Compare commits

...

338 Commits

Author SHA1 Message Date
Tom Eastep
84cd80eba9 Update the Shared Config document
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-17 16:51:35 -07:00
Tom Eastep
9b02f7a922 Update Shared config article
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-15 19:15:13 -07:00
Tom Eastep
f1975ae9b0 More robust detection of empty SPD entries.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-15 08:26:27 -07:00
Tom Eastep
7b9f7c095d Don't dump SPD entries for the other address family
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-14 13:39:00 -07:00
Tom Eastep
8ea96098bf Warning when 'persistent' used with RESTORE_DEFAULT_ROUTE=Yes
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 15:22:07 -07:00
Tom Eastep
02ed36332a Revert "Warn when RESTORE_DEFAULT_ROUTE=Yes and a persistent provider is defined"
This reverts commit 39a3c72057.
2017-10-11 11:24:54 -07:00
Tom Eastep
15a3b29a32 Revert "Document warning when RESTORE_DEFAULT_ROUTE=Yes and 'persistent'"
This reverts commit bfab002dda.
2017-10-11 11:24:39 -07:00
Tom Eastep
cb4f9e7261 Don't restore default routes when there is an enabled fallback provider
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 11:24:13 -07:00
Tom Eastep
bfab002dda Document warning when RESTORE_DEFAULT_ROUTE=Yes and 'persistent'
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 11:01:09 -07:00
Tom Eastep
ddb12fcad9 Add/correct comments
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 11:00:46 -07:00
Tom Eastep
42ce754961 Don't restore default routes when a fallback= provider is enabled
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 11:00:05 -07:00
Tom Eastep
5cd4d63bc5 Delete main default routes when a fallback provider is enabled
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 10:59:31 -07:00
Tom Eastep
5b567f2d8b Correct delete_default_routes() in tables other than main
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 10:58:48 -07:00
Tom Eastep
39a3c72057 Warn when RESTORE_DEFAULT_ROUTE=Yes and a persistent provider is defined
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-11 10:58:09 -07:00
Tom Eastep
b47e633c38 Use 'route replace' rather than 'route add' to avoid persistence issues
Previous failure case was:

- disable interface
- reload
- enable interface

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-09 08:58:10 -07:00
Tom Eastep
1b55a37a28 Ensure that 'rule add' commands don't fail with persistent interfaces
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-08 08:53:53 -07:00
Tom Eastep
a97dcd23d0 Allow merging of rules that specify an IPSEC policy
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-07 13:17:43 -07:00
Tom Eastep
108b169d8d Treat LOG_TARGET like all other capabilities
- Previous implementation could generate unworkable script when
  LOAD_HELPERS_ONLY=Yes

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-06 08:01:52 -07:00
Tom Eastep
a9fbaa57ed Pass -$g_family to 'ip xfrm' commands
- This currently doesn't work correctly, but maybe it will in the future

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-10-06 08:00:29 -07:00
Tom Eastep
317f12041b Strengthen the test for empty SPD entries
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-30 15:43:17 -07:00
Tom Eastep
8469f983d8 Merge branch '5.1.7'
# Conflicts:
#	Shorewall/Perl/prog.footer
2017-09-29 15:25:37 -07:00
Tom Eastep
f54acb665a Correct handling of mark range in MARK target.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-29 14:44:33 -07:00
Tom Eastep
3d2e9eb93e Improve the fix for SELinux "getattr" denials
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-28 15:16:50 -07:00
Tom Eastep
c6a939301f Improve the fix for SELinux "getattr" denials
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-28 15:16:00 -07:00
Tom Eastep
1cb98254cc Handle SELinux getattr denials in open() processing
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-26 16:42:54 -07:00
Tom Eastep
baa791a1e3 Handle SELinux getattr denials in open() processing
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-26 16:41:50 -07:00
Tom Eastep
8b4b965f63 Remove unnecessary disable/enable of script generation
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-21 14:36:30 -07:00
Tom Eastep
8ee2d6246c Update a comment in the compiler
- get_configuration() also processes the shorewallrc file(s)

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-21 12:32:34 -07:00
Tom Eastep
a7be3dfece Align progress messages produced by 'reenable'
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 13:29:13 -07:00
Tom Eastep
846e8c4ece Correct reenable logic
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 13:29:08 -07:00
Tom Eastep
e2bf7e6584 Align progress messages produced by 'reenable'
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 13:28:09 -07:00
Tom Eastep
ff3994f6a1 Correct reenable logic
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 13:17:50 -07:00
Tom Eastep
494ec9c59c Avoid extra comparison in reload_command()
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 10:49:11 -07:00
Tom Eastep
1cde92e8f3 Initialize g_dockeringress
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 10:43:44 -07:00
Tom Eastep
721a1e3b33 Initialize g_dockeringress
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 10:39:52 -07:00
Tom Eastep
84fa774cb7 Change copyright dates in lib.runtime
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-19 09:03:00 -07:00
Tom Eastep
c39bc7b65f Update version of lib.*installer
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 13:09:35 -07:00
Tom Eastep
2548e8741d Update version and copyright dates in lib.common
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 13:07:37 -07:00
Tom Eastep
0a31fba6bb Update version and copyright dates in lib.core
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 13:00:50 -07:00
Tom Eastep
9701c9c522 Update version and copyright dates in lib.base
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 12:57:02 -07:00
Tom Eastep
973d352209 Update shorewall script
- Update copyright dates
- Add a comment about PRODUCT setting

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 12:51:27 -07:00
Tom Eastep
91e59c2ed4 Remove the Lite Makefiles
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 11:56:04 -07:00
Tom Eastep
be5aabcbfb Correct typo in Chains.pm
&g_dockeringress -> $g_dockeringress

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 10:14:22 -07:00
Tom Eastep
a8937e6bc8 Correct harmless typo
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 10:06:41 -07:00
Tom Eastep
e91bd9a0e9 Remove useless/empty .tmp file when SAVE_IPSETS is set
- Add SAVE_IPSETS support to the Redhat/Fedora sysv init script

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-18 09:28:43 -07:00
Tom Eastep
5e1cf17ebc DOCKER-INGRESS support
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-17 10:57:29 -07:00
Tom Eastep
85a7ec6fe5 Correct module loading in the compiler
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-14 15:08:38 -07:00
Tom Eastep
fb831e3128 Remove empty/useless ipsets tmp file in Shorewall-init
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-12 11:56:24 -07:00
Tom Eastep
2ed11c7e15 Default ADD_IP_ALIASES to 'No' in Shorewall6
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-12 11:55:53 -07:00
Tom Eastep
ef1353790e Correct VLSM editing in the 'ipcalc' command.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-12 10:53:41 -07:00
Tom Eastep
4f79d2e82b Move and simplify handling of nat columns
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-12 10:53:04 -07:00
Tom Eastep
e6a2ba78a4 Correct handling of DEST column during action invocation
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-08 10:05:37 -07:00
Tom Eastep
41ea3bdeda Modify the Event actions to handle NAT rules
- Separate DNAT and REDIRECT into DNAT- and REDIRECT- plus ACCEPT

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-08 09:47:12 -07:00
Tom Eastep
1065c2951b Allow NAT targets to be passed to the Event actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-08 09:46:03 -07:00
Tom Eastep
3b373f3f21 Correct handling of ipsets in the DEST column of the snat file
- Also corrected handling of exclusion

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-06 11:30:42 -07:00
Tom Eastep
0c05ab3bff Correct typo in shorewall-snat(5)
- missing ':' in IPv4 Example 4.

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-09-05 10:29:19 -07:00
Tom Eastep
ef3a33e3f4 Merge branch '5.1.6'
# Conflicts:
#	Shorewall-core/lib.common

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-30 15:02:23 -07:00
Tom Eastep
8a78fb6e77 Correct -p check for the conntrack utility's availability
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-29 09:06:36 -07:00
Tom Eastep
b54a691110 Improve dynamic gateway detection
- Use provider's routing table, if any

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-23 15:04:47 -07:00
Tom Eastep
90f33dd436 Eliminate MODULE_SUFFIX
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-23 12:48:14 -07:00
Tom Eastep
b7aef24d7c Delete useless line of code
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-23 12:18:29 -07:00
Tom Eastep
6f475cde3f Eliminate MODULE_SUFFIX
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-23 10:19:25 -07:00
Tom Eastep
6053a40af0 Apply Tuomo Soini's loadmodule patch
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-23 09:20:50 -07:00
Tom Eastep
7e4dba7623 Revert "Correct check for module already loaded"
This reverts commit 2e98d4375b.
2017-08-23 08:01:25 -07:00
Tom Eastep
3d322d31b7 Add UDP rule to macro.RDP
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-22 08:07:32 -07:00
Tom Eastep
34e4fffd7d Module suffix changes
- Re-order default list in the compiler to match lib.common
- MODULE_SUFFIX="ko ko.xz" in standard .conf files.

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-21 12:44:23 -07:00
Tom Eastep
2e98d4375b Correct check for module already loaded
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-21 10:27:29 -07:00
Tom Eastep
419ff8903b Invert logic in Shorewall::Chains::delete_reference() - better readability
- similar change in Shorewall::Chains::adjust_reference_counts()

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-19 12:25:27 -07:00
Tom Eastep
390ac30be8 Remove a superfluous line of code from Shorewall::Chains::format_rule()
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-19 12:12:54 -07:00
Tom Eastep
8cb98f16ea Add a comment in Shorewall::Chains::optimize_level8()
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-19 08:08:24 -07:00
Tom Eastep
5a9f179e25 Allow port variables as the server port in DNAT rules
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-16 15:36:18 -07:00
Tom Eastep
d8eca457de Correct typo in the Aliased Interfaces article.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-16 08:24:44 -07:00
Tom Eastep
8641d53bd1 Use MUTEX_TIMEOUT for ip[6]tables --wait interval
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-15 14:02:08 -07:00
Tom Eastep
7e3521e221 RESTORE_WAIT_OPTION
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-13 18:56:40 -07:00
Tom Eastep
0603f8e355 Serialize start of IPv4 and IPv6 under systemd
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-13 12:48:18 -07:00
Tom Eastep
ddefde2d10 Correct handling of address variables in DNAT rule.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-13 08:30:11 -07:00
Tom Eastep
2beeedd8fe Remove incorrect '+' info from shorewall-interfaces(5)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-12 12:19:00 -07:00
Tom Eastep
1a2647618e Allow runtime address variables as the server IP in DNAT rules
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-12 12:18:16 -07:00
Tom Eastep
72293883dd Tabify the Zones module
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-12 11:28:14 -07:00
Tom Eastep
c31397532c Verify that parent and child zones have a common interface
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-12 09:24:05 -07:00
Tom Eastep
d0861e813b Make Shorewall's handling of '+' consistent with that of iptables
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-12 08:22:57 -07:00
Tom Eastep
5d5bef105a Remove reference to swping from the shorewall-init article.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-11 13:38:58 -07:00
Tom Eastep
da62bd2b32 Use a hash slice in recently-added code
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-11 13:38:34 -07:00
Tom Eastep
a83c19cc33 Adjust some default values in shorewall.conf(5)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-10 15:48:16 -07:00
Tom Eastep
96a33395e8 Correct typo in the Squid document
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-09 15:42:19 -07:00
Tom Eastep
dabe8abe52 Add 'action' to the conntrack columns for alternate input
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-09 12:41:45 -07:00
Tom Eastep
a504820d19 Correct optimize level 8 handling of policy and policychain
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-07 16:56:30 -07:00
Matt Darfeuille
8db4265ccc docs: Clarify path for locating Shorewall files
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-07 13:48:47 -07:00
Tom Eastep
4c2c1bcdf1 Export CONFDIR and SHAREDIR to the generated script.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-06 13:42:01 -07:00
Tom Eastep
f2ee8013fc Update the providers manpage re balanced IPv6 routes
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-05 10:12:42 -07:00
Tom Eastep
56c8f70b52 Describe the parameters passed to the enable and disable extension scripts
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-04 12:38:14 -07:00
Tom Eastep
657215f9b5 Add sample enabled and disabled scripts
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-03 12:50:49 -07:00
Tom Eastep
5589ab76d9 Add arguments to the enabled and disabled user exits
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-03 12:44:15 -07:00
Tom Eastep
ec0e6763e4 add 'enabled' and 'disabled' to the Extension Script Article
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-02 15:44:48 -07:00
Tom Eastep
6425e5ae5d Remove superfluous white space in the generated script
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-02 14:09:05 -07:00
Tom Eastep
8521c6f750 Merge branch '5.1.5' 2017-08-02 14:02:03 -07:00
Tom Eastep
c57edb0fbf Update FAQ2* to use address variables
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-08-01 14:56:20 -07:00
Tom Eastep
80e6cd8a2f Add enabled and disabled user exits
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-29 15:15:57 -07:00
Tom Eastep
69a0061d0f Correct handling of MAC addresses in the accounting file.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-27 14:55:19 -07:00
Tom Eastep
5a24953e6c Merge branch '5.1.5' 2017-07-27 09:14:50 -07:00
Tom Eastep
eea3cca90c Correct handling of USER/GROUP in the OUTPUT accounting section
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-27 09:01:46 -07:00
Tom Eastep
a420ef04d9 Correct tcfilter source port handling when BASIC_FILTERS=Yes
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-26 16:48:53 -07:00
Tom Eastep
e573436b12 Correct tcfilter source port handling when BASIC_FILTERS=Yes
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-23 12:14:57 -07:00
Tom Eastep
7f44473387 Correct some typos in the Install article
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-23 10:44:46 -07:00
Tom Eastep
cf9773c4de Update FAQ 76 to make it non-Debian specific
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-21 16:56:08 -07:00
Tom Eastep
939f0e92a5 Allow configure.pl to recognize $SOURCE_DATE_EPOCH
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-20 15:18:50 -07:00
Tom Eastep
320d448684 Apply Bernhard M. Wiedemann's patch for configure...
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-20 15:18:41 -07:00
Tom Eastep
975a14b94f Allow configure.pl to recognize $SOURCE_DATE_EPOCH
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-20 14:48:40 -07:00
Tom Eastep
cf3c304078 Apply Bernhard M. Wiedemann's patch for configure...
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-20 14:19:39 -07:00
Tom Eastep
d1a21fb678 Revert "Add SHARED_CONFIG option to shorewallrc"
This reverts commit 4e978b687d.
2017-07-20 12:23:59 -07:00
Tom Eastep
b9b7baf98d Merge branch '5.1.5' 2017-07-20 10:37:53 -07:00
Tom Eastep
92e725de97 Remove link to non-existent blog
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-16 09:23:02 -07:00
Tom Eastep
922bd9eeca Implement SPARSE=Very
- Only installs the .conf file.

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-09 16:18:09 -07:00
Tom Eastep
d2b3fa476a Correct VLSM (56->60) in the Shared Config Document
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-09 16:17:16 -07:00
Tom Eastep
4e978b687d Add SHARED_CONFIG option to shorewallrc
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-07 08:25:33 -07:00
Tom Eastep
2d0cb5c2d8 Process the snat file if the masq file is empty
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-06 09:09:52 -07:00
Tom Eastep
d9dc6bcfe2 Merge branch 'master' into 5.1.5 2017-07-06 07:48:51 -07:00
Tom Eastep
ff51915b4f Add the shared config document to the index
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-06 07:48:03 -07:00
Tom Eastep
1ad796ba5d Add Warning to Squid document
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-02 18:11:42 -07:00
Tom Eastep
c8e2b4ae28 Add Shared Configs Document
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-07-02 18:11:16 -07:00
Tom Eastep
9d160d4342 Add RESTORE_DEFAULT_ROUTE to shorewall6.conf samples
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-27 15:50:56 -07:00
Tom Eastep
1301848315 Change .conf files to specify USE_NFLOG_SIZE=No
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-26 10:46:16 -07:00
Tom Eastep
f050fc6e05 Avoid issues with Perl 5.30
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 20:57:48 -07:00
Tom Eastep
61b6898782 Add dropBcasts action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 18:36:54 -07:00
Tom Eastep
aee8c14ea6 Correct update setting of USE_NFLOG_SIZE
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 17:10:44 -07:00
Tom Eastep
ff2323b249 Add the USE_NFLOG_SIZE option
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 16:54:14 -07:00
Tom Eastep
b4a06e9656 NFLOG_SIZE capability
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 13:44:26 -07:00
Tom Eastep
4122021344 Improve editing of port numbers/service names
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 07:44:23 -07:00
Tom Eastep
71d50e0217 Use --nflog-size rather than --nflog-range
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-25 07:43:39 -07:00
Tom Eastep
1b6f15d577 Correct multiple fallback providers
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-23 07:41:23 -07:00
Tom Eastep
7515520b46 Don't use symlinks for shorewall6 manpages
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-22 13:57:00 -07:00
Tom Eastep
1e2030fd6f Document leading "+" in inline matches
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-22 13:56:39 -07:00
Tom Eastep
708644f7c9 Clarify isusable and persistent providers
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-21 14:26:11 -07:00
Tom Eastep
2f5687c65a Don't generate multihop routes unnecessarily
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-18 09:37:41 -07:00
Tom Eastep
66d1fbd3aa Clean up shorewall[6].conf(5)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-17 10:39:46 -07:00
Tom Eastep
c410459e27 Correct install of section 5 manpages
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-17 10:30:49 -07:00
Tom Eastep
987e54cd54 Move shorewall6-proxyndp.xml to Shorewall/manpages/shorewall-proxyndp.xml
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-17 09:07:28 -07:00
Tom Eastep
42a46d42b6 Centralize the complete list of manpages in shorewall(8)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-16 17:11:43 -07:00
Tom Eastep
d8ef934f24 Consolidate manpages between Shorewall and Shorewall6
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-16 15:01:41 -07:00
Tom Eastep
62a60ad995 Add comments around functions moved from IPAddrs.pm to Chains.pm.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-14 12:26:22 -07:00
Tom Eastep
b1ba05db2b Correct handling of port ranges and port variables
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-12 17:07:55 -07:00
Tom Eastep
57f7cb4f3c Runtime Port Variables
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-12 11:55:56 -07:00
Tom Eastep
4cf60258af Correct a runtime error with NFQUEUE.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-12 11:07:54 -07:00
Tom Eastep
1061644ac7 Clean up links in the manpages
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-06-08 15:43:59 -07:00
Tom Eastep
4a262c0e1b Add FIN action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-31 08:28:27 -07:00
Tom Eastep
29ffb7eb4b Merge branch '5.1.4' 2017-05-31 08:23:07 -07:00
Tom Eastep
a775fdcb7c Remove stutter from the .conf manpages
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-31 08:21:45 -07:00
Tom Eastep
6338aa42b0 Add BLACKLIST to IPv6 actions.std file
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-26 07:39:09 -07:00
Tom Eastep
12a32d3a6b Update LOGFORMAT documentation
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-26 07:33:34 -07:00
Tom Eastep
45d96a5d64 Clean up the introductory part of shorewall-rules.xml
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-19 08:02:42 -07:00
Tom Eastep
f21d6de4d6 Clean up the introductory part of shorewall-rules.xml
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-17 15:28:51 -07:00
Tom Eastep
965a8e8f68 Minor cleanup of the Config module
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-15 09:29:12 -07:00
Tom Eastep
eb26a467e9 Add snat and mangle to %config_files
- Tabify initialization of %config_files

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-12 08:37:54 -07:00
Tom Eastep
28e3218041 Update the copyrights on the two- and three-interface HOWTOs
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-11 15:51:28 -07:00
Tom Eastep
bb70a3637b Add PERL_HASH_SEED option
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-02 07:51:37 -07:00
Tom Eastep
6c20cc7c4f Inline the start_command::do_it() function in lib.cli-std
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-05-01 13:51:53 -07:00
Tom Eastep
d4e05f6163 Correct handling of IPv6 tunnel-src and tunnel-dst
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-04-23 08:36:22 -07:00
Tom Eastep
6201f37913 Clarify <filename> in the generated script's header
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-04-18 16:45:17 -07:00
Tom Eastep
7ee44d6b4b Correct a typo in the generated script's header syntax description
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-04-18 16:31:51 -07:00
Tom Eastep
363b8f9802 Correct validation of string interface options.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-04-13 06:48:14 -07:00
Tom Eastep
d365a9ff18 Merge branch 'master' of ssh://git.code.sf.net/p/shorewall/code 2017-04-05 20:15:10 -07:00
Tom Eastep
00d4724fd8 Some cleanup of the Chains module
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-04-05 20:14:13 -07:00
Matt Darfeuille
749c8047d8 Explain the 'ipset' package
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Roberto C. Sánchez <roberto@connexer.com>
2017-04-05 11:50:36 -04:00
Tom Eastep
a00f2e6365 Update Copyright on the Documentation Index
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-31 20:34:43 -07:00
Tom Eastep
a46f19899b Correct typo in links to the logging article.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-27 16:12:56 -07:00
Tom Eastep
d2392c3a9b Add IPv6 UPnP Support
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-24 09:54:36 -07:00
Tom Eastep
0763b27b0b Correct a comment
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-22 15:59:55 -07:00
Tom Eastep
8b90827611 Minor cleanup of split_columns()
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-22 10:18:07 -07:00
Tom Eastep
8507c97b5a Clean up column/value pair editing.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-22 09:46:52 -07:00
Tom Eastep
a6306f2c08 ?reset action param now sets parmsmodified.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-18 12:53:05 -07:00
Tom Eastep
a79dc194a4 Re-factor the directive message change
- results in much more compact code
- Document change in the config basics doc

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-18 11:42:53 -07:00
Tom Eastep
ccf9d73c72 Clarify line continuation WRT params and .conf
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-17 19:13:29 -07:00
Tom Eastep
bdcf93f92c Report the call site when issuing messages from an action.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-17 17:08:19 -07:00
Tom Eastep
6b84727886 Delete useless blank line
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-17 13:26:07 -07:00
Tom Eastep
5f445d9c2b Merge branch '5.1.3' 2017-03-16 14:14:20 -07:00
Tom Eastep
31bd10ffdd Correct two-interface sample snat file
- s/92/192/

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-15 21:18:23 -07:00
Tom Eastep
c3303067fc Correct all+ handling in the policy file
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-15 11:20:37 -07:00
Tom Eastep
55cf06d0a8 Correct all+ handling in the policy file
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-15 10:09:53 -07:00
Tom Eastep
c36a7cd35b Correct typo in the Shorewall6 sample .conf files.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-15 08:57:18 -07:00
Tom Eastep
561efa595c Correct typo in the Shorewall6 sample .conf files.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-15 08:55:41 -07:00
Tom Eastep
158f6305b1 Correct install fix
- Also remove extra logic from action.Broadcast

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-14 14:39:25 -07:00
Tom Eastep
6407520a35 Add warning messages to the deprecated actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-14 14:32:28 -07:00
Tom Eastep
54336eaa80 Delete IPv6 actions that are now handled by their IPv4 counterparts
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-14 14:24:17 -07:00
Tom Eastep
5b85627fb8 Merge branch '5.1.3'
Conflicts:
	Shorewall/Perl/Shorewall/Config.pm
	Shorewall6/Actions/action.Multicast
2017-03-14 14:16:47 -07:00
Tom Eastep
a00d7217e3 Correct last commit
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-14 13:58:59 -07:00
Tom Eastep
54ef4e4ced Delete deprecated actions during install
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-14 13:46:24 -07:00
Tom Eastep
a447d726fa Revert change which screwed up ?begin perl ... ?end perl line numbering
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-14 12:44:33 -07:00
Tom Eastep
c6050f9fbb Correct log message from IPv6 Multicast action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 16:55:45 -07:00
Tom Eastep
fe29adbd66 Correct use of $family in combined actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 16:52:16 -07:00
Tom Eastep
4dc6be6b3b Deprecate A_AllowICMPs
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 15:09:07 -07:00
Tom Eastep
6ebc8f4266 Merge branch '5.1.3' 2017-03-13 14:55:23 -07:00
Tom Eastep
c5c4211081 Unify actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 14:54:25 -07:00
Tom Eastep
4010f9bce4 Add multicast to the Deprecated A_Drop and A_Reject actions
- Move A_Drop to deprecated/ directory

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 14:18:23 -07:00
Tom Eastep
02bb717d7d Quote SMURF_LOG_LEVEL setting
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 11:21:13 -07:00
Tom Eastep
046998ed84 Tabification of new actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 11:19:35 -07:00
Tom Eastep
24a014655b Quote all _DEFAULT settings in the sample .conf files
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 11:00:29 -07:00
Tom Eastep
0b8945da8e Correctly handle expansion of option names
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 10:20:15 -07:00
Tom Eastep
da363880a9 Always quote the LEVEL and DEFAULT settings when updating
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-13 09:51:58 -07:00
Tom Eastep
b049d1805d Merge branch 'master' of ssh://git.code.sf.net/p/shorewall/code
Conflicts:
	Shorewall/Perl/Shorewall/Config.pm
2017-03-13 08:52:01 -07:00
Tom Eastep
037fe490f3 Process config options in file order during update.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-12 17:09:41 -07:00
Tom Eastep
a8d7675322 Process config options in file order during update.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-12 09:01:22 -07:00
Tom Eastep
b13014c9ab Expand variables in .conf except when upgrading
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-11 11:21:07 -08:00
Tom Eastep
76aef6cb04 Correct generation of '! --syn'
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-11 08:43:04 -08:00
Tom Eastep
4c72b3ee58 Make sure that $LOG_LEVEL is defined
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-10 11:06:23 -08:00
Tom Eastep
d9071c5308 Correct $LOG_LEVEL expansion
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-10 10:24:24 -08:00
Tom Eastep
5729be6431 Add dropInvalid to BLACKLIST_DEFAULT
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-10 09:06:41 -08:00
Tom Eastep
1a381f717c Revert "Remove Multicast from the shorewall6.conf samples"
This reverts commit 655f260cb6.
2017-03-10 08:54:05 -08:00
Tom Eastep
c534c458dd Revert "Remove Multicast from IPv6 Policy Actions"
This reverts commit 85d571d013.
2017-03-10 08:53:54 -08:00
Tom Eastep
61435936fe Correct CONFIG_PATH in IPv6 Universal sample
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-09 14:06:47 -08:00
Tom Eastep
2d4c1411bd Delete the -n option from remote-reload in shorewall(8)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-09 13:17:23 -08:00
Tom Eastep
655f260cb6 Remove Multicast from the shorewall6.conf samples
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-09 13:16:52 -08:00
Tom Eastep
85d571d013 Remove Multicast from IPv6 Policy Actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-09 13:12:03 -08:00
Tom Eastep
fdb78898fc Make TC_ENABLED=Shared the default in the samples
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-09 13:06:55 -08:00
Tom Eastep
d4c016d9c5 'reload' documentation corrections
- Add command synopsis to the manpage
- Correct command synopsis in help output

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-09 12:50:30 -08:00
Tom Eastep
3d8d5aa469 quote $LOG_LEVEL in shorewall[6].conf files
- Delete AllowICMPs from IPv4 policy action settings

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-08 14:16:24 -08:00
Tom Eastep
49811d24fa Correct convertion of tcrules->mangle when a writable mangle exists
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 15:21:45 -08:00
Tom Eastep
fe4aaee1b4 Fix typos in action.dropNotSyn
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 14:37:08 -08:00
Tom Eastep
0ec7bc846e Correct logging in inline policy actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 13:58:14 -08:00
Tom Eastep
dbcd4d9d16 Correct typo in action.AllowICMPs
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 13:57:05 -08:00
Tom Eastep
5a996cbda7 Change AllowICMPs to an inline action
Signed-off-by: Tom Eastep <teastep@shorewall.net>

Conflicts:
	Shorewall/actions.std
2017-03-07 13:56:44 -08:00
Tom Eastep
6019adaae5 Change macro.ICMPs to an inline action
Signed-off-by: Tom Eastep <teastep@shorewall.net>

Conflicts:
	Shorewall/actions.std
2017-03-07 13:54:52 -08:00
Tom Eastep
4f869c3506 More manpage updates for tcp:!syn
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 11:13:58 -08:00
Tom Eastep
e3c2874b21 Modify dropNotSyn to use {proto=6:!syn}
- also make the same change in the rejNotSyn audited case
2017-03-07 11:00:39 -08:00
Tom Eastep
e8a0142480 Document tcp:!syn support
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 10:48:24 -08:00
Tom Eastep
a4768776f7 Modify rejNotSyn to use new/corrected features
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 10:34:15 -08:00
Tom Eastep
8e000b158e Correct the handling of tcp-reset
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 10:33:51 -08:00
Tom Eastep
f1d1ab6411 Implement tcp:!syn in PROTO column
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-07 10:33:20 -08:00
Tom Eastep
cd103bb715 Correct rejNotSyn
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-06 16:01:31 -08:00
Tom Eastep
5f1370f1b4 Clear the firewall on Debian systemd 'stop' command
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-06 11:22:55 -08:00
Tom Eastep
dc53fa2665 Correct file/line from ?error
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-06 11:02:06 -08:00
Tom Eastep
71d9a03697 Update shorewall[6]-rules.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-05 14:29:57 -08:00
Tom Eastep
137d4bcc90 Alter logging behavior of Limit
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-05 13:03:57 -08:00
Tom Eastep
356d3fa2dd Correct new directives with respect to omitting
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-05 12:09:54 -08:00
Tom Eastep
80d93235b5 Eliminate builtin actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-05 12:09:33 -08:00
Tom Eastep
c1e7fce1c5 Report the file/line where action invoked
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-05 09:29:00 -08:00
Tom Eastep
63ec936f21 Remove determinism sorts 2017-03-04 19:05:33 -08:00
Tom Eastep
dabe0bd205 Set PERL_HASH_SEED to make compilation deterministic.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-04 18:48:48 -08:00
Tom Eastep
63cf7dd699 Revert "Move $test to the config module."
This reverts commit 876d76b294.
2017-03-04 18:45:40 -08:00
Matt Darfeuille
0b3a32b365 Change the preferred way to remove sysvinit script
- Correct typo in command
 - Correct spacing

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-04 09:03:59 -08:00
Matt Darfeuille
a839a6f7d0 init: Add parameter files for Debian
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-04 09:03:49 -08:00
Matt Darfeuille
fec967a41d Do not display where an executable is located
Use only the exit status of the function mywhich to determine which
command should be used to remove sysvinit script.

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-04 09:03:29 -08:00
Tom Eastep
a7d45e9566 Restore logging to the BLACKLIST action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-03 10:14:30 -08:00
Tom Eastep
876d76b294 Move $test to the config module.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-02 11:42:07 -08:00
Tom Eastep
9075a6dd7a Copy libs and footer when compiling for test
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-02 10:49:49 -08:00
Tom Eastep
c900e3e51c Merge branch '5.1.2' 2017-03-02 10:17:50 -08:00
Tom Eastep
e585ce04f4 Rename action.allowUPnP to action.allowinUPnP
- Allows 'show action allowinUPnP' to work correctly.

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-02 10:06:01 -08:00
Tom Eastep
61f5e3531c Rename action.allowUPnP to action.allowinUPnP
- Allows 'show action allowinUPnP' to work correctly.

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-03-02 10:05:31 -08:00
Tom Eastep
e8a5c45aae Correct FAQ 1e
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-25 09:10:40 -08:00
Tom Eastep
d20ad64739 Correct FAQ 1e
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-25 08:54:14 -08:00
Matt Darfeuille
7ffe8e4e4b shorewall: Document the -p option in installer
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-23 09:33:35 -08:00
Matt Darfeuille
7644e1d49f Update version and fix comment lines in rc files
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:29 -08:00
Matt Darfeuille
06c6a017d5 Use a specific parameter file for systemd script
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:25 -08:00
Matt Darfeuille
75fd8ccb37 Use a specific parameter file for sysvinit script
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:21 -08:00
Matt Darfeuille
c04845534a Use a common uninstaller for Lite and Lite6
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:15 -08:00
Matt Darfeuille
8c7e6fddfd Use a common uninstaller for Sw and Sw6
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:11 -08:00
Matt Darfeuille
e6ed4d425d core: Uninstall manpages
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:06 -08:00
Matt Darfeuille
783e438b4a Be more verbose while uninstalling Shorewall
- Remove version file as a file and not as a directory.

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:56:00 -08:00
Matt Darfeuille
27a620347a shorewall: Fail if Shorewall-core is not installed
Shorewall-core's version file resides in ${SHAREDIR}/shorewall.

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:55:56 -08:00
Matt Darfeuille
a496edef54 Use a function to fail on fatal error
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:55:50 -08:00
Matt Darfeuille
50a9b4cc6a core: Fail without a rc file and correct error msg
Abort Shorewall-core's installer execution if no Rc file is detected.

 - Correct the error message

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:55:46 -08:00
Matt Darfeuille
22b044f350 shorewall: Use a function to install file
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:55:41 -08:00
Matt Darfeuille
c58efe7698 Unify the uninstallers
- Clean up code
 - Use the .service suffix

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:55:36 -08:00
Matt Darfeuille
f48b2e715f Unify the installers
- Clean up code

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:55:31 -08:00
Matt Darfeuille
f6f7e691d0 Fail if the rc file can not be loaded
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:54:40 -08:00
Matt Darfeuille
a9048b63f2 Correct typos
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:54:36 -08:00
Matt Darfeuille
bc1df90829 Group comment lines with corresponding command
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:54:33 -08:00
Matt Darfeuille
09462cf92b Use 4 octal digits as numeric mode in installers
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:54:29 -08:00
Matt Darfeuille
315d4c39b8 Create and set directory mode using a function
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:54:04 -08:00
Matt Darfeuille
42554f8f31 Add cant_autostart() to the installers's library
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:53:59 -08:00
Matt Darfeuille
f0debcb6fb Copy only required libraries to run Shorewall
Copy only libraries that are required by Shorewall to operate properly.

Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:53:54 -08:00
Matt Darfeuille
e8a9b8ddc8 lite: Change into the uninstaller's script dir
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:53:48 -08:00
Matt Darfeuille
20cc56f2f1 Load uninstallers's common functions
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 17:53:39 -08:00
Matt Darfeuille
4e771083c7 Load installers's common functions
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 16:42:38 -08:00
Matt Darfeuille
a3fc110dc9 Add the library file for the uninstallers
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 16:41:55 -08:00
Matt Darfeuille
813f592b46 Add the library file for the installers
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 16:41:25 -08:00
Matt Darfeuille
a6eebc8ecf Replace product names by product vars
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-22 16:40:41 -08:00
Tom Eastep
6966270822 Allow 'show action' on buitin actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-19 13:43:23 -08:00
Tom Eastep
118e4f73c9 Correct validation of LOG_LEVEL
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-19 10:25:44 -08:00
Tom Eastep
10b39f3855 Correct typo (allowMast -> allowMcast)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-19 10:25:27 -08:00
Tom Eastep
c4f21ffefb Additional documentation changes.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-15 13:11:52 -08:00
Tom Eastep
a71b61c238 Delete the deprecated macros and actions during install
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-15 10:16:53 -08:00
Tom Eastep
944888c04f Handle broadcast and muticast separately
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-15 10:16:20 -08:00
Tom Eastep
48d301b2cf Rename the policy LIMIT column to RATE
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-12 10:17:43 -08:00
Tom Eastep
735919d8d3 Add LOG_LEVEL option
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-12 09:52:55 -08:00
Tom Eastep
b4561e97c8 Deprecate Drop and Reject in actions.std
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-12 09:28:38 -08:00
Tom Eastep
66a63a4da5 Fix instances of $LOGrmation
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-12 08:33:56 -08:00
Tom Eastep
8c9fb501fd Adjust .conf files
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-11 13:41:28 -08:00
Tom Eastep
977fa81d46 Make 'none' case-insensitive in policy action specifications
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-10 11:43:51 -08:00
Tom Eastep
09fda9eb6c Manpage updates:
- interfaces: Clarify the 'bridge' option
- rtrules:    Warn about similar rules with same priority
2017-02-10 11:43:04 -08:00
Tom Eastep
7e984af094 Some cleanup of policy actions
- Allow '+' in policy file action list

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-07 13:19:53 -08:00
Tom Eastep
af8d4e32c2 Replace 'info' with '$LOG' in the sample policy files
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-07 08:27:19 -08:00
Tom Eastep
ca33a7ef65 Fix Sample .conf files.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 18:28:05 -08:00
Tom Eastep
e91f414223 Document policy action changes
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 17:09:23 -08:00
Tom Eastep
5cd2f26b51 Correct shorewall.conf(5)
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 14:46:10 -08:00
Tom Eastep
dab9e1d7c4 Assume no default actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 14:45:43 -08:00
Tom Eastep
b9471a2499 Correct parsing of the POLICY column
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 14:15:24 -08:00
Tom Eastep
3b82721956 Update Shorewall6 default-action defaults
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 13:56:45 -08:00
Tom Eastep
95ffada759 Change sample IPv4 default actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 13:47:02 -08:00
Tom Eastep
b2553fb008 Another change to allow builtin actions as default actions.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 13:25:10 -08:00
Tom Eastep
8bc70674f3 Make DropDNSrep an inline action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 11:21:56 -08:00
Tom Eastep
cecb8a1950 Deprecate the Drop and Reject actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 10:52:31 -08:00
Tom Eastep
079d862bb3 Document default-action lists
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 10:51:57 -08:00
Tom Eastep
d50fdea2a7 Merge branch '5.1.1' 2017-02-06 10:26:55 -08:00
Tom Eastep
4c97c58981 Apply Tuomo's fix for CLI run with no command
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 10:25:20 -08:00
Tom Eastep
92133e5a6b Default-action lists
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-06 10:11:48 -08:00
Tom Eastep
686ca9d3a3 Allow builtin actions in xxx_DEFAULT settings.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-02-05 15:21:57 -08:00
Tom Eastep
fa7ad6bd74 Update blacklisting article:
- ipset-based blacklisting
- BLACKLIST policy and action

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-26 13:17:46 -08:00
Tom Eastep
e45b96ca20 Update blacklisting article:
- ipset-based blacklisting
- BLACKLIST policy and action

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-26 13:17:11 -08:00
Matt Darfeuille
eac2639684 core: Correct the path being displayed for the CLI
Signed-off-by: Matt Darfeuille <matdarf@gmail.com>
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-24 16:19:08 -08:00
Tom Eastep
70a395892f Make BLACKLIST work correctly in the blrules file
- Add the 'section' action option

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 15:03:02 -08:00
Tom Eastep
d2d11df4f6 Make action.BLACKLIST behave correctly in the blrules file.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 13:35:10 -08:00
Tom Eastep
b985654600 Correct typo in heading of Reject and Drop actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 11:54:40 -08:00
Tom Eastep
62ff6d3fa5 Remove obsolete macros
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 09:26:19 -08:00
Tom Eastep
2bbb5c8c1e Add hack to distinguish between the BLACKLIST macro and action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 09:23:26 -08:00
Tom Eastep
33b4ee4d31 Don't quote variable values in ERROR/WARNING/INFO directives
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 09:00:18 -08:00
Tom Eastep
889ca756a1 Document @action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-23 08:58:42 -08:00
Tom Eastep
d111e4f186 Handle built-in actions in 'show action'
- Remove a couple of non-actions from IPv4 actions.std

Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-22 15:40:36 -08:00
Tom Eastep
634c8debda Use ?REQUIRE in several actions
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-22 14:59:37 -08:00
Tom Eastep
71dd5d016b Add ?REQUIRE compiler directive
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-22 14:48:18 -08:00
Tom Eastep
6b408869d2 Correct the synopsis in two action files.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-22 11:47:12 -08:00
Tom Eastep
edf08bf408 Cosmetic change in compiler()
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-21 19:47:50 -08:00
Tom Eastep
4a01e910ff Delete unused iptablesbug() function
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-21 14:42:24 -08:00
Tom Eastep
2a010f827b Add 'show action' command.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-19 15:58:18 -08:00
Tom Eastep
9c3a82f628 Add BLACKLIST action
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-19 14:08:15 -08:00
Tom Eastep
e6933f4c8d Add BLACKLIST policy
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-18 10:55:15 -08:00
Tom Eastep
cc3b8793e0 Make BALANCE_PROVIDERS default the setting of USE_DEFAULT_RT
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-17 15:02:16 -08:00
Tom Eastep
ac5fd195ec Correct provider/routefilter check wrt optional interfaces
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-17 09:34:13 -08:00
Tom Eastep
45b9ddf188 Add BALANCE_PROVIDERS option
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-17 08:58:09 -08:00
Tom Eastep
2d16fac9ed Revert "Implement USE_DEFAULT_RT=Exact"
This reverts commit 2ca1ae734a.
2017-01-17 08:25:33 -08:00
Tom Eastep
f23970b4f7 Include LOG_MARTIANS in test for setting log_martians with routefilter
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-14 13:03:24 -08:00
Tom Eastep
04112647d3 Correct provider/routefilter checking
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-14 12:40:39 -08:00
Tom Eastep
2ca1ae734a Implement USE_DEFAULT_RT=Exact
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-14 08:14:08 -08:00
Tom Eastep
b36b07b567 Correct 'show macros'
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-12 08:35:03 -08:00
Tom Eastep
64c249a174 Set logmartians along with routefilter.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-11 15:53:55 -08:00
Tom Eastep
0019ca53e5 Include ROUTE_FILTER in routefilter/provider checks
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-11 15:39:13 -08:00
Tom Eastep
0d2a5089a9 Merge branch '5.1.0' 2017-01-11 12:29:57 -08:00
Tom Eastep
50d09e76cb Catch 'routefilter' with provider interfaces.
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-11 11:47:10 -08:00
Tom Eastep
a15b2918a4 Remove ipsec-tools/Racoon config info from the IPSEC-2.6 Article
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2017-01-08 13:32:34 -08:00
230 changed files with 6755 additions and 20795 deletions

View File

@@ -190,7 +190,7 @@ for p in ${!params[@]}; do
done
echo '#' > shorewallrc
echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
echo "# rc file: $rcfile" >> shorewallrc
echo '#' >> shorewallrc

View File

@@ -173,7 +173,12 @@ my $outfile;
open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
if ( $ENV{SOURCE_DATE_EPOCH} ) {
printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
} else {
printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
}
print $outfile "# rc file: $rcfilename\n#\n";
print $outfile "# Input: @ARGV\n#\n" if @ARGV;

View File

@@ -22,64 +22,20 @@
# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
VERSION=xxx #The Build script inserts the actual version
VERSION=xxx # The Build script inserts the actual version
PRODUCT=shorewall-core
Product="Shorewall Core"
usage() # $1 = exit status
{
ME=$(basename $0)
echo "usage: $ME [ <configuration-file> ] "
echo " $ME -v"
echo " $ME -h"
echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
echo "where <option> is one of"
echo " -h"
echo " -v"
exit $1
}
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
qt()
{
"$@" >/dev/null 2>&1
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
echo $dir/$1
return 0
fi
done
return 2
}
cant_autostart()
{
echo
echo "WARNING: Unable to configure shorewall to start automatically at boot" >&2
}
delete_file() # $1 = file to delete
{
rm -f $1
}
install_file() # $1 = source $2 = target $3 = mode
{
if cp -f $1 $2; then
@@ -98,16 +54,16 @@ install_file() # $1 = source $2 = target $3 = mode
exit 1
}
require()
{
eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
}
#
# Change to the directory containing this script
#
cd "$(dirname $0)"
#
# Source common functions
#
. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
#
# Parse the run line
#
@@ -126,7 +82,7 @@ while [ $finished -eq 0 ]; do
usage 0
;;
v)
echo "Shorewall Firewall Installer Version $VERSION"
echo "$Product Firewall Installer Version $VERSION"
exit 0
;;
*)
@@ -148,14 +104,14 @@ done
#
if [ $# -eq 0 ]; then
if [ -f ./shorewallrc ]; then
. ./shorewallrc
file=./shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
elif [ -f ~/.shorewallrc ]; then
. ~/.shorewallrc || exit 1
file=~/.shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
elif [ -f /usr/share/shorewall/shorewallrc ]; then
. /usr/share/shorewall/shorewallrc
file=/usr/share/shorewall/shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
else
fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
fi
@@ -169,7 +125,7 @@ elif [ $# -eq 1 ]; then
;;
esac
. $file
. $file || fatal_error "Can not load the RC file: $file"
else
usage 1
fi
@@ -285,13 +241,12 @@ case "$HOST" in
debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
;;
*)
echo "ERROR: Unknown HOST \"$HOST\"" >&2
exit 1;
fatal_error "Unknown HOST \"$HOST\""
;;
esac
if [ -z "$file" ]; then
if $HOST = linux; then
if [ $HOST = linux ]; then
file=shorewallrc.default
else
file=shorewallrc.${HOST}
@@ -304,7 +259,8 @@ if [ -z "$file" ]; then
echo "" >&2
echo "Example:" >&2
echo "" >&2
echo " ./install.sh $file" &>2
echo " ./install.sh $file" >&2
exit 1
fi
if [ -n "$DESTDIR" ]; then
@@ -315,45 +271,31 @@ if [ -n "$DESTDIR" ]; then
fi
fi
echo "Installing Shorewall Core Version $VERSION"
echo "Installing $Product Version $VERSION"
#
# Create directories
#
mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall
chmod 755 ${DESTDIR}${LIBEXECDIR}/shorewall
make_parent_directory ${DESTDIR}${LIBEXECDIR}/shorewall 0755
mkdir -p ${DESTDIR}${SHAREDIR}/shorewall
chmod 755 ${DESTDIR}${SHAREDIR}/shorewall
make_parent_directory ${DESTDIR}${SHAREDIR}/shorewall 0755
mkdir -p ${DESTDIR}${CONFDIR}
chmod 755 ${DESTDIR}${CONFDIR}
make_parent_directory ${DESTDIR}${CONFDIR} 0755
if [ -n "${SYSCONFDIR}" ]; then
mkdir -p ${DESTDIR}${SYSCONFDIR}
chmod 755 ${DESTDIR}${SYSCONFDIR}
fi
[ -n "${SYSCONFDIR}" ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
if [ -z "${SERVICEDIR}" ]; then
SERVICEDIR="$SYSTEMD"
fi
if [ -n "${SERVICEDIR}" ]; then
mkdir -p ${DESTDIR}${SERVICEDIR}
chmod 755 ${DESTDIR}${SERVICEDIR}
fi
[ -n "${SERVICEDIR}" ] && make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
mkdir -p ${DESTDIR}${SBINDIR}
chmod 755 ${DESTDIR}${SBINDIR}
make_parent_directory ${DESTDIR}${SBINDIR} 0755
if [ -n "${MANDIR}" ]; then
mkdir -p ${DESTDIR}${MANDIR}
chmod 755 ${DESTDIR}${MANDIR}
fi
[ -n "${MANDIR}" ] && make_parent_directory ${DESTDIR}${MANDIR} 0755
if [ -n "${INITFILE}" ]; then
mkdir -p ${DESTDIR}${INITDIR}
chmod 755 ${DESTDIR}${INITDIR}
make_parent_directory ${DESTDIR}${INITDIR} 0755
if [ -n "$AUXINITSOURCE" -a -f "$AUXINITSOURCE" ]; then
install_file $AUXINITSOURCE ${DESTDIR}${INITDIR}/$AUXINITFILE 0544
@@ -369,7 +311,7 @@ fi
#
install_file shorewall ${DESTDIR}${SBINDIR}/shorewall 0755
[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall
echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/shorewall"
#
# Install wait4ifup
#
@@ -382,8 +324,14 @@ echo "wait4ifup installed in ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup"
# Install the libraries
#
for f in lib.* ; do
install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
case $f in
*installer)
;;
*)
install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
;;
esac
done
if [ $SHAREDIR != /usr/share ]; then
@@ -398,11 +346,11 @@ fi
if [ -n "$MANDIR" ]; then
cd manpages
[ -n "$INSTALLD" ] || mkdir -p ${DESTDIR}${MANDIR}/man8/
[ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
for f in *.8; do
gzip -9c $f > $f.gz
install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
done
@@ -419,7 +367,7 @@ ln -sf lib.base ${DESTDIR}${SHAREDIR}/shorewall/functions
# Create the version file
#
echo "$VERSION" > ${DESTDIR}${SHAREDIR}/shorewall/coreversion
chmod 644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
if [ -z "${DESTDIR}" ]; then
if [ $update -ne 0 ]; then
@@ -444,14 +392,20 @@ fi
if [ ${SHAREDIR} != /usr/share ]; then
for f in lib.*; do
if [ $BUILD != apple ]; then
eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
else
eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
fi
case $f in
*installer)
;;
*)
if [ $BUILD != apple ]; then
eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
else
eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
fi
;;
esac
done
fi
#
# Report Success
# Report Success
#
echo "Shorewall Core Version $VERSION Installed"
echo "$Product Version $VERSION Installed"

View File

@@ -1,7 +1,7 @@
#
# Shorewall 5.0 -- /usr/share/shorewall/lib.base
# Shorewall 5.1 -- /usr/share/shorewall/lib.base
#
# (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
# (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#

View File

@@ -25,7 +25,7 @@
# loaded after this one and replaces some of the functions declared here.
#
SHOREWALL_CAPVERSION=50100
SHOREWALL_CAPVERSION=50106
if [ -z "$g_basedir" ]; then
#
@@ -78,29 +78,6 @@ showchain() # $1 = name of chain
fi
}
#
# The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules).
#
iptablesbug()
{
if [ $g_family -eq 4 ]; then
if qt mywhich awk ; then
awk 'BEGIN { sline=""; };\
/^-[jg]/ { print sline $0; next };\
/-m policy.*-[jg] / { print $0; next };\
/-m policy/ { sline=$0; next };\
/--mask ff/ { sub( /--mask ff/, "--mask 0xff" ) };\
{ print ; sline="" }'
else
echo " WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
cat
fi
else
cat
fi
}
#
# Validate the value of RESTOREFILE
#
@@ -1150,21 +1127,41 @@ show_macros() {
done
}
show_an_action() {
echo "Shorewall $SHOREWALL_VERSION Action $1 at $g_hostname - $(date)"
cat ${directory}/action.$1
}
show_a_macro() {
echo "Shorewall $SHOREWALL_VERSION Macro $1 at $g_hostname - $(date)"
cat ${directory}/macro.$1
}
#
# Don't dump empty SPD entries
# Don't dump empty SPD entries or entries from the other address family
#
spd_filter()
{
awk \
'BEGIN { skip=0; }; \
/^src/ { skip=0; }; \
/^src 0.0.0.0\/0/ { skip=1; }; \
/^src ::\/0/ { skip=1; }; \
{ if ( skip == 0 ) print; };'
spd_filter() {
#
# af = Address Family (4 or 6)
# afok = Address Family of entry matches af
# p = print the contents of A (entry is not empty)
# i = Number of lines stored in A
#
awk -v af=$g_family \
'function prnt(A,i, j) { while ( j < i ) print A[j++]; };\
\
/^src / { if (p) prnt( A, i );\
afok = 1;\
p = 0;\
i = 0;\
if ( af == 4 )\
{ if ( /:/ ) afok = 0; }\
else\
{ if ( /\./ ) afok = 0; }\
};\
{ if ( afok ) A[i++] = $0; };\
/tmpl/ { p = afok; };\
\
END { if (p) prnt( A, i ); }'
}
#
# Print a heading with leading and trailing black lines
@@ -1177,7 +1174,8 @@ heading() {
show_ipsec() {
heading "PFKEY SPD"
$IP -s xfrm policy | spd_filter
$IP -s -$g_family xfrm policy | spd_filter
heading "PFKEY SAD"
$IP -s -$g_family xfrm state | egrep -v '[[:space:]]+(auth-trunc|enc )' # Don't divulge the keys
}
@@ -1207,10 +1205,10 @@ show_command() {
if [ -n "$foo" ]; then
macro=${macro#*.}
foo=${foo%.*}
if [ ${#macro} -gt 10 ]; then
echo " $macro ${foo#\#}"
if [ ${#macro} -gt 5 ]; then
printf " $macro\t${foo#\#}\n"
else
$g_echo_e " $macro \t${foo#\#}"
printf " $macro\t\t${foo#\#}\n"
fi
fi
}
@@ -1458,12 +1456,27 @@ show_command() {
;;
*)
case $1 in
action)
[ $# -lt 2 ] && fatal_error 'Missing <action>'
[ $# -gt 2 ] && too_many_arguments $2
for directory in $(split $CONFIG_PATH); do
if [ -f ${directory}/action.$2 ]; then
eval show_an_action $2 $g_pager
return
fi
done
echo " WARNING: Action $2 not found" >&2
return
;;
actions)
[ $# -gt 1 ] && too_many_arguments $2
eval show_actions_sorted $g_pager
return
;;
macro)
[ $# -lt 2 ] && fatal_error 'Missing <macro>'
[ $# -ne 2 ] && too_many_arguments $2
for directory in $(split $CONFIG_PATH); do
if [ -f ${directory}/macro.$2 ]; then
@@ -2773,7 +2786,7 @@ determine_capabilities() {
GOTO_TARGET=
LOGMARK_TARGET=
IPMARK_TARGET=
LOG_TARGET=Yes
LOG_TARGET=
ULOG_TARGET=
NFLOG_TARGET=
PERSISTENT_SNAT=
@@ -2806,6 +2819,8 @@ determine_capabilities() {
WAIT_OPTION=
CPU_FANOUT=
NETMAP_TARGET=
NFLOG_SIZE=
RESTORE_WAIT_OPTION=
AMANDA_HELPER=
FTP_HELPER=
@@ -2829,9 +2844,11 @@ determine_capabilities() {
qt $arptables -L OUT && ARPTABLESJF=Yes
fi
[ -z "$(${g_tool}-restore --wait < /dev/null 2>&1)" ] && RESTORE_WAIT_OPTION=Yes
if qt $g_tool --wait -t filter -L INPUT -n -v; then
WAIT_OPTION=Yes
tool="$tool --wait"
g_tool="$g_tool --wait"
fi
chain=fooX$$
@@ -3137,12 +3154,15 @@ determine_capabilities() {
qt $g_tool -A $chain -m time --timestart 23:00 -j DROP && TIME_MATCH=Yes
qt $g_tool -A $chain -g $chain1 && GOTO_TARGET=Yes
qt $g_tool -A $chain -j LOGMARK && LOGMARK_TARGET=Yes
qt $g_tool -A $chain -j LOG || LOG_TARGET=
qt $g_tool -A $chain -j LOG && LOG_TARGET=Yes
qt $g_tool -A $chain -j ULOG && ULOG_TARGET=Yes
qt $g_tool -A $chain -j NFLOG && NFLOG_TARGET=Yes
qt $g_tool -A $chain -j MARK --set-mark 5 && MARK_ANYWHERE=Yes
qt $g_tool -A $chain -m statistic --mode nth --every 2 --packet 1 && STATISTIC_MATCH=Yes
qt $g_tool -A $chain -m geoip --src-cc US && GEOIP_MATCH=Yes
if qt $g_tool -A $chain -j NFLOG; then
NFLOG_TARGET=Yes
qt $g_tool -A $chain -j NFLOG --nflog-size 64 && NFLOG_SIZE=Yes
fi
if [ $g_family -eq 4 ]; then
qt $g_tool -A $chain -j ACCOUNT --addr 192.168.1.0/29 --tname $chain && ACCOUNT_TARGET=Yes
@@ -3298,9 +3318,11 @@ report_capabilities_unsorted() {
if [ $g_family -eq 4 ]; then
report_capability "iptables -S (IPTABLES_S)" $IPTABLES_S
report_capability "iptables --wait option (WAIT_OPTION)" $WAIT_OPTION
report_capability "iptables-restore --wait option (RESTORE_WAIT_OPTION)" $RESTORE_WAIT_OPTION
else
report_capability "ip6tables -S (IPTABLES_S)" $IPTABLES_S
report_capability "ip6tables --wait option (WAIT_OPTION)" $WAIT_OPTION
report_capability "ip6tables-restore --wait option (RESTORE_WAIT_OPTION)" $RESTORE_WAIT_OPTION
fi
report_capability "Basic Filter (BASIC_FILTER)" $BASIC_FILTER
@@ -3308,6 +3330,7 @@ report_capabilities_unsorted() {
report_capability "CT Target (CT_TARGET)" $CT_TARGET
report_capability "NFQUEUE CPU Fanout (CPU_FANOUT)" $CPU_FANOUT
report_capability "NETMAP Target (NETMAP_TARGET)" $NETMAP_TARGET
report_capability "--nflog-size support (NFLOG_SIZE)" $NFLOG_SIZE
echo " Kernel Version (KERNELVERSION): $KERNELVERSION"
echo " Capabilities Version (CAPVERSION): $CAPVERSION"
@@ -3414,6 +3437,8 @@ report_capabilities_unsorted1() {
report_capability1 WAIT_OPTION
report_capability1 CPU_FANOUT
report_capability1 NETMAP_TARGET
report_capability1 NFLOG_SIZE
report_capability1 RESTORE_WAIT_OPTION
report_capability1 AMANDA_HELPER
report_capability1 FTP_HELPER
@@ -3718,7 +3743,7 @@ ipcalc_command() {
valid_address $address || fatal_error "Invalid IP address: $address"
[ -z "$vlsm" ] && fatal_error "Missing VLSM"
[ "x$address" = "x$vlsm" ] && "Invalid VLSM"
[ "x$address" = "x$vlsm" ] && fatal_error "Invalid VLSM"
[ $vlsm -gt 32 ] && fatal_error "Invalid VLSM: /$vlsm"
address=$address/$vlsm
@@ -4267,12 +4292,17 @@ usage() # $1 = exit status
echo " reenable <interface>"
ecko " refresh [ -d ] [ -n ] [ -T ] [ -D <directory> ] [ <chain>... ]"
echo " reject <address> ..."
ecko " reload [ -s ] [ -c ] [ -r <root user> ] [ -T ] [ -i ] [ <directory> ] <system>"
if [ -n "$g_lite" ]; then
echo " reload [ -n ] [ -p ] [ -f ] [ -C ] [ <directory> ]"
else
echo " reload [ -n ] [ -p ] [-d] [ -f ] [ -c ] [ -T ] [ -i ] [ -C ] [ <directory> ]"
fi
if [ -z "$g_lite" ]; then
echo " remote-reload [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
echo " remote-restart [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
echo " remote-start [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
echo " remote-reload [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
echo " remote-restart [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
echo " remote-start [ -n ] [ -s ] [ -c ] [ -r <root-name> ] [ -T ] [ -i ] [ <directory> ] <system>"
fi
echo " reset [ <chain> ... ]"
@@ -4291,6 +4321,7 @@ usage() # $1 = exit status
echo " savesets"
echo " [ show | list | ls ] [ -b ] [ -x ] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]"
ecko " [ show | list | ls ] actions"
ecko " [ show | list | ls ] action <action>"
echo " [ show | list | ls ] arptables"
echo " [ show | list | ls ] [ -f ] capabilities"
echo " [ show | list | ls ] [ -x ] {bl|blacklists}"
@@ -4393,7 +4424,10 @@ shorewall_cli() {
finished=0
while [ $finished -eq 0 ]; do
[ $# -eq 0 ] && usage 1
if [ $# -eq 0 ]; then
setup_product_environment 1
usage 1
fi
option=$1
case $option in
-)
@@ -4523,10 +4557,6 @@ shorewall_cli() {
esac
done
if [ $# -eq 0 ]; then
usage 1
fi
setup_product_environment 1
[ -n "$g_lite" ] || . ${SHAREDIR}/shorewall/lib.cli-std

View File

@@ -1,7 +1,7 @@
#
# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
# Shorewall 5.1 -- /usr/share/shorewall/lib.common.
#
# (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
# (c) 2010-2017 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
@@ -269,53 +269,48 @@ loadmodule() # $1 = module name, $2 - * arguments
{
local modulename
modulename=$1
shift
local moduleoptions
moduleoptions=$*
local modulefile
local suffix
if [ -d /sys/module/ ]; then
if ! list_search $modulename $DONT_LOAD; then
if [ ! -d /sys/module/$modulename ]; then
shift
for suffix in $MODULE_SUFFIX ; do
for directory in $moduledirectories; do
modulefile=$directory/${modulename}.${suffix}
if [ -f $modulefile ]; then
case $moduleloader in
insmod)
insmod $modulefile $*
;;
*)
modprobe $modulename $*
;;
esac
break 2
fi
done
done
case $moduleloader in
insmod)
for directory in $moduledirectories; do
for modulefile in $directory/${modulename}.*; do
if [ -f $modulefile ]; then
insmod $modulefile $moduleoptions
return
fi
done
done
;;
*)
modprobe -q $modulename $moduleoptions
;;
esac
fi
fi
elif ! list_search $modulename $DONT_LOAD $MODULES; then
shift
for suffix in $MODULE_SUFFIX ; do
for directory in $moduledirectories; do
modulefile=$directory/${modulename}.${suffix}
if [ -f $modulefile ]; then
case $moduleloader in
insmod)
insmod $modulefile $*
;;
*)
modprobe $modulename $*
;;
esac
break 2
fi
done
done
case $moduleloader in
insmod)
for directory in $moduledirectories; do
for modulefile in $directory/${modulename}.*; do
if [ -f $modulefile ]; then
insmod $modulefile $moduleoptions
return
fi
done
done
;;
*)
modprobe -q $modulename $moduleoptions
;;
esac
fi
}
@@ -338,8 +333,6 @@ reload_kernel_modules() {
moduleloader=insmod
fi
[ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
if [ -n "$MODULESDIR" ]; then
case "$MODULESDIR" in
+*)
@@ -394,8 +387,6 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
moduleloader=insmod
fi
[ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
if [ -n "$MODULESDIR" ]; then
case "$MODULESDIR" in
+*)

View File

@@ -1,7 +1,7 @@
#
# Shorewall 5.0 -- /usr/share/shorewall/lib.core
# Shorewall 5.1 -- /usr/share/shorewall/lib.core
#
# (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
# (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
@@ -24,7 +24,7 @@
# generated scripts.
#
SHOREWALL_LIBVERSION=50100
SHOREWALL_LIBVERSION=50108
#
# Fatal Error

View File

@@ -0,0 +1,89 @@
#
#
# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
#
# (c) 2017 - Tom Eastep (teastep@shorewall.net)
# (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
#
# Complete documentation is available at http://shorewall.net
#
# This program is part of Shorewall.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by the
# Free Software Foundation, either version 2 of the license or, at your
# option, any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# The purpose of this library is to hold those functions used by the products installer.
#
#########################################################################################
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
qt()
{
"$@" >/dev/null 2>&1
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
return 0
fi
done
return 2
}
delete_file() # $1 = file to delete
{
rm -f $1
}
require()
{
eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
}
make_directory() # $1 = directory , $2 = mode
{
mkdir $1
chmod $2 $1
[ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
}
make_parent_directory() # $1 = directory , $2 = mode
{
mkdir -p $1
chmod $2 $1
[ -n "$OWNERSHIP" ] && chown $OWNER:$GROUP $1
}
cant_autostart()
{
echo
echo "WARNING: Unable to configure $Product to start automatically at boot" >&2
}

View File

@@ -0,0 +1,106 @@
#
#
# Shorewall 5.1 -- /usr/share/shorewall/lib.installer.
#
# (c) 2017 - Tom Eastep (teastep@shorewall.net)
# (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
#
# Complete documentation is available at http://shorewall.net
#
# This program is part of Shorewall.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by the
# Free Software Foundation, either version 2 of the license or, at your
# option, any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# The purpose of this library is to hold those functions used by the products uninstaller.
#
#########################################################################################
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
qt()
{
"$@" >/dev/null 2>&1
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
return 0
fi
done
return 2
}
remove_file() # $1 = file to remove
{
if [ -n "$1" ] ; then
if [ -f $1 -o -L $1 ] ; then
rm -f $1
echo "$1 Removed"
fi
fi
}
remove_directory() # $1 = directory to remove
{
if [ -n "$1" ] ; then
if [ -d $1 ] ; then
rm -rf $1
echo "$1 Removed"
fi
fi
}
remove_file_with_wildcard() # $1 = file with wildcard to remove
{
if [ -n "$1" ] ; then
for f in $1; do
if [ -d $f ] ; then
rm -rf $f
echo "$f Removed"
elif [ -f $f -o -L $f ] ; then
rm -f $f
echo "$f Removed"
fi
done
fi
}
restore_file() # $1 = file to restore
{
if [ -f ${1}-shorewall.bkout ]; then
if (mv -f ${1}-shorewall.bkout $1); then
echo
echo "$1 restored"
else
exit 1
fi
fi
}

View File

@@ -432,6 +432,33 @@
<arg choice="plain"><replaceable>address</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall[6][-lite]</command>
<arg
choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
<arg>options</arg>
<arg choice="plain"><option>reload</option></arg>
<arg><option>-n</option></arg>
<arg><option>-p</option><arg><option>-d</option></arg></arg>
<arg><option>-f</option></arg>
<arg><option>-c</option></arg>
<arg><option>-T</option></arg>
<arg><option>-i</option></arg>
<arg><option>-C</option></arg>
<arg><replaceable>directory</replaceable></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall[6]</command>
@@ -685,6 +712,31 @@
<arg choice="plain"><option>capabilities</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall[6]</command>
<arg>options</arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg><option>-f</option></arg>
<arg choice="plain"><option>{actions|macros}</option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall[6]</command>
<arg choice="opt"><option>trace</option>|<option>debug</option></arg>
<arg>options</arg>
<arg choice="req"><option>show | list | ls </option></arg>
<arg choice="plain"><option>action</option><arg
choice="plain"><replaceable>action</replaceable></arg></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>shorewall[6][-lite]</command>
@@ -695,7 +747,7 @@
<arg choice="req"><option>show | list | ls </option></arg>
<arg
choice="req"><option>actions|classifiers|connections|config|events|filters|ip|ipa|ipsec|macros|zones|policies|marks</option></arg>
choice="req"><option>classifiers|connections|config|events|filters|ip|ipa|ipsec|zones|policies|marks</option></arg>
</cmdsynopsis>
<cmdsynopsis>
@@ -1891,10 +1943,11 @@
<varlistentry>
<term><emphasis role="bold">remote-start</emphasis>
[-<option>s</option>] [-<option>c</option>] [-<option>r</option>
<replaceable>root-user-name</replaceable>] [-<option>T</option>]
[-<option>i</option>] [ [ -D ] <replaceable>directory</replaceable> ]
[ <replaceable>system</replaceable> ]</term>
[-<option>n</option>] [-<option>s</option>] [-<option>c</option>]
[-<option>r</option> <replaceable>root-user-name</replaceable>]
[-<option>T</option>] [-<option>i</option>] [ [ -D ]
<replaceable>directory</replaceable> ] [
<replaceable>system</replaceable> ]</term>
<listitem>
<para>This command was renamed from <command>load</command> in
@@ -1930,6 +1983,9 @@
<replaceable>directory</replaceable>, then the <option>-D</option>
option must be given.</para>
<para>The <option>-n</option> option causes Shorewall to avoid
updating the routing table(s).</para>
<para>If <emphasis role="bold">-s</emphasis> is specified and the
<emphasis role="bold">start</emphasis> command succeeds, then the
remote Shorewall-lite configuration is saved by executing <emphasis
@@ -2415,12 +2471,23 @@
arguments:</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">action
<replaceable>action</replaceable></emphasis></term>
<listitem>
<para>Lists the named action file. Available on Shorewall and
Shorewall6 only.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">actions</emphasis></term>
<listitem>
<para>Produces a report about the available actions (built-in,
standard and user-defined).</para>
standard and user-defined). Available on Shorewall and
Shorewall6 only.</para>
</listitem>
</varlistentry>
@@ -3106,6 +3173,8 @@
<title>FILES</title>
<para>/etc/shorewall/</para>
<para>/etc/shorewall6/</para>
</refsect1>
<refsect1>
@@ -3115,13 +3184,17 @@
url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
<para>shorewall-accounting(5), shorewall-actions(5),
shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-arprules(5), shorewall-blrules(5), shorewall.conf(5),
shorewall-conntrack(5), shorewall-ecn(5), shorewall-exclusion(5),
shorewall-hosts(5), shorewall-init(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-mangle(5),
shorewall-masq(5), shorewall-modules(5), shorewall-nat(5),
shorewall-nesting(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
shorewall-tunnels(5), shorewall-zones(5)</para>
shorewall6-proxyndp(5), shorewall-routes(5), shorewall-rtrules(5),
shorewall-rtrules(5), shorewall-rules(5), shorewall-secmarks(5),
shorewall-snat(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
shorewall-tcfilters(5), shorewall-tcinterfaces(5), shorewall-tcpri(5),
shorewall-tunnels(5), shorewall-vardir(5), shorewall-zones(5)</para>
</refsect1>
</refentry>

View File

@@ -1,8 +1,8 @@
#!/bin/sh
#
# Shorewall Packet Filtering Firewall Control Program - V5.0
# Shorewall Packet Filtering Firewall Control Program - V5.1
#
# (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015 -
# (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
# Tom Eastep (teastep@shorewall.net)
#
# Shorewall documentation is available at http://www.shorewall.net
@@ -25,6 +25,10 @@
# For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
#
################################################################################################
#
# Default product is Shorewall. PRODUCT will be set based on $0 and on passed -[46] and -l
# options
#
PRODUCT=shorewall
#

View File

@@ -1,5 +1,5 @@
#
# Debian Shorewall 4.5 rc file
# Debian Shorewall 5.0 rc file
#
BUILD= #Default is to detect the build system
HOST=debian
@@ -14,7 +14,7 @@ INITDIR= #Directory where SysV init scripts are installed.
INITFILE= #Name of the product's installed SysV init script
INITSOURCE=init.debian.sh #Name of the distributed file to be installed as the SysV init script
ANNOTATED= #If non-zero, annotated configuration files are installed
SYSCONFFILE=default.debian #Name of the distributed file to be installed in $SYSCONFDIR
SYSCONFFILE=default.debian.systemd #Name of the distributed file to be installed in $SYSCONFDIR
SERVICEFILE=$PRODUCT.service.debian #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
SYSCONFDIR=/etc/default #Directory where SysV init parameter files are installed
SERVICEDIR=/lib/systemd/system #Directory where .service files are installed (systems running systemd only)

View File

@@ -1,5 +1,5 @@
#
# Debian Shorewall 4.5 rc file
# Debian Shorewall 5.0 rc file
#
BUILD= #Default is to detect the build system
HOST=debian
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d #Directory where SysV init scripts are i
INITFILE=$PRODUCT #Name of the product's installed SysV init script
INITSOURCE=init.debian.sh #Name of the distributed file to be installed as the SysV init script
ANNOTATED= #If non-zero, annotated configuration files are installed
SYSCONFFILE=default.debian #Name of the distributed file to be installed in $SYSCONFDIR
SYSCONFFILE=default.debian.sysvinit #Name of the distributed file to be installed in $SYSCONFDIR
SERVICEFILE= #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
SYSCONFDIR=/etc/default #Directory where SysV init parameter files are installed
SERVICEDIR= #Directory where .service files are installed (systems running systemd only)

View File

@@ -1,8 +1,8 @@
#
# Default Shorewall 5.0 rc file
#
HOST=linux #Generic Linux
BUILD= #Default is to detect the build system
HOST=linux #Generic Linux
PREFIX=/usr #Top-level directory for shared files, libraries, etc.
SHAREDIR=${PREFIX}/share #Directory for arch-neutral files.
LIBEXECDIR=${PREFIX}/share #Directory for executable scripts.

View File

@@ -1,8 +1,8 @@
#
# Created by Shorewall Core version 5.0.2-RC1 configure - Fri, Nov 06, 2015 10:02:03 AM
#
# Input: host=openwrt
# OpenWRT Shorewall 5.0 rc file
#
BUILD= #Default is to detect the build system
HOST=openwrt
PREFIX=/usr #Top-level directory for shared files, libraries, etc.
SHAREDIR=${PREFIX}/share #Directory for arch-neutral files.
LIBEXECDIR=${PREFIX}/share #Directory for executable scripts.

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Script to back uninstall Shoreline Firewall
# Script to back uninstall Shoreline Firewall Core Modules
#
# (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
#
@@ -26,63 +26,75 @@
# You may only use this script to uninstall the version
# shown below. Simply run this script to remove Shorewall Firewall
VERSION=xxx #The Build script inserts the actual version
PRODUCT="shorewall-core"
VERSION=xxx # The Build script inserts the actual version
PRODUCT=shorewall-core
Product="Shorewall Core"
usage() # $1 = exit status
{
ME=$(basename $0)
echo "usage: $ME [ <shorewallrc file> ]"
echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
echo "where <option> is one of"
echo " -h"
echo " -v"
exit $1
}
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
qt()
{
"$@" >/dev/null 2>&1
}
restore_file() # $1 = file to restore
{
if [ -f ${1}-shorewall.bkout ]; then
if (mv -f ${1}-shorewall.bkout $1); then
echo
echo "$1 restored"
else
exit 1
fi
fi
}
remove_file() # $1 = file to restore
{
if [ -f $1 -o -L $1 ] ; then
rm -f $1
echo "$1 Removed"
fi
}
#
# Change to the directory containing this script
#
cd "$(dirname $0)"
#
# Source common functions
#
. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
#
# Parse the run line
#
finished=0
while [ $finished -eq 0 ]; do
option=$1
case "$option" in
-*)
option=${option#-}
while [ -n "$option" ]; do
case $option in
h)
usage 0
;;
v)
echo "$Product Firewall Uninstaller Version $VERSION"
exit 0
;;
*)
usage 1
;;
esac
done
shift
;;
*)
finished=1
;;
esac
done
#
# Read the RC file
#
if [ $# -eq 0 ]; then
if [ -f ./shorewallrc ]; then
. ./shorewallrc
. ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
elif [ -f ~/.shorewallrc ]; then
. ~/.shorewallrc || exit 1
. ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
elif [ -f /usr/share/shorewall/shorewallrc ]; then
. /usr/share/shorewall/shorewallrc
. /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
else
fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
fi
@@ -92,11 +104,11 @@ elif [ $# -eq 1 ]; then
/*|.*)
;;
*)
file=./$file
file=./$file || exit 1
;;
esac
. $file
. $file || fatal_error "Can not load the RC file: $file"
else
usage 1
fi
@@ -104,20 +116,26 @@ fi
if [ -f ${SHAREDIR}/shorewall/coreversion ]; then
INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall/coreversion)"
if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
echo "WARNING: Shorewall Core Version $INSTALLED_VERSION is installed"
echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
echo " and this is the $VERSION uninstaller."
VERSION="$INSTALLED_VERSION"
fi
else
echo "WARNING: Shorewall Core Version $VERSION is not installed"
echo "WARNING: $Product Version $VERSION is not installed"
VERSION=""
fi
echo "Uninstalling Shorewall Core $VERSION"
echo "Uninstalling $Product $VERSION"
rm -rf ${SHAREDIR}/shorewall
rm -f ~/.shorewallrc
echo "Shorewall Core Uninstalled"
if [ -n "${MANDIR}" ]; then
remove_file_with_wildcard ${MANDIR}/man5/shorewall\*
remove_file_with_wildcard ${MANDIR}/man8/shorewall\*
fi
remove_directory ${SHAREDIR}/shorewall
remove_file ~/.shorewallrc
#
# Report Success
#
echo "$Product $VERSION Uninstalled"

View File

@@ -0,0 +1,21 @@
# List the Shorewall products that Shorewall-init is to
# initialize (space-separated list).
#
# Sample: PRODUCTS="shorewall shorewall6"
#
PRODUCTS=""
#
# Set this to 1 if you want Shorewall-init to react to
# ifup/ifdown and NetworkManager events
#
IFUPDOWN=0
#
# Where Up/Down events get logged
#
LOGFILE=/var/log/shorewall-ifupdown.log
# Startup options - set verbosity to 0 (minimal reporting)
OPTIONS="-V0"
# IOF

View File

@@ -0,0 +1,27 @@
# List the Shorewall products that Shorewall-init is to
# initialize (space-separated list).
#
# Sample: PRODUCTS="shorewall shorewall6"
#
PRODUCTS=""
#
# Set this to 1 if you want Shorewall-init to react to
# ifup/ifdown and NetworkManager events
#
IFUPDOWN=0
#
# Set this to the name of the file that is to hold
# ipset contents. Shorewall-init will load those ipsets
# during 'start' and will save them there during 'stop'.
#
SAVE_IPSETS=""
#
# Where Up/Down events get logged
#
LOGFILE=/var/log/shorewall-ifupdown.log
# Startup options - set verbosity to 0 (minimal reporting)
OPTIONS="-V0"
# IOF

View File

@@ -159,8 +159,9 @@ shorewall_stop () {
mkdir -p $(dirname "$SAVE_IPSETS")
if ipset -S > "${SAVE_IPSETS}.tmp"; then
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
else
rm -f "${SAVE_IPSETS}.tmp"
echo_notdone
fi

View File

@@ -66,6 +66,10 @@ start () {
printf "Initializing \"Shorewall-based firewalls\": "
if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
ipset -R < "$SAVE_IPSETS"
fi
for PRODUCT in $PRODUCTS; do
setstatedir
retval=$?
@@ -120,6 +124,15 @@ stop () {
done
if [ $retval -eq 0 ]; then
if [ -n "$SAVE_IPSETS" ]; then
mkdir -p $(dirname "$SAVE_IPSETS")
if ipset -S > "${SAVE_IPSETS}.tmp"; then
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
else
rm -f "${SAVE_IPSETS}.tmp"
fi
fi
rm -f $lockfile
success
else

View File

@@ -126,7 +126,9 @@ stop () {
if [ -n "$SAVE_IPSETS" ]; then
mkdir -p $(dirname "$SAVE_IPSETS")
if ipset -S > "${SAVE_IPSETS}.tmp"; then
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
else
rm -f "${SAVE_IPSETS}.tmp"
fi
fi
}

View File

@@ -116,7 +116,9 @@ shorewall_stop () {
if [ -n "$SAVE_IPSETS" ]; then
mkdir -p $(dirname "$SAVE_IPSETS")
if ipset -S > "${SAVE_IPSETS}.tmp"; then
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
else
rm -f "${SAVE_IPSETS}.tmp"
fi
fi

View File

@@ -126,7 +126,9 @@ shorewall_stop () {
if [ -n "$SAVE_IPSETS" ]; then
mkdir -p $(dirname "$SAVE_IPSETS")
if ipset -S > "${SAVE_IPSETS}.tmp"; then
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
else
rm -f "${SAVE_IPSETS}.tmp"
fi
fi
}

View File

@@ -27,58 +27,21 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
VERSION=xxx #The Build script inserts the actual version.
VERSION=xxx # The Build script inserts the actual version
PRODUCT=shorewall-init
Product="Shorewall Init"
usage() # $1 = exit status
{
ME=$(basename $0)
echo "usage: $ME [ <configuration-file> ]"
echo " $ME -v"
echo " $ME -h"
echo " $ME -n"
echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
echo "where <option> is one of"
echo " -h"
echo " -v"
echo " -n"
exit $1
}
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
qt()
{
"$@" >/dev/null 2>&1
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
return 0
fi
done
return 2
}
cant_autostart()
{
echo
echo "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
}
install_file() # $1 = source $2 = target $3 = mode
{
if cp -f $1 $2; then
@@ -97,23 +60,16 @@ install_file() # $1 = source $2 = target $3 = mode
exit 1
}
make_directory() # $1 = directory , $2 = mode
{
mkdir -p $1
chmod 0755 $1
[ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
}
require()
{
eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
}
#
# Change to the directory containing this script
#
cd "$(dirname $0)"
#
# Source common functions
#
. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
#
# Parse the run line
#
@@ -134,7 +90,7 @@ while [ $finished -eq 0 ] ; do
usage 0
;;
v)
echo "Shorewall-init Firewall Installer Version $VERSION"
echo "$Product Firewall Installer Version $VERSION"
exit 0
;;
n*)
@@ -159,17 +115,17 @@ done
# Read the RC file
#
if [ $# -eq 0 ]; then
#
# Load packager's settings if any
#
if [ -f ./shorewallrc ]; then
. ./shorewallrc || exit 1
file=./shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
elif [ -f ~/.shorewallrc ]; then
. ~/.shorewallrc || exit 1
file=~/.shorewallrc
else
fatal_error "No configuration file specified and ~/.shorewallrc not found"
. $file || fatal_error "Can not load the RC file: $file"
elif [ -f /usr/share/shorewall/shorewallrc ]; then
file=/usr/share/shorewall/shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
else
fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
fi
elif [ $# -eq 1 ]; then
file=$1
@@ -177,11 +133,11 @@ elif [ $# -eq 1 ]; then
/*|.*)
;;
*)
file=./$file
file=./$file || exit 1
;;
esac
. $file
. $file || fatal_error "Can not load the RC file: $file"
else
usage 1
fi
@@ -298,12 +254,10 @@ case "$HOST" in
echo "Installing Openwrt-specific configuration..."
;;
linux)
echo "ERROR: Shorewall-init is not supported on this system" >&2
exit 1
fatal_error "Shorewall-init is not supported on this system"
;;
*)
echo "ERROR: Unsupported HOST distribution: \"$HOST\"" >&2
exit 1;
fatal_error "Unsupported HOST distribution: \"$HOST\""
;;
esac
@@ -315,30 +269,27 @@ if [ -n "$DESTDIR" ]; then
OWNERSHIP=""
fi
make_directory ${DESTDIR}${INITDIR} 0755
make_parent_directory ${DESTDIR}${INITDIR} 0755
fi
echo "Installing Shorewall Init Version $VERSION"
echo "Installing $Product Version $VERSION"
#
# Check for /usr/share/shorewall-init/version
#
if [ -f ${DESTDIR}${SHAREDIR}/shorewall-init/version ]; then
if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
first_install=""
else
first_install="Yes"
fi
if [ -n "$DESTDIR" ]; then
mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
fi
[ -n "$DESTDIR" ] && make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
#
# Install the Firewall Script
#
if [ -n "$INITFILE" ]; then
mkdir -p ${DESTDIR}${INITDIR}
make_parent_directory ${DESTDIR}${INITDIR} 0755
install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
@@ -357,25 +308,21 @@ if [ -z "${SERVICEDIR}" ]; then
fi
if [ -n "$SERVICEDIR" ]; then
mkdir -p ${DESTDIR}${SERVICEDIR}
make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
[ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
[ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
mkdir -p ${DESTDIR}${SBINDIR}
chmod 0755 ${DESTDIR}${SBINDIR}
fi
install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
[ -n "$DESTDIR" -o $configure -eq 0 ] && make_parent_directory ${DESTDIR}${SBINDIR} 0755
install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0700
[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
echo "CLI installed as ${DESTDIR}${SBINDIR}/$PRODUCT"
fi
#
# Create /usr/share/shorewall-init if needed
#
mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
#
# Install logrotate file
@@ -388,55 +335,53 @@ fi
#
# Create the version file
#
echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/$PRODUCT/version
chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
#
# Remove and create the symbolic link to the init script
#
if [ -z "$DESTDIR" ]; then
rm -f ${SHAREDIR}/shorewall-init/init
ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/shorewall-init/init
rm -f ${SHAREDIR}/$PRODUCT/init
ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
fi
if [ $HOST = debian ]; then
if [ -n "${DESTDIR}" ]; then
mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
make_parent_directory ${DESTDIR}${ETC}/network/if-up.d 0755
make_parent_directory ${DESTDIR}${ETC}/network/if-down.d 0755
make_parent_directory ${DESTDIR}${ETC}/network/if-post-down.d 0755
elif [ $configure -eq 0 ]; then
mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
make_parent_directory ${DESTDIR}${CONFDIR}/network/if-up.d 0755
make_parent_directory ${DESTDIR}${CONFDIR}/network/if-down.d 0755
make_parent_directory ${DESTDIR}${CONFDIR}/network/if-post-down.d 0755
fi
if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
if [ -n "${DESTDIR}" ]; then
mkdir -p ${DESTDIR}${ETC}/default
fi
if [ ! -f ${DESTDIR}${CONFDIR}/default/$PRODUCT ]; then
[ -n "${DESTDIR}" ] && make_parent_directory ${DESTDIR}${ETC}/default 0755
[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/default 0755
install_file ${SYSCONFFILE} ${DESTDIR}${ETC}/default/$PRODUCT 0644
echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
fi
IFUPDOWN=ifupdown.debian.sh
else
if [ -n "$DESTDIR" ]; then
mkdir -p ${DESTDIR}${SYSCONFDIR}
make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
if [ -z "$RPM" ]; then
if [ $HOST = suse ]; then
mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-up.d 0755
make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-down.d 0755
elif [ $HOST = gentoo ]; then
# Gentoo does not support if-{up,down}.d
/bin/true
elif [ $HOST = openwrt ]; then
# Not implemented on openwrt
# Not implemented on OpenWRT
/bin/true
else
mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
make_parent_directory ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d 0755
fi
fi
fi
@@ -458,13 +403,13 @@ if [ $HOST != openwrt ]; then
[ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
install_file ifupdown ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown 0544
fi
if [ -d ${DESTDIR}/etc/NetworkManager ]; then
[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d 0755
install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
fi
@@ -483,8 +428,8 @@ case $HOST in
suse)
if [ -z "$RPM" ]; then
if [ $configure -eq 0 ]; then
mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-up.d 0755
make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-down.d 0755
fi
install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
@@ -518,17 +463,17 @@ if [ -z "$DESTDIR" ]; then
if [ $HOST = debian ]; then
if [ -n "$SERVICEDIR" ]; then
if systemctl enable ${PRODUCT}.service; then
echo "Shorewall Init will start automatically at boot"
echo "$Product will start automatically at boot"
fi
elif mywhich insserv; then
if insserv ${INITDIR}/shorewall-init; then
echo "Shorewall Init will start automatically at boot"
if insserv ${INITDIR}/$PRODUCT; then
echo "$Product will start automatically at boot"
else
cant_autostart
fi
elif mywhich update-rc.d ; then
if update-rc.d $PRODUCT enable; then
echo "$PRODUCT will start automatically at boot"
echo "$Product will start automatically at boot"
echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
else
cant_autostart
@@ -549,31 +494,31 @@ if [ -z "$DESTDIR" ]; then
/bin/true
else
if [ -n "$SERVICEDIR" ]; then
if systemctl enable shorewall-init.service; then
echo "Shorewall Init will start automatically at boot"
if systemctl enable ${PRODUCT}.service; then
echo "$Product will start automatically at boot"
fi
elif [ -x ${SBINDIR}/insserv -o -x /usr${SBINDIR}/insserv ]; then
if insserv ${INITDIR}/shorewall-init ; then
echo "Shorewall Init will start automatically at boot"
if insserv ${INITDIR}/$PRODUCT ; then
echo "$Product will start automatically at boot"
else
cant_autostart
fi
elif [ -x ${SBINDIR}/chkconfig -o -x /usr${SBINDIR}/chkconfig ]; then
if chkconfig --add shorewall-init ; then
echo "Shorewall Init will start automatically in run levels as follows:"
chkconfig --list shorewall-init
if chkconfig --add $PRODUCT ; then
echo "$Product will start automatically at boot"
chkconfig --list $PRODUCT
else
cant_autostart
fi
elif [ -x ${SBINDIR}/rc-update ]; then
if rc-update add shorewall-init default; then
echo "Shorewall Init will start automatically at boot"
if rc-update add $PRODUCT default; then
echo "$Product will start automatically at boot"
else
cant_autostart
fi
elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
/etc/init.d/$PRODUCT enable
if /etc/init.d/shorewall-init enabled; then
if /etc/init.d/$PRODUCT enabled; then
echo "$Product will start automatically at boot"
else
cant_autostart
@@ -587,11 +532,11 @@ else
if [ $configure -eq 1 -a -n "$first_install" ]; then
if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
if [ -n "${DESTDIR}" ]; then
mkdir -p ${DESTDIR}/etc/rcS.d
make_parent_directory ${DESTDIR}/etc/rcS.d 0755
fi
ln -sf ../init.d/shorewall-init ${DESTDIR}${CONFDIR}/rcS.d/S38shorewall-init
echo "Shorewall Init will start automatically at boot"
ln -sf ../init.d/$PRODUCT ${DESTDIR}${CONFDIR}/rcS.d/S38${PRODUCT}
echo "$Product will start automatically at boot"
fi
fi
fi
@@ -602,8 +547,8 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
case $HOST in
debian|suse)
for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
mkdir -p ${DESTDIR}/etc/ppp/$directory #SuSE doesn't create the IPv6 directories
cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
make_parent_directory ${DESTDIR}/etc/ppp/$directory 0755 #SuSE doesn't create the IPv6 directories
cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
done
;;
redhat)
@@ -614,19 +559,19 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
FILE=${DESTDIR}/etc/ppp/$file
if [ -f $FILE ]; then
if grep -qF Shorewall-based $FILE ; then
cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
else
echo "$FILE already exists -- ppp devices will not be handled"
break
fi
else
cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
fi
done
;;
esac
fi
#
# Report Success
# Report Success
#
echo "shorewall Init Version $VERSION Installed"

View File

@@ -104,7 +104,9 @@ shorewall_stop () {
if [ -n "$SAVE_IPSETS" ]; then
mkdir -p $(dirname "$SAVE_IPSETS")
if ipset -S > "${SAVE_IPSETS}.tmp"; then
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
else
rm -f "${SAVE_IPSETS}.tmp"
fi
fi

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Script to back uninstall Shoreline Firewall
# Script to back uninstall Shoreline Firewall Init
#
# (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
#
@@ -26,62 +26,34 @@
# You may only use this script to uninstall the version
# shown below. Simply run this script to remove Shorewall Firewall
VERSION=xxx #The Build script inserts the actual version
VERSION=xxx # The Build script inserts the actual version
PRODUCT=shorewall-init
Product="Shorewall Init"
usage() # $1 = exit status
{
ME=$(basename $0)
echo "usage: $ME [ <shorewallrc file> ]"
echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
echo "where <option> is one of"
echo " -h"
echo " -v"
echo " -n"
exit $1
}
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
qt()
{
"$@" >/dev/null 2>&1
}
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
return 0
fi
done
return 2
}
remove_file() # $1 = file to restore
{
if [ -f $1 -o -L $1 ] ; then
rm -f $1
echo "$1 Removed"
fi
}
#
# Change to the directory containing this script
#
cd "$(dirname $0)"
#
# Source common functions
#
. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
#
# Parse the run line
#
finished=0
configure=1
@@ -118,16 +90,17 @@ while [ $finished -eq 0 ]; do
;;
esac
done
#
# Read the RC file
#
if [ $# -eq 0 ]; then
if [ -f ./shorewallrc ]; then
. ./shorewallrc
. ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
elif [ -f ~/.shorewallrc ]; then
. ~/.shorewallrc || exit 1
. ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
elif [ -f /usr/share/shorewall/shorewallrc ]; then
. /usr/share/shorewall/shorewallrc
. /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
else
fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
fi
@@ -137,72 +110,72 @@ elif [ $# -eq 1 ]; then
/*|.*)
;;
*)
file=./$file
file=./$file || exit 1
;;
esac
. $file || exit 1
. $file || fatal_error "Can not load the RC file: $file"
else
usage 1
fi
if [ -f ${SHAREDIR}/shorewall-init/version ]; then
INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-init/version)"
if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
echo "WARNING: Shorewall Init Version $INSTALLED_VERSION is installed"
echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
echo " and this is the $VERSION uninstaller."
VERSION="$INSTALLED_VERSION"
fi
else
echo "WARNING: Shorewall Init Version $VERSION is not installed"
echo "WARNING: $Product Version $VERSION is not installed"
VERSION=""
fi
[ -n "${LIBEXEC:=${SHAREDIR}}" ]
echo "Uninstalling Shorewall Init $VERSION"
echo "Uninstalling $Product $VERSION"
[ -n "$SANDBOX" ] && configure=0
INITSCRIPT=${CONFDIR}/init.d/shorewall-init
[ -n "${LIBEXEC:=${SHAREDIR}}" ]
if [ -f "$INITSCRIPT" ]; then
remove_file ${SBINDIR}/$PRODUCT
FIREWALL=${CONFDIR}/init.d/$PRODUCT
if [ -f "$FIREWALL" ]; then
if [ $configure -eq 1 ]; then
if [ $HOST = openwrt ]; then
if /etc/init.d/shorewall-init enabled; then
/etc/init.d/shorewall-init disable
if [ $HOST = openwrt ] ; then
if /etc/init.d/$PRODUCT enabled; then
/etc/init.d/$PRODUCT disable
fi
elif mywhich updaterc.d ; then
updaterc.d shorewall-init remove
elif mywhich insserv ; then
insserv -r $INITSCRIPT
insserv -r $FIREWALL
elif mywhich update-rc.d ; then
update-rc.d ${PRODUCT} remove
elif mywhich chkconfig ; then
chkconfig --del $(basename $INITSCRIPT)
chkconfig --del $(basename $FIREWALL)
fi
fi
remove_file $INITSCRIPT
remove_file $FIREWALL
fi
if [ -z "${SERVICEDIR}" ]; then
SERVICEDIR="$SYSTEMD"
fi
[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
if [ -n "$SERVICEDIR" ]; then
[ $configure -eq 1 ] && systemctl disable shorewall-init.service
rm -f $SERVICEDIR/shorewall-init.service
[ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
remove_file $SERVICEDIR/${PRODUCT}.service
fi
if [ $HOST = openwrt ]; then
[ "$(readlink -q ${SBINDIR}/ifup-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
[ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
[ "$(readlink -q ${SBINDIR}/ifup-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
[ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
else
[ "$(readlink -m -q ${SBINDIR}/ifup-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
[ "$(readlink -m -q ${SBINDIR}/ifup-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
[ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
fi
remove_file ${CONFDIR}/default/shorewall-init
remove_file ${CONFDIR}/sysconfig/shorewall-init
remove_file ${CONFDIR}/default/$PRODUCT
remove_file ${CONFDIR}/sysconfig/$PRODUCT
remove_file ${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall
@@ -227,10 +200,11 @@ if [ -d ${CONFDIR}/ppp ]; then
done
fi
rm -f ${SBINDIR}/shorewall-init
rm -rf ${SHAREDIR}/shorewall-init
rm -rf ${LIBEXECDIR}/shorewall-init
echo "Shorewall Init Uninstalled"
remove_directory ${SHAREDIR}/$PRODUCT
remove_directory ${LIBEXECDIR}/$PRODUCT
remove_file ${CONFDIR}/logrotate.d/$PRODUCT
#
# Report Success
#
echo "$Product $VERSION Uninstalled"

View File

@@ -0,0 +1,26 @@
#
# Global start/restart/reload/stop options
#
OPTIONS=""
#
# Start options
#
STARTOPTIONS=""
#
# Restart options
#
RESTARTOPTIONS=""
#
# Reload options
#
RELOADOPTIONS=""
#
# Stop options
#
STOPOPTIONS=""
# EOF

View File

@@ -1,5 +1,5 @@
# prevent startup with default configuration
# set the following varible to 1 in order to allow Shorewall-lite to start
# set the following variable to 1 in order to allow Shorewall-lite to start
startup=0
@@ -16,7 +16,7 @@ startup=0
# wait_interface=
#
# Startup options
# Global start/restart/reload/stop options
#
OPTIONS=""
@@ -30,6 +30,16 @@ STARTOPTIONS=""
#
RESTARTOPTIONS=""
#
# Reload options
#
RELOADOPTIONS=""
#
# Stop options
#
STOPOPTIONS=""
#
# Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
#

View File

@@ -22,62 +22,19 @@
# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
VERSION=xxx #The Build script inserts the actual version
VERSION=xxx # The Build script inserts the actual version
usage() # $1 = exit status
{
ME=$(basename $0)
echo "usage: $ME [ <configuration-file> ]"
echo " $ME -v"
echo " $ME -h"
echo " $ME -n"
echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
echo "where <option> is one of"
echo " -h"
echo " -v"
echo " -n"
exit $1
}
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
qt()
{
"$@" >/dev/null 2>&1
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
echo $dir/$1
return 0
fi
done
return 2
}
cant_autostart()
{
echo
echo "WARNING: Unable to configure $Product to start automatically at boot" >&2
}
delete_file() # $1 = file to delete
{
rm -f $1
}
install_file() # $1 = source $2 = target $3 = mode
{
if cp -f $1 $2; then
@@ -96,19 +53,6 @@ install_file() # $1 = source $2 = target $3 = mode
exit 1
}
make_directory() # $1 = directory , $2 = mode
{
mkdir -p $1
chmod 755 $1
[ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
}
require()
{
eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
}
#
# Change to the directory containing this script
#
@@ -122,6 +66,11 @@ else
Product="Shorewall6 Lite"
fi
#
# Source common functions
#
. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
#
# Parse the run line
#
@@ -168,12 +117,14 @@ done
#
if [ $# -eq 0 ]; then
if [ -f ./shorewallrc ]; then
. ./shorewallrc || exit 1
file=./shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
elif [ -f ~/.shorewallrc ]; then
. ~/.shorewallrc
file=~/.shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
elif [ -f /usr/share/shorewall/shorewallrc ]; then
. /usr/share/shorewall/shorewallrc
file=/usr/share/shorewall/shorewallrc
. $file || fatal_error "Can not load the RC file: $file"
else
fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
fi
@@ -183,11 +134,11 @@ elif [ $# -eq 1 ]; then
/*|.*)
;;
*)
file=./$file
file=./$file || exit 1
;;
esac
. $file
. $file || fatal_error "Can not load the RC file: $file"
else
usage 1
fi
@@ -318,8 +269,7 @@ case "$HOST" in
linux)
;;
*)
echo "ERROR: Unknown HOST \"$HOST\"" >&2
exit 1;
fatal_error "ERROR: Unknown HOST \"$HOST\""
;;
esac
@@ -331,7 +281,7 @@ if [ -n "$DESTDIR" ]; then
OWNERSHIP=""
fi
make_directory ${DESTDIR}${INITDIR} 755
make_parent_directory ${DESTDIR}${INITDIR} 0755
else
if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
@@ -371,25 +321,20 @@ fi
delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
[ -n "${INITFILE}" ] && make_parent_directory ${DESTDIR}${INITDIR} 0755
#
# Create ${CONFDIR}/$PRODUCT, /usr/share/$PRODUCT and /var/lib/$PRODUCT if needed
#
mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT
mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
mkdir -p ${DESTDIR}${SBINDIR}
mkdir -p ${DESTDIR}${VARDIR}
chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
make_parent_directory ${DESTDIR}${CONFDIR}/$PRODUCT 0755
make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
make_parent_directory ${DESTDIR}${SBINDIR} 0755
make_parent_directory ${DESTDIR}${VARDIR} 0755
if [ -n "$DESTDIR" ]; then
mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
mkdir -p ${DESTDIR}${INITDIR}
chmod 755 ${DESTDIR}${INITDIR}
make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
make_parent_directory ${DESTDIR}${INITDIR} 0755
fi
if [ -n "$INITFILE" ]; then
@@ -410,9 +355,9 @@ if [ -z "${SERVICEDIR}" ]; then
fi
if [ -n "$SERVICEDIR" ]; then
mkdir -p ${DESTDIR}${SERVICEDIR}
make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
[ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
[ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
fi
@@ -441,8 +386,14 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
#
for f in lib.* ; do
if [ -f $f ]; then
install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
case $f in
*installer)
;;
*)
install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
;;
esac
fi
done
@@ -470,12 +421,12 @@ if [ -f modules ]; then
fi
if [ -f helpers ]; then
install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 0600
echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
fi
for f in modules.*; do
install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
done
@@ -486,19 +437,19 @@ done
if [ -d manpages -a -n "$MANDIR" ]; then
cd manpages
mkdir -p ${DESTDIR}${MANDIR}/man5/
make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
for f in *.5; do
gzip -c $f > $f.gz
install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 0644
echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
done
mkdir -p ${DESTDIR}${MANDIR}/man8/
make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
for f in *.8; do
gzip -c $f > $f.gz
install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
done
@@ -508,7 +459,7 @@ if [ -d manpages -a -n "$MANDIR" ]; then
fi
if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
fi
@@ -516,7 +467,7 @@ fi
# Create the version file
#
echo "$VERSION" > ${DESTDIR}${SHAREDIR}/$PRODUCT/version
chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
#
# Remove and create the symbolic link to the init script
#
@@ -539,10 +490,7 @@ ln -sf shorewall ${DESTDIR}${SBINDIR}/${PRODUCT}
# Note -- not all packages will have the SYSCONFFILE so we need to check for its existance here
#
if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
if [ ${DESTDIR} ]; then
mkdir -p ${DESTDIR}${SYSCONFDIR}
chmod 755 ${DESTDIR}${SYSCONFDIR}
fi
[ ${DESTDIR} ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
@@ -610,6 +558,6 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
fi
#
# Report Success
# Report Success
#
echo "$Product Version $VERSION Installed"

View File

@@ -28,7 +28,7 @@
#
# On the target system (the system where the firewall program is to run):
#
# [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
# [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
#
# Now move the capabilities file to the compilation system. The file must
# be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,7 +38,6 @@
#
# IPTABLES - iptables
# MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
# MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
#
# Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
# used during firewall compilation, then the generated firewall program will likewise not

View File

@@ -16,7 +16,7 @@ RemainAfterExit=yes
EnvironmentFile=-/etc/default/shorewall-lite
StandardOutput=syslog
ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
ExecStop=/sbin/shorewall-lite $OPTIONS stop
ExecStop=/sbin/shorewall-lite $OPTIONS clear
ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
[Install]

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Script to back uninstall Shoreline Firewall
# Script to back uninstall Shoreline Firewall Lite
#
# (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
#
@@ -26,9 +26,7 @@
# You may only use this script to uninstall the version
# shown below. Simply run this script to remove Shorewall Firewall
VERSION=xxx #The Build script inserts the actual version
PRODUCT=shorewall-lite
Product="Shorewall Lite"
VERSION=xxx # The Build script inserts the actual version
usage() # $1 = exit status
{
@@ -41,46 +39,27 @@ usage() # $1 = exit status
exit $1
}
fatal_error()
{
echo " ERROR: $@" >&2
exit 1
}
#
# Change to the directory containing this script
#
cd "$(dirname $0)"
qt()
{
"$@" >/dev/null 2>&1
}
if [ -f shorewall-lite.service ]; then
PRODUCT=shorewall-lite
Product="Shorewall Lite"
else
PRODUCT=shorewall6-lite
Product="Shorewall6 Lite"
fi
split() {
local ifs
ifs=$IFS
IFS=:
set -- $1
echo $*
IFS=$ifs
}
mywhich() {
local dir
for dir in $(split $PATH); do
if [ -x $dir/$1 ]; then
return 0
fi
done
return 2
}
remove_file() # $1 = file to restore
{
if [ -f $1 -o -L $1 ] ; then
rm -f $1
echo "$1 Removed"
fi
}
#
# Source common functions
#
. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
#
# Parse the run line
#
finished=0
configure=1
@@ -97,7 +76,7 @@ while [ $finished -eq 0 ]; do
usage 0
;;
v)
echo "$Product Firewall Installer Version $VERSION"
echo "$Product Firewall Uninstaller Version $VERSION"
exit 0
;;
n*)
@@ -117,16 +96,17 @@ while [ $finished -eq 0 ]; do
;;
esac
done
#
# Read the RC file
#
if [ $# -eq 0 ]; then
if [ -f ./shorewallrc ]; then
. ./shorewallrc
. ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
elif [ -f ~/.shorewallrc ]; then
. ~/.shorewallrc || exit 1
. ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
elif [ -f /usr/share/shorewall/shorewallrc ]; then
. /usr/share/shorewall/shorewallrc
. /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
else
fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
fi
@@ -136,46 +116,50 @@ elif [ $# -eq 1 ]; then
/*|.*)
;;
*)
file=./$file
file=./$file || exit 1
;;
esac
. $file
. $file || fatal_error "Can not load the RC file: $file"
else
usage 1
fi
if [ -f ${SHAREDIR}/shorewall-lite/version ]; then
INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-lite/version)"
if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
echo "WARNING: Shorewall Lite Version $INSTALLED_VERSION is installed"
echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
echo " and this is the $VERSION uninstaller."
VERSION="$INSTALLED_VERSION"
fi
else
echo "WARNING: Shorewall Lite Version $VERSION is not installed"
echo "WARNING: $Product Version $VERSION is not installed"
VERSION=""
fi
echo "Uninstalling Shorewall Lite $VERSION"
echo "Uninstalling $Product $VERSION"
[ -n "$SANDBOX" ] && configure=0
if [ $configure -eq 1 ]; then
if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
shorewall-lite clear
${SBINDIR}/$PRODUCT clear
elif qt ip6tables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall6 ]; then
${SBINDIR}/$PRODUCT clear
fi
fi
if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
remove_file ${SBINDIR}/$PRODUCT
if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
if [ $HOST = openwrt ]; then
if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
/etc/init.d/shorewall-lite disable
if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
/etc/init.d/$PRODUCT disable
fi
FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
FIREWALL=$(readlink ${SHAREDIR}/$PRODUCT/init)
else
FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
FIREWALL=$(readlink -m -q ${SHAREDIR}/$PRODUCT/init)
fi
elif [ -n "$INITFILE" ]; then
FIREWALL=${INITDIR}/${INITFILE}
@@ -183,10 +167,10 @@ fi
if [ -f "$FIREWALL" ]; then
if [ $configure -eq 1 ]; then
if mywhich updaterc.d ; then
updaterc.d shorewall-lite remove
elif mywhich insserv ; then
if mywhich insserv ; then
insserv -r $FIREWALL
elif mywhich update-rc.d ; then
update-rc.d ${PRODUCT} remove
elif mywhich chkconfig ; then
chkconfig --del $(basename $FIREWALL)
fi
@@ -195,26 +179,29 @@ if [ -f "$FIREWALL" ]; then
remove_file $FIREWALL
fi
[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
if [ -n "$SERVICEDIR" ]; then
[ $configure -eq 1 ] && systemctl disable ${PRODUCT}
rm -f $SERVICEDIR/shorewall-lite.service
[ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
remove_file $SERVICEDIR/${PRODUCT}.service
fi
rm -f ${SBINDIR}/shorewall-lite
remove_directory ${CONFDIR}/$PRODUCT
remove_directory ${VARDIR}
remove_directory ${SHAREDIR}/$PRODUCT
remove_directory ${LIBEXECDIR}/$PRODUCT
remove_file ${CONFDIR}/logrotate.d/$PRODUCT
rm -rf ${CONFDIR}/shorewall-lite
rm -rf ${VARDIR}
rm -rf ${SHAREDIR}/shorewall-lite
rm -rf ${LIBEXECDIR}/shorewall-lite
rm -f ${CONFDIR}/logrotate.d/shorewall-lite
rm -f ${SYSCONFDIR}/shorewall-lite
if [ -n "$SYSCONFDIR" ]; then
[ -n "$SYSCONFFILE" ] && remove_file ${SYSCONFDIR}/${PRODUCT}
fi
if [ -n "${MANDIR}" ]; then
rm -f ${MANDIR}/man5/shorewall-lite*
rm -f ${MANDIR}/man8/shorewall-lite*
remove_file_with_wildcard ${MANDIR}/man5/${PRODUCT}\*
remove_file_with_wildcard ${MANDIR}/man8/${PRODUCT}\*
fi
echo "Shorewall Lite Uninstalled"
#
# Report Success
#
echo "$Product $VERSION Uninstalled"

View File

@@ -0,0 +1,9 @@
#
# Shorewall6 -- /usr/share/shorewall/action.A_AllowICMPs
#
# This action A_ACCEPTs needed ICMP types
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT
AllowICMPs(A_ACCEPT)

View File

@@ -12,6 +12,8 @@
#
# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
#
?require AUDIT_TARGET
?warning "You are using the deprecated A_Drop default action. Please see http://www.shorewall.net/Actions.html
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT
#
@@ -30,9 +32,10 @@ Auth(A_DROP)
#
A_AllowICMPs - - icmp
#
# Don't log broadcasts
# Don't log broadcasts and multicasts
#
dropBcast(audit)
dropMcast(audit)
#
# Drop packets that are in the INVALID state -- these are usually ICMP packets
# and just confuse people when they appear in the log.

View File

@@ -22,8 +22,9 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
###############################################################################
?require AUDIT_TARGET
DEFAULTS -

View File

@@ -22,8 +22,9 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# A_REJECTWITH[([<option>])] where <option> is a valid REJECT option.#
# A_REJECT[([<option>])] where <option> is a valid REJECT option.#
###############################################################################
?require AUDIT_TARGET
DEFAULTS -

View File

@@ -11,6 +11,8 @@
# internet operation are always ACCEPTed.
#
# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
?require AUDIT_TARGET
?warning "You are using the deprecated A_REJECT default action. Please see http://www.shorewall.net/Actions.html
###############################################################################
#ACTION SOURCE DEST PROTO
#
@@ -25,10 +27,11 @@ COUNT
#
A_AllowICMPs - - icmp
#
# Drop Broadcasts so they don't clutter up the log
# (broadcasts must *not* be rejected).
# Drop Broadcasts and multicasts so they don't clutter up the log
# (these must *not* be rejected).
#
dropBcast(audit)
dropMcast(audit)
#
# Drop packets that are in the INVALID state -- these are usually ICMP packets
# and just confuse people when they appear in the log (these ICMPs cannot be

View File

@@ -0,0 +1,45 @@
#
# Shorewall -- /usr/share/shorewall/action.AllowICMPs
#
# This action ACCEPTs needed ICMP types.
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
DEFAULTS ACCEPT
?if __IPV4
@1 - - icmp fragmentation-needed {comment="Needed ICMP types"}
@1 - - icmp time-exceeded {comment="Needed ICMP types"}
?else
?COMMENT Needed ICMP types (RFC4890)
@1 - - ipv6-icmp destination-unreachable
@1 - - ipv6-icmp packet-too-big
@1 - - ipv6-icmp time-exceeded
@1 - - ipv6-icmp parameter-problem
# The following should have a ttl of 255 and must be allowed to transit a bridge
@1 - - ipv6-icmp router-solicitation
@1 - - ipv6-icmp router-advertisement
@1 - - ipv6-icmp neighbour-solicitation
@1 - - ipv6-icmp neighbour-advertisement
@1 - - ipv6-icmp 137 # Redirect
@1 - - ipv6-icmp 141 # Inverse neighbour discovery solicitation
@1 - - ipv6-icmp 142 # Inverse neighbour discovery advertisement
# The following should have a link local source address and must be allowed to transit a bridge
@1 fe80::/10 - ipv6-icmp 130 # Listener query
@1 fe80::/10 - ipv6-icmp 131 # Listener report
@1 fe80::/10 - ipv6-icmp 132 # Listener done
@1 fe80::/10 - ipv6-icmp 143 # Listener report v2
# The following should be received with a ttl of 255 and must be allowed to transit a bridge
@1 - - ipv6-icmp 148 # Certificate path solicitation
@1 - - ipv6-icmp 149 # Certificate path advertisement
# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
@1 fe80::/10 - ipv6-icmp 151 # Multicast router advertisement
@1 fe80::/10 - ipv6-icmp 152 # Multicast router solicitation
@1 fe80::/10 - ipv6-icmp 153 # Multicast router termination
?endif

View File

@@ -0,0 +1,50 @@
#
# Shorewall - /usr/share/shorewall/action.BLACKLIST
#
# This action:
#
# - Adds the sender to the dynamic blacklist ipset
# - Optionally acts on the packet (default is DROP)
#
# Parameters:
#
# 1 - Action to take after adding the packet. Default is DROP.
# Pass -- if you don't want to take any action.
# 2 - Timeout for ipset entry. Default is the timeout specified in
# DYNAMIC_BLACKLIST or the one specified when the ipset was created.
#
###############################################################################
# Note -- This action is defined with the 'section' option, so the first
# parameter is always the section name. That means that in the
# following text, the first parameter passed in the rule is actually
# @2.
###############################################################################
?if $1 eq 'BLACKLIST'
?if $BLACKLIST_LOG_LEVEL
blacklog
?else
$BLACKLIST_DISPOSITION
?endif
?else
?if ! "$SW_DBL_IPSET"
? error The BLACKLIST action may only be used with ipset-based dynamic blacklisting
?endif
DEFAULTS -,DROP,-
#
# Add to the blacklist
#
?if passed(@3)
ADD($SW_DBL_IPSET:src:@3)
?elsif $SW_DBL_TIMEOUT
ADD($SW_DBL_IPSET:src:$SW_DBL_TIMEOUT)
?else
ADD($SW_DBL_IPSET:src)
?endif
#
# Dispose of the packet if asked
#
?if passed(@2)
@2
?endif
?endif

View File

@@ -20,7 +20,7 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Broadcast[([<action>|-[,{audit|-}])]
# Broadcast[([<action>|[,{audit|-}])]
#
# Default action is DROP
#
@@ -29,31 +29,37 @@
DEFAULTS DROP,-
?if __ADDRTYPE
@1 - - - ;; -m addrtype --dst-type BROADCAST
@1 - - - ;; -m addrtype --dst-type MULTICAST
@1 - - - ;; -m addrtype --dst-type ANYCAST
@1 - - - ;; -m addrtype --dst-type BROADCAST
@1 - - - ;; -m addrtype --dst-type ANYCAST
?else
?begin perl;
?begin perl;
use Shorewall::IPAddrs;
use Shorewall::Config;
use Shorewall::Chains;
use strict;
use Shorewall::IPAddrs;
use Shorewall::Config;
use Shorewall::Chains;
my ( $action ) = get_action_params( 1 );
my $chainref = get_action_chain;
my ( $level, $tag ) = get_action_logging;
my ( $action, $audit ) = get_action_params( 2 );
my $chainref = get_action_chain;
my ( $level, $tag ) = get_action_logging;
add_commands $chainref, 'for address in $ALL_BCASTS; do';
incr_cmd_level $chainref;
log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
add_jump $chainref, $action, 0, "-d \$address ";
decr_cmd_level $chainref;
add_commands $chainref, 'done';
fatal_error "Invalid parameter to action Broadcast" if supplied $audit && $audit ne 'audit';
log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d 224.0.0.0/4 ' if $level ne '';
add_jump $chainref, $action, 0, '-d 224.0.0.0/4 ';
my $target = require_audit ( $action , $audit );
1;
if ( $family == F_IPV4 ) {
add_commands $chainref, 'for address in $ALL_BCASTS; do';
} elsif ($family == F_IPV6 ) {
add_commands $chainref, 'for address in $ALL_ACASTS; do';
}
?end perl;
incr_cmd_level $chainref;
log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
add_jump $chainref, $target, 0, "-d \$address ";
decr_cmd_level $chainref;
add_commands $chainref, 'done';
1;
?end perl;
?endif

View File

@@ -1,7 +1,7 @@
#
# Shorewall -- /usr/share/shorewall/action.Drop
#
# The default DROP common rules
# The former default DROP common rules. Use of this action is now deprecated
#
# This action is invoked before a DROP policy is enforced. The purpose
# of the action is:
@@ -20,7 +20,7 @@
# depending on the setting of the first parameter.
# 4 - Action to take with required ICMP packets. Default is ACCEPT or
# A_ACCEPT depending on the first parameter.
# 5 - Action to take with late UDP replies (UDP source port 53). Default
# 5 - Action to take with late DNS replies (UDP source port 53). Default
# is DROP or A_DROP depending on the first parameter.
# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
# depending on the first parameter.
@@ -28,6 +28,7 @@
# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
#
###############################################################################
?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
?if passed(@1)
?if @1 eq 'audit'
@@ -58,9 +59,10 @@ Auth(@2)
#
AllowICMPs(@4) - - icmp
#
# Don't log broadcasts
# Don't log broadcasts or multicasts
#
Broadcast(DROP,@1)
Multicast(DROP,@1)
#
# Drop packets that are in the INVALID state -- these are usually ICMP packets
# and just confuse people when they appear in the log.

View File

@@ -0,0 +1,10 @@
#
# Shorewall -- /usr/share/shorewall/action.DropDNSrep
#
# This macro silently drops DNS UDP replies that are in the New state
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
DEFAULTS DROP
@1 - - udp - 53 { comment="Late DNS Replies" }

View File

@@ -0,0 +1,33 @@
#
# Shorewall -- /usr/share/shorewall/action.FIN
#
# FIN Action
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# FIN[([<action>])]
#
# Default action is ACCEPT
#
###############################################################################
DEFAULTS ACCEPT,-
@1 - - ;;+ -p 6 --tcp-flags ACK,FIN,PSH ACK,FIN,PSH

View File

@@ -13,9 +13,9 @@
DEFAULTS 2,0
?if @1 !~ /^\d+/ || ! @1 || @1 > 1024
?error Invalid value for Bricks (@1)
?error Invalid value (@1) for the GlusterFS Bricks argument
?elsif @2 !~ /^[01]$/
?error Invalid value for IB (@2)
?error Invalid value (@2) for the GlusterFS IB argument
?endif
#ACTION SOURCE DEST PROTO DPORT

View File

@@ -107,6 +107,11 @@ if ( $command & $REAP_OPT ) {
$duration .= '--rttl ' if $command & $TTL_OPT;
if ( ( $targets{$action} || 0 ) & NATRULE ) {
perl_action_helper( "${action}-", "-m recent --rcheck ${duration}--hitcount $hitcount" );
$action = 'ACCEPT';
}
if ( $command & $RESET_CMD ) {
require_capability 'MARK_ANYWHERE', '"reset"', 's';

View File

@@ -0,0 +1,70 @@
#
# Shorewall -- /usr/share/shorewall/action.Limit
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Limit(<recent-set>,<num-connections>,<timeout>)
#
###############################################################################
DEFAULTS -,-,-
?begin perl
use strict;
use Shorewall::Config;
use Shorewall::Chains;
my $chainref = get_action_chain;
my @param = get_action_params(3);
my ( $level, $tag ) = get_action_logging;
@param = split( ',', $tag ), $tag = $param[0] unless supplied( join '', @param );
fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag or as parameters' unless @param == 3;
my $set = $param[0];
for ( @param[1,2] ) {
fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
}
my $count = $param[1] + 1;
require_capability( 'RECENT_MATCH' , 'Limit rules' , '' );
warning_message "The Limit action is deprecated in favor of per-IP rate limiting using the RATE LIMIT column";
add_irule $chainref, recent => "--name $set --set";
if ( $level ne '' ) {
my $xchainref = new_chain 'filter' , "$chainref->{name}%";
log_irule_limit( $level, $xchainref, '', 'DROP', [], $tag, 'add' , '' );
add_ijump $xchainref, j => 'DROP';
add_ijump $chainref, j => $xchainref, recent => "--name $set --update --seconds $param[2] --hitcount $count";
} else {
add_ijump $chainref, j => 'DROP', recent => "--update --name $set --seconds $param[2] --hitcount $count";
}
add_ijump $chainref, j => 'ACCEPT';
1;
?end perl

View File

@@ -0,0 +1,56 @@
#
# Shorewall -- /usr/share/shorewall/action.Multicast
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Multicast[([<action>|-[,{audit|-}])]
#
# Default action is DROP
#
###############################################################################
DEFAULTS DROP,-
?if __ADDRTYPE
@1 - - - ;; -m addrtype --dst-type MULTICAST
?else
?begin perl;
use strict;
use Shorewall::IPAddrs;
use Shorewall::Config;
use Shorewall::Chains;
my ( $action, $audit ) = get_action_params( 2 );
my $chainref = get_action_chain;
my ( $level, $tag ) = get_action_logging;
fatal_error "Invalid parameter to action Multicast" if supplied $audit && $audit ne 'audit';
my $target = require_audit ( $action , $audit );
my $dest = ( $family == F_IPV4 ) ? join( ' ', '-d', IPv4_MULTICAST . ' ' ) : join( ' ', '-d', IPv6_MULTICAST . ' ' );
log_rule_limit( $level, $chainref, 'Multicast' , $action, '', $tag, 'add', $dest ) if $level ne '';
add_jump $chainref, $target, 0, $dest;
1;
?end perl;
?endif

View File

@@ -1,7 +1,7 @@
#
# Shorewall -- /usr/share/shorewall/action.Reject
#
# The default REJECT action common rules
# The former default REJECT action common rules. Use of this action is deprecated.
#
# This action is invoked before a REJECT policy is enforced. The purpose
# of the action is:
@@ -20,13 +20,14 @@
# depending on the setting of the first parameter.
# 4 - Action to take with required ICMP packets. Default is ACCEPT or
# A_ACCEPT depending on the first parameter.
# 5 - Action to take with late UDP replies (UDP source port 53). Default
# 5 - Action to take with late DNS replies (UDP source port 53). Default
# is DROP or A_DROP depending on the first parameter.
# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
# depending on the first parameter.
#
# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
###############################################################################
?warning "You are using the deprecated Reject default action. Please see http://www.shorewall.net/Actions.html#Default"
?if passed(@1)
?if @1 eq 'audit'
@@ -61,6 +62,7 @@ AllowICMPs(@4) - - icmp
# (broadcasts must *not* be rejected).
#
Broadcast(DROP,@1)
Multicast(DROP,@1)
#
# Drop packets that are in the INVALID state -- these are usually ICMP packets
# and just confuse people when they appear in the log (these ICMPs cannot be

View File

@@ -41,6 +41,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
set_action_disposition( $disposition) if supplied $disposition;
set_action_name_to_caller;
if ( ( $targets{$action} || 0 ) & NATRULE ) {
perl_action_helper( "${action}-", "" );
$action = 'ACCEPT';
}
if ( $destination eq 'dst' ) {
perl_action_helper( $action, '', '', "-m recent --name $event --remove --rdest" );
} else {

View File

@@ -37,6 +37,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
set_action_disposition( $disposition) if supplied $disposition;
set_action_name_to_caller;
if ( ( $targets{$action} || 0 ) & NATRULE ) {
perl_action_helper( "${action}-", "" );
$action = 'ACCEPT';
}
if ( $destination eq 'dst' ) {
perl_action_helper( $action, '', '', "-m recent --name $event --set --rdest" );
} else {

View File

@@ -0,0 +1,38 @@
#
# Shorewall -- /usr/share/shorewall/action.allowBcast
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# allowBcast[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
Broadcast(A_ACCEPT)
?else
?error "Invalid argument (@1) to allowBcast"
?endif
?else
Broadcast(ACCEPT)
?endif

View File

@@ -0,0 +1,38 @@
#
# Shorewall -- /usr/share/shorewall/action.allowMcast
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# allowMcast[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
Multicast(A_ACCEPT)
?else
?error "Invalid argument (@1) to allowMcast"
?endif
?else
Multicast(ACCEPT)
?endif

View File

@@ -0,0 +1,40 @@
#
# Shorewall -- /usr/share/shorewall/action.allowinUPnP
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# allowinUPnP[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
A_ACCEPT - - 17 1900
A_ACCEPT - - 6 49152
?else
?error "Invalid argument (@1) to allowinUPnP"
?endif
?else
ACCEPT - - 17 1900
ACCEPT - - 6 49152
?endif

View File

@@ -0,0 +1,39 @@
#
# Shorewall -- /usr/share/shorewall/action.dropBcast
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# dropBcast[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
Broadcast(A_DROP)
?else
?error "Invalid argument (@1) to dropBcast"
?endif
?else
Broadcast(DROP)
?endif

View File

@@ -0,0 +1,39 @@
#
# Shorewall -- /usr/share/shorewall/action.dropBcasts
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# dropBcasts[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
Broadcast(A_DROP)
?else
?error "Invalid argument (@1) to dropBcasts"
?endif
?else
Broadcast(DROP)
?endif

View File

@@ -0,0 +1,38 @@
#
# Shorewall -- /usr/share/shorewall/action.dropMcast
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# dropMcast[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
Multicast(A_DROP)
?else
?error "Invalid argument (@1) to dropMcast"
?endif
?else
Multicast(DROP)
?endif

View File

@@ -0,0 +1,38 @@
#
# Shorewall -- /usr/share/shorewall/action.dropNotSyn
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# dropNotSyn[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
A_DROP {proto=6:!syn}
?else
?error "Invalid argument (@1) to dropNotSyn"
?endif
?else
DROP {proto=6:!syn}
?endif

View File

@@ -0,0 +1,43 @@
#
# Shorewall -- /usr/share/shorewall/action.forwardUPnP
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# forwardUPnP
#
###############################################################################
DEFAULTS -
?begin perl
use strict;
use Shorewall::Config;
use Shorewall::Chains;
my $chainref = get_action_chain;
set_optflags( $chainref, DONT_OPTIMIZE );
add_commands( $chainref , '[ -f ${VARDIR}/.forwardUPnP ] && cat ${VARDIR}/.forwardUPnP >&3' );
1;
?end perl

View File

@@ -0,0 +1,39 @@
#
# Shorewall -- /usr/share/shorewall/action.rejNotSyn
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2017 Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# rejNotSyn[([audit])]
#
###############################################################################
DEFAULTS -
?if passed(@1)
?if @1 eq 'audit'
?require AUDIT_TARGET
A_REJECT {proto=6:!syn}
?else
?error "Invalid argument (@1) to rejNotSyn"
?endif
?else
REJECT(tcp-reset) {proto=6:!syn}
?endif

View File

@@ -1,13 +0,0 @@
#
# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
#
# This macro ACCEPTs needed ICMP types.
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
?COMMENT Needed ICMP types
DEFAULT ACCEPT
PARAM - - icmp fragmentation-needed
PARAM - - icmp time-exceeded

View File

@@ -1,13 +0,0 @@
#
# Shorewall -- /usr/share/shorewall/macro.blacklist
#
# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
?if $BLACKLIST_LOGLEVEL
blacklog
?else
$BLACKLIST_DISPOSITION
?endif

View File

@@ -1,49 +0,0 @@
#
# Shorewall -- /usr/share/shorewall/macro.Drop
#
# This macro generates the same rules as the Drop default action
# It is used in place of action.Drop when USE_ACTIONS=No.
#
# Example:
#
# Drop net all
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
#
# Don't log 'auth' DROP
#
DROP - - tcp 113
#
# Drop Broadcasts so they don't clutter up the log
# (broadcasts must *not* be rejected).
#
dropBcast
#
# ACCEPT critical ICMP types
#
ACCEPT - - icmp fragmentation-needed
ACCEPT - - icmp time-exceeded
#
# Drop packets that are in the INVALID state -- these are usually ICMP packets
# and just confuse people when they appear in the log (these ICMPs cannot be
# rejected).
#
dropInvalid
#
# Drop Microsoft noise so that it doesn't clutter up the log.
#
DROP - - udp 135,445
DROP - - udp 137:139
DROP - - udp 1024: 137
DROP - - tcp 135,139,445
DROP - - udp 1900
#
# Drop 'newnotsyn' traffic so that it doesn't get logged.
#
dropNotSyn
#
# Drop late-arriving DNS replies. These are just a nuisance and clutter up
# the log.
#
DROP - - udp - 53

View File

@@ -1,12 +0,0 @@
#
# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
#
# This macro silently drops DNS UDP replies
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
?COMMENT Late DNS Replies
DEFAULT DROP
PARAM - - udp - 53

View File

@@ -6,4 +6,5 @@
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
PARAM - - udp 3389
PARAM - - tcp 3389

View File

@@ -1,49 +0,0 @@
#
# Shorewall -- /usr/share/shorewall/macro.Reject
#
# This macro generates the same rules as the Reject default action
# It is used in place of action.Reject when USE_ACTIONS=No.
#
# Example:
#
# Reject loc fw
#
###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
#
# Don't log 'auth' REJECT
#
REJECT - - tcp 113
#
# Drop Broadcasts so they don't clutter up the log
# (broadcasts must *not* be rejected).
#
dropBcast
#
# ACCEPT critical ICMP types
#
ACCEPT - - icmp fragmentation-needed
ACCEPT - - icmp time-exceeded
#
# Drop packets that are in the INVALID state -- these are usually ICMP packets
# and just confuse people when they appear in the log (these ICMPs cannot be
# rejected).
#
dropInvalid
#
# Reject Microsoft noise so that it doesn't clutter up the log.
#
REJECT - - udp 135,445
REJECT - - udp 137:139
REJECT - - udp 1024: 137
REJECT - - tcp 135,139,445
DROP - - udp 1900
#
# Drop 'newnotsyn' traffic so that it doesn't get logged.
#
dropNotSyn
#
# Drop late-arriving DNS replies. These are just a nuisance and clutter up
# the log.
#
DROP - - udp - 53

View File

@@ -1,82 +0,0 @@
# Shorewall Packet Filtering Firewall Export Directory Makefile - V4.2
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2006 - Tom Eastep (teastep@shorewall.net)
#
# Shorewall documentation is available at http://www.shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
################################################################################
# Place this file in each export directory. Modify each copy to set HOST
# to the name of the remote firewall corresponding to the directory.
#
# To make the 'firewall' script, type "make".
#
# Once the script is compiling correctly, you can install it by
# typing "make install".
#
################################################################################
# V A R I A B L E S
#
# Files in the export directory on which the firewall script does not depend
#
IGNOREFILES = firewall% Makefile% trace% %~
#
# Remote Firewall system
#
HOST = gateway
#
# Save some typing
#
LITEDIR = /var/lib/shorewall-lite
#
# Set this if the remote system has a non-standard modules directory
#
MODULESDIR=
#
# Default target is the firewall script
#
################################################################################
# T A R G E T S
#
all: firewall
#
# Only generate the capabilities file if it doesn't already exist
#
capabilities:
ssh root@$(HOST) "MODULESDIR=$(MODULESDIR) /usr/share/shorewall-lite/shorecap > $(LITEDIR)/capabilities"
scp root@$(HOST):$(LITEDIR)/capabilities .
#
# Compile the firewall script. Using the 'wildcard' function causes "*" to be expanded so that
# 'filter-out' will be presented with the list of files in this directory rather than "*"
#
firewall: $(filter-out $(IGNOREFILES) capabilities , $(wildcard *) ) capabilities
shorewall compile -e . firewall
#
# Only reload on demand.
#
install: firewall
scp firewall firewall.conf root@$(HOST):$(LITEDIR)
ssh root@$(HOST) "/sbin/shorewall-lite restart"
#
# Save running configuration
#
save:
ssh root@$(HOST) "/sbin/shorewall-lite save"
#
# Remove generated files
#
clean:
rm -f capabilities firewall firewall.conf reload

View File

@@ -195,7 +195,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
$ports = '' if $ports eq 'any' || $ports eq 'all';
$sports = '' if $sports eq 'any' || $sports eq 'all';
fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT;
fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT_SECTION;
my $rule = do_proto( $proto, $ports, $sports ) . do_user ( $user ) . do_test ( $mark, $globals{TC_MASK} ) . do_headers( $headers );
my $prerule = '';
@@ -266,7 +266,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
if ( $source eq 'any' || $source eq 'all' ) {
$source = ALLIP;
} else {
fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT || ! $asection );
fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT_SECTION || ! $asection );
}
if ( have_bridges && ! $asection ) {
@@ -519,9 +519,9 @@ sub setup_accounting() {
while ( $chainswithjumps && $progress ) {
$progress = 0;
for my $chain1 ( sort keys %accountingjumps ) {
for my $chain1 ( keys %accountingjumps ) {
if ( keys %{$accountingjumps{$chain1}} ) {
for my $chain2 ( sort keys %{$accountingjumps{$chain1}} ) {
for my $chain2 ( keys %{$accountingjumps{$chain1}} ) {
delete $accountingjumps{$chain1}{$chain2}, $progress = 1 unless $accountingjumps{$chain2};
}
} else {

View File

@@ -32,6 +32,7 @@ require Exporter;
use Scalar::Util 'reftype';
use Digest::SHA qw(sha1_hex);
use File::Basename;
use Socket;
use Shorewall::Config qw(:DEFAULT :internal);
use Shorewall::Zones;
use Shorewall::IPAddrs;
@@ -137,6 +138,12 @@ our %EXPORT_TAGS = (
ALL_COMMANDS
NOT_RESTORE
validate_port
validate_portpair
validate_portpair1
validate_port_list
expand_port_range
PREROUTING
INPUT
FORWARD
@@ -405,14 +412,14 @@ our $VERSION = 'MODULEVERSION';
# Provider Chains for provider <p>
# Load Balance - ~<p>
#
# Zone-pair chains for rules chain <z12z2>
# Zone-pair chains for rules chain <z1-z2>
#
# Syn Flood - @<z12z2>
# Blacklist - <z12z2>~
# Established - ^<z12z2>
# Related - +<z12z2>
# Invalid - _<z12z2>
# Untracked - &<z12z2>
# Syn Flood - @<z1-z2>
# Blacklist - <z1-z2>~
# Established - ^<z1-z2>
# Related - +<z1-z2>
# Invalid - _<z1-z2>
# Untracked - &<z1-z2>
#
our %chain_table;
our $raw_table;
@@ -434,7 +441,7 @@ use constant { STANDARD => 0x1, #defined by Netfilter
REDIRECT => 0x20, #'REDIRECT'
ACTION => 0x40, #An action (may be built-in)
MACRO => 0x80, #A Macro
LOGRULE => 0x100, #'LOG','NFLOG'
LOGRULE => 0x100, #'LOG','ULOG','NFLOG'
NFQ => 0x200, #'NFQUEUE'
CHAIN => 0x400, #Manual Chain
SET => 0x800, #SET
@@ -509,6 +516,7 @@ our $idiotcount1;
our $hashlimitset;
our $global_variables;
our %address_variables;
our %port_variables;
our $ipset_rules;
#
@@ -784,6 +792,7 @@ sub initialize( $$$ ) {
%interfaceacasts = ();
%interfacegateways = ();
%address_variables = ();
%port_variables = ();
$global_variables = 0;
$idiotcount = 0;
@@ -819,6 +828,211 @@ sub initialize( $$$ ) {
#
}
sub record_runtime_port( $ ) {
my ( $variable ) = @_;
if ( $variable =~ /^{([a-zA-Z_]\w*)}$/ ) {
fatal_error "Variable %variable is already used as an address variable" if $address_variables{$1};
$port_variables{$1} = 1;
} else {
fatal_error( "Invalid port variable (%$variable)" );
}
"\$$variable";
}
################################################################################
# Functions moved from IPAddrs.pm in 5.1.5 #
################################################################################
sub validate_port( $$ ) {
my ($proto, $port) = @_;
my $value;
if ( $port =~ /^(\d+)$/ || $port =~ /^0x/ ) {
$value = numeric_value $port;
if ( defined $value ) {
if ( $value && $value <= 65535 ) {
return $value;
} else {
$value = undef;
}
}
} elsif ( $port =~ /^%(.*)/ ) {
$value = record_runtime_port( $1 );
} else {
$proto = proto_name $proto if $proto =~ /^(\d+)$/;
$value = getservbyname( $port, $proto );
}
return $value if defined $value;
fatal_error "The separator for a port range is ':', not '-' ($port)" if $port =~ /^\d+-\d+$/;
fatal_error "Invalid/Unknown $proto port/service ($_[1])" unless defined $value;
}
sub validate_portpair( $$ ) {
my ($proto, $portpair) = @_;
my $what;
my $pair = $portpair;
#
# Accept '-' as a port-range separator
#
$pair =~ tr/-/:/ if $pair =~ /^[-0-9]+$/;
fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
$pair = "0$pair" if substr( $pair, 0, 1 ) eq ':';
$pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
my @ports = split /:/, $pair, 2;
my $protonum = resolve_proto( $proto ) || 0;
$_ = validate_port( $protonum, $_) for grep $_, @ports;
if ( @ports == 2 ) {
$what = 'port range';
unless ($ports[0] =~ /^\$/ || $ports[1] =~ /^\$/ ) {
fatal_error "Invalid port range ($_[1])" unless $ports[0] < $ports[1];
}
} else {
$what = 'port';
}
fatal_error "Using a $what ( $_[1] ) requires PROTO TCP, UDP, UDPLITE, SCTP or DCCP" unless
defined $protonum && ( $protonum == TCP ||
$protonum == UDP ||
$protonum == UDPLITE ||
$protonum == SCTP ||
$protonum == DCCP );
join ':', @ports;
}
sub validate_portpair1( $$ ) {
my ($proto, $portpair) = @_;
my $what;
fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/-/-/ > 1;
$portpair = "1$portpair" if substr( $portpair, 0, 1 ) eq ':';
$portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
my @ports = split /-/, $portpair, 2;
my $protonum = resolve_proto( $proto ) || 0;
$_ = validate_port( $protonum, $_) for grep $_, @ports;
if ( @ports == 2 ) {
$what = 'port range';
unless ($ports[0] =~ /^\$/ || $ports[1] =~ /^\$/ ) {
fatal_error "Invalid port range ($portpair)" unless $ports[0] && $ports[0] < $ports[1];
}
} else {
$what = 'port';
fatal_error 'Invalid port number (0)' unless $portpair;
}
fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, SCTP or DCCP" unless
defined $protonum && ( $protonum == TCP ||
$protonum == UDP ||
$protonum == SCTP ||
$protonum == DCCP );
join '-', @ports;
}
sub validate_port_list( $$ ) {
my $result = '';
my ( $proto, $list ) = @_;
my @list = split_list( $list, 'port' );
if ( @list > 1 && $list =~ /[:-]/ ) {
require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
}
$proto = proto_name $proto;
for ( @list ) {
my $value = validate_portpair( $proto , $_ );
$result = $result ? join ',', $result, $value : $value;
}
$result;
}
#
# Expands a port range into a minimal list of ( port, mask ) pairs.
# Each port and mask are expressed as 4 hex nibbles without a leading '0x'.
#
# Example:
#
# DB<3> @foo = Shorewall::IPAddrs::expand_port_range( 6, '110:' ); print "@foo\n"
# 006e fffe 0070 fff0 0080 ff80 0100 ff00 0200 fe00 0400 fc00 0800 f800 1000 f000 2000 e000 4000 c000 8000 8000
#
sub expand_port_range( $$ ) {
my ( $proto, $range ) = @_;
if ( $range =~ /^(.*):(.*)$/ ) {
my ( $first, $last ) = ( $1, $2);
my @result;
fatal_error "Invalid port range ($range)" unless $first ne '' or $last ne '';
#
# Supply missing first/last port number
#
$first = 0 if $first eq '';
$last = 65535 if $last eq '';
#
# Validate the ports
#
( $first , $last ) = ( validate_port( $proto, $first || 1 ) , validate_port( $proto, $last ) );
$last++; #Increment last address for limit testing.
#
# Break the range into groups:
#
# - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
# - Otherwise, find the largest power of two P that divides the first address such that
# the remaining range has less than or equal to P ports. The next group is
# ( <first> , ~( P-1 ) ).
#
while ( ( my $ports = ( $last - $first ) ) > 0 ) {
my $mask = 0xffff; #Mask for current ports in group.
my $y = 2; #Next power of two to test
my $z = 1; #Number of ports in current group (Previous value of $y).
while ( ( ! ( $first % $y ) ) && ( $y <= $ports ) ) {
$mask <<= 1;
$z = $y;
$y <<= 1;
}
#
#
push @result, sprintf( '%04x', $first ) , sprintf( '%04x' , $mask & 0xffff );
$first += $z;
}
fatal_error "Invalid port range ($range)" unless @result; # first port > last port
@result;
} else {
( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
}
}
################################################################################
# End functions moved from IPAddrs.pm in 5.1.5 #
################################################################################
#
# Functions to manipulate cmdlevel
#
@@ -1081,11 +1295,11 @@ sub format_option( $$ ) {
assert( ! reftype $value );
my $rule = '';
my $rule;
$value =~ s/\s*$//;
$rule .= join( ' ' , ' -m', $option, $value );
$rule = join( ' ' , ' -m', $option, $value );
$rule;
}
@@ -1131,8 +1345,6 @@ sub format_rule( $$;$ ) {
} else {
$rule .= join( '' , ' --', $_, ' ', $value );
}
next;
} elsif ( $type == EXPENSIVE ) {
#
# Only emit expensive matches now if there are '-m nfacct' or '-m recent' matches in the rule
@@ -1191,13 +1403,15 @@ sub compatible( $$ ) {
}
#
# Don't combine chains where each specifies
# -m policy
# -m policy and the policies are different
# or when one specifies
# -m multiport
# and the other specifies
# --dport or --sport or -m multiport
#
return ! ( $ref1->{policy} && $ref2->{policy} ||
my ( $p1, $p2 );
return ! ( ( ( $p1 = $ref1->{policy} ) && ( $p2 = $ref2->{policy} ) && $p1 ne $p2 ) ||
( ( $ref1->{multiport} && ( $ref2->{dport} || $ref2->{sport} || $ref2->{multiport} ) ) ||
( $ref2->{multiport} && ( $ref1->{dport} || $ref1->{sport} ) ) ) );
}
@@ -1223,7 +1437,7 @@ sub merge_rules( $$$ ) {
}
}
for my $option ( grep ! $opttype{$_} || $_ eq 'nfacct' || $_ eq 'recent', sort { $b cmp $a } keys %$fromref ) {
for my $option ( grep ! $opttype{$_} || $_ eq 'nfacct' || $_ eq 'recent', keys %$fromref ) {
set_rule_option( $toref, $option, $fromref->{$option} );
}
@@ -1239,7 +1453,7 @@ sub merge_rules( $$$ ) {
set_rule_option( $toref, 'policy', $fromref->{policy} ) if exists $fromref->{policy};
for my $option ( grep( get_opttype( $_, 0 ) == EXPENSIVE, sort keys %$fromref ) ) {
for my $option ( grep( get_opttype( $_, 0 ) == EXPENSIVE, keys %$fromref ) ) {
set_rule_option( $toref, $option, $fromref->{$option} );
}
@@ -1715,7 +1929,7 @@ sub delete_reference( $$ ) {
assert( $toref );
delete $toref->{references}{$fromref->{name}} unless --$toref->{references}{$fromref->{name}} > 0;
delete $toref->{references}{$fromref->{name}} if --$toref->{references}{$fromref->{name}} <= 0;
}
#
@@ -1853,7 +2067,7 @@ sub adjust_reference_counts( $$$ ) {
my ($toref, $name1, $name2) = @_;
if ( $toref ) {
delete $toref->{references}{$name1} unless --$toref->{references}{$name1} > 0;
delete $toref->{references}{$name1} if --$toref->{references}{$name1} <= 0;
$toref->{references}{$name2}++;
}
}
@@ -3061,8 +3275,10 @@ sub initialize_chain_table($) {
$chainref = new_nat_chain( 'DOCKER' );
set_optflags( $chainref, DONT_OPTIMIZE | DONT_DELETE | DONT_MOVE );
add_commands( $chainref, '[ -f ${VARDIR}/.nat_DOCKER ] && cat ${VARDIR}/.nat_DOCKER >&3' );
$chainref = new_standard_chain( 'DOCKER-INGRESS' );
$chainref = new_standard_chain( 'DOCKER-ISOLATION' );
set_optflags( $chainref, DONT_OPTIMIZE | DONT_DELETE | DONT_MOVE );
add_commands( $chainref, '[ -f ${VARDIR}/.filter_DOCKER-INGRESS ] && cat ${VARDIR}/.filter_DOCKER-INGRESS >&3' );
add_commands( $chainref, '[ -f ${VARDIR}/.filter_DOCKER-ISOLATION ] && cat ${VARDIR}/.filter_DOCKER-ISOLATION >&3' );
}
@@ -3459,7 +3675,7 @@ sub optimize_level4( $$ ) {
#
delete_chain_and_references( $chainref );
$progress = 1;
} elsif ( $chainref->{builtin} || ! $globals{KLUDGEFREE} || $firstrule->{policy} ) {
} elsif ( $chainref->{builtin} || ! $globals{KLUDGEFREE} ) {
#
# This case requires a new rule merging algorithm. Ignore this chain from
# now on.
@@ -3686,12 +3902,21 @@ sub optimize_level8( $$$ ) {
}
$combined{ $chainref1->{name} } = $chainref->{name};
#
# While rare, it is possible for a policy chain to be combined with a non-policy chain. So we need to preserve
# the policy attributes in the combined chain
#
if ( $chainref->{policychain} ) {
@{$chainref1}{qw(policychain policy)} = @{$chainref}{qw(policychain policy)} unless $chainref1->{policychain};
} elsif ( $chainref1->{policychain} ) {
@{$chainref}{qw(policychain policy)} = @{$chainref1}{qw(policychain policy)} unless $chainref->{policychain};
}
}
}
}
if ( $progress ) {
my @rename = sort keys %rename;
my @rename = keys %rename;
#
# First create aliases for each renamed chain and change the {name} member.
#
@@ -4556,7 +4781,8 @@ sub do_proto( $$$;$ )
if ( $proto ne '' ) {
my $synonly = ( $proto =~ s/:syn$//i );
my $synonly = ( $proto =~ s/:(!)?syn$//i );
my $notsyn = $1;
my $invert = ( $proto =~ s/^!// ? '! ' : '' );
my $protonum = resolve_proto $proto;
@@ -4574,7 +4800,7 @@ sub do_proto( $$$;$ )
$output = "${invert}-p ${proto} ";
} else {
fatal_error '":syn" is only allowed with tcp' unless $proto == TCP && ! $invert;
$output = "-p $proto --syn ";
$output = $notsyn ? "-p $proto ! --syn " : "-p $proto --syn ";
}
fatal_error "SOURCE/DEST PORT(S) not allowed with PROTO !$pname" if $invert && ($ports ne '' || $sports ne '');
@@ -4611,7 +4837,7 @@ sub do_proto( $$$;$ )
$multiport = 1;
} else {
fatal_error "Missing DEST PORT" unless supplied $ports;
$ports = validate_portpair $pname , $ports;
$ports = validate_portpair $pname , $ports unless $ports =~ /^\$/;
$output .= ( $srcndst ? "-m multiport ${invert}--ports ${ports} " : "${invert}--dport ${ports} " );
}
}
@@ -4818,7 +5044,7 @@ sub do_iproto( $$$ )
$multiport = 1;
} else {
fatal_error "Missing DEST PORT" unless supplied $ports;
$ports = validate_portpair $pname , $ports;
$ports = validate_portpair $pname , $ports unless $ports =~ /^\$/;
if ( $srcndst ) {
push @output, multiport => "${invert}--ports ${ports}";
@@ -5757,6 +5983,7 @@ sub record_runtime_address( $$;$$ ) {
if ( $interface =~ /^{([a-zA-Z_]\w*)}$/ ) {
fatal_error "Mixed required/optional usage of address variable $1" if ( $address_variables{$1} || $addrtype ) ne $addrtype;
fatal_error "Variable %variable is already used as a port variable" if $port_variables{$1};
$address_variables{$1} = $addrtype;
return '$' . "$1 ";
}
@@ -6102,7 +6329,7 @@ sub match_dest_net( $;$ ) {
return '-d ' . record_runtime_address $1, $2;
}
$net = validate_net $net, 1;
$net = validate_net $net, 1 unless $net =~ /^\$/; # Don't validate if runtime address variable
$net eq ALLIP ? '' : "-d $net ";
}
@@ -6183,7 +6410,7 @@ sub imatch_dest_net( $;$ ) {
return ( d => record_runtime_address( $1, $2, 1 ) );
}
$net = validate_net $net, 1;
$net = validate_net $net, 1 unless $net =~ /^\$/; # Don't validate if runtime address variable
$net eq ALLIP ? () : ( d => $net );
}
@@ -6842,6 +7069,8 @@ sub interface_gateway( $ ) {
sub get_interface_gateway ( $;$$ ) {
my ( $logical, $protect, $provider ) = @_;
$provider = '' unless defined $provider;
my $interface = get_physical $logical;
my $variable = interface_gateway( $interface );
my $gateway = get_interface_option( $interface, 'gateway' );
@@ -6855,9 +7084,9 @@ sub get_interface_gateway ( $;$$ ) {
}
if ( interface_is_optional $logical ) {
$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface));
$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface $provider));
} else {
$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface)
$interfacegateways{$interface} = qq([ -n "\$$variable" ] || $variable=\$(detect_gateway $interface $provider)
[ -n "\$$variable" ] || startup_error "Unable to detect the gateway through interface $interface");
}
@@ -6980,13 +7209,13 @@ sub set_global_variables( $$ ) {
if ( $conditional ) {
my ( $interface, @interfaces );
@interfaces = sort keys %interfaceaddr;
@interfaces = keys %interfaceaddr;
for $interface ( @interfaces ) {
emit( qq([ -z "\$interface" -o "\$interface" = "$interface" ] && $interfaceaddr{$interface}) );
}
@interfaces = sort keys %interfacegateways;
@interfaces = keys %interfacegateways;
for $interface ( @interfaces ) {
emit( qq(if [ -z "\$interface" -o "\$interface" = "$interface" ]; then) );
@@ -6996,36 +7225,36 @@ sub set_global_variables( $$ ) {
emit( qq(fi\n) );
}
@interfaces = sort keys %interfacemacs;
@interfaces = keys %interfacemacs;
for $interface ( @interfaces ) {
emit( qq([ -z "\$interface" -o "\$interface" = "$interface" ] && $interfacemacs{$interface}) );
}
} else {
emit $_ for sort values %interfaceaddr;
emit "$_\n" for sort values %interfacegateways;
emit $_ for sort values %interfacemacs;
emit $_ for values %interfaceaddr;
emit "$_\n" for values %interfacegateways;
emit $_ for values %interfacemacs;
}
if ( $setall ) {
emit $_ for sort values %interfaceaddrs;
emit $_ for sort values %interfacenets;
emit $_ for values %interfaceaddrs;
emit $_ for values %interfacenets;
unless ( have_capability( 'ADDRTYPE' ) ) {
if ( $family == F_IPV4 ) {
emit 'ALL_BCASTS="$(get_all_bcasts) 255.255.255.255"';
emit $_ for sort values %interfacebcasts;
emit $_ for values %interfacebcasts;
} else {
emit 'ALL_ACASTS="$(get_all_acasts)"';
emit $_ for sort values %interfaceacasts;
emit $_ for values %interfaceacasts;
}
}
}
}
sub verify_address_variables() {
for my $variable ( sort keys %address_variables ) {
for my $variable ( keys %address_variables ) {
my $type = $address_variables{$variable};
my $address = "\$$variable";
@@ -7044,6 +7273,19 @@ sub verify_address_variables() {
qq( startup_error "Invalid value ($address) for address variable $variable"),
qq(fi\n) );
}
for my $variable( keys %port_variables ) {
my $port = "\$$variable";
my $type = $port_variables{$variable};
emit( qq(if [ -z "$port" ]; then) ,
qq( $variable=255) ,
qq(elif qt \$g_tool -A INPUT -p 6 --dport $port; then) ,
qq( qt \$g_tool -D INPUT -p 6 --dport $variable) ,
qq(else) ,
qq( startup_error "Invalid valid ($port) for port variable $variable") ,
qq(fi\n) );
}
}
#
@@ -7293,6 +7535,11 @@ sub isolate_dest_interface( $$$$ ) {
$rule .= "-d $variable ";
}
} elsif ( $dest =~ /^\$/ ) {
#
# Runtime address variable
#
$dnets = $dest;
} elsif ( $family == F_IPV4 ) {
if ( $dest =~ /^(.+?):(.+)$/ ) {
$diface = $1;
@@ -7942,7 +8189,7 @@ sub add_interface_options( $ ) {
#
# Generate a digest for each chain
#
for my $chainref ( sort { $a->{name} cmp $b->{name} } values %input_chains, values %forward_chains ) {
for my $chainref ( values %input_chains, values %forward_chains ) {
my $digest = '';
assert( $chainref );
@@ -7961,7 +8208,7 @@ sub add_interface_options( $ ) {
# Insert jumps to the interface chains into the rules chains
#
for my $zone1 ( off_firewall_zones ) {
my @input_interfaces = sort keys %{zone_interfaces( $zone1 )};
my @input_interfaces = keys %{zone_interfaces( $zone1 )};
my @forward_interfaces = @input_interfaces;
if ( @input_interfaces > 1 ) {
@@ -8047,7 +8294,7 @@ sub add_interface_options( $ ) {
for my $zone1 ( firewall_zone, vserver_zones ) {
for my $zone2 ( off_firewall_zones ) {
my $chainref = $filter_table->{rules_chain( $zone1, $zone2 )};
my @interfaces = sort keys %{zone_interfaces( $zone2 )};
my @interfaces = keys %{zone_interfaces( $zone2 )};
my $chain1ref;
for my $interface ( @interfaces ) {
@@ -8216,6 +8463,7 @@ sub save_docker_rules($) {
qq( $tool -t nat -S OUTPUT | tail -n +2 | fgrep DOCKER > \${VARDIR}/.nat_OUTPUT),
qq( $tool -t nat -S POSTROUTING | tail -n +2 | fgrep -v SHOREWALL > \${VARDIR}/.nat_POSTROUTING),
qq( $tool -t filter -S DOCKER | tail -n +2 > \${VARDIR}/.filter_DOCKER),
qq( [ -n "\$g_dockeringress" ] && $tool -t filter -S DOCKER-INGRESS | tail -n +2 > \${VARDIR}/.filter_DOCKER-INGRESS),
qq( [ -n "\$g_dockernetwork" ] && $tool -t filter -S DOCKER-ISOLATION | tail -n +2 > \${VARDIR}/.filter_DOCKER-ISOLATION)
);
@@ -8231,6 +8479,7 @@ sub save_docker_rules($) {
q( rm -f ${VARDIR}/.nat_OUTPUT),
q( rm -f ${VARDIR}/.nat_POSTROUTING),
q( rm -f ${VARDIR}/.filter_DOCKER),
q( rm -f ${VARDIR}/.filter_DOCKER-INGRESS),
q( rm -f ${VARDIR}/.filter_DOCKER-ISOLATION),
q( rm -f ${VARDIR}/.filter_FORWARD),
q(fi)
@@ -8453,7 +8702,7 @@ sub create_save_ipsets() {
#
$ipsets{$_} = 1 for ( @ipsets, @{$globals{SAVED_IPSETS}} );
my @sets = sort keys %ipsets;
my @sets = keys %ipsets;
emit( '' ,
' rm -f $file' ,
@@ -8629,7 +8878,7 @@ sub create_load_ipsets() {
#
sub create_nfobjects() {
my @objects = ( sort keys %nfobjects );
my @objects = ( keys %nfobjects );
if ( @objects ) {
if ( $config{NFACCT} ) {
@@ -8644,7 +8893,7 @@ sub create_nfobjects() {
}
}
for ( sort keys %nfobjects ) {
for ( keys %nfobjects ) {
emit( qq(if ! qt \$NFACCT get $_; then),
qq( \$NFACCT add $_),
qq(fi\n) );
@@ -8673,9 +8922,15 @@ sub create_netfilter_load( $ ) {
my $UTILITY = $family == F_IPV4 ? 'IPTABLES_RESTORE' : 'IP6TABLES_RESTORE';
emit( '',
'if [ "$COMMAND" = reload -a -n "$g_counters" ] && chain_exists $g_sha1sum1 && chain_exists $g_sha1sum2 ; then',
' option="--counters"',
'',
'if [ "$COMMAND" = reload -a -n "$g_counters" ] && chain_exists $g_sha1sum1 && chain_exists $g_sha1sum2 ; then' );
if ( have_capability( 'RESTORE_WAIT_OPTION' ) ) {
emit( ' option="--counters --wait "' . $config{MUTEX_TIMEOUT} );
} else {
emit( ' option="--counters"' );
}
emit( '',
' progress_message "Reusing existing ruleset..."',
'',
'else'
@@ -8683,7 +8938,11 @@ sub create_netfilter_load( $ ) {
push_indent;
emit 'option=';
if ( have_capability( 'RESTORE_WAIT_OPTION' ) ) {
emit 'option="--wait "' . $config{MUTEX_TIMEOUT};
} else {
emit 'option=';
}
save_progress_message "Preparing $utility input...";
@@ -8732,6 +8991,10 @@ sub create_netfilter_load( $ ) {
enter_cmd_mode;
emit( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
enter_cat_mode;
} elsif ( $name eq 'DOCKER-INGRESS' ) {
enter_cmd_mode;
emit( '[ -n "$g_dockeringress" ] && echo ":DOCKER-INGRESS - [0:0]" >&3' );
enter_cat_mode;
} else {
emit_unindented ":$name - [0:0]";
}
@@ -8836,6 +9099,11 @@ sub preview_netfilter_load() {
print( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
print "\n";
enter_cat_mode1;
} elsif ( $name eq 'DOCKER-INGRESS' ) {
enter_cmd_mode1 unless $mode == CMD_MODE;
print( '[ -n "$g_dockeringress" ] && echo ":DOCKER-INGRESS - [0:0]" >&3' );
print "\n";
enter_cat_mode1;
} else {
enter_cmd_mode1 unless $mode == CMD_MODE;
print( ":$name - [0:0]\n" );
@@ -9073,6 +9341,10 @@ sub create_stop_load( $ ) {
enter_cmd_mode;
emit( '[ -n "$g_dockernetwork" ] && echo ":DOCKER-ISOLATION - [0:0]" >&3' );
enter_cat_mode;
} elsif ( $name eq 'DOCKER-INGRESS' ) {
enter_cmd_mode;
emit( '[ -n "$g_dockeringress" ] && echo ":DOCKER-INGRESS - [0:0]" >&3' );
enter_cat_mode;
} else {
emit_unindented ":$name - [0:0]";
}
@@ -9098,7 +9370,11 @@ sub create_stop_load( $ ) {
enter_cmd_mode;
emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command=$' . $UTILITY );
if ( have_capability( 'RESTORE_WAIT_OPTION' ) ) {
emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command="$' . $UTILITY . ' --wait ' . $config{MUTEX_TIMEOUT} . '"' );
} else {
emit( '[ -n "$g_debug_iptables" ] && command=debug_restore_input || command=$' . $UTILITY );
}
emit( '',
'progress_message2 "Running $command..."',
@@ -9120,7 +9396,7 @@ sub initialize_switches() {
if ( keys %switches ) {
emit( 'if [ $COMMAND = start ]; then' );
push_indent;
for my $switch ( sort keys %switches ) {
for my $switch ( keys %switches ) {
my $setting = $switches{$switch};
my $file = "/proc/net/nf_condition/$switch";
emit "[ -f $file ] && echo $setting->{setting} > $file";

View File

@@ -93,11 +93,10 @@ sub generate_script_1( $ ) {
my $date = compiletime;
emit "#!$config{SHOREWALL_SHELL}\n#\n# Compiled firewall script generated by Shorewall $globals{VERSION} - $date\n#";
copy $globals{SHAREDIRPL} . '/lib.runtime', 0;
copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
}
copy $globals{SHAREDIRPL} . '/lib.runtime', 0;
copy2 $globals{SHAREDIRPL} . '/lib.common' , $debug;
}
my $lib = find_file 'lib.private';
@@ -110,7 +109,7 @@ sub generate_script_1( $ ) {
################################################################################
EOF
for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored/ ) {
for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored enabled disabled/ ) {
emit "\nrun_${exit}_exit() {";
push_indent;
append_file $exit or emit 'true';
@@ -210,6 +209,8 @@ sub generate_script_2() {
emit ( '[ -f ${g_confdir}/vardir ] && . ${g_confdir}/vardir' );
emit ( qq([ -n "\${VARDIR:=$shorewallrc1{VARDIR}}" ]) );
emit ( qq([ -n "\${VARLIB:=$shorewallrc1{VARLIB}}" ]) );
emit ( qq([ -n "\${CONFDIR:=$shorewallrc1{CONFDIR}}" ]) );
emit ( qq([ -n "\${SHAREDIR:=$shorewallrc1{SHAREDIR}}" ]) );
emit 'TEMPFILE=';
@@ -267,7 +268,8 @@ sub generate_script_2() {
emit( '',
'chain_exists DOCKER nat && chain_exists DOCKER && g_docker=Yes',
);
emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes]' );
emit( 'chain_exists DOCKER-INGRESS && g_dockeringress=Yes' );
emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes' );
emit( '' );
}
@@ -690,6 +692,7 @@ sub compiler {
set_timestamp( $timestamp );
set_debug( $debug , $confess );
#
# S H O R E W A L L R C ,
# S H O R E W A L L . C O N F A N D C A P A B I L I T I E S
#
get_configuration( $export , $update , $annotate , $inline );
@@ -794,13 +797,10 @@ sub compiler {
emit '}'; # End of setup_common_rules()
}
disable_script;
#
# R O U T I N G _ A N D _ T R A F F I C _ S H A P I N G
# (Writes the setup_routing_and_traffic_shaping() function to the compiled script)
#
enable_script;
#
# Validate the TC files so that the providers will know what interfaces have TC
#
my $tcinterfaces = process_tc;
@@ -945,7 +945,7 @@ sub compiler {
#
# Copy the footer to the script
#
copy $globals{SHAREDIRPL} . 'prog.footer' unless $test;
copy $globals{SHAREDIRPL} . 'prog.footer';
disable_script;
#

View File

@@ -36,11 +36,13 @@ use strict;
use warnings;
use File::Basename;
use File::Temp qw/ tempfile tempdir /;
use File::Glob ':globally';
use Cwd qw(abs_path getcwd);
use autouse 'Carp' => qw(longmess confess);
use Scalar::Util 'reftype';
use FindBin;
use Digest::SHA qw(sha1_hex);
use Errno qw(:POSIX);
our @ISA = qw(Exporter);
#
@@ -86,6 +88,9 @@ our @EXPORT = qw(
kernel_version
compiletime
F_IPV4
F_IPV6
);
our @EXPORT_OK = qw( $shorewall_dir initialize shorewall);
@@ -197,9 +202,6 @@ our %EXPORT_TAGS = ( internal => [ qw( create_temp_script
PARMSMODIFIED
USEDCALLER
F_IPV4
F_IPV6
TCP
UDP
UDPLITE
@@ -315,7 +317,7 @@ our %renamed = ( AUTO_COMMENT => 'AUTOCOMMENT', BLACKLIST_LOGLEVEL => 'BLACKLIST
#
# Config options and global settings that are to be copied to output script
#
our @propagateconfig = qw/ DISABLE_IPV6 MODULESDIR MODULE_SUFFIX LOAD_HELPERS_ONLY LOCKFILE SUBSYSLOCK LOG_VERBOSITY RESTART/;
our @propagateconfig = qw/ DISABLE_IPV6 MODULESDIR LOAD_HELPERS_ONLY LOCKFILE SUBSYSLOCK LOG_VERBOSITY RESTART/;
#
# From parsing the capabilities file or detecting capabilities
#
@@ -413,7 +415,9 @@ our %capdesc = ( NAT_ENABLED => 'NAT',
WAIT_OPTION => 'iptables --wait option',
CPU_FANOUT => 'NFQUEUE CPU Fanout',
NETMAP_TARGET => 'NETMAP Target',
NFLOG_SIZE => '--nflog-size support',
RESTORE_WAIT_OPTION
=> 'iptables-restore --wait option',
AMANDA_HELPER => 'Amanda Helper',
FTP_HELPER => 'FTP Helper',
FTP0_HELPER => 'FTP-0 Helper',
@@ -488,53 +492,55 @@ our %helpers_aliases;
our %helpers_enabled;
our %config_files = ( #accounting => 1,
actions => 1,
blacklist => 1,
clear => 1,
conntrack => 1,
ecn => 1,
findgw => 1,
hosts => 1,
init => 1,
initdone => 1,
actions => 1,
blacklist => 1,
clear => 1,
conntrack => 1,
ecn => 1,
findgw => 1,
hosts => 1,
init => 1,
initdone => 1,
interfaces => 1,
isusable => 1,
maclist => 1,
masq => 1,
nat => 1,
netmap => 1,
params => 1,
policy => 1,
providers => 1,
proxyarp => 1,
refresh => 1,
refreshed => 1,
restored => 1,
rawnat => 1,
isusable => 1,
maclist => 1,
mangle => 1,
masq => 1,
nat => 1,
netmap => 1,
params => 1,
policy => 1,
providers => 1,
proxyarp => 1,
refresh => 1,
refreshed => 1,
restored => 1,
rawnat => 1,
route_rules => 1,
routes => 1,
routes => 1,
routestopped => 1,
rtrules => 1,
rules => 1,
scfilter => 1,
secmarks => 1,
start => 1,
started => 1,
stop => 1,
stopped => 1,
rtrules => 1,
rules => 1,
scfilter => 1,
secmarks => 1,
snat => 1,
start => 1,
started => 1,
stop => 1,
stopped => 1,
stoppedrules => 1,
tcclasses => 1,
tcclear => 1,
tcdevices => 1,
tcfilters => 1,
tcclasses => 1,
tcclear => 1,
tcdevices => 1,
tcfilters => 1,
tcinterfaces => 1,
tcpri => 1,
tcrules => 1,
tos => 1,
tunnels => 1,
zones => 1 );
tcpri => 1,
tcrules => 1,
tos => 1,
tunnels => 1,
zones => 1 );
#
# Options that involve the the AUDIT target
# Options that involve the AUDIT target
#
our @auditoptions = qw( BLACKLIST_DISPOSITION MACLIST_DISPOSITION TCP_FLAGS_DISPOSITION );
#
@@ -644,6 +650,7 @@ our %eliminated = ( LOGRATE => 1,
HIGH_ROUTE_MARKS => 1,
BLACKLISTNEWONLY => 1,
CHAIN_SCRIPTS => 1,
MODULE_SUFFIX => 1,
);
#
# Variables involved in ?IF, ?ELSE ?ENDIF processing
@@ -748,8 +755,8 @@ sub initialize( $;$$) {
TC_SCRIPT => '',
EXPORT => 0,
KLUDGEFREE => '',
VERSION => "5.0.9-Beta2",
CAPVERSION => 50100 ,
VERSION => "5.1.8-Beta1",
CAPVERSION => 50106 ,
BLACKLIST_LOG_TAG => '',
RELATED_LOG_TAG => '',
MACLIST_LOG_TAG => '',
@@ -792,6 +799,7 @@ sub initialize( $;$$) {
INVALID_LOG_LEVEL => undef,
UNTRACKED_LOG_LEVEL => undef,
LOG_BACKEND => undef,
LOG_LEVEL => undef,
#
# Location of Files
#
@@ -816,6 +824,7 @@ sub initialize( $;$$) {
ACCEPT_DEFAULT => undef,
QUEUE_DEFAULT => undef,
NFQUEUE_DEFAULT => undef,
BLACKLIST_DEFAULT => undef,
#
# RSH/RCP Commands
#
@@ -842,7 +851,6 @@ sub initialize( $;$$) {
BLACKLIST => undef,
BLACKLISTNEWONLY => undef,
DELAYBLACKLISTLOAD => undef,
MODULE_SUFFIX => undef,
DISABLE_IPV6 => undef,
DYNAMIC_ZONES => undef,
PKTTYPE=> undef,
@@ -904,6 +912,9 @@ sub initialize( $;$$) {
VERBOSE_MESSAGES => undef ,
ZERO_MARKS => undef ,
FIREWALL => undef ,
BALANCE_PROVIDERS => undef ,
PERL_HASH_SEED => undef ,
USE_NFLOG_SIZE => undef ,
#
# Packet Disposition
#
@@ -999,7 +1010,7 @@ sub initialize( $;$$) {
CONNLIMIT_MATCH => undef,
TIME_MATCH => undef,
GOTO_TARGET => undef,
LOG_TARGET => 1, # Assume that we have it.
LOG_TARGET => undef,
ULOG_TARGET => undef,
NFLOG_TARGET => undef,
LOGMARK_TARGET => undef,
@@ -1037,6 +1048,8 @@ sub initialize( $;$$) {
WAIT_OPTION => undef,
CPU_FANOUT => undef,
NETMAP_TARGET => undef,
NFLOG_SIZE => undef,
RESTORE_WAIT_OPTION => undef,
AMANDA_HELPER => undef,
FTP_HELPER => undef,
@@ -1089,7 +1102,7 @@ sub initialize( $;$$) {
%compiler_params = ();
%actparams = ( 0 => 0, loglevel => '', logtag => '', chain => '', disposition => '', caller => '' );
%actparams = ( 0 => 0, loglevel => '', logtag => '', chain => '', disposition => '', caller => '', callfile => '', callline => '' );
$parmsmodified = 0;
$usedcaller = 0;
%ipsets = ();
@@ -1162,7 +1175,7 @@ sub initialize( $;$$) {
#
# Process the global shorewallrc file
#
# Note: The build file executes this function passing only the protocol family
# Note: The build script calls this function passing only the protocol family
#
process_shorewallrc( $shorewallrc,
$family == F_IPV4 ? 'shorewall' : 'shorewall6'
@@ -1213,10 +1226,9 @@ sub compiletime() {
# Create 'currentlineinfo'
#
sub currentlineinfo() {
my $linenumber = $currentlinenumber || 1;
if ( $currentfile ) {
my $lineinfo = " $currentfilename ";
if ( $currentfilename ) {
my $linenumber = $currentlinenumber || 1;
my $lineinfo = " $currentfilename ";
if ( $linenumber eq 'EOF' ) {
$lineinfo .= '(EOF)'
@@ -1982,6 +1994,7 @@ sub find_file($)
for my $directory ( @config_path ) {
my $file = "$directory$filename";
return $file if -f $file;
$!{ENOENT} || fatal_error "Unable to access $file: " . $!;
}
"$config_path[0]$filename";
@@ -2229,7 +2242,7 @@ sub split_list4( $ ) {
sub split_columns( $ ) {
my ($list) = @_;
return split ' ', $list unless $list =~ /\(/;
return split ' ', $list unless $list =~ /[()]/;
my @list1 = split ' ', $list;
my @list2;
@@ -2270,9 +2283,7 @@ sub split_columns( $ ) {
}
}
unless ( $opencount == 0 ) {
fatal_error "Mismatched parentheses ($list)";
}
fatal_error "Mismatched parentheses ($list)" unless $opencount == 0;
@list2;
}
@@ -2285,7 +2296,7 @@ sub clear_comment();
# ensure that it has an appropriate number of columns.
# supply '-' in omitted trailing columns.
# Handles all of the supported forms of column/pair specification
# Handles segragating raw iptables input in INLINE rules
# Handles segragating raw iptables input in rules
#
sub split_line2( $$;$$$ ) {
my ( $description, $columnsref, $nopad, $maxcolumns, $inline ) = @_;
@@ -2338,7 +2349,7 @@ sub split_line2( $$;$$$ ) {
$inline_matches = $pairs;
if ( $columns =~ /^(\s*|.*[^&@%]){(.*)}\s*$/ ) {
if ( $columns =~ /^(\s*|.*[^&@%])\{(.*)\}\s*$/ ) {
#
# Pairs are enclosed in curly brackets.
#
@@ -2354,7 +2365,7 @@ sub split_line2( $$;$$$ ) {
if ( $currline =~ /^\s*INLINE(?:\(.*\)(:.*)?|:.*)?\s/ || $currline =~ /^\s*IP6?TABLES(?:\(.*\)|:.*)?\s/ ) {
$inline_matches = $pairs;
if ( $columns =~ /^(\s*|.*[^&@%]){(.*)}\s*$/ ) {
if ( $columns =~ /^(\s*|.*[^&@%])\{(.*)\}\s*$/ ) {
#
# Pairs are enclosed in curly brackets.
#
@@ -2368,7 +2379,7 @@ sub split_line2( $$;$$$ ) {
} elsif ( $checkinline ) {
warning_message "This entry needs to be changed before INLINE_MATCHES can be set to Yes";
}
} elsif ( $currline =~ /^(\s*|.*[^&@%]){(.*)}$/ ) {
} elsif ( $currline =~ /^(\s*|.*[^&@%])\{(.*)\}$/ ) {
#
# Pairs are enclosed in curly brackets.
#
@@ -2434,12 +2445,12 @@ sub split_line2( $$;$$$ ) {
}
} else {
fatal_error "Unknown column ($1)" unless exists $columnsref->{$column};
$column = $columnsref->{$column};
fatal_error "Non-ASCII gunk in file" if $columns =~ /[^\s[:print:]]/;
$value = $1 if $value =~ /^"([^"]+)"$/;
$value =~ s/\\"/"/g;
fatal_error "Non-ASCII gunk in the value of the $column column" if $columns =~ /[^\s[:print:]]/;
$line[$column] = $value;
fatal_error "Non-ASCII gunk in the value of the $column column" if $value =~ /[^\s[:print:]]/;
my $colnum = $columnsref->{$column};
warning_message qq(Replacing "$line[$colnum]" with "$value" in the ) . uc( $column ) . ' column' if $line[$colnum] ne '-';
$line[$colnum] = $value;
}
}
}
@@ -2566,7 +2577,7 @@ sub open_file( $;$$$$ ) {
$max_format = supplied $mf ? $mf : 1;
$comments_allowed = supplied $ca ? $ca : 0;
$nocomment = $nc;
do_open_file $fname;;
do_open_file $fname;
} else {
$ifstack = @ifstack;
'';
@@ -2710,13 +2721,13 @@ sub directive_info( $$$$ ) {
# Add quotes to the passed value if the passed 'first part' has an odd number of quotes
# Return an expression that concatenates $first, $val and $rest
#
sub join_parts( $$$ ) {
my ( $first, $val, $rest ) = @_;
sub join_parts( $$$$ ) {
my ( $first, $val, $rest, $just_expand ) = @_;
$val = '' unless defined $val;
$val = "'$val'" unless ( $val =~ /^-?\d+$/ || # Value is numeric
( ( ( $first =~ tr/"/"/ ) & 1 ) || # There are an odd number of double quotes preceding the value
( ( $first =~ tr/'/'/ ) & 1 ) ) ); # There are an odd number of single quotes preceding the value
$val = "'$val'" unless $just_expand || ( $val =~ /^-?\d+$/ || # Value is numeric
( ( ( $first =~ tr/"/"/ ) & 1 ) || # There are an odd number of double quotes preceding the value
( ( $first =~ tr/'/'/ ) & 1 ) ) ); # There are an odd number of single quotes preceding the value
join( '', $first, $val, $rest );
}
@@ -2769,7 +2780,7 @@ sub evaluate_expression( $$$$ ) {
exists $capdesc{$var} ? have_capability( $var ) : '' );
}
$expression = join_parts( $first, $val, $rest );
$expression = join_parts( $first, $val, $rest, $just_expand );
directive_error( "Variable Expansion Loop" , $filename, $linenumber ) if ++$count > 100;
}
@@ -2779,8 +2790,8 @@ sub evaluate_expression( $$$$ ) {
my ( $first, $var, $rest ) = ( $1, $3, $4);
$var = numeric_value( $var ) if $var =~ /^\d/;
$val = $var ? $actparams{$var} : $chain;
$usedcaller = USEDCALLER if $var eq 'caller';
$expression = join_parts( $first, $val, $rest );
$usedcaller = USEDCALLER if $var =~ /^(?:caller|callfile|callline)$/;
$expression = join_parts( $first, $val, $rest , $just_expand );
directive_error( "Variable Expansion Loop" , $filename, $linenumber ) if ++$count > 100;
}
}
@@ -2815,7 +2826,6 @@ sub evaluate_expression( $$$$ ) {
#
# Not a simple one-term expression -- compile it
#
declare_passed unless $evals++;
$val = eval qq(package Shorewall::User;
@@ -2832,6 +2842,7 @@ sub evaluate_expression( $$$$ ) {
$val;
}
sub pop_open();
#
# Set callback
#
@@ -2839,6 +2850,40 @@ sub directive_callback( $ ) {
$directive_callback = shift;
}
sub directive_message( \&$$$$ ) {
my ( $functptr, $verbose, $expression, $filename, $linenumber ) = @_;
unless ( $omitting ) {
if ( $actparams{0} ) {
#
# When issuing a message from an action, report the action invocation
# site rather than the action file and line number.
#
# Avoid double-reporting by temporarily removing the invocation site
# from the open stack.
#
my $saveopens = pop @openstack;
$functptr->( $verbose ,
evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ),
$actparams{callfile} ,
$actparams{callline} );
push @openstack, $saveopens;
} else {
$functptr->( $verbose ,
evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ),
$filename ,
$linenumber );
}
}
}
#
# Each entry in @ifstack consists of a 4-tupple
#
@@ -2852,7 +2897,8 @@ sub process_compiler_directive( $$$$ ) {
print "CD===> $line\n" if $debug;
directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber ) unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+|WARNING!\s+|INFO!\s+)(.*)$/i;
directive_error( "Invalid compiler directive ($line)" , $filename, $linenumber )
unless $line =~ /^\s*\?(IF\s+|ELSE|ELSIF\s+|ENDIF|SET\s+|RESET\s+|FORMAT\s+|COMMENT\s*|ERROR\s+|WARNING\s+|INFO\s+|WARNING!\s+|INFO!\s+|REQUIRE\s+)(.*)$/i;
my ($keyword, $expression) = ( uc $1, $2 );
@@ -2954,15 +3000,16 @@ sub process_compiler_directive( $$$$ ) {
$var = $2 || 'chain';
directive_error( "Shorewall variables may only be RESET in the body of an action", $filename, $linenumber ) unless $actparams{0};
if ( exists $actparams{$var} ) {
if ( $var =~ /^loglevel|logtag|chain|disposition|caller$/ ) {
if ( $var =~ /^(?:loglevel|logtag|chain|disposition|caller|callfile|callline)$/ ) {
$actparams{$var} = '';
} else {
delete $actparams{$var}
}
$parmsmodified = PARMSMODIFIED if @ifstack > $ifstack;
} else {
directive_warning( 'Yes', "Shorewall variable $2 does not exist", $filename, $linenumber );
}
} else {
if ( exists $variables{$2} ) {
delete $variables{$2};
@@ -2992,52 +3039,87 @@ sub process_compiler_directive( $$$$ ) {
} ,
ERROR => sub() {
directive_error( evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ) ,
$filename ,
$linenumber ) unless $omitting;
unless ( $omitting ) {
if ( $actparams{0} ) {
close $currentfile;
#
# Avoid 'missing ?ENDIF' error in pop_open'
#
@ifstack = ();
#
# Avoid double-reporting the action invocation site
#
pop_open;
directive_error( evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ) ,
$actparams{callfile} ,
$actparams{callline} );
} else {
directive_error( evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ) ,
$filename ,
$linenumber ) unless $omitting;
}
}
} ,
WARNING => sub() {
directive_warning( $config{VERBOSE_MESSAGES} ,
evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ),
directive_message( &directive_warning ,
$config{VERBOSE_MESSAGES},
$expression ,
$filename ,
$linenumber ) unless $omitting;
$linenumber );
} ,
INFO => sub() {
directive_info( $config{VERBOSE_MESSAGES} ,
evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ),
$filename ,
$linenumber ) unless $omitting;
directive_message( &directive_info,
$config{VERBOSE_MESSAGES} ,
$expression ,
$filename ,
$linenumber );
} ,
'WARNING!' => sub() {
directive_warning( ! $config{VERBOSE_MESSAGES} ,
evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ),
directive_message( &directive_warning ,
! $config{VERBOSE_MESSAGES} ,
$expression ,
$filename ,
$linenumber ) unless $omitting;
$linenumber );
} ,
'INFO!' => sub() {
directive_info( ! $config{VERBOSE_MESSAGES} ,
evaluate_expression( $expression ,
$filename ,
$linenumber ,
1 ),
$filename ,
$linenumber ) unless $omitting;
directive_message( &directive_info ,
! $config{VERBOSE_MESSAGES} ,
$expression ,
$filename ,
$linenumber );
} ,
REQUIRE => sub() {
unless ( $omitting ) {
fatal_error "?REQUIRE may only be used within action files" unless $actparams{0};
fatal_error "Unknown capability ($expression)" unless ( my $capdesc = $capdesc{$expression} );
unless ( have_capability( $expression ) ) {
close $currentfile;
#
# Avoid 'missing ?ENDIF' error in pop_open'
#
@ifstack = ();
#
# Avoid double-reporting the action call site
#
pop_open;
directive_error( "The $actparams{action} action requires the $capdesc capability",
$actparams{callfile} ,
$actparams{callline} );
}
}
} ,
);
@@ -3538,6 +3620,8 @@ sub push_action_params( $$$$$$ ) {
$actparams{loglevel} = $loglevel;
$actparams{logtag} = $logtag;
$actparams{caller} = $caller;
$actparams{callfile} = $currentfilename;
$actparams{callline} = $currentlinenumber;
$actparams{disposition} = '' if $chainref->{action};
#
# The Shorewall variable '@chain' has non-word characters other than hyphen removed
@@ -3668,6 +3752,7 @@ sub expand_variables( \$ ) {
$usedcaller = USEDCALLER if $var eq 'caller';
} else {
fatal_error "Undefined shell variable (\$$var)" unless $config{IGNOREUNKNOWNVARIABLES} || exists $config{$var};
$val = $config{$var};
}
$val = '' unless defined $val;
@@ -3753,7 +3838,7 @@ sub read_a_line($) {
#
# Handle directives
#
if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR|WARNING|INFO)/i ) {
if ( /^\s*\?(?:IF|ELSE|ELSIF|ENDIF|SET|RESET|FORMAT|COMMENT|ERROR|WARNING|INFO|REQUIRE)/i ) {
$omitting = process_compiler_directive( $omitting, $_, $currentfilename, $. );
next;
}
@@ -3969,7 +4054,7 @@ sub make_mask( $ ) {
0xffffffff >> ( 32 - $_[0] );
}
my @suffixes = qw(group range threshold nlgroup cprange qthreshold);
my @suffixes;
#
# Validate a log level -- Drop the trailing '!' and translate to numeric value if appropriate"
@@ -4205,7 +4290,7 @@ sub which( $ ) {
# Load the kernel modules defined in the 'modules' file.
#
sub load_kernel_modules( ) {
my $moduleloader = which( 'modprobe' ) || ( which 'insmod' );
my $moduleloader = which( 'modprobe' ) || which( 'insmod' );
my $modulesdir = $config{MODULESDIR};
@@ -4238,25 +4323,20 @@ sub load_kernel_modules( ) {
close LSMOD;
$config{MODULE_SUFFIX} = 'o gz xz ko o.gz o.xz ko.gz ko.xz' unless $config{MODULE_SUFFIX};
my @suffixes = split /\s+/ , $config{MODULE_SUFFIX};
MODULE:
while ( read_a_line( NORMAL_READ ) ) {
fatal_error "Invalid modules file entry" unless ( $currentline =~ /^loadmodule\s+([a-zA-Z]\w*)\s*(.*)$/ );
my ( $module, $arguments ) = ( $1, $2 );
unless ( $loadedmodules{ $module } ) {
for my $directory ( @moduledirectories ) {
for my $suffix ( @suffixes ) {
my $modulefile = "$directory/$module.$suffix";
if ( -f $modulefile ) {
if ( $moduleloader eq 'insmod' ) {
system ("insmod $modulefile $arguments" );
} else {
system( "modprobe $module $arguments" );
}
if ( $moduleloader =~ /modprobe$/ ) {
system( "modprobe -q $module $arguments" );
$loadedmodules{ $module } = 1;
} else {
for my $directory ( @moduledirectories ) {
for my $modulefile ( <$directory/$module.*> ) {
system ("insmod $modulefile $arguments" );
$loadedmodules{ $module } = 1;
next MODULE;
}
}
}
@@ -4741,6 +4821,10 @@ sub NFLog_Target() {
qt1( "$iptables $iptablesw -A $sillyname -j NFLOG" );
}
sub NFLog_Size() {
have_capability( 'NFLOG_TARGET' ) && qt1( "$iptables $iptablesw -A $sillyname -j NFLOG --nflog-size 64" );
}
sub Logmark_Target() {
qt1( "$iptables $iptablesw -A $sillyname -j LOGMARK" );
}
@@ -4864,6 +4948,10 @@ sub Cpu_Fanout() {
have_capability( 'NFQUEUE_TARGET' ) && qt1( "$iptables -A $sillyname -j NFQUEUE --queue-balance 0:3 --queue-cpu-fanout" );
}
sub Restore_Wait_Option() {
length( `${iptables}-restore --wait < /dev/null 2>&1` ) == 0;
}
our %detect_capability =
( ACCOUNT_TARGET =>\&Account_Target,
AMANDA_HELPER => \&Amanda_Helper,
@@ -4916,6 +5004,7 @@ our %detect_capability =
LOG_TARGET => \&Log_Target,
ULOG_TARGET => \&Ulog_Target,
NFLOG_TARGET => \&NFLog_Target,
NFLOG_SIZE => \&NFLog_Size,
MANGLE_ENABLED => \&Mangle_Enabled,
MANGLE_FORWARD => \&Mangle_Forward,
MARK => \&Mark,
@@ -4943,6 +5032,7 @@ our %detect_capability =
REALM_MATCH => \&Realm_Match,
REAP_OPTION => \&Reap_Option,
RECENT_MATCH => \&Recent_Match,
RESTORE_WAIT_OPTION => \&Restore_Wait_Option,
RPFILTER_MATCH => \&RPFilter_Match,
SANE_HELPER => \&SANE_Helper,
SANE0_HELPER => \&SANE0_Helper,
@@ -5109,6 +5199,9 @@ sub determine_capabilities() {
$capabilities{TCPMSS_TARGET} = detect_capability( 'TCPMSS_TARGET' );
$capabilities{CPU_FANOUT} = detect_capability( 'CPU_FANOUT' );
$capabilities{NETMAP_TARGET} = detect_capability( 'NETMAP_TARGET' );
$capabilities{NFLOG_SIZE} = detect_capability( 'NFLOG_SIZE' );
$capabilities{RESTORE_WAIT_OPTION}
= detect_capability( 'RESTORE_WAIT_OPTION' );
unless ( have_capability 'CT_TARGET' ) {
$capabilities{HELPER_MATCH} = detect_capability 'HELPER_MATCH';
@@ -5279,11 +5372,24 @@ sub update_config_file( $ ) {
}
update_default( 'USE_DEFAULT_RT', 'No' );
update_default( 'EXPORTMODULES', 'No' );
update_default( 'RESTART', 'reload' );
update_default( 'PAGER', $shorewallrc1{DEFAULT_PAGER} );
update_default( 'LOGFORMAT', 'Shorewall:%s:%s:' );
update_default( 'LOGLIMIT', '' );
if ( $config{USE_DEFAULT_RT} eq '' || $config{USE_DEFAULT_RT} =~ /^no$/i ) {
update_default( 'BALANCE_PROVIDERS', 'No' );
} else {
update_default( 'BALANCE_PROVIDERS', 'Yes' );
}
update_default( 'EXPORTMODULES', 'No' );
update_default( 'RESTART', 'reload' );
update_default( 'PAGER', $shorewallrc1{DEFAULT_PAGER} );
update_default( 'LOGFORMAT', 'Shorewall:%s:%s:' );
update_default( 'LOGLIMIT', '' );
if ( $family == F_IPV4 ) {
update_default( 'BLACKLIST_DEFAULT', 'dropBcasts,dropNotSyn,dropInvalid' );
} else {
update_default( 'BLACKLIST_DEFAULT', 'AllowICMPs,dropBcasts,dropNotSyn,dropInvalid' );
}
my $fn;
@@ -5334,8 +5440,12 @@ sub update_config_file( $ ) {
}
}
$val = conditional_quote $val;
if ( supplied $val ) {
#
# Log LEVEL and DEFAULT settings often contain parens
#
$val = ($var =~ /(?:LEVEL|DEFAULT)$/) ? qq("$val") : conditional_quote $val;
}
$_ = "$var=$val\n";
}
@@ -5398,6 +5508,7 @@ EOF
sub process_shorewall_conf( $$ ) {
my ( $update, $annotate ) = @_;
my $file = find_file "$product.conf";
my @vars;
if ( -f $file ) {
$globals{CONFIGDIR} = $configfile = $file;
@@ -5411,7 +5522,7 @@ sub process_shorewall_conf( $$ ) {
# Don't expand shell variables or allow embedded scripting
#
while ( read_a_line( STRIP_COMMENTS | SUPPRESS_WHITESPACE | CHECK_GUNK ) ) {
if ( $currentline =~ /^\s*([a-zA-Z]\w*)=(.*?)\s*$/ ) {
if ( $currentline =~ /^\s*([a-zA-Z]\w*)=(.*)$/ ) {
my ($var, $val) = ($1, $2);
if ( exists $config{$var} ) {
@@ -5430,6 +5541,12 @@ sub process_shorewall_conf( $$ ) {
next;
}
if ( $update ) {
push @vars, $var;
} else {
expand_variables( $val ) unless $val =~ /^'.*'$/;
}
$config{$var} = ( $val =~ /\"([^\"]*)\"$/ ? $1 : $val );
warning_message "Option $var=$val is deprecated"
@@ -5450,14 +5567,19 @@ sub process_shorewall_conf( $$ ) {
#
# Now update the config file if asked
#
update_config_file( $annotate ) if $update;
#
# Config file update requires that the option values not have
# Shell variables expanded. We do that now.
#
for ( values %config ) {
if ( supplied $_ ) {
expand_variables( $_ ) unless /^'(.+)'$/;
if ( $update ) {
update_config_file( $annotate );
#
# Config file update requires that the option values not have
# Shell variables expanded. We do that now.
#
# To handle options like LOG_LEVEL, we process the options
# in the order in which they appear in the .conf file.
#
for ( @vars ) {
if ( supplied( my $val = $config{$_} ) ) {
expand_variables( $config{$_} ) unless $val =~ /^'.*'$/;
}
}
}
}
@@ -5946,7 +6068,6 @@ sub get_configuration( $$$$ ) {
#
# get_capabilities requires that the true settings of these options be established
#
default 'MODULE_PREFIX', 'ko ko.gz o o.gz gz';
default_yes_no 'LOAD_HELPERS_ONLY' , 'Yes';
if ( ! $export && $> == 0 ) {
@@ -6132,7 +6253,7 @@ sub get_configuration( $$$$ ) {
$config{LOG_VERBOSITY} = -1;
}
default_yes_no 'ADD_IP_ALIASES' , 'Yes';
default_yes_no 'ADD_IP_ALIASES' , $family == F_IPV4 ? 'Yes' : '';
default_yes_no 'ADD_SNAT_ALIASES' , '';
default_yes_no 'DETECT_DNAT_IPADDRS' , '';
default_yes_no 'DETECT_DNAT_IPADDRS' , '';
@@ -6286,6 +6407,18 @@ sub get_configuration( $$$$ ) {
default_yes_no 'RESTORE_DEFAULT_ROUTE' , 'Yes';
default_yes_no 'AUTOMAKE' , '';
default_yes_no 'TRACK_PROVIDERS' , '';
default_yes_no 'BALANCE_PROVIDERS' , $config{USE_DEFAULT_RT} ? 'Yes' : '';
default_yes_no 'USE_NFLOG_SIZE' , '';
if ( $config{USE_NFLOG_SIZE} ) {
if ( have_capability( 'NFLOG_SIZE' ) ) {
@suffixes = qw(group size threshold nlgroup cprange qthreshold);
} else {
fatal_error "USE_NFLOG_SIZE=Yes, but the --nflog-size capabiity is not present";
}
} else {
@suffixes = qw(group range threshold nlgroup cprange qthreshold);
}
unless ( ( $config{NULL_ROUTE_RFC1918} || '' ) =~ /^(?:blackhole|unreachable|prohibit)$/ ) {
default_yes_no( 'NULL_ROUTE_RFC1918', '' );
@@ -6302,6 +6435,8 @@ sub get_configuration( $$$$ ) {
$config{ACCOUNTING_TABLE} = 'filter';
}
my %variables = ( SW_DBL_IPSET => '', SW_DBL_TIMEOUT => 0 );
if ( supplied( $val = $config{DYNAMIC_BLACKLIST} ) ) {
if ( $val =~ /^ipset/ ) {
my %simple_options = ( 'src-dst' => 1, 'disconnect' => 1 );
@@ -6342,6 +6477,9 @@ sub get_configuration( $$$$ ) {
require_capability( 'IPSET_V5', 'DYNAMIC_BLACKLIST=ipset...', 's' );
$variables{SW_DBL_IPSET} = $set;
$variables{SW_DBL_TIMEOUT} = $globals{DBL_TIMEOUT};
} else {
default_yes_no( 'DYNAMIC_BLACKLIST', 'Yes' );
}
@@ -6349,6 +6487,8 @@ sub get_configuration( $$$$ ) {
default_yes_no( 'DYNAMIC_BLACKLIST', 'Yes' );
}
add_variables( %variables );
default_yes_no 'REQUIRE_INTERFACE' , '';
default_yes_no 'FORWARD_CLEAR_MARK' , have_capability( 'MARK' ) ? 'Yes' : '';
default_yes_no 'COMPLETE' , '';
@@ -6446,6 +6586,12 @@ sub get_configuration( $$$$ ) {
default_log_level 'INVALID_LOG_LEVEL', '';
default_log_level 'UNTRACKED_LOG_LEVEL', '';
if ( supplied( $val = $config{LOG_LEVEL} ) ) {
validate_level( $val );
} else {
$config{LOG_LEVEL} = 'info';
}
if ( supplied( $val = $config{LOG_BACKEND} ) ) {
if ( $family == F_IPV4 && $val eq 'ULOG' ) {
$val = 'ipt_ULOG';
@@ -6614,13 +6760,16 @@ sub get_configuration( $$$$ ) {
}
default 'RESTOREFILE' , 'restore';
default 'DROP_DEFAULT' , 'Drop';
default 'REJECT_DEFAULT' , 'Reject';
default 'DROP_DEFAULT' , 'none';
default 'REJECT_DEFAULT' , 'none';
default 'BLACKLIST_DEFAULT' , 'none';
default 'QUEUE_DEFAULT' , 'none';
default 'NFQUEUE_DEFAULT' , 'none';
default 'ACCEPT_DEFAULT' , 'none';
for my $default ( qw/DROP_DEFAULT REJECT_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT ACCEPT_DEFAULT/ ) {
for my $default ( qw/DROP_DEFAULT REJECT_DEFAULT BLACKLIST_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT ACCEPT_DEFAULT/ ) {
$config{$default} = 'none' if "\L$config{$default}" eq 'none';
}
@@ -6690,6 +6839,12 @@ sub get_configuration( $$$$ ) {
}
}
if ( supplied( $val = $config{MUTEX_TIMEOUT} ) ) {
fatal_error "Invalid value ($val) for MUTEX_TIMEOUT" unless $val && $val =~ /^\d+$/;
} else {
$config{MUTEX_TIMEOUT} = 60;
}
add_variables %config;
while ( my ($var, $val ) = each %renamed ) {

View File

@@ -63,7 +63,6 @@ our @EXPORT = ( qw( ALLIPv4
validate_host
validate_range
ip_range_explicit
expand_port_range
allipv4
allipv6
allip
@@ -74,10 +73,6 @@ our @EXPORT = ( qw( ALLIPv4
resolve_proto
resolve_dnsname
proto_name
validate_port
validate_portpair
validate_portpair1
validate_port_list
validate_icmp
validate_icmp6
) );
@@ -389,6 +384,8 @@ sub resolve_proto( $ ) {
my $proto = $_[0];
my $number;
$proto =~ s/:.*//;
if ( $proto =~ /^\d+$/ || $proto =~ /^0x/ ) {
$number = numeric_value ( $proto );
defined $number && $number <= 255 ? $number : undef;
@@ -409,114 +406,6 @@ sub proto_name( $ ) {
$proto =~ /^(\d+)$/ ? $prototoname[ $proto ] || scalar getprotobynumber $proto : $proto
}
sub validate_port( $$ ) {
my ($proto, $port) = @_;
my $value;
if ( $port =~ /^(\d+)$/ || $port =~ /^0x/ ) {
$port = numeric_value $port;
return $port if defined $port && $port && $port <= 65535;
} else {
$proto = proto_name $proto if $proto =~ /^(\d+)$/;
$value = getservbyname( $port, $proto );
}
return $value if defined $value;
fatal_error "The separator for a port range is ':', not '-' ($port)" if $port =~ /^\d+-\d+$/;
fatal_error "Invalid/Unknown $proto port/service ($_[1])" unless defined $value;
}
sub validate_portpair( $$ ) {
my ($proto, $portpair) = @_;
my $what;
my $pair = $portpair;
#
# Accept '-' as a port-range separator
#
$pair =~ tr/-/:/ if $pair =~ /^[-0-9]+$/;
fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
$pair = "0$pair" if substr( $pair, 0, 1 ) eq ':';
$pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
my @ports = split /:/, $pair, 2;
my $protonum = resolve_proto( $proto ) || 0;
$_ = validate_port( $protonum, $_) for grep $_, @ports;
if ( @ports == 2 ) {
$what = 'port range';
fatal_error "Invalid port range ($portpair)" unless $ports[0] < $ports[1];
} else {
$what = 'port';
}
fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, UDPLITE, SCTP or DCCP" unless
defined $protonum && ( $protonum == TCP ||
$protonum == UDP ||
$protonum == UDPLITE ||
$protonum == SCTP ||
$protonum == DCCP );
join ':', @ports;
}
sub validate_portpair1( $$ ) {
my ($proto, $portpair) = @_;
my $what;
fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/-/-/ > 1;
$portpair = "1$portpair" if substr( $portpair, 0, 1 ) eq ':';
$portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
my @ports = split /-/, $portpair, 2;
my $protonum = resolve_proto( $proto ) || 0;
$_ = validate_port( $protonum, $_) for grep $_, @ports;
if ( @ports == 2 ) {
$what = 'port range';
fatal_error "Invalid port range ($portpair)" unless $ports[0] && $ports[0] < $ports[1];
} else {
$what = 'port';
fatal_error 'Invalid port number (0)' unless $portpair;
}
fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, SCTP or DCCP" unless
defined $protonum && ( $protonum == TCP ||
$protonum == UDP ||
$protonum == SCTP ||
$protonum == DCCP );
join '-', @ports;
}
sub validate_port_list( $$ ) {
my $result = '';
my ( $proto, $list ) = @_;
my @list = split_list( $list, 'port' );
if ( @list > 1 && $list =~ /[:-]/ ) {
require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
}
$proto = proto_name $proto;
for ( @list ) {
my $value = validate_portpair( $proto , $_ );
$result = $result ? join ',', $result, $value : $value;
}
$result;
}
my %icmp_types = ( any => 'any',
'echo-reply' => 0,
'destination-unreachable' => 3,
@@ -570,67 +459,6 @@ sub validate_icmp( $ ) {
fatal_error "Invalid ICMP Type ($type)"
}
#
# Expands a port range into a minimal list of ( port, mask ) pairs.
# Each port and mask are expressed as 4 hex nibbles without a leading '0x'.
#
# Example:
#
# DB<3> @foo = Shorewall::IPAddrs::expand_port_range( 6, '110:' ); print "@foo\n"
# 006e fffe 0070 fff0 0080 ff80 0100 ff00 0200 fe00 0400 fc00 0800 f800 1000 f000 2000 e000 4000 c000 8000 8000
#
sub expand_port_range( $$ ) {
my ( $proto, $range ) = @_;
if ( $range =~ /^(.*):(.*)$/ ) {
my ( $first, $last ) = ( $1, $2);
my @result;
fatal_error "Invalid port range ($range)" unless $first ne '' or $last ne '';
#
# Supply missing first/last port number
#
$first = 0 if $first eq '';
$last = 65535 if $last eq '';
#
# Validate the ports
#
( $first , $last ) = ( validate_port( $proto, $first || 1 ) , validate_port( $proto, $last ) );
$last++; #Increment last address for limit testing.
#
# Break the range into groups:
#
# - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
# - Otherwise, find the largest power of two P that divides the first address such that
# the remaining range has less than or equal to P ports. The next group is
# ( <first> , ~( P-1 ) ).
#
while ( ( my $ports = ( $last - $first ) ) > 0 ) {
my $mask = 0xffff; #Mask for current ports in group.
my $y = 2; #Next power of two to test
my $z = 1; #Number of ports in current group (Previous value of $y).
while ( ( ! ( $first % $y ) ) && ( $y <= $ports ) ) {
$mask <<= 1;
$z = $y;
$y <<= 1;
}
#
#
push @result, sprintf( '%04x', $first ) , sprintf( '%04x' , $mask & 0xffff );
$first += $z;
}
fatal_error "Invalid port range ($range)" unless @result; # first port > last port
@result;
} else {
( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
}
}
sub valid_6address( $ ) {
my $address = $_[0];

View File

@@ -127,7 +127,7 @@ sub setup_ecn()
}
if ( @hosts ) {
my @interfaces = ( sort { interface_number($a) <=> interface_number($b) } keys %interfaces );
my @interfaces = ( keys %interfaces );
progress_message "$doing ECN control on @interfaces...";
@@ -667,6 +667,7 @@ sub create_docker_rules() {
my $chainref = $filter_table->{FORWARD};
add_commands( $chainref, '[ -n "$g_dockeringress" ] && echo "-A FORWARD -j DOCKER-INGRESS" >&3', );
add_commands( $chainref, '[ -n "$g_dockernetwork" ] && echo "-A FORWARD -j DOCKER-ISOLATION" >&3', );
if ( my $dockerref = known_interface('docker0') ) {
@@ -1213,55 +1214,53 @@ sub add_common_rules ( $ ) {
}
}
if ( $family == F_IPV4 ) {
my $announced = 0;
my $announced = 0;
$list = find_interfaces_by_option 'upnp';
$list = find_interfaces_by_option 'upnp';
if ( @$list ) {
progress_message2 "$doing UPnP";
if ( @$list ) {
progress_message2 "$doing UPnP";
$chainref = set_optflags( new_nat_chain( 'UPnP' ), DONT_OPTIMIZE );
$chainref = set_optflags( new_nat_chain( 'UPnP' ), DONT_OPTIMIZE );
add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
add_commands( $chainref, '[ -s /${VARDIR}/.UPnP ] && cat ${VARDIR}/.UPnP >&3' );
my $chainref1;
my $chainref1;
if ( $config{MINIUPNPD} ) {
$chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE );
add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
}
$announced = 1;
for $interface ( @$list ) {
add_ijump_extended $nat_table->{PREROUTING} , j => 'UPnP', get_interface_origin($interface), imatch_source_dev ( $interface );
add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD} , imatch_dest_dev ( $interface ) if $chainref1;
}
if ( $config{MINIUPNPD} ) {
$chainref1 = set_optflags( new_nat_chain( 'MINIUPNPD-POSTROUTING' ), DONT_OPTIMIZE );
add_commands( $chainref, '[ -s /${VARDIR}/.MINIUPNPD-POSTROUTING ] && cat ${VARDIR}/.MINIUPNPD-POSTROUTING >&3' );
}
$list = find_interfaces_by_option 'upnpclient';
$announced = 1;
if ( @$list ) {
progress_message2 "$doing UPnP" unless $announced;
for $interface ( @$list ) {
add_ijump_extended $nat_table->{PREROUTING} , j => 'UPnP', get_interface_origin($interface), imatch_source_dev ( $interface );
add_ijump_extended $nat_table->{$globals{POSTROUTING}} , j => 'MINIUPNPD-POSTROUTING' , $origin{MINIUPNPD} , imatch_dest_dev ( $interface ) if $chainref1;
}
}
for $interface ( @$list ) {
my $chainref = $filter_table->{input_option_chain $interface};
my $base = uc var_base get_physical $interface;
my $optional = interface_is_optional( $interface );
my $variable = get_interface_gateway( $interface, ! $optional );
my $origin = get_interface_origin( $interface );
$list = find_interfaces_by_option 'upnpclient';
if ( $optional ) {
add_commands( $chainref,
qq(if [ -n "SW_\$${base}_IS_USABLE" -a -n "$variable" ]; then) );
incr_cmd_level( $chainref );
add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
decr_cmd_level( $chainref );
add_commands( $chainref, 'fi' );
} else {
add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
}
if ( @$list ) {
progress_message2 "$doing UPnP" unless $announced;
for $interface ( @$list ) {
my $chainref = $filter_table->{input_option_chain $interface};
my $base = uc var_base get_physical $interface;
my $optional = interface_is_optional( $interface );
my $variable = get_interface_gateway( $interface, ! $optional );
my $origin = get_interface_origin( $interface );
if ( $optional ) {
add_commands( $chainref,
qq(if [ -n "SW_\$${base}_IS_USABLE" -a -n "$variable" ]; then) );
incr_cmd_level( $chainref );
add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
decr_cmd_level( $chainref );
add_commands( $chainref, 'fi' );
} else {
add_ijump_extended( $chainref, j => 'ACCEPT', $origin, imatch_source_dev( $interface ), s => $variable, p => 'udp' );
}
}
}
@@ -1297,7 +1296,7 @@ sub setup_mac_lists( $ ) {
$maclist_interfaces{ $hostref->[0] } = 1;
}
my @maclist_interfaces = ( sort keys %maclist_interfaces );
my @maclist_interfaces = ( keys %maclist_interfaces );
if ( $phase == 1 ) {
@@ -1618,7 +1617,7 @@ sub handle_loopback_traffic() {
# Handle conntrack rules
#
if ( $notrackref->{referenced} ) {
for my $hostref ( sort { $a->{type} cmp $b->{type} } @{defined_zone( $z1 )->{hosts}{ip}{'%vserver%'}} ) {
for my $hostref ( @{defined_zone( $z1 )->{hosts}{ip}{'%vserver%'}} ) {
my $exclusion = source_exclusion( $hostref->{exclusions}, $notrackref);
my @ipsec_match = match_ipsec_in $z1 , $hostref;
@@ -1639,8 +1638,8 @@ sub handle_loopback_traffic() {
#
my $source_hosts_ref = defined_zone( $z1 )->{hosts};
for my $typeref ( sort { $a->{type} cmp $b->{type} } values %{$source_hosts_ref} ) {
for my $hostref ( sort { $a->{type} cmp $b->{type} } @{$typeref->{'%vserver%'}} ) {
for my $typeref ( values %{$source_hosts_ref} ) {
for my $hostref ( @{$typeref->{'%vserver%'}} ) {
my $exclusion = source_exclusion( $hostref->{exclusions}, $natref);
for my $net ( @{$hostref->{hosts}} ) {
@@ -1662,7 +1661,7 @@ sub add_interface_jumps {
our %input_jump_added;
our %output_jump_added;
our %forward_jump_added;
my @interfaces = sort grep $_ ne '%vserver%', @_;
my @interfaces = grep $_ ne '%vserver%', @_;
my $dummy;
my $lo_jump_added = interface_zone( loopback_interface ) && ! get_interface_option( loopback_interface, 'destonly' );
#
@@ -1776,7 +1775,7 @@ sub handle_complex_zone( $$ ) {
my $type = $zoneref->{type};
my $source_ref = ( $zoneref->{hosts}{ipsec} ) || {};
for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$source_ref ) {
for my $interface ( keys %$source_ref ) {
my $sourcechainref = $filter_table->{forward_chain $interface};
my @interfacematch;
my $interfaceref = find_interface $interface;
@@ -2288,9 +2287,9 @@ sub generate_matrix() {
#
# Take care of PREROUTING, INPUT and OUTPUT jumps
#
for my $type ( sort keys %$source_hosts_ref ) {
for my $type ( keys %$source_hosts_ref ) {
my $typeref = $source_hosts_ref->{$type};
for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$typeref ) {
for my $interface ( keys %$typeref ) {
if ( get_physical( $interface ) eq '+' ) {
#
# Insert the interface-specific jumps before this one which is not interface-specific
@@ -2375,9 +2374,9 @@ sub generate_matrix() {
my $chainref = $filter_table->{$chain}; #Will be null if $chain is a Netfilter Built-in target like ACCEPT
for my $type ( sort keys %{$zone1ref->{hosts}} ) {
for my $type ( keys %{$zone1ref->{hosts}} ) {
my $typeref = $zone1ref->{hosts}{$type};
for my $interface ( sort { interface_number( $a ) <=> interface_number( $b ) } keys %$typeref ) {
for my $interface ( keys %$typeref ) {
for my $hostref ( @{$typeref->{$interface}} ) {
next if $hostref->{options}{sourceonly};
if ( $zone ne $zone1 || $num_ifaces > 1 || $hostref->{options}{routeback} ) {

View File

@@ -941,7 +941,17 @@ sub handle_nat_rule( $$$$$$$$$$$$$ ) {
} else {
$server = $1 if $family == F_IPV6 && $server =~ /^\[(.+)\]$/;
fatal_error "Invalid server IP address ($server)" if $server eq ALLIP || $server eq NILIP;
my @servers = validate_address $server, 1;
my @servers;
if ( ( $server =~ /^([&%])(.+)/ ) ) {
$server = record_runtime_address( $1, $2 );
$server =~ s/ $//;
@servers = ( $server );
} else {
@servers = validate_address $server, 1;
}
$server = join ',', @servers;
}

View File

@@ -64,6 +64,8 @@ our @load_interfaces;
our $balancing;
our $fallback;
our $balanced_providers;
our $fallback_providers;
our $metrics;
our $first_default_route;
our $first_fallback_route;
@@ -99,6 +101,8 @@ sub initialize( $ ) {
%provider_interfaces = ();
@load_interfaces = ();
$balancing = 0;
$balanced_providers = 0;
$fallback_providers = 0;
$fallback = 0;
$metrics = 0;
$first_default_route = 1;
@@ -323,7 +327,13 @@ sub balance_default_route( $$$$ ) {
emit '';
if ( $first_default_route ) {
if ( $gateway ) {
if ( $balanced_providers == 1 ) {
if ( $gateway ) {
emit "DEFAULT_ROUTE=\"via $gateway dev $interface $realm\"";
} else {
emit "DEFAULT_ROUTE=\"dev $interface $realm\"";
}
} elsif ( $gateway ) {
emit "DEFAULT_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
} else {
emit "DEFAULT_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
@@ -347,7 +357,13 @@ sub balance_fallback_route( $$$$ ) {
emit '';
if ( $first_fallback_route ) {
if ( $gateway ) {
if ( $fallback_providers == 1 ) {
if ( $gateway ) {
emit "FALLBACK_ROUTE=\"via $gateway dev $interface $realm\"";
} else {
emit "FALLBACK_ROUTE=\"dev $interface $realm\"";
}
} elsif ( $gateway ) {
emit "FALLBACK_ROUTE=\"nexthop via $gateway dev $interface weight $weight $realm\"";
} else {
emit "FALLBACK_ROUTE=\"nexthop dev $interface weight $weight $realm\"";
@@ -486,7 +502,7 @@ sub process_a_provider( $ ) {
if ( ( $gw = lc $gateway ) eq 'detect' ) {
fatal_error "Configuring multiple providers through one interface requires an explicit gateway" if $shared;
$gateway = get_interface_gateway( $interface, undef, 1 );
$gateway = get_interface_gateway( $interface, undef, $number );
$gatewaycase = 'detect';
set_interface_option( $interface, 'gateway', 'detect' );
} elsif ( $gw eq 'none' ) {
@@ -519,11 +535,11 @@ sub process_a_provider( $ ) {
my ( $loose, $track, $balance, $default, $default_balance, $optional, $mtu, $tproxy, $local, $load, $what, $hostroute, $persistent );
if ( $pseudo ) {
( $loose, $track, $balance , $default, $default_balance, $optional, $mtu, $tproxy , $local, $load, $what , $hostroute, $persistent ) =
( 0, 0 , 0 , 0, 0, 1 , '' , 0 , 0, 0, 'interface', 0, 0);
( $loose, $track, $balance , $default, $default_balance, $optional, $mtu, $tproxy , $local, $load, $what , $hostroute, $persistent ) =
( 0, 0 , 0 , 0, 0, 1 , '' , 0 , 0, 0, 'interface', 0, 0);
} else {
( $loose, $track, $balance , $default, $default_balance, $optional, $mtu, $tproxy , $local, $load, $what , $hostroute, $persistent )=
( 0, $config{TRACK_PROVIDERS}, 0 , 0, $config{USE_DEFAULT_RT} ? 1 : 0, interface_is_optional( $interface ), '' , 0 , 0, 0, 'provider', 1, 0);
( $loose, $track, $balance , $default, $default_balance, $optional, $mtu, $tproxy , $local, $load, $what , $hostroute, $persistent )=
( 0, $config{TRACK_PROVIDERS}, 0 , 0, $config{BALANCE_PROVIDERS} ? 1 : 0, interface_is_optional( $interface ), '' , 0 , 0, 0, 'provider', 1, 0);
}
unless ( $options eq '-' ) {
@@ -586,6 +602,7 @@ sub process_a_provider( $ ) {
} elsif ( $option eq 'nohostroute' ) {
$hostroute = 0;
} elsif ( $option eq 'persistent' ) {
warning_message "When RESTORE_DEFAULT_ROUTE=Yes, the 'persistent' option may not work as expected" if $config{RESTORE_DEFAULT_ROUTE};
$persistent = 1;
} else {
fatal_error "Invalid option ($option)";
@@ -593,7 +610,12 @@ sub process_a_provider( $ ) {
}
}
fatal_error q(The 'balance' and 'fallback' options are mutually exclusive) if $balance && $default;
if ( $balance ) {
fatal_error q(The 'balance' and 'fallback' options are mutually exclusive) if $default;
$balanced_providers++;
} elsif ( $default ) {
$fallback_providers++;
}
if ( $load ) {
fatal_error q(The 'balance=<weight>' and 'load=<load-factor>' options are mutually exclusive) if $balance > 1;
@@ -603,19 +625,37 @@ sub process_a_provider( $ ) {
fatal_error "A provider interface must have at least one associated zone" unless $tproxy || %{interface_zones($interface)};
if ( $local ) {
fatal_error "GATEWAY not valid with 'local' provider" unless $gatewaycase eq 'omitted';
fatal_error "'track' not valid with 'local'" if $track;
fatal_error "DUPLICATE not valid with 'local'" if $duplicate ne '-';
fatal_error "'persistent' is not valid with 'local" if $persistent;
} elsif ( $tproxy ) {
fatal_error "Only one 'tproxy' provider is allowed" if $tproxies++;
fatal_error "GATEWAY not valid with 'tproxy' provider" unless $gatewaycase eq 'omitted';
fatal_error "'track' not valid with 'tproxy'" if $track;
fatal_error "DUPLICATE not valid with 'tproxy'" if $duplicate ne '-';
fatal_error "MARK not allowed with 'tproxy'" if $mark ne '-';
fatal_error "'persistent' is not valid with 'tproxy" if $persistent;
$mark = $globals{TPROXY_MARK};
unless ( $pseudo ) {
if ( $local ) {
fatal_error "GATEWAY not valid with 'local' provider" unless $gatewaycase eq 'omitted';
fatal_error "'track' not valid with 'local'" if $track;
fatal_error "DUPLICATE not valid with 'local'" if $duplicate ne '-';
fatal_error "'persistent' is not valid with 'local" if $persistent;
} elsif ( $tproxy ) {
fatal_error "Only one 'tproxy' provider is allowed" if $tproxies++;
fatal_error "GATEWAY not valid with 'tproxy' provider" unless $gatewaycase eq 'omitted';
fatal_error "'track' not valid with 'tproxy'" if $track;
fatal_error "DUPLICATE not valid with 'tproxy'" if $duplicate ne '-';
fatal_error "MARK not allowed with 'tproxy'" if $mark ne '-';
fatal_error "'persistent' is not valid with 'tproxy" if $persistent;
$mark = $globals{TPROXY_MARK};
} elsif ( ( my $rf = ( $config{ROUTE_FILTER} eq 'on' ) ) || $interfaceref->{options}{routefilter} ) {
if ( $config{USE_DEFAULT_RT} ) {
if ( $rf ) {
fatal_error "There may be no providers when ROUTE_FILTER=Yes and USE_DEFAULT_RT=Yes";
} else {
fatal_error "Providers interfaces may not specify 'routefilter' when USE_DEFAULT_RT=Yes";
}
} else {
unless ( $balance ) {
if ( $rf ) {
fatal_error "The 'balance' option is required when ROUTE_FILTER=Yes";
} else {
fatal_error "Provider interfaces may not specify 'routefilter' without 'balance' or 'primary'";
}
}
}
}
}
my $val = 0;
@@ -808,7 +848,7 @@ sub add_a_provider( $$ ) {
if ( $tproxy ) {
emit 'run_ip route add local ' . ALLIP . " dev $physical table $id";
} else {
emit "run_ip route add default dev $physical table $id";
emit "run_ip route replace default dev $physical table $id";
}
}
@@ -824,7 +864,7 @@ sub add_a_provider( $$ ) {
emit qq(echo "\$IP route del $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
}
emit( "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm" );
emit( "run_ip route replace default via $gateway src $address dev $physical ${mtu}table $id $realm" );
emit( qq( echo "\$IP route del default via $gateway src $address dev $physical ${mtu}table $id $realm > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing) );
}
@@ -834,9 +874,9 @@ sub add_a_provider( $$ ) {
emit( "run_ip rule add from $address pref 20000 table $id" ,
"echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
} else {
emit ( "find_interface_addresses $physical | while read address; do" );
emit ( " qt \$IP -$family rule del from \$address" );
emit ( " run_ip rule add from \$address pref 20000 table $id",
emit ( "find_interface_addresses $physical | while read address; do",
" qt \$IP -$family rule del from \$address",
" run_ip rule add from \$address pref 20000 table $id",
" echo \"\$IP -$family rule del from \$address pref 20000 > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing",
' rulenum=$(($rulenum + 1))',
'done'
@@ -859,7 +899,6 @@ sub add_a_provider( $$ ) {
emit( qq(fi\n),
qq(echo 1 > \${VARDIR}/${physical}_disabled) );
pop_indent;
emit( "}\n" );
@@ -885,7 +924,7 @@ sub add_a_provider( $$ ) {
if ( $tproxy ) {
emit 'run_ip route add local ' . ALLIP . " dev $physical table $id";
} else {
emit "run_ip route add default dev $physical table $id";
emit "run_ip route replace default dev $physical table $id";
}
}
}
@@ -917,7 +956,7 @@ CEOF
my $hexmark = in_hex( $mark );
my $mask = have_capability( 'FWMARK_RT_MASK' ) ? '/' . in_hex( $globals{ $tproxy && ! $local ? 'TPROXY_MARK' : 'PROVIDER_MASK' } ) : '';
emit ( "qt \$IP -$family rule del fwmark ${hexmark}${mask}" ) if $config{DELETE_THEN_ADD};
emit ( "qt \$IP -$family rule del fwmark ${hexmark}${mask}" ) if $persistent || $config{DELETE_THEN_ADD};
emit ( "run_ip rule add fwmark ${hexmark}${mask} pref $pref table $id",
"echo \"\$IP -$family rule del fwmark ${hexmark}${mask} > /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing"
@@ -946,7 +985,7 @@ CEOF
emit qq(run_ip route replace $gateway src $address dev $physical ${mtu}table $id $realm);
}
emit "run_ip route add default via $gateway src $address dev $physical ${mtu}table $id $realm";
emit "run_ip route replace default via $gateway src $address dev $physical ${mtu}table $id $realm";
}
if ( $balance ) {
@@ -958,14 +997,16 @@ CEOF
emit '';
if ( $gateway ) {
emit qq(run_ip route replace $gateway/32 dev $physical table $id) if $hostroute;
emit qq(run_ip route add default via $gateway src $address dev $physical table $id metric $number);
emit qq(run_ip route replace default via $gateway src $address dev $physical table $id metric $number);
emit qq(echo "\$IP -$family route del default via $gateway table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
emit qq(echo "\$IP -4 route del $gateway/32 dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing) if $family == F_IPV4;
} else {
emit qq(run_ip route add default table $id dev $physical metric $number);
emit qq(run_ip route replace default table $id dev $physical metric $number);
emit qq(echo "\$IP -$family route del default dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing);
}
emit( 'g_fallback=Yes' ) if $persistent;
$metrics = 1;
}
@@ -987,12 +1028,13 @@ CEOF
} elsif ( ! $noautosrc ) {
if ( $shared ) {
if ( $persistent ) {
emit( qq(if ! egrep -q "^2000:[[:space:]]+from $address lookup $id"; then),
emit( qq(if ! egrep -q "^20000:[[:space:]]+from $address lookup $id"; then),
qq( qt \$IP -$family rule del from $address pref 20000),
qq( run_ip rule add from $address pref 20000 table $id),
qq( echo "\$IP -$family rule del from $address pref 20000> /dev/null 2>&1" >> \${VARDIR}/undo_${table}_routing ),
qq(fi) );
} else {
emit "qt \$IP -$family rule del from $address" if $config{DELETE_THEN_ADD};
emit "qt \$IP -$family rule del from $address" if $persistent || $config{DELETE_THEN_ADD};
emit( "run_ip rule add from $address pref 20000 table $id" ,
"echo \"\$IP -$family rule del from $address pref 20000> /dev/null 2>&1\" >> \${VARDIR}/undo_${table}_routing" );
}
@@ -1049,7 +1091,21 @@ CEOF
emit( "setup_${dev}_tc" ) if $tcdevices->{$interface};
}
emit( qq(rm -f \${VARDIR}/${physical}_disabled) );
emit( qq(rm -f \${VARDIR}/${physical}_disabled),
$pseudo ? "run_enabled_exit ${physical} ${interface}" : "run_enabled_exit ${physical} ${interface} ${table}"
);
if ( ! $pseudo && $config{USE_DEFAULT_RT} && $config{RESTORE_DEFAULT_ROUTE} ) {
emit ( '#',
'# We now have a viable default route in the \'default\' table so delete any default routes in the main table',
'#',
'while qt \$IP -$family route del default table ' . MAIN_TABLE . '; do',
' true',
'done',
''
);
}
emit_started_message( '', 2, $pseudo, $table, $number );
if ( get_interface_option( $interface, 'used_address_variable' ) || get_interface_option( $interface, 'used_gateway_variable' ) ) {
@@ -1194,12 +1250,14 @@ CEOF
"qt \$TC qdisc del dev $physical ingress\n" ) if $tcdevices->{$interface};
}
emit( "echo 1 > \${VARDIR}/${physical}.status" );
emit( "echo 1 > \${VARDIR}/${physical}.status",
$pseudo ? "run_disabled_exit ${physical} ${interface}" : "run_disabled_exit ${physical} ${interface} ${table}"
);
if ( $pseudo ) {
emit( "progress_message2 \" Optional Interface $table stopped\"" );
emit( "progress_message2 \"Optional Interface $table stopped\"" );
} else {
emit( "progress_message2 \" Provider $table ($number) stopped\"" );
emit( "progress_message2 \"Provider $table ($number) stopped\"" );
}
pop_indent;
@@ -1300,7 +1358,7 @@ sub add_an_rtrule1( $$$$$ ) {
$priority = "pref $priority";
push @{$providerref->{rules}}, "qt \$IP -$family rule del $source ${dest}${mark} $priority" if $config{DELETE_THEN_ADD};
push @{$providerref->{rules}}, "qt \$IP -$family rule del $source ${dest}${mark} $priority" if $persistent || $config{DELETE_THEN_ADD};
push @{$providerref->{rules}}, "run_ip rule add $source ${dest}${mark} $priority table $id";
if ( $persistent ) {
@@ -1398,22 +1456,22 @@ sub add_a_route( ) {
if ( $gateway ne '-' ) {
if ( $device ne '-' ) {
push @$routes, qq(run_ip route add $dest via $gateway dev $physical table $id);
push @$persistent_routes, qq(run_ip route add $dest via $gateway dev $physical table $id) if $persistent;
push @$routes, qq(run_ip route replace $dest via $gateway dev $physical table $id);
push @$persistent_routes, qq(run_ip route replace $dest via $gateway dev $physical table $id) if $persistent;
push @$routes, q(echo "$IP ) . qq(-$family route del $dest via $gateway dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
} elsif ( $null ) {
push @$routes, qq(run_ip route add $null $dest table $id);
push @$persistent_routes, qq(run_ip route add $null $dest table $id) if $persistent;
push @$routes, qq(run_ip route replace $null $dest table $id);
push @$persistent_routes, qq(run_ip route replace $null $dest table $id) if $persistent;
push @$routes, q(echo "$IP ) . qq(-$family route del $null $dest table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
} else {
push @$routes, qq(run_ip route add $dest via $gateway table $id);
push @$persistent_routes, qq(run_ip route add $dest via $gateway table $id) if $persistent;
push @$routes, qq(run_ip route replace $dest via $gateway table $id);
push @$persistent_routes, qq(run_ip route replace $dest via $gateway table $id) if $persistent;
push @$routes, q(echo "$IP ) . qq(-$family route del $dest via $gateway table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
}
} else {
fatal_error "You must specify a device for this route" unless $physical;
push @$routes, qq(run_ip route add $dest dev $physical table $id);
push @$persistent_routes, qq(run_ip route add $dest dev $physical table $id) if $persistent;
push @$routes, qq(run_ip route replace $dest dev $physical table $id);
push @$persistent_routes, qq(run_ip route replace $dest dev $physical table $id) if $persistent;
push @$routes, q(echo "$IP ) . qq(-$family route del $dest dev $physical table $id > /dev/null 2>&1" >> \${VARDIR}/undo_${provider}_routing) if $number >= DEFAULT_TABLE;
}
@@ -1516,9 +1574,9 @@ sub finish_providers() {
} else {
emit ( " if echo \$DEFAULT_ROUTE | grep -q 'nexthop.+nexthop'; then",
" qt \$IP -6 route delete default scope global table $table \$DEFAULT_ROUTE",
" run_ip -6 route add default scope global table $table \$DEFAULT_ROUTE",
" run_ip route add default scope global table $table \$DEFAULT_ROUTE",
' else',
" run_ip -6 route replace default scope global table $table \$DEFAULT_ROUTE",
" run_ip route replace default scope global table $table \$DEFAULT_ROUTE",
' fi',
'' );
}
@@ -1536,7 +1594,7 @@ sub finish_providers() {
' error_message "WARNING: No Default route added (all \'balance\' providers are down)"' );
if ( $config{RESTORE_DEFAULT_ROUTE} ) {
emit qq( restore_default_route $config{USE_DEFAULT_RT} && error_message "NOTICE: Default route restored")
emit qq( [ -z "\${FALLBACK_ROUTE}\${g_fallback}" ] && restore_default_route $config{USE_DEFAULT_RT} && error_message "NOTICE: Default route restored")
} else {
emit qq( qt \$IP -$family route del default table $table && error_message "WARNING: Default route deleted from table $table");
}
@@ -1563,7 +1621,7 @@ sub finish_providers() {
}
emit ( '#',
'# Delete any routes in the \'balance\' table',
'# Delete any default routes with metric 0 in the \'balance\' table',
'#',
"while qt \$IP -$family route del default table $balance; do",
' true',
@@ -1591,7 +1649,10 @@ sub finish_providers() {
'fi',
'' );
} elsif ( $config{USE_DEFAULT_RT} ) {
emit( "delete_default_routes $default",
emit( '#',
'# No balanced fallback routes - delete any routes with metric 0 from the \'default\' table',
'#',
"delete_default_routes $default",
''
);
}
@@ -1781,7 +1842,7 @@ sub map_provider_to_interface() {
my $haveoptional;
for my $providerref ( sort { $a->{number} cmp $b->{number} } values %providers ) {
for my $providerref ( values %providers ) {
if ( $providerref->{optional} ) {
unless ( $haveoptional++ ) {
emit( 'if [ -n "$interface" ]; then',
@@ -1945,7 +2006,7 @@ sub compile_updown() {
}
my @nonshared = ( grep $providers{$_}->{optional},
sort( { $providers{$a}->{number} <=> $providers{$b}->{number} } values %provider_interfaces ) );
values %provider_interfaces );
if ( @nonshared ) {
my $interfaces = join( '|', map $providers{$_}->{physical}, @nonshared );
@@ -2140,7 +2201,7 @@ sub handle_optional_interfaces( $ ) {
# names but they might derive from wildcard interface entries. Optional interfaces which do not have
# wildcard physical names are also included in the providers table.
#
for my $providerref ( grep $_->{optional} , sort { $a->{number} <=> $b->{number} } values %providers ) {
for my $providerref ( grep $_->{optional} , values %providers ) {
push @interfaces, $providerref->{interface};
$wildcards ||= $providerref->{wildcard};
}

View File

@@ -154,7 +154,7 @@ sub setup_proxy_arp() {
emit '';
for my $interface ( sort keys %reset ) {
for my $interface ( keys %reset ) {
unless ( $set{interface} ) {
my $physical = get_physical $interface;
emit ( "if [ -f /proc/sys/net/ipv$family/conf/$physical/$proc_file ]; then" ,
@@ -163,7 +163,7 @@ sub setup_proxy_arp() {
}
}
for my $interface ( sort keys %set ) {
for my $interface ( keys %set ) {
my $physical = get_physical $interface;
emit ( "if [ -f /proc/sys/net/ipv$family/conf/$physical/$proc_file ]; then" ,
" echo 1 > /proc/sys/net/ipv$family/conf/$physical/$proc_file" );

File diff suppressed because it is too large Load Diff

View File

@@ -1434,7 +1434,7 @@ sub process_tc_filter2( $$$$$$$$$ ) {
while ( @sportlist ) {
my ( $sport, $smask ) = ( shift @sportlist, shift @sportlist );
$rule .= "\\\n cmp\\( u16 at 0 layer 2 mask $smask eq 0x$sport \\)";
$rule .= "\\\n cmp\\( u16 at 0 layer 2 mask 0x$smask eq 0x$sport \\)";
$rule .= ' or' if @sportlist;
}
@@ -1924,7 +1924,7 @@ sub process_traffic_shaping() {
my ( $options, $redopts ) = ( '', $tcref->{redopts} );
for my $option ( sort keys %validredoptions ) {
for my $option ( keys %validredoptions ) {
my $type = $validredoptions{$option};
if ( my $value = $redopts->{$option} ) {
@@ -1943,7 +1943,7 @@ sub process_traffic_shaping() {
my ( $options, $codelopts ) = ( '', $tcref->{codelopts} );
for my $option ( sort keys %validcodeloptions ) {
for my $option ( keys %validcodeloptions ) {
my $type = $validcodeloptions{$option};
if ( my $value = $codelopts->{$option} ) {
@@ -2312,9 +2312,10 @@ EOF
EOF
}
return ( $mangle, $fn1 );
}
return ( $mangle, $fn1 );
}
#

View File

@@ -92,7 +92,7 @@ our @EXPORT = ( qw( NOTHING
find_interfaces_by_option
find_interfaces_by_option1
get_interface_option
get_interface_origin
get_interface_origin
interface_has_option
set_interface_option
interface_zone
@@ -108,55 +108,37 @@ our @EXPORT = ( qw( NOTHING
our @EXPORT_OK = qw( initialize );
our $VERSION = 'MODULEVERSION';
#
# IPSEC Option types
#
use constant { NOTHING => 'NOTHING',
NUMERIC => '0x[\da-fA-F]+|\d+',
NETWORK => '\d+.\d+.\d+.\d+(\/\d+)?',
IPSECPROTO => 'ah|esp|ipcomp',
IPSECMODE => 'tunnel|transport'
};
#
# Option columns
#
use constant { IN_OUT => 1,
IN => 2,
OUT => 3 };
#
# Zone Table.
#
# @zones contains the ordered list of zones with sub-zones appearing before their parents.
#
# %zones{<zone1> => {name => <name>,
# type => <zone type> FIREWALL, IP, IPSEC, BPORT;
# complex => 0|1
# super => 0|1
# options => { in_out => < policy match string >
# in => < policy match string >
# out => < policy match string >
# }
# parents => [ <parents> ] Parents, Children and interfaces are listed by name
# children => [ <children> ]
# interfaces => { <interfaces1> => 1, ... }
# bridge => <bridge>
# hosts { <type> } => [ { <interface1> => { ipsec => 'ipsec'|'none'
# options => { <option1> => <value1>
# ...
# }
# hosts => [ <net1> , <net2> , ... ]
# exclusions => [ <net1>, <net2>, ... ]
# origin => <where defined>
# }
# <interface2> => ...
# }
# ]
# }
# <zone2> => ...
# }
# type => <zone type> FIREWALL, IP, IPSEC, BPORT;
# complex => 0|1
# super => 0|1
# options => { in_out => < policy match string >
# in => < policy match string >
# out => < policy match string >
# }
# parents => [ <parents> ] Parents, Children and interfaces are listed by name
# children => [ <children> ]
# interfaces => { <interfaces1> => 1, ... }
# bridge => <bridge>
# hosts { <type> } => [ { <interface1> => { ipsec => 'ipsec'|'none'
# options => { <option1> => <value1>
# ...
# }
# hosts => [ <net1> , <net2> , ... ]
# exclusions => [ <net1>, <net2>, ... ]
# origin => <where defined>
# }
# <interface2> => ...
# }
# ]
# }
# <zone2> => ...
# }
#
# $firewall_zone names the firewall zone.
#
@@ -178,27 +160,27 @@ our %reservedName = ( all => 1,
#
# @interfaces lists the interface names in the order that they appear in the interfaces file.
#
# %interfaces { <interface1> => { name => <name of interface>
# root => <name without trailing '+'>
# options => { port => undef|1
# { <option1> } => <val1> , #See %validinterfaceoptions
# ...
# }
# zone => <zone name>
# multizone => undef|1 #More than one zone interfaces through this interface
# nets => <number of nets in interface/hosts records referring to this interface>
# bridge => <bridge name> # Same as ->{name} if not a bridge port.
# ports => <number of port on this bridge>
# ipsec => undef|1 # Has an ipsec host group
# broadcasts => 'none', 'detect' or [ <addr1>, <addr2>, ... ]
# number => <ordinal position in the interfaces file>
# physical => <physical interface name>
# base => <shell variable base representing this interface>
# wildcard => undef|1 # Wildcard Name
# zones => { zone1 => 1, ... }
# origin => <where defined>
# }
# }
# %interfaces { <interface1> => { name => <name of interface>
# root => <name without trailing '+'>
# options => { port => undef|1
# { <option1> } => <val1> , #See %validinterfaceoptions
# ...
# }
# zone => <zone name>
# multizone => undef|1 #More than one zone interfaces through this interface
# nets => <number of nets in interface/hosts records referring to this interface>
# bridge => <bridge name> # Same as ->{name} if not a bridge port.
# ports => <number of port on this bridge>
# ipsec => undef|1 # Has an ipsec host group
# broadcasts => 'none', 'detect' or [ <addr1>, <addr2>, ... ]
# number => <ordinal position in the interfaces file>
# physical => <physical interface name>
# base => <shell variable base representing this interface>
# wildcard => undef|1 # Wildcard Name
# zones => { zone1 => 1, ... }
# origin => <where defined>
# }
# }
#
# The purpose of the 'base' member is to ensure that the base names associated with the physical interfaces are assigned in
# the same order as the interfaces are encountered in the configuration files.
@@ -221,6 +203,26 @@ our $zonemarkincr;
our $zonemarklimit;
our $loopback_interface;
#
# IPSEC Option types
#
use constant { NOTHING => 'NOTHING',
NUMERIC => '0x[\da-fA-F]+|\d+',
IPSECPROTO => 'ah|esp|ipcomp',
IPSECMODE => 'tunnel|transport'
};
sub NETWORK() {
$family == F_IPV4 ? '\d+.\d+.\d+.\d+(\/\d+)?' : '(?:[0-9a-fA-F]{0,4}:){2,7}[0-9a-fA-F]{0,4}(?:\/d+)?';
}
#
# Option columns
#
use constant { IN_OUT => 1,
IN => 2,
OUT => 3 };
use constant { FIREWALL => 1,
IP => 2,
BPORT => 4,
@@ -276,19 +278,7 @@ our %maxoptionvalue = ( routefilter => 2, mss => 100000 , wait => 120 , ignore =
our %validhostoptions;
our %validzoneoptions = ( mss => NUMERIC,
nomark => NOTHING,
blacklist => NOTHING,
dynamic_shared => NOTHING,
strict => NOTHING,
next => NOTHING,
reqid => NUMERIC,
spi => NUMERIC,
proto => IPSECPROTO,
mode => IPSECMODE,
"tunnel-src" => NETWORK,
"tunnel-dst" => NETWORK,
);
our %validzoneoptions;
use constant { UNRESTRICTED => 1, NOFW => 2 , COMPLEX => 8, IN_OUT_ONLY => 16 };
#
@@ -330,6 +320,20 @@ sub initialize( $$ ) {
$minroot = 0;
$loopback_interface = '';
%validzoneoptions = ( mss => NUMERIC,
nomark => NOTHING,
blacklist => NOTHING,
dynamic_shared => NOTHING,
strict => NOTHING,
next => NOTHING,
reqid => NUMERIC,
spi => NUMERIC,
proto => IPSECPROTO,
mode => IPSECMODE,
"tunnel-src" => NETWORK,
"tunnel-dst" => NETWORK,
);
if ( $family == F_IPV4 ) {
%validinterfaceoptions = (arp_filter => BINARY_IF_OPTION,
arp_ignore => ENUM_IF_OPTION,
@@ -407,6 +411,8 @@ sub initialize( $$ ) {
forward => BINARY_IF_OPTION,
physical => STRING_IF_OPTION + IF_OPTION_HOST,
unmanaged => SIMPLE_IF_OPTION,
upnp => SIMPLE_IF_OPTION,
upnpclient => SIMPLE_IF_OPTION,
wait => NUMERIC_IF_OPTION + IF_OPTION_WILDOK,
);
%validhostoptions = (
@@ -695,6 +701,40 @@ sub haveipseczones() {
0;
}
#
# Returns 1 if the two interfaces passed are related
#
sub interface_match( $$ ) {
my ( $piface, $ciface ) = @_;
return 1 if $piface eq $ciface;
my ( $pifaceref, $cifaceref ) = @interfaces{$piface, $ciface};
return 1 if $piface eq $cifaceref->{bridge};
return 1 if $ciface eq $pifaceref->{bridge};
if ( $minroot ) {
if ( $piface =~ /\+$/ ) {
my $root = $pifaceref->{root};
my $rlength = length( $root );
while ( length( $ciface ) >= $rlength ) {
return 1 if $ciface eq $root;
chop $ciface;
}
} elsif ( $ciface =~ /\+$/ ) {
my $root = $cifaceref->{root};
my $rlength = length( $root );
while ( length( $piface ) >= $rlength ) {
return 1 if $piface eq $root;
chop $piface;
}
}
}
0;
}
#
# Report about zones.
#
@@ -713,10 +753,10 @@ sub zone_report()
my $printed = 0;
if ( $hostref ) {
for my $type ( sort keys %$hostref ) {
for my $type ( keys %$hostref ) {
my $interfaceref = $hostref->{$type};
for my $interface ( sort keys %$interfaceref ) {
for my $interface ( keys %$interfaceref ) {
my $iref = $interfaces{$interface};
my $arrayref = $interfaceref->{$interface};
@@ -732,7 +772,7 @@ sub zone_report()
if ( $family == F_IPV4 ) {
progress_message_nocompress " $iref->{physical}:$grouplist";
} else {
progress_message_nocompress " $iref->{physical}:<$grouplist>";
progress_message_nocompress " $iref->{physical}:[$grouplist]";
}
$printed = 1;
}
@@ -741,6 +781,17 @@ sub zone_report()
}
}
PARENT:
for my $p ( @{$zoneref->{parents}} ) {
for my $pi ( keys ( %{$zones{$p}{interfaces}} ) ) {
for my $ci ( keys( %{$zoneref->{interfaces}} ) ) {
next PARENT if interface_match( $pi, $ci );
}
}
warning_message "Zone $zone is defined as a sub-zone of $p, yet the two zones have no interface in common";
}
unless ( $printed ) {
fatal_error "No bridge has been associated with zone $zone" if $type & BPORT && ! $zoneref->{bridge};
warning_message "*** $zone is an EMPTY ZONE ***" unless $type == FIREWALL;
@@ -766,10 +817,10 @@ sub dump_zone_contents() {
$entry .= ( " mark=" . in_hex( $zoneref->{mark} ) ) if exists $zoneref->{mark};
if ( $hostref ) {
for my $type ( sort keys %$hostref ) {
for my $type ( keys %$hostref ) {
my $interfaceref = $hostref->{$type};
for my $interface ( sort keys %$interfaceref ) {
for my $interface ( keys %$interfaceref ) {
my $iref = $interfaces{$interface};
my $arrayref = $interfaceref->{$interface};
@@ -1275,6 +1326,7 @@ sub process_interface( $$ ) {
my $numval = numeric_value $value;
fatal_error "Invalid value ($value) for option $option" unless defined $numval && $numval <= $maxoptionvalue{$option};
require_capability 'TCPMSS_TARGET', "mss=$value", 's' if $option eq 'mss';
$options{logmartians} = 1 if $option eq 'routefilter' && $numval && ! $config{LOG_MARTIANS};
$options{$option} = $numval;
$hostoptions{$option} = $numval if $hostopt;
} elsif ( $type == IPLIST_IF_OPTION ) {
@@ -1312,7 +1364,7 @@ sub process_interface( $$ ) {
assert(0);
}
} elsif ( $type == STRING_IF_OPTION ) {
fatal_error "The '$option' option requires a value" unless defined $value;
fatal_error "The '$option' option requires a value" unless supplied $value;
if ( $option eq 'physical' ) {
fatal_error "Invalid interface name ($interface)" if $interface =~ /[()\[\]\*\?%]/;
@@ -1568,9 +1620,7 @@ sub known_interface($)
#
# We have wildcard interfaces -- see if this interface matches one of their roots
#
while ( length $iface > $minroot ) {
chop $iface;
while ( length $iface >= $minroot ) {
if ( my $i = $roots{$iface} ) {
#
# Found one
@@ -1592,6 +1642,8 @@ sub known_interface($)
};
return $interfaceref;
}
chop $iface;
}
}
@@ -2218,9 +2270,9 @@ sub find_hosts_by_option( $ ) {
}
for my $zone ( grep ! ( $zones{$_}{type} & FIREWALL ) , @zones ) {
for my $type (sort keys %{$zones{$zone}{hosts}} ) {
for my $type (keys %{$zones{$zone}{hosts}} ) {
my $interfaceref = $zones{$zone}{hosts}->{$type};
for my $interface ( sort keys %$interfaceref ) {
for my $interface ( keys %$interfaceref ) {
my $arrayref = $interfaceref->{$interface};
for my $host ( @{$arrayref} ) {
my $ipsec = $host->{ipsec};
@@ -2248,9 +2300,9 @@ sub find_zone_hosts_by_option( $$ ) {
my @hosts;
unless ( $zones{$zone}{type} & FIREWALL ) {
for my $type (sort keys %{$zones{$zone}{hosts}} ) {
for my $type (keys %{$zones{$zone}{hosts}} ) {
my $interfaceref = $zones{$zone}{hosts}->{$type};
for my $interface ( sort keys %$interfaceref ) {
for my $interface ( keys %$interfaceref ) {
my $arrayref = $interfaceref->{$interface};
for my $host ( @{$arrayref} ) {
if ( my $value = $host->{options}{$option} ) {

View File

@@ -43,6 +43,8 @@
# --inline # Update alternative column specifications
# --update # Update configuration to current release
#
# If the <filename> is omitted, then a 'check' operation is performed.
#
use strict;
use FindBin;
use lib "$FindBin::Bin";

View File

@@ -1,4 +1,4 @@
# (c) 1999-2016 - Tom Eastep (teastep@shorewall.net)
# (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
#
# This program is part of Shorewall.
#
@@ -32,7 +32,7 @@
# down Stop an optional interface
# enable Enable an optional interface
# help Show command syntax
# reenable Disable then nable an optional
# reenable Disable then enable an optional
# interface
# refresh Refresh the firewall
# reload Reload the firewall
@@ -349,7 +349,7 @@ replace_default_route() # $1 = USE_DEFAULT_RT
case "$default_route" in
*metric*)
#
# Don't restore a default route with a metric unless USE_DEFAULT_RT=Yes. Otherwise, we only replace the one with metric 0
# Don't restore a default route with a metric unless USE_DEFAULT_RT=Yes or =Exact. Otherwise, we only replace the one with metric 0
#
[ -n "$1" ] && qt $IP -$g_family route replace $default_route && progress_message "Default Route (${default_route# }) restored"
default_route=
@@ -369,7 +369,7 @@ replace_default_route() # $1 = USE_DEFAULT_RT
delete_default_routes() # $1 = table number
{
$IP -$g_family route ls table $1 | grep -F default | grep -vF metric | while read route; do
qt $IP -$g_family route del $route
qt $IP -$g_family route del $route table $1
done
}
@@ -421,7 +421,7 @@ restore_default_route() # $1 = USE_DEFAULT_RT
conditionally_flush_conntrack() {
if [ -n "$g_purge" ]; then
if [ -n $(mywhich conntrack) ]; then
if [ -n "$(mywhich conntrack)" ]; then
conntrack -F
else
error_message "WARNING: The '-p' option requires the conntrack utility which does not appear to be installed on this system"
@@ -899,7 +899,7 @@ detect_dynamic_gateway() { # $1 = interface
#
# Detect the gateway through an interface
#
detect_gateway() # $1 = interface
detect_gateway() # $1 = interface $2 = table number
{
local interface
interface=$1
@@ -912,6 +912,8 @@ detect_gateway() # $1 = interface
# Maybe there's a default route through this gateway already
#
[ -n "$gateway" ] || gateway=$(find_gateway $($IP -4 route list dev $interface | grep ^default))
[ -z "$gateway" -a -n "$2" ] && gateway=$(find_gateway $($IP -4 route list dev $interface table $2 | grep ^default))
#
# Last hope -- is there a load-balancing route through the interface?
#

View File

@@ -78,11 +78,13 @@ reload_command() {
detect_configuration
define_firewall
status=$?
if [ -n "$SUBSYSLOCK" ]; then
[ $status -eq 0 ] && touch $SUBSYSLOCK || rm -f $SUBSYSLOCK
fi
[ $status -eq 0 ] && progress_message3 "done."
if [ $status -eq 0 ]; then
[ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
progress_message3 "done."
else
[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
fi
}
################################################################################
@@ -127,8 +129,10 @@ g_counters=
g_compiled=
g_file=
g_docker=
g_dockeringress=
g_dockernetwork=
g_forcereload=
g_fallback=
[ -n "$SERVICEDIR" ] && SUBSYSLOCK=
@@ -418,9 +422,12 @@ case "$COMMAND" in
[ $# -ne 1 ] && usage 2
mutex_on
if product_is_started; then
COMMAND=disable
detect_configuration $1
COMMAND=enable disable_provider $1 Yes
COMMAND=disable enable_provider $1 Yes
disable_provider $1 Yes
COMMAND=enable
detect_configuration $1
enable_provider $1 Yes
fi
mutex_off
status=0

View File

@@ -0,0 +1,13 @@
#
# Shorewall - Sample Params File for universal configuration.
# Copyright (C) 2006-2014 by the Shorewall Team
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# See the file README.txt for further details.
#------------------------------------------------------------------------------------------------------------
# For information on entries in this file, type "man shorewall-params"
######################################################################################################################################################################################################

View File

@@ -7,7 +7,6 @@
# http://www.shorewall.net/manpages/shorewall-policy.html
#
###############################################################################
#SOURCE DEST POLICY LOG LIMIT: CONNLIMIT:
# LEVEL BURST MASK
#SOURCE DEST POLICY LOGLEVEL RATE CONNLIMIT
$FW net ACCEPT
net all DROP
net all DROP $LOG_LEVEL

View File

@@ -33,6 +33,8 @@ FIREWALL=
# L O G G I N G
###############################################################################
LOG_LEVEL="info"
BLACKLIST_LOG_LEVEL=
INVALID_LOG_LEVEL=
@@ -53,19 +55,19 @@ LOGTAGONLY=No
LOGLIMIT="s:1/sec:10"
MACLIST_LOG_LEVEL=info
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL=
RPFILTER_LOG_LEVEL=info
RPFILTER_LOG_LEVEL="$LOG_LEVEL"
SFILTER_LOG_LEVEL=info
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL=info
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL=info
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
@@ -108,10 +110,11 @@ TC=
###############################################################################
ACCEPT_DEFAULT="none"
DROP_DEFAULT="Drop"
BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="Reject"
REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
@@ -140,6 +143,8 @@ AUTOHELPERS=Yes
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
@@ -200,8 +205,6 @@ MINIUPNPD=No
MARK_IN_FORWARD_CHAIN=No
MODULE_SUFFIX="ko ko.xz"
MULTICAST=No
MUTEX_TIMEOUT=60
@@ -212,6 +215,8 @@ OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=0
REJECT_ACTION=
REQUIRE_INTERFACE=Yes
@@ -242,6 +247,8 @@ TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=No
USE_PHYSICAL_NAMES=No
USE_RT_NAMES=No

View File

@@ -0,0 +1,13 @@
#
# Shorewall - Sample Params File for one-interface configuration.
# Copyright (C) 2006-2014 by the Shorewall Team
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# See the file README.txt for further details.
#------------------------------------------------------------------------------------------------------------
# For information on entries in this file, type "man shorewall-params"
######################################################################################################################################################################################################

View File

@@ -11,8 +11,8 @@
#-----------------------------------------------------------------------------
# For information about entries in this file, type "man shorewall-policy"
###############################################################################
#SOURCE DEST POLICY LOG LEVEL LIMIT:BURST
$FW net ACCEPT
net all DROP info
#SOURCE DEST POLICY LOGLEVEL RATE CONNLIMIT
$FW net ACCEPT
net all DROP $LOG_LEVEL
# The FOLLOWING POLICY MUST BE LAST
all all REJECT info
all all REJECT $LOG_LEVEL

View File

@@ -44,6 +44,8 @@ FIREWALL=
# L O G G I N G
###############################################################################
LOG_LEVEL=info
BLACKLIST_LOG_LEVEL=
INVALID_LOG_LEVEL=
@@ -64,19 +66,19 @@ LOGTAGONLY=No
LOGLIMIT="s:1/sec:10"
MACLIST_LOG_LEVEL=info
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL=
RPFILTER_LOG_LEVEL=info
RPFILTER_LOG_LEVEL="$LOG_LEVEL"
SFILTER_LOG_LEVEL=info
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL=info
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL=info
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
@@ -119,10 +121,11 @@ TC=
###############################################################################
ACCEPT_DEFAULT="none"
DROP_DEFAULT="Drop"
BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="Reject"
REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
@@ -151,6 +154,8 @@ AUTOHELPERS=Yes
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
@@ -211,8 +216,6 @@ MINIUPNPD=No
MARK_IN_FORWARD_CHAIN=No
MODULE_SUFFIX="ko ko.xz"
MULTICAST=No
MUTEX_TIMEOUT=60
@@ -223,6 +226,8 @@ OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=0
REJECT_ACTION=
REQUIRE_INTERFACE=No
@@ -253,6 +258,8 @@ TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=No
USE_PHYSICAL_NAMES=No
USE_RT_NAMES=No

View File

@@ -0,0 +1,13 @@
#
# Shorewall - Sample Params File for three-interface configuration.
# Copyright (C) 2006-2014 by the Shorewall Team
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# See the file README.txt for further details.
#------------------------------------------------------------------------------------------------------------
# For information on entries in this file, type "man shorewall-params"
######################################################################################################################################################################################################

View File

@@ -11,9 +11,9 @@
#------------------------------------------------------------------------------
# For information about entries in this file, type "man shorewall-policy"
###############################################################################
#SOURCE DEST POLICY LOG LEVEL LIMIT:BURST
#SOURCE DEST POLICY LOGLEVEL RATE CONNLIMIT
loc net ACCEPT
net all DROP info
loc net ACCEPT
net all DROP $LOG_LEVEL
# THE FOLLOWING POLICY MUST BE LAST
all all REJECT info
all all REJECT $LOG_LEVEL

View File

@@ -41,6 +41,8 @@ FIREWALL=
# L O G G I N G
###############################################################################
LOG_LEVEL="info"
BLACKLIST_LOG_LEVEL=
INVALID_LOG_LEVEL=
@@ -61,19 +63,19 @@ LOGTAGONLY=No
LOGLIMIT="s:1/sec:10"
MACLIST_LOG_LEVEL=info
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL=
RPFILTER_LOG_LEVEL=info
RPFILTER_LOG_LEVEL="$LOG_LEVEL"
SFILTER_LOG_LEVEL=info
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL=info
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL=info
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
@@ -116,10 +118,11 @@ TC=
###############################################################################
ACCEPT_DEFAULT="none"
DROP_DEFAULT="Drop"
BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="Reject"
REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
@@ -148,6 +151,8 @@ AUTOHELPERS=Yes
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
@@ -208,8 +213,6 @@ MINIUPNPD=No
MARK_IN_FORWARD_CHAIN=No
MODULE_SUFFIX="ko ko.xz"
MULTICAST=No
MUTEX_TIMEOUT=60
@@ -220,6 +223,8 @@ OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=0
REJECT_ACTION=
REQUIRE_INTERFACE=No
@@ -250,6 +255,8 @@ TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=No
USE_PHYSICAL_NAMES=No
USE_RT_NAMES=No

View File

@@ -0,0 +1,13 @@
#
# Shorewall - Sample Params File for two-interface configuration.
# Copyright (C) 2006-2014 by the Shorewall Team
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# See the file README.txt for further details.
#------------------------------------------------------------------------------------------------------------
# For information on entries in this file, type "man shorewall-params"
######################################################################################################################################################################################################

View File

@@ -11,10 +11,10 @@
#------------------------------------------------------------------------------
# For information about entries in this file, type "man shorewall-policy"
###############################################################################
#SOURCE DEST POLICY LOG LEVEL LIMIT:BURST
#SOURCE DEST POLICY LOGLEVEL RATE CONNLIMIT
loc net ACCEPT
net all DROP info
# THE FOLLOWING POLICY MUST BE LAST
all all REJECT info
loc net ACCEPT
net all DROP $LOG_LEVEL
# THE FOLOWING POLICY MUST BE LAST
all all REJECT $LOG_LEVEL

View File

@@ -44,6 +44,8 @@ FIREWALL=
# L O G G I N G
###############################################################################
LOG_LEVEL="info"
BLACKLIST_LOG_LEVEL=
INVALID_LOG_LEVEL=
@@ -64,19 +66,19 @@ LOGTAGONLY=No
LOGLIMIT="s:1/sec:10"
MACLIST_LOG_LEVEL=info
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL=
RPFILTER_LOG_LEVEL=info
RPFILTER_LOG_LEVEL="$LOG_LEVEL"
SFILTER_LOG_LEVEL=info
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL=info
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL=info
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
@@ -119,10 +121,11 @@ TC=
###############################################################################
ACCEPT_DEFAULT="none"
DROP_DEFAULT="Drop"
BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="Reject"
REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
@@ -151,6 +154,8 @@ AUTOHELPERS=Yes
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
@@ -211,8 +216,6 @@ MINIUPNPD=No
MARK_IN_FORWARD_CHAIN=No
MODULE_SUFFIX="ko ko.xz"
MULTICAST=No
MUTEX_TIMEOUT=60
@@ -223,6 +226,8 @@ OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=0
REJECT_ACTION=
REQUIRE_INTERFACE=No
@@ -253,6 +258,8 @@ TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=No
USE_PHYSICAL_NAMES=No
USE_RT_NAMES=No

View File

@@ -20,4 +20,4 @@
MASQUERADE 10.0.0.0/8,\
169.254.0.0/16,\
172.16.0.0/12,\
92.168.0.0/16 eth0
192.168.0.0/16 eth0

View File

@@ -6,47 +6,50 @@
# Please see http://shorewall.net/Actions.html for additional
# information.
#
# Builtin Actions are:
#
?if 0
A_ACCEPT # Audits then accepts a connection request
A_DROP # Audits then drops a connection request
allowBcast # Silently Allow Broadcast/multicast
dropBcast # Silently Drop Broadcast/multicast
dropNotSyn # Silently Drop Non-syn TCP packets
rejNotSyn # Silently Reject Non-syn TCP packets
allowinUPnP # Allow UPnP inbound (to firewall) traffic
forwardUPnP # Allow traffic that upnpd has redirected from 'upnp' interfaces.
Limit # Limit the rate of connections from each individual IP address
?endif
###############################################################################
#ACTION
A_Drop # Audited Default Action for DROP policy
A_REJECT noinline,logjump # Audits then rejects a connection request
A_REJECT! inline # Audits then rejects a connection request
A_Reject # Audited Default action for REJECT policy
A_AllowICMPs inline # Audited version of AllowICMPs
A_Drop # Audited Default Action for DROP policy
A_REJECT noinline,logjump # Audits then rejects a connection request
A_REJECT! inline # Audits then rejects a connection request
A_Reject # Audited Default action for REJECT policy
AllowICMPs inline # Allow Required ICMP packets
allowBcast inline # Silently Allow Broadcast
allowinUPnP inline # Allow UPnP inbound (to firewall) traffic
allowInvalid inline # Accepts packets in the INVALID conntrack state
AutoBL noinline # Auto-blacklist IPs that exceed thesholds
AutoBLL noinline # Helper for AutoBL
Broadcast noinline,audit # Handles Broadcast/Multicast/Anycast
DNSAmp # Matches one-question recursive DNS queries
Drop # Default Action for DROP policy
allowMcast inline # Silently Allow Multicast
AutoBL noinline # Auto-blacklist IPs that exceed thesholds
AutoBLL noinline # Helper for AutoBL
BLACKLIST logjump,section # Add sender to the dynamic blacklist
Broadcast noinline,audit # Handles Broadcast/Anycast
DNSAmp # Matches one-question recursive DNS queries
Drop # Default Action for DROP policy (deprecated)
dropBcast inline # Silently Drop Broadcast
dropBcasts inline # Silently Drop Broadcast
dropInvalid inline # Drops packets in the INVALID conntrack state
DropSmurfs noinline # Drop smurf packets
dropMcast inline # Silently Drop Multicast
dropNotSyn noinline # Silently Drop Non-syn TCP packets
DropDNSrep inline # Drops DNS replies
DropSmurfs noinline # Drop smurf packets
Established inline,\ # Handles packets in the ESTABLISHED state
state=ESTABLISHED #
state=ESTABLISHED #
FIN inline,audit # Handles ACK,FIN,PSH packets
forwardUPnP noinline # Allow traffic that upnpd has redirected from 'upnp' interfaces.
GlusterFS inline # Handles GlusterFS
IfEvent noinline # Perform an action based on an event
Invalid inline,audit,\ # Handles packets in the INVALID conntrack state
state=INVALID #
IfEvent noinline # Perform an action based on an event
Invalid inline,audit,\ # Handles packets in the INVALID conntrack state
state=INVALID #
Limit noinline # Limit the rate of connections from each individual IP address
Multicast noinline,audit # Handles Multicast
New inline,state=NEW # Handles packets in the NEW conntrack state
NotSyn inline,audit # Handles TCP packets which do not have SYN=1 and ACK=0
Reject # Default Action for REJECT policy
Related inline,\ # Handles packets in the RELATED conntrack state
state=RELATED #
NotSyn inline,audit # Handles TCP packets which do not have SYN=1 and ACK=0
rejNotSyn noinline # Silently Reject Non-syn TCP packets
Reject # Default Action for REJECT policy (deprecated)
Related inline,\ # Handles packets in the RELATED conntrack state
state=RELATED #
ResetEvent inline # Reset an Event
RST inline,audit # Handle packets with RST set
RST inline,audit # Handle packets with RST set
SetEvent inline # Initialize an event
TCPFlags # Handle bad flag combinations.
Untracked inline,\ # Handles packets in the UNTRACKED conntrack state
state=UNTRACKED #
TCPFlags # Handle bad flag combinations.
Untracked inline,\ # Handles packets in the UNTRACKED conntrack state
state=UNTRACKED #

View File

@@ -0,0 +1,12 @@
#
# Shorewall -- /etc/shorewall/disabled
#
# Add commands below that you want executed when an optional
# interface is successfully disabled using the 'disable' command
#
# When the commands are invoked:
#
# $1 contains the physical name of the interface
# $2 contains the logical name of the interface
# $3 contains the name of the provider associated with the interface,
if any

View File

@@ -0,0 +1,12 @@
#
# Shorewall -- /etc/shorewall/enabled
#
# Add commands below that you want executed when an optional
# interface is successfully enabled using the 'enable' command
#
# When the commands are invoked:
#
# $1 contains the physical name of the interface
# $2 contains the logical name of the interface
# $3 contains the name of the provider associated with the interface,
if any

View File

@@ -7,4 +7,4 @@
# http://www.shorewall.net/manpages/shorewall-policy.html
#
###############################################################################
#SOURCE DEST POLICY LOGLEVEL LIMIT CONNLIMIT
#SOURCE DEST POLICY LOGLEVEL RATE CONNLIMIT

View File

@@ -33,6 +33,8 @@ FIREWALL=
# L O G G I N G
###############################################################################
LOG_LEVEL="info"
BLACKLIST_LOG_LEVEL=
INVALID_LOG_LEVEL=
@@ -53,19 +55,19 @@ LOGTAGONLY=No
LOGLIMIT="s:1/sec:10"
MACLIST_LOG_LEVEL=info
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL=
RPFILTER_LOG_LEVEL=info
RPFILTER_LOG_LEVEL="$LOG_LEVEL"
SFILTER_LOG_LEVEL=info
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL=info
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL=info
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
@@ -107,11 +109,12 @@ TC=
# D E F A U L T A C T I O N S / M A C R O S
###############################################################################
ACCEPT_DEFAULT=none
DROP_DEFAULT=Drop
NFQUEUE_DEFAULT=none
QUEUE_DEFAULT=none
REJECT_DEFAULT=Reject
ACCEPT_DEFAULT="none"
BLACKLIST_DEFAULT="Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
@@ -140,6 +143,8 @@ AUTOHELPERS=Yes
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
@@ -200,8 +205,6 @@ MARK_IN_FORWARD_CHAIN=No
MINIUPNPD=No
MODULE_SUFFIX=ko
MULTICAST=No
MUTEX_TIMEOUT=60
@@ -212,6 +215,8 @@ OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=0
REJECT_ACTION=
REQUIRE_INTERFACE=No
@@ -242,6 +247,8 @@ TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=No
USE_PHYSICAL_NAMES=No
USE_RT_NAMES=No

View File

@@ -0,0 +1,26 @@
#
# Global start/restart/reload/stop options
#
OPTIONS=""
#
# Start options
#
STARTOPTIONS=""
#
# Restart options
#
RESTARTOPTIONS=""
#
# Reload options
#
RELOADOPTIONS=""
#
# Stop options
#
STOPOPTIONS=""
# EOF

Some files were not shown because too many files have changed in this diff Show More