Support the DROP command in the mangle file

Signed-off-by: Tom Eastep <teastep@shorewall.net>

Shorewall-core/configure

@@ -235,8 +235,7 @@ for on in \
     SPARSE \
     ANNOTATED \
     VARLIB \
-    VARDIR \
+    VARDIR
-    DEFAULT_PAGER
 do
     echo "$on=${options[${on}]}"
     echo "$on=${options[${on}]}" >> shorewallrc

Shorewall-core/configure.pl

@@ -209,8 +209,7 @@ for ( qw/ HOST
 	  SPARSE
 	  ANNOTATED
 	  VARLIB
-	  VARDIR
+	  VARDIR / ) {
-          DEFAULT_PAGER / ) {
 
     my $val = $options{$_} || '';
 

Shorewall-core/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -24,9 +24,6 @@
 
 VERSION=xxx #The Build script inserts the actual version
 
-PRODUCT=shorewall-core
-Product="Shorewall Core"
- 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
@@ -103,9 +100,6 @@ require()
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
-#
-# Change to the directory containing this script
-#
 cd "$(dirname $0)"
 
 #
@@ -346,10 +340,8 @@ fi
 mkdir -p ${DESTDIR}${SBINDIR}
 chmod 755 ${DESTDIR}${SBINDIR}
 
-if [ -n "${MANDIR}" ]; then
+mkdir -p ${DESTDIR}${MANDIR}
-    mkdir -p ${DESTDIR}${MANDIR}
+chmod 755 ${DESTDIR}${MANDIR}
-    chmod 755 ${DESTDIR}${MANDIR}
-fi
 
 if [ -n "${INITFILE}" ]; then
     mkdir -p ${DESTDIR}${INITDIR}
@@ -365,12 +357,6 @@ fi
 # Note: ${VARDIR} is created at run-time since it has always been
 #       a relocatable directory on a per-product basis
 #
-# Install the CLI
-#
-install_file shorewall ${DESTDIR}${SBINDIR}/shorewall 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall
-echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
-#
 # Install wait4ifup
 #
 install_file wait4ifup ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup 0755
@@ -386,31 +372,6 @@ for f in lib.* ; do
     echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
 done
 
-if [ $SHAREDIR != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.core
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.cli
-fi
-
-#
-# Install the Man Pages
-#
-if [ -n "$MANDIR" ]; then
-    cd manpages
-
-    [ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man8/
-
-    for f in *.8; do
-	gzip -9c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
-	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
-    done
-
-    cd ..
-
-    echo "Man Pages Installed"
-fi
-
 #
 # Symbolically link 'functions' to lib.base
 #

Shorewall-core/lib.base

@@ -20,22 +20,412 @@
 #	You should have received a copy of the GNU General Public License
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
-# This library is a compatibility wrapper around lib.core.
+# This library contains the code common to all Shorewall components except the
+# generated scripts.
 #
 
-if [ -z "$PRODUCT" ]; then
+SHOREWALL_LIBVERSION=40509
+
+[ -n "${g_program:=shorewall}" ]
+
+if [ -z "$g_readrc" ]; then
     #
     # This is modified by the installer when ${SHAREDIR} != /usr/share
     #
     . /usr/share/shorewall/shorewallrc
 
-    g_basedir=${SHAREDIR}/shorewall
+    g_sharedir="$SHAREDIR"/$g_program
+    g_confdir="$CONFDIR"/$g_program
+    g_readrc=1
+fi
 
-    if [ -z "$SHOREWALL_LIBVERSION" ]; then
+g_basedir=${SHAREDIR}/shorewall
-	. ${g_basedir}/lib.core
+
+case $g_program in
+    shorewall)
+	g_product="Shorewall"
+	g_family=4
+	g_tool=iptables
+	g_lite=
+	;;
+    shorewall6)
+	g_product="Shorewall6"
+	g_family=6
+	g_tool=ip6tables
+	g_lite=
+	;;
+    shorewall-lite)
+	g_product="Shorewall Lite"
+	g_family=4
+	g_tool=iptables
+	g_lite=Yes
+	;;
+    shorewall6-lite)
+	g_product="Shorewall6 Lite"
+	g_family=6
+	g_tool=ip6tables
+	g_lite=Yes
+	;;
+esac
+
+if [ -z "${VARLIB}" ]; then
+    VARLIB=${VARDIR}
+    VARDIR=${VARLIB}/$g_program
+elif [ -z "${VARDIR}" ]; then
+    VARDIR="${VARLIB}/${PRODUCT}"
+fi
+
+#
+# Fatal Error
+#
+fatal_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 2
+}
+
+#
+# Not configured Error
+#
+not_configured_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 6
+}
+
+#
+# Conditionally produce message
+#
+progress_message() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 1 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message2() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message3() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -ge 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+#
+# Undo the effect of 'separate_list()'
+#
+combine_list()
+{
+    local f
+    local o
+    o=
+
+    for f in $* ; do
+        o="${o:+$o,}$f"
+    done
+
+    echo $o
+}
+
+#
+# Validate an IP address
+#
+valid_address() {
+    local x
+    local y
+    local ifs
+    ifs=$IFS
+
+    IFS=.
+
+    for x in $1; do
+	case $x in
+	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
+		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
+                ;;
+	    *)
+	        IFS=$ifs
+		return 2
+		;;
+	esac
+    done
+
+    IFS=$ifs
+
+    return 0
+}
+
+#
+# Miserable Hack to work around broken BusyBox ash in OpenWRT
+#
+addr_comp() {
+    test $(bc <<EOF
+$1 > $2
+EOF
+) -eq 1
+
+}
+
+#
+# Enumerate the members of an IP range -- When using a shell supporting only
+# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
+#
+# Comes in two flavors:
+#
+# ip_range() - produces a mimimal list of network/host addresses that spans
+#              the range.
+#
+# ip_range_explicit() - explicitly enumerates the range.
+#
+ip_range() {
+    local first
+    local last
+    local l
+    local x
+    local y
+    local z
+    local vlsm
+
+    case $1 in
+	!*)
+	    #
+	    # Let iptables complain if it's a range
+	    #
+	    echo $1
+	    return
+	    ;;
+	[0-9]*.*.*.*-*.*.*.*)
+            ;;
+	*)
+	    echo $1
+	    return
+	    ;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
     fi
 
-    set_default_product
+    l=$(( $last + 1 ))
 
-    setup_product_environment
+    while addr_comp $l $first; do
-fi
+	vlsm=
+	x=31
+	y=2
+	z=1
+
+	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
+	    vlsm=/$x
+	    x=$(( $x - 1 ))
+	    z=$y
+	    y=$(( $y * 2 ))
+	done
+
+	echo $(encodeaddr $first)$vlsm
+	first=$(($first + $z))
+    done
+}
+
+ip_range_explicit() {
+    local first
+    local last
+
+    case $1 in
+    [0-9]*.*.*.*-*.*.*.*)
+	;;
+    *)
+	echo $1
+	return
+	;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
+    fi
+
+    while ! addr_comp $first $last; do
+	echo $(encodeaddr $first)
+	first=$(($first + 1))
+    done
+}
+
+[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
+
+#
+# Netmask to VLSM
+#
+ip_vlsm() {
+    local mask
+    mask=$(decodeaddr $1)
+    local vlsm
+    vlsm=0
+    local x
+    x=$(( 128 << 24 )) # 0x80000000
+
+    while [ $(( $x & $mask )) -ne 0 ]; do
+	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
+	vlsm=$(($vlsm + 1))
+    done
+
+    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
+	echo "Invalid net mask: $1" >&2
+    else
+	echo $vlsm
+    fi
+}
+
+#
+# Set default config path
+#
+ensure_config_path() {
+    local F
+    F=${g_sharedir}/configpath
+    if [ -z "$CONFIG_PATH" ]; then
+	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
+	. $F
+    fi
+
+    if [ -n "$g_shorewalldir" ]; then
+	[ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ] || CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
+    fi
+}
+
+#
+# Get fully-qualified name of file
+#
+resolve_file() # $1 = file name
+{
+    local pwd
+    pwd=$PWD
+
+    case $1 in
+	/*)
+	    echo $1
+	    ;;
+	.)
+	    echo $pwd
+	    ;;
+	./*)
+	    echo ${pwd}${1#.}
+	    ;;
+	..)
+	    cd ..
+	    echo $PWD
+	    cd $pwd
+	    ;;
+	../*)
+	    cd ..
+	    resolve_file ${1#../}
+	    cd $pwd
+	    ;;
+	*)
+	    echo $pwd/$1
+	    ;;
+    esac
+}
+
+#
+# Determine how to do "echo -e"
+#
+
+find_echo() {
+    local result
+
+    result=$(echo "a\tb")
+    [ ${#result} -eq 3 ] && { echo echo; return; }
+
+    result=$(echo -e "a\tb")
+    [ ${#result} -eq 3 ] && { echo "echo -e"; return; }
+
+    result=$(which echo)
+    [ -n "$result" ] && { echo "$result -e"; return; }
+
+    echo echo
+}
+
+# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
+#
+#     None - No mktemp
+#     BSD  - BSD mktemp (Mandrake)
+#     STD  - mktemp.org mktemp
+#
+find_mktemp() {
+    local mktemp
+    mktemp=`mywhich mktemp 2> /dev/null`
+
+    if [ -n "$mktemp" ]; then
+	if qt mktemp -V ; then
+	    MKTEMP=STD
+	else
+	    MKTEMP=BSD
+	fi
+    else
+	MKTEMP=None
+    fi
+}
+
+#
+# create a temporary file. If a directory name is passed, the file will be created in
+# that directory. Otherwise, it will be created in a temporary directory.
+#
+mktempfile() {
+
+    [ -z "$MKTEMP" ] && find_mktemp
+
+    if [ $# -gt 0 ]; then
+	case "$MKTEMP" in
+	    BSD)
+		mktemp $1/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -p $1 shorewall.XXXXXX
+		;;
+	    None)
+		> $1/shorewall-$$ && echo $1/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    else
+	case "$MKTEMP" in
+	    BSD)
+		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -t shorewall.XXXXXX
+		;;
+	    None)
+		rm -f ${TMPDIR:-/tmp}/shorewall-$$
+		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    fi
+}

Shorewall-core/lib.common

@@ -25,22 +25,6 @@
 # scripts rather than loaded at run-time.
 #
 #########################################################################################
-#
-# Wrapper around logger that sets the tag according to $SW_LOGGERTAG
-#
-mylogger() {
-    local level
-
-    level=$1
-    shift
-
-    if [ -n "$SW_LOGGERTAG" ]; then
-	logger -p $level -t "$SW_LOGGERTAG" $*
-    else
-	logger -p $level $*
-    fi
-}
-
 #
 # Issue a message and stop
 #
@@ -49,24 +33,24 @@ startup_error() # $* = Error Message
     echo "   ERROR: $@: Firewall state not changed" >&2
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %e %T') "
+        timestamp="$(date +'%b %d %T') "
         echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
     fi
 
     case $COMMAND in
         start)
-	    mylogger kern.err "ERROR:$g_product start failed:Firewall state not changed"
+	    logger -p kern.err "ERROR:$g_product start failed:Firewall state not changed"
 	    ;;
 	restart)
-	    mylogger kern.err "ERROR:$g_product restart failed:Firewall state not changed"
+	    logger -p kern.err "ERROR:$g_product restart failed:Firewall state not changed"
 	    ;;
 	restore)
-	    mylogger kern.err "ERROR:$g_product restore failed:Firewall state not changed"
+	    logger -p kern.err "ERROR:$g_product restore failed:Firewall state not changed"
 	    ;;
     esac
 
     if [ $LOG_VERBOSITY -ge 0 ]; then
-        timestamp="$(date +'%b %e %T') "
+        timestamp="$(date +'%b %d %T') "
 
 	case $COMMAND in
 	    start)
@@ -712,9 +696,9 @@ find_file()
 set_state () # $1 = state
 {
     if [ $# -gt 1 ]; then
-	echo "$1 $(date) from $2" > ${VARDIR}/state
+	echo "$1 ($(date)) from $2" > ${VARDIR}/state
     else
-	echo "$1 $(date)" > ${VARDIR}/state
+	echo "$1 ($(date))" > ${VARDIR}/state
     fi
 }
 
@@ -776,7 +760,7 @@ mutex_on()
 		error_message "WARNING: Stale lockfile ${lockf} removed"
 	    elif [ $lockpid -eq $$ ]; then
                 return 0
-	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
+	    elif ! qt ps p ${lockpid}; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
 	    fi
@@ -788,8 +772,10 @@ mutex_on()
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
 	elif qt mywhich lock; then
-            lock ${lockf}
+            lock -${MUTEX_TIMEOUT} -r1 ${lockf}
-            chmod u=r ${lockf}
+            chmod u+w ${lockf}
+            echo $$ > ${lockf}
+            chmod u-w ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -811,7 +797,6 @@ mutex_on()
 #
 mutex_off()
 {
-    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
     rm -f ${LOCKFILE:=${VARDIR}/lock}
 }
 

Shorewall-core/lib.core

@@ -1,461 +0,0 @@
-#
-# Shorewall 5.0 -- /usr/share/shorewall/lib.core
-#
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
-#
-#	Complete documentation is available at http://shorewall.net
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# This library contains the code common to all Shorewall components except the
-# generated scripts.
-#
-
-SHOREWALL_LIBVERSION=50100
-
-#
-# Fatal Error
-#
-fatal_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 2
-}
-
-setup_product_environment() { # $1 = if non-empty, source shorewallrc again now that we have the correct product
-    g_basedir=${SHAREDIR}/shorewall
-
-    g_sharedir="$SHAREDIR"/$PRODUCT
-    g_confdir="$CONFDIR"/$PRODUCT
-
-    case $PRODUCT in
-	shorewall)
-	    g_product="Shorewall"
-	    g_family=4
-	    g_tool=iptables
-	    g_lite=
-	    g_options=-l
-	    ;;
-	shorewall6)
-	    g_product="Shorewall6"
-	    g_family=6
-	    g_tool=ip6tables
-	    g_lite=
-	    g_options=-6l
-	    ;;
-	shorewall-lite)
-	    g_product="Shorewall Lite"
-	    g_family=4
-	    g_tool=iptables
-	    g_lite=Yes
-	    ;;
-	shorewall6-lite)
-	    g_product="Shorewall6 Lite"
-	    g_family=6
-	    g_tool=ip6tables
-	    g_lite=Yes
-	    ;;
-	*)
-	    fatal_error "Unknown PRODUCT ($PRODUCT)"
-	    ;;
-    esac
-
-    [ -f ${SHAREDIR}/${PRODUCT}/version ] || fatal_error "$g_product does not appear to be installed on this system"
-    #
-    # We need to do this again, now that we have the correct product
-    #
-    [ -n "$1" ] && . ${g_basedir}/shorewallrc
-
-    if [ -z "${VARLIB}" ]; then
-	VARLIB=${VARDIR}
-	VARDIR=${VARLIB}/${PRODUCT}
-    elif [ -z "${VARDIR}" ]; then
-	VARDIR="${VARLIB}/${PRODUCT}"
-    fi
-}
-
-set_default_product() {
-    case $(basename $0) in
-	shorewall6)
-	    PRODUCT=shorewall6
-	    ;;
-	shorewall4)
-	    PRODUCT=shorewall
-	    ;;
-	shorewall-lite)
-	    PRODUCT=shorewall-lite
-	    ;;
-	shorewall6-lite)
-	    PRODUCT=shorewall6-lite
-	    ;;
-	*)
-	    if [ -f ${g_basedir}/version ]; then
-		PRODUCT=shorewall
-	    elif [ -f ${SHAREDIR}/shorewall-lite/version ]; then
-		PRODUCT=shorewall-lite
-	    elif [ -f ${SHAREDIR}/shorewall6-lite/version ]; then
-		PRODUCT=shorewall6-lite
-	    else
-		fatal_error "No Shorewall firewall product is installed"
-	    fi
-	    ;;
-    esac
-}
-
-# Not configured Error
-#
-not_configured_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 6
-}
-
-#
-# Conditionally produce message
-#
-progress_message() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -gt 1 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-progress_message2() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -gt 0 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-progress_message3() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -ge 0 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-#
-# Undo the effect of 'separate_list()'
-#
-combine_list()
-{
-    local f
-    local o
-    o=
-
-    for f in $* ; do
-        o="${o:+$o,}$f"
-    done
-
-    echo $o
-}
-
-#
-# Validate an IP address
-#
-valid_address() {
-    local x
-    local y
-    local ifs
-    ifs=$IFS
-
-    IFS=.
-
-    for x in $1; do
-	case $x in
-	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
-		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
-                ;;
-	    *)
-	        IFS=$ifs
-		return 2
-		;;
-	esac
-    done
-
-    IFS=$ifs
-
-    return 0
-}
-
-#
-# Miserable Hack to work around broken BusyBox ash in OpenWRT
-#
-addr_comp() {
-    test $(bc <<EOF
-$1 > $2
-EOF
-) -eq 1
-
-}
-
-#
-# Enumerate the members of an IP range -- When using a shell supporting only
-# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
-#
-# Comes in two flavors:
-#
-# ip_range() - produces a mimimal list of network/host addresses that spans
-#              the range.
-#
-# ip_range_explicit() - explicitly enumerates the range.
-#
-ip_range() {
-    local first
-    local last
-    local l
-    local x
-    local y
-    local z
-    local vlsm
-
-    case $1 in
-	!*)
-	    #
-	    # Let iptables complain if it's a range
-	    #
-	    echo $1
-	    return
-	    ;;
-	[0-9]*.*.*.*-*.*.*.*)
-            ;;
-	*)
-	    echo $1
-	    return
-	    ;;
-    esac
-
-    first=$(decodeaddr ${1%-*})
-    last=$(decodeaddr ${1#*-})
-
-    if addr_comp $first $last; then
-	fatal_error "Invalid IP address range: $1"
-    fi
-
-    l=$(( $last + 1 ))
-
-    while addr_comp $l $first; do
-	vlsm=
-	x=31
-	y=2
-	z=1
-
-	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
-	    vlsm=/$x
-	    x=$(( $x - 1 ))
-	    z=$y
-	    y=$(( $y * 2 ))
-	done
-
-	echo $(encodeaddr $first)$vlsm
-	first=$(($first + $z))
-    done
-}
-
-ip_range_explicit() {
-    local first
-    local last
-
-    case $1 in
-    [0-9]*.*.*.*-*.*.*.*)
-	;;
-    *)
-	echo $1
-	return
-	;;
-    esac
-
-    first=$(decodeaddr ${1%-*})
-    last=$(decodeaddr ${1#*-})
-
-    if addr_comp $first $last; then
-	fatal_error "Invalid IP address range: $1"
-    fi
-
-    while ! addr_comp $first $last; do
-	echo $(encodeaddr $first)
-	first=$(($first + 1))
-    done
-}
-
-[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
-
-#
-# Netmask to VLSM
-#
-ip_vlsm() {
-    local mask
-    mask=$(decodeaddr $1)
-    local vlsm
-    vlsm=0
-    local x
-    x=$(( 128 << 24 )) # 0x80000000
-
-    while [ $(( $x & $mask )) -ne 0 ]; do
-	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
-	vlsm=$(($vlsm + 1))
-    done
-
-    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
-	echo "Invalid net mask: $1" >&2
-    else
-	echo $vlsm
-    fi
-}
-
-#
-# Set default config path
-#
-ensure_config_path() {
-    local F
-    F=${g_sharedir}/configpath
-    if [ -z "$CONFIG_PATH" ]; then
-	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
-	. $F
-    fi
-
-    if [ -n "$g_shorewalldir" ]; then
-	[ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ] || CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
-    fi
-}
-
-#
-# Get fully-qualified name of file
-#
-resolve_file() # $1 = file name
-{
-    local pwd
-    pwd=$PWD
-
-    case $1 in
-	/*)
-	    echo $1
-	    ;;
-	.)
-	    echo $pwd
-	    ;;
-	./*)
-	    echo ${pwd}${1#.}
-	    ;;
-	..)
-	    cd ..
-	    echo $PWD
-	    cd $pwd
-	    ;;
-	../*)
-	    cd ..
-	    resolve_file ${1#../}
-	    cd $pwd
-	    ;;
-	*)
-	    echo $pwd/$1
-	    ;;
-    esac
-}
-
-#
-# Determine how to do "echo -e"
-#
-
-find_echo() {
-    local result
-
-    result=$(echo "a\tb")
-    [ ${#result} -eq 3 ] && { echo echo; return; }
-
-    result=$(echo -e "a\tb")
-    [ ${#result} -eq 3 ] && { echo "echo -e"; return; }
-
-    result=$(which echo)
-    [ -n "$result" ] && { echo "$result -e"; return; }
-
-    echo echo
-}
-
-# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
-#
-#     None - No mktemp
-#     BSD  - BSD mktemp (Mandrake)
-#     STD  - mktemp.org mktemp
-#
-find_mktemp() {
-    local mktemp
-    mktemp=`mywhich mktemp 2> /dev/null`
-
-    if [ -n "$mktemp" ]; then
-	if qt mktemp -V ; then
-	    MKTEMP=STD
-	else
-	    MKTEMP=BSD
-	fi
-    else
-	MKTEMP=None
-    fi
-}
-
-#
-# create a temporary file. If a directory name is passed, the file will be created in
-# that directory. Otherwise, it will be created in a temporary directory.
-#
-mktempfile() {
-
-    [ -z "$MKTEMP" ] && find_mktemp
-
-    if [ $# -gt 0 ]; then
-	case "$MKTEMP" in
-	    BSD)
-		mktemp $1/shorewall.XXXXXX
-		;;
-	    STD)
-		mktemp -p $1 shorewall.XXXXXX
-		;;
-	    None)
-		> $1/shorewall-$$ && echo $1/shorewall-$$
-		;;
-	    *)
-		error_message "ERROR:Internal error in mktempfile"
-		;;
-	esac
-    else
-	case "$MKTEMP" in
-	    BSD)
-		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
-		;;
-	    STD)
-		mktemp -t shorewall.XXXXXX
-		;;
-	    None)
-		rm -f ${TMPDIR:-/tmp}/shorewall-$$
-		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
-		;;
-	    *)
-		error_message "ERROR:Internal error in mktempfile"
-		;;
-	esac
-    fi
-}

Shorewall-core/shorewallrc.apple

@@ -19,4 +19,3 @@ SERVICEFILE=                           #Unused on OS X
 SYSCONFDIR=                            #Unused on OS X
 SPARSE=Yes                             #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
 VARLIB=/var/lib                        #Unused on OS X
-DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.archlinux

@@ -20,4 +20,3 @@ SERVICEFILE=                           #Name of the file to install in $SYSTEMD.
 SPARSE=                                #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                        #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT              #Directory where product variable data is stored.
-DEFAULT_PAGER=			       #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.cygwin

@@ -19,4 +19,3 @@ SERVICEFILE=                          #Unused on Cygwin
 SYSCONFDIR=                           #Unused on Cygwin
 SPARSE=Yes                            #Only install $PRODUCT/$PRODUCT.conf in $CONFDIR.
 VARLIB=/var/lib                       #Unused on Cygwin
-DEFAULT_PAGER=			      #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.debian.systemd

@@ -21,4 +21,3 @@ SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (s
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib				#Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.
-DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.debian.sysvinit

@@ -21,4 +21,3 @@ SERVICEDIR=				#Directory where .service files are installed (systems running sy
 SPARSE=Yes                              #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
-DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.default

@@ -21,4 +21,3 @@ SYSCONFDIR=                             #Directory where SysV init parameter fil
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
-DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.openwrt

@@ -3,22 +3,24 @@
 #
 # Input: host=openwrt
 #
-PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+HOST=openwrt
-SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+PREFIX=/usr                             
-LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.
+SHAREDIR=${PREFIX}/share                
-PERLLIBDIR=${PREFIX}/share/shorewall    #Directory to install Shorewall Perl module directory
+LIBEXECDIR=${PREFIX}/share              
-CONFDIR=/etc                            #Directory where subsystem configurations are installed
+PERLLIBDIR=${PREFIX}/share/shorewall    
-SBINDIR=/sbin                           #Directory where system administration programs are installed
+CONFDIR=/etc                            
-MANDIR=                                 #Directory where manpages are installed.
+SBINDIR=/sbin                           
-INITDIR=/etc/init.d                     #Directory where SysV init scripts are installed.
+MANDIR=${PREFIX}/man                    
-INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITDIR=/etc/init.d                     
-INITSOURCE=init.openwrt.sh              #Name of the distributed file to be installed as the SysV init script
+INITSOURCE=init.openwrt.sh
-ANNOTATED=                              #If non-zero, annotated configuration files are installed
+INITFILE=$PRODUCT                       
-SYSCONFDIR=${CONFDIR}/sysconfig         #Directory where SysV init parameter files are installed
+AUXINITSOURCE=
-SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed in $SYSCONFDIR
+AUXINITFILE=
-SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=                             
-SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEFILE=                            
-SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+SYSCONFFILE=default.openwrt
-VARLIB=/lib                             #Directory where product variable data is stored.
+SYSCONFDIR=${CONFDIR}/sysconfig
-VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+SPARSE=                                 
-DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf
+ANNOTATED=                              
+VARLIB=/lib
+VARDIR=${VARLIB}/$PRODUCT               

Shorewall-core/shorewallrc.redhat

@@ -21,4 +21,3 @@ SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter fil
 SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                         #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
-DEFAULT_PAGER=				#Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.slackware

@@ -22,4 +22,3 @@ SYSCONFDIR=                                #Name of the directory where SysV ini
 ANNOTATED=                                 #If non-empty, install annotated configuration files
 VARLIB=/var/lib                            #Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT                  #Directory where product variable data is stored.
-DEFAULT_PAGER=				   #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.suse

@@ -7,18 +7,17 @@ PREFIX=/usr                                           #Top-level directory for s
 CONFDIR=/etc                                          #Directory where subsystem configurations are installed
 SHAREDIR=${PREFIX}/share                              #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/lib                              #Directory for executable scripts.
-PERLLIBDIR=${PREFIX}/lib/perl5/site-perl              #Directory to install Shorewall Perl module directory
+PERLLIBDIR=${PREFIX}/lib/perl5/vendor_perl/5.14.2     #Directory to install Shorewall Perl module directory
 SBINDIR=/usr/sbin                                     #Directory where system administration programs are installed
 MANDIR=${SHAREDIR}/man/                               #Directory where manpages are installed.
 INITDIR=/etc/init.d                                   #Directory where SysV init scripts are installed.
-INITFILE=                                             #Name of the product's SysV init script
+INITFILE=$PRODUCT                                     #Name of the product's SysV init script
 INITSOURCE=init.suse.sh                               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                                            #If non-zero, annotated configuration files are installed
-SERVICEDIR=/usr/lib/systemd/system                    #Directory where .service files are installed (systems running systemd only)
+SERVICEDIR=                                           #Directory where .service files are installed (systems running systemd only)
-SERVICEFILE=$PRODUCT.service          		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEFILE=                      		      #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFFILE=sysconfig                                 #Name of the distributed file to be installed in $SYSCONFDIR
 SYSCONFDIR=/etc/sysconfig/                            #Directory where SysV init parameter files are installed
 SPARSE=                                               #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib                                       #Directory where persistent product data is stored.
 VARDIR=${VARLIB}/$PRODUCT                             #Directory where product variable data is stored.
-DEFAULT_PAGER=				   	      #Pager to use if none specified in shorewall[6].conf

Shorewall-core/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://www.shorewall.net
 #
@@ -27,8 +27,6 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx #The Build script inserts the actual version
-PRODUCT="shorewall-core"
-Product="Shorewall Core"
 
 usage() # $1 = exit status
 {
@@ -68,11 +66,6 @@ remove_file() # $1 = file to restore
     fi
 }
 
-#
-# Change to the directory containing this script
-#
-cd "$(dirname $0)"
-
 #
 # Read the RC file
 #
@@ -81,6 +74,7 @@ if [ $# -eq 0 ]; then
 	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
 	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
 	. /usr/share/shorewall/shorewallrc
     else
@@ -116,7 +110,6 @@ fi
 echo "Uninstalling Shorewall Core $VERSION"
 
 rm -rf ${SHAREDIR}/shorewall
-rm -f ~/.shorewallrc
 
 echo "Shorewall Core Uninstalled"
 

Shorewall-init/README.txt

@@ -0,0 +1 @@
+This is the Shorewall-init stable 4.4 branch of Git.

Shorewall-init/ifupdown.debian.sh

@@ -31,10 +31,8 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall ]; then
+	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall compile
+	    ${SBINDIR}/$PRODUCT compile
-	elif [ $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall -6 compile
 	fi
     fi
 }
@@ -130,7 +128,7 @@ for PRODUCT in $PRODUCTS; do
     setstatedir
 
     if [ -x $VARLIB/$PRODUCT/firewall ]; then
-	( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
+	  ( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
     fi
 done
 

Shorewall-init/ifupdown.fedora.sh

@@ -33,11 +33,9 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ ! -x $STATEDIR/firewall ]; then
+    if [ ! -x "$STATEDIR/firewall" ]; then
-	if [ $PRODUCT = shorewall ]; then
+	if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
-	    ${SBINDIR}/shorewall compile
+	    ${SBINDIR}/$PRODUCT $OPTIONS compile
-	elif [ $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall -6 compile
 	fi
     fi
 }

Shorewall-init/ifupdown.suse.sh

@@ -31,10 +31,8 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall ]; then
+	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall compile
+	    ${SBINDIR}/$PRODUCT compile
-	elif [ $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall -6 compile
 	fi
     fi
 }

Shorewall-init/init.debian.sh

@@ -30,7 +30,7 @@
 # Required-Stop:     $local_fs
 # X-Stop-After:      $network
 # Default-Start:     S
-# Default-Stop:      0 1 6
+# Default-Stop:      0 6
 # Short-Description: Initialize the firewall at boot time
 # Description:       Place the firewall in a safe state at boot time prior to
 #                    bringing up the network
@@ -73,10 +73,8 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall compile
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi

Shorewall-init/init.fedora.sh

@@ -44,10 +44,8 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
-	${SBINDIR}/shorewall compile
+	${SBINDIR}/$PRODUCT $OPTIONS compile -c
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi

Shorewall-init/init.openwrt.sh

@@ -1,133 +0,0 @@
-#!/bin/sh /etc/rc.common
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
-#
-#     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
-#
-#       On most distributions, this file should be called /etc/init.d/shorewall-init.
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-#       You should have received a copy of the GNU General Public License
-#       along with this program; if not, write to the Free Software
-#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-#
-
-# arg1 of init script is arg2 when rc.common is sourced
-
-case "$action" in
-  start|stop|boot)
-      if [ "$(id -u)" != "0" ]
-      then
-	  echo "You must be root to start, stop or restart \"Shorewall \"."
-	  exit 1
-      fi
-
-      # check if shorewall-init is configured or not
-      if [ -f "/etc/sysconfig/shorewall-init" ]
-      then
-	  . /etc/sysconfig/shorewall-init
-	  if [ -z "$PRODUCTS" ]
-	  then
-	      exit 0
-	  fi
-      else
-	  exit 0
-      fi
-
-      ;;
-  enable|disable|enabled)
-      # Openwrt related
-      # start and stop runlevel variable
-      START=19
-      STOP=91
-      ;;
-  *)
-      echo "Usage: /etc/init.d/shorewall-init {start|stop}"
-      exit 1
-esac
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-
-# Locate the current PRODUCT's statedir
-setstatedir() {
-    local statedir
-    if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
-	statedir=$( . ${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
-    fi
-
-    [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
-
-    if [ $PRODUCT = shorewall ]; then
-	${SBINDIR}/shorewall compile
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
-    else
-	return 0
-    fi
-}
-
-# Initialize the firewall
-start () {
-    local PRODUCT
-  local STATEDIR
-
-  echo -n "Initializing \"Shorewall-based firewalls\": "
-  for PRODUCT in $PRODUCTS; do
-      if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
-	  fi
-      fi
-  done
-
-  if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-      ipset -R < "$SAVE_IPSETS"
-  fi
-}
-
-boot () {
-    start
-}
-
-# Clear the firewall
-stop () {
-    local PRODUCT
-    local STATEDIR
-
-    echo -n "Clearing \"Shorewall-based firewalls\": "
-    for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
-	fi
-    done
-
-    if [ -n "$SAVE_IPSETS" ]; then
-	mkdir -p $(dirname "$SAVE_IPSETS")
-	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
-	fi
-    fi
-}
-

Shorewall-init/init.suse.sh

@@ -79,10 +79,8 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall compile
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi

Shorewall-init/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Init
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-20114 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2010 - Roberto C. Sanchez (roberto@connexer.com)
 #
 #       Shorewall documentation is available at http://shorewall.net
@@ -28,8 +28,6 @@
 #
 
 VERSION=xxx #The Build script inserts the actual version.
-PRODUCT=shorewall-init
-Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -73,50 +71,39 @@ mywhich() {
     return 2
 }
 
+run_install()
+{
+    if ! install $*; then
+	echo
+	echo "ERROR: Failed to install $*" >&2
+	exit 1
+    fi
+}
+
 cant_autostart()
 {
     echo
     echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
 }
 
-install_file() # $1 = source $2 = target $3 = mode
-{
-    if cp -f $1 $2; then
-	if chmod $3 $2; then
-	    if [ -n "$OWNER" ]; then
-		if chown $OWNER:$GROUP $2; then
-		    return
-		fi
-	    else
-		return 0
-	    fi
-	fi
-    fi
-
-    echo "ERROR: Failed to install $2" >&2
-    exit 1
-}
-
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod 0755 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-}
-
 require() 
 {
     eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
 }
 
-#
+install_file() # $1 = source $2 = target $3 = mode
-# Change to the directory containing this script
+{
-#
+    run_install $T $OWNERSHIP -m $3 $1 ${2}
+}
+
 cd "$(dirname $0)"
 
+PRODUCT=shorewall-init
+
 #
 # Parse the run line
 #
+T='-T'
 
 finished=0
 configure=1
@@ -164,10 +151,10 @@ if [ $# -eq 0 ]; then
     #
     if [ -f ./shorewallrc ]; then
 	. ./shorewallrc || exit 1
-	file=./shorewallrc
+	file=~/.shorewallrc
     elif [ -f ~/.shorewallrc ]; then
 	. ~/.shorewallrc || exit 1
-	file=~/.shorewallrc
+	file=./.shorewallrc
      else
 	fatal_error "No configuration file specified and ~/.shorewallrc not found"
     fi
@@ -243,8 +230,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=slackware
 	    elif [ -f /etc/arch-release ] ; then
 		BUILD=archlinux
-	    elif [ -f ${CONFDIR}/openwrt_release ]; then
-		BUILD=openwrt
 	    else
 		BUILD=linux
 	    fi
@@ -252,24 +237,22 @@ if [ -z "$BUILD" ]; then
     esac
 fi
 
+[ -n "$OWNER" ] || OWNER=$(id -un)
+[ -n "$GROUP" ] || GROUP=$(id -gn)
+
 case $BUILD in
     apple)
-	[ -z "$OWNER" ] && OWNER=root
+	T=
-	[ -z "$GROUP" ] && GROUP=wheel
+	;;
+    debian|gentoo|redhat|suse|slackware|archlinux)
 	;;
-    cygwin*|CYGWIN*)
-	OWNER=$(id -un)
-	GROUP=$(id -gn)
- 	;;
     *)
-	if [ $(id -u) -eq 0 ]; then
+	[ -n "$BUILD" ] && echo "ERROR: Unknown BUILD environment ($BUILD)" >&2 || echo "ERROR: Unknown BUILD environment"
-	    [ -z "$OWNER" ] && OWNER=root
+	exit 1
-	    [ -z "$GROUP" ] && GROUP=root
-	fi
 	;;
 esac
 
-[ -n "$OWNER" ] && OWNERSHIP="$OWNER:$GROUP"
+OWNERSHIP="-o $OWNER -g $GROUP"
 
 [ -n "$HOST" ] || HOST=$BUILD
 
@@ -294,9 +277,6 @@ case "$HOST" in
     suse)
 	echo "Installing SuSE-specific configuration..."
 	;;
-    openwrt)
-	echo "Installing Openwrt-specific configuration..."
-	;;
     linux)
 	echo "ERROR: Shorewall-init is not supported on this system" >&2
 	exit 1
@@ -310,12 +290,12 @@ esac
 [ -z "$TARGET" ] && TARGET=$HOST
 
 if [ -n "$DESTDIR" ]; then
-    if [ $(id -u) != 0 ] ; then
+    if [ `id -u` != 0 ] ; then
 	echo "Not setting file owner/group permissions, not running as root."
 	OWNERSHIP=""
     fi
     
-    make_directory ${DESTDIR}${INITDIR} 0755
+    install -d $OWNERSHIP -m 755 ${DESTDIR}${INITDIR}
 fi
 
 echo "Installing Shorewall Init Version $VERSION"
@@ -331,7 +311,7 @@ fi
 
 if [ -n "$DESTDIR" ]; then
     mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
-    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
 fi
 
 #
@@ -359,14 +339,14 @@ fi
 if [ -n "$SERVICEDIR" ]; then
     mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
+    run_install $OWNERSHIP -m 644 $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
     if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
 	mkdir -p ${DESTDIR}${SBINDIR}
-        chmod 0755 ${DESTDIR}${SBINDIR}
+        chmod 755 ${DESTDIR}${SBINDIR}
     fi
-    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
+    run_install $OWNERSHIP -m 700 shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
     echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
@@ -375,13 +355,13 @@ fi
 # Create /usr/share/shorewall-init if needed
 #
 mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
-chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 755 ${DESTDIR}${SHAREDIR}/shorewall-init
 
 #
 # Install logrotate file
 #
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
+    run_install $OWNERSHIP -m 0644 logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -389,7 +369,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
+chmod 644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 
 #
 # Remove and create the symbolic link to the init script
@@ -412,7 +392,7 @@ if [ $HOST = debian ]; then
 
     if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
 	if [ -n "${DESTDIR}" ]; then
-	    mkdir -p ${DESTDIR}${ETC}/default
+	    mkdir ${DESTDIR}${ETC}/default
 	fi
 
 	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
@@ -432,9 +412,6 @@ else
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
-	    elif [ $HOST = openwrt ]; then
-		# Not implemented on openwrt
-		/bin/true
 	    else
 		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
@@ -442,8 +419,8 @@ else
     fi
 
     if [ -n "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-	install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT 0644
+	run_install $OWNERSHIP -m 0644 ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/$PRODUCT
-	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     [ $HOST = suse ] && IFUPDOWN=ifupdown.suse.sh || IFUPDOWN=ifupdown.fedora.sh
@@ -453,15 +430,13 @@ fi
 # Install the ifupdown script
 #
 
-if [ $HOST != openwrt ]; then
+cp $IFUPDOWN ifupdown
-    cp $IFUPDOWN ifupdown
 
-    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
+[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
+mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 
-    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
+install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
-fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
     [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
@@ -514,7 +489,7 @@ case $HOST in
 esac
 
 if [ -z "$DESTDIR" ]; then
-    if [ $configure -eq 1 -a -n "first_install" ]; then
+    if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable ${PRODUCT}.service; then
@@ -536,13 +511,6 @@ if [ -z "$DESTDIR" ]; then
 	    else
 		cant_autostart
 	    fi
-	elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-	    /etc/init.d/$PRODUCT enable
-	    if /etc/init.d/$PRODUCT enabled; then
-		echo "$Product will start automatically at boot"
-	    else
-		cant_autostart
-	    fi
 	elif [ $HOST = gentoo ]; then
 	    # On Gentoo, a service must be enabled manually by the user,
 	    # not by the installer
@@ -571,13 +539,6 @@ if [ -z "$DESTDIR" ]; then
 		else
 		    cant_autostart
 		fi
-	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
-		/etc/init.d/$PRODUCT enable
-		if /etc/init.d/shorewall-init enabled; then
-		    echo "$Product will start automatically at boot"
-		else
-		    cant_autostart
-		fi
 	    else
 		cant_autostart
 	    fi
@@ -585,7 +546,7 @@ if [ -z "$DESTDIR" ]; then
     fi
 else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
-	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
+	if [ $HOST = debian ]; then
 	    if [ -n "${DESTDIR}" ]; then
 		mkdir -p ${DESTDIR}/etc/rcS.d
 	    fi

Shorewall-init/shorewall-init

@@ -33,10 +33,8 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall compile
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
     else
 	return 0
     fi

Shorewall-init/shorewall-init.service

@@ -5,8 +5,7 @@
 #
 [Unit]
 Description=Shorewall firewall (bootup security)
-Before=network-pre.target
+Before=network.target
-Wants=network-pre.target
 
 [Service]
 Type=oneshot

Shorewall-init/shorewall-init.service.214

@@ -0,0 +1,20 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall firewall (bootup security)
+Before=network-pre.target
+Wants=network-pre.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target

Shorewall-init/shorewall-init.service.214.debian

@@ -0,0 +1,21 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#     Copyright 2015 Tom Eastep <teastep@shorewall.net>
+#
+[Unit]
+Description=Shorewall firewall (bootup security)
+Before=network-pre.target
+Wants=network-pre.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/default/shorewall-init
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-init start
+ExecStop=/sbin/shorewall-init stop
+
+[Install]
+WantedBy=basic.target

Shorewall-init/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
@@ -27,8 +27,6 @@
 #       shown below. Simply run this script to remove Shorewall Firewall
 
 VERSION=xxx  #The Build script inserts the actual version
-PRODUCT=shorewall-init
-Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
@@ -77,11 +75,6 @@ remove_file() # $1 = file to restore
     fi
 }
 
-#
-# Change to the directory containing this script
-#
-cd "$(dirname $0)"
-
 finished=0
 configure=1
 
@@ -126,6 +119,7 @@ if [ $# -eq 0 ]; then
 	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
 	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
 	. /usr/share/shorewall/shorewallrc
     else
@@ -168,11 +162,7 @@ INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
 if [ -f "$INITSCRIPT" ]; then
     if [ $configure -eq 1 ]; then
-	if [ $HOST = openwrt ]; then
+	if mywhich updaterc.d ; then
-	    if /etc/init.d/shorewall-init enabled; then
-		/etc/init.d/shorewall-init disable
-	    fi
-	elif mywhich updaterc.d ; then
 	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
             insserv -r $INITSCRIPT
@@ -193,13 +183,8 @@ if [ -n "$SERVICEDIR" ]; then
     rm -f $SERVICEDIR/shorewall-init.service
 fi
 
-if [ $HOST = openwrt ]; then
+[ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
-    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
-else
-    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
-fi
 
 remove_file ${CONFDIR}/default/shorewall-init
 remove_file ${CONFDIR}/sysconfig/shorewall-init
@@ -213,6 +198,8 @@ remove_file ${CONFDIR}/network/if-post-down.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-up.d/shorewall
 remove_file ${CONFDIR}/sysconfig/network/if-down.d/shorewall
 
+[ -n "$SYSTEMD" ] && remove_file ${SYSTEMD}/shorewall.service
+
 if [ -d ${CONFDIR}/ppp ]; then
     for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
 	remove_file ${CONFDIR}/ppp/$directory/shorewall

Shorewall-lite/README.txt

@@ -0,0 +1 @@
+This is the Shorewall-lite stable 4.4 branch of Git.

Shorewall-lite/default.openwrt

@@ -0,0 +1,25 @@
+# sysV init file script configuration(/etc/sysconfdir/shorewall-lite)
+
+# startup option(default "-vvv")
+OPTIONS=
+
+# change default start run level(if none empty; /etc/init.d/shorewall-lite enable)
+START=50
+
+# change default stop run level(if none empty; /etc/init.d/shorewall-lite enable)
+STOP=
+
+# option to pass when shorewall start is executed
+STARTOPTIONS=
+
+# option to pass when shorewall restart is executed
+RESTARTOPTIONS=
+
+# option to pass when shorewall reload is executed
+RELOADOPTIONS=
+
+# option to pass when shorewall stop is executed
+STOPOPTIONS=
+
+# option to pass when shorewall status is executed
+STATUSOPTIONS=

Shorewall-lite/init.debian.sh

@@ -5,7 +5,7 @@
 # Required-Start:    $network $remote_fs
 # Required-Stop:     $network $remote_fs
 # Default-Start:     S
-# Default-Stop:      0 1 6
+# Default-Stop:      0 6
 # Short-Description: Configure the firewall at boot time
 # Description:       Configure the firewall according to the rules specified in
 #                    /etc/shorewall-lite
@@ -13,7 +13,7 @@
 
 . /lib/lsb/init-functions
 
-SRWL='/sbin/shorewall -l'
+SRWL=/sbin/shorewall-lite
 SRWL_OPTS="-tvv"
 test -n ${INITLOG:=/var/log/shorewall-lite-init.log}
 
@@ -92,11 +92,10 @@ shorewall_start () {
 
 # stop the firewall
 shorewall_stop () {
+  echo -n "Stopping \"Shorewall firewall\": "
   if [ "$SAFESTOP" = 1 ]; then
-      echo -n "Stopping \"Shorewall Lite firewall\": "
       $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
   else
-      echo -n "Clearing all \"Shorewall Lite firewall\" rules: "
       $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
   fi
   return 0

Shorewall-lite/init.fedora.sh

@@ -25,7 +25,7 @@
 #
 . /usr/share/shorewall/shorewallrc
 
-prog="shorewall -l"
+prog="shorewall-lite"
 shorewall="${SBINDIR}/$prog"
 logger="logger -i -t $prog"
 lockfile="/var/lock/subsys/$prog"

Shorewall-lite/init.openwrt.sh

@@ -32,24 +32,25 @@
 #	   shorewall-lite start			  Starts the firewall
 #	   shorewall-lite restart		  Restarts the firewall
 #	   shorewall-lite reload		  Reload the firewall
+#						  (same as restart)
 #	   shorewall-lite stop			  Stops the firewall
 #	   shorewall-lite status		  Displays firewall status
 #
 
 # description: Packet filtering firewall
 
-# Openwrt related
+# openwrt stuph
-# Start and stop runlevel variable
+# start and stop runlevel variable
-START=50
+#START=21
-STOP=89
+#STOP=91
-# Displays the status command
+# variable to display what the status command do when /etc/init.d/shorewall-lite is invoke without argument
 EXTRA_COMMANDS="status"
-EXTRA_HELP=" status Displays firewall status"
+EXTRA_HELP="Displays shorewall status"
 
 ################################################################################
 # Get startup options (override default)
 ################################################################################
-OPTIONS=
+OPTIONS="-vvv"
 
 #
 # The installer may alter this
@@ -60,35 +61,38 @@ if [ -f ${SYSCONFDIR}/shorewall-lite ]; then
     . ${SYSCONFDIR}/shorewall-lite
 fi
 
+START=${START:-21}
+STOP=${STOP:-91}
+
 SHOREWALL_INIT_SCRIPT=1
 
 ################################################################################
 # E X E C U T I O N    B E G I N S   H E R E				       #
 ################################################################################
-# Arg1 of init script is arg2 when rc.common is sourced; set to action variable
+# arg1 of init script is arg2 when rc.common is sourced; set to action variable
 command="$action"
 
 start() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STARTOPTIONS
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STARTOPTIONS:-$@}
 }
 
 boot() {
-	local command="start"
+local command="start"
-	start
+start
 }
 
 restart() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RESTARTOPTIONS
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${RESTARTOPTIONS:-$@}
 }
 
 reload() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RELOADOPTION
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${RELOADOPTION:-$@}
 }
 
 stop() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STOPOPTIONS
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STOPOPTIONS:-$@}
 }
 
 status() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $@
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command ${STATUSOPTIONS:-$@}
 }

Shorewall-lite/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Lite
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -114,7 +114,7 @@ require()
 #
 cd "$(dirname $0)"
 
-if [ -f shorewall-lite.service ]; then
+if [ -f shorewall-lite ]; then
     PRODUCT=shorewall-lite
     Product="Shorewall Lite"
 else
@@ -331,6 +331,7 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
+    make_directory ${DESTDIR}${SBINDIR} 755
     make_directory ${DESTDIR}${INITDIR} 755
 
 else
@@ -361,9 +362,9 @@ else
 fi
 
 #
-# Check for ${SHAREDIR}/$PRODUCT/version
+# Check for ${SBINDIR}/$PRODUCT
 #
-if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
+if [ -f ${DESTDIR}${SBINDIR}/$PRODUCT ]; then
     first_install=""
 else
     first_install="Yes"
@@ -371,15 +372,17 @@ fi
 
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
+install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
 [ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
 
+echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
+
 #
 # Create ${CONFDIR}/$PRODUCT, /usr/share/$PRODUCT and /var/lib/$PRODUCT if needed
 #
 mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT
 mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
-mkdir -p ${DESTDIR}${SBINDIR}
 mkdir -p ${DESTDIR}${VARDIR}
 
 chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
@@ -492,10 +495,10 @@ done
 # Install the Man Pages
 #
 
-if [ -d manpages -a -n "$MANDIR" ]; then
+if [ -d manpages ]; then
     cd manpages
 
-    mkdir -p ${DESTDIR}${MANDIR}/man5/
+    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
@@ -503,8 +506,6 @@ if [ -d manpages -a -n "$MANDIR" ]; then
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
-    mkdir -p ${DESTDIR}${MANDIR}/man8/
-
     for f in *.8; do
 	gzip -c $f > $f.gz
 	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
@@ -539,11 +540,6 @@ delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.common
 delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.cli
 delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/wait4ifup
 
-#
-#  Creatae the symbolic link for the CLI
-#
-ln -sf shorewall ${DESTDIR}${SBINDIR}/${PRODUCT}
-
 #
 # Note -- not all packages will have the SYSCONFFILE so we need to check for its existance here
 #
@@ -554,11 +550,12 @@ if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PR
     fi
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
-    echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+    echo "$SYSCONFFILE installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
 fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
     eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then

Shorewall-lite/shorecap

@@ -45,20 +45,19 @@
 #    require Shorewall to be installed.
 
 
-PRODUCT=shorewall-lite
+g_program=shorewall-lite
 
 #
 # This is modified by the installer when ${SHAREDIR} != /usr/share
 #
 . /usr/share/shorewall/shorewallrc
 
-g_basedir=${SHAREDIR}/shorewall
+g_sharedir="$SHAREDIR"/shorewall-lite
+g_confdir="$CONFDIR"/shorewall-lite
+g_readrc=1
 
 . ${SHAREDIR}/shorewall/lib.cli
-
+. /usr/share/shorewall-lite/configpath
-setup_product_environment
-
-. ${SHAREDIR}/shorewall-lite/configpath
 
 [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 

Shorewall-lite/shorewall-lite

@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+#     Shorewall Lite Packet Filtering Firewall Control Program - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014 -
+#         Tom Eastep (teastep@shorewall.net)
+#
+#	Shorewall documentation is available at http://www.shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
+#
+################################################################################################
+PRODUCT=shorewall-lite
+
+#
+# This is modified by the installer when ${SHAREDIR} != /usr/share
+#
+. /usr/share/shorewall/shorewallrc
+
+g_program=$PRODUCT
+g_sharedir="$SHAREDIR"/shorewall-lite
+g_confdir="$CONFDIR"/shorewall-lite
+g_readrc=1
+
+. ${SHAREDIR}/shorewall/lib.cli
+
+shorewall_cli $@

Shorewall-lite/shorewall-lite.service.214

@@ -0,0 +1,21 @@
+#
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall
+#
+#     Copyright 2011 Jonathan Underwood <jonathan.underwood@gmail.com>
+#
+[Unit]
+Description=Shorewall IPv4 firewall (lite)
+Wants=network-online.target
+After=network-online.target
+Conflicts=iptables.service firewalld.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=-/etc/sysconfig/shorewall-lite
+StandardOutput=syslog
+ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
+ExecStop=/sbin/shorewall-lite $OPTIONS stop
+
+[Install]
+WantedBy=basic.target

Shorewall-lite/sysconfig

@@ -1,26 +0,0 @@
-#
-# Global start/restart/reload/stop options
-#
-OPTIONS=""
-
-#
-# Start options
-#
-STARTOPTIONS=""
-
-#
-# Restart options
-#
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
-# EOF

Shorewall-lite/uninstall.sh

@@ -2,7 +2,7 @@
 #
 # Script to back uninstall Shoreline Firewall
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.sourceforge.net
 #
@@ -28,7 +28,6 @@
 
 VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-lite
-Product="Shorewall Lite"
 
 usage() # $1 = exit status
 {
@@ -125,6 +124,7 @@ if [ $# -eq 0 ]; then
 	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
 	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
 	. /usr/share/shorewall/shorewallrc
     else
@@ -205,16 +205,14 @@ fi
 rm -f ${SBINDIR}/shorewall-lite
 
 rm -rf ${CONFDIR}/shorewall-lite
-rm -rf ${VARDIR}
+rm -rf ${VARDIR}/shorewall-lite
 rm -rf ${SHAREDIR}/shorewall-lite
 rm -rf ${LIBEXECDIR}/shorewall-lite
 rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
 rm -f  ${SYSCONFDIR}/shorewall-lite
 
-if [ -n "${MANDIR}" ]; then
+rm -f ${MANDIR}/man5/shorewall-lite*
-    rm -f ${MANDIR}/man5/shorewall-lite*
+rm -f ${MANDIR}/man8/shorewall-lite*
-    rm -f ${MANDIR}/man8/shorewall-lite*
-fi
 
 echo "Shorewall Lite Uninstalled"
 

Shorewall/Macros/macro.AMQP

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.AMQP
+# Shorewall - AMQP Macro
 #
-# This macro handles AMQP traffic.
+# /usr/share/shorewall/macro.AMQP
+#
+#	This macro handles AMQP traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5672
 PARAM	-	-	udp	5672

Shorewall/Macros/macro.A_AllowICMPs

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.A_AllowICMPs
+# Shorewall - Audited AllowICMPs Macro
 #
-# This macro audits and accepts needed ICMP types.
+# /usr/share/shorewall/macro.A_AllowICMPs
+#
+#	This macro A_ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE
+#ACTION		SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#					PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.A_DropDNSrep

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.A_DropDNSrep
+# Shorewall - Audited DropDNSrep Macro
 #
-# This macro audits and drops DNS UDP replies.
+# /usr/share/shorewall/macro.A_DropDNSrep
+#
+#	This macro silently audites and drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.A_DropUPnP

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.A_DropUPnP
+# Shorewall - ADropUPnP Macro
 #
-# This macro audits and drops UPnP probes on UDP port 1900.
+# /usr/share/shorewall/macro.A_DropUPnP
+#
+#	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.ActiveDir

@@ -1,13 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.ActiveDir
+# Shorewall - Samba 4 Macro
+#
+# /usr/share/shorewall/macro.ActiveDir
+#
+#       This macro handles ports for Samba 4 Active Directory Service
+#
+# You can comment out the ports you do not want open
 #
-# This macro handles ports for Samba 4 Active Directory Service.
-# You can copy this file to /etc/shorewall[6]/ and comment out the ports you
-# do not want open.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM   -       -       tcp     389 	#LDAP services
 PARAM   -       -       udp	389  
 PARAM   -       -       tcp     636	#LDAP SSL

Shorewall/Macros/macro.AllowICMPs

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
+# Shorewall - AllowICMPs Macro
 #
-# This macro ACCEPTs needed ICMP types.
+# /usr/share/shorewall/macro.AllowICMPs
+#
+#	This macro ACCEPTs needed ICMP types
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Needed ICMP types
 

Shorewall/Macros/macro.Amanda

@@ -1,12 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Amanda
+# Shorewall - Amanda Macro
 #
-# This macro handles connections required by the AMANDA backup system
+# /usr/share/shorewall/macro.Amanda
-# to back up remote nodes.  It does not provide the ability to restore
+#
-# files from those nodes.
+#	This macro handles connections required by the AMANDA backup system
+#	to back up remote nodes.  It does not provide the ability to restore
+#	files from those nodes.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __AMANDA_HELPER )
  PARAM	-	-	udp	10080 { helper=amanda }

Shorewall/Macros/macro.Auth

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Auth
+# Shorewall - Auth Macro
 #
-# This macro handles Auth (identd) traffic.
+# /usr/share/shorewall/macro.Auth
+#
+#	This macro handles Auth (identd) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	113

Shorewall/Macros/macro.BGP

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.BGP
+# Shorewall - BGP Macro
 #
-# This macro handles BGP4 traffic.
+# /usr/share/shorewall/macro.BGP
+#
+#	This macro handles BGP4 traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	179	# BGP4

Shorewall/Macros/macro.BLACKLIST

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.blacklist
+# Shorewall - blacklist Macro
 #
-# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
+# /usr/share/shorewall/macro.blacklist
+#
+#	This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if $BLACKLIST_LOGLEVEL
 blacklog
 ?else

Shorewall/Macros/macro.BitTorrent

@@ -1,16 +1,19 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.BitTorrent
+# Shorewall - BitTorrent Macro
 #
-# This macro handles BitTorrent traffic for BitTorrent 3.1 and earlier.
+# /usr/share/shorewall/macro.BitTorrent
 #
-# If you are running BitTorrent 3.2 or later, you should use the
+#	This macro handles BitTorrent traffic for BitTorrent 3.1 and earlier.
-# BitTorrent32 macro.
+#
+#	If you are running BitTorrent 3.2 or later, you should use the
+#	BitTorrent32 macro.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6889
 #
 # It may also be necessary to allow UDP traffic:
 #
 PARAM	-	-	udp	6881
+#

Shorewall/Macros/macro.BitTorrent32

@@ -1,13 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.BitTorrent32
+# Shorewall - BitTorrent 3.2 Macro
 #
-# This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
+# /usr/share/shorewall/macro.BitTorrent32
+#
+#	This macro handles BitTorrent traffic for BitTorrent 3.2 and later.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6881:6999
 #
 # It may also be necessary to allow UDP traffic:
 #
 PARAM	-	-	udp	6881
+#

Shorewall/Macros/macro.CVS

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.CVS
+# Shorewall - CVS Macro
 #
-# This macro handles connections to the CVS pserver.
+# /usr/share/shorewall/macro.CVS
+#
+#	This macro handles connections to the CVS pserver.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2401

Shorewall/Macros/macro.Citrix

@@ -1,12 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Citrix
+# Shorewall - Citrix/ICA Macro
 #
-# This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
+# /usr/share/shorewall/macro.Citrix
-# ICA Session Reliability)
+#
+#	This macro handles Citrix/ICA traffic (ICA, ICA Browser, CGP a.k.a.
+#	ICA Session Reliability)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	1494	# ICA
 PARAM	-	-	udp	1604	# ICA Browser
 PARAM	-	-	tcp	2598	# CGP Session Reliabilty

Shorewall/Macros/macro.DAAP

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DAAP
+# Shorewall - DAAP Macro
 #
-# This macro handles DAAP (Digital Audio Access Protocol) traffic.
+# /usr/share/shorewall/macro.DAAP
-# The protocol is used by iTunes, Rythmbox and other similar daemons.
+#
+#	This macro handles DAAP (Digital Audio Access Protocol) traffic.
+#	The protocol is used by iTunes, Rythmbox and other similar daemons.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3689
 PARAM	-	-	udp	3689

Shorewall/Macros/macro.DCC

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DCC
+# Shorewall - DCC Macro
 #
-# This macro handles DCC (Distributed Checksum Clearinghouse) traffic.
+# /usr/share/shorewall/macro.DCC
-# DCC is a distributed spam filtering mechanism.
+#
+#	This macro handles DCC (Distributed Checksum Clearinghouse) traffic.
+#	DCC is a distributed spam filtering mechanism.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	6277

Shorewall/Macros/macro.DHCPfwd

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DHCPfwd
+# Shorewall - DHCPfwd Macro
 #
-# This macro (bidirectional) handles forwarded DHCP traffic
+# /usr/share/shorewall/macro.DHCPfwd
+#
+#	This macro (bidirectional) handles forwarded DHCP traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	67:68	67:68	# DHCP
 PARAM	DEST	SOURCE	udp	67:68	67:68	# DHCP

Shorewall/Macros/macro.DNS

@@ -1,10 +1,12 @@
 #
-# Shorewall --  /usr/share/shorewall/macro.DNS
+# Shorewall - DNS Macro
 #
-# This macro handles DNS traffic.
+# /usr/share/shorewall/macro.DNS
+#
+#	This macro handles DNS traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	53
 PARAM	-	-	tcp	53

Shorewall/Macros/macro.Distcc

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Distcc
+# Shorewall - Distcc Macro
 #
-# This macro handles connections to the Distributed Compiler service.
+# /usr/share/shorewall/macro.Distcc
+#
+#	This macro handles connections to the Distributed Compiler service.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3632

Shorewall/Macros/macro.Drop

@@ -1,15 +1,18 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Drop
+# Shorewall - Drop Macro
 #
-# This macro generates the same rules as the Drop default action
+# /usr/share/shorewall/macro.Drop
-# It is used in place of action.Drop when USE_ACTIONS=No.
 #
-# Example:
+#	This macro generates the same rules as the Drop default action
+#	It is used in place of action.Drop when USE_ACTIONS=No.
 #
-#	Drop	net	all
+#	Example:
+#
+#		Drop	net	all
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 #
 # Don't log 'auth' DROP
 #

Shorewall/Macros/macro.DropDNSrep

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
+# Shorewall - DropDNSrep Macro
 #
-# This macro silently drops DNS UDP replies
+# /usr/share/shorewall/macro.DropDNSrep
+#
+#	This macro silently drops DNS UDP replies
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT Late DNS Replies
 

Shorewall/Macros/macro.DropUPnP

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.DropUPnP
+# Shorewall - DropUPnP Macro
 #
-# This macro silently drops UPnP probes on UDP port 1900
+# /usr/share/shorewall/macro.DropUPnP
+#
+#	This macro silently drops UPnP probes on UDP port 1900
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?COMMENT UPnP
 

Shorewall/Macros/macro.Edonkey

@@ -1,31 +1,34 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Edonkey
+# Shorewall - Edonkey Macro
 #
-# This macro handles Edonkey traffic.
+# /usr/share/shorewall/macro.Edonkey
 #
-# http://www.portforward.com/english/routers/port_forwarding/2wire/1000s/eDonkey.htm
+#	This macro handles Edonkey traffic.
-# says to use udp 5737 rather than 4665.
 #
-# http://www.amule.org/wiki/index.php/FAQ_ed2k says this:
 #
-# 4661 TCP (outgoing) Port, on which a server listens for connection
+#	http://www.portforward.com/english/routers/port_forwarding/2wire/1000s/eDonkey.htm
-# (defined by server).
+#	says to use udp 5737 rather than 4665.
 #
-# 4665 UDP (outgoing) used for global server searches and global source
+#	http://www.amule.org/wiki/index.php/FAQ_ed2k says this:
-# queries. This is always Server TCP port (in this case 4661) + 4.
 #
-# 4662 TCP (outgoing and incoming) Client to client transfers.
+#	4661 TCP (outgoing) Port, on which a server listens for connection
+#	(defined by server).
 #
-# 4672 UDP (outgoing and incoming) Extended eMule protocol, Queue
+#	4665 UDP (outgoing) used for global server searches and global source
-# Rating, File Reask Ping
+#	queries. This is always Server TCP port (in this case 4661) + 4.
 #
-# 4711 TCP WebServer listening port.
+#	4662 TCP (outgoing and incoming) Client to client transfers.
 #
-# 4712 TCP External Connection port. Used to communicate aMule with other
+#	4672 UDP (outgoing and incoming) Extended eMule protocol, Queue
-# applications such as aMule WebServer or aMuleCMD.
+#	Rating, File Reask Ping
+#
+#	4711 TCP WebServer listening port.
+#
+#	4712 TCP External Connection port. Used to communicate aMule with other
+#	applications such as aMule WebServer or aMuleCMD.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	4662
 PARAM	-	-	udp	4665

Shorewall/Macros/macro.FTP

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.FTP
+# Shorewall - FTP Macro
 #
-# This macro handles FTP traffic.
+# /usr/share/shorewall/macro.FTP
+#
+#	This macro handles FTP traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __FTP_HELPER  )
  PARAM	-	-	tcp	21 { helper=ftp }
 ?else

Shorewall/Macros/macro.Finger

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Finger
+# Shorewall - Finger Macro
 #
-# This macro handles Finger protocol.
+# /usr/share/shorewall/macro.Finger
-# You should not generally open your finger information to internet.
+#
+#	This macro handles Finger protocol. You should not generally open
+#	your finger information to internet.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	79

Shorewall/Macros/macro.GNUnet

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.GNUnet
+# Shorewall - GNUnet Macro
 #
-# This macro handles GNUnet (secure peer-to-peer networking) traffic.
+# /usr/share/shorewall/macro.GNUnet
+#
+#	This macro handles GNUnet (secure peer-to-peer networking) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	2086
 PARAM	-	-	udp	2086
 PARAM	-	-	tcp	1080

Shorewall/Macros/macro.GRE

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.GRE
+# Shorewall - GRE Macro
 #
-# This macro (bidirectional) handles Generic Routing Encapsulation (GRE).
+# /usr/share/shorewall/macro.GRE
+#
+#	This macro (bi-directional) handles Generic Routing Encapsulation
+#	traffic (RFC 1701)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	47	# GRE
 PARAM	DEST	SOURCE	47	# GRE

Shorewall/Macros/macro.Git

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Git
+# Shorewall - Git Macro
 #
-# This macro handles Git traffic.
+# /usr/share/shorewall/macro.Git
+#
+#	This macro handles Git traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9418

Shorewall/Macros/macro.Gnutella

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Gnutella
+# Shorewall - Gnutella Macro
 #
-# This macro handles Gnutella traffic.
+# /usr/share/shorewall/macro.Gnutella
+#
+#	This macro handles Gnutella traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	6346
 PARAM	-	-	udp	6346

Shorewall/Macros/macro.Goto-Meeting

@@ -1,11 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Goto-Meeting
+# Shorewall - Citrix/Goto Meeting macro
 #
-# This macro handles Citrix/Goto Meeting.
+# /usr/share/shorewall/macro.Goto-Meeting
-#
+#          by Eric Teeter
-###############################################################################
+#       This macro handles Citrix/Goto Meeting
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#       Assumes that ports 80 and 443 are already open
-
+#       If needed, use the macros that open Http and Https to reduce redundancy
-PARAM      -    -       tcp     8200    # Goto Meeting only needed outbound
+####################################################################################
-HTTP
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-HTTPS
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
+PARAM      -    -       tcp     8200    # Goto Meeting only needed (TCP outbound)

Shorewall/Macros/macro.HKP

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.HKP
+# Shorewall - HKP Macro
 #
-# This macro handles OpenPGP HTTP keyserver protocol traffic.
+# /usr/share/shorewall/macro.HKP
+#
+#	This macro handles OpenPGP HTTP keyserver protocol traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	11371

Shorewall/Macros/macro.HTTP

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.HTTP
+# Shorewall - HTTP Macro
 #
-# This macro handles plaintext HTTP (WWW) traffic.
+# /usr/share/shorewall/macro.HTTP
+#
+#	This macro handles plaintext HTTP (WWW) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	80

Shorewall/Macros/macro.HTTPS

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.HTTPS
+# Shorewall - HTTPS Macro
 #
-# This macro handles HTTPS (WWW over TLS) traffic.
+# /usr/share/shorewall/macro.HTTPS
+#
+#	This macro handles HTTPS (WWW over SSL) traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	443

Shorewall/Macros/macro.ICPV2

@@ -1,9 +1,11 @@
 #
-# Shorewall - /usr/share/shorewall/macro.ICPV2
+# Shorewall - ICPV2 Macro
 #
-# This macro handles Internet Cache Protocol V2 (Squid) traffic.
+# /usr/share/shorewall/macro.ICPV2
+#
+#	This macro handles Internet Cache Protocol V2 (Squid) traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	3130

Shorewall/Macros/macro.ICQ

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.ICQ
+# Shorewall - ICQ Macro
 #
-# This macro handles ICQ, now called AOL Instant Messenger (or AIM).
+# /usr/share/shorewall/macro.ICQ
+#
+#	This macro handles ICQ, now called AOL Instant Messenger (or AIM).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5190

Shorewall/Macros/macro.ILO

@@ -1,13 +1,15 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.ILO
+# Shorewall - ILO Macro
 #
-# This macro handles console redirection with HP ILO 2+,
+# /usr/share/shorewall/macro.ILO
-# Use this macro to open access to your ILO interface from management
+#
-# workstations.
+#	This macro handles console redirection with HP ILO 2+,
+#	Use this macro to open access to your ILO interface from management
+#	workstations.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	3002		# Raw serial data
 PARAM	-	-	tcp	9300		# Shared Remote Console
 PARAM	-	-	tcp	17988		# Virtual Media

Shorewall/Macros/macro.IMAP

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IMAP
+# Shorewall - IMAP Macro
 #
-# This macro handles plaintext and STARTTLS IMAP traffic.
+# /usr/share/shorewall/macro.IMAP
-# For SSL (TLS) IMAP, see macro.IMAPS.
+#
+#	This macro handles plaintext IMAP traffic.  For encrypted IMAP,
+#	see macro.IMAPS.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	143

Shorewall/Macros/macro.IMAPS

@@ -1,11 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IMAPS
+# Shorewall - IMAPS Macro
 #
-# This macro handles SSL (TLS) IMAP traffic.
+# /usr/share/shorewall/macro.IMAPS
-# For plaintext (not recommended) and STARTLS (recommended) IMAP see
+#
-# macro.IMAP.
+#	This macro handles encrypted IMAP traffic.  For plaintext IMAP
+#	(not recommended), see macro.IMAP.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	993

Shorewall/Macros/macro.IPIP

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPIP
+# Shorewall - IPIP Macro
 #
-# This macro (bidirectional) handles IPIP capsulation traffic
+# /usr/share/shorewall/macro.IPIP
+#
+#	This macro (bidirectional) handles IPIP capsulation traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	94	# IPIP
 PARAM	DEST	SOURCE	94	# IPIP

Shorewall/Macros/macro.IPMI

@@ -1,15 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPMI
+# Shorewall - IPMI Macro
 #
-# This macro handles IPMI console redirection with RMCP protocol.
+# /usr/share/shorewall/macro.IPMI
-# Tested to work with with Asus (AMI),
+#
-# Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
+#	This macro handles IPMI console redirection with Asus (AMI),
-# Use this macro to open access to your IPMI interface from management
+#	Dell DRAC5+ (Avocent), and Supermicro (Aten or AMI).
-# workstations.
+#	Use this macro to open access to your IPMI interface from management
+#	workstations.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
 PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)

Shorewall/Macros/macro.IPP

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPP
+# Shorewall - IPP Macro
 #
-# This macro handles Internet Printing Protocol (IPP).
+# /usr/share/shorewall/macro.IPP
+#
+#	This macro handles Internet Printing Protocol (IPP).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	631

Shorewall/Macros/macro.IPPbrd

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPPbrd
+# Shorewall - IPP Broadcast Macro
 #
-# This macro handles Internet Printing Protocol (IPP) broadcasts.
+# /usr/share/shorewall/macro.IPPbrd
-# If you also need to handle TCP 631 connections in the opposite
+#
-# direction, use the IPPserver Macro
+#	This macro handles Internet Printing Protocol (IPP) broadcasts.
+#       If you also need to handle TCP 631 connections in the opposite
+#       direction, use the IPPserver Macro
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	631

Shorewall/Macros/macro.IPPserver

@@ -1,28 +1,29 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPPserver
+# Shorewall - IPPserver Macro
 #
-# This macro handles Internet Printing Protocol (IPP), indicating
+# /usr/share/shorewall/macro.IPPserver
-# that DEST is a printing server for SOURCE.  The macro allows
-# print queue broadcasts from the server to the client, and
-# printing connections from the client to the server.
 #
-# Example usage on a single-interface firewall which is a print client:
+#	This macro handles Internet Printing Protocol (IPP), indicating
+#	that DEST is a printing server for SOURCE.  The macro allows
+#	print queue broadcasts from the server to the client, and
+#	printing connections from the client to the server.
 #
-#	IPPserver(ACCEPT)	$FW	net
+#	Example usage on a single-interface firewall which is a print
+#	client:
+#		IPPserver/ACCEPT $FW net
 #
-# Example for a two-interface firewall which acts as a print server for loc:
+#	Example for a two-interface firewall which acts as a print
+#	server for loc:
+#		IPPserver/ACCEPT loc $FW
 #
-#	IPPserver(ACCEPT)	loc	$FW
+#	NOTE: If you want both to serve requests for local printers and
-#
+#	listen to requests for remote printers (i.e. your CUPS server is
-# NOTE: If you want both to serve requests for local printers and listen to
+#	also a client), you need to apply the rule twice, e.g.
-# requests for remote printers (i.e. your CUPS server is also a client),
+#		IPPserver/ACCEPT loc $FW
-# you need to apply the rule twice, e.g.
+#		IPPserver/ACCEPT $FW loc
-#
-#	IPPserver(ACCEPT)	loc	$FW
-#	IPPserver(ACCEPT)	$FW	loc
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	SOURCE	DEST	tcp	631
 PARAM	DEST	SOURCE	udp	631

Shorewall/Macros/macro.IPsec

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPsec
+# Shorewall - IPsec Macro
 #
-# This macro (bidirectional) handles IPsec traffic
+# /usr/share/shorewall/macro.IPsec
+#
+#	This macro (bidirectional) handles IPsec traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	50			# ESP
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecah

@@ -1,12 +1,14 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPsecah
+# Shorewall - IPsecah Macro
 #
-# This macro (bidirectional) handles IPsec authentication (AH) traffic.
+# /usr/share/shorewall/macro.IPsecah
-# This is insecure. You should use ESP with encryption for security.
+#
+#	This macro (bidirectional) handles IPsec authentication (AH) traffic.
+#       This is insecure. You should use ESP with encryption for security.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	500	# IKE
 PARAM	-	-	51			# AH
 PARAM	DEST	SOURCE	udp	500	500	# IKE

Shorewall/Macros/macro.IPsecnat

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IPsecnat
+# Shorewall - IPsecnat Macro
 #
-# This macro (bidirectional) handles IPsec traffic and Nat-Traversal
+# /usr/share/shorewall/macro.IPsecnat
+#
+#	This macro (bidirectional) handles IPsec traffic and Nat-Traversal
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	500	# IKE
 PARAM	-	-	udp	4500	# NAT-T
 PARAM	-	-	50		# ESP

Shorewall/Macros/macro.IRC

@@ -1,10 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.IRC
+# Shorewall IRC Macro
 #
-# This macro handles IRC traffic (Internet Relay Chat).
+# /usr/share/shorewall/macro.IRC
+#
+#	This macro handles IRC traffic (Internet Relay Chat).
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 
 ?if ( __CT_TARGET && ! $AUTOHELPERS && __IRC_HELPER  )
  PARAM	-	-	tcp	6667 { helper=irc }

Shorewall/Macros/macro.JAP

@@ -1,14 +1,17 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.JAP
+# Shorewall - JAP Macro
 #
-# This macro handles JAP Anon Proxy Mix server traffic.
+# /usr/share/shorewall/macro.JAP
-# It is NOT for people trying to browse anonymously!
+#
+#	This macro handles JAP Anon Proxy traffic.  This macro is for
+#	administrators running a Mix server.  It is NOT for people trying
+#	to browse anonymously!
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	8080 # HTTP port
 PARAM	-	-	tcp	6544 # HTTP port
 PARAM	-	-	tcp	6543 # InfoService port
-HTTPS
+HTTPS(PARAM)
-SSH
+SSH(PARAM)

Shorewall/Macros/macro.Jabber

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Jabber
+# Shorewall - Jabber Macro
 #
-# This macro handles Jabber traffic.
+# /usr/share/shorewall/macro.Jabber
+#
+#	This macro accepts Jabber traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5222

Shorewall/Macros/macro.JabberPlain

@@ -1,9 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.JabberPlain
+# Shorewall - JabberPlain Macro
 #
-# This macro is deprecated - use of macro.Jabber instead is recommended.
+# /usr/share/shorewall/macro.JabberPlain
+#
+#	This macro accepts Jabber traffic (plaintext). This macro is
+#	deprecated - use of macro.Jabber instead is recommended.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 Jabber

Shorewall/Macros/macro.JabberSecure

@@ -1,9 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.JabberSecure
+# Shorewall - JabberSecure (SSL) Macro
 #
-# This macro handles deprecated Jabber (SSL) traffic. Use STARTTLS instead.
+# /usr/share/shorewall/macro.JabberSecure
+#
+#	This macro accepts Jabber traffic (SSL). Use of Jabber with SSL
+#	is deprecated, please configure Jabber with STARTTLS and use
+#	Jabber macro instead.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5223

Shorewall/Macros/macro.Jabberd

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Jabberd
+# Shorewall - Jabberd (server intercommunication)
 #
-# This macro handles Jabberd intercommunication traffic
+# /usr/share/shorewall/macro.Jabberd
+#
+#	This macro accepts Jabberd intercommunication traffic
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	5269

Shorewall/Macros/macro.Jetdirect

@@ -1,9 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Jetdirect
+# Shorewall - Jetdirect Macro
 #
-# This macro handles HP Jetdirect printing.
+# /usr/share/shorewall/macro.Jetdirect
+#
+#	This macro handles HP Jetdirect printing.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	9100

Shorewall/Macros/macro.Kerberos

@@ -1,10 +1,12 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.Kerberos
+# Shorewall - Kerberos Macro
 #
-# This macro handles Kerberos traffic.
+# /usr/share/shorewall/macro.Kerberos
+#
+#	This macro handles Kerberos traffic.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	88
 PARAM	-	-	udp	88

Shorewall/Macros/macro.L2TP

@@ -1,11 +1,13 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.L2TP
+# Shorewall - L2TP Macro
 #
-# This macro (bidirectional) handles Layer 2 Tunneling Protocol traffic.
+# /usr/share/shorewall/macro.L2TP
-# (RFC 2661)
+#
+#	This macro (bidirectional) handles Layer 2 Tunneling Protocol traffic
+#	(RFC 2661)
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	udp	1701	# L2TP
 PARAM	DEST	SOURCE	udp	1701	# L2TP

Shorewall/Macros/macro.LDAP

@@ -1,14 +1,16 @@
 #
-# Shorewall -- /usr/share/shorewall/macro.LDAP
+# Shorewall - LDAP Macro
 #
-# This macro handles plaintext LDAP traffic. For encrypted LDAP
+# /usr/share/shorewall/macro.LDAP
-# traffic, see macro.LDAPS.  Use of LDAPS is recommended (and is
+#
-# required by some directory services) if you want to do user
+#	This macro handles plaintext LDAP traffic.  For encrypted LDAP
-# authentication over LDAP.  Note that some LDAP implementations
+#	traffic, see macro.LDAPS.  Use of LDAPS is recommended (and is
-# support initiating TLS connections via the plaintext LDAP port.
+#	required by some directory services) if you want to do user
-# Consult your LDAP server documentation for details.
+#	authentication over LDAP.  Note that some LDAP implementations
+#	support initiating TLS connections via the plaintext LDAP port.
+#	Consult your LDAP server documentation for details.
 #
 ###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#ACTION	SOURCE	DEST	PROTO	DEST	SOURCE	ORIGIN	RATE	USER/
-
+#				PORT(S)	PORT(S)	DEST	LIMIT	GROUP
 PARAM	-	-	tcp	389