Shorewall and ipp2p
Tom
Eastep
2004
2005
2006
2009
Thomas M. Eastep
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
GNU Free Documentation
License
.
This article applies to Shorewall 4.3 and
later. If you are running a version of Shorewall earlier than Shorewall
4.3.5 then please see the documentation for that
release.
Introduction
Shorewall includes support for the ipp2p match facility. This is a
departure from my usual policy in that the ipp2p match facility is
included in xtables-addons and is unlikely to ever be included in the
kernel.org source tree. Questions about how to install xtables-addons or
how to build your kernel and/or iptables should not be posted on the
Shorewall mailing lists but should rather be referred to the Netfilter
Mailing List.
Scope
In the following files, the "PROTO" or "PROTOCOL" column may contain
"ipp2p":
/etc/shorewall/tcrules
/etc/shorewall/accounting
/etc/shorewall/rules (Not
Recommend. But if you insist, then you should place the rules in the
ESTABLISHED section of that file).
When the PROTO or PROTOCOL column contains "ipp2p" then the DEST
PORT(S) or PORT(S) column may contain a recognized ipp2p option
(Shorewall-perl 4.2.5 and later accepts a comma-separated list of
options); for a list of the options and their meaning, at a root prompt
type:
iptables -m ipp2p --help
You must not include the leading "--" on the option(s); Shorewall
will supply those characters for you. If you do not include an option then
Shorewall will assume "edk,kazaa,gnu,dc".
If 'ipp2p' is specified, Shorewall will substitute
"edk,kazaa,gnu,dc".
Example:
Example 2 in the ipp2p documentation recommends the following
iptables rules:
01# iptables -t mangle -A PREROUTING -p tcp -j CONNMARK --restore-mark
02# iptables -t mangle -A PREROUTING -p tcp -m mark ! --mark 0 -j ACCEPT
03# iptables -t mangle -A PREROUTING -p tcp -m ipp2p --ipp2p -j MARK --set-mark 1
04# iptables -t mangle -A PREROUTING -p tcp -m mark --mark 1 -j CONNMARK --save-mark
05# iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 1 -j CLASSIFY --set-class 1:12
06# iptables -t mangle -A POSTROUTING -o eth1 -m mark --mark 1 -j CLASSIFY --set-class 2:12
Let's examine the above rules more carefully.
The individual packets of a P2P data stream do not all carry
tell-tale signs that are identifiable as being a particular P2P
application. So simply asking the ipp2p match code to mark each individual
packet isn't enough because only those packets that carry these tell-tale
signs will be marked. Fortunately, Netfilter provides a different type of
mark -- the Connection Mark which is associated
with the entry in the conntrack table rather that with the individual
packet. You can see connection mark values with the shorewall
show connections command:
gateway:/etc/test# shorewall show connections
Shorewall-2.5.6 Connections at gateway - Tue Oct 4 15:45:11 PDT 2005
tcp 6 269712 ESTABLISHED src=192.168.3.8 dst=206.124.146.177 sport=50584 dport=993 packets=4899
bytes=302282 src=206.124.146.177 dst=192.168.3.8 sport=993 dport=50584 packets=7760 bytes=10032928 [ASSURED] mark=0 use=1
...
Connection marks are persistent -- that is, once a connection mark
is set it retains its value until the connection is terminated.
Netfilter provides features to:
Mark individual packets with a numeric value.
Save the current packet mark value in the connection
mark.
Restore the value in the connection mark to the current
packet.
The strategy employed in the above rules is to mark the connection
of each P2P session with a mark value of 1. That way, each packet that is
part of the session can be marked using the 'Restore' function and can be
classified accordingly.
Rule 01# restores the connection mark into the current
packet.
Rule 02# tests that restored mark and if it is not equal to
zero, the packet is ACCEPTed (no further processing).
Rule 03# asks the ipp2p match module to examine the packet and
if it is identifiable as part of a P2P session, mark the packet with
value 1.
Rule 04# saves the current packet mark in the conntrack table if
the current mark value is 1 (in other words, if it was marked by rule
03#).
Rule 05# classifies the packet to traffic shaping class 1:12 if
it is going out of eth0 and has mark value 1.
Rule 06# classifies the packet to traffic shaping class 2:12 if
it is going out of eth1 and has mark value 1.
These are implemented in the /etc/shorewall/tcrules file as
follows:
#MARK SOURCE DEST PROTO PORT(S) CLIENT USER TEST
# PORT(S)
RESTORE:P - - tcp
CONTINUE:P - - tcp - - - !0
1:P - - ipp2p ipp2p
SAVE:P - - tcp - - - 1
1:12 - eth0 - - - - 1
2:12 - eth1 - - - - 1
These rules do exactly the same thing as their counterparts
described above.
One change that I recommend --do your marking in the FORWARD chain
rather than in the PREROUTING chain:
#MARK SOURCE DEST PROTO PORT(S) CLIENT USER TEST
# PORT(S)
RESTORE:F - - tcp
CONTINUE:F - - tcp - - - !0
1:F - - ipp2p ipp2p
SAVE:F - - tcp - - - 1
1:12 - eth0 - - - - 1
2:12 - eth1 - - - - 1
It will work the same and will work with a Multi-ISP setup.