<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article id="IPIP">
  <articleinfo>
    <title>GRE and IPIP Tunnels</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate>2003-02-22</pubdate>

    <copyright>
      <year>2001</year>

      <year>2002</year>

      <year>2003</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled &#34;<ulink
      url="GnuCopyright.htm">GNU Free Documentation License</ulink>&#34;.</para>
    </legalnotice>
  </articleinfo>

  <warning>
    <para>GRE and IPIP Tunnels are insecure when used over the internet; use
    them at your own risk</para>
  </warning>

  <para>GRE and IPIP tunneling with Shorewall can be used to bridge two
  masqueraded networks.</para>

  <para>The simple scripts described in the <ulink url="http://ds9a.nl/lartc">Linux
  Advanced Routing and Shaping HOWTO</ulink> work fine with Shorewall.
  Shorewall also includes a tunnel script for automating tunnel configuration.
  If you have installed the RPM, the tunnel script may be found in the
  Shorewall documentation directory (usually
  /usr/share/doc/shorewall-&#60;version&#62;/).</para>

  <section>
    <title>Bridging two Masqueraded Networks</title>

    <para>Suppose that we have the following situation:</para>

    <graphic fileref="images/TwoNets1.png" />

    <para>We want systems in the 192.168.1.0/24 subnetwork to be able to
    communicate with the systems in the 10.0.0.0/8 network. This is
    accomplished through use of the /etc/shorewall/tunnels file, the
    /etc/shorewall/policy file and the /etc/shorewall/tunnel script that is
    included with Shorewall.</para>

    <para>The &#39;tunnel&#39; script is not installed in /etc/shorewall by
    default -- If you install using the tarball, the script is included in the
    tarball; if you install using the RPM, the file is in your Shorewall
    documentation directory (normally
    /usr/share/doc/shorewall-&#60;version&#62;).</para>

    <para>In the /etc/shorewall/tunnel script, set the &#39;tunnel_type&#39;
    parameter to the type of tunnel that you want to create.</para>

    <example>
      <title>/etc/shorewall/tunnel</title>

      <programlisting>tunnel_type=gre</programlisting>
    </example>

    <para>On each firewall, you will need to declare a zone to represent the
    remote subnet. We&#39;ll assume that this zone is called &#39;vpn&#39; and
    declare it in /etc/shorewall/zones on both systems as follows.</para>

    <table>
      <title>/etc/shorewall/zones system A &#38; B</title>

      <tgroup cols="3">
        <thead>
          <row>
            <entry align="center">ZONE</entry>

            <entry align="center">DISPLAY</entry>

            <entry align="center">COMMENTS</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>vpn</entry>

            <entry>VPN</entry>

            <entry>Remote Subnet</entry>
          </row>
        </tbody>
      </tgroup>
    </table>

    <para>On system A, the 10.0.0.0/8 will comprise the <emphasis role="bold">vpn</emphasis>
    zone. In /etc/shorewall/interfaces:</para>

    <table>
      <title>/etc/shorewall/interfaces system A</title>

      <tgroup cols="4">
        <thead>
          <row>
            <entry align="center">ZONE</entry>

            <entry align="center">INTERFACE</entry>

            <entry align="center">BROADCAST</entry>

            <entry align="center">OPTIONS</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>vpn</entry>

            <entry>tosysb</entry>

            <entry>10.255.255.255</entry>

            <entry></entry>
          </row>
        </tbody>
      </tgroup>
    </table>

    <para>In /etc/shorewall/tunnels on system A, we need the following:</para>

    <table>
      <title>/etc/shorewall/tunnels system A</title>

      <tgroup cols="4">
        <thead>
          <row>
            <entry align="center">TYPE</entry>

            <entry align="center">ZONE</entry>

            <entry align="center">GATEWAY</entry>

            <entry align="center">GATEWAY ZONE</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>ipip</entry>

            <entry>net</entry>

            <entry>134.28.54.2</entry>

            <entry></entry>
          </row>
        </tbody>
      </tgroup>
    </table>

    <para>This entry in /etc/shorewall/tunnels, opens the firewall so that the
    IP encapsulation protocol (4) will be accepted to/from the remote gateway.</para>

    <para>In the tunnel script on system A:</para>

    <example>
      <title>tunnel script on system A</title>

      <programlisting>tunnel=tosysb
myrealip=206.161.148.9 (for GRE tunnel only)
myip=192.168.1.1
hisip=10.0.0.1
gateway=134.28.54.2
subnet=10.0.0.0/8
</programlisting>
    </example>

    <para>Similarly, On system B the 192.168.1.0/24 subnet will comprise the
    <emphasis role="bold">vpn</emphasis> zone. In /etc/shorewall/interfaces:</para>

    <table>
      <title>/etc/shorewall/interfaces system B</title>

      <tgroup cols="4">
        <thead>
          <row>
            <entry align="center">ZONE</entry>

            <entry align="center">INTERFACE</entry>

            <entry align="center">BROADCAST</entry>

            <entry align="center">OPTIONS</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>vpn</entry>

            <entry>tosysa</entry>

            <entry>192.168.1.255</entry>

            <entry></entry>
          </row>
        </tbody>
      </tgroup>
    </table>

    <para>In /etc/shorewall/tunnels on system B, we have:</para>

    <table>
      <title>/etc/shorewall/tunnels system B</title>

      <tgroup cols="4">
        <thead>
          <row>
            <entry align="center">TYPE</entry>

            <entry align="center">ZONE</entry>

            <entry align="center">GATEWAY</entry>

            <entry align="center">GATEWAY ZONE</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>ipip</entry>

            <entry>net</entry>

            <entry>206.191.148.9</entry>

            <entry></entry>
          </row>
        </tbody>
      </tgroup>
    </table>

    <para>And in the tunnel script on system B:</para>

    <example>
      <title>tunnel script on system B</title>

      <programlisting>tunnel=tosysa
myrealip=134.28.54.2 (for GRE tunnel only)
myip=10.0.0.1
hisip=192.168.1.1
gateway=206.191.148.9
subnet=192.168.1.0/24</programlisting>
    </example>

    <para>You can rename the modified tunnel scripts if you like; be sure that
    they are secured so that root can execute them.</para>

    <para>You will need to allow traffic between the &#34;vpn&#34; zone and
    the &#34;loc&#34; zone on both systems -- if you simply want to admit all
    traffic in both directions, you can use the policy file:</para>

    <table>
      <title>/etc/shorewall/policy system A &#38; B</title>

      <tgroup cols="4">
        <thead>
          <row>
            <entry align="center">SOURCE</entry>

            <entry align="center">DEST</entry>

            <entry align="center">POLICY</entry>

            <entry align="center">LOG LEVEL</entry>
          </row>
        </thead>

        <tbody>
          <row>
            <entry>loc</entry>

            <entry>vpn</entry>

            <entry>ACCEPT</entry>

            <entry></entry>
          </row>

          <row>
            <entry>vpn</entry>

            <entry>loc</entry>

            <entry>ACCEPT</entry>

            <entry></entry>
          </row>
        </tbody>
      </tgroup>
    </table>

    <para>On both systems, restart Shorewall and run the modified tunnel
    script with the &#34;start&#34; argument on each system. The systems in
    the two masqueraded subnetworks can now talk to each other</para>
  </section>
</article>