Correct mal-formed entries in Build.xml

Signed-off-by: Tom Eastep <teastep@shorewall.net>

.gitignore

@@ -0,0 +1 @@
+*targetname

Shorewall-core/configure

@@ -1,8 +1,8 @@
 #!/bin/bash
 #
-#     Shorewall Packet Filtering Firewall RPM configuration program - V4.6
+#     Shorewall Packet Filtering Firewall configuration program - V5.2
 #
-#     (c) 2012,2014 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2012,2014,2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
 #
@@ -109,6 +109,9 @@ if [ -z "$vendor" ]; then
 	    opensuse)
 		vendor=suse
 		;;
+	    alt|basealt|altlinux)
+		vendor=alt
+		;;
 	    *)
 		vendor="$ID"
 		;;
@@ -132,6 +135,8 @@ if [ -z "$vendor" ]; then
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
 		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
+	    elif [ -f /etc/altlinux-release ] ; then
+		params[HOST]=alt
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -190,7 +195,7 @@ for p in ${!params[@]}; do
 done
 
 echo '#'                                                                 > shorewallrc
-echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
+echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
 echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 

Shorewall-core/configure.pl

@@ -1,6 +1,6 @@
 #! /usr/bin/perl -w
 #
-#     Shorewall Packet Filtering Firewall RPM configuration program - V4.5
+#     Shorewall Packet Filtering Firewall configuration program - V5.2
 #
 #     (c) 2012, 2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -74,6 +74,8 @@ unless ( defined $vendor ) {
 	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
 	    my $init = `ls -l /sbin/init`;
 	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
+	} elsif ( $id eq 'alt' || $id eq 'basealt' || $id eq 'altlinux' ) {
+	    $vendor = 'alt';
 	} else {
 	    $vendor = $id;
 	}
@@ -117,6 +119,9 @@ if ( defined $vendor ) {
 	} else {
 	    $rcfilename = 'shorewallrc.debian.sysvinit';
 	}
+    } elsif ( -f '/etc/altlinux-release' ){
+	$vendor = 'alt';
+	$rcfilename = 'shorewallrc.alt';
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -173,7 +178,12 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+if ( $ENV{SOURCE_DATE_EPOCH} ) {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date  --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
+} else {
+    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
+}
+
 print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;

Shorewall-core/install.sh

@@ -2,7 +2,7 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #       Shorewall documentation is available at http://shorewall.net
 #
@@ -172,6 +172,9 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
+		    alt|basealt|altlinux)
+			BUILD=alt
+			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -180,6 +183,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
+	    elif [ -f /etc/altlinux-release ]; then
+		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/slackware-version ] ; then
@@ -238,7 +243,7 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt|alt)
 	;;
     *)
 	fatal_error "Unknown HOST \"$HOST\""
@@ -335,9 +340,8 @@ for f in lib.* ; do
 done
 
 if [ $SHAREDIR != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.core
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/lib.cli
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.cli
 fi
 
 #

Shorewall-core/lib.base

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.base
+# Shorewall 5.2 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #

Shorewall-core/lib.common

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
+# Shorewall 5.2 -- /usr/share/shorewall/lib.common
 #
-#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2018 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -269,53 +269,48 @@ loadmodule() # $1 = module name, $2 - * arguments
 {
     local modulename
     modulename=$1
+    shift
+    local moduleoptions
+    moduleoptions=$*
     local modulefile
     local suffix
 
     if [ -d /sys/module/ ]; then
 	if ! list_search $modulename $DONT_LOAD; then
 	    if [ ! -d /sys/module/$modulename ]; then
-		shift
+		case $moduleloader in
-
+		    insmod)
-		for suffix in $MODULE_SUFFIX ; do
+			for directory in $moduledirectories; do
-		    for directory in $moduledirectories; do
+			    for modulefile in $directory/${modulename}.*; do
-			modulefile=$directory/${modulename}.${suffix}
+				if [ -f $modulefile ]; then
-
+				    insmod $modulefile $moduleoptions
-			if [ -f $modulefile ]; then
+				    return
-			    case $moduleloader in
+				fi
-				insmod)
+			    done
-				    insmod $modulefile $*
+			done
-				    ;;
+			;;
-				*)
+		    *)
-				    modprobe $modulename $*
+			modprobe -q $modulename $moduleoptions
-				    ;;
+			;;
-			    esac
+		esac
-			    break 2
-			fi
-		    done
-		done
 	    fi
 	fi
     elif ! list_search $modulename $DONT_LOAD $MODULES; then
-	shift
+	case $moduleloader in
-
+	    insmod)
-	for suffix in $MODULE_SUFFIX ; do
+		for directory in $moduledirectories; do
-	    for directory in $moduledirectories; do
+		    for modulefile in $directory/${modulename}.*; do
-		modulefile=$directory/${modulename}.${suffix}
+			if [ -f $modulefile ]; then
-
+			    insmod $modulefile $moduleoptions
-		if [ -f $modulefile ]; then
+			    return
-		    case $moduleloader in
+			fi
-			insmod)
+		    done
-			    insmod $modulefile $*
+		done
-			    ;;
+		;;
-			*)
+	    *)
-			    modprobe $modulename $*
+		modprobe -q $modulename $moduleoptions
-			    ;;
+		;;
-		    esac
+	esac
-		    break 2
-		fi
-	    done
-	done
     fi
 }
 
@@ -338,8 +333,6 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
-
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -394,8 +387,6 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
-    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
-
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -420,7 +411,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
     done
 
-    [ -n "$LOAD_HELPERS_ONLY" ] && modules=$(find_file helpers) || modules=$(find_file modules)
+    modules=$(find_file helpers)
 
     if [ -f $modules -a -n "$moduledirectories" ]; then
 	[ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
@@ -428,7 +419,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	. $modules
 	if [ $savemoduleinfo = Yes ]; then
 	    [ -d ${VARDIR} ] || mkdir -p ${VARDIR}
-	    echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir
+	    echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir
 	    cp -f $modules ${VARDIR}/.modules
 	fi
     elif [ $savemoduleinfo = Yes ]; then
@@ -510,7 +501,7 @@ ip_network() {
 
 #
 # The following hack is supplied to compensate for the fact that many of
-# the popular light-weight Bourne shell derivatives don't support XOR ("^").
+# the popular light-weight Bourne shell derivatives do not support XOR ("^").
 #
 ip_broadcast() {
     local x
@@ -760,36 +751,44 @@ mutex_on()
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
     local lockd
+    local lockbin
+    local openwrt
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
-    if [ $MUTEX_TIMEOUT -gt 0 ]; then
+    if [ -z "$g_havemutex" -a $MUTEX_TIMEOUT -gt 0 ]; then
 
 	lockd=$(dirname $LOCKFILE)
 
 	[ -d "$lockd" ] || mkdir -p "$lockd"
 
+	lockbin=$(mywhich lock)
+	[ -n "$lockbin" -a -h "$lockbin" ] && openwrt=Yes
+
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
-	    if [ -z "$lockpid" -o $lockpid = 0 ]; then
+	    if [ -z "$lockpid" ] || [ $lockpid = 0 ]; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} removed"
-	    elif [ $lockpid -eq $$ ]; then
+	    elif [ -z "$openwrt" ]; then
-                return 0
+		if [ $lockpid -eq $$ ]; then
-	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
+                    fatal_error "Mutex_on confusion"
-		rm -f ${lockf}
+		elif ! qt ps --pid ${lockpid}; then
-		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
+		    rm -f ${lockf}
+		    error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
+		fi
 	    fi
 	fi
 
-	if qt mywhich lockfile; then
+	if [ -n "$openwrt" ]; then
-	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf}
+	    lock ${lockf} || fatal_error "Can't lock ${lockf}"
+	    g_havemutex="lock -u ${lockf}"
+	elif qt mywhich lockfile; then
+	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf} || fatal_error "Can't lock ${lockf}"
+	    g_havemutex="rm -f ${lockf}"
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
-	elif qt mywhich lock; then
-            lock ${lockf}
-            chmod u=r ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -799,10 +798,15 @@ mutex_on()
 	    if  [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then
 	        # Create the lockfile
 		echo $$ > ${lockf}
+		g_havemutex="rm -f ${lockf}"
 	    else
 		echo "Giving up on lock file ${lockf}" >&2
 	    fi
 	fi
+
+	if [ -n "$g_havemutex" ]; then
+	    trap mutex_off EXIT
+	fi
     fi
 }
 
@@ -811,7 +815,10 @@ mutex_on()
 #
 mutex_off()
 {
-    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
+    if [ -n "$g_havemutex" ]; then
-    rm -f ${LOCKFILE:=${VARDIR}/lock}
+	eval $g_havemutex
+	g_havemutex=
+	trap '' exit
+    fi
 }
 

Shorewall-core/lib.core

@@ -1,7 +1,7 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/lib.core
+# Shorewall 5.2 -- /usr/share/shorewall/lib.core
 #
-#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -24,7 +24,7 @@
 # generated scripts.
 #
 
-SHOREWALL_LIBVERSION=50100
+SHOREWALL_LIBVERSION=50108
 
 #
 # Fatal Error

Shorewall-core/lib.installer

@@ -1,6 +1,5 @@
 #
-#
+# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
-# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)

Shorewall-core/lib.uninstaller

@@ -1,6 +1,5 @@
 #
-#
+# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
-# Shorewall 5.0 -- /usr/share/shorewall/lib.installer.
 #
 #     (c) 2017 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
@@ -61,7 +60,7 @@ mywhich() {
 remove_file() # $1 = file to remove
 {
     if [ -n "$1" ] ; then
-        if [ -f $1 -o -L $1 ] ; then
+        if [ -f $1 -o -h $1 ] ; then
             rm -f $1
             echo "$1 Removed"
         fi
@@ -85,7 +84,7 @@ remove_file_with_wildcard() # $1 = file with wildcard to remove
             if [ -d $f ] ; then
                 rm -rf $f
                 echo "$f Removed"
-            elif [ -f $f -o -L $f ] ; then
+            elif [ -f $f -o -h $f ] ; then
                 rm -f $f
                 echo "$f Removed"
             fi

Shorewall-core/manpages/shorewall.xml

@@ -405,20 +405,6 @@
       <replaceable>provider</replaceable> }</arg>
     </cmdsynopsis>
 
-    <cmdsynopsis>
-      <command>shorewall[6]</command>
-
-      <arg
-      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>
-
-      <arg>options</arg>
-
-      <arg
-      choice="plain"><option>refresh</option><arg><option>-n</option></arg><arg><option>-d</option></arg><arg><option>-T</option></arg><arg><option>-i</option></arg><arg>-<option>D</option>
-      <replaceable>directory</replaceable> </arg><arg
-      rep="repeat"><replaceable>chain</replaceable></arg></arg>
-    </cmdsynopsis>
-
     <cmdsynopsis>
       <command>shorewall[6][-lite]</command>
 
@@ -459,6 +445,54 @@
       <arg><replaceable>directory</replaceable></arg>
     </cmdsynopsis>
 
+    <cmdsynopsis>
+      <command>shorewall[6]</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>options</arg>
+
+      <arg choice="plain"><option>remote-getcaps</option></arg>
+
+      <arg><option>-s</option></arg>
+
+      <arg><option>-R</option></arg>
+
+      <arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
+
+      <arg><option>-T</option></arg>
+
+      <arg><option>-i</option></arg>
+
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
+
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
+    </cmdsynopsis>
+
+    <cmdsynopsis>
+      <command>shorewall[6]</command>
+
+      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>
+
+      <arg>options</arg>
+
+      <arg choice="plain"><option>remote-getrc</option></arg>
+
+      <arg><option>-s</option></arg>
+
+      <arg><option>-c</option></arg>
+
+      <arg><option>-r</option> <replaceable>root-user-name</replaceable></arg>
+
+      <arg><option>-T</option></arg>
+
+      <arg><option>-i</option></arg>
+
+      <arg><arg><option>-D</option></arg><replaceable>directory</replaceable></arg>
+
+      <arg choice="plain"><arg><replaceable>system</replaceable></arg></arg>
+    </cmdsynopsis>
+
     <cmdsynopsis>
       <command>shorewall[6]</command>
 
@@ -813,7 +847,7 @@
 
       <arg choice="req"><option>show | list | ls </option></arg>
 
-      <arg choice="plain"><option>tc</option></arg>
+      <arg choice="plain"><option>saves</option></arg>
     </cmdsynopsis>
 
     <cmdsynopsis>
@@ -1107,7 +1141,7 @@
           setting in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
 
           <para>When no <replaceable>verbosity</replaceable> is specified,
           each instance of this option causes 1 to be added to the effective
@@ -1128,7 +1162,7 @@
           setting in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
 
           <para>Each instance of this option causes 1 to be subtracted from
           the effective verbosity.</para>
@@ -1165,7 +1199,7 @@
           defined in the <ulink
           url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5))file.
+          url="/manpages/shorewall-interfaces.html">shorewall6-interfaces</ulink>(5))file.
           A <emphasis>host-list</emphasis> is comma-separated list whose
           elements are host or network addresses.<caution>
               <para>The <command>add</command> command is not very robust. If
@@ -1180,7 +1214,7 @@
           <para>Beginning with Shorewall 4.5.9, the <emphasis
           role="bold">dynamic_shared</emphasis> zone option (<ulink
           url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5),<ulink
-          url="???">shorewall6-zones</ulink>(5)) allows a single ipset to
+          url="/manpages/shorewall-zones.html">shorewall6-zones</ulink>(5)) allows a single ipset to
           handle entries for multiple interfaces. When that option is
           specified for a zone, the <command>add</command> command has the
           alternative syntax in which the <replaceable>zone</replaceable> name
@@ -1298,7 +1332,7 @@
           set to Yes in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
         </listitem>
       </varlistentry>
 
@@ -1316,7 +1350,7 @@
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
-          role="bold">refresh</emphasis> command if that script exists.</para>
+          role="bold">reload</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -1406,7 +1440,7 @@
           set to Yes in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
         </listitem>
       </varlistentry>
 
@@ -1424,7 +1458,7 @@
           defined in the <ulink
           url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6-interfaces.html">shorewall6-interfaces</ulink>(5)
+          url="/manpages/shorewall-interfaces.html">shorewall6-interfaces</ulink>(5)
           file. A <emphasis>host-list</emphasis> is comma-separated list whose
           elements are a host or network address.</para>
 
@@ -1432,7 +1466,7 @@
           role="bold">dynamic_shared</emphasis> zone option (<ulink
           url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5),
           <ulink
-          url="/manpages6/shorewall6-zones.html">shorewall6-zones</ulink>(5))
+          url="/manpages/shorewall-zones.html">shorewall6-zones</ulink>(5))
           allows a single ipset to handle entries for multiple interfaces.
           When that option is specified for a zone, the
           <command>delete</command> command has the alternative syntax in
@@ -1459,7 +1493,7 @@
           command removes any routes added from <ulink
           url="/manpages/shorewall-routes.html">shorewall-routes</ulink>(5)
           (<ulink
-          url="/manpages/shorewall6-routes.html">shorewall6-routes</ulink>(5))and
+          url="/manpages/shorewall-routes.html">shorewall6-routes</ulink>(5))and
           any traffic shaping configuration for the interface.</para>
         </listitem>
       </varlistentry>
@@ -1520,7 +1554,7 @@
           adds any route specified in <ulink
           url="/manpages/shorewall-routes.html">shorewall-routes</ulink>(5)
           (<ulink
-          url="/manpages/shorewall6-routes.html">shorewall6-routes</ulink>(5))
+          url="/manpages/shorewall-routes.html">shorewall6-routes</ulink>(5))
           and installs the interface's traffic shaping configuration, if
           any.</para>
         </listitem>
@@ -1565,7 +1599,7 @@
           given then the file specified by RESTOREFILE in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)) is
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)) is
           assumed.</para>
         </listitem>
       </varlistentry>
@@ -1650,7 +1684,7 @@
           specified by the BLACKLIST_LOGLEVEL setting in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
           This command requires that the firewall be in the started state and
           that DYNAMIC_BLACKLIST=Yes in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf
@@ -1666,7 +1700,7 @@
           <para>Monitors the log file specified by the LOGFILE option in
           <ulink url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5))
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5))
           and produces an audible alarm when new Shorewall messages are
           logged. The <emphasis role="bold">-m</emphasis> option causes the
           MAC address of each packet source to be displayed if that
@@ -1689,7 +1723,7 @@
           specified by the BLACKLIST_LOGLEVEL setting in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5),
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
           This command requires that the firewall be in the started state and
           that DYNAMIC_BLACKLIST=Yes in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf
@@ -1773,63 +1807,6 @@
         </listitem>
       </varlistentry>
 
-      <varlistentry>
-        <term><emphasis role="bold">refresh </emphasis> [-<option>n</option>]
-        [-<option>d</option>] [-<option>T</option>] [-i] [-<option>D
-        </option><replaceable>directory</replaceable> ] [
-        <replaceable>chain</replaceable>... ]</term>
-
-        <listitem>
-          <para>Not available with Shorewall[6]-lite.</para>
-
-          <para>All steps performed by <command>restart</command> are
-          performed by <command>refresh</command> with the exception that
-          <command>refresh</command> only recreates the chains specified in
-          the command while <command>restart</command> recreates the entire
-          Netfilter ruleset. If no <replaceable>chain</replaceable> is given,
-          the static blacklisting chain <emphasis
-          role="bold">blacklst</emphasis> is assumed.</para>
-
-          <para>The listed chains are assumed to be in the filter table. You
-          can refresh chains in other tables by prefixing the chain name with
-          the table name followed by ":" (e.g., nat:net_dnat). Chain names
-          which follow are assumed to be in that table until the end of the
-          list or until an entry in the list names another table. Built-in
-          chains such as FORWARD may not be refreshed.</para>
-
-          <para>The <option>-n</option> option was added in Shorewall 4.5.3
-          causes Shorewall to avoid updating the routing table(s).</para>
-
-          <para>The <option>-d</option> option was added in Shorewall 4.5.3
-          causes the compiler to run under the Perl debugger.</para>
-
-          <para>The <option>-T</option> option was added in Shorewall 4.5.3
-          and causes a Perl stack trace to be included with each
-          compiler-generated error and warning message.</para>
-
-          <para>The <option>-i</option> option was added in Shorewall 4.6.0
-          and causes a warning message to be issued if the current line
-          contains alternative input specifications following a semicolon
-          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
-          set to Yes in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
-
-          <para>The <option>-D</option> option was added in Shorewall 4.5.3
-          and causes Shorewall to look in the given
-          <emphasis>directory</emphasis> first for configuration files.</para>
-
-          <para>Example:<programlisting><command>shorewall refresh net2fw nat:net_dnat</command> #Refresh the 'net2loc' chain in the filter table and the 'net_dnat' chain in the nat table</programlisting></para>
-
-          <para>The <emphasis role="bold">refresh</emphasis> command has
-          slightly different behavior. When no chain name is given to the
-          <emphasis role="bold">refresh</emphasis> command, the mangle table
-          is refreshed along with the blacklist chain (if any). This allows
-          you to modify <filename>/etc/shorewall/tcrules </filename>and
-          install the changes using <emphasis
-          role="bold">refresh</emphasis>.</para>
-        </listitem>
-      </varlistentry>
-
       <varlistentry>
         <term><emphasis role="bold">reject</emphasis><replaceable>
         address</replaceable></term>
@@ -1901,13 +1878,13 @@
                 INLINE_MATCHES is set to Yes in <ulink
                 url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                 (<ulink
-                url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5))..</para>
+                url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5))..</para>
 
                 <para>The <option>-C</option> option was added in Shorewall
                 4.6.5 and is only meaningful when AUTOMAKE=Yes in <ulink
                 url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                 (<ulink
-                url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+                url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
                 If an existing firewall script is used and if that script was
                 the one that generated the current running configuration, then
                 the running netfilter configuration will be reloaded as is so
@@ -1941,6 +1918,57 @@
         </listitem>
       </varlistentry>
 
+      <varlistentry>
+        <term><emphasis role="bold">remote-getcaps</emphasis>
+        [-<option>R</option>] [-<option>r</option>
+        <replaceable>root-user-name</replaceable>] [ [ -D ]
+        <replaceable>directory</replaceable> ] [
+        <replaceable>system</replaceable> ]</term>
+
+        <listitem>
+          <para>Added in Shoreall 5.2.0, this command executes <emphasis
+          role="bold">shorewall[6]-lite show capabilities -f &gt;
+          /var/lib/shorewall[6]-lite/capabilities</emphasis> on the remote
+          <replaceable>system</replaceable> via ssh then the generated file is
+          copied to <replaceable>directory</replaceable> on the local system.
+          If no <replaceable>directory</replaceable> is given, the current
+          working directory is assumed.</para>
+
+          <para>if <emphasis role="bold">-R</emphasis> is included, the remote
+          shorewallrc file is also copied to
+          <replaceable>directory</replaceable>.</para>
+
+          <para>If <option>-r</option> is included, it specifies that the root
+          user on <replaceable>system</replaceable> is named
+          <replaceable>root-user-name</replaceable> rather than "root".</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><emphasis role="bold">remote-getrc</emphasis>
+        [-<option>c</option>] [-<option>r</option>
+        <replaceable>root-user-name</replaceable>] [ [ -D ]
+        <replaceable>directory</replaceable> ] [
+        <replaceable>system</replaceable> ]</term>
+
+        <listitem>
+          <para>Added in Shoreall 5.2.0, this command copies the shorewallrc
+          file from the remote <replaceable>system</replaceable> to
+          <replaceable>directory</replaceable> on the local system. If no
+          <replaceable>directory</replaceable> is given, the current working
+          directory is assumed.</para>
+
+          <para>if <emphasis role="bold">-c</emphasis> is included, the remote
+          capabilities are also copied to
+          <replaceable>directory</replaceable>, as is done by the
+          <command>remote-getcaps</command> command.</para>
+
+          <para>If <option>-r</option> is included, it specifies that the root
+          user on <replaceable>system</replaceable> is named
+          <replaceable>root-user-name</replaceable> rather than "root".</para>
+        </listitem>
+      </varlistentry>
+
       <varlistentry>
         <term><emphasis role="bold">remote-start</emphasis>
         [-<option>n</option>] [-<option>s</option>] [-<option>c</option>]
@@ -1978,7 +2006,7 @@
           <replaceable>system</replaceable> is omitted, then the FIREWALL
           option setting in <ulink
           url="shorewall.conf.html">shorewall.conf</ulink>(5) (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf(5)</ulink>) is
+          url="/manpages/shorewall.conf.html">shorewall6.conf(5)</ulink>) is
           assumed. In that case, if you want to specify a
           <replaceable>directory</replaceable>, then the <option>-D</option>
           option must be given.</para>
@@ -1992,9 +2020,9 @@
           role="bold">shorewall-lite save</emphasis> via ssh.</para>
 
           <para>if <emphasis role="bold">-c</emphasis> is included, the
-          command <emphasis role="bold">shorewall-lite show capabilities -f
+          command <emphasis role="bold">shorewall[6]-lite show capabilities -f
-          &gt; /var/lib/shorewall-lite/capabilities</emphasis> is executed via
+          &gt; /var/lib/shorewall[6]-lite/capabilities</emphasis> is executed
-          ssh then the generated file is copied to
+          via ssh then the generated file is copied to
           <replaceable>directory</replaceable> using scp. This step is
           performed before the configuration is compiled.</para>
 
@@ -2005,13 +2033,6 @@
           <para>The <option>-T</option> option was added in Shorewall 4.5.3
           and causes a Perl stack trace to be included with each
           compiler-generated error and warning message.</para>
-
-          <para>The <option>-i</option> option was added in Shorewall 4.6.0
-          and causes a warning message to be issued if the current line
-          contains alternative input specifications following a semicolon
-          (";"). Such lines will be handled incorrectly if INLINE_MATCHES is
-          set to Yes in <ulink
-          url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
         </listitem>
       </varlistentry>
 
@@ -2050,8 +2071,8 @@
           Beginning with Shorewall 5.0.13, if
           <replaceable>system</replaceable> is omitted, then the FIREWALL
           option setting in <ulink
-          url="shorewall6.conf.html">shorewall6.conf(5)</ulink> (<ulink
+          url="/manpages/shorewall.conf.html">shorewall6.conf(5)</ulink> (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)) is
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)) is
           assumed. In that case, if you want to specify a
           <replaceable>directory</replaceable>, then the <option>-D</option>
           option must be given.</para>
@@ -2083,7 +2104,7 @@
           set to Yes in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
         </listitem>
       </varlistentry>
 
@@ -2123,8 +2144,8 @@
           Beginning with Shorewall 5.0.13, if
           <replaceable>system</replaceable> is omitted, then the FIREWALL
           option setting in <ulink
-          url="shorewall6.conf.html">shorewall6.conf(5)</ulink> (<ulink
+          url="/manpages/shorewall.conf.html">shorewall6.conf(5)</ulink> (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)) is
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)) is
           assumed. In that case, if you want to specify a
           <replaceable>directory</replaceable>, then the <option>-D</option>
           option must be given.</para>
@@ -2156,7 +2177,7 @@
           set to Yes in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5).</para>
         </listitem>
       </varlistentry>
 
@@ -2283,7 +2304,7 @@
           restored from the file specified by the RESTOREFILE option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
 
           <caution>
             <para>If your iptables ruleset depends on variables that are
@@ -2430,16 +2451,16 @@
         <replaceable>filename</replaceable> ]</term>
 
         <listitem>
-          <para>The dynamic blacklist is stored in /var/lib/shorewall/save.
+          <para>Creates a snapshot of the currently running firewall. The
-          The state of the firewall is stored in
+          dynamic blacklist is stored in /var/lib/shorewall/save. The state of
+          the firewall is stored in
           /var/lib/shorewall/<emphasis>filename</emphasis> for use by the
-          <emphasis role="bold">shorewall restore</emphasis> and <emphasis
+          <emphasis role="bold">shorewall restore</emphasis> command. If
-          role="bold">shorewall -f start</emphasis> commands. If
           <emphasis>filename</emphasis> is not given then the state is saved
           in the file specified by the RESTOREFILE option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
 
           <para>The <option>-C</option> option, added in Shorewall 4.6.5,
           causes the iptables packet and byte counters to be saved along with
@@ -2456,7 +2477,7 @@
           the SAVE_IPSETS option in <ulink
           url="/manpages/shorewall.conf.html">shorewall.conf</ulink> (5)
           (<ulink
-          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+          url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
           This command may be used to proactively save your ipset contents in
           the event that a system failure occurs prior to issuing a
           <command>stop</command> command.</para>
@@ -2624,7 +2645,7 @@
                 accounting counters (<ulink
                 url="/manpages/shorewall-accounting.html">shorewall-accounting</ulink>
                 (5), <ulink
-                url="/manpages6/shorewall6-accounting.html">shorewall6-accounting</ulink>(5)).</para>
+                url="/manpages/shorewall-accounting.html">shorewall6-accounting</ulink>(5)).</para>
               </listitem>
             </varlistentry>
 
@@ -2648,7 +2669,7 @@
                 file specified by the LOGFILE option in <ulink
                 url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                 (<ulink
-                url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+                url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
                 The <emphasis role="bold">-m</emphasis> option causes the MAC
                 address of each packet source to be displayed if that
                 information is available.</para>
@@ -2737,6 +2758,15 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term><emphasis role="bold">rc</emphasis></term>
+
+              <listitem>
+                <para>Added in Shorewall 5.2.0. Displays the contents of
+                $SHAREDIR/shorewall/shorewallrc.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term>[-<option>c</option>]<emphasis role="bold">
               routing</emphasis></term>
@@ -2762,6 +2792,20 @@
               </listitem>
             </varlistentry>
 
+            <varlistentry>
+              <term>saves</term>
+
+              <listitem>
+                <para>Added in Shorewall 5.2.0. Lists snapshots created by the
+                <command>save</command> command. Each snapshot is listed with
+                the date and time when it was taken. If there is a snapshot
+                with the name specified in the RESTOREFILE option in <ulink
+                url="shorewall.conf.html">shorewall.conf(5</ulink>), that
+                snapshot is listed as the <emphasis>default</emphasis>
+                snapshot for the <command>restore</command> command.</para>
+              </listitem>
+            </varlistentry>
+
             <varlistentry>
               <term><emphasis role="bold">tc</emphasis></term>
 
@@ -2807,7 +2851,7 @@
                   in <ulink
                   url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                   (<ulink
-                  url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5))
+                  url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5))
                   will be restored if that saved configuration exists and has
                   been modified more recently than the files in
                   /etc/shorewall. When <emphasis role="bold">-f</emphasis> is
@@ -2818,7 +2862,7 @@
                   option was added to <ulink
                   url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                   (<ulink
-                  url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+                  url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
                   When LEGACY_FASTSTART=No, the modification times of files in
                   /etc/shorewall are compared with that of
                   /var/lib/shorewall/firewall (the compiled script that last
@@ -2837,7 +2881,7 @@
                   overriding the AUTOMAKE setting in <ulink
                   url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)
                   (<ulink
-                  url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).
+                  url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).
                   When both <option>-f</option> and <option>-c</option>are
                   present, the result is determined by the option that appears
                   last.</para>
@@ -2853,7 +2897,7 @@
                   INLINE_MATCHES is set to Yes in <ulink
                   url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>
                   (<ulink
-                  url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink>(5)).</para>
+                  url="/manpages/shorewall.conf.html">shorewall6.conf</ulink>(5)).</para>
 
                   <para>The <option>-C</option> option was added in Shorewall
                   4.6.5 and is only meaningful when the <option>-f</option>
@@ -2921,7 +2965,7 @@
           by the compiled script that executed the last successful <emphasis
           role="bold">start</emphasis>, <emphasis
           role="bold">restart</emphasis> or <emphasis
-          role="bold">refresh</emphasis> command if that script exists.</para>
+          role="bold">reload</emphasis> command if that script exists.</para>
         </listitem>
       </varlistentry>
 
@@ -3172,23 +3216,38 @@
   <refsect1>
     <title>FILES</title>
 
-    <para>/etc/shorewall/</para>
+    <para>/etc/shorewall/*</para>
+
+    <para>/etc/shorewall6/*</para>
   </refsect1>
 
   <refsect1>
     <title>See ALSO</title>
 
-    <para><ulink
+    <simplelist>
-    url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
+      <member><ulink
+      url="/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink>
+      - Describes operational aspects of Shorewall.</member>
 
-    <para>shorewall-accounting(5), shorewall-actions(5),
+      <member><ulink url="shorewall-files.html">shorewall-files(5)</ulink> -
-    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
+      Describes the various configuration files along with features and
-    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
+      conventions common to those files.</member>
-    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
+
-    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
+      <member><ulink url="shorewall-names.html">shorewall-names(5)</ulink> -
-    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
+      Describes naming of objects within a Shorewall configuration.</member>
-    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
+
-    shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
+      <member><ulink
-    shorewall-tunnels(5), shorewall-zones(5)</para>
+      url="shorewall-addresses.html">shorewall-addresses(5)</ulink> -
+      Describes how to specify addresses within a Shorewall
+      configuration.</member>
+
+      <member><ulink
+      url="shorewall-exclusion.html">shorewall-exclusion(5)</ulink> -
+      Describes how to exclude certain hosts and/or networks from matching a
+      rule.</member>
+
+      <member><ulink url="shorewall-nesting.html">shorewall-nesting(5)</ulink>
+      - Describes how to nest one Shorewall zone inside another.</member>
+    </simplelist>
   </refsect1>
 </refentry>

Shorewall-core/shorewall

@@ -1,8 +1,8 @@
 #!/bin/sh
 #
-#     Shorewall Packet Filtering Firewall Control Program - V5.0
+#     Shorewall Packet Filtering Firewall Control Program - V5.2
 #
-#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015 -
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014,2015-2017
 #         Tom Eastep (teastep@shorewall.net)
 #
 #	Shorewall documentation is available at http://www.shorewall.net
@@ -25,6 +25,10 @@
 #       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
 #
 ################################################################################################
+#
+# Default product is Shorewall. PRODUCT will be set based on $0 and on passed -[46] and -l
+# options
+#
 PRODUCT=shorewall
 
 #

Shorewall-core/shorewallrc.alt

@@ -0,0 +1,25 @@
+#
+# ALT/BaseALT/ALTLinux Shorewall 5.2 rc file
+#
+BUILD=                                  #Default is to detect the build system
+HOST=alt
+PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/libexec            #Directory for executable scripts.
+PERLLIBDIR=${SHAREDIR}/perl5            #Directory to install Shorewall Perl module directory
+CONFDIR=/etc                            #Directory where subsystem configurations are installed
+SBINDIR=/sbin                           #Directory where system administration programs are installed
+MANDIR=${SHAREDIR}/man                  #Directory where manpages are installed.
+INITDIR=${CONFDIR}/rc.d/init.d          #Directory where SysV init scripts are installed.
+INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
+INITSOURCE=init.alt.sh                  #Name of the distributed file to be installed as the SysV init script
+ANNOTATED=                              #If non-zero, annotated configuration files are installed
+SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
+SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed
+SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
+SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
+VARLIB=/var/lib                         #Directory where product variable data is stored.
+VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
+DEFAULT_PAGER=/usr/bin/less             #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 5.0 rc file
+# Apple OS X Shorewall 5.2 rc file
 #
 BUILD=apple
 HOST=apple

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 5.0 rc file
+# Arch Linux Shorewall 5.2 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 5.0 rc file
+# Cygwin Shorewall 5.2 rc file
 #
 BUILD=cygwin
 HOST=cygwin

Shorewall-core/shorewallrc.debian.systemd

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.0 rc file
+# Debian Shorewall 5.2 rc file
 #
 BUILD=					#Default is to detect the build system
 HOST=debian
@@ -13,9 +13,9 @@ MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
 INITDIR=				#Directory where SysV init scripts are installed.
 INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
-ANNOTATED=				#If non-zero, annotated configuration files are installed
+ANNOTATED=				#If non-empty, annotated configuration files are installed
-SYSCONFFILE=default.debian.systemd		#Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFFILE=default.debian.systemd	#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+SERVICEFILE=$PRODUCT.service.debian	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR

Shorewall-core/shorewallrc.debian.sysvinit

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.0 rc file
+# Debian Shorewall 5.2 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=debian

Shorewall-core/shorewallrc.default

@@ -1,5 +1,5 @@
 #
-# Default Shorewall 5.0 rc file
+# Default Shorewall 5.2 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=linux                              #Generic Linux

Shorewall-core/shorewallrc.openwrt

@@ -1,5 +1,5 @@
 #
-# OpenWRT Shorewall 5.0 rc file
+# OpenWRT/LEDE Shorewall 5.2 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=openwrt

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 5.0 rc file
+# RedHat/FedoraShorewall 5.2 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat

Shorewall-core/shorewallrc.sandbox

@@ -0,0 +1,28 @@
+#
+# Shorewall 5.2 rc file for installing into a Sandbox
+#
+BUILD=                                       # Default is to detect the build system
+HOST=linux
+INSTALLDIR=				     # Set this to the directory where you want Shorewall installed
+PREFIX=${INSTALLDIR}/usr		     # Top-level directory for shared files, libraries, etc.
+SHAREDIR=${PREFIX}/share		     # Directory for arch-neutral files.
+LIBEXECDIR=${PREFIX}/share		     # Directory for executable scripts.	
+PERLLIBDIR=${PREFIX}/share/shorewall	     # Directory to install Shorewall Perl module directory	
+CONFDIR=${INSTALLDIR}/etc		     # Directory where subsystem configurations are installed				
+SBINDIR=${INSTALLDIR}/sbin		     # Directory where system administration programs are installed			
+MANDIR=		     			     # Leave empty
+INITDIR=				     # Leave empty				     				
+INITSOURCE=				     # Leave empty
+INITFILE=				     # Leave empty
+AUXINITSOURCE=				     # Leave empty
+AUXINITFILE=				     # Leave empty
+SERVICEDIR=				     # Leave empty
+SERVICEFILE=    			     # Leave empty
+SYSCONFFILE=				     # Leave empty
+SYSCONFDIR=				     # Leave empty			
+SPARSE=					     # Leave empty			
+ANNOTATED=				     # If non-empty, annotated configuration files are installed				
+VARLIB=${INSTALLDIR}/var/lib		     # Directory where product variable data is stored.				
+VARDIR=${VARLIB}/$PRODUCT		     # Directory where product variable data is stored.		
+DEFAULT_PAGER=/usr/bin/less		     # Pager to use if none specified in shorewall[6].conf
+SANDBOX=Yes				     # Indicates SANDBOX installation

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 5.0 rc file
+# Slackware Shorewall 5.2 rc file
 #
 BUILD=slackware
 HOST=slackware

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 5.0 rc file
+# SuSE Shorewall 5.2 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse

Shorewall-core/wait4ifup

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall interface helper utility - V4.2
+#     Shorewall interface helper utility - V5.2
 #
 #     (c) 2007,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-init/init.alt.sh

@@ -0,0 +1,150 @@
+#!/bin/sh
+#
+# Shorewall init script
+#
+# chkconfig: - 09 91
+# description: Initialize the shorewall firewall at boot time
+#
+### BEGIN INIT INFO
+# Provides: shorewall-init
+# Required-Start: $local_fs
+# Required-Stop: $local_fs
+# Default-Start: 3 4 5
+# Default-Stop:  0 1 2 6
+# Short-Description: Initialize the shorewall firewall at boot time
+# Description:       Place the firewall in a safe state at boot time
+#                    prior to bringing up the network.
+### END INIT INFO
+
+# Do not load RH compatibility interface.
+WITHOUT_RC_COMPAT=1
+
+# Source function library.
+. /etc/init.d/functions
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+NAME="Shorewall-init firewall"
+PROG="shorewall-init"
+SHOREWALL="$SBINDIR/$PROG"
+LOGGER="logger -i -t $PROG"
+
+# Get startup options (override default)
+OPTIONS=
+
+LOCKFILE=/var/lock/subsys/shorewall-init
+
+# check if shorewall-init is configured or not
+if [ -f "/etc/sysconfig/shorewall-init" ]; then
+	. /etc/sysconfig/shorewall-init
+	if [ -z "$PRODUCTS" ]; then
+		echo "No PRODUCTS configured"
+		exit 6
+	fi
+else
+	echo "/etc/sysconfig/shorewall-init not found"
+	exit 6
+fi
+
+RETVAL=0
+
+# set the STATEDIR variable
+setstatedir() {
+	local statedir
+	if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
+		statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
+	fi
+
+	[ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
+
+	if [ -x ${STATEDIR}/firewall ]; then
+		return 0
+	elif [ $PRODUCT = shorewall ]; then
+		${SBINDIR}/shorewall compile
+	elif [ $PRODUCT = shorewall6 ]; then
+		${SBINDIR}/shorewall -6 compile
+	else
+		return 1
+	fi
+}
+
+start() {
+	local PRODUCT
+	local STATEDIR
+
+	printf "Initializing \"Shorewall-based firewalls\": "
+
+	for PRODUCT in $PRODUCTS; do
+		if setstatedir; then
+			$STATEDIR/$PRODUCT/firewall ${OPTIONS} stop 2>&1 | "$LOGGER"
+			RETVAL=$?
+		else
+			RETVAL=6
+			break
+		fi
+	done
+
+	if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+		ipset -R < "$SAVE_IPSETS"
+	fi
+
+	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
+	return $RETVAL
+}
+
+stop() {
+	local PRODUCT
+	local STATEDIR
+
+	printf "Clearing \"Shorewall-based firewalls\": "
+	for PRODUCT in $PRODUCTS; do
+		if setstatedir; then
+			${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | "$LOGGER"
+			RETVAL=$?
+		else
+			RETVAL=6
+			break
+		fi
+	done
+
+	if [ -n "$SAVE_IPSETS" ]; then
+		mkdir -p $(dirname "$SAVE_IPSETS")
+		if ipset -S > "${SAVE_IPSETS}.tmp"; then
+			grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+		else
+			rm -f "${SAVE_IPSETS}.tmp"
+		fi
+	fi
+
+	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
+	return $RETVAL
+}
+
+# See how we were called.
+case "$1" in
+	start)
+	    start
+	    ;;
+	stop)
+	    stop
+	    ;;
+	restart|reload|condrestart|condreload)
+	    # "Not implemented"
+	    ;;
+	condstop)
+	    if [ -e "$LOCKFILE" ]; then
+		stop
+	    fi
+	    ;;
+	status)
+	    status "$PROG"
+	     RETVAL=$?
+	    ;;
+	*)
+	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|condrestart|condstop|status}"
+	    RETVAL=1
+esac
+
+exit $RETVAL

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -73,12 +73,16 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
-	${SBINDIR}/shorewall compile
+        return 0
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+        if [ $PRODUCT = shorewall ]; then
+            ${SBINDIR}/shorewall compile
+        elif [ $PRODUCT = shorewall6 ]; then
+            ${SBINDIR}/shorewall -6 compile
+        else
+            return 1
+        fi
     fi
 }
 
@@ -108,16 +112,14 @@ shorewall_start () {
 
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
+          #
-              #
+	  # Run in a sub-shell to avoid name collisions
-	      # Run in a sub-shell to avoid name collisions
+	  #
-	      #
+	  (
-	      (
+	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
-		      ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
-		  fi
+	  )
-	      )
-	  fi
       fi
   done
 
@@ -145,9 +147,7 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
       fi
   done
 
@@ -159,8 +159,9 @@ shorewall_stop () {
 
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
       else
+	  rm -f "${SAVE_IPSETS}.tmp"
 	  echo_notdone
       fi
 

Shorewall-init/init.fedora.sh

@@ -44,12 +44,14 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+	return 1
     fi
 }
 
@@ -66,20 +68,20 @@ start () {
 
     printf "Initializing \"Shorewall-based firewalls\": "
 
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
+
     for PRODUCT in $PRODUCTS; do
 	setstatedir
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    if [ -x "${STATEDIR}/firewall" ]; then
+	    ${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
-		${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
+	    retval=${PIPESTATUS[0]}
-		retval=${PIPESTATUS[0]}
+	    [ $retval -ne 0 ] && break
-		[ $retval -ne 0 ] && break
-	    else
-		retval=6 #Product not configured
-		break
-	    fi
 	else
+	    retval=6 #Product not configured
 	    break
 	fi
     done
@@ -106,20 +108,25 @@ stop () {
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    if [ -x "${STATEDIR}/firewall" ]; then
+	    ${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
-		${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
+	    retval=${PIPESTATUS[0]}
-		retval=${PIPESTATUS[0]}
+	    [ $retval -ne 0 ] && break
-		[ $retval -ne 0 ] && break
-	    else
-		retval=6 #Product not configured
-		break
-	    fi
 	else
+	    retval=6 #Product not configured
 	    break
 	fi
     done
 
     if [ $retval -eq 0 ]; then
+	if [ -n "$SAVE_IPSETS" ]; then
+	    mkdir -p $(dirname "$SAVE_IPSETS")
+	    if ipset -S > "${SAVE_IPSETS}.tmp"; then
+		grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	    else
+		rm -f "${SAVE_IPSETS}.tmp"
+	    fi
+	fi
+
 	rm -f $lockfile
 	success
     else

Shorewall-init/init.openwrt.sh

@@ -1,5 +1,5 @@
 #!/bin/sh /etc/rc.common
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
@@ -75,12 +75,14 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+	return 1
     fi
 }
 
@@ -92,10 +94,8 @@ start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      ${STATEDIR}/firewall ${OPTIONS} stop
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
 	  fi
       fi
   done
@@ -103,6 +103,8 @@ start () {
   if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
       ipset -R < "$SAVE_IPSETS"
   fi
+
+  return 0
 }
 
 boot () {
@@ -117,17 +119,19 @@ stop () {
     printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
+	    ${STATEDIR}/firewall ${OPTIONS} clear
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
 	fi
     fi
+
+    return 0
 }
 

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -69,10 +69,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
     else
-	return 0
+	return 1
     fi
 }
 
@@ -84,10 +86,8 @@ shorewall_start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      ${STATEDIR}/firewall ${OPTIONS} stop
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
 	  fi
       fi
   done
@@ -107,16 +107,16 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
       fi
   fi
 

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -79,12 +79,14 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+	return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
     else
-	return 0
+	return 6
     fi
 }
 
@@ -96,10 +98,8 @@ shorewall_start () {
   printf "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x $STATEDIR/firewall ]; then
+	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
-		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
-	      fi
 	  fi
       fi
   done
@@ -117,16 +117,16 @@ shorewall_stop () {
   printf "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if [ -x ${STATEDIR}/firewall ]; then
+	  ${STATEDIR}/firewall ${OPTIONS} clear
-	      ${STATEDIR}/firewall ${OPTIONS} clear
-	  fi
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+      else
+	  rm -f "${SAVE_IPSETS}.tmp"
       fi
   fi
 }

Shorewall-init/install.sh

@@ -181,6 +181,9 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
+		    alt|basealt|altlinux)
+			BUILD=alt
+			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -191,6 +194,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
+	    elif [ -f /etc/altlinux-release ]; then
+		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/SuSE-release ]; then
@@ -253,6 +258,9 @@ case "$HOST" in
     openwrt)
 	echo "Installing Openwrt-specific configuration..."
 	;;
+    alt)
+	echo "Installing ALT-specific configuration...";
+	;;
     linux)
 	fatal_error "Shorewall-init is not supported on this system"
 	;;

Shorewall-init/shorewall-init

@@ -1,5 +1,5 @@
 #!/bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -33,12 +33,12 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ $PRODUCT = shorewall ]; then
+    if [ -x ${STATEDIR}/firewall ]; then
+        return 0
+    elif [ $PRODUCT = shorewall ]; then
 	${SBINDIR}/shorewall compile
     elif [ $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/shorewall -6 compile
-    else
-	return 0
     fi
 }
 
@@ -67,16 +67,14 @@ shorewall_start () {
     printf "Initializing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
+	    #
-		#
+	    # Run in a sub-shell to avoid name collisions
-		# Run in a sub-shell to avoid name collisions
+	    #
-		#
+	    (
-		(
+		if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		    ${STATEDIR}/firewall ${OPTIONS} stop
-			${STATEDIR}/firewall ${OPTIONS} stop
+		fi
-		    fi
+	    )
-		)
-	    fi
 	fi
     done
 
@@ -95,16 +93,16 @@ shorewall_stop () {
     printf "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    if [ -x ${STATEDIR}/firewall ]; then
+	    ${STATEDIR}/firewall ${OPTIONS} clear
-		${STATEDIR}/firewall ${OPTIONS} clear
-	    fi
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	else
+	    rm -f "${SAVE_IPSETS}.tmp"
 	fi
     fi
 

Shorewall-lite/init.alt.sh

@@ -0,0 +1,117 @@
+#!/bin/sh
+#
+# Shorewall-Lite init script
+#
+# chkconfig: - 28 90
+# description: Packet filtering firewall
+#
+### BEGIN INIT INFO
+# Provides: shorewall-lite
+# Required-Start: $local_fs $remote_fs $syslog $network
+# Should-Start: $time $named
+# Required-Stop:
+# Default-Start: 3 4 5
+# Default-Stop:  0 1 2 6
+# Short-Description: Packet filtering firewall
+# Description: The Shoreline Firewall, more commonly known as "Shorewall", is a
+#              Netfilter (iptables) based firewall
+### END INIT INFO
+
+# Do not load RH compatibility interface.
+WITHOUT_RC_COMPAT=1
+
+# Source function library.
+. /etc/init.d/functions
+
+#
+# The installer may alter this
+#
+. /usr/share/shorewall/shorewallrc
+
+NAME="Shorewall-Lite firewall"
+PROG="shorewall"
+SHOREWALL="$SBINDIR/$PROG -l"
+LOGGER="logger -i -t $PROG"
+
+# Get startup options (override default)
+OPTIONS=
+
+SourceIfNotEmpty $SYSCONFDIR/${PROG}-lite
+
+LOCKFILE="/var/lock/subsys/${PROG}-lite"
+RETVAL=0
+
+start() {
+	action $"Applying $NAME rules:" "$SHOREWALL" "$OPTIONS" start "$STARTOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
+	return $RETVAL
+}
+
+stop() {
+	action $"Stoping $NAME :" "$SHOREWALL" "$OPTIONS" stop "$STOPOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
+	return $RETVAL
+}
+
+restart() {
+	action $"Restarting $NAME rules: " "$SHOREWALL" "$OPTIONS" restart "$RESTARTOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	return $RETVAL
+}
+
+reload() {
+	action $"Reloadinging $NAME rules: " "$SHOREWALL" "$OPTIONS" reload "$RELOADOPTIONS" 2>&1 | "$LOGGER"
+	RETVAL=$?
+	return $RETVAL
+}
+
+clear() {
+	action $"Clearing $NAME rules: " "$SHOREWALL" "$OPTIONS" clear 2>&1 | "$LOGGER"
+	RETVAL=$?
+	return $RETVAL
+}
+
+# See how we were called.
+case "$1" in
+	start)
+	    start
+	    ;;
+	stop)
+	    stop
+	    ;;
+	restart)
+	    restart
+	    ;;
+	reload)
+	    reload
+	    ;;
+	clear)
+	    clear
+	    ;;
+	condrestart)
+	    if [ -e "$LOCKFILE" ]; then
+		restart
+	    fi
+	    ;;
+	condreload)
+	    if [ -e "$LOCKFILE" ]; then
+		restart
+	    fi
+	    ;;
+	condstop)
+	    if [ -e "$LOCKFILE" ]; then
+		stop
+	    fi
+	    ;;
+	status)
+	    "$SHOREWALL" status
+	     RETVAL=$?
+	    ;;
+	*)
+	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|clear|condrestart|condstop|status}"
+	    RETVAL=1
+esac
+
+exit $RETVAL

Shorewall-lite/init.openwrt.sh

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)

Shorewall-lite/init.sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 RCDLINKS="2,S41 3,S41 6,K41"
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-lite/init.suse.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall-lite/install.sh

@@ -190,6 +190,9 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
+		    alt|basealt|altlinux)
+			BUILD=alt
+			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -198,6 +201,8 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
+	    elif [ -f /etc/altlinux-release ]; then
+		BUILD=alt
 	    elif [ -f ${CONFDIR}/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f ${CONFDIR}/SuSE-release ]; then
@@ -266,6 +271,9 @@ case "$HOST" in
     openwrt)
 	echo "Installing OpenWRT-specific configuration..."
 	;;
+    alt)
+	echo "Installing ALT-specific configuration...";
+	;;
     linux)
 	;;
     *)
@@ -418,6 +426,11 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 if [ -f modules ]; then
     install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
     echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
+
+    for f in modules.*; do
+	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+    done
 fi
 
 if [ -f helpers ]; then
@@ -425,11 +438,6 @@ if [ -f helpers ]; then
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
-for f in modules.*; do
-    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-    echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
-done
-
 #
 # Install the Man Pages
 #

Shorewall-lite/lib.base

@@ -1,5 +1,5 @@
 #
-# Shorewall 4.4 -- /usr/share/shorewall-lite/lib.base
+# Shorewall 5.2 -- /usr/share/shorewall-lite/lib.base
 #
 #     (c) 2011,2014 - Tom Eastep (teastep@shorewall.net)
 #

Shorewall-lite/shorecap

@@ -28,7 +28,7 @@
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,7 +38,6 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
-#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not

Shorewall-lite/uninstall.sh

@@ -151,7 +151,7 @@ fi
 
 remove_file ${SBINDIR}/$PRODUCT
 
-if [ -L ${SHAREDIR}/$PRODUCT/init ]; then
+if [ -h ${SHAREDIR}/$PRODUCT/init ]; then
     if [ $HOST = openwrt ]; then
 	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
 	    /etc/init.d/$PRODUCT disable

Shorewall/Actions/action.A_AllowICMPs.deprecated

@@ -1,9 +0,0 @@
-#
-# Shorewall6 -- /usr/share/shorewall/action.A_AllowICMPs
-#
-# This action A_ACCEPTs needed ICMP types
-#
-###############################################################################
-#ACTION		SOURCE		DEST	PROTO		DPORT
-
-AllowICMPs(A_ACCEPT)

Shorewall/Actions/action.A_Drop.deprecated

@@ -1,57 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.A_Drop
-#
-# The audited default DROP common rules
-#
-# This action is invoked before a DROP policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-#
-?require AUDIT_TARGET
-?warning "You are using the deprecated A_Drop default action. Please see http://www.shorewall.net/Actions.html
-###############################################################################
-#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
-#
-# Count packets that come through here
-#
-COUNT
-#
-# Special Handling for Auth
-#
-Auth(A_DROP)
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before broadcast Drop.
-#
-A_AllowICMPs	-	-	icmp
-#
-# Don't log broadcasts and multicasts
-#
-dropBcast(audit)
-dropMcast(audit)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log.
-#
-dropInvalid(audit)
-#
-# Drop Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(A_DROP)
-A_DropUPnP
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-dropNotSyn(audit)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-A_DropDNSrep

Shorewall/Actions/action.A_REJECT

@@ -1,11 +1,11 @@
 #
-# Shorewall -- /usr/share/shorewall/action.A_REJECTWITH
+# Shorewall -- /usr/share/shorewall/action.A_REJECT
 #
 # A_REJECT Action.
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.A_REJECT!

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.A_Reject.deprecated

@@ -1,54 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.A_Reject
-#
-# The audited default REJECT action common rules
-#
-# This action is invoked before a REJECT policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-?require AUDIT_TARGET
-?warning "You are using the deprecated A_REJECT default action. Please see http://www.shorewall.net/Actions.html
-###############################################################################
-#ACTION		SOURCE	DEST	PROTO
-#
-# Count packets that come through here
-#
-COUNT
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before broadcast Drop.
-#
-A_AllowICMPs	-	-	icmp
-#
-# Drop Broadcasts and multicasts so they don't clutter up the log
-# (these must *not* be rejected).
-#
-dropBcast(audit)
-dropMcast(audit)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log (these ICMPs cannot be
-# rejected).
-#
-dropInvalid(audit)
-#
-# Reject Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(A_REJECT)
-A_DropUPnP
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-dropNotSyn(audit)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-A_DropDNSrep

Shorewall/Actions/action.AllowICMPs

@@ -13,7 +13,6 @@ DEFAULTS ACCEPT
     @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
 ?else
 ?COMMENT Needed ICMP types (RFC4890)
-
     @1	-		-	ipv6-icmp	destination-unreachable
     @1	-		-	ipv6-icmp	packet-too-big
     @1	-		-	ipv6-icmp	time-exceeded
@@ -38,7 +37,7 @@ DEFAULTS ACCEPT
     @1	-		-	ipv6-icmp	148	# Certificate path solicitation
     @1	-		-	ipv6-icmp	149	# Certificate path advertisement
 
-# The following should have a link local source address and a ttl of 1 and must be allowed to transit abridge
+# The following should have a link local source address and a ttl of 1 and must be allowed to transit a bridge
     @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
     @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
     @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination

Shorewall/Actions/action.Broadcast

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.DNSAmp

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Drop.deprecated

@@ -1,84 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Drop
-#
-# The former default DROP common rules. Use of this action is now deprecated
-#
-# This action is invoked before a DROP policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# The action accepts six optional parameters:
-#
-# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
-#     actions.
-# 2 - Action to take with Auth requests. Default is to do nothing special
-#     with them.
-# 3 - Action to take with SMB requests. Default is DROP or A_DROP,
-#     depending on the setting of the first parameter.
-# 4 - Action to take with required ICMP packets. Default is ACCEPT or
-#     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late DNS replies (UDP source port 53). Default
-#     is DROP or A_DROP depending on the first parameter.
-# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
-#     depending on the first parameter.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-#
-###############################################################################
-?warning "You are using the deprecated Drop default action. Please see http://www.shorewall.net/Actions.html#Default"
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-DEFAULTS -,-,A_DROP,A_ACCEPT,A_DROP,A_DROP
-    ?else
-        ?error The first parameter to Drop must be 'audit' or '-'
-    ?endif
-?else
-DEFAULTS -,-,DROP,ACCEPT,DROP,DROP
-?endif
-
-#ACTION		SOURCE	DEST	PROTO	DPORT	SPORT
-#
-# Count packets that come through here
-#
-COUNT
-#
-# Special Handling for Auth
-#
-?if passed(@2)
-Auth(@2)
-?endif
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before silent broadcast Drop.
-#
-AllowICMPs(@4)	-	-	icmp
-#
-# Don't log broadcasts or multicasts
-#
-Broadcast(DROP,@1)
-Multicast(DROP,@1)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log.
-#
-Invalid(DROP,@1)
-#
-# Drop Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(@3)
-DropUPnP(@6)
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-NotSyn(DROP,@1)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-DropDNSrep(@5)

Shorewall/Actions/action.Established

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.FIN

@@ -0,0 +1,33 @@
+#
+# Shorewall -- /usr/share/shorewall/action.FIN
+#
+# FIN Action
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# FIN[([<action>])]
+#
+# Default action is ACCEPT
+#
+###############################################################################
+
+DEFAULTS ACCEPT,-
+
+@1	 -	-	;;+ -p 6 --tcp-flags ACK,FIN ACK,FIN

Shorewall/Actions/action.IfEvent

@@ -107,6 +107,11 @@ if ( $command & $REAP_OPT ) {
 
 $duration .= '--rttl ' if $command & $TTL_OPT;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "-m recent --rcheck ${duration}--hitcount $hitcount" );
+    $action = 'ACCEPT';
+}
+
 if ( $command & $RESET_CMD ) {
     require_capability 'MARK_ANYWHERE', '"reset"', 's';
 
@@ -130,7 +135,7 @@ if ( $command & $RESET_CMD ) {
     #
     # if the event is armed, remove it and perform the action
     #
-    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event" );
+    perl_action_helper( $action , "-m mark --mark $mark/$mark -m recent --remove --name $event $srcdst" );
 } elsif ( $command & $UPDATE_CMD ) {
     perl_action_helper( $action, "-m recent --update ${duration}--hitcount $hitcount --name $event $srcdst" );
 } else {

Shorewall/Actions/action.Invalid

@@ -4,7 +4,7 @@
 # Invalid Action
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Multicast

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.New

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.NotSyn

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.RST

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2012-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2012-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.Reject.deprecated

@@ -1,85 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Reject
-#
-# The former default REJECT action common rules. Use of this action is deprecated.
-#
-# This action is invoked before a REJECT policy is enforced. The purpose
-# of the action is:
-#
-# a) Avoid logging lots of useless cruft.
-# b) Ensure that certain ICMP packets that are necessary for successful
-#    internet operation are always ACCEPTed.
-#
-# The action accepts six optional parameters:
-#
-# 1 - 'audit' or '-'. Default is '-' which means don't audit in builtin
-#     actions.
-# 2 - Action to take with Auth requests. Default is to do nothing
-#     special with them.
-# 3 - Action to take with SMB requests. Default is REJECT or A_REJECT,
-#     depending on the setting of the first parameter.
-# 4 - Action to take with required ICMP packets. Default is ACCEPT or
-#     A_ACCEPT depending on the first parameter.
-# 5 - Action to take with late DNS replies (UDP source port 53). Default
-#     is DROP or A_DROP depending on the first parameter.
-# 6 - Action to take with UPnP packets. Default is DROP or A_DROP
-#     depending on the first parameter.
-#
-# IF YOU ARE HAVING CONNECTION PROBLEMS, CHANGING THIS FILE WON'T HELP!!!!!!!!!
-###############################################################################
-?warning "You are using the deprecated Reject default action. Please see http://www.shorewall.net/Actions.html#Default"
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-DEFAULTS -,-,A_REJECT,A_ACCEPT,A_DROP,A_DROP
-    ?else
-	?error The first parameter to Reject must be 'audit' or '-'
-    ?endif
-?else
-DEFAULTS -,-,REJECT,ACCEPT,DROP,DROP
-?endif
-
-#ACTION		SOURCE	DEST	PROTO
-#
-# Count packets that come through here
-#
-COUNT
-#
-# Special handling for Auth
-#
-?if passed(@2)
-Auth(@2)
-?endif
-#
-# ACCEPT critical ICMP types
-#
-# For IPv6 connectivity ipv6-icmp broadcasting is required so
-# AllowICMPs must be before silent broadcast Drop.
-#
-AllowICMPs(@4)	-	-	icmp
-#
-# Drop Broadcasts so they don't clutter up the log
-# (broadcasts must *not* be rejected).
-#
-Broadcast(DROP,@1)
-Multicast(DROP,@1)
-#
-# Drop packets that are in the INVALID state -- these are usually ICMP packets
-# and just confuse people when they appear in the log (these ICMPs cannot be
-# rejected).
-#
-Invalid(DROP,@1)
-#
-# Reject Microsoft noise so that it doesn't clutter up the log.
-#
-SMB(@3)
-DropUPnP(@6)
-#
-# Drop 'newnotsyn' traffic so that it doesn't get logged.
-#
-NotSyn(DROP,@1)	-	-	tcp
-#
-# Drop late-arriving DNS replies. These are just a nuisance and clutter up
-# the log.
-#
-DropDNSrep(@5)

Shorewall/Actions/action.Related

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.ResetEvent

@@ -41,6 +41,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "" );
+    $action = 'ACCEPT';
+}
+
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --remove --rdest" );
 } else {

Shorewall/Actions/action.SetEvent

@@ -37,6 +37,11 @@ fatal_error "Invalid Src or Dest ($destination)" unless $destination =~ /^(?:src
 set_action_disposition( $disposition) if supplied $disposition;
 set_action_name_to_caller;
 
+if ( ( $targets{$action} || 0 ) & NATRULE ) {
+    perl_action_helper( "${action}-", "" );
+    $action = 'ACCEPT';
+}
+
 if ( $destination eq 'dst' ) {
     perl_action_helper( $action, '', '', "-m recent --name $event --set --rdest" );
 } else {

Shorewall/Actions/action.TCPFlags

@@ -26,4 +26,4 @@ $tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL FIN,URG,PSH
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags ALL NONE
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,RST SYN,RST
 $tcpflags_action	-	-	;;+ -p 6 --tcp-flags SYN,FIN SYN,FIN
-$tcpflags_action	-	-	;;+ -p tcp --syn --sport 0
+$tcpflags_action	-	-	;;+ -p 6 --syn --sport 0

Shorewall/Actions/action.Untracked

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.allowInvalid

@@ -3,7 +3,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Actions/action.dropBcasts

@@ -0,0 +1,39 @@
+#
+# Shorewall -- /usr/share/shorewall/action.dropBcasts
+#
+# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
+#
+# (c) 2017 Tom Eastep (teastep@shorewall.net)
+#
+# Complete documentation is available at http://shorewall.net
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of Version 2 of the GNU General Public License
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# dropBcasts[([audit])]
+#
+###############################################################################
+
+DEFAULTS -
+
+?if passed(@1)
+    ?if @1 eq 'audit'
+	?require AUDIT_TARGET
+	Broadcast(A_DROP)
+    ?else
+	?error "Invalid argument (@1) to dropBcasts"
+    ?endif
+?else
+    Broadcast(DROP)
+?endif
+

Shorewall/Actions/action.dropInvalid

@@ -5,7 +5,7 @@
 #
 # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-# (c) 2011-2016 Tom Eastep (teastep@shorewall.net)
+# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
 #
 # Complete documentation is available at http://shorewall.net
 #

Shorewall/Contrib/swping

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall WAN Interface monitor - V4.4
+#     Shorewall WAN Interface monitor - V5.2
 #
 #     Inspired by Angsuman Chakraborty's gwping script.
 #

Shorewall/Contrib/swping.init

@@ -1,5 +1,5 @@
 #!/bin/sh
-#     Shorewall WAN Interface monitor - V4.4
+#     Shorewall WAN Interface monitor - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Macros/IPFS-swarm

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
+#
+# This macro handles IPFS data traffic (the connection to IPFS swarm).
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     4001

Shorewall/Macros/macro.Apcupsd

@@ -1,9 +1,9 @@
 #
-# Shorewall - /usr/share/shorewall/macro.SNMPtrap
+# Shorewall -- /usr/share/shorewall/macro.Apcupsd
 #
-# This macro deprecated by SNMPtrap.
+# This macro handles apcupsd traffic.
 #
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
-SNMPtrap
+PARAM	-	-	tcp	3551

Shorewall/Macros/macro.Bitcoin

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.Bitcoin
+#
+# Macro for handling Bitcoin P2P traffic
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	8333

Shorewall/Macros/macro.BitcoinRPC

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.BitcoinRPC
+#
+# Macro for handling Bitcoin RPC traffic
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	8332

Shorewall/Macros/macro.BitcoinZMQ

@@ -0,0 +1,9 @@
+#
+# Shorewall --/usr/share/shorewall/macro.BitcoinZMQ
+#
+# Macro for handling Bitcoin ZMQ traffic
+# See https://github.com/bitcoin/bitcoin/blob/master/doc/zmq.md
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	28332

Shorewall/Macros/macro.Cockpit

@@ -0,0 +1,12 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Cockpit
+#
+# This macro handles Time protocol (RFC868).
+# Unless you are supporting extremely old hardware or software,
+# you shouldn't be using this.  NTP is a superior alternative.
+#
+#		By Eric Teeter
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	9090

Shorewall/Macros/macro.FreeIPA

@@ -0,0 +1,16 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.FreeIPA
+#
+# This macro handles FreeIPA server traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+DNS
+HTTP
+HTTPS
+Kerberos
+Kpasswd
+LDAP
+LDAPS
+NTP

Shorewall/Macros/macro.IPFS-API

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-API
+#
+# This macro handles IPFS API port (commands for the IPFS daemon).
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     5001

Shorewall/Macros/macro.IPFS-gateway

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-gateway
+#
+# This macro handles the IPFS gateway to HTTP.
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     8080

Shorewall/Macros/macro.IPFS-swarm

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
+#
+# This macro handles IPFS data traffic (the connection to IPFS swarm).
+#
+###############################################################################
+#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
+
+PARAM   -       -       tcp     4001

Shorewall/Macros/macro.IPMI

@@ -11,13 +11,20 @@
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
 PARAM	-	-	tcp	623		# RMCP
+PARAM	-	-	udp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
-PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
+PARAM	-	-	tcp	5120,5122,5123	# CD,FD,HD (Asus, Aten)
 PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
 PARAM	-	-	tcp	7578		# Remote Console (AMI)
-PARAM	-	-	udp	623		# RMCP
+PARAM	-	-	tcp	8889		# WS-MAN
 HTTP
-HTTPS
-SNMP
-SSH						# Serial over Lan
 Telnet
+SNMP
+
+# TLS/secure ports
+PARAM	-	-	tcp	3520		# Remote Console (Redfish)
+PARAM	-	-	tcp	3669		# Virtual Media (Dell)
+PARAM	-	-	tcp	5124,5126,5127	# CD,FD,HD (AMI)
+PARAM	-	-	tcp	7582		# Remote Console (AMI)
+HTTPS
+SSH						# Serial over Lan

Shorewall/Macros/macro.Kpasswd

@@ -0,0 +1,10 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Kpasswd
+#
+# This macro handles Kerberos "passwd" traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	464
+PARAM	-	-	udp	464

Shorewall/Macros/macro.ONCRPC

@@ -0,0 +1,8 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.ONCRPC
+#
+# This macro handles ONC RCP traffic (for rpcbind on Linux, etc).
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp,udp	111

Shorewall/Macros/macro.RDP

@@ -6,4 +6,5 @@
 ###############################################################################
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
+PARAM	-	-	udp	3389
 PARAM	-	-	tcp	3389

Shorewall/Macros/macro.RedisSecure

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.RedisSecure
+#
+# This macro handles Redis Secure (SSL/TLS) traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	6380

Shorewall/Macros/macro.Rwhois

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Rwhois
+#
+# This macro handles Remote Who Is (rwhois) traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	4321

Shorewall/Macros/macro.SSDP

@@ -0,0 +1,9 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.SSDP
+#
+# This macro handles SSDP (used by DLNA/UPnP) client traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	udp	1900

Shorewall/Macros/macro.SSDPserver

@@ -0,0 +1,10 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.SSDPserver
+#
+# This macro handles SSDP (used by DLNA/UPnP) server bidirectional traffic.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	udp	1900
+PARAM	DEST	SOURCE	udp	-	1900

Shorewall/Macros/macro.Tor

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.Tor
+#
+# Macro for handling Tor Onion Network traffic
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	9001	

Shorewall/Macros/macro.TorBrowserBundle

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.TorBrowserBundle
+#
+# Macro for handling Tor Onion Network traffic provided by Tor Browser Bundle
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	9150

Shorewall/Macros/macro.TorControl

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.TorControl
+#
+# Macro for handling Tor Controller Applications traffic
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	9051	

Shorewall/Macros/macro.TorDirectory

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.TorDirectory
+#
+# Macro for handling Tor Directory traffic
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	9030

Shorewall/Macros/macro.TorSocks

@@ -0,0 +1,8 @@
+#
+# Shorewall --/usr/share/shorewall/macro.TorSocks
+#
+# Macro for handling Tor Socks Proxy traffic
+#
+##############################################################################################################################################################
+#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
+PARAM		-		-		tcp	9050	

Shorewall/Macros/macro.WUDO

@@ -0,0 +1,9 @@
+
+# Shorewall -- /usr/share/shorewall/macro.WUDO
+#
+# This macro handles WUDO (Windows Update Delivery Optimization)
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+PARAM	-	-	tcp	7680

Shorewall/Makefile-lite

@@ -1,82 +0,0 @@
-#     Shorewall Packet Filtering Firewall Export Directory Makefile - V4.2
-#
-#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-#     (c) 2006 - Tom Eastep (teastep@shorewall.net)
-#
-#	Shorewall documentation is available at http://www.shorewall.net
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of Version 2 of the GNU General Public License
-#	as published by the Free Software Foundation.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, write to the Free Software
-#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-################################################################################
-# Place this file in each export directory. Modify each copy to set HOST
-# to the name of the remote firewall corresponding to the directory.
-#
-#	To make the 'firewall' script, type "make".
-#
-#	Once the script is compiling correctly, you can install it by
-#	typing "make install".
-#
-################################################################################
-#                             V A R I A B L E S
-#
-# Files in the export directory on which the firewall script does not depend
-#
-IGNOREFILES =  firewall% Makefile% trace% %~
-#
-# Remote Firewall system
-#
-HOST = gateway
-#
-# Save some typing
-#
-LITEDIR = /var/lib/shorewall-lite
-#
-# Set this if the remote system has a non-standard modules directory
-#
-MODULESDIR=
-#
-# Default target is the firewall script
-#
-################################################################################
-#                                T A R G E T S
-#
-all: firewall
-#
-# Only generate the capabilities file if it doesn't already exist
-#
-capabilities:
-	ssh root@$(HOST) "MODULESDIR=$(MODULESDIR) /usr/share/shorewall-lite/shorecap > $(LITEDIR)/capabilities"
-	scp root@$(HOST):$(LITEDIR)/capabilities .
-#
-# Compile the firewall script. Using the 'wildcard' function causes "*" to be expanded so that
-# 'filter-out' will be presented with the list of files in this directory rather than "*"
-#
-firewall: $(filter-out $(IGNOREFILES) capabilities , $(wildcard *) ) capabilities
-	shorewall compile -e . firewall
-#
-# Only reload on demand.
-#
-install: firewall
-	scp firewall firewall.conf root@$(HOST):$(LITEDIR)
-	ssh root@$(HOST) "/sbin/shorewall-lite restart"
-#
-# Save running configuration
-#
-save:
-	ssh root@$(HOST) "/sbin/shorewall-lite save"
-#
-# Remove generated files
-#
-clean:
-	rm -f capabilities firewall firewall.conf reload

Shorewall/Perl/Shorewall/ARP.pm

@@ -1,5 +1,5 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/ARP.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/ARP.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #

Shorewall/Perl/Shorewall/Accounting.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/Accounting.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/Accounting.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2019 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -195,12 +195,19 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     $ports  = ''    if $ports  eq 'any' || $ports  eq 'all';
     $sports = ''    if $sports eq 'any' || $sports eq 'all';
 
-    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT;
+    fatal_error "USER/GROUP may only be specified in the OUTPUT section" unless $user eq '-' || $asection == OUTPUT_SECTION;
 
     my $rule = do_proto( $proto, $ports, $sports ) . do_user ( $user ) . do_test ( $mark, $globals{TC_MASK} ) . do_headers( $headers );
     my $prerule = '';
     my $rule2 = 0;
     my $jump  = 0;
+    my $raw_matches = get_inline_matches(1);
+
+    if ( $raw_matches =~ s/^\s*+// ) {
+	$prerule = $raw_matches;
+    } else {
+	$rule .= $raw_matches;
+    }
 
     unless ( $action eq 'COUNT' ) {
 	if ( $action eq 'DONE' ) {
@@ -242,9 +249,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 		    $rule .= do_nfacct( $_ );
 		}
 	    }
-	} elsif ( $action eq 'INLINE' ) {
+	} elsif ( $action ne 'INLINE' ) {
-	    $rule .= get_inline_matches(1);
-	} else {
 	    ( $action, my $cmd ) = split /:/, $action;
 
 	    if ( $cmd ) {
@@ -266,7 +271,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
     if ( $source eq 'any' || $source eq 'all' ) {
         $source = ALLIP;
     } else {
-	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT || ! $asection );
+	fatal_error "MAC addresses only allowed in the INPUT and FORWARD sections" if $source =~ /~/ && ( $asection == OUTPUT_SECTION || ! $asection );
     }
 
     if ( have_bridges && ! $asection ) {
@@ -282,7 +287,7 @@ sub process_accounting_rule1( $$$$$$$$$$$ ) {
 
 	    if ( $dest eq 'any' || $dest eq 'all' || $dest eq ALLIP ) {
 		expand_rule(
-			    ensure_rules_chain ( 'accountout' ) ,
+			    ensure_chain ( $config{ACCOUNTING_TABLE}, 'accountout' ) ,
 			    OUTPUT_RESTRICT ,
 			    $prerule ,
 			    $rule ,

Shorewall/Perl/Shorewall/Compiler.pm

@@ -1,10 +1,10 @@
 #! /usr/bin/perl -w
 #
-#     The Shoreline Firewall Packet Filtering Firewall Compiler - V5.0
+#     The Shoreline Firewall Packet Filtering Firewall Compiler - V5.2
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2016 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2019 - Tom Eastep (teastep@shorewall.net)
 #
 #	Complete documentation is available at http://shorewall.net
 #
@@ -47,19 +47,19 @@ our @EXPORT = qw( compiler );
 our @EXPORT_OK = qw( $export );
 our $VERSION = 'MODULEVERSION';
 
-our $export;
+our $export;          # True when compiling for export
 
-our $test;
+our $test;            # True when running regression tests
 
-our $family;
+our $family;          # IP address family (4 or 6)
 
-our $have_arptables;
+our $have_arptables;  # True if we have arptables rules
 
 #
 # Initilize the package-globals in the other modules
 #
 sub initialize_package_globals( $$$ ) {
-    Shorewall::Config::initialize($family, $_[1], $_[2]);
+    Shorewall::Config::initialize($family, $export, $_[1], $_[2]);
     Shorewall::Chains::initialize ($family, 1, $export );
     Shorewall::Zones::initialize ($family, $_[0]);
     Shorewall::Nat::initialize($family);
@@ -103,13 +103,13 @@ sub generate_script_1( $ ) {
 
     copy2( $lib, $debug ) if -f $lib;
 
-    emit <<'EOF';
+    emithd<<'EOF';
 ################################################################################
 # Functions to execute the various user exits (extension scripts)
 ################################################################################
 EOF
 
-    for my $exit ( qw/init start tcclear started stop stopped clear refresh refreshed restored/ ) {
+    for my $exit ( qw/init start tcclear started stop stopped clear restored enabled disabled/ ) {
 	emit "\nrun_${exit}_exit() {";
 	push_indent;
 	append_file $exit or emit 'true';
@@ -125,7 +125,7 @@ EOF
 	emit '}';
     }
 
-    emit <<'EOF';
+    emithd <<'EOF';
 ################################################################################
 # End user exit functions
 ################################################################################
@@ -209,6 +209,8 @@ sub generate_script_2() {
     emit (   '[ -f ${g_confdir}/vardir ] && . ${g_confdir}/vardir' );
     emit ( qq([ -n "\${VARDIR:=$shorewallrc1{VARDIR}}" ]) );
     emit ( qq([ -n "\${VARLIB:=$shorewallrc1{VARLIB}}" ]) );
+    emit ( qq([ -n "\${CONFDIR:=$shorewallrc1{CONFDIR}}" ]) );
+    emit ( qq([ -n "\${SHAREDIR:=$shorewallrc1{SHAREDIR}}" ]) );
 
     emit 'TEMPFILE=';
 
@@ -266,13 +268,18 @@ sub generate_script_2() {
 	emit( '',
 	      'chain_exists DOCKER nat && chain_exists DOCKER && g_docker=Yes',
 	    );
-	emit( 'chain_exists DOCKER-ISOLATION && g_dockernetwork=Yes]' );
+	emit( 'chain_exists DOCKER-INGRESS   && g_dockeringress=Yes' );
-	emit( '' );
+	emit( 'chain_exists DOCKER-USER      && g_dockeruser=Yes' );
+	emit( 'if chain_exists DOCKER-ISOLATION; then',
+	      '    g_dockernetwork=One',
+	      'elif chain_exists DOCKER-ISOLATION-STAGE-1; then',
+	      '    g_dockernetwork=Two',
+	      'fi' );
     }
 
     pop_indent;
 
-    emit "\n}\n"; # End of initialize()
+    emit "}\n"; # End of initialize()
 
     emit( '' ,
 	  '#' ,
@@ -309,10 +316,9 @@ sub generate_script_2() {
 	    push_indent;
 
 	    if ( $global_variables == ( ALL_COMMANDS | NOT_RESTORE ) ) {
-
+		verify_required_interfaces(0);
 		set_global_variables(0, 0);
-
+		handle_optional_interfaces;
-		handle_optional_interfaces(0);
 	    }
 
 	    emit ';;';
@@ -324,19 +330,19 @@ sub generate_script_2() {
 	    push_indent;
 	}
 
+	verify_required_interfaces(1);
 	set_global_variables(1,1);
+	handle_optional_interfaces;
 
 	if ( $global_variables & NOT_RESTORE ) {
-	    handle_optional_interfaces(1);
 	    emit ';;';
 	    pop_indent;
 	    pop_indent;
 	    emit ( 'esac' );
-	} else {
-	    handle_optional_interfaces(1);
 	}
     } else {
-	emit( 'true' ) unless handle_optional_interfaces(1);
+	verify_required_interfaces(1);
+	emit( 'true' ) unless handle_optional_interfaces;
     }
 
     pop_indent;
@@ -355,7 +361,7 @@ sub generate_script_2() {
 #    Note: This function is not called when $command eq 'check'. So it must have no side effects other
 #          than those related to writing to the output script file.
 #
-sub generate_script_3($) {
+sub generate_script_3() {
 
     if ( $family == F_IPV4 ) {
 	progress_message2 "Creating iptables-restore input...";
@@ -365,7 +371,6 @@ sub generate_script_3($) {
 
     create_netfilter_load( $test );
     create_arptables_load( $test ) if $have_arptables;
-    create_chainlist_reload( $_[0] );
     create_save_ipsets;
     create_load_ipsets;
 
@@ -379,10 +384,10 @@ sub generate_script_3($) {
     save_progress_message 'Initializing...';
 
     if ( $export || $config{EXPORTMODULES} ) {
-	my $fn = find_file( $config{LOAD_HELPERS_ONLY} ? 'helpers' : 'modules' );
+	my $fn = find_file( 'helpers' );
 
 	if ( -f $fn && ( $config{EXPORTMODULES} || ( $export && ! $fn =~ "^$globals{SHAREDIR}/" ) ) ) {
-	    emit 'echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir';
+	    emit 'echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir';
 	    emit 'cat > ${VARDIR}/.modules << EOF';
 	    open_file $fn;
 
@@ -397,16 +402,10 @@ sub generate_script_3($) {
 	emit 'load_kernel_modules Yes';
     }
 
-    emit '';
+    emit( '' ,
-
+	  'run_init_exit',
-    emit ( 'if [ "$COMMAND" = refresh ]; then' ,
+	  '' ,
-	   '   run_refresh_exit' ,
+	  'load_ipsets' ,
-	   'else' ,
-	   '    run_init_exit',
-	   'fi',
-	   '' );
-
-    emit( 'load_ipsets' ,
 	  '' );
 
     create_nfobjects;
@@ -464,11 +463,6 @@ sub generate_script_3($) {
     dump_proxy_arp;
     emit_unindented '__EOF__';
 
-    emit( '',
-	  'if [ "$COMMAND" != refresh ]; then' );
-
-    push_indent;
-
     emit 'cat > ${VARDIR}/zones << __EOF__';
     dump_zone_contents;
     emit_unindented '__EOF__';
@@ -481,10 +475,6 @@ sub generate_script_3($) {
     dump_mark_layout;
     emit_unindented '__EOF__';
 
-    pop_indent;
-
-    emit "fi\n";
-
     emit '> ${VARDIR}/nat';
 
     add_addresses;
@@ -523,29 +513,12 @@ sub generate_script_3($) {
 
     my $config_dir = $globals{CONFIGDIR};
 
-    emit<<"EOF";
+    emithd <<"EOF";
     set_state Started $config_dir
     run_restored_exit
-elif [ \$COMMAND = refresh ]; then
+else
-    chainlist_reload
+    setup_netfilter
 EOF
-    push_indent;
-    setup_load_distribution;
-    setup_forwarding( $family , 0 );
-    pop_indent;
-    #
-    # Use a parameter list rather than 'here documents' to avoid an extra blank line
-    #
-    emit( '    run_refreshed_exit',
-	  '    do_iptables -N shorewall' );
-
-    emit( '    do_iptables -A shorewall -m recent --set --name %CURRENTTIME' ) if have_capability 'RECENT_MATCH';
-
-    emit( "    set_state Started $config_dir",
-	  '    [ $0 = ${VARDIR}/firewall ] || cp -f $(my_pathname) ${VARDIR}/firewall',
-	  'else',
-	  '    setup_netfilter'	);
-
     push_indent;
     emit 'setup_arptables' if $have_arptables;
     setup_load_distribution;
@@ -570,7 +543,7 @@ EOF
 	  '    run_started_exit',
 	  "fi\n" );
 
-    emit<<'EOF';
+    emithd<<'EOF';
 date > ${VARDIR}/restarted
 
 case $COMMAND in
@@ -580,9 +553,6 @@ case $COMMAND in
     reload)
         mylogger kern.info "$g_product reloaded"
         ;;
-    refresh)
-        mylogger kern.info "$g_product refreshed"
-        ;;
     restore)
         mylogger kern.info "$g_product restored"
         ;;
@@ -617,8 +587,8 @@ sub compile_info_command() {
 #
 sub compiler {
 
-    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $chains , $log , $log_verbosity, $preview, $confess , $update , $annotate , $config_path, $shorewallrc                      , $shorewallrc1 , $inline ) =
+    my ( $scriptfilename, $directory, $verbosity, $timestamp , $debug, $log , $log_verbosity, $preview, $confess , $update , $annotate , $config_path, $shorewallrc                      , $shorewallrc1 ) =
-       ( '',              '',         -1,          '',          0,      '',       '',   -1,             0,        0,         0,        0,        , ''          , '/usr/share/shorewall/shorewallrc', ''            , 0 );
+       ( '',              '',         -1,         '',          0,      '',    -1,             0,        0,         0,        0,        , ''          , '/usr/share/shorewall/shorewallrc', ''            );
 
     $export         = 0;
     $test           = 0;
@@ -647,7 +617,6 @@ sub compiler {
 		  timestamp     => { store => \$timestamp,     validate => \&validate_boolean   } ,
 		  debug         => { store => \$debug,         validate => \&validate_boolean   } ,
 		  export        => { store => \$export ,       validate => \&validate_boolean   } ,
-		  chains        => { store => \$chains },
 		  log           => { store => \$log },
 		  log_verbosity => { store => \$log_verbosity, validate => \&validate_verbosity } ,
 		  test          => { store => \$test },
@@ -655,7 +624,6 @@ sub compiler {
 		  confess       => { store => \$confess,       validate=> \&validate_boolean    } ,
 		  update        => { store => \$update,        validate=> \&validate_boolean    } ,
 		  annotate      => { store => \$annotate,      validate=> \&validate_boolean    } ,
-		  inline        => { store => \$inline,        validate=> \&validate_boolean    } ,
 		  config_path   => { store => \$config_path } ,
 		  shorewallrc   => { store => \$shorewallrc } ,
 		  shorewallrc1  => { store => \$shorewallrc1 } ,
@@ -689,9 +657,10 @@ sub compiler {
     set_timestamp( $timestamp );
     set_debug( $debug , $confess );
     #
+    #                                      S H O R E W A L L R C ,
     #                      S H O R E W A L L . C O N F  A N D  C A P A B I L I T I E S
     #
-    get_configuration( $export , $update , $annotate , $inline );
+    get_configuration( $export , $update , $annotate );
     #
     # Chain table initialization depends on shorewall.conf and capabilities. So it must be deferred until
     # now when shorewall.conf has been processed and the capabilities have been determined.
@@ -793,13 +762,10 @@ sub compiler {
 	emit '}'; # End of setup_common_rules()
     }
 
-    disable_script;
     #
     #                      R O U T I N G _ A N D _ T R A F F I C _ S H A P I N G
     #         (Writes the setup_routing_and_traffic_shaping() function to the compiled script)
     #
-    enable_script;
-    #
     # Validate the TC files so that the providers will know what interfaces have TC
     #
     my $tcinterfaces = process_tc;
@@ -817,7 +783,7 @@ sub compiler {
     #
     # Setup Masquerade/SNAT
     #
-    setup_snat( $update );
+    setup_snat;
     #
     # Setup Nat
     #
@@ -898,7 +864,7 @@ sub compiler {
 
 	optimize_level0;
 
-	if ( ( my $optimize = $config{OPTIMIZE} ) & 0x1E ) {
+	if ( ( my $optimize = $config{OPTIMIZE} ) & OPTIMIZE_MASK ) {
 	    progress_message2 'Optimizing Ruleset...';
 	    #
 	    # Optimize Policy Chains
@@ -920,7 +886,7 @@ sub compiler {
 	#                          N E T F I L T E R   L O A D
 	#    (Produces setup_netfilter(), setup_arptables(), chainlist_reload() and define_firewall() )
 	#
-	generate_script_3( $chains );
+	generate_script_3();
 	#
 	# We must reinitialize Shorewall::Chains before generating the iptables-restore input
 	# for stopping the firewall

Shorewall/Perl/Shorewall/IPAddrs.pm

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.0 -- /usr/share/shorewall/Shorewall/IPAddrs.pm
+# Shorewall 5.2 -- /usr/share/shorewall/Shorewall/IPAddrs.pm
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
-#     (c) 2007-2015 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2007-2017 - Tom Eastep (teastep@shorewall.net)
 #
 #       Complete documentation is available at http://shorewall.net
 #
@@ -60,10 +60,10 @@ our @EXPORT = ( qw( ALLIPv4
 		  decompose_net
 		  decompose_net_u32
 		  compare_nets
+		  loopback_address
 		  validate_host
 		  validate_range
 		  ip_range_explicit
-		  expand_port_range
 		  allipv4
 		  allipv6
 		  allip
@@ -74,10 +74,6 @@ our @EXPORT = ( qw( ALLIPv4
 		  resolve_proto
 		  resolve_dnsname
 		  proto_name
-		  validate_port
-		  validate_portpair
-		  validate_portpair1
-		  validate_port_list
 		  validate_icmp
 		  validate_icmp6
 		 ) );
@@ -103,12 +99,14 @@ our $resolve_dnsname;
 our $validate_range;
 our $validate_host;
 our $family;
+our $loopback_address;
 
 use constant { ALLIPv4             => '0.0.0.0/0' ,
 	       ALLIPv6             => '::/0' ,
 	       NILIPv4             => '0.0.0.0' ,
 	       NILIPv6             => '::' ,
 	       IPv4_MULTICAST      => '224.0.0.0/4' ,
+	       IPv4_LOOPBACK       => '127.0.0.1' ,
 	       IPv6_MULTICAST      => 'ff00::/8' ,
 	       IPv6_LINKLOCAL      => 'fe80::/10' ,
 	       IPv6_SITELOCAL      => 'feC0::/10' ,
@@ -375,6 +373,10 @@ sub rfc1918_networks() {
     @rfc1918_networks
 }
 
+sub loopback_address() {
+    $loopback_address;
+}
+
 #
 # Protocol/port validation
 #
@@ -411,114 +413,6 @@ sub proto_name( $ ) {
     $proto =~ /^(\d+)$/ ? $prototoname[ $proto ] || scalar getprotobynumber $proto : $proto
 }
 
-sub validate_port( $$ ) {
-    my ($proto, $port) = @_;
-
-    my $value;
-
-    if ( $port =~ /^(\d+)$/ || $port =~ /^0x/ ) {
-	$port = numeric_value $port;
-	return $port if defined $port && $port && $port <= 65535;
-    } else {
-	$proto = proto_name $proto if $proto =~ /^(\d+)$/;
-	$value = getservbyname( $port, $proto );
-    }
-
-    return $value if defined $value;
-
-    fatal_error "The separator for a port range is ':', not '-' ($port)" if $port =~ /^\d+-\d+$/;
-
-    fatal_error "Invalid/Unknown $proto port/service ($_[1])" unless defined $value;
-}
-
-sub validate_portpair( $$ ) {
-    my ($proto, $portpair) = @_;
-    my $what;
-    my $pair = $portpair;
-    #
-    # Accept '-' as a port-range separator
-    #
-    $pair =~ tr/-/:/ if $pair =~ /^[-0-9]+$/;
-
-    fatal_error "Invalid port range ($portpair)" if $pair =~ tr/:/:/ > 1;
-
-    $pair = "0$pair"       if substr( $pair,  0, 1 ) eq ':';
-    $pair = "${pair}65535" if substr( $pair, -1, 1 ) eq ':';
-
-    my @ports = split /:/, $pair, 2;
-
-    my $protonum = resolve_proto( $proto ) || 0;
-
-    $_ = validate_port( $protonum, $_) for grep $_, @ports;
-
-    if ( @ports == 2 ) {
-	$what = 'port range';
-	fatal_error "Invalid port range ($portpair)" unless $ports[0] < $ports[1];
-    } else {
-	$what = 'port';
-    }
-
-    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, UDPLITE, SCTP or DCCP" unless
-	defined $protonum && ( $protonum == TCP     ||
-			       $protonum == UDP     ||
-			       $protonum == UDPLITE ||
-			       $protonum == SCTP    ||
-			       $protonum == DCCP );
-    join ':', @ports;
-
-}
-
-sub validate_portpair1( $$ ) {
-    my ($proto, $portpair) = @_;
-    my $what;
-
-    fatal_error "Invalid port range ($portpair)" if $portpair =~ tr/-/-/ > 1;
-
-    $portpair = "1$portpair"       if substr( $portpair,  0, 1 ) eq ':';
-    $portpair = "${portpair}65535" if substr( $portpair, -1, 1 ) eq ':';
-
-    my @ports = split /-/, $portpair, 2;
-
-    my $protonum = resolve_proto( $proto ) || 0;
-
-    $_ = validate_port( $protonum, $_) for grep $_, @ports;
-
-    if ( @ports == 2 ) {
-	$what = 'port range';
-	fatal_error "Invalid port range ($portpair)" unless $ports[0] && $ports[0] < $ports[1];
-    } else {
-	$what = 'port';
-	fatal_error 'Invalid port number (0)' unless $portpair;
-    }
-
-    fatal_error "Using a $what ( $portpair ) requires PROTO TCP, UDP, SCTP or DCCP" unless
-	defined $protonum && ( $protonum == TCP  ||
-			       $protonum == UDP  ||
-			       $protonum == SCTP ||
-			       $protonum == DCCP );
-    join '-', @ports;
-
-}
-
-sub validate_port_list( $$ ) {
-    my $result = '';
-    my ( $proto, $list ) = @_;
-    my @list   = split_list( $list, 'port' );
-
-    if ( @list > 1 && $list =~ /[:-]/ ) {
-	require_capability( 'XMULTIPORT' , 'Port ranges in a port list', '' );
-    }
-
-    $proto = proto_name $proto;
-
-    for ( @list ) {
-	my $value = validate_portpair( $proto , $_ );
-	$result = $result ? join ',', $result, $value : $value;
-    }
-
-    $result;
-}
-
 my %icmp_types = ( any                          => 'any',
 		   'echo-reply'                 => 0,
 		   'destination-unreachable'    => 3,
@@ -572,67 +466,6 @@ sub validate_icmp( $ ) {
     fatal_error "Invalid ICMP Type ($type)"
 }
 
-#
-# Expands a port range into a minimal list of ( port, mask ) pairs.
-# Each port and mask are expressed as 4 hex nibbles without a leading '0x'.
-#
-# Example:
-#
-#       DB<3> @foo = Shorewall::IPAddrs::expand_port_range( 6, '110:' ); print "@foo\n"
-#       006e fffe 0070 fff0 0080 ff80 0100 ff00 0200 fe00 0400 fc00 0800 f800 1000 f000 2000 e000 4000 c000 8000 8000
-#
-sub expand_port_range( $$ ) {
-    my ( $proto, $range ) = @_;
-
-    if ( $range =~ /^(.*):(.*)$/ ) {
-	my ( $first, $last ) = ( $1, $2);
-	my @result;
-
-	fatal_error "Invalid port range ($range)" unless $first ne '' or $last ne '';
-	#
-	# Supply missing first/last port number
-	#
-	$first = 0     if $first eq '';
-	$last  = 65535 if $last eq '';
-	#
-	# Validate the ports
-	#
-	( $first , $last ) = ( validate_port( $proto, $first || 1 ) , validate_port( $proto, $last ) );
-
-	$last++; #Increment last address for limit testing.
-	#
-	# Break the range into groups:
-	#
-	#      - If the first port in the remaining range is odd, then the next group is ( <first>, ffff ).
-	#      - Otherwise, find the largest power of two P that divides the first address such that
-	#        the remaining range has less than or equal to P ports. The next group is
-	#        ( <first> , ~( P-1 ) ).
-	#
-	while ( ( my $ports = ( $last - $first ) ) > 0 ) {
-	    my $mask = 0xffff;         #Mask for current ports in group.
-	    my $y    = 2;              #Next power of two to test
-	    my $z    = 1;              #Number of ports in current group (Previous value of $y).
-
-	    while ( ( ! ( $first % $y ) ) && ( $y <= $ports ) ) {
-		$mask <<= 1;
-		$z  = $y;
-		$y <<= 1;
-	    }
-	    #
-	    #
-	    push @result, sprintf( '%04x', $first ) , sprintf( '%04x' , $mask & 0xffff );
-	    $first += $z;
-	}
-
-	fatal_error "Invalid port range ($range)" unless @result; # first port > last port
-
-	@result;
-
-    } else {
-	( sprintf( '%04x' , validate_port( $proto, $range ) ) , 'ffff' );
-    }
-}
-
 sub valid_6address( $ ) {
     my $address = $_[0];
 
@@ -929,6 +762,7 @@ sub initialize( $ ) {
 	$nilip            = NILIPv4;
 	@nilip            = @nilipv4;
 	$vlsm_width       = VLSMv4;
+	$loopback_address = IPv4_LOOPBACK;
 	$valid_address    = \&valid_4address;
 	$validate_address = \&validate_4address;
 	$validate_net     = \&validate_4net;
@@ -941,6 +775,7 @@ sub initialize( $ ) {
 	$nilip            = NILIPv6;
 	@nilip            = @nilipv6;
 	$vlsm_width       = VLSMv6;
+	$loopback_address = IPv6_LOOPBACK;
 	$valid_address    = \&valid_6address;
 	$validate_address = \&validate_6address;
 	$validate_net     = \&validate_6net;