Shorewall Errata/Upgrade Issues |
IMPORTANT
If you use a Windows system to download a corrected script, be sure to run the script through dos2unix after you have moved it to your Linux system.
If you are installing Shorewall for the first time and plan to use the .tgz and install.sh script, you can untar the archive, replace the 'firewall' script in the untarred directory with the one you downloaded below, and then run install.sh.
When the instructions say to install a corrected firewall script in /usr/share/shorewall/firewall, you may rename the existing file before copying in the new file.
DO NOT INSTALL CORRECTED COMPONENTS
ON A RELEASE EARLIER THAN THE ONE THAT THEY ARE LISTED UNDER BELOW.
For example, do NOT install the 1.3.9a firewall script if you are running
1.3.7c.
The upgrade issues have moved to a separate page.
There are a couple of serious bugs in iptables 1.2.3 that prevent it from working with Shorewall. Regrettably, RedHat released this buggy iptables in RedHat 7.2.
I have built a corrected 1.2.3 rpm which you can download here and I have also built an iptables-1.2.4 rpm which you can download here. If you are currently running RedHat 7.1, you can install either of these RPMs before you upgrade to RedHat 7.2.
Update 11/9/2001: RedHat has released an iptables-1.2.4 RPM of their own which you can download from http://www.redhat.com/support/errata/RHSA-2001-144.html. I have installed this RPM on my firewall and it works fine.
If you would like to patch iptables 1.2.3 yourself, the patches are available for download. This patch which corrects a problem with parsing of the --log-level specification while this patch corrects a problem in handling the TOS target.
To install one of the above patches:
- cd iptables-1.2.3/extensions
- patch -p0 < the-patch-file
Users who use RedHat iptables RPMs and who upgrade to kernel 2.4.18/19 may experience the following:
# shorewall start
Processing /etc/shorewall/shorewall.conf ...
Processing /etc/shorewall/params ...
Starting Shorewall...
Loading Modules...
Initializing...
Determining Zones...
Zones: net
Validating interfaces file...
Validating hosts file...
Determining Hosts in Zones...
Net Zone: eth0:0.0.0.0/0
iptables: libiptc/libip4tc.c:380: do_check: Assertion
`h->info.valid_hooks == (1 << 0 | 1 << 3)' failed.
Aborted (core dumped)
iptables: libiptc/libip4tc.c:380: do_check: Assertion
`h->info.valid_hooks == (1 << 0 | 1 << 3)' failed.
Aborted (core dumped)The RedHat iptables RPM is compiled with debugging enabled but the user-space debugging code was not updated to reflect recent changes in the Netfilter 'mangle' table. You can correct the problem by installing this iptables RPM. If you are already running a 1.2.5 version of iptables, you will need to specify the --oldpackage option to rpm (e.g., "iptables -Uvh --oldpackage iptables-1.2.5-1.i386.rpm").
If you find that rpm complains about a conflict with kernel <= 2.2 yet you have a 2.4 kernel installed, simply use the "--nodeps" option to rpm.
Installing: rpm -ivh --nodeps <shorewall rpm>
Upgrading: rpm -Uvh --nodeps <shorewall rpm>
The iptables 1.2.7 release of iptables has made an incompatible change to the syntax used to specify multiport match rules; as a consequence, if you install iptables 1.2.7 you must be running Shorewall 1.3.7a or later or:
#EXTERNAL INTERFACE INTERNAL ALL INTERFACES LOCALError message is:
192.0.2.22 eth0 192.168.9.22 yes yes
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
Setting up NAT...The solution is to put "no" in the LOCAL column. Kernel support for LOCAL=yes has never worked properly and 2.4.18-10 has disabled it. The 2.4.19 kernel contains corrected support under a new kernel configuraiton option; see http://www.shorewall.net/Documentation.htm#NAT
iptables: Invalid argument
Terminated
Last updated 3/21/2003 - Tom Eastep
Copyright © 2001, 2002, 2003 Thomas M. Eastep.