Shorewall and OpenVZTomEastep2009Thomas M. EastepPermission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
GNU Free Documentation
License.IntroductionOpen Virtuoso (OpenVZ)
is an open source kernel-based virtualization solution from
Parallels (formerly
SWSoft). Virtual servers take the form of
containers (the OpenVZ documentation calls these
Virtual Environments or VEs)
which are created via templates. Templates are
available for a wide variety of distributions and architectures.OpenVZ requires a patched kernel. Beginning with Lenny,
Debian supplies OpenVZ kernels through the standard
stable repository.Shorewall on an OpenVZ HostAs with any Shorewall installation involving other software, we
suggest that you first install OpenVZ and get it working before attempting
to add Shorewall. Alternatively, execute shorewall
clear while installing and
configuring OpenVZ.NetworkingThe default OpenVZ networking configuration uses Proxy ARP. You
assign containers IP addresses in the IP network from one of your
interfaces and you are expected to set the proxy_arp flag on that
interface
(/proc/sys/net/ipv4/conf/interface/proxy_arp).OpenVZ creates a point-to-point virtual interface in the host with
a rather odd configuration.Example (Single VE with IP address 206.124.146.178):gateway:~# ip addr ls dev venet0
10: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/void
gateway:~# ip route ls dev venet0
206.124.146.178 scope link
gateway:~# The interface has no IP configuration yet it has a route to
206.124.146.178!From within the VE with IP address 206.124.146.178, we have the
following:server:~ # ip addr ls
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/void
inet 127.0.0.1/32 scope host venet0
inet 206.124.146.178/32 scope global venet0:0
server:~ # ip route ls
192.0.2.0/24 dev venet0 scope link
127.0.0.0/8 dev lo scope link
default via 192.0.2.1 dev venet0
server:~ # There are a couple of unique features of this
configuration:127.0.0.1/32 is configured on venet0 although the main routing
table routes loopback traffic through the lo interface as normal.There is a route to 192.0.2.0/24 through venet0 even though
the interface has no IP address in that network. Note: 192.0.2.0/24
is reserved for use in documentation and for testing.The default route is via 192.0.2.1 yet there is no interface
on the host with that IP address.All of this doesn't really affect the Shorewall configuration but
it is interesting none the less.Shorewall ConfigurationWe recommend handlintg the strange OpenVZ configuration in
Shorewall as follows:/etc/shorewall/zones:###############################################################################
#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
net ipv4
vz ipv4/etc/shorewall/interfaces:###############################################################################
#ZONE INTERFACE BROADCAST OPTIONS
net eth0 - proxyarp=1
vz venet0 - routeback,rp_filter=0Multi-ISPIf you run Shorewall Multi-ISP support on the host, you should
arrange for traffic to your containers to use the main routing table. In
the configuration shown here, this entry in /etc/shorewall/route_rules
is appropriate:#SOURCE DEST PROVIDER PRIORITY
- 206.124.146.178 main 1000RFC 1918 Addresses in a ContainerYou can assign an RFC 1918 address to a VE and use masquerade/SNAT
to provide Internet access to the container. This is just a normal
simple Shorewall configuration as shown in the Two-interface Quick Start Guide. In this
configuration the firewall's internal interface is venet0. Be sure to include the options
shown above.Shorewall in an OpenVZ Virtual EnvironmentIf you have obtained an OpenVZ VE from a hosting service provider,
you may find it difficult to configure any type of firewall within your
VE. There are two VE parameters that control iptables behavior within the
container:--iptables name Restrict access to iptables modules inside a container (The
OpenVZ claims that by default all iptables modules that are loaded
in the host system are accessible inside a container; I haven't
tried that).You can use the following values for
name: ,
, ,
, ,
, ,
, ,
, ,
, ,
,
, ,
, ,
, ,
, ,
, .If your provider is using this option, you may be in deep
trouble trying to use Shorewall in your container. Look at the
output of shorewall show capabilities and weep.
Then try to get your provider to remove this restriction on your
container.--numiptent numThis parameter limits the number of iptables rules that are
allowed within the container. The default is 100 which is too small
for a Shorewall configuration. We recommend setting this to at least
200.if you see annoying error messages as shown below during
start/restart, remove the module-init-tools package.server:/etc/shorewall # shorewall restart
Compiling...
Compiling /etc/shorewall/zones...
Compiling /etc/shorewall/interfaces...
Determining Hosts in Zones...
Preprocessing Action Files...
Pre-processing /usr/share/shorewall/action.Drop...
Pre-processing /usr/share/shorewall/action.Reject...
Compiling /etc/shorewall/policy...
Adding Anti-smurf Rules
Adding rules for DHCP
Compiling TCP Flags filtering...
Compiling Kernel Route Filtering...
Compiling Martian Logging...
Compiling MAC Filtration -- Phase 1...
Compiling /etc/shorewall/rules...
Generating Transitive Closure of Used-action List...
Processing /usr/share/shorewall/action.Reject for chain Reject...
Processing /usr/share/shorewall/action.Drop for chain Drop...
Compiling MAC Filtration -- Phase 2...
Applying Policies...
Generating Rule Matrix...
Creating iptables-restore input...
Compiling iptables-restore input for chain mangle:...
Compiling /etc/shorewall/routestopped...
Shorewall configuration compiled to /var/lib/shorewall/.restart
Restarting Shorewall....
Initializing...
Processing /etc/shorewall/init ...
Processing /etc/shorewall/tcclear ...
Setting up Route Filtering...
Setting up Martian Logging...
Setting up Proxy ARP...
Setting up Traffic Control...
Preparing iptables-restore input...
Running /usr/sbin/iptables-restore...
FATAL: Could not load /lib/modules/2.6.26-2-openvz-amd64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.26-2-openvz-amd64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.26-2-openvz-amd64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.26-2-openvz-amd64/modules.dep: No such file or directory
IPv4 Forwarding Enabled
Processing /etc/shorewall/start ...
Processing /etc/shorewall/started ...
done.
Working ExampleThis section presents a working example. This is the configuration
at shorewall.net during the summer of 2009.The network diagram is shown below.The two systems shown in the green box are OpenVZ Virtual
Environments (containers).OpenVZ ConfigurationIn the files below, items in bold
font are relevant to the networking/Shorewall
configuration./etc/vz/conf (long lines folded for
clarity).## Global parameters
VIRTUOZZO=yes
LOCKDIR=/var/lib/vz/lock
DUMPDIR=/var/lib/vz/dump
VE0CPUUNITS=1000
## Logging parameters
LOGGING=yes
LOGFILE=/var/log/vzctl.log
LOG_LEVEL=0
VERBOSE=0
## Disk quota parameters
DISK_QUOTA=no
VZFASTBOOT=no
# The name of the device whose ip address will be used as source ip for VE.
# By default automatically assigned.
VE_ROUTE_SRC_DEV="eth3"
# Controls which interfaces to send ARP requests and modify APR tables on.
NEIGHBOUR_DEVS=detect
## Template parameters
TEMPLATE=/var/lib/vz/template
## Defaults for VEs
VE_ROOT=/home/vz/root/$VEID
VE_PRIVATE=/home/vz/private/$VEID
CONFIGFILE="vps.basic"
#DEF_OSTEMPLATE="fedora-core-4"
DEF_OSTEMPLATE="debian"
## Load vzwdog module
VZWDOG="no"
## IPv4 iptables kernel modules
IPTABLES="iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos
ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length
ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_conntrack
ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc ipt_REDIRECT
xt_mac ipt_owner"
## Enable IPv6
IPV6="no"/etc/vz/conf/101.conf:ONBOOT="yes"
# UBC parameters (in form of barrier:limit)
KMEMSIZE="574890800:589781600"
LOCKEDPAGES="256:256"
PRIVVMPAGES="1073741824:2137483648"
SHMPAGES="21504:21504"
NUMPROC="240:240"
PHYSPAGES="0:9223372036854775807"
VMGUARPAGES="262144:9223372036854775807"
OOMGUARPAGES="26112:9223372036854775807"
NUMTCPSOCK="360:360"
NUMFLOCK="188:206"
NUMPTY="16:16"
NUMSIGINFO="256:256"
TCPSNDBUF="1720320:2703360"
TCPRCVBUF="1720320:2703360"
OTHERSOCKBUF="1126080:2097152"
DGRAMRCVBUF="262144:262144"
NUMOTHERSOCK="360:360"
DCACHESIZE="3409920:3624960"
NUMFILE="9312:9312"
AVNUMPROC="180:180"
NUMIPTENT="200:200"
# Disk quota parameters (in form of softlimit:hardlimit)
DISKSPACE="1048576:1153024"
DISKINODES="200000:220000"
QUOTATIME="0"
# CPU fair sheduler parameter
CPUUNITS="1000"
VE_ROOT="/home/vz/root/$VEID"
VE_PRIVATE="/home/vz/private/$VEID"
OSTEMPLATE="suse-11.1-x86_64"
ORIGIN_SAMPLE="vps.basic"
HOSTNAME="lists.shorewall.net"
IP_ADDRESS="206.124.146.177"
NAMESERVER="127.0.0.1"
NAME="lists"
SEARCHDOMAIN="shorewall.net"This VE is the main server at shorewall.net. Note that some of the
memory parameters are set ridiculously large -- I got tired of
out-of-memory issues./etc/vz/conf/102.conf (nearly default
configuration on Debian):ONBOOT="yes"
# UBC parameters (in form of barrier:limit)
KMEMSIZE="14372700:14790164"
LOCKEDPAGES="256:256"
PRIVVMPAGES="65536:69632"
SHMPAGES="21504:21504"
NUMPROC="240:240"
PHYSPAGES="0:9223372036854775807"
VMGUARPAGES="33792:9223372036854775807"
OOMGUARPAGES="26112:9223372036854775807"
NUMTCPSOCK="360:360"
NUMFLOCK="188:206"
NUMPTY="16:16"
NUMSIGINFO="256:256"
TCPSNDBUF="1720320:2703360"
TCPRCVBUF="1720320:2703360"
OTHERSOCKBUF="1126080:2097152"
DGRAMRCVBUF="262144:262144"
NUMOTHERSOCK="360:360"
DCACHESIZE="3409920:3624960"
NUMFILE="9312:9312"
AVNUMPROC="180:180"
NUMIPTENT="200:200"
# Disk quota parameters (in form of softlimit:hardlimit)
DISKSPACE="1048576:1153024"
DISKINODES="200000:220000"
QUOTATIME="0"
# CPU fair sheduler parameter
CPUUNITS="1000"
VE_ROOT="/home/vz/root/$VEID"
VE_PRIVATE="/home/vz/private/$VEID"
OSTEMPLATE="debian-5.0-amd64-minimal"
ORIGIN_SAMPLE="vps.basic"
HOSTNAME="server.shorewall.net"
IP_ADDRESS="206.124.146.178"
NAMESERVER="206.124.146.177"
NAME="server"I really don't use this server for anything currently but I'm
planning to eventually splt the services between the two VEs.Shorewall Configuration on the HostBelow are exerpts from the configuration files as they pertain to
the OpenVZ environment./etc/shorewall/zones:#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
fw firewall
net ipv4 #Internet
loc ipv4 #Local wired Zone
dmz ipv4 #DMZ
.../etc/shorewall/params:NET_IF=eth3
INT_IF=eth1
VPS_IF=venet0
.../etc/shorewall/interfaces:#ZONE INTERFACE BROADCAST OPTIONS
net $NET_IF detect dhcp,blacklist,tcpflags,optional,routefilter=0,nosmurfs,logmartions=0,proxyarp=1
loc $INT_IF detect dhcp,logmartians=1,routefilter=1,nets=(172.20.1.0/24),tcpflags
dmz $VPS_IF detect logmartians=1,routefilter=0,nets=(206.124.146.177,206.124.146.178),routeback
...This is a multi-ISP configuration so entries are required
in /etc/shorewall/route_rules:#SOURCE DEST PROVIDER PRIORITY
- 172.20.0.0/24 main 1000
- 206.124.146.177 main 1001
- 206.124.146.178 main 1001Shorewall Configuration on ServerI have set up Shorewall on Server (206.124.146.178) just to have
an environment to test with. It is a quite vanilla one-interface
configuration./etc/shorewall/zones:#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
fw firewall
net ipv4/etc/shorewall/interfaces:#ZONE INTERFACE BROADCAST OPTIONS
net venet0 detect dhcp,tcpflags,logmartians,nosmurfs