# # Shorewall version 4 - Macro Template # # /usr/share/shorewall/macro.template # # Macro files are similar to action files with the following exceptions: # # - A macro file is not processed unless the marcro that it defines is # referenced in the /etc/shorewall/rules file or in an action # definition file. # # - Macros are translated directly into one or more rules whereas # actions become their own chain. # # - All entries in a macro undergo substitution when the macro is # invoked in the rules file. # # - Macros used in action bodies may not invoke other macros. # # The columns in the file are the same as those in the action.template file but # have different restrictions: # # Columns are: # # ACTION ACCEPT, DROP, REJECT, DNAT, DNAT-, REDIRECT, CONTINUE, # LOG, QUEUE, PARAM or an name. # # ACCEPT -- allow the connection request # ACCEPT+ -- like ACCEPT but also excludes the # connection from any subsequent # DNAT[-] or REDIRECT[-] rules # NONAT -- Excludes the connection from any # subsequent DNAT[-] or REDIRECT[-] # rules but doesn't generate a rule # to accept the traffic. # DROP -- ignore the request # REJECT -- disallow the request and return an # icmp-unreachable or an RST packet. # DNAT -- Forward the request to another # system (and optionally another # port). # DNAT- -- Advanced users only. # Like DNAT but only generates the # DNAT iptables rule and not # the companion ACCEPT rule. # SAME -- Similar to DNAT except that the # port may not be remapped and when # multiple server addresses are # listed, all requests from a given # remote system go to the same # server. # SAME- -- Advanced users only. # Like SAME but only generates the # NAT iptables rule and not # the companion ACCEPT rule. # REDIRECT -- Redirect the request to a local # port on the firewall. # REDIRECT- # -- Advanced users only. # Like REDIRET but only generates the # REDIRECT iptables rule and not # the companion ACCEPT rule. # # CONTINUE -- (For experts only). Do not process # any of the following rules for this # (source zone,destination zone). If # The source and/or destination IP # address falls into a zone defined # later in /etc/shorewall/zones, this # connection request will be passed # to the rules defined for that # (those) zone(s). # LOG -- Simply log the packet and continue. # QUEUE -- Queue the packet to a user-space # application such as ftwall # (http://p2pwall.sf.net). # PARAM -- If you code PARAM as the action in # a macro then when you invoke the # macro, you can include the name of # the macro followed by a slash ("/") # and an ACTION (either builtin or # user-defined. All instances of # PARAM in the body of the macro will # be replaced with the ACTION. # -- The name of an action defined in # /usr/share/shorewall/actions.std or # in /etc/shorewall/actions. # # The ACTION may optionally be followed # by ":" and a syslog log level (e.g, REJECT:info or # DNAT:debug). This causes the packet to be # logged at the specified level. # # You may also specify ULOG (must be in upper case) as a # log level.This will log to the ULOG target for routing # to a separate log through use of ulogd # (http://www.gnumonks.org/projects/ulogd). # # Actions specifying logging may be followed by a # log tag (a string of alphanumeric characters) # are appended to the string generated by the # LOGPREFIX (in /etc/shorewall/shorewall.conf). # # Example: ACCEPT:info:ftp would include 'ftp ' # at the end of the log prefix generated by the # LOGPREFIX setting. # # SOURCE Source hosts to which the rule applies. May be a zone # defined in /etc/shorewall/zones, $FW to indicate the # firewall itself, "all", "all+" or "none" If the ACTION # is DNAT or REDIRECT, sub-zones of the specified zone # may be excluded from the rule by following the zone # name with "!' and a comma-separated list of sub-zone # names. # # When "none" is used either in the SOURCE or DEST # column, the rule is ignored. # # When "all" is used either in the SOURCE or DEST column # intra-zone traffic is not affected. When "all+" is # used, intra-zone traffic is affected. # # Except when "all[+]" is specified, clients may be # further restricted to a list of subnets and/or hosts by # appending ":" and a comma-separated list of subnets # and/or hosts. Hosts may be specified by IP or MAC # address; mac addresses must begin with "~" and must use # "-" as a separator. # # Hosts may be specified as an IP address range using the # syntax -. This requires that # your kernel and iptables contain iprange match support. # If you kernel and iptables have ipset match support # then you may give the name of an ipset prefaced by "+". # The ipset name may be optionally followed by a number # from 1 to 6 enclosed in square brackets ([]) to # indicate the number of levels of source bindings to be # matched. # # dmz:192.168.2.2 Host 192.168.2.2 in the DMZ # # net:155.186.235.0/24 Subnet 155.186.235.0/24 on the # Internet # # loc:192.168.1.1,192.168.1.2 # Hosts 192.168.1.1 and # 192.168.1.2 in the local zone. # loc:~00-A0-C9-15-39-78 Host in the local zone with # MAC address 00:A0:C9:15:39:78. # # net:192.0.2.11-192.0.2.17 # Hosts 192.0.2.11-192.0.2.17 in # the net zone. # # Alternatively, clients may be specified by interface # by appending ":" to the zone name followed by the # interface name. For example, loc:eth1 specifies a # client that communicates with the firewall system # through eth1. This may be optionally followed by # another colon (":") and an IP/MAC/subnet address # as described above (e.g., loc:eth1:192.168.1.5). # # DEST Location of Server. May be a zone defined in # /etc/shorewall/zones, $FW to indicate the firewall # itself, "all". "all+" or "none". # # When "none" is used either in the SOURCE or DEST # column, the rule is ignored. # # When "all" is used either in the SOURCE or DEST column # intra-zone traffic is not affected. When "all+" is # used, intra-zone traffic is affected. # # Except when "all[+]" is specified, the server may be # further restricted to a particular subnet, host or # interface by appending ":" and the subnet, host or # interface. See above. # # Restrictions: # # 1. MAC addresses are not allowed. # 2. In DNAT rules, only IP addresses are # allowed; no FQDNs or subnet addresses # are permitted. # 3. You may not specify both an interface and # an address. # # Like in the SOURCE column, you may specify a range of # up to 256 IP addresses using the syntax # -. When the ACTION is DNAT or DNAT-, # the connections will be assigned to addresses in the # range in a round-robin fashion. # # If you kernel and iptables have ipset match support # then you may give the name of an ipset prefaced by "+". # The ipset name may be optionally followed by a number # from 1 to 6 enclosed in square brackets ([]) to # indicate the number of levels of destination bindings # to be matched. Only one of the SOURCE and DEST columns # may specify an ipset name. # # The port that the server is listening on may be # included and separated from the server's IP address by # ":". If omitted, the firewall will not modifiy the # destination port. A destination port may only be # included if the ACTION is DNAT or REDIRECT. # # Example: loc:192.168.1.3:3128 specifies a local # server at IP address 192.168.1.3 and listening on port # 3128. The port number MUST be specified as an integer # and not as a name from /etc/services. # # if the ACTION is REDIRECT, this column needs only to # contain the port number on the firewall that the # request should be redirected to. # # PROTO Protocol - Must be "tcp", "tcp:syn", "udp", "icmp", # "ipp2p", "ipp2p:udp", "ipp2p:all" a number, or "all". # "ipp2p*" requires ipp2p match support in your kernel # and iptables. # # "tcp:syn" implies "tcp" plus the SYN flag must be # set and the RST,ACK and FIN flags must be reset. # # DEST PORT(S) Destination Ports. A comma-separated list of Port # names (from /etc/services), port numbers or port # ranges; if the protocol is "icmp", this column is # interpreted as the destination icmp-type(s). # # If the protocol is ipp2p*, this column is interpreted # as an ipp2p option without the leading "--" (example # "bit" for bit-torrent). If no port is given, "ipp2p" is # assumed. # # A port range is expressed as :. # # This column is ignored if PROTOCOL = all but must be # entered if any of the following ields are supplied. # In that case, it is suggested that this field contain # "-" # # If your kernel contains multi-port match support, then # only a single Netfilter rule will be generated if in # this list and the CLIENT PORT(S) list below: # 1. There are 15 or less ports listed. # 2. No port ranges are included. # Otherwise, a separate rule will be generated for each # port. # # SOURCE PORT(S) (Optional) Port(s) used by the client. If omitted, # any source port is acceptable. Specified as a comma- # separated list of port names, port numbers or port # ranges. # # If you don't want to restrict client ports but need to # specify an ORIGINAL DEST in the next column, then # place "-" in this column. # # If your kernel contains multi-port match support, then # only a single Netfilter rule will be generated if in # this list and the DEST PORT(S) list above: # 1. There are 15 or less ports listed. # 2. No port ranges are included. # Otherwise, a separate rule will be generated for each # port. # # ORIGINAL Original destination IP address. Must be omitted ( # DEST or '-') if the macro is to be used from within # an action. See 'man shorewall-rules'. # # RATE LIMIT You may rate-limit the rule by placing a value in # this colume: # # /[:] # # where is the number of connections per # ("sec" or "min") and is the # largest burst permitted. If no is given, # a value of 5 is assumed. There may be no # no whitespace embedded in the specification. # # Example: 10/sec:20 # # USER/GROUP This column may only be non-empty if the SOURCE is # the firewall itself. # # The column may contain: # # [!][][:][+] # # When this column is non-empty, the rule applies only # if the program generating the output is running under # the effective and/or specified (or is # NOT running under that id if "!" is given). # # Examples: # # joe #program must be run by joe # :kids #program must be run by a member of # #the 'kids' group # !:kids #program must not be run by a member # #of the 'kids' group # +upnpd #program named upnpd (This feature was # #removed from Netfilter in kernel # #version 2.6.14). # # A few examples should help show how Macros work. # # /etc/shorewall/macro.FwdFTP: # # #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ # # PORT(S) PORT(S) DEST LIMIT GROUP # DNAT - - tcp 21 # # /etc/shorewall/rules: # # #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ # # PORT(S) PORT(S) DEST LIMIT GROUP # FwdFTP net loc:192.168.1.5 # # The result is equivalent to: # # #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ # # PORT(S) PORT(S) DEST LIMIT GROUP # DNAT net loc:192.168.1.5 tcp 21 # # The substitution rules are as follows: # # ACTION column If in the invocation of the macro, the macro # name is followed by slash ("/") and a second # name, the second name is substituted for each # entry in the macro whose ACTION is PARAM # # For example, if macro FOO is invoked as # FOO/ACCEPT then when expanding macro.FOO, # Shorewall will substitute ACCEPT in each # entry in macro.FOO whose ACTION column # contains PARAM. PARAM may be optionally # followed by a colon and a log level. # # You may also follow the # # Any logging specified when the macro is # invoked is applied to each entry in the macros. # # SOURCE and DEST If the column in the macro is empty then the # columns value in the rules file is used. If the column # in the macro is non-empty then any value in # the rules file is appended with a ":" # separator. # # Example: ############################################### # #ACTION SOURCE DEST PROTO DEST # # PORT(S) # macro.FTP File PARAM net loc tcp 21 # rules File FTP/DNAT - 192.168.1.5 # Result DNAT net loc:192.168.1.5 tcp 21 # # Remaining Any value in the rules file REPLACES the value # columns given in the macro file. # ####################################################################################################### # DO NOT REMOVE THE FOLLOWING LINE FORMAT 2 ####################################################################################################### #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ ORIGINAL # PORT(S) PORT(S) DEST LIMIT GROUP DEST