Shorewall 4.3.8 Shorewall 4.3 is the development thread for Shorewall 4.4 which will be released late in 2009. ---------------------------------------------------------------------------- R E L E A S E 4 . 3 H I G H L I G H T S ---------------------------------------------------------------------------- 1) Support for Shorewall-shell has been discontinued. Shorewall-perl has been combined with Shorewall-common to produce a single Shorewall package. 2) The interfaces file OPTIONs have been extended to largely remove the need for the hosts file. 3) It is now possible to define PREROUTING and OUTPUT marking rules that cause new connections to use the same provider as an existing connection of the same kind. 4) Dynamic Zone support is once again available for IPv4; ipset support is required in your kernel and in iptables. ---------------------------------------------------------------------------- M I G R A T I O N I S S U E S ---------------------------------------------------------------------------- 1) The 'shorewall stop', 'shorewall clear', 'shorewall6 stop' and 'shorewall6 clear' commands no longer read the 'routestopped' file. The 'routestopped' file used is the one that was present at the last 'start', 'restart' or 'restore' command. 2) The old macro parameter syntax (e.g., SSH/ACCEPT) is now deprecated in favor of the new syntax (e.g., SSH(ACCEPT)). The 4.3 documentation uses the new syntax exclusively, although the old syntax continues to be supported. ---------------------------------------------------------------------------- P R O B L E M S C O R R E C T E D I N 4 . 3 . 8 ---------------------------------------------------------------------------- None. ---------------------------------------------------------------------------- K N O W N P R O B L E M S R E M A I N I N G ---------------------------------------------------------------------------- None. ---------------------------------------------------------------------------- N E W F E A T U R E S I N 4 . 3 . 8 ---------------------------------------------------------------------------- None. ---------------------------------------------------------------------------- N E W F E A T U R E S IN 4 . 3 ---------------------------------------------------------------------------- 1) The Shorewall packaging has been completely revamped in Shorewall 4.3. The new packages are: - Shorewall. Includes the former Shorewall-common and Shorewall-perl packages. Includes everything needed to create an IPv4 firewall. - Shorewall6. Requires Shorewall. Adds the components necessary to create an IPv6 firewall. - Shorewall-lite May be installed on a firewall system to run IPv4 firewall scripts generated by Shorewall. - Shorewall6-lite May be installed on a firewall system to run IPv6 firewall scripts generated by Shorewall. 2) The interfaces file supports a new 'nets=' option. This option allows users to restrict a zone's definition to particular networks through an interface without having to use the hosts file. Example interfaces file: #ZONE INTERFACE BROADCAST OPTIONS loc eth3 detect dhcp,logmartians=1,routefilter=1,nets=172.20.1.0/24 dmz eth4 detect logmartians=1,routefilter=1,nets=206.124.146.177 net eth0 detect dhcp,blacklist,tcpflags,optional,routefilter=0,nets=(!172.20.0.0/24,206.124.146.177) net eth2 detect dhcp,blacklist,tcpflags,optional,upnp,routefilter=0,nets=(!172.20.0.0/24,206.124.146.177) loc tun+ detect nets=172.20.0.0/24 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Note that when more than one network address is listed, the list must be enclosed in parentheses. Notice also that exclusion may be used. The first entry in the above interfaces file is equivalent to the following: interfaces: #ZONE INTERFACE BROADCAST OPTIONS - eth0 detect dhcp,logmartians=1,routefilter=1 hosts: #ZONE HOST(S) OPTIONS loc $INT_IF:192.20.1.0/24 broadcast Note that the 'broadcast' option is automatically assumed and need not be explicitly specified. 3) Some websites run applications that require multiple connections from a client browser. Where multiple 'balanced' providers are configured, this can lead to problems when some of the connections are routed through one provider and some through another. To work around this issue, the SAME target has been added to /etc/shorewall/tcrules. SAME may be used in the PREROUTING and OUTPUT chains. When used in PREROUTING, it causes matching connections from an individual local system to all use the same provider. For example: SAME:P 192.168.1.0/24 - tcp 80,443 If a host in 192.168.1.0/24 attempts a connection on TCP port 80 or 443 and it has sent a packet on either of those ports in the last five minutes then the new connection will use the same provider as the connection over which that last packet was sent. When used in the OUTPUT chain, it causes all matching connections to an individual remote system to all use the same provider. For example: SAME $FW - tcp 80,443 If the firewall attempts a connection on TCP port 80 or 443 and it has sent a packet on either of those ports in the last five minutes to the same remote system then the new connection will use the same provider as the connection over which that last packet was sent. Important note: SAME only works with providers that have the 'track' option specified in /etc/shorewall/providers. 4) The file /var/lib/shorewall/.restore has been renamed to /var/lib/shorewall/firewall. A similar change has been made in Shorewall6. When a successful start or restart is completed, the script that executed the command copies itself to to /var/lib/shorewall[6/firewall. 5) Dynamic zone support is once again available for IPv4. This support is built on top of ipsets so you must have installed the xtable-addons. Dynamic zones are available when Shorewall-lite is used as well. Note that the dynamic zone support built into Shorewall provides no additional functionality over what is provided by simply defining a zone in terms of an ipset (see http://www1.shorewall.net/ipsets.html#Dynamic). You define a zone as having dynamic content in one of two ways: - By specifying nets=dynamic in the OPTIONS column of an entry for the zone in /etc/shorewall/interfaces; or - By specifying :dynamic in the HOST(S) column of an entry for the zone in /etc/shorewall/hosts. When there are any dynamic zones present in your configuration, Shorewall (Shorewall-lite) will: a) Execute the following commands during 'shorewall start' or 'shorewall-lite start'. ipset -U :all: :all: ipset -U :all: :default: ipset -F ipset -X ipset -R < ${VARDIR}/ipsets.save where $VARDIR normally contains /var/lib/shorewall (/var/lib/shorewall-lite) but may be modified by /etc/shorewall/vardir (/etc/shorewall-lite/vardir). b) During 'start', 'restart' and 'restore' processing, Shorewall will then attempt to create an ipset named _ for each zone/interface pair that has been specified as dynamic. The type of ipset created is 'iphash' so that only individual IPv4 addresses may be added to the set. c) Execute the following commands during 'shorewall stop' or 'shorewall-lite stop': if ipset -S > ${VARDIR}/ipsets.tmp; then mv -f ${VARDIR}/ipsets.tmp ${VARDIR}/ipsets.save fi The 'shorewall add' and 'shorewall delete' commands are supported with their original syntax: add [:] ... delete [:] ... In addition, the 'show dynamic' command is added that lists the dynamic content of a zone. show dynamic These commands are supported by shorewall-lite as well.