--- ../Shorewall-common/lib.base 2007-07-02 15:50:32.000000000 -0700 +++ prog.header 2007-07-02 16:50:14.000000000 -0700 @@ -1,48 +1,29 @@ #!/bin/sh # -# Shorewall 4.0 -- /usr/share/shorewall/lib.base +# Generated by the Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.0 # # This program is under GPL [http://www.gnu.org/copyleft/gpl.htm] # -# (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007 - Tom Eastep (teastep@shorewall.net) +# (c) 2006,2007 - Tom Eastep (teastep@shorewall.net) # -# Complete documentation is available at http://shorewall.net # -# This program is free software; you can redistribute it and/or modify -# it under the terms of Version 2 of the GNU General Public License -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA -# -# This library contains the code common to all Shorewall components. -# -# - It is copied into the compiled script with the -e compiler flag is specified to -# shorewall-shell. -# - It is loaded by /sbin/shorewall. -# - It is loaded by /usr/share/shorewall/firewall. -# - It is loaded by /usr/share/shorewall-shell/compiler. -# - It is released as part of Shorewall Lite where it is used by /sbin/shorewall-lite -# and /usr/share/shorewall-lite/shorecap. -# - It is released as part of Shorewall Perl where it is copied into the compiled script -# by the compiler. -# - -SHOREWALL_LIBVERSION=40000 -SHOREWALL_CAPVERSION=30405 - -[ -n "${VARDIR:=/var/lib/shorewall}" ] -[ -n "${SHAREDIR:=/usr/share/shorewall}" ] -[ -n "${CONFDIR:=/etc/shorewall}" ] -SHELLSHAREDIR=/usr/share/shorewall-shell -PERLSHAREDIR=/usr/share/shorewall-perl - +# Options are: +# +# -n Don't alter Routing +# -v and -q Standard Shorewall Verbosity control +# +# Commands are: +# +# start Starts the firewall +# refresh Refresh the firewall +# restart Restarts the firewall +# reload Reload the firewall +# clear Removes all firewall rules +# stop Stops the firewall +# status Displays firewall status +# version Displays the version of Shorewall that +# generated this program +# # # Message to stderr # @@ -111,20 +92,6 @@ } # -# Undo the effect of 'separate_list()' -# -combine_list() -{ - local f o= - - for f in $* ; do - o="${o:+$o,}$f" - done - - echo $o -} - -# # Suppress all output for a command # qt() @@ -310,83 +277,6 @@ } # -# Call this function to assert mutual exclusion with Shorewall. If you invoke the -# /sbin/shorewall program while holding mutual exclusion, you should pass "nolock" as -# the first argument. Example "shorewall nolock refresh" -# -# This function uses the lockfile utility from procmail if it exists. -# Otherwise, it uses a somewhat race-prone algorithm to attempt to simulate the -# behavior of lockfile. -# -mutex_on() -{ - local try=0 - local lockf=${LOCKFILE:=${VARDIR}/lock} - - MUTEX_TIMEOUT=${MUTEX_TIMEOUT:-60} - - if [ $MUTEX_TIMEOUT -gt 0 ]; then - - [ -d ${VARDIR} ] || mkdir -p ${VARDIR} - - if qt mywhich lockfile; then - lockfile -${MUTEX_TIMEOUT} -r1 ${lockf} - else - while [ -f ${lockf} -a ${try} -lt ${MUTEX_TIMEOUT} ] ; do - sleep 1 - try=$((${try} + 1)) - done - - if [ ${try} -lt ${MUTEX_TIMEOUT} ] ; then - # Create the lockfile - echo $$ > ${lockf} - else - echo "Giving up on lock file ${lockf}" >&2 - fi - fi - fi -} - -# -# Call this function to release mutual exclusion -# -mutex_off() -{ - rm -f ${LOCKFILE:=${VARDIR}/lock} -} - -# -# Load an optional library -# -lib_load() # $1 = Name of the Library, $2 = Error Message heading if the library cannot be found -{ - local lib=${SHAREDIR}/lib.$1 - local loaded - - eval loaded=\$LIB_${1}_LOADED - - if [ -z "$loaded" ]; then - [ -f $lib ] || lib=${SHELLSHAREDIR}/lib.$1 - - if [ -f $lib ]; then - progress_message "Loading library $lib..." - . $lib - eval LIB_${1}_LOADED=Yes - else - startup_error "$2 requires the Shorewall library $1 ($lib) which is not installed" - fi - fi -} - -# -# Determine if an optional library is available -# -lib_avail() # $1 = Name of the Library -{ - [ -f ${SHAREDIR}/lib.$1 ] -} - -# # Note: The following set of IP address manipulation functions have anomalous # behavior when the shell only supports 32-bit signed arithmatic and # the IP address is 128.0.0.0 or 128.0.0.1. @@ -607,40 +497,6 @@ fi } - -# -# Chain name base for an interface -- replace all periods with underscores in the passed name. -# The result is echoed (less trailing "+"). -# -chain_base() #$1 = interface -{ - local c=${1%%+} - - while true; do - case $c in - @*) - c=at_${c#@} - ;; - *.*) - c="${c%.*}_${c##*.}" - ;; - *-*) - c="${c%-*}_${c##*-}" - ;; - *%*) - c="${c%\%*}_${c##*%}" - ;; - *@*) - c="${c%@*}_${c##*@}" - ;; - *) - echo ${c:=common} - return - ;; - esac - done -} - # # Query NetFilter about the existence of a filter chain # @@ -879,21 +735,6 @@ } # -# Set default config path -# -ensure_config_path() { - local F=${SHAREDIR}/configpath - if [ -z "$CONFIG_PATH" ]; then - [ -f $F ] || { echo " ERROR: $F does not exist"; exit 2; } - . $F - fi - - if [ -n "$SHOREWALL_DIR" ]; then - [ "${CONFIG_PATH%%:*}" = "$SHOREWALL_DIR" ] || CONFIG_PATH=$SHOREWALL_DIR:$CONFIG_PATH - fi -} - -# # Find a File -- For relative file name, look in each ${CONFIG_PATH} then ${CONFDIR} # find_file() @@ -918,54 +759,6 @@ } # -# Get fully-qualified name of file -# -resolve_file() # $1 = file name -{ - local pwd=$PWD - - case $1 in - /*) - echo $1 - ;; - .) - echo $pwd - ;; - ./*) - echo ${pwd}${1#.} - ;; - ..) - cd .. - echo $PWD - cd $pwd - ;; - ../*) - cd .. - resolve_file ${1#../} - cd $pwd - ;; - *) - echo $pwd/$1 - ;; - esac -} - -# -# Perform variable substitution on the passed argument and echo the result -# -expand() # $@ = contents of variable which may be the name of another variable -{ - eval echo \"$@\" -} - -# -# Function for including one file into another -# -INCLUDE() { - . $(find_file $(expand $@)) -} - -# # Set the Shorewall state # set_state () # $1 = state @@ -974,200 +767,6 @@ } # -# Determine which optional facilities are supported by iptables/netfilter -# -determine_capabilities() { - qt $IPTABLES -t nat -L -n && NAT_ENABLED=Yes || NAT_ENABLED= - qt $IPTABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED= - - CONNTRACK_MATCH= - MULTIPORT= - XMULTIPORT= - POLICY_MATCH= - PHYSDEV_MATCH= - IPRANGE_MATCH= - RECENT_MATCH= - OWNER_MATCH= - IPSET_MATCH= - CONNMARK= - XCONNMARK= - CONNMARK_MATCH= - XCONNMARK_MATCH= - RAW_TABLE= - IPP2P_MATCH= - LENGTH_MATCH= - CLASSIFY_TARGET= - ENHANCED_REJECT= - USEPKTTYPE= - KLUDGEFREE= - MARK= - XMARK= - MANGLE_FORWARD= - COMMENTS= - ADDRTYPE= - TCPMSS_MATCH= - - qt $IPTABLES -N fooX1234 - qt $IPTABLES -A fooX1234 -m conntrack --ctorigdst 192.168.1.1 -j ACCEPT && CONNTRACK_MATCH=Yes - qt $IPTABLES -A fooX1234 -p tcp -m multiport --dports 21,22 -j ACCEPT && MULTIPORT=Yes - qt $IPTABLES -A fooX1234 -p tcp -m multiport --dports 21:22 -j ACCEPT && XMULTIPORT=Yes - qt $IPTABLES -A fooX1234 -m policy --pol ipsec --mode tunnel --dir in -j ACCEPT && POLICY_MATCH=Yes - - if qt $IPTABLES -A fooX1234 -m physdev --physdev-out eth0 -j ACCEPT; then - PHYSDEV_MATCH=Yes - fi - - if qt $IPTABLES -A fooX1234 -m iprange --src-range 192.168.1.5-192.168.1.124 -j ACCEPT; then - IPRANGE_MATCH=Yes - if [ -z "${KLUDGEFREE}" ]; then - qt $IPTABLES -A fooX1234 -m iprange --src-range 192.168.1.5-192.168.1.124 -m iprange --dst-range 192.168.1.5-192.168.1.124 -j ACCEPT && KLUDGEFREE=Yes - fi - fi - - qt $IPTABLES -A fooX1234 -m recent --update -j ACCEPT && RECENT_MATCH=Yes - qt $IPTABLES -A fooX1234 -m owner --uid-owner 0 -j ACCEPT && OWNER_MATCH=Yes - - if qt $IPTABLES -A fooX1234 -m connmark --mark 2 -j ACCEPT; then - CONNMARK_MATCH=Yes - qt $IPTABLES -A fooX1234 -m connmark --mark 2/0xFF -j ACCEPT && XCONNMARK_MATCH=Yes - fi - - qt $IPTABLES -A fooX1234 -p tcp -m ipp2p --ipp2p -j ACCEPT && IPP2P_MATCH=Yes - qt $IPTABLES -A fooX1234 -m length --length 10:20 -j ACCEPT && LENGTH_MATCH=Yes - qt $IPTABLES -A fooX1234 -j REJECT --reject-with icmp-host-prohibited && ENHANCED_REJECT=Yes - - qt $IPTABLES -A fooX1234 -j ACCEPT -m comment --comment "This is a comment" && COMMENTS=Yes - - if [ -n "$MANGLE_ENABLED" ]; then - qt $IPTABLES -t mangle -N fooX1234 - - if qt $IPTABLES -t mangle -A fooX1234 -j MARK --set-mark 1; then - MARK=Yes - qt $IPTABLES -t mangle -A fooX1234 -j MARK --and-mark 0xFF && XMARK=Yes - fi - - if qt $IPTABLES -t mangle -A fooX1234 -j CONNMARK --save-mark; then - CONNMARK=Yes - qt $IPTABLES -t mangle -A fooX1234 -j CONNMARK --save-mark --mask 0xFF && XCONNMARK=Yes - fi - - qt $IPTABLES -t mangle -A fooX1234 -j CLASSIFY --set-class 1:1 && CLASSIFY_TARGET=Yes - qt $IPTABLES -t mangle -F fooX1234 - qt $IPTABLES -t mangle -X fooX1234 - qt $IPTABLES -t mangle -L FORWARD -n && MANGLE_FORWARD=Yes - fi - - qt $IPTABLES -t raw -L -n && RAW_TABLE=Yes - - if qt mywhich ipset; then - qt ipset -X fooX1234 # Just in case something went wrong the last time - - if qt ipset -N fooX1234 iphash ; then - if qt $IPTABLES -A fooX1234 -m set --set fooX1234 src -j ACCEPT; then - qt $IPTABLES -D fooX1234 -m set --set fooX1234 src -j ACCEPT - IPSET_MATCH=Yes - fi - qt ipset -X fooX1234 - fi - fi - - qt $IPTABLES -A fooX1234 -m pkttype --pkt-type broadcast -j ACCEPT && USEPKTTYPE=Yes - qt $IPTABLES -A fooX1234 -m addrtype --src-type BROADCAST -j ACCEPT && ADDRTYPE=Yes - qt $IPTABLES -A fooX1234 -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT && TCPMSS_MATCH=Yes - - qt $IPTABLES -F fooX1234 - qt $IPTABLES -X fooX1234 - - CAPVERSION=$SHOREWALL_CAPVERSION -} - -report_capabilities() { - report_capability() # $1 = Capability Description , $2 Capability Setting (if any) - { - local setting= - - [ "x$2" = "xYes" ] && setting="Available" || setting="Not available" - - echo " " $1: $setting - } - - if [ $VERBOSE -gt 1 ]; then - echo "Shorewall has detected the following iptables/netfilter capabilities:" - report_capability "NAT" $NAT_ENABLED - report_capability "Packet Mangling" $MANGLE_ENABLED - report_capability "Multi-port Match" $MULTIPORT - [ -n "$MULTIPORT" ] && report_capability "Extended Multi-port Match" $XMULTIPORT - report_capability "Connection Tracking Match" $CONNTRACK_MATCH - report_capability "Packet Type Match" $USEPKTTYPE - report_capability "Policy Match" $POLICY_MATCH - report_capability "Physdev Match" $PHYSDEV_MATCH - report_capability "Packet length Match" $LENGTH_MATCH - report_capability "IP range Match" $IPRANGE_MATCH - report_capability "Recent Match" $RECENT_MATCH - report_capability "Owner Match" $OWNER_MATCH - report_capability "Ipset Match" $IPSET_MATCH - report_capability "CONNMARK Target" $CONNMARK - [ -n "$CONNMARK" ] && report_capability "Extended CONNMARK Target" $XCONNMARK - report_capability "Connmark Match" $CONNMARK_MATCH - [ -n "$CONNMARK_MATCH" ] && report_capability "Extended Connmark Match" $XCONNMARK_MATCH - report_capability "Raw Table" $RAW_TABLE - report_capability "IPP2P Match" $IPP2P_MATCH - report_capability "CLASSIFY Target" $CLASSIFY_TARGET - report_capability "Extended REJECT" $ENHANCED_REJECT - report_capability "Repeat match" $KLUDGEFREE - report_capability "MARK Target" $MARK - [ -n "$MARK" ] && report_capability "Extended MARK Target" $XMARK - report_capability "Mangle FORWARD Chain" $MANGLE_FORWARD - report_capability "Comments" $COMMENTS - report_capability "Address Type Match" $ADDRTYPE - report_capability "TCPMSS Match" $TCPMSS_MATCH - fi - - [ -n "$PKTTYPE" ] || USEPKTTYPE= - -} - -report_capabilities1() { - report_capability1() # $1 = Capability - { - eval echo $1=\$$1 - } - - echo "#" - echo "# Shorewall $VERSION detected the following iptables/netfilter capabilities - $(date)" - echo "#" - report_capability1 NAT_ENABLED - report_capability1 MANGLE_ENABLED - report_capability1 MULTIPORT - report_capability1 XMULTIPORT - report_capability1 CONNTRACK_MATCH - report_capability1 USEPKTTYPE - report_capability1 POLICY_MATCH - report_capability1 PHYSDEV_MATCH - report_capability1 LENGTH_MATCH - report_capability1 IPRANGE_MATCH - report_capability1 RECENT_MATCH - report_capability1 OWNER_MATCH - report_capability1 IPSET_MATCH - report_capability1 CONNMARK - report_capability1 XCONNMARK - report_capability1 CONNMARK_MATCH - report_capability1 XCONNMARK_MATCH - report_capability1 RAW_TABLE - report_capability1 IPP2P_MATCH - report_capability1 CLASSIFY_TARGET - report_capability1 ENHANCED_REJECT - report_capability1 KLUDGEFREE - report_capability1 MARK - report_capability1 XMARK - report_capability1 MANGLE_FORWARD - report_capability1 COMMENTS - report_capability1 ADDRTYPE - - echo CAPVERSION=$SHOREWALL_CAPVERSION -} - -# # Delete IP address # del_ip_addr() # $1 = address, $2 = interface @@ -1286,82 +885,6 @@ cut -b -${1} } -# -# Add a logging rule. -# -do_log_rule_limit() # $1 = log level, $2 = chain, $3 = display Chain $4 = disposition , $5 = rate limit $6=log tag $7=command $... = predicates for the rule -{ - local level=$1 - local chain=$2 - local displayChain=$3 - local disposition=$4 - local rulenum= - local limit= - local tag= - local command= - local prefix - local base=$(chain_base $displayChain) - local pf - - limit="${5:-$LOGLIMIT}" # Do this here rather than in the declaration above to appease /bin/ash. - tag=${6:+$6 } - command=${7:--A} - - shift 7 - - if [ -n "$tag" -a -n "$LOGTAGONLY" ]; then - displayChain=$tag - tag= - fi - - if [ -n "$LOGRULENUMBERS" ]; then - # - # Hack for broken printf on some lightweight shells - # - [ $(printf "%d" 1) = "1" ] && pf=printf || pf=$(mywhich printf) - - eval rulenum=\$${base}_logrules - - rulenum=${rulenum:-1} - - prefix="$($pf "$LOGFORMAT" $displayChain $rulenum $disposition)${tag}" - - rulenum=$(($rulenum + 1)) - eval ${base}_logrules=$rulenum - else - prefix="$(printf "$LOGFORMAT" $displayChain $disposition)${tag}" - fi - - if [ ${#prefix} -gt 29 ]; then - prefix=`echo "$prefix" | truncate 29` - error_message "WARNING: Log Prefix shortened to \"$prefix\"" - fi - - case $level in - ULOG) - $IPTABLES $command $chain $@ $limit -j ULOG $LOGPARMS --ulog-prefix "$prefix" - ;; - *) - $IPTABLES $command $chain $@ $limit -j LOG $LOGPARMS --log-level $level --log-prefix "$prefix" - ;; - esac - - if [ $? -ne 0 ] ; then - [ -z "$STOPPING" ] && { stop_firewall; exit 2; } - fi -} - -do_log_rule() # $1 = log level, $2 = chain, $3 = disposition , $... = predicates for the rule -{ - local level=$1 - local chain=$2 - local disposition=$3 - - shift 3 - - do_log_rule_limit $level $chain $chain $disposition "$LOGLIMIT" "" -A $@ -} - delete_tc1() { clear_one_tc() { @@ -1496,65 +1019,3 @@ echo echo } - -# Determine which version of mktemp is present (if any) and set MKTEMP accortingly: -# -# None - No mktemp -# BSD - BSD mktemp (Mandrake) -# STD - mktemp.org mktemp -# -find_mktemp() { - local mktemp=`mywhich mktemp 2> /dev/null` - - if [ -n "$mktemp" ]; then - if qt mktemp -V ; then - MKTEMP=STD - else - MKTEMP=BSD - fi - else - MKTEMP=None - fi -} - -# -# create a temporary file. If a directory name is passed, the file will be created in -# that directory. Otherwise, it will be created in a temporary directory. -# -mktempfile() { - - [ -z "$MKTEMP" ] && find_mktemp - - if [ $# -gt 0 ]; then - case "$MKTEMP" in - BSD) - mktemp $1/shorewall.XXXXXX - ;; - STD) - mktemp -p $1 shorewall.XXXXXX - ;; - None) - > $1/shorewall-$$ && echo $1/shorewall-$$ - ;; - *) - error_message "ERROR:Internal error in mktempfile" - ;; - esac - else - case "$MKTEMP" in - BSD) - mktemp /tmp/shorewall.XXXXXX - ;; - STD) - mktemp -t shorewall.XXXXXX - ;; - None) - rm -f /tmp/shorewall-$$ - > /tmp/shorewall-$$ && echo /tmp/shorewall-$$ - ;; - *) - error_message "ERROR:Internal error in mktempfile" - ;; - esac - fi -}