auto br0 iface br0 inet static address 192.168.1.253 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 pre-up /sbin/ip link set eth0 up pre-up /sbin/ip link set eth1 up pre-up /usr/sbin/brctl addbr br0 pre-up /usr/sbin/brctl addif br0 eth0 pre-up /usr/sbin/brctl addif br0 eth1

BOOTPROTO='dhcp' REMOTE_IPADDR='' STARTMODE='onboot' UNIQUE='3hqH.MjuOqWfSZ+C' WIRELESS='no' MTU=''

DEVICE=br0 BOOTPROTO=dhcp ONBOOT=yes

/etc/sysconfig/network/ifcfg-br0 BOOTPROTO='dhcp' REMOTE_IPADDR='' STARTMODE='onboot' UNIQUE='3hqH.MjuOqWfSZ+C' WIRELESS='no' MTU='' /etc/init.d/bridge#!/bin/sh ################################################################################ # Script to create a bridge # # (c) 2004 - Tom Eastep (teastep@shorewall.net) # # Modify the following variables to match your configuration # #### BEGIN INIT INFO # Provides: bridge # Required-Start: coldplug # Required-Stop: # Default-Start: 2 3 5 # Default-Stop: 0 1 6 # Description: starts and stops a bridge ### END INIT INFO # # chkconfig: 2345 05 89 # description: GRE/IP Tunnel # ################################################################################ PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin INTERFACES="eth1 eth0" BRIDGE="br0" MODULES="tulip" do_stop() { echo "Stopping Bridge $BRIDGE" brctl delbr $BRIDGE for interface in $INTERFACES; do ip link set $interface down done } do_start() { echo "Starting Bridge $BRIDGE" for module in $MODULES; do modprobe $module done sleep 5 for interface in $INTERFACES; do ip link set $interface up done brctl addbr $BRIDGE for interface in $INTERFACES; do brctl addif $BRIDGE $interface done } case "$1" in start) do_start ;; stop) do_stop ;; restart) do_stop sleep 1 do_start ;; *) echo "Usage: $0 {start|stop|restart}" exit 1 esac exit 0

/etc/sysconfig/network-scripts/ifcfg-br0: DEVICE=br0 TYPE=Bridge IPADDR=192.168.50.14 NETMASK=255.255.255.0 ONBOOT=yes /etc/sysconfig/network-scripts/ifcfg-eth0:DEVICE=eth0 TYPE=ETHER BRIDGE=br0 ONBOOT=yes/etc/sysconfig/network-scripts/ifcfg-eth1:DEVICE=eth1 TYPE=ETHER BRIDGE=br0 ONBOOT=yes

#!/bin/sh # chkconfig: 2345 05 89 # description: Layer 2 Bridge # [ -f /etc/sysconfig/bridge ] && . /etc/sysconfig/bridge PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin do_stop() { echo "Stopping Bridge" for i in $INTERFACES $BRIDGE_INTERFACE ; do ip link set $i down done brctl delbr $BRIDGE_INTERFACE } do_start() { echo "Starting Bridge" for i in $INTERFACES ; do ip link set $i up done brctl addbr br0 for i in $INTERFACES ; do ip link set $i up brctl addif br0 $i done ifup $BRIDGE_INTERFACE } case "$1" in start) do_start ;; stop) do_stop ;; restart) do_stop sleep 1 do_start ;; *) echo "Usage: $0 {start|stop|restart}" exit 1 esac exit 0 Le fichier /etc/sysconfig/bridge: BRIDGE_INTERFACE=br0 #The name of your Bridge INTERFACES="eth0 eth1" #The physical interfaces to be bridged

Here is how I configured bridge in Slackware: 1) I had to compile bridge-utils (It's not in the standard distribution) 2) I've created rc.bridge in /etc/rc.d: ######################### #! /bin/sh ifconfig eth0 0.0.0.0 ifconfig eth1 0.0.0.0 #ifconfig lo 127.0.0.1 #this line should be uncommented if you don't use rc.inet1 brctl addbr most brctl addif most eth0 brctl addif most eth1 ifconfig most 192.168.1.31 netmask 255.255.255.0 up #route add default gw 192.168.1.1 metric 1 #this line should be uncommented if #you don't use rc.inet1 ######################### 3) I made rc.brige executable and added the following line to /etc/rc.d/rc.local /etc/rc.d/rc.bridge

Bridge Setup for Gentoo #install bridge-utils emerge bridge-utils ## create a link for net.br0 cd /etc/init.d ln -s net.eth0 net.br0 # Remove net.eth*, add net.br0 and bridge. rc-update del net.eth0 rc-update del net.eth1 rc-update add net.br0 default rc-update add bridge boot /etc/conf.d/bridge: #bridge contains the name of each bridge you want created. bridge="br0" # bridge_<bridge>_devices contains the devices to use at bridge startup. bridge_br0_devices="eth0 eth1" /etc/conf.d/net iface_br0="10.0.0.1 broadcast 10.0.0.255 netmask 255.255.255.0" #for dhcp: #iface_br0="dhcp" #comment this out if you use dhcp. gateway="eth0/10.0.0.1"