Correct two-interface sample snat file

- s/92/192/

Signed-off-by: Tom Eastep <teastep@shorewall.net>

.gitattributes

@@ -1 +0,0 @@
-*targetname export-ignore

Shorewall-core/INSTALL

@@ -18,7 +18,7 @@ Shoreline Firewall (Shorewall) Version 5
 
 ---------------------------------------------------------------------------
 
-Please see https://shorewall.org/Install.htm for installation
+Please see http://www.shorewall.net/Install.htm for installation
 instructions.
 
 

Shorewall-core/Shorewall-core-targetname

@@ -1 +0,0 @@
-5.2.8-RC1

Shorewall-core/configure

@@ -1,10 +1,10 @@
 #!/bin/bash
 #
-#     Shorewall Packet Filtering Firewall configuration program - V5.2
+#     Shorewall Packet Filtering Firewall RPM configuration program - V4.6
 #
-#     (c) 2012,2014,2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2012,2014 - Tom Eastep (teastep@shorewall.net)
 #
-#	Shorewall documentation is available at https://shorewall.org
+#	Shorewall documentation is available at http://www.shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -109,9 +109,6 @@ if [ -z "$vendor" ]; then
 	    opensuse)
 		vendor=suse
 		;;
-	    alt|basealt|altlinux)
-		vendor=alt
-		;;
 	    *)
 		vendor="$ID"
 		;;
@@ -135,8 +132,6 @@ if [ -z "$vendor" ]; then
 	    if [ -f /etc/debian_version ]; then
 		params[HOST]=debian
 		ls -l /sbin/init | fgrep -q systemd &&  rcfile=shorewallrc.debian.systemd || rcfile=shorewallrc.debian.sysvinit
-	    elif [ -f /etc/altlinux-release ] ; then
-		params[HOST]=alt
 	    elif [ -f /etc/redhat-release ]; then
 		params[HOST]=redhat
 		rcfile=shorewallrc.redhat
@@ -195,7 +190,7 @@ for p in ${!params[@]}; do
 done
 
 echo '#'                                                                 > shorewallrc
-echo "# Created by Shorewall Core version $VERSION configure - " `date --utc --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}"` >> shorewallrc
+echo "# Created by Shorewall Core version $VERSION configure - " `date` >> shorewallrc
 echo "# rc file: $rcfile"                                               >> shorewallrc
 echo '#'                                                                >> shorewallrc
 

Shorewall-core/configure.pl

@@ -1,10 +1,10 @@
 #! /usr/bin/perl -w
 #
-#     Shorewall Packet Filtering Firewall configuration program - V5.2
+#     Shorewall Packet Filtering Firewall RPM configuration program - V4.5
 #
 #     (c) 2012, 2014 - Tom Eastep (teastep@shorewall.net)
 #
-#	Shorewall documentation is available at https://shorewall.org
+#	Shorewall documentation is available at http://www.shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -74,8 +74,6 @@ unless ( defined $vendor ) {
 	} elsif ( $id eq 'ubuntu' || $id eq 'debian' ) {
 	    my $init = `ls -l /sbin/init`;
 	    $vendor = $init =~ /systemd/ ? 'debian.systemd' : 'debian.sysvinit';
-	} elsif ( $id eq 'alt' || $id eq 'basealt' || $id eq 'altlinux' ) {
-	    $vendor = 'alt';
 	} else {
 	    $vendor = $id;
 	}
@@ -119,9 +117,6 @@ if ( defined $vendor ) {
 	} else {
 	    $rcfilename = 'shorewallrc.debian.sysvinit';
 	}
-    } elsif ( -f '/etc/altlinux-release' ){
-	$vendor = 'alt';
-	$rcfilename = 'shorewallrc.alt';
     } elsif ( -f '/etc/redhat-release' ){
 	$vendor = 'redhat';
 	$rcfilename = 'shorewallrc.redhat';
@@ -178,12 +173,7 @@ my $outfile;
 
 open $outfile, '>', 'shorewallrc' or die "Can't open 'shorewallrc' for output: $!";
 
-if ( $ENV{SOURCE_DATE_EPOCH} ) {
-    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s\n", VERSION, `date  --utc --date=\"\@$ENV{SOURCE_DATE_EPOCH}\"`;
-} else {
-    printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
-}
-
+printf $outfile "#\n# Created by Shorewall Core version %s configure.pl - %s %2d %04d %02d:%02d:%02d\n", VERSION, $abbr[$localtime[4]], $localtime[3], 1900 + $localtime[5] , @localtime[2,1,0];
 print $outfile "# rc file: $rcfilename\n#\n";
 
 print  $outfile "# Input: @ARGV\n#\n" if @ARGV;

Shorewall-core/install.sh

@@ -2,9 +2,9 @@
 #
 # Script to install Shoreline Firewall Core Modules
 #
-#     (c) 2000-2018 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -22,20 +22,64 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version
+
 PRODUCT=shorewall-core
 Product="Shorewall Core"
-
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
+    echo "usage: $ME [ <configuration-file> ] "
+    echo "       $ME -v"
+    echo "       $ME -h"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    echo $dir/$1
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure shorewall to start automatically at boot" >&2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -54,16 +98,16 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -82,7 +126,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Installer Version $VERSION"
+			echo "Shorewall Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    *)
@@ -104,14 +148,14 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
+	. ./shorewallrc
 	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
+	. ~/.shorewallrc || exit 1
 	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
+	. /usr/share/shorewall/shorewallrc
 	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -125,7 +169,7 @@ elif [ $# -eq 1 ]; then
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -172,9 +216,6 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
-		    alt|basealt|altlinux)
-			BUILD=alt
-			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -183,8 +224,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
-	    elif [ -f /etc/altlinux-release ]; then
-		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/slackware-version ] ; then
@@ -243,15 +282,16 @@ case "$HOST" in
     apple)
 	echo "Installing Mac-specific configuration...";
 	;;
-    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt|alt)
+    debian|gentoo|redhat|slackware|archlinux|linux|suse|openwrt)
 	;;
     *)
-	fatal_error "Unknown HOST \"$HOST\""
+	echo "ERROR: Unknown HOST \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
 if [ -z "$file" ]; then
-    if [ $HOST = linux ]; then
+    if $HOST = linux; then
 	file=shorewallrc.default
     else
 	file=shorewallrc.${HOST}
@@ -264,8 +304,7 @@ if [ -z "$file" ]; then
     echo "" >&2
     echo "Example:" >&2
     echo "" >&2
-    echo "   ./install.sh $file" >&2
-    exit 1
+    echo "   ./install.sh $file" &>2
 fi
 
 if [ -n "$DESTDIR" ]; then
@@ -276,31 +315,45 @@ if [ -n "$DESTDIR" ]; then
     fi
 fi
 
-echo "Installing $Product Version $VERSION"
+echo "Installing Shorewall Core Version $VERSION"
 
 #
 # Create directories
 #
-make_parent_directory ${DESTDIR}${LIBEXECDIR}/shorewall 0755
+mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall
+chmod 755 ${DESTDIR}${LIBEXECDIR}/shorewall
 
-make_parent_directory ${DESTDIR}${SHAREDIR}/shorewall 0755
+mkdir -p ${DESTDIR}${SHAREDIR}/shorewall
+chmod 755 ${DESTDIR}${SHAREDIR}/shorewall
 
-make_parent_directory ${DESTDIR}${CONFDIR} 0755
+mkdir -p ${DESTDIR}${CONFDIR}
+chmod 755 ${DESTDIR}${CONFDIR}
 
-[ -n "${SYSCONFDIR}" ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+if [ -n "${SYSCONFDIR}" ]; then
+    mkdir -p ${DESTDIR}${SYSCONFDIR}
+    chmod 755 ${DESTDIR}${SYSCONFDIR}
+fi
 
 if [ -z "${SERVICEDIR}" ]; then
     SERVICEDIR="$SYSTEMD"
 fi
 
-[ -n "${SERVICEDIR}" ] && make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+if [ -n "${SERVICEDIR}" ]; then
+    mkdir -p ${DESTDIR}${SERVICEDIR}
+    chmod 755 ${DESTDIR}${SERVICEDIR}
+fi
 
-make_parent_directory ${DESTDIR}${SBINDIR} 0755
+mkdir -p ${DESTDIR}${SBINDIR}
+chmod 755 ${DESTDIR}${SBINDIR}
 
-[ -n "${MANDIR}" ] && make_parent_directory ${DESTDIR}${MANDIR} 0755
+if [ -n "${MANDIR}" ]; then
+    mkdir -p ${DESTDIR}${MANDIR}
+    chmod 755 ${DESTDIR}${MANDIR}
+fi
 
 if [ -n "${INITFILE}" ]; then
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    mkdir -p ${DESTDIR}${INITDIR}
+    chmod 755 ${DESTDIR}${INITDIR}
 
     if [ -n "$AUXINITSOURCE" -a -f "$AUXINITSOURCE" ]; then
 	install_file $AUXINITSOURCE ${DESTDIR}${INITDIR}/$AUXINITFILE 0544
@@ -312,66 +365,21 @@ fi
 # Note: ${VARDIR} is created at run-time since it has always been
 #       a relocatable directory on a per-product basis
 #
-# Install the CLI
-#
-install_file shorewall ${DESTDIR}${SBINDIR}/shorewall 0755
-[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall
-echo "Shorewall CLI program installed in ${DESTDIR}${SBINDIR}/shorewall"
-#
 # Install wait4ifup
 #
 install_file wait4ifup ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup 0755
 
 echo
 echo "wait4ifup installed in ${DESTDIR}${LIBEXECDIR}/shorewall/wait4ifup"
-#
-# Install stop_service
-#
-if [ -n "${STOPSERVICEFILE}" ]; then
-    install_file ${STOPSERVICEFILE} ${DESTDIR}${LIBEXECDIR}/shorewall/stop_service 0755
-
-    echo
-    echo "${STOPSERVICEFILE} installed in ${DESTDIR}${LIBEXECDIR}/shorewall/stop_service"
-fi
 
 #
 # Install the libraries
 #
 for f in lib.* ; do
-    case $f in
-        *installer)
-            ;;
-        *)
-            install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
-            echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
-            ;;
-    esac
+    install_file $f ${DESTDIR}${SHAREDIR}/shorewall/$f 0644
+    echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/shorewall/$f"
 done
 
-if [ $SHAREDIR != /usr/share ]; then
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/lib.base
-    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/lib.cli
-fi
-
-#
-# Install the Man Pages
-#
-if [ -n "$MANDIR" ]; then
-    cd manpages
-
-    [ -n "$INSTALLD" ] || make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
-
-    for f in *.8; do
-	gzip -9c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
-	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
-    done
-
-    cd ..
-
-    echo "Man Pages Installed"
-fi
-
 #
 # Symbolically link 'functions' to lib.base
 #
@@ -380,7 +388,7 @@ ln -sf lib.base ${DESTDIR}${SHAREDIR}/shorewall/functions
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/shorewall/coreversion
-chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
+chmod 644 ${DESTDIR}${SHAREDIR}/shorewall/coreversion
 
 if [ -z "${DESTDIR}" ]; then
     if [ $update -ne 0 ]; then
@@ -405,20 +413,14 @@ fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
     for f in lib.*; do
-        case $f in
-            *installer)
-                ;;
-            *)
-                if [ $BUILD != apple ]; then
-                    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
-                else
-                    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
-                fi
-                ;;
-        esac
+	if [ $BUILD != apple ]; then
+	    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+	else
+	    eval sed -i \'\' -e \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/shorewall/$f
+	fi
     done
 fi
 #
-# Report Success
+#  Report Success
 #
-echo "$Product Version $VERSION Installed"
+echo "Shorewall Core Version $VERSION Installed"

Shorewall-core/lib.base

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.base
+# Shorewall 5.0 -- /usr/share/shorewall/lib.base
 #
-#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
+#     (c) 1999-2015 - Tom Eastep (teastep@shorewall.net)
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -20,22 +20,412 @@
 #	You should have received a copy of the GNU General Public License
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
-# This library is a compatibility wrapper around lib.core.
+# This library contains the code common to all Shorewall components except the
+# generated scripts.
 #
 
-if [ -z "$PRODUCT" ]; then
+SHOREWALL_LIBVERSION=40509
+
+[ -n "${g_program:=shorewall}" ]
+
+if [ -z "$g_readrc" ]; then
     #
     # This is modified by the installer when ${SHAREDIR} != /usr/share
     #
     . /usr/share/shorewall/shorewallrc
 
-    g_basedir=${SHAREDIR}/shorewall
+    g_sharedir="$SHAREDIR"/$g_program
+    g_confdir="$CONFDIR"/$g_program
+    g_readrc=1
+fi
 
-    if [ -z "$SHOREWALL_LIBVERSION" ]; then
-	. ${g_basedir}/lib.core
+g_basedir=${SHAREDIR}/shorewall
+
+case $g_program in
+    shorewall)
+	g_product="Shorewall"
+	g_family=4
+	g_tool=iptables
+	g_lite=
+	;;
+    shorewall6)
+	g_product="Shorewall6"
+	g_family=6
+	g_tool=ip6tables
+	g_lite=
+	;;
+    shorewall-lite)
+	g_product="Shorewall Lite"
+	g_family=4
+	g_tool=iptables
+	g_lite=Yes
+	;;
+    shorewall6-lite)
+	g_product="Shorewall6 Lite"
+	g_family=6
+	g_tool=ip6tables
+	g_lite=Yes
+	;;
+esac
+
+if [ -z "${VARLIB}" ]; then
+    VARLIB=${VARDIR}
+    VARDIR=${VARLIB}/$g_program
+elif [ -z "${VARDIR}" ]; then
+    VARDIR="${VARLIB}/${PRODUCT}"
+fi
+
+#
+# Fatal Error
+#
+fatal_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 2
+}
+
+#
+# Not configured Error
+#
+not_configured_error() # $@ = Message
+{
+    echo "   ERROR: $@" >&2
+    exit 6
+}
+
+#
+# Conditionally produce message
+#
+progress_message() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 1 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message2() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -gt 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+progress_message3() # $* = Message
+{
+    local timestamp
+    timestamp=
+
+    if [ $VERBOSITY -ge 0 ]; then
+	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
+	echo "${timestamp}$@"
+    fi
+}
+
+#
+# Undo the effect of 'separate_list()'
+#
+combine_list()
+{
+    local f
+    local o
+    o=
+
+    for f in $* ; do
+        o="${o:+$o,}$f"
+    done
+
+    echo $o
+}
+
+#
+# Validate an IP address
+#
+valid_address() {
+    local x
+    local y
+    local ifs
+    ifs=$IFS
+
+    IFS=.
+
+    for x in $1; do
+	case $x in
+	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
+		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
+                ;;
+	    *)
+	        IFS=$ifs
+		return 2
+		;;
+	esac
+    done
+
+    IFS=$ifs
+
+    return 0
+}
+
+#
+# Miserable Hack to work around broken BusyBox ash in OpenWRT
+#
+addr_comp() {
+    test $(bc <<EOF
+$1 > $2
+EOF
+) -eq 1
+
+}
+
+#
+# Enumerate the members of an IP range -- When using a shell supporting only
+# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
+#
+# Comes in two flavors:
+#
+# ip_range() - produces a mimimal list of network/host addresses that spans
+#              the range.
+#
+# ip_range_explicit() - explicitly enumerates the range.
+#
+ip_range() {
+    local first
+    local last
+    local l
+    local x
+    local y
+    local z
+    local vlsm
+
+    case $1 in
+	!*)
+	    #
+	    # Let iptables complain if it's a range
+	    #
+	    echo $1
+	    return
+	    ;;
+	[0-9]*.*.*.*-*.*.*.*)
+            ;;
+	*)
+	    echo $1
+	    return
+	    ;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
     fi
 
-    set_default_product
+    l=$(( $last + 1 ))
 
-    setup_product_environment
-fi
+    while addr_comp $l $first; do
+	vlsm=
+	x=31
+	y=2
+	z=1
+
+	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
+	    vlsm=/$x
+	    x=$(( $x - 1 ))
+	    z=$y
+	    y=$(( $y * 2 ))
+	done
+
+	echo $(encodeaddr $first)$vlsm
+	first=$(($first + $z))
+    done
+}
+
+ip_range_explicit() {
+    local first
+    local last
+
+    case $1 in
+    [0-9]*.*.*.*-*.*.*.*)
+	;;
+    *)
+	echo $1
+	return
+	;;
+    esac
+
+    first=$(decodeaddr ${1%-*})
+    last=$(decodeaddr ${1#*-})
+
+    if addr_comp $first $last; then
+	fatal_error "Invalid IP address range: $1"
+    fi
+
+    while ! addr_comp $first $last; do
+	echo $(encodeaddr $first)
+	first=$(($first + 1))
+    done
+}
+
+[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
+
+#
+# Netmask to VLSM
+#
+ip_vlsm() {
+    local mask
+    mask=$(decodeaddr $1)
+    local vlsm
+    vlsm=0
+    local x
+    x=$(( 128 << 24 )) # 0x80000000
+
+    while [ $(( $x & $mask )) -ne 0 ]; do
+	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
+	vlsm=$(($vlsm + 1))
+    done
+
+    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
+	echo "Invalid net mask: $1" >&2
+    else
+	echo $vlsm
+    fi
+}
+
+#
+# Set default config path
+#
+ensure_config_path() {
+    local F
+    F=${g_sharedir}/configpath
+    if [ -z "$CONFIG_PATH" ]; then
+	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
+	. $F
+    fi
+
+    if [ -n "$g_shorewalldir" ]; then
+	[ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ] || CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
+    fi
+}
+
+#
+# Get fully-qualified name of file
+#
+resolve_file() # $1 = file name
+{
+    local pwd
+    pwd=$PWD
+
+    case $1 in
+	/*)
+	    echo $1
+	    ;;
+	.)
+	    echo $pwd
+	    ;;
+	./*)
+	    echo ${pwd}${1#.}
+	    ;;
+	..)
+	    cd ..
+	    echo $PWD
+	    cd $pwd
+	    ;;
+	../*)
+	    cd ..
+	    resolve_file ${1#../}
+	    cd $pwd
+	    ;;
+	*)
+	    echo $pwd/$1
+	    ;;
+    esac
+}
+
+#
+# Determine how to do "echo -e"
+#
+
+find_echo() {
+    local result
+
+    result=$(echo "a\tb")
+    [ ${#result} -eq 3 ] && { echo echo; return; }
+
+    result=$(echo -e "a\tb")
+    [ ${#result} -eq 3 ] && { echo "echo -e"; return; }
+
+    result=$(which echo)
+    [ -n "$result" ] && { echo "$result -e"; return; }
+
+    echo echo
+}
+
+# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
+#
+#     None - No mktemp
+#     BSD  - BSD mktemp (Mandrake)
+#     STD  - mktemp.org mktemp
+#
+find_mktemp() {
+    local mktemp
+    mktemp=`mywhich mktemp 2> /dev/null`
+
+    if [ -n "$mktemp" ]; then
+	if qt mktemp -V ; then
+	    MKTEMP=STD
+	else
+	    MKTEMP=BSD
+	fi
+    else
+	MKTEMP=None
+    fi
+}
+
+#
+# create a temporary file. If a directory name is passed, the file will be created in
+# that directory. Otherwise, it will be created in a temporary directory.
+#
+mktempfile() {
+
+    [ -z "$MKTEMP" ] && find_mktemp
+
+    if [ $# -gt 0 ]; then
+	case "$MKTEMP" in
+	    BSD)
+		mktemp $1/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -p $1 shorewall.XXXXXX
+		;;
+	    None)
+		> $1/shorewall-$$ && echo $1/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    else
+	case "$MKTEMP" in
+	    BSD)
+		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
+		;;
+	    STD)
+		mktemp -t shorewall.XXXXXX
+		;;
+	    None)
+		rm -f ${TMPDIR:-/tmp}/shorewall-$$
+		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
+		;;
+	    *)
+		error_message "ERROR:Internal error in mktempfile"
+		;;
+	esac
+    fi
+}

Shorewall-core/lib.common

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall/lib.common
+# Shorewall 5.0 -- /usr/share/shorewall/lib.common.
 #
-#     (c) 2010-2018 - Tom Eastep (teastep@shorewall.net)
+#     (c) 2010-2015 - Tom Eastep (teastep@shorewall.net)
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -55,13 +55,13 @@ startup_error() # $* = Error Message
 
     case $COMMAND in
         start)
-	    mylogger daemon.err "ERROR:$g_product start failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product start failed:Firewall state not changed"
 	    ;;
 	restart)
-	    mylogger daemon.err "ERROR:$g_product restart failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product restart failed:Firewall state not changed"
 	    ;;
 	restore)
-	    mylogger daemon.err "ERROR:$g_product restore failed:Firewall state not changed"
+	    mylogger kern.err "ERROR:$g_product restore failed:Firewall state not changed"
 	    ;;
     esac
 
@@ -92,20 +92,18 @@ startup_error() # $* = Error Message
 #
 run_it() {
     local script
-    local options='-'
+    local options
 
     export VARDIR
 
     script=$1
     shift
 
-
-    if [ "$g_debugging" = debug ]; then
-	options='-D'
-    elif [ "$g_debugging" = trace ]; then
-	options='-T'
+    if [ x$1 = xtrace -o x$1 = xdebug ]; then
+	options="$1 -"
+	shift;
     else
-	options='-';
+	options='-'
     fi
 
     [ -n "$g_noroutes" ]   && options=${options}n
@@ -271,48 +269,53 @@ loadmodule() # $1 = module name, $2 - * arguments
 {
     local modulename
     modulename=$1
-    shift
-    local moduleoptions
-    moduleoptions=$*
     local modulefile
     local suffix
 
     if [ -d /sys/module/ ]; then
 	if ! list_search $modulename $DONT_LOAD; then
 	    if [ ! -d /sys/module/$modulename ]; then
-		case $moduleloader in
-		    insmod)
-			for directory in $moduledirectories; do
-			    for modulefile in $directory/${modulename}.*; do
-				if [ -f $modulefile ]; then
-				    insmod $modulefile $moduleoptions
-				    return
-				fi
-			    done
-			done
-			;;
-		    *)
-			modprobe -q $modulename $moduleoptions
-			;;
-		esac
-	    fi
-	fi
-    elif ! list_search $modulename $DONT_LOAD $MODULES; then
-	case $moduleloader in
-	    insmod)
-		for directory in $moduledirectories; do
-		    for modulefile in $directory/${modulename}.*; do
+		shift
+
+		for suffix in $MODULE_SUFFIX ; do
+		    for directory in $moduledirectories; do
+			modulefile=$directory/${modulename}.${suffix}
+
 			if [ -f $modulefile ]; then
-			    insmod $modulefile $moduleoptions
-			    return
+			    case $moduleloader in
+				insmod)
+				    insmod $modulefile $*
+				    ;;
+				*)
+				    modprobe $modulename $*
+				    ;;
+			    esac
+			    break 2
 			fi
 		    done
 		done
-		;;
-	    *)
-		modprobe -q $modulename $moduleoptions
-		;;
-	esac
+	    fi
+	fi
+    elif ! list_search $modulename $DONT_LOAD $MODULES; then
+	shift
+
+	for suffix in $MODULE_SUFFIX ; do
+	    for directory in $moduledirectories; do
+		modulefile=$directory/${modulename}.${suffix}
+
+		if [ -f $modulefile ]; then
+		    case $moduleloader in
+			insmod)
+			    insmod $modulefile $*
+			    ;;
+			*)
+			    modprobe $modulename $*
+			    ;;
+		    esac
+		    break 2
+		fi
+	    done
+	done
     fi
 }
 
@@ -335,6 +338,8 @@ reload_kernel_modules() {
 	moduleloader=insmod
     fi
 
+    [ -n "${MODULE_SUFFIX:=ko ko.gz ko.xz o o.gz o.xz gz xz}" ]
+
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -389,6 +394,8 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	moduleloader=insmod
     fi
 
+    [ -n "${MODULE_SUFFIX:=o gz xz ko o.gz o.xz ko.gz ko.xz}" ]
+
     if [ -n "$MODULESDIR" ]; then
 	case "$MODULESDIR" in
 	    +*)
@@ -413,7 +420,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	[ -d $directory ] && moduledirectories="$moduledirectories $directory"
     done
 
-    modules=$(find_file helpers)
+    [ -n "$LOAD_HELPERS_ONLY" ] && modules=$(find_file helpers) || modules=$(find_file modules)
 
     if [ -f $modules -a -n "$moduledirectories" ]; then
 	[ -d /sys/module/ ] || MODULES=$(lsmod | cut -d ' ' -f1)
@@ -421,7 +428,7 @@ load_kernel_modules() # $1 = Yes, if we are to save moduleinfo in $VARDIR
 	. $modules
 	if [ $savemoduleinfo = Yes ]; then
 	    [ -d ${VARDIR} ] || mkdir -p ${VARDIR}
-	    echo MODULESDIR=\"$MODULESDIR\" > ${VARDIR}/.modulesdir
+	    echo MODULESDIR="$MODULESDIR" > ${VARDIR}/.modulesdir
 	    cp -f $modules ${VARDIR}/.modules
 	fi
     elif [ $savemoduleinfo = Yes ]; then
@@ -503,7 +510,7 @@ ip_network() {
 
 #
 # The following hack is supplied to compensate for the fact that many of
-# the popular light-weight Bourne shell derivatives do not support XOR ("^").
+# the popular light-weight Bourne shell derivatives don't support XOR ("^").
 #
 ip_broadcast() {
     local x
@@ -738,8 +745,8 @@ truncate() # $1 = length
 
 #
 # Call this function to assert mutual exclusion with Shorewall. If you invoke the
-# /sbin/shorewall program while holding mutual exclusion, you should pass -N as
-# the first argument. Example "shorewall -N refresh"
+# /sbin/shorewall program while holding mutual exclusion, you should pass "nolock" as
+# the first argument. Example "shorewall nolock refresh"
 #
 # This function uses the lockfile utility from procmail if it exists.
 # Otherwise, it uses a somewhat race-prone algorithm to attempt to simulate the
@@ -753,44 +760,36 @@ mutex_on()
     lockf=${LOCKFILE:=${VARDIR}/lock}
     local lockpid
     local lockd
-    local lockbin
-    local openwrt
 
     MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60}
 
-    if [ -z "$g_havemutex" -a $MUTEX_TIMEOUT -gt 0 ]; then
+    if [ $MUTEX_TIMEOUT -gt 0 ]; then
 
 	lockd=$(dirname $LOCKFILE)
 
 	[ -d "$lockd" ] || mkdir -p "$lockd"
 
-	lockbin=$(mywhich lock)
-	[ -n "$lockbin" -a -h "$lockbin" ] && openwrt=Yes
-
 	if [ -f $lockf ]; then
 	    lockpid=`cat ${lockf} 2> /dev/null`
-	    if [ -z "$lockpid" ] || [ $lockpid = 0 ]; then
+	    if [ -z "$lockpid" -o $lockpid = 0 ]; then
 		rm -f ${lockf}
 		error_message "WARNING: Stale lockfile ${lockf} removed"
-	    elif [ -z "$openwrt" ]; then
-		if [ $lockpid -eq $$ ]; then
-                    fatal_error "Mutex_on confusion"
-		elif ! qt ps --pid ${lockpid}; then
-		    rm -f ${lockf}
-		    error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
-		fi
+	    elif [ $lockpid -eq $$ ]; then
+                return 0
+	    elif ! ps | grep -v grep | qt grep ${lockpid}; then
+		rm -f ${lockf}
+		error_message "WARNING: Stale lockfile ${lockf} from pid ${lockpid} removed"
 	    fi
 	fi
 
-	if [ -n "$openwrt" ]; then
-	    lock ${lockf} || fatal_error "Can't lock ${lockf}"
-	    g_havemutex="lock -u ${lockf}"
-	elif qt mywhich lockfile; then
-	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf} || fatal_error "Can't lock ${lockf}"
-	    g_havemutex="rm -f ${lockf}"
+	if qt mywhich lockfile; then
+	    lockfile -${MUTEX_TIMEOUT} -r1 ${lockf}
 	    chmod u+w ${lockf}
 	    echo $$ > ${lockf}
 	    chmod u-w ${lockf}
+	elif qt mywhich lock; then
+            lock ${lockf}
+            chmod u=r ${lockf}
 	else
 	    while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do
 		sleep 1
@@ -800,15 +799,10 @@ mutex_on()
 	    if  [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then
 	        # Create the lockfile
 		echo $$ > ${lockf}
-		g_havemutex="rm -f ${lockf}"
 	    else
 		echo "Giving up on lock file ${lockf}" >&2
 	    fi
 	fi
-
-	if [ -n "$g_havemutex" ]; then
-	    trap mutex_off EXIT
-	fi
     fi
 }
 
@@ -817,10 +811,7 @@ mutex_on()
 #
 mutex_off()
 {
-    if [ -n "$g_havemutex" ]; then
-	eval $g_havemutex
-	g_havemutex=
-	trap '' exit
-    fi
+    [ -f ${CONFDIR}/rc.common ] && lock -u ${LOCKFILE:=${VARDIR}/lock}
+    rm -f ${LOCKFILE:=${VARDIR}/lock}
 }
 

Shorewall-core/lib.core

@@ -1,447 +0,0 @@
-#
-# Shorewall 5.2 -- /usr/share/shorewall/lib.core
-#
-#     (c) 1999-2017 - Tom Eastep (teastep@shorewall.net)
-#
-#	Complete documentation is available at https://shorewall.org
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# This library contains the code common to all Shorewall components except the
-# generated scripts.
-#
-
-SHOREWALL_LIBVERSION=50108
-
-#
-# Fatal Error
-#
-fatal_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 2
-}
-
-setup_product_environment() { # $1 = if non-empty, source shorewallrc again now that we have the correct product
-    g_basedir=${SHAREDIR}/shorewall
-
-    g_sharedir="$SHAREDIR"/$PRODUCT
-    g_confdir="$CONFDIR"/$PRODUCT
-
-    case $PRODUCT in
-	shorewall)
-	    g_product="Shorewall"
-	    g_family=4
-	    g_tool=iptables
-	    g_lite=
-	    ;;
-	shorewall6)
-	    g_product="Shorewall6"
-	    g_family=6
-	    g_tool=ip6tables
-	    g_lite=
-	    ;;
-	shorewall-lite)
-	    g_product="Shorewall Lite"
-	    g_family=4
-	    g_tool=iptables
-	    g_lite=Yes
-	    ;;
-	shorewall6-lite)
-	    g_product="Shorewall6 Lite"
-	    g_family=6
-	    g_tool=ip6tables
-	    g_lite=Yes
-	    ;;
-	*)
-	    fatal_error "Unknown PRODUCT ($PRODUCT)"
-	    ;;
-    esac
-
-    [ -f ${SHAREDIR}/${PRODUCT}/version ] || fatal_error "$g_product does not appear to be installed on this system"
-    #
-    # We need to do this again, now that we have the correct product
-    #
-    [ -n "$1" ] && . ${g_basedir}/shorewallrc
-
-    if [ -z "${VARLIB}" ]; then
-	VARLIB=${VARDIR}
-	VARDIR=${VARLIB}/${PRODUCT}
-    elif [ -z "${VARDIR}" ]; then
-	VARDIR="${VARLIB}/${PRODUCT}"
-    fi
-}
-
-set_default_product() {
-    case $(basename $0) in
-	shorewall6)
-	    PRODUCT=shorewall6
-	    ;;
-	shorewall4)
-	    PRODUCT=shorewall
-	    ;;
-	shorewall-lite)
-	    PRODUCT=shorewall-lite
-	    ;;
-	shorewall6-lite)
-	    PRODUCT=shorewall6-lite
-	    ;;
-	*)
-	    if [ -f ${g_basedir}/version ]; then
-		PRODUCT=shorewall
-	    elif [ -f ${SHAREDIR}/shorewall-lite/version ]; then
-		PRODUCT=shorewall-lite
-	    elif [ -f ${SHAREDIR}/shorewall6-lite/version ]; then
-		PRODUCT=shorewall6-lite
-	    else
-		fatal_error "No Shorewall firewall product is installed"
-	    fi
-	    ;;
-    esac
-}
-
-# Not configured Error
-#
-not_configured_error() # $@ = Message
-{
-    echo "   ERROR: $@" >&2
-    exit 6
-}
-
-#
-# Conditionally produce message
-#
-progress_message() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -gt 1 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-progress_message2() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -gt 0 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-progress_message3() # $* = Message
-{
-    local timestamp
-    timestamp=
-
-    if [ $VERBOSITY -ge 0 ]; then
-	[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
-	echo "${timestamp}$@"
-    fi
-}
-
-#
-# Undo the effect of 'separate_list()'
-#
-combine_list()
-{
-    local f
-    local o
-    o=
-
-    for f in $* ; do
-        o="${o:+$o,}$f"
-    done
-
-    echo $o
-}
-
-#
-# Validate an IP address
-#
-valid_address() {
-    local x
-    local y
-    local ifs
-    ifs=$IFS
-
-    IFS=.
-
-    for x in $1; do
-	case $x in
-	    [0-9]|[0-9][0-9]|[1-2][0-9][0-9])
-		[ $x -lt 256 ] || { IFS=$ifs; return 2; }
-                ;;
-	    *)
-	        IFS=$ifs
-		return 2
-		;;
-	esac
-    done
-
-    IFS=$ifs
-
-    return 0
-}
-
-#
-# Miserable Hack to work around broken BusyBox ash in OpenWRT
-#
-addr_comp() {
-    test $(bc <<EOF
-$1 > $2
-EOF
-) -eq 1
-
-}
-
-#
-# Enumerate the members of an IP range -- When using a shell supporting only
-# 32-bit signed arithmetic, the range cannot span 128.0.0.0.
-#
-# Comes in two flavors:
-#
-# ip_range() - produces a mimimal list of network/host addresses that spans
-#              the range.
-#
-# ip_range_explicit() - explicitly enumerates the range.
-#
-ip_range() {
-    local first
-    local last
-    local l
-    local x
-    local y
-    local z
-    local vlsm
-
-    case $1 in
-	!*)
-	    #
-	    # Let iptables complain if it's a range
-	    #
-	    echo $1
-	    return
-	    ;;
-	[0-9]*.*.*.*-*.*.*.*)
-            ;;
-	*)
-	    echo $1
-	    return
-	    ;;
-    esac
-
-    first=$(decodeaddr ${1%-*})
-    last=$(decodeaddr ${1#*-})
-
-    if addr_comp $first $last; then
-	fatal_error "Invalid IP address range: $1"
-    fi
-
-    l=$(( $last + 1 ))
-
-    while addr_comp $l $first; do
-	vlsm=
-	x=31
-	y=2
-	z=1
-
-	while [ $(( $first % $y )) -eq 0 ] && ! addr_comp $(( $first + $y )) $l; do
-	    vlsm=/$x
-	    x=$(( $x - 1 ))
-	    z=$y
-	    y=$(( $y * 2 ))
-	done
-
-	echo $(encodeaddr $first)$vlsm
-	first=$(($first + $z))
-    done
-}
-
-ip_range_explicit() {
-    local first
-    local last
-
-    case $1 in
-    [0-9]*.*.*.*-*.*.*.*)
-	;;
-    *)
-	echo $1
-	return
-	;;
-    esac
-
-    first=$(decodeaddr ${1%-*})
-    last=$(decodeaddr ${1#*-})
-
-    if addr_comp $first $last; then
-	fatal_error "Invalid IP address range: $1"
-    fi
-
-    while ! addr_comp $first $last; do
-	echo $(encodeaddr $first)
-	first=$(($first + 1))
-    done
-}
-
-[ -z "$LEFTSHIFT" ] && . ${g_basedir}/lib.common
-
-#
-# Netmask to VLSM
-#
-ip_vlsm() {
-    local mask
-    mask=$(decodeaddr $1)
-    local vlsm
-    vlsm=0
-    local x
-    x=$(( 128 << 24 )) # 0x80000000
-
-    while [ $(( $x & $mask )) -ne 0 ]; do
-	[ $mask -eq $x ] && mask=0 || mask=$(( $mask $LEFTSHIFT 1 )) # Not all shells shift 0x80000000 left properly.
-	vlsm=$(($vlsm + 1))
-    done
-
-    if [ $(( $mask & 2147483647 )) -ne 0 ]; then # 2147483647 = 0x7fffffff
-	echo "Invalid net mask: $1" >&2
-    else
-	echo $vlsm
-    fi
-}
-
-#
-# Set default config path
-#
-ensure_config_path() {
-    local F
-    F=${g_sharedir}/configpath
-    if [ -z "$CONFIG_PATH" ]; then
-	[ -f $F ] || { echo "   ERROR: $F does not exist"; exit 2; }
-	. $F
-    fi
-
-    if [ -n "$g_shorewalldir" ] && [ "${CONFIG_PATH%%:*}" = "$g_shorewalldir" ];then
-	case $CONFIG_PATH in
-	    :*)
-		CONFIG_PATH=${g_shorewalldir}${CONFIG_PATH}
-		;;
-	    *)
-		CONFIG_PATH=$g_shorewalldir:$CONFIG_PATH
-		;;
-	esac
-    fi
-}
-
-#
-# Get fully-qualified name of file
-#
-resolve_file() # $1 = file name
-{
-    local pwd
-    pwd=$PWD
-
-    case $1 in
-	/*)
-	    echo $1
-	    ;;
-	.)
-	    echo $pwd
-	    ;;
-	./*)
-	    echo ${pwd}${1#.}
-	    ;;
-	..)
-	    cd ..
-	    echo $PWD
-	    cd $pwd
-	    ;;
-	../*)
-	    cd ..
-	    resolve_file ${1#../}
-	    cd $pwd
-	    ;;
-	*)
-	    echo $pwd/$1
-	    ;;
-    esac
-}
-
-# Determine which version of mktemp is present (if any) and set MKTEMP accortingly:
-#
-#     None - No mktemp
-#     BSD  - BSD mktemp (Mandrake)
-#     STD  - mktemp.org mktemp
-#
-find_mktemp() {
-    local mktemp
-    mktemp=`mywhich mktemp 2> /dev/null`
-
-    if [ -n "$mktemp" ]; then
-	if qt mktemp -V ; then
-	    MKTEMP=STD
-	else
-	    MKTEMP=BSD
-	fi
-    else
-	MKTEMP=None
-    fi
-}
-
-#
-# create a temporary file. If a directory name is passed, the file will be created in
-# that directory. Otherwise, it will be created in a temporary directory.
-#
-mktempfile() {
-
-    [ -z "$MKTEMP" ] && find_mktemp
-
-    if [ $# -gt 0 ]; then
-	case "$MKTEMP" in
-	    BSD)
-		mktemp $1/shorewall.XXXXXX
-		;;
-	    STD)
-		mktemp -p $1 shorewall.XXXXXX
-		;;
-	    None)
-		> $1/shorewall-$$ && echo $1/shorewall-$$
-		;;
-	    *)
-		error_message "ERROR:Internal error in mktempfile"
-		;;
-	esac
-    else
-	case "$MKTEMP" in
-	    BSD)
-		mktemp ${TMPDIR:-/tmp}/shorewall.XXXXXX
-		;;
-	    STD)
-		mktemp -t shorewall.XXXXXX
-		;;
-	    None)
-		rm -f ${TMPDIR:-/tmp}/shorewall-$$
-		> ${TMPDIR:-}/shorewall-$$ && echo ${TMPDIR:-/tmp}/shorewall-$$
-		;;
-	    *)
-		error_message "ERROR:Internal error in mktempfile"
-		;;
-	esac
-    fi
-}

Shorewall-core/lib.installer

@@ -1,88 +0,0 @@
-#
-# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
-#
-#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
-#
-#	Complete documentation is available at https://shorewall.org
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# The purpose of this library is to hold those functions used by the products installer.
-#
-#########################################################################################
-
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-delete_file() # $1 = file to delete
-{
-    rm -f $1
-}
-
-require()
-{
-    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
-}
-
-make_directory() # $1 = directory , $2 = mode
-{
-    mkdir $1
-    chmod $2 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
-}
-
-make_parent_directory() # $1 = directory , $2 = mode
-{
-    mkdir -p $1
-    chmod $2 $1
-    [ -n "$OWNERSHIP" ] && chown $OWNER:$GROUP $1
-}
-
-cant_autostart()
-{
-    echo
-    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
-}

Shorewall-core/lib.uninstaller

@@ -1,105 +0,0 @@
-#
-# Shorewall 5.2 -- /usr/share/shorewall/lib.installer
-#
-#     (c) 2017 - Tom Eastep (teastep@shorewall.net)
-#     (c) 2017 - Matt Darfeuille (matdarf@gmail.com)
-#
-#	Complete documentation is available at https://shorewall.org
-#
-#       This program is part of Shorewall.
-#
-#	This program is free software; you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by the
-#       Free Software Foundation, either version 2 of the license or, at your
-#       option, any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# The purpose of this library is to hold those functions used by the products uninstaller.
-#
-#########################################################################################
-
-fatal_error()
-{
-    echo "   ERROR: $@" >&2
-    exit 1
-}
-
-split() {
-    local ifs
-    ifs=$IFS
-    IFS=:
-    set -- $1
-    echo $*
-    IFS=$ifs
-}
-
-qt()
-{
-    "$@" >/dev/null 2>&1
-}
-
-mywhich() {
-    local dir
-
-    for dir in $(split $PATH); do
-	if [ -x $dir/$1 ]; then
-	    return 0
-	fi
-    done
-
-    return 2
-}
-
-remove_file() # $1 = file to remove
-{
-    if [ -n "$1" ] ; then
-        if [ -f $1 -o -h $1 ] ; then
-            rm -f $1
-            echo "$1 Removed"
-        fi
-    fi
-}
-
-remove_directory() # $1 = directory to remove
-{
-    if [ -n "$1" ] ; then
-        if [ -d $1 ] ; then
-            rm -rf $1
-            echo "$1 Removed"
-        fi
-    fi
-}
-
-remove_file_with_wildcard() # $1 = file with wildcard to remove
-{
-    if [ -n "$1" ] ; then
-        for f in $1; do
-            if [ -d $f ] ; then
-                rm -rf $f
-                echo "$f Removed"
-            elif [ -f $f -o -h $f ] ; then
-                rm -f $f
-                echo "$f Removed"
-            fi
-        done
-    fi
-}
-
-restore_file() # $1 = file to restore
-{
-    if [ -f ${1}-shorewall.bkout ]; then
-	if (mv -f ${1}-shorewall.bkout $1); then
-	    echo
-	    echo "$1 restored"
-        else
-	    exit 1
-        fi
-    fi
-}

Shorewall-core/shorewallrc.alt

@@ -1,25 +0,0 @@
-#
-# ALT/BaseALT/ALTLinux Shorewall 5.2 rc file
-#
-BUILD=                                  #Default is to detect the build system
-HOST=alt
-PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/libexec            #Directory for executable scripts.
-PERLLIBDIR=${SHAREDIR}/perl5            #Directory to install Shorewall Perl module directory
-CONFDIR=/etc                            #Directory where subsystem configurations are installed
-SBINDIR=/sbin                           #Directory where system administration programs are installed
-MANDIR=${SHAREDIR}/man                  #Directory where manpages are installed.
-INITDIR=${CONFDIR}/rc.d/init.d          #Directory where SysV init scripts are installed.
-INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
-INITSOURCE=init.alt.sh                  #Name of the distributed file to be installed as the SysV init script
-ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
-SYSCONFFILE=sysconfig                   #Name of the distributed file to be installed as $SYSCONFDIR/$PRODUCT
-SERVICEFILE=                            #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
-SYSCONFDIR=/etc/sysconfig/              #Directory where SysV init parameter files are installed
-SERVICEDIR=/lib/systemd/system          #Directory where .service files are installed (systems running systemd only)
-SPARSE=                                 #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
-VARLIB=/var/lib                         #Directory where product variable data is stored.
-VARDIR=${VARLIB}/$PRODUCT               #Directory where product variable data is stored.
-DEFAULT_PAGER=/usr/bin/less             #Pager to use if none specified in shorewall[6].conf

Shorewall-core/shorewallrc.apple

@@ -1,5 +1,5 @@
 #
-# Apple OS X Shorewall 5.2 rc file
+# Apple OS X Shorewall 5.0 rc file
 #
 BUILD=apple
 HOST=apple

Shorewall-core/shorewallrc.archlinux

@@ -1,5 +1,5 @@
 #
-# Arch Linux Shorewall 5.2 rc file
+# Arch Linux Shorewall 5.0 rc file
 #
 BUILD=                                 #Default is to detect the build system
 HOST=archlinux

Shorewall-core/shorewallrc.cygwin

@@ -1,5 +1,5 @@
 #
-# Cygwin Shorewall 5.2 rc file
+# Cygwin Shorewall 5.0 rc file
 #
 BUILD=cygwin
 HOST=cygwin

Shorewall-core/shorewallrc.debian.systemd

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.2 rc file
+# Debian Shorewall 4.5 rc file
 #
 BUILD=					#Default is to detect the build system
 HOST=debian
@@ -13,13 +13,12 @@ MANDIR=${PREFIX}/share/man		#Directory where manpages are installed.
 INITDIR=				#Directory where SysV init scripts are installed.
 INITFILE=				#Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh		#Name of the distributed file to be installed as the SysV init script
-ANNOTATED=				#If non-empty, annotated configuration files are installed
-SYSCONFFILE=default.debian.systemd	#Name of the distributed file to be installed in $SYSCONFDIR
-SERVICEFILE=$PRODUCT.service.debian	#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
+ANNOTATED=				#If non-zero, annotated configuration files are installed
+SYSCONFFILE=default.debian		#Name of the distributed file to be installed in $SYSCONFDIR
+SERVICEFILE=$PRODUCT.service.debian     #Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default			#Directory where SysV init parameter files are installed
 SERVICEDIR=/lib/systemd/system		#Directory where .service files are installed (systems running systemd only)
 SPARSE=Yes				#If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR
 VARLIB=/var/lib				#Directory where product variable data is stored.
 VARDIR=${VARLIB}/$PRODUCT		#Directory where product variable data is stored.
 DEFAULT_PAGER=/usr/bin/less		#Pager to use if none specified in shorewall[6].conf
-STOPSERVICEFILE=stop_service.debian	#Name of script to stop systemd service that honours `SAFESTOP`.

Shorewall-core/shorewallrc.debian.sysvinit

@@ -1,5 +1,5 @@
 #
-# Debian Shorewall 5.2 rc file
+# Debian Shorewall 4.5 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=debian
@@ -14,7 +14,7 @@ INITDIR=/etc/init.d                     #Directory where SysV init scripts are i
 INITFILE=$PRODUCT                       #Name of the product's installed SysV init script
 INITSOURCE=init.debian.sh               #Name of the distributed file to be installed as the SysV init script
 ANNOTATED=                              #If non-zero, annotated configuration files are installed
-SYSCONFFILE=default.debian.sysvinit              #Name of the distributed file to be installed in $SYSCONFDIR
+SYSCONFFILE=default.debian              #Name of the distributed file to be installed in $SYSCONFDIR
 SERVICEFILE=				#Name of the file to install in $SYSTEMD. Default is $PRODUCT.service
 SYSCONFDIR=/etc/default                 #Directory where SysV init parameter files are installed
 SERVICEDIR=				#Directory where .service files are installed (systems running systemd only)

Shorewall-core/shorewallrc.default

@@ -1,8 +1,8 @@
 #
-# Default Shorewall 5.2 rc file
+# Default Shorewall 5.0 rc file
 #
-BUILD=                                  #Default is to detect the build system
 HOST=linux                              #Generic Linux
+BUILD=                                  #Default is to detect the build system
 PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
 SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.

Shorewall-core/shorewallrc.openwrt

@@ -1,8 +1,8 @@
 #
-# OpenWRT/LEDE Shorewall 5.2 rc file
+# Created by Shorewall Core version 5.0.2-RC1 configure -  Fri, Nov 06, 2015 10:02:03 AM
+#
+# Input: host=openwrt
 #
-BUILD=                                 #Default is to detect the build system
-HOST=openwrt
 PREFIX=/usr                             #Top-level directory for shared files, libraries, etc.
 SHAREDIR=${PREFIX}/share                #Directory for arch-neutral files.
 LIBEXECDIR=${PREFIX}/share              #Directory for executable scripts.

Shorewall-core/shorewallrc.redhat

@@ -1,5 +1,5 @@
 #
-# RedHat/FedoraShorewall 5.2 rc file
+# RedHat/FedoraShorewall 5.0 rc file
 #
 BUILD=                                  #Default is to detect the build system
 HOST=redhat

Shorewall-core/shorewallrc.sandbox

@@ -1,28 +0,0 @@
-#
-# Shorewall 5.2 rc file for installing into a Sandbox
-#
-BUILD=                                       # Default is to detect the build system
-HOST=linux
-INSTALLDIR=				     # Set this to the directory where you want Shorewall installed
-PREFIX=${INSTALLDIR}/usr		     # Top-level directory for shared files, libraries, etc.
-SHAREDIR=${PREFIX}/share		     # Directory for arch-neutral files.
-LIBEXECDIR=${PREFIX}/share		     # Directory for executable scripts.	
-PERLLIBDIR=${PREFIX}/share/shorewall	     # Directory to install Shorewall Perl module directory	
-CONFDIR=${INSTALLDIR}/etc		     # Directory where subsystem configurations are installed				
-SBINDIR=${INSTALLDIR}/sbin		     # Directory where system administration programs are installed			
-MANDIR=		     			     # Leave empty
-INITDIR=				     # Leave empty				     				
-INITSOURCE=				     # Leave empty
-INITFILE=				     # Leave empty
-AUXINITSOURCE=				     # Leave empty
-AUXINITFILE=				     # Leave empty
-SERVICEDIR=				     # Leave empty
-SERVICEFILE=    			     # Leave empty
-SYSCONFFILE=				     # Leave empty
-SYSCONFDIR=				     # Leave empty			
-SPARSE=					     # Leave empty			
-ANNOTATED=				     # If non-empty, annotated configuration files are installed				
-VARLIB=${INSTALLDIR}/var/lib		     # Directory where product variable data is stored.				
-VARDIR=${VARLIB}/$PRODUCT		     # Directory where product variable data is stored.		
-DEFAULT_PAGER=/usr/bin/less		     # Pager to use if none specified in shorewall[6].conf
-SANDBOX=Yes				     # Indicates SANDBOX installation

Shorewall-core/shorewallrc.slackware

@@ -1,5 +1,5 @@
 #
-# Slackware Shorewall 5.2 rc file
+# Slackware Shorewall 5.0 rc file
 #
 BUILD=slackware
 HOST=slackware

Shorewall-core/shorewallrc.suse

@@ -1,5 +1,5 @@
 #
-# SuSE Shorewall 5.2 rc file
+# SuSE Shorewall 5.0 rc file
 #
 BUILD=                                                #Default is to detect the build system
 HOST=suse

Shorewall-core/stop_service.debian

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-PRODUCT=$1
-
-. /etc/default/${PRODUCT}
-
-if [ "$SAFESTOP" = 1 ]; then
-  COMMAND=stop
-else
-  COMMAND=clear
-fi
-
-if [ "${PRODUCT}" = shorewall6 ]; then
-  EXEC="/sbin/shorewall -6"
-else
-  EXEC="/sbin/${PRODUCT}"
-fi
-
-exec ${EXEC} ${OPTIONS} ${COMMAND}

Shorewall-core/uninstall.sh

@@ -1,10 +1,10 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall Core Modules
+# Script to back uninstall Shoreline Firewall
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://www.shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -26,75 +26,64 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
-PRODUCT=shorewall-core
+VERSION=xxx #The Build script inserts the actual version
+PRODUCT="shorewall-core"
 Product="Shorewall Core"
-
+ 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
+    echo "usage: $ME [ <shorewallrc file> ]"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+restore_file() # $1 = file to restore
+{
+    if [ -f ${1}-shorewall.bkout ]; then
+	if (mv -f ${1}-shorewall.bkout $1); then
+	    echo
+	    echo "$1 restored"
+        else
+	    exit 1
+        fi
+    fi
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
-#
-# Parse the run line
-#
-finished=0
-
-while [ $finished -eq 0 ]; do
-    option=$1
-
-    case "$option" in
-	-*)
-	    option=${option#-}
-
-	    while [ -n "$option" ]; do
-		case $option in
-		    h)
-			usage 0
-			;;
-		    v)
-			echo "$Product Firewall Uninstaller Version $VERSION"
-			exit 0
-			;;
-		    *)
-			usage 1
-			;;
-		esac
-	    done
-
-	    shift
-	    ;;
-	*)
-	    finished=1
-	    ;;
-    esac
-done
-
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -104,11 +93,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -116,27 +105,20 @@ fi
 if [ -f ${SHAREDIR}/shorewall/coreversion ]; then
     INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall/coreversion)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Core Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Core Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+echo "Uninstalling Shorewall Core $VERSION"
 
-if [ -n "${MANDIR}" ]; then
-    remove_file_with_wildcard ${MANDIR}/man5/shorewall\*
-    remove_file_with_wildcard ${MANDIR}/man8/shorewall\*
-fi
+rm -rf ${SHAREDIR}/shorewall
+rm -f ~/.shorewallrc
+
+echo "Shorewall Core Uninstalled"
 
-remove_directory ${SHAREDIR}/shorewall
-remove_file ~/.shorewallrc
-remove_file ${SBINDIR}/shorewall
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"

Shorewall-core/wait4ifup

@@ -1,12 +1,12 @@
 #!/bin/sh
 #
-#     Shorewall interface helper utility - V5.2
+#     Shorewall interface helper utility - V4.2
 #
 #     (c) 2007,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	This file is installed in /usr/share/shorewall/wait4ifup
 #
-#	Shorewall documentation is available at https://shorewall.org
+#	Shorewall documentation is available at http://www.shorewall.net
 #
 #       This program is part of Shorewall.
 #

Shorewall-init/default.debian.systemd

@@ -1,21 +0,0 @@
-# List the Shorewall products that Shorewall-init is to
-# initialize (space-separated list).
-#
-# Sample: PRODUCTS="shorewall shorewall6"
-#
-PRODUCTS=""
-
-#
-# Set this to 1 if you want Shorewall-init to react to
-# ifup/ifdown and NetworkManager events
-#
-IFUPDOWN=0
-#
-# Where Up/Down events get logged
-#
-LOGFILE=/var/log/shorewall-ifupdown.log
-
-# Startup options - set verbosity to 0 (minimal reporting)
-OPTIONS="-V0"
-
-# IOF

Shorewall-init/default.debian.sysvinit

@@ -1,27 +0,0 @@
-# List the Shorewall products that Shorewall-init is to
-# initialize (space-separated list).
-#
-# Sample: PRODUCTS="shorewall shorewall6"
-#
-PRODUCTS=""
-
-#
-# Set this to 1 if you want Shorewall-init to react to
-# ifup/ifdown and NetworkManager events
-#
-IFUPDOWN=0
-#
-# Set this to the name of the file that is to hold
-# ipset contents. Shorewall-init will load those ipsets
-# during 'start' and will save them there during 'stop'.
-#
-SAVE_IPSETS=""
-#
-# Where Up/Down events get logged
-#
-LOGFILE=/var/log/shorewall-ifupdown.log
-
-# Startup options - set verbosity to 0 (minimal reporting)
-OPTIONS="-V0"
-
-# IOF

Shorewall-init/ifupdown.debian.sh

@@ -6,7 +6,7 @@
 #
 #     (c) 2010,2013 - Tom Eastep (teastep@shorewall.net)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://shorewall.net
 #
 #       This program is free software; you can redistribute it and/or modify
 #       it under the terms of Version 2 of the GNU General Public License
@@ -31,10 +31,8 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall ]; then
-	    ${SBINDIR}/shorewall compile
-	elif [ $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall -6 compile
+	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/$PRODUCT compile
 	fi
     fi
 }
@@ -110,7 +108,7 @@ case $0 in
 	;;
     *)
         #
-        # Debian ifupdown system - MODE and INTERFACE inherited from the environment
+        # Debian ifupdown system
         #
 	INTERFACE="$IFACE"
 
@@ -127,21 +125,10 @@ esac
 [ -n "$LOGFILE" ] || LOGFILE=/dev/null
 
 for PRODUCT in $PRODUCTS; do
-    if [ -n "$ADDRFAM" -a ${COMMAND} = up ]; then
-	case $PRODUCT in
-	    *6*)
-		[ ${ADDRFAM} = inet6 ] || continue
-		;;
-	    *)
-		[ ${ADDRFAM} = inet ] || continue
-		;;
-	esac
-    fi
-
     setstatedir
 
     if [ -x $VARLIB/$PRODUCT/firewall ]; then
-	( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
+	  ( ${VARLIB}/$PRODUCT/firewall -V0 $COMMAND $INTERFACE >> $LOGFILE 2>&1 ) || true
     fi
 done
 

Shorewall-init/ifupdown.fedora.sh

@@ -6,7 +6,7 @@
 #
 #     (c) 2010,2013 - Tom Eastep (teastep@shorewall.net)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://shorewall.net
 #
 #       This program is free software; you can redistribute it and/or modify
 #       it under the terms of Version 2 of the GNU General Public License
@@ -33,11 +33,9 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall ]; then
-	    ${SBINDIR}/shorewall compile
-	elif [ $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall -6 compile
+    if [ ! -x "$STATEDIR/firewall" ]; then
+	if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
+	    ${SBINDIR}/$PRODUCT $OPTIONS compile
 	fi
     fi
 }
@@ -90,14 +88,7 @@ case $0 in
 		COMMAND=down
 		;;
 	    *dispatcher.d*)
-		case "$2" in
-		    up|down)
-			COMMAND="$2"
-			;;
-		    *)
-			exit 0
-			;;
-		esac
+		COMMAND="$2"
 		;;
 	    *)
 		exit 0

Shorewall-init/ifupdown.suse.sh

@@ -6,7 +6,7 @@
 #
 #     (c) 2010,2013 - Tom Eastep (teastep@shorewall.net)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://shorewall.net
 #
 #       This program is free software; you can redistribute it and/or modify
 #       it under the terms of Version 2 of the GNU General Public License
@@ -31,10 +31,8 @@ setstatedir() {
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
     if [ ! -x $STATEDIR/firewall ]; then
-	if [ $PRODUCT = shorewall ]; then
-	    ${SBINDIR}/shorewall compile
-	elif [ $PRODUCT = shorewall6 ]; then
-	    ${SBINDIR}/shorewall -6 compile
+	if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	    ${SBINDIR}/$PRODUCT compile
 	fi
     fi
 }
@@ -120,14 +118,7 @@ case $0 in
 	case $0 in
 	    *dispatcher.d*)
 		INTERFACE="$1"
-		case "$2" in
-		    up|down)
-			COMMAND="$2"
-			;;
-		    *)
-			exit 0
-			;;
-		esac
+		COMMAND="$2"
 		;;
 	    *if-up.d*)
 		COMMAND=up

Shorewall-init/init.alt.sh

@@ -1,150 +0,0 @@
-#!/bin/sh
-#
-# Shorewall init script
-#
-# chkconfig: - 09 91
-# description: Initialize the shorewall firewall at boot time
-#
-### BEGIN INIT INFO
-# Provides: shorewall-init
-# Required-Start: $local_fs
-# Required-Stop: $local_fs
-# Default-Start: 3 4 5
-# Default-Stop:  0 1 2 6
-# Short-Description: Initialize the shorewall firewall at boot time
-# Description:       Place the firewall in a safe state at boot time
-#                    prior to bringing up the network.
-### END INIT INFO
-
-# Do not load RH compatibility interface.
-WITHOUT_RC_COMPAT=1
-
-# Source function library.
-. /etc/init.d/functions
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-NAME="Shorewall-init firewall"
-PROG="shorewall-init"
-SHOREWALL="$SBINDIR/$PROG"
-LOGGER="logger -i -t $PROG"
-
-# Get startup options (override default)
-OPTIONS=
-
-LOCKFILE=/var/lock/subsys/shorewall-init
-
-# check if shorewall-init is configured or not
-if [ -f "/etc/sysconfig/shorewall-init" ]; then
-	. /etc/sysconfig/shorewall-init
-	if [ -z "$PRODUCTS" ]; then
-		echo "No PRODUCTS configured"
-		exit 6
-	fi
-else
-	echo "/etc/sysconfig/shorewall-init not found"
-	exit 6
-fi
-
-RETVAL=0
-
-# set the STATEDIR variable
-setstatedir() {
-	local statedir
-	if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
-		statedir=$( . /${CONFDIR}/${PRODUCT}/vardir && echo $VARDIR )
-	fi
-
-	[ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
-
-	if [ -x ${STATEDIR}/firewall ]; then
-		return 0
-	elif [ $PRODUCT = shorewall ]; then
-		${SBINDIR}/shorewall compile
-	elif [ $PRODUCT = shorewall6 ]; then
-		${SBINDIR}/shorewall -6 compile
-	else
-		return 1
-	fi
-}
-
-start() {
-	local PRODUCT
-	local STATEDIR
-
-	printf "Initializing \"Shorewall-based firewalls\": "
-
-	for PRODUCT in $PRODUCTS; do
-		if setstatedir; then
-			$STATEDIR/$PRODUCT/firewall ${OPTIONS} stop 2>&1 | "$LOGGER"
-			RETVAL=$?
-		else
-			RETVAL=6
-			break
-		fi
-	done
-
-	if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-		ipset -R < "$SAVE_IPSETS"
-	fi
-
-	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
-	return $RETVAL
-}
-
-stop() {
-	local PRODUCT
-	local STATEDIR
-
-	printf "Clearing \"Shorewall-based firewalls\": "
-	for PRODUCT in $PRODUCTS; do
-		if setstatedir; then
-			${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | "$LOGGER"
-			RETVAL=$?
-		else
-			RETVAL=6
-			break
-		fi
-	done
-
-	if [ -n "$SAVE_IPSETS" ]; then
-		mkdir -p $(dirname "$SAVE_IPSETS")
-		if ipset -S > "${SAVE_IPSETS}.tmp"; then
-			grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-		else
-			rm -f "${SAVE_IPSETS}.tmp"
-		fi
-	fi
-
-	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
-	return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-	start)
-	    start
-	    ;;
-	stop)
-	    stop
-	    ;;
-	restart|reload|condrestart|condreload)
-	    # "Not implemented"
-	    ;;
-	condstop)
-	    if [ -e "$LOCKFILE" ]; then
-		stop
-	    fi
-	    ;;
-	status)
-	    status "$PROG"
-	     RETVAL=$?
-	    ;;
-	*)
-	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|condrestart|condstop|status}"
-	    RETVAL=1
-esac
-
-exit $RETVAL

Shorewall-init/init.debian.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -8,7 +8,7 @@
 #
 #       On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#       Complete documentation is available at https://shorewall.org
+#       Complete documentation is available at http://shorewall.net
 #
 #       This program is free software; you can redistribute it and/or modify
 #       it under the terms of Version 2 of the GNU General Public License
@@ -73,16 +73,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-        return 0
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
     else
-        if [ $PRODUCT = shorewall ]; then
-            ${SBINDIR}/shorewall compile
-        elif [ $PRODUCT = shorewall6 ]; then
-            ${SBINDIR}/shorewall -6 compile
-        else
-            return 1
-        fi
+	return 0
     fi
 }
 
@@ -108,18 +102,20 @@ shorewall_start () {
   local PRODUCT
   local STATEDIR
 
-  printf "Initializing \"Shorewall-based firewalls\": "
+  echo -n "Initializing \"Shorewall-based firewalls\": "
 
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-          #
-	  # Run in a sub-shell to avoid name collisions
-	  #
-	  (
-	      if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		  ${STATEDIR}/firewall ${OPTIONS} stop
-	      fi
-	  )
+	  if [ -x ${STATEDIR}/firewall ]; then
+              #
+	      # Run in a sub-shell to avoid name collisions
+	      #
+	      (
+		  if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+		      ${STATEDIR}/firewall ${OPTIONS} stop
+		  fi
+	      )
+	  fi
       fi
   done
 
@@ -127,7 +123,7 @@ shorewall_start () {
 
   if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
 
-      printf "Restoring ipsets: "
+      echo -n "Restoring ipsets: "
 
       if ! ipset -R < "$SAVE_IPSETS"; then
 	  echo_notdone
@@ -144,10 +140,12 @@ shorewall_stop () {
   local PRODUCT
   local STATEDIR
 
-  printf "Clearing \"Shorewall-based firewalls\": "
+  echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 
@@ -159,9 +157,8 @@ shorewall_stop () {
 
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
       else
-	  rm -f "${SAVE_IPSETS}.tmp"
 	  echo_notdone
       fi
 

Shorewall-init/init.fedora.sh

@@ -44,14 +44,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall ]; then
-	${SBINDIR}/shorewall compile
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
+    if [ $PRODUCT == shorewall -o $PRODUCT == shorewall6 ]; then
+	${SBINDIR}/$PRODUCT $OPTIONS compile -c
     else
-	return 1
+	return 0
     fi
 }
 
@@ -66,22 +62,22 @@ start () {
 	return 6 #Not configured
     fi
 
-    printf "Initializing \"Shorewall-based firewalls\": "
-
-    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-	ipset -R < "$SAVE_IPSETS"
-    fi
+    echo -n "Initializing \"Shorewall-based firewalls\": "
 
     for PRODUCT in $PRODUCTS; do
 	setstatedir
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    ${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
-	    retval=${PIPESTATUS[0]}
-	    [ $retval -ne 0 ] && break
+	    if [ -x "${STATEDIR}/firewall" ]; then
+		${STATEDIR}/firewall ${OPTIONS} stop 2>&1 | $logger
+		retval=${PIPESTATUS[0]}
+		[ $retval -ne 0 ] && break
+	    else
+		retval=6 #Product not configured
+		break
+	    fi
 	else
-	    retval=6 #Product not configured
 	    break
 	fi
     done
@@ -101,32 +97,27 @@ stop () {
     local PRODUCT
     local STATEDIR
 
-    printf "Clearing \"Shorewall-based firewalls\": "
+    echo -n "Clearing \"Shorewall-based firewalls\": "
 
     for PRODUCT in $PRODUCTS; do
 	setstatedir
 	retval=$?
 
 	if [ $retval -eq 0 ]; then
-	    ${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
-	    retval=${PIPESTATUS[0]}
-	    [ $retval -ne 0 ] && break
+	    if [ -x "${STATEDIR}/firewall" ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear 2>&1 | $logger
+		retval=${PIPESTATUS[0]}
+		[ $retval -ne 0 ] && break
+	    else
+		retval=6 #Product not configured
+		break
+	    fi
 	else
-	    retval=6 #Product not configured
 	    break
 	fi
     done
 
     if [ $retval -eq 0 ]; then
-	if [ -n "$SAVE_IPSETS" ]; then
-	    mkdir -p $(dirname "$SAVE_IPSETS")
-	    if ipset -S > "${SAVE_IPSETS}.tmp"; then
-		grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-	    else
-		rm -f "${SAVE_IPSETS}.tmp"
-	    fi
-	fi
-
 	rm -f $lockfile
 	success
     else

Shorewall-init/init.openwrt.sh

@@ -1,5 +1,5 @@
 #!/bin/sh /etc/rc.common
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2016           - Matt Darfeuille (matdarf@gmail.com)
@@ -75,14 +75,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall ]; then
-	${SBINDIR}/shorewall compile
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
     else
-	return 1
+	return 0
     fi
 }
 
@@ -91,11 +87,13 @@ start () {
     local PRODUCT
   local STATEDIR
 
-  printf "Initializing \"Shorewall-based firewalls\": "
+  echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      ${STATEDIR}/firewall ${OPTIONS} stop
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -103,8 +101,6 @@ start () {
   if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
       ipset -R < "$SAVE_IPSETS"
   fi
-
-  return 0
 }
 
 boot () {
@@ -116,22 +112,20 @@ stop () {
     local PRODUCT
     local STATEDIR
 
-    printf "Clearing \"Shorewall-based firewalls\": "
+    echo -n "Clearing \"Shorewall-based firewalls\": "
     for PRODUCT in $PRODUCTS; do
 	if setstatedir; then
-	    ${STATEDIR}/firewall ${OPTIONS} clear
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
 	fi
     done
 
     if [ -n "$SAVE_IPSETS" ]; then
 	mkdir -p $(dirname "$SAVE_IPSETS")
 	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-	else
-	    rm -f "${SAVE_IPSETS}.tmp"
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
 	fi
     fi
-
-    return 0
 }
 

Shorewall-init/init.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     (c) 2010,2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
@@ -69,12 +69,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
 	${SBINDIR}/$PRODUCT ${OPTIONS} compile $STATEDIR/firewall
     else
-	return 1
+	return 0
     fi
 }
 
@@ -83,11 +81,13 @@ shorewall_start () {
   local PRODUCT
   local STATEDIR
 
-  printf "Initializing \"Shorewall-based firewalls\": "
+  echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      ${STATEDIR}/firewall ${OPTIONS} stop
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  ${STATEDIR}/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -104,19 +104,19 @@ shorewall_stop () {
   local PRODUCT
   local STATEDIR
 
-  printf "Clearing \"Shorewall-based firewalls\": "
+  echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-      else
-	  rm -f "${SAVE_IPSETS}.tmp"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
       fi
   fi
 

Shorewall-init/init.suse.sh

@@ -1,5 +1,5 @@
 #! /bin/bash
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -7,7 +7,7 @@
 #
 #       On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#       Complete documentation is available at https://shorewall.org
+#       Complete documentation is available at http://shorewall.net
 #
 #       This program is free software; you can redistribute it and/or modify
 #       it under the terms of Version 2 of the GNU General Public License
@@ -79,14 +79,10 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-	return 0
-    elif [ $PRODUCT = shorewall ]; then
-	${SBINDIR}/shorewall compile
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
     else
-	return 6
+	return 0
     fi
 }
 
@@ -95,11 +91,13 @@ shorewall_start () {
   local PRODUCT
   local STATEDIR
 
-  printf "Initializing \"Shorewall-based firewalls\": "
+  echo -n "Initializing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
-	      $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	  if [ -x $STATEDIR/firewall ]; then
+	      if ! ${SBIN}/$PRODUCT status > /dev/null 2>&1; then
+		  $STATEDIR/$PRODUCT/firewall ${OPTIONS} stop
+	      fi
 	  fi
       fi
   done
@@ -114,19 +112,19 @@ shorewall_stop () {
   local PRODUCT
   local STATEDIR
 
-  printf "Clearing \"Shorewall-based firewalls\": "
+  echo -n "Clearing \"Shorewall-based firewalls\": "
   for PRODUCT in $PRODUCTS; do
       if setstatedir; then
-	  ${STATEDIR}/firewall ${OPTIONS} clear
+	  if [ -x ${STATEDIR}/firewall ]; then
+	      ${STATEDIR}/firewall ${OPTIONS} clear
+	  fi
       fi
   done
 
   if [ -n "$SAVE_IPSETS" ]; then
       mkdir -p $(dirname "$SAVE_IPSETS")
       if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-      else
-	  rm -f "${SAVE_IPSETS}.tmp"
+	  grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
       fi
   fi
 }

Shorewall-init/install.sh

@@ -5,7 +5,7 @@
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2010 - Roberto C. Sanchez (roberto@connexer.com)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -27,21 +27,58 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version.
 PRODUCT=shorewall-init
 Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -n"
+    echo "usage: $ME [ <configuration-file> ]"
+    echo "       $ME -v"
+    echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
+fatal_error() 
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure shorewall init to start automatically at boot" >&2
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -60,16 +97,23 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 0755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+}
+
+require() 
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -90,7 +134,7 @@ while [ $finished -eq 0 ] ; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Installer Version $VERSION"
+			echo "Shorewall-init Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -115,17 +159,17 @@ done
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
+    #
+    # Load packager's settings if any
+    #
     if [ -f ./shorewallrc ]; then
-	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
-    elif [ -f ~/.shorewallrc ]; then
+	. ./shorewallrc || exit 1
 	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
-    elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
-    else
-	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
+    elif [ -f ~/.shorewallrc ]; then
+	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
+     else
+	fatal_error "No configuration file specified and ~/.shorewallrc not found"
     fi
 elif [ $# -eq 1 ]; then
     file=$1
@@ -133,11 +177,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -169,7 +213,7 @@ if [ -z "$BUILD" ]; then
 	    ;;
 	*)
 	    if [ -f /etc/os-release ]; then
-		ID=$(grep '^ID=' /etc/os-release | sed 's/ID=//; s/"//g;')
+		eval $(cat /etc/os-release | grep ^ID=)
 
 		case $ID in
 		    fedora|rhel|centos|foobar)
@@ -181,9 +225,6 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
-		    alt|basealt|altlinux)
-			BUILD=alt
-			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -194,8 +235,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
-	    elif [ -f /etc/altlinux-release ]; then
-		BUILD=alt
 	    elif [ -f /etc/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f /etc/SuSE-release ]; then
@@ -258,14 +297,13 @@ case "$HOST" in
     openwrt)
 	echo "Installing Openwrt-specific configuration..."
 	;;
-    alt)
-	echo "Installing ALT-specific configuration...";
-	;;
     linux)
-	fatal_error "Shorewall-init is not supported on this system"
+	echo "ERROR: Shorewall-init is not supported on this system" >&2
+	exit 1
 	;;
     *)
-	fatal_error "Unsupported HOST distribution: \"$HOST\""
+	echo "ERROR: Unsupported HOST distribution: \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
@@ -277,27 +315,30 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
     
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    make_directory ${DESTDIR}${INITDIR} 0755
 fi
 
-echo "Installing $Product Version $VERSION"
+echo "Installing Shorewall Init Version $VERSION"
 
 #
 # Check for /usr/share/shorewall-init/version
 #
-if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
+if [ -f ${DESTDIR}${SHAREDIR}/shorewall-init/version ]; then
     first_install=""
 else
     first_install="Yes"
 fi
 
-[ -n "$DESTDIR" ] && make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
+if [ -n "$DESTDIR" ]; then
+    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 0755 ${DESTDIR}${CONFDIR}/logrotate.d
+fi
 
 #
 # Install the Firewall Script
 #
 if [ -n "$INITFILE" ]; then
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    mkdir -p ${DESTDIR}${INITDIR}
     install_file $INITSOURCE ${DESTDIR}${INITDIR}/$INITFILE 0544
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${INITDIR}/$INITFILE
     
@@ -316,21 +357,25 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
     install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
-    [ -n "$DESTDIR" -o $configure -eq 0 ] && make_parent_directory ${DESTDIR}${SBINDIR} 0755
-    install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0700
-    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
-    echo "CLI installed as ${DESTDIR}${SBINDIR}/$PRODUCT"
+    if [ -n "$DESTDIR" -o $configure -eq 0 ]; then
+	mkdir -p ${DESTDIR}${SBINDIR}
+        chmod 0755 ${DESTDIR}${SBINDIR}
+    fi
+    install_file shorewall-init ${DESTDIR}${SBINDIR}/shorewall-init 0700
+    [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/shorewall-init
+    echo "CLI installed as ${DESTDIR}${SBINDIR}/shorewall-init"
 fi
 
 #
 # Create /usr/share/shorewall-init if needed
 #
-make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
+mkdir -p ${DESTDIR}${SHAREDIR}/shorewall-init
+chmod 0755 ${DESTDIR}${SHAREDIR}/shorewall-init
 
 #
 # Install logrotate file
@@ -343,52 +388,55 @@ fi
 #
 # Create the version file
 #
-echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/$PRODUCT/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+echo "$VERSION" > ${DESTDIR}/${SHAREDIR}/shorewall-init/version
+chmod 0644 ${DESTDIR}${SHAREDIR}/shorewall-init/version
 
 #
 # Remove and create the symbolic link to the init script
 #
 if [ -z "$DESTDIR" ]; then
-    rm -f ${SHAREDIR}/$PRODUCT/init
-    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/$PRODUCT/init
+    rm -f ${SHAREDIR}/shorewall-init/init
+    ln -s ${INITDIR}/${INITFILE} ${SHAREDIR}/shorewall-init/init
 fi
 
 if [ $HOST = debian ]; then
     if [ -n "${DESTDIR}" ]; then
-	make_parent_directory ${DESTDIR}${ETC}/network/if-up.d 0755
-	make_parent_directory ${DESTDIR}${ETC}/network/if-post-down.d 0755
+	mkdir -p ${DESTDIR}${ETC}/network/if-up.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-down.d/
+	mkdir -p ${DESTDIR}${ETC}/network/if-post-down.d/
     elif [ $configure -eq 0 ]; then
-	make_parent_directory ${CONFDIR}/network/if-up.d 0755
-	make_parent_directory ${CONFDIR}/network/if-post-down.d 0755
-	rm -f ${CONFDIR}/network/if-down.d/shorewall
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-up.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-down.d/
+	mkdir -p ${DESTDIR}${CONFDIR}/network/if-post-down.d/
     fi
 
-    if [ ! -f ${DESTDIR}${CONFDIR}/default/$PRODUCT ]; then
-	[ -n "${DESTDIR}" ] && make_parent_directory ${DESTDIR}${ETC}/default 0755
+    if [ ! -f ${DESTDIR}${CONFDIR}/default/shorewall-init ]; then
+	if [ -n "${DESTDIR}" ]; then
+	    mkdir -p ${DESTDIR}${ETC}/default
+	fi
 
-	[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/default 0755
-	install_file ${SYSCONFFILE} ${DESTDIR}${ETC}/default/$PRODUCT 0644
-	echo "${SYSCONFFILE} file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
+	[ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/default
+	install_file sysconfig ${DESTDIR}${ETC}/default/shorewall-init 0644
+	echo "sysconfig file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
     fi
 
     IFUPDOWN=ifupdown.debian.sh
 else
     if [ -n "$DESTDIR" ]; then
-	make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+	mkdir -p ${DESTDIR}${SYSCONFDIR}
 
 	if [ -z "$RPM" ]; then
 	    if [ $HOST = suse ]; then
-		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-up.d 0755
-		make_parent_directory ${DESTDIR}${ETC}/sysconfig/network/if-down.d 0755
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-up.d
+		mkdir -p ${DESTDIR}${ETC}/sysconfig/network/if-down.d
 	    elif [ $HOST = gentoo ]; then
 		# Gentoo does not support if-{up,down}.d
 		/bin/true
 	    elif [ $HOST = openwrt ]; then
-		# Not implemented on OpenWRT
+		# Not implemented on openwrt
 		/bin/true
-	    elif [ "$HOST" != debian ]; then
-		make_parent_directory ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d 0755
+	    else
+		mkdir -p ${DESTDIR}/${ETC}/NetworkManager/dispatcher.d
 	    fi
 	fi
     fi
@@ -410,36 +458,33 @@ if [ $HOST != openwrt ]; then
 
     [ "${SHAREDIR}" = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ifupdown
 
-    make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
+    mkdir -p ${DESTDIR}${LIBEXECDIR}/shorewall-init
 
-    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown 0544
+    install_file ifupdown ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown 0544
 fi
 
 if [ -d ${DESTDIR}/etc/NetworkManager ]; then
-    if [ "$HOST" = debian ]; then
-	rm -f ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall
-    else
-	[ $configure -eq 1 ] || make_parent_directory ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d 0755
-	install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
-    fi
+    [ $configure -eq 1 ] || mkdir -p ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/
+    install_file ifupdown ${DESTDIR}${ETC}/NetworkManager/dispatcher.d/01-shorewall 0544
 fi
 
 case $HOST in
     debian)
 	if [ $configure -eq 1 ]; then
 	    install_file ifupdown ${DESTDIR}/etc/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}/etc/network/if-down.d/shorewall 0544
 	    install_file ifupdown ${DESTDIR}/etc/network/if-post-down.d/shorewall 0544
-	    rm -f ${DESTDIR}/etc/network/if-down.d/shorewall
 	else
 	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-up.d/shorewall 0544
+	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-down.d/shorewall 0544
 	    install_file ifupdown ${DESTDIR}${CONFDIR}/network/if-post-down.d/shorewall 0544
 	fi
 	;;
     suse)
 	if [ -z "$RPM" ]; then
 	    if [ $configure -eq 0 ]; then
-		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-up.d 0755
-		make_parent_directory ${DESTDIR}${SYSCONFDIR}/network/if-down.d 0755
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-up.d/
+		mkdir -p ${DESTDIR}${SYSCONFDIR}/network/if-down.d/
 	    fi
 
 	    install_file ifupdown ${DESTDIR}${SYSCONFDIR}/network/if-up.d/shorewall 0544
@@ -473,17 +518,17 @@ if [ -z "$DESTDIR" ]; then
 	if [ $HOST = debian ]; then
 	    if [ -n "$SERVICEDIR" ]; then
 		if systemctl enable ${PRODUCT}.service; then
-                    echo "$Product will start automatically at boot"
+                    echo "Shorewall Init will start automatically at boot"
 		fi
 	    elif mywhich insserv; then
-		if insserv ${INITDIR}/$PRODUCT; then
-                    echo "$Product will start automatically at boot"
+		if insserv ${INITDIR}/shorewall-init; then
+		    echo "Shorewall Init will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif mywhich update-rc.d ; then
 		if update-rc.d $PRODUCT enable; then
-                    echo "$Product will start automatically at boot"
+		    echo "$PRODUCT will start automatically at boot"
 		    echo "Set startup=1 in ${CONFDIR}/default/$PRODUCT to enable"
 		else
 		    cant_autostart
@@ -504,31 +549,31 @@ if [ -z "$DESTDIR" ]; then
 	    /bin/true
 	else
 	    if [ -n "$SERVICEDIR" ]; then
-		if systemctl enable ${PRODUCT}.service; then
-		    echo "$Product will start automatically at boot"
+		if systemctl enable shorewall-init.service; then
+		    echo "Shorewall Init will start automatically at boot"
 		fi
 	    elif [ -x ${SBINDIR}/insserv -o -x /usr${SBINDIR}/insserv ]; then
-		if insserv ${INITDIR}/$PRODUCT ; then
-		    echo "$Product will start automatically at boot"
+		if insserv ${INITDIR}/shorewall-init ; then
+		    echo "Shorewall Init will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif [ -x ${SBINDIR}/chkconfig -o -x /usr${SBINDIR}/chkconfig ]; then
-		if chkconfig --add $PRODUCT ; then
-		    echo "$Product will start automatically at boot"
-		    chkconfig --list $PRODUCT
+		if chkconfig --add shorewall-init ; then
+		    echo "Shorewall Init will start automatically in run levels as follows:"
+		    chkconfig --list shorewall-init
 		else
 		    cant_autostart
 		fi
 	    elif [ -x ${SBINDIR}/rc-update ]; then
-		if rc-update add $PRODUCT default; then
-		    echo "$Product will start automatically at boot"
+		if rc-update add shorewall-init default; then
+		    echo "Shorewall Init will start automatically at boot"
 		else
 		    cant_autostart
 		fi
 	    elif [ $HOST = openwrt -a -f ${CONFDIR}/rc.common ]; then
 		/etc/init.d/$PRODUCT enable
-		if /etc/init.d/$PRODUCT enabled; then
+		if /etc/init.d/shorewall-init enabled; then
 		    echo "$Product will start automatically at boot"
 		else
 		    cant_autostart
@@ -542,11 +587,11 @@ else
     if [ $configure -eq 1 -a -n "$first_install" ]; then
 	if [ $HOST = debian -a -z "$SERVICEDIR" ]; then
 	    if [ -n "${DESTDIR}" ]; then
-		make_parent_directory ${DESTDIR}/etc/rcS.d 0755
+		mkdir -p ${DESTDIR}/etc/rcS.d
 	    fi
 
-	    ln -sf ../init.d/$PRODUCT ${DESTDIR}${CONFDIR}/rcS.d/S38${PRODUCT}
-	    echo "$Product will start automatically at boot"
+	    ln -sf ../init.d/shorewall-init ${DESTDIR}${CONFDIR}/rcS.d/S38shorewall-init
+	    echo "Shorewall Init will start automatically at boot"
 	fi
     fi
 fi
@@ -557,8 +602,8 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
     case $HOST in
 	debian|suse)
 	    for directory in ip-up.d ip-down.d ipv6-up.d ipv6-down.d; do
-		make_parent_directory ${DESTDIR}/etc/ppp/$directory 0755 #SuSE doesn't create the IPv6 directories
-		cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
+		mkdir -p ${DESTDIR}/etc/ppp/$directory #SuSE doesn't create the IPv6 directories
+		cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown ${DESTDIR}${CONFDIR}/ppp/$directory/shorewall
 	    done
 	    ;;
 	redhat)
@@ -569,19 +614,19 @@ if [ -d ${DESTDIR}/etc/ppp ]; then
 		FILE=${DESTDIR}/etc/ppp/$file
 		if [ -f $FILE ]; then
 		    if grep -qF Shorewall-based $FILE ; then
-			cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
+			cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
 		    else
 			echo "$FILE already exists -- ppp devices will not be handled"
 			break
 		    fi
 		else
-		    cp -fp ${DESTDIR}${LIBEXECDIR}/$PRODUCT/ifupdown $FILE
+		    cp -fp ${DESTDIR}${LIBEXECDIR}/shorewall-init/ifupdown $FILE
 		fi
 	    done
 	    ;;
     esac
 fi
 #
-# Report Success
+#  Report Success
 #
 echo "shorewall Init Version $VERSION Installed"

Shorewall-init/shorewall-init

@@ -1,12 +1,12 @@
 #!/bin/bash
-#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#	The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.0
 #
 #	(c) 2012-2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	On most distributions, this file should be called
 #	/etc/init.d/shorewall.
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #	This program is part of Shorewall.
 #
@@ -25,7 +25,6 @@
 #
 ###############################################################################
 # set the STATEDIR variable
-
 setstatedir() {
     local statedir
     if [ -f ${CONFDIR}/${PRODUCT}/vardir ]; then
@@ -34,76 +33,13 @@ setstatedir() {
 
     [ -n "$statedir" ] && STATEDIR=${statedir} || STATEDIR=${VARLIB}/${PRODUCT}
 
-    if [ -x ${STATEDIR}/firewall ]; then
-        return 0
-    elif [ $PRODUCT = shorewall ]; then
-	${SBINDIR}/shorewall compile
-    elif [ $PRODUCT = shorewall6 ]; then
-	${SBINDIR}/shorewall -6 compile
+    if [ $PRODUCT = shorewall -o $PRODUCT = shorewall6 ]; then
+	${SBINDIR}/$PRODUCT ${OPTIONS} compile -c
+    else
+	return 0
     fi
 }
 
-# Initialize the firewalls
-
-shorewall_init_start () {
-    local PRODUCT
-    local STATEDIR
-
-    printf "Initializing \"Shorewall-based firewalls\": "
-
-    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
-	ipset -R < "$SAVE_IPSETS"
-    fi
-
-    for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
-	    #
-	    # Run in a sub-shell to avoid name collisions
-	    #
-	    (
-		if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		    ${STATEDIR}/firewall ${OPTIONS} stop
-		fi
-	    )
-	fi
-    done
-
-    return 0
-}
-
-# Clear the firewalls
-
-shorewall_init_stop () {
-    local PRODUCT
-    local STATEDIR
-
-    printf "Clearing \"Shorewall-based firewalls\": "
-
-    for PRODUCT in $PRODUCTS; do
-	if setstatedir; then
-	    #
-	    # Run in sub-shell to avoid name collisions
-	    #
-	    (
-		if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
-		    ${STATEDIR}/firewall ${OPTIONS} clear
-		fi
-	    )
-	fi
-    done
-
-    if [ -n "$SAVE_IPSETS" ]; then
-	mkdir -p $(dirname "$SAVE_IPSETS")
-	if ipset -S > "${SAVE_IPSETS}.tmp"; then
-	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS" || rm -f "${SAVE_IPSETS}.tmp"
-	else
-	    rm -f "${SAVE_IPSETS}.tmp"
-	fi
-    fi
-
-    return 0
-}
-
 #
 # This is modified by the installer when ${SHAREDIR} <> /usr/share
 #
@@ -121,12 +57,64 @@ else
     exit 1
 fi
 
+# Initialize the firewall
+shorewall_start () {
+    local PRODUCT
+    local STATEDIR
+
+    echo -n "Initializing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		#
+		# Run in a sub-shell to avoid name collisions
+		#
+		(
+		    if ! ${STATEDIR}/firewall status > /dev/null 2>&1; then
+			${STATEDIR}/firewall ${OPTIONS} stop
+		    fi
+		)
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" -a -f "$SAVE_IPSETS" ]; then
+	ipset -R < "$SAVE_IPSETS"
+    fi
+
+    return 0
+}
+
+# Clear the firewall
+shorewall_stop () {
+    local PRODUCT
+    local STATEDIR
+
+    echo -n "Clearing \"Shorewall-based firewalls\": "
+    for PRODUCT in $PRODUCTS; do
+	if setstatedir; then
+	    if [ -x ${STATEDIR}/firewall ]; then
+		${STATEDIR}/firewall ${OPTIONS} clear
+	    fi
+	fi
+    done
+
+    if [ -n "$SAVE_IPSETS" ]; then
+	mkdir -p $(dirname "$SAVE_IPSETS")
+	if ipset -S > "${SAVE_IPSETS}.tmp"; then
+	    grep -qE -- '^(-N|create )' "${SAVE_IPSETS}.tmp" && mv -f "${SAVE_IPSETS}.tmp" "$SAVE_IPSETS"
+	fi
+    fi
+
+    return 0
+}
+
 case "$1" in
     start)
-	shorewall_init_start
+	shorewall_start
 	;;
     stop)
-	shorewall_init_stop
+	shorewall_stop
 	;;
     *)
 	echo "Usage: $0 {start|stop}"

Shorewall-init/shorewall-init.service

@@ -12,7 +12,7 @@ Wants=network-pre.target
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-init
-StandardOutput=journal
+StandardOutput=syslog
 ExecStart=/sbin/shorewall-init start
 ExecStop=/sbin/shorewall-init stop
 

Shorewall-init/shorewall-init.service.debian

@@ -6,7 +6,6 @@
 #
 [Unit]
 Description=Shorewall firewall (bootup security)
-Documentation=man:shorewall-init(8)
 Before=network.target
 
 [Service]

Shorewall-init/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall Init
+# Script to back uninstall Shoreline Firewall
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,34 +26,62 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx  #The Build script inserts the actual version
 PRODUCT=shorewall-init
 Product="Shorewall Init"
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -n"
+    echo "usage: $ME [ <shorewallrc file> ]"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
-#
-# Parse the run line
-#
 finished=0
 configure=1
 
@@ -90,17 +118,17 @@ while [ $finished -eq 0 ]; do
 	    ;;
     esac
 done
-
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -110,72 +138,72 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file || exit 1
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
+if [ -f ${SHAREDIR}/shorewall-init/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-init/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Init Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Init Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+[ -n "${LIBEXEC:=${SHAREDIR}}" ]
+
+echo "Uninstalling Shorewall Init $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
-[ -n "${LIBEXEC:=${SHAREDIR}}" ]
+INITSCRIPT=${CONFDIR}/init.d/shorewall-init
 
-remove_file  ${SBINDIR}/$PRODUCT
-
-FIREWALL=${CONFDIR}/init.d/$PRODUCT
-
-if [ -f "$FIREWALL" ]; then
+if [ -f "$INITSCRIPT" ]; then
     if [ $configure -eq 1 ]; then
-	if [ $HOST = openwrt ] ; then
-	    if /etc/init.d/$PRODUCT enabled; then
-		/etc/init.d/$PRODUCT disable
+	if [ $HOST = openwrt ]; then
+	    if /etc/init.d/shorewall-init enabled; then
+		/etc/init.d/shorewall-init disable
 	    fi
+	elif mywhich updaterc.d ; then
+	    updaterc.d shorewall-init remove
 	elif mywhich insserv ; then
-            insserv -r $FIREWALL
-	elif mywhich update-rc.d ; then
-	    update-rc.d ${PRODUCT} remove
+            insserv -r $INITSCRIPT
 	elif mywhich chkconfig ; then
-	    chkconfig --del $(basename $FIREWALL)
+	    chkconfig --del $(basename $INITSCRIPT)
 	fi
     fi
 
-    remove_file $FIREWALL
+    remove_file $INITSCRIPT
 fi
 
-[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
+if [ -z "${SERVICEDIR}" ]; then
+    SERVICEDIR="$SYSTEMD"
+fi
 
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
-    remove_file $SERVICEDIR/${PRODUCT}.service
+    [ $configure -eq 1 ] && systemctl disable shorewall-init.service
+    rm -f $SERVICEDIR/shorewall-init.service
 fi
 
 if [ $HOST = openwrt ]; then
-    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
+    [ "$(readlink -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 else
-    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifup-local
-    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/$PRODUCT ] && remove_file ${SBINDIR}/ifdown-local
+    [ "$(readlink -m -q ${SBINDIR}/ifup-local)"   = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifup-local
+    [ "$(readlink -m -q ${SBINDIR}/ifdown-local)" = ${SHAREDIR}/shorewall-init ] && remove_file ${SBINDIR}/ifdown-local
 fi
 
-remove_file ${CONFDIR}/default/$PRODUCT
-remove_file ${CONFDIR}/sysconfig/$PRODUCT
+remove_file ${CONFDIR}/default/shorewall-init
+remove_file ${CONFDIR}/sysconfig/shorewall-init
 
 remove_file ${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall
 
@@ -200,11 +228,10 @@ if [ -d ${CONFDIR}/ppp ]; then
     done
 fi
 
-remove_directory ${SHAREDIR}/$PRODUCT
-remove_directory ${LIBEXECDIR}/$PRODUCT
-remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
+rm -f  ${SBINDIR}/shorewall-init
+rm -rf ${SHAREDIR}/shorewall-init
+rm -rf ${LIBEXECDIR}/shorewall-init
+
+echo "Shorewall Init Uninstalled"
+
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"

Shorewall-lite/Makefile

@@ -0,0 +1,18 @@
+# Shorewall Lite Makefile to restart if firewall script is newer than last restart
+VARDIR=$(shell /sbin/shorewall-lite show vardir)
+SHAREDIR=/usr/share/shorewall-lite
+RESTOREFILE?=.restore
+
+all: $(VARDIR)/$(RESTOREFILE)
+
+$(VARDIR)/$(RESTOREFILE): $(VARDIR)/firewall
+	@/sbin/shorewall-lite -q save >/dev/null; \
+	if \
+	    /sbin/shorewall-lite -q restart >/dev/null 2>&1; \
+	then \
+	    /sbin/shorewall-lite -q save >/dev/null; \
+	else \
+	    /sbin/shorewall-lite -q restart 2>&1 | tail >&2; exit 1; \
+	fi
+
+# EOF

Shorewall-lite/Shorewall-lite-targetname

@@ -1 +0,0 @@
-5.2.4.1

Shorewall-lite/default.debian

@@ -1,5 +1,5 @@
 # prevent startup with default configuration
-# set the following variable to 1 in order to allow Shorewall-lite to start
+# set the following varible to 1 in order to allow Shorewall-lite to start
 
 startup=0
 
@@ -16,7 +16,7 @@ startup=0
 #    wait_interface=
 
 #
-# Global start/restart/reload/stop options
+# Startup options
 #
 OPTIONS=""
 
@@ -30,16 +30,6 @@ STARTOPTIONS=""
 #
 RESTARTOPTIONS=""
 
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
 #
 # Init Log -- if /dev/null, use the STARTUP_LOG defined in shorewall.conf
 #

Shorewall-lite/default.debian.systemd

@@ -1,26 +0,0 @@
-#
-# Global start/restart/reload/stop options
-#
-OPTIONS=""
-
-#
-# Start options
-#
-STARTOPTIONS=""
-
-#
-# Restart options
-#
-RESTARTOPTIONS=""
-
-#
-# Reload options
-#
-RELOADOPTIONS=""
-
-#
-# Stop options
-#
-STOPOPTIONS=""
-
-# EOF

Shorewall-lite/init.alt.sh

@@ -1,117 +0,0 @@
-#!/bin/sh
-#
-# Shorewall-Lite init script
-#
-# chkconfig: - 28 90
-# description: Packet filtering firewall
-#
-### BEGIN INIT INFO
-# Provides: shorewall-lite
-# Required-Start: $local_fs $remote_fs $syslog $network
-# Should-Start: $time $named
-# Required-Stop:
-# Default-Start: 3 4 5
-# Default-Stop:  0 1 2 6
-# Short-Description: Packet filtering firewall
-# Description: The Shoreline Firewall, more commonly known as "Shorewall", is a
-#              Netfilter (iptables) based firewall
-### END INIT INFO
-
-# Do not load RH compatibility interface.
-WITHOUT_RC_COMPAT=1
-
-# Source function library.
-. /etc/init.d/functions
-
-#
-# The installer may alter this
-#
-. /usr/share/shorewall/shorewallrc
-
-NAME="Shorewall-Lite firewall"
-PROG="shorewall"
-SHOREWALL="$SBINDIR/$PROG -l"
-LOGGER="logger -i -t $PROG"
-
-# Get startup options (override default)
-OPTIONS=
-
-SourceIfNotEmpty $SYSCONFDIR/${PROG}-lite
-
-LOCKFILE="/var/lock/subsys/${PROG}-lite"
-RETVAL=0
-
-start() {
-	action $"Applying $NAME rules:" "$SHOREWALL" "$OPTIONS" start "$STARTOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch "$LOCKFILE"
-	return $RETVAL
-}
-
-stop() {
-	action $"Stoping $NAME :" "$SHOREWALL" "$OPTIONS" stop "$STOPOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f "$LOCKFILE"
-	return $RETVAL
-}
-
-restart() {
-	action $"Restarting $NAME rules: " "$SHOREWALL" "$OPTIONS" restart "$RESTARTOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	return $RETVAL
-}
-
-reload() {
-	action $"Reloadinging $NAME rules: " "$SHOREWALL" "$OPTIONS" reload "$RELOADOPTIONS" 2>&1 | "$LOGGER"
-	RETVAL=$?
-	return $RETVAL
-}
-
-clear() {
-	action $"Clearing $NAME rules: " "$SHOREWALL" "$OPTIONS" clear 2>&1 | "$LOGGER"
-	RETVAL=$?
-	return $RETVAL
-}
-
-# See how we were called.
-case "$1" in
-	start)
-	    start
-	    ;;
-	stop)
-	    stop
-	    ;;
-	restart)
-	    restart
-	    ;;
-	reload)
-	    reload
-	    ;;
-	clear)
-	    clear
-	    ;;
-	condrestart)
-	    if [ -e "$LOCKFILE" ]; then
-		restart
-	    fi
-	    ;;
-	condreload)
-	    if [ -e "$LOCKFILE" ]; then
-		restart
-	    fi
-	    ;;
-	condstop)
-	    if [ -e "$LOCKFILE" ]; then
-		stop
-	    fi
-	    ;;
-	status)
-	    "$SHOREWALL" status
-	     RETVAL=$?
-	    ;;
-	*)
-	    echo $"Usage: ${0##*/}  {start|stop|restart|reload|clear|condrestart|condstop|status}"
-	    RETVAL=1
-esac
-
-exit $RETVAL

Shorewall-lite/init.debian.sh

@@ -13,8 +13,8 @@
 
 . /lib/lsb/init-functions
 
-SRWL=/sbin/shorewall
-SRWL_OPTS="-ltvv"
+SRWL=/sbin/shorewall-lite
+SRWL_OPTS="-tvv"
 test -n ${INITLOG:=/var/log/shorewall-lite-init.log}
 
 [ "$INITLOG" = "/dev/null" ] && SHOREWALL_INIT_SCRIPT=1 || SHOREWALL_INIT_SCRIPT=0
@@ -85,7 +85,7 @@ fi
 
 # start the firewall
 shorewall_start () {
-  printf "Starting \"Shorewall firewall\": "
+  echo -n "Starting \"Shorewall firewall\": "
   $SRWL $SRWL_OPTS start $STARTOPTIONS >> $INITLOG 2>&1 && echo "done." || echo_notdone
   return 0
 }
@@ -93,10 +93,10 @@ shorewall_start () {
 # stop the firewall
 shorewall_stop () {
   if [ "$SAFESTOP" = 1 ]; then
-      printf "Stopping \"Shorewall Lite firewall\": "
+      echo -n "Stopping \"Shorewall Lite firewall\": "
       $SRWL $SRWL_OPTS stop >> $INITLOG 2>&1 && echo "done." || echo_notdone
   else
-      printf "Clearing all \"Shorewall Lite firewall\" rules: "
+      echo -n "Clearing all \"Shorewall Lite firewall\" rules: "
       $SRWL $SRWL_OPTS clear >> $INITLOG 2>&1 && echo "done." || echo_notdone
   fi
   return 0
@@ -104,14 +104,14 @@ shorewall_stop () {
 
 # restart the firewall
 shorewall_restart () {
-  printf "Restarting \"Shorewall firewall\": "
+  echo -n "Restarting \"Shorewall firewall\": "
   $SRWL $SRWL_OPTS restart $RESTARTOPTIONS >> $INITLOG 2>&1 && echo "done." || echo_notdone
   return 0
 }
 
 # refresh the firewall
 shorewall_refresh () {
-  printf "Refreshing \"Shorewall firewall\": "
+  echo -n "Refreshing \"Shorewall firewall\": "
   $SRWL $SRWL_OPTS refresh >> $INITLOG 2>&1 && echo "done." || echo_notdone
   return 0
 }

Shorewall-lite/init.fedora.sh

@@ -25,7 +25,7 @@
 #
 . /usr/share/shorewall/shorewallrc
 
-prog="shorewall -l"
+prog="shorewall-lite"
 shorewall="${SBINDIR}/$prog"
 logger="logger -i -t $prog"
 lockfile="/var/lock/subsys/$prog"
@@ -38,7 +38,7 @@ if [ -f ${SYSCONFDIR}/$prog ]; then
 fi
 
 start() {
-    printf $"Starting Shorewall: "
+    echo -n $"Starting Shorewall: "
     $shorewall $OPTIONS start $STARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
@@ -52,7 +52,7 @@ start() {
 }
 
 stop() {
-    printf $"Stopping Shorewall: "
+    echo -n $"Stopping Shorewall: "
     $shorewall $OPTIONS stop 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then
@@ -68,7 +68,7 @@ stop() {
 restart() {
 # Note that we don't simply stop and start since shorewall has a built in
 # restart which stops the firewall if running and then starts it.
-    printf $"Restarting Shorewall: "
+    echo -n $"Restarting Shorewall: "
     $shorewall $OPTIONS restart $RESTARTOPTIONS 2>&1 | $logger
     retval=${PIPESTATUS[0]}
     if [[ $retval == 0 ]]; then

Shorewall-lite/init.openwrt.sh

@@ -1,13 +1,13 @@
 #!/bin/sh /etc/rc.common
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #     (c) 2015 - Matt Darfeuille - (matdarf@gmail.com)
 #
 #	On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -69,7 +69,7 @@ SHOREWALL_INIT_SCRIPT=1
 command="$action"
 
 start() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STARTOPTIONS
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STARTOPTIONS
 }
 
 boot() {
@@ -78,17 +78,17 @@ boot() {
 }
 
 restart() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RESTARTOPTIONS
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RESTARTOPTIONS
 }
 
 reload() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $RELOADOPTION
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $RELOADOPTION
 }
 
 stop() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $STOPOPTIONS
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $STOPOPTIONS
 }
 
 status() {
-	exec ${SBINDIR}/shorewall -l $OPTIONS $command $@
+	exec ${SBINDIR}/shorewall-lite $OPTIONS $command $@
 }

Shorewall-lite/init.sh

@@ -1,13 +1,13 @@
 #!/bin/sh
 RCDLINKS="2,S41 3,S41 6,K41"
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2012,2014 - Tom Eastep (teastep@shorewall.net)
 #
 #	On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #

Shorewall-lite/init.suse.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V5.2
+#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -8,7 +8,7 @@
 #
 #	On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #	This program is free software; you can redistribute it and/or modify
 #	it under the terms of Version 2 of the GNU General Public License

Shorewall-lite/install.sh

@@ -4,7 +4,7 @@
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
-#       Shorewall documentation is available at https://shorewall.org
+#       Shorewall documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #
@@ -22,19 +22,62 @@
 #	along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx #The Build script inserts the actual version
 
 usage() # $1 = exit status
 {
     ME=$(basename $0)
-    echo "usage: $ME [ <option> ] [ <shorewallrc file> ]"
-    echo "where <option> is one of"
-    echo "  -h"
-    echo "  -v"
-    echo "  -n"
+    echo "usage: $ME [ <configuration-file> ]"
+    echo "       $ME -v"
+    echo "       $ME -h"
+    echo "       $ME -n"
     exit $1
 }
 
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
+
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    echo $dir/$1
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+cant_autostart()
+{
+    echo
+    echo  "WARNING: Unable to configure $Product to start automatically at boot" >&2
+}
+
+delete_file() # $1 = file to delete
+{
+    rm -f $1
+}
+
 install_file() # $1 = source $2 = target $3 = mode
 {
     if cp -f $1 $2; then
@@ -53,12 +96,25 @@ install_file() # $1 = source $2 = target $3 = mode
     exit 1
 }
 
+make_directory() # $1 = directory , $2 = mode
+{
+    mkdir -p $1
+    chmod 755 $1
+    [ -n "$OWNERSHIP" ] && chown $OWNERSHIP $1
+
+}
+
+require()
+{
+    eval [ -n "\$$1" ] || fatal_error "Required option $1 not set"
+}
+
 #
 # Change to the directory containing this script
 #
 cd "$(dirname $0)"
 
-if [ -f shorewall-lite.service ]; then
+if [ -f shorewall-lite ]; then
     PRODUCT=shorewall-lite
     Product="Shorewall Lite"
 else
@@ -66,11 +122,6 @@ else
     Product="Shorewall6 Lite"
 fi
 
-#
-# Source common functions
-#
-. ./lib.installer || { echo "ERROR: Can not load common functions." >&2; exit 1; }
-
 #
 # Parse the run line
 #
@@ -117,14 +168,12 @@ done
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
+	. ./shorewallrc || exit 1
 	file=./shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
     elif [ -f ~/.shorewallrc ]; then
-	file=~/.shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. ~/.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-	file=/usr/share/shorewall/shorewallrc
-        . $file || fatal_error "Can not load the RC file: $file"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -134,11 +183,11 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
@@ -190,9 +239,6 @@ if [ -z "$BUILD" ]; then
 		    opensuse)
 			BUILD=suse
 			;;
-		    alt|basealt|altlinux)
-			BUILD=alt
-			;;
 		    *)
 			BUILD="$ID"
 			;;
@@ -201,8 +247,6 @@ if [ -z "$BUILD" ]; then
 		BUILD=debian
 	    elif [ -f /etc/gentoo-release ]; then
 		BUILD=gentoo
-	    elif [ -f /etc/altlinux-release ]; then
-		BUILD=alt
 	    elif [ -f ${CONFDIR}/redhat-release ]; then
 		BUILD=redhat
 	    elif [ -f ${CONFDIR}/SuSE-release ]; then
@@ -271,13 +315,11 @@ case "$HOST" in
     openwrt)
 	echo "Installing OpenWRT-specific configuration..."
 	;;
-    alt)
-	echo "Installing ALT-specific configuration...";
-	;;
     linux)
 	;;
     *)
-	fatal_error "ERROR: Unknown HOST \"$HOST\""
+	echo "ERROR: Unknown HOST \"$HOST\"" >&2
+	exit 1;
 	;;
 esac
 
@@ -289,7 +331,8 @@ if [ -n "$DESTDIR" ]; then
 	OWNERSHIP=""
     fi
 
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    make_directory ${DESTDIR}${SBINDIR} 755
+    make_directory ${DESTDIR}${INITDIR} 755
 
 else
     if [ ! -f ${SHAREDIR}/shorewall/coreversion ]; then
@@ -319,9 +362,9 @@ else
 fi
 
 #
-# Check for ${SHAREDIR}/$PRODUCT/version
+# Check for ${SBINDIR}/$PRODUCT
 #
-if [ -f ${DESTDIR}${SHAREDIR}/$PRODUCT/version ]; then
+if [ -f ${DESTDIR}${SBINDIR}/$PRODUCT ]; then
     first_install=""
 else
     first_install="Yes"
@@ -329,20 +372,27 @@ fi
 
 delete_file ${DESTDIR}/usr/share/$PRODUCT/xmodules
 
-[ -n "${INITFILE}" ] && make_parent_directory ${DESTDIR}${INITDIR} 0755
+install_file $PRODUCT ${DESTDIR}${SBINDIR}/$PRODUCT 0544
+[ -n "${INITFILE}" ] && make_directory ${DESTDIR}${INITDIR} 755
+
+echo "$Product control program installed in ${DESTDIR}${SBINDIR}/$PRODUCT"
 
 #
 # Create ${CONFDIR}/$PRODUCT, /usr/share/$PRODUCT and /var/lib/$PRODUCT if needed
 #
-make_parent_directory ${DESTDIR}${CONFDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${SHAREDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${LIBEXECDIR}/$PRODUCT 0755
-make_parent_directory ${DESTDIR}${SBINDIR} 0755
-make_parent_directory ${DESTDIR}${VARDIR} 0755
+mkdir -p ${DESTDIR}${CONFDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${SHAREDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${LIBEXECDIR}/$PRODUCT
+mkdir -p ${DESTDIR}${VARDIR}
+
+chmod 755 ${DESTDIR}${CONFDIR}/$PRODUCT
+chmod 755 ${DESTDIR}${SHAREDIR}/$PRODUCT
 
 if [ -n "$DESTDIR" ]; then
-    make_parent_directory ${DESTDIR}${CONFDIR}/logrotate.d 0755
-    make_parent_directory ${DESTDIR}${INITDIR} 0755
+    mkdir -p ${DESTDIR}${CONFDIR}/logrotate.d
+    chmod 755 ${DESTDIR}${CONFDIR}/logrotate.d
+    mkdir -p ${DESTDIR}${INITDIR}
+    chmod 755 ${DESTDIR}${INITDIR}
 fi
 
 if [ -n "$INITFILE" ]; then
@@ -363,9 +413,9 @@ if [ -z "${SERVICEDIR}" ]; then
 fi
 
 if [ -n "$SERVICEDIR" ]; then
-    make_parent_directory ${DESTDIR}${SERVICEDIR} 0755
+    mkdir -p ${DESTDIR}${SERVICEDIR}
     [ -z "$SERVICEFILE" ] && SERVICEFILE=$PRODUCT.service
-    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 0644
+    install_file $SERVICEFILE ${DESTDIR}${SERVICEDIR}/$PRODUCT.service 644
     [ ${SBINDIR} != /sbin ] && eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\' ${DESTDIR}${SERVICEDIR}/$PRODUCT.service
     echo "Service file $SERVICEFILE installed as ${DESTDIR}${SERVICEDIR}/$PRODUCT.service"
 fi
@@ -383,6 +433,15 @@ elif [ $HOST = gentoo ]; then
     # Adjust SUBSYSLOCK path (see https://bugs.gentoo.org/show_bug.cgi?id=459316)
     perl -p -w -i -e "s|^SUBSYSLOCK=.*|SUBSYSLOCK=/run/lock/$PRODUCT|;" ${DESTDIR}${CONFDIR}/$PRODUCT/$PRODUCT.conf
 fi
+
+#
+# Install the  Makefile
+#
+install_file Makefile ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile 0600
+[ $SHAREDIR = /usr/share ] || eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
+[ $SBINDIR = /sbin ]       || eval sed -i \'s\|/sbin/\|${SBINDIR}/\|\'       ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile
+echo "Makefile installed as ${DESTDIR}${CONFDIR}/$PRODUCT/Makefile"
+
 #
 # Install the default config path file
 #
@@ -394,14 +453,8 @@ echo "Default config path file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/confi
 #
 for f in lib.* ; do
     if [ -f $f ]; then
-        case $f in
-            *installer)
-                ;;
-            *)
-                install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-                echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
-                ;;
-        esac
+	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
+	echo "Library ${f#*.} file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
     fi
 done
 
@@ -426,18 +479,18 @@ echo "Capability file builder installed in ${DESTDIR}${LIBEXECDIR}/$PRODUCT/shor
 if [ -f modules ]; then
     install_file modules ${DESTDIR}${SHAREDIR}/$PRODUCT/modules 0600
     echo "Modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/modules"
-
-    for f in modules.*; do
-	install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 0644
-	echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
-    done
 fi
 
 if [ -f helpers ]; then
-    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 0600
+    install_file helpers ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers 600
     echo "Helper modules file installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/helpers"
 fi
 
+for f in modules.*; do
+    install_file $f ${DESTDIR}${SHAREDIR}/$PRODUCT/$f 644
+    echo "Module file $f installed as ${DESTDIR}${SHAREDIR}/$PRODUCT/$f"
+done
+
 #
 # Install the Man Pages
 #
@@ -445,19 +498,17 @@ fi
 if [ -d manpages -a -n "$MANDIR" ]; then
     cd manpages
 
-    make_parent_directory ${DESTDIR}${MANDIR}/man5 0755
+    mkdir -p ${DESTDIR}${MANDIR}/man5/ ${DESTDIR}${MANDIR}/man8/
 
     for f in *.5; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 0644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man5/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man5/$f.gz"
     done
 
-    make_parent_directory ${DESTDIR}${MANDIR}/man8 0755
-
     for f in *.8; do
 	gzip -c $f > $f.gz
-	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 0644
+	install_file $f.gz ${DESTDIR}${MANDIR}/man8/$f.gz 644
 	echo "Man page $f.gz installed to ${DESTDIR}${MANDIR}/man8/$f.gz"
     done
 
@@ -467,7 +518,7 @@ if [ -d manpages -a -n "$MANDIR" ]; then
 fi
 
 if [ -d ${DESTDIR}${CONFDIR}/logrotate.d ]; then
-    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 0644
+    install_file logrotate ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT 644
     echo "Logrotate file installed as ${DESTDIR}${CONFDIR}/logrotate.d/$PRODUCT"
 fi
 
@@ -475,7 +526,7 @@ fi
 # Create the version file
 #
 echo "$VERSION" > ${DESTDIR}${SHAREDIR}/$PRODUCT/version
-chmod 0644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
+chmod 644 ${DESTDIR}${SHAREDIR}/$PRODUCT/version
 #
 # Remove and create the symbolic link to the init script
 #
@@ -489,16 +540,14 @@ delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.common
 delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/lib.cli
 delete_file ${DESTDIR}${SHAREDIR}/$PRODUCT/wait4ifup
 
-#
-#  Creatae the symbolic link for the CLI
-#
-ln -sf shorewall ${DESTDIR}${SBINDIR}/${PRODUCT}
-
 #
 # Note -- not all packages will have the SYSCONFFILE so we need to check for its existance here
 #
 if [ -n "$SYSCONFFILE" -a -f "$SYSCONFFILE" -a ! -f ${DESTDIR}${SYSCONFDIR}/${PRODUCT} ]; then
-    [ ${DESTDIR} ] && make_parent_directory ${DESTDIR}${SYSCONFDIR} 0755
+    if [ ${DESTDIR} ]; then
+	mkdir -p ${DESTDIR}${SYSCONFDIR}
+	chmod 755 ${DESTDIR}${SYSCONFDIR}
+    fi
 
     install_file ${SYSCONFFILE} ${DESTDIR}${SYSCONFDIR}/${PRODUCT} 0640
     echo "$SYSCONFFILE file installed in ${DESTDIR}${SYSCONFDIR}/${PRODUCT}"
@@ -506,6 +555,7 @@ fi
 
 if [ ${SHAREDIR} != /usr/share ]; then
     eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SHAREDIR}/${PRODUCT}/lib.base
+    eval sed -i \'s\|/usr/share/\|${SHAREDIR}/\|\' ${DESTDIR}${SBINDIR}/$PRODUCT
 fi
 
 if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${mac}" ]; then
@@ -566,6 +616,6 @@ if [ $configure -eq 1 -a -z "$DESTDIR" -a -n "$first_install" -a -z "${cygwin}${
 fi
 
 #
-# Report Success
+#  Report Success
 #
 echo "$Product Version $VERSION Installed"

Shorewall-lite/lib.base

@@ -1,9 +1,9 @@
 #
-# Shorewall 5.2 -- /usr/share/shorewall-lite/lib.base
+# Shorewall 4.4 -- /usr/share/shorewall-lite/lib.base
 #
 #     (c) 2011,2014 - Tom Eastep (teastep@shorewall.net)
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #       This program is part of Shorewall.
 #

Shorewall-lite/manpages/shorewall-lite.conf.xml

@@ -183,7 +183,7 @@
     <title>See ALSO</title>
 
     <para><ulink
-    url="https://shorewall.org/Documentation_Index.html">https://shorewall.org/Documentation_Index.html</ulink></para>
+    url="http://www.shorewall.net/Documentation_Index.html">http://www.shorewall.net/Documentation_Index.html</ulink></para>
 
     <para>shorewall-lite(8), shorewall-accounting(5), shorewall-actions(5),
     shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5),

Shorewall-lite/shorecap

@@ -28,7 +28,7 @@
 #
 #   On the target system (the system where the firewall program is to run):
 #
-#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] shorecap > capabilities
+#       [ IPTABLES=<iptables binary> ] [ MODULESDIR=<kernel modules directory> ] [ MODULE_SUFFIX="<module suffix list>" ] shorecap > capabilities
 #
 #    Now move the capabilities file to the compilation system. The file must
 #    be placed in a directory on the CONFIG_PATH to be used when compiling firewalls
@@ -38,26 +38,26 @@
 #
 #        IPTABLES - iptables
 #        MODULESDIR - /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
+#        MODULE_SUFFIX - "o gz xz ko o.gz o.xz ko.gz ko.xz"
 #
 #    Shorewall need not be installed on the target system to run shorecap. If the '-e' flag is
 #    used during firewall compilation, then the generated firewall program will likewise not
 #    require Shorewall to be installed.
 
 
-PRODUCT=shorewall-lite
+g_program=shorewall-lite
 
 #
 # This is modified by the installer when ${SHAREDIR} != /usr/share
 #
 . /usr/share/shorewall/shorewallrc
 
-g_basedir=${SHAREDIR}/shorewall
+g_sharedir="$SHAREDIR"/shorewall-lite
+g_confdir="$CONFDIR"/shorewall-lite
+g_readrc=1
 
 . ${SHAREDIR}/shorewall/lib.cli
-
-setup_product_environment
-
-. ${SHAREDIR}/shorewall-lite/configpath
+. /usr/share/shorewall-lite/configpath
 
 [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
 

Shorewall-lite/shorewall-lite

@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+#     Shorewall Lite Packet Filtering Firewall Control Program - V4.5
+#
+#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2014 -
+#         Tom Eastep (teastep@shorewall.net)
+#
+#	Shorewall documentation is available at http://www.shorewall.net
+#
+#       This program is part of Shorewall.
+#
+#	This program is free software; you can redistribute it and/or modify
+#	it under the terms of the GNU General Public License as published by the
+#       Free Software Foundation, either version 2 of the license or, at your
+#       option, any later version.
+#
+#	This program is distributed in the hope that it will be useful,
+#	but WITHOUT ANY WARRANTY; without even the implied warranty of
+#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#	GNU General Public License for more details.
+#
+#	You should have received a copy of the GNU General Public License
+#	along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#       For a list of supported commands, type 'shorewall help' or 'shorewall6 help'
+#
+################################################################################################
+PRODUCT=shorewall-lite
+
+#
+# This is modified by the installer when ${SHAREDIR} != /usr/share
+#
+. /usr/share/shorewall/shorewallrc
+
+g_program=$PRODUCT
+g_sharedir="$SHAREDIR"/shorewall-lite
+g_confdir="$CONFDIR"/shorewall-lite
+g_readrc=1
+
+. ${SHAREDIR}/shorewall/lib.cli
+
+shorewall_cli $@

Shorewall-lite/shorewall-lite.conf

@@ -8,7 +8,7 @@
 #  "man shorewall-lite.conf"
 #
 #  Manpage also online at
-#  https://shorewall.org/manpages/shorewall-lite.conf.html
+#  http://www.shorewall.net/manpages/shorewall-lite.conf.html
 ###############################################################################
 #                                   N 0 T E
 ###############################################################################

Shorewall-lite/shorewall-lite.service

@@ -13,7 +13,7 @@ Conflicts=iptables.service firewalld.service
 Type=oneshot
 RemainAfterExit=yes
 EnvironmentFile=-/etc/sysconfig/shorewall-lite
-StandardOutput=journal
+StandardOutput=syslog
 ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
 ExecStop=/sbin/shorewall-lite $OPTIONS stop
 

Shorewall-lite/shorewall-lite.service.debian

@@ -6,7 +6,6 @@
 #
 [Unit]
 Description=Shorewall IPv4 firewall (lite)
-Documentation=man:shorewall-lite(8)
 Wants=network-online.target
 After=network-online.target
 Conflicts=iptables.service firewalld.service
@@ -17,7 +16,7 @@ RemainAfterExit=yes
 EnvironmentFile=-/etc/default/shorewall-lite
 StandardOutput=syslog
 ExecStart=/sbin/shorewall-lite $OPTIONS start $STARTOPTIONS
-ExecStop=/usr/share/shorewall/stop_service shorewall-lite
+ExecStop=/sbin/shorewall-lite $OPTIONS clear
 ExecReload=/sbin/shorewall-lite $OPTIONS reload $RELOADOPTIONS
 
 [Install]

Shorewall-lite/uninstall.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Script to back uninstall Shoreline Firewall Lite
+# Script to back uninstall Shoreline Firewall
 #
 #     (c) 2000-2016 - Tom Eastep (teastep@shorewall.net)
 #
@@ -26,7 +26,9 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=xxx # The Build script inserts the actual version
+VERSION=xxx  #The Build script inserts the actual version
+PRODUCT=shorewall-lite
+Product="Shorewall Lite"
 
 usage() # $1 = exit status
 {
@@ -39,27 +41,46 @@ usage() # $1 = exit status
     exit $1
 }
 
-#
-# Change to the directory containing this script
-#
-cd "$(dirname $0)"
+fatal_error()
+{
+    echo "   ERROR: $@" >&2
+    exit 1
+}
 
-if [ -f shorewall-lite.service ]; then
-    PRODUCT=shorewall-lite
-    Product="Shorewall Lite"
-else
-    PRODUCT=shorewall6-lite
-    Product="Shorewall6 Lite"
-fi
+qt()
+{
+    "$@" >/dev/null 2>&1
+}
 
-#
-# Source common functions
-#
-. ./lib.uninstaller || { echo "ERROR: Can not load common functions." >&2; exit 1; }
+split() {
+    local ifs
+    ifs=$IFS
+    IFS=:
+    set -- $1
+    echo $*
+    IFS=$ifs
+}
+
+mywhich() {
+    local dir
+
+    for dir in $(split $PATH); do
+	if [ -x $dir/$1 ]; then
+	    return 0
+	fi
+    done
+
+    return 2
+}
+
+remove_file() # $1 = file to restore
+{
+    if [ -f $1 -o -L $1 ] ; then
+	rm -f $1
+	echo "$1 Removed"
+    fi
+}
 
-#
-# Parse the run line
-#
 finished=0
 configure=1
 
@@ -76,7 +97,7 @@ while [ $finished -eq 0 ]; do
 			usage 0
 			;;
 		    v)
-			echo "$Product Firewall Uninstaller Version $VERSION"
+			echo "$Product Firewall Installer Version $VERSION"
 			exit 0
 			;;
 		    n*)
@@ -96,17 +117,17 @@ while [ $finished -eq 0 ]; do
 	    ;;
     esac
 done
-
 #
 # Read the RC file
 #
 if [ $# -eq 0 ]; then
     if [ -f ./shorewallrc ]; then
-        . ./shorewallrc || fatal_error "Can not load the RC file: ./shorewallrc"
+	. ./shorewallrc
     elif [ -f ~/.shorewallrc ]; then
-        . ~/.shorewallrc || fatal_error "Can not load the RC file: ~/.shorewallrc"
+	. ~/.shorewallrc || exit 1
+	file=./.shorewallrc
     elif [ -f /usr/share/shorewall/shorewallrc ]; then
-        . /usr/share/shorewall/shorewallrc || fatal_error "Can not load the RC file: /usr/share/shorewall/shorewallrc"
+	. /usr/share/shorewall/shorewallrc
     else
 	fatal_error "No configuration file specified and /usr/share/shorewall/shorewallrc not found"
     fi
@@ -116,50 +137,46 @@ elif [ $# -eq 1 ]; then
 	/*|.*)
 	    ;;
 	*)
-	    file=./$file || exit 1
+	    file=./$file
 	    ;;
     esac
 
-    . $file || fatal_error "Can not load the RC file: $file"
+    . $file
 else
     usage 1
 fi
 
-if [ -f ${SHAREDIR}/$PRODUCT/version ]; then
-    INSTALLED_VERSION="$(cat ${SHAREDIR}/$PRODUCT/version)"
+if [ -f ${SHAREDIR}/shorewall-lite/version ]; then
+    INSTALLED_VERSION="$(cat ${SHAREDIR}/shorewall-lite/version)"
     if [ "$INSTALLED_VERSION" != "$VERSION" ]; then
-	echo "WARNING: $Product Version $INSTALLED_VERSION is installed"
+	echo "WARNING: Shorewall Lite Version $INSTALLED_VERSION is installed"
 	echo "         and this is the $VERSION uninstaller."
 	VERSION="$INSTALLED_VERSION"
     fi
 else
-    echo "WARNING: $Product Version $VERSION is not installed"
+    echo "WARNING: Shorewall Lite Version $VERSION is not installed"
     VERSION=""
 fi
 
-echo "Uninstalling $Product $VERSION"
+echo "Uninstalling Shorewall Lite $VERSION"
 
 [ -n "$SANDBOX" ] && configure=0
 
 if [ $configure -eq 1 ]; then
     if qt iptables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall ]; then
-	${SBINDIR}/$PRODUCT clear
-    elif qt ip6tables -L shorewall -n && [ ! -f ${SBINDIR}/shorewall6 ]; then
-	${SBINDIR}/$PRODUCT clear
+	shorewall-lite clear
     fi
 fi
 
-remove_file ${SBINDIR}/$PRODUCT
-
-if [ -h ${SHAREDIR}/$PRODUCT/init ]; then
+if [ -L ${SHAREDIR}/shorewall-lite/init ]; then
     if [ $HOST = openwrt ]; then
-	if [ $configure -eq 1 ] && /etc/init.d/$PRODUCT enabled; then
-	    /etc/init.d/$PRODUCT disable
+	if [ $configure -eq 1 ] && /etc/init.d/shorewall-lite enabled; then
+	    /etc/init.d/shorewall-lite disable
 	fi
 	
-	FIREWALL=$(readlink ${SHAREDIR}/$PRODUCT/init)
+	FIREWALL=$(readlink ${SHAREDIR}/shorewall-lite/init)
     else
-	FIREWALL=$(readlink -m -q ${SHAREDIR}/$PRODUCT/init)
+	FIREWALL=$(readlink -m -q ${SHAREDIR}/shorewall-lite/init)
     fi
 elif [ -n "$INITFILE" ]; then
     FIREWALL=${INITDIR}/${INITFILE}
@@ -167,10 +184,10 @@ fi
 
 if [ -f "$FIREWALL" ]; then
     if [ $configure -eq 1 ]; then
-	if mywhich insserv ; then
+	if mywhich updaterc.d ; then
+	    updaterc.d shorewall-lite remove
+	elif mywhich insserv ; then
             insserv -r $FIREWALL
-	elif mywhich update-rc.d ; then
-	    update-rc.d ${PRODUCT} remove
 	elif mywhich chkconfig ; then
 	    chkconfig --del $(basename $FIREWALL)
 	fi
@@ -179,29 +196,26 @@ if [ -f "$FIREWALL" ]; then
     remove_file $FIREWALL
 fi
 
-[ -z "${SERVICEDIR}" ] && SERVICEDIR="$SYSTEMD"
+[ -z "$SERVICEDIR" ] && SERVICEDIR="$SYSTEMD"
 
 if [ -n "$SERVICEDIR" ]; then
-    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}.service
-    remove_file $SERVICEDIR/${PRODUCT}.service
+    [ $configure -eq 1 ] && systemctl disable ${PRODUCT}
+    rm -f $SERVICEDIR/shorewall-lite.service
 fi
 
-remove_directory ${CONFDIR}/$PRODUCT
-remove_directory ${VARDIR}
-remove_directory ${SHAREDIR}/$PRODUCT
-remove_directory ${LIBEXECDIR}/$PRODUCT
-remove_file  ${CONFDIR}/logrotate.d/$PRODUCT
+rm -f ${SBINDIR}/shorewall-lite
 
-if [ -n "$SYSCONFDIR" ]; then
-    [ -n "$SYSCONFFILE" ] && remove_file ${SYSCONFDIR}/${PRODUCT}
-fi
+rm -rf ${CONFDIR}/shorewall-lite
+rm -rf ${VARDIR}
+rm -rf ${SHAREDIR}/shorewall-lite
+rm -rf ${LIBEXECDIR}/shorewall-lite
+rm -f  ${CONFDIR}/logrotate.d/shorewall-lite
+rm -f  ${SYSCONFDIR}/shorewall-lite
 
 if [ -n "${MANDIR}" ]; then
-    remove_file_with_wildcard ${MANDIR}/man5/${PRODUCT}\*
-    remove_file_with_wildcard ${MANDIR}/man8/${PRODUCT}\*
+    rm -f ${MANDIR}/man5/shorewall-lite*
+    rm -f ${MANDIR}/man8/shorewall-lite*
 fi
 
-#
-# Report Success
-#
-echo "$Product $VERSION Uninstalled"
+echo "Shorewall Lite Uninstalled"
+

Shorewall/Actions/action.AllowICMPs

@@ -1,45 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.AllowICMPs
-#
-# This action ACCEPTs needed ICMP types.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-DEFAULTS ACCEPT
-
-?if __IPV4
-    @1	-	-	icmp	fragmentation-needed	{comment="Needed ICMP types"}
-    @1	-	-	icmp	time-exceeded		{comment="Needed ICMP types"}
-?else
-?COMMENT Needed ICMP types (RFC4890)
-    @1	-		-	ipv6-icmp	destination-unreachable
-    @1	-		-	ipv6-icmp	packet-too-big
-    @1	-		-	ipv6-icmp	time-exceeded
-    @1	-		-	ipv6-icmp	parameter-problem
-
-# The following should have a ttl of 255 and must be allowed to transit a bridge
-    @1	-		-	ipv6-icmp	router-solicitation
-    @1	-		-	ipv6-icmp	neighbour-solicitation
-    @1	-		-	ipv6-icmp	neighbour-advertisement
-    @1	-		-	ipv6-icmp	141	# Inverse neighbour discovery solicitation
-    @1	-		-	ipv6-icmp	142	# Inverse neighbour discovery advertisement
-
-# The following must have a link local source address and must be allowed to transit a bridge
-    @1	fe80::/10	-	ipv6-icmp	130	# Listener query
-    @1	fe80::/10	-	ipv6-icmp	131	# Listener report
-    @1	fe80::/10	-	ipv6-icmp	132	# Listener done
-    @1	fe80::/10	-	ipv6-icmp	router-advertisement
-    @1	::		-	ipv6-icmp	143	# Listener report v2
-    @1	fe80::/10	-	ipv6-icmp	143	# Listener report v2
-
-# The following should be received with a ttl of 255 and must be allowed to transit a bridge
-    @1	::		-	ipv6-icmp	148	# Certificate path solicitation
-    @1	fe80::/10	-	ipv6-icmp	148	# Certificate path solicitation
-    @1	fe80::/10	-	ipv6-icmp	149	# Certificate path advertisement
-
-# The following should have a link local source address and a ttl of 1 and must be allowed to transit a bridge
-    @1	fe80::/10	-	ipv6-icmp	151	# Multicast router advertisement
-    @1	fe80::/10	-	ipv6-icmp	152	# Multicast router solicitation
-    @1	fe80::/10	-	ipv6-icmp	153	# Multicast router termination
-?endif

Shorewall/Actions/action.BLACKLIST

@@ -1,50 +0,0 @@
-#
-# Shorewall - /usr/share/shorewall/action.BLACKLIST
-#
-# This action:
-#
-#   - Adds the sender to the dynamic blacklist ipset
-#   - Optionally acts on the packet (default is DROP)
-#
-# Parameters:
-#
-# 1 - Action to take after adding the packet. Default is DROP.
-#     Pass -- if you don't want to take any action.
-# 2 - Timeout for ipset entry. Default is the timeout specified in
-#     DYNAMIC_BLACKLIST or the one specified when the ipset was created.
-#
-###############################################################################
-# Note -- This action is defined with the 'section' option, so the first
-#         parameter is always the section name. That means that in the
-#         following text, the first parameter passed in the rule is actually
-#         @2.
-###############################################################################
-?if $1 eq 'BLACKLIST'
-   ?if $BLACKLIST_LOG_LEVEL
-       blacklog
-   ?else
-       $BLACKLIST_DISPOSITION
-   ?endif
-?else
-   ?if ! "$SW_DBL_IPSET"
-   ?   error The BLACKLIST action may only be used with ipset-based dynamic blacklisting
-   ?endif
-
-   DEFAULTS -,DROP,-
-   #
-   # Add to the blacklist
-   #
-   ?if passed(@3)
-       ADD($SW_DBL_IPSET:src:@3)
-   ?elsif $SW_DBL_TIMEOUT
-       ADD($SW_DBL_IPSET:src:$SW_DBL_TIMEOUT)
-   ?else
-       ADD($SW_DBL_IPSET:src)
-   ?endif
-   #
-   # Dispose of the packet if asked
-   #
-   ?if passed(@2)
-      @2
-   ?endif
-?endif

Shorewall/Actions/action.Broadcast

@@ -1,65 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Broadcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Broadcast[([<action>|[,{audit|-}])]
-#
-# Default action is DROP
-#
-###############################################################################
-
-DEFAULTS DROP,-
-
-?if __ADDRTYPE
-    @1	-	-	-	;; -m addrtype --dst-type BROADCAST
-    @1	-	-	-	;; -m addrtype --dst-type ANYCAST
-?else
-    ?begin perl;
-
-    use strict;
-    use Shorewall::IPAddrs;
-    use Shorewall::Config;
-    use Shorewall::Chains;
-
-    my ( $action, $audit ) = get_action_params( 2 );
-    my $chainref           = get_action_chain;
-    my ( $level, $tag )    = get_action_logging;
-
-    fatal_error "Invalid parameter to action Broadcast" if supplied $audit && $audit ne 'audit';
-
-    my $target             = require_audit ( $action , $audit );
-
-    if ( $family == F_IPV4 ) {
-        add_commands $chainref, 'for address in $ALL_BCASTS; do';
-    } elsif ($family == F_IPV6 ) {
-        add_commands $chainref, 'for address in $ALL_ACASTS; do';
-    }
-
-    incr_cmd_level $chainref;
-    log_rule_limit $level, $chainref, 'Broadcast' , $action, '', $tag, 'add', ' -d $address ' if $level ne '';
-    add_jump $chainref, $target, 0, "-d \$address ";
-    decr_cmd_level $chainref;
-    add_commands $chainref, 'done';
-
-    1;
-
-    ?end perl;
-?endif

Shorewall/Actions/action.DropDNSrep

@@ -1,10 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.DropDNSrep
-#
-# This macro silently drops DNS UDP replies that are in the New state
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-DEFAULTS DROP
-@1	-	-	udp	-	53 { comment="Late DNS Replies" }

Shorewall/Actions/action.FIN

@@ -1,33 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.FIN
-#
-# FIN Action
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# FIN[([<action>])]
-#
-# Default action is ACCEPT
-#
-###############################################################################
-
-DEFAULTS ACCEPT,-
-
-@1	 -	-	;;+ -p 6 --tcp-flags ACK,FIN ACK,FIN

Shorewall/Actions/action.Limit

@@ -1,70 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Limit
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Limit(<recent-set>,<num-connections>,<timeout>)
-#
-###############################################################################
-
-DEFAULTS -,-,-
-
-?begin perl
-
-use strict;
-use Shorewall::Config;
-use Shorewall::Chains;
-
-my $chainref        = get_action_chain;
-my @param           = get_action_params(3);
-my ( $level, $tag ) = get_action_logging;
-
-@param = split( ',', $tag ), $tag = $param[0] unless supplied( join '', @param );
-
-fatal_error 'Limit rules must include <set name>,<max connections>,<interval> as the log tag or as parameters' unless @param == 3;
-
-my $set   = $param[0];
-
-for ( @param[1,2] ) {
-    fatal_error 'Max connections and interval in Limit rules must be numeric (' . join( ':', 'Limit', $level eq '' ? 'none' : $level, $tag ) . ')' unless /^\d+$/
-}
-
-my $count = $param[1] + 1;
-
-require_capability( 'RECENT_MATCH' , 'Limit rules' , '' );
-
-warning_message "The Limit action is deprecated in favor of per-IP rate limiting using the RATE LIMIT column";
-
-add_irule $chainref, recent => "--name $set --set";
-
-if ( $level ne '' ) {
-    my $xchainref = new_chain 'filter' , "$chainref->{name}%";
-    log_irule_limit( $level, $xchainref, '', 'DROP', [], $tag, 'add' , '' );
-    add_ijump $xchainref, j => 'DROP';
-    add_ijump $chainref,  j => $xchainref, recent => "--name $set --update --seconds $param[2] --hitcount $count";
-} else {
-    add_ijump $chainref, j => 'DROP', recent => "--update --name $set --seconds $param[2] --hitcount $count";
-}
-
-add_ijump $chainref, j => 'ACCEPT';
-
-1;
-
-?end perl

Shorewall/Actions/action.Multicast

@@ -1,56 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.Multicast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2011-2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Multicast[([<action>|-[,{audit|-}])]
-#
-# Default action is DROP
-#
-###############################################################################
-
-DEFAULTS DROP,-
-
-?if __ADDRTYPE
-    @1	-	-	-	;; -m addrtype --dst-type MULTICAST
-?else
-    ?begin perl;
-
-    use strict;
-    use Shorewall::IPAddrs;
-    use Shorewall::Config;
-    use Shorewall::Chains;
-
-    my ( $action, $audit ) = get_action_params( 2 );
-    my $chainref           = get_action_chain;
-    my ( $level, $tag )    = get_action_logging;
-
-    fatal_error "Invalid parameter to action Multicast" if supplied $audit && $audit ne 'audit';
-
-    my $target = require_audit ( $action , $audit );
-    my $dest   = ( $family == F_IPV4 ) ? join( ' ', '-d', IPv4_MULTICAST . ' ' ) : join( ' ', '-d', IPv6_MULTICAST . ' ' );
-
-    log_rule_limit( $level, $chainref, 'Multicast' , $action, '', $tag, 'add', $dest ) if $level ne '';
-    add_jump $chainref, $target, 0, $dest;
-
-    1;
-
-    ?end perl;
-?endif

Shorewall/Actions/action.allowBcast

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.allowBcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# allowBcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Broadcast(A_ACCEPT)
-    ?else
-	?error "Invalid argument (@1) to allowBcast"
-    ?endif
-?else
-    Broadcast(ACCEPT)
-?endif

Shorewall/Actions/action.allowMcast

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.allowMcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# allowMcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Multicast(A_ACCEPT)
-    ?else
-	?error "Invalid argument (@1) to allowMcast"
-    ?endif
-?else
-    Multicast(ACCEPT)
-?endif

Shorewall/Actions/action.allowinUPnP

@@ -1,40 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.allowinUPnP
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# allowinUPnP[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	A_ACCEPT - - 17 1900
-	A_ACCEPT - -  6 49152
-    ?else
-	?error "Invalid argument (@1) to allowinUPnP"
-    ?endif
-?else
-    ACCEPT - - 17 1900
-    ACCEPT - -	6 49152
-?endif

Shorewall/Actions/action.dropBcast

@@ -1,39 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropBcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropBcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Broadcast(A_DROP)
-    ?else
-	?error "Invalid argument (@1) to dropBcast"
-    ?endif
-?else
-    Broadcast(DROP)
-?endif
-

Shorewall/Actions/action.dropBcasts

@@ -1,39 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropBcasts
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropBcasts[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Broadcast(A_DROP)
-    ?else
-	?error "Invalid argument (@1) to dropBcasts"
-    ?endif
-?else
-    Broadcast(DROP)
-?endif
-

Shorewall/Actions/action.dropMcast

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropMcast
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropMcast[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	Multicast(A_DROP)
-    ?else
-	?error "Invalid argument (@1) to dropMcast"
-    ?endif
-?else
-    Multicast(DROP)
-?endif

Shorewall/Actions/action.dropNotSyn

@@ -1,38 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.dropNotSyn
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# dropNotSyn[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	A_DROP {proto=6:!syn}
-    ?else
-	?error "Invalid argument (@1) to dropNotSyn"
-    ?endif
-?else
-    DROP {proto=6:!syn}
-?endif

Shorewall/Actions/action.forwardUPnP

@@ -1,43 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.forwardUPnP
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# forwardUPnP
-#
-###############################################################################
-
-DEFAULTS -
-
-?begin perl
-
-use strict;
-use Shorewall::Config;
-use Shorewall::Chains;
-
-my $chainref = get_action_chain;
-
-set_optflags( $chainref, DONT_OPTIMIZE );
-
-add_commands( $chainref , '[ -f ${VARDIR}/.forwardUPnP ] && cat ${VARDIR}/.forwardUPnP >&3' );
-
-1;
-
-?end perl

Shorewall/Actions/action.rejNotSyn

@@ -1,39 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/action.rejNotSyn
-#
-# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
-#
-# (c) 2017 Tom Eastep (teastep@shorewall.net)
-#
-# Complete documentation is available at https://shorewall.org
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of Version 2 of the GNU General Public License
-# as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# rejNotSyn[([audit])]
-#
-###############################################################################
-
-DEFAULTS -
-
-?if passed(@1)
-    ?if @1 eq 'audit'
-	?require AUDIT_TARGET
-	A_REJECT {proto=6:!syn}
-    ?else
-	?error "Invalid argument (@1) to rejNotSyn"
-    ?endif
-?else
-    REJECT(tcp-reset) {proto=6:!syn}
-?endif
-

Shorewall/Contrib/swping

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#     Shorewall WAN Interface monitor - V5.2
+#     Shorewall WAN Interface monitor - V4.4
 #
 #     Inspired by Angsuman Chakraborty's gwping script.
 #
@@ -21,7 +21,7 @@
 #	along with this program; if not, write to the Free Software
 #	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
-#  For information about this script, see  https://shorewall.org/MultiISP.html#swping.
+#  For information about this script, see  http://www.shorewall.net/MultiISP.html#swping.
 #
 ###########################################################################################
 #

Shorewall/Contrib/swping.init

@@ -1,5 +1,5 @@
 #!/bin/sh
-#     Shorewall WAN Interface monitor - V5.2
+#     Shorewall WAN Interface monitor - V4.4
 #
 #     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
 #
@@ -7,7 +7,7 @@
 #
 #	On most distributions, this file should be called /etc/init.d/shorewall.
 #
-#	Complete documentation is available at https://shorewall.org
+#	Complete documentation is available at http://shorewall.net
 #
 #	This program is free software; you can redistribute it and/or modify
 #	it under the terms of Version 2 of the GNU General Public License

Shorewall/INSTALL

@@ -18,7 +18,7 @@ Shoreline Firewall (Shorewall) Version 5
 
 ---------------------------------------------------------------------------
 
-Please see https://shorewall.org/Install.htm for installation
+Please see http://www.shorewall.net/Install.htm for installation
 instructions.
 
 

Shorewall/Macros/IPFS-swarm

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
-#
-# This macro handles IPFS data traffic (the connection to IPFS swarm).
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     4001

Shorewall/Macros/macro.AllowICMPs

@@ -0,0 +1,13 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.AllowICMPs
+#
+# This macro ACCEPTs needed ICMP types.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+?COMMENT Needed ICMP types
+
+DEFAULT ACCEPT
+PARAM	-	-	icmp	fragmentation-needed
+PARAM	-	-	icmp	time-exceeded

Shorewall/Macros/macro.BLACKLIST

@@ -0,0 +1,13 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.blacklist
+#
+# This macro handles blacklisting using BLACKLIST_DISPOSITION and BLACKLIST_LOGLEVEL.
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+?if $BLACKLIST_LOGLEVEL
+blacklog
+?else
+$BLACKLIST_DISPOSITION
+?endif

Shorewall/Macros/macro.Bitcoin

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.Bitcoin
-#
-# Macro for handling Bitcoin P2P traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	8333

Shorewall/Macros/macro.BitcoinRPC

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinRPC
-#
-# Macro for handling Bitcoin RPC traffic
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	8332

Shorewall/Macros/macro.BitcoinRegtest

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinRegtest
-#
-# Macro for handling Bitcoin P2P traffic (Regtest mode)
-#
-##############################################################################################################################################################
-#ACTION     SOURCE      DEST        PROTO   DPORT   SPORT   ORIGDEST    RATE    USER    MARK    CONNLIMIT   TIME    HEADERS SWITCH  HELPER
-PARAM       -           -           tcp     18444

Shorewall/Macros/macro.BitcoinTestnet

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinTestnet
-#
-# Macro for handling Bitcoin P2P traffic (Testnet mode)
-#
-##############################################################################################################################################################
-#ACTION     SOURCE      DEST        PROTO   DPORT   SPORT   ORIGDEST    RATE    USER    MARK    CONNLIMIT   TIME    HEADERS SWITCH  HELPER
-PARAM       -           -           tcp     18333

Shorewall/Macros/macro.BitcoinTestnetRPC

@@ -1,8 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinTestnetRPC
-#
-# Macro for handling Bitcoin RPC traffic (Testnet and Regtest mode)
-#
-##############################################################################################################################################################
-#ACTION     SOURCE      DEST        PROTO   DPORT   SPORT   ORIGDEST    RATE    USER    MARK    CONNLIMIT   TIME    HEADERS SWITCH  HELPER
-PARAM       -           -           tcp     18332

Shorewall/Macros/macro.BitcoinZMQ

@@ -1,9 +0,0 @@
-#
-# Shorewall --/usr/share/shorewall/macro.BitcoinZMQ
-#
-# Macro for handling Bitcoin ZMQ traffic
-# See https://github.com/bitcoin/bitcoin/blob/master/doc/zmq.md
-#
-##############################################################################################################################################################
-#ACTION		SOURCE		DEST		PROTO	DPORT	SPORT	ORIGDEST	RATE	USER	MARK	CONNLIMIT	TIME	HEADERS	SWITCH	HELPER
-PARAM		-		-		tcp	28332

Shorewall/Macros/macro.Cockpit

@@ -1,12 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Cockpit
-#
-# This macro handles Time protocol (RFC868).
-# Unless you are supporting extremely old hardware or software,
-# you shouldn't be using this.  NTP is a superior alternative.
-#
-#		By Eric Teeter
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	9090

Shorewall/Macros/macro.Drop

@@ -0,0 +1,49 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.Drop
+#
+# This macro generates the same rules as the Drop default action
+# It is used in place of action.Drop when USE_ACTIONS=No.
+#
+# Example:
+#
+#	Drop	net	all
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+#
+# Don't log 'auth' DROP
+#
+DROP	-	-	tcp	113
+#
+# Drop Broadcasts so they don't clutter up the log
+# (broadcasts must *not* be rejected).
+#
+dropBcast
+#
+# ACCEPT critical ICMP types
+#
+ACCEPT	-	-	icmp	fragmentation-needed
+ACCEPT	-	-	icmp	time-exceeded
+#
+# Drop packets that are in the INVALID state -- these are usually ICMP packets
+# and just confuse people when they appear in the log (these ICMPs cannot be
+# rejected).
+#
+dropInvalid
+#
+# Drop Microsoft noise so that it doesn't clutter up the log.
+#
+DROP	-	-	udp	135,445
+DROP	-	-	udp	137:139
+DROP	-	-	udp	1024:	137
+DROP	-	-	tcp	135,139,445
+DROP	-	-	udp	1900
+#
+# Drop 'newnotsyn' traffic so that it doesn't get logged.
+#
+dropNotSyn
+#
+# Drop late-arriving DNS replies. These are just a nuisance and clutter up
+# the log.
+#
+DROP	-	-	udp	-	53

Shorewall/Macros/macro.DropDNSrep

@@ -0,0 +1,12 @@
+#
+# Shorewall -- /usr/share/shorewall/macro.DropDNSrep
+#
+# This macro silently drops DNS UDP replies
+#
+###############################################################################
+#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
+
+?COMMENT Late DNS Replies
+
+DEFAULT DROP
+PARAM	-	-	udp	-	53

Shorewall/Macros/macro.FreeIPA

@@ -1,16 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.FreeIPA
-#
-# This macro handles FreeIPA server traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-DNS
-HTTP
-HTTPS
-Kerberos
-Kpasswd
-LDAP
-LDAPS
-NTP

Shorewall/Macros/macro.IPFS-API

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-API
-#
-# This macro handles IPFS API port (commands for the IPFS daemon).
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     5001

Shorewall/Macros/macro.IPFS-gateway

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-gateway
-#
-# This macro handles the IPFS gateway to HTTP.
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     8080

Shorewall/Macros/macro.IPFS-swarm

@@ -1,9 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.IPFS-swarm
-#
-# This macro handles IPFS data traffic (the connection to IPFS swarm).
-#
-###############################################################################
-#ACTION SOURCE  DEST    PROTO   DPORT   SPORT   ORIGDEST        RATE   USER
-
-PARAM   -       -       tcp     4001

Shorewall/Macros/macro.IPMI

@@ -11,20 +11,13 @@
 #ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
 
 PARAM	-	-	tcp	623		# RMCP
-PARAM	-	-	udp	623		# RMCP
 PARAM	-	-	tcp	3668,3669	# Virtual Media, Secure (Dell)
-PARAM	-	-	tcp	5120,5122,5123	# CD,FD,HD (Asus, Aten)
+PARAM	-	-	tcp	5120,5123	# CD, floppy (Asus, Aten)
 PARAM	-	-	tcp	5900,5901	# Remote Console (Aten, Dell)
 PARAM	-	-	tcp	7578		# Remote Console (AMI)
-PARAM	-	-	tcp	8889		# WS-MAN
+PARAM	-	-	udp	623		# RMCP
 HTTP
-Telnet
-SNMP
-
-# TLS/secure ports
-PARAM	-	-	tcp	3520		# Remote Console (Redfish)
-PARAM	-	-	tcp	3669		# Virtual Media (Dell)
-PARAM	-	-	tcp	5124,5126,5127	# CD,FD,HD (AMI)
-PARAM	-	-	tcp	7582		# Remote Console (AMI)
 HTTPS
+SNMP
 SSH						# Serial over Lan
+Telnet

Shorewall/Macros/macro.Kpasswd

@@ -1,10 +0,0 @@
-#
-# Shorewall -- /usr/share/shorewall/macro.Kpasswd
-#
-# This macro handles Kerberos "passwd" traffic.
-#
-###############################################################################
-#ACTION	SOURCE	DEST	PROTO	DPORT	SPORT	ORIGDEST	RATE	USER
-
-PARAM	-	-	tcp	464
-PARAM	-	-	udp	464