shorewall6-exclusion 5 exclusion Exclude a set of hosts from a definition in a shorewall6 configuration file. !address-or-range[,address-or-range] Exclusion is used when you wish to exclude one or more addresses from a definition. An exclaimation point is followed by a comma-separated list of addresses. The addresses may be single host addresses (e.g., fe80::2a0:ccff:fedb:31c4) or they may be network addresses in CIDR format (e.g., fe80::2a0:ccff:fedb:31c4/64). If your kernel and ip6tables include iprange support, you may also specify ranges of ip addresses of the form lowaddress-highaddress No embedded whitespace is allowed. Exclusion can appear after a list of addresses and/or address ranges. In that case, the final list of address is formed by taking the first list and then removing the addresses defined in the exclusion. /etc/shorewall6/hosts /etc/shorewall6/masq /etc/shorewall6/rules /etc/shorewall6/tcrules shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5), shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5), shorewall6-maclist(5), shorewall6-params(5), shorewall6-policy(5), shorewall6-providers(5), shorewall6-route_rules(5), shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5), shorewall6-tcrules(5), shorewall6-tos(5), shorewall6-tunnels(5), shorewall-zones(5)