Shorewall Error Messages
Tom
Eastep
2005-10-03
2004
2005
Thomas M. Eastep
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
GNU Free Documentation
License
.
Introduction
Shorewall can produce a wide variety of error messages when a
problem is detected with your configuration. This article attempts to
explain the cause of and cures for some of these messages.
Messages Produced by /sbin/shorewall
Some error messages are produced by the /sbin/shorewall utility.
These messages are detailed in this section.
ERROR: <label> must specify a simple file name:
<name>
This means that you have specified a restore file name with a
"/". Restore files must be simple file names with no slashes.
ERROR: Shorewall is not properly installed
The files /usr/share/shorewall/firewall
and/or /usr/share/shorewall/version do not
exist.
ERROR: <file name> exists and is not a saved Shorewall
configuration
The named file in /var/lib/shorewall
exists but is not executable.
ERROR: Reserved file name: <file name>
You have specified either save or
restore-base as the name of a restore file --
those names are reserved for use by Shorewall.
ERROR: Currently-running Configuration Not Saved
During processing of a shorewall save
command, the iptables-save command failed.
ERROR: /var/lib/shorewall/restore-base does not exist
The shorewall start and shorewall
restart commands create a file called
/var/lib/shorewall/restore-base which forms the
basis for creating a restore file using shorewall
save. This error message is issued when shorewall
save is not able to find that file.
ERROR: The program specified in IPTABLES does not exist or is
not executable
The IPTABLES option in
/etc/shorewall/shorewall.conf specifies a file
that is not executable.
ERROR: Can't find iptables executable
There is no executable file named "iptables" in any directory
in $PATH.
ERROR: The program specified in SHOREWALL_SHELL does not exist
or is not executable
The SHOREWALL_SHELL option in
/etc/shorewall/shorewall.conf names does not
name an executable file.
ERROR: /var/lib/shorewall/<file> exists and is not a saved
Shorewall configuration
The restore file (<file>) specified or implied in a
shorewall save command already exists but is not
executable (and hence cannot be a value restore file). Either
remove/rename the file or specify a different file name.
Messages Produced by /usr/share/shorewall/firewall
The program /usr/share/shorewall/firewall is
responsible for parsing the Shorewall configuration files and for creating
and changing the Netfilter configuration. Some of the error messages
generated by this program are listed below.
ERROR: Invalid nested zone syntax: :<parent-zone>
The zone name in the ZONE column of
/etc/shorewall/zones may not start with a colon
(":").
ERROR: Sub-zones of the firewall zone are not allowed
The firewall zone may not be defined to have zones nested
within it.
ERROR: Parent zone not defined: <parent-zone>
When defining nested zones in
/etc/shorewall/zones, the parent zone must be
defined before any zones nested inside of it.
ERROR: Zone name longer than 5 characters: <zone>
Zone names are restricted to 5 characters or less in
length.
ERROR: Illegal zone name "<zone>" in zones file
The zone name quoted in the error message begins with a digit
-- zone names must begin with an alphabetic character.
ERROR: Reserved zone name "<zone>" in zones file
The names "none" and "all" are reserved and may not be used as
zone names in /etc/shorewall/zones.
ERROR: Zone <zone> is defined more than once
There are two records in
/etc/shorewall/zones that define the named
zone.
ERROR: Your kernel and/or iptables does not support policy
match
You have defined a zone of type ipsec in
/etc/shorewall/zones or have specified the
ipsec option in an /etc/shorewall/hosts record
but your kernel and/or iptables don't include policy match support
-- see this article for
details.
ERROR: The firewall zone may not be nested
You have defined a zone of type firewall to be nested inside another zone.
Shorewall does not support such nesting.
ERROR: OPTIONS not allowed on the firewall zone
The zone of type firewall may
not have any options specified in the OPTIONS, IN OPTIONS or OUT
OPTIONS columns of /etc/shorewall/zones.
ERROR: Only one firewall zone may be defined
You may have only one record in
/etc/shorewall/zones that has type firewall.
ERROR: No ipv4 or ipsec Zones Defined
You must define at least one ipv4 or ipsec zone in
/etc/shorewall/zones.
ERROR: No Firewall Zone Defined
You must define one (and only one) zone if type firewall in
/etc/shorewall/zones.
ERROR: Invalid Mark or Mask value: <number>
Shorewall-assigned packet and connection marks are limited to
the range 1-255.
ERROR: Invalid zone definition for zone <zone>
The zone named in the message is defined to be associated with
an interface in /etc/shorewall/interfaces yet
it also has an entry for that same interface in
/etc/shorewall/hosts.
ERROR: Invalid zone (<zone>) in record
"<record>"
The zone named in the ZONE column of the listed record from
/etc/shorewall/interfaces or
/etc/shorewall/hosts is not defined in
/etc/shorewall/zones.
ERROR: The routeback option may not be specified on a multi-zone
interface
The ZONE column of a record in
/etc/shorewall/interfaces was empty ("-"). Such
interfaces may not specify the routeback option.
ERROR: The "detectnets" option may not be used with a wild-card
interface
The interface name in the INTERFACE column is a wild-card
(ends with "+"). Such interfaces may not specify the detectnets option.
ERROR: Duplicate Interface <interface>
The named interface has two entries in
/etc/shorewall/interfaces.
ERROR: Invalid Interface Name: <interface>
The interface name contains a colon (":") or is "+". If the
name includes a ":", you probably need to read this
article.
ERROR: The 'norfc1918' option may not be specified on an
interface with an RFC 1918 address. Interface:
<interface>
The <interface> named in the message is configured with
an IP address that is reserved by RFC 1918 -- that address is
incompatible with the norfc1918
interface option.
ERROR: Unknown interface (<interface>) in record
"<record>"
The <interface> name listed in the
<record> from
/etc/shorewall/hosts was not defined in
/etc/shorewall/interfaces.
ERROR: Invalid HOST(S) column contents: <hosts>
The contests of the HOST(S) column in a record from
/etc/shorewall/hosts does not follow the proper
syntax for that column in that it doesn't contain at least one colon
(":"). See the /etc/shorewall/hosts
documentation.
ERROR: Bridged interfaces may not be defined in
/etc/shorewall/interfaces: <interface>[:<address>]
The named interface appears in /etc/shorewall/hosts and
appears as a bridge port (after a colon) but is also defined in
/etc/shorewall/interfaces.
ERROR: Undefined zone <zone>
The named zone appears in the /etc/shorewall/policy file but
not in the /etc/shorewall/zones file.
ERROR: <policy record>: NONE policy not allowed to/from
the <firewall-zone-name> zone
Shorewall does not support a policy of NONE when the source or
destination zone is the firewall itself.
ERROR: <policy record>: NONE policy not allowed with
"all"
Shorewall does not support a policy of NONE when the source or
destination zone is "all".
ERROR: Duplicate policy: <source zone> <destination
zone> <policy>
There is an earlier record in the file with the same
<source zone> and <destination zone>
ERROR: Can't determine the IP address of
<interface>
You have specified DETECT_DNAT_ADDRS=Yes in
/etc/shorewall/shorewall.conf and Shorewall is unablee to determine
the IP address of the named <interface>.
Be sure that the interface is started before starting Shorewall or
set DETECT_DNAT_ADDRS=No.
ERROR: Invalid gateway zone (<zone>) -- Tunnel
"<record>
The listed <zone> name appears in
the GATEWAY ZONE column of the listed
<record> from
/etc/shorewall/tunnels but is not defined in
/etc/shorewall/zones.
ERROR: No hosts on <interface> have the maclist option
specified
The named <interface> appears in a
record in /etc/shorewall/maclist yet that
interface's record in /etc/shorewall/interfaces
does not specify the maclist option
and no record in /etc/shorewall/hosts that
names that interface includes the maclist option.
ERROR: Interface <interface> must be up before Shorewall
can start
You have specified the maclist option for this interface but the
command ip list show <interface>
fails.
ERROR: Unknown interface <interface>
The interface appears in a configuration file but is not
defined in /etc/shorewall/interfaces.
ERROR: BRIDGING=Yes requires Physdev Match support in your
Kernel and iptables
You have set BRIDGING=Yes in
/etc/shorewall/shorewall.conf but it appears
that your kernel and/or iptables do not have physdev match
support.
ERROR: Invalid Action Name: <action>
The <action> contains one of the following characters:
".", "-", or "%". Those characters are not allowed in an action
name.
ERROR: Invalid Macro Parameter in rule "<rule>"
The value being passed to a parameterized macro is not ACCEPT,
DROP, REJECT, LOG, QUEUE or CONTINUE.
ERROR: Missing Action File: action.<action name>
The specified <action name> has an entry in
/usr/share/shorewall/actions.std or in
/etc/shorewall/actions but the corresponding
action file does not exist on the CONFIG_PATH.
ERROR: Unknown interface <interface> in rule:
"<rule>"
You have BRIDGING=No in
/etc/shorewall/shorewall.conf and the
<interface> given in a rule does not
match an entry in
/etc/shorewall/interfaces.
ERROR: SNAT may no longer be specified in a DNAT rule; use
/etc/shorewall/masq instead
In earlier Shorewall versions, the ORIGINAL DEST column
allowed following the original destination IP address with ":" and
an address to use as the source of the forwarded connection request.
Now that /etc/shorewall/masq supports qualification of SNAT rules by
protocol and port, this feature is no longer required and has been
deimplemented.
ERROR: "Invalid Source in rule "<rule>"
The SOURCE column has the firewall zone name immediately
followed by "!". This syntax is use to exclude a subzone and
Shorewall currently doesn't support subzones of the firewall
zone.
ERROR: Rule "<rule>" - Destination may not be specified by
MAC Address
Netfilter (and hence Shorewall) does not allow qualification
of a rule by destination source IP address.
ERROR: Destination interface not allowed with
<action>
The named <action> will be ACCEPT+
or NONAT. These actions are inforced in part in the PREROUTING nat
chain where the destination interface is not yet known (because the
packet has not yet been routed). As a result, the DESTINATION column
may not contain an interface name.
ERROR: Only DNAT and REDIRECT rules may specify destination
mapping; rule "<rule>"
The <rule> specifies a server
address that is different from the ORIGINAL DEST address and/or it
specifies a server port that is different from the destination port
but the ACTION is neither DNAT[-] nor REJECT[-].
ERROR: Empty source zone or qualifier: rule
"<rule>"
The SOURCE column is of one of the forms
<zone>:,
:<qualifier> or :.
ERROR: Exclude list only allowed with DNAT or REDIRECT
In DNAT[-] and REDIRECT[-] rules, you can have a SOURCE of the
form
<zone>:<net1>!<net2>.
This means <net1> in the
<zone> zone except
for <net2>. This syntax is not
available with other ACTIONs.
ERROR: Invalid use of a user-qualification: rule
"<rule>"
The USER/GROUP column may only have and entry if the SOURCE is
the firewall zone.
ERROR: Empty destination zone or qualifier: rule
"<rule>"
The DEST column is of one of the forms
<zone>:,
:<qualifier> or :.
ERROR: Undefined Client Zone in rule "<rule>"
The zone given in the SOURCE column was not defined in
/etc/shorewall/zones.
ERROR: Undefined Server Zone in rule "<rule>"
The zone given in the DEST column was not defined in
/etc/shorewall/zones.
ERROR: Rules may not override a NONE policy: rule
"<rule>"
If the policy from zone z1 to zone z2 is NONE that means that
Shorewall sets up no infrastructure to handle traffic from z1 to z2.
Consequently, you cannot have any rules that control traffic from z1
to z2.
ERROR: Invalid Action in rule "<rule>"
The ACTION column contains an action that is not one of the
built-in actions and it is not defined in
/etc/shorewall/actions or in
/usr/share/shorewall/actions.std.
ERROR: Unable to determine the routes through interface
<interface>
You have specified <interface> in
the SUBNET column of /etc/shorewall/masq which
means that Shorewall is supposed to determine the network(s) routed
through that interface. To do that, Shorewall issues the command
ip addr ls dev <interface> and that command
failed. This usually means that you are trying to start Shorewall
before the <interface> is brought
up.
ERROR: No appropriate chain for zone <z1> to zone
<z2>
There is no policy defined in
/etc/shorewall/policy for connections from zone
<z1> to zone
<z2>.
Warnings
This sections describes some of the more common warnings generated
by Shorewall.
Warning: default route ignored on interface
<interface>
This means that the interface named in the SUBNET column of
/etc/shorewall/masq has the default route. This
almost always means that you have the contents of the INTERFACE and
SUBNET columns reversed.
Warning: Zone <zone> is empty
This warning alerts you to the fact tha <zone> is
defined in /etc/shorewall/zones but has no
corresponding entries in
/etc/shorewall/interfaces or in
/etc/shorewall/hosts.
WARNING: Shorewall startup is disabled. To enable startup, set
STARTUP_ENABLED=Yes in /etc/shorewall/shorewall.conf
If you need help understanding that warning message then you
probably need to take up another hobby or line of work.
Iptables Error Messages
By far the most asked about iptables error message is:
iptables: No chain/target/match by that name
This almost always means that you are trying to use a
Shorewall feature that your iptables and/or kernel do not support.
Beginning with version 2.2.0, Shorewall follows this message with a
copy of the iptables command that is failing. Most commonly, the
problem is that one of the match types (keyword following "-m" in
the command) isn't supported by your iptables/kernel. The output of
"shorewall check" shows you what your iptables/kernel
support:
gateway:~# shorewall check
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Shorewall has detected the following iptables/netfilter capabilities:
NAT: Available
Packet Mangling: Available
Multi-port Match: Available
Extended Multi-port Match: Available
Connection Tracking Match: Available
Packet Type Match: Not available
Policy Match: Available
Physdev Match: Available
IP range Match: Available
Verifying Configuration...
...