shorewall-maclist 5 maclist Shorewall MAC Verification file /etc/shorewall/maclist This file is used to define the MAC addresses and optionally their associated IP addresses to be allowed to use the specified interface. The feature is enabled by using the maclist option in the shorewall-interfaces(5) or shorewall-hosts(5) configuration file. The columns in the file are as follows. DISPOSITION ACCEPT or DROP (if MACLIST_TABLE=filter in shorewall.conf(5), then REJECT is also allowed) INTERFACE Network interface to a host. If the interface names a bridge, it may be optionally followed by a colon (":") and a physical port name (e.g., br0:eth4). MAC MAC address of the host -- you do not need to use the Shorewall format for MAC addresses here. If IP ADDRESSESES is supplied then MAC can be supplied as a dash (-) IP ADDRESSES (Optional) If specified, both the MAC and IP address must match. This column can contain a comma-separated list of host and/or subnet addresses. If your kernel and iptables have iprange match support then IP address ranges are also allowed. /etc/shorewall/maclist shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5), shorewall-ipsec(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5), shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-route_routes(5), shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)