command() {
 	    -*)
 		option=${option#-}
 
-		[ -z "$option" ] && usage 1
-
 		while [ -n "$option" ]; do
 		    case $option in
 			v*)
@@ -2546,7 +2612,7 @@ logwatch_command() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -2565,7 +2631,7 @@ logwatch_command() {
     elif [ $# -eq 0 ]; then
 	logwatch 30
     else
-	usage 1
+	too_many_arguments $2
     fi
 }
 
@@ -3309,36 +3375,6 @@ report_capabilities1() {
     report_capabilities_unsorted1 | sort
 }
 
-show_status() {
-    if product_is_started ; then
-	[ $VERBOSITY -ge 1 ] && echo "$g_product is running"
-	status=0
-    else
-	[ $VERBOSITY -ge 1 ] && echo "$g_product is stopped"
-	status=4
-    fi
-
-    if [ -f ${VARDIR}/state ]; then
-	state="$(cat ${VARDIR}/state)"
-	case $state in
-	    Stopped*|Closed*|Clear*)
-		status=3
-		;;
-	esac
-    else
-	state=Unknown
-    fi
-
-    if [ $VERBOSITY -ge 1 ]; then 
-	if [ -f $g_firewall ]; then
-	    state="$state ($g_firewall compiled by Shorewall version $($g_firewall version))"
-	fi
-	echo "State:$state"
-	echo
-    fi
-
-}
-
 interface_status() {
     case $(cat $1) in
 	0)
@@ -3392,7 +3428,7 @@ status_command() {
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3404,7 +3440,7 @@ status_command() {
 	esac
     done
 
-    [ $# -eq 0 ] || usage 1
+    [ $# -eq 0 ] || missing_argument
 
     [ $VERBOSITY -ge 1 ] && echo "${g_product}-$SHOREWALL_VERSION Status at $g_hostname - $(date)" && echo
     show_status
@@ -3498,7 +3534,7 @@ save_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3518,7 +3554,7 @@ save_command() {
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
 	esac
 
@@ -3537,6 +3573,9 @@ save_command() {
 
 forget_command() {
     case $# in
+	0)
+	    missing_argument
+	    ;;
 	1)
 	    ;;
 	2)
@@ -3544,7 +3583,7 @@ forget_command() {
 	    validate_restorefile '<restore file>'
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -3566,7 +3605,7 @@ ipcalc_command() {
     local address
     local vlsm
 
-    [ $g_family -eq 6 ] && usage 1
+    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the ipcalc command"
 
     if [ $# -eq 2 ]; then
 	address=${2%/*}
@@ -3574,13 +3613,15 @@ ipcalc_command() {
     elif [ $# -eq 3 ]; then
 	address=$2
 	vlsm=$(ip_vlsm $3)
+    elif [ $# -eq 0 ]; then
+	missing_argument
     else
-	usage 1
+	too_many_arguments $4
     fi
 
     valid_address $address || fatal_error "Invalid IP address: $address"
-    [ -z "$vlsm" ] && usage 2
+    [ -z "$vlsm" ] && fatal_error "Missing VLSM"
-    [ "x$address" = "x$vlsm" ] && usage 2
+    [ "x$address" = "x$vlsm" ] && "Invalid VLSM"
     [ $vlsm -gt 32 ] && fatal_error "Invalid VLSM: /$vlsm"
 
     address=$address/$vlsm
@@ -3594,7 +3635,7 @@ ipcalc_command() {
 iprange_command() {
     local range
 
-    [ $g_family -eq 6 ] && usage 1
+    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the iprange command"
 
     range=''
 
@@ -3612,15 +3653,19 @@ iprange_command() {
 	    ip_range $range
 	    ;;
 	*)
-	    usage 1
+	    fatal_error "Invalid ip range: $range"
 	    ;;
     esac
 }
 
 ipdecimal_command() {
-    [ $# -eq 2 ] || usage 1
+    if [ $# eq 1 ]; then
+	missing_argument
+    else
+	[ $# -eq 2 ] || too_many_arguments $3
+    fi
 
-    [ $g_family -eq 6 ] && usage 1
+    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the iprange command"
 
     case $2 in
 	*.*.*.*)
@@ -3928,7 +3973,7 @@ start_command() {
 			    option=${option%p}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -3944,7 +3989,7 @@ start_command() {
 	0)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $1
 	    ;;
     esac
 
@@ -3988,7 +4033,7 @@ restart_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -4004,7 +4049,7 @@ restart_command() {
 	0)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $1
 	    ;;
     esac
 
@@ -4220,7 +4265,8 @@ shorewall_cli() {
 		while [ -n "$option" ]; do
 		    case $option in
 			c)
-			    [ $# -eq 1 -o -n "$g_lite" ] && usage 1
+			    [ $# -eq 1 ]     && missing_option_value -c
+			    [ -n "$g_lite" ] && fatal_error "$g_product does not support the -c option"
 
 			    if [ ! -d $2 ]; then
 				if [ -e $2 ]; then
@@ -4235,7 +4281,7 @@ shorewall_cli() {
 			    shift
 			    ;;
 			e*)
-			    [ -n "$g_lite" ] && usage 1
+			    [ -n "$g_lite" ] && fatal_error "$g_product does not support the -e option"
 			    g_export=Yes
 			    option=${option#e}
 			    ;;
@@ -4297,7 +4343,7 @@ shorewall_cli() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -4362,7 +4408,7 @@ shorewall_cli() {
 	    start_command $@
 	    ;;
 	stop|clear)
-	    [ $# -ne 1 ] && usage 1
+	    [ $# -ne 1 ] && too_many_arguments $2
 	    get_config
 	    [ -x $g_firewall ] || fatal_error "$g_product has never been started"
 	    [ -n "$g_nolock" ] || mutex_on
@@ -4419,7 +4465,7 @@ shorewall_cli() {
     	    dump_command $@
 	    ;;
 	hits)
-	    [ $g_family -eq 6 ] && usage 1
+	    [ $g_family -eq 6 ] && fatal_error "$g_product does not support the hits command"
 	    get_config Yes No Yes
 	    [ -n "$g_debugging" ] && set -x
 	    shift
@@ -4437,19 +4483,19 @@ shorewall_cli() {
 	drop)
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
-	    [ $# -eq 1 ] && usage 1
+	    [ $# -eq 1 ] && missing_argument
 	    drop_command $@
 	    ;;
 	logdrop)
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
-	    [ $# -eq 1 ] && usage 1
+	    [ $# -eq 1 ] && missing_argument
 	    logdrop_command $@
 	    ;;
 	reject|logreject)
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
-	    [ $# -eq 1 ] && usage 1
+	    [ $# -eq 1 ] && missing_argument
 	    reject_command $@
 	    ;;
 	open|close)
@@ -4514,6 +4560,11 @@ shorewall_cli() {
 		    # It's a shell function -- call it
 		    #
 		    $@
+		elif type $1 2> /dev/null | fgrep -q 'is a shell function'; then
+		    #
+		    # It's a shell function -- call it
+		    #
+		    $@
 		else
 		    #
 		    # It isn't a function visible to this script -- try
@@ -4522,7 +4573,7 @@ shorewall_cli() {
 		    run_it $g_firewall $g_debugging call $@
 		fi
 	    else
-		usage 1
+		missing_argument
 	    fi
 	    ;;
 	help)
@@ -4540,7 +4591,7 @@ shorewall_cli() {
 	    noiptrace_command $@
 	    ;;
 	savesets)
-	    [ $# -eq 1 ] || usage 1
+	    [ $# -eq 1 ] || too_many_arguments $2
 	    get_config
 	    [ -n "$g_debugging" ] && set -x
 	    savesets1
@@ -4549,7 +4600,7 @@ shorewall_cli() {
 	    if [ -z "$g_lite" ]; then
 		compiler_command $@
 	    else
-		usage 1
+		fatal_error "Invalid command: $COMMAND"
 	    fi
 	    ;;
     esac

Shorewall-core/lib.common

@@ -712,9 +712,9 @@ find_file()
 set_state () # $1 = state
 {
     if [ $# -gt 1 ]; then
-	echo "$1 ($(date)) from $2" > ${VARDIR}/state
+	echo "$1 $(date) from $2" > ${VARDIR}/state
     else
-	echo "$1 ($(date))" > ${VARDIR}/state
+	echo "$1 $(date)" > ${VARDIR}/state
     fi
 }
 
@@ -776,7 +776,7 @@ mutex_on()
 		error_message "WARNING: Stale lockfile ${lockf} removed"
 	    elif [ $lockpid -eq $$ ]; then
                 return 0
-	    elif ! qt ps p ${lockpid}; then
+	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
 	    fi
@@ -788,10 +788,8 @@ mutex_on()
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
 	elif qt mywhich lock; then
-            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
+            lock ${lockf}
-            chmod u+w ${lockf}
+            chmod u=r ${lockf}
-            echo $$ > ${lockf}
-            chmod u-w ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -813,6 +811,7 @@ mutex_on()
 #
 mutex_off()
 {
+    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
     rm -f ${LOCKFILE:=${VARDIR}/lock}
 }
 

Shorewall-core/uninstall.sh

@@ -117,6 +117,7 @@ fi
 echo "Uninstalling Shorewall Core $VERSION"
 
 rm -rf ${SHAREDIR}/shorewall
+rm -f ~/.shorewallrc
 
 echo "Shorewall Core Uninstalled"
 

Shorewall-init/install.sh

@@ -412,7 +412,7 @@ if [ $HOST = debian ]; then
 
     if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir ${DESTDIR}${ETC}/default
+	    mkdir -p ${DESTDIR}${ETC}/default
 	fi
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
@@ -572,9 +572,9 @@ if [ -z "$DESTDIR" ]; then
 		    cant_autostart
 		fi
 	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-		/etc/init.d/shorewall-inir enable
+		/etc/init.d/$PRODUCT enable
 		if /etc/init.d/shorewall-init enabled; then
-		    echo "Shorrewall Init will start automatically at boot"
+		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
 		fi
@@ -585,7 +585,7 @@ if [ -z "$DESTDIR" ]; then
     fi
 else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
-	if [ $HOST = debian ]; then
+	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d
 	    fi

Shorewall-lite/install.sh

@@ -495,7 +495,7 @@ done
 # Install the Man Pages
 #
 
-if [ -d manpages ]; then
+if [ -d manpages -a -n "$MANDIR" ]; then
     cd manpages
 
     mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
@@ -550,7 +550,7 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
-    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then

Shorewall/Perl/Shorewall/ARP.pm

@@ -244,7 +244,7 @@ sub create_arptables_load( $ ) {
 
     emit "exec 3>\${VARDIR}/.arptables-input";
 
-    my $date = localtime;
+    my $date = compiletime;
 
     unless ( $test ) {
 	emit_unindented '#';
@@ -294,7 +294,7 @@ sub create_arptables_load( $ ) {
 #
 sub preview_arptables_load() {
 
-    my $date = localtime;
+    my $date = compiletime;
 
     print "#\n# Generated by Shorewall $globals{VERSION} - $date\n#\n";
 

Shorewall/Perl/Shorewall/Chains.pm

@@ -8575,7 +8575,7 @@ sub create_netfilter_load( $ ) {
 
     enter_cat_mode;
 
-    my $date = localtime;
+    my $date = compiletime;
 
     unless ( $test ) {
 	emit_unindented '#';
@@ -8683,7 +8683,7 @@ sub preview_netfilter_load() {
 
     enter_cat_mode1;
 
-    my $date = localtime;
+    my $date = compiletime;
 
     print "#\n# Generated by Shorewall $globals{VERSION} - $date\n#\n";
 
@@ -8919,7 +8919,7 @@ sub create_stop_load( $ ) {
     enter_cat_mode;
 
     unless ( $test ) {
-	my $date = localtime;
+	my $date = compiletime;
 	emit_unindented '#';
 	emit_unindented "# Generated by Shorewall $globals{VERSION} - $date";
 	emit_unindented '#';

Shorewall/Perl/Shorewall/Compiler.pm

@@ -76,7 +76,7 @@ sub initialize_package_globals( $$$ ) {
 #
 # First stage of script generation.
 #
-#    Copy lib.core and lib.common to the generated script.
+#    Copy lib.runtime and lib.common to the generated script.
 #    Generate the various user-exit jacket functions.
 #
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
@@ -90,12 +90,12 @@ sub generate_script_1( $ ) {
 	if ( $test ) {
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall-perl\n#";
 	} else {
-	    my $date = localtime;
+	    my $date = compiletime;
 
 	    emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
 
-	    copy  $globals{SHAREDIRPL} . '/lib.core', 0;
+	    copy  $globals{SHAREDIRPL} . '/lib.runtime', 0;
-	    copy2 $globals{SHAREDIRPL} . '/lib.common', $debug;
+	    copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
 	}
 
     }
@@ -596,6 +596,21 @@ EOF
 
 }
 
+#
+# Generate info_command()
+#
+sub compile_info_command() {
+    my $date = compiletime;
+
+    emit( "\n",
+	  "#",
+	  "# Echo the date and time when this script was compiled along with the Shorewall version",
+	  "#",
+	  "info_command() {" ,
+	  qq(    echo "compiled $date by Shorewall version $globals{VERSION}") ,
+	  "}\n" );
+}   
+
 #
 #  The Compiler.
 #
@@ -922,6 +937,10 @@ sub compiler {
 	#
 	compile_updown;
 	#
+	# Echo the compilation time and date
+	#
+	compile_info_command unless $test;
+	#
 	# Copy the footer to the script
 	#
 	copy $globals{SHAREDIRPL} . 'prog.footer' unless $test;

Shorewall/Perl/Shorewall/Config.pm

@@ -84,6 +84,8 @@ our @EXPORT = qw(
 		 require_capability
 		 report_used_capabilities
 		 kernel_version
+
+                 compiletime
                 );
 
 our @EXPORT_OK = qw( $shorewall_dir initialize shorewall);
@@ -681,6 +683,8 @@ our %ipsets; # All required IPsets
 #
 our %filecache;
 
+our $compiletime;
+
 sub process_shorewallrc($$);
 sub add_variables( \% );
 #
@@ -737,7 +741,7 @@ sub initialize( $;$$) {
 		    TC_SCRIPT               => '',
 		    EXPORT                  => 0,
 		    KLUDGEFREE              => '',
-		    VERSION                 => "5.0.1",
+		    VERSION                 => "5.0.9-Beta2",
 		    CAPVERSION              => 50004 ,
 		    BLACKLIST_LOG_TAG       => '',
 		    RELATED_LOG_TAG         => '',
@@ -889,6 +893,7 @@ sub initialize( $;$$) {
 	  DOCKER => undef ,
 	  PAGER => undef ,
 	  MINIUPNPD => undef ,
+	  VERBOSE_MESSAGES => undef ,
 	  #
 	  # Packet Disposition
 	  #
@@ -1171,6 +1176,12 @@ sub initialize( $;$$) {
     %shorewallrc1 = %shorewallrc unless $shorewallrc1;
 
     add_variables %shorewallrc1;
+
+    $compiletime = `date`;
+
+    chomp $compiletime;
+
+    $compiletime =~ s/ +/ /g;
 }
 
 my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
@@ -1183,6 +1194,10 @@ sub all_ipsets() {
     sort keys %ipsets;
 }
 
+sub compiletime() {
+    $compiletime;
+}
+
 #
 # Create 'currentlineinfo'
 #
@@ -2543,18 +2558,54 @@ sub directive_error( $$$ ) {
     fatal_error $_[0];
 }
 
-sub directive_warning( $$$ ) {
+sub directive_warning( $$$$ ) {
-    my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
+    if ( shift ) {
-    ( my $warning, $currentfilename, $currentlinenumber ) = @_;
+	my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
-    warning_message $warning;
+	( my $warning, $currentfilename, $currentlinenumber ) = @_;
-    ( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+	warning_message $warning;
+	( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+    } else {
+	our @localtime;
+
+	handle_first_entry if $first_entry;
+
+	$| = 1; #Reset output buffering (flush any partially filled buffers).
+
+	if ( $log ) {
+	    @localtime = localtime;
+	    printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	    print $log  "   WARNING: $_[0]\n";
+	}
+
+	print STDERR "   WARNING: $_[0]\n";
+
+	$| = 0; #Re-allow output buffering
+    }
 }
 
-sub directive_info( $$$ ) {
+sub directive_info( $$$$ ) {
-    my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
+    if ( shift ) {
-    ( my $info, $currentfilename, $currentlinenumber ) = @_;
+	my ( $savefilename, $savelineno ) = ( $currentfilename, $currentlinenumber );
-    info_message $info;
+	( my $info, $currentfilename, $currentlinenumber ) = @_;
-    ( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+	info_message $info;
+	( $currentfilename, $currentlinenumber ) = ( $savefilename, $savelineno );
+    } else {
+	our @localtime;
+
+	handle_first_entry if $first_entry;
+
+	$| = 1; #Reset output buffering (flush any partially filled buffers).
+
+	if ( $log ) {
+	    @localtime = localtime;
+	    printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
+	    print $log  "   INFO: $_[0]\n";
+	}
+
+	print STDERR "   INFO: $_[0]\n";
+
+	$| = 0; #Re-allow output buffering
+    }
 }
 
 #
@@ -2703,7 +2754,7 @@ sub process_compiler_directive( $$$$ ) {
 
     print "CD===> $line\n" if $debug;
 
-    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+)(.*)$/i;
+    directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+|WARNING!\s+|INFO!\s+)(.*)$/i;
 
     my ($keyword, $expression) = ( uc $1, $2 );
 
@@ -2811,14 +2862,14 @@ sub process_compiler_directive( $$$$ ) {
 			      delete $actparams{$var}
 			  }
 		      } else {
-			  directive_warning( "Shorewall variable $2 does not exist", $filename, $linenumber );
+			  directive_warning( 'Yes', "Shorewall variable $2 does not exist", $filename, $linenumber );
 		      }
 
 		  } else {
 		      if ( exists $variables{$2} ) {
 			  delete $variables{$2};
 		      } else {
-			  directive_warning( "Shell variable $2 does not exist", $filename, $linenumber );
+			  directive_warning( 'Yes', "Shell variable $2 does not exist", $filename, $linenumber );
 		      }
 		  }
 	      }
@@ -2832,7 +2883,7 @@ sub process_compiler_directive( $$$$ ) {
 			      ( $comment = $line ) =~ s/^\s*\?COMMENT\s*//;
 			      $comment =~ s/\s*$//;
 			  } else {
-			      directive_warning( "COMMENTs ignored -- require comment support in iptables/Netfilter" , $filename, $linenumber ) unless $warningcount++;
+			      directive_warning( 'Yes', "COMMENTs ignored -- require comment support in iptables/Netfilter" , $filename, $linenumber ) unless $warningcount++;
 			  }
 		      }
 		  } else {
@@ -2851,7 +2902,8 @@ sub process_compiler_directive( $$$$ ) {
 	  } ,
 
 	  WARNING => sub() {
-	      directive_warning( evaluate_expression( $expression ,
+	      directive_warning( $config{VERBOSE_MESSAGES} ,
+		                 evaluate_expression( $expression ,
 						      $filename ,
 						      $linenumber ,
 						      1 ),
@@ -2860,7 +2912,28 @@ sub process_compiler_directive( $$$$ ) {
 	  } ,
 
 	  INFO => sub() {
-	      directive_info( evaluate_expression( $expression ,
+	      directive_info( $config{VERBOSE_MESSAGES} ,
+			      evaluate_expression( $expression ,
+						   $filename ,
+						   $linenumber ,
+						   1 ),
+			      $filename ,
+			      $linenumber ) unless $omitting;
+	  } ,
+
+	  'WARNING!' => sub() {
+	      directive_warning( ! $config{VERBOSE_MESSAGES} ,
+		                 evaluate_expression( $expression ,
+						      $filename ,
+						      $linenumber ,
+						      1 ),
+				 $filename ,
+				 $linenumber ) unless $omitting;
+	  } ,
+
+	  'INFO!' => sub() {
+	      directive_info( ! $config{VERBOSE_MESSAGES} ,
+			      evaluate_expression( $expression ,
 						   $filename ,
 						   $linenumber ,
 						   1 ),
@@ -3821,9 +3894,10 @@ my %logoptions = ( tcp_sequence         => '--log-tcp-sequence',
 
 sub validate_level( $;$ ) {
     my ( $rawlevel, $option ) = @_;
-    my $level    = uc $rawlevel;
+    my $level;
 
-    if ( supplied ( $level ) ) {
+    if ( supplied ( $rawlevel ) ) {
+	$level = uc $rawlevel;
 	$level =~ s/!$//;
 	my $value = $level;
 	my $qualifier;
@@ -5678,6 +5752,24 @@ sub get_configuration( $$$$ ) {
 	$ENV{PATH} = $default_path;
     }
 
+    fatal_error "Shorewall-core does not appear to be installed" unless open_file "$globals{SHAREDIRPL}coreversion";
+
+    fatal_error "$globals{SHAREDIRPL}coreversion is empty" unless read_a_line( PLAIN_READ );
+
+    close_file;
+
+    warning_message "Version Mismatch: Shorewall-core is version $currentline, while the Shorewall version is $globals{VERSION}" unless $currentline eq $globals{VERSION};
+
+    if ( $family == F_IPV6 ) {
+	open_file( "$globals{SHAREDIR}/version" ) || fatal_error "Unable to open $globals{SHAREDIR}/version";
+
+	fatal_error "$globals{SHAREDIR}/version is empty" unless read_a_line( PLAIN_READ );
+
+	close_file;
+
+	warning_message "Version Mismatch: Shorewall6 is version $currentline, while the Shorewall version is $globals{VERSION}" unless $currentline eq $globals{VERSION};
+    }
+
     my $have_capabilities;
 
     if ( $export || $> != 0 ) {
@@ -6109,6 +6201,7 @@ sub get_configuration( $$$$ ) {
     default_yes_no 'WARNOLDCAPVERSION'          , 'Yes';
     default_yes_no 'DEFER_DNS_RESOLUTION'       , 'Yes';
     default_yes_no 'MINIUPNPD'                  , '';
+    default_yes_no 'VERBOSE_MESSAGES'           , 'Yes';
 
     $config{IPSET} = '' if supplied $config{IPSET} && $config{IPSET} eq 'ipset';
 

Shorewall/Perl/Shorewall/Misc.pm

@@ -302,7 +302,7 @@ sub convert_blacklist() {
 	if ( @rules ) {
 	    my $fn1 = find_writable_file( 'blrules' );
 	    my $blrules;
-	    my $date = localtime;
+	    my $date = compiletime;
 
 	    if ( -f $fn1 ) {
 		open $blrules, '>>', $fn1 or fatal_error "Unable to open $fn1: $!";
@@ -393,7 +393,7 @@ sub convert_routestopped() {
 	my ( @allhosts, %source, %dest , %notrack, @rule );
 
 	my $seq  = 0;
-	my $date = localtime;
+	my $date = compiletime;
 
 	my ( $stoppedrules, $fn1 );
 
@@ -421,7 +421,7 @@ EOF
 
 	first_entry(
 		    sub {
-			my $date = localtime;
+			my $date = compiletime;
 			progress_message2 "$doing $fn...";
 			print( $stoppedrules
 			       "#\n" ,
@@ -649,9 +649,15 @@ sub create_docker_rules() {
 	add_ijump( $chainref, j => 'ACCEPT', o => 'docker0', state_imatch 'ESTABLISHED,RELATED' );
 	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => '! docker0' );
 	add_ijump( $chainref, j => 'ACCEPT', i => 'docker0', o => 'docker0' ) if $dockerref->{options}{routeback};
-	add_ijump( $filter_table->{OUTPUT}, j => 'DOCKER' );
 	decr_cmd_level( $chainref );
 	add_commands( $chainref, 'fi' );
+
+	my $outputref;
+	add_commands( $outputref = $filter_table->{OUTPUT}, 'if [ -n "$g_docker" ]; then' );
+	incr_cmd_level( $outputref );
+	add_ijump( $outputref, j => 'DOCKER' );
+	decr_cmd_level( $outputref );
+	add_commands( $outputref, 'fi' );
     }
 
     add_commands( $chainref, '[ -f ${VARDIR}/.filter_FORWARD ] && cat $VARDIR/.filter_FORWARD >&3', );
@@ -861,8 +867,10 @@ sub add_common_rules ( $ ) {
 	    }
 
 	    if ( $dbl_ipset && ! get_interface_option( $interface, 'nodbl' ) ) {
-		add_ijump_extended( $filter_table->{input_option_chain($interface)},  j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
+		add_ijump_extended( $filter_table->{input_option_chain($interface)},   j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
-		add_ijump_extended( $filter_table->{output_option_chain($interface)}, j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" ) if $dbl_type =~ /,src-dst$/;
+		add_ijump_extended( $filter_table->{output_option_chain($interface)},  j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" ) if $dbl_type =~ /,src-dst$/;
+		add_ijump_extended( $filter_table->{forward_option_chain($interface)}, j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset src" );
+		add_ijump_extended( $filter_table->{forward_option_chain($interface)}, j => $dbl_target, $origin{DYNAMIC_BLACKLIST}, @state, set => "--match-set $dbl_ipset dst" ) if $dbl_type =~ /,src-dst$/;
 	    }
 	    
 	    for ( option_chains( $interface ) ) {

Shorewall/Perl/Shorewall/Raw.pm

@@ -368,7 +368,7 @@ sub setup_conntrack($) {
     if ( $convert ) {
 	my $conntrack;
 	my $empty  = 1;
-	my $date = localtime;
+	my $date = compiletime;
 
 	if ( $fn ) {
 	    open $conntrack, '>>', $fn or fatal_error "Unable to open $fn for notrack conversion: $!";

Shorewall/Perl/Shorewall/Rules.pm

@@ -4464,6 +4464,16 @@ sub process_mangle_rule1( $$$$$$$$$$$$$$$$$$ ) {
 	    },
 	},
 
+	NFLOG      => {
+	    defaultchain  => 0,
+	    allowedchains => ALLCHAINS,
+	    minparams     => 0,
+	    maxparams     => 3,
+	    function      => sub () {
+		$target = validate_level( "NFLOG($params)" );
+	    }
+	},
+
 	RESTORE    => {
 	    defaultchain   => 0,
 	    allowedchains  => PREROUTING | INPUT | FORWARD | OUTPUT | POSTROUTING,

Shorewall/Perl/Shorewall/Tc.pm

@@ -352,7 +352,7 @@ sub process_simple_device() {
 	my $prio = 16 | $i;
 	emit "run_tc qdisc add dev $physical parent $number:$i handle ${number}${i}: sfq quantum 1875 limit 127 perturb 10";
 	emit "run_tc filter add dev $physical protocol all prio $prio parent $number: handle $i fw classid $number:$i";
-	emit "run_tc filter add dev $physical protocol all prio 1 parent ${number}$i: handle ${number}${i} flow hash keys $type divisor 1024" if $type ne '-' && have_capability 'FLOW_FILTER';
+	emit "run_tc filter add dev $physical protocol all prio 1 parent ${number}$i: flow hash keys $type divisor 1024" if $type ne '-' && have_capability 'FLOW_FILTER';
 	emit '';
     }
 
@@ -2166,7 +2166,7 @@ sub convert_tos($$) {
     if ( my $fn = open_file 'tos' ) {
 	first_entry(
 		    sub {
-			my $date = localtime;
+			my $date = compiletime;
 			progress_message2 "Converting $fn...";
 			print( $mangle
 			       "#\n" ,
@@ -2332,7 +2332,7 @@ sub setup_tc( $ ) {
 
 		first_entry(
 			    sub {
-				my $date = localtime;
+				my $date = compiletime;
 				progress_message2 "Converting $fn...";
 				print( $mangle
 				       "#\n" ,

Shorewall/Perl/lib.runtime

@@ -49,7 +49,7 @@
 #					generated this program
 #
 ################################################################################
-# Functions imported from /usr/share/shorewall/lib.core
+# Functions imported from /usr/share/shorewall/lib.runtime
 ################################################################################
 #		      Address family-neutral Functions
 ################################################################################
@@ -1110,7 +1110,7 @@ interface_is_usable() # $1 = interface
 #
 find_interface_addresses() # $1 = interface
 {
-    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer.*//'
+    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer [0-9a-f:]*//'
 }
 
 #
@@ -1119,7 +1119,7 @@ find_interface_addresses() # $1 = interface
 
 find_interface_full_addresses() # $1 = interface
 {
-    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer.*//'
+    $IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer [0-9a-f:]*//'
 }
 
 #

Shorewall/Perl/prog.footer

@@ -25,6 +25,7 @@ usage() {
     echo "   savesets <file>"
     echo "   call <function> [ <parameter> ... ]"
     echo "   version"
+    echo "   info"
     echo
     echo "Options are:"
     echo
@@ -469,6 +470,10 @@ case "$COMMAND" in
 	echo $SHOREWALL_VERSION
 	status=0
 	;;
+    info)
+	[ $# -ne 1 ] && usage 2
+	info_command
+	;;
     help)
 	[ $# -ne 1 ] && usage 2
 	usage 0

Shorewall/Samples/Universal/shorewall.conf

@@ -136,7 +136,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -242,6 +242,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/Samples/one-interface/shorewall.conf

@@ -147,7 +147,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -253,6 +253,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/Samples/three-interfaces/shorewall.conf

@@ -144,7 +144,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -250,6 +250,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/Samples/two-interfaces/shorewall.conf

@@ -147,7 +147,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -253,6 +253,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/configfiles/shorewall.conf

@@ -242,6 +242,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall/install.sh

@@ -514,7 +514,7 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 # Install the Standard Actions file
 #
 install_file actions.std ${DESTDIR}${SHAREDIR}/$PRODUCT/actions.std 0644
-echo "Standard actions file installed as ${DESTDIR}${SHAREDIR}d/$PRODUCT/actions.std"
+echo "Standard actions file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/actions.std"
 
 cd configfiles
 
@@ -1177,6 +1177,8 @@ fi
 # Install the Man Pages
 #
 
+if [ -n "$MANDIR" ]; then
+
 cd manpages
 
 [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
@@ -1196,6 +1198,7 @@ done
 cd ..
 
 echo "Man Pages Installed"
+fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
     run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
@@ -1212,7 +1215,7 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
-    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then

Shorewall/lib.cli-std

@@ -493,13 +493,13 @@ compiler() {
 
     case "$g_doing" in
 	Compiling|Checking)
-	    progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
+	    progress_message3 "$g_doing using Shorewall $SHOREWALL_VERSION..."
 	    ;;
 	Updating)
 	    progress_message3 "Updating $g_product configuration to $SHOREWALL_VERSION..."
 	    ;;
 	*)
-	    [ -n "$g_doing" ] && progress_message3 "$g_doing using $g_product $SHOREWALL_VERSION..."
+	    [ -n "$g_doing" ] && progress_message3 "$g_doing using Shorewall $SHOREWALL_VERSION..."
 	    ;;
     esac
     #
@@ -604,7 +604,7 @@ start_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -620,7 +620,8 @@ start_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" -o -n "$g_fast" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
+	    [ -n "$g_fast" ]         && fatal_error "Directory may not be specified with the -f option"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -634,7 +635,7 @@ start_command() {
 	    AUTOMAKE=
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -663,8 +664,6 @@ compile_command() {
 		shift
 		option=${option#-}
 
-		[ -z "$option" ] && usage 1
-
 		while [ -n "$option" ]; do
 		    case $option in
 			e*)
@@ -701,7 +700,7 @@ compile_command() {
 			    option=
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -723,7 +722,7 @@ compile_command() {
 	    [ -d "$g_file" ] && fatal_error "$g_file is a directory"
 	    ;;
 	2)
-	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && usage 2
+	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -737,7 +736,7 @@ compile_command() {
 	    g_file=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -791,7 +790,7 @@ check_command() {
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -807,7 +806,7 @@ check_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && usage 2
+	    [ -n "$g_shorewalldir" -a -z "$g_export" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -820,7 +819,7 @@ check_command() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -883,7 +882,7 @@ update_command() {
 			    option=${option#A}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -899,7 +898,7 @@ update_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -912,7 +911,7 @@ update_command() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -977,7 +976,7 @@ restart_command() {
 			    option=${option#C}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -993,7 +992,7 @@ restart_command() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -1008,7 +1007,7 @@ restart_command() {
 	    AUTOMAKE=
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -1086,7 +1085,7 @@ refresh_command() {
 			    fi
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1169,7 +1168,7 @@ safe_commands() {
 			    shift;
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1185,7 +1184,7 @@ safe_commands() {
 	0)
 	    ;;
 	1)
-	    [ -n "$g_shorewalldir" ] && usage 2
+	    [ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	    if [ ! -d $1 ]; then
 		if [ -e $1 ]; then
@@ -1198,7 +1197,7 @@ safe_commands() {
 	    g_shorewalldir=$(resolve_file $1)
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $2
 	    ;;
     esac
 
@@ -1286,7 +1285,7 @@ try_command() {
     timeout=
 
     handle_directory() {
-	[ -n "$g_shorewalldir" ] && usage 2
+	[ -n "$g_shorewalldir" ] && fatal_error "A directory has already been specified: $1"
 
 	if [ ! -d $1 ]; then
 	    if [ -e $1 ]; then
@@ -1316,7 +1315,7 @@ try_command() {
 			    option=${option#n}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1330,7 +1329,7 @@ try_command() {
 
     case $# in
 	0)
-	    usage 1
+	    missing_argument
 	    ;;
 	1)
 	    handle_directory $1
@@ -1341,7 +1340,7 @@ try_command() {
 	    timeout=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -1480,7 +1479,7 @@ remote_reload_command() # $* = original arguments less the command.
 			    option=${option#i}
 			    ;;
 			*)
-			    usage 1
+			    option_error $option
 			    ;;
 		    esac
 		done
@@ -1493,6 +1492,9 @@ remote_reload_command() # $* = original arguments less the command.
     done
 
     case $# in
+	0)
+	    missing_argument
+	    ;;
 	1)
 	    g_shorewalldir="."
 	    system=$1
@@ -1502,7 +1504,7 @@ remote_reload_command() # $* = original arguments less the command.
 	    system=$2
 	    ;;
 	*)
-	    usage 1
+	    too_many_arguments $3
 	    ;;
     esac
 
@@ -1742,7 +1744,7 @@ compiler_command() {
 	    safe_commands $@
 	    ;;
 	*)
-	    usage 1
+	    fatal_error "Invalid command: $COMMAND"
 	    ;;
     esac
 

Shorewall/manpages/shorewall-mangle.xml

@@ -504,7 +504,7 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
 
                     <member>0xc0a80403 LAND 0xFF = 0x03</member>
 
-                    <member>0x03 LOR 0x0x10100 = 0x10103 or class ID
+                    <member>0x03 LOR 0x10100 = 0x10103 or class ID
                     1:103</member>
                   </simplelist>
                 </blockquote>
@@ -598,6 +598,36 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">NFLOG</emphasis>[(<emphasis>nflog-parameters</emphasis>)]</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.9. Logs matching packets using
+                NFLOG. The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">RESTORE</emphasis>[(<emphasis>mask</emphasis>)]</term>

Shorewall/manpages/shorewall-rules.xml

@@ -595,9 +595,32 @@
                 <para>Added in Shorewall 4.5.9.3. Queues matching packets to a
                 back end logging daemon via a netlink socket then continues to
                 the next rule. See <ulink
-                url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
+                url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.
+                </para>
 
-                <para>Similar to<emphasis role="bold">
+                <para>The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+
+                <para>NFLOG is similar to<emphasis role="bold">
                 LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
                 except that the log level is not changed when this ACTION is
                 used in an action or macro body and the invocation of that

Shorewall/manpages/shorewall.conf.xml

@@ -2508,7 +2508,7 @@ INLINE          -       -       -       ; -j REJECT
           role="bold">refresh</emphasis>, <emphasis
           role="bold">try</emphasis>, and <emphasis
           role="bold">safe-</emphasis>* command. Logging verbosity is
-          determined by the setting of LOG_VERBOSITY above. </para>
+          determined by the setting of LOG_VERBOSITY above.</para>
         </listitem>
       </varlistentry>
 
@@ -2864,6 +2864,20 @@ INLINE          -       -       -       ; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">VERBOSE_MESSAGES=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.9. When Yes (the default), messages
+          produced by the ?INFO and ?WARNING directives include the filename
+          and linenumber of the directive. When set to No, that additional
+          information is omitted. The setting may be overridden on a directive
+          by directive basis by following ?INFO or ?WARNING with '!' (no
+          intervening white space).</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>

Shorewall/uninstall.sh

@@ -215,7 +215,7 @@ rm -rf ${SHAREDIR}/shorewall/configfiles/
 rm -rf ${SHAREDIR}/shorewall/Samples/
 rm -rf ${SHAREDIR}/shorewall/Shorewall/
 rm -f  ${SHAREDIR}/shorewall/lib.cli-std
-rm -f  ${SHAREDIR}/shorewall/lib.core
+rm -f  ${SHAREDIR}/shorewall/lib.runtime
 rm -f  ${SHAREDIR}/shorewall/compiler.pl
 rm -f  ${SHAREDIR}/shorewall/prog.*
 rm -f  ${SHAREDIR}/shorewall/module*

Shorewall6/Samples6/Universal/shorewall6.conf

@@ -129,7 +129,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/Samples6/one-interface/shorewall6.conf

@@ -130,7 +130,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -214,6 +214,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/Samples6/three-interfaces/shorewall6.conf

@@ -129,7 +129,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/Samples6/two-interfaces/shorewall6.conf

@@ -129,7 +129,7 @@ AUTOCOMMENT=Yes
 
 AUTOHELPERS=Yes
 
-AUTOMAKE=No
+AUTOMAKE=Yes
 
 BLACKLIST="NEW,INVALID,UNTRACKED"
 
@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/configfiles/shorewall6.conf

@@ -213,6 +213,8 @@ USE_PHYSICAL_NAMES=No
 
 USE_RT_NAMES=No
 
+VERBOSE_MESSAGES=Yes
+
 WARNOLDCAPVERSION=Yes
 
 WORKAROUNDS=No

Shorewall6/manpages/shorewall6-mangle.xml

@@ -515,7 +515,7 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
 
                     <member>0xc0a80403 LAND 0xFF = 0x03</member>
 
-                    <member>0x03 LOR 0x0x10100 = 0x10103 or class ID
+                    <member>0x03 LOR 0x10100 = 0x10103 or class ID
                     1:103</member>
                   </simplelist>
                 </blockquote>
@@ -609,6 +609,36 @@ INLINE                eth0              -                 ; -p tcp -j MARK --set
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis
+              role="bold">NFLOG</emphasis>[(<emphasis>nflog-parameters</emphasis>)]</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.0.9. Logs matching packets using
+                NFLOG. The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1. </para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis
               role="bold">RESTORE</emphasis>[(<emphasis>mask</emphasis>)]</term>

Shorewall6/manpages/shorewall6-rules.xml

@@ -574,7 +574,29 @@
                 the next rule. See <ulink
                 url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
 
-                <para>Similar to<emphasis role="bold">
+                <para>The <replaceable>nflog-parameters</replaceable> are a
+                comma-separated list of up to 3 numbers:</para>
+
+                <itemizedlist>
+                  <listitem>
+                    <para>The first number specifies the netlink group
+                    (0-65535). If omitted (e.g., NFLOG(,0,10)) then a value of
+                    0 is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The second number specifies the maximum number of
+                    bytes to copy. If omitted, 0 (no limit) is assumed.</para>
+                  </listitem>
+
+                  <listitem>
+                    <para>The third number specifies the number of log
+                    messages that should be buffered in the kernel before they
+                    are sent to user space. The default is 1.</para>
+                  </listitem>
+                </itemizedlist>
+
+                <para>NFLOG is similar to<emphasis role="bold">
                 LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
                 except that the log level is not changed when this ACTION is
                 used in an action or macro and the invocation of that action
@@ -1636,7 +1658,7 @@
             <varlistentry>
               <term><emphasis role="bold">route</emphasis>, <emphasis
               role="bold">ipv6-route</emphasis> or <emphasis
-              role="bold">41</emphasis></term>
+              role="bold">43</emphasis></term>
 
               <listitem>
                 <para>IPv6 Route extension header.</para>

Shorewall6/manpages/shorewall6.conf.xml

@@ -2506,6 +2506,20 @@ INLINE          -       -       -       ; -j REJECT
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">VERBOSE_MESSAGES=</emphasis>[<emphasis
+        role="bold">Yes</emphasis>|<emphasis role="bold">No</emphasis>]</term>
+
+        <listitem>
+          <para>Added in Shorewall 5.0.9. When Yes (the default), messages
+          produced by the ?INFO and ?WARNING directives include the filename
+          and linenumber of the directive. When set to No, that additional
+          information is omitted. The setting may be overridden on a directive
+          by directive basis by following ?INFO or ?WARNING with '!' (no
+          intervening white space).</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis
         role="bold">VERBOSITY=</emphasis>[<emphasis>number</emphasis>]</term>

docs/Documentation_Index.xml

@@ -74,7 +74,7 @@
   <section>
     <title>Documentation for Earlier Versions</title>
 
-    <para><ulink url="4.2/Documentation_Index.html">Shorewall 4.4/4.6
+    <para><ulink url="4.6/Documentation_Index.html">Shorewall 4.4/4.6
     Documentation</ulink></para>
 
     <para><ulink url="4.2/Documentation_Index.html">Shorewall 4.0/4.2

docs/Dynamic.xml

@@ -95,6 +95,11 @@ rsyncok     eth1:<emphasis role="bold">dynamic</emphasis></programlisting>
       <para>When the <emphasis role="bold">dynamic_shared</emphasis> option is
       specified, a single ipset is created; the ipset has the same name as the
       zone.</para>
+
+      <para>In the above example, <emphasis role="bold">rsyncok</emphasis> is
+      a sub-zone of the single zone <emphasis role="bold">loc</emphasis>.
+      Making a dynamic zone a sub-zone of multiple other zones is also
+      supported.</para>
     </section>
 
     <section id="Adding">

docs/Shorewall-5.xml

@@ -301,8 +301,8 @@
 
       <para>COMMENT, FORMAT and SECTION Lines now require the leading question
       mark ("?"). In earlier releases, the question mark was optional. The
-      <command>shorewall[6] update -D</command> command will insert the
+      <command>shorewall[6] update -D</command> command in Shorewall 4.6 will
-      question marks for you.</para>
+      insert the question marks for you.</para>
     </section>
   </section>
 
@@ -359,7 +359,7 @@
 
     <para>It is strongly recommended that you first upgrade your installation
     to a 4.6 release that supports the <option>-A</option> option to the
-    <command>update</command> command; 4.6.13 is preferred.</para>
+    <command>update</command> command; 4.6.13.2 or later is preferred.</para>
 
     <para>Once you are on that release, execute the <command>shorewall update
     -A</command> command (and <command>shorewall6 update -A</command> if you
@@ -374,11 +374,11 @@
     likely won't start or work correctly until you do.</para>
 
     <para>The <command>update</command> command in Shorewall 5 has many fewer
-    options. The <option>-b</option>, <option>-t</option>, <option>-n</option>
+    options. The <option>-b</option>, <option>-t</option>,
-    and <option>-s </option>options have been removed -- the updates triggered
+    <option>-n</option>, <option>-D</option> and <option>-s </option>options
-    by those options are now performed unconditionally. The <option>-i
+    have been removed -- the updates triggered by those options are now
-    </option>and <option>-A </option>options have been retained - both enable
+    performed unconditionally. The <option>-i </option>and <option>-A
-    checking for issues that could result if INLINE_MATCHES were to be set to
+    </option>options have been retained - both enable checking for issues that
-    Yes.</para>
+    could result if INLINE_MATCHES were to be set to Yes.</para>
   </section>
 </article>

docs/blacklisting_support.xml

@@ -48,7 +48,7 @@
   <section id="Intro">
     <title>Introduction</title>
 
-    <para>Shorewall supports two different types of blackliisting; rule-based,
+    <para>Shorewall supports two different types of blacklisting; rule-based,
     static and dynamic. The BLACKLIST option in /etc/shorewall/shorewall.conf
     controls the degree of blacklist filtering.</para>
 

docs/shorewall_logging.xml

@@ -293,7 +293,7 @@ gateway:/etc/shorewall#                                               </programl
 
       <itemizedlist>
         <listitem>
-          <para>The first number specifies the netlink group (0-32). If
+          <para>The first number specifies the netlink group (0-65535). If
           omitted (e.g., NFLOG(,0,10)) then a value of 0 is assumed.</para>
         </listitem>