#!/bin/sh # # Shorewall6 Lite Packet Filtering Firewall Control Program - V4.2 # # This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt] # # (c) 2006,2007,2008,2009,2010 - Tom Eastep (teastep@shorewall.net) # # This file should be placed in /sbin/shorewall-lite. # # Shorewall documentation is available at http://shorewall.net # # This program is free software; you can redistribute it and/or modify # it under the terms of Version 2 of the GNU General Public License # as published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. # # If an error occurs while starting or restarting the firewall, the # firewall is automatically stopped. # # Commands are: # # shorewall6-lite dump Dumps all Shorewall-related information # for problem analysis # shorewall6-lite start Starts the firewall # shorewall6-lite restart Restarts the firewall # shorewall6-lite stop Stops the firewall # shorewall6-lite status Displays firewall status # shorewall6-lite reset Resets ip6tables packet and # byte counts # shorewall6-lite clear Open the floodgates by # removing all ip6tables rules # and setting the three permanent # chain policies to ACCEPT # shorewall6-lite show [ ... ] Display the rules in each listed # shorewall6-lite show log Print the last 20 log messages # shorewall6-lite show connections Show the kernel's connection # tracking table # shorewall6-lite show nat Display the rules in the nat table # shorewall6-lite show {mangle|tos} Display the rules in the mangle table # shorewall6-lite show tc Display traffic control info # shorewall6-lite show classifiers Display classifiers # shorewall6-lite show capabilities Display ip6tables/kernel capabilities # shorewall6-lite show vardir Display VARDIR setting # shorewall6-lite version Display the installed version id # shorewall6-lite logwatch [ refresh-interval ] Monitor the local log for Shorewall # messages. # shorewall6-lite drop
... Temporarily drop all packets from the # listed address(es) # shorewall6-lite reject
... Temporarily reject all packets from the # listed address(es) # shorewall6-lite allow
... Reenable address(es) previously # disabled with "drop" or "reject" # shorewall6-lite save [ ] Save the list of "rejected" and # "dropped" addresses so that it will # be automatically reinstated the # next time that Shorewall6-lite starts. # Save the current state so that 'shorewall6-lite # restore' can be used. # # shorewall6-lite forget [ ] Discard the data saved by 'shorewall6-lite save' # # shorewall6-lite restore [ ] Restore the state of the firewall from # previously saved information. # # shorewall6-lite ipaddr {
/ |
} # # Displays information about the network # defined by the argument[s] # # shorewall6-lite iprange
-
Decomposes a range of IP addresses into # a list of network/host addresses. # # shorewall6-lite ipdecimal {
| } # # Displays the decimal equivalent of an IP # address and vice versa. # # Set the configuration variables from shorewall6-lite.conf # get_config() { [ -n "$PATH" ] || PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages if ( ps ax 2> /dev/null | grep -v grep | qt grep 'syslogd.*-C' ) ; then LOGREAD="logread | tac" elif [ -r $LOGFILE ]; then LOGREAD="tac $LOGFILE" else echo "LOGFILE ($LOGFILE) does not exist!" >&2 exit 2 fi # # See if we have a real version of "tail" -- use separate redirection so # that ash (aka /bin/sh on LRP) doesn't crap # if ( tail -n5 /dev/null > /dev/null 2> /dev/null ) ; then realtail="Yes" else realtail="" fi [ -n "$FW" ] || FW=fw [ -n "LOGFORMAT" ] && LOGFORMAT="${LOGFORMAT%%%*}" [ -n "$LOGFORMAT" ] || LOGFORMAT="Shorewall:" if [ -n "$IP6TABLES" ]; then if [ ! -x "$IP6TABLES" ]; then echo " ERROR: The program specified in IP6TABLES does not exist or is not executable" >&2 exit 2 fi else IP6TABLES=$(mywhich ip6tables 2> /dev/null) if [ -z "$IP6TABLES" ] ; then echo " ERROR: Can't find iptables executable" >&2 exit 2 fi fi if [ -n "$SHOREWALL_SHELL" ]; then if [ ! -x "$SHOREWALL_SHELL" ]; then echo " WARNING: The program specified in SHOREWALL_SHELL does not exist or is not executable; falling back to /bin/sh" >&2 SHOREWALL_SHELL=/bin/sh fi fi [ -n "$RESTOREFILE" ] || RESTOREFILE=restore validate_restorefile RESTOREFILE [ -n "${VERBOSITY:=2}" ] [ -n "$g_use_verbosity" ] && VERBOSITY=$g_use_verbosity || VERBOSITY=$(($g_verbose_offset + $VERBOSITY)) g_hostname=$(hostname 2> /dev/null) } # # Verify that we have a compiled firewall script # verify_firewall_script() { if [ ! -f $g_firewall ]; then echo " ERROR: Shorewall6 Lite is not properly installed" >&2 if [ -L $g_firewall ]; then echo " $g_firewall is a symbolic link to a" >&2 echo " non-existant file" >&2 else echo " The file $g_firewall does not exist" >&2 fi exit 2 fi } # # Start Command Executor # start_command() { local finished finished=0 do_it() { local rc rc=0 [ -n "$nolock" ] || mutex_on if [ -x ${LITEDIR}/firewall ]; then run_it ${LITEDIR}/firewall $debugging start rc=$? else error_message "${LITEDIR}/firewall is missing or is not executable" logger -p kern.err "ERROR:Shorewall6 Lite start failed" rc=2 fi [ -n "$nolock" ] || mutex_off exit $rc } verify_firewall_script if shorewall6_is_started; then error_message "Shorewall6 is already running" exit 0 fi while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; f*) g_fast=Yes option=${option#f} ;; p*) [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system" PURGE=Yes option=${option%p} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done case $# in 0) ;; *) usage 1 ;; esac if [ -n "$g_fast" ]; then if qt mywhich make; then export RESTOREFILE make -qf ${CONFDIR}/Makefile || g_fast= fi if [ -n "$g_fast" ]; then g_restorepath=${VARDIR}/$RESTOREFILE if [ -x $g_restorepath ]; then echo Restoring Shorewall6 Lite... run_it $g_restorepath restore date > ${VARDIR}/restarted progress_message3 Shorewall6 Lite restored from $g_restorepath else do_it fi else do_it fi else do_it fi } # # Restart Command Executor # restart_command() { local finished finished=0 local rc rc=0 verify_firewall_script while [ $finished -eq 0 -a $# -gt 0 ]; do option=$1 case $option in -*) option=${option#-} while [ -n "$option" ]; do case $option in -) finished=1 option= ;; n*) NOROUTES=Yes option=${option#n} ;; p*) [ -n "$(which conntrack)" ] || fatal_error "The '-p' option requires the conntrack utility which does not appear to be installed on this system" PURGE=Yes option=${option%p} ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done case $# in 0) ;; *) usage 1 ;; esac [ -n "$nolock" ] || mutex_on if [ -x ${LITEDIR}/firewall ]; then run_it ${LITEDIR}/firewall $debugging restart rc=$? else error_message "${LITEDIR}/firewall is missing or is not executable" logger -p kern.err "ERROR:Shorewall6 Lite restart failed" rc=2 fi [ -n "$nolock" ] || mutex_off return $rc } # # Give Usage Information # usage() # $1 = exit status { echo "Usage: $(basename $0) [debug|trace] [nolock] [ -q ] [ -v[-1|{0-2}] ] [ -t ] " echo "where is one of:" echo " allow
..." echo " clear [ -f ]" echo " drop
..." echo " dump [ -x ]" echo " forget [ ]" echo " help" echo " load [ -s ] [ -c ] [ -r ] [ ] " echo " logdrop
..." echo " logreject
..." echo " logwatch []" echo " refresh [ ... ]" echo " reject
..." echo " reset [ ... ]" echo " restart [ -n ] [ -f ]" echo " restore [ -n ] [ ]" echo " save [ ]" echo " show [ -x ] [ -m ] [-f] [ -t {filter|mangle} ] [ {chain [ [ ... ]capabilities|classifiers|config|connections|filters|ip|log|macros|mangle|nat|policies|raw|routing|tc|vardir|zones} ]" echo " start [ -f ] [ ]" echo " stop [ -f ]" echo " status" echo " version [ -a ]" echo exit $1 } # # Execution begins here # debugging= if [ $# -gt 0 ] && [ "$1" = "debug" -o "$1" = "trace" ]; then debugging=$1 shift fi nolock= if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then nolock=nolock shift fi g_ipt_options="-nv" g_fast= g_verbose_offset=0 g_use_verbosity= NOROUTES= TIMESTAMP= RECOVERING= PURGE= finished=0 while [ $finished -eq 0 ]; do [ $# -eq 0 ] && usage 1 option=$1 case $option in -) finished=1 ;; -*) option=${option#-} [ -z "$option" ] && usage 1 while [ -n "$option" ]; do case $option in x*) g_ipt_options="-xnv" option=${option#x} ;; q*) g_verbose_offset=$(($g_verbose_offset - 1 )) option=${option#q} ;; f*) g_fast=Yes option=${option#f} ;; v*) option=${option#v} case $option in -1*) g_use_verbosity=-1 option=${option#-1} ;; 0*) g_use_verbosity=0 option=${option#0} ;; 1*) g_use_verbosity=1 option=${option#1} ;; 2*) g_use_verbosity=2 option=${option#2} ;; *) g_verbose_offset=$(($g_verbose_offset + 1 )) g_use_verbosity= ;; esac ;; n*) NOROUTES=Yes option=${option#n} ;; t*) TIMESTAMP=Yes option=${option#t} ;; -) finished=1 option= ;; *) usage 1 ;; esac done shift ;; *) finished=1 ;; esac done if [ $# -eq 0 ]; then usage 1 fi PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin MUTEX_TIMEOUT= SHAREDIR=/usr/share/shorewall6-lite CONFDIR=/etc/shorewall6-lite g_product="Shorewall6 Lite" [ -f ${CONFDIR}/vardir ] && . ${CONFDIR}/vardir ] [ -n "${VARDIR:=/var/lib/shorewall6-lite}" ] [ -d $VARDIR ] || mkdir -p $VARDIR || fatal_error "Unable to create $VARDIR" libraries="$SHAREDIR/lib.base $SHAREDIR/lib.cli" version_file=$SHAREDIR/version for library in $libraries; do if [ -f $library ]; then . $library else echo "Installation error: $library does not exist!" >&2 exit 2 fi done ensure_config_path config=$(find_file shorewall6-lite.conf) if [ -f $config ]; then if [ -r $config ]; then . $config else echo "Cannot read $config! (Hint: Are you root?)" >&2 exit 1 fi else echo "$config does not exist!" >&2 exit 2 fi ensure_config_path LITEDIR=${VARDIR} [ -f ${LITEDIR}/firewall.conf ] && . ${LITEDIR}/firewall.conf get_config g_firewall=$LITEDIR/firewall if [ -f $version_file ]; then SHOREWALL_VERSION=$(cat $version_file) else echo " ERROR: Shorewall6 Lite is not properly installed" >&2 echo " The file $SHOREWALL_VERSION_FILE does not exist" >&2 exit 1 fi banner="Shorewall6 Lite $SHOREWALL_VERSION Status at $g_hostname -" case $(echo -e) in -e*) RING_BELL="echo \a" ECHO_E="echo" ;; *) RING_BELL="echo -e \a" ECHO_E="echo -e" ;; esac case $(echo -n "Testing") in -n*) ECHO_N= ;; *) ECHO_N=-n ;; esac COMMAND=$1 case "$COMMAND" in start) shift start_command $@ ;; stop|reset|clear) [ $# -ne 1 ] && usage 1 verify_firewall_script run_it $g_firewall $debugging $nolock $COMMAND ;; restart) shift restart_command $@ ;; show|list) shift show_command $@ ;; status) [ $# -eq 1 ] || usage 1 [ "$(id -u)" != 0 ] && fatal_error "ERROR: The status command may only be run by root" echo "Shorewall6 Lite $SHOREWALL_VERSION Status at $g_hostname - $(date)" echo if shorewall6_is_started ; then echo "Shorewall6 Lite is running" status=0 else echo "Shorewall6 Lite is stopped" status=4 fi if [ -f ${VARDIR}/state ]; then state="$(cat ${VARDIR}/state)" case $state in Stopped*|Clear*) status=3 ;; esac else state=Unknown fi echo "State:$state" echo exit $status ;; dump) shift dump_command $@ ;; hits) [ -n "$debugging" ] && set -x shift hits_command $@ ;; version) echo $SHOREWALL_VERSION Lite ;; logwatch) logwatch_command $@ ;; drop) [ -n "$debugging" ] && set -x [ $# -eq 1 ] && usage 1 if shorewall6_is_started ; then [ -n "$nolock" ] || mutex_on block DROP Dropped $* [ -n "$nolock" ] || mutex_off else error_message "ERROR: Shorewall6 Lite is not started" exit 2 fi ;; logdrop) [ -n "$debugging" ] && set -x [ $# -eq 1 ] && usage 1 if shorewall6_is_started ; then [ -n "$nolock" ] || mutex_on block logdrop Dropped $* [ -n "$nolock" ] || mutex_off else error_message "ERROR: Shorewall6 Lite is not started" exit 2 fi ;; reject|logreject) [ -n "$debugging" ] && set -x [ $# -eq 1 ] && usage 1 if shorewall6_is_started ; then [ -n "$nolock" ] || mutex_on block $COMMAND Rejected $* [ -n "$nolock" ] || mutex_off else error_message "ERROR: Shorewall6 Lite is not started" exit 2 fi ;; allow) allow_command $@ ;; save) [ -n "$debugging" ] && set -x case $# in 1) ;; 2) RESTOREFILE="$2" validate_restorefile '' ;; *) usage 1 ;; esac g_restorepath=${VARDIR}/$RESTOREFILE [ "$nolock" ] || mutex_on save_config [ "$nolock" ] || mutex_off ;; forget) case $# in 1) ;; 2) RESTOREFILE="$2" validate_restorefile '' ;; *) usage 1 ;; esac g_restorepath=${VARDIR}/$RESTOREFILE if [ -x $g_restorepath ]; then if [ -x ${g_restorepath}-ipsets ]; then rm -f ${g_restorepath}-ipsets echo " ${g_restorepath}-ipsets removed" fi rm -f $g_restorepath rm -f ${g_restorepath}-iptables echo " $g_restorepath removed" elif [ -f $g_restorepath ]; then echo " $g_restorepath exists and is not a saved Shorewall6 configuration" fi rm -f ${VARDIR}/save ;; ipcalc) [ -n "$debugging" ] && set -x if [ $# -eq 2 ]; then address=${2%/*} vlsm=${2#*/} elif [ $# -eq 3 ]; then address=$2 vlsm=$(ip_vlsm $3) else usage 1 fi valid_address $address || fatal_error "Invalid IP address: $address" [ -z "$vlsm" ] && exit 2 [ "x$address" = "x$vlsm" ] && usage 2 [ $vlsm -gt 32 ] && echo "Invalid VLSM: /$vlsm" >&2 && exit 2 address=$address/$vlsm echo " CIDR=$address" temp=$(ip_netmask $address); echo " NETMASK=$(encodeaddr $temp)" temp=$(ip_network $address); echo " NETWORK=$temp" temp=$(broadcastaddress $address); echo " BROADCAST=$temp" ;; iprange) [ -n "$debugging" ] && set -x case $2 in *.*.*.*-*.*.*.*) for address in ${2%-*} ${2#*-}; do valid_address $address || fatal_error "Invalid IP address: $address" done ip_range $2 ;; *) usage 1 ;; esac ;; ipdecimal) [ -n "$debugging" ] && set -x [ $# -eq 2 ] || usage 1 case $2 in *.*.*.*) valid_address $2 || fatal_error "Invalid IP address: $2" echo " $(decodeaddr $2)" ;; *) echo " $(encodeaddr $2)" ;; esac ;; restore) shift STARTUP_ENABLED=Yes restore_command $@ ;; call) [ -n "$debugging" ] && set -x # # Undocumented way to call functions in ${SHAREDIR}/functions directly # shift $@ ;; help) shift usage ;; *) usage 1 ;; esac