shorewall-hosts
5
hosts
Shorewall file
/etc/shorewall/hosts
Description
This file is used to define zones in terms of subnets and/or
individual IP addresses. Most simple setups don't need to (should not)
place anything in this file.
The order of entries in this file is not significant in determining
zone composition. Rather, the order that the zones are defined in
shorewall-zones(5) determines the order in which the records in this file
are interpreted.
The only time that you need this file is when you have more than
one zone connected through a single interface.
If you have an entry for a zone and interface in
shorewall-interfaces(5) then do not include any entries in this file for
that same (zone, interface) pair.
The columns in the file are as follows.
ZONE —
zone-name
The name of a zone defined in shorewall-zones(5). You may not
list the firewall zone in this column.
HOST(S) —
interface:{[bridge-port:]{address-or-range[,address-or-range]...|+ipset}[exclusion]
The name of an interface defined in the
shorewall-interfaces(5) file followed by a colon (":") and a
comma-separated list whose elements are either:
The IP address of a host.
A network in CIDR format.
An IP address range of the form
low.address-high.address.
Your kernel and iptables must have iprange match support.
A physical bridge-port name; only
allowed when the interface names a bridge created by the
brctl(8) addbr command. This port must not be
defined in shorewall-interfaces(5) and may be optionally
followed by a colon (":") and a host or network IP or a range.
See http://www.shorewall.net/bridge.html
for details. Specifying a physical port name requires that you
have BRIDGING=Yes in shorewall.conf(5).
The name of an ipset.
You may also exclude certain hosts through use of an
exclusion (see shorewall-exclusion(5).
OPTIONS (Optional) — [option[,option]...]
A comma-separated list of options from the following list. The
order in which you list the options is not significant but the list
should have no embedded white space.
maclist
Connection requests from these hosts are compared
against the contents of shorewall-maclist(5). If this option
is specified, the interface must be an ethernet NIC or
equivalent and must be up before Shorewall is started.
routeback
Shorewall should set up the infrastructure to pass
packets from this/these address(es) back to themselves. This
is necessary if hosts in this group use the services of a
transparent proxy that is a member of the group or if DNAT is
used to send requests originating from this group to a server
in the group.
blacklist
This option only makes sense for ports on a
bridge.
Check packets arriving on this port against the
shorewall-blacklist(5) file.
tcpflags
Packets arriving from these hosts are checked for
certain illegal combinations of TCP flags. Packets found to
have such a combination of flags are handled according to the
setting of TCP_FLAGS_DISPOSITION after having been logged
according to the setting of TCP_FLAGS_LOG_LEVEL.
nosmurfs
This option only makes sense for ports on a
bridge.
Filter packets for smurfs (packets with a broadcast
address as the source).
Smurfs will be optionally logged based on the setting of
SMURF_LOG_LEVEL in shorewall.conf(5). After logging, the
packets are dropped.
ipsec
The zone is accessed via a kernel 2.6 ipsec SA. Note
that if the zone named in the ZONE column is specified as an
IPSEC zone in the shorewall-zones(5) file then you do NOT need
to specify the 'ipsec' option here.
FILES
/etc/shorewall/hosts
See ALSO
http://www.shorewall.net/Documentation.htm#Hosts
shorewall(8), shorewall-accounting(5), shorewall-actions(5),
shorewall-blacklist(5), shorewall-interfaces(5), shorewall-ipsec(5),
shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
shorewall-providers(5), shorewall-proxyarp(5), shorewall-route_routes(5),
shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5),
shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)